Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact milling head that combines 63 mm diameter, internal coolant and six cutting edges for steady material removal; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Round indexable insert face mill – 63 mm, internal coolant (Teknik Cutting Tools) The Round indexable insert face mill for RDMT 12T3 indexable inserts is engineered for efficient face milling in constrained setups, offering reliable chip control and consistent surface quality. 63 mm diameter for compact machining Internal coolant for improved chip evacuation Six cutting edges for steady material removal Compatible with RDMT 12T3 indexable inserts Increase throughput in compact setups with a balanced cutter head The compact face mill delivers a combination of rigidity and accessibility that is particularly valuable where space is limited. With a 63 mm diameter and a total length of 40 mm, the head is designed to be integrated into short overhang applications while maintaining cutting stability. The reduced projection lowers vibration, which in turn allows for higher feed per tooth and an increase in productive cutting time. This results in improved cycle reliability and a measurable uplift in machining efficiency for small- to medium-batch production runs. Controlled temperatures and chips thanks to internal coolant The inclusion of internal coolant is a decisive technical advantage for sustained cutting performance. Coolant is guided directly to the cutting zone, which reduces cutting-edge temperature and promotes more uniform wear on the insert flanks. This targeted cooling improves tool life and helps to maintain a consistent surface finish over longer tool cycles. In practice, chips are evacuated more effectively, reducing the risk of recutting and machine downtime; maintenance intervals can therefore be extended without compromising component quality. Precise clamping and service-friendly design for dependable operation A total of six cutting edges are provided via RDMT 12T3 compatible indexable inserts, giving a good balance between metal removal rate and insert economy. The head is secured with Torx T15 fastenings and M3.5x8.5 screws, enabling fast, repeatable insert changes with low risk of misalignment. The tool mass of approximately 0.512 kg and its compact geometry make handling and spindle mounting straightforward. For purchasers and operators, the clear mechanical specification and standardised fixing mean predictable process parameters and straightforward stocking of spare parts. Contact Metav Werkzeuge today for a tailored recommendation and to secure the T285-1TM face mill for immediate integration into production. Technical Data Article number: T285-1TM Product type: Round indexable insert face mill Manufacturer: Teknik Cutting Tools eClass: 21180902 Facts Diameter: 63 mm Total length: 40 mm Weight: 0.512 kg Number of cutting edges: 6 Internal coolant: yes Special features Compatible with RDMT 12T3 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 SKU: T285-1TM FAQ What inserts does this cutter accept? The cutter accepts RDMT 12T3 indexable inserts; the cutter head is engineered specifically for that insert form to ensure correct seating and chip flow. Is coolant-through supported on this tool? Yes, the head features internal coolant, which is routed to the cutting zone to aid chip evacuation and reduce edge temperature during machining. What are the key dimensions for setup and tool selection? Key dimensions are 63 mm diameter and 40 mm total length; the tool mass is approximately 0.512 kg, which helps when determining spindle load and holder selection. How many cutting edges are available per cutter head? The head is equipped with six cutting edges via RDMT 12T3 indexable inserts, providing a balance between productivity and insert economy. Which fastenings are used for the inserts? Inserts are secured with Torx screws (M3.5x8.5) using a T15 Torx key to ensure repeatable clamp force and simple replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable face mill that combines precise insert compatibility and robust clamping for reliable machining results; benefit from the Ø 63 mm cutting head with five cutting edges and secure 22 mm shank for stable performance — order directly via Metav Werkzeuge or consult our specialists for specification advice. Round face mill T273TM by Teknik Makina — for RDMT 1604 indexable inserts, Ø 63 mm Round face mill T273TM designed for efficient face milling with RDMT 1604 indexable inserts, ideal where modular insert systems are preferred for quick tool changes and consistent cutting performance For RDMT 1604 indexable inserts 63 mm diameter cutting head Five cutting edges for efficient removal 22 mm shank for secure clamping Efficient machining with indexable inserts for predictable output This cutter is built around the proven principle of indexable tooling: replaceable cutting edges reduce downtime while maintaining consistent cutting geometry. The use of indexable inserts means insert changes are fast and repeatable, keeping cycle times low and machine uptime high. The Ø 63 mm cutting head with five cutting edges provides a balanced trade-off between metal removal rate and surface finish, allowing focused productivity gains in operations that rely on reliable, repeatable cuts. Secure clamping and service-friendly fastenings for stable runs Clamping and fastenings have been specified to favour workshop efficiency. The tool features a 22 mm shank for firm mounting in compatible holders, a M4x10 locking screw, and M4,5x11 Torx screws retained by a BSP010 clamp plate; assembly and insert changes are performed using a Torx T20 key. These