Gibt es einen Hahn und Kolb Online Shop?

Compact, rigid and designed for repeatable grooving, the Teknik Makina parting and grooving clamp holder combines a 40 mm shank with a 50 mm cutting height to deliver stable, accurate operations; benefit from the secure clamping for 4C indexable inserts and order directly via Metav Werkzeuge or request application advice from our consultants. Parting and Grooving Clamp Holder — 40 mm shank, 50 mm cutting height (Teknik Makina) A parting and grooving clamp holder for secure clamping of 4C indexable inserts in turning and CNC grooving applications. Secure clamping for 4C indexable inserts 40 mm shank for heavy-duty stability 50 mm cutting height for deep grooves Compatible with S40T shank designation Maximised rigidity for repeatable cuts The holder is built to reduce vibration and maintain cutting stability: its 40 mm shank combined with a 300 mm overall length and a substantial mass (3.113 kg) creates a rigid tool assembly that improves surface finish and tool life. In practice, increased mass and the robust shank dimension lower deflection during parting and grooving, which leads to more consistent dimensional results. For CNC and manual lathes where groove accuracy is critical, this rigidity translates into fewer rework cycles and predictable cycle times. Fast, secure insert clamping with clear geometry Designed for 4C indexable inserts, the clamp arrangement identified as 4C-R S229 provides repeatable seating and easy replacement. The holder accepts a 4 mm cutting width and a 50 mm cutting height, making it suitable for medium-depth grooving tasks. The S40T shank designation indicates the recommended tool shank standard, simplifying integration into existing tool posts or turret stations. For users unfamiliar with insert systems: indexable inserts are replaceable cutting edges that locate precisely in a pocket; secure clamping ensures the insert remains seated under cutting forces and that positioning repeatability is maintained between changes. Workshop compatibility and operational benefits Integration is straightforward: the holder’s 49 mm diameter and standard shank interface make it compatible with common grooving fixtures and turrets, while the 4C insert family is widely available across suppliers. The result is a practical combination of accessibility and performance that supports both small-batch shops and production lines. Beyond compatibility, the configuration reduces set-up time; clearer insert indexing and a reliable clamp reduce downtime during tool changes, supporting steady production flow and lower overall operating costs. Where process optimisation is sought, this configuration offers a pragmatic path to improved throughput. For procurement or technical consultation regarding the Teknik Makina parting and grooving clamp holder (SKU K634TM), contact Metav Werkzeuge for tailored advice and order placement via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K634TM Name: Parting and grooving clamp holder Manufacturer: Teknik Makina Facts Shank diameter: 40 mm Cutting height: 50 mm Cutting width: 4 mm Overall length: 300 mm Diameter: 49 mm Weight: 3.113 kg Suitable for inserts: 4C Shank designation: S40T Clamp holder designation: 4C-R S229 Special features Compatibility with 4C indexable inserts Rigid clamping design Standard S40T shank interface Suitable for turning and CNC grooving operations FAQ What insert type fits this holder? The holder is configured for 4C indexable inserts; the clamp model is specified as 4C-R S229 to ensure correct seating and repeatability. Which shank standard is required? This tool uses an S40T shank designation and a 40 mm shank diameter, designed for turrets and tool posts that accept that standard. What are the key dimensions to check before fitting? Relevant dimensions are overall length 300 mm, diameter 49 mm, cutting height 50 mm and cutting width 4 mm; these determine clearance and depth capabilities. Is the holder suitable for production grooving operations? Yes, the holder’s rigidity (mass 3.113 kg and 40 mm shank) and standard insert compatibility make it suitable for repeatable production grooving and parting tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the holder’s combination of robust clamping and precise groove control — a 40 mm shank and 3 mm cutting width enable stable, repeatable grooving operations; the 50 mm cutting height and 300 mm overall length provide reach and engagement for longer workpieces. Order or request technical advice via Metav Werkzeuge for reliable delivery and application support. Stechklemmhalter — Grooving clamp holder with 40 mm shank and 3 mm cutting width (Teknik Makina) The Stechklemmhalter is a grooving clamp holder engineered for precision parting and narrow-groove turning, suitable for indexable 3C inserts and designed to deliver stable clamping and consistent chip control in shop-floor and production environments. Robust 40 mm shank for stable clamping 3 mm cutting width for narrow grooves 50 mm cutting height for deep engagement 300 mm overall length for extended reach Stable machining through a high-diameter shank A substantial 40 mm shank gives the holder exceptional torsional stability, which reduces vibration during grooving and parting tasks and therefore improves surface quality. The increased rigidity translates directly into consistent tool life for the insert and fewer reworks, so cycle times remain predictable. For operations where repeatability matters, the combination of shank diameter and robust clamping design supports stable cutting conditions even under intermittent or heavy engagement. Precise groove control with narrow cutting width The holder’s 3 mm cutting width is tailored for narrow-groove and parting work, enabling accurate slotting while keeping material removal localised. With a 50 mm cutting height, the tool supports deeper engagement when a single, secure setup is preferred over multiple passes. The geometry and indexing for 3C inserts allow straightforward insert seating and secure clamping, which simplifies tool setup and reduces downtime during insert changes. Reach and accessibility for longer components An overall length of 300 mm extends reach for workpieces with limited access or for setups requiring the tool to clear fixtures and chucks. The holder’s diameter at the cutting head and the overall balance deliver confident axial stiffness at reach, maintaining cutting stability. This makes the tool suitable for batch and one-off production where accessibility and precise positioning are necessary without compromising finish or dimensional control. Compatibility, handling and workshop integration Designed for use with 3C indexable inserts and specified shank designations (S40T / 3C-R S229), the holder integrates smoothly into existing tool setups. The moderate mass of 2.594 kg contributes to a grounded feel during mounting while remaining manageable for ordinary toolchanges. Routine maintenance is limited to secure clamping checks and insert seat cleaning; the simple mechanical design keeps service intervals short and predictable, supporting continuous operation in a busy turning department. For dependable grooving performance with Teknik Makina equipment, contact Metav Werkzeuge in Emmerich for personalised advice and procurement support Technical data Article number: K628TM Manufacturer: Teknik Makina Product: Stechklemmhalter (grooving clamp holder) For indexable inserts: 3C Shank designation: S40T Holder designation: 3C-R S229 Core measurements Shank diameter: 40 mm Overall length: 300 mm Cutting height: 50 mm Cutting width: 3 mm Diameter (head): 49 mm Weight: 2.594 kg Compatibility & features For indexable inserts type 3C Suitable for grooving and parting operations Stable clamping design for reduced vibration Designated for S40T shank systems FAQ What insert type is required for this holder? The holder is designed for 3C indexable inserts and seats inserts compatible with the 3C geometry. Which shank size fits the holder? The holder is specified for a 40 mm shank (S40T) and is supplied with the matching shank designation 3C-R S229. Is the holder suitable for deep grooving? Yes, with a cutting height of 50 mm the holder supports deeper single-pass engagements where the process and machine rigidity allow. How long is the holder and why does that matter? The overall length is 300 mm, which improves reach for workpieces with restricted access while maintaining axial stiffness for consistent cuts. What is the SKU and manufacturer of the holder? The item is listed as SKU K628TM and manufactured by Teknik Makina Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, metric tool that combines 4 mm accuracy with a low weight of 0.1 kg for efficient workshop work; order the Allen key directly via Metav Werkzeuge or consult the specialists for advice. Allen key (hex key) – 4 mm compact metric tool by Teknik Makina A compact Allen key (hex key) designed for metric fasteners in general workshop and maintenance applications 4 mm metric hex key Compact, low weight at 0.1 kg Reliable workshop maintenance tool Manufactured by Teknik Makina Precise size and dependable fit for metric fasteners The compact 4 mm hex key delivers a precise engagement with standard metric hex sockets, reducing rounding and fastener wear during assembly and maintenance. Its modest mass of 0.1 kg contributes to easier handling in confined spaces and lowers operator fatigue during repetitive tasks. Where repeatable torque application is required, the consistent profile of the tool supports accurate force transfer to bolts and screws, which speeds up operations and reduces rework in small to medium production areas. The measurable dimensions make integration into tool sets straightforward. Practical design for everyday workshop efficiency Designed with accessibility in mind, this metric hex tool slips into recesses and angled fittings where bulkier spanners cannot reach. The compact format aids rapid tool changes and tidy storage, helping to streamline workflows on the bench or mobile service trolleys. Thanks to its simple geometry, the key is compatible with a broad range of maintenance tasks and light assembly work; its straightforward use reduces the need for specialist training. The result is a practical, space-saving implement that supports faster turnaround times and cleaner, safer workstations. Manufacturer quality combined with Metav’s dependable supply Produced under the Teknik Makina label and distributed through Metav Werkzeuge, this metric tool benefits from a clear supply chain and reliable stock handling. Metav’s position as a precision partner for workshops and industry ensures access to consistent product availability and a transparent ordering process from Emmerich. The combination of a focused tool specification and Metav’s quality filter for the European market provides procurement managers with a pragmatic solution for standard maintenance inventories and starter tool kits. Order the Teknik Makina 4 mm Allen key via Metav Werkzeuge for assured availability from Emmerich, or request guidance from our consultants to confirm suitability for specific applications Technical data Article number: 4ALLENTM Manufacturer: Teknik Makina Eclass: 21189290 Specifications Key size: 4 mm Weight: 0.1 kg Features Type: Allen key (hex key) System: Metric Application: Workshop and maintenance tool Brand: Teknik Makina FAQ What size is the Allen key? The Allen key supplied by Teknik Makina is 4 mm (SKU 4ALLENTM), suitable for standard metric hex fasteners. Is this tool suitable for workshop maintenance? Yes. The Teknik Makina Allen key (hex key, SKU 4ALLENTM) is intended for general workshop and maintenance tasks where a compact metric tool is required. How heavy is the key and is it portable? The Allen key (SKU 4ALLENTM) weighs 0.1 kg, making it lightweight and easy to include in handheld tool kits or bench sets. Will this key fit metric sockets and fasteners? The 4 mm metric profile of this Allen key from Teknik Makina is designed to engage standard metric hex sockets reliably. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready set that combines versatile SCLCR holders with direct compatibility for CCMT 0602 indexable inserts; the combination reduces tool change time and simplifies inventory. Order the set directly via Metav Werkzeuge or consult our specialists for application-specific advice. Boring bar set for CCMT 0602 indexable inserts – versatile SCLCR holders, workshop-ready A Boring bar set for CCMT 0602 indexable inserts designed for external turning and facing tasks in general workshop and light production environments. Compatible with CCMT 0602 indexable inserts Contains four common SCLCR holder sizes Reduces tooling changes and keeps processes lean Workshop-suitable holders from Teknik Makina Fewer tool changes, faster throughput This holder assembly is engineered to work with CCMT 0602 indexable inserts, allowing quick insert swaps and standardised tooling across multiple turning operations. Using SCLCR-type holders streamlines the clamping process and shortens setup time, which translates into measurable cycle-time savings on repetitive turning and facing tasks. The standardised design supports consistent cutting geometry, so tool life and surface finish remain predictable even when less experienced operators perform the changeovers. Practical range for everyday machining demands The set contains a selection of holder shanks (A06-08H, A08-10J, A10-12K, A12-16M) that cover a broad span of diameters and reach requirements, enabling straightforward adaptation to different workpiece profiles without stocking many single holders. Each holder’s geometry is chosen to balance stability and access, helping to maintain concentricity and reduce vibration during cuts. This makes the set a sensible choice for workshops aiming to keep a compact but flexible tooling inventory while maintaining production quality. Integration into workshop processes and supply reliability Supplied as a coherent set, the holders are suitable for small-series production and maintenance shops that prioritise operational continuity. The set supports a pragmatic tooling strategy: fewer separate items to manage, faster procurement, and predictable compatibility with commonly used indexable inserts. For purchasers seeking supply chain reassurance, Metav’s Emmerich location serves as a logistical and quality filter for the European market, helping to ensure timely delivery and dependable stock information. Clear technical fit and maintenance guidance The holders are straightforward to service with standard workshop tools and follow familiar clamping routines used for SCLCR tooling. Regular inspection of clamping screws and seating faces maintains repeatable positioning and extends insert and holder lifetime. The modular nature of the holders supports quick replacement of consumable inserts without regrinding or complex reconditioning, which lowers overall operating costs and simplifies daily maintenance tasks. Contact Metav Werkzeuge for tailored sourcing or to discuss which holder configuration from Teknik Makina best suits specific machining setups; Metav’s consultants can advise on integration and delivery from the Emmerich hub Technical Data SKU: IPS07TM Product type: Boring bar set Suitable for: CCMT 0602 indexable inserts Brand: Teknik Makina Content overview: A06-08H SCLCR 06, A08-10J SCLCR 06, A10-12K SCLCR 06, A12-16M SCLCR 06 ECLASS: 21189217 Numbers / Core technical data Pieces per set: 4 Set: yes SKU code: IPS07TM Special features / Versions Holder type: SCLCR Compatibility: CCMT 0602 Label: Bohrstangen-Set CCMT 0602 Category: Zerspanen FAQ What insert type fits these holders? The holders are designed specifically for CCMT 0602 indexable inserts; the geometry and pocket fit are matched to that insert family. Which holder sizes are included in the set? The set contains A06-08H, A08-10J, A10-12K and A12-16M SCLCR holders as listed in the product content. Can the holders be used for facing as well as turning? Yes, the boring bar set is suitable for external turning and facing operations where CCMT 0602 inserts provide the appropriate cutting geometry. Is this set suitable for small-batch production? The holder selection and rapid insert changeability make the set well suited to small-batch and jobbing environments that benefit from reduced tooling complexity. Who manufactures the set and what is the SKU? The set is offered by Teknik Makina and sold under SKU IPS07TM; technical and ordering details are available through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a compact, compatible tooling package and the flexibility of SCLCR holder sizes, this set streamlines external turning tasks and reduces changeover times; order directly via Metav Werkzeuge or consult the technical team for selection guidance. Boring Bar Set for CCMT 0602 Indexable Inserts — 4-piece turning bar assortment (Teknik Makina) Boring Bar Set for CCMT 0602 Indexable Inserts provides a ready-made assortment of external turning bars designed for use with standard CCMT 0602 indexable inserts in workshop and industrial lathe applications Fits CCMT 0602 indexable inserts Four-piece set for flexible tooling Selection of common SCLCR holder sizes SKU IPS14TM for clear identification Consistent compatibility to reduce tool inventory The Boring Bar Set is engineered for straightforward integration with CCMT 0602 indexable inserts, offering consistent geometry and secure clamping across the included holders. By standardising on a single insert type and a matched set of holders, shops benefit from simplified stock management and fewer insert variants to keep on the shelf. The arrangement of SCLCR-style holders means repeatable set-up and predictable cutting head position, which supports process stability and lowers the frequency of corrective adjustments during production. Practical coverage for common external turning tasks Supplied as a four-piece set, the assortment spans typical holder dimensions — listed as S06-08H, S08-10J, S10-12K and S12-16M — enabling efficient handling of a range of outer diameters without frequent tool swaps. This layout reduces machine downtime and accelerates job changeover, while retaining the adaptability of indexable tooling for both short-run and batch production. Clear identification via SKU IPS14TM aids procurement and inventory tracking, helping maintenance teams and purchasing staff to order the correct configuration rapidly. Reliable sourcing and workshop-ready supply chain Selection of compatible toolholders and indexable inserts is followed by a tested supply route from the manufacturer and distributor, ensuring continuity of supply for day-to-day machining. Metav’s position as a precision partner means an extensive product range and a proven logistics channel from Emmerich to the European workshop floor. The emphasis on durable socket-and-shank combinations and standard insert geometry supports long-term process reliability and reproducible surface finishes, while the compact set format helps smaller workshops adopt industrial-grade solutions without unnecessary complexity. For technical selection or to secure this Teknik Makina turning-bar set with CCMT 0602 compatibility, contact Metav Werkzeuge for tailored advice and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: IPS14TM Label: Bohrstangen-Set CCMT 0602 Manufacturer: Teknik Makina Product type: Boring Bar Set ECLASS: 21189217 Facts Pieces per set: 4 Set: true Special features Compatible with CCMT 0602 indexable inserts Holders listed in content: S06-08H SCLCR 06; S08-10J SCLCR 06; S10-12K SCLCR 06; S12-16M SCLCR 06 Content field provided as delivered configuration FAQ Which insert size does this set accept? The set is specified for CCMT 0602 indexable inserts and the holders are matched to that insert geometry for correct clearance and rake. How many holders are included in the set? The package contains four holders as stated in the content list (S06-08H; S08-10J; S10-12K; S12-16M) and is sold as a four-piece set under SKU IPS14TM. Are the holders SCLCR types suitable for external turning? Yes, the SCLCR-style holders in this assortment are intended for external turning applications and are configured to accept the CCMT 0602 insert shape. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, space-saving fastening with a Torx drive and an M3.5 thread for reliable assemblies; combine secure engagement and precise dimensions for efficient production. Order this fastener directly via Metav Werkzeuge or consult our specialists for compatibility checks. Torx screw TC067TM — M3.5 thread, 8.5 mm length by Teknik Makina Torx screw TC067TM for compact mechanical assemblies, designed to deliver secure drive engagement and precise thread compatibility in confined spaces Torx drive for secure engagement Nominal diameter 5.3 mm Thread M3.5 standard Compact 8.5 mm total length Consistent torque transfer for dependable assembly results The Torx geometry is engineered to reduce cam‑out and provide improved torque transmission compared with slotted or Phillips drives. In practice this means assembly processes become more reliable and repeatable: a stable driver engagement reduces slip and wear on both tool and fastener; the combination of the Torx interface and the specified T15 matching key ensures a controlled transfer of force. For engineering teams this translates into fewer reworks and smoother production flow when fitting small components. Precision dimensions that save space and simplify design With a nominal diameter of 5.3 mm and a total length of 8.5 mm, the fastener is suitable for tight assemblies where clearance is limited. The external thread designated M3.5 conforms to standard metric sizing, enabling predictable mating with corresponding tapped holes or inserts. Designers benefit from the compact profile when specifying fastenings for enclosures, panels or small brackets, since predictable thread engagement and controlled head geometry support consistent clamping without excessive protrusion. Workshop efficiency and straightforward inventory management As a standardised metric fastener, the item streamlines procurement and tool selection across routine maintenance and assembly tasks. The relatively small mass (0.1 kg stated) aids logistics planning for storage and shipping bundles, while compatibility with the T15 driver reduces the number of specialised tools required on the workbench. Supplied under the Teknik Makina designation, the component is intended as a practical choice for small‑part assembly where standardisation and accessibility are priorities. Proven supply and service through a trusted partner Sourcing through Metav aligns the technical benefits of the fastener with dependable distribution and quality control. Metav’s role as a “quality filter” for the European market means buyers gain access to consistent stock, product verification and a broad range of workshop supplies alongside measurement and tooling solutions. This combination of a reliable feed of standard parts and technical consultancy supports long‑term operational stability in manufacturing and maintenance settings. For availability and order details of the Teknik Makina Torx screw TC067TM, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for precise product information and stock status Technical Data Article number: TC067TM Manufacturer: Teknik Makina eCl@ss: 21189290 Core technical data Weight: 0.1 kg Diameter: 5.3 mm Thread: M3.5 Total length: 8.5 mm Head angle: 60° Features Drive type: Torx Suitable key: T15 Brand: Teknik Makina FAQ What driver fits this screw most effectively? The screw is designed for a Torx drive and is compatible with a T15 Torx key for optimal engagement. Which thread standard does the fastener use? This fastener uses an M3.5 metric thread suitable for corresponding tapped holes and standard inserts. What are the primary dimensions to consider during design? Key dimensions are a nominal diameter of 5.3 mm, a total length of 8.5 mm and a head angle of 60°, which help define clearance and engagement depth. Is this part a Teknik Makina product and what is the SKU? Yes — the item is listed under Teknik Makina and is supplied as TC067TM. For which kinds of assemblies is this fastener appropriate? The component is intended for compact mechanical assemblies and small fittings where a secure Torx