Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a purpose-built 90° cutting head that combines secure Torx fastening, compatibility with ADKT 1505 indexable inserts and a compact 22 mm shank for stable mounting and repeatable results; order directly via Metav Werkzeuge or consult our specialists for application matching. Corner tool head T204TM – 90° cutting angle, for ADKT 1505 indexable inserts (Teknik Cutting Tools) The Corner tool head T204TM is a compact indexable-insert holder designed for precise 90° shoulder and corner machining with ADKT 1505 inserts in industrial turning and milling setups 90° cutting angle for shoulder machining Compatible with ADKT 1505 indexable inserts 22 mm shank diameter for secure mounting M4x10 Torx screw with T15 drive Consistent shoulder machining with indexable inserts The T204TM tool head delivers a 90° cutting angle and is optimised for shoulder and corner operations where perpendicular faces and repeatable dimensions matter. By accepting ADKT 1505 indexable inserts, the holder supports quick insert changes and reliable repositioning, which reduces downtime and maintains consistent cycle times. The combination of precise insert seating and rigid clamping ensures improved dimensional repeatability, lowering scrap rates and helping production hit tolerance windows more consistently. Secure clamping and compact geometry for reduced vibration A 22 mm shank and compact overall length of 45 mm create a well-balanced assembly that reduces overhang and vibration during heavy cuts. Fastening is achieved with an M4x10 Torx screw and T15 drive, providing a secure, repeatable clamp force that simplifies tool setting and maintenance. The holder’s compact 63 mm diameter profile and modest mass (0.565 kg) contribute to stability on the turret or arbor, improving surface finish and extending insert life under steady operational conditions. Compatibility and operational efficiency Designed for compatibility with ISCAR inserts and specified for ADKT 1505, the head supports multi-edge indexing—there are 6 cutting edges referenced—so inserts can be rotated to a fresh edge without changing the insert grade or geometry. This approach reduces inventory complexity and cuts consumable costs per component. Clear mechanical interfaces and standardised fastening mean the unit integrates smoothly into existing tool portfolios, enabling predictable cutting performance and faster job changeovers. Built for workshop reliability and supported supply The holder’s robust design focuses on dependable everyday use in production and job-shop environments. Backed by supply from Emmerich, Metav Werkzeuge emphasises steady availability and application advice to help match the component to specific machines and inserts. Technical documentation and measured dimensions allow fitment checks before installation, supporting a smoother commissioning process and reducing the risk of incorrect tooling choices. For specification checks, availability and tailored recommendations on the Teknik Cutting Tools Corner tool head T204TM, contact Metav Werkzeuge for expert advice and fast supply from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: T204TM Manufacturer: Teknik Makina Product: Corner tool head for ADKT 1505 indexable inserts Compatible with: ISCAR inserts Torx screw: M4x10 Torx key size: T15 Facts Shank diameter: 22 mm Weight: 0.565 kg Diameter: 63 mm Overall length: 45 mm Cutting angle: 90° Cutting edges: 6 Special features For ADKT 1505 indexable inserts 90° cutting geometry Compact, balanced design Secure Torx fastening Suitable for shoulder machining FAQ Which inserts fit this tool head? The holder is specified for ADKT 1505 indexable inserts and is compatible with ISCAR-style inserts following that designation. What fastener is required to secure the insert? Fastening uses an M4x10 Torx screw with a T15 drive; the design provides repeatable clamp force for reliable seating. Will the tool head fit my turret with a 22 mm bore? The tool head has a 22 mm shank, designed for secure mounting where that shank diameter is supported. How does the design reduce vibration and improve finish? Compact geometry (63 mm diameter, 45 mm overall length) and a balanced mass (0.565 kg) minimise overhang and vibration, improving surface finish and insert life. Can inserts be indexed to extend service life? Yes. The assembly supports multi-edge indexing of the ADKT 1505 inserts, allowing rotation to fresh cutting edges and reducing consumable change frequency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 90° cutting angle, compatibility with R390-1806 indexable inserts and a secure 22 mm shank to achieve consistent corner turning and short setup times. Order the component directly via Metav Werkzeuge or request application advice from the consultancy team. Corner turning head — for R390-1806 indexable inserts, 90° cutting angle (Teknik Makina) Corner turning head designed for 90° turning operations with R390-1806 indexable inserts, suitable for mounting on toolholders with a 22 mm shank. 90° cutting geometry for accurate corner turning Compatible with R390-1806 indexable inserts 22 mm shank diameter for secure mounting Torx clamping with M4x11 screw (T15 key) Consistent geometry for precision turning The 90° cutting angle guarantees repeatable corner profiles, which reduces the need for secondary machining and supports tight dimensional tolerances. The holder accepts R390-1806 indexable inserts, a widely used insert form that simplifies inventory and tool management. By pairing standard insert geometry with a stable tool head, machining cycles benefit from predictable forces and improved part-to-part uniformity. Secure clamping and reduced setup time A dedicated clamping arrangement using a Torx M4x11 screw actuated with a T15 key provides reliable seat retention and straightforward insert changes. The 22 mm shank ensures firm engagement with standard toolposts or toolholders, lowering vibration and improving surface finish. Faster insert swaps and consistent seating translate into higher machine uptime and fewer regrinds. Compact design suited to diverse turning operations With a 63 mm diameter and a total length of 45 mm, the compact form factor balances rigidity and accessibility in tight tool zones. The head incorporates 5 cutting edges, offering extended utility before indexation or replacement is required. At 0.49 kg, the component is lightweight enough for agile tool assemblies while remaining robust for industrial turning applications. Built for workflow reliability and efficiency Engineered as a component for indexable-turning systems, this tool head supports workflow optimisation by reducing fixture changes and set-up variability. Compatibility with inserts from established suppliers such as Sandvik helps streamline procurement and ensure proven cutting performance. The overall design contributes to predictable tool life and fewer interruptions on the shop floor. For precise application matching and to integrate the Teknik Cutting Tools corner turning head (Teknik Makina, SKU T424TM) into an existing tooling setup, contact Metav Werkzeuge for tailored technical advice and ordering support. Technical data Article number: T424TM ECLASS: 21181015 Manufacturer: Teknik Makina Designation: Corner turning head Designation (EN): for R390-1806 Indexable Inserts Numbers / Core technical data Diameter: 63 mm Shank diameter: 22 mm Total length: 45 mm Weight: 0.49 kg Cutting angle: 90° Number of cutting edges: 5 Design & special features Compatible inserts: R390-1806 Compatible insert brand: Sandvik Torx screw: M4x11 Torx key: T15 Compact design for tight tool zones FAQ Is the corner turning head compatible with Sandvik inserts? The corner turning head (Teknik Makina, SKU T424TM) is compatible with R390-1806 indexable inserts and is listed as suitable for inserts from Sandvik. What shank size is required for mounting? Mounting requires a 22 mm shank interface; the tool head is intended for holders and posts that accept that diameter. Which fastening hardware is used to secure the insert? Insertion and clamping are achieved using a Torx M4x11 screw; a T15 Torx key is specified for tightening. How many cutting edges are available before indexation? The head is specified with 5 cutting edges, extending interval between indexation or replacement depending on cutting conditions. Is the form suitable for tight corner turning and finishing? Yes, the 90° geometry and compact 63 mm diameter make it appropriate for corner turning and finishing tasks where access and repeatable geometry are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High material-removal rates and steady tool life result from the combination of a 63 mm diameter and 20 cutting edges, while the compatibility with APKT 1604 indexable inserts ensures efficient tool-cost management and rapid reconditioning. Order the cutter directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Indexable-insert milling cutter by Teknik Makina — Ø63 mm, 20 cutting edges A robust indexable-insert milling cutter engineered for high-volume milling and face operations, compatible with APKT 1604 indexable inserts and suited to modern toolholders. Ø63 mm diameter for high removal rates 20 cutting edges for consistent surface finish Compatible with APKT 1604 Korloy inserts 32 mm shank for secure toolholder mounting Maximise throughput with a multi-edge design The solid construction and 20 cutting edges are designed to distribute cutting forces and reduce per-edge load, which results in longer service intervals and more consistent cycle times. The generous Ø63 mm diameter increases chip volume per pass, helping to shorten machining cycles on suitable operations. Where indexable inserts are used, the running costs become primarily a function of insert life rather than full-tool replacement, so maintenance planning is simplified and total cost of ownership improves. The combination of geometry and insert type supports steady production flow without frequent interruptions. Straightforward integration into existing setups Engineered with a 32 mm shank, the milling head fits common toolholders for straightforward retrofitting into existing tool inventories. Compatibility with APKT 1604 indexable inserts—notably supplied by Korloy—means spare-part sourcing is simple and inventory overlap with other insert-based cutters is high. The cutter integrates into standard milling processes without the need for specialised fixtures, enabling easy adoption on benches and in CNC centres that use indexable-insert tooling systems. Quick serviceability reduces downtime Insert retention utilises M4x10 Torx screws that are accessed with a T15 drive, allowing rapid insert changes and straightforward torque application. The clear fixing method shortens maintenance cycles and minimises the time a machine is offline. At approximately 1.455 kg, the assembly offers a manageable mass for balancing and handling while remaining rigid enough for stable cutting. Spare inserts and fixings can be replaced quickly, turning routine upkeep into a short, predictable task rather than a production bottleneck. Suited to demanding milling applications The tool’s 75 mm cutting height and 100 mm overall length provide an extended cutting capacity for deeper engagements and profile work where indexable inserts are preferred. The modular nature of insert tooling supports tailored cutting strategies: switches between grades and geometries allow adaptation to evolving process needs without replacing the tool body. This flexibility supports both small-batch specialist work and larger production runs, delivering a dependable balance between performance and economical tooling practice. Contact Metav Werkzeuge for tailored application advice and order support for Teknik Makina tools; our consultants can confirm compatibility and availability and assist with spare-part planning Technical data SKU: HF52TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Core data Diameter: 63 mm Cutting edges: 20 Shank diameter: 32 mm Cutting height: 75 mm Overall length: 100 mm Weight: 1.455 kg Special features Compatible with APKT 1604 indexable inserts Suitable inserts from Korloy Torx screw: M4x10 Torx key: T15 For indexable-insert milling applications FAQ Which insert type is required for this cutter? The indexable-insert milling cutter accepts APKT 1604 inserts; Korloy is indicated as a compatible insert manufacturer for reliable supply and grades. What is the cutter diameter and how many teeth does it have? The cutter has a diameter of 63 mm and is equipped with 20 cutting edges to support high material removal rates and stable surface finish. What shank size and overall dimensions are specified? The tool uses a 32 mm shank, with a 75 mm cutting height and 100 mm overall length, offering extended engagement for deeper milling tasks. How are the inserts secured and what tool is required? Inserts are fastened with an M4x10 Torx screw; a T15 Torx driver is used for secure, quick insert changes. Is this cutter heavy to handle during balancing and setup? The cutter weighs approximately 1.455 kg, offering a balance between rigidity for cutting and manageability during handling and balancing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust turning solution that combines a 90° cutting angle and compatibility with BDMT 11T3 indexable inserts for reliable chip control and repeatable results; order via Metav Werkzeuge or consult our specialists for application guidance. Eckmesserkopf T535TM — indexable corner turning head with 90° cutting angle (Teknik Makina) Eckmesserkopf T535TM is an indexable corner turning head designed for short-reach turning and facing tasks using BDMT 11T3 inserts, delivering precise corner geometry in small-batch and series production. 