standardised fastenings simplify inventory of spare parts and make maintenance straightforward, while the compact overall length 45 mm and modest 0.512 kg mass reduce overhang and help maintain rigidity during cutting. Compact design that supports streamlined workshop logistics A compact milling head with standardised attachment features contributes to a more efficient tooling setup: fewer specialised holders, lower stock variety, and faster changeovers. The modular nature of indexable systems supports lean stocking strategies and predictable tool life management. When integrated into a well-structured tool cabinet, this milling head helps reduce the administrative and operational friction commonly encountered with solid-tool replacements, delivering pragmatic benefits for procurement and production planning. Contact Metav Werkzeuge today for a tailored recommendation on integrating the Teknik Makina round face mill T273TM into the production line, or request personalised technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: T273TM Manufacturer: Teknik Makina Product: Round face mill for RDMT 1604 indexable inserts Facts Diameter: 63 mm Cutting edges: 5 Overall length: 45 mm Shank diameter: 22 mm Weight: 0.512 kg Special features For RDMT 1604 indexable inserts Locking screw: M4x10 Torx screw: M4,5x11 U plate: BSP010 Torx key: T20 FAQ Which inserts are compatible with the round face mill T273TM? The Teknik Makina round face mill T273TM is designed for RDMT 1604 indexable inserts and accepts inserts matching that designation. How is the cutter secured to the tool holder? The T273TM uses a 22 mm shank with a M4x10 locking screw, M4,5x11 Torx screws and a BSP010 clamp plate; Torx T20 is the recommended key for service. What are the key dimensions and mass of this cutter? The Teknik Makina T273TM has a 63 mm diameter, overall length 45 mm, 22 mm shank diameter and a mass of 0.512 kg. Are insert changes and maintenance straightforward? Yes — the modular insert system and standard Torx fastenings on the T273TM make insert replacement quick and maintenance procedures routine, reducing machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine consistent material removal with straightforward insert replacement: the T601TM delivers a 63 mm cutting diameter and six cutting edges for steady productivity, while compatibility with standard RHKW 0802 inserts keeps tooling flexible. Order the round indexable cutter directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Round indexable cutter (T601TM) – Ø 63 mm, for RHKW 0802 indexable inserts by Teknik Makina The Round indexable cutter (T601TM) is designed for medium-duty milling tasks where rapid chip removal and fast insert changes are required, making it suitable for workshops and production environments that use indexable tooling Ø 63 mm cutting diameter 6 cutting edges Shank Ø22 mm For RHKW 0802 indexable inserts Torx T15 fastening M3x7 High material removal with consistent stability This cutter combines a Ø 63 mm diameter with six cutting edges to provide a stable cutting pattern and even load distribution across the tool body. The arrangement of multiple cutting edges reduces vibration and spreads cutting forces, which typically leads to improved surface finish and longer life of the indexable inserts. The result is a predictable machining process with fewer interruptions for insert changes, supporting higher machine throughput and lower per-part machining times. Secure mounting and proven compatibility Equipped with a Shank Ø22 mm and a compact overall length, the tool integrates easily into standard milling holders and arbor setups. It is expressly designed for RHKW 0802 indexable inserts and is compatible with inserts from Ingersoll, ensuring access to widely available replacement parts. A clearly defined shank diameter and standardised insert format make toolholder matching straightforward, supporting consistent concentricity and runout control in CNC operations. Fast, safe insert clamping and simple maintenance The cutter uses an M3.5 clamping screw together with an M3x7 Torx screw for each insert seat; replacement is performed with a T15 Torx key. This proven fastening arrangement allows quick insert indexing without specialised tools, minimising machine downtime. The simple screw system also supports repeatable clamping forces, which helps maintain cutting geometry and reduces the risk of unexpected insert movement during interrupted cuts. Practical workshop advantages and supply reliability By using a standard indexable format, this cutter reduces the variety of spare parts required in a busy workshop and simplifies inventory planning. The relatively low mass and compact design support agile tool changing and safe handling at the bench. Metav Werkzeuge’s philosophy of the democratisation of precision ensures that such precision tooling is available with dependable delivery from the Emmerich stocking point, backed by decades of distribution experience and an established European quality filter. Contact Metav Werkzeuge for tailored tooling recommendations and secure the Teknik Cutting Tools T601TM with matched RHKW 0802 inserts through direct supply and expert consultation Technical data Article number: T601TM Brand: Teknik Makina ECLASS: 21180902 ETIM: EC011860 Facts Cutting diameter: 63 mm Number of cutting edges: 6 Overall length: 40 mm Shank diameter (Ø): 22 mm Weight: 0.53 kg Special features For RHKW 0802 indexable inserts Compatible with Ingersoll inserts Clamping screw: M3.5 Torx screw: M3x7 Torx key size: T15 SKU: T601TM FAQ Which insert type fits the cutter? The cutter accepts RHKW 0802 indexable inserts; the T601TM is optimised for this insert