drive and short overall length are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure fastening, a compact 12.5 mm length and standard M4 thread for reliable, space-saving assemblies; order the fastening solution directly via Metav Werkzeuge or consult the advisors for specification support. Torx screw TC076TM by Teknik Cutting Tools — M4 thread, 12.5 mm length The Torx screw is a compact fastening element designed for precision assemblies and confined fittings in mechanical and electronic applications Secure Torx drive for high torque transmission M4 metric thread for standard assembly fittings Compact 12.5 mm length for confined spaces 60° countersink angle for flush seating Precise fastening that prevents cam‑out and loosening The Torx drive design provides reliable engagement between driver and head, which reduces the risk of cam‑out under torque and improves assembly consistency. With an M4 thread and a 12.5 mm length, this fastener suits shallow joins and small fixtures where predictability matters. The combination of a narrow 5.5 mm diameter head and a 60° countersink angle enables neat, flush mounting in thin materials, improving both function and appearance while simplifying post‑assembly processes. Installation benefits and recommended tooling Installation is optimised for workshop efficiency: the fastener is intended for a T15 driver, ensuring correct bit fit and repeatable torque application. Using the correct driver reduces wear on both tool and fastener and contributes to faster cycle times on assembly lines or during repair work. The Torx geometry also supports higher torque transfer compared with slotted or Phillips heads, which is particularly useful for assemblies that demand secure clamping without over‑stress. Designed for compact and precise assemblies As a compact fastener, this component is well suited to instruments, enclosures and mechanical fixtures where space is limited and tolerances are tight. The controlled geometry of the head and thread supports consistent seating and reduces the need for rework. Lightweight and unobtrusive, the item helps maintain the design integrity of delicate housings and small machines while delivering the mechanical security expected in professional settings. Supply reliability and provenance assurance Sourced from Teknik Cutting Tools and offered via Metav Werkzeuge, the fastener benefits from a distribution channel that emphasises availability and quality assurance. Metav’s approach to making precision accessible for workshops ensures that such components are supported by clear stock information and fast order processing, helping to keep production lines moving and maintenance work on schedule. For technical queries, batch requirements or advice on using Teknik Cutting Tools Torx screws in specific assemblies, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 to arrange precise supply and specification support Technical data Article number: TC076TM Manufacturer: Teknik Makina ECLASS: 21189290 Weight: 0.1 kg Measurements Thread: M4 Diameter: 5.5 mm Total length: 12.5 mm Countersink angle: 60° Design & compatibility Drive: Torx Recommended driver: T15 driver Product type: Torx screw FAQ What driver is required to tighten this screw? The Torx screw TC076TM is designed for a T15 driver, which ensures correct engagement and consistent torque transfer during assembly. Will this screw sit flush in a countersunk hole? Yes, the TC076TM features a 60° countersink angle, allowing it to seat flush in appropriately prepared countersunk holes for a neat finish. What thread size does the fastener use? The TC076TM uses an M4 metric thread, making it compatible with standard M4 threaded components and inserts. Where is this fastener typically used? The Teknik Cutting Tools Torx screw TC076TM is intended for precision assemblies such as small enclosures, instrument housings and mechanical fixtures where compact, secure fastening is required. What are the head diameter and overall length of the screw? The TC076TM has a head diameter of 5.5 mm and a total length of 12.5 mm, designed for confined spaces and shallow material thicknesses. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure Torx connection and standard M4 threading for consistent assembly performance; the combination of a Torx head, a nominal 5.5 mm diameter and a defined 60° head geometry supports reliable torque transfer and repeatable fastening — order via Metav Werkzeuge or contact the consultants for specification advice. Torx screw TC073TM — M4 thread, 5.5 mm nominal diameter by Teknik Makina Torx screw TC073TM designed for secure mechanical fastening in industrial and workshop assemblies, suitable for standard metric fittings and driven with a Torx T15 tool Secure Torx head for high torque M4 metric thread for standard fittings 5.5 mm nominal diameter Requires Torx T15 driver High torque retention and reduced cam‑out for efficient assembly The Torx head geometry delivers superior torque transmission compared with slotted or Phillips profiles, which reduces the risk of cam‑out during tightening. Combined with the M4 thread, this fastener ensures consistent clamping force in light to medium duty assemblies; the specified 5.5 mm nominal diameter is matched to the thread form to provide stable engagement. The listed 60° head angle contributes to controlled seating where a countersunk finish is required, allowing a flush appearance and predictable load distribution. These characteristics translate directly into fewer rework cycles and faster cycle times on repetitive assembly tasks. Practical compatibility and workshop handling benefits The fastener is prepared for standard workshop tooling: a Torx T15 driver fits the head profile for rapid insertion and secure torque application. The item is compact and of low listed mass (0.1 kg), aiding handling and reducing shipping bulk when small quantities are required. Because the design focuses on mechanical reliability rather than decorative finishes, the component integrates well with maintenance procedures and retrofit operations where metric thread conformity and repeatable torque behaviour are priorities. Clear driver selection and standard threading simplify inventory management across production and service departments. Sourcing and application confidence for industrial users Produced by Teknik Makina, the component matches expectations for a basic, reliable threaded fastener for industrial use. The specification supports applications in jigs, fixtures, enclosure assemblies and general workshop repairs where a dependable metric fastener is required. Procuring through Metav places this component within a broader supply chain advantage: centralised access to precision tools and fasteners, steady stock levels and transparent order processing from Emmerich. The result is a practical balance of availability and specification conformity that helps to keep production lines and maintenance bays moving. For fast, reliable procurement of Teknik Makina fasteners such as the Torx screw TC073TM and personalised technical guidance, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and ordering assistance Technical data Article number: TC073TM Manufacturer: Teknik Makina ECLASS: 21189290 Core specifications Diameter: 5.5 mm Thread: M4 Overall length: 1 Weight: 0.1 kg Materials & features Head angle: 60° Driver compatibility: Torx T15 SKU: TC073TM FAQ What driver is required for this screw? The Torx screw TC073TM is specified for a Torx T15 driver to ensure correct engagement and torque transfer. What thread standard does the fastener use? This threaded fastener is supplied with an M4 metric thread suitable for standard metric mating threads. Is the head geometry suitable for flush mounting? Yes, the indicated 60° head angle supports countersunk seating for a flush finish in compatible components. Can this fastener be used in maintenance and retrofit work? The TC073TM by Teknik Makina is intended for general workshop and industrial applications where a reliable metric fastener and Torx drive are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, reliable fastening solution that combines a standard M4 thread with a 7 mm overall length for shallow assemblies, a 5.5 mm head diameter for consistent seat, and a Torx T15 drive for reduced cam‑out and predictable torque behaviour; order via Metav Werkzeuge or consult our specialists for batch supply and application advice Torx screw TC074TM (M4 x 7 mm, Torx T15) — Teknik Makina A Torx screw TC074TM designed for precise, repeatable fastening in general assembly and workshop applications where a T15 driver is used M4 thread for standard fastenings Short 7 mm length for confined assemblies Torx T15 drive reduces cam‑out risk 60° seat angle for reliable countersinking Secure fastening with consistent torque and fit This compact fastener provides a M4 thread combined with a 7 mm overall length and a 5.5 mm head diameter, delivering a predictable clamping result in small or shallow assemblies. The Torx T15 drive form reduces slippage and enables higher applied torque than comparable cross‑head types, which translates into fewer damaged heads and fewer reworks. For engineers specifying fixings in jigs, housings or light assemblies, the combination of thread dimension and short shank offers a neat balance between holding performance and minimal protrusion. Easier installation and clean countersinking for finishing The 60° seat angle ensures a clean, flush finish when paired with a matching countersink, improving load distribution and aesthetic appearance at the joint. Compatibility with a T15 key or driver bit makes assembly straightforward with standard hand or powered drivers, enabling faster cycle times on repetitive tasks. The fastener’s compact mass (listed as 0.1 kg) suits small parts production and reduces handling bulk for loose packs; the drive geometry also helps reduce operator fatigue during batch assembly by lowering the need for corrective actions. Supply reliability and why this choice supports workflow continuity Sourced from Teknik Makina, this Torx screw is supplied through Metav Werkzeuge’s logistics in Emmerich, combining manufacturer expertise with a European distribution filter that supports steady availability for industry and trade. Choosing this fastener helps simplify procurement for workshops and production lines that require standardised, repeatable fixings. Metav’s broad product range and established stock management reduce supplier multiplicity while offering traceable quality for repeat orders and project planning. For reliable procurement of Teknik Makina fasteners such as the TC074TM Torx screw, contact Metav Werkzeuge GmbH in Emmerich for batch availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TC074TM Manufacturer: Teknik Makina EClass: 21189290 Facts Thread: M4 Diameter: 5.5 mm Overall length: 7 mm Seat angle: 60° Weight: 0.1 kg Special features Drive: Torx T15 (compatible with T15 key) Short shank for confined assemblies Countersunk seat geometry FAQ What thread size does this screw use? The Torx screw TC074TM features an M4 thread suitable for standard metric threaded holes and inserts. Which driver is required to install this fastener? Installation is performed with a T15 Torx driver or compatible T15 key; the TC074TM is optimised for Torx engagement to reduce cam‑out. Is the head suitable for countersunk installation? Yes, the fastener has a 60° seat angle intended for flush countersinking and even load distribution in finished assemblies. What are the length and head dimensions? The TC074TM has an overall length of 7 mm and a head diameter of 5.5 mm, designed for compact, low‑profile joints. Which applications suit this Torx screw? This fastener is appropriate for light mechanical assemblies, enclosures, fixtures and where a reliable, tamper‑resistant head engagement is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the M4 thread and compact 5.8 mm diameter for secure clamping and straightforward installation; benefit from consistent toolholding in confined setups and consult Metav Werkzeuge for ordering or technical advice. Screw TC172TM for End Mill — M4 thread, 5.8 mm diameter (Teknik Makina) The Screw