Gibt es einen Hahn und Kolb Online Shop?

Take advantage of precise insert compatibility and secure mounting for uninterrupted machining: the combination of a 50 mm cutting head, 5 cutting edges and a Ø22 mm arbor ensures steady material removal and quick insert changes — order directly via Metav Werkzeuge or consult our team for application advice. Rundplattenfräser – round face mill, 50 mm diameter, for RPMW 1204 indexable inserts (Teknik Makina) The Rundplattenfräser is a round face mill engineered for use with RPMW 1204 indexable inserts, offering a compact cutting head suited to general milling and facing operations. 50 mm diameter cutting head 5 cutting edges for steady removal Bore Ø22 mm for secure mounting Compatible with Korloy RPMW 1204 inserts Consistent insert compatibility reduces setup time and risk The cutter is built for repeatable use with RPMW 1204 indexable inserts, which are small, replaceable cutting pieces fixed to the tool body. Compatibility with Korloy inserts simplifies procurement and reduces inventory complexity. The Ø22 mm arbor interface gives a secure fit to common toolholders, lowering runout risk and improving stability. For workshops, this means fewer interruptions: insert replacement becomes a routine task rather than a production pause, keeping cycle times predictable and maintenance straightforward. Balanced geometry for reliable material removal and surface quality A 50 mm tool diameter combined with 5 cutting edges balances cutting load and feed distribution. More cutting edges permit finer engagement per tooth, which often results in improved surface finish and longer insert life under comparable conditions. The rotational dynamics of a compact, multi-edge cutter reduce vibration, supporting consistent dimensional accuracy during facing and light milling tasks. Where repeatability is required, the cutter’s geometry supports predictable chip formation and easier process parameter tuning. Practical workshop features that save time on the shop floor Fast clamping and low-maintenance handling are built in: the insert is secured with an M4x7 screw tightened using a Torx T15 key, a common configuration in modern tooling that speeds assembly and replacement. The compact overall height and robust mounting minimise handling effort while enabling easy access in crowded setups. Sourcing via Metav Werkzeuge provides the added assurance of a European supply chain and technical guidance, backed by a large product range and a reputation for dependable delivery. Choose the Teknik Makina round face mill from Metav Werkzeuge for precise, repeatable machining with RPMW 1204 inserts — contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: T711TM Manufacturer: Teknik Makina SKU: T711TM Compatible inserts: RPMW 1204 Compatible insert manufacturer: Korloy Facts Diameter: 50 mm Overall height: 40 mm Cutting edges: 5 Bore / shank diameter: 22 mm Torx screw: M4x7 Torx key: T15 Special features Designed for RPMW 1204 indexable inserts Secure Ø22 mm mounting Compact face milling profile Quick insert replacement via Torx T15 FAQ What inserts fit this cutter? The cutter is designed for RPMW 1204 indexable inserts and is compatible with Korloy RPMW 1204 grades; use inserts sized for RPMW 1204 geometry. How is the insert clamped in place? The cutting insert is secured with an M4x7 screw that requires a Torx T15 key for tightening and removal. What is the arbor or mounting diameter? The tool features a Ø22 mm bore for mounting to toolholders accepting a 22 mm interface. How many cutting edges does the cutter provide? This face mill has 5 cutting edges, which support steady chip load distribution and finer surface results under appropriate feeds. Can this cutter be supplied by Metav Werkzeuge? The tool is available via Metav Werkzeuge; contact the team for availability, delivery options and application guidance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid milling solution that combines a Ø 50 mm diameter and 5 cutting edges for higher material removal per revolution, while the 22 mm shank and 40 mm overall length ensure stable clamping and repeatable results; order directly via Metav Werkzeuge or request advice from our consultants. Round Insert Milling Cutter — indexable face mill, Ø 50 mm, 5 cutting edges | Teknik Makina A robust Round Insert Milling Cutter engineered for indexable‑insert milling with RDMT 1003 inserts; designed for stable finishing and general purpose milling in production and workshop environments Ø 50 mm cutter body Five cutting edges for increased productivity 22 mm shank for rigid clamping Compatible with RDMT 1003 indexable inserts Better cutting performance in a compact tool The compact diameter and multi‑edge concept deliver a practical balance between cutting capacity and stability. The Ø 50 mm body combined with 5 cutting edges reduces the cutting load per tooth, which can lead to smoother chip formation and improved surface finish in many indexable milling operations. For users less familiar with insert technology: RDMT style inserts are reversible, indexable carbide plates that can be rotated or changed quickly, so the tool stays productive with minimal downtime. This approach supports efficient series machining where consistent surface quality is required. Stability and repeatability for tighter tolerances A substantial 22 mm shank and a short 40 mm overall length provide a rigid connection between the spindle and the cutting head, limiting vibration during cutting. Reduced deflection contributes to more consistent dimensions across batches and simplifies process set‑up on both CNC machines and milling centres. The tool’s balance—at about 0.302 kg—aids in predictable dynamic behaviour, which is particularly relevant for high spindle speeds or when reproducing the same programme across multiple workpieces. Serviceable fastening for quick maintenance Fast, standardised clamping elements make routine servicing straightforward: the cutter uses a M3,5 locking screw together with a M3,5x8,5 Torx screw, compatible with a T15 Torx key. These standard thread and drive sizes permit quick insert changes and controlled tightening torque without specialised equipment, shortening tool change cycles and keeping machines productive. Clear identification of screw types also helps maintenance teams order correct fasteners and replacement parts without delay. Versatile tool for indexable insert applications Engineered for insert‑based milling, this indexable cutter suits a wide range of workshop tasks where the flexibility of replaceable carbide inserts is desired. The design prioritises straightforward handling and rapid insert replacement over complex geometries, making it a reliable choice for both prototyping and production. With established insert standards, the cutter integrates easily into existing tooling systems and contributes to lower tooling overhead through the reuse of inserts until wear limits are reached. For supply, compatibility checks and technical guidance on Teknik Cutting Tools indexable systems, contact Metav Werkzeuge for tailored advice and prompt provision at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T291TM Brand: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Core specifications Diameter: 50 mm Cutting edges: 5 Overall length: 40 mm Shank diameter: 22 mm Weight: 0.302 kg SKU: T291TM Special features For RDMT 1003 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 FAQ What insert type does this cutter use? The tool is designed for RDMT 1003 indexable inserts; RDMT‑style plates are compatible with the cutter’s pocket and clamp arrangement. Which shank diameter is required for stable clamping? The cutter features a 22 mm shank to ensure rigid mounting and repeatable positioning in standard toolholders. How many cutting edges are available and what is the benefit? This indexable cutter has 5 cutting edges, which distribute the load across more teeth and can improve surface finish and productivity in many milling operations. What fastening components are used for inserts? Insert retention uses a M3,5 locking screw together with a M3,5x8,5 Torx screw; the drive size is T15 for controlled tightening. What is the article number for ordering or reference? Refer to SKU T291TM when enquiring or ordering the Round Insert Milling Cutter from Teknik Cutting Tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a compact 50 mm diameter, four cutting edges and a sturdy 22 mm shank, this milling head delivers consistent, efficient material removal with low vibration. Benefit from straightforward insert replacement and controlled chip evacuation for uninterrupted production. Order the Round Insert Face Mill directly via Metav Werkzeuge or consult the technical team for tailored recommendations. Round Insert Face Mill T270TM — 50 mm, for RDMT 1604 indexable inserts (Teknik Makina) A compact milling cutter body designed for use with RDMT 1604 indexable inserts, the Round Insert Face Mill T270TM suits finishing and light to medium roughing operations in workshop and production environments. 50 mm diameter for compact machining Four cutting edges for steady material removal 22 mm shank for stable spindle fit Compatible with RDMT 1604 indexable inserts High precision and predictable cycle times The cutter body is engineered to provide reliable geometry and consistent cutting engagement; the 50 mm diameter and four cutting edges combine to reduce vibration and improve surface finish. In practice, this means fewer reworks and steadier cycle times, which supports production planning. The tool's weight of 0.35 kg and compact length are optimised for dynamic stability on smaller machining centres, while the modular insert system reduces downtime during insert changes. Secure mounting and fast insert exchange for productivity Mounting and clamp integrity are central to repeatable results. The tool accepts a 22 mm shank, ensuring a rigid connection to the spindle, and uses a locking screw M4x10 together with Torx screw M4.5x11 (Torx key T20) for secure seating of the inserts and plate. This assembly permits quick index changes of RDMT 1604 inserts while maintaining concentricity and cutting stability, so the milling head supports a high-availability workflow with minimal adjustment time. Practical handling and workshop benefits Designed for straightforward workshop use, the cutter accepts the BSP010 support plate and is compatible with commonly stocked RDMT 1604 inserts, simplifying logistics. The combination of compact size and proven fastening hardware makes maintenance predictable: replacement of the indexable inserts and retorque of the fixing screws are rapid procedures, reducing machine downtime. The robust construction and standardised interfaces facilitate integration into existing tool inventories and support a consistent quality output over repeated cycles. Contact Metav Werkzeuge today for precise application advice and fast dispatch from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks Technical data Article number: T270TM Manufacturer: Teknik Makina Product type: Round insert face mill for indexable inserts Compatible inserts: RDMT 1604 ECLASS: 21180902 ETIM: EC011860 Facts Diameter: 50 mm Cutting edges: 4 Overall length: 50 mm Shank diameter (d): 22 mm Weight: 0.35 kg Special features Locking screw: M4x10 Torx screw: M4.5x11 Torx key: T20 Support plate: BSP010 Files available (product images/specs) FAQ Which inserts fit this cutter and how often should they be indexed? The cutter is designed for RDMT 1604 indexable inserts; indexing frequency depends on material and cutting parameters, but the milling head enables fast insert changes to keep process times low. Is the shank size suitable for standard collets and toolholders? Yes, the tool has a 22 mm shank, matching common holders for compact spindle systems and ensuring a rigid connection during milling. What fastening components are delivered with the cutter? The assembly uses a locking screw M4x10, Torx fixing screws M4.5x11 and accepts the BSP010 support plate; a T20 Torx key is specified for maintenance operations. Can the cutter be used for both finishing and light roughing? The cutter body and four-edge configuration are intended for finishing and light to medium roughing operations where stable chip removal and surface quality are required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact milling solution that combines a 50 mm diameter cutting head, internal coolant and dependable Torx clamping for steady, high-quality facing. The solid construction and easy insert replacement reduce downtime and support uninterrupted production. Order directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. Round indexable face mill – 50 mm diameter, internal coolant (Teknik Makina) The Round indexable face mill is a compact cutting head designed for industrial face milling with RDMT 1604 indexable inserts, suitable for precision workshop and CNC operations where repeatable surface finish and fast insert changes are required. 