form and works with Ingersoll-manufactured inserts of the same designation. What is the cutting diameter and how many edges are active? The tool has a 63 mm cutting diameter and six active cutting edges, arranged to deliver even material removal and stable cutting forces. Which shank and mounting details should be noted? The tool features a Shank Ø22 mm and a compact overall length of 40 mm; clamping is achieved via an M3.5 clamping screw and an M3x7 Torx screw using a T15 key. How does the fastening system impact maintenance? The M3.5/M3x7 screw combination with a T15 key enables quick insert changes and reproducible clamping, reducing downtime and simplifying routine maintenance. For which operations is this cutter intended? This round indexable cutter is intended for milling operations that benefit from indexable insert systems such as profiling and face milling where quick insert indexing and replaceability are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 63 mm cutting diameter, six indexable cutting edges and a 22 mm arbor bore for stable, repeatable face milling — order the Round Insert Face Mill T606TM directly via Metav Werkzeuge or ask our consultants if needed Round Insert Face Mill T606TM — 63 mm diameter, for RHKW 1003 indexable inserts (Teknik Makina) A robust Round Insert Face Mill T606TM engineered for medium-duty face milling applications using RHKW 1003 indexable inserts, offering reliable cutting geometry and straightforward servicing 63 mm cutting diameter Six indexable cutting edges 22 mm arbor bore Compatible with RHKW 1003 inserts High material removal rates with predictable results The T606TM face mill is designed to deliver consistent chip removal across a range of medium-duty face milling tasks. With a 63 mm diameter and six cutting edges, the tool balances feed per tooth and spindle load to enable efficient metalworking cycles. The cutter geometry reduces vibration and helps to maintain surface finish, while the 22 mm arbor bore ensures secure mounting in common toolholders. For production environments the combination of cutter diameter and multiple cutting edges translates into shorter cycle times and more predictable machining results. Secure clamping and rapid indexable-insert changes Maintenance intervals are kept short thanks to clearly specified clamping components: a M3.5 clamping screw, a M4x10 Torx screw and a T15 Torx key for fast, reliable insert changes. The straightforward retention design minimises downtime during tool changes and facilitates repeatable seating of the inserts, preserving cutting geometry. Fewer interruptions for servicing means higher productive uptime and lower labour cost per component when compared with more complex fastening systems. Broad compatibility for streamlined tooling logistics This cutter is specified for RHKW 1003 indexable inserts and is listed as compatible with Ingersoll insert systems, making it suitable for workshops that standardise on those inserts. The compatibility reduces the need for multiple insert types, simplifying inventory and purchasing. At a modest mass of 0.488 kg, the tool is light enough for easy handling yet substantial enough to deliver stable machining performance when mounted on a correctly rated arbor and spindle. Practical benefits for workshop integration The T606TM integrates into established production workflows with minimal setup complexity: the 22 mm bore fits common adaptors, the insert type is widely stocked, and the tool’s geometry is optimised for repeatable results. These attributes combine to lower the entry barrier for precise face milling, making it an economical choice for small batches and serial production alike. Where productivity and predictable surface quality matter, this cutter provides a pragmatic balance of performance and ease of use. Contact Metav Werkzeuge for tailored technical advice and to arrange a supply quotation for the Teknik Cutting Tools Round Insert Face Mill T606TM — reach our Emmerich centre by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: T606TM Manufacturer: Teknik Makina Product name: Round Insert Face Mill T606TM For inserts: RHKW 1003 Indexable Inserts Compatible with inserts from: Ingersoll Facts Diameter: 63 mm Cutting edges: 6 Arbor bore: 22 mm Overall length: 40 mm Weight: 0.488 kg Clamping screw: M3.5 Torx screw: M4x10 Special features Torx key size: T15 Designed for indexable-insert face milling Reduced-changeover fastenings for quick insert replacement Balanced geometry for stable cutting FAQ What insert type is required for this face mill? The face mill is specified for RHKW 1003 indexable inserts; compatible inserts from Ingersoll may also be used. Which arbor size is needed to mount the cutter? The cutter uses a 22 mm arbor bore, compatible with standard 22 mm adaptors and toolholders. How many cutting edges does the tool have and what is the benefit? The cutter features six cutting edges, which helps distribute chip load, increase material removal rate and improve surface finish consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a reliable combination of sturdy clamping, high material removal rate and fast insert changes for uninterrupted milling cycles; order the Teknik Makina round insert milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Round insert milling cutter T614TM — Ø63 mm, 6 cutting edges | Teknik Makina Round insert milling cutter T614TM designed for indexable milling with RHKW 1204 inserts, ideal for high-efficiency face and shoulder operations where quick insert changes and stable cutting are required Ø63 mm diameter for stable engagement 6 cutting edges for steady material removal 22 mm shank for secure clamping Compatible