TC172TM is a compact clamping screw designed to secure end mills in tight tool-holder assemblies, offering a small footprint and simple hex-key assembly for reliable tool retention. M4 threaded clamping screw 5.8 mm outer diameter 9 mm total length Requires hex key T15 Reliable clamping that reduces runout and rework The central advantage of the fastener lies in its M4 thread, which provides repeatable axial force and stable retention during milling operations. Consistent clamping reduces micro-movement of the cutting tool, thereby lowering the risk of tool chatter and premature wear. This stability supports process reliability and helps maintain dimensional accuracy on workpieces, so fewer reworks are necessary and cycle-time consistency improves. Space-saving dimensions for compact tool stations With an outer diameter of 5.8 mm and a 9 mm total length, the component is optimised for setups where space is limited. The compact profile enables use in close-packed tool arrangements and multi-tool fixtures without interfering with adjacent holders or cutters. Such a small form factor supports flexible tooling layouts and can simplify retrofitting into existing spindles or adapters where clearance is critical. Simple assembly and workshop compatibility for faster changeovers Assembly requires a T15 hex key, a common size in workshop toolkits, which makes installation and removal quick and predictable. The lightweight construction (listed weight 0.1 kg) and standardised thread and drive type reduce the need for specialised tools and spare parts inventory. For maintenance planners and toolroom managers this translates into shorter tool-change times and lower operational friction in everyday machining routines. For purchasing and tailored technical guidance on Teknik Cutting Tools components such as the Screw TC172TM, contact Metav Werkzeuge — quick delivery and expert advice are available from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TC172TM Designation: Screw for end mill Manufacturer: Teknik Makina ECLASS: 21189290 Facts Diameter: 5.8 mm Thread: M4 Total length: 9 mm Weight: 0.1 kg Special features Requires hex key T15 Intended for securing end mills Compact clamping geometry FAQ Is this screw suitable for standard end mills? The Screw TC172TM is designed specifically for securing end mills and is compatible with common tool-holder geometries where an M4 clamping screw is specified. Which tool is required to install the screw? Installation and removal are performed with a T15 hex key, a standard workshop tool compatible with this clamping screw. What are the key dimensions to check before ordering? Confirm the 5.8 mm diameter, M4 thread and 9 mm total length match the tool-holder or adapter specification; these are the critical dimensions for compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from precise diameter adaptation and secure Torx fastening for a faster, more reliable boring process. The combination of compatibility with CCMT 09T3 inserts and a broad 50–82 mm range supports flexible tool setups and reduced downtime. Order the cartridge directly via Metav Werkzeuge or consult the specialists for application advice. Cartridge 50–82 mm for Boring Tool (THB08TM) – Teknik Makina The Cartridge 50–82 mm for Boring Tool is a precision adapter designed for use in boring tool sets to accommodate diameters from 50 to 82 mm within turning and internal machining applications Cartridge for boring tool sets 50–82 mm range Compatible with CCMT 09T3 indexable inserts Torx T15 fastening with M3.5x8.5 screws SKU THB08TM for quick identification Faster setup through precise diameter adaptation The cartridge delivers a reliable way to adapt boring holders across a wide diameter span without time-consuming custom work. By covering the 50–82 mm range, the adapter reduces the need for multiple dedicated holders and simplifies inventory. This consolidation improves throughput and supports more efficient job planning, while the precise fit helps maintain concentricity and consistent workpiece quality. Secure clamping and straightforward insert compatibility Designed to accept CCMT 09T3 indexable inserts, the cartridge enables simple cutting-edge replacement with established carbide grades. The clamping is secured by a Torx T15 drive and M3.5x8.5 screws, ensuring firm retention under machining loads and minimising the risk of loosening during operation. Clear mechanical fixing translates into stable cutting conditions and predictable surface finishes for internal turning and boring operations. Practical benefits for workshops and small-series production The cartridge is particularly suited to machine shops and maintenance workshops that require flexibility and short changeover times. The compact adapter supports quick swapping between toolheads and guarantees repeatable positioning, which is valuable for small-series production and repair work. Combined with a partner such as Metav, this component helps streamline the tool park and maintain supply reliability for everyday manufacturing demands. For application guidance or to arrange a supply from Metav Werkzeuge, contact our consultants who can advise on compatibility and delivery from the Emmerich stock. Technical data Article number: THB08TM Description: Cartridge 50–82 mm for Boring Tool Manufacturer: Teknik Makina eClass: 21041590 Facts Diameter range: 50–82 mm Torx key size: T15 Torx screw: M3.5x8.5 Suitable inserts: CCMT 09T3 Special features Designed for use in boring tool sets Indexable insert compatibility Secure Torx fastening system FAQ Which insert type fits this cartridge? The cartridge accepts CCMT 09T3 indexable inserts and is configured for their standard seating and clamping. What diameter range does the cartridge cover? The adapter covers a diameter range of 50–82 mm for internal boring operations. What fastening system is used for the tool clamping? Clamping is secured via a Torx T15 drive using M3.5x8.5 screws for reliable retention. Is this cartridge suitable for general workshop use? Yes, the cartridge is intended for machine shops and workshops requiring flexibility and quick tool changes. What is the product SKU for ordering? The SKU for ordering and identification is THB08TM. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Efficient 45° facing performance meets compact mounting: the head combines a 45° cutting geometry with a 22 mm shank and four cutting edges to deliver consistent finishing and predictable tool life — order the component directly via Metav Werkzeuge or consult our advisers for application advice. Face Milling Head T560TM — 45° cutter head for SEET 12T3 indexable inserts (Teknik Makina) The Face Milling Head T560TM is a 45° cutter head engineered for precise facing and finishing with SEET R245 12T3 indexable inserts, suitable for light- to medium-duty turning and facing tasks in production and workshop environments 45° cutting geometry for precise facing 22 mm shank for secure clamping Compatible with SEET R245 12T3 inserts (Sandvik, XTC, ZCC) Four cutting edges for efficient material removal Consistent surface quality through optimised geometry The 45° geometry delivers a reduced effective cutting angle and smoother chip flow, which improves surface finish while lowering peak forces. With the 45° cutting angle and insert family SEET R245 12T3, this cutter head is configured to produce repeatable facing results on workpieces where dimensional consistency matters. The design helps to spread wear across the insert edge, extending the usable life of each indexable cutting edge and reducing changeover frequency for the production line. Precision-oriented shops will appreciate the controlled chip evacuation and stable cutting conditions that contribute to predictable cycle times. Compact mounting and reliable fixation for stable operations A compact profile with a 22 mm shank and an overall length of 40 mm makes the head easy to integrate into common toolholders while keeping overhang to a minimum. The head uses M3.5x11 Torx clamping screws and an M5x7 hex screw for secure insert retention; the matching Torx key size is T15, supporting quick, toolroom-friendly insert changes. The small mass (0.345 kg) and 50 mm head diameter combine to reduce vibration and permit higher feed rates without compromising finish. These mechanical details ensure robust clamping and minimise downtime during index changes. Broad compatibility reduces tooling variants in the workshop Designed for the SEET R245 12T3 insert form, the head accepts indexable inserts from major manufacturers including Sandvik, XTC and ZCC, enabling standardisation across multiple machine stations. This cross-brand compatibility allows production planners to consolidate inventory and specify a single cutter head where previously several types were required. The four cutting edges of the head enable economical use of inserts and facilitate uninterrupted production, making the component a pragmatic choice for workshops seeking to simplify procurement while maintaining cutting performance. Built for dependable use in everyday machining The cutter head’s combination of a compact 50 mm design, secure fixing and a four-edge configuration supports reliable performance across repetitive facing tasks. The geometry and mechanical interface are selected to deliver a balance of precision, durability and ease of maintenance so that shopfloor teams can focus on throughput rather than frequent tool adjustments. Backed by Teknik Makina engineering, the head is a practical addition for operations that value consistent part quality and straightforward tool logistics. Order the Teknik Makina Face Milling Head T560TM via Metav Werkzeuge for a straightforward upgrade to facing capability, or contact our consultants at Metav Werkzeuge for tailored application guidance Technical data Article number: T560TM Brand: Teknik Makina Description: Face milling head for SEET 12T3 indexable inserts Facts Shank diameter (d): 22 mm Head diameter: 50 mm Overall length: 40 mm Cutting angle: 45° Weight: 0.345 kg Cutting edges: 4 ECLASS: 21181015 Special features Compatible inserts: SEET R245 12T3 Compatible brands: Sandvik, XTC, ZCC Torx screw: M3.5x11 Hex screw: M5x7 Torx key: T15 U-plate: TA052 FAQ Which insert type is required for this cutter head? The face milling head accepts SEET R245 12T3 indexable inserts and is prepared for use with inserts from Sandvik, XTC and ZCC. What is the shaft diameter for mounting? The tool is supplied with a 22 mm shank diameter suitable for standard 22 mm toolholder bores. How many cutting edges are available per head? The head features four cutting edges, enabling economical indexable-insert use and uninterrupted machining cycles. Which screw types are used for insert clamping? Insert retention uses an M3.5x11 Torx screw and an M5x7 hex screw; the Torx key size is T15. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑rigidity 90° milling solution that accepts LNMT 1306 indexable inserts and reduces changeover time. The combination of a Ø 50 mm head, a 22 mm mounting bore and secure M4x10 Torx fastening supports stable side milling operations; order directly via Metav Werkzeuge or consult their technical advisors for application-specific guidance. Eckmesserkopf — 90° corner milling head for LNMT 1306 indexable inserts by Teknik Makina Eckmesserkopf is a compact 90° corner milling head designed for side milling and shoulder operations with LNMT 1306 indexable inserts, offering a space‑saving solution where rigidity and quick insert changes are essential. 