Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of robust clamping, compatibility with DC-- 11T3 indexable inserts and a compact overall length for stable, efficient turning; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. S40T SDQCR boring bar — Ø50 mm cutting diameter, 300 mm overall length (Teknik Makina) The S40T SDQCR boring bar is a right‑hand, indexable‑turning toolholder engineered for precision internal and external turning with DC-- 11T3 indexable inserts in CNC and manual lathe operations. ISO designation S40T SDQCR Compatible with DC-- 11T3 inserts Right‑hand cutting geometry 107.5° Robust shaft Ø40 mm for secure clamping Stable turning through rigid design The toolholder is built to prioritise cutting stability and repeatability in series production. With a shaft Ø40 mm and a compact mass of 0.268 kg, the assembly reduces vibration and improves surface finish when compared with weaker holders; this leads to fewer reworks and a more consistent process. The specified cutting angle 107.5° supports predictable chip flow and cutting forces, which is especially valuable during deeper passes or when machining challenging materials. For teams needing reliable cycle times, the mechanical setup of the bar contributes directly to process stability and reduced scrap. Fast integration using standard indexable inserts Compatibility with DC-- 11T3 indexable inserts keeps tooling logistics simple and minimises changeover time. Because the bar accepts a standard insert form, stock levels are easier to manage and tool changes are straightforward, lowering machine downtime. The right‑hand cutting orientation with the SDQC geometry ensures correct tool engagement for common turning operations while the Ø50 mm cutting diameter and 300 mm overall length balance reach with rigidity. For workshops introducing new tooling to existing programmes, this compatibility reduces training effort and speeds up implementation. Practical benefits for workshop efficiency The boring bar is particularly suited to tasks where a combination of reach and rigidity is required: internal bore refinement, facing to datum and precise OD finishing. The indexable inserts strategy means only the small carbide plates need replacement, which cuts long‑term operating costs and simplifies inventory. The ISO designation and clear technical dimensions support accurate tool management and make the component straightforward to list in maintenance schedules. For procurement, the compact weight and standard clamping interfaces mean fewer spindle/load constraints and easy handling at the machine. For a reliable upgrade to existing turning operations, request availability and technical guidance from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for delivery details and suitability advice. Technical data Article number: K154TM Manufacturer: Teknik Makina Product name: SDQC for DC-- Indexable Inserts Facts ISO designation: S40T SDQCR Cutting direction: right Shaft diameter: 40 mm Cutting diameter: 50 mm Cutting height: 50 mm Overall length: 300 mm Cutting angle: 107.5° Weight: 0.268 kg Special features Compatible inserts: DC-- 11T3 Clamping holder designation: 11 Files available: 2 (IDs: 62de7ecaa9cff922f4703d43; 62de7e24bd24461b3d5f7a0f) FAQ Which inserts fit this boring bar? The S40T SDQCR accepts DC-- 11T3 indexable inserts; this compatibility ensures standard insert sizes can be used for easy replacement and stock management. Is the cutting direction right or left? This toolholder is manufactured for right‑hand cutting, suitable for conventional right‑hand turning setups on CNC lathes. What are the key dimensions to check before fitting? Check the shaft diameter 40 mm, cutting diameter 50 mm and overall length 300 mm to ensure compatibility with the machine turret and the required reach. Can the bar be used for both internal and external turning? Yes, the design and indexable inserts compatibility make it adaptable for internal boring and external finishing where reach and rigidity are required. What is the SKU and who manufactures the tool? The SKU is K154TM, manufactured by Teknik Makina and distributed via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable system that combines stable cutting geometry and quick set-up: the S40T SDXCR boring bar offers a 50 mm cutting diameter with a 120° cutting angle and compatibility with DC-- 11T3 inserts, enabling efficient external boring cycles with predictable results. Order through Metav Werkzeuge or consult their specialists for integration into production. S40T SDXCR boring bar — 50 mm diameter, for DC-- 11T3 indexable inserts (Teknik Cutting Tools) A S40T SDXCR boring bar designed for right-hand turning operations, intended to accept DC-- 11T3 indexable inserts for reliable external boring and finishing on CNC lathes Compatible with DC-- 11T3 inserts 50 mm cutting diameter 300 mm overall length Right-hand cutting, 120° angle Stable cutting geometry that improves surface quality The S40T SDXCR is engineered for precision in external boring by pairing a substantial 50 mm cutting diameter with a wide 120° cutting angle. This geometry reduces radial forces and helps to maintain tool stability during finishing passes, which in turn lowers vibration and improves surface finish. Using a standard indexable insert format such as DC-- 11T3 keeps replacement simple and economical; insert changes are faster than regrinding monolithic tools, offering a pragmatic route to lower per-part tooling costs without compromising on accuracy. Quick clamping and predictable repeatability for series production With a 40 mm shank diameter and an overall length of 300 mm, the bar is balanced for secure clamping and repeatable set-ups. The specified cutting height of 55 mm and a compact mass of 0.268 kg reduce spindle load and make off-axis loading more manageable on medium and high-rigidity turrets. The bar’s clamp designation (11) supports standard holder interfaces, which simplifies toolpost inventory and ensures fast, repeatable mounting — an advantage when short changeover times are critical to throughput. Practical integration into CNC turning workflows This boring tool is intended primarily for external boring and finishing cycles on CNC lathes where a right-hand cut is standard. The indexable configuration supports both roughing and finishing by allowing users to select suitable insert grades for workpiece material and cutting conditions. The modular approach reduces downtime: worn inserts are replaced quickly while the bar remains in position, maintaining axial alignment and minimising reset time. For production planners and workshop managers seeking a reliable, compact solution, the indexable boring bar offers an efficient blend of serviceability and consistent performance. Contact Metav Werkzeuge for tailored advice on integrating the S40T SDXCR into existing tool inventories and to check current availability and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K475TM ISO designation: S40T SDXCR Compatible inserts: DC-- 11T3 Cutting direction: Right Clamp designation: 11 Facts Diameter: 50 mm Shank diameter: 40 mm Overall length: 300 mm Cutting height: 55 mm Cutting angle: 120° Weight: 0.268 kg Special features Intended for indexable inserts Right-hand turning geometry Compact, lightweight design Suitable for standard turret/clamp systems FAQ Which inserts are compatible with this boring bar? The S40T SDXCR is designed to accept DC-- 11T3 indexable inserts for standard external boring tasks. Is the bar suitable for CNC lathes and turret holders? Yes. The tool’s 40 mm shank and clamp designation 11 make it compatible with common turret clamping systems used on CNC lathes. What is the overall length and effective reach of the tool? The bar measures 300 mm overall, providing a balanced reach for many external boring applications while maintaining rigidity. Which cutting direction and angle does the tool use? The boring bar is configured for right-hand cutting with a 120° cutting angle, optimised for conventional external turning setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable 40 mm shaft, VBMT 1604 insert compatibility and a 300 mm overall length for reliable left‑hand turning operations; order directly via Metav Werkzeuge or consult the technical team for seamless integration into production. S40T SVQBL Boring Bar — SVQB for VBMT Indexable Inserts, left‑hand, 40 mm shaft (Teknik Makina) S40T SVQBL is a left‑hand boring bar designed for indexable turning with VBMT 1604 inserts, offering a rigid 40 mm shaft and a 300 mm overall length for stable machining Left‑hand cutting direction for specific turning tasks 40 mm shaft diameter for high rigidity Designed for VBMT 1604 indexable inserts 300 mm overall length for extended reach Built for steady, accurate left‑hand turning The S40T SVQBL boring bar combines a 40 mm shaft with a 55 mm cutting height to reduce vibration and maintain a consistent tool‑edge engagement during left‑hand operations. The bar’s mass and geometry deliver improved stability, which translates into repeatable bore quality and fewer reworks. Compatibility with VBMT 1604 inserts ensures a broad selection of grades and chipbreakers, allowing process engineers to select the optimum insert for material and finish requirements. Simple integration and process benefits for workshop productivity With an ISO designation that corresponds to established toolholder standards and a 300 mm overall length, this holder fits conventional and CNC lathes where extended reach is required without sacrificing rigidity. The effective cutting angle of 107.5° improves insert clearance and chip flow, reducing cutting forces in many turning applications. Minimal changeover is possible because the holder accepts common VBMT 1604 inserts, supporting efficient tool management and predictable cycle times on turning centres. Practical specification highlights that reduce set‑up risk Key mechanical details — including a shaft diameter of 40 mm, diameter 50 mm body dimension and a weight of 2.765 kg — assist planners in spindle load assessments and balancing for high‑precision setups. The clamping interface marked as 16 provides secure insert retention during interrupted cuts. These measurable parameters make it straightforward to calculate safe cutting data and to harmonise the holder with existing tool posts and turrets, lowering the chance of incompatibility at first use. Choose Teknik Makina’s S40T SVQBL for dependable left‑hand turning — contact Metav Werkzeuge for ordering and application guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K318TM ISO designation: S40T SVQBL Product designation: SVQB for VBMT Indexable Inserts Brand: Teknik Makina ECLASS: 21180806 Core specifications Shaft diameter: 40 mm Cutting height: 55 mm Overall length: 300 mm Weight: 2.765 kg Body diameter: 50 mm Cutting angle: 107.5° Applications & features For indexable inserts VBMT 1604 Left‑hand cutting direction Clamping size: 16 Designed for turning/boring operations ISO toolholder format S40T SVQBL FAQ Which indexable inserts are compatible with this holder? The holder is specified for VBMT 1604 inserts; SVQB for VBMT Indexable Inserts (Teknik Makina, SKU K318TM) accepts that insert size and related grades. Is the bar suitable for left‑hand turning only? Yes, the toolholder is configured with a left‑hand cutting direction, intended for left‑hand turning applications and corresponding turret orientations. What are the key dimensions to check for machine compatibility? Essential dimensions include the 40 mm shaft diameter, 300 mm overall length and the 55 mm cutting height; these values help determine clearance and clamping compatibility with the lathe or turret. Can the toolholder be used on CNC turning centres with extended overhangs? The 300 mm overall length provides extra reach for medium overhangs, though final suitability depends on machine spindle and setup; use the supplied dimensions for rigidity and spindle load calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a stiff S40T SVQCR shank (Ø40 mm), a 300 mm overall length and compatibility with VCMT 1604 indexable inserts ensures stable turning performance and short tool-change times; order the boring bar directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Boring Bar K225TM — S40T SVQCR for VCMT 1604, Ø40 mm shank, right-hand the Boring bar K225TM is a right-hand external turning holder designed for VCMT 1604 indexable