90° cutting angle for precise corner turning Compatible with BDMT 11T3 indexable inserts 22 mm holder diameter for standard toolposts Secured with Torx M2.5x5.5 and T8 key Consistent geometry for accurate corner finishes The T535TM head is built to maintain a stable 90° cutting angle, which ensures repeatable corner profiles and reduced rework. Fitted for BDMT 11T3 indexable inserts, the assembly keeps insert positioning constant so that process variation is minimised. The compact head diameter of 63 mm and an overall length of 40 mm make this tool ideal where reduced overhang is required; the shorter projection reduces vibration and supports higher surface quality. This results in measurable time savings on finishing operations and a more predictable throughput. Fast, secure clamping that speeds cycle times Tool changes and secure fixation are handled via a Torx M2.5x5.5 screw, tightened with a T8 key, providing positive clamping without complex adjustments. The standard 22 mm holder diameter ensures compatibility with many common toolposts and quick-change systems, allowing straightforward integration into existing setups. At a net weight of 0.527 kg, the head balances rigidity with manageable handling during set-up, supporting efficient changeovers and minimal downtime—advantages that translate directly into improved machine utilisation. Broad compatibility and predictable performance Engineered for use with Kyocera-specified inserts and labelled for BDMT 11T3, the head suits turning operations across a range of ferrous and non-ferrous applications when the correct insert grade is selected. The tool’s construction and indexing concept promote consistent chip formation and easier control of cutting forces, which supports longer insert life when paired with suitable cutting parameters. For manufacturers seeking predictable cycle times and repeatable part geometry, this compact turning head offers a practical combination of stability and serviceability. For application-specific advice or to secure supply of this Teknik Cutting Tools indexable corner turning head, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com — our consultants provide guidance on compatibility, delivery and stock levels. Technical Data Article number: T535TM Manufacturer: Teknik Makina Product: Indexable corner turning head for BDMT 11T3 inserts SKU: T535TM Facts Diameter: 63 mm Shank / holder diameter: 22 mm Overall length: 40 mm Weight: 0.527 kg Cutting angle: 90° Suitable for inserts: BDMT 11T3 Torx screw: M2.5x5.5 Torx key: T8 Special features Compatible with Kyocera BDMT 11T3 indexable inserts Compact design for reduced overhang Positive Torx clamping for secure fixation Suited to short-reach turning and facing operations FAQ What inserts fit this turning head? The turning head accepts BDMT 11T3 indexable inserts; compatibility with Kyocera-specified grades is indicated for optimal fit and performance. Is the clamping hardware standardised? Yes, the head uses a Torx M2.5x5.5 screw tightened with a T8 key for rapid and secure insert fixation. Which holder diameter is required? A toolpost or holder with a 22 mm shank/acceptance diameter is required for correct mounting and rigidity. What machining tasks suit this head best? The T535TM is designed for short-reach corner turning and facing where a 90° cutting angle and compact geometry improve surface finish and reduce vibration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, precision-bodied solution that combines stable mounting and a true 90° cutting geometry for consistent square-shoulder turning; order directly via Metav Werkzeuge or consult the technical team for application support. Angled tool head T967TM — 90° cutting geometry, for BOMT 1304 indexable inserts (Teknik Cutting Tools) The Angled tool head T967TM is an angled indexable insert holder designed for secure mounting of BOMT 1304 inserts in square-shoulder turning and facing applications on compatible tool posts 90° cutting angle for square operations Ø63 mm head diameter for stability 22 mm shank mounting diameter Compatible with BOMT 1304 indexable inserts Higher process stability from a compact, rigid design The holder’s Ø63 mm head diameter and a compact overall length of 40 mm deliver a rigid contact area that reduces deflection in short overhang setups. This results in consistent chip formation and repeatable shoulder quality when machining interrupted cuts or shoulders. The component’s mass of 0.613 kg contributes to vibration damping without excessive inertia; such balance helps maintain cycle-time efficiency in high-mix turning operations while keeping toolpost loading predictable. Precise interface and secure clamping for indexable inserts A dedicated mounting bore of 22 mm ensures a standardised interface to tool posts and adaptors; the insert pocket is configured for BOMT 1304 indexable inserts from Ingersoll, providing stable seating and predictable rake orientation. The clamping uses a Torx screw M3.5x8.5 secured with a T10 key, which permits repeatable torque application and minimises insert seat wear. For operators who prefer defined fastening methods, this arrangement simplifies routine insert changes and reduces setup variability. Designed around a 90° cutting geometry for square-shoulder accuracy The fixed 90° cutting angle is a practical choice where square shoulders and perpendicular facing are required; the right-angle geometry supports fast approach paths and straightforward programming on CNC lathes. Explained for non-specialist buyers: a 90° tool head positions the insert so that the cut forms a true right angle to the workpiece axis, which simplifies gauging and reduces the need for secondary operations when producing shoulders, slots or precision faces. Built for compatibility and pragmatic workshop use Compatibility with established insert grades and the clear specification of mounting and fastening parts (screw and key type) makes integration into existing tool kits uncomplicated. The unit’s design is aimed at industrial workshops and jobbing shops that value reliability and predictable performance over unnecessary complexity. Technical buyers will appreciate the direct mapping between insert geometry, clamping hardware and mounting diameter, enabling straightforward inventory and quick change-out procedures for mixed-batch production. For procurement or application advice on Teknik Cutting Tools’ angled tool heads, contact Metav Werkzeuge to discuss the T967TM’s suitability for specific turning setups or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T967TM Manufacturer: Teknik Makina ECLASS: 21181015 Name: Angled tool head (Eckmesserkopf) for BOMT 1304 indexable inserts Facts Head diameter: 63 mm Shank mounting diameter: 22 mm Overall length: 40 mm Weight: 0.613 kg Cutting angle: 90° Cutting edges: 6 Special features Compatible with BOMT 1304 indexable inserts Matching insert manufacturer: Ingersoll Fastening screw: M3.5x8.5 Torx Required Torx key: T10 FAQ What inserts fit this holder? The angled tool head accepts BOMT 1304 indexable inserts; the pocket and clamp geometry are set to match that insert form, as supplied under SKU T967TM. Which insert manufacturers are supported? The holder is specified for Ingersoll-type BOMT 1304 inserts; this ensures correct seating and rake orientation for typical turning tasks. What is the required mounting diameter for the tool post? A 22 mm shank mounting diameter is provided; this dimension is the primary reference for selecting a compatible tool post adaptor or turret seat. How is the insert secured and which key is needed? Insert clamping is done with a Torx screw M3.5x8.5; a T10 Torx key is used for tightening to the recommended torque range Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable 90° geometry, a secure 22 mm shank and broad compatibility with XOMX 1204 indexable inserts to streamline turning operations. Order the tool directly via Metav Werkzeuge or request tailored advice from consultants to ensure optimal integration into existing tooling systems. Corner Turning Head — 90° indexable insert head, 22 mm shank (Teknik Makina) The Corner Turning Head is a right-angle tool head designed for machining with XOMX 1204 indexable inserts, offering robust support for precision turning and shoulder operations. 90° cutting angle for stable turning 22 mm shank for secure mounting Compatible with XOMX 1204 indexable inserts Torx screw M3.5x8.5 with T10 drive Improve process reliability with precise 90° geometry The 90° cutting angle of this corner tool head provides consistent contact between insert and workpiece, which reduces vibration and improves surface finish in right-angle cuts. Engineered for predictable engagement, the geometry supports repeatable cycles and helps to maintain tool life by distributing cutting forces evenly. For operations that rely on dimensional accuracy, the stable cutting interface translates into fewer set-up iterations and less rework. Fast integration into standard toolholders and quick insert change Designed with a 22 mm shank, the turning head fits common toolholder interfaces so that retrofitting is straightforward and downtimes are minimised. The indexable inserts of type XOMX 1204 are secured with a Torx M3.5x8.5 fastening and a T10 drive, enabling fast, secure clamping and quicker insert replacement. Clear mechanical fastening reduces preparation time on the shop floor and supports consistent clamping torque for repeat performance across shifts. Compact dimensions and proven compatibility for workshop efficiency With a nominal 63 mm diameter, an overall length of 40 mm and a mass of 0.618 kg, the tool head balances rigidity and compactness for confined setups. Fitted for six cutting positions, the design helps to extend available cutting life between indexings. Compatibility with SECO-manufactured inserts ensures access to widely available tooling grades, easing inventory management and enabling selection of grades optimised for the application at hand. Contact Metav Werkzeuge for specification guidance or compatibility checks on this Teknik Makina Corner Turning Head T514TM — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss integration into existing tooling systems Technical Data Article number: T514TM Product name: Eckmesserkopf / Corner turning head Manufacturer: Teknik Makina Numeric Data Shank diameter (mm): 22 Overall length (mm): 40 Diameter (mm): 63 Weight (kg): 0.618 Cutting angle (°): 90 Cutting edges: 6 Torx screw: M3.5x8.5 Special features Compatible with XOMX 1204 indexable inserts Suitable for SECO insert standards Torx drive: T10 Right-angle tool head for turning operations FAQ What inserts fit this corner tool head? The corner tool head accepts XOMX 1204 indexable inserts and is compatible with SECO-style insert geometries as specified for the T514TM tool. Is the shank size suitable for standard holders? With a 22 mm shank diameter, the head is intended for standard toolholder interfaces that accept a 22 mm mounting diameter. Which screw and driver secure the insert? Inserts