with RHKW 1204 indexable inserts Greater throughput through optimised cutter geometry The Ø63 mm body with 6 cutting edges delivers a balance between stock removal and surface quality. The multiple cutting edges distribute cutting forces and reduce chip load per edge, which improves feed stability and lowers the risk of chatter in many milling setups. Designed for indexable tooling, this cutter accepts RHKW 1204 inserts, enabling short tool-change routines and consistent cutting performance. The combination of insert interchangeability and robust cutter diameter supports higher cumulative material removal per tool life cycle, making the tool suitable for repetitive production runs and mixed-batch machining. Secure fastening for reduced vibration and longer component life Clamping integrity is central to predictable results. The cutter employs a M3.5 clamping screw and a retention screw M4x10, tightened with a T15 Torx key to ensure secure seat of the insert and minimised micro-movement during cutting. A 22 mm shank provides a firm toolhold in standard holders, improving concentricity and reducing runout that shortens insert life. By limiting unwanted movement at the cutting edge, the design contributes to repeatable tolerances and fewer rejects in serial production, translating into lower process costs and less rework. Seamless integration into indexable milling workflows This indexable face cutter is intended for straightforward integration into existing milling processes where indexable inserts are preferred for fast service and repeatable geometry. The tool’s compatibility with Ingersoll-type inserts and the standardised screw/key arrangement reduce setup time and spare-part complexity at the tool crib. Supplied and supported via Metav Werkzeuge, the cutter benefits from a European distribution network that emphasises dependable stock levels and application support — an asset when maintaining uninterrupted production. For bespoke fixture or process questions, technical consultation is available to ensure the milling solution meets the required cycle and component specifications. Contact Metav Werkzeuge for tailored machining advice and to secure the Teknik Makina round insert milling cutter T614TM with Ø63 mm and RHKW 1204 compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T614TM Manufacturer: Teknik Makina Description: Round insert milling cutter for RHKW 1204 indexable inserts Compatible inserts: RHKW 1204 Facts Diameter: 63 mm Cutting edges: 6 Shank diameter: 22 mm Overall length: 45 mm Weight: 0.556 kg Special features Clamping screw: M3.5 Retention screw: M4x10 Torx key: T15 Compatible with Ingersoll inserts FAQ Which inserts fit this cutter? The cutter accepts RHKW 1204 indexable inserts; compatibility with Ingersoll-type inserts is stated for the T614TM. What fastening hardware is used? Clamping uses a M3.5 screw with a retention screw M4x10, tightened with a T15 Torx key as specified for the T614TM. What are the main dimensions of the tool? Key dimensions: Ø63 mm diameter, 22 mm shank and 45 mm overall length; weight is 0.556 kg. Is the cutter suitable for series production? The design of the tool supports indexable milling operations where fast insert changes and consistent cutting performance are required, making it appropriate for repeated production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 50 mm shank rigidity and a 95° cutting angle to secure stable insert engagement and consistent tool performance; suitable for operations that require compact, heavy-duty boring bars. Order the tool directly via Metav Werkzeuge or request specialist advice from the technical team. S50U DCLNR Boring Bar – 50 mm shank, 95° cutting angle (Teknik Makina) S50U DCLNR boring bar for turning applications with CN-- 1204 indexable inserts, designed for right-hand cutting and heavy-duty toolholding 50 mm shank diameter for rigidity Compatible with CN-- 1204 inserts 95° cutting angle for secure insert seating Overall length 350 mm, weight 5.166 kg Stable design for reduced vibration and reliable engagement The S50U DCLNR is built around a robust 50 mm shank, which contributes to enhanced stability during heavy cuts and long overhangs. A solid shank diameter reduces deflection and vibration, improving dimensional consistency when paired with a suitable toolholder. The combination of a larger sectional diameter and a 63 mm outer diameter ensures a firm seating in the clamping system, translating into more predictable machining results and fewer stoppages for tool rework. Precise insert interface and cutting geometry for dependable results The tool is specified for CN-- 1204 indexable inserts and features a 95° cutting angle that supports dependable insert clamping and approach geometry. This configuration is optimised for standard right-hand turning operations, providing a predictable engagement angle that simplifies process planning. The clearly defined insert compatibility reduces setup uncertainty and shortens changeover time, while the standardised interface supports a broad range of indexable grades and chipformer choices. Practical dimensions and handling for workshop integration With an overall length of 350 mm and a recorded mass of 5.166 kg, the boring bar balances reach with controllable inertia for most lathes and turning centres. The specified cutting-edge height of 60 mm supports compatibility with common toolholders and an established clamping system (designation 12). These measurable values make integration into existing tool sets straightforward and allow maintenance teams to plan handling and storage with confidence. The tool’s right-hand orientation simplifies ordering and inventorying for