inserts, engineered for reliable, vibration-resistant metal-cutting in general workshop and light industrial turning operations Ø40 mm shank for high stiffness Compatible with VCMT 1604 indexable inserts S40T SVQCR ISO designation for easy selection 300 mm overall length for workshop versatility Improved rigidity for consistent surface finish The Ø40 mm shank and the S40T SVQCR form factor deliver increased torsional and bending resistance compared with narrower holders, which directly reduces chatter and produces a more consistent surface finish. For operations where repeatability matters, the stiffer shaft means fewer rejects and less rework. The design also improves tool life by keeping the insert cutting edge stable under load, translating the holder’s mechanical properties into measurable productivity gains. Fast insert changes and predictable clamping accuracy Equipped for VCMT 1604 indexable inserts, the SVQC clamping interface secures the cutter with repeatable seating, enabling quick index changes and controlled positioning. The specified 107.5° cutting angle promotes favourable cutting forces for many turning tasks, lowering radial loads on the toolpost and the workpiece. This geometry supports efficient chip control and helps maintain consistent engagement, which is especially beneficial in batch production or mixed-series turning where setup time must be minimised. Workshop-ready dimensions and practical handling With a 300 mm overall length, a nominal diameter of 50 mm and a cutting height of 55 mm, the holder balances reach with rigidity for common external turning setups. The unit weight (2.767 kg) provides solid dampening without adding unnecessary inertia during manual handling. The right-hand cutting direction suits conventional lathe configurations. Together, these attributes make the holder a practical choice for machinists seeking a reliable, easy-to-integrate component for indexable-insert turning operations. For tailored application advice on the Teknik Cutting Tools K225TM boring bar — including suitability for existing toolposts and recommended cutting data — contact Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: K225TM Manufacturer: Teknik Cutting Tools Type designation: S40T SVQCR Product name: SVQC for VCMT Indexable Inserts Measurements Shank diameter: 40 mm Cutting height: 55 mm Diameter: 50 mm Overall length: 300 mm Weight: 2.767 kg Cutting angle: 107.5° Features Compatible with VCMT 1604 indexable inserts SVQC clamping for VCMT inserts Right-hand cutting direction Clamping holder size: 16 FAQ Which indexable inserts fit this holder? The holder is specified for VCMT 1604 indexable inserts; the SVQC clamping seats these inserts securely for predictable repeatability. Is the shank compatible with standard toolposts? The Ø40 mm shank and the S40T SVQCR form are compatible with many standard external toolholders and turret systems, but verification of mounting clearances is recommended before installation. What cutting direction is required? This boring bar is designed for right-hand cutting; orientation should match the lathe’s toolpost setup and machining strategy. How does the 107.5° angle affect machining? The 107.5° cutting angle produces lower radial forces and improved chip flow in many turning operations, contributing to reduced vibration and enhanced tool life. Can the holder be used for roughing and finishing? With its robust shank and secure clamping, the holder suits both roughing and finishing passes when paired with the correct grade and geometry of VCMT 1604 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid, ISO‑specified toolholder that accepts standard VBMT 1604 inserts and delivers stable, right‑hand cutting for reliable finishing; order through Metav Werkzeuge for assured supply and expert advice from Emmerich. Bohrstange K210TM — SVUB holder for VBMT indexable inserts, S40T SVUBR, 40 mm shank (Teknik Makina) The Bohrstange K210TM is a right‑hand boring bar designed to hold VBMT 1604 indexable inserts for precise external turning and light boring operations S40T SVUBR ISO designation For VBMT 1604 indexable inserts Shank diameter 40 mm for high rigidity Right‑hand cutting with 93° cutting angle Improved stability for cleaner surfaces and longer tool life The S40T‑style shank and shank diameter 40 mm provide a rigid connection between machine spindle and cutting tip, reducing vibration during cutting. This increased stability leads to a more consistent surface finish and extends the life of the VBMT 1604 inserts by lowering edge wear. The ISO designation S40T SVUBR indicates a standardised holder form, which simplifies tool planning and replacement in production environments where interchangeability and repeatability are important. Secure insert seating and reliable geometry With a cutting height 50 mm and a cutting angle of 93°, the holder positions each insert precisely and maintains the intended rake and clearance geometry. The robust clamping arrangement of the SVUB design keeps the indexable plate seated under cutting forces, ensuring dimensional consistency on workpieces. The right‑hand cutting orientation is suitable for standard lathe set‑ups that follow conventional feed directions, enabling straightforward process definition and programming on CNC turning centres. Practical dimensions for easy integration in workshops At 300 mm overall length and a diameter 50 mm, this toolholder balances reach with stiffness, making it suitable for operations requiring moderate overhang without excessive deflection. The measured weight of 2.836 kg reflects a solid construction that aids dampening and handling during set‑up. The component is identified as SKU K210TM and carries the ISO name S40T SVUBR, easing procurement and stockkeeping across maintenance and production departments. For procurement or technical compatibility checks contact Metav Werkzeuge for reliable supply of the Teknik Makina SVUB SVUB boring bar and advice from our Emmerich team. Technical data Article number: K210TM Manufacturer: Teknik Makina ISO designation: S40T SVUBR For inserts: VBMT 1604 Facts Shank diameter: 40 mm Cutting height: 50 mm Diameter: 50 mm Overall length: 300 mm Cutting angle: 93° Weight: 2.836 kg Special features Right‑hand cutting direction SVUB insert holder geometry Compatible with standard VBMT indexable plates SKU K210TM Brand: Teknik Makina FAQ Which insert size fits this holder? The holder accepts VBMT 1604 indexable inserts; the seating and clamping are designed specifically for that plate geometry. What are the key dimensions for set‑up and clearance? Key values are shank diameter 40 mm, cutting height 50 mm, overall length 300 mm and a cutting angle of 93°, all specified to aid fixturing and tool‑path planning. Is this a right‑ or left‑hand tool? This toolholder is configured for right‑hand cutting and is intended for standard right‑hand turning operations. How is the product identified for ordering and stock? The item is listed as SKU K210TM and carries the ISO code S40T SVUBR for straightforward ordering and inventory matching. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of precise indexable-insert compatibility, a robust S40T SVUCR shank and a stable 40 mm diameter for reliable turning cycles; order directly via Metav Werkzeuge or consult the team for technical guidance. K215TM – SVUC boring bar for VCMT indexable inserts (S40T SVUCR, 40 mm shank) K215TM is a right-hand SVUCR boring bar designed for turning applications using VCMT 1604 indexable inserts, offering a rigid S40T shank and a 300 mm overall length for deeper or extended operations. S40T SVUCR shank design Compatible with VCMT 1604 inserts 40 mm shank, 300 mm overall length Right-hand cut, 93° approach angle Engineered compatibility for consistent insert performance The S40T SVUCR design ensures stable seating and repeatable geometry when used with VCMT 1604 indexable inserts, which reduces variability between cycles and supports consistent contour accuracy. As a standardised interface, this holder minimises time lost to adjustment and clarifies cutter selection, making tool changes faster while maintaining defined cutting geometry for predictable results. Robust shank dimensions to reduce vibration and deflection A 40 mm shank combined with a 300 mm overall length provides a calculated balance between reach and rigidity. The substantial cross-section reduces deflection in extended setups, improving edge life and surface finish. Weight and mass distribution are tuned for workshop use; the tool’s measured mass supports stable cutting dynamics and contributes to fewer rejects from chatter-related marks. Designed approach and insert integration for effective cutting The toolholder’s 93° cutting angle and right-hand cutting orientation are optimised for conventional turning strategies with VCMT inserts, enabling efficient chip formation and reliable seat contact. The SVUC geometry is engineered to accept indexable inserts without modification, so insert clamping remains straightforward and repeatable, aiding systematic setup and quality control across production batches. Operational benefits and workshop efficiency Standardisation on a recognised holder format simplifies inventory and maintenance routines: the SVUCR holder accepts stocked insert types, which shortens supply chains and reduces downtime. Clear compatibility with VCMT 1604 inserts allows focused procurement and predictable tool-life planning, supporting steady throughput and fewer unplanned stoppages. The design promotes straightforward insert replacement and secure clamping for high-repeatability turning operations. For procurement or application advice regarding the SVUC boring bar, contact Metav Werkzeuge for fast, expert guidance and reliable supply directly from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: K215TM Manufacturer: Teknik Makina Facts Shank diameter: 40 mm Cutting height: 55 mm Weight: 2.807 kg Overall length: 300 mm Diameter: 50 mm Cutting angle: 93° Special features ISO designation: S40T SVUCR Compatible inserts: VCMT 1604 Cutting direction: right Description (EN): SVUC for VCMT Indexable Inserts Clamp designation: 16 FAQ What insert type is compatible with this holder? The holder accepts VCMT 1604 indexable inserts; the SVUCR geometry is designed for direct seating of this insert type. Is the tool suitable for long-reach turning operations? With a 40 mm shank and 300 mm overall length, the tool provides extended reach while maintaining improved rigidity compared with slimmer holders. What is the ISO designation of the holder? The tool is specified as S40T SVUCR, indicating the shank and holder geometry for standard SVUCR applications. Which cutting direction is this boring bar designed for? The tool is configured for right-hand cutting and a 93° approach angle for standard turning strategies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigidity, standardised insert compatibility and reach for dependable boring results; the 50 mm diameter and 350 mm overall length deliver stable machining while compatibility with CN--1606 inserts ensures efficient tool changes — order the boring bar directly via Metav Werkzeuge or consult our specialists if clarification is required. Boring bar S40U DCLNR – DCLN for CN-- indexable inserts, 50 mm diameter (Teknik Makina) A Boring bar S40U DCLNR designed for right-hand turning applications, compatible with CN--1606 indexable inserts and specified for ISO S40U DCLNR toolholders S40U DCLNR ISO designation 50 mm diameter for high rigidity 350 mm overall length Compatible with CN--1606 indexable inserts Stable machining through increased stiffness and predictable tool behaviour The S40U DCLNR geometry offers a 50 mm diameter combined with a 40 mm shank, which increases bending stiffness and reduces vibration during cuts. This configuration helps maintain dimensional accuracy on long-reach operations where deflection is a risk. The 95° cutting angle supports stable chip flow for common turning tasks; the reduced tendency to chatter results in more consistent surface finishes and fewer reworks. The bar’s mass (approx. 