90° corner milling geometry Compatible with ISCAR LNMT 1306 inserts Ø 50 mm diameter, 22 mm mounting bore Supplied with M4x10 Torx screw and T15 key Better cycle stability through rigid 90° geometry A toolholder with a defined 90° cutting angle provides predictable force vectors during side milling and shoulder passes. The combination of Ø 50 mm head diameter and a solid 22 mm mounting bore increases stiffness at the cutting zone, which reduces vibration and improves surface finish. For production environments where consistent cycle time and repeatability matter, the compact geometry translates into fewer rejects and more uniform part dimensions. The modest mass of 0.337 kg keeps the assembly light without sacrificing stability. Minimise downtime with proven insert compatibility Fast changeovers and a broad supply chain are decisive in shopfloor productivity. This head accepts LNMT 1306 indexable inserts and is ISCAR-compatible, which simplifies procurement and stocking routines. The standardised clamping interface and the supplied M4x10 Torx screw (Torx key T15) enable quick and secure insert changes while preserving cutting edge position. For manufacturers running mixed tool inventories, the compatibility reduces tooling complexity and shortens setup times. Compact design that fits tight fixtures and delivers accuracy With an overall length of 40 mm and a compact head profile, the toolholder is engineered for installations where space is restricted but precision cannot be compromised. The short projection lowers bending moments and maintains cut stability on narrow shoulders or deep pocket entries. The measured Ø 50 mm across the cutting head and the concise overall length enhance access to tight features while enabling the use of robust cutting parameters for efficient material removal. Practical fastening and handling for everyday workshop use Operational reliability starts with simple, repeatable clamping. The head is supplied with an M4x10 Torx screw secured by a T15 key, ensuring a consistent clamping torque and minimal risk of insert movement under load. The straightforward fastening arrangement supports routine maintenance and tool rotation schedules, making the head suitable for both single‑shift operations and continuous production runs. The design keeps service tasks quick and reduces the time tools spend out of production. For application advice or to arrange procurement of the Teknik Makina 90° corner milling head, contact Metav Werkzeuge GmbH — email info@metav-werkzeuge.com or phone +49 2822 7131930; Metav’s specialists will advise on integration and availability. Technical Data Article number: T228TM Manufacturer: Teknik Makina Product designation: Eckmesserkopf for LNMT 1306 indexable inserts Weight: 0.337 kg Core data Diameter: 50 mm Overall length: 40 mm Mounting bore / shank diameter: 22 mm Cutting angle: 90° Number of cutting edges: 5 Torx screw: M4x10 Torx key: T15 Features ISCAR-compatible Designed for LNMT 1306 indexable inserts Compact head for tight fixtures Supplied ready for installation FAQ What inserts fit this corner milling head? The head is designed for LNMT 1306 indexable inserts and is compatible with ISCAR variants specified for this insert designation. Is the mounting diameter suitable for standard toolholders? Yes, the 22 mm mounting bore matches common compact toolholder interfaces used in milling assemblies. Which fastening hardware is supplied with the tool? The tool is supplied with an M4x10 Torx screw and requires a T15 key for secure clamping of the insert. Can this head be used for shoulder milling on hardened materials? The head provides a rigid platform for shoulder milling; selection of appropriate inserts and cutting data is required for hardened materials to ensure tool life and surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Order with confidence: combine precise 90° geometry, secure clamping and broad insert compatibility to reduce set-up time and improve repeatability. Choose fast delivery and expert advice from Metav Werkzeuge for reliable workshop supply. Teknik Makina 90° corner tool head – for ANKX 1607 indexable inserts The Teknik Makina 90° corner tool head is a compact turning head designed for external turning where a right‑angled tool orientation and reliable insert clamping are required 90° head for accurate external turning Compatible with ANKX/ANMX 1607 inserts 22 mm tool shank for stable clamping Secured with M4.5×11 Torx screw (T15) Accurate 90° geometry for consistent turning results The 90° cutting angle ensures a predictable tool path and stable contact between insert and workpiece, which translates into consistent dimensional results and reduced rework. The design is optimised for use with ANMX/ANKX 1607 indexable inserts, allowing familiar insert geometries to be used without modification to the machining programme. For operations where flank finish and repeatability matter, this orientation reduces the need for frequent adjustment and supports efficient, repeatable setups. Stable clamping and quick insert changes to keep production moving A 22 mm shank provides secure mounting in standard toolholders and improves resistance to chatter during heavier cuts. The insert pocket is held by an M4.5×11 Torx screw and tightened with a T15 key, creating a compact, low‑profile assembly that simplifies changing and indexing inserts. The combination of a robust shank and reliable screw fixing minimises downtime during tool changeovers, supporting shorter cycle times and smoother process flow in daily workshop routines. Compact form factor with practical compatibility for workshop workflows With a head diameter of 50 mm, an overall length of 40 mm and four cutting edges, the unit balances accessibility and rigidity in a small footprint. The compact dimensions make it suitable for confined setups where larger holders would interfere, while the compatibility with common indexable inserts keeps inventory low and tooling familiar. The result is a pragmatic solution for small‑batch production or mixed machining environments where flexibility and dependable fixtures are priorities. For demanding right‑angle turning tasks, opt for the Teknik Makina 90° corner tool head and contact Metav Werkzeuge for tailored advice and prompt delivery from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: T171TM Description: 90° corner tool head for ANKX 1607 Indexable Inserts Manufacturer: Teknik Makina Data Diameter: 50 mm Overall length: 40 mm Shank (mount) diameter: 22 mm Weight: 0.307 kg Number of cutting edges: 4 Cutting angle: 90° Torx screw: M4.5×11 Torx key: T15 Special features Compatible with ANMX / ANKX 1607 indexable inserts Compact, low‑profile construction Secure screw clamp for quick insert changes Suitable for external turning and right‑angle tool orientations FAQ Which inserts fit this turning head? The turning head accepts ANMX/ANKX 1607 indexable inserts; the geometry and pocket are designed for these insert types to ensure correct seating and cutting performance. What shank diameter is required for mounting? A 22 mm shank is specified for the holder; the 22 mm mount provides stable clamping in compatible toolholders. How is the insert secured? Inserts are held by an M4.5×11 Torx screw tightened with a T15 key to ensure a compact and reliable clamping interface. What applications suit this tool head? The component is intended for external turning and other right‑angle operations where a 90° tool orientation and use of ANMX/ANKX 1607 inserts are beneficial. What is the article number and weight? The article number is T171TM and the weight is 0.307 kg Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the 90° cutting geometry and 22 mm mounting shank for dependable corner turning and consistent tool life; compatibility with WNGX 0806 indexable inserts adds versatility across common turning tasks. Order the corner turning head directly via Metav Werkzeuge or consult their specialists for application advice. Corner turning head for WNGX 0806 indexable inserts — 90° — Teknik Makina Corner turning head for 90° external corner turning with WNGX 0806 indexable inserts, designed for stable clamping in light to medium turning operations 90° cutting geometry for accurate corner cuts Compatible with WNGX 0806 indexable inserts 22 mm mounting shank for stable clamping M5x12 Torx screw and T20 key specification High-precision geometry for repeatable corner turning The compact turning head features a 90° cutting angle that provides a consistent engagement geometry for corner operations. With a 50 mm head diameter and a 22 mm mounting shank, the assembly gives a rigid connection to the toolpost which reduces chatter and improves surface finish. The component weight of 0.277 kg and an overall length of 40 mm contribute to a low overhang, lowering bending moments and extending insert life. This combination of dimensions is advantageous when machining narrow shoulders or external corners where tool stability and repeatability matter most. Fast insert handling and maintenance benefits Designed for use with WNGX 0806 indexable inserts, the head accepts commonly available carbide grades from Korloy, enabling quick material- and application-specific choices. The clamping system is specified with an M5x12 Torx screw and a T20 key interface, simplifying insert changes and minimising downtime during batch production or tool replacement. The head incorporates five cutting edges arrangement, allowing multiple indexings before replacement, which reduces tooling costs and maintenance frequency. Clear, standardised interfaces make the holder compatible with typical lathe toolposts and toolholders in industrial workshops. Application scope and procurement confidence The turning head is suitable for general steel turning and related workshop applications where precise corner definition and short tool overhangs are required. As a product supplied under Teknik Makina designation and stocked through Metav’s distribution, procurement benefits from a central European quality filter: Metav’s Emmerich facility ensures consistent inspection and reliable delivery. Metav’s decades of precision experience, broad product range and established customer base support sustained production planning and inventory rationalisation, providing reassurance for purchasing decisions. For reliable 90° corner turning choose Teknik Makina’s corner turning head and contact Metav Werkzeuge for ordering and technical advice from Emmerich. Technical data Article number: T775TM Manufacturer: Teknik Makina Compatible inserts: WNGX 0806 Compatible insert manufacturer: Korloy Facts Mounting shank diameter: 22 mm Head diameter: 50 mm Overall length: 40 mm Weight: 0.277 kg Cutting angle: 90° Number of cutting edges: 5 Special features For WNGX 0806 indexable inserts Torx screw: M5x12 Torx key fit: T20 Compact design for reduced overhang FAQ What insert form does the turning head accept? The turning head accepts WNGX 0806 indexable inserts and is compatible with Korloy insert geometries for that size. Which toolholder mounting diameter is required? A 22 mm mounting shank is specified for stable clamping in standard toolposts. Is a special screw or key required for insert clamping? Insert clamping uses an M5x12 Torx screw with a T20 key interface. How does the compact design affect machining performance? The reduced overall length and 50 mm head diameter lower overhang and bending moment, improving rigidity and surface finish during corner turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable 90° cutting geometry combined with quick compatibility for XNEX 0806 indexable inserts to keep cycle times predictable and tool changeovers efficient. Order the tool directly via Metav Werkzeuge or consult their specialists for integration support. T840TM Angle Tool Holder (90°) — for XNEX 0806 Indexable Inserts, by Teknik Makina The T840TM angle tool holder is a compact turning head engineered for accurate 90° facing and external turning using XNEX 0806 indexable inserts. 