Gibt es einen Hahn und Kolb Online Shop?

Take advantage of robust tool design with internal coolant and proven compatibility with AP-- 1604 indexable inserts for reliable chip control and consistent surface finish; order directly via Metav Werkzeuge or consult our specialists for selection and integration. Screw-in milling cutter by Teknik Makina — 42 mm dia, internal coolant, M16 thread The Screw-in milling cutter is a compact, internally cooled milling head designed for use with AP-- 1604 indexable inserts in industrial roughing and finishing tasks. *Internal coolant for effective chip evacuation *Compatible with AP-- 1604 Korloy indexable inserts *M16 screw connection for secure mounting *42 mm diameter with four cutting edges Precise interface for secure, vibration‑resistant mounting The robust M16 thread and engineered seating ensure a repeatable and secure connection to modular holders, reducing micro‑movement under load and improving tool life. A compact overall length of 60 mm and a modest mass support stable spindle dynamics, which translates into more consistent surface quality and less spindle wear. This mechanical reliability benefits production environments that require predictable, repeatable machining cycles and minimal setup adjustments. Internal coolant for improved chip control and tool life Integrated internal coolant channels deliver cutting fluid directly to the cutting zone, supporting efficient chip evacuation and temperature control. The targeted coolant supply reduces heat build-up at the edge and helps maintain insert life, which in turn lowers tooling cost per part. For operations where chip removal and thermal stability determine component quality, this feature decreases the frequency of unscheduled stops and contributes to higher overall equipment effectiveness. Optimised cutting geometry and compatibility for flexible operation Designed to accept AP-- 1604 indexable inserts from Korloy, the head accommodates a cutting height of 24 mm and four cutting edges for balanced engagement. The configuration offers a good compromise between material removal rate and surface finish, making the tool suitable for both roughing passes and semi‑finishing. Using standardised inserts simplifies inventory and reduces downtime when re‑grinding or replacement is required. Service-friendly fastening and clear identification for workshop use Fastening is secured with a Torx screw (M4x10) using a T15 key, enabling straightforward assembly and disassembly during insert changes or maintenance. The light weight (approx. 0.251 kg) and compact design make handling easy on the shop floor, while the clear SKU (VT170-1TM) allows simple reordering and stock tracking. These practical service features support smooth workflows and shorter tool change cycles in busy production settings. Contact Metav Werkzeuge for Teknik Makina tooling advice and a tailored recommendation from our Emmerich team, reachable by email or phone for technical clarifications and procurement guidance. Technical data SKU: VT170-1TM Brand: Teknik Makina Product type: Screw-in milling cutter Compatible inserts: AP-- 1604 (Korloy) Internal coolant: Yes Fastening: Torx screw M4x10 Core dimensions Diameter: 42 mm Overall length: 60 mm Thread height: 24.5 mm Cutting height: 24 mm Number of cutting edges: 4 Weight: 0.251 kg Features & special items M16 thread connection Internal coolant channels Torx key size: T15 Suitable for AP-- 1604 indexable inserts Fastening screw: M4x10 FAQ Which inserts fit this milling head? The tool accepts AP-- 1604 indexable inserts; the product is specified for Korloy inserts and retains full compatibility when using standard AP-- 1604 geometries. Does the head supply coolant directly to the cutting zone? Yes, the head features internal coolant channels that deliver fluid to the cutting edge for improved chip control and thermal management. What is the thread connection for mounting? Mounting is via an M16 screw connection to ensure secure and repeatable clamping of the milling head in the holder. How many cutting edges does the head provide and what is the cutting height? The milling head has four cutting edges and a cutting height of 24 mm, configured for balanced material removal and finish capability. What tool is required to change the insert screw? Insert fastening uses a Torx screw (M4x10) and requires a T15 Torx key for reliable tightening and serviceability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, targeted coolant delivery and proven insert compatibility to keep machining consistent and interruption-free; order directly via Metav Werkzeuge or consult the experts for application advice. VT150-1TM Screw-in Milling Cutter — 42 mm, L60 mm, internal coolant (Teknik Makina) The VT150-1TM Screw-in Milling Cutter is a compact, screw-clamped face milling solution designed for indexable APXT 1003 inserts, offering through-tool coolant and a rigid M16 connection for stable machining in production and jobbing environments. 42 mm diameter for stable cutting Internal coolant for improved tool life M16 screw-in connection, 24.5 mm thread height Compatible with APXT 1003 inserts (Korloy) Increased throughput with stable chip engagement A larger contact diameter delivers more consistent chip engagement and reduces vibration during passes. The 42 mm diameter and five cutting edges are balanced to increase material removal rates while maintaining surface quality, resulting in fewer passes and shorter cycle times. The screw-in fixing and ridged interface minimise runout, so machining tolerances remain predictable across repeated set-ups — a clear advantage for batch production and mixed-run workshop schedules. Targeted coolant flow for prolonged cutting performance Integrated coolant channels bring lubrication and cooling directly to the cutting zone, which reduces flank wear and thermal distortion. The internal coolant lowers operating temperatures and assists chip evacuation at the insert rake face, extending tool life and reducing regrind frequency. For operations sensitive to thermal growth, this targeted cooling helps maintain dimensional stability and improves consistency across long tool life windows. Simple insert management and secure fastening Designed for the widely used APXT 1003 indexable insert system and compatible with Korloy inserts, the cutter simplifies tooling logistics and reduces inventory complexity. The tool accepts standard fastening hardware (Torx key T8, fastening screw M2.5x5.5), enabling rapid insert changes and repeatable clamping torque. The combination of a common insert family and accessible fasteners cuts downtime for maintenance and keeps the production flow moving. Workshop-ready dimensions and handling benefits With an overall length of L60 mm, a thread height of 24.5 mm and a compact mass of 0.294 kg, the cutter is engineered for easy handling, quick mounting and a low moment of inertia in smaller spindles. The M16 thread offers a robust connection for intermediate cutting forces while remaining compatible with many standard adapter systems. The compact design supports efficient storage and rapid tool changes, which is particularly valuable in dynamic job-shop environments. Discuss application suitability with Metav Werkzeuge or request a tailored quote for the Teknik Cutting Tools VT150-1TM screw-in milling cutter with internal coolant — local stock and expert advice available from Emmerich. Technical data SKU: VT150-1TM Product: Screw-in milling cutter Compatible inserts: for APXT 1003 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 42 mm Overall length: 60 mm Thread: M16 Thread height: 24.5 mm Cutting edges: 5 Cutting-edge height: 36 mm Weight: 0.294 kg Internal coolant: yes Torx key: T8 Fastening screw: M2.5x5.5 Special features Compatible with APXT 1003 insert system (Korloy) Internal coolant for directed cooling and chip evacuation Screw-in connection for secure, low-runout mounting Compact format for easy handling and quick tool changes FAQ What insert type is required for this cutter? The VT150-1TM is designed for APXT 1003 indexable inserts; Korloy-specified APXT 1003 inserts are suitable for standard applications. Does the tool provide coolant to the cutting edge? Yes — the VT150-1TM features internal coolant that delivers lubricant and cooling directly to the cutting zone. How is the cutting head secured to the tool holder? The cutter uses an M16 screw-in connection with a 24.5 mm thread height for stable, low-runout mounting. What fastening hardware is used for the inserts? Insert clamping uses a Torx drive; the specified key is T8 with a fastening screw of M2.5x5.5. Is the VT150-1TM suitable for heavy roughing? The combination of a 42 mm diameter, five cutting edges and a robust screw-in interface makes the cutter appropriate for moderate to heavy machining, depending on machine power and cutting parameters; verify cutting data with Metav Werkzeuge for specific applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable screw-in clamping and a compact Ø42 mm cutting diameter for consistent, cost-efficient machining; its compatibility with BLMP 0603 indexable inserts ensures rapid insert changes and reduced downtime — order directly via Metav Werkzeuge or contact the consultants for tailored advice. Screw-in Milling Cutter VT196TM — Ø42 mm, M16 Thread (Teknik Makina) The Screw-in Milling Cutter VT196TM is a compact screw-in milling head engineered for general machining tasks using BLMP 0603 indexable inserts, offering secure clamping and straightforward tool changes. M16 screw-in thread for secure clamping Ø42 mm cutting diameter Compatible with BLMP 0603 inserts (Taegutec) Two cutting edges, 100° cutting angle Secure clamping for consistent, precise cuts A robust M16 thread combined with a screw-in clamping design gives the tool high rigidity and reduced runout, which directly improves surface finish and dimensional consistency. The compact Ø42 mm head and a modest overall length of 68 mm keep the tool close to the holder axis, increasing stability when face milling or profiling. At just 0.044 kg, the lightweight construction minimises inertia without sacrificing stiffness, so cycle times remain stable and tool life is optimised through repeatable mounting. Rapid insert changes that lower downtime Designed for BLMP 0603 indexable inserts, the cutter uses a single Torx M3x6.5 screw secured with a T8 key, enabling quick and safe insert replacement. The system of two cutting edges with a 100° cutting angle balances chip control and cutting forces for predictable behaviour across a range of steels and non-ferrous materials. Using indexable inserts reduces overall tooling cost since worn cutting edges are replaced rather than the whole body, translating into better uptime and a leaner consumables budget. Compact tool geometry for versatile workshop use The modest footprint of this screw-in head makes it suitable for tight setups and multi-spindle arrangements where clearance is limited. Compatibility with Taegutec BLMP 0603 insert variants extends tooling options and simplifies procurement. The combination of secure screw-in fixation, a standardised interface and the cutter’s geometry supports both single-part production and batch manufacturing, delivering practical benefits for small workshops and industrial lines alike. Metav’s logistics and quality filter in Emmerich ensure dependable supply and consistent product quality for production-critical tooling. For reliable integration into existing toolholders and expert guidance on insert selection, contact Metav Werkzeuge for personalised advice and fast dispatch from Emmerich. Technical data Article number: VT196TM Designation: Screw-in milling cutter for BLMP 0603 indexable inserts Manufacturer: Teknik Cutting Tools / Teknik Makina Brand: Teknik Makina Facts Diameter: 42 mm Overall length: 68 mm Thread: M16 Screw-in thread height: 25 mm Cutting height: 25 mm Cutting edges: 2 Cutting angle: 100° Weight: 0.044 kg Special features Compatible with BLMP 0603 indexable inserts Suitable for inserts from Taegutec Torx screw: M3x6.5 Torx key size: T8 Compact screw-in design Two-flute cutting geometry FAQ Which indexable inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; compatible Taegutec variants are suitable for the VT196TM head and offer a wide choice of grades. How is the cutter secured in the toolholder? The tool uses an M16 screw-in thread for clamping; the secure screw-in connection on the VT196TM provides high axial and radial rigidity. What fastener is required to change an insert? Insert clamping is via a Torx M3x6.5 screw tightened with a T8 key, enabling quick and reliable insert changes on the VT196TM. Which machining tasks is this head best for? With a Ø42 mm diameter and two cutting edges, the cutter is suited to face milling, light profiling and finishing operations where compact geometry and stability are required. Is the cutter compatible with other insert manufacturers? The VT196TM is designed for BLMP 0603 format inserts; many manufacturers offer compatible BLMP 0603-type inserts — Taegutec variants are explicitly compatible. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, stable screw-in milling solution that combines 42 mm cutting diameter with a robust M16 mounting for reliable machining and fast indexable insert changes; order directly via Metav Werkzeuge or consult the specialists for application-specific advice. Screw-in milling cutter for BLMP 0904 indexable inserts by Teknik Makina — 42 mm, L 68 mm The Screw-in milling cutter for BLMP 0904 indexable inserts is designed as a compact, screw-mounted cutter for economical face milling and light to medium machining tasks where fast insert changes and repeatable positioning are required. 42 mm cutting diameter Compatible with BLMP 0904 inserts 5 cutting edges for efficient material removal Robust M16 screw-in connection High compatibility for predictable machining results This screw-in cutter offers a 42 mm nominal diameter and is built specifically for use with BLMP 0904 indexable inserts, ensuring a standardised cutting geometry across applications. The fixed interface design provides consistent radial and axial positioning, which translates into predictable toolpaths and simplified process planning. Using industry-standard inserts from Taegutec reduces procurement complexity and allows easy sourcing of cutting edges for high availability in production environments. Secure mounting and quick serviceability to reduce downtime A solid M16 screw-in connection with a thread engagement of 23 mm secures the head to the adaptor or holder, delivering mechanical stability during interrupted cuts. Indexable inserts are retained with a torx screw (T10 key) and screw specification M3.5x8.5, enabling fast, repeatable insert changes with common workshop tools. These features combine to cut setup and maintenance time, supporting steady production flow and lower overall tooling costs for repetitive tasks. Designed for efficient cutting with durable construction With 5 cutting edges and a cutting-edge height of 45 mm, the tool balances chip evacuation and cutting capacity for light to medium milling operations. The total length of 68 mm and a tool mass of 0.345 kg make the assembly compact and easy to handle during tool changeovers while maintaining rigidity at the cutting zone. The result is improved productivity through longer effective cutting time and consistent surface quality when paired with matching inserts. For tailored advice on integrating this Teknik Makina screw-in cutter into specific machining setups, contact Metav Werkzeuge — our consultants can help select the right inserts and holders for the intended application. Technical data SKU: VT268TM Label: 42mm Einschraubfräser BLMP 0904 L68mm Product type: Screw-in milling cutter Manufacturer: Teknik Makina Facts Diameter: 42 mm Total length: 68 mm Cutting-edge height: 45 mm Thread height: 23 mm Weight: 0.345 kg Number of cutting edges: 5 Special features For BLMP 0904 indexable inserts Compatible with Taegutec inserts Torx screw: M3.5x8.5 Torx key: T10 SKU: VT268TM Manufacturer: Teknik Makina FAQ What inserts are compatible with this cutter? The cutter is specified for BLMP 0904 indexable inserts; compatibility with Taegutec BLMP 0904 grades is confirmed. How is the insert secured and which key is required? Inserts are fastened with a torx screw M3.5x8.5 requiring a T10 torx key for removal and replacement. What is the mounting interface of the cutter? The tool uses a screw-in mounting with an M16 thread and a thread engagement of 23 mm for secure attachment. Can this cutter be used for heavy roughing operations? The design with 5 cutting edges supports efficient material removal in light to medium milling; for heavy roughing, check machine power and recommended insert grades. What is the SKU for ordering and cross-referencing? The SKU for this item is VT268TM, listed as a 42 mm screw-in milling cutter for BLMP 0904 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and secure M16 mounting for consistent chip control and low downtime; order the VT236-1TM directly via Metav Werkzeuge or ask our consultants if needed. VT236-1TM screw-in cutter — 42 mm diameter, internal coolant (Teknik Makina) VT236-1TM screw-in cutter for precision face milling in compact toolholders, compatible with EPMT 0603 indexable inserts 42 mm diameter for tight setups Internal coolant for improved chip evacuation Compatible with EPMT 0603 indexable inserts M16 thread with 40 mm thread height Maximise throughput in small toolrooms The compact 42 mm diameter head delivers a high metal-removal rate in limited spaces while preserving machine dynamics. With six cutting edges, the tool balances load distribution across the insert array, reducing vibration and spreading wear. The short overall length of 65.3 mm contributes to improved rigidity at the cutting zone, which in turn reduces chatter and enhances surface finish. The result is a reliable milling solution tailored for efficient series work where space and process stability matter. Fast indexability and secure clamping for steady cycles Designed for the EPMT 0603 indexable insert system and compatible with Hitachi inserts, the cutter enables quick insert changes and predictable cutting data. The M16 thread and 40 mm thread engagement ensure a firm connection to the holder, while the supplied T8 Torx key and M2.5x5.5 Torx screws secure the inserts with consistent torque. This configuration reduces intervention time during tool changes and lowers the effective cost per cutting edge — a direct advantage for throughput-driven operations. Coolant-fed design and sensible serviceability The internal coolant channel supports directed cooling and chip evacuation right at the cutting edge, extending tool life and improving process reliability. The cutter’s cutting-edge height of 25.3 mm and modest weight of 0.3 kg make handling and balancing straightforward during setup. Maintenance routines remain concise: fast screw access and standard insert geometry simplify stock management and inventory planning, contributing to a continuous production flow with fewer interruptions. For a reliable upgrade to compact, coolant-fed milling choose Teknik Makina’s VT236-1TM and contact Metav Werkzeuge for tailored technical advice and supply coordination. Technical data SKU: VT236-1TM Product: screw-in cutter Brand: Teknik Makina Insert system: EPMT 0603 Compatible inserts: Hitachi Facts Diameter: 42 mm Overall length: 65.3 mm Weight: 0.3 kg Thread: M16 Thread height: 40 mm Cutting edges: 6 Cutting-edge height: 25.3 mm Special features Internal coolant Torx key: T8 Torx screws: M2.5x5.5 Suitable for indexable inserts EPMT 0603 Compact design for reduced overhang FAQ Which insert type is used with this cutter? The cutter accepts EPMT 0603 indexable inserts; the VT236-1TM is prepared for this geometry. Is the tool equipped for internal coolant supply? Yes, the VT236-1TM features internal coolant to support chip evacuation and tool-life stability. What thread is required for mounting the cutter? Mounting requires an M16 thread with 40 mm thread engagement as used on the VT236-1TM. How many cutting edges does the cutter have? The tool is fitted with six cutting edges, providing balanced cutting and extended edge life. Are replacement screws and keys standard sizes? Yes, the recommended fastening hardware is M2.5x5.5 Torx screws tightened with a T8 key supplied for the VT236-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust 42 mm diameter head with an M16 screw connection and five cutting edges for sustained productivity. Order the screw-in cutter directly via Metav Werkzeuge or consult our specialists for application support. Screw-in cutter VT320TM — 42 mm diameter, M16 thread (for LOGU 0303 indexable inserts) by Teknik Makina A screw-in cutter engineered for secure M16 mounting and fast insert changes with LOGU 0303 indexable inserts, optimised for stable milling operations 42 mm diameter for robust material removal M16 screw mounting for secure attachment Compatible with LOGU 0303 indexable inserts Five cutting edges for extended productivity Consistent machining performance with compact design The compact head geometry pairs a 42 mm diameter with an M16 thread, creating a balance between rigidity and accessibility for confined set-ups. This arrangement reduces vibration transmission, which helps to maintain consistent surface quality over long runs. The tool body is configured for indexed insert use, enabling predictable chip evacuation and straightforward repeatability in serial production. Emphasis on dimensional stability means fewer rechecks and a smoother workflow on production lines where tool-change reliability is essential. Fast insert changeover and secure fastening Compatibility with LOGU 0303 indexable inserts and manufacturer alignment for Kyocera inserts simplifies tooling logistics and reduces downtime during swaps. The head uses a Torx T8 fastening interface and M3x7 Torx screws, which ensures repeatable clamp force and eliminates guesswork at the bench. Faster index changes lead directly to higher machine availability; in practice this reduces non-productive time, helping teams to keep cycle times tight without compromising on hold or concentricity. Robust build that supports steady operation With an overall length of 68 mm and a moderate mass of 0.34 kg, the milling head offers a stable centre of gravity for predictable dynamics in both light and heavier cuts. The five cutting edges deliver an extended effective engagement per tool life cycle, spreading wear more evenly and allowing for longer intervals between insert replacements. These attributes support continuous production runs where reliability and repeatable results are priorities rather than occasional convenience. Practical use cases and integration benefits The VT320TM head is suitable wherever indexed insert systems are preferred for rapid recovery and consistent part tolerances. The combination of secure M16 mounting and five cutting edges supports operations that demand both productivity and quick reaction to tool wear. Its straightforward interface with established insert families reduces the need for special holding fixtures and eases inventory management, allowing procurement and workshop teams to focus on process optimisation rather than bespoke tooling. For precision machining projects, contact Metav Werkzeuge to source the Teknik Makina screw-in cutter VT320TM with M16 mounting and LOGU 0303 compatibility—our Emmerich-based team can advise on integration and availability. Technical data SKU: VT320TM Label: 42 mm screw-in cutter LOGU 0303 L68mm Manufacturer: Teknik Makina Facts Diameter: 42 mm Total length: 68 mm Thread height: 23 mm Cutting-edge height: 45 mm Weight: 0.34 kg Cutting edges: 5 Thread: M16 ECLASS: 21180806 Special features For LOGU 0303 indexable inserts Compatible with Kyocera insert families Torx T8 fastening interface Torx screw M3x7 FAQ Which inserts fit this head? The screw-in cutter accepts LOGU 0303 indexable inserts; it is specified for Kyocera-compatible insert geometries and clamping. What is the mounting thread and how secure is it? The head uses an M16 screw mounting; the M16 connection provides a secure attachment for stable milling under typical production forces. How many cutting edges are available and what is the benefit? This head has five cutting edges, which spreads wear and extends effective tool life between insert changes. Which tool is required for the fastening screws? Fastening is performed via a Torx T8 interface with M3x7 Torx screws to ensure consistent clamp force and repeatable seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of solid clamping, compact