3.55 kg) has been considered in the design to balance rigidity and handling without compromising toolholder integrity. Fast setup and standardised insert replacement to save production time Workflows are streamlined by the use of standard CN--1606 inserts, enabling quick, repeatable indexable insert changes and reducing machine downtime. The tool follows the ISO S40U DCLNR specification for installation into compatible toolholders, and the clamping reference 16 clarifies the intended clamp interface. Because insert replacement is straightforward, consumable costs are controlled and process reproducibility is improved. The combination of a standardised holder fit and indexable tips supports efficient maintenance cycles in high-mix production environments. Practical reach and handling for workshop integration With a 350 mm overall length, the bar provides the reach required for many internal and external boring tasks while retaining enough cross-section to limit deflection. The right-hand cutting orientation is suited to standard lathe setups and is compatible with common turning strategies. Tool life and part quality are supported by the bar’s geometry rather than by specialised coatings or materials, which means predictable behaviour across routine machining operations. The design is aimed at machinists and production engineers seeking a robust, standardised boring solution that integrates easily into existing tool inventories. For robust, standardised boring operations request detailed specifications or place an order through Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines or applications Technical Data Article number: K371TM Manufacturer: Teknik Makina ISO designation: S40U DCLNR Type: DCLN for CN-- indexable inserts Direction of cut: right Facts Diameter: 50 mm Shank diameter: 40 mm Cutting height: 60 mm Overall length: 350 mm Cutting angle: 95° Weight: 3.55 kg Compatible insert: CN--1606 Special features Clamping holder reference 16 Right-hand cutting orientation Standardised ISO toolholder fit Indexable insert compatibility for quick changes FAQ Which inserts are compatible with this boring bar? The S40U DCLNR boring bar is compatible with CN--1606 indexable inserts; Teknik Makina specifies this compatibility and the SKU K371TM identifies the exact configuration. Is the cutting direction right-hand or left-hand? This boring bar is configured for right-hand cutting, as noted in the product data and the ISO designation. What are the key dimensions for mounting and reach? Key measurements are 50 mm diameter, 40 mm shank diameter, and 350 mm overall length, which define rigidity and available reach for typical lathe setups. What ISO designation ensures standardised toolholder fit? The tool uses the ISO S40U DCLNR designation, ensuring fit with compatible standard toolholders and simplifying integration into existing tool inventories. Which clamping reference should be used with this bar? Use the clamping holder reference 16 as indicated in the technical details for the correct interface and secure fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, indexable system that combines stable shank support and CN-- 1906 insert compatibility for reproducible results in internal turning; order directly via Metav Werkzeuge or contact our technical consultants for tailored guidance. S40U DCLNR Boring Bar — DCLN for CN-- Indexable Inserts, 40 mm shank A boring bar S40U DCLNR designed for precision internal turning and grooving with CN-- 1906 indexable inserts, suited to right-hand cutting applications in CNC and turning centres ISO designation S40U DCLNR for standardised handling Compatible with CN-- 1906 indexable inserts 95° cutting angle for secure, predictable cutting 350 mm overall length with 40 mm shank stability Greater rigidity for repeatable internal turning The combination of a 40 mm shank and a 350 mm overall length provides a balance between reach and stiffness that reduces vibration and bore deviation during machining. A stiffer toolholder means fewer passes to reach tolerance, which improves throughput and reduces scrap. The 95° cutting angle is optimised to maintain insert contact under load, resulting in consistent bore geometry even on interrupted cuts. For production environments that prioritise dimensional stability, this tool delivers measurable process reliability. Indexable-insert economy and quick service turnaround Using the DCLN interface for CN-- 1906 indexable inserts simplifies inventory and tooling logistics: worn cutting edges are replaced quickly without regrinding, lowering per-hole costs and machine downtime. The boring bar accepts standard indexable inserts, enabling easy sourcing and compatibility across established carbide grades. Where varied batch materials are processed, the insert system supports fast adaptation of grades and geometries, helping to maintain cycle times and overall equipment effectiveness. Designed for controlled machining and safe handling The tool’s 60 mm cutting height and right-hand cutting configuration are specified for secure seating and repeatable clamping in compatible holders; the adapter size reference 19 (clamping holder designation) assists in selecting the correct mounting components. A mass of 3.503 kg contributes to stable tool behaviour during heavy cuts while remaining manageable for routine set-up. The boring bar’s profile and interface prioritise safe insert retention and predictable chip flow, which together reduce the likelihood of unexpected tool failure and protect the workpiece finish. Procurement confidence and workshop support from Metav Sourcing this kind of turning tool through Metav delivers more than a single purchase: it links practical tooling choices to a European quality filter and a broad product range that simplifies supply chains. Metav’s emphasis on accessible precision, a long customer track record and central logistics from Emmerich supports reliable replenishment and faster return to production. For buyers seeking measured performance gains, the combination of a standardised ISO toolholder, indexable insert compatibility and Metav’s procurement expertise provides a pragmatic route to improved machining consistency. For precise internal turning needs, request the S40U DCLNR boring bar from Metav Werkzeuge — contact Metav Werkzeuge for technical matching and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K374TM Item designation: Bohrstange Additional designation: DCLN for CN-- Indexable Inserts ISO designation: S40U DCLNR Facts Shank diameter: 40 mm Overall length: 350 mm Diameter: 50 mm Cutting height: 60 mm Weight: 3.503 kg Cutting angle: 95° Cutting direction: right Special features Compatible with CN-- 1906 indexable inserts Clamping holder reference: 19 Right-hand cutting configuration Suitable for CNC and turning centre internal boring FAQ What inserts fit this boring bar? The boring bar accepts CN-- 1906 indexable inserts via the DCLN interface; this enables rapid insert changes and use of common carbide grades. Is the S40U DCLNR suitable for heavy cuts? With a 40 mm shank and a mass of 3.503 kg, the S40U DCLNR boring bar provides the rigidity expected for moderate to heavy interrupted cuts when used with appropriate holders. Which direction of cut is this tool configured for? The tool is specified for right-hand cutting, as indicated in the technical data and suitable for standard right-hand turning operations. How does the 95° cutting angle affect bore quality? A 95° cutting angle delivers stable insert engagement, reducing deflection and promoting consistent bore geometry across repeated cycles. What mounting reference is provided for holder selection? The clamping holder reference 19 is supplied to assist in choosing the correct holder and mounting components for secure installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a left-hand cutting geometry, a 40 mm shaft for stable support and compatibility with DN--1506 indexable inserts for straightforward tooling; order the boring bar directly via Metav Werkzeuge or consult our specialists for application advice. S40U DDUNL Boring bar — 40 mm shaft, left-hand cut (Teknik Makina) S40U DDUNL is a left-hand boring bar designed for internal turning with DN--1506 indexable inserts, offering reach and rigidity for professional workshop use Left-hand cutting geometry for internal turning 40 mm shaft for enhanced stability Compatible with DN--1506 indexable inserts 350 mm overall length for extended reach Stable support and predictable cutting performance The boring bar is engineered to provide stable clamping and consistent results in internal turning operations. The combination of a 40 mm shaft and a mass of 3.336 kg reduces tool deflection and contributes to improved surface finish and repeatability. Where rigidity matters, a larger shaft diameter helps to damp vibrations, which in turn lowers the probability of chatter and extends insert life. This makes the tool suited to repeated precision tasks in small-batch production or workshop environments where predictable turning outcomes are required. Improved productivity through geometry and reach A 93° cutting angle paired with a 60 mm cutting height delivers a geometry that balances cutting forces and chip control for indexable insert tooling. The 350 mm overall length provides the reach needed for deeper bores while maintaining sufficient stiffness when used with an appropriate clamping system. As a result, cycle times can be optimised through reliable tool behaviour and fewer re‑set operations, supporting a more efficient machining process with lower overall downtime. System compatibility and mounting advantages Marked as S40U DDUNL, the tool is intended for use with DN--1506 inserts and references a clamping holder designation of 15, which informs mounting and holder selection. The left-hand cut orientation suits operations where the spindle or setup requires counterclockwise tool engagement. Clear identification of the interface to inserts simplifies tool setup and inventory management, allowing maintenance of a compact tooling assortment while ensuring interchangeability across compatible holders and indexable inserts. Workshop handling, supply reliability and integration Practical handling benefits from a robust design that tolerates routine handling without frequent adjustment. The bar’s dimensions and weight support steady machining when paired with a correctly rated holder and tightening torque. Sourcing through Metav Werkzeuge provides not only rapid dispatch from a European distribution hub but also access to a broad range of complementary tooling and spare inserts, enabling faster integration into existing machining cells. The combined offering aims to reduce procurement complexity while maintaining machining quality standards. Select the Teknik Makina S40U DDUNL boring bar for stable, left-hand internal turning and rely on Metav Werkzeuge in Emmerich for rapid supply and application matching Technical data Article number: K495TM Manufacturer: Teknik Makina ISO designation: S40U DDUNL Compatible inserts: DN-- 1506 Shaft diameter: 40 mm Cutting height: 60 mm Weight: 3.336 kg Overall length: 350 mm Diameter: 50 mm Cutting angle: 93° Cutting direction: left Clamping holder designation: 15 Designed for indexable insert use Left-hand cutting geometry Extended reach for internal turning FAQ Which inserts fit this boring bar? The bar accepts DN--1506 indexable inserts; compatibility is specified for DN--1506 inserts in the product designation. What is the ISO designation and SKU? ISO designation: S40U DDUNL. SKU: K495TM (Teknik Makina boring bar). What are the key dimensions to consider? Key dimensions: shaft diameter 40 mm, overall length 350 mm, cutting height 60 mm, nominal diameter 50 mm, weight 3.336 kg. Is the tool suitable for deep internal turning? The 350 mm overall length offers extended reach for internal turning; suitability for a specific bore depth depends on the machine setup and holder stiffness. How should the bar be clamped? Use a holder compatible with the clamping designation 15 and ensure secure, rigid support to maintain stable clamping and minimise deflection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a purpose-built S40U DDUNR boring bar that combines a 40 mm shank and a 350 mm overall length for enhanced stability and repeatable results; order the tool via Metav Werkzeuge or contact our advisors for application advice. S40U DDUNR Boring Bar – 40 mm shank, 350 mm overall length (Teknik Cutting Tools) A S40U DDUNR boring bar engineered for right-hand turning operations with DN-- 1506 indexable inserts, designed to deliver stable machining in medium to heavy-duty workshop environments 40 mm shank for secure clamping Compatible with DN-- 1506 