90° cutting angle for reliable facing operations Compatible with XNEX 0806 indexable inserts 22 mm shank diameter for secure clamping Torx screw M4x12.5, T15 Maintain process consistency with a rigid 90° geometry The T840TM is built around a defined 90° cutting angle that stabilises the contact between insert and workpiece. This geometry reduces off-axis loads and supports repeatable part accuracy, especially during facing and square shoulder operations. The holder’s Ø50 head diameter and 45 mm overall length contribute to a compact footprint while preserving rigidity; the reduced overhang helps to lower chatter risk and to sustain consistent tool life, which benefits batch production and serial machining alike. Fast, predictable indexable insert handling for reduced downtime Designed specifically for XNEX 0806 indexable inserts, the tool holder enables quick insert indexing and predictable seating. Compatibility with established brands such as SECO and WINSTAR ensures access to a broad range of insert grades and geometries for different materials. The clamping system uses a M4x12.5 Torx screw with T15 specification to secure the insert; this simple torque interface supports efficient changeovers and consistent clamping forces, helping to maintain cutting stability and minimise rework. Secure shank connection and workshop integration A 22 mm shank diameter provides a precise fit in standard tool posts and collets, while the unit’s modest mass of 0.4 kg makes handling and fixture changes straightforward. The holder’s four cutting positions (noted as 4 cutting edges) permit multiple reindexes per insert, improving cost-efficiency in medium-duty turning tasks. For mixed-tool workshops, the compact design and common insert form factor simplify stock management and reduce the number of specialised holders required for different turning applications. Contact Metav Werkzeuge for tailored technical advice on integrating the Teknik Makina T840TM into production setups; call +49 2822 7131930 or email info@metav-werkzeuge.com for fast, expert support Technical data Article number: T840TM Manufacturer: Teknik Makina Product: Angle tool holder for XNEX 0806 indexable inserts Compatible insert manufacturers: SECO, WINSTAR Facts Shank diameter: 22 mm Head diameter: Ø50 mm Cutting angle: 90° Overall length: 45 mm Cutting edges: 4 Weight: 0.4 kg Special features Compatible with XNEX 0806 indexable inserts Torx screw M4x12.5 Torx key specification: T15 ECLASS: 21180902 FAQ Which insert size is supported by this holder? The holder accepts XNEX 0806 indexable inserts; insert compatibility with brands such as SECO and WINSTAR is specified for the Teknik Makina T840TM (SKU T840TM). What shank diameter is required for clamping? A 22 mm shank diameter is specified for the T840TM, ensuring a tight fit in matching tool posts and collets. How many usable cutting positions does the assembly provide? The T840TM design accommodates 4 cutting edges, allowing multiple reindexes before insert replacement is required. What fastener is used to secure the insert? Insert clamping is achieved with a M4x12.5 Torx screw; the Torx specification is T15 for consistent torque application. Is the tool suitable for facing and square-shoulder turning? Yes — the 90° cutting geometry of the T840TM is optimised for facing and square-shoulder operations where defined perpendicular cuts are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, right-hand turning solution with internal coolant and proven compatibility with DNMG 1506 indexable inserts; the combination of stable engagement and straightforward insert interchange supports consistent cycle times and reduced tool changes—order via Metav Werkzeuge or ask the consultants for application advice. Boring bar AP304TM — A40T PDUNR right-hand boring bar with internal coolant by Teknik Makina The Boring bar AP304TM is a right-hand turning tool designed for use with DNMG 1506 indexable inserts, engineered to deliver stable cutting conditions in general turning and facing operations. Right-hand boring bar with internal coolant Compatible with DNMG 1506 indexable inserts 40 mm shank, 300 mm overall length 93° cutting angle for stable engagement Consistent turning performance through compatible geometry The A40T PDUNR designation describes a tool body that is matched to standard DNMG 1506 indexable inserts, so insert seating and clamping are standardised and changeovers are predictable. By using a tool body with a defined 93° cutting angle, the engagement geometry is controlled, which reduces radial deflection and delivers repeatable dimensioning. Indexable inserts are replaceable carbide tips that allow cutting-edge renewal without regrinding; this reduces overall process costs when high volumes of parts are produced. The combination of standard insert type and robust tool geometry means cycle times can be maintained with fewer interruptions for tool maintenance. Improved cooling and chip control for longer edge life This tool is equipped for internal coolant, enabling coolant to be delivered directly to the cutting zone. Direct coolant application reduces flank and crater wear on the insert and removes heat more efficiently than external jets alone. For operations that generate elevated temperatures, through-tool cooling improves surface finish and helps maintain tool life, which supports longer uninterrupted runs on production machinery. In practice, internal coolant also assists in chip evacuation when paired with the correct insert geometry, lowering the risk of built-up edge and enhancing process stability during medium- to heavy-duty cuts. Rigidity and dimensions that support stable machining Key physical parameters—40 mm shank and 300 mm overall length—are selected to balance reach and stiffness. A thicker shank reduces vibration and offers improved resistance to bending moments compared with smaller diameters, so dimensional accuracy is more easily retained on facing and turning passes. The tool has a 55 mm cutting height which provides a solid platform for the insert pocket, while the tool weight of 1.79 kg contributes to its inertial stability in the chuck or tool post. These design choices are geared towards minimising chatter and ensuring that the cutting edge engages predictably under typical lathe feed and speed conditions. Practical workshop integration and application notes The AP304TM suits routine turning tasks where DNMG-type carbide inserts are already in use, enabling toolholders to be standardised across a machine park. Right-hand cut direction is indicated for conventional turning operations on lathes set up for right-hand tool feed. Technical advice and compatibility checks are available on request; technical data such as shank diameter, cutting height and coolant provision should be verified against the machine tool’s turret or holder specification before mounting. For workshop planners seeking dependable interchangeability and straightforward maintenance, the combination of standard insert format and through-tool cooling simplifies inventory and reduces downtime. Contact Metav Werkzeuge today to discuss how the AP304TM with internal coolant and DNMG 1506 compatibility can improve turning consistency; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: AP304TM Manufacturer: Teknik Makina ISO designation: A40T PDUNR Suitable for inserts: DNMG 1506 Facts Shank diameter: 40 mm Cutting height: 55 mm Overall length: 300 mm Tool diameter: 50 mm Cutting angle: 93° Weight: 1.79 kg Special features Right-hand cutting direction Internal coolant (through-tool cooling) PDUN geometry for DNMG indexable inserts Solid tool body for stable clamping FAQ What insert type does this boring bar accept? The AP304TM is designed for DNMG 1506 indexable inserts and uses the PDUN seating geometry for secure clamping. Is the coolant supplied internally or externally? Internal coolant is provided; the bar is configured for through-tool cooling to deliver coolant directly to the cutting edge. What is the shank diameter and overall length? Shank diameter is 40 mm and overall length is 300 mm, dimensions chosen to balance reach with rigidity. Can the tool be used for finishing as well as roughing? Yes, with the correct DNMG insert grade and cutting parameters the AP304TM can be applied to both finishing and roughing tasks, benefiting from stable engagement and coolant support. Which cutting direction is specified for this tool? The tool is configured for right-hand cutting direction, suitable for standard lathe setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid 40 mm shank and internal coolant to improve cycle stability and tool life. The integrated design for CNMG 1204 indexable inserts delivers consistent chip control and repeatable bore quality — order directly via Metav Werkzeuge or consult the team for application-specific setup. A40T PCLNL Boring Bar – PCLN for CNMG Indexable Inserts, 40 mm Shank – Teknik Makina The A40T PCLNL is a left-hand boring bar engineered for turning applications with CNMG 1204 indexable inserts, combining a robust 40 mm shank with internal coolant for improved process reliability. A40T PCLNL boring bar for CNMG 1204 inserts Internal coolant supply for optimised chip evacuation 40 mm solid shank, 300 mm overall length Left-hand orientation with 95° cutting angle Stable bore quality from a rigid shank and precise geometry A solid 40 mm shank and the specified 300 mm overall length provide a balance between reach and stiffness, minimising vibration during heavy cuts. The tool’s geometry — a 95° cutting angle and generous 55 mm cutting height — supports consistent edge engagement when used with CNMG 1204 indexable inserts. In practice, this reduces surface irregularities and rework, enabling more predictable process planning in serial production and toolroom environments. Controlled cooling and chip evacuation to extend tool life The integrated internal coolant channels target the cutting zone directly, enhancing heat removal and aiding chip breakage. Improved cooling stabilises cutting temperatures, which in turn preserves insert edge integrity and delays wear. For operations requiring extended tool life and fewer tool changes, the internal coolant capability contributes to reduced downtime and a more economical machining cycle. Compatibility and quick installation for efficient setups Designed for CNMG-type indexable inserts, the holder matches common clamping systems and is identified by ISO designation A40T PCLNL. The clamping-holder designation (12) supports secure insert retention and repeatable indexability. The bar’s specification and weight (1.82 kg) facilitate straightforward handling during setup while ensuring sufficient mass for steady machining. This makes the component suitable for medium to heavy turning tasks where reliable clamping and coolant supply are required. Practical advantages for production environments By pairing proven insert geometry with targeted coolant delivery and a robust shank, the assembly improves process stability and reduces the frequency of corrective machining. The left-hand orientation is advantageous where component clamping or machine tool configuration demands reverse cutting direction. Overall, the design prioritises manufacturability and repeatable performance for workshops and production lines using CNMG inserts. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina A40T PCLNL boring bar into existing tooling arrays or to request application-specific recommendations; Metav’s specialists will support selection and setup from Emmerich. Technical Data Article number: AP354TM Manufacturer: Teknik Makina ISO designation: A40T PCLNL Facts Shank diameter: 40 mm Cutting height: 55 mm Weight: 1.82 kg Overall length: 300 mm Diameter: 50 mm Cutting angle: 95° Compatible inserts: CNMG 1204 Direction of cut: left Special features Internal coolant With coolant / mit Innenkühlung For CNMG indexable inserts (PCLN) Clamping holder designation: 12 FAQ Which insert type fits this boring bar? The A40T PCLNL is specified for CNMG 1204 indexable inserts and is optimised for those insert geometries. Is coolant supplied internally or externally? This boring bar provides internal coolant, delivering fluid directly to the cutting zone for improved cooling and chip control. What shank diameter and length are available for this model? The product has a 40 mm shank and a 300 mm overall length, offering a balance of stiffness and reach for many turning tasks. Is the cutting direction left-hand or right-hand? The holder is a left-hand orientation with a 95° cutting angle, suitable where reverse-direction cutting is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust performance and reduced setup time result from the 40 mm shank and 60 mm cutting height, delivering stable clamping and the capacity for deeper cuts; compatibility with TNMG 2204 indexable inserts simplifies tooling logistics. Order the MTUN for TNMG Indexable Inserts directly via Metav Werkzeuge or ask our consultants for application support. MTUN for TNMG Indexable Inserts – Boring bar S40T MTUNR (Ø50, 300 mm) by Teknik Makina The MTUN for TNMG Indexable Inserts is a right-hand boring bar for external turning, engineered for secure TNMG 2204 insert seating and medium‑duty CNC applications 40 mm shank for stable clamping Compatible with TNMG 2204 inserts 60 mm cutting height for deep overhangs Right-hand cutting, 93° cutting angle Greater rigidity for consistent turning accuracy The combination of a 40 mm shank and a 50 mm diameter body gives the toolholder elevated torsional stiffness, which reduces vibration during cutting and extends insert life. With an overall length of 300 mm and a mass of 2.814 kg, the construction balances reach with stability, enabling reliable external turning on standard CNC lathes. The S40T MTUNR ISO designation ensures compatibility with common toolholders and simplifies procurement and replacement cycles. Faster set-ups and optimised chip control Designed for TNMG 2204 indexable inserts, the MTUN configuration secures inserts with consistent clamping force, shortening insert changes and set-up time. The 93° cutting angle delivers clearance for effective chip evacuation and helps to avoid rubbing on interrupted surfaces, so finishing passes remain predictable. This focus on insert compatibility and chip flow supports higher productivity and reduces scrap rates in batch production. Practical fit for workshop workflows The right-hand feed and defined cutting geometry make the boring bar suitable for conventional turning operations and many CNC turning programmes. The 60 mm cutting height allows larger overhangs without immediate loss of rigidity, useful for components with stepped diameters. With a clamping holder designation of 22 and the standard ISO shank format, integration with existing fixtures is straightforward, helping to centralise tooling and lower the number of special holders required. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools MTUN boring bars and to arrange delivery from Emmerich — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: K452TM Manufacturer: Teknik Makina ISO designation: S40T MTUNR Facts Diameter: 50 mm Overall length: 300 mm Shank diameter: 40 mm Cutting height: 60 mm Weight: 2.814 kg Cutting angle: 93° Cutting direction: Right-hand Special features For TNMG 2204 indexable inserts MTUN configuration for secure insert seating Clamping holder designation: 22 Suitable for external turning and medium‑duty CNC work FAQ Which indexable inserts fit this boring bar? The MTUN for TNMG Indexable Inserts is designed for TNMG 2204 inserts, offering reliable clamping and straightforward insert replacement for series production. What are the key dimensions to consider when selecting a holder? Key dimensions are the 40 mm shank diameter, 50 mm body diameter and the 300 mm overall length; the S40T MTUNR designation also guides compatibility with standard toolholders. Is the cutting direction right-hand or left-hand? This tool is configured for right-hand cutting and features a 93° cutting angle to support effective chip evacuation during right-hand turning. How does the 60 mm cutting height benefit machining tasks? The 60 mm cutting height increases the effective cutting envelope and permits deeper overhangs while maintaining reasonable rigidity for medium‑duty turning operations. What does S40T MTUNR indicate for mounting and use? S40T MTUNR is the ISO-style shank and configuration code that identifies the shank size and MTUN insert arrangement, simplifying integration with compatible holders and machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise indexable-insert compatibility, robust 40 mm shank stability and a 300 mm overall length for reliable internal turning operations — order via Metav Werkzeuge or consult the advisors for tailored application support. K539TM Boring bar — MTWN for TNMG indexable inserts, left-hand, 40 mm shank (Teknik Makina) K539TM is a left-hand MTWN boring bar engineered for internal turning with TNMG 1604 indexable inserts, optimised for stable metal removal in workshop and CNC lathe environments. Left-hand cutting for reverse operations Compatible with TNMG 1604 inserts 40 mm shank, 300 mm overall length Precision compatibility that reduces set-up time The MTWN configuration with support for TNMG 1604 indexable inserts keeps clamping and indexation straightforward, enabling a repeatable tool set-up across multiple machines. This standardised insert interface simplifies inventory and reduces downtime when changing tools. The integrated ISO designation S40T MTQNL indicates conventional shank and seat geometry, which translates into a reliable fit with common toolholders and predictable cutting behaviour. Stable shank and mass for consistent surface finishes A 40 mm shank combined with a 50 mm outer diameter and a mass of 2.807 kg provides the rigidity needed to resist deflection during internal turning, especially on long overhangs. Greater stability reduces vibration and improves surface finish, which can extend the life of indexable inserts and lower overall machining costs. The robust construction is particularly beneficial when facing interrupted cuts or harder workpiece materials that demand a steady cutting platform. Cutting angle and geometry tailored for effective chip control The 107.5° cutting angle contributes to effective chip flow and clearance within confined bores. This geometry balances cutting forces and tool engagement so that chip evacuation is improved and insert wear is more uniform. For workshops unfamiliar with cutting-angle nomenclature: a larger approach angle like this typically reduces radial force and helps maintain tool life while preserving dimensional accuracy on the machined bore. Workshop integration and serviceability that save time With an overall length of 300 mm and clamping interface noted as size 16, the bar integrates with many conventional clamping systems and shortens changeover routines. The use of widely available TNMG 1604 inserts means replacement cutters are easy to source, allowing quick turnarounds without custom grinding. This practical compatibility supports continuous production and keeps toolroom complexity to a minimum. For precision internal turning with Teknik Makina quality, contact Metav Werkzeuge for product availability and application advice from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K539TM Manufacturer: Teknik Makina Designation: MTWN for TNMG Indexable Inserts ISO designation: S40T MTQNL Facts Shank diameter: 40 mm Outer diameter: 50 mm Cutting height: 60 mm Overall length: 300 mm Weight: 2.807 kg Cutting angle: 107.5° Compatible inserts: TNMG 1604 Special features Left-hand cutting direction MTWN holder geometry for indexable inserts Clamping holder size: 16 Suitable for standard toolholders and CNC lathe use FAQ Which inserts fit this boring bar? The K539TM boring bar accepts TNMG 1604 indexable inserts; the MTWN holder geometry is designed to secure those insert sizes reliably. Is the tool suitable for internal turning of steel components? Yes, the MTWN design of the K539TM combined with a rigid 40 mm shank provides the stability required for internal turning operations in a variety of steels. What is the cutting direction and why does it matter? This bar is configured for left-hand cutting; that orientation is selected to match the lathe's rotation and the intended machining strategy for reverse or specific clamping setups. How long is the bar and what shank size should the toolholder accept? The tool has an overall length of 300 mm and a shank diameter of 40 mm, so a compatible toolholder that accepts a 40 mm shank is required. Does the cutting angle support good chip evacuation? The 107.5° cutting angle is aimed at improved chip control and reduced radial forces, helping to maintain consistent finishing and prolong insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigidity from the 40 mm shaft, internal coolant and compatibility with CNMG 1204 inserts for precise, stable turning operations; order directly via Metav Werkzeuge or consult our specialists if guidance is required. Boring Bar AP344TM — PCLN for CNMG indexable inserts, internal coolant (Teknik Makina) The Boring Bar AP344TM is a right-hand turning bar designed for heavy-duty and precision facing with CNMG 1204 indexable inserts, suited to demanding workshop and production environments. A40T PCLNR ISO designation Internal coolant channel for stable cutting Compatible with CNMG 1204 inserts 40 mm shaft for increased rigidity Maximised rigidity for consistent machining results The turning tool is built around a 40 mm shaft, which significantly increases rigidity and reduces deflection under load. This construction, combined with the A40T PCLNR ISO form, delivers a stable platform for roughing and finishing operations, so that the machining process produces repeatable diameters and surface quality. The robust design minimises chatter and supports longer tool life of the indexable inserts, translating into fewer tool changes and more productive machine time. Integrated coolant for improved tool life and edge stability An internal coolant channel is integrated into the bar to deliver cutting fluid directly to the cutting zone. The internal coolant supply controls temperature at the edge, reduces built-up edge and assists chip control when using CNMG 1204 inserts. In practice, this means improved insert life and more consistent cutting forces, particularly during medium to heavy cuts. Explaining the technical effect: coolant at the rake reduces thermal shock and carries away chips, which helps preserve the sharpness and geometry of the cutting edge. Ready-to-fit compatibility and straightforward setup Designed for indexable turning, the bar accepts CNMG 1204 inserts in a PCLN configuration, making it straightforward to integrate into existing toolholders and setups. The right-hand cut orientation and the standard clamping interface simplify repeatable mounting and alignment. With a 300 mm overall length and a 55 mm cutting height, the tool is dimensioned to suit standard lathes and turret setups while keeping the centre of gravity and overhang balanced for better dynamic behaviour. Shop-floor reliability and measurable benefits Performance is backed by measurable specifications such as a 95° cutting angle and a compact mass of 1.82 kg, contributing to controlled cutting dynamics and manageable handling during changeover. The combination of precision geometry, coolant support and a sturdy shaft reduces scrap rates and improves first-pass yield. For procurement and planning, the tool represents a practical investment where predictable process capability and reduced downtime are priorities. For ordering or technical consultation regarding the Teknik Makina AP344TM boring bar, contact Metav Werkzeuge for assistance and delivery from the Emmerich quality hub. Technical Data Article number: AP344TM Manufacturer: Teknik Makina ISO designation: A40T PCLNR Insert type: PCLN for CNMG indexable inserts Cutting direction: right Special feature: with Coolant Facts Shaft diameter: 40 mm Overall length: 300 mm Cutting height: 55 mm Weight: 1.82 kg Diameter: 50 mm Cutting angle: 95° Special features Internal coolant (through-tool coolant) Compatible with CNMG 1204 inserts Right-hand cutting orientation ISO A40T PCLNR form FAQ What inserts fit this boring bar? The boring bar accepts CNMG 1204 indexable inserts in a PCLN arrangement; the AP344TM is specified for this insert size and geometry. Does the bar supply coolant to the cutting edge? Yes, the AP344TM features an internal coolant channel that delivers fluid directly to the insert cutting zone for improved tool life. What are the key dimensions to check before ordering? Check the shaft diameter (40 mm), overall length (300 mm) and cutting height (55 mm) to ensure compatibility with the machine turret and clearance. Is this a right- or left-hand tool? This model is a right-hand turning bar, suitable for conventional right-hand turning operations. Who manufactures the tool and who is responsible for distribution? Teknik Makina is named as the manufacturer and the product is distributed via Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 