dimensions and straightforward maintenance for reliable milling performance; compatible with RDMT 1003 indexable inserts and secured with an M3.5 locking screw. Order the Einschraubfräser directly via Metav Werkzeuge or consult the technical team if required. Einschraubfräser — screw-in milling cutter with M16 thread and Ø42 mm diameter (Teknik Makina) The Einschraubfräser is a screw-in milling cutter designed to accept RDMT 1003 indexable inserts, suitable for precision face and light shoulder milling in diverse workshop and production environments. M16 threaded screw-in holder 42 mm cutting diameter Five cutting edges for stable cutting Includes M3.5 locking screw and T15 key Predictable clamping for consistent machining quality The screw-in holder provides a secure M16 thread connection that reduces vibration and runout at the tool interface. Fitted for RDMT 1003 indexable inserts, the design enables rapid insert changes while maintaining repeatable positioning; this translates to fewer set-up interruptions and more predictable part tolerances. The combination of compact geometry and a stable connection helps to protect insert edges, prolonging tool life and reducing unplanned tool changes. Faster servicing and minimal downtime The cutter is secured by an M3.5 locking screw and is supplied with a Torx T15 key for straightforward removal and refitting of the insert screw (M3.5x8.5). This familiar fastening system simplifies routine maintenance and reduces the time needed for insert rotation or replacement. Clear access to the fastening elements means maintenance tasks can be completed quickly at the machine, supporting higher machine availability and improved process flow. Compact design for tight set-ups and flexible integration With a 42 mm cutting diameter and 60 mm overall length, the tool suits operations where space is restricted or where close tool-to-workpiece clearance is required. The thread height of 24.5 mm and a cutting height of 35.5 mm provide defined engagement depth for controlled cutting, while the modest weight of 0.265 kg assists in reducing centrifugal load on spindles in high-speed applications. The compact profile also supports close-packed tool layouts on multi-spindle heads and small machining centres. Built for workshop reliability and compatibility The straightforward screw-in concept pairs well with standard indexable insert systems and offers compatibility with established clamping routines. The robust mechanical fastening and clear specifications support procurement and tool planning: the consistent interface reduces the need for bespoke adapters and simplifies inventory management for production tooling. Contact Metav Werkzeuge to discuss Teknik Makina’s VT110TM screw-in milling cutter, confirm compatibility with existing tooling and secure delivery from our Emmerich warehouse. Technical data SKU: VT110TM Manufacturer: Teknik Makina Product: Einschraubfräser for RDMT 1003 Indexable Inserts Core specifications Diameter: 42 mm Thread: M16 Cutting edges: 5 Overall length: 60 mm Thread height: 24.5 mm Cutting height: 35.5 mm Weight: 0.265 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Features & compatibility Compatible with RDMT 1003 indexable inserts Screw-in holder design for secure clamping Compact dimensions for tight setups Rapid insert change via standard Torx fastening FAQ Which inserts are suitable for this screw-in milling cutter? The tool accepts RDMT 1003 indexable inserts; use the appropriate insert grade for the material and application to achieve required surface finish and tool life. What is the thread connection and SKU of the cutter? The holder has an M16 thread and is supplied under SKU VT110TM by Teknik Makina. How many cutting edges does the tool provide? The design accommodates five cutting edges, providing balanced cutting performance and stable chip load distribution. Is a key supplied for assembly and servicing? Yes, the cutter specification includes a Torx T15 key and the locking screw is M3.5, enabling straightforward insert servicing. Which materials can be machined with this arrangement? Material suitability depends primarily on the selected insert grade; the tool itself is specified for use with RDMT 1003 inserts, which should be chosen according to the intended workpiece material and cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure M16 screw-in mounting, a Ø 42 mm cutting diameter and compatibility with APKT 1604 indexable inserts to speed set-up and maintain consistent surface quality; order the VT170TM screw-in cutter directly via Metav Werkzeuge or ask our consultants if needed VT170TM screw-in cutter – for APKT 1604 indexable inserts, Ø 42 mm (Teknik Makina) A screw-in cutter designed for face milling and shoulder work, combining a robust M16 thread with a 90° cutting angle for dependable mounting and predictable milling geometry Ø 42 mm cutting diameter Secure M16 screw-in thread 90° cutting angle for square shoulders Compatible with APKT 1604 indexable inserts Stable mounting for repeatable machining quality The VT170TM features a solid M16 screw-in connection and a dedicated Torx M4x10 fastening screw, tightened with a T15 key, which together reduce micro-movements at the tool seat. This mechanical stability lowers the risk of chatter, delivers consistent cutting geometry across batches and supports predictable tolerances in production. The result is fewer rejects and less time spent on rework, improving throughput in small-batch and serial milling alike. Geometry engineered for efficient face milling A Ø 42 mm cutter body with a 90° cutting angle and four cutting edges provides a balance between material removal and surface finish. The axial and radial proportions offer effective chip evacuation while maintaining a stable cutting line for square shoulders and pocketing. The specified cutting height of 35.5 mm ensures sufficient engagement with the insert, helping to sustain cutting performance under typical face-milling conditions and reducing the need for excessive finishing passes. Fast insert changes and broad compatibility This indexable system accepts APKT 1604 inserts and is compatible with Korloy-manufactured plates, enabling straightforward supply management and quick replacements on the shop floor. The Torx-secured clamping allows short tool-change cycles and reliable seating of the insert, which supports uninterrupted production runs. For operations using standard APKT plates, the tool reduces setup complexity and keeps machine idle time to a minimum. Lightweight handling with compact dimensions for workshop use Weighing just 0.251 kg and measuring 60 mm overall with a thread height of 24.5 mm, the cutter is easy to handle during tool preparation and fits compact tool magazines without adding excess inertia. Its modest mass aids safe manual handling and quick mounting, while the compact length suits machines with limited clearance. These physical attributes contribute to efficient tool logistics and faster cycle preparation in mixed-production environments. For reliable face-milling performance with Teknik Makina’s VT170TM and swift supply from Europe, contact Metav Werkzeuge in Emmerich for expert advice and immediate availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT170TM Manufacturer: Teknik Makina Name: screw-in cutter Compatible inserts: APKT 1604 Facts Diameter: 42 mm Overall length: 60 mm Cutting height: 35.5 mm Thread height: 24.5 mm Thread: M16 Cutting edges: 4 Weight: 0.251 kg Cutting angle: 90° Special features Torx screw: M4x10 Torx key size: T15 Compatible insert manufacturer: Korloy Suitable for APKT 1604 indexable inserts FAQ Which inserts fit this tool? The VT170TM is designed for APKT 1604 indexable inserts and is compatible with Korloy APKT plates. What is the mounting thread and how is the insert secured? Mounting uses an M16 screw-in thread; the insert is fixed with a Torx M4x10 screw tightened with a T15 key. What are the cutter diameter and cutting angle? The cutter has a Ø 42 mm diameter and a 90° cutting angle suitable for square-shoulder milling. How many cutting edges and what are the tool dimensions? The tool offers four cutting edges, an overall length of 60 mm and a cutting height of 35.5 mm. Is the tool suitable for quick changeover in production? Yes, the Torx-secured clamping and standard APKT 1604 interface enable short change cycles and simple insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure mounting, straightforward insert replacement and stable geometry for consistent milling performance; order the VT150TM screw-in cutter directly via Metav Werkzeuge or ask our consultants if needed VT150TM screw-in cutter by Teknik Makina – Ø42 mm, M16 thread A VT150TM screw-in cutter designed for use with APKT 1003 indexable inserts, offering compact dimensions and a robust M16 mounting for reliable CNC milling setups Ø42 mm diameter for compact milling heads M16 screw-in mounting for stable clamping Compatible with APKT 1003 indexable inserts Fast insert changes that save setup time The screw-in cutter is engineered for rapid indexable-insert replacement, significantly reducing downtime in production. The insert fastening is secured with a Torx M2.5x5.5 screw actuated by a T8 key, ensuring repeatable clamping torque and minimised play. This arrangement means inserts are retained securely while still being straightforward to exchange; unskilled operators can be instructed quickly and maintenance remains efficient. The compact head and standardised fixing reduce tool change complexity and support lean workflow practices on the shop floor. Stable mounting and precise cutting geometry A solid M16 thread and a screw-in depth of 24.5 mm provide a rigid connection to the toolholder, which reduces vibration and enhances surface finish consistency. The cutter’s Ø42 mm diameter and overall length of 60 mm combine with a cutting height of 35.5 mm to offer a balance between reach and stiffness. With 5 cutting edges and a 90° cutting angle, the toolhead maintains cutting stability across a variety of operations. The low mass of 0.294 kg contributes to dynamic stability at typical spindle speeds while keeping inertial loads manageable for tool changers and automatic systems. Designed for proven insert systems and straightforward logistics Compatibility with APKT 1003 indexable inserts from Korloy allows the integration of widely available grades and geometries, giving process planners flexibility when specifying grades for different tasks. The cutter’s configuration supports efficient inventory management by aligning with common insert ranges. The compact design and familiar thread standards mean replacement and stocking are uncomplicated; the machining cell benefits from predictable tool behaviour and simplified procurement. Practical benefits for production and workshop use Specifying the VT150TM as part of a tooling package brings operational advantages: the standardised mount and screw fixings reduce set-up variance, the multi-edge head extends effective cutting life before an index is required, and the lightweight construction aids faster acceleration during cyclic machining. The tool is suitable where quick insert swaps and a compact, rigid head are priorities. Detailed dimensions and fastening data are provided below to assist integration into existing toolholding schemes and CAM tool libraries. Contact Metav Werkzeuge for tailored advice and procurement from the Emmerich hub; discussion on tool compatibility and delivery can be arranged via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VT150TM Manufacturer: Teknik Makina Product type: Screw-in cutter Diameter: 42 mm Thread: M16 Total length: 60 mm Screw-in depth: 24.5 mm Cutting height: 35.5 mm Number of cutting edges: 5 Cutting angle: 90° Weight: 0.294 kg Torx screw: M2,5x5,5 Torx key size: T8 Compatible inserts: APKT 1003 Insert compatibility note: referenced as APXT 1003 in some documentation Suitable insert manufacturer: Korloy SKU: VT150TM FAQ Which inserts fit this cutter? The VT150TM is specified for APKT 1003 indexable inserts; the tool is set up to accept common grades supplied by Korloy for that insert family. What fastening hardware is required to change an insert? Insert retention uses a Torx screw sized M2.5x5.5; a T8 Torx key is required for tightening and loosening. What are the key mounting dimensions for integration? The cutter mounts via an M16 screw-in thread with a screw-in depth of 24.5 mm and an overall length of 60 mm. How many cutting edges are available per head? The milling head provides 5 cutting edges, supporting index changes without full-tool replacement. What is the cutter’s diameter and cutting height? The head diameter is 42 mm with a cutting height of 35.5 mm, delivering a compact but rigid geometry for many milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable coolant-fed performance, robust thread-in mounting and precise compatibility with BLMP 0904 indexable inserts for consistent machining results; order the cutter directly via Metav Werkzeuge or ask the consultants for application advice. Screw-in milling cutter VT268-1TM — 42 mm diameter, internal coolant (Teknik Makina) The Screw-in milling cutter VT268-1TM is a coolant-fed, thread-in tool designed for efficient face and shoulder milling using BLMP 0904 indexable inserts in production and job-shop environments. 