conventional turning tasks. Why this boring bar suits professional workshops Engineered for industrial use, the boring bar combines rigid shank geometry and a standardised insert interface to reduce downtime and enhance process repeatability. Using a tool with consistent, documented dimensions helps purchasing and production planners to standardise tooling across multiple machines. Metav’s distribution from Emmerich acts as a quality filter for the European market, ensuring that workshops receive a consistent product backed by a broad catalogue and specialist advice when required. For technical consultation or to procure the S50U DCLNR boring bar, contact Metav Werkzeuge in Emmerich — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 — Metav’s precision team will advise on application fit and delivery options. Technical data Article number: K406TM Manufacturer: Teknik Makina ISO designation: S50U DCLNR For inserts: CN-- 1204 Cutting direction: right Facts Shank diameter: 50 mm Cutting-edge height: 60 mm Overall length: 350 mm Weight: 5.166 kg Diameter: 63 mm Cutting angle: 95° Clamp size designation: 12 Special features DCLN style boring bar for indexable inserts Right-hand cutting configuration Designed for standard CN-- 1204 insert geometry FAQ Which inserts fit this boring bar? The boring bar is compatible with CN-- 1204 indexable inserts; matching insert grades should be selected according to workpiece material and cutting conditions for the S50U DCLNR boring bar (SKU K406TM). Is the tool suitable for left-hand cutting? No, the tool is configured for right-hand cutting as specified in the product data; left-hand operations require a corresponding left-hand toolholder or variant. What are the main dimensions to consider when planning the setup? Key dimensions for setup are the 50 mm shank diameter, overall length 350 mm, cutting-edge height 60 mm, and the 95° cutting angle, which all inform clamping, reach and insert positioning. How does the cutting angle influence performance? A 95° cutting angle provides a secure insert approach and seating geometry that aids repeatability in turning tasks and supports consistent chip formation when combined with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of high rigidity, precise insert compatibility and predictable chip control for stable turning results; order the S50U DCLNL boring bar via Metav Werkzeuge or request guidance from our technical consultants. S50U DCLNL boring bar — left‑hand indexable tool for CN-- 1204 inserts by Teknik Makina The S50U DCLNL boring bar is a left‑hand tool holder designed for robust internal turning with CN-- 1204 indexable inserts, suitable for demanding lathe or CNC operations where stability and repeatable results are required. Left‑hand cutting for specialised turning operations Compatible with CN-- 1204 insert format Sturdy 50 mm shank for enhanced rigidity 350 mm overall length for deep boring Stable performance through optimised tool geometry The S50U DCLNL was developed to deliver consistent metal removal where rigidity and vibration damping are decisive for finish and tool life. With a 50 mm shank and a body diameter 63 mm, the holder reduces deflection on longer overhangs and supports heavier cuts without compromising accuracy. The combination of mass and geometry—reflected in the listed weight 5.166 kg and a cutting angle 95°—improves tool stability, which in turn optimises cycle times and extends the service interval for inserts and clamping components. This approach targets measurable productivity gains in serial production environments. Straightforward integration and predictable insert behaviour Compatibility with standard indexable formats simplifies tooling management and reduces changeover time. The holder accepts CN-- 1204 inserts and ensures a controlled chip flow thanks to the specified geometry and cutting height 60 mm, which secures the insert seat and repeatability after re‑indexing. The left‑hand orientation supports machining strategies that require counter‑direction turning or specific approach angles on CNC lathes. For workshops standardising on indexable tooling, the result is fewer inventory variants and more predictable process windows. Quick setup, reliable clamping and lower downtime Designed for practical workshop use, the bar features a clear clamp specification (designation 12) and an ISO designation that indicates familiar mounting and handling routines. The precise clamp interface and robust construction reduce the need for frequent torque checks and rework, which helps maintain uptime on the machine. When paired with consistent tool‑holder handling and regular inspection, the S50U DCLNL supports stable tolerance adherence and fewer scrap parts, contributing to a leaner production flow and predictable throughput. Contact Metav Werkzeuge for tailored tooling advice and immediate application support on the S50U DCLNL boring bar; Metav Werkzeuge’s specialists in Emmerich can advise on machine setup and insert selection via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: K486TM Manufacturer: Teknik Makina ISO designation: S50U DCLNL Classification (eClass): 21180806 Files: 62de7e35bd24461b3d5f7a1b, 62de7ed5148ec6b71020ffb1 Dimensions & Weights Diameter: 63 mm Overall length: 350 mm Shank diameter: 50 mm Cutting height: 60 mm Weight: 5.166 kg Cutting angle: 95° Compatibility & Features For indexable inserts CN-- 1204 Left‑hand cutting direction Clamp holder designation: 12 Optimised for lathe/CNC boring applications FAQ Which inserts are compatible with this boring bar? The S50U DCLNL boring bar is compatible with CN-- 1204 indexable inserts; this standard format ensures ready availability