40 mm shaft and internal coolant for stable turning, together with compatibility for DNMG 1506 indexable inserts to keep cycles consistent. Order the tool directly via Metav Werkzeuge or ask the consultants for specification support. AP314TM Boring bar — PDUN for DNMG indexable inserts, internal coolant, left-hand A AP314TM boring bar designed for turning with DNMG indexable inserts, offering left-hand cutting orientation and integrated coolant for controlled chip evacuation. Internal coolant for controlled chip flow Compatible with DNMG 1506 indexable inserts Left-hand cutting for specific lathe set-ups Robust 40 mm shaft reduces deflection Precision and rigidity for consistent turning results The design combines a 40 mm shaft with a 300 mm overall length to deliver improved stiffness and repeatability in external turning operations. Reduced bending and vibration are achieved by the larger shaft diameter, which helps maintain tolerances across longer passes; this results in fewer rejects and more predictable finish quality. The tool is identified by the ISO designation A40T PDUNL, a standard reference that ensures correct selection and interchangeability in production environments. Controlled chip flow and improved surface finish Integrated internal coolant directs cutting fluid to the insert seat and cutting edge, lowering thermal load and assisting chip evacuation. With a cutting angle 93° and a 55 mm cutting height, the geometry supports stable engagement with DNMG 1506 indexable inserts, improving surface integrity and tool life. Internal coolant reduces the risk of built-up edge and enables higher sustained cutting parameters, so machining cycles can be optimised without compromising component quality. Workshop-ready design that supports steady production The bar is specified for indexable turning with the PDUN geometry and is supplied with the technical attributes that fit industrial toolrooms: for DNMG 1506 indexable inserts, left-hand cutting orientation and a compact weight of 1.79 kg for straightforward handling. The nominal diameter is 50 mm, while the shaft and mounting details follow the A40T standard, simplifying integration with compatible toolholders (clamp designation: 15). Choice of a standardised ISO type and clear compatibility reduces downtime when inserts are changed and supports reliable supply chains in series production. For a robust left-hand boring solution with internal coolant, order the AP314TM from Teknik Cutting Tools via Metav Werkzeuge for rapid delivery from Emmerich; for technical advice contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: AP314TM Manufacturer: Teknik Makina Description: PDUN for DNMG Indexable Inserts ISO designation: A40T PDUNL Cutting direction: left For inserts: DNMG 1506 Internal coolant: yes Key dimensions and weights Shaft diameter: 40 mm Cutting height: 55 mm Overall length: 300 mm Nominal diameter: 50 mm Weight: 1.79 kg Cutting angle: 93° Features & compatibility For DNMG 1506 indexable inserts Left-hand cutting Internal coolant channel ISO A40T PDUNL PDUN geometry for indexable turning Clamp designation: 15 FAQ What insert type fits this boring bar? The AP314TM is designed for DNMG 1506 indexable inserts and accepts the PDUN insert geometry specified in the technical data. Is the coolant internal or external? This boring bar features internal coolant, which is delivered through the bar to the insert seat to aid cooling and chip evacuation. Can the bar be used for right-hand turning? The AP314TM is manufactured for left-hand cutting; right-hand operations require the corresponding right-hand variant. What is the ISO designation and why is it relevant? The ISO designation A40T PDUNL identifies the bar’s shank and head geometry, simplifying matching with compatible toolholders and ensuring correct installation in production settings. Is the A40T shank compatible with standard holders? The A40T PDUNL profile is a commonly used shank form and is compatible with holders designed for A40T shanks; verify clamping details (clamp designation: 15) against the holder specification before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 40 mm shaft rigidity, internal coolant and compatibility with WNMG 0804 inserts for stable, reproducible turning operations; order the tool via Metav Werkzeuge or consult the specialists for application advice. A40T PWLNL Boring Bar — 40 mm shaft, internal coolant (Teknik Makina) A40T PWLNL Boring Bar for left‑hand turning, designed to accept PWLN holders for WNMG 0804 indexable inserts and to deliver stable chip control across medium and long overhangs. 40 mm shaft diameter for stable clamping Internal coolant for improved chip evacuation Compatible with WNMG 0804 indexable inserts 300 mm overall length for extended reach Increased process stability through a rigid build The A40T PWLNL is engineered for demanding turning tasks where vibration and chatter reduce surface quality and tool life. A 40 mm shaft provides a solid interface to the turret or toolpost, improving stability under radial cutting forces and enabling consistent tool engagement. The substantial mass and form reduce deflection during both roughing and finishing passes, which translates into fewer re‑works, improved tolerances and longer insert life. This focus on mechanical stiffness supports predictable cycle times and repeatable part quality. Better cooling and chip management for uninterrupted production An integrated internal coolant channel delivers coolant directly to the cutting edge, enhancing heat dissipation and aiding chip evacuation from the cut. Combined with the 95° cutting angle and the geometry suited to WNMG 0804 inserts, this arrangement reduces built‑up edge and thermal wear, allowing higher sustained cutting parameters on a range of ferrous and non‑ferrous components. Reliable coolant supply also helps achieve a better surface finish and reduces the likelihood of insert edge damage during longer turnings. Smooth integration with existing toolsets and quick setup The bar follows ISO‑style designation A40T PWLNL, making it straightforward to identify and match with existing indexable insert families and PWLN holders. With a 60 mm cutting height and an overall length of 300 mm, the tool balances reach and rigidity for through‑tool applications. At 2.8 kg, it is sufficiently robust for secure clamping while still manageable during tool changes. Compatibility with standard WNMG 0804 inserts streamlines tool inventory and minimises setup iterations, supporting faster changeovers and reduced machine downtime. For robust left‑hand turning with internal coolant, contact Metav Werkzeuge for tailored technical advice and reliable dispatch from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: AP374TM Manufacturer: Teknik Makina ISO designation: A40T PWLNL For inserts: WNMG 0804 Facts Shaft diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting height: 60 mm Weight: 2.8 kg Cutting angle: 95° Cutting direction: left Special features Internal coolant Compatible with PWLN holders for WNMG inserts Left‑hand orientation ISO‑style clamping FAQ Is this boring bar compatible with standard WNMG 0804 inserts? Yes. The bar is configured for PWLN holders and is compatible with WNMG 0804 indexable inserts, allowing the use of widely available turning grades and geometries. Can the tool be used for through‑tool coolant applications? The bar includes internal coolant and is intended to supply coolant near the cutting zone to improve chip control and thermal management. Which machines are suitable for this bar? Stable turrets and toolposts that accept a 40 mm shaft and provide secure clamping are suitable; the design targets conventional CNC lathes and turning centres requiring left‑hand cutting tools. Does the left‑hand orientation affect insert selection? Insert geometry remains the same, but holders and seatings must match a left‑hand toolholder configuration; the product is supplied for left‑hand cutting as specified by the ISO designation. What are the key dimensions to check before ordering? Refer to shaft diameter 40 mm, overall length 300 mm, cutting height 60 mm, and nominal bar diameter 50 mm to ensure compatibility with the machine and holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust left‑hand design combined with precise geometry and broad insert compatibility for reliable turning operations; the solid Ø50 mm body with shaft Ø40 mm and length 300 mm delivers stable cuts while accepting WN-- 0804 indexable inserts. Order via Metav Werkzeuge or consult the technical team for application advice. S40T DWLNL Boring Bar – Left‑hand DWLN Holder for WN-- 0804 Inserts (Teknik Cutting Tools) S40T DWLNL is a left‑hand boring bar engineered for external turning with DWLN‑style indexable inserts, optimised for medium to heavy machining tasks Left‑hand cutting direction for reverse operations Compatible with WN-- 0804 indexable inserts Solid Ø50 mm body with shaft Ø40 mm 300 mm overall length for extended reach Increased machining stability and consistent cycle times The Holder is designed to improve process stability through a rigid body and defined geometry. With a shaft Ø40 mm and solid Ø50 mm diameter, the design reduces chatter and deflection, which directly supports repeatable part quality and shorter setup times. The construction benefits tool life and tool change intervals by ensuring secure clamping and a stable cutting position; this translates into measurable productivity gains on batch runs and serial production. Precise insert interface for predictable cutting performance Featuring the DWLN interface for indexable inserts, the tool accepts WN-- 0804 plates and presents a controlled 95° cutting angle for reliable chip formation and surface finish. The S40T DWLNL designation denotes the holder geometry and clamping standard used in many CNC turning setups; this simplifies replacement and integration into existing toolholders. Clear insert compatibility reduces procurement complexity and helps standardise tooling across similar turning applications. Workshop integration, serviceability and practical handling At 300 mm overall length and a mass of 2.82 kg, the tool balances reach with manageable handling during mounting and changeover. The 60 mm insert seat height supports heavy engagement depths where required, while the left‑hand cutting orientation enables operations on workpieces and fixtures that demand reverse cutting vectors. For specific machining strategies or material pairings, Metav Werkzeuge offers application support and can advise on optimal insert grades and cutting data. For application support or to request a tailored recommendation for left‑hand turning tasks, contact Metav Werkzeuge and quote SKU K504TM — the Metav team will advise on tooling integration, suitable inserts and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: K504TM Brand: Teknik Makina Type: Bohrstange (boring bar) ISO designation: S40T DWLNL Key dimensions Diameter: 50 mm Shaft diameter: 40 mm Overall length: 300 mm Insert seat height: 60 mm Weight: 2.82 kg Materials & features Compatible inserts: WN-- 0804 Cutting direction: left‑hand Cutting angle: 95° Clamping holder code: 08 Description (EN): DWLN for WN-- Indexable Inserts FAQ What inserts fit this boring bar? The boring bar is configured for WN-- 0804 indexable inserts using the DWLN interface; this ensures a straightforward insert change and predictable seating for consistent cutting. Is the bar suitable for heavy cutting depths? The solid Ø50 mm body and shaft Ø40 mm provide rigidity for medium‑to‑heavy engagement; the 95° cutting angle and 60 mm seat height support stable chip control under higher metal removal rates. Can the left‑hand orientation be used on standard lathes? Yes — left‑hand cutting is used for reverse‑direction operations and is compatible with standard lathes when the machining strategy or workholding requires a left‑hand turning tool. Which SKU should be referenced when enquiring? Please reference SKU K504TM and the S40T DWLNL designation when requesting technical details, inserts or ordering information to ensure correct identification. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com