42 mm cutting diameter Integrated internal coolant Compatible with BLMP 0904 inserts Five cutting edges for efficient removal Taegutec insert compatibility High material removal with a compact, coolant-fed design The cutter delivers high material removal rates through a combination of a 42 mm cutting diameter and a five-edge configuration, making it suitable for medium to heavy milling operations where cycle time matters. The internal coolant channel feeds cutting fluid directly to the insert seat, reducing heat at the cutting zone and prolonging insert life. The thread-in mounting produces a rigid connection to the toolholder, which contributes to consistent surface finish and repeatable tolerances on series parts. Clear benefits from coolant delivery and thermal control Direct coolant supply to the cutting area improves chip evacuation and reduces built-up edge formation, resulting in longer uninterrupted cutting periods and fewer tool changes. With a 45 mm cutting height and targeted coolant flow, the design lowers thermal loads on both tool and workpiece, helping to maintain dimensional stability during longer cycles. These technical advantages translate into measurable economy by raising first-pass yield and limiting unplanned stoppages. Robust compatibility and straightforward maintenance Engineered for BLMP 0904 indexable inserts and compatible with Taegutec insert fittings, the cutter simplifies procurement and inventory by matching common insert families. The fastening uses a M3.5x8.5 Torx screw operated with a T10 Torx key, enabling quick insert replacement and secure seating without specialised tooling. The thread dimensions and secure screw fixation ensure repeatable seating, which reduces set-up time and increases productive spindle hours. Practical handling, mounting and workshop integration With an overall length of 68 mm and a lightweight construction of approximately 0.342 kg, the tool balances rigidity with manageable mass for most modern toolholders. The M16 thread and thread engagement height of 23 mm provide a secure thread-in connection that is compatible with standard clamping systems, offering fast tool changes and reliable concentricity. Clear identification by SKU VT268-1TM aids stock management and traceability in busy workshop inventories. For specific machining data, availability and tailored recommendations for the Teknik Makina VT268-1TM screw-in milling cutter with internal coolant, contact Metav Werkzeuge in Emmerich for prompt consultation and supply Technical data SKU: VT268-1TM Manufacturer: Teknik Makina Tool type: screw-in milling cutter Core specifications Cutting diameter: 42 mm Overall length: 68 mm Thread: M16 Thread engagement height: 23 mm Cutting height: 45 mm Number of cutting edges: 5 Weight: 0.342 kg Torx screw: M3.5x8.5 Torx key: T10 Materials & features Internal coolant Compatible with BLMP 0904 indexable inserts Suitable for Taegutec inserts Thread-in mounting design Compact, production-oriented geometry FAQ Which inserts fit this screw-in cutter? The cutter accepts BLMP 0904 indexable inserts; it is specified for use with compatible Taegutec insert variants and insert clamping via the M3.5x8.5 Torx screw. Is the tool coolant-fed and how does that affect performance? Yes, the VT268-1TM has internal coolant which improves chip evacuation and heat control, extending insert life and stabilising machining results. What are the mounting details for the tool? The cutter uses a thread-in mounting with an M16 thread and 23 mm engagement height for secure seating in standard holders. How many cutting edges does the tool have and what is the cutting height? The tool is furnished with five cutting edges and offers a cutting height of 45 mm for deeper engagement per pass. Which Torx key and screw are required for insert changes? Insert clamping uses a M3.5x8.5 Torx screw and requires a T10 Torx key for secure and rapid insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a secure M16 screw-in connection and a generous 42 mm cutting diameter for steady, repeatable milling results; order directly via Metav Werkzeuge or consult our technical advisors for specification support. VT236TM screw-in cutter by Teknik Makina — 42 mm diameter, M16 thread A VT236TM screw-in cutter designed for milling with EPMT 0603 indexable inserts, ideal where stable mounting and reliable chip evacuation are required in production and repair settings M16 screw-in connection for secure mounting 42 mm cutting diameter for broad engagement Compatible with EPMT 0603 indexable inserts Six cutting edges for steady material removal Secure connection for reduced runout and consistent results The screw-in design with an M16 thread and a thread engagement depth of 40 mm provides a rigid interface that reduces vibration and runout during milling. This stability translates directly into longer insert life and more uniform component quality, because the insert holder remains firmly seated under cutting loads. At a nominal weight of 0.3 kg, the toolholder balances enough mass for stable cutting while avoiding excessive spindle load, supporting consistent cutting conditions across repeated cycles. Robust cutting geometry for dependable chip control With a 42 mm diameter, six cutting edges and a cutting height of 25.3 mm, the geometry of this tool is configured for reliable chip formation and evacuation. The geometry includes a 93° cutting angle that supports efficient engagement in peripheral and shoulder milling operations; the high cutting height enables deeper axial engagement where required without compromising stiffness. These parameters are expressed to help production planners match the toolholder to machining strategies and select appropriate feeds and speeds for the intended indexable inserts. Designed for compatible inserts and straightforward assembly Engineered specifically for EPMT 0603 indexable inserts and compatible with inserts from Hitachi, the holder simplifies inventory management where that insert family is standard. Assembly and clamping use a Torx screw M2.5x5.5 with a T7 key interface for quick, repeatable insert changes and secure seating. The overall length of 65.3 mm makes the tool suitable for standard toolholder envelopes while the precise screw-in mounting ensures the cutter sits concentrically in the spindle. For guidance on matching inserts or optimising cutting parameters, Metav’s product information and data sheet support integration into existing tool systems. For Teknik Cutting Tools components such as the VT236TM, contact Metav Werkzeuge for detailed integration advice and assured delivery from our Emmerich hub — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT236TM Manufacturer: Teknik Makina For inserts: EPMT 0603 Compatible insert maker: Hitachi Facts Diameter: 42 mm Thread: M16 Thread engagement height: 40 mm Cutting height: 25.3 mm Number of cutting edges: 6 Total length: 65.3 mm Cutting angle: 93° Weight: 0.3 kg Special features For EPMT 0603 indexable inserts Compatible with Hitachi inserts Torx screw M2.5x5.5 required Torx key size T7 for assembly Screw-in mounting for secure seating Six cutting edges for steady chip removal FAQ Which indexable inserts fit this cutter? The VT236TM is designed for EPMT 0603 indexable inserts and is specified as compatible with inserts from Hitachi. How is the cutter fixed to the toolholder? Fixing is by screw-in with an M16 thread (40 mm engagement); the insert clamping uses a Torx screw M2.5x5.5 and a T7 key interface. What are the main dimensions to consider for setup? Key dimensions: 42 mm diameter, 25.3 mm cutting height, 65.3 mm total length and a weight of 0.3 kg for the VT236TM. How many cutting edges does the tool have and why does that matter? The tool has six cutting edges, which supports smoother chip formation and more even wear distribution across the inserts during continuous milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a stable M16 screw-in mounting and five cutting edges for consistent metal removal and longer tool life; order directly via Metav Werkzeuge or consult our specialists for integration into production. VT110-1TM screw-in milling cutter — 42 mm, internal coolant (for RDMT 1003 inserts) — Teknik Makina A VT110-1TM screw-in milling cutter engineered for reliable pocket and face milling operations with RDMT 1003 indexable inserts, offering compact overall length and coolant-fed chip evacuation for production and workshop environments 42 mm diameter head Internal coolant supply M16 screw-in thread Compatible with RDMT 1003 inserts Five cutting edges for stable cutting High cutting performance with coolant-fed chip control The cutter’s combination of a 42 mm diameter head and internal coolant supply improves cutting stability and keeps the cutting zone clear, which reduces built-up edge and improves surface finish. With five precision ground edges the tool provides continuous material removal while distributing cutting forces, resulting in smoother machining cycles and fewer insert changes. The integrated coolant channel also aids in temperature control, which contributes to longer insert life and predictable process outcomes. Robust mounting and straightforward maintenance A screw-in design with an M16 thread and a thread height of 24.5 mm ensures secure, repeatable mounting in compatible arbors or adapters. The compact 60 mm overall length and low mass (0.265 kg) reduce overhang and minimise vibration, improving dimensional accuracy on the machined component. The head is fastened using a Torx T15 drive and a M3.5x8.5 fixing screw for controlled clamp force and simple service routines. Economical operation with indexable inserts Designed for RDMT 1003 indexable inserts, the tool body enables rapid insert changes and economical reconditioning compared with brazed solutions. The 35.5 mm cutting-edge height provides generous edge engagement for many milling tasks while maintaining ease of access during replacement. Using standard indexable inserts keeps running costs predictable and minimises downtime in production environments where cycle time and throughput are critical. Integration into production and workshop workflows Produced by Teknik Makina, this screw-in milling head is suitable for both single-machine set-ups and clustered production cells where compact tooling and coolant delivery are required. The tool’s specification supports controlled feeds and stable surface generation, making it a practical choice for shops seeking a balance between flexibility and process reliability. For technical questions on mounting or application parameters, Metav Werkzeuge offers product advice and supply chain continuity from Emmerich. For detailed application support and to arrange supply of the VT110-1TM screw-in milling cutter from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical Data Article number: VT110-1TM Product type: Screw-in milling cutter Brand: Teknik Makina Eclass: 21180806 Facts Diameter: 42 mm Overall length: 60 mm Thread: M16 Thread height: 24.5 mm Cutting-edge height: 35.5 mm Number of cutting edges: 5 Weight: 0.265 kg Torx key: T15 Torx screw: M3.5x8.5 Special features Internal coolant For RDMT 1003 indexable inserts Screw-in mounting design FAQ Which indexable inserts fit this tool? The VT110-1TM screw-in milling cutter is specified for RDMT 1003 indexable inserts and is optimised for their geometry and seating. Is the tool coolant-fed? Yes, the cutter features internal coolant delivery to the cutting zone to support chip evacuation and thermal control. What is the mounting thread and how secure is it? Mounting is via an M16 screw-in thread with a 24.5 mm thread height to ensure a repeatable and secure fit. How many cutting edges does the head provide? The head carries five cutting edges, providing continuous cutting and balanced force distribution during milling. Are the fixing screws and drive specified? The head uses a Torx T15 drive and a M3.5x8.5 fixing screw for clamp retention and serviceability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust cutting capacity with targeted cooling to maintain steady throughput: the combination of a 42 mm diameter head and through-coolant feed ensures consistent machining performance and longer insert life. Order the cutter directly via Metav Werkzeuge or consult our specialists for precise tool matching. Screw-in milling cutter VT130-1TM — 42 mm, internal coolant (Teknik Makina) A screw-in milling cutter designed for RDMT 12T3 indexable inserts, intended for efficient face and shoulder milling in industrial production environments. 