are secured using a Torx M3.5x8.5 screw with a T10 drive, providing a secure and repeatable clamp. How does the 90° geometry affect machining results? The 90° cutting angle offers stable engagement for shoulder and right-angle turning, reducing vibration and improving dimensional consistency in finished parts. What are the physical dimensions and mass of the head? The head measures 63 mm in diameter, has an overall length of 40 mm and weighs 0.618 kg, offering a compact and rigid solution for tight setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact 22 mm shank and a stable 63 mm head diameter to secure precise turning and profiling with ADMT 1606 indexable inserts; order the corner tool head directly via Metav Werkzeuge or consult the specialists for application advice. Corner tool head T354TM — for ADMT 1606 indexable inserts, 22 mm shank The Corner tool head T354TM is a 90° turning and profiling head designed to hold ADMT 1606 indexable inserts for reliable machining of shoulders and corners in industrial turning applications. Compact 22 mm shank for reduced vibration Compatible with Walter ADMT 1606 inserts Secured with M4x10 Torx screw T15 63 mm head diameter with 90° cutting angle Increased process stability through a compact design The T354TM tool head pairs a 22 mm shank with a 63 mm diameter head to deliver improved rigidity and reduced chatter compared with longer, slimmer holders. This compact construction contributes to repeatable tool positioning and consistent surface finish, which is particularly valuable in batch production and short-cycle environments. The head accepts ADMT 1606 indexable inserts, a common standard in many workshops, enabling rapid insert changes and minimised downtime. Simple, secure clamping for consistent performance Clamping of the insert is achieved via an M4x10 Torx screw driven with a T15 key, providing a secure and straightforward fastening method familiar to machinists. The robust screw fixation supports reliable seat contact and preserves insert geometry under load, which translates into predictable tool life and fewer interruptions for re‑setting. Given the tool head’s mass of 0.578 kg, the assembly offers stable cutting behaviour without excessive inertia, helping to maintain toolpath accuracy and surface integrity. Practical integration and application benefits Designed specifically for ADMT 1606 inserts and marked by a 90° cutting angle, the holder is suited to corner turning, profiling and shoulder operations where accurate right‑angled geometry is required. Compatibility with inserts from established manufacturers such as Walter simplifies procurement and tool inventory. The combination of a standardised insert interface and a compact shank enables easy retrofitting into existing toolposts and modular tool systems, supporting efficient changeovers and reduced setup times on CNC lathes or turret heads. Contact Metav Werkzeuge for tailored application advice and ordering of the Teknik Makina T354TM corner tool head to ensure correct fitment and optimal machining performance Technical Data Article number: T354TM Manufacturer: Teknik Makina Model designation: Corner tool head T354TM For inserts: ADMT 1606 (indexable inserts) Shank diameter: 22 mm Weight: 0.578 kg Head diameter: 63 mm Overall length: 45 mm Number of cutting edges: 6 Cutting angle: 90° Compatible insert manufacturer: Walter Torx screw: M4x10 Torx key size: T15 Intended use: turning and profiling with ADMT 1606 inserts Brand: Teknik Makina FAQ What inserts fit this tool head? The corner tool head T354TM is designed for ADMT 1606 indexable inserts; inserts from Walter that conform to the ADMT 1606 form are compatible with the Teknik Makina holder. How is the insert secured in the holder? Insert clamping for the T354TM is by an M4x10 Torx screw, tightened with a T15 key to ensure a secure and repeatable seat. Which shank diameter is required for mounting? The tool head uses a 22 mm shank (Aufnahme 22 mm), enabling installation in toolposts and carriers that accept a 22 mm shank size. What operations is the holder best suited for? With a 90° cutting angle and a compact head, the T354TM is ideal for corner turning, profiling and shoulder machining where precise right‑angled features are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, precision-focused performance combines with secure fastening and straightforward compatibility: the head’s 90° cutting angle, compatibility with ANMX 1607 indexable inserts and a 22 mm shank offer reliable corner turning and easy integration into standard toolholders. Order the component directly via Metav Werkzeuge or consult our advisors for application guidance. Corner turning head T172TM — for ANMX 1607 indexable inserts, 90° cutting angle (Teknik Makina) A robust Corner turning head T172TM engineered for external turning and shoulder machining on CNC lathes, designed to accept ANMX 1607 indexable inserts and fit common 22 mm toolholder interfaces 90° cutting angle for precise corner cuts Compatible with ANMX 1607 indexable inserts 22 mm shank diameter for standard toolholders Torx M4.5x11 fastening, T15 key required Consistent corner quality with a proven geometry The tool head delivers a stable 90° cutting angle that simplifies shoulder and groove creation while reducing setup complexity. Its geometry is optimised for repeatable contact between insert and workpiece, which helps to maintain dimensional tolerances across batch production. The integrated interface for ANMX 1607 indexable inserts ensures quick index changes and predictable cutting behaviour, reducing the need for constant fine adjustment and supporting a smoother production flow. Secure clamping and straightforward integration Fastening with a Torx M4.5x11 screw and the corresponding T15 key provides a compact, reliable clamping method that minimises insert movement under load. The 22 mm shank is compatible with many standard holders, so the head integrates easily into existing tool posts and turret systems. As a consequence, retrofitting is quick and the downtime linked to tool changeover is reduced, supporting higher machine utilisation rates in series and jobbing environments. Practical shop-floor benefits and maintenance advantages Weighing 0.462 kg and measuring 40 mm overall, the head is compact without sacrificing rigidity; this balance supports stable cut conditions while remaining easy to handle during tool changes. The design accommodates five cutting edges, which spreads wear and contributes to longer service intervals for the tooling system. Reduced handling time and predictable maintenance cycles translate into lower operational interruption and clearer scheduling for production managers. Designed for efficiency in metalcutting workflows With a 63 mm diameter and a configuration tailored for external turning, the head helps to shorten set-up times and maintain surface finish quality in mixed-production settings. The product supports focused productivity improvements—by pairing a reliable holder with established ANMX 1607 inserts, cutting data can be standardised across similar operations. This rational approach to tooling selection prioritises throughput and process stability for workshops aiming to reduce variability. Secure production with Teknik Makina quality and Metav Werkzeuge supply — order via Metav Werkzeuge for fast availability and application advice tailored to the machining task. Technical Data Article number: T172TM Manufacturer: Teknik Makina Data Diameter: 63 mm Total length: 40 mm Shank diameter: 22 mm Weight: 0.462 kg Cutting angle: 90° Cutting edges: 5 Special features Compatible with ANMX 1607 indexable inserts Torx screw M4.5x11 Torx key T15 required Brand: Teknik Makina eClass: 21181015 FAQ What inserts fit this corner tool head? The head is designed for ANMX 1607 indexable inserts, ensuring direct compatibility and predictable cutting performance with that insert type. Which shank size is required for mounting the head? The head uses a 22 mm shank, suitable for standard toolholders and turret interfaces that accept that diameter. How is the insert secured to the turning head? Insert clamping is achieved via a Torx M4.5x11 screw; a T15 key is required for secure fastening and repeatable torque. Is the head suitable for high-volume production work? With a rigid geometry, standardised insert use and a compact mass of 0.462 kg, the head supports continuous production where consistent corner quality is needed. What is the cutting angle and how does it affect machining? The head provides a 90° cutting angle, optimised for shoulder cuts and right-angle turning tasks, improving dimensional accuracy and simplifying setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of precise geometry, secure Torx clamping and broad compatibility with LNMT 0804 indexable inserts for reliable shoulder and profile machining. Order the component directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Eckmesserkopf T224TM — 90° angle tool head for LNMT 0804 indexable inserts, Ø63 mm The Eckmesserkopf T224TM is an angle tool head engineered for precision shoulder cutting and finishing with LNMT 0804 indexable inserts, suited for industrial milling setups where compactness and repeatable geometry are required 90° cutting angle for clear shoulder cuts Compatible with LNMT 0804 indexable inserts Ø63 mm body with 22 mm mounting diameter Torx M2.5×7 clamping screw, T8 key required High-precision geometry for consistent shoulder cuts The compact head geometry provides a defined 90° cutting angle, which is essential for square shoulders and precise contour transfers. The deliberate combination of a Ø63 mm body and a 22 mm mounting diameter produces a rigid assembly that reduces vibration and run-out. This stability translates into improved surface finish and repeatable dimensional results, making the component suitable for serial work where tight tolerances must be maintained. Built for reliable insert clamping and quick indexing Secure retention of the indexable grade is ensured by the Torx M2.5×7 clamping screw operated with a T8 key, offering a predictable torque interface for safe insert locking. The mechanical design allows fast index changes of the LNMT 0804 insert type, minimising machine downtime. Where frequent insert rotation is part of the process, the defined clamping system reduces the risk of misalignment and helps maintain consistent cutting geometry over many cycles. Compact form factor that supports efficient tool management With an overall length of 40 mm and a mass of 0.665 kg, the head occupies little axial space while contributing positive stability to the tool assembly. The compact footprint is advantageous in tight setups or when multiple toolheads are mounted on small turrets. The head’s dimensions and weight aid in predictable dynamic behaviour during high-speed indexing or short-reach machining, which supports cycle-time optimisation without sacrificing process control. Compatibility and workshop integration for straightforward procurement Designed for use with LNMT 0804 indexable inserts and noted compatibility with ISCAR insert variants, the head fits common industrial insert standards to simplify stocking and logistics. The combination of established insert formats and an accessible clamping standard helps to reduce the variety of spare parts required on the shop floor. When paired with consistent measuring and set-up procedures, the head supports efficient changeover routines and predictable production output. For precision corner machining with LNMT 0804 inserts, rely on the Teknik Makina T224TM and contact Metav Werkzeuge for tailored guidance and guaranteed supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T224TM Manufacturer: Teknik Makina Compatible inserts: LNMT 0804 Compatible insert manufacturer: ISCAR Clamping screw: Torx M2.5×7, key T8 Numeric data Diameter: 63 mm Mounting diameter: 22 mm Total length: 40 mm Weight: 0.665 kg Cutting angle: 90° Design & features For LNMT 0804 indexable inserts Compatible with ISCAR inserts Torx clamping screw for secure retention Compact head for constrained set-ups Number of cutting edges: 9 FAQ Which insert type is required for this head? The head accepts LNMT 0804 indexable inserts, specified in the product data and noted for compatibility with ISCAR variants. What is the required mounting diameter? Mounting is specified as 22 mm (aufnahme mm d), providing a rigid connection to standard toolholders. How is the insert clamped and what key is needed? Clamping is via a Torx M2.5×7 screw; a T8 Torx key is specified for tightening and loosening. What operations is this head best suited for? The geometry and 90° cutting angle suit accurate shoulder milling and profile finishing where defined right-angle features are required. What is the SKU for ordering or referencing? The SKU is T224TM, referenced as the Teknik Makina angle tool head for LNMT 0804 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 90° cutting geometry with a 63 mm head diameter and a secure 22 mm shank, this corner cutter head ensures stable shoulder machining and reliable insert clamping; order the component directly via Metav Werkzeuge or contact our consultants for application-specific advice. Corner cutter head T184TM – 90° head for APKT 1604 indexable inserts by Teknik Makina The Corner cutter head T184TM is a compact indexable insert holder engineered for precise 90° shoulder and profile machining using APKT 1604 indexable inserts. 