and straightforward re‑indexing. Is the tool suitable for deep boring operations? With an overall length of 350 mm and a 50 mm shank, this boring bar is intended for extended reach and controlled rigidity in deeper bores. What does the 95° cutting angle mean for operation? A 95° cutting angle provides a stable engagement geometry that favours side cutting strength and consistent surface finish in turning and boring tasks. How does the shank diameter affect performance? The 50 mm shank increases resistance to bending and vibrations, improving dimensional accuracy and extending insert life under moderate to heavy cutting conditions. Which designation should be quoted when ordering or referencing this tool? Reference the ISO designation S50U DCLNL and article number K486TM to ensure correct ordering and compatibility checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of a 50 mm shank and 65 mm cutting height for stable, repeatable boring operations; the compatibility with DN-- 1506 indexable inserts provides cost-effective regrinding cycles. Order the S50U DDQNL boring bar directly via Metav Werkzeuge or request technical advice from our consultants. S50U DDQNL boring bar — 50 mm shank, DN-- 1506 compatible, left-hand cut The S50U DDQNL is a precision boring bar designed for turning and internal machining with DN-- 1506 indexable inserts in left-hand cutting applications. 50 mm shank diameter for stable clamping 65 mm cutting height for deep operations Compatible with DN-- 1506 indexable inserts Left-hand cutting direction for specialised turning Improved process stability for precision boring The design delivers stable clamping and consistent cutting geometry by combining a substantial 50 mm shank with a 63 mm overall diameter, which reduces vibration during heavy cuts. This stability translates into improved repeatability and surface quality when machining bores or internal features. Operators and production engineers benefit from fewer tool offsets and reduced rework, since the robust configuration minimises chatter and maintains insert position under load. Clear compatibility and straightforward tooling choices Compatibility with DN-- 1506 indexable inserts makes selection and stocking straightforward for workshops that already standardise on DN-- series tooling. The bar is built to accept DDQN-style holders for those inserts, ensuring correct seating and secure clamping of the insert. The left-hand cutting orientation is specified for operations that require reversing the cutting direction; this avoids ambiguity at the machine setup stage and supports systematic tool planning across CNC turning centres. Dimensioning that supports shop-floor planning With a total length of 350 mm, a 65 mm cutting height and a declared mass of approximately 5.166 kg, the bar suits medium to heavy-duty turning operations where reach and rigidity matter. The ISO designation S50U DDQNL identifies the shank and insert interface clearly, simplifying procurement and tool management. The specified 107.5° cutting angle ensures effective chip control with the matched DN-- insert geometry, enabling predictable machining feeds and depths. Contact Metav Werkzeuge today for availability, fitting recommendations and application support for the Teknik Cutting Tools S50U DDQNL boring bar (SKU K536TM) Technical data Article number: K536TM Manufacturer: Teknik Cutting Tools Model designation: S50U DDQNL Article description: DDQN for DN-- Indexable Inserts eClass: 21180806 Shaft diameter: 50 mm Overall length: 350 mm Diameter: 63 mm Cutting height: 65 mm Weight: 5.166 kg Cutting angle: 107.5° Compatible inserts: DN-- 1506 Cutting direction: Left-hand Clamp holder designation: 15 Application: Boring / internal turning Suitable for DDQN indexable insert holders FAQ Which inserts fit this boring bar? The S50U DDQNL boring bar is specified for DN-- 1506 indexable inserts and accepts DDQN-style insert holders designed for that insert family. Is the cutting direction fixed for left-hand operations only? Yes, the tool is supplied for left-hand cutting; the geometry and insert orientation are optimised for left-turning applications. What are the key dimensions to check for machine compatibility? Check the 50 mm shank diameter, the 350 mm overall length and the bar diameter 63 mm to ensure the S50U DDQNL fits the turret and provides sufficient clearance. Can the S50U DDQNL be used on heavy-duty turning tasks? The combination of a solid 50 mm shank, a 65 mm cutting height and a mass of about 5.166 kg provides rigidity suitable for medium to heavy-duty operations when used with appropriate feeds and machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve stable internal turning with the K479TM boring bar thanks to its robust 50 mm shank, 65 mm cutting height and compatibility with DN--1506 indexable inserts, resulting in predictable chip control and repeatable bore accuracy; order the K479TM directly via Metav Werkzeuge or consult the specialists for tailored application advice. K479TM S50U DDQNR Boring Bar — 50 mm shank, 350 mm overall length (Teknik Makina) K479TM is a precision boring bar designed for internal turning with indexable DN--1506 inserts, offering a compact profile and right-hand cutting for reliable machining in production environments. Right-hand cutting direction 50 mm shank diameter 65 mm cutting height For DN-- 1506 indexable inserts 350 mm overall length Precision and process stability for internal bores The S50U DDQNR configuration provides a stiff 50 mm shank and a controlled overhang that reduces deflection during interrupted cuts. With a nominal diameter of 63 mm and an overall length of 350 mm, this boring bar is engineered