Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a robust combination of stability and compatibility: the cutter's Ø63 mm diameter and 25 mm shank deliver secure clamping and repeatable performance, while the indexable insert system (MGM 4C, Korloy-compatible) enables quick, economical tool servicing — order via Metav Werkzeuge or consult our specialists for application advice T-slot cutter TKC304TM — T-slot milling cutter with Ø63 mm and 25 mm shank (Teknik Cutting Tools) The T-slot cutter TKC304TM is a round milling cutter designed for precision machining of T-slots and dovetail channels in CNC machining centres, delivering secure seating for MGM 4C indexable inserts and compatibility with Korloy insert ranges Ø63 mm cutting diameter 25 mm solid shank for secure clamping Accepts MGM 4C / Korloy indexable inserts 2 cutting edges for efficient material removal Consistent cutting performance through secure shank and geometry The tool's 25 mm shank and balanced geometry provide axial rigidity and stable tool life during prolonged machining cycles. With a cutting diameter of Ø63 mm and a cutting height of 4 mm, the cutter enables controlled engagement depth, reducing vibration and helping to maintain concentricity in repetitive T-slot operations. The presence of 2 cutting edges concentrates material removal into fewer, stronger flutes, which supports predictable cycle times and repeatable slot quality. These design choices translate into measurable process reliability for production-focused shops that demand consistent tolerances. Fast insert changes and predictable clamping for lower operating cost This milling cutter accepts MGM 4C indexable inserts and is specified as compatible with Korloy inserts, allowing users to select widely available grades and geometries. The insert is secured with an M8 Torx screw, tightened with the supplied Allen key 6, ensuring a consistent clamping torque and repeatable seat location after each replacement. Indexable inserts mean worn cutting edges can be exchanged without regrinding the tool body, which simplifies inventory and reduces per-edge cost, particularly in high-volume or multi-shift environments. The modular insert system also supports quicker set-up times during tool changes. Practical integration into machining centres and accessible reach With an overall length of 120 mm and a cutter-to-shank distance of 19.25 mm, the tool offers sufficient reach for standard T-slot profiles while keeping the unsupported length minimal for reduced deflection. The cutter's mass of 0.556 kg reflects a compact, serviceable design that is straightforward to handle during tool preparation and mounting. The round milling cutter form factor fits common toolholders and collet systems used in modern CNC equipment, making the tool a practical addition to workshop stocks where predictable mounting, balance and runout control are priorities. The TKC304TM's configuration supports both repeatable setup and straightforward maintenance routines. For reliable T-slot production and specialist advice on the Teknik Cutting Tools T-slot cutter TKC304TM, contact Metav Werkzeuge for ordering and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKC304TM Manufacturer: Teknik Makina Name: T-slot cutter (T-Nut Fräser) Facts Diameter: Ø63 mm Shank diameter: 25 mm Cutting height: 4 mm Number of cutting edges: 2 Overall length: 120 mm Cutting-to-shank distance: 19.25 mm Weight: 0.556 kg Torx screw: M8 Special features Accepts MGM 4C indexable inserts Compatible with Korloy inserts Round milling cutter design Secured with Allen key size 6 FAQ What insert type does this cutter use? The cutter uses MGM 4C indexable inserts and is compatible with Korloy insert grades for flexible edge selection. Is the shank size suitable for standard collets? Yes, the 25 mm shank is compatible with common 25 mm toolholders and collet systems used in CNC machining centres. How many cutting edges does the tool have and what does that mean for cutting? The tool has 2 cutting edges, which concentrates cutting forces on fewer flutes for stable chip formation and predictable material removal in T-slot operations. Which fastening hardware is supplied for the insert? The insert is secured with an M8 Torx screw and is tightened using an Allen key 6 for consistent clamping torque. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com

Take advantage of a compact tooling solution that combines sturdy shank stability, standard indexable insert compatibility and precise T-slot cutting for reduced setup time. The design pairs a 63 mm cutting diameter with a 25 mm shank for reliable rigidity, while compatibility with common indexable inserts keeps consumable costs low — order or enquire via Metav Werkzeuge for tailored advice. T-Nut Cutter S072TM — T-slot cutter, 63 mm diameter, DCMT-compatible A robust T-slot cutter, T-Nut Cutter S072TM, built for producing precise T-nuts and grooves in milling operations with standard indexable inserts Precision T-slot cutting for repeatable fittings Compatible with DCMT 11T3 indexable inserts 63 mm diameter for deep, stable cuts 25 mm shank for rigid toolholding Increase throughput with a stable cutter geometry The cutter’s 63 mm diameter and stout 25 mm shank deliver a combination of rigidity and reach that reduces vibration and enables higher, more consistent feed rates. By improving mechanical stability during machining, the tool supports shorter cycle times and fewer rejected parts; this is an efficiency gain that directly translates into higher throughput for series production. The overall tool geometry is optimised for producing repeatable T-slots, so changeovers become faster and machining parameters stay more predictable. Lower tooling costs through standard insert compatibility Featuring support for DCMT 11T3 indexable inserts and geometries specified as 55° for DCMT and 35° for VBMT, the cutter uses widely available insert types to reduce inventory complexity. The use of common inserts means replacement is quick and inexpensive compared with bespoke solutions, and carbide insert options offer balanced wear performance. For operations seeking predictable tool-change procedures and minimal downtime, the insert system provides a practical cost-benefit while maintaining surface quality and slot accuracy. Designed for secure seating and simple maintenance With four cutting edges and a clear fastener pattern, the cutter ensures stable insert clamping and easy maintenance. The supplied fastening arrangement uses a Torx screw M3.5x9 and a T15 key, which standardises the tightening process and ensures repeatable clamping torque. This arrangement reduces the risk of insert movement under load and makes routine servicing straightforward on the shop floor. The overall construction and fastener choice support long-term repeatability without specialised tooling. Practical setup guidance and quality assurance The cutter’s 120 mm overall length and 40 mm cutting length make it suitable for a range of T-slot depths while retaining sufficient tooloverhang control. When pairing the cutter with suitable cutting parameters and a secure toolholder, the operator benefits from improved dimensional consistency and a cleaner surface finish. For best results, match the insert geometry to the material and machine capability; those seeking specific cutting data for unusual workpiece alloys or novel setups should consult the technical team at Metav Werkzeuge for application-specific guidance. For application advice or to discuss a tailored tooling package, contact Metav Werkzeuge — their specialists in precision tooling will assist with selection, compatible inserts and procurement from Emmerich. Technical data Article number: S072TM Manufacturer: Teknik Makina Item name: T-Nut Cutter Compatible inserts: DCMT 11T3 Insert angles: 55° for DCMT and 35° for VBMT Facts Diameter: 63 mm Cutting edges: 4 Overall length: 120 mm Shank diameter: 25 mm Cutting length: 40 mm Weight: 0.536 kg Cutting angle: 55° Special features For indexable inserts DCMT 11T3 Torx screw M3.5x9 Torx key T15 Designed for repeatable T-slot machining FAQ Which indexable inserts fit this cutter? The T-Nut Cutter S072TM accepts DCMT 11T3 indexable inserts and is dimensioned to work with those geometries for reliable T-slot profiling. How many cutting edges does the tool have and what is the effective cutting length? The tool features 4 cutting edges and an effective cutting length of 40 mm, giving a good balance between material removal and slot depth capability. What shank size is required for secure toolholding? A 25 mm shank is specified for the cutter; using a matched, high-rigidity toolholder improves repeatability and surface finish when machining T-slots. Which fastening components are needed for insert replacement? Insert clamping uses a Torx screw M3.5x9, tightened with a T15 key, ensuring consistent clamping torque and simple maintenance routines. Is the cutter suitable for deep T-slots or limited-access pockets? With a 63 mm diameter and 120 mm overall length, the cutter is suited to moderate-depth T-slots; for deeper or very narrow pockets, verify reach and clearance against the specific workpiece geometry Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T‑slot machining with high productivity and low downtime: the cutter's 63 mm cutting diameter combined with eight cutting edges delivers efficient material removal, while the 32 mm shank ensures rigid clamping for consistent slot geometry. Order the tool directly via Metav Werkzeuge or consult the specialists for application-specific advice. T-slot cutter — 63 mm diameter, 8 cutting edges — Teknik Makina The T-slot cutter is a specialised milling tool for producing precise T-slots and T-nut grooves in milling operations, suitable for use with indexable inserts such as SPMG 07. 63 mm cutting diameter for wide T-slots Eight cutting edges for smooth material removal Accepts SPMG 07 indexable inserts 32 mm shank diameter for stable clamping Higher throughput from robust geometry and more cutting edges The tool's 63 mm cutting diameter and eight cutting edges are engineered to increase material removal rates without sacrificing finish quality. Multiple cutting edges distribute cutting forces, which reduces load peaks and supports longer tool life when combined with proper feed rates. The cutter's cutting height 10 mm provides the necessary engagement to form standard T‑nut profiles in a single pass where machine rigidity allows, cutting cycle times and simplifying process planning for production engineers and workshop managers. Insert system for quick service and predictable costs This milling head uses SPMG 07 indexable inserts and is compatible with Taegutec insert types, enabling economical replacement and rapid on‑machine changes. Inserts are secured with a M2.5x7 Torx screw, loosened and tightened with a T8 key, allowing repeatable seating and minimal downtime during insert changes. The indexable insert approach reduces tooling spend compared with solid cutters, since only the cutting segments are replaced; this supports predictable cost-per-part calculations and straightforward maintenance planning. Stable clamping and straightforward integration into production A 32 mm shank and overall length of 120 mm give the cutter the axial reach and rigidity required for many milling set‑ups while keeping overhang moderate. The tool's configuration—shaft cutting length 45 mm and cutting diameter 63 mm—is suited to milling stations that require reliable T‑slot form and repeatability. The robust design and clearly defined fixing hardware support integration into existing tool holders and milling heads, making the cutter a pragmatic choice for industrial workshops and jobbing mills seeking consistent slot geometry and process stability. For precise T‑slot production and application-specific recommendations, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — for technical guidance and supply from the Emmerich facility Technical data Article number: TKC068TM Manufacturer: Teknik Makina Designation: T-slot cutter Key dimensions Cutting diameter: 63 mm Number of cutting edges: 8 Overall length: 120 mm Cutting height: 10 mm Shank diameter: 32 mm Shank cutting diameter: 31.5 mm Shaft cutting length: 45 mm Weight: 0.868 kg Features and compatibility Indexable inserts: SPMG 07 Compatible insert supplier: Taegutec Torx screw: M2.5x7 Torx key size: T8 Intended use: T-slot / T-nut machining SKU: TKC068TM FAQ Which inserts fit this cutter? This cutter accepts SPMG 07 indexable inserts and is compatible with Taegutec SPMG variants for straightforward replacement. What are the cutter's diameter and number of cutting edges? The tool offers a 63 mm cutting diameter with eight cutting edges, designed to balance cutting speed and surface finish. What shank size is required for mounting? A 32 mm shank is specified for stable clamping; the cutter's dimensions support common tool holders used in production milling. How are the inserts secured and replaced? Inserts are fastened with a M2.5x7 Torx screw and require a T8 key for removal and installation, ensuring repeatable seating and quick service intervals. For which operations is this cutter intended? The cutter is intended for milling T-slots and T-nut grooves where indexable inserts are preferred for maintenance economy and high cycle throughput. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 63 mm cutting diameter, compatibility with MGMN 300 indexable inserts and the stiff Ø25 mm shank for secure clamping and repeatable T-slot production — order the tool directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC288TM (63 mm) for MGMN 300 indexable inserts by Teknik Makina T-slot cutter designed for producing precise T-slots in milling operations using MGMN 300 indexable inserts, suited to industrial and workshop CNC setups 63 mm cutting diameter Compatible with MGMN 300 inserts 25 mm shank diameter (Ø25 mm) M16 mounting thread Precise geometry for consistent T-slots and fewer reworks The robust design ensures a predictable slot profile on every pass: the 63 mm diameter and matched insert geometry create repeatable results that reduce rework. Compatibility with MGMN 300 indexable inserts delivers cost-efficient cutting — when a cutting edge wears, the insert can be rotated or replaced without reconditioning the entire tool, preserving cutting accuracy and saving machine time. The result is steadier throughput and reduced process variability for batch and single-part production. Fast indexable-insert changes to boost uptime Using standard MGMN 300 inserts from recognised manufacturers such as Korloy means replacement is quick and straightforward. The tool accepts 2 cutting edges with a 3 mm cutting-edge height, allowing controlled material removal while extending the service life of each insert. This modular approach reduces consumable costs and keeps maintenance simple, so machining centres can return to production faster after routine servicing. Stable mounting and integration with standard holders Engineered for secure clamping, the cutter features an Ø25 mm shank and an M16 thread for reliable mounting in common toolholders; the compact L65 mm overall length and light 0.158 kg mass contribute to low overhang and reduced vibration. Together, these specifications support higher process stability and improved surface quality in T-slot milling. The design is intended for straightforward fitment into standard milling setups, enabling predictable results and easy integration into existing tooling systems. Contact Metav Werkzeuge for tailored application recommendations and to arrange supply of the Teknik Cutting Tools T-slot cutter TKC288TM for your production needs Technical data Article number: TKC288TM Product type: T-slot cutter Brand: Teknik Makina For inserts: MGMN 300 (Korloy) Cutting diameter: 63 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 2 Cutting edge height: 3 mm Weight: 0.158 kg Thread: M16 ECLASS: 21180605 Allen key size: 6 Label: 63mm T-Nut Fräser MGMN 300 L65mm SKU/UID: TKC288TM Designation (EN): for MGMN 300 Indexable Inserts FAQ Which insert type fits this cutter? The T-slot cutter accepts MGMN 300 indexable inserts; suppliers such as Korloy produce compatible grades. How many cutting edges are used and what is the edge height? This tool uses 2 cutting edges with a cutting-edge height of 3 mm, optimised for stable T-slot creation. What shank diameter and mounting thread are required? The cutter has an Ø25 mm shank and an M16 thread, designed for standard toolholders and secure clamping. Is a special tool needed for assembly or adjustment? Assembly and insert changes require a 6 mm Allen key for the clamping screws. What is the catalogue or article number for ordering? Order using the article number TKC288TM to ensure the correct T-slot cutter configuration. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine precise 63 mm cutting diameter, compatibility with MGMN 300 indexable inserts and a robust 20 mm shank for reliable T-slot machining; order the T-nut cutter directly via Metav Werkzeuge or consult our specialists for application advice. T-nut cutter for MGMN 300 indexable inserts by Teknik Makina — 63 mm, L55 mm T-nut cutter designed for accurate T-slot milling with MGMN 300 indexable inserts, suitable for CNC milling centres and tooling shops 63 mm cutting diameter Compatible with MGMN 300 inserts 20 mm shank for secure clamping Four cutting edges, 3 mm cutting height Faster, more accurate T-slot production The combination of a 63 mm cutting diameter and a compact 55 mm overall length delivers a stable cutting profile that reduces vibration and rework. In practice, this means shorter machining cycles and consistent slot geometry across batches. The geometry is optimised for repeatable T-slot milling, allowing production teams to rely on predictable tolerances and minimise secondary finishing. Cost-effective tooling through standard inserts Compatibility with MGMN 300 indexable inserts—manufactured by Korloy—keeps running costs low because inserts are widely available and easy to replace. The cutter accepts the standard insert form, enabling quick index changes and extended tool life through economical insert rotation. The presence of four cutting edges and a 3 mm cutting height provides an effective balance between material removal rate and surface quality. Stable clamping and process reliability A 20 mm shank ensures secure clamping in standard toolholders and helps maintain concentricity at elevated feed rates. The solid shank design contributes to process reliability on both small-batch work and continuous production runs. Identified as TKC321TM, the tool is compact and lightweight while engineered for consistent repeatability on CNC machines. Practical fit for workshop and production needs This cutter is suited to tooling shops and production lines that require dependable T-slot generation with minimal setup time. With a straightforward insert interface and a compact overall design, it integrates smoothly into existing tool sets and changeover routines. For specialised applications or clarification on machining parameters, technical guidance is readily available to support successful implementation. For supply and technical advice on Teknik Makina T-slot cutters and compatibility with Korloy MGMN 300 inserts, contact Metav Werkzeuge in Emmerich for fast, reliable service and application guidance. Technical Data SKU: TKC321TM Label: 63mm T-Nut Fräser MGMN 300 L55mm Manufacturer: Teknik Makina Core dimensions Diameter: 63 mm Overall length: 55 mm Shank diameter: 20 mm Thread: 12 Weight: 0.132 kg Cutting edges: 4 Cutting height: 3 mm ECLASS: 21180605 Compatibility & features For MGMN 300 indexable inserts Compatible inserts manufacturer: Korloy Product category: T-nut cutter FAQ Which inserts fit this cutter? The cutter is designed for MGMN 300 indexable inserts; Korloy inserts in this format are compatible. What are the key dimensions to check for toolholder fit? Check the 20 mm shank diameter and the 55 mm overall length to ensure proper clamping and clearance. How many cutting edges does the tool have and what is the cutting height? The tool features four cutting edges with a 3 mm cutting height, offering a balance between removal rate and surface finish. What is the product SKU for ordering and reference? The product SKU is TKC321TM, which references the Teknik Makina T-nut cutter for MGMN 300 inserts. Is this cutter suitable for CNC milling centres? Yes; the compact geometry and secure shank make it suitable for standard CNC milling centres used in production and repair shops. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high cutting stability and fast servicing: the TKC307TM delivers a Ø63 mm cutting diameter on a 25 mm shank with two cutting edges and quick indexable inserts. Order the T-slot cutter directly via Metav Werkzeuge or ask the consultants for tailored application advice. T-slot milling cutter TKC307TM – T-nut cutter, Ø63 mm, 25 mm shank (Teknik Makina) The T-slot milling cutter TKC307TM is a purpose-built indexable tool for producing T-slots and T-nut profiles in workshop and production environments, designed for reliable fixture and table machining. Ø63 mm cutting diameter 25 mm shank for solid clamping Compatible with Korloy MGM 5C inserts Two cutting edges for steady engagement Consistent stability and precise slot geometry for production work The TKC307TM is engineered to provide stable cutting performance through a combination of a 25 mm shank and a broad Ø63 mm cutter body, which together reduce vibration and maintain slot geometry under load. With two cutting edges, the tool balances material removal and chip control, helping to achieve repeatable T-slot profiles. The 5 mm cutting height defines the standard slot engagement per pass and supports accurate depth control when machining fixture rails or assembly plates. These design choices prioritise predictable results and higher first-pass yields in serial or single-part production. Fast indexable system that reduces downtime and running costs The indexable concept fitted for Korloy MGM 5C inserts allows replacements without regrinding the tool body, so maintenance intervals are short and tooling overhead is reduced. Fixing is secured by an M8 torx screw and adjusted with a 6 mm Allen key, enabling quick and safe insert changes at the machine. At 0.529 kg, the cutter offers a manageable handling weight for tool changes while remaining rigid in the holder. This setup translates into lower total cost of ownership and fewer interruptions on busy production lines, supporting efficient workshop planning. Integrates with standard milling spindles and fixture setups The cutter’s 25 mm shank is compatible with common collet and chuck systems, easing retrofitting into existing milling centres and CNC workstations. With an overall length of 120 mm, the tool provides reach for recessed T-slot profiles while keeping overhang to a minimum for concentricity. The indexable format makes the tool suitable for a range of machining contexts where reproducibility and serviceability matter, from jigs and fixtures to machine-table refurbishments. Technical documentation and the available mounting hardware information support straightforward integration into production tooling arrays. For reliable T-slot machining with Teknik Makina quality, contact Metav Werkzeuge in Emmerich for personalised specification support and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: TKC307TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Shank diameter: 25 mm Cutting height: 5 mm Number of cutting edges: 2 Overall length: 120 mm Weight: 0.529 kg Special features For indexable inserts: MGM 5C Compatible insert supplier: Korloy Torx screw: M8 Wrench: 6 mm Allen key FAQ What type of slots can be machined with this cutter? The TKC307TM is designed specifically for producing T-slots and T-nut profiles commonly used for fixtures and machine tables. Which inserts fit this cutter? This cutter accepts Korloy MGM 5C indexable inserts, allowing fast replacement without modifying the cutter body. What toolholder connection is required? A toolholder or collet compatible with a 25 mm shank is required to secure the cutter for machining operations. How deep can each pass cut reliably? The cutter has a 5 mm cutting height, which defines a typical engagement per pass; actual depth depends on workpiece setup and machining parameters. Is the TKC307TM suitable for retrofit into existing milling machines? Yes — the 25 mm shank and 120 mm overall length make the cutter straightforward to integrate into standard milling spindles and fixture arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of high stability and straightforward insert compatibility to reduce setup time and increase throughput; the large Ø63 mm cutting diameter with a robust 32 mm shank delivers secure clamping and consistent run-out, while compatibility with SPMG 06 indexable inserts keeps tool changes fast — order via Metav Werkzeuge or contact our consultants for application advice. T-slot milling cutter TKC062TM by Teknik Makina — Ø63 mm, compatible with SPMG 06 inserts The T-slot milling cutter TKC062TM is designed for efficient machining of T-slots and similar profiles in industrial milling operations, combining a large cutting diameter with a solid shank for repeatable accuracy. Ø63 mm cutting diameter for standard T-slots Compatible with SPMG 06 indexable inserts Solid 32 mm shank for secure clamping 8 mm cutting height for deep T-slot profiles Stable geometry for precise T-slot production The cutter’s large Ø63 mm diameter and substantial 32 mm shank