42 mm diameter for robust material removal Internal coolant channel for improved cooling Four cutting edges for efficient chip evacuation M16 screw-in connection, compatible with RDMT 12T3 Sustained removal rates through stable geometry The screw-in holder features a 42 mm diameter head and four cutting edges, giving a stable cutting geometry that reduces vibration and promotes uniform wear. For production runs this stability translates into shorter cycle times and fewer tool changes, since consistent contact conditions help preserve insert life. The holder’s design balances rigidity with accessibility, so indexed inserts seat securely while maintaining the cutting clearance needed for efficient face and shoulder machining. Coolant-through design that extends service intervals By integrating an internal coolant channel, the tool feeds coolant directly to the cutting zone, which helps to dissipate heat, support chip control and reduce built-up edge on the insert. This targeted cooling is especially beneficial when working at higher cutting speeds or when repetitive passes increase thermal load. For machinists unfamiliar with coolant-through tools: delivering coolant internally means the liquid reaches the insert flank rather than just the external tool body, improving lubrication and prolonging the effective life of the insert. Secure mounting and straightforward insert handling The cutter uses an M16 thread with a thread height of 24.5 mm, providing reliable axial and radial clamping in compatible toolholders. Indexable inserts for the system are RDMT 12T3, allowing fast replacement without regrinding; the insert is clamped with a Torx screw (M3.5x8.5) that is tightened using a T15 Torx key, so maintenance and exchange are reproducible and simple. The compact overall length of 60 mm and a low mass of 0.237 kg reduce centrifugal loads and make the assembly suitable for a range of spindle setups. Designed for operational efficiency and predictable production Viewed as a component of a larger tooling strategy, this screw-in cutter supports predictable production cycles: consistent insert seating, coolant-through performance and a proven insert geometry all contribute to fewer unscheduled stops. The configuration is particularly useful where quick insert swaps and minimal set-up times are required. Combined with routine checks of clamping torque and coolant flow, the holder helps maintain stable part quality across batches. For procurement or technical matching of the Teknik Makina screw-in milling cutter with internal coolant, contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical Data Article number: VT130-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Label: 42mm screw-in milling cutter RDMT 12T3 L60mm with internal coolant ECLASS: 21180806 Facts Diameter: 42 mm Overall length: 60 mm Thread: M16 Thread height: 24.5 mm Cutting edges: 4 Cutting-edge height: 35.5 mm Weight: 0.237 kg Special features Compatible inserts: RDMT 12T3 Internal coolant: yes Torx key: T15 Torx screw: M3.5x8.5 SKU: VT130-1TM UID: VT130-1TM FAQ Which indexable inserts fit this holder? The cutter accepts RDMT 12T3 indexable inserts; the interface and seat geometry are matched to that insert family for correct positioning and reliable clamping. Is there internal coolant and how is it supplied? Yes, the tool has an internal coolant channel; coolant is supplied via the machine’s toolholder coolant feed to reach the cutting zone directly. What fastening is required to secure the holder? The holder uses an M16 thread for screw-in mounting and the insert is secured with a Torx screw (M3.5x8.5) tightened with a T15 key. How many cutting edges does the tool have and what is the cutting-edge height? The specification shows four cutting edges with a cutting-edge height of 35.5 mm, providing multiple effective edges for indexation. What is the part number for ordering and which brand produces it? This item is sold as VT130-1TM and is manufactured by Teknik Makina Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust, compact milling solution that combines a 42 mm cutting diameter with internal coolant for stable chip control and extended tool life; request the VT276TM via Metav Werkzeuge or consult our specialists for application advice. VT276TM screw-in milling cutter — 42 mm diameter with internal coolant The VT276TM screw-in milling cutter designed for 3PKT 1004 indexable inserts offers a compact, coolant-fed solution for reliable pocket and slot milling in workshop and production settings. 42 mm diameter for stable milling Internal coolant for improved chip evacuation Six cutting edges for higher productivity Compatible with 3PKT 1004 Taegutec inserts Increased material removal with a compact design The screw-in milling cutter delivers high material removal rates while remaining compact on the arbor. A 42 mm cutting diameter combined with six cutting edges reduces cycle times and spreads wear across multiple edges, which prolongs service intervals. The robust thread interface and a 25 mm thread height ensure secure clamping and repeatable concentricity, making the tool suitable where reliable runout and repeatability are required in series production. Improved process reliability thanks to internal coolant Built-in internal coolant channels direct coolant to the cutting zone, improving chip evacuation and heat control. Better coolant flow reduces margin for built-up edge and thermal distortion, which translates to more consistent surface finish and longer insert life. For workshops moving from external coolant setups, this integrated delivery reduces complexity at the spindle and enhances machining stability without additional fixtures. Straightforward handling and maintenance to keep production running Tool change and maintenance are kept simple with a Torx retention screw (M2.5x7) and a matching T8 key for secure insert clamping. The screw-in head concept minimises inventory by allowing quick replacement of the cutting head while the compact 68 mm overall length maintains accessibility in tight set-ups. Compatibility with Taegutec 3PKT 1004 indexable inserts ensures a broad choice of grades and geometries for different workpiece materials and finishing requirements. Request the Teknik Cutting Tools VT276TM from Metav Werkzeuge for dependable supply and tailored technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VT276TM Label: 42mm Einschraubfräser 3PKT 1004 L68mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 42 mm Overall length: 68 mm Thread: 16 Thread height: 25 mm Cutting-edge height: 43 mm Number of cutting edges: 6 Weight: 0.346 kg Special features Internal coolant Compatible with 3PKT 1004 indexable inserts Suitable for Taegutec inserts Torx key size T8 Torx screw: M2.5x7 FAQ Which indexable inserts fit this cutter? The VT276TM screw-in milling cutter accepts 3PKT 1004 indexable inserts and is specified as compatible with Taegutec insert types. Does the tool provide internal coolant? Yes, the cutter features internal coolant channels to improve chip evacuation and thermal control during machining. What are the cutter's main dimensions? Key dimensions: 42 mm diameter, 68 mm overall length, 43 mm cutting-edge height and 25 mm thread height. How many cutting edges does the head have? The milling head incorporates six cutting edges to distribute wear and increase productivity. Which screw and key are required for insert clamping? Insert clamping uses a Torx screw M2.5x7 and a T8 Torx key for secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a sturdy M16 screw-in connection, integrated internal coolant and a compact 42 mm diameter for efficient, reliable milling; order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. Screw-in milling cutter for BLMP 0603 indexable inserts — 42 mm, internal coolant (Teknik Makina) The screw-in milling cutter for BLMP 0603 indexable inserts is a compact, coolant-fed cutter designed for secure M16 mounting in CNC and milling applications, offering a balance of rigidity and accessibility for semi-finishing and face milling tasks. 42 mm diameter for efficient stock removal Internal coolant for extended tool life M16 screw-in thread for secure mounting Compatible with BLMP 0603 Taegutec inserts Rapid, measurable removal rates with a compact profile This cutter delivers predictable cutting performance thanks to its 42 mm diameter and six cutting edges, which together enable steady material removal without excessive overhang. The combination of a short overall length and a robust M16 thread reduces vibration and improves surface finish, translating into lower rework rates and shorter cycle times. For buyers seeking reproducible throughput on small to mid-sized components, the design supports efficient planning and machine utilisation while keeping fixture changes straightforward. Coolant-fed design that prolongs service intervals The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, reducing temperatures and flushing chips away from the inserts. This controlled cooling lowers thermal wear on the cutting edges and helps maintain cutting geometry for longer, meaning fewer tool changes per production run and improved consistency across batches. For operations where uptime and maintenance predictability matter, the coolant-assisted configuration contributes directly to reduced running costs and steadier process capability. Secure mounting and simple maintenance for workshop workflows A secure M16 screw-in connection and standard Torx fastening simplify installation and routine service: the tool uses an M3x6.2 Torx screw (Torx key T8) for insert clamping, facilitating quick insert changes and reducing non-productive time. Compatibility with Taegutec BLMP 0603 indexable inserts ensures broad availability of grades and geometries for different materials and cutting conditions. The cutter’s compact form and proven fastenings support a dependable, repeatable assembly process on multi-spindle and single-spindle milling machines. Contact Metav Werkzeuge GmbH in Emmerich for tailored technical advice on the M16 screw-in milling cutter with internal coolant and to arrange a precise delivery or specification check: info@metav-werkzeuge.com · +49 2822 7131930 Technical data SKU: VT196-1TM Type: Screw-in milling cutter Manufacturer: Teknik Makina Label: 42mm screw-in milling cutter BLMP 0603 L68mm with internal coolant Facts Diameter: 42 mm Overall length: 68 mm Thread height: 25 mm Thread: M16 Cutting edges: 6 Cutting-edge height: 43 mm Weight: 0.313 kg Special features Internal coolant Compatible with BLMP 0603 indexable inserts Inserts manufacturer compatibility: Taegutec Torx key: T8 Torx screw: M3x6.2 FAQ Which indexable inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; compatibility has been verified for Taegutec insert variants and grades. Is the tool supplied with coolant capability? Yes, this screw-in milling cutter is equipped with internal coolant to direct fluid to the cutting zone for improved tool life. What fastening system is used for insert clamping? Insert clamping uses a Torx screw M3x6.2 tightened with a T8 Torx key for straightforward insert replacement. What is the mounting interface