50 mm diameter for precise facing Internal coolant for improved chip control Compatible with RDMT 1604 indexable inserts Four cutting edges for stable machining Consistent productivity from the 50 mm cutting head The 50 mm diameter and four cutting edges deliver a balanced combination of material removal rate and surface quality, making the tool ideal for frequent facing operations. By accepting RDMT 1604 indexable inserts the cutter simplifies tooling logistics and keeps set-ups consistent across machines. The compact geometry of this milling head promotes steady cutting forces, which supports longer tool life and reduces the need for frequent adjustments — a direct gain in operational efficiency for production and maintenance planners. Secure clamping and straightforward servicing to cut downtime Clamping and insert retention are engineered for rapid, safe handling: the head uses T15 Torx fastening and M4x10 screws to ensure secure clamping of the inserts. With an overall length of 50 mm overall length and a mass of 0.351 kg, the assembly is easy to handle for rapid tool changes without compromising rigidity. The visible screw standardisation shortens maintenance time and keeps replacement parts simple to source, delivering practical benefits at the shopfloor level in the form of reduced machine idle time and quicker changeovers. Designed for practical workshop use with internal coolant benefits Equipped with internal coolant, this face mill supports improved cooling at the cutting edge and more controlled chip evacuation, which helps maintain consistent surface finish during extended runs. The acceptance of indexable inserts keeps operating costs manageable: worn cutting edges are replaced rather than the whole tool, helping workshops and CNC cells keep tooling budgets predictable. As a compact, robust head from Teknik Makina, it integrates easily into standard tool inventories and is especially suited where dependable, repeatable facing performance is a procurement priority. For tailored procurement advice or technical application support for the TekniK Makina 50 mm round indexable face mill (SKU T270-1TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, reliable assistance Technical data SKU: T270-1TM Product type: Round indexable face mill Model designation: for RDMT 1604 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 50 mm Weight: 0.351 kg Cutting edges: 4 Special features Internal coolant: yes Compatibility: RDMT 1604 indexable inserts Screw: M4x10 Torx key: T15 Label: 50mm Rundplattenfräser RDMT 1604 L50mm mit Innenkühlung FAQ Which inserts fit this face mill? The face mill accepts RDMT 1604 indexable inserts; the cutter head is built specifically for that insert geometry and grade range. Is internal coolant supplied through the tool body? Yes, the tool features internal coolant, routed to support cooling at the cutting edge and improved chip evacuation during extended cycles. What fastening hardware is required for insert changes? Insert retention uses T15 Torx screws — specifically M4x10 — for consistent and secure clamping when replacing inserts. How does the tool support quick changeovers? The compact design, standardised screw size and acceptance of RDMT 1604 inserts simplify replacements, reducing downtime compared with non‑indexable solutions. Which manufacturer produces this milling head and what is the SKU? This milling head is from Teknik Makina and is listed under SKU T270-1TM for ordering and inventory purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high‑performance milling head that combines reliable compatibility with easy maintenance — the 50 mm diameter design with five cutting edges and a Ø 22 mm shank delivers stable material removal and short tool changes. Order or request advice through Metav Werkzeuge for fast, dependable delivery and workshop integration. Round face mill T613TM — 50 mm diameter, for RHKW 1204 indexable inserts (Teknik Makina) Round face mill T613TM is a compact cutter designed for heavy finishing and light roughing with RHKW 1204 indexable inserts, suitable for standard milling spindles with a 22 mm shank diameter. 50 mm diameter milling head Fits RHKW 1204 indexable inserts Shank Ø 22 mm for stable clamping Five cutting edges for efficient passes High material removal rates with consistent surface quality The milling head is engineered to provide repeatable chip evacuation and stable cutting forces, which reduces cycle times on serial work. With a 50 mm cutter body and 5 cutting edges, the tool balances feed per tooth and depth of cut to maintain surface quality while improving throughput. The combination of a short overall length and a compact mass keeps runout low; this benefits production runs where process stability and reproducible geometry are essential. Operators and planners will appreciate fewer interrupted cycles thanks to the robust mechanical layout. Quick insert changes and low-maintenance set‑up Fast servicing is supported by the standard clamping and screw specification: clamp screw M3.5, Torx screw M4x10, and Torx key T15. The clamping concept enables precise seating of each insert and straightforward replacement of worn cutters, reducing downtime. Compatibility with RHKW 1204 indexable inserts and alternative acceptance of Ingersoll‑type plates simplifies inventory: a single cutter body can be re‑used across multiple insert lives, lowering toolholder costs and simplifying tool management for maintenance teams. Rigidity and accuracy for repeatable production A Ø 22 mm shank and compact 40 mm overall length deliver the stiffness required for tight tolerance finishing operations. The cutter mass and geometry are tuned to minimise vibration and heat build‑up, increasing insert life and process reliability. For tasks where consistent dimensional control matters, the stable interface between spindle and cutter reduces corrective rework and supports lean production objectives. Technical teams will value the predictable behaviour in both single‑part and batch production scenarios. Versatile integration across common machining tasks Designed as a general‑purpose round face mill, this cutter suits light finishing and medium finishing on a range of ferrous and non‑ferrous components when paired with the appropriate inserts. The compact form factor and modest weight (0.304 kg) allow straightforward use in smaller machining centres and fixture setups where space is limited. Process planners can adopt the tool where incremental performance gains — fewer passes, faster indexing, simpler inventory — help improve overall equipment effectiveness without complex retooling. For tailored tooling solutions and order processing, contact Metav Werkzeuge — technical advice and rapid supply are available directly from Metav Werkzeuge to support integration of the Teknik Cutting Tools T613TM into production workflows (eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930) Technical data Article number: T613TM Name: Rundplattenfräser for RHKW 1204 Indexable Inserts Manufacturer: Teknik Makina SKU: T613TM Weight: 0.304 kg Core technical figures Diameter: 50 mm Cutting edges: 5 Shank diameter (Ø): 22 mm Overall length: 40 mm Special features Fits RHKW 1204 indexable inserts Compatible with Ingersoll inserts Clamp screw: M3.5 Torx screw: M4x10 Torx key: T15 FAQ What inserts does this cutter accept? The T613TM round face mill accepts RHKW 1204 indexable inserts; compatibility with Ingersoll‑type plates is also indicated for flexible inventory use. Which shank size is required for the toolholder? The cutter has a Ø 22 mm shank and an overall length of 40 mm, so a collet or holder matching a 22 mm shank is required for correct clamping. How many cutting edges are provided and what is the benefit? This milling head features 5 cutting edges, which permit higher feed per revolution with improved surface finish compared with fewer‑edge designs. What fastening hardware is supplied or required for inserts? Insert clamping uses a M3.5 clamp screw and a M4x10 Torx screw; the specified key size is T15 for secure, repeatable fastening. Is the cutter suitable for small machining centres? Yes, the compact length and modest weight (0.304 kg) make the cutter suitable for smaller machining centres where space and stiffness are considerations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 50 mm diameter, internal coolant and proven compatibility with RPMT 10T3 inserts for efficient, reliable face milling — order directly via Metav Werkzeuge or ask our consultants for application advice. Teknik Makina round insert milling cutter »T707-1TM« with 50 mm diameter and internal coolant The Teknik Makina round insert milling cutter offers a compact, coolant-fed head for high-productivity face milling with RPMT 10T3 indexable inserts, ideal for mixed production environments and jobbing shops. 50 mm diameter for broad cutting paths Internal coolant channel Fits RPMT 10T3 Korloy inserts Six cutting edges for high productivity High productivity through robust geometry and insert system The milling head is engineered around a stable body and an insert system that accepts RPMT 10T3 indexable inserts, delivering consistent chip control and predictable tool life. With a 50 mm diameter and six cutting edges, the cutter spreads cutting forces and reduces vibration, which translates into smoother surface finish and higher feed rates. The combination of the indexable insert format and the cutter geometry makes changeovers quick and cost-efficient, while maintaining productivity across varying batch sizes. Reliable cooling and secure fastening for longer tool life Equipped with an internal coolant channel, the tool supplies lubricant directly to the cutting zone, lowering temperatures and improving swarf evacuation during heavy cuts. The head uses M3.5x8.5 torx screws with a T15 Torx key for positive clamping of the inserts; this fastening ensures repeatable seat position and stable cutting even under interrupted cuts. These features help to extend insert life and reduce unplanned interruptions in production, supporting a smoother machining workflow. Compatibility, handling and maintenance simplified Designed for use with Korloy RPMT 10T3 inserts, the cutter supports widely available grades and geometries suitable for steel and general-purpose applications. The 40 mm overall length and compact form factor enable installation in standard face milling holders while keeping overhang minimal — a practical advantage for operators aiming to reduce chatter. Routine maintenance is straightforward: inspect screw torque on the T15 drives and check coolant channels for blockage to retain peak performance. Applications and process benefits in everyday production This milling head is tailored for face milling operations where a balance of removal rate and surface quality is required. The six-edge layout offers a consistent material removal rate across mild to moderate depths of cut, making the tool suitable for batch production, component surfacing and semi-finish operations. By combining a compact design with internal coolant and a standard insert format, the cutter reduces tooling complexity and supports faster set-ups on a wide range of machining centres. Contact Metav Werkzeuge for a detailed process consultation on Teknik Cutting Tools' T707-1TM round insert milling cutter with internal coolant — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: T707-1TM SKU: T707-1TM E-class: 21180902 Facts Diameter: 50 mm Overall length: 40 mm Weight: 0.359 kg Cutting edges: 6 Special features Compatible inserts: RPMT 10T3 Insert manufacturer compatibility: Korloy Internal coolant: yes Torx screw: M3.5x8.5 Torx key: T15 Product type: round insert milling cutter (face milling head) FAQ Which inserts are required for this cutter? The cutter is designed for RPMT 10T3 indexable inserts; Korloy inserts in the RPMT 10T3 format are suitable and commonly used with this head. Is the tool suitable for use with internal coolant systems? Yes, the head features an internal coolant channel that feeds the cutting zone directly to improve cooling and chip evacuation. What clamping