provide a stable machine interface that minimises vibration and run-out during cutting. This mechanical stability translates directly into improved surface finish and longer insert life, which is particularly important in production environments where consistency is required shift after shift. With a balanced 120 mm overall length, the tool is long enough for most T-slot operations while keeping deflection low; the tool’s mass (0.874 kg) further aids vibration damping without imposing excessive load on the spindle. These design choices reduce scrap rates and support predictable, high-yield machining cycles. Quick insert changes and broad insert compatibility Changeover is designed to be fast and reliable: the cutter accepts SPMG 06 indexable inserts from suppliers such as Taegutec, secured with M2.2x5 Torx screws that are tightened with a T7 key. The accessible screw arrangement and standardised insert format mean downtimes are minimised — a clear efficiency gain for batch production and job shop workflows. The tool features a 45 mm cutting length and a reduced cutting-shank diameter of 31.5 mm around the insert area to ensure correct insert seating and optimal chip evacuation. For operations using industry-standard indexable plates, this cutter simplifies logistics and reduces the number of special inserts required in inventory. Built for productivity and workshop reliability With an 8 mm cutting height the cutter makes deep T-slot profiles in fewer passes, lowering cycle times while preserving insert life through conservative engagement geometry. The combination of a stiff shank and a well-proportioned head means the tool performs reliably on vertical milling machines and machining centres that handle heavy-duty slotting tasks. Material-specific recommendations are derived from insert selection rather than cutter geometry, so pairing the tool with the correct SPMG 06 grade achieves a balance between cutting speed and tool life across cast iron, alloyed steels and non-ferrous materials. The result is a robust solution that supports continuous production and contributes to a more predictable manufacturing schedule. Contact Metav Werkzeuge for tailored machining recommendations on the Teknik Makina TKC062TM T-slot milling cutter — technical advice and order processing are available from our Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TKC062TM Manufacturer: Teknik Makina Product: T-slot milling cutter Compatible inserts: SPMG 06 Insert supplier reference: Taegutec Diameter: 63 mm Shank diameter: 32 mm Cutting shank diameter: 31.5 mm Cutting length (shank): 45 mm Cutting height: 8 mm Overall length: 120 mm Weight: 0.874 kg Torx screw: M2.2x5 Torx key: T7 For use with indexable inserts Designed for T-slot machining Solid shank design for stability Accessible screw fixation for fast changeovers FAQ Which insert size and type does the cutter use? The TKC062TM is configured for SPMG 06 indexable inserts; pairing with a Taegutec grade suited to the workpiece material provides the best balance between cutting speed and tool life. What are the key dimensions for clamping and setup? Critical setup dimensions include a 32 mm shank diameter, 120 mm overall length and a 63 mm cutting diameter; these figures are intended to guide tooling holders and clamping decisions. How deep can the cutter machine a T-slot in one pass? The cutter offers an 8 mm cutting height; actual depth per pass should be selected according to the chosen insert grade and machine capability to maintain insert life and surface quality. Are the fixing screws and key standardised? Yes, the cutter uses M2.2x5 Torx screws tightened with a T7 key, which simplifies maintenance and reduces the need for specialised screw formats. Is this cutter suitable for batch production? The combination of a solid shank, standard insert format and quick-change fixation makes the tool well suited to repetitive production work where setup time and repeatability matter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, high-capacity milling solution that pairs efficient material removal with secure clamping and proven indexable insert compatibility; the combination of a 63 mm cutting diameter, 8 cutting edges and a 32 mm shank supports continuous workshop production with predictable results — contact Metav Werkzeuge for procurement or technical clarification. T-slot cutter TKC052TM — 63 mm diameter, 8 cutting edges (Teknik Makina) T-slot cutter TKC052TM for machining T-slots and grooves in standard milling setups, designed for indexable inserts and stable mounting in typical toolholders 63 mm diameter for wide T-slots 8 cutting edges for rapid material removal Compatible with SPMG 05 indexable inserts 32 mm shank for secure toolholder clamping Fast, stable machining thanks to balanced cutting geometry The milling head delivers high removal rates through its 8 cutting edges, which distribute cutting forces and reduce vibration during slotting operations. This geometry enables a consistent chip flow and helps maintain surface finish while shortening cycle times. The 63 mm outer diameter provides sufficient clearance for most standard T-slot profiles, while the moderate overall length of 120 mm keeps run-out low in the toolholder. Where indexable inserts are used, changeover is quick and repeatable, reducing downtime in batch or series production. Secure clamping and simple insert management for workshop efficiency A 32 mm shank ensures robust clamping in conventional toolholders and reduces the risk of movement under load, supporting stable cutting even at higher feed rates. The cutter accepts SPMG 05 indexable inserts (compatible with Taegutec), which simplifies inventory and allows selection of grade and coating to match the workpiece. Insert clamping employs M2x4.2 Torx screws and a T6 key, enabling reliable fixation with standard workshop tools; this arrangement reduces the chance of incorrect seating and speeds up maintenance cycles. Application fit and predictable performance for mixed machining tasks With a cutting height of 5 mm and a cutting length of 45 mm on the shaft, the tool is suited to producing shallow to medium-depth T-slots and finishing passes where dimensional control matters. The unit weight of 0.861 kg reflects a solid construction that resists deflection, supporting repeatable results in steel and lighter alloys when used within recommended parameters. For process planning, the tool’s compatibility with common indexable insert formats allows selection of coatings and grades to match throughput and surface requirements, so process engineers can balance productivity and tool life effectively. Should clarification be required, Metav Werkzeuge’s technical advisors are available to support selection and integration. Contact Metav Werkzeuge for tailored advice on tooling choices and to arrange supply of the Teknik Cutting Tools T-slot cutter TKC052TM for reliable workshop integration — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC052TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Product name: T-slot cutter TKC052TM Compatible insert type: SPMG 05 Compatible insert supplier: Taegutec Dimensions & core data Diameter: 63 mm Cutting edges: 8 Overall length: 120 mm Shank diameter: 32 mm Cutting length on shaft: 45 mm Cutting height: 5 mm Weight: 0.861 kg Special features Torx screw for inserts: M2x4.2 Torx key size: T6 Indexable-insert system for fast changeover Balanced multi-edge configuration for vibration control FAQ Which insert type fits this cutter? The cutter is designed for SPMG 05 indexable inserts; compatible grades from Taegutec can be used for different materials and surface requirements. What diameter and shank size does the tool have? The tool has a 63 mm cutting diameter and a 32 mm shank, providing stable clamping in common toolholders for routine milling operations. How many cutting edges are available and what is the benefit? With 8 cutting edges, the tool offers distributed cutting forces for smoother operation and efficient material removal during T-slot milling. What fastening hardware is required for the inserts? Insert clamping is secured with M2x4.2 Torx screws tightened with a T6 key for reliable and repeatable seating. Is the cutter suitable for deep T-slots? The cutter provides a cutting height of 5 mm and a shaft cutting length of 45 mm; it is optimised for shallow to medium-depth T-slots and finishing passes rather than very deep profiles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust T-slot milling solution that combines high material removal capability with precise insert compatibility to keep production moving. Choose the cutter for its stable Shank Ø 32 mm and 63 mm diameter, and contact Metav Werkzeuge for purchasing or technical advice. T-slot milling cutter TKC056TM — 63 mm diameter, 8 cutting edges (Teknik Cutting Tools) The T-slot milling cutter TKC056TM is a specialised tool for machining T-slots and undercut profiles in industrial milling operations, designed for use with indexable inserts in heavy-duty and repetitive production environments 63 mm diameter for wide T-slots 8 cutting edges for high material removal Shank Ø 32 mm for secure clamping Compatible with SPMG 06 indexable inserts High-efficiency cutting for stable production Engineered to increase throughput, the cutter’s 63 mm diameter combined with 8 cutting edges delivers a high removal rate while maintaining a consistent profile. The geometry is optimised for T-slot formation, so chips are managed effectively and cycle times are reduced. This configuration supports reliable machining of slots where repeatability matters, making the tool suitable for series production and component preparation in metalworking shops. Precise system compatibility and simple insert handling The tool is designed for use with SPMG 06 indexable inserts and is compatible with Taegutec-type plates, allowing straightforward insert replacement and tooling standardisation across machines. The cutter secures inserts with a Torx screw M2,2x5 and uses a T7 key, ensuring repeatable clamping torque and minimal setup variation. The defined cutting length 45 mm and cutting height 6 mm give clear parameters for depth control and slot geometry, so process planners can integrate the cutter into CAM programmes with confidence. Robust design for workshop integration and reliable handling With a Shank Ø 32 mm and overall length 120 mm, the cutter balances rigidity and reach for common milling setups. The reduced risk of vibration and the clear dimensional data simplify clamping decisions and fixture design. At a weight of 0.85 kg, handling and tool changes remain practical in a busy workshop. The product’s measured specifications support predictable tool life planning and spare-part provisioning, helping maintenance and purchasing teams keep operations on schedule. For technical consultation or to order the Teknik Cutting Tools T-slot milling cutter TKC056TM, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — Metav’s specialists will advise on insert selection and machine adaptation Technical data Article number: TKC056TM Name: T-slot milling cutter (T-Nut Fräser) Facts Diameter: 63 mm Cutting edges: 8 Shank diameter: 32 mm Cutting length (shaft): 45 mm Cutting shank diameter: 31.5 mm Cutting height: 6 mm Overall length: 120 mm Weight: 0.85 kg Special features For indexable inserts: SPMG 06 Compatible with Taegutec inserts Torx screw: M2,2x5 Torx key: T7 FAQ Which inserts are compatible with this cutter? The cutter accepts SPMG 06 indexable inserts and is compatible with Taegutec insert types for standardised replacement. What are the key dimensions to consider for fixture design? Important dimensions include the 63 mm diameter, Shank Ø 32 mm, cutting length 45 mm, and overall length 120 mm for clamping and reach planning. How are the inserts secured? Inserts are fastened with a Torx screw M2,2x5; the required key size is T7, ensuring stable and repeatable clamping. Is this cutter suitable for series production? Yes — the combination of multiple cutting edges and a robust shank supports repeatable T-slot machining in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, hard-wearing solution that combines precise 90° profiling with simple, secure clamping. The combination of compatibility with TPKN 1603–2204 indexable inserts and a standard 22 mm shank ensures quick integration into existing turn setups — order or consult via Metav Werkzeuge for reliable supply and expert advice. Corner tool head (Eckmesserkopf) — Angle tool head for TPKN 1603-2204 indexable inserts, 90° cutting angle (Teknik Makina) Corner tool head (Eckmesserkopf) for right-angle profile turning and finishing on lathes, designed for use with TPKN 1603–2204 indexable inserts in industrial turning applications Compatible with TPKN 1603-2204 inserts 90° cutting angle