inserts 93° cutting angle for stable control 350 mm overall length and robust mass Consistent cutting performance for precision turning The ISO-designated S40U DDUNR bar couples a 40 mm shank with a measured 93° cutting angle, which together reduce deflection and improve surface finish during off-centre or extended-reach turning. The combination of shank diameter and geometry provides a predictable tool behaviour under load, making cycle times more reliable and lowering the risk of rework. This configuration supports steady chip evacuation and stable cutting forces, resulting in fewer interruptions in production. Faster set-up through standardised insert compatibility Compatibility with DN-- 1506 indexable inserts simplifies tooling logistics and shortens changeover times. The tool’s 60 mm cutting height matches common insert sizes for this family, enabling quick, repeatable seating of the insert and consistent tool projection. For workshops managing multiple tool holders, the standardised insert format reduces the number of spare parts required and streamlines inventory, thereby improving throughput without compromising cutting performance. Robust design that integrates with existing toolholders With a 350 mm overall length and a mass of 3.336 kg, this boring bar is balanced for rigidity while allowing sufficient reach for internal and external applications where access is limited. The right-hand cutting orientation and the tool’s ISO designation ensure compatibility with standard holders and clamping systems. The combination of measured dimensions and standard fitting reduces setup uncertainty and supports consistent quality across batches. Contact Metav Werkzeuge today for tailored application advice and reliable supply from Emmerich — request the S40U DDUNR boring bar (SKU K415TM) and discuss technical details by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K415TM Designation: Bohrstange ISO designation: S40U DDUNR Type: DDUN for DN-- indexable insert Numeric specifications Shank diameter: 40 mm Cutting height: 60 mm Overall length: 350 mm Diameter: 50 mm Weight: 3.336 kg Cutting angle: 93° Cutting direction: Right Compatibility & features For indexable inserts DN-- 1506 Right-hand orientation ISO-standard tool designation Suitable for standard toolholders FAQ Which insert type fits this boring bar? The S40U DDUNR boring bar accepts DN-- 1506 indexable inserts; the tool geometry is matched to that insert family for secure seating and consistent cutting height. Is the bar suitable for extended-reach turning? The 350 mm overall length and 40 mm shank provide a balance of reach and rigidity, so the bar is appropriate for applications requiring greater access while maintaining stability. What is the cutting direction of the tool? This bar has a right-hand cutting direction; the orientation is indicated by the tool’s ISO designation and is suitable for standard right-hand turning operations. How will the weight affect machining stability? At 3.336 kg, the mass of the tool contributes to stability and vibration damping during cutting, which helps to maintain surface quality and reduce the likelihood of chatter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 40 mm shank and a 400 mm overall length to achieve stable internal turning with indexable inserts; precision geometry and robust mass reduce vibration and improve surface finish. Order directly via Metav Werkzeuge or consult our specialists if additional technical guidance is required. Boring Bar S40V CKUNR for KNUX 1604 Indexable Inserts — 40 mm shank, 400 mm overall (Teknik Makina) A robust Boring Bar S40V CKUNR designed for internal turning with KNUX 1604 indexable inserts, optimised for right-hand cutting and reliable clamping 40 mm shank for stable mounting 400 mm overall length for deep bores Compatible with KNUX 1604 indexable inserts Right-hand cutting with 93° cutting angle Higher productivity through rigidity and vibration damping The solid 40 mm shank and substantial body diameter contribute directly to stability during internal turning, which reduces chatter and allows for more consistent chip formation. With a 50 mm diameter and a mass of 3.999 kg, the toolholder provides inertial damping that supports higher metal‑removal rates while maintaining part geometry. For workshops aiming to shorten cycle times, the mechanical steadiness of this boring bar translates into fewer reworks and better first‑pass yields, so machining programmes can run at sensible feeds and depths without sacrificing surface integrity. Proven insert compatibility for predictable performance Designed around the KNUX 1604 insert family and the CKUNR holder geometry, the tool enables quick, repeatable insert changes and consistent cutting conditions. The cutting height 55 mm and 93° cutting angle are engineered to ensure correct rake and clearance for standard KNUX inserts, so chip flow and heat distribution remain controlled during right‑hand operations. For teams less familiar with insert geometries, this means straightforward tooling choices: standard KNUX 1604 inserts fit the assembly and deliver predictable wear patterns, simplifying tooling inventories and replacement planning. Reach and mounting that suit deep internal operations A 400 mm overall length provides the reach needed for through‑bore and shoulder operations in components with extended bores, while the documented clamping holder size 16 gives clear guidance for compatible toolholders and set‑ups. The combination of shank dimensions and clamping interface reduces overhang‑related deflection; in practice this reduces the need for conservative feeds and allows a focus on optimising cutting data. Clear numeric specifications make fixturing decisions faster and support straightforward integration into CNC tool libraries for repeatable set‑up. Durability, identification and supply reliability The ISO designation S40V CKUNR identifies the bar precisely for procurement and machine set‑up, simplifying replacement and stock management. Constructed for workshop durability, the assembly’s dimensions and balanced mass support long service intervals when combined with correct clamping torque and routine inspection. Sourcing through established channels ensures traceability and consistent quality control: Metav’s distribution provides a centralised supply chain and documentation for procurement teams that require reliable, repeatable purchases. For robust internal turning choose Teknik Makina’s precision boring bar — contact Metav Werkzeuge for application guidance and reliable supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: RK756TM Manufacturer: Teknik Makina Article designation (ISO): S40V CKUNR Product: CKUNR for KNUX Indexable Inserts Core technical data Shank diameter: 40 mm Cutting height: 55 mm Overall length: 400 mm Diameter: 50 mm Weight: 3.999 kg Cutting angle: 93° Cutting direction: right Clamping holder size: 16 Special features Compatible with KNUX 1604 indexable inserts ISO designation S40V CKUNR Right‑hand tool for internal turning FAQ What insert type fits this boring bar? The bar is intended for KNUX 1604 indexable inserts; the CKUNR geometry provides correct seating and clamping for that insert family in Teknik Makina’s S40V CKUNR configuration (SKU RK756TM). Is this tool suitable for left‑hand operations? No — the boring bar is configured for right‑hand cutting with a 93° cutting angle, so it is intended for right‑hand internal turning applications. Which dimensions are relevant for setting up the tool? Key dimensions are 40 mm shank diameter, 400 mm overall length, 50 mm body diameter and a cutting height of 55 mm; weight is 3.999 kg — these values guide clamping, overhang and balance decisions. What does the ISO designation S40V CKUNR indicate? The ISO code S40V CKUNR identifies the shank size and the CKUNR holder geometry, providing an exact reference for procurement, tool lists and compatibility checks. For which operations is this bar primarily designed? This tool is designed for internal turning and boring using KNUX 1604 indexable inserts, offering reach for deeper bores and the rigidity required for consistent finishing and dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 32 mm shank and compatibility with TPKN 2204 indexable inserts for reliable, repeatable milling cycles; the tool’s 50 mm cutting diameter and three cutting edges balance material removal with stability. Order the cutter directly via Metav Werkzeuge or contact our consultants for tailored advice. Shank Milling Cutter S134TM — 50 mm diameter, 32 mm shank, Teknik Makina The Shank Milling Cutter S134TM is an indexable-insert cutter designed for external milling tasks using TPKN 1103–2204 inserts, offering a compact reach and secure clamping for workshop and production environments. 50 mm cutting diameter 32 mm shank diameter Compatible with TPKN 2204 inserts Three cutting edges for stable cutting Faster cycles with an indexable-insert system The S134TM is built around an indexable insert concept that reduces downtime compared with regrinding solid tools. By accepting TPKN 2204 inserts, the cutter enables quick edge replacement and consistent cutting geometry, which translates into predictable cycle times and lower cost per edge. The three-edge configuration provides a good compromise between material removal rate and tool life, so processes can be planned with greater confidence. Secure clamping and straightforward maintenance A positive mechanical fit combined with an M8x24 Torx screw and the supplied 5 mm Allen key ensures repeatable clamping and simple insert changes. This robust fastening minimises the risk of movement under load and simplifies maintenance routines in busy shops. Clear, tool-driven connection points reduce setup time and help technicians restore the tool to service quickly after an insert change. Compact design for stable machining and reach With a 32 mm shank and 120 mm overall length, the cutter offers a balance between rigidity and accessibility. The 50 mm diameter and 55 mm cutting length create an effective cutting envelope for many external milling operations, allowing the tool to be used where reach is necessary without excessively compromising stiffness. At a weight of 0.896 kg, handling and tool changes remain practical for manual setups and automated tool stations alike. Predictability through replaceable geometry Using replaceable inserts means cutting geometry stays consistent from edge to edge, supporting process repeatability and easier quality control. The system reduces waste of substrate material and limits downtime to insert replacement rather than resurfacing. For production environments seeking steady output and easier inventory management, the replaceable-insert approach of this shank cutter supports a measured, cost-effective workflow. For secure, consistent indexable milling choose the Teknik Makina Shank Milling Cutter S134TM and order through Metav Werkzeuge — for further technical advice or to confirm compatibility with specific inserts contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S134TM Manufacturer: Teknik Makina Designation: Shank milling cutter for TPKN 1103-2204 indexable inserts Facts Cutting diameter: 50 mm Shank diameter: 32 mm Cutting length: 55 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.896 kg Torx screw: M8x24 Torx key: 5 Allen Special features Compatible inserts: TPKN 2204 Fits TPKN 1103-2204 indexable inserts SKU: S134TM FAQ Which indexable inserts fit this cutter? The cutter accepts TPKN 2204 inserts and is specified for the TPKN 1103–2204 range, enabling standardised replacement inserts compatible with the Shank Milling Cutter S134TM by Teknik Makina. How are inserts secured in the cutter? Inserts are fastened with an M8x24 Torx screw; tightening and loosening are carried out with a 5 mm Allen key on the S134TM to ensure a reliable, repeatable clamp. What are the key dimensions for workplace planning? Key dimensions are: 50 mm cutting diameter, 32 mm shank diameter, 55 mm cutting length and 120 mm overall length, with a mass of 0.896 kg for handling and toolholder selection. Is the tool suitable for quick insert changes during production? Yes, the indexable system of the S134TM supports rapid insert replacement, reducing machine downtime and enabling swift resumption of production runs. Does the tool provide stable machining for external milling operations? The combination of a 32 mm shank, three cutting edges and a compact 120 mm overall length gives the shank cutter stable handling characteristics for many external milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable, high‑performance milling with a 50 mm diameter and five cutting edges delivers consistent material removal and reduced vibration; the 25 mm shank provides secure clamping for stable operation. Order the tool directly via Metav Werkzeuge or consult the technical team for application and compatibility advice. S350TM Shaft milling cutter – 50 mm, 5‑flute, for APKT 1003 (Teknik Makina) The S350TM is a robust shaft milling cutter engineered for heavy face and peripheral milling using F75° APKT 1003 indexable inserts, offering a balance of removal rate and surface quality for workshop and production environments. 