hardware is used for the inserts? Inserts are secured with M3.5x8.5 torx screws tightened with a T15 Torx key to ensure consistent seating and reliable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, high‑performance milling solution that combines a 50 mm cutting diameter, four replaceable cutting edges and a 22 mm shank for secure toolholder integration; order directly via Metav Werkzeuge or consult the technical team for application support. Round Insert Milling Cutter T290TM — 50 mm diameter, for RDMT 1003 indexable inserts by Teknik Cutting Tools A Round Insert Milling Cutter T290TM designed for precision peripheral milling with RDMT 1003 indexable inserts, suited to compact setups and standard toolholders Compact 50 mm diameter for tight spaces Accepts RDMT 1003 indexable inserts 22 mm shank for secure toolholder fit Four cutting edges for efficient stock removal Precise, compact milling for constrained setups The 50 mm cutter body offers a space‑saving solution where larger cutters would not fit, while the tool’s four cutting edges enable even material removal and extend the service interval between insert changes. Compatibility with RDMT 1003 indexable inserts means the cutting geometry can be restored quickly by replacing the inserts rather than the whole tool, which reduces consumable costs and simplifies workshop logistics. The combination of small cutter diameter and multiple edges is particularly advantageous for series work on components with limited clamping space. Rapid insert replacement and reliable clamping Maintenance is streamlined: insert retention is achieved with a locking screw system (locking screw M3.5) and a dedicated Torx screw (M3.5x8.5) that is tightened with a T15 key, ensuring consistent clamp force and repeatable seating. Indexable inserts are carbide tips mounted on the cutter body, allowing worn cutting edges to be rotated or replaced without regrinding; this practice cuts downtime and keeps process costs predictable. The described screw and key combination supports secure clamping, reducing the risk of insert movement under cutting forces. Stable toolbody and straightforward integration A 22 mm shank diameter provides a robust connection to conventional collets and toolholders, while the compact overall length of 40 mm and low mass (0.31 kg) limit overhang and vibration, improving surface finish and tool life. The tool is supplied for use with standard RDMT 1003 inserts, making it suitable for a range of milling operations where indexable carbide inserts are preferred for their balance of economy and cutting performance. The item is identified under SKU T290TM, enabling easy matching with procurement and tooling lists. For efficient indexable milling with fast insert changes and secure clamping, contact Metav Werkzeuge for a tailored recommendation or technical advice – call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the T290TM and delivery from Emmerich. Technical Data Article number: T290TM Manufacturer: Teknik Makina Product: Round insert milling cutter for RDMT 1003 indexable inserts ECLASS: 21180902 ETIM: EC011860 Dimensions & Performance Diameter: 50 mm Number of cutting edges: 4 Shank diameter: 22 mm Overall length: 40 mm Weight: 0.31 kg Designs & Fastening Compatible inserts: RDMT 1003 Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key size: T15 FAQ What inserts are compatible with this cutter? The round insert milling cutter accepts RDMT 1003 indexable inserts; this insert family is specified for the T290TM and offers replaceable carbide cutting edges. How is the insert secured in the cutter? Insert clamping is performed using a locking screw (M3.5) together with the Torx screw (M3.5x8.5) tightened with a T15 key to ensure secure seating and repeatable positioning. Is the shank suitable for standard holders? The 22 mm shank diameter is compatible with common collets and toolholders designed for 22 mm shanks, providing stable mounting for milling tasks. What benefits do indexable inserts provide compared with solid tooling? Indexable inserts used on this cutter allow worn cutting edges to be rotated or replaced quickly, reducing downtime and lowering consumable costs while maintaining consistent cutting geometry. Which applications suit this cutter best? The cutter is suitable for peripheral milling operations in constrained workspaces where a 50 mm diameter tool with multiple cutting edges delivers efficient material removal and good surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the robust S40T DCKNR design and proven compatibility with CN--1204 indexable inserts to ensure stable external turning and predictable tool life; order the S40T DCKNR boring bar directly via Metav Werkzeuge or ask our consultants if needed. S40T DCKNR boring bar — DCKNR for CN--1204 indexable inserts, 40 mm shaft by Teknik Makina The S40T DCKNR boring bar is a right-hand toolholder designed for external turning operations using CN--1204 indexable inserts, offering a balance of rigidity and accessibility for standard lathe setups. Right-hand cutting direction Compatible with CN--1204 inserts 40 mm shaft diameter 300 mm overall length Robust design for consistent turning performance The bar is engineered to deliver stable chip control and repeatable results in external turning. Its monolithic configuration and the specified 40 mm shaft provide increased stiffness compared with smaller shanks, reducing deflection under load. As a result, the operator benefits from improved diameter accuracy and surface finish with fewer rework cycles. The connection to CN--1204 inserts is optimised for secure seating, which helps maintain cutting geometry across batches and supports consistent cycle times on medium-duty turning operations. Geometry tuned to cutting efficiency and insert life The specified 75° cutting angle and 65 mm cutting height favour effective engagement for many standard turning tasks, enabling controlled chip flow and predictable cutting forces. Right-hand cutting orientation ensures compatibility with prevailing lathe setups and simplifies tool inventory management. By pairing the holder geometry with the appropriate CN--1204 grade, the setup allows for reduced insert wear and longer in-service intervals, translating into lower tooling costs per part and higher uptime on the machine. Dimensioning and handling for workshop integration With an outer 50 mm diameter, a 300 mm overall length and a measured weight of 1.837 kg, the tool balances reach and rigidity for common external operations. The S40T DCKNR form factor fits standard tool posts and clamping arrangements used in industrial workshops; the practical shaft dimensions facilitate secure clamping and straightforward setup. The compact mass assists in controlled handling during changeovers while maintaining sufficient inertia to resist chatter when machining medium sections. Practical benefits for purchasing and supply chain reliability Selecting this toolholder supports predictable lead times and easy replacement of inserts, thanks to the widespread availability of CN--1204 plates. The robust construction reduces frequency of tool changeovers and minimises downtime associated with holder-related failures. For procurement teams, the combination of a recognised ISO designation and clear dimensional data simplifies cataloguing and ensures compatibility checks can be completed quickly, aiding rapid integration into existing tool lists. For delivery and compatibility advice on the Teknik Makina S40T DCKNR boring bar (SKU K405TM), contact Metav Werkzeuge in Emmerich for direct supply and application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: K405TM ISO designation: S40T DCKNR Description: DCKNR for CN-- 1204 Indexable Inserts Brand: Teknik Makina Facts Shaft diameter: 40 mm Diameter: 50 mm Overall length: 300 mm Cutting height: 65 mm Cutting angle: 75° Cutting direction: right Weight: 1.837 kg Special features Compatible with CN--1204 indexable inserts Right-hand cutting orientation Toolholder type: DCKNR Clamping designation: 12 FAQ Which indexable inserts fit this tool? The toolholder is designed for CN--1204 indexable inserts; matching insert grades and chipbreakers should be chosen according to the workpiece material and cutting conditions. Is the cutting direction right-hand or left-hand? This bar is configured for right-hand cutting, suitable for standard external turning on conventional lathes. What are the key dimensions to check for fitting? Important values are the 40 mm shaft diameter, 50 mm overall diameter, and 300 mm overall length—verify these against the machine toolpost and clamp capacity. Can this holder be used for heavy roughing operations? The holder’s stiffness and geometry favour medium-duty turning; for heavy roughing, confirm machine rigidity and insert selection to avoid excessive deflection. What is the SKU and who manufactures the product? The item is supplied as SKU K405TM and manufactured by Teknik Makina; Metav Werkzeuge can advise on stock and delivery options. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust left-hand bar with a 40 mm shaft and 60 mm cutting height for stable, repeatable internal turning; compatible with CN-- 1204 indexable inserts for efficient chip control. Take advantage of the combination of rigidity, reach and insert compatibility for reliable workshop performance. Order the S40T DCLNL boring bar directly via Metav Werkzeuge or ask our consultants if needed. S40T DCLNL Boring Bar (DCLN for CN-- Indexable Inserts) by Teknik Makina — Left-hand, Ø50 mm A left-hand S40T DCLNL boring bar designed for internal turning with CN-- 1204 indexable inserts, offering a balance of rigidity and reach for medium-duty machining tasks. Left-hand cutting orientation Compatible with CN-- 1204 inserts 40 mm shaft for rigid clamping 300 mm overall length for deep reach Greater stability for precise internal turning The design concentrates on rigidity and dimensional stability to reduce vibration during internal machining. A 40 mm shaft provides a stable clamping interface that minimises deflection, improving accuracy and repeatability in serial work. The tool’s mass and geometry help maintain a consistent cutting engagement, which is particularly important when working at reach; this translates into better surface finish and longer insert life compared with less rigid holders. Optimised for CN-- 1204 indexable inserts and chip control The holder is configured as a DCLN style for use with CN-- 1204 indexable inserts, providing straightforward insert indexing and secure clamping. The 95° cutting angle combined with a cutting height of 60 mm ensures correct insert positioning and effective chip formation when used in left-hand cutting operations. This geometry supports predictable cutting forces and helps to avoid unexpected tool deflection, which benefits both component tolerances and throughput. Practical workshop advantages and setup clarity With a 300 mm overall length and a 50 mm body diameter, the bar delivers the reach needed for deeper bores while retaining a compact footprint at the clamping end. The ISO designation S40T DCLNL signals standardised shank and clamping dimensions for compatibility with common toolholders. At a weight of 2.845 kg the holder balances mass for damping without being cumbersome to handle during setup. Clear, consistent geometry reduces setup time and contributes to a smoother production flow. Contact Metav Werkzeuge in Emmerich for technical advice on the Teknik Makina S40T DCLNL boring bar and supply options; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: K484TM Manufacturer: Teknik Makina Product name: Bohrstange — DCLN for CN-- Indexable Inserts ISO designation: S40T DCLNL eClass: 21180806 Numbers / Core technical data Shaft diameter: 40 mm Body diameter: 50 mm Cutting height: 60 mm Overall length: 300 mm Weight: 2.845 kg Cutting angle: 95° Cutting direction: Left Clamping holder designation: 12 Designs / Special features DCLN holder style for indexable inserts Compatible with CN-- 1204 indexable inserts Left-hand cutting orientation Suitable for internal boring applications Brand: Teknik Makina FAQ Which insert size fits this holder? The boring bar accepts CN-- 1204 indexable inserts; the DCLN geometry positions the insert for secure clamping and reliable cutting. Is the tool suitable for left-hand machining only? Yes, the holder is configured for left-hand cutting; the geometry and clamping are optimised for left-hand operations. What are the main dimensions and reach of the bar? The tool has a 40 mm shaft, a 