90° cutting angle for precise shoulder cuts 63 mm head diameter for stable machining 22 mm shank diameter for secure mounting Compatible with APKT 1604 inserts by Korloy Accurate perpendicular faces through stable geometry The 90° cutting angle delivers consistent, perpendicular shoulder faces that reduce secondary operations and simplify fixture set-up. With a 63 mm head diameter, the design increases mass at the cutting zone to damp vibrations and improve surface finish during interrupted cuts. The head accommodates five cutting edges, enabling repeatable engagement geometry that supports predictable tool life and process stability in mixed production environments. Secure clamping and straightforward maintenance A 22 mm shank diameter provides a robust mounting that resists micro‑movement under load, while the overall mass of 0.577 kg contributes to axial and radial stability. Insert retention is achieved with an M4x10 Torx screw, tightened using a T15 key for reproducible clamp force and safe removal without specialised tooling. These practical fastening details reduce downtime during index changes and simplify routine inspections, supporting sustained throughput in small to medium batch runs. Broad insert compatibility and workshop integration Designed for APKT 1604 indexable inserts and tested for use with Korloy grades, the tool head integrates into common tooling kits and helps streamline inventory. The modular holder adapts to standard insert geometries, enabling economical regrinding and quick replacement cycles. Metav's product selection focuses on pragmatic interoperability: shops benefit from fewer bespoke holders and faster tool changes, while maintenance teams appreciate the use of common Torx hardware and widely available inserts. Discuss machining requirements with Metav Werkzeuge to confirm the best Teknik Cutting Tools corner cutter head configuration for specific materials and to arrange supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T184TM Manufacturer: Teknik Makina For inserts: APKT 1604 Indexable Inserts Compatible insert manufacturer: Korloy Torx screw: M4x10 Facts Head diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.577 kg Cutting angle: 90° Number of cutting edges: 5 Special features Torx key: T15 Compatible with APKT 1604 inserts Designed for secure insert clamping Compact design for shoulder and profile machining FAQ Which inserts fit this tool head? The Corner cutter head T184TM accepts APKT 1604 indexable inserts; compatibility with Korloy grades is specified for common machining applications. What mounting diameter is required? Mounting requires a 22 mm shank diameter, which provides a rigid connection to the toolholder or arbor. How are inserts secured in the head? Inserts are clamped using an M4x10 Torx screw, tightened with a T15 key, ensuring repeatable clamp force and straightforward replacement. What cutting angle does the head provide and what is it best for? The head provides a 90° cutting angle, making it suitable for perpendicular shoulder machining and profile work where defined right‑angle faces are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid S50U shaft and left-hand cutting orientation to secure consistent internal turning results while keeping set-up time low. Order the component directly through Metav Werkzeuge or contact the technical team for confirmation of machine compatibility. K540TM boring bar — MTWN for TNMG indexable inserts, left-hand, S50U shaft (Teknik Makina) A robust K540TM boring bar designed for internal turning with MTWN geometry, compatible with TNMG 1604 indexable inserts and optimised for left-hand cutting applications. Left-hand cutting orientation for internal turning Compatible with TNMG 1604 indexable inserts S50U shaft with 50 mm diameter for rigidity 350 mm overall length for deep bore reach Stability and repeatable results from a rigid shaft The design centres on a S50U shaft with a 50 mm diameter, delivering increased rigidity that reduces vibration under load. Combined with the substantial mass (approx. 5.121 kg), this stability translates into more consistent chip formation and improved surface finish during internal machining. The 107.5° cutting angle is engineered to balance cutting forces and insert life, which helps to maintain dimensional accuracy across longer cycles. Reduced changeover and versatile insert handling Compatibility with TNMG 1604 indexable inserts and the MTWN tool geometry means fewer tool variants in the tooling cabinet and quicker insert changes at the machine. A 65 mm cutting height and 350 mm overall length provide the physical reach and clearance needed for deeper bores without compromising support. This combination of insert standardisation and tool reach reduces downtime and simplifies process planning for small- to medium-batch production. Practical integration and application-focused details The device carries the ISO designation S50U MTQNL and is specified for left-hand cutting; it is supplied for use with a clamping holder marked as 16, ensuring compatibility with common mounting systems. The construction is intended for industrial lathe environments where internal turning with indexable inserts is standard practice. For workshops seeking a reliable boring solution from Teknik Makina, the tool’s geometry and dimensional data make it straightforward to assess fitment and to integrate into existing tool cycles without excessive trial runs. Contact Metav Werkzeuge in Emmerich for precise fitment advice and availability; call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm machine compatibility and secure the K540TM boring bar from local stock Technical data Article number: K540TM Manufacturer: Teknik Cutting Tools Designation: MTWN for TNMG indexable inserts Facts Shaft diameter: 50 mm Diameter: 63 mm Cutting height: 65 mm Overall length: 350 mm Weight: 5.121 kg Cutting angle: 107.5° eClass: 21180806 Special features ISO designation: S50U MTQNL Compatible inserts: TNMG 1604 Cutting direction: left Clamping holder designation: 16 FAQ What inserts does this boring bar accept? The boring bar is compatible with TNMG 1604 indexable inserts and is configured for MTWN insert geometry to ensure correct seating and cutting performance. Is the cutting direction left-hand or right-hand? This tool is specified for left-hand cutting; the left-hand orientation is integrated into the K540TM design and the MTWN geometry. What are the key dimensions to check for machine fitment? Key dimensions include a 50 mm shaft diameter, 63 mm outer diameter, 350 mm overall length and 65 mm cutting height; these values help determine clearance and holder compatibility for the K540TM boring bar. Which ISO designation identifies the shaft and holder type? The product is marked with the ISO designation S50U MTQNL, indicating the shaft standard and mount style used on this boring bar. What clamping holder is recommended for this tool? The tool is listed with a clamping holder designation of 16, which should be matched to the machine’s compatible toolholding system for secure mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, precision-engineered boring bar that pairs rigidity with proven insert compatibility to deliver consistent internal finishing. Benefit from the combination of stable clamping, clear dimensional data and straightforward workshop integration — order the tool directly via Metav Werkzeuge or consult our specialists for application advice. S50U MTUNL Boring bar — MTUN for TNMG indexable inserts, 50 mm shaft, left-hand The S50U MTUNL is a left-hand boring bar designed for internal turning with TNMG 2204 indexable inserts, optimised for medium- to heavy-duty CNC lathe operations Left-hand cutting for internal turning 50 mm shaft for improved rigidity Compatible with TNMG 2204 inserts 65 mm cutting height for deeper bores High-rigidity design for consistent bore quality The holder’s 50 mm shaft and substantial body diameter create a stable cutting platform that reduces vibration and runout during internal machining. A cutting angle of 93° and a cutting height of 65 mm provide a geometry that supports accurate chip control and repeatable bore form; this results in fewer reworks and shorter cycle times in batch production. The substantial mass (approx. 5.145 kg) contributes to damping, which is particularly beneficial when machining longer bores or using interrupted cuts. In practical terms, the design translates into improved surface finish and tolerance adherence for turning operations on CNC lathes. Proven insert compatibility and economical tooling Built for TNMG 2204 indexable inserts, the toolholder accepts widely available turning grades, simplifying inventory and replacement logistics. Secure clamping and an ISO designation (S50U MTUNL) ensure a correct seating for the insert, supporting reliable tool life and easier index changes. The combination of standard insert form and robust clamping reduces unplanned downtime: worn edges can be indexed or changed quickly, lowering per-part tooling cost and keeping production moving. Where specialist grades are required, the holder’s compatibility allows selection of grades optimised for steel, cast iron or stainless applications without changing the holder. Workshop integration, handling and safety considerations The boring bar’s overall length of 350 mm and outer diameter 63 mm make it suitable for common internal turning set-ups; the clamping seat marked as 22 provides a clear reference for mounting into compatible toolposts or revolver turrets. The left-hand cut orientation is intended for specific spindle and turret arrangements—ensuring the correct cutting direction prevents unexpected tool engagement. Regular inspection of the clamping screw and insert pocket is recommended to maintain repeatability; balanced mounting and correct toolholding torque are practical steps that preserve accuracy. For complex applications or interference checks, Metav Werkzeuge can advise on integration and suitable insert grades. Contact Metav Werkzeuge for tailored application advice, mounting recommendations and delivery from our Emmerich warehouse — Metav’s specialists are available to verify suitability for the intended CNC process Technical data Article number: K532TM Manufacturer: Teknik Makina Core measurements Shaft diameter: 50 mm Cutting height: 65 mm Weight: 5.145 kg Cutting angle: 93° Outer diameter: 63 mm Overall length: 350 mm Special features ISO designation: S50U MTUNL Application: MTUN for TNMG indexable inserts Compatible inserts: TNMG 2204 Cutting direction: left Clamping seat reference: 22 FAQ What insert type is recommended for this boring bar? The boring bar is designed for TNMG 2204 indexable inserts; these provide standard geometry and are widely available for varied workpiece materials. Is the tool suitable for deep internal turning on CNC lathes? With a 350 mm overall length and a 50 mm shaft diameter, the bar offers increased rigidity for deeper bores; appropriate mounting and balancing are required for best results. Which cutting direction does the holder use? This holder is configured for left-hand cutting, intended for setups where the tool engages from the left relative to spindle rotation. How does the S50U MTUNL affect cycle times and surface finish? The rigid shaft and 93° cutting geometry support reduced vibration, which helps to improve