to deliver consistent concentricity when paired with appropriate holders. The 65 mm cutting height ensures correct insert seating and secure clamp engagement, which translates into more accurate hole diameters and fewer rework cycles. These attributes combine to reduce cycle variability and improve first-pass yield in serial production. Compatibility and secure clamping for fast tool changes Built to accept DN--1506 indexable inserts, the bar uses a proven clamping concept that enables quick index changes and repeatable positioning. The specification S50U DDQNR denotes a standardised interface compatible with common turning systems, so tool-change downtime is minimised. The included clamping-holder reference (15) and the right-hand cutting orientation ensure the assembly is aligned with standard lathe toolposts. For operations where tool-change speed and repeatability are priorities, this setup significantly reduces non-productive time and supports lean machining workflows. Machining performance and application suitability The tool geometry, with a cutting angle of 107.5°, balances cutting forces and chip flow for internal turning tasks, helping to avoid chatter on longer bores. At a weight of 5.166 kg, the bar provides mass for vibration damping while remaining manageable for installation and inspection. Its configuration suits a wide range of turning tasks where indexable inserts are preferred for economical edge changes — from prototype shops to light industrial production. The robust construction contributes to predictable tool life and simplifies tool management across the workshop. For application advice or to discuss the K479TM S50U DDQNR boring bar for a specific machining challenge, contact Metav Werkzeuge directly by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930; Metav’s specialists can recommend holders, insert grades and cutting parameters to match the production requirement. Technical Data Article number: K479TM Manufacturer: Teknik Makina SKU: K479TM Numbers / Core technical data Shank diameter: 50 mm Cutting height: 65 mm Diameter: 63 mm Overall length: 350 mm Weight: 5.166 kg Cutting angle: 107.5° Designs / Special features ISO designation: S50U DDQNR For indexable inserts: DN-- 1506 Clamping-holder reference: 15 Cutting direction: Right-hand Type: DDQN for DN-- indexable inserts FAQ What insert type does this boring bar accept? The K479TM boring bar is designed for DN--1506 indexable inserts, providing standardised seating and repeatable positioning for quick index changes. Is the cutting direction configurable? This model is specified for right-hand cutting; the S50U DDQNR form factor is intended for right-hand internal turning operations. What are the key dimensions to check for holder compatibility? Verify the 50 mm shank diameter, overall length 350 mm and 65 mm cutting height to ensure correct fit with the intended clamping system and toolpost. Can the K479TM be used for long-reach boring? The design offers stiffness for moderate overhangs, but for very long-reach boring operations a specialised long-reach bar should be considered; consult Metav Werkzeuge for parameter recommendations. Which ISO designation identifies this bar? The bar carries the S50U DDQNR designation, indicating the standardised shank and head geometry suitable for compatible holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, left‑hand turning solution that combines precise shank stability and insert compatibility for efficient internal machining; order the bar directly via Metav Werkzeuge or consult our specialists for tailored application advice. S50U DDUNL boring bar — 50 mm shank, left‑hand cutting (Teknik Makina) The S50U DDUNL is a left‑hand boring bar designed for internal turning with DN-- 1506 indexable inserts, offering high rigidity for stable machining in workshop and production environments. Left‑hand cutting direction 50 mm shank diameter Compatible with DN-- 1506 inserts 350 mm overall length, 63 mm head diameter Greater rigidity for consistent internal bores The solid 50 mm shank and the bar’s overall design deliver enhanced rigidity, which reduces vibration during internal turning and improves bore accuracy. For components where dimensional repeatability is critical, the increased stiffness minimises deflection and enables more consistent finishes. The tool’s mass (approx. 5.153 kg) contributes to stable cutting dynamics without sacrificing handling during setup, supporting reliable cycle times in small-batch and serial production alike. Predictable cutting geometry and chip control Engineered for DN-- 1506 indexable inserts, the boring bar provides a defined cutting angle of 93° and a cutting height of 65 mm, ensuring a consistent engagement geometry. This predictable interface between insert and workpiece simplifies grade selection and process planning: the standard insert pocket and clamping arrangement speed up insert changes and support controlled chip flow, which helps maintain surface quality and extend insert life under steady cutting conditions. Designed for efficient workshop integration With an overall length of 350 mm and a head diameter of 63 mm, the bar fits common lathe set-ups while offering enough reach for deeper internal operations. The left‑hand orientation is specified for applications requiring reverse cutting direction; fitting the correct handedness reduces set-up errors and prevents unintentional tool overloading. The ISO designation and standardised interface make the component straightforward to document in tool lists and to integrate into existing machining cells for rapid changeovers. Practical benefits for process reliability Beyond geometry, the boring