on the cutter? The tool uses an M16 screw-in thread and a 25 mm thread height for secure mounting in compatible holders. Can this cutter be used for fine finishing operations? With its six cutting edges and compact geometry, the cutter is suitable for semi-finishing and some finishing passes depending on insert grade and machine setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a robust indexable drill body, a substantial Ø 42 mm cutting diameter and a 126 mm cutting length for reliable, high-throughput machining; order directly via Metav Werkzeuge or consult our specialists for application support. U188TM indexable drill body — 42 mm diameter, 126 mm cutting length (Teknik Makina) The U188TM indexable drill body is engineered for production drilling where repeatability and quick insert changes are essential, suitable for CNC machining environments using Korloy WCM‑06T3 inserts *Indexable drill body for insert WCM-06T3 *Ø 42 mm effective diameter *126 mm cutting length for deep holes *32 mm shank with 235 mm overall length Stable heavy-duty cutting for consistent cycle times The design focuses on delivering stable cutting performance in repetitive drilling operations. With an effective diameter of 42 mm and a cutting length of 126 mm, the tool enables deeper holes without compromising rigidity. The solid construction reduces vibration, which in turn helps to maintain hole geometry and surface quality over long production runs. This stability translates into predictable cycle times and fewer rejected parts, supporting efficient workflow in a production setting. Quick insert changes for lower downtime and cost control Compatibility with WCM‑06T3 indexable inserts from Korloy shortens maintenance intervals and lowers tooling costs. The insert system allows rapid replacement of cutting edges without the need to regrind or replace the whole tool, keeping machines productive. For purchasers, this means a favourable cost‑per‑hole calculation: worn edges are swapped out quickly, minimising machine idle time and simplifying tool inventory management in the workshop. Secure clamping and workshop integration A 32 mm shank and an overall length of 235 mm provide a robust interface for most toolholders and adaptors used in machining centres. The drill body includes a 58 mm head receptacle (for the cutting assembly), which helps ensure correct seating and repeatable positioning of the inserts. The unit’s mass (approx. 1.646 kg) contributes to dampening during cutting, improving concentricity and supporting consistent results across batches. Application guidance and suitability for production use This indexable tool is intended for industrial drilling tasks in production environments where insert systems are preferred for their economy and speed of service. The geometry and cut length suit standard deep‑drilling operations on workpieces where an indexable solution is chosen to balance performance and running costs. For integration into an existing tool pool, the compatibility with Korloy inserts simplifies procurement and matching with commonly used grades and geometries. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina U188TM indexable drill body into production and to secure reliable supply from our European distribution hub in Emmerich. Technical data Article number: U188TM Manufacturer: Teknik Makina Facts Diameter: 42 mm Cutting length: 126 mm Shank diameter: 32 mm Overall length: 235 mm Weight: 1.646 kg Special features Compatible inserts: WCM-06T3 Insert manufacturer compatibility: Korloy Cutting head length: 58 mm SKU: U188TM FAQ What insert type does this drill body use? The U188TM drill body is designed for WCM‑06T3 indexable inserts, allowing quick replacement of cutting edges. Which insert manufacturers are compatible? Compatibility is confirmed for Korloy inserts with the specified WCM‑06T3 geometry for reliable fit and performance. Is the shank size suitable for standard toolholders? Yes, the component has a 32 mm shank, which matches common toolholders used in machining centres and reduces the need for special adaptors. What is the maximum cutting length available on the tool? The tool provides a 126 mm cutting length, enabling productive deep‑hole drilling without compromising stability. How does the U188TM reduce downtime in production? By using indexable inserts, the U188TM allows rapid edge replacement rather than full tool replacement or regrinding, cutting maintenance time and lowering operating costs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Optimise parting and grooving operations with the robust 32 mm shank and 50 mm cutting height for stable cuts and consistent insert life; the precise 4 mm cutting width enables narrow slotting where repeatability matters. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. Stechklemmhalter — parting and grooving toolholder, 32 mm shank, 50 mm cutting height (Teknik Makina) The Stechklemmhalter is a parting and grooving toolholder engineered for medium-duty turning and slotting tasks, compatible with 4C indexable inserts and designed for reliable performance in workshop and production environments. Accepts 4C indexable inserts 32 mm shank diameter for high rigidity 50 mm cutting height for deeper grooves 4 mm cutting width for narrow slotting Stable clamping for consistent cycle times The holder’s 32 mm shank and robust geometry are designed to reduce vibration, so cutting conditions are stabilised and insert life is extended. Integrated clamping details, specified as 4C-R S224, ensure that 4C indexable inserts are secured with repeatable positioning, which leads to fewer re-clamps and less downtime. For machinists focused on predictable output, the combination of shaft rigidity and an accurately defined cutting height contributes directly to improved surface finish and reduced scrap rates. Easy integration with standard turning setups With the S32S shank designation and an overall length of 250 mm, the toolholder is intended for seamless installation in common tool posts and turret systems. The compact head diameter (Ø 42 mm) and a net weight of 1.672 kg strike a balance between mass for damping and a form factor that fits tight tooling envelopes. Provided dimensions and designations allow engineers to verify compatibility quickly; where spindle clearance or overhang are constrained, the listed measures support confident process planning. Practical benefits for production and maintenance The 4 mm cutting width and 50 mm cutting height allow controlled material removal when producing narrow slots or parting off small-diameter workpieces. Because the system uses standard 4C inserts, replacement tooling and inventory management are simplified and cost-effective. Routine maintenance is straightforward: insert changes follow established indexable-insert procedures, and the clamping designation facilitates finding matching spare parts. For facilities seeking a reliable, easily serviced solution, this holder offers a pragmatic mix of performance and maintainability. For precise parting and grooving needs, contact Metav Werkzeuge to request application advice or to procure Teknik Cutting Tools’ parting and grooving solution K656TM; reach our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K656TM Designation: Stechklemmhalter Manufacturer: Teknik Makina Weight: 1.672 kg Overall length: 250 mm Facts Shank diameter: 32 mm Head diameter: 42 mm Cutting height: 50 mm Cutting width: 4 mm Compatible inserts: 4C Special features Shank designation: S32S Clamping designation: 4C-R S224 Accepts 4C indexable inserts FAQ What inserts does the parting and grooving toolholder use? The toolholder accepts 4C indexable inserts, allowing straightforward replacement and established stocking practices for common insert geometries. Is the holder suitable for heavy overhangs in small lathes? The K656TM is designed with a 32 mm shank and a 250 mm overall length; mounting with minimal overhang is recommended to preserve rigidity and do not compromise finish. How does the shank designation affect compatibility? The S32S shank designation identifies the nominal shank interface and helps confirm the holder will fit standard tool posts and turret bores matching that specification. What typical applications suit this clamping holder? The holder is intended for parting and narrow grooving tasks in turning operations where a 4 mm cutting width and repeatable positioning are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of stable clamping, compatibility with 4C indexable inserts and robust dimensions for consistent grooving results; order via Metav Werkzeuge or consult our specialists for application support. Grooving clamp holder K632TM — 32 mm shank, for 4C indexable inserts (Teknik Makina) The Grooving clamp holder K632TM is designed for precision grooving and turning operations on CNC lathes, compatible with 4C indexable inserts and optimised for stable, vibration‑reduced cutting. 32 mm shank for stable clamping Compatible with 4C indexable inserts 4 mm maximum cutting width 50 mm cutting height, 250 mm overall length Consistent clamp stability for repeatable grooves The K632TM combines a 32 mm shank with a compact, rigid body to deliver consistent clamping in serial production and single‑piece machining. The solid shank diameter contributes to reduced chatter, which is beneficial for surface finish and can extend insert life through lower vibration and heat generation. Where tight tolerances are required, the design enables reliable repeatability so that setup times are shortened and process variability is minimised. The shank designation S32S confirms compatibility with common tool posts and holders used on industrial lathes. Precision grooving with industry-standard inserts Configured for 4C indexable inserts, the holder accepts the established 4C insert geometry to simplify insert sourcing and changeover. The clamping bar designation 4C‑R S229 provides a clear reference for selecting compatible inserts and spare clamping components. With a 4 mm cutting width and a 50 mm cutting height, the tool is suited to narrow grooving and parting tasks where controlled chip formation and secure insert seating are required. The clamping mechanism is designed so that insert replacement is straightforward, helping to reduce machine downtime during routine maintenance. Robust dimensions built for workshop reliability With a 250 mm overall length and an outer diameter of 42 mm, this grooving holder balances reach with torsional stiffness, making it suitable for a wide range of turning setups. The holder’s mass of 1.656 kg contributes to damping of cutting forces while remaining manageable for tool changes and fixture handling. These dimensions make the component appropriate for medium‑to‑heavy turning operations in general workshop and production environments, where a dependable toolholder supports consistent cycle times and predictable quality. Practical application guidance and workshop benefits Designed for use in CNC lathe grooving and parting operations, the holder is particularly appropriate where indexable inserts are preferred for cost‑efficient production. When mounted correctly and paired with suitable inserts, the holder supports precise groove profiles and repeatable part geometry. For further technical clarification — such as recommended insert grades for specific workpiece materials or optimal clamping torque — Metav Werkzeuge’s technical team can provide guidance based on shop practice and material demands. Metav’s role as a quality filter in Emmerich ensures reliable supply and documentation that supports integration into production processes. For application advice or to request the Teknik Cutting Tools grooving clamp holder K632TM for a specific machining setup, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss delivery, compatibility and next‑step recommendations. Technical Data SKU: K632TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting height: 50 mm Cutting width: 4 mm Weight: 1.656 kg Diameter: 42 mm Overall length: 250 mm Special features Compatible with 4C indexable inserts Shank designation: S32S Clamping bar designation: 4C‑R S229 Suitable for precision grooving and parting FAQ What insert type does the holder accept? The holder is compatible with 4C indexable inserts; reference clamping bar designation 4C‑R S229 for matched components. Which shank diameter is specified for this tool holder? The tool holder features a 32 mm shank (S32S) for stable mounting in standard tool posts. What are the primary dimensions relevant to setup? Relevant dimensions are 4 mm cutting width, 50 mm cutting height, 250 mm overall length and 42 mm outer diameter. Is the grooving holder suitable for heavy‑duty turning? The combination of mass (1.656 kg) and robust shank provides good rigidity for medium to heavy turning and grooving tasks when used within machine and insert limits. How does this holder help with production consistency? The robust shank and secure clamping reduce vibration and improve repeatability, which supports consistent groove geometry and longer insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 42 mm cutting diameter, a secure 16 mm shank and compatibility with SCMT 09T3 indexable inserts for efficient, repeatable T-slot machining; order via Metav Werkzeuge or consult our specialists for application-specific advice. T-slot cutter TKC196TM — 42 mm diameter, L200 mm (Teknik Makina) T-slot cutter TKC196TM is a precision milling tool designed to machine T-slots using SCMT 09T3 indexable inserts, ideal for fixture and slot production in workshop and industrial environments. 