surface finish and can shorten cycle times through more stable cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise fit for WNMX 1305 indexable inserts and a 63 mm diameter body with four cutting edges for balanced, efficient face milling; order via Metav Werkzeuge or contact our consultants for technical advice. Face milling head for WNMX 1305 indexable inserts — 63 mm diameter | Teknik Makina Face milling head for versatile face milling operations; compatible with WNMX 1305 indexable inserts and designed for secure mounting in CNC tooling systems 63 mm diameter for stable cutting Four cutting edges for efficient material removal 22 mm shank diameter for secure mounting Compatible with Korloy WNMX 1305 inserts Optimised geometry for reliable face milling results The face milling head delivers a purposeful balance between rigidity and accessibility. With a 63 mm diameter, the body inherently reduces vibration during engagement, which supports consistent surface finish and predictable tool life. The head accepts WNMX 1305 indexable inserts, a widely used insert form, enabling straightforward replenishment and rapid index changes. For production environments seeking consistent cycle times, this geometry reduces variation and contributes to measurable process stability. Secure mounting and straightforward assembly to cut downtime A solid 22 mm shank diameter and the supplied M4x10 Torx fastening ensure a firm connection to the tool holder, reducing the risk of loosening under intermittent loads. The head uses a Torx T15 key interface for the clamp screw, which simplifies maintenance and standardises fastener tools across the workshop. These assembly features help to shorten intervention times during insert changes and support predictable maintenance intervals, improving overall shop-floor efficiency. Practical design that supports everyday workshop needs The cutter is furnished with four cutting edges, arranged to offer even bite and load distribution across the cut. This arrangement helps to maintain balance during rotation and to split cutting forces evenly, which is particularly beneficial for face-facing and shallow shoulder operations. Compatibility with Korloy WNMX 1305 inserts broadens the choice of grades and geometries, allowing selection for finishing or light roughing without changing the body — a pragmatic route to flexible machining strategies. Why Metav supply and Teknik Makina quality matter Sourced from Teknik Makina and distributed via Metav Werkzeuge, the component benefits from a tested supply chain and accessibility across Europe. Metav’s emphasis on precision democratisation means the head is available with transparent logistics from Emmerich, backed by a decades‑long product range that reduces vendor complexity in busy procurement processes. For decision-makers, the combination of a purpose-built cutter body and reliable distribution translates into fewer supply interruptions and clearer expectations for production planning. Contact Metav Werkzeuge for a personalised specification check or to arrange a procurement consultation for the Teknik Makina face milling head T687TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing tool holders and insert grades Technical Data Article number: T687TM Manufacturer: Teknik Makina Product: Face milling head for WNMX 1305 indexable inserts Core technical data Diameter: 63 mm Overall height: 50 mm Cutting edges: 4 Shank (toolholder) diameter: 22 mm Fastening screw: M4x10 Torx key size: T15 Special features Compatible with Korloy WNMX 1305 indexable inserts Secure Torx clamping system Balanced design for reduced vibration Designed for straightforward insert replacement FAQ Which insert type fits this milling head? The face milling head T687TM is designed specifically for WNMX 1305 indexable inserts and is compatible with Korloy WNMX 1305 grades. What is the shank diameter and how is the head secured? The cutter features a 22 mm shank and is secured using an M4x10 Torx screw tightened with a T15 key. How many cutting edges does the head provide and what is the benefit? The head has four cutting edges, which deliver balanced cutting forces and support consistent surface finishes during face milling. Is the body suitable for fast insert changes in production? Yes, the design and standard Torx clamping permit rapid insert changes and straightforward maintenance, reducing downtime for tooling swaps. Who supplies this component and what is the SKU for ordering? The item is supplied by Teknik Makina and listed as SKU T687TM for ordering and reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, high-precision face milling head that combines sturdy mounting, a balanced 63 mm diameter and a 45° cutting geometry for reliable surface finish and controlled chip flow. Choose direct supply through Metav Werkzeuge for consistent availability or contact Metav’s consultants for technical clarification. Face milling head for SNMU 1305 indexable inserts — 63 mm, 6-edge cutting head (Teknik Makina) The Face milling head for SNMU 1305 indexable inserts is a compact cutting head engineered for stable face milling and high repeatability in small to medium production runs. Compact 63 mm diameter for tight spaces Six cutting edges for continuous cutting M5x12 Torx fastening with T20 key Compatible with ISCAR SNMU 1305 inserts Secure mounting for stable machining and predictable results The head is engineered with a 22 mm bore to ensure a secure fit on standard tool holders, combined with an M5x12 Torx screw and T20 key drive for positive clamping. This fastening arrangement reduces micro-movement at the tool–holder interface, which in turn lowers vibration and improves surface quality during interrupted or full-width face milling. The result is consistent geometry control and fewer rework cycles. Predictable cutting behaviour and improved surface finish A 45° cutting angle together with six cutting edges creates evenly distributed cutting forces and continuous engagement across the face. The 63 mm diameter balances contact area and stiffness, producing a smoother finish with reduced risk of chatter in typical workshop setups. The assembly’s mass (approx. 0.645 kg) and overall height (44 mm) contribute to a compact centre of gravity that supports stable operation at moderate spindle speeds. Broad insert compatibility for flexible tooling strategies Designed specifically for SNMU 1305 indexable inserts, the head accepts inserts from ISCAR, enabling the use of widely available geometries and grades. This compatibility supports flexible tooling strategies: abrasive, semi-finishing or finishing inserts can be used depending on the chosen insert grade and geometry, without changing the holder. The modular approach shortens changeover times and helps maintain productivity across varied part families. Serviceability and workshop efficiency explained Carbide inserts are replaced without full disassembly thanks to the accessible Torx screw system, which accelerates maintenance and reduces downtime. The head’s simple interface and common fastening standard make it a practical choice for production shops seeking reliable repeatability and straightforward spare parts handling. Metav Werkzeuge’s stocking and distribution reduce lead times and act as a regional quality filter for workshop supply chains. Contact Metav Werkzeuge for expert advice on Teknik Makina components and to arrange direct supply of this face milling head with 63 mm diameter and SNMU 1305 compatibility Technical data Article number: T235TM Manufacturer: Teknik Makina Fits inserts: SNMU 1305 (ISCAR) SKU: T235TM Numbers / core technical data Diameter: 63 mm Overall height: 44 mm Bore / shank diameter: 22 mm Number of cutting edges: 6 Weight: 0.645 kg Cutting angle: 45° Torx screw: M5x12 Special features / versions Compatible insert manufacturer: ISCAR Fastening key size: T20 Intended use: face milling with indexable inserts Files: 64e8a0e77cf48d9e17c0d1df, 64e8a12911e3b4da1987f08a FAQ What insert type does this milling head accept? The face milling head accepts SNMU 1305 indexable inserts, compatible with ISCAR geometries and grades for face-milling applications. Which fasteners are required for insert clamping? Insert clamping uses an M5x12 Torx screw tightened with a T20 key on the Teknik Makina face milling head (SKU T235TM). What are the key dimensional constraints to check before ordering? Confirm the 63 mm head diameter and 22 mm mounting bore match the available tool holder; the overall height is 44 mm and weight is approx. 0.645 kg. Is the head suitable for quick insert changes on the shop floor? Yes; the accessible Torx screw system on the face milling head allows rapid insert replacement and straightforward maintenance using a standard T20 key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust build quality, precise mounting and fast insert changes to keep production steady and predictable; order or request configuration advice from Metav Werkzeuge for tailored integration into existing toolholders. Face milling head T730TM – 63 mm diameter, 22 mm mounting for LNMU 0303 inserts (Teknik Makina) Face milling head T730TM designed for precision face milling with LNMU 0303 indexable inserts, suitable for finishing and light roughing in professional CNC and turning centres. Compact Ø63 mm body for stable operation 22 mm mounting diameter for standard holders Fits LNMU 0303 indexable inserts Torx T8 fixation with M2.5×7 screws Consistent surface quality through compact design The face milling head offers a compact body with a Ø63 mm diameter and an overall height of 50 mm, delivering a stable tool geometry that reduces vibration during face milling. The design supports consistent chip evacuation and predictable cutting forces, which in turn improves surface finish and reduces rework. For operations that demand repeatable results, a stable cutter body limits chatter and enables tighter process tolerances, translating into measurable savings on downstream operations. Quick tool changes and secure clamping for reduced downtime Equipped for efficient maintenance, the head uses a Torx T8 drive and M2.5×7 fixing screws to secure the inserts. This fixation method allows fast, reliable insert replacement with commonly available tools, shortening non-productive time at the machine. The 22 mm mounting diameter is compatible with many standard holders, ensuring secure seating in the tool turret or holder and preserving concentricity. Reduced changeover time and straightforward serviceability contribute directly to higher machine uptime and lower labour costs. Broad compatibility for workshop integration The cutter is configured for LNMU 0303 indexable inserts, making it suitable for a wide range of face-milling tasks where small triangular inserts are preferred for good edge stability and easy indexing. The head features nine cutting positions (9 cutting edges) to balance cutting capacity and chip distribution in interrupted cuts. Supplied by Teknik Makina, the unit is engineered to match common industrial toolholding standards so it can be integrated into mixed fleets without complex adapter work, supporting a rational consolidation of tooling across machines. For tailored advice on integrating the Face milling head T730TM into an existing toolset or to request a specification sheet, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for a customised recommendation and rapid supply arrangement. Technical data SKU: T730TM Manufacturer: Teknik Makina Product: Face milling head for LNMU 0303 indexable inserts Torx key: T8 Torx screw: M2.5×7 Core dimensions Diameter: 63 mm Overall height: 50 mm Mounting diameter: 22 mm Cutting edges: 9 Features & compatibility Compatible inserts: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE eClass: 21180902 FAQ Which insert type fits the milling head? The head is designed for LNMU 0303 indexable inserts; the Face milling head T730TM secures these inserts for efficient face milling with small triangular cutting edges. What is the required mounting diameter? Mounting requires a 22 mm toolholder interface; the 22 mm dimension ensures proper seating and concentricity in standard holders. How are the inserts fixed to the head? Inserts are secured with Torx T8 fastenings using M2.5×7 screws, allowing quick and reliable replacement on the Teknik Makina milling head (SKU T730TM). For which applications is this milling head suited? Best suited to