50 mm body diameter and a 300 mm overall length, providing extended reach for deeper bores. What is the ISO designation and how does that help in workshop planning? The ISO designation is S40T DCLNL; this standardisation helps ensure compatibility with common clamping systems and simplifies tool selection and replacement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust ISO shank design, secure compatibility with CN-- 1204 indexable inserts and a compact 300 mm overall length for reliable internal turning performance. Order the boring bar directly via Metav Werkzeuge or contact our consultants for application guidance. Boring Bar S40T DCLNR (DCLN for CN-- indexable inserts) – 40 mm shank, 300 mm overall length | Teknik Makina A Boring Bar S40T DCLNR for right-hand internal turning and facing operations, designed to accept CN-- 1204 indexable inserts and provide stable toolholding in medium-duty machining S40T DCLNR ISO shank design 40 mm shank diameter for stability Compatible with CN-- 1204 inserts 300 mm overall length, 95° cutting angle Stable toolholding for consistent internal turning results The S40T DCLNR holder is engineered for stable machining when using exchangeable carbide faces. With a 40 mm shank and a 300 mm overall length, the design reduces deflection during internal turning, so the operator benefits from consistent bore geometry and improved surface finish. The CN-- 1204 insert interface allows rapid re-indexing or replacement, which keeps cycle times down and tool costs predictable. For workshops that prioritise repeatability, this holder converts insert changes into measurable efficiency gains. Clear compatibility and machining orientation to plan tooling Designed for right-hand cutting and a 95° cutting angle, the holder matches common turning set-ups where approach geometry and clearance are critical. The ISO designation S40T DCLNR signals a standardised shank and clamping arrangement, simplifying tool crib planning and ensuring interchangeability with existing toolposts. Technical buyers will value the clearly defined fit for CN-- 1204 inserts and the avoidance of ambiguous measurements, making procurement and changeover straightforward. Practical advantages that save time at the machine The combination of a substantial shank diameter and a robust cutting height of 60 mm provides a secure platform for indexable inserts, reducing chatter and rework. At a weight of 2.845 kg the holder balances rigidity with manageable handling during set-up. The use of indexable inserts minimises downtime: insert replacement is faster than regrinding, and insert inventory can be optimised for specific workpiece materials and cutting parameters, supporting leaner workshop logistics. Dependable supply and application support from a precision partner Sourcing this holder through Metav Werkzeuge connects the tool choice with a quality filter for the European market. Metav’s broad assortment and experienced advisory service mean the holder is not only a component but part of a dependable machining solution. For procurement officers and workshop managers the clear SKU and ISO labelling reduce order errors and ensure rapid provisioning for production runs that cannot tolerate extended downtime. For tailored application advice or to arrange supply of the S40T DCLNR boring bar contact Metav Werkzeuge in Emmerich by phone or e‑mail for prompt technical consultation and delivery planning Technical data Article number: K404TM Manufacturer: Teknik Makina Facts Shank diameter: 40 mm Cutting height: 60 mm Weight: 2.845 kg Cutting angle: 95° Diameter: 50 mm Overall length: 300 mm Special features ISO designation: S40T DCLNR For indexable inserts: CN-- 1204 Cutting direction: right FAQ Which inserts are compatible with this holder? The holder accepts CN-- 1204 indexable inserts; the S40T DCLNR design accommodates standard CN-- geometry for quick replacement and indexing. Is the cutting orientation right-hand or left-hand? This tool is specified for right-hand cutting, matching turning operations that require a clockwise tool approach. What are the key dimensions and the SKU? Key dimensions: 40 mm shank diameter, 60 mm cutting height, 300 mm overall length, diameter 50 mm; SKU K404TM. Which operations suit this holder best? The holder is intended for internal turning and facing where a rigid shank and indexable insert usage provide efficient material removal and good surface quality. How does the ISO designation help in procurement? The S40T DCLNR ISO label clarifies shank and clamping standards, supporting straightforward replacement, compatibility checks and reduced ordering errors. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid 40 mm shank stability, compatibility with DN--1506 indexable inserts and a 300 mm overall length to achieve reliable left-hand boring operations and consistent surface quality; order directly via Metav Werkzeuge or consult our specialists for application matching. S40T DDQNL Boring Bar – 40 mm shank, left‑hand cutting (Teknik Makina) The S40T DDQNL is a left‑hand boring bar designed for internal turning and boring operations using DN--1506 indexable inserts, offering a balance of rigidity and accessibility for medium‑duty setups. 40 mm shank for rigid set‑up Compatible with DN--1506 inserts Left‑hand cutting orientation 300 mm overall length for extended reach Consistent rigidity for stable internal boring The prominent 40 mm shank delivers structural stiffness that reduces chatter and keeps tool deflection to a minimum during internal operations. With a clearly defined shank diameter and a robust mass of 2.786 kg, the design supports repeatable bore geometry and surface finish. This stability translates into fewer reworks and predictable cycle times when paired with appropriate machine spindle and clamping arrangements. Efficient indexable system for rapid maintenance Designed to accept DN--1506 indexable inserts, the bar enables fast insert changes and economical edge replacement. The indexable concept separates cutting edge wear from the toolholder, which reduces downtime and tooling costs over production runs. The 60 mm cutting height provides sufficient insert support for sustained contact, while the 107.5° cutting angle promotes controlled chip flow and consistent engagement in turning passes. Application fit and orientation explained Left‑hand cutting orientation is specified for machining operations that require tool approach from the opposite direction; this makes the boring bar suited to specialised set‑ups and reversing operations on certain lathes or multi‑axis machines. The 50 mm diameter at the head and the 300 mm overall length offer a compromise between reach and torsional stiffness, allowing use in deeper bores without excessive vibration when correctly supported. Integration into production and procurement The ISO designation S40T DDQNL simplifies compatibility checks with existing toolholding systems and clamping fixtures. For procurement, the clear article number K535TM and manufacturer designation ease inventory and ordering processes. Choosing this tooling through Metav Werkzeuge benefits from a quality filter in Emmerich that supports reliable supply, professional advice and access to a broad range of complementary components for successful integration. Contact Metav Werkzeuge for tailored tooling recommendations and to arrange supply of the Teknik Makina S40T DDQNL boring bar (SKU K535TM) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K535TM Manufacturer: Teknik Makina ISO designation: S40T DDQNL Product type: Boring bar for indexable inserts Facts Shank diameter: 40 mm Cutting height: 60 mm Weight: 2.786 kg Overall length: 300 mm Head diameter: 50 mm Cutting angle: 107.5° Cutting direction: Left Compatible insert: DN-- 1506 Special features For indexable inserts DN--1506 Left‑hand cutting orientation Robust construction for reduced vibration ISO designation for straightforward replacement FAQ Which inserts fit this boring bar? The Teknik Makina S40T DDQNL boring bar is specified for DN--1506 indexable inserts and should be used with inserts matching that designation for correct seating and cutting geometry. What does left‑hand cutting mean for set‑up? Left‑hand cutting indicates the cutting action is oriented for tools approaching the workpiece in the left‑hand direction; the S40T DDQNL must be mounted and oriented accordingly to ensure correct machining forces and chip flow. Is the 40 mm shank suitable for heavy cuts? A 40 mm shank offers increased rigidity compared with smaller diameters, improving resistance to deflection and making the tool appropriate for more demanding internal operations when paired with a stable machine and correct clamping. How deep can this boring bar reach effectively? With a 300 mm overall length and a 50 mm head diameter, the bar provides extended reach for deeper bores while balancing torsional stiffness; final reach capability depends on machine support and bore geometry. Which SKU and designation identify this product? This item is listed as K535TM and carries the ISO designation S40T DDQNL, marketed by Teknik Makina as a boring bar for DN--1506 indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust, vibration-damping design and precise insert compatibility for consistent bore quality; order the S40T DDQNR boring bar directly via Metav Werkzeuge or consult our specialists if technical advice is required. S40T DDQNR Boring Bar (50 mm diameter, 300 mm overall length) — Teknik Makina A S40T DDQNR Boring Bar for right-hand turning, engineered to accept DN-- 1506 indexable inserts and suited to medium-to-heavy metal-removal tasks in CNC turning operations 50 mm cutting diameter for deep reach 40 mm shank for stable clamping Compatible with DN-- 1506 inserts 300 mm overall length for extended reach High-stiffness design for consistent bore quality The S40T DDQNR is built around a 40 mm shank and a reinforced body that improves rigidity; this results in reduced vibration and a marked improvement in surface finish when machining bores. The toolholder geometry and mass distribution produce predictable cutting behaviour, helping to maintain tolerance bands during longer runs. Where tool stability matters, this robust construction supports repeatable accuracy and fewer reworks, translating to more efficient production cycles. Compatibility that reduces downtime and simplifies maintenance Designed specifically for indexable systems, the bar accepts DN-- 1506 inserts with a secure clamping interface and an effective 107.5° cutting angle for controlled chip formation. Quick insert indexing and replacement reduce non-productive time while the standardised insert family ensures spare parts availability. Because the design focuses on ease of service and interchangeability, tool change intervals become a manageable part of planned maintenance rather than an unplanned interruption. Extended reach and reliable handling for workshop throughput With a 50 mm diameter cutting face, 300 mm overall length and a 60 mm cutting height, the bar delivers reach without sacrificing stiffness. The 2.786 kg mass contributes to damping during heavy cuts, and the right-hand cutting direction matches common CNC lathe setups for immediate integration. These mechanical attributes combine to increase cycle stability and lower scrap rates, making the tool suitable for demanding turning operations where consistent productivity is required. For procurement or detailed application advice on the Teknik Cutting Tools S40T DDQNR boring bar (SKU K478TM), contact Metav Werkzeuge for specification assistance and fast supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: K478TM Manufacturer: Teknik Makina ISO designation: S40T DDQNR Article description: DDQN for DN-- Indexable Inserts eClass: 21180806 Dimensions & weight Cutting diameter: 50 mm Overall length: 300 mm Shank diameter: 40 mm Cutting height: 60 mm Weight: 2.786 kg Cutting angle: 107.5° Compatibility & features For indexable inserts DN-- 1506 Right-hand cutting direction Designation (EN): DDQN for DN-- Indexable Inserts Files available: 2 migration IDs FAQ What insert type does this boring bar take? The S40T DDQNR accepts DN-- 1506 indexable inserts; this indexable-insert system provides fast replacement and standardised tooling for production repeatability. Is the bar suitable for heavy cuts in steel? Yes, the S40T DDQNR is designed for medium-to-heavy metal removal; its 40 mm shank and mass provide stability for demanding turning operations. What is the overall length and how does it affect reach? The bar has a 300 mm overall length, offering extended reach for deeper bores while maintaining good rigidity for predictable results. Which cutting direction is supported? This tooling is configured for right-hand cutting, compatible with common CNC lathe setups and standard toolpost arrangements. What is the SKU for ordering and reference? Reference SKU K478TM when enquiring; Metav Werkzeuge can provide availability and technical guidance for the Teknik Cutting Tools S40T DDQNR. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of rigidity, precise indexing and extended reach for reliable internal turning. With a 40 mm shank and 300 mm overall length the tool supports stable, repeatable bore machining; order via Metav Werkzeuge or consult our specialists for application advice. Boring bar S40T DDUNL – indexable-insert boring bar, 40 mm shank, left-hand cut (Teknik Cutting Tools) The Boring bar S40T DDUNL is a left-hand indexable-insert boring bar designed for internal turning tasks where rigidity and fast insert changes are required in workshop and light production environments. 40 mm shank for rigid clamping 300 mm overall length for deep reach Compatible with DN-- 1506 indexable inserts Left-hand cutting orientation for reverse cuts Maximised rigidity and reach for accurate bore machining The S40T DDUNL boring bar offers rigidity through a substantial shank diameter of 40 mm, minimising deflection during heavy cuts and long overhangs. The 300 mm overall length provides extended reach for internal operations while maintaining stability; this combination reduces vibration and improves surface finish. Where repeatable bore diameter and concentricity are critical, the toolholder’s mass and geometry support consistent results across series production without complex setup changes. Fast insert changes and efficient cutting geometry Designed for DN-- 1506 indexable inserts, the holder enables quick insert replacement to keep machine uptime high. The tool’s cutting angle of 93° and a cutting height of 60 mm are configured to offer secure seating and predictable chip flow; this simplifies process planning and reduces scrap. The left-hand cutting orientation allows reverse-direction operations and offers flexibility when paired with compatible tool post arrangements. Overall, the indexable system delivers cost-effective maintenance and predictable tool life. Suited to workshop and small-scale production workflows With a weight of 2.848 kg and robust construction, this boring bar is aimed at engineers and machinists seeking a stable solution for internal turning in general workshop and light industrial settings. The item’s designation and ISO-style naming make it straightforward to match with existing tool inventories and holders. Backed by Teknik Cutting Tools manufacturing practices and the supply reliability of Metav Werkzeuge, the product supports streamlined procurement and integration into mixed-tool environments without unnecessary complexity. Contact Metav Werkzeuge for tailored technical advice on the Teknik Cutting Tools S40T DDUNL boring bar and to arrange prompt supply from our Emmerich distribution centre Technical Data Article number: K494TM ISO designation: S40T DDUNL Brand: Teknik Cutting Tools Facts Shank diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting direction: left Cutting angle: 93° Cutting height: 60 mm Weight: 2.848 kg Compatible inserts: DN-- 1506 Special features Indexable-insert boring bar Designed for internal turning Robust construction for reduced deflection DDUN design for DN-- insert family FAQ Can the boring bar be used for deep internal bores? The S40T DDUNL boring bar is intended for extended reach operations; its 300 mm overall length provides access for deeper internal bores while the 40 mm shank helps control deflection. Which insert type fits this holder? This holder accepts DN-- 1506 indexable inserts; the DDUN geometry secures the insert for stable cutting and straightforward replacement. Is the cutting orientation suitable for reverse-direction turning? Yes, the left-hand cutting orientation is designed for reverse or left-handed turns and is compatible with machines and setups that require such a direction. How does the cutting angle affect performance? The 93° cutting angle supports predictable chip formation and a stable cutting edge engagement, which can improve surface finish and tool life in many internal turning applications. What should be considered when mounting the tool? Ensure a rigid clamping system for the 40 mm shank and verify insert seating for the DN-- series; correct clamping reduces vibration and enhances repeatability for production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of rigidity and clear insert compatibility to maintain steady machining cycles and predictable set-up times; the precise geometry and measurable dimensions support consistent results on external boring operations — order technical tooling through Metav Werkzeuge or consult their specialists for application advice. S40T DDUNR Boring Bar — for DN--1506 Indexable Inserts, ø50 mm, right-hand A S40T DDUNR boring bar engineered for right-hand cutting applications, optimised for external boring with DN--1506 indexable inserts and a compact overall length for workshop versatility Right-hand cutting geometry Compatible with DN--1506 indexable inserts 50 mm outer diameter, 300 mm overall length Shank Ø 40 mm for standard toolholders Increased stability for reliable external boring This boring bar delivers notable stability through its substantial diameter and balanced mass, which is especially valuable when long overhangs are required. The combination of a 50 mm outer body and a shank Ø 40 mm means that bending is reduced and vibrations are damped, so a steady cutting motion is maintained. The measured weight of 2.848 kg contributes to inertia that smooths chip formation; the result is improved surface finish and less rework, which supports higher throughput in repetitive turning tasks. Predictable set-up and fast insert replacement Designed around the widely used DN--1506 insert format, the tool reduces set-up variability and simplifies insert sourcing. The DN--1506 compatibility ensures that cutting edges can be replaced quickly while maintaining the same clamping position and cutting geometry. The right-hand cut and the 93° cutting angle create a chip flow that is predictable under typical turning feeds, which shortens process approval times and lowers the risk of unexpected scrap during production runs. Clear dimensional control for fixture and toolholder planning Key dimensions are provided to assist planning and fixturing: 300 mm overall length, 60 mm maximum cutting height and a defined shank diameter for common holders. These numerical values allow straightforward integration into existing tool setups and CNC programmes. Where tool clearance is critical, the compact overall length helps to keep the centre of gravity closer to the spindle, which is beneficial for reducing runout effects and preserving repeatability across batches. Built for workshop reliability and compatibility Manufactured by Teknik Makina to an ISO-style designation, the bar is intended for consistent mechanical performance and uncomplicated maintenance. The standardised interface for the DN--1506 indexable inserts and the indicated clamp holder size assist with interchangeability across similar tool families. Documentation and marking include the ISO-format designation S40T DDUNR, which helps traceability in tooling inventories and supports predictable procurement cycles. For consistent external boring performance with well-known insert fitment, contact Metav Werkzeuge for application guidance on Teknik Makina tooling and supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K414TM Manufacturer: Teknik Makina Core dimensions Outer diameter: 50 mm Shank diameter: 40 mm Overall length: 300 mm Cutting height: 60 mm Cutting angle: 93° Weight: 2.848 kg Features & compatibility ISO designation: S40T DDUNR Compatible indexable inserts: DN--1506 Cutting direction: Right-hand Clamp holder reference: 15 Suitable for standard external boring toolholders FAQ Which inserts fit this boring bar? The boring bar accepts DN--1506 indexable inserts; the S40T DDUNR interface has been specified to ensure correct seating and clamping for that insert format. Is the cutting direction right-hand or left-hand? This tool is designed with a right-hand cutting geometry and should be used accordingly in compatible toolholders and spindle orientations. What are the key dimensions to check before ordering? Verify the outer diameter (50 mm), shank Ø (40 mm) and overall length (300 mm) to ensure compatibility with existing holders and to calculate overhang and rigidity for the intended operation. How does the 93° cutting angle affect machining? The 93° angle promotes controlled chip direction and stable cutting forces during external boring, which helps to maintain surface finish and repeatable part geometry. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of rigidity and insert compatibility to keep machining runs stable and efficient; the S40T DDWNR boring bar reduces vibration and simplifies insert changes. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Boring bar S40T DDWNR — for DN--1506 indexable inserts, Ø50 mm, right-hand (Teknik Makina) A robust boring bar S40T DDWNR designed for right-hand turning with DN--1506 indexable inserts, suitable for precision internal turning and finishing. S40T shank with 40 mm diameter Suitable for DN--1506 indexable inserts Ø50 mm head diameter Right-hand cutting, 62.5° approach angle Engineered for stability and repeatable results The S40T DDWNR boring bar is designed to deliver rigidity and reduced chatter through a substantial shank diameter 40 mm and a compact head of Ø50 mm. The increased cross-section improves clamping stability in the tool post, which translates into more consistent surface finish and longer life for the indexable cutting edges. The specified cutting angle 62.5° minimises radial loading during right-hand cuts, helping to maintain form tolerances and reduce tool deflection on longer reaches. This combination is particularly valuable on CNC lathes and turning centres where repeatability and cycle-time stability are priorities. Flexible insert system for quick changeovers Compatibility with DN--1506 indexable inserts gives the holder a practical edge in mixed-production environments. The DDWNR geometry supports fast insert replacement and secure indexing, reducing non-productive time and lowering per-part tooling cost. As a right-hand holder, it is configured for standard turning directions while the indexable inserts allow varied edge preparations and grades to be used depending on material and finish requirements. For operations that demand both versatility and predictable chip control, this toolholder form offers a straightforward, cost-effective route to stable turning performance. Practical dimensions that support everyday workshop use With an overall length of 300 mm and a cutting height of 50 mm, the bar provides a useful reach without compromising stiffness; the mass of 2.918 kg contributes to vibration damping during heavier cuts. The ISO designation S40T DDWNR ensures standardised clamping and interchangeability across compatible toolposts, simplifying inventory and setup. This toolholder is suitable for medium-duty internal and external turning tasks where balanced tool geometry and proven insert systems deliver better throughput and less rework. For workshops seeking a robust boring solution, contact Metav Werkzeuge for availability and tailored machining advice — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K466TM Manufacturer: Teknik Makina Data Shaft diameter: 40 mm Cutting height: 50 mm Head diameter: 50 mm Overall length: 300 mm Weight: 2.918 kg Cutting angle: 62.5° Cutting direction: right Special features ISO designation: S40T DDWNR Suitable for DN--1506 indexable inserts Right-hand boring bar Designation (English): DDWNR for DN-- 1506 Indexable Inserts SKU: K466TM FAQ Which inserts fit this toolholder? The bar accepts DN--1506 indexable inserts; the holder geometry and pocket are designed for secure clamping of these inserts in the DDWNR configuration. Is the boring bar suitable for external turning as well as internal operations? Yes, the S40T DDWNR holder is usable for both internal and external turning where its Ø50 mm head and 300 mm overall length provide the necessary reach and stiffness. What does the ISO code S40T