50 mm cutting diameter Five cutting edges for balanced removal 25 mm shank for secure clamping Compatible with APKT 1003 indexable inserts Consistent removal and predictable process performance The milling tool combines a 50 mm diameter with five cutting edges to reduce harmonics and distribute cutting forces evenly. This geometry supports higher feed per tooth at stable chip formation, which leads to a more predictable cycle time and consistent surface finish. Using indexable inserts like APKT 1003 means cutting edges can be renewed quickly without regrinding the tool body, keeping machine uptime high and reducing overall tooling cost per part. Secure clamping and straightforward insert handling A 25 mm shank ensures rigidity in common toolholders and reduces radial runout under load, improving tool life and repeatability. Insert retention uses an M2.5×5.5 screw secured with a Torx T8 key, enabling rapid insert changes while maintaining correct seating and cutting geometry. Clear access to the screw and standardised fixing means less downtime during maintenance and a straightforward replacement routine for operators and technicians. Efficient in face and peripheral milling operations Designed with an F75° insert seat and a 90° cutting angle, the tool is optimised for both face and light peripheral milling tasks where a compromise between material removal and surface quality is required. The overall length of 100 mm offers reach without excessive overhang, helping to control deflection. This combination supports tight process windows and makes the cutter suitable for batch production where repeatability and throughput are priorities. Built for workshop reliability and simple logistics Weighing 0.583 kg, the tool body is compact yet robust, allowing quick handling and easy storage. Compatibility with APKT 1003 inserts from established vendors such as Korloy simplifies procurement and spare‑parts management. The modular nature of the system reduces total cost of ownership: worn inserts are replaced rather than the complete cutter, and standard fixing hardware keeps inventory needs minimal. This results in dependable performance across shifts and operators. For a tailored compatibility check or to secure supply of the Teknik Cutting Tools S350TM shaft milling cutter, contact Metav Werkzeuge in Emmerich for prompt technical advice and reliable delivery. Technical data Article number: S350TM Manufacturer: Teknik Makina Description: Schaftfräser for F75° APXT 1003 Indexable Inserts Core dimensions Diameter: 50 mm Cutting edges: 5 Overall length: 100 mm Shank diameter: 25 mm Cutting length: 35 mm Weight: 0.583 kg Cutting angle: 90° Compatibility & features Compatible with APKT 1003 indexable inserts Fixing screw: M2.5×5.5 Torx key: T8 Suitable insert manufacturer: Korloy Geometry: F75° FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; the seat is designed for the F75° geometry used with these inserts. What is the required fixing hardware for insert changes? Insert retention uses an M2.5×5.5 screw tightened with a Torx T8, ensuring secure seating and easy replacement. What shank size is needed for correct clamping? A toolholder that accepts a 25 mm shank is required; the shank diameter supports stable clamping for the stated cutting conditions. What milling tasks is the tool best suited for? The cutter is optimised for face and peripheral milling where a balance of material removal and surface finish is needed, benefitting batch and serial production. Who manufactures and supplies the S350TM shaft milling cutter? The S350TM is supplied by Teknik Makina (Teknik Cutting Tools) and distributed via Metav Werkzeuge, with compatibility and technical support available from the distributor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, left-hand boring solution that combines secure ER22 clamping with a 40 mm shaft and 300 mm overall length for stable, repeatable machining — order directly via Metav Werkzeuge or request consultation for specification matching. Teknik Makina SIL S40T Boring Bar — Left-hand operation, Ø40 mm shaft, ER22 clamping A robust SIL S40T boring bar from Teknik Makina engineered for left-hand machining with ER22 clamping; designed for use with 16–22ER indexable inserts in demanding workshop and industrial turning operations. Left-hand cutting direction Shaft Ø 40 mm, overall length 300 mm Compatible with 16–22ER indexable inserts ER22 clamping for secure insert fixation Rigid design for steady cutting and repeatable results The bar’s Ø40 mm shaft and 300 mm overall length are balanced to provide a rigid toolholding solution that limits vibration and deflection during heavy cuts. Rigid construction translates directly into consistent surface finish and prolonged insert life, as reduced chatter lowers edge wear. The relatively compact mass (approx. 2.842 kg) contributes to stable rotating dynamics while remaining manageable for standard tool posts and clamping systems. For production settings where cycle-to-cycle consistency matters, this geometry supports tighter tolerances and fewer reworks. Quick tool changes and reliable insert compatibility Designed specifically for indexable tooling, the bar accepts 16–22ER insert sizes and is secured by an ER22 clamping arrangement. The 60 mm cutting height gives adequate support for typical insert geometries used in roughing and finishing passes. The left-hand cutting orientation suits operations where a counter-rotation or specific tool path is required; left-hand tools cut when the tool moves contrary to the usual right-hand direction, enabling flexibility in lathe setups and part handling. This configuration reduces setup complexity by matching the bar to established insert standards and collet systems, enabling efficient changeovers and predictable cutting behaviour. Practical benefits for the workshop and production line A focus on tool-holding integrity and standard compatibility means fewer surprises at setup: secure clamping reduces the need for frequent retightening and lowers the probability of insert slippage under load. The bar’s ISO designation SIL S40T signals a recognised form factor that integrates with common holders and adaptors, simplifying inventory and procurement. Where cycle time and surface quality are priorities, using a dedicated indexable bar with aligned dimensions and clamping reduces downtime and supports continuous operation. For contractors and in-house workshops alike, this translates into measurable improvements in throughput and part quality. Suitability and application notes This tool is intended for indexable-insert turning and boring in conventional lathe environments where left-hand cutting is required. The combination of ER22 clamping and support for 16–22ER inserts makes it appropriate for a wide spectrum of steels and general-purpose turning tasks. The design emphasises mechanical stability and straightforward integration rather than specialised coolant or internal-feed features; for applications requiring internal coolant or unconventional geometries, consider verifying compatibility with the toolholder and machine setup before ordering. Contact Metav Werkzeuge for personalised technical advice and prompt dispatch from Emmerich — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical data Article number: K336TM Model: SIL S40T Description: SIL for 16-22ER Indexable Inserts Manufacturer: Teknik Makina Dimensions & weight Shaft diameter: 40 mm Diameter: 50 mm Cutting height: 60 mm Overall length: 300 mm Weight: 2.842 kg Cutting direction: left Features & compatibility For 22 ER indexable inserts ER22 clamping Compatible with 16–22ER inserts ISO designation: SIL S40T ECLASS: 21180806 FAQ What insert sizes are supported by this boring bar? The boring bar accepts 16–22ER indexable inserts; the ER22 clamping is specified to secure those insert sizes reliably in typical turning operations. Is this tool suitable for right-hand and left-hand use? This model is configured for left-hand cutting; for right-hand operations, select a corresponding right-hand variant rather than reversing usage. Which clamping system is required for secure mounting? The bar uses ER22 clamping; pairing with an ER22-compatible holder ensures correct fixation and repeatable tool positioning. How does the shaft diameter affect machining stability? A Ø40 mm shaft increases rigidity compared with smaller-diameter bars, reducing deflection under load and improving surface finish and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, productivity-focused solution with a 50 mm diameter and 150 mm cutting length for consistent holemaking and reduced tool change time; benefit from a 40 mm shank for secure clamping. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Teknik Makina Indexable Drill U202TM – 50 mm, 150 mm cutting length A compact, industrial indexable drill U202TM designed for precision holemaking in machining centres and drilling setups, equipped for replaceable Korloy WCM-0804 inserts 50 mm diameter for standard bore operations 150 mm effective cutting length for deeper holes 40 mm shank for secure clamping Compatible with Korloy WCM-0804 inserts Increased throughput through stable drilling geometry The U202TM is engineered to deliver repeatable hole quality by combining a 50 mm cutting diameter with a long 150 mm cutting length, which reduces the need for multiple tool changes on longer bores. The 40 mm shank ensures secure holding in standard toolholders and minimises micro-movements during cutting, contributing to tighter tolerances and fewer reworks. Emphasis on rigidity translates into improved cycle times and consistent surface finish, making the tool a rational choice where productivity and dimensional reliability are priorities. Cost-efficient insert system for predictable tool life Using the proven WCM-0804 insert format from Korloy allows quick index changes and straightforward stock management. The insert-based design separates cutting geometry from the tool body, so worn edges are replaced instead of the entire tool, lowering running costs and inventory value over time. This configuration supports a predictable maintenance rhythm and faster on-machine recovery; the result is reduced downtime and a measurable improvement in cost per hole for batch and single-part production. Practical handling and shopfloor integration With an overall length of 265 mm and a tool weight of 2.725 kg, the drill balances reach and handling for common machining cells. A tool connection length of 68 mm provides sufficient engagement for standard holders while limiting overhang to control vibration. These physical attributes simplify tool presetting and mounting workflows, helping maintain spindle life and reduce set-up time. For operations requiring dependable drilling at pace, the design facilitates straightforward integration and stable process windows. Contact Metav Werkzeuge for tailored toolholder suggestions and matching inserts to ensure the U202TM performs optimally in the intended machine and material setup — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: U202TM Manufacturer: Teknik Makina Product name: Indexable drill (Vollbohrer) SKU: U202TM Core dimensions Diameter: 50 mm Overall length: 265 mm Cutting length: 150 mm Shank diameter: 40 mm Shank connection length: 68 mm Weight: 2.725 kg Compatibility & features Compatible inserts: WCM-0804 Compatible insert manufacturer: Korloy Suitable for use in machining centres and drilling machines Indexable insert system for reduced tooling costs FAQ What insert type does this drill use? The drill is designed for WCM-0804 inserts; the Korloy-compatible format enables fast index changes and economical running costs for the U202TM indexable drill. Which machines suit this tool? Its 40 mm shank and 68 mm connection length make the tool suitable for standard drilling spindles and toolholders commonly found on machining centres and dedicated drilling machines. How does the tool contribute to production efficiency? By combining a 150 mm cutting length with an insert system, the tool reduces tool changes and downtime, improving parts-per-shift throughput and lowering the cost per hole. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact coolant-through design combined with a precise 90° cutting geometry and compatibility with XNEX 0806 indexable inserts deliver reliable shoulder turning and reduced cycle times; order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head for XNEX 0806 indexable inserts (50 mm, coolant-through) — Teknik Makina The corner tool head for XNEX 0806 indexable inserts is an angle toolholder engineered for turning applications, providing stable shoulder cuts and compact installation for machine shops and production cells. 50 mm diameter with 90° cutting angle Internal coolant supply for chip control Compatible with XNEX 0806 inserts (SECO) Compact 45 mm overall length for tight setups Precise geometry for reproducible shoulder turning The toolhead’s 50 mm body and defined 90° cutting angle create a stable reference for shoulder and facing operations, reducing rework and set-up iterations. With the insert seat tailored to the XNEX 0806 family, the toolhead ensures repeatable seating and consistent cutting geometry, which translates into predictable dimensional outcomes. This stability benefits batch production where identical profiles are required across multiple parts, and it shortens machine idle times due to fewer adjustments. Coolant-through feed improves tool life and process security The integrated internal coolant channel directs cutting fluid directly to the cutting edge, improving heat dissipation and chip evacuation at the critical contact zone. This targeted cooling lowers thermal loads on the insert, slowing wear and helping maintain cutting-edge geometry for longer. The result is higher tool life and fewer insert changes per shift, increasing uptime and reducing tooling consumption — measurable gains for production-oriented workshops. Robust clamping and compact form for tight workspaces Designed with a short 45 mm overall length, this head fits compact tool posts and enables close-radius operations without interference. The clamping system uses a T15 Torx key and the M4x12.5 fixing screw for secure, repeatable retention of the cutting insert; this simple, serviceable fastening reduces downtime during index changes. At approximately 0.394 kg, the assembly supports rigid mounting while keeping mass low to minimise toolholder inertia, which helps maintain surface finish and dimensional stability during high-speed rotations. Contact Metav Werkzeuge today to discuss how the Teknik Makina corner tool head with coolant-through capability can be integrated into existing setups and to request tailored configuration advice from our specialists Technical data SKU: T841-1TM Product type: Corner tool head Label: 50mm Eckmesserkopf XNEX 0806 L45mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21181015 UID: T841-1TM Dimensions & performance Body diameter: 50 mm Shank/seat diameter: 22 mm Overall length: 45 mm Cutting angle: 90° Number of cutting edges: 5 Weight: 0.394 kg Fixing screw: M4x12.5 Torx key: T15 Features & compatibility Internal coolant supply (coolant-through) Designed for XNEX 0806 indexable inserts Compatible insert manufacturer: SECO Short installation length for compact setups Secure Torx fastening for repeatable clamping FAQ What inserts fit this tool head? The corner tool head is designed to accept XNEX 0806 indexable inserts; compatibility with SECO-specified inserts is confirmed for secure seating and correct cutting geometry. Is the tool head suitable for coolant-through machining? Yes, the head features internal coolant to feed cutting fluid directly to the insert edge, improving chip removal and reducing insert wear. Which fastening hardware is required for insert clamping? Clamping uses a T15 Torx key and an M4x12.5 screw for reliable and repeatable retention of the indexable insert. Can this head be used in compact tool posts? The compact 45 mm overall length is intended for tight setups and close-clearance operations where a reduced projection is necessary. How does the 90° cutting angle benefit production? A 90° geometry provides a clear shoulder reference and uniform contact conditions, which aids in producing consistent part faces and speeds up set-up for batch work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 50 mm head diameter, internal coolant and proven compatibility with ADMT 1204 indexable inserts to increase productivity and reduce tool-change frequency; order the corner tool head directly via Metav Werkzeuge or ask our consultants for application advice. Corner tool head T215-1TM – 50 mm diameter, internal coolant (Teknik Cutting Tools) Corner tool head T215-1TM is a compact turning head designed for external and profile turning with ADMT 1204 indexable inserts, delivering stable performance in light to medium turning operations. 50 mm head diameter Internal coolant supply Fits ADMT 1204 indexable inserts (Walter) Compact L45 mm length, five cutting positions Maximised metal removal with a compact footprint The compact 50 mm diameter and L45 mm overall length deliver a rigid cutting geometry that supports higher material removal rates without demanding a larger tool post. The head’s 90° cutting angle concentrates cutting forces into a predictable vector, reducing chatter and enabling shorter cycle times on batch work. With five cutting positions, the head extends productive operating intervals before maintenance is required, translating directly into fewer tool changes and improved uptime on the shopfloor. Coolant-fed cutting for longer, more consistent tool life Integrated internal coolant channels ensure the cutting edge receives directed coolant flow at the tool–workpiece interface. This improves chip evacuation, reduces thermal load on the insert and enhances surface integrity of the workpiece. The result is extended tool life and a more consistent finish across runs, which is particularly valuable when working to tight dimensional tolerances or when running longer production sequences. Secure clamping and proven insert compatibility for reproducible results Accepting ADMT 1204 indexable inserts and compatible with inserts from Walter, the head uses a Torx screw fix of M3x7 secured with a T8 key for reliable seating and repeatable indexing. The light 0.35 kg mass of the head contributes to reduced centrifugal and inertial forces in turning, while the robust clamp arrangement maintains seating accuracy during interrupted cuts, delivering reproducible part quality across shifts. Supply confidence and technical partnership for workshop success Sourced from Teknik Cutting Tools and available through Metav Werkzeuge, this tool head benefits from a distribution network focused on accessibility and reliable supply. Metav’s emphasis on making precision affordable, backed by decades of expertise and a broad industrial offering, supports predictable procurement and rapid replacement when needed — an important consideration for production environments that cannot tolerate downtime. Speak with Metav Werkzeuge in Emmerich to specify the T215-1TM corner tool head for the intended turning application and ensure the correct insert and coolant configuration for best results Technical data Article number: T215-1TM EClass: 21181015 Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 45 mm Weight: 0.35 kg Cutting angle: 90° Cutting positions: 5 Special features Internal coolant For ADMT 1204 indexable inserts Compatible with Walter inserts Torx screw M3x7 Torx key T8 FAQ How does the internal coolant improve performance? Internal coolant directs fluid to the cutting zone, improving chip evacuation and reducing heat; the T215-1TM’s internal coolant helps extend insert life and maintain consistent surface finish. Which inserts fit this head? The head accepts ADMT 1204 indexable inserts and is dimensioned for compatibility with inserts from Walter, allowing easy integration into existing insert stocks. What fastening hardware is required for insert clamping? Insert clamping uses an M3x7 Torx screw tightened with a T8 key for secure and repeatable seating of the insert in the T215-1TM. Is the head suitable for heavy interrupted cuts? The compact geometry and robust clamping are designed to handle light to medium interrupted cuts; stable performance depends on machine rigidity and selected insert grade. Can the head be used for profile turning and facing operations? Yes — the 90° cutting angle and multiple cutting positions make it suitable for profile turning and facing tasks where ADMT 1204 inserts provide the required edge geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust T‑slot milling solution that combines compatibility with DCMT 11T3 indexable inserts, a 50 mm cutter diameter and a 25 mm shaft for secure mounting and consistent results. Order the tool directly via Metav Werkzeuge or contact the specialists for integration advice. T-Nut Cutter S070TM — 55° / 35° insert angles, 50 mm diameter (Teknik Makina) The T-Nut Cutter S070TM is a precision milling head for producing T-slots and grooves in steel components, engineered for use with DCMT and VBMT indexable inserts and designed for stable, repeatable machining. Compatible with DCMT 11T3 indexable inserts 50 mm diameter for deep T-slots Shaft diameter 25 mm for secure mounting Three cutting edges for smooth material removal Stable mounting for repeatable machining results The S070TM is built to reduce vibration and runout through a balanced geometry and a shaft diameter 25 mm that secures the toolholder interface. A stable mounting improves surface finish and tool life, which leads to more predictable cycle times in serial production. The 50 mm diameter and the cutter’s mass distribution contribute to steadier cutting forces, while the three cutting edges ensure continuous material engagement for a uniform chip flow and reduced rework. Flexible insert choices lower tooling costs Compatibility with indexable inserts such as DCMT 11T3 (and similar VBMT types) means insert tips are replaced rather than the whole head, reducing consumable costs and downtime. The tool supports a 55° approach geometry for DCMT and 35° for VBMT, which allows adjustment of cutting angle to match specific slot profiles and material behaviours. For operations where tool change frequency and inventory efficiency matter, this design facilitates standardised insert stocking and straightforward tip indexing. Geometry and lengths optimised for steel machining Designed for high-class steel machining, the cutter offers a cutting length 40 mm and a total length 120 mm, enabling deep T-slot creation without compromising stability. The cutter’s geometry balances clearance and support to deliver clean slot walls and consistent dimensions, even in tougher steel grades. Clearances and chip evacuation characteristics are tuned to reduce heat buildup, which extends insert life and maintains dimensional accuracy across longer runs. Quick assembly and straightforward maintenance Maintenance is uncomplicated thanks to the standard fastening hardware and accessible insert clamp. The cutter uses an M3.5x9 Torx screw secured with a T15 Torx key, enabling rapid insert changes and consistent torque during reassembly. This practical maintenance approach keeps machine downtime to a minimum and helps maintain cutting performance. Weight and handling were considered in the design—at approximately 0.584 kg the tool is heavy enough for stability yet light enough for safe handling during setup. For reliable T-slot production with proven insert compatibility, request the Teknik Makina T‑Nut Cutter S070TM through Metav Werkzeuge; our technical team is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to assist with specifications and order placement. Technical data Article number: S070TM Manufacturer: Teknik Makina Product: T‑Nut Cutter — 55° for DCMT and 35° for VBMT indexable inserts Dimensions & core data Cutter diameter: 50 mm Shaft diameter: 25 mm Cutting length: 