precision face milling and light roughing, the head provides stable cutting for finishing passes where consistent surface quality is required. How many cutting edges are available per head? The cutter carries 9 cutting edges, offering a balance between cutting capacity and chip control for interrupted and continuous cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust build quality, a compact Ø63 mm head and a precise 45° cutting angle to boost face-milling efficiency while keeping changeover times short. Order the cutter head directly via Metav Werkzeuge or consult our specialists for application advice. Face-milling head T780TM by Teknik Cutting Tools — 45° cutting angle, Ø63 mm The Face-milling head T780TM is a compact, high-stability cutter head designed for face milling with ONMX 0806 indexable inserts in industrial and job-shop milling applications 45° cutting angle for efficient face milling Ø63 mm head for compact tool envelopes Compatible with ONMX 0806 indexable inserts 22 mm shank diameter for secure clamping Torx M5x12 screw, T20 key for quick assembly Improved cutting performance for shorter cycle times The T780TM combines a 45° cutting angle with a compact Ø63 mm diameter to reduce cutting forces and improve chip flow during face milling. This geometry lowers radial load on the spindle and enables higher feed rates without compromising surface finish. Where stability and predictable performance are required, the head’s configuration with five cutting edges ensures consistent engagement and smooth material removal. The result is measurable productivity gains on components requiring flat faces or shoulder operations. Fast insert changes and broad compatibility reduce downtime Engineered for practical shop-floor handling, the milling head accepts ONMX 0806 indexable inserts and is compatible with major insert brands such as ISCAR, Korloy, LMN and YG‑1, allowing easy sourcing of cutting grades. Insert clamping is secured with a Torx M5x12 screw operated by a T20 key, providing rapid, repeatable index changes and minimal tooling downtime. The 22 mm shank offers a familiar mounting size for many toolholders, helping to streamline tool inventories and setup time. Built for reliable workshop operation and straightforward integration With an overall length of 40 mm and a mass of 1.063 kg, the head balances rigidity and manageable mass for use in both high-volume milling cells and flexible manufacturing environments. The compact design supports tighter tool envelopes and easier clearance management on multi‑axis machines. Documented dimensions and the head’s compatibility with standard ONMX 0806 inserts mean integration into existing tool systems is straightforward, reducing engineering overhead and ensuring reliable repeatability in production. Contact Metav Werkzeuge to discuss suitability for specific materials and cutting conditions and to secure the Teknik Cutting Tools Face‑milling head T780TM for your production line Technical data Article number: T780TM Manufacturer: Teknik Makina Product: Face-milling head (Planmesserkopf) Compatible inserts: ONMX 0806 Compatible insert manufacturers: ISCAR, Korloy, LMN, YG-1 eClass: 21180902 Facts Diameter: 63 mm Cutting angle: 45° Shank diameter (D): 22 mm Overall length: 40 mm Weight: 1.063 kg Number of cutting edges: 5 Special features Torx screw: M5x12 Torx key size: T20 Suited for ONMX 0806 indexable inserts Compact head for constrained tool envelopes FAQ What insert type does this milling head accept? The face-milling head accepts ONMX 0806 indexable inserts, specified for the T780TM and suitable for common facing tasks. Can existing inserts from other brands be used? Yes, the head is compatible with inserts from ISCAR, Korloy, LMN and YG‑1, allowing the use of familiar cutting grades with the T780TM. Which toolholder shank diameter is required? The cutter head has a 22 mm shank diameter and is designed for toolholders that accept a 22 mm mounting. How are inserts secured to the head? Inserts are fixed with a Torx M5x12 screw; the recommended key for assembly and indexing is a T20. Is the head suitable for tight tool envelopes on multi‑axis machines? The compact Ø63 mm head and 40 mm overall length make the T780TM well suited to operations with limited clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise compatibility with SDMT 09T3 indexable inserts and the compact Ø63 mm cutter body to maintain efficient face‑milling operations; robust Torx fastening and a 22 mm shank support secure clamping and quick insert changes. Order the tool directly via Metav Werkzeuge or consult the technical team for integration advice. Face‑milling head T364TM — compact milling head, Ø63 mm, for SDMT 09T3 The Face‑milling head T364TM is a compact milling tool holder designed for economical face milling with SDMT 09T3 indexable inserts in general machining and small‑batch production. 63 mm cutting diameter For SDMT 09T3 indexable inserts Shank Ø 22 mm, overall length 40 mm Torx M3.5×8.5 screw, T15 key required Stable clamping for consistent surface results The milling head delivers a dependable contact interface thanks to its shank Ø22 mm and secure fastening system. This configuration reduces micro‑movement at the toolholder, which translates into a more consistent surface finish and predictable tool life. The head's modest 0.592 kg mass strikes a balance between rigidity and manageable spindle load, enabling productive cutting without over‑stressing smaller milling machines. Fast indexable‑insert changes and secure screw fixation Designed for use with SDMT 09T3 inserts, the tool permits quick insert replacement to keep downtimes low. The insert is fastened by a Torx M3.5×8.5 screw that requires a T15 key; this standardised interface simplifies workshop logistics and reduces the risk of incorrect tools being used during service. Clear torque practice when tightening the Torx screw ensures reliable clamping and repeatable performance. Compact footprint for versatile workshop setups With a 63 mm cutter diameter and an overall length of 40 mm, the head is suited to confined setups where access and tool‑reach are limiting factors. The compact design supports tight fixturing and enables high‑precision finishing passes on small parts, where larger heads would be impractical. The combination of a small tool body and the ability to accept industry‑standard inserts makes the head a flexible choice for mixed production environments. Compatibility and integration with existing tooling The cutter is compatible with inserts from established manufacturers such as ZCC, which facilitates straightforward sourcing of replacements. The standard 22 mm holder diameter matches common arbors and adapters, reducing the need for custom interfaces. If additional technical data is required for machine integration or process planning, Metav Werkzeuge can provide specification sheets and mounting guidance to help verify fit and balance. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the T364TM face‑milling head directly from stock in Emmerich Technical data SKU: T364TM Product name: Face‑milling head Brand: Teknik Makina Core technical data Cutting diameter: 63 mm Shank / bore: 22 mm Overall length: 40 mm Weight: 0.592 kg Number of cutting edges: 6 Special features Compatible with SDMT 09T3 indexable inserts Recommended insert manufacturer: ZCC Fastening: Torx screw M3.5×8.5 Torx key size: T15 FAQ What inserts fit this milling head? The face‑milling head accepts SDMT 09T3 indexable inserts; compatibility with ZCC‑manufactured inserts is specified for straightforward sourcing. Which tool secures the insert and what size is the screw? Inserts are fixed with a Torx M3.5×8.5 screw; a T15 Torx key is required for both installation and removal on the T364TM. Is the head suitable for smaller machines? Yes. The compact overall length of 40 mm and moderate mass (about 0.592 kg) make the head appropriate for smaller milling spindles where excessive overhang would be a concern. How many cutting edges are provided by the assembly? The assembly is configured with 6 effective cutting edges when fully equipped with SDMT 09T3 inserts, offering a balance of material removal and surface control. What arbor or holder diameter is required for mounting? The tool is designed for a 22 mm shank interface, matching common arbors and adapters for simple integration into existing tooling systems. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, high-stability cutter head that accepts SDMT 1204 indexable inserts and secures them with an M4x10 Torx screw (T15) for reliable clamping; order this item directly via Metav Werkzeuge or consult the team for integration advice. Planmesserkopf — face milling head for SDMT 1204 indexable inserts, 63 mm diameter Planmesserkopf designed as a compact face milling head, ideal for light to medium machining tasks using SDMT 1204 indexable inserts and a 22 mm shank for space-saving installation 63 mm diameter for stable cutting Compatible with SDMT 1204 indexable inserts 22 mm shank for compact mounting Secure clamping with M4x10 Torx screw (T15) Precision and steady cuts in compact form The cutter head is engineered to deliver consistent results through its 63 mm diameter and five cutting edges, which together increase contact stability and reduce vibration during operation. This design translates into improved surface finish and longer insert life compared with smaller-diameter alternatives. The overall compactness is retained with a 40 mm length, allowing installation in tighter toolholders without sacrificing cutting performance. For users unfamiliar with indexable tooling: indexable inserts are replaceable cutting tips that are clamped into a holder, so only the insert needs replacement when worn rather than the whole tool, saving time and cost. Fast insert changes and secure fastening for reliable production Compatibility with SDMT 1204 indexable inserts — including those from ZCC — ensures access to a wide range of cutting grades and geometries for different materials. The inserts are retained by an M4x10 Torx screw, tightened with a T15 key, providing a predictable clamping force and simple servicing on the shop floor. The fast, tool-based retention reduces downtime for insert changes and avoids complex adjustment procedures. Where vibration or runout is a concern, the compact 22 mm shank and balanced geometry minimise adverse effects, supporting reproducible machining results even at moderate spindle speeds. Practical workshop integration and handling benefits Weighing 0.422 kg, the head combines low inertia with sufficient mass for stable cutting dynamics, which helps when working on finishing passes or shallow roughing. The 22 mm attachment diameter is commonly used in modular tool systems and is straightforward to mount in compatible toolholders. For workshops seeking a reliable compromise between tool footprint and cutting stability, this cutter head fits into existing setups with minimal adaptation. If material-specific guidance is required, technical advisors can recommend suitable insert grades and cutting parameters to match the application. For technical advice or to secure supply of the Teknik Makina face milling head (SKU T359TM), contact Metav Werkzeuge in Emmerich for tailored recommendations and fast delivery. Technical data SKU: T359TM Brand: Teknik Makina Article: face milling head for SDMT 1204 indexable inserts ECLASS: 21181015 Facts Diameter: 63 mm Number of cutting edges: 5 Shank diameter (attachment): 22 mm Overall length: 40 mm Weight: 0.422 kg Special features Compatible insert type: SDMT 1204 Compatible insert manufacturer: ZCC Torx screw: M4x10 Torx key: T15 FAQ Which inserts fit this cutter head? The cutter head accepts SDMT 1204 indexable inserts; inserts from ZCC are confirmed compatible with this Teknik Makina face milling head (SKU T359TM). How is the insert secured in the tool? Inserts are clamped with an M4x10 Torx screw, tightened using a T15 key; this provides a secure and serviceable retention method for the Planmesserkopf. What shank size is required for mounting? The tool has a 22 mm attachment diameter, so a compatible 22 mm toolholder is required for correct mounting and alignment. Is the head suitable for finishing operations? Yes — the combination of 63 mm diameter, five cutting edges and a balanced compact design supports stable finishing passes when paired with the appropriate insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise mounting and efficient material removal thanks to a 22 mm shank, Ø 63 mm cutter diameter and four cutting edges; reliable assembly with an M8x24 fastening screw and 5 mm Allen key keeps set-up fast and vibration low. Order the component directly via Metav Werkzeuge or ask our consultants for compatibility details. Planing cutter head – cutter head for SPKN 1203 indexable inserts, Ø 63 mm (Teknik Makina) A Planing cutter head designed for SPKN 1203 indexable inserts, built for stable mounting and consistent surface quality in planing and face-milling operations For SPKN 1203 indexable inserts Ø 63 mm nominal diameter 4 cutting edges for efficient stock removal 22 mm shank diameter for secure mounting Stable mounting for consistent surface quality A robust mounting system centred on the 22 mm shank and the M8x24 fastening screw delivers reduced runout and reliable repeatability. The fixed 75° cutting angle helps maintain a predictable chip flow, resulting in a smoother surface finish and less rework. Stable clamping means lower vibration during heavy cuts, which extends tool life and enables consistent part tolerances without frequent realignment. Faster cycle times through four cutting edges and compact design Featuring 4 cutting edges and a compact overall length of 45 mm, the head is optimised for short tool overhangs and effective material removal. The design accepts SPKN 1203 indexable inserts, enabling quick edge changes and uniform cutting geometry across all positions. With a Ø 63 mm diameter the head balances rigidity and accessibility at the cutter periphery, allowing improved metal removal rates while keeping thermal and mechanical loads manageable. Quick retooling and predictable maintenance intervals The assembly uses an M8x24 hex screw and a 5 mm Allen key for secure, uncomplicated insert changes and maintenance. The component’s modest weight (0.6 kg) and standard shank diameter simplify handling and machine interfacing, reducing set-up time at tool changes. Documented, repeatable procedures supported by familiar fastenings lead to lower downtime and easier planning of preventive maintenance, promoting continuous production flows and dependable output. Contact Metav Werkzeuge for procurement and technical advice on Teknik Cutting Tools items; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T150TM Manufacturer: Teknik Makina Item: Planing cutter head For inserts: SPKN 1203 Indexable Inserts Diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Cutting edges: 4 Cutting angle: 75° Fastening screw: M8x24 Allen key: 5 mm Weight: 0.6 kg Facts Diameter: 63 mm Shank diameter: 22 mm Overall length: 45 mm Weight: 0.6 kg Cutting edges: 4 Cutting angle: 75° Special features For SPKN 1203 indexable inserts Fastening screw M8x24 5 mm Allen key required Compact design with Ø 63 mm FAQ What inserts are compatible with this cutter head? The cutter head accepts SPKN 1203 indexable inserts; this configuration ensures consistent geometry across the four cutting positions for predictable machining behaviour. What is the shank diameter and mounting requirement? The unit is supplied with a 22 mm shank diameter and is secured with an M8x24 hex screw; a 5 mm Allen key is used for assembly and insert changes. How many cutting edges does the head provide and what is the benefit? The head carries 4 cutting edges, which allows for efficient stock removal and balanced cutting forces, improving cycle times and finish quality. Is this head suitable for heavy roughing cuts? The compact design and secure 22 mm shank give good rigidity for interrupted and continuous cuts within the machine’s capability; final suitability depends on the machine and cutting parameters used. What measuring or maintenance advantages does this design offer? With standard fastening and a modest weight of 0.6 kg, the head enables quick retooling, repeatable set-up and straightforward preventive maintenance scheduling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-compatible face milling head that combines reliable mounting, a Ø63 mm cutter body and efficient chip control for steady surface quality; order directly via Metav Werkzeuge or ask the technical consultants for application advice. Planmesserkopf face milling head — Ø63 mm, for WNMX 09T3 indexable inserts (Teknik Makina) The Planmesserkopf is a precision face milling head designed for use with WNMX 09T3 indexable inserts, offering a compact, robust solution for face milling tasks in small to medium batch production. Ø63 mm face milling head For WNMX 09T3 indexable inserts 6 cutting edges for stable machining 22 mm shank diameter, robust mounting Consistent compatibility that reduces setup time The compact face milling head is built specifically for WNMX 09T3 indexable inserts and is confirmed compatible with Korloy plates, which simplifies procurement and tool-change logistics. Matching the insert family means fewer adapter parts and faster changeovers; shops benefit from predictable tool life and reduced downtime when standardising on a single insert geometry. The clear designation of the insert type supports inventory planning and speeds up ordering procedures. Secure clamping for repeatable results Clamping is achieved with an M3x7 Torx screw tightened using a T8 Torx key, which ensures reliable seating of the insert and consistent cutting geometry after each change. The tool’s 22 mm interface provides a stable connection to commonly used holders, reducing micro-movement under cutting loads. Reliable clamping reduces rework and contributes to repeatable component tolerances in serial production. Designed for stable cutting and good surface finish With 6 cutting edges distributed around the cutter, the head promotes even load distribution and steady chip formation, which helps to maintain surface finish and extend insert life. The overall 40 mm length and a weight of 0.542 kg contribute to a well-balanced rotational behaviour that supports vibration damping and consistent cutting engagement. These characteristics are particularly valuable when aiming for uniform finishes across multiple workpieces. Practical choice for workshop standardisation As a compact, insert-based solution, the milling head supports efficient tooling strategies in workshops and small production environments. The straightforward compatibility with WNMX 09T3 inserts reduces the variety of spare parts needed while maintaining machining flexibility. The product’s classification (ECLASS 21180902) aids integration into procurement systems and technical documentation for quality management. Contact Metav Werkzeuge for tailored application advice or to request availability of Teknik Makina face milling heads compatible with WNMX 09T3 inserts — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: T671TM Manufacturer: Teknik Makina ECLASS: 21180902 Product designation: Planmesserkopf for WNMX 09T3 Indexable Inserts Dimensions & core data Diameter: 63 mm Overall length: 40 mm Shank / interface diameter: 22 mm Weight: 0.542 kg Cutting edges: 6 Features & compatibility Compatible inserts: WNMX 09T3 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key size: T8 FAQ Is this milling head compatible with Korloy WNMX 09T3 inserts? Yes. The face milling head (SKU T671TM) is specified for WNMX 09T3 indexable inserts and has confirmed compatibility with Korloy plates. Which screw and key are required to clamp the insert? Insert clamping uses an M3x7 Torx screw; a T8 Torx key is required to tighten or loosen the screw. What are the key dimensions of the cutter head? The cutter has a Ø63 mm body, a 22 mm shank/interface, an overall length of 40 mm and weighs 0.542 kg. How does the number of cutting edges affect machining? The 6 cutting edges distribute cutting forces more evenly, reducing vibration and helping to achieve a steadier surface finish with less frequent insert change-out. Which toolholders will accept this head? The head is designed for a 22 mm interface; it is suitable for holders that accept a 22 mm mounting diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance facing solution with Ø63 mm diameter and five cutting edges for smooth finishes; mount it on a 22 mm toolholder and rely on secure Torx fastening for quick insert changes — order via Metav Werkzeuge or consult our specialists for application advice. Planing cutter head — compact facing head Ø63 mm, 5 cutting edges (Teknik Cutting Tools) The Planing cutter head is a compact facing tool designed for ZDEW 1204 indexable inserts, ideal for precise finishing and small-batch milling where space and repeatability matter. Compact Ø63 mm diameter Five cutting edges for fine finishing 22 mm toolholder bore for secure mounting Torx M4.5x11 fastening, T15 key required Reliable precision for compact facing operations This facing head delivers consistent surface quality thanks to its Ø63 mm diameter and the arrangement of five cutting edges, which reduces vibration and distributes cutting forces evenly. The relatively low mass (approx. 0.474 kg) and an overall length of 40 mm contribute to stable running on smaller milling spindles and compact toolposts. Such stability translates into improved dimensional consistency on successive passes and a better surface finish, especially useful in jobs where repeating identical faces is required. The design supports high repeatability without added complexity, making it suitable for both maintenance workshops and production cells that prioritise process reliability. Fast, secure insert changes reduce downtime Engineered for ZDEW 1204 indexable inserts (compatible with Pramet), the head uses a Torx M4.5x11 clamping screw and a T15 key for secure, repeatable seating of each insert. The 22 mm toolholder bore (22 mm) ensures a tight fit to standard mini-arbors and quick-change adaptors, so changeover procedures are straightforward and time-efficient. Clear mechanical interfaces mean that insert replacement and re-clamping are performed with minimal adjustment, lowering machine downtime and simplifying operator routines. The compatibility with well-known insert systems makes stocking and procurement simpler for purchasing teams. Built for workshop versatility and efficient workflows With its focused specification set — compact diameter, modest overall length and standardised mounting — this head integrates easily into small-tool inventories and supports flexible machining strategies. The combination of secure Torx fastening and standardised 22 mm mounting creates a robust coupling between cutter and arbor, which helps reduce micro-movement during interrupted cuts. Where space is limited, or where a small facing diameter is required, this unit offers an economical route to high-quality face milling without bespoke tooling. The construction emphasises predictable behaviour and easy maintenance, aligning with the practical needs of craft workshops and light industrial users. For secure, compact facing with proven compatibility, choose the Teknik Cutting Tools Planing cutter head and contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T197TM Manufacturer: Teknik Makina Name: Planing cutter head For: ZDEW 1204 indexable inserts Suitable insert manufacturer: Pramet Core specifications Diameter: 63 mm Cutting edges: 5 Overall length: 40 mm Toolholder bore: 22 mm Weight: 0.474 kg Torx screw: M4.5x11 Features Torx key: T15 Compatible with ZDEW 1204 inserts Secure clamping via M4.5x11 screw Compact design for small setups FAQ What inserts does this cutter head accept? The cutter head accepts ZDEW 1204 indexable inserts and is specified for inserts from Pramet. Which toolholder size is required for mounting? Mounting requires a 22 mm toolholder bore; the head is designed for a 22 mm arbor fit. What fastening method secures the inserts? Inserts are secured with a Torx M4.5x11 clamping screw; a T15 key is required for tightening and loosening. Is the head suitable for high-feed facing operations? The head is optimised for compact facing and finishing; its five-edge arrangement supports stable cutting in light to moderate feed applications. How compact is the unit for constrained setups? With an overall length of 40 mm and a diameter of 63 mm, the head is intended for limited-space applications and small-batch machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact form, internal coolant and compatibility with standard RPMT 10T3 inserts for reliable finishing performance; order directly via Metav Werkzeuge or consult our specialists for configuration advice. Face milling cutter T708-1TM — 63 mm diameter, internal coolant (Teknik Makina) The Face milling cutter T708-1TM is a compact indexable cutter engineered for precise finishing and efficient chip evacuation in small to medium milling setups. 