42 mm cutting diameter for wide T-slots Compatible with SCMT 09T3 indexable inserts 16 mm shank for secure clamping Three cutting edges for balanced machining Consistent accuracy with modular inserts The combination of a 42 mm cutting head and acceptance of SCMT 09T3 indexable inserts delivers a modular approach to slot machining. Using indexable inserts means cutting geometry can be renewed without replacing the whole tool, which reduces tooling costs and speeds up turnaround. The cutter’s design keeps cutting forces predictable, so the milling process remains stable and repeatable even during batch production, supporting consistent component fit and reduced rework. Stable performance that improves cycle time and surface quality Equipped with three cutting edges and a 55° cutting angle, the tool balances material removal and chip formation to lower vibration and improve surface finish. The 16 mm shank and 200 mm overall length provide a secure clamping interface and reach for most common T-slot depths, while the 35 mm effective cutting length gives a defined engagement zone that helps control tool deflection. These attributes contribute to faster cycle times and fewer secondary operations, enhancing overall efficiency on the shop floor. Quick servicing and reliable workshop integration Insert changes are straightforward thanks to the Torx fastener system (Torx T15; screw M3.5x8.5), enabling fast indexable-insert swaps and minimal downtime. With a compact mass of 0.442 kg and robust construction, the cutter integrates easily into standard toolholding systems and is suited for repetitive use in production and maintenance tasks. Clear labelling and the SKU TKC196TM simplify inventory control and procurement within established tooling programmes. For tailored machining advice or to secure the Teknik Makina T-slot cutter from stock at Metav Werkzeuge — dispatched from our Emmerich warehouse — contact Metav Werkzeuge for specification support or ordering by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data SKU: TKC196TM Product: T-slot cutter for SCMT 09T3 indexable inserts Label: 42mm T-Nut Fräser SCMT 09T3 L200mm Manufacturer: Teknik Makina Core data Diameter: 42 mm Overall length: 200 mm Shank diameter: 16 mm Cutting length (shank/slice): 35 mm Cutting edges: 3 Cutting angle: 55° Weight: 0.442 kg Torx key: T15 Torx screw: M3.5x8.5 Special features For SCMT 09T3 indexable inserts SKU TKC196TM Three cutting edges for balanced cutting 55° rake/approach geometry FAQ Which indexable inserts fit this cutter? The cutter accepts SCMT 09T3 indexable inserts; the modular insert system allows quick replacement to restore cutting geometry without changing the tool body. What shank size is required for secure clamping? A 16 mm shank is specified for the tool, providing a stable interface for conventional toolholders and minimizing runout during T-slot machining with the TKC196TM cutter. How many cutting edges does the tool have and what is the angle? The tool features three cutting edges set at a 55° cutting angle, which helps balance chip evacuation and surface finish during slot production. Is the cutter suitable for repetitive production work? Yes; the indexable insert concept, Torx fastener access and a robust shank design make the TKC196TM suitable for repetitive and batch production where quick servicing and repeatable results are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 42 mm cutting diameter, compatibility with SCMT 09T3 indexable inserts and a robust Ø 20 mm shank for stable, repeatable T-slot production; order directly via Metav Werkzeuge or consult our specialists for integration support. T-slot cutter for SCMT 09T3 indexable inserts, 42 mm – Teknik Makina A T-slot cutter engineered for precise T-slot milling in workshop and production environments, compatible with SCMT 09T3 indexable inserts and designed for stable clamping. *42 mm cutting diameter *Compatible with SCMT 09T3 inserts *Ø 20 mm shank for secure clamping *Three cutting edges, 55° cutting angle Accurate T-slot forming for consistent production The cutter delivers repeatable results thanks to a 42 mm cutting diameter and an optimised geometry that reduces chatter during engagement. The combination of a defined radial dimension and a 55° cutting angle ensures consistent chip evacuation and a clean slot profile, which lowers rework rates and improves throughput. This configuration is particularly effective in small- to medium-batch production where dimensional consistency of T-slots is critical. Stable holding and tool life benefits from a solid shank A Ø 20 mm shank and a 100 mm overall length provide secure clamping in standard toolholders, improving rigidity during side-cutting operations and reducing the risk of run-out. The three cutting edges distribute cutting forces evenly, which extends abrasive and fracture resistance in the insert system and reduces downtime for tool changes. The tool’s modest mass (approx. 0.242 kg) assists acceleration on shorter cycles while maintaining industrial robustness. Simple insert system and fast on-tool maintenance Designed for indexable insert use, the cutter accepts SCMT 09T3 inserts fixed with a M3.5x8.5 torx screw and tightened using a T15 torx key, enabling quick replacement and minimal spindle idle time. The standardised insert interface supports widespread insert availability and cost-effective stocking. The assembly and service routine is straightforward, helping maintenance teams to restore cutting capacity rapidly without specialist equipment. For reliable T-slot milling backed by Teknik Cutting Tools quality, contact Metav Werkzeuge in Emmerich for tailored supply and practical advice: info@metav-werkzeuge.com • +49 2822 7131930. Technical data Article number: TKC193TM Label: 42mm T-Nut Fräser SCMT 09T3 L100mm Brand: Teknik Makina eClass: 21180605 Facts Cutting diameter: 42 mm Overall length: 100 mm Weight: 0.242 kg Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 3 Cutting angle: 55° Special features Compatible with SCMT 09T3 indexable inserts Screw type: M3.5x8.5 Torx key: T15 SKU: TKC193TM Product type: T-slot cutter FAQ What insert type does this cutter use? The cutter is designed for SCMT 09T3 indexable inserts, offering a standardised insert interface for straightforward sourcing and replacement. Is the shank suitable for rigid toolholders in production use? Yes, the Ø 20 mm shank and 100 mm overall length provide the rigidity required for stable T-slot milling in workshop and light industrial settings. How many cutting edges are fitted and what is the benefit? The tool has three cutting edges, which balance cutting forces, improve surface finish and extend the effective life of each insert. Which fastening hardware is required for the inserts? Inserts are secured with a M3.5x8.5 torx screw tightened with a T15 torx key, enabling quick and secure insert changes. What is the SKU for ordering or spare-part reference? The product is listed under TKC193TM for ordering and stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, serviceable design that combines a secure M16 screw-in connection with a 42 mm cutting head and four cutting edges for consistent material removal; order the VT130TM via Metav Werkzeuge or contact their consultants for tailored advice. Screw-in milling cutter VT130TM – Threaded arbor for RDMT 12T3, Ø42 mm (Teknik Makina) The screw-in milling cutter VT130TM is a threaded arbor designed for indexable RDMT 12T3 inserts, providing a compact solution for reliable insert clamping and short changeover times in light to medium machining tasks. M16 threaded arbor, 42 mm diameter Compatible with RDMT/DMT 12T3 inserts Four cutting edges for balanced wear Torx T15 screws and M3.5 locking screw Faster changeovers through standardised clamping The VT130TM uses an M16 screw-in connection and a Ø42 mm head to combine secure mounting with a compact footprint. This geometry reduces overhang and helps maintain tool rigidity, which translates directly into more predictable cutting results. The threaded design accepts RDMT style indexable inserts, allowing quick insert swaps; the included Torx fixing hardware (M3.5x8.5 fasteners with T15 key) ensures repeatable clamping without special tools. The result is a measurable reduction in downtime during cutter servicing. Predictable cutting capacity with clear specifications With a cutting height of 35.5 mm and four cutting edges, the arbor distributes wear across multiple cutting corners, extending the life cycle of each insert and smoothing machining forces. The specified thread height of 24.5 mm supports secure engagement in threaded toolholders, while the overall length of 60 mm keeps the assembly compact for operations where space is limited. These defined values enable straightforward process planning and facilitate integration into existing tool sets. Serviceability and workshop convenience built in Weighing just 0.237 kg, the VT130TM is easy to handle when changing inserts or performing inspections. The unit is supplied with standardised Torx screws (M3.5) and a T15 key size, simplifying spare-part stock and on-site maintenance routines. Compatibility with RDMT 12T3 indexable inserts means well-known insert geometries and grades can be selected according to the material and finishing requirement, which keeps procurement simple and repeatable. Contact Metav Werkzeuge GmbH in Emmerich for product guidance, availability information and to arrange a tailored order for the Teknik Makina VT130TM: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VT130TM Manufacturer: Teknik Makina Product name: Screw-in milling cutter VT130TM Application: for RDMT 12T3 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Numbers Diameter: 42 mm Thread: M16 Number of cutting edges: 4 Overall length: 60 mm Thread height: 24.5 mm Cutting height: 35.5 mm Weight: 0.237 kg Torx screw: M3.5x8.5 Locking screw: M3.5 Torx key: T15 Special features Compatible with RDMT/DMT 12T3 indexable inserts Screw-in arbor design Standard Torx clamping hardware Compact, serviceable format FAQ What type of inserts does this arbor accept? The VT130TM accepts RDMT 12T3 indexable inserts (also noted as DMT 12T3 in the product data) and is intended for those standard insert geometries. Which thread and diameter are specified for mounting? Mounting is via an M16 screw-in connection and a 42 mm cutter head diameter, as supplied on the VT130TM from Teknik Makina. How many cutting edges are provided and what is the cutting height? The arbor features four cutting edges and a cutting height of 35.5 mm on the VT130TM. What fastening hardware is used for the inserts? Insert clamping uses M3.5 screws (M3.5x8.5 for the Torx screw) and a Torx T15 key for tightening on the VT130TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, purpose-built turning head that combines a 90° cutting angle with a slim 16 mm shank for reliable shoulder cuts and reduced setup time; order directly via Metav Werkzeuge or ask our consultants for help with integration and rapid supply from Emmerich. Corner tool head T114TM – for TPKN 1603-2204 indexable inserts, 