40 mm Total length: 120 mm Number of cutting edges: 3 Weight: 0.584 kg Features & compatibility Compatible inserts: DCMT 11T3 Cutting angles: 55° / 35° Torx screw: M3.5x9 Torx key: T15 Application note: suitable for high‑class steel machining FAQ What inserts are compatible with this T‑Slot cutter? The cutter accepts DCMT 11T3 indexable inserts and can also be used with equivalent VBMT styles; the S070TM design supports the specified insert seat and clamping arrangement. Which cutting angles are provided and what do they mean? The tool is designed for 55° geometry for DCMT inserts and 35° for VBMT inserts; these angles refer to the insert rake/approach and determine chip flow and slot profile suitability. How long are the cutting and overall lengths? This T‑nut cutter features a cutting length of 40 mm and a total length of 120 mm, permitting deeper slotting while maintaining rigidity. What fastening hardware is required for insert changes? Insert clamping uses an M3.5x9 Torx screw, tightened or released with a T15 Torx key, allowing rapid and repeatable insert replacement. Is the cutter suitable for steel machining? Yes — the S070TM is specified for high‑class steel machining, with geometry and chip evacuation suited to demanding steel applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of fast indexable insert changes and a stable 25 mm shank ensures consistent high throughput and reduced downtime; pair this reliability with the precise 60° profile and robust 50 mm cutting diameter for dependable T-slot production. Order the T-slot cutter directly via Metav Werkzeuge or ask the consultants if assistance is required. T-slot cutter TKC250TM — 50 mm diameter, 60° cutting angle by Teknik Makina T-slot cutter TKC250TM designed for efficient production of standard 60° T-slots with indexable inserts in industrial milling applications 50 mm diameter for wide T-slot cuts Compatible with DCMT 11T3 inserts 25 mm shank diameter for secure clamping 60° cutting angle for standard T-slots Precision and productivity for repetitive T-slot machining The TKC250TM delivers a measurable productivity advantage through its 50 mm diameter and 4 cutting edges, enabling a high material removal rate when used with suitable indexable inserts. The cutter accepts DCMT 11T3 inserts, which allow quick edge changes and consistent cutting geometry, reducing non-productive time. The specification of a 60° cutting angle corresponds to the common T-slot profile, so set-up is straightforward and repeatable. The combination of robust geometry and indexable tooling supports efficient series production on CNC milling centres. Secure clamping and straightforward maintenance A 25 mm shank provides stable clamping in standard toolholders and contributes to vibration damping during heavy cuts, while the M3.5x9 Torx screw and T15 key enable rapid insert replacement without special tools. The indexable-insert design means that regrinding is avoided; worn edges are replaced in seconds, maintaining process consistency. This construction supports planned maintenance strategies: shorter changeover times and predictable tooling costs compared with solid cutters. Tool dynamics and machine compatibility With an overall length of 120 mm and a 30 mm cutting length, the cutter balances reach with rigidity for accessible T-slot machining in many workpiece setups. The tool mass of 0.521 kg contributes to dynamic stability—helping to reduce chatter when used within appropriate spindle speeds and with the right insert grade. These dimensional and mass characteristics suit production machines with adequate torque and stable fixturing, ensuring the cutter performs as intended under continuous operation. Practical setup tips and application context The TKC250TM is optimised for producing standard-profile T-slots; insert choice and cutting parameters should be matched to the workpiece material and machine capability. The indexable insert approach supports flexible selection of grades for steel, aluminium or other materials (select grade per supplier guidance). For feed and speed settings, follow the insert manufacturer's recommendations and consider machining tests to fine-tune parameters for the specific setup. For complex applications, consult Metav Werkzeuge for advice on insert grades and holder compatibility. For practical integration or specification checks of the Teknik Cutting Tools T-slot cutter TKC250TM, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and ordering support. Technical data SKU: TKC250TM Product name: T-slot cutter Manufacturer: Teknik Makina Compatible inserts: DCMT 11T3 Torx screw: M3.5x9; Torx key: T15 Core dimensions Diameter: 50 mm Shank diameter: 25 mm Cutting length: 30 mm Overall length: 120 mm Cutting edges: 4 Cutting angle: 60° Weight: 0.521 kg Special features Indexable insert tool Quick insert changes with Torx fastening 4 cutting edges for productive cuts Designed for standard 60° T-slot profiles FAQ Which inserts fit the cutter? The cutter is designed for DCMT 11T3 indexable inserts; use inserts suited to the material and application for the best performance with the TKC250TM. What is the shank size and how does it affect clamping? The 25 mm shank provides secure clamping in standard toolholders and improves rigidity compared with smaller shank diameters. How many cutting edges are provided and what is their benefit? The tool has 4 cutting edges, enabling higher feed rates and smoother cutting transitions for repetitive T-slot production. What is the cutting profile angle of the tool? The cutter produces a 60° T-slot profile, which matches common industrial T-slot standards. Which fastening parts are required for insert changes? Insert retention uses a M3.5x9 Torx screw tightened with a T15 key for straightforward insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T-slot machining thanks to a 50 mm cutting diameter and a 25 mm shank, combined with a robust 2 cutting edges geometry for efficient steel removal; order the TKC300TM directly via Metav Werkzeuge or ask our consultants for specification support. T-slot milling cutter TKC300TM – 50 mm diameter, 25 mm shank (Teknik Makina) The T-slot milling cutter TKC300TM is a round milling cutter engineered for accurate T-slot creation in steel using Korloy MGM 3C indexable inserts. 50 mm diameter for deep T-slots 25 mm shank for secure clamping Compatible with Korloy MGM 3C inserts Two cutting edges for efficient stock removal High-efficiency cutting with controlled geometry Designed to produce repeatable T-slot profiles, the TKC300TM uses a 50 mm diameter and balanced head geometry to maintain stable chip evacuation and consistent flank form. The 2 cutting edges reduce instantaneous cutting forces, which can prolong insert life and lower tool-change frequency. For process planners, this translates into dependable cycle times and predictable tool behaviour during medium- to long-run production. Secure clamping and consistent seating for serial work Clamping reliability is essential for dimensional control; the cutter head is fastened with an M8 Torx screw and set using a 6 mm hex key to guarantee repeatable insert seating. The 25 mm shank ensures adequate stiffness in the toolholder while keeping the assembly compact. At approximately 0.498 kg, the tool minimises imbalance, helping to preserve surface finish and achieve consistent tolerances across batches. Simplified logistics through standard insert compatibility Configured for Korloy MGM 3C indexable inserts, the design reduces inventory complexity by using widely available, standard insert types. The round cutter profile creates the typical undercut required for T-bolts and clamping hardware, enabling secure fixture assembly on machine tables and modular fixturing systems. Compatibility with common inserts also aids rapid replacement and reduces downtime in production environments. Practical application advice for machinists and planners The cutter suits CNC milling centres and vertical milling machines where accurate slot depth and flank geometry are required; it is optimised for steel machining, offering a balance between aggressive metal removal and control of cutting temperatures. Process engineers will appreciate the clear dimensional data and straightforward mounting procedure, which support efficient set-up and predictable machining outcomes. Technical data sheets are available to help integrate the tool into established cutting strategies. For expert guidance on insert selection and fast delivery from Emmerich, contact Metav Werkzeuge for the TKC300TM and precision tooling solutions Technical data SKU: TKC300TM Product name: T-slot cutter Manufacturer: Teknik Makina Core dimensions Diameter: 50 mm Shank diameter: 25 mm Overall length: 120 mm Cutting height: 3 mm Number of cutting edges: 2 Cutting–shank distance: 12.75 mm Weight: 0.498 kg Compatibility & features Compatible inserts: Korloy MGM 3C Torx screw: M8 Hex key: 6 mm Design: round milling cutter for T-slots Intended use: steel machining FAQ Which inserts fit the cutter best? The TKC300TM is designed for Korloy MGM 3C indexable inserts, which provide the correct geometry and clamping interface for reliable T-slot cutting. What machines are suitable for use with this tool? This T-slot cutter is suitable for CNC milling centres and vertical milling machines where axial and radial tool rigidity are ensured. How does the clamping system affect repeatability? The M8 Torx screw and 6 mm hex key clamping secure the insert; the resulting repeatable seating improves dimensional consistency across serial production when using the TKC300TM. What should be considered when machining steel? When using this cutter for steel machining, monitor cutting speeds and cooling to manage temperatures and wear; the tool geometry supports efficient chip evacuation for continuous operation. Is the tool heavy and does that affect balancing? Weighing about 0.498 kg, the tool is balanced to minimise centrifugal forces and support stable rotation at typical milling speeds for its intended applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust 50 mm T‑slot cutter that accepts MGMN 300 indexable inserts and features an M16 thread for secure mounting; combine precise engagement and straightforward insert changes to keep production steady — order directly via Metav Werkzeuge or request advice from the technical team. T-slot cutter for MGMN 300 Indexable Inserts – 50 mm, M16 thread (Teknik Makina) The T-slot cutter is intended for accurate T‑slot machining with MGMN 300 indexable inserts, suited to industrial milling and workshop production. 50 mm cutter diameter for deep T-slots Compatible with MGMN 300 indexable inserts M16 thread for secure mounting 65 mm overall length for stable engagement Faster setup and consistent slot profiles for productive runs Designed to streamline T‑slot production, this cutter accepts MGMN 300 indexable inserts for quick insert changes and consistent cutting geometry. The 50 mm cutter diameter delivers the required engagement for standard T‑slot profiles, while the tool’s geometry and two cutting edges reduce the number of passes needed. As a result, cycle times are shortened and part-to-part accuracy is improved, which supports higher throughput in both small‑batch and repetitive manufacturing. Secure mounting and vibration control for surface quality A substantial 25 mm shank and an M16 thread connection provide secure clamping and concentricity in milling holders, promoting stability during axial cutting. The tool’s two cutting edges and a 3 mm cutting-edge height contribute to smooth chip evacuation and balanced cutting forces, reducing chatter and improving surface finish. The 65 mm overall length maintains a compromise between accessibility and rigidity, allowing reliable machining without excessive overhang. Practical benefits for workshop inventory and compatibility The cutter’s compatibility with Korloy indexable inserts simplifies tool logistics and reduces the range of spare parts required for shop floors that already use that insert system. Lightweight handling (approx. 