DDWNR indicate? The ISO designation S40T DDWNR describes the shank size and the holder style; S40T refers to the shank specification while DDWNR defines the insert pocket and orientation suitable for DN--1506 inserts. How does the 62.5° cutting angle affect machining? A 62.5° approach angle reduces radial forces and improves chip flow for right-hand operations, which helps maintain dimensional stability and surface quality during turning. Can this holder be used on CNC lathes? Yes, the robust shank and standard ISO form make the holder appropriate for CNC lathes and turning centres that accept S40T shanks; the design supports consistent clamping and repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, right‑hand boring bar that pairs secure clamping with compatibility for WN-- 0804 indexable inserts; the combination of a 40 mm shank, 300 mm overall length and 95° cutting angle supports stable turning and consistent chip control — order directly via Metav Werkzeuge or consult the technical team for specification matching. Teknik Makina S40T DWLNR boring bar — tool holder for WN-- 0804 indexable inserts, 40 mm shank, 300 mm length The Teknik Makina S40T DWLNR boring bar is intended for right‑hand turning applications where stiffness, repeatability and insert compatibility are decisive. S40T DWLNR holder for WN-- 0804 inserts 40 mm shank diameter for rigid clamping 300 mm overall length for extended reach Improved process stability through high rigidity and geometry A stable cutting process begins with a robust tool body. The 40 mm shank and the holder geometry minimise vibration and deflection during turning, which translates directly into higher surface quality and longer insert life. The 95° cutting angle is engineered to balance radial and axial forces, helping to reduce chatter in interrupted cuts. By reducing tool movement, the design supports predictable tool life and consistent component tolerances, making it suitable for batch production and demanding single‑piece manufacturing alike. Reliable insert compatibility reduces setup time Compatibility with WN-- 0804 indexable inserts simplifies logistics and speeds changeovers. The holder accepts the standard insert form and secures it with a clamping arrangement indicated by the reference size 08, ensuring repeatable positioning and a constant cutting height of 60 mm. Using standardised inserts means fewer special‑order items, faster setups and easier inventory management. For shops upgrading from brazed tools, this system reduces waste and enables economical replacement of cutting edges without regrinding. Practical dimensions for diverse workshop applications With a 300 mm overall length and an effective diameter of 50 mm, the tool provides reach for deeper bores while maintaining a compact profile for stable turning. At a net weight of 2.82 kg, the bar balances mass for rigidity without imposing excessive load on turret assemblies. The right‑hand cutting orientation suits common turning directions; the holder’s ISO designation S40T DWLNR identifies its shank form and mounting standard, facilitating compatibility checks with lathes and turrets. This combination makes the component a flexible option for general turning and profiling tasks. For demanding turning operations, request the Teknik Makina S40T DWLNR boring bar via Metav Werkzeuge — our specialists at Metav Werkzeuge can confirm machine compatibility and delivery options from Emmerich. Technical data Article number: K424TM Manufacturer: Teknik Makina Facts Shank diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting height: 60 mm Weight: 2.82 kg Cutting angle: 95° Cutting direction: right EClass: 21180806 Special features ISO designation: S40T DWLNR Compatible with WN-- 0804 indexable inserts Clamping reference: 08 Suitable for right‑hand turning Brand: Teknik Makina FAQ Which inserts fit this tool holder? The boring bar is compatible with WN-- 0804 indexable inserts; the S40T DWLNR design secures the insert in repeatable position for consistent cutting performance. What is the shank size and why does it matter? The holder features a 40 mm shank, which increases rigidity and reduces deflection compared with smaller shanks; this improves surface finish and prolongs insert life when using the Teknik Makina boring bar (SKU K424TM). Is the tool suitable for deep‑reach turning? Yes — the 300 mm overall length provides extended reach while the 50 mm diameter and mass support stability during deeper cuts, making it practical for longer bore operations. What cutting direction is supported? This holder is configured for right‑hand cutting; the S40T DWLNR geometry and 95° cutting angle are optimised for right‑hand turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a S40T shank and compatibility with TNMG 1604 indexable inserts for stable, repeatable turning results; the robust 300 mm length and 40 mm shank provide rigidity for demanding set-ups. Order directly via Metav Werkzeuge or ask the consultants for tailored application advice. MTENR for TNMG 1604 Indexable Inserts — Boring bar S40T, right-hand, 40 mm shank (Teknik Makina) The MTENR for TNMG 1604 Indexable Inserts is a right-hand boring bar designed for turning operations using TNMG 1604 indexable inserts, intended for general workshop and industrial lathe applications where insert interchangeability and stable chip control are required S40T shank, 40 mm diameter Compatible with TNMG 1604 inserts 60° cutting angle for versatile turning 300 mm overall length, robust 2.8 kg weight Stable clamping and insert compatibility for reliable production The ISO designation S40T MTENR indicates a secure 40 mm shank suited to standard toolholders; this geometry delivers a predictable connection between machine and tool. With compatibility for TNMG 1604 indexable inserts, insert changes are fast and repeatable, reducing downtime. The 60° approach angle is optimised for common turning tasks, allowing consistent chip formation and easier tool-path programming. This combination supports steady cycle times and reproducible part quality. Rigidity and overhang balance for improved surface finish A 300 mm overall length paired with a 50 mm body diameter and a shank of 40 mm provides a sensible balance between reach and stiffness. The tool’s mass of 2.8 kg contributes to vibration damping in medium-duty operations; lower nuisance vibration helps to maintain surface finish and extends insert life. In practice, shorter overhangs reduce deflection — planning set-ups around the bar’s geometry enables operators to achieve dimensional stability with fewer rework cycles. Efficient machining with predictable cut geometry The 60° cutting angle and 60 mm cutting height yield a well-defined engagement geometry for turning applications, which simplifies process calculations for cutting forces and feed rates. Using standard TNMG inserts keeps tooling inventories compact and simplifies procurement. The right-hand cutting orientation ensures compatibility with most conventional lathes and turning cycles. For production-oriented shops, the result is fewer tool changes, clearer tool life estimation and improved overall throughput. Easy integration into existing toolrooms and maintenance routines The boring bar is deliberately specified to match common holder standards (ISO S40T), so mechanical integration is straightforward and setup time is reduced. Routine maintenance consists of correct torqueing in the clamping system and regular inspection of the insert seat; replacement inserts restore original accuracy without lengthy adjustment. If clarification is needed on holder selection or suitable insert grades, technical advice is available to ensure the component fits the intended machining task and machine capability. For precision turning with TNMG 1604 inserts, contact Metav Werkzeuge for expert advice and delivery from Emmerich – telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K460TM Name: MTENR for TNMG 1604 Indexable Inserts ISO designation: S40T MTENR Manufacturer: Teknik Makina Dimensions / Core data Shank diameter: 40 mm Cutting height: 60 mm Overall length: 300 mm Diameter: 50 mm Weight: 2.802 kg Cutting angle: 60° Cutting direction: right Compatibility / Features For indexable inserts: TNMG 1604 Clamp designation: 16 Right-hand boring bar design S40T shank interface for standard holders FAQ Which inserts fit this boring bar? The MTENR for TNMG 1604 Indexable Inserts is designed specifically for TNMG 1604 inserts; insert interchangeability ensures quick replacement and consistent cutting geometry. Is the bar right- or left-hand cutting? This boring bar is configured for right-hand cutting operations, matching standard right-hand turning cycles on conventional lathes. What are the key dimensions to check for holder compatibility? Check the S40T shank size (40 mm), the overall length of 300 mm, and the clamping interface; these determine holder fit and acceptable overhang. How does the 60° cutting angle affect machining? A 60° approach angle delivers a balance between cutting force distribution and surface finish, suitable for many finishing and semi-finishing turning operations with TNMG inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of rigidity and compatibility: the left-hand design and 40 mm shank ensure secure clamping and steady cutting forces, while compatibility with TNMG 2204 indexable inserts simplifies tooling logistics; order directly via Metav Werkzeuge or consult our specialists for application advice. S40T MTUNL Boring Bar — 40 mm Shank, Left-hand for TNMG 2204 (Teknik Makina) The S40T MTUNL is a left-hand boring bar designed for external turning operations on CNC lathes, optimised to accept TNMG 2204 indexable inserts and deliver stable results in medium to heavy-duty cuts. Stable 40 mm shank for secure clamping Compatible with TNMG 2204 indexable inserts 300 mm overall length for extended reach Left-hand cutting geometry for specific turning tasks Improved rigidity for consistent cycle times The solid design with a 40 mm shank and a 50 mm working diameter provides enhanced stiffness that reduces vibration and extends insert life. This stability translates into repeatable machining and shorter setup times on series production runs, helping to maintain cycle-time targets. The toolholder’s mass of 2.814 kg contributes to damping cutting forces without compromising manoeuvrability, which is particularly beneficial when precision and surface finish are priorities. Designed around common inserts for lower tooling complexity Engineered specifically for TNMG 2204 indexable inserts, the holder simplifies inventory and changeover processes. The S40T MTUNL accepts standard triangular inserts, permitting quick indexing and predictable chip control. The left-hand cutting direction and a 93° cutting angle ensure correct rake and clearance for many external turning tasks; this alignment reduces the need for multiple specialised holders and supports efficient production planning. Practical reach and handling for workshop flexibility With a 300 mm overall length and a defined cutting height of 60 mm, the bar provides the reach required for deeper bores and extended overhangs while remaining suitable for conventional external turning setups. The combination of reach and compatibility enables workshops to tackle a wider range of components without frequent tool changes. Clear specifications reduce programming uncertainty on CNC machines and make tool selection straightforward for operators and planners. Contact Metav Werkzeuge for an application review or to request a tailored quotation for the S40T MTUNL left-hand boring bar — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K530TM Manufacturer: Teknik Makina Name: MTUN for TNMG Indexable Inserts ISO designation: S40T MTUNL Facts Shank diameter: 40 mm Overall length: 300 mm Cutting height: 60 mm Working diameter: 50 mm Weight: 2.814 kg Cutting angle: 93° Compatibility & features Suitable for TNMG 2204 indexable inserts Left-hand cutting direction Intended for external turning on CNC lathes FAQ Is the holder compatible with TNMG 2204 inserts? Yes. The S40T MTUNL boring bar is specifically designed for TNMG 2204 indexable inserts, enabling fast insert changes and predictable chip control. What is the shank diameter and why does it matter? The holder has a 40 mm shank; a larger shank diameter increases rigidity and reduces vibration, improving surface finish and insert life during turning operations. Can the bar be used for deep-reach turning? The 300 mm overall length provides extended reach for