for profile turning 22 mm shank diameter for standard holders Secured with M6x17 hex screw and 4 mm Allen key Consistent 90° profiles for repeatable production quality The compact corner tool head delivers a true 90° cutting angle, making it suitable for producing square shoulders and consistent profiles on turned components. Using standard TPKN 1603–2204 indexable inserts reduces process variability: the insert geometry determines the cutting trace, while the head maintains rigid positioning. For operations where reproducibility and low set-up time matter, the combination of defined insert size and fixed cutting angle helps to shorten inspection cycles and reduce scrap rates, supporting steady production output with fewer tool changes. Fast, secure clamping that reduces downtime Designed for straightforward mounting, the head is fixed with an M6x17 hex screw and requires a 4 mm Allen key for insert clamping, which enables rapid insert changes without specialised tools. The 22 mm shank matches common toolholder standards, allowing immediate installation into many turret and toolblock systems. The compact dimensions — 63 mm diameter and 44 mm overall length — together with a mass of 0.463 kg, contribute to a low moment of inertia and improved rigidity during light-to-medium turning, which helps to maintain surface finish and dimensional tolerance during typical workshop tasks. Compact design for versatile lathe setups and efficient handling A small footprint simplifies access to tight tool positions and makes the head a practical choice for multi-tool turrets and constrained setups. The head’s geometry supports quick indexable insert alignment and repeatability between tool stations, which benefits short-run production and prototyping alike. Paired with the right inserts, this solution provides a balance between operational flexibility and machining economy, allowing maintenance of throughput without sacrificing process stability. For procurement and logistics, Metav Werkzeuge’s supply from Emmerich provides consistent availability and a quality filter for the European market. For secure, right-angle turning tasks, request the Teknik Makina corner tool head (SKU T118TM) through Metav Werkzeuge — Metav’s advisors can confirm fitment and arrange prompt delivery from Emmerich. Technical data Article number: T118TM Manufacturer: Teknik Makina Designation: Eckmesserkopf / Corner tool head Application: for TPKN 1603-2204 Indexable Inserts Core data Diameter: 63 mm Shank diameter (mount): 22 mm Overall length: 44 mm Cutting angle: 90° Number of cutting edges: 3 Weight: 0.463 kg Features & mounting Secured with M6x17 hex screw Requires 4 mm Allen key Compatible with TPKN 1603 inserts SKU: T118TM FAQ What inserts fit this corner tool head? The corner tool head is compatible with TPKN 1603–2204 indexable inserts, as specified for the T118TM head by Teknik Makina. What is the cutting angle and what does it mean in practice? The head provides a 90° cutting angle, which is ideal for producing square shoulders and right-angle profiles where predictable geometry and repeatable edge positions are required. How is the insert secured in the head? Insert retention is achieved using an M6x17 hex screw; a 4 mm Allen key is used for tightening and replacement. What are the mounting dimensions for the toolholder? Mounting requires a toolholder that accepts a 22 mm shank; the head’s compact 63 mm diameter and 44 mm overall length suit constrained turret positions. Is the T118TM suitable for compact turret setups? Yes, the T118TM corner tool head’s compact design and modest mass (0.463 kg) make it well suited to multi-tool turrets and tight lathe stations where access and rigidity are important. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-precision corner turning is achieved by combining a stable clamping concept with a compact profile and compatibility for standard indexable inserts; the combination of the 90° cutting angle, secure Torx M4x10 fixing and the compact Ø63 mm body supports consistent part geometry and reduced set-up time. Order the corner tool head directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Eckmesserkopf T492TM — Corner tool head, 90° cutting angle, Ø63 mm (Teknik Makina) The Eckmesserkopf T492TM is a compact corner-turning head designed for use with LNGX 1307 indexable inserts in precision turning and profiling tasks on lathes and turning centres. *Compact Ø63 mm body for tight toolposts *Compatible with LNGX 1307 indexable inserts *Secure Torx M4x10 fixing; T15 key interface *Precise 90° cutting angle; six cutting edges Consistent geometry through a true 90° cutting angle The rigid design centres on a 90° cutting angle that stabilises the cutting direction and reduces the need for corrective reworking. With six cutting edges, the head enables repeatable corner radii and predictable chip flow, which in turn supports consistent surface finish and dimensional control. For workshops that value first-pass accuracy, this configuration reduces inspection loops and shortens cycle time. Fast, secure insert changes minimise downtime The clamping system uses a Torx M4x10 screw and a T15 key interface for quick and reliable indexable insert replacement. Compatibility with LNGX 1307 inserts — widely available from Walter and other manufacturers — simplifies inventory management and allows rapid changeovers. The straightforward fastening procedure supports fast maintenance intervals and a low risk of incorrect seating. Compact footprint with robust mounting and balance A compact Ø63 mm head and an overall length of 45 mm combine with a 22 mm mounting diameter to fit small toolposts while retaining rigidity. At approximately 0.56 kg, the unit balances mass and stiffness for stable cutting under typical turning loads. This compact construction is advantageous for confined setups where tool clearance and unobstructed chip evacuation are essential. Clear application scope and practical handling Designed primarily for corner and profiling operations with indexable inserts, the head is suitable for standard turning cycles where insert interchangeability and positional accuracy are required. An indexable insert system means the cutting edge can be renewed without regrinding the tool, which lowers tooling cost per part while maintaining machining quality. For clarification on machine compatibility or specific machining strategies, Metav Werkzeuge provides application support and selection advice. For application advice or a tailored quotation for the Teknik Makina Eckmesserkopf T492TM, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 for local supply from Emmerich. Technical data SKU: T492TM Manufacturer: Teknik Makina Product name: Eckmesserkopf For inserts: for LNGX 1307 Indexable Inserts Compatible insert manufacturer: Walter Facts Diameter: 63 mm Overall length: 45 mm Mounting diameter: 22 mm Weight: 0.56 kg Cutting angle: 90° Cutting edges: 6 Special features Torx screw: M4x10 Torx key size: T15 Compatible inserts: LNGX 1307 Application: Corner turning with indexable inserts FAQ Which indexable inserts fit this turning head? The Eckmesserkopf T492TM is designed for LNGX 1307 indexable inserts; these inserts are compatible with the clamping geometry and ensure correct seating and performance. What fastening tools are required for insert changes? Insert clamping and release use a Torx M4x10 screw tightened with a T15 key to guarantee secure fixation and repeatable seating. Will the head fit small toolposts and tight setups? The compact Ø63 mm body with a 22 mm mounting diameter and 45 mm overall length is intended for installations with restricted clearance while maintaining rigidity. How many cutting edges are available before replacement? The head presents six cutting edges via the insert system, extending time between indexings and reducing tooling change frequency. Is the Eckmesserkopf T492TM suitable for general profiling and finishing? Yes — the combination of a fixed 90° cutting angle and indexable insert use makes the head well suited to both profiling and finishing passes where consistent geometry is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com

Take advantage of a compact turning solution that combines precise 90° shoulder machining with secure 22 mm mounting — the design reduces set-up time while extending insert service intervals. Order the corner turning head directly via Metav Werkzeuge or contact the consultants for tailored advice. Eckmesserkopf T904TM — Corner turning head, 90° cutting angle, 22 mm shank (Teknik Makina) The Eckmesserkopf T904TM is a corner turning head for XNKT 0805 indexable inserts, engineered for square-shoulder turning and short overhangs in precision lathe work Corner turning head for XNKT 0805 inserts 22 mm shank diameter for secure mounting 90° cutting angle for square shoulder turning Compatible with Korloy inserts and M4x10 fixing Secure mounting for consistent surface quality The head is designed around a 22 mm shank and a substantial 63 mm diameter, giving a stable interface with the toolholder and reducing flex under load. The fixing uses an M4x10 Torx screw tightened with a T15 key, which concentrates clamping force and improves repeatability at each tool change. With a mass of 0.575 kg, the assembly balances rigidity and manageable handling for workshop set-ups. These dimensional choices lead to fewer vibrations and a more consistent finish on the workpiece, so cycle times remain predictable and rework is reduced. Efficient use of indexable inserts for longer uptime Built for the XNKT 0805 family of indexable inserts and compatible with Korloy inserts, the head supports multi-edge inserts to extend cutting life between interventions. The 90° cutting angle is optimised for square-shoulder turning and accurate shoulder faces, allowing straightforward machining strategies and simple toolpath planning. With 6 cutting edges indicated, insert indexing frequency is reduced, which lowers downtime and contributes to a more economical toolroom workflow. The combination of insert standardisation and durable mechanical design promotes consistent part quality across batches. Compact geometry that suits confined toolposts A short overall length of 45 mm and the compact head profile make the unit suitable where overhang must be kept to a minimum. The compact layout helps maintain stiffness close to the cutting zone, improving dimensional control in finishing passes. The design is readily integrated into typical lathe turrets and custom fixtures that accept a 22 mm shank, enabling quick retrofitting without major changes to existing tool arrangements. The relatively small footprint also aids storage and logistics on the shop floor, contributing to efficient workshop organisation. For solid, square-shoulder turning with reliable insert compatibility, request the Teknik Cutting Tools corner turning head via Metav Werkzeuge — Metav Werkzeuge’s specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on integration and selection Technical data SKU: T904TM Name: Eckmesserkopf for XNKT 0805 Indexable Inserts Manufacturer: Teknik Makina eClass: 21180902 Facts Shank diameter: 22 mm Head diameter: 63 mm Cutting angle: 90° Number of cutting edges: 6 Overall length: 45 mm Weight: 0.575 kg Torx screw: M4x10 Torx key: T15 Compatibility & features Compatible inserts: XNKT 0805 Compatible insert manufacturer: Korloy Designed for square-shoulder turning Compact design for reduced overhang FAQ What insert type fits the turning head? The turning head accepts XNKT 0805 indexable inserts; Korloy-specified XNKT 0805 inserts are compatible with the head. Which shank diameter is required for mounting? Mounting requires a 22 mm shank interface; the T904TM is specified for holders that accept a 22 mm diameter. What is the cutting geometry of the tool head? The head is configured for a 90° cutting angle, making it suitable for accurate square-shoulder turning operations. How is the insert secured to the head? The insert is retained using a fixing system that employs an M4x10 Torx screw tightened with a T15 key for reliable clamping. What are the compact dimensions and workshop benefits? With a 63 mm head diameter and 45 mm overall length, the design reduces overhang and improves rigidity in confined toolholding arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise 90° geometry and standardised clamping to ensure repeatable shoulder turning and quick insert changes. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice and supply from Emmerich. Eckmesserkopf — 90° indexable turning head for LNMT 1306 inserts by Teknik Makina The Eckmesserkopf is a compact 90° indexable turning head designed for square-shoulder and facing operations with LNMT 1306 indexable inserts, suitable for use where secure clamping and short overhangs are required Compatible with LNMT 1306 indexable inserts 90° cutting angle for square shoulder cuts 22 mm holder diameter for secure clamping Torx M4x10 screw with T15 key quick fastening Repeatable 90° results through precise geometry and compatibility The turning head is engineered around a 90° cutting angle, providing unambiguous geometry for square shoulder and facing operations. With direct compatibility with LNMT 1306 indexable inserts and recognition of ISCAR as a matching insert manufacturer, the design removes uncertainty at tool selection and reduces setup time. The compact dimensions and standardised interfaces translate into consistent tool positioning, which in turn supports tighter tolerance control and fewer rejected parts in serial production. Secure clamping and straightforward indexable insert changes Clamping is executed via a dedicated Torx fastener, specified as M4x10 and operable with a T15 key, delivering reliable fixation without complex procedures. This straightforward fastener system shortens changeover time and lowers the likelihood of incorrect seating, so tool changes become a predictable, low-risk activity. The 22 mm shank diameter ensures a close fit in standard holders, improving rigidity and reducing vibration during cut engagement for a cleaner surface finish and longer insert life. Compact design that suits shop floors and production centres With an overall length of 40 mm and a head diameter of 63 mm, the toolholder offers a compact footprint that is advantageous in confined toolpost arrangements. The assembly weight of 0.596 kg contributes to manageable inertia while maintaining the mass needed for stability. The head provides seven cutting edges, enabling a range of cutting orientations and making the component a versatile option for turning and facing tasks where a compact, stable solution is preferred. For workshops looking to centralise tooling choices, this turning head simplifies inventory by matching a widely used insert format. For Teknik Cutting Tools quality and dependable 90° turning performance, contact Metav Werkzeuge in Emmerich for ordering and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: T229TM Manufacturer: Teknik Makina Product name: Eckmesserkopf For inserts: LNMT 1306 Indexable Inserts Compatible inserts manufacturer: ISCAR Core specifications Diameter: 63 mm Shank / holder diameter: 22 mm Overall length: 40 mm Weight: 0.596 kg Cutting angle: 90° Cutting edges: 7 Features Torx screw: M4x10 Torx key size: T15 Designed for square shoulder and facing operations Compact footprint for tight toolpost arrangements FAQ Which inserts fit this turning head? The Eckmesserkopf is designed for LNMT 1306 indexable inserts and is listed as compatible with inserts from ISCAR; confirm insert geometry before ordering. How is the toolhead secured in the holder? Clamping uses a Torx fastener specified as M4x10, tightened with a T15 key for secure fixation and reliable repeatability. Is this tool suitable for shoulder turning at 90°? Yes, the head’s 90° cutting angle is intended specifically for square-shoulder and facing operations, giving predictable contact geometry. What are the main dimensions to check for toolpost fitment? Key dimensions are 63 mm head diameter, 22 mm shank diameter and 40 mm overall length; these determine clearance and rigidity in the toolpost. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, purpose-built solution that combines compatibility with LNMX 1006 indexable inserts, a rigid 90° cutting geometry and straightforward mounting for reliable corner turning. Order or request application advice directly via Metav Werkzeuge or consult the technical team for integration support. Corner tool head — 90° turning head for LNMX 1006 indexable inserts by Teknik Makina The Corner tool head is a precision turning head designed for 90° corner and face turning operations, suited to LNMX 1006 indexable inserts and engineered for stable clamping in compact tool setups. For LNMX 1006 indexable inserts 90° cutting angle for square turning 22 mm tool shank diameter Secured with M3x7 Torx screw Stable clamping and precise insert compatibility for consistent results The tool head is made to accept LNMX 1006 indexable inserts (compatible with Korloy) and retains them securely with an M3x7 Torx screw tightened using a T8 key. This configuration reduces insert movement and repeatability errors during short overhang operations. The 90° cutting geometry provides a defined approach for square and corner turning, simplifying setup and enabling predictable cutting forces. By using standard indexable insert formats, tool changeovers are rapid and repeatable, which supports consistent cycle times and reduced downtime. Compact dimensions that limit vibration and support rigid machining A compact design—notably a 22 mm shank diameter, 63 mm head diameter and 45 mm overall length—helps to minimise leverage and improve stiffness in the holder assembly. Reduced overhang and a balanced mass (approx. 0.495 kg) lower the risk of chatter when performing short-reach operations. These measurable characteristics favour stable finishing and accurate dimensional control where stiffness and minimal deflection are essential. The reduced footprint also assists in crowded turret stations or where multiple tool stations must be arranged closely. Practical handling, maintenance and integration into production workflows The head is supplied for direct mounting and easy servicing: replacement of the insert is performed via the Torx screw, while the compact form factor speeds up storage and interchange. The head’s construction suits routine workshop maintenance and supports lean inventory management by using the common LNMX 1006 insert family. Clear mechanical data—shank size, head diameter, fastening type—makes it straightforward to verify compatibility with existing tool posts and turret systems prior to installation. Documentation of these parameters facilitates spare-part planning and helps to standardise tooling across similar machining tasks. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Cutting Tools corner tool head (SKU T388TM) for integration into existing turning setups Technical Data Article number: T388TM Manufacturer: Teknik Makina Diameter (head): 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.495 kg Cutting angle: 90° Number of cutting edges: 6 Compatible inserts: LNMX 1006 Suitable insert manufacturer: Korloy Fastening screw: M3x7 (Torx) Required Torx key: T8 ECLASS: 21181015 FAQ Which indexable inserts fit this turning head? The head is designed for LNMX 1006 indexable inserts and is compatible with inserts from Korloy, ensuring standardised replacement and predictable cutting geometry. What fastening hardware and tool are required for insert changes? Insert clamping is performed with an M3x7 Torx screw; a T8 Torx key is used to secure and release the insert during maintenance. What are the key dimensions for machine integration? Key dimensions are a 22 mm shank diameter, 63 mm head diameter and 45 mm overall length, providing the data needed to confirm fit in turrets and holders. For which operations is this head most suitable? The 90° cutting angle and compact form make it ideal for corner and square turning operations where stiffness and short overhang are priorities. What is the product SKU for ordering or referencing? The item is listed as SKU T388TM, which can be quoted when requesting technical details or preparing spare-part lists. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid 22 mm shank, a defined 90° cutting angle and broad compatibility with WNMU 0806 indexable inserts to secure consistent shoulder turning and short setup times; order the Corner Tool Head directly via Metav Werkzeuge or ask our consultants if needed. Corner Tool Head T544TM — 90° cutting angle, Ø63 mm (Teknik Makina) Corner Tool Head T544TM for WNMU 0806 indexable inserts, engineered for precise shoulder and external turning in workshop and production environments 90° cutting angle for accurate shoulder turning Fits WNMU 0806 indexable inserts (Kyocera) 22 mm shank for rigid clamping Torx M5x12 fastening, T20 key required Precise shoulder turning with dependable indexable inserts The Corner Tool Head T544TM is designed around a 90° cutting angle that delivers true shoulder faces and controlled external turning. Paired with standard WNMU 0806 indexable inserts, the holder translates insert geometry into predictable cutting results, reducing rework and inspection time. This configuration is particularly advantageous where repeatable right‑angle features are required and where consistent tool orientation shortens cycle variability. Stable clamping and compact tool geometry for process reliability A 22 mm shank and a head diameter of Ø63 mm provide the necessary stiffness to resist chatter during interrupted cuts. The compact 46 mm overall length minimises overhang, improving rigidity and tool life in tight setups. The tool’s mass of 0.556 kg balances robustness and manoeuvrability, contributing to stable cutting conditions and fewer tool‑change interruptions during batch production. Fast, secure insert changes to keep downtime low Secure clamping is achieved with a M5x12 Torx screw and a T20 key, enabling quick and repeatable insert changes while maintaining clamping force. The holder accommodates inserts with four cutting edges, allowing multiple indexed positions before replacement. This arrangement supports efficient shopfloor routines: shorter maintenance windows, fewer set‑up errors and a clear workflow for consumable rotation. Compatibility that simplifies procurement and tooling strategies Compatibility with Kyocera WNMU 0806 inserts reduces the need for bespoke cutting grades and simplifies stock management. The holder is suitable for a wide range of turning tasks where a defined shoulder or corner finish is required, enabling machine shops and production lines to standardise tooling across similar part families. The result is a pragmatic combination of performance and inventory efficiency that supports continuous production. Contact Metav Werkzeuge today to discuss how the Teknik Makina Corner Tool Head T544TM can be integrated into your tooling set — our consultants will advise on compatibility, delivery from Emmerich and suitable inserts for the intended application. Technical Data Article number: T544TM Manufacturer: Teknik Makina Description: Corner tool head for WNMU 0806 indexable inserts Facts Head diameter: 63 mm Shank diameter (clamping): 22 mm Overall length: 46 mm Cutting angle: 90° Number of cutting edges: 4 Weight: 0.556 kg Fastening screw: M5x12 (Torx T20) Special features Compatible with WNMU 0806 indexable inserts Fits inserts from Kyocera Torx fastening for secure clamping Four‑edge insert indexing for extended service life FAQ Which inserts are compatible with this tool head? The Corner Tool Head T544TM is designed for WNMU 0806 indexable inserts, and it is compatible with inserts supplied by Kyocera. What is the shank diameter and why does it matter? The holder has a 22 mm shank diameter; a larger shank increases rigidity, reducing vibration and improving surface finish. For which operations is this holder best suited? Its 90° cutting angle makes it ideal for shoulder and external turning where precise right‑angle features are required. How is the insert secured and what tool is required? Inserts are clamped with an M5x12 Torx screw; a T20 Torx key is required for tightening and changeover. What are the key dimensions and weight of the tool head? Key figures: head diameter 63 mm, overall length 46 mm and weight 0.556 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a tool that combines high material removal with precise groove control: the cutter’s Ø63 mm diameter and 8 cutting edges deliver consistent T-slot profiles while the robust shank Ø32 mm ensures stable clamping for industrial milling operations. Order via Metav Werkzeuge or request procurement support from our consultants for fast, reliable supply. Teknik Makina T-slot milling cutter »T-Nut Fräser« – indexable-insert cutter, Ø63 mm, for CCMT 0602 Teknik Makina T-slot milling cutter designed for machining T-slots and nut grooves in industrial and workshop environments, compatible with CCMT 0602 indexable inserts and built for repeatable precision. T-slot milling cutter Ø63 mm diameter Accepts CCMT 0602 indexable inserts 8 cutting edges for efficient material removal Shank Ø32 mm with 37 mm cutting shank Consistent groove geometry for reliable assembly lines The T-slot milling cutter provides repeatable groove profiles essential for fixtures, machine tables and assembly components. With a Ø63 mm cutting body and a defined cutting height of 9 mm, the tool produces uniform T-slots that reduce downstream fitting time and scrap rates. The combination of diameter and cutting