0.152 kg) and standardised replacement inserts make insert swaps fast, minimising downtime during production changeovers. For operators seeking reliable, repeatable T‑slot machining with proven insert availability, this tool is a pragmatic addition to the tooling cabinet. For procurement or specification advice on the Teknik Makina T‑slot cutter, contact Metav Werkzeuge for tailored support and fast supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930; Metav’s consultants will assist with selection and compatibility checks Technical data Article number: TKC286TM Manufacturer: Teknik Makina Product type: T-slot cutter Facts Diameter: 50 mm Overall length: 65 mm Shank diameter: 25 mm Thread: M16 Cutting edges: 2 Cutting edge height: 3 mm Weight: 0.152 kg Special features For MGMN 300 indexable inserts Compatible with Korloy inserts Requires 6 mm Allen key for clamping Label: 50mm T-Nut Fräser MGMN 300 L65mm eClass: 21180605 FAQ What insert type fits this cutter? The cutter accepts MGMN 300 indexable inserts; Korloy‑brand inserts are compatible and commonly stocked for this tool. How is the cutter secured in the holder? Secure mounting is achieved via an M16 thread and a 25 mm shank, ensuring concentric clamping and reduced runout for the T‑slot cutter. Is the tool suitable for production and prototype work? Yes, the design of the cutter and the use of standard MGMN 300 inserts make it suitable for both short production runs and prototyping where quick insert changes are advantageous. Which SKU identifies this tool for ordering? This item is listed under SKU TKC286TM, supplied by Teknik Makina and available through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust 50 mm cutting diameter combined with compatibility for MGMN 300 indexable inserts to ensure efficient, repeatable T‑slot milling; request stock information or advice via Metav Werkzeuge for fast supply from Emmerich. T-slot cutter by Teknik Makina — 50 mm diameter, for MGMN 300 inserts T-slot cutter for machining T‑slots and grooves using indexable inserts, designed for stable mounting and consistent surface finish on production runs 50 mm cutter diameter for wide T‑slots Compatible with MGMN 300 indexable inserts 3 flutes for balanced cutting action Shank Ø 20 mm for secure clamping Consistent slot quality with fewer passes The large 50 mm diameter and 3 flutes deliver a stable cutting profile that reduces vibration and improves surface finish on each pass. Using MGMN 300 indexable inserts means the tool body remains intact while wear is handled by replacing economical inserts, leading to lower per‑slot costs and shorter downtime. For shops aiming to maintain throughput, the combination of cutter geometry and indexable inserts translates into predictable cycle times and repeatable results. Secure mounting and access for varied setups A Shank Ø 20 mm together with Thread 12 ensures reliable clamping in standard toolholders, while the 55 mm overall length gives sufficient reach for many common T‑slot depths without compromising rigidity. The compact weight of 0.118 kg assists in reducing spindle load and inertia during rapid tool changes. Developed by Teknik Makina for compatibility with Korloy inserts, this tool supports quick insert indexation and consistent seating, which is particularly valuable in batch production where tool change efficiency matters. Production reliability backed by a trusted supplier Selecting this cutter supports lean procurement: the indexable system minimises inventory of complete cutters and keeps replacement costs low. Metav Werkzeuge acts as a quality filter for the European market, offering stable availability and technical guidance from a central location in Emmerich. With a broad product range and long experience in precision tooling, Metav underpins the cutter’s performance with pragmatic supply and sector expertise, reinforcing reliable operation on the shop floor. For technical clarification or to confirm availability of the Teknik Makina T‑slot cutter with MGMN 300 compatibility (SKU TKC320TM), contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data SKU: TKC320TM Product type: T‑slot cutter Label: 50mm T‑Nut Fräser MGMN 300 L55mm Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 55 mm Shank diameter: 20 mm Thread: 12 Weight: 0.118 kg Cutting edges: 3 Cutting edge height: 3 mm eClass: 21180605 Special features Compatible with MGMN 300 indexable inserts Insert manufacturer: Korloy Manufacturer: Teknik Makina SKU: TKC320TM FAQ What inserts fit this cutter? The cutter accepts MGMN 300 indexable inserts; Korloy inserts are specified as compatible for the system. Is the tool suitable for production‑grade T‑slot machining? Yes. The 50 mm diameter and 3 flutes provide stability and surface quality suitable for repetitive production tasks. How is the cutter mounted? Mounting uses the Shank Ø 20 mm and Thread 12 configuration to ensure secure clamping in appropriate toolholders. Can the cutter reach deep T‑slots? The 55 mm overall length offers adequate reach for many standard T‑slot depths while maintaining rigidity for controlled cutting. What is the product SKU for ordering or reference? Reference SKU TKC320TM when enquiring about the Teknik Makina T‑slot cutter and compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision and workshop-ready compatibility: the cutter's 50 mm cutting diameter and 25 mm shank deliver stable, repeatable T-slot profiles while compatibility with Korloy inserts keeps downtime and tooling costs low — order or discuss technical fitment with Metav Werkzeuge for seamless supply and advice. Teknik Makina 50 mm T-slot cutter, 25 mm shank, L120 mm The Teknik Makina 50 mm T-slot cutter for precise profile machining in production and jobbing shops, designed for stable clamping and economical indexable-insert replacement. 50 mm cutting diameter 25 mm shank for secure clamping Compatible with Korloy indexable inserts Consistent slot geometry for efficient production A cutter with a 50 mm cutting diameter and two flutes provides a balanced machining action that reduces vibration and produces a uniform T-profile in a single pass. The cutting height 2 mm helps to define the slot depth precisely, which minimises secondary operations and rework. For manufacturing environments where cycle time and repeatability matter, this tool translates cutter geometry into measurable productivity gains and a predictable surface finish. Fast setup and economical maintenance The 25 mm shank offers secure engagement in standard tool holders, increasing process stability when milling T-slots. Assembly and adjustment are straightforward thanks to the supplied Allen key 6 mm, which simplifies clamp tightening during tool changes. The cutter accepts Korloy inserts, allowing worn edges to be renewed quickly without discarding the entire tool body; this insert system reduces per-cut costs and enables rapid restoration of cutting performance at the bench. Supply reliability and workshop advantages Produced by Teknik Makina, the tool is specified under SKU TKC299TM and designed for routine workshop integration where tooling reliability is required. The use of indexable inserts, a robust shank diameter and a clear profile geometry means less machine downtime and consistent results across batches. Combined with Metav Werkzeuge's distribution and quality-filtering from Emmerich, the tool fits into a predictable supply chain that supports both small workshops and larger production lines. Choose Teknik Makina's T-slot cutter TKC299TM for dependable T-slot machining and contact Metav Werkzeuge for application advice and secure delivery from Emmerich. Technical data Article number: TKC299TM Label: 50mm T-Nut Fräser L120mm Manufacturer: Teknik Makina Product type: T-slot cutter eClass: 21180605 Core dimensions Diameter: 50 mm Overall length: 120 mm Shank diameter: 25 mm Number of flutes: 2 Cutting height: 2 mm Special features Compatible with Korloy inserts Allen key 6 mm SKU: TKC299TM Manufacturer: Teknik Cutting Tools FAQ What are the key dimensions of the cutter? The cutter offers a 50 mm cutting diameter, 25 mm shank and an overall length of 120 mm; it features two flutes and a cutting height of 2 mm for defined slot profiles. Which insert system does the cutter use? This T-slot cutter accepts Korloy indexable inserts, allowing economical edge changes and quick restoration of cutting performance without replacing the entire tool body. Is the cutter suitable for high-volume workshop use? Yes. The combination of a robust shank, balanced two-flute design and insert-based maintenance makes the cutter suitable for repeated production runs where consistency and low downtime are priorities. How is the tool secured and adjusted in the holder? The 25 mm shank permits secure clamping in standard holders and the supplied Allen key 6 mm simplifies tightening during setup and insert changes. What is the SKU for ordering and reference? Reference SKU TKC299TM when enquiring or ordering to ensure the correct T-slot cutter specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision and secure mounting for consistent T‑slot production; the 50 mm cutting diameter and 25 mm shank ensure repeatable slot profiles and stable machining. Order directly via Metav Werkzeuge or request tailored advice from our consultants for application setup and insert selection. T-slot cutter TKC270TM by Teknik Makina — 50 mm diameter, 25 mm shank The T-slot cutter TKC270TM is a purpose-made milling tool for producing precise T‑slots in industrial machining applications, designed for secure mounting and straightforward insert replacement. 50 mm cutting diameter for deep T-slots 25 mm shank for stable clamping Compatible with Korloy indexable inserts M16 thread for secure cutter head mounting Consistent slot geometry for repeatable production The cutter’s geometry with 4 cutting edges and a 3 mm cutting edge height delivers a defined flank and base profile, reducing the need for rework and ensuring consistent component fit. Using indexable inserts in a balanced multi‑edge arrangement spreads cutting forces evenly, which helps to maintain concentricity and prolongs service intervals. The design supports precision workflows where consistency between parts is essential, and the replaceable insert concept keeps downtime for tool changes to a minimum. Stable clamping and machine friendliness A 25 mm shank combined with an M16 threaded cutter head provides a secure connection to compatible toolholders, reducing run‑out and vibration at the cutter‑to‑spindle interface. The tool’s overall length of 65 mm and a modest mass of 0.172 kg aid in maintaining rigidity without excessive overhang. Improved stability translates into better surface finish and tighter dimensional control during slotting operations, supporting higher first‑pass yields and fewer secondary operations. Fast servicing and productivity advantages Compatibility with Korloy indexable inserts makes insert procurement and replacement straightforward, lowering logistics complexity on the shop floor. The modular nature of the cutter head allows quick interchange of worn inserts, so production resumes rapidly with minimal setup effort. The SKU TKC270TM is engineered for straightforward integration into milling cells and manual milling setups where reliable throughput and uncomplicated maintenance routines are priorities. For reliable T‑slot machining choose the Teknik Makina TKC270TM via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for technical guidance and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TKC270TM Label: 50mm T-Nut Fräser L65mm Manufacturer: Teknik Makina ECLASS: 21180605 Diameter: 50 mm Overall length: 65 mm Shank diameter: 25 mm Number of cutting edges: 4 Cutting edge height: 3 mm Weight: 0.172 kg Thread: M16 Product type: T-slot cutter Compatible insert manufacturer: Korloy Cutter head mounting: Threaded M16 FAQ What types of inserts fit this cutter? The TKC270TM accepts Korloy indexable inserts specified for T‑slot geometry; insert choice determines cutting parameters and surface finish. How is the cutter mounted in the toolholder? Mounting is via the M16 threaded cutter head connection; secure clamping with a suitable holder and correct torque is recommended for best performance. Can the cutter be used in high‑volume production? Yes, the TKC270TM is engineered for repeatability and fast insert changes, supporting efficient production cycles when combined with appropriate machining parameters. What measurements define the cutter’s compatibility with existing equipment? Key dimensions are 50 mm diameter and 25 mm shank; overall length 65 mm and a lightweight design (0.172 kg) facilitate integration into many milling set‑ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com