deeper turning tasks while maintaining acceptable stiffness for many workshop applications. Which cutting direction does the tool use? This tool uses a left-hand cutting geometry, suitable when the tool must cut in the left-hand direction on the lathe. What mounting information is relevant for CNC setup? Key values for setup are the 40 mm shank, 300 mm overall length and 60 mm cutting height; these dimensions support reliable tool offsets and repeatable positioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, ISO-designated boring bar that combines a 40 mm shank and 60 mm cutting height for stable internal turning and consistent surface finishes; compatible with TNMG 1604 indexable inserts for rapid tool changes. Order or request machining advice via Metav Werkzeuge to integrate this solution into existing CNC processes. Boring bar MTUN for TNMG Indexable Inserts — S40T MTUNR, 40 mm shank (Teknik Makina) The Boring bar MTUN for TNMG Indexable Inserts is a right-hand internal turning tool designed for CNC boring operations, offering robust clamping and compatibility with TNMG 1604 indexable inserts for repeatable results in precision workshops S40T MTUNR construction for stability 40 mm shank for secure clamping Compatible with TNMG 1604 indexable inserts 300 mm overall length, right-hand cutting Consistent bore quality through rigid design The solid construction and S40T MTUNR designation indicate a tool engineered for stability under cutting loads. A 40 mm shank provides increased clamping surface and reduces vibration, which translates into improved dimensional accuracy and longer insert life. For shops aiming to reduce rework and tool changes, this rigidity supports predictable cycle times and repeatable bore diameters. Reliable insert interface for efficient tool changes Compatibility with TNMG 1604 indexable inserts ensures a standardised cutting geometry and straightforward replacement. The 60 mm cutting height allows secure seating of the insert and supports consistent chip evacuation during finishing passes. Using standard TNMG inserts simplifies stocking and makes it easier to maintain surface finish requirements without complex tool adaptations. Shop-floor ergonomics and setup efficiency With an overall length of 300 mm and a 50 mm diameter, the tool balances reach and stiffness for medium-depth bores. The right-hand cutting orientation suits common lathe and mill-turn setups. A compact clamping size of 16 facilitates rapid fixture changes while the item weight of 2.852 kg provides a tangible feel of solid construction without excessive mass. These dimensions help reduce setup time and support lean machining sequences. Suitable applications and recommended use This tool is intended for internal turning and boring operations where standard TNMG inserts are preferred for economy and availability. The design is appropriate for finishing and semi-finishing passes where vibration control and repeatability matter. For specific material recommendations or insert grades, technical advisors at Metav Werkzeuge can propose combinations matched to cycle time and surface specification targets. Request tailored machining advice from Metav Werkzeuge in Emmerich — specify the Teknik Makina MTUN boring bar (K446TM) and receive practical recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K446TM Manufacturer: Teknik Makina Item name: MTUN for TNMG Indexable Inserts ISO designation: S40T MTUNR Key dimensions Shank diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting height: 60 mm Weight: 2.852 kg Cutting direction: right Cutting angle: 93° Compatibility and features Compatible inserts: TNMG 1604 Clamping holder size: 16 Product type: boring bar Suitable for indexable insert turning operations FAQ What insert type does the boring bar accept? The MTUN boring bar accepts TNMG 1604 indexable inserts, enabling quick index and replacement while maintaining consistent cutting geometry. Is this boring bar right- or left-hand? The tool is configured for right-hand cutting, suitable for standard lathe operations and many CNC turning centres. What are the key dimensions for fixture planning? Key dimensions are shank diameter 40 mm, overall length 300 mm, and cutting height 60 mm, which should be considered when specifying holders and clamping fixtures for the K446TM. Can the bar be used for deep bores? With a 50 mm diameter and a 300 mm overall length, the bar is best suited to medium-depth bores; deep boring may require evaluation of stiffness and vibration for the specific setup. Which manufacturer produced this boring bar and what is the SKU? This boring bar is from Teknik Makina and listed under SKU K446TM; the ISO designation is S40T MTUNR Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust shank design, precise cutting geometry and straightforward insert compatibility to maintain steady production and predictable machining results; order via Metav Werkzeuge or consult the technical team for application recommendations. Teknik Makina Boring Bar S40T MWLNL – 50 mm diameter, 300 mm overall length The Boring Bar S40T MWLNL is a left-hand, indexable-insert boring bar engineered for turning operations using WN-- 0804 inserts, offering a rigid shank and defined cutting geometry for reliable material removal in workshop environments Solid S40T shank, 40 mm diameter 50 mm cutting diameter for extended reach Compatible with WN-- 0804 indexable inserts Greater rigidity for consistent bore accuracy The S40T MWLNL designation and a shank diameter 40 mm combine to provide a stable mounting that reduces vibration during cutting. With a cutting diameter 50 mm and overall length 300 mm, the tool offers an effective balance between reach and stiffness, which helps to preserve bore tolerances. The bar’s mass (approx. weight 2.841 kg) contributes to steady cutting dynamics, so interruptions caused by chatter are minimised and predictable surface finishes are achieved. Controlled chip flow and efficient insert use A cutting height 60 mm and a cutting angle 95° support secure seating of indexable inserts and foster consistent chip control. The left-hand configuration (left-hand cut) suits operations arranged for counter-rotation applications or specific machine set-ups. Using standard WN-- 0804 inserts simplifies tooling logistics and reduces changeover complexity, enabling shorter set-up times and a clear path to stable cycle times. Straightforward integration and dependable tooling supply The bar follows the S40T style for shank attachments and is supplied in a format compatible with common clamp holders (designation 08), facilitating rapid installation into existing toolholders. Identification is clear with ISO designation S40T MWLNL and SKU K514TM, making procurement and stock management uncomplicated. For operations prioritising repeatability and ease of maintenance, this indexable-insert boring bar is a pragmatic choice that aligns with workshop demands and modern production flows. For tailored tooling advice or to source the Teknik Cutting Tools boring bar, contact Metav Werkzeuge for application guidance and supply options Technical data SKU: K514TM Manufacturer: Teknik Makina ISO designation: S40T MWLNL For inserts: WN-- 0804 Numbers / Core technical data Shank diameter: 40 mm Cutting diameter: 50 mm Cutting height: 60 mm Overall length: 300 mm Weight: 2.841 kg Cutting angle: 95° Cutting direction: left Special features Compatible with WN-- 0804 indexable inserts Left-hand cut configuration Clamp holder designation 08 Designed for indexable-insert turning operations FAQ What insert type is required for this bar? The bar accepts WN-- 0804 indexable inserts; the design and cutting height 60 mm ensure stable seating for this insert format. Is the bar suitable for extended overhangs? The shank diameter 40 mm and overall length 300 mm provide a trade-off between reach and rigidity; longer overhangs will reduce stiffness and should be assessed against the machining task. What does S40T MWLNL signify? S40T MWLNL is the ISO designation that describes the shank style and configuration of the boring bar, indicating compatibility with standard toolholders and the left-hand cutting version. Can the bar be mounted in standard clamp holders? Yes; the product details include clamp holder designation 08, enabling installation in compatible holders without special adaptations. How is chip control addressed with this tool? The combination of cutting angle 95°, defined cutting height and the use of indexable inserts promotes consistent chip formation and evacuation, supporting uninterrupted cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid, left-hand PCLN boring bar that accepts CNMG 1204 inserts and delivers stable cutting thanks to a 40 mm shank and 300 mm overall length; order directly via Metav Werkzeuge or consult the Metav team for application advice. Boring bar PCLN for CNMG Indexable Inserts (S40T PCLNL) — left-hand, Ø50 mm A robust PCLN for CNMG Indexable Inserts boring bar designed for external turning where left-hand cutting and reliable insert clamping are required. Left-hand cutting direction Accepts CNMG 1204 inserts Shaft Ø40 mm for stable clamping No internal coolant — external use Engineered for rigidity and consistent chip control The bar’s shaft Ø40 mm and overall length 300 mm provide a stiff toolholder that reduces vibration and improves surface finish. With a cutting height of 55 mm and a mass of 1.825 kg, the assembly maintains cutting stability even under intermittent loads. For production environments this means fewer rejects and more predictable tool life, as the toolholder geometry minimises deflection and supports consistent chip evacuation when paired with the correct CNMG insert geometry. Insert compatibility and cutting geometry for efficient turning Designed specifically for CNMG 1204 indexable inserts, the tool uses a standard insert form that is widely available and economical to replace. The tool’s cutting angle 95° and ISO designation S40T PCLNL ensure correct seating and orientation of the carbide insert, delivering repeatable cutting geometry. This alignment simplifies setup on lathes and reduces indexing time, helping to keep cycle times predictable while maintaining the required dimensional tolerances. Coolant-free design for straightforward maintenance The boring bar is supplied without internal coolant, which removes internal channels and simplifies cleaning and inspection. For operations that use external coolant or dry machining, this reduces potential clogging points and eases maintenance routines. The absence of internal coolant also means fewer sealing elements to monitor, making the tool a practical choice for shops that prefer external coolant application or dry-turning strategies. Integration and procurement for production workflows The tool is identified by SKU P354TM and the ISO code S40T PCLNL, easing part-number management and reordering across procurement systems. As a left-hand tool intended for external turning, it integrates with standard clamping systems that accept a shaft Ø40 mm. Technical documentation and dimensions are straightforward to verify during tool setup, which supports consistent machine-to-machine interchangeability and simplifies tool crib inventory management. Contact Metav Werkzeuge today for tailored advice on Teknik Cutting Tools boring bars—quote SKU P354TM for application recommendations and procurement assistance Technical data SKU: P354TM Manufacturer: Teknik Makina ISO designation: S40T PCLNL Type: PCLN for CNMG Indexable Inserts Cutting direction: left Special feature: without Coolant Measurements Diameter: 50 mm Shank diameter: 40 mm Cutting height: 55 mm Overall length: 300 mm Weight: 1.825 kg Cutting angle: 95° Features / Compatibility For CNMG 1204 inserts Left-hand toolholder No internal coolant (external use) ISO-compatible toolholder form FAQ Which inserts fit this boring bar? The boring bar accepts CNMG 1204 indexable inserts; compatibility is ensured by the PCLN pocket and ISO designation S40T PCLNL used on the Teknik Cutting Tools bar (SKU P354TM). Is the bar suitable for internal coolant? No, the tool is supplied without internal coolant and is intended for external coolant application or dry machining as specified for this left‑hand boring bar. What are the critical dimensions for setup? Key setup dimensions include shaft Ø40 mm, overall length 300 mm, cutting height 55 mm and tool diameter 50 mm; these values support stable clamping and correct insert positioning. Can this bar be used for roughing and finishing? The robust shank and insert compatibility make the bar suitable for both roughing and finishing operations when paired with the appropriate CNMG grade and cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the S40T PDUNL construction with a 40 mm shank and 55 mm cutting height for improved stability and consistent chip control; the left-hand orientation and compatibility with DNMG 1506 inserts make it suitable for demanding external turning tasks. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. S40T PDUNL Boring Bar — left-hand, for DNMG 1506 inserts (Teknik Makina) S40T PDUNL Boring Bar is a robust left-hand indexable insert holder for external turning operations, engineered for secure clamping and reliable performance with DNMG 1506 inserts. S40T PDUNL holder for DNMG 1506 inserts 40 mm shank diameter for stable clamping 55 mm cutting height for deep cuts 300 mm overall length, 50 mm head diameter Stable construction for repeatable turning results The S40T PDUNL combines a rigid 40 mm shank with a substantial 50 mm head diameter to minimise vibration and maintain tool life under load. The design focuses on mechanical stability: a heavier, well-damped holder reduces chatter and supports consistent tool engagement, which directly improves surface finish and dimensional control. Compatibility with DNMG 1506 indexable inserts allows fast insert changes and predictable cutting performance, lowering downtime in serial production. Defined geometry for controlled cutting and chip flow With a 93° cutting angle and left-hand orientation, the toolholder is tailored for specific turning directions and approaches on the lathe. The geometry helps to direct chips away from the workpiece and to distribute cutting forces evenly across the insert edge, which benefits both tool life and operator safety. The 55 mm cutting height is providing ample support for the insert pocket, enabling medium to heavy cuts while maintaining repeatable results. Workshop fit and practical handling The holder’s 300 mm overall length and solid mass (approx. 2.79 kg) make it suitable for overhung setups where rigidity is essential. The standard ISO designation S40T PDUNL ensures straightforward identification and interchangeability in tool inventory. Installation is carried out via the machine’s toolpost or turret, matching the holder’s 40 mm shank to the appropriate clamp or boring bar seat. For consistent performance, pair the holder with the recommended DNMG inserts and set clamping torque according to machine tool guidelines. Choose the Teknik Cutting Tools S40T PDUNL for robust left-hand external turning — contact Metav Werkzeuge in Emmerich for tailored technical advice and reliable supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: P314TM Manufacturer: Teknik Makina Designation: Boring bar PDUN for DNMG indexable inserts ISO designation: S40T PDUNL Cutting direction: left Facts Shank diameter: 40 mm Cutting height: 55 mm Weight: 2.79 kg Cutting angle: 93° Head diameter: 50 mm Overall length: 300 mm Special features Compatible inserts: DNMG 1506 For indexable insert holder PDUN type Left-hand (PDUNL) orientation SKU: P314TM FAQ Which inserts fit this holder? The S40T PDUNL accepts DNMG 1506 indexable inserts; this combination (Teknik Makina S40T PDUNL, SKU P314TM) is intended for external turning with standard DNMG geometry. Is the holder left- or right-hand? This toolholder is left-hand oriented (PDUNL), designed for operations where a left-hand approach to the workpiece is required. What are the key dimensions to check before fitting? Check the 40 mm shank diameter, 300 mm overall length and the 50 mm head diameter to ensure compatibility with the machine tool turret or clamping system. For which applications is this holder recommended? The holder is suited to medium and heavy external turning tasks where improved rigidity and reliable chip control are needed; it performs well in serial production and workshop environments. How does the cutting angle affect performance? The 93° cutting angle provides stable cutting engagement and assists in directing chips away from the cutting zone, which helps to prolong insert life and achieve consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping and clear compatibility: the boring bar pairs a 40 mm shank with a 50 mm diameter and a 300 mm overall length to deliver stable turning with DNMG 1506 inserts. For supply and product queries, order directly via Metav Werkzeuge or consult the technical team for application guidance. Boring bar PDUN for DNMG indexable inserts — S40T PDUNR, 40 mm shank (Teknik Makina) The Boring bar PDUN for DNMG indexable inserts is a right-hand turning tool designed for medium to heavy turning operations using DNMG 1506 indexable inserts, offering extended reach and standard ISO identification for streamlined tool management. 40 mm shank diameter for secure clamping Compatible with DNMG 1506 indexable inserts 300 mm overall length for extended reach Right-hand cutting with 93° cutting angle Consistent clamping for vibration‑reduced turning The S40T PDUNR is built around a 40 mm shank, providing a rigid connection to the holder that reduces chatter and improves surface finish. With a solid mass of 2.79 kg, the tool offers inherent stability during heavier cuts, which helps maintain tolerances and extend insert life. The ISO designation simplifies inventory and ensures compatibility with standard toolholder systems, delivering repeatable setup times and predictable machining behaviour. Extended reach without compromising rigidity Designed with a 300 mm overall length and a 50 mm diameter, this bar balances reach and stiffness for access into deeper bores or overhung turning operations. The geometry reduces deflection compared with slimmer tools, permitting more consistent material removal rates. The increased 55 mm cutting height provides secure support for DNMG 1506 inserts, allowing effective chip control and steady engagement even when cutting at moderate depths. Fast indexable-insert changes for production continuity Prepared for DNMG 1506 indexable inserts, the toolholder enables quick replacement of cutting edges to minimise downtime. Using standard DNMG inserts keeps tooling costs manageable while allowing a wide choice of grades for different materials. This arrangement supports a cost-effective workflow: worn edges are swapped quickly, restoring cutting performance without lengthy regrinds or special fixtures. Predictable cutting geometry for reliable results The tool features right‑hand cutting orientation and a 93° cutting angle, which provides a controlled approach to the workpiece and consistent chip formation on standard turning tasks. Such geometry aids in achieving repeatable dimensional accuracy and surface integrity across serial production. The clear, standardised labelling (S40T PDUNR) assists workshop logistics and ensures compatibility checks can be completed at a glance. For specification checks or to arrange supply of the Teknik Makina S40T PDUNR boring bar, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: P304TM Manufacturer: Teknik Makina ISO designation: S40T PDUNR Product name: PDUN for DNMG indexable inserts Facts Shank diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting height: 55 mm Weight: 2.79 kg Cutting angle: 93° Special features Compatible with DNMG 1506 indexable inserts Right-hand cutting direction PDUN tool geometry for indexable inserts SKU: P304TM FAQ What insert type fits this toolholder? The S40T PDUNR boring bar accepts DNMG 1506 indexable inserts; the PDUN geometry is designed specifically for that insert form. Is the tool suitable for deep bore turning? With a 300 mm overall length and a 50 mm diameter, this boring bar provides extended reach while maintaining rigidity for moderate-depth turning tasks. Which cutting direction is specified for this bar? The tool is manufactured for right-hand cutting and features a 93° cutting angle to deliver controlled engagement and predictable chip flow. How does the shank size affect clamping stability? The 40 mm shank offers a secure clamping interface that reduces vibration and helps preserve insert life under heavier cutting conditions. What is the SKU for ordering or stock reference? The product is listed under SKU P304TM and is identified by the ISO designation S40T PDUNR for clear inventory handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High rigidity from the S40T shank and precise insert seating deliver stable machining with predictable chip control; the 95° cutting angle and right‑hand geometry support secure engagement in typical turning operations. Order the P364TM boring bar directly via Metav Werkzeuge or consult their specialists for integration and availability advice. P364TM — Boring bar S40T PWLNR for WNMG 0804 (Right‑hand, 95°) The P364TM is a right‑hand boring bar with an S40T shank, designed for turning operations using WNMG 0804 indexable inserts and intended for stable, repeatable metal‑removal tasks Right‑hand cutting direction Fits WNMG 0804 indexable inserts 40 mm shank diameter, 300 mm overall length 95° cutting angle for secure engagement Rigidity and predictable cutting performance for production use The S40T shank and the S40T PWLNR ISO designation provide a compact, stiff holder that reduces deflection under load. With a 40 mm shank diameter and 300 mm overall length, the toolholder sustains radial forces while maintaining repeatable seating of the insert; this leads to consistent part geometry and extended insert life. Specified mass and dimensions (weight 2.45 kg, cutting height 60 mm) enable planners to account for tool‑holder dynamics when programming spindle speeds and feeds. The result is measurable process stability and fewer reworks in batch production. Compatibility and machining benefits with WNMG 0804 inserts Engineered for WNMG 0804 indexable inserts, the holder accepts an industry‑standard insert format that simplifies stocking and changeover. The 95° cutting angle and right‑hand orientation promote positive engagement and controlled chip flow on typical turning tasks; this geometry is particularly useful where a secure approach angle reduces vibration and improves surface finish. For shops standardising on negative‑geometry turning inserts, the toolholder integrates directly into existing workflows and CAM setups without adapting insert geometry. Practical advantages for workshop integration and maintenance The toolholder’s nominal 50 mm diameter at the working end and its standard ISO naming make procurement and tool management straightforward. The design minimises setup time because insert clamping and seat alignment follow established conventions for PWLN‑style holders. As a product from Teknik Cutting Tools utilised via Metav Werkzeuge’s distribution, the assembly benefits from warehouse availability in Emmerich and advised compatibility checks where specific machine interfaces or clearances are constrained. Routine inspection is limited to insert seating and clamp torque, keeping maintenance effort low while ensuring reliable production output. For technical advice and availability of the Teknik Cutting Tools P364TM boring bar, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P364TM SKU: P364TM ISO designation: S40T PWLNR Type: PWLN for WNMG indexable inserts Brand: Teknik Makina Dimensions Shank diameter: 40 mm Overall length: 300 mm Diameter: 50 mm Cutting height: 60 mm Weight: 2.45 kg Compatibility & Features Suitable for: WNMG 0804 inserts Cutting direction: Right‑hand Cutting angle: 95° ECLASS: 21180806 Files: 62de7e450f56dbb4de4dbefd, 62de7edf33927e49dbf32787 FAQ Which insert type fits this toolholder? The P364TM accepts WNMG 0804 indexable inserts; the holder is specified for PWLN‑style clamping compatible with that insert size. Is the cutting direction right‑hand or left‑hand? This toolholder is built with a right‑hand cutting direction and the ISO code indicates a right‑hand configuration. What are the key dimensions to check before fitting? Confirm the 40 mm shank diameter, 300 mm overall length and the 50 mm working diameter against turret clearance and toolpost capacity. What is the benefit of the 95° cutting angle? A 95° cutting angle provides secure engagement and stable contact at the cutting edge, improving surface finish and reducing chatter in many turning applications. Who manufactures and supplies the tool? The tool is produced by Teknik Cutting Tools and supplied through Metav Werkzeuge; for ordering and technical integration details consult Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com