63 mm diameter for compact operations Internal coolant for improved chip evacuation Six cutting edges for efficient material removal Compatible with RPMT 10T3 Korloy inserts Higher throughput from a compact design The 63 mm diameter milling head delivers a high material removal rate while retaining a compact footprint, ideal where space and accessibility matter. The combination of a six-edge cutting geometry and a short overall length of 40 mm reduces tool runout and vibration, which translates into steadier feeds and better surface finish. By using RPMT 10T3 indexable inserts, the system provides multiple cutting corners per insert, which shortens downtime for index changes and lowers cost per cutting edge compared with welded or single-piece cutters. The result is measurable productivity improvement in repetitive finishing tasks. Improved cooling and secure insert clamping for consistent performance Integrated internal coolant channels direct cutting fluid close to the cutting edge, supporting heat control and chip flushing at the point of contact. This feature helps maintain a stable cutting temperature and can extend insert life under continuous operation. The insert fastening uses Torx T15 drive with M3.5x8.5 screws, offering secure, repeatable clamping torque and minimised cam‑out during tightening. Together, these design choices reduce the risk of premature edge wear and contribute to more predictable machining cycles — a distinct advantage for production environments requiring repeatability. Compatibility and workshop practicality The cutter accepts RPMT 10T3 inserts from Korloy, enabling straightforward stocking of common inserts and simple retrofit into existing tool setups. With a net weight of 0.584 kg, the toolhead balances rigidity and handling convenience, making it suitable for manual tool changes as well as automated toolholders. The lightweight design lowers spindle load during acceleration and deceleration, while the robust construction supports consistent cutting forces. For shops consolidating tooling, this milling head offers a compact, efficient option that integrates with standard insert inventories. For tailored advice on configuring the Teknik Makina T708-1TM for specific materials or cycle times, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal setup for a reliable production workflow Technical data SKU: T708-1TM Manufacturer: Teknik Makina Product type: Face milling cutter Label: 63mm Rundplattenfräser RPMT 10T3 L40mm mit Innenkühlung Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.584 kg Cutting edges: 6 Torx key: T15 Torx screw: M3.5x8.5 Special features Internal coolant For RPMT 10T3 indexable inserts Compatible insert supplier: Korloy FAQ What insert type does this cutter use? The T708-1TM face milling cutter uses RPMT 10T3 indexable inserts, compatible with Korloy RPMT 10T3 grades. Is the cutter suitable for heavy roughing operations? The cutter is designed primarily for finishing and medium-duty milling; its compact 63 mm diameter and six-edge configuration favour precision and surface quality over aggressive roughing. How does internal coolant benefit machining with this cutter? Internal coolant supplies fluid directly to the cutting zone, improving chip evacuation, reducing cutting temperatures, and helping to extend the life of RPMT 10T3 inserts. Which screwdriver is required for insert changes? Insert fastening and removal use a Torx T15 drive with M3.5x8.5 screws for secure and repeatable clamping. Can the milling head be used in automated tool changers? With its standard dimensions and balanced weight, the T708-1TM is suitable for integration into automated toolholders and conventional milling spindles when the toolholder matches the cutter interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust machining stability from the 63 mm diameter with integrated internal coolant and compatibility with RCKT 1204 indexable inserts for reliable face milling and reduced downtime. Order the round insert milling cutter directly via Metav Werkzeuge or contact the consultants for application advice. T462-1TM Round insert milling cutter – 63 mm, internal coolant (Teknik Makina) T462-1TM round insert milling cutter designed for precise face-milling with RCKT 1204 indexable inserts, offering stability and coolant-fed performance for general machining tasks. 63 mm diameter for stable face milling For RCKT 1204 indexable inserts (Sandvik) Internal coolant for improved tool life Five cutting edges, 45° cutting angle High-capacity face milling that boosts process reliability The T462-1TM is engineered to deliver consistent material removal while maintaining run-out resistance and cutting stability. With a 63 mm diameter and a 45° cutting angle, the head balances axial and radial cutting forces to reduce chatter and improve surface finish. The presence of five cutting edges spreads cutting loads across multiple inserts, which can extend the effective lifetime between indexings and supports steady cycle times on batch and single-piece production alike. This combination translates into measurable productivity gains and predictable tool-change intervals. Integrated coolant and insert compatibility to cut downtime Built-in internal coolant channels feed cooling directly to the cutting zone, which helps evacuate chips and control cutting temperatures during demanding passes. Compatibility with RCKT 1204 indexable inserts — and acceptance of inserts from Sandvik — enables simple selection of grades and geometries to suit different materials and surface requirements. The coolant-fed design and standardised insert format reduce setup complexity, allowing maintenance routines to be completed quickly and diminishing machine idle time in productive workshops. Practical design for easy handling and workshop integration The milling head’s modest 40 mm overall length and weight of 0.436 kg make it straightforward to mount in a variety of cutter holders without significant overhang. Fastening uses a Torx T15 key and M3.5x8.5 screws for secure, repeatable clamping of the inserts; these common fasteners simplify the maintenance toolkit and spare-part logistics. The cutter’s compact footprint and standard interface support straightforward integration into existing tool inventories, helping to reduce tooling complexity on the shop floor. Reliability, support and application guidance This milling head is intended for workshops and production environments seeking a resilient solution for face milling with indexable inserts. Emphasis on proven mechanical stability and coolant-assisted cutting supports longer insert life and predictable surface quality. If uncertainty remains about grade selection or specific machining parameters, Metav Werkzeuge’s technical consultants can provide tailored application guidance and recommend insert grades for particular tasks. For coolant-fed face milling with proven insert compatibility, request the T462-1TM via Metav Werkzeuge for expert application support and efficient supply from Emmerich. Technical Data SKU: T462-1TM Label: 63mm Rundplattenfräser RCKT 1204 L40mm mit Innenkühlung Product: Round insert milling cutter Compatible inserts: RCKT 1204 Manufacturer: Teknik Makina eCl@ss: 21180902 Facts Diameter: 63 mm Overall length: 40 mm Weight: 0.436 kg Cutting edges: 5 Cutting angle: 45° Torx screw: M3.5x8.5 Special features Internal coolant: yes Compatible insert manufacturer: Sandvik Torx key: T15 For RCKT 1204 indexable inserts Product type: Round insert milling cutter FAQ Which insert type does the cutter accept? The cutter is designed for RCKT 1204 indexable inserts; insert grade and geometry should be selected according to the application and material. Does the tool support coolant-fed machining? Yes, the head features internal coolant to assist chip evacuation and temperature control at the cutting edge. What are the main dimensions and weight? The head has a 63 mm diameter, 40 mm overall length and a weight of 0.436 kg, facilitating compact mounting and low overhang. Which fasteners and tools are required for insert changes? Insert clamping uses M3.5x8.5 Torx screws and a T15 Torx key for secure, repeatable insert replacement. Is the cutter compatible with inserts from well-known brands? Compatibility with Sandvik inserts is indicated; proven insert suppliers allow selection of grades for different machining tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Get consistent high-throughput milling and predictable tool life with a 63 mm, six-edge round insert cutter featuring a 22 mm mounting bore; order directly via Metav Werkzeuge or consult our workshop specialists for integration advice. Round insert milling cutter — 63 mm, 6-edge for RPMW 10T3 (Teknik Makina) A Round insert milling cutter designed for efficient face milling operations with RPMW 10T3 indexable inserts 63 mm diameter precision cutting Six cutting edges for extended tool life 22 mm mounting bore for secure clamping Compatible with RPMW 10T3 Korloy inserts High material removal with controlled accuracy This milling head combines a compact 63 mm diameter with 6 cutting edges to deliver a balance of material removal rate and surface control. The multi-edge arrangement reduces the load per insert, which leads to a more even wear pattern and longer intervals between indexings. As a result, cycle times can be shortened without sacrificing repeatability. The design is optimised for the use of RPMW 10T3 type indexable inserts, offering straightforward insert replacement and consistent cutting geometry for applications where predictable part tolerance and surface state matter. Secure clamping and straightforward maintenance A precise 22 mm mounting bore provides a rigid interface with toolholders and reduces the risk of vibration under load, supporting stable cutting conditions. Fastening is achieved with M3.5x8.5 screws tightened with a Torx T15 key, enabling reliable clamp force and fast, repeatable changeovers during servicing. The screw-and-insert arrangement keeps maintenance time to a minimum and allows shops to replace only the worn components rather than the complete head, aiding uptime and reducing waste in the tooling lifecycle. Practical applications and efficient tooling strategy The cutter is intended for indexable insert milling workflows where quick insert changes and tool stability are priorities. Compatibility with Korloy RPMW 10T3 inserts gives access to a wide range of grades and geometries for various cutting conditions. Selecting an insert grade matched to the job material will allow the tool to deliver consistent performance and cost-efficiency while supporting a modular tooling strategy that simplifies inventory. The head’s construction supports repeatable set-ups and can be integrated into existing milling programmes with minimal adjustment. For tailored advice on integrating Teknik Makina tooling into production, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data Article number: T708TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Compatible inserts: RPMW 10T3 Facts Diameter: 63 mm Overall height: 40 mm Cutting edges: 6 Mounting bore: 22 mm Torx key size: T15 Special features Insert type: KRLY Compatible insert manufacturer: Korloy Fastening screw: M3.5x8.5 Application: indexable insert milling FAQ Which insert type does the cutter accept? The cutter accepts RPMW 10T3 indexable inserts; it is specified for KRLY-style plates and is compatible with Korloy inserts. How many cutting edges are available and what is the benefit? The head has six cutting edges, which spreads cutting forces across more edges and helps to extend the life of each insert while maintaining consistent surface quality. What is the mounting interface of the tool? A 22 mm mounting bore provides a secure connection to the toolholder, supporting rigid clamping and stable cutting conditions. Which fastening hardware is required for insert replacement? Inserts are secured with M3.5x8.5 screws tightened with a Torx T15 key for repeatable and reliable assembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com