90° cutting angle (Teknik Makina) The Corner tool head T114TM is a compact turning head designed for use with TPKN 1603-2204 indexable inserts, providing a true 90° cutting angle for precise shoulder and face turning tasks. Compact 16 mm shank for small housings Precise 90° cutting angle for shoulder cuts Compatible with TPKN 1603 indexable inserts Lightweight 0.28 kg for reduced tool load Accurate shoulder turning with a fixed 90° geometry The compact turning head delivers a defined 90° cutting angle, which ensures repeatable shoulder faces and perpendicular contours. A fixed-angle geometry reduces alignment work and simplifies programming for CNC and manual setups alike. The tool head is engineered to accept standard indexable plates, so production runs benefit from predictable tool life and consistent surface finish. The combination of geometric stability and straightforward mechanics supports higher first-pass accuracy and fewer reworks. Fast, secure insert clamping and maintenance Clamping is accomplished with an M6x17 clamping screw and a corresponding 4 mm Allen key, providing a secure hold for the insert and minimising vibration during cutting. The straightforward screw clamping system allows quick index and replacement of inserts, reducing downtime. Because replacement is mechanical rather than hydraulic or screwless, maintenance procedures remain simple and easily documented in workshop routines, enabling efficient shift handovers and clear toolroom practices. Compact dimensions that ease integration With a 42 mm diameter, an overall length of 44 mm and a 16 mm shank, this head is designed for installations where tool overhang and clearance are limited. The modest mass of 0.28 kg lowers inertia on the turret and helps to keep dynamic loads down during rapid traverses. The small footprint supports closer nestings of tools on multi-station turrets and is particularly useful where space, rigidity and repeatability must be balanced. Compatibility and practical application The holder is specified for TPKN 1603 indexable inserts and is supplied to accept standard insert geometries used for shoulders and light profiling. The three-edge seating supports indexable rotation and makes economical use of each insert. The tool head is suitable for production, small-batch and prototyping environments where reliable clamping, compact form and repeatable results are required; it supports quick changeovers without complex adapters or bespoke mounts. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s corner tool head T114TM and secure supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T114TM Manufacturer: Teknik Makina Description: for TPKN 1603-2204 Indexable Inserts Weight: 0.28 kg Facts Diameter: 42 mm Overall length: 44 mm Shank diameter: 16 mm Cutting angle: 90° Number of cutting edges: 3 Special features Compatible with TPKN 1603 indexable inserts Clamping screw: M6x17 Allen key size: 4 mm Fixed-angle corner turning head FAQ What insert type fits this turning head? The turning head is designed for TPKN 1603 indexable inserts; it also lists compatibility with the TPKN 1603-2204 family for common insert formats. Which shank diameter is required for mounting? Mounting requires a toolholder or arbor that accepts a 16 mm shank diameter; the compact shank is intended for close-packed turret stations. How is the insert secured in the head? An M6x17 clamping screw secures the insert, tightened with a 4 mm Allen key, providing a secure mechanical clamp for stable cutting. Is the cutting angle adjustable? The tool head provides a fixed 90° cutting angle for repeatable shoulder and face turning; the geometry is chosen for perpendicular cuts rather than adjustable angling. What are the key dimensions to check for turret clearance? Relevant dimensions are 42 mm diameter and 44 mm overall length; the low mass of 0.28 kg also helps reduce dynamic loading on the turret. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precise chamfering solution with a 43 mm cutting diameter, a 25 mm shank for rigid mounting and compatibility with economical TCMT 16T3 indexable inserts — a combination that keeps tooling costs low while improving process repeatability; order directly via Metav Werkzeuge or consult their specialists for integration advice. Chamfer cutter S340TM — 43 mm diameter, TCMT 16T3 compatible (Teknik Makina) The Chamfer cutter S340TM is a compact, indexable-insert tool designed for producing clean 45° and 90° chamfers in machining setups where repeatability and quick insert changes are required. 43 mm cutting diameter Compatible with TCMT 16T3 inserts 45° and 90° chamfer angles 25 mm shank for secure clamping Consistent chamfers that reduce rework and setup time The S340TM delivers repeatable chamfer geometry thanks to a well-dimensioned cutting head and defined seating for indexable inserts. Using replaceable TCMT 16T3 inserts means the cutting edge can be renewed in seconds, lowering downtime compared with solid cutters. The tool’s 3 cutting edges and dedicated clamping ensure stable cutting conditions, reducing the likelihood of rework and the time spent on manual deburring. For shops aiming to standardise edge treatments, this cutter offers a predictable, measurable result for both 45° and 90° chamfers. Rigid build for industrial use and reliable toolholding Designed with a 25 mm shank and a 100 mm overall length, the tool provides a balance of reach and stiffness suited to many common holders and collet systems that accept 25 mm shanks. The moderate weight (0.634 kg) and compact design contribute to lower vibration during chamfering passes, which supports longer insert life and a cleaner surface finish. Fast and secure insert fastening is provided by the M3.5x8.5 Torx screw with a T15 key, giving straightforward maintenance and minimal accessory complexity for production environments. Economical operation through indexable inserts and controlled chip management By accepting standard TCMT 16T3 inserts, the cutter minimises tooling costs and simplifies inventory: only the small triangular inserts need replacing rather than entire cutters. The 37 mm cutting height and the cutter’s diameter are dimensioned to produce stable chip evacuation for typical chamfering depths, supporting efficient cycle times and consistent part quality. Compatibility with two common chamfer angles (45° and 90°) makes the cutter versatile across a range of finishing tasks without multiple dedicated tools. Contact Metav Werkzeuge to discuss integrating the Teknik Makina Chamfer cutter S340TM into the tooling portfolio or to request tailored advice from their technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S340TM Brand: Teknik Makina SKU: S340TM Facts Cutting diameter: 43 mm Shank diameter: 25 mm Cutting height: 37 mm Overall length: 100 mm Weight: 0.634 kg Cutting edges: 3 Chamfer angles: 45° / 90° Special features For indexable inserts TCMT 16T3 Torx screw M3.5x8.5 Torx key size T15 Designed for chamfering operations FAQ What insert type does the chamfer cutter require? The chamfer cutter S340TM is designed for TCMT 16T3 indexable inserts, offering quick replacement and economical running costs. Which chamfer angles can be produced with this cutter? The tool is configured to produce defined 45° and 90° chamfers, enabling consistent edge geometry without additional tool changes. What are the key dimensions for toolholding compatibility? The cutter has a 25 mm shank and 100 mm overall length, suitable for holders and collets that accept a 25 mm diameter shaft. How many cutting edges are available on the head? The cutter features 3 cutting edges, arranged to provide stable cutting and straightforward rotation of insert positions as required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise hole-making, robust mounting and proven indexable-insert compatibility for efficient production cycles; order the drill body directly via Metav Werkzeuge or consult our specialists for batch planning and technical advice. Drill body U190TM – indexable-insert compatible, Ø 43 mm | Teknik Makina The Drill body U190TM is an indexable-insert drill body designed for machining tasks requiring a 43 mm nominal diameter and an extended cutting reach of 129 mm, suitable for workshops and production lines seeking repeatable hole-making performance Ø 43 mm nominal diameter Cutting length 129 mm for deeper holes Compatible with WCM-06T3 indexable inserts Shank Ø 32 mm, mounting length 58 mm Precise machining performance for consistent hole quality This drill body delivers repeatable hole geometry by combining a stable body design with a long effective cutting length. The cutting length 129 mm and total length 239 mm enable operations that go beyond standard through-hole depths while maintaining concentricity. In practice, the solid construction reduces runout and vibration, which in turn improves hole tolerance and surface finish. The result is fewer reworks and a steadier production output when pairing the tool with appropriately specified indexable inserts. Secure mounting and proven insert compatibility Engineered for reliable clamping, the tool features a shank Ø 32 mm and a mounting length 58 mm, providing a robust connection to the toolholder and minimising movement under cut. The body is supplied for use with WCM-06T3 indexable inserts and is confirmed compatible with inserts from Korloy, enabling straightforward reconditioning on the insert level rather than replacing the whole tool. This approach shortens downtime and simplifies tool inventory management in workshop environments. Productivity gains through practical design By combining an extended cutting reach with a compact mounting footprint, the drill body supports efficient cycle times and predictable tool life. The relatively substantial mass (weight 1.726 kg) contributes to stability during machining, reducing chatter on medium-duty to heavy-duty passes. For production planners, this means improved process reliability and the ability to schedule longer uninterrupted runs, provided that cutting data and insert grades are adapted to the material being machined. Clear technical attributes to support procurement and setup All key dimensions and compatibility data are explicitly available for planning: Ø 43 mm diameter, cutting length 129 mm, total length 239 mm, and acceptance of WCM-06T3 inserts from Korloy. These measurable characteristics simplify fixture design, toolholder selection and CAM programming. For purchasing and stock control, the SKU U190TM and the manufacturer specification from Teknik Makina can be referenced directly in orders and tool lists to avoid ambiguity. For tailored supply quantities, technical coordination or to discuss integration of the Teknik Makina drill body into existing tool systems, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for precise support and next steps Technical data Article number: U190TM Manufacturer: Teknik Makina Product type: Drill body (indexable-insert compatible) Key dimensions Nominal diameter: 43 mm Cutting length: 129 mm Total length: 239 mm Shank diameter: 32 mm Shank/mounting length: 58 mm Weight: 1.726 kg Compatibility & features Compatible inserts: WCM-06T3 Recommended insert supplier: Korloy Brand: Teknik Makina FAQ Which inserts fit the drill body U190TM? The U190TM drill body is built for WCM-06T3 indexable inserts and is compatible with Korloy insert grades specified for that pocket geometry. What are the main dimensions of the U190TM drill body? Key dimensions include a nominal diameter of 43 mm, cutting length of 129 mm and a total length of 239 mm, which should be used for fixture and holder checks. What shank size is required for mounting? The tool requires a holder that accepts a shank diameter of 32 mm with a mounting length of 58 mm to ensure secure clamping and stable machining. Is the U190TM suitable for deeper hole drilling? With a cutting length of 129 mm and an overall length of 239 mm, the U190TM drill body is suitable for medium to deeper hole applications, provided the correct insert grade and cutting data are selected. What handling considerations apply given the tool mass? The U190TM has a weight of 1.726 kg; this contributes to machining stability but should be considered for tool-change procedures and holder balance to maintain optimal spindle performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com