height ensures stable chip evacuation and predictable chip thickness, which in turn supports consistent surface finish and tolerance adherence during serial production. Proven indexable system for economical performance Designed for use with CCMT 0602 indexable inserts, this cutter lowers running costs through fast insert changes and consistent cutting geometry. The use of well-known insert grades allows optimisation of cutting parameters for different materials; the indexable system enables rapid recovery from wear without regrinding, leading to higher uptime and controlled unit costs. The tool’s multiple cutting edges mean each indexable plate contributes to effective stock removal and improved cycle times in repetitive milling tasks. Robust shank and secure assembly for vibration control A shank Ø32 mm provides a rigid connection to the holder and reduces deflection during moderate to heavy cuts. The reduced vibration improves tool life and part accuracy; clamping stability is further supported by the specified Torx screw M2.5×5.5 and T8 key interface for the insert seat, ensuring secure fixation of inserts under load. The effective arrangement of the cutting edges around the body helps to balance radial forces, which is advantageous when integrating the cutter into CNC routines where consistent positional accuracy is required. Practical workshop integration and maintenance advantages The cutter’s layout and overall length of 125 mm make it straightforward to program into tool libraries and set up on milling machines with standard holders. With 8 cutting edges distributed across the body and a shank cutting length of 37 mm, maintenance cycles are predictable and replacement logistics are simplified. The tool’s moderate mass (0.842 kg) balances rigidity with handling convenience during tool changes, while the indexable system supports a straightforward spare-parts strategy for procurement teams. For specification checks, procurement guidance or delivery planning for Teknik Cutting Tools’ T-slot milling cutters, contact Metav Werkzeuge in Emmerich for expert assistance and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC120TM Manufacturer: Teknik Makina SKU: TKC120TM Facts Diameter: 63 mm Cutting edges: 8 Overall length: 125 mm Cutting height: 9 mm Special features For indexable inserts: CCMT 0602 Shank diameter: 32 mm Shank cutting length: 37 mm Shank diameter at cutting head: 19.5 mm Torx screw: M2.5×5.5 Torx key: T8 Weight: 0.842 kg FAQ What materials can this cutter machine effectively? The T-slot milling cutter is configured for general industrial use; tool performance depends on the chosen CCMT 0602 insert grade and machining parameters to suit steel, aluminium or other machinable substrates. How many cutting edges does the tool use and what is the benefit? The tool has 8 cutting edges, which distribute cutting forces for improved surface finish and higher stock-removal rates in serial milling operations. Which insert type is compatible with this cutter? CCMT 0602 indexable inserts are the specified fitment, enabling quick index changes and flexible grade selection for different applications. What are the key dimensions for setting up the cutter in a tool library? Key set-up values include a diameter of 63 mm, overall length 125 mm, shank diameter 32 mm and cutting height 9 mm; these dimensions support programmed offsets and holder selection. Is the cutter suitable for heavy roughing or fine finishing? With the correct CCMT insert grade and appropriate feeds, the cutter can be used for both moderate roughing and semi-finishing tasks; insert choice determines the final surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision finishing to 0.01 mm, a robust 32 mm shank and compatibility with CCMT 09T3 inserts to secure consistent bore quality and shorter setup times; order the boring tool directly via Metav Werkzeuge or contact our consultants for integration advice. Boring tool for fine machining – Internal boring bar, CCMT 09T3, Ø65 mm (Teknik Makina) The boring tool for fine machining is designed for high-precision internal finishing where stable clamping and repeatable surface quality are required in production and maintenance environments. Precision finish to 0.01 mm tolerance Compatible with CCMT 09T3 inserts Max cutting diameter 80 mm Robust 32 mm shank for stable clamping Achieve consistent bore quality with measurable precision This tool is engineered for repeatable, high-accuracy internal machining: with a fine machining tolerance of 0.01 mm the holder reduces rework and inspection time, which translates into higher throughput and lower scrap rates. The combination of a 32 mm shank and the specified cutting geometry ensures reduced vibration and improved surface integrity, so the finished bore meets dimensional and form requirements more reliably. For operations where cycle time and first-pass yield matter, this configuration supports predictable results and easier process control. Designed for efficient integration and insert versatility The holder accepts CCMT 09T3 indexable inserts, offering flexibility to adapt grade and geometry to specific materials and cutting conditions. Using standard insert formats simplifies tool inventory and reduces changeover complexity while enabling efficient optimisation for finish passes. The tool’s cutting length of 220 mm and overall length of 280 mm permit access to deeper bores without excessive overhang, maintaining stiffness and minimising runout when mounted in an appropriate toolholder. Productivity gains through stable clamping and larger bore capability With a maximum cutting diameter of 80 mm and a nominal body diameter of 65 mm, the tool covers a broad range of internal finishing tasks that previously required multiple special holders. The robust shank promotes secure clamping in standard toolposts or holders, improving concentricity and reducing tool wear. These performance aspects combine to lower machining times and extend insert life, supporting a favourable cost-per-part calculation for medium to high-volume production. Practical considerations for workshop use and maintenance The design focuses on user-friendly serviceability: standard insert geometry means quick index changes and minimal downtime, while the solid construction supports repeatable setups. Although insert choice and cutting data must be matched to the workpiece material and machine rigidity, the holder’s specifications—shank Ø 32 mm, cutting length 220 mm—make the tool straightforward to integrate into existing turning centres. Regular inspection of clamping faces and correct torque on the insert screws will preserve accuracy and prolong service life. Contact Metav Werkzeuge for tailored cutting data, delivery options and to arrange procurement of the Teknik Cutting Tools boring bar THKB148TM; phone +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice from our specialists Technical data Article number: THKB148TM Manufacturer: Teknik Makina Designation: Boring tool for fine machining Core specifications Max cutting diameter: 80 mm Diameter: 65 mm Overall length: 280 mm Shank diameter: 32 mm Cutting length: 220 mm Fine machining tolerance: 0.01 mm Weight: 3.895 kg Features & compatibility Inserts: CCMT 09T3 Suitable for fine internal finishing Robust shank for stable clamping FAQ Can the boring tool achieve a 0.01 mm finish consistently? The boring tool for fine machining is specified for 0.01 mm fine machining tolerance and, when combined with suitable inserts and stable machine setup, will deliver highly repeatable bore finishes. Which inserts fit the holder? Compatibility is with CCMT 09T3 indexable inserts; the THKB148TM holder accepts this standard format to allow easy selection of grades and geometries for different materials. What bore diameters can be machined with this tool? The holder supports a maximum cutting diameter of 80 mm and a nominal body diameter of 65 mm, covering a wide range of internal finishing applications. Is the shank suitable for rigid clamping in standard toolholders? The 32 mm shank provides a robust interface for secure clamping in conventional toolposts or toolholders, reducing vibration and improving concentricity. How deep can the tool reach for internal finishing? With a cutting length of 220 mm and an overall length of 280 mm, the tool permits access to moderately deep bores while maintaining stiffness for precision finishing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid toolbody and proven indexable insert system to achieve consistent surface quality and reduced machining time; the combination of a 32 mm shank, 65 mm cutting diameter and compatibility with CCMT 09T3 inserts ensures efficient finish turning operations. Order the boring bar directly via Metav Werkzeuge or consult the technical advisors for application-specific advice. Boring bar for finish machining — Teknik Makina THKB146TM, Ø65 mm, CCMT 09T3 A boring bar for finish machining engineered for precision internal turning and fine surface results in production and workshop environments Precision finish tolerance 0.01 mm Fits CCMT 09T3 indexable inserts 65 mm cutting diameter for larger bores 32 mm shank, 190 mm overall length Accurate finishing for consistent part quality The design delivers repeatable precision in finishing cuts, enabling tolerances down to 0.01 mm for bore machining where surface condition and roundness are critical. By limiting material removal per pass, the tool reduces induced stresses and helps preserve bore geometry; this makes it well suited to applications requiring tight dimensional control. The integrated geometry and balanced mass distribution support a stable cut, which in turn improves surface finish and reduces the need for secondary operations. Stiffness and stability that reduce vibration and rework A robust 32 mm shank combined with a substantial body mass promotes rigidity at the cutting edge, lowering the risk of chatter during internal turning. The tool is optimised around a central cutting diameter of 65 mm, with a maximum cutting diameter capability of 80 mm, offering flexibility across a range of medium-sized bores. Compatibility with CCMT 09T3 indexable inserts allows rapid insert changes and predictable cutting behaviour, translating into lower toolholding costs and shorter set-up times for batch production. Practical geometry and easy integration into machining cells With a 190 mm overall length and a 130 mm cutting length, the bar fits common turret and toolpost arrangements while providing the reach required for deeper bores. The use of standard indexable inserts simplifies procurement and inventory management; spare inserts can be stocked without bespoke grinding or reconditioning. The construction balances reach with stiffness to maintain cutting performance without excessive overhang. For process planning, the tool allows straightforward parameter selection based on standard insert grades and cutting data. Production-oriented benefits and workshop support Specifying a tool with proven insert compatibility and a focus on finish turning reduces both tooling complexity and downtime in serial production. The combination of efficient changeover, stable cutting conditions, and a standard insert format supports predictable machining cycles and cost control. Technical advisors can provide specification checks and advice on insert grades and cutting data to match individual applications in industry and trade. For precision internal turning, specify the Teknik Makina THKB146TM boring bar and contact Metav Werkzeuge in Emmerich for tailored application advice and availability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THKB146TM Designation: Boring bar for finish machining Manufacturer: Teknik Makina ECLASS: 21041590 Facts Fine machining tolerance: 0.01 mm Cutting diameter (nominal): 65 mm Cutting diameter (max): 80 mm Overall length: 190 mm Cutting length: 130 mm Shank diameter: 32 mm Weight: 2.547 kg Special features Indexable insert type: CCMT 09T3 Application: finish machining SKU: THKB146TM FAQ What machining accuracy can be expected with this tool? The THKB146TM boring bar from Teknik Makina is designed for finish operations and can achieve a machining accuracy of 0.01 mm under appropriate setup and cutting conditions. Which inserts are compatible with the tool? Compatibility is provided for CCMT 09T3 indexable inserts, allowing use of common grades for finishing and easing procurement. For which bore diameters is the tool suitable? The bar is optimised for a nominal cutting diameter of 65 mm and supports a maximum cutting diameter of 80 mm depending on insert choice and machine capability. What are the length and weight specifications? Overall length is 190 mm, cutting length is 130 mm, and the tool weighs 2.547 kg, which aids in stability during internal turning. What provides the tool's rigidity during operation? The 32 mm shank diameter and robust body design contribute to rigidity and reduced vibration for consistent finish quality with the THKB146TM boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T-slot production thanks to a robust indexable-insert system and a rigid shank for reduced vibration and predictable tool life; take advantage of quick insert changes and consistent chip control for efficient machining. Order the T-slot cutter directly via Metav Werkzeuge or ask our consultants if needed. T-slot cutter TKC181TM — 65 mm diameter, for RD-- 1003 indexable inserts A T-slot cutter designed for efficient machining of T-slots using RD-- 1003 indexable inserts, offering a compact overall length and a rigid 22 mm shank for stable operation in production and workshop environments. T-slot cutter 65 mm diameter for heavy cuts Compatible with RD-- 1003 indexable inserts Shank 22 mm for rigid toolholding Six cutting edges for efficient material removal Faster T-slot cycles with reliable indexable inserts The combination of a 65 mm diameter cutter body and an insert-based system delivers consistent cutting geometry and predictable results across repeated operations. The use of RD-- 1003 indexable inserts and six cutting edges reduces the frequency of full-tool changes: when an insert reaches wear limits, it is simply replaced, restoring cutting performance immediately. This approach lowers machining downtime and simplifies inventory management compared with solid tools, while maintaining repeatable slot dimensions during medium- to high-volume runs. Stable clamping and improved surface quality A shank 22 mm diameter provides the necessary rigidity to minimise chatter and vibration during engagement in the slot. Secure clamping of the inserts is achieved with T15 Torx fastenings and M3.5x8.5 screws, ensuring the cutting edges remain seated under load. Reduced micro-movement at the seat improves surface finish and prolongs insert life, contributing to fewer interruptions and more predictable process yields in both workshop-level setups and stricter production environments. Practical efficiency for production and workshop use Designed with replaceable cutting edges, the tool lowers total cost of ownership by separating the wear component from the tool body. The compact overall length supports setups where clearance is limited while retaining the stability required for T-slot profiles. Labelling and SKU tracking — including TKC181TM — aid spare-part logistics and procurement processes, making it straightforward to match the cutter body with the correct insert type and fasteners. Quick maintenance and straightforward handling Insert replacement requires only the specified Torx key and a clean seating of the insert to preserve cutting geometry. The modular concept means maintenance is largely a matter of swapping inserts and verifying torque on the fixing screws, rather than reconditioning the whole tool. The relatively low body weight and familiar fastening standard speed up handling and reduce service time, which supports continuous production where fast tool turnaround is essential. Discuss application specifics with Metav Werkzeuge’s specialists to confirm fitment and maximise the cutter’s productivity in the intended workflow — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Product type: T-slot cutter Manufacturer: Teknik Cutting Tools SKU: TKC181TM Compatible inserts: RD-- 1003 Measurements Diameter: 65 mm Overall length: 120 mm Shank diameter: 22 mm Weight: 0.478 kg Number of cutting edges: 6 Mounting & fasteners Torx key required: T15 Fixing screw: M3.5x8.5 Label: 65 mm T-slot cutter RD-- 1003 L120 mm FAQ Which indexable inserts fit this cutter? The cutter is designed for RD-- 1003 indexable inserts; using the specified insert ensures correct seating and the intended cutting geometry for the Teknik Cutting Tools T-slot cutter (TKC181TM). How are the inserts secured and what tools are needed? Inserts are fastened with M3.5x8.5 screws tightened using a T15 Torx key; the specified torque and clean seat faces maintain stable clamping for the TKC181TM. What clamping arrangement is recommended for best stability? Use a rigid toolholder or arbor with a compatible 22 mm bore to match the shank 22 mm diameter; firm, vibration-free clamping supports optimal performance of the Teknik Cutting Tools T-slot cutter. How many cutting edges are active and what is the benefit? The cutter features six cutting edges, which distribute cutting forces and enable higher material removal rates with improved balance compared with fewer-edge alternatives. Does the cutter body require regrinding or resharpening? No; the design uses replaceable indexable inserts, so wear management is handled by replacing inserts rather than regrinding the tool body, simplifying maintenance for the TKC181TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the robustness of a 65 mm cutting diameter with compatibility for RD-- 12 indexable inserts and a 22 mm shank to ensure consistent T-slot production and reduced downtime; purchase the cutter directly via Metav Werkzeuge or consult our specialists for application advice. T-slot milling cutter TKC186TM (Teknik Makina) – 65 mm diameter, for RD-- 12 indexable inserts The T-slot milling cutter TKC186TM is a purpose-built tool for producing precise T-slots in industrial milling environments, designed for use with RD-- 12 indexable inserts and standard clamping systems. 65 mm diameter for robust T-slot cutting Designed for RD-- 12 indexable inserts 22 mm shank for secure clamping in holders Six cutting edges for efficient material removal Stable machining for repeatable slot quality With a substantial 65 mm diameter and a firm 22 mm shank, this cutter delivers enhanced rigidity that translates into improved surface finish and dimensional consistency. The tool’s geometry, combined with its six cutting edges, reduces chatter and spreads cutting forces, which is particularly important when integrating into automated or high-volume production. The result is lower scrap rates and predictable cycle times, helping to keep machining processes on schedule and within tolerance bands. Cost-efficient operation through indexable inserts Designed around RD-- 12 indexable inserts, the cutter enables rapid insert changes and consistent cutting performance without replacing the entire toolbody. This approach minimises tooling expenditure and shortens maintenance intervals: individual inserts can be rotated or replaced, restoring cutting quality quickly. For production planners, the main benefit is a clear reduction in inventory turnover for complete tools and a simpler approach to wear management and cost accounting. Straightforward integration and maintenance in workshops The tool’s overall length of 50 mm and a 23 mm cutting-length shank accommodate common clamp holders and tool presets while keeping the assembly compact. Fastening and maintenance follow standard practice, with Torx T15 drive and M3.5x8.5 screws for secure insert retention and easy servicing on the shop floor. At a nominal weight of 0.325 kg, the cutter balances rigidity with manageable handling during setup, aiding quick tool changes and seamless incorporation into existing tooling systems. For procurement and technical alignment, contact Metav Werkzeuge in Emmerich for personalised advice and supply by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TKC186TM Label: 65mm T-Nut Fräser RD-- 12 L50mm Product type: T-slot milling cutter Manufacturer: Teknik Makina Facts Diameter: 65 mm Overall length: 50 mm Shank diameter: 22 mm Cutting length (shank): 23 mm Number of cutting edges: 6 Weight: 0.325 kg Design & special features Compatibility: for RD-- 12 indexable inserts Fastening: Torx T15 Screw: M3.5x8.5 Suitable for integration in standard clamping systems SKU: TKC186TM FAQ What insert type does the cutter use? The cutter is specified for RD-- 12 indexable inserts, allowing quick replacement and rotation to restore cutting performance. Is the shank compatible with standard tool holders? Yes, the 22 mm shank is sized to fit common holder systems and provides the rigidity required for stable T-slot machining. How many cutting edges does the tool have and why does that matter? The tool has six cutting edges; this increases material removal efficiency and distributes wear for longer effective service life between insert changes. What fastening method secures the inserts? Inserts are retained with a Torx drive; the cutter uses Torx T15 and M3.5x8.5 screws for reliable and serviceable clamping. Can this cutter be used in automated production cells? Yes, the compact overall length and robust design make it well suited for automated setups where consistent slot quality and rapid insert changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, rigid tool head that combines a 66 mm diameter and a 90° cutting angle with internal coolant for improved chip control and surface finish; this results in steadier turning and less rework. Order the tool directly via Metav Werkzeuge or consult our specialists for tailored application advice. Corner tool head T968TM — 66 mm diameter, internal coolant by Teknik Makina Corner tool head T968TM is a robust indexable head designed for facing and shoulder turning with BOMT 1304 inserts, offering compact overhang and integrated coolant for stable machining. *66 mm diameter for compact setups *Internal coolant for direct cutting-edge cooling *Fits BOMT 1304 indexable inserts *90° cutting angle for precise shoulder operations Greater rigidity for consistent dimensional accuracy The larger 66 mm body provides improved stiffness compared with smaller heads, reducing vibration in demanding turning operations. With a 90° cutting angle, the head is tailored to shoulder and facing tasks where precise perpendicularity and consistent corner geometry matter. The relatively short 40 mm overall length reduces overhang, which translates into better concentricity and repeatable part quality. These design choices support higher machining stability, lowering scrap rates and minimising the need for secondary finishing. Controlled cooling and chip management for longer tool life Integrated internal coolant channels deliver cutting fluid directly to the insert zone, improving chip control and heat dissipation at the cutting edge. This targeted cooling reduces thermal load and helps maintain tool geometry, which extends tool life and preserves surface integrity on each workpiece. Better evacuation of chips from the cutting zone also reduces the risk of recutting, supporting uninterrupted cycle times and a cleaner workstation without complex external arrangements. Compatibility and straightforward maintenance to keep production moving The head is specified for BOMT 1304 indexable inserts and is compatible with inserts from Ingersoll, enabling fast interchangeability within existing tool sets. Fastening uses a M3.5x8.5 Torx screw and T10 key, enabling quick replacement and secure clamping without specialised tools. With a mass of 0.697 kg and a balanced design, the unit installs easily on compatible toolholders and contributes to predictable toolpath performance. Minimal maintenance and standard fasteners reduce downtime and simplify replacement in busy shops. Choose Teknik Makina engineering for dependable turning performance and contact Metav Werkzeuge for supply and application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: T968TM Manufacturer: Teknik Cutting Tools Designation: Corner tool head for BOMT 1304 indexable inserts Facts Diameter: 66 mm Overall length: 40 mm Weight: 0.697 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant Compatible with BOMT 1304 inserts Compatible with Ingersoll inserts Torx screw M3.5x8.5 Torx key T10 FAQ What insert type does this head accept? The corner tool head accepts BOMT 1304 indexable inserts and is compatible with inserts from Ingersoll for flexible tooling arrangements. Is there coolant delivery to the cutting edge? Yes, the unit features internal coolant that supplies lubricant directly to the cutting zone to aid chip evacuation and cooling. What is the cutting geometry and typical application? The head provides a 90° cutting angle, optimised for shoulder turning and facing where perpendicular edge control is required. What fasteners are used for insert clamping and maintenance? Insert clamping uses a M3.5x8.5 Torx screw and requires a T10 key for secure and quick servicing. What are the dimensions and mass for mounting considerations? Diameter is 66 mm, overall length 40 mm, and mass 0.697 kg, enabling compact installation with reduced overhang. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a compact Ø 66 mm cutting diameter, compatibility with RDMT 1604 indexable inserts and a secure 27 mm mounting bore delivers efficient material removal with low tool-change overhead; order the tool via Metav Werkzeuge or consult our specialists for configuration advice. Rundplattenfräser – Round insert milling cutter, Ø 66 mm for RDMT 1604 (Teknik Makina) A Rundplattenfräser designed for reliable face and peripheral milling using RDMT 1604 indexable inserts in workshop and production environments. Ø 66 mm cutting diameter for efficient material removal Compatible with RDMT 1604 indexable inserts Five cutting edges for stable cutting performance 27 mm mounting bore for secure attachment Faster cycle times through focused cutter geometry The combination of a compact Ø 66 mm head and five cutting edges provides a balance between material removal rate and tool stability. This geometry reduces vibration and allows higher feed per tooth without compromising surface finish, which translates into measurable productivity gains on medium-duty milling operations. For machining cycles where tool life and repeatability matter, the design shortens processing time and reduces the frequency of changeovers. Secure clamping and quick indexability minimise downtime Clamping is executed with standardised hardware: a locking screw M4x10, Torx screw M4.5x11 and Torx key T20 secure the inserts to the pocket plate BSP010, keeping insert seating consistent and repeatable. The 27 mm mounting bore ensures firm engagement with tooling arbors and adapters, while the overall length and mass distribution (approx. 0.495 kg) contribute to stable rotation and predictable balancing. These features simplify maintenance and support rapid insert changes with minimal adjustment. Standardised inserts reduce inventory complexity Built to accept RDMT 1604 indexable inserts, the cutter relies on a widely available insert format that many workshops and production lines already use. Standardisation of the cutting edge type means fewer unique spare components to stock and faster resupply when replacement inserts are required. The use of indexable inserts also keeps reconditioning costs down, as worn edges are replaced instantly rather than regrinding entire bodies. Serviceable components for continuous operation The modular construction prioritises serviceability: wearing elements are consumable inserts and standardised fasteners, allowing predictable maintenance intervals and simple on‑site replacement. This approach protects uptime and makes the tool suitable for both short production runs and repetitive tasks in larger batches. Clear identification of spare parts such as the pocket plate and screws supports efficient inventory management and faster repairs. Request a technical quotation or application advice from Metav Werkzeuge for the Teknik Cutting Tools round insert milling cutter T272TM (Ø 66 mm, compatible with RDMT 1604); Metav Werkzeuge can advise on tooling adapters and delivery — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: T272TM Manufacturer: Teknik Makina Product designation: Rundplattenfräser Description (EN): for RDMT 1604 Indexable Inserts Facts Diameter: 66 mm Cutting edges: 5 Overall length: 50 mm Mounting bore: 27 mm Weight: 0.495 kg eClass: 21180902 ETIM: EC011860 Special features Compatible inserts: RDMT 1604 Locking screw: M4x10 Torx screw: M4.5x11 Torx key: T20 Pocket plate: BSP010 FAQ What insert type is required for this cutter? The cutter is designed for RDMT 1604 indexable inserts; Teknik Makina supplies the T272TM body configured for this insert family to ensure correct seating and chip control. How is an insert secured in the pocket? Insert retention uses a locking screw (M4x10) together with a Torx screw (M4.5x11); the standard T20 Torx key applies torque consistently, allowing the round insert milling cutter T272TM to be serviced quickly. Which spindle or arbor interface is needed? The tool features a 27 mm mounting bore for engagement with common arbor systems; confirm adapter compatibility for the intended machine spindle before fitting the Teknik Makina T272TM cutter. Are spare parts and fasteners available separately? Spare pocket plates (BSP010), screws and retaining hardware for the T272TM are standardised items that simplify procurement and maintenance planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise face‑milling performance with a 66 mm diameter and internal coolant, combined with seven cutting edges for steady material removal; order this cutter head via Metav Werkzeuge or contact our consultants for specification support. Face milling head T487-2TM by Teknik Makina — 66 mm, internal coolant, for BLMP 0904 indexable inserts A Face milling head T487-2TM engineered for efficient face milling in industrial and workshop environments, compatible with BLMP 0904 indexable inserts and optimised for coolant‑assisted applications. *66 mm diameter for robust face milling *Internal coolant for improved tool life *Seven cutting edges for consistent material removal *Compatible with BLMP 0904 inserts (Taegutec) High productivity through engineered geometry and steady cutting The milling head combines a 66 mm tool body with a 100° cutting angle, providing a balance between material engagement and chip control. The tool’s geometry and seven cutting edges enable repeated index changes, which reduces the frequency of tool replacements and maintains a predictable cutting regime. This results in reliable cycle times and repeatable face finishes, making the component suitable for production runs where consistent surface quality and throughput are priorities. Coolant integration and fastening designed for safe operation Integrated internal coolant ensures directed cooling to the cutting zone and improved chip evacuation, reducing thermal load on the inserts and extending tool life. The head accepts Torx fastening with a T10 key and M3.5x8.5 Torx screws for secure insert clamping; these standardised fixings simplify maintenance and spare‑parts handling. Compatibility with BLMP 0904 indexable inserts from Taegutec allows straightforward tooling integration and access to established insert grades for different materials. Operational benefits that reduce downtime and support efficiency With a compact overall length of 50 mm and a modest mass of 0.675 kg, the cutter head reduces inertia and minimises additional load on the spindle, supporting quicker acceleration and more stable running at typical face‑milling speeds. The combination of robust construction and accessible insert changes means fewer interruptions on the shop floor and a lower cost per finished component. Where operational efficiency and predictable output matter, this configuration delivers measurable benefits in throughput and surface consistency. Workshop fit and supply reliability from a trusted partner The head is designed for use in diverse metalworking contexts and fits standard toolholders with a 22 mm mounting diameter. Sourcing through Metav offers the advantage of centralised procurement and a quality filter based in Emmerich, backed by decades of precision expertise. Metav’s broad product range and steady logistics support make it easier for workshops and vendors to maintain stocks of compatible inserts and fasteners, ensuring uninterrupted production and access to technical guidance when adapting tooling to specific materials. For tailored technical advice or to secure supply of this Teknik Makina face milling head with internal coolant, contact Metav Werkzeuge for personal consultation and reliable delivery from Emmerich Technical data SKU: T487-2TM Product type: Face milling head Manufacturer: Teknik Makina Compatible inserts: BLMP 0904 (Taegutec) Facts Diameter: 66 mm Mounting diameter: 22 mm Overall length: 50 mm Weight: 0.675 kg Cutting edges: 7 Cutting angle: 100° Special features Internal coolant Torx key requirement: T10 Torx screw: M3.5x8.5 Suitable for BLMP 0904 indexable inserts Label: 66mm Planmesserkopf BLMP 0904 L50mm mit Innenkühlung FAQ How many cutting edges does the head provide? The head offers seven cutting edges, delivering sustained productivity and multiple index positions before insert replacement is required. Which inserts are supported with this cutter head? This cutter head is compatible with BLMP 0904 indexable inserts; Taegutec inserts are explicitly suitable for this configuration. Is the tool suitable for coolant‑assisted machining? Yes, the head features internal coolant, which directs lubricant and cooling fluid to the cutting zone to improve chip evacuation and tool life. What fastening hardware is required for insert clamping? Insert clamping uses Torx screws sized M3.5x8.5 and a T10 Torx key for secure, standardised fastening. What are the key dimensions to check for holder compatibility? Key dimensions include a 66 mm diameter, 22 mm mounting/shank diameter and 50 mm overall length; confirm these against the machine toolholder specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 66 mm diameter, internal coolant and compatibility with RDMT 1604 indexable inserts for reliable face‑milling performance; order the cutter directly via Metav Werkzeuge or consult our specialists for application support. Round Insert Face Mill for RDMT 1604 with internal coolant (Teknik Makina) The Round Insert Face Mill for RDMT 1604 indexable inserts is a medium‑duty face‑milling head designed for stable material removal, with internal coolant for improved chip control and consistent surface finish. 66 mm diameter for wide coverage Internal coolant for improved tool life Compatible with RDMT 1604 indexable inserts Five cutting edges for consistent material removal Increase throughput with a robust cutting geometry The geometry of this milling head is optimised for steady stock removal: a 66 mm diameter delivers broader engagement per pass, while the configuration of the five cutting edges spreads cutting loads and reduces individual insert wear. This results in higher effective productivity on linear feed operations and less frequent index changes. For production environments seeking consistent cycle times, the head’s design supports repeatable cutting performance and helps maintain process stability at moderate spindle speeds. Better thermal management and chip evacuation for longer tool life The integrated internal coolant channel directs fluid close to the cutting zone, improving chip evacuation and reducing thermal load on the inserts. Lower cutting temperatures decrease the risk of premature edge degradation and micro‑cracking, extending usable edge life and reducing tooling costs over multiple regrinds or index cycles. In practice, improved evacuation also reduces recutting of swarf, which helps preserve surface quality and reduces unplanned rework. Simplified tooling logistics with standard indexable inserts Compatibility with RDMT 1604 indexable inserts simplifies inventory and tool‑change procedures: standard round inserts provide symmetrical cutting edges and permit straightforward indexing, while the compatible fastening system uses a T15 torx key and M4x10 torx screw for secure clamping. This standardisation supports predictable maintenance routines and reduces setup time during insert changes, benefiting workshops and job shops that value lean tooling management. Practical handling and secure mounting for everyday use With a 50 mm total length and a compact mass of roughly 0.495 kg, the cutter offers a balance between rigidity and ease of handling during tool changes. The head is supplied in the common face‑milling format and is suited to holders compatible with the same mount class; the secure screw and torx interface ensure stable seating of each insert under normal cutting conditions. Clear procedural maintenance—using the specified torx key and screw size—keeps downtime to a minimum and supports safe, repeatable operations. For tailored tooling recommendations or to secure the Teknik Makina T272-1TM with internal coolant from our Emmerich stock, contact Metav Werkzeuge for specialist advice and reliable supply. Technical data SKU: T272-1TM Product type: Round insert face mill Core dimensions Diameter: 66 mm Total length: 50 mm Weight: 0.495 kg Features & compatibility Insert type: RDMT 1604 indexable inserts Cutting edges: 5 Internal coolant: yes Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this milling head? The head accepts RDMT 1604 indexable inserts; this compatibility ensures standard insert sizes can be used and indexed to spread wear. How does the internal coolant affect performance? Internal coolant improves chip evacuation and reduces cutting temperatures, which in turn helps extend insert life and stabilise surface finish during longer cuts. What fastening components are required for insert changes? Insert clamping uses a T15 torx key and M4x10 torx screw, enabling secure seating and straightforward replacement procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com