bar focuses on operational advantages: standardised insert compatibility reduces tooling variety, the robust shank improves tool life through lower chatter, and the well‑defined mounting form reduces rework from misalignment. These attributes translate into fewer stoppages, steadier surface finishes and predictable tool‑room inventory—factors that contribute to smoother production workflows and greater throughput in metalcutting operations. Contact Metav Werkzeuge today to specify the Teknik Makina S50U DDUNL boring bar for rigid, left‑hand internal turning and benefit from expert advice and secure supply from Emmerich. Technical data Article number: K496TM Manufacturer: Teknik Makina ISO designation: S50U DDUNL Article name: DDUN for DN-- insert Facts Shank diameter: 50 mm Cutting height: 65 mm Cutting angle: 93° Head diameter: 63 mm Overall length: 350 mm Weight: 5.153 kg Cutting direction: left Insert type: DN-- 1506 Special features Compatible with DN-- 1506 indexable inserts Left‑hand cutting orientation ISO shank form S50U Suited for internal turning and boring operations FAQ What insert type fits this boring bar? The bar accepts DN-- 1506 indexable inserts; the S50U DDUNL interface is sized for that insert family. Is the cutting direction left‑hand or right‑hand? This model is specified for left‑hand cutting; the S50U DDUNL boring bar is designed accordingly. What are the key dimensions to check for machine compatibility? Critical dimensions include the 50 mm shank, 350 mm overall length and the 63 mm head diameter; verify these against the machine turret and clearance. How does the shank diameter affect performance? A 50 mm shank increases rigidity and reduces deflection during internal turning, improving bore accuracy and surface finish. Can the boring bar be used for heavy interrupted cuts? The robust shank and mass enhance stability for demanding cuts, but final suitability depends on insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of robust shaft geometry and insert compatibility delivers stable internal boring with predictable tool life; benefit from the 50 mm shaft and DN--1506 insert fit for consistent production results. Order directly via Metav Werkzeuge or contact our consultants for application advice. S50U DDUNR Boring bar – Right-hand, for DN--1506 indexable inserts (Teknik Makina) A S50U DDUNR boring bar designed for precision internal machining with right-hand cutting and a 350 mm overall length. Right-hand boring bar, 93° cutting angle 50 mm shaft diameter for stable clamping Compatible with DN--1506 indexable inserts Total length 350 mm, solid construction Stability and accuracy for repeatable internal bores The solid design and substantial mass provide vibration damping that supports precise boring operations. With a 50 mm shaft and a body diameter of 63 mm, the tool resists deflection under load, which reduces bore runout and improves surface finish. The 93° cutting angle positions the insert for effective metal removal while maintaining bore geometry. Use of standard indexable inserts simplifies replenishment and ensures consistent cutting performance across production runs. Higher uptime through predictable wear and quick insert changes Equipped for indexable tooling, the concept focuses on efficiency: insert changes are swift and economical, leading to shorter downtimes and steady cycle times. The 65 mm cutting height allows robust engagement with the workpiece while preserving insert life through favourable cutting geometry. Right-hand cutting direction supports conventional lathe setups and predictable chip evacuation, contributing to reliable throughput and cost-effective tool management in series production. Ease of set-up and workshop integration The 350 mm overall length and the ISO-style designation make integration into existing toolholders straightforward. The tool is identified by its ISO code S50U DDUNR, which helps matching with holders and clamping systems; the specified clamping holder designation is 15, aiding quick procurement of the correct fixture. At 5.153 kg the assembly delivers stabilising mass for medium-duty internal turning tasks without requiring special balancing, while compatibility with DN--1506 inserts standardises spare-part stocking for maintenance teams. Contact Metav Werkzeuge for tailored tooling recommendations and local supply coordination; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the S50U DDUNR and suitable DN--1506 inserts. Technical Data Article number: K416TM Manufacturer: Teknik Makina ECLASS: 21180806 ISO designation: S50U DDUNR Core data Shaft diameter: 50 mm Cutting height: 65 mm Overall length: 350 mm Body diameter: 63 mm Cutting angle: 93° Weight: 5.153 kg Special features Compatible inserts: DN-- 1506 Cutting direction: right-hand Clamping holder designation: 15 Intended use: internal boring with indexable inserts FAQ Which indexable inserts fit this boring bar? The tool is compatible with DN--1506 indexable inserts; the bar accepts the DDUN-style insert seat as indicated by the DDUN notation. Is the cutting direction right- or left-hand? This boring bar is designed for right-hand cutting, suitable for standard lathe orientations and conventional internal turning operations. What are the shaft diameter and overall length? The bar has a 50 mm shaft diameter and an overall length of 350 mm, listed under SKU K416TM for ordering and replacement references. What does the ISO designation S50U DDUNR indicate? The ISO code S50U DDUNR identifies the tool geometry and the DDUNR insert seat variant; it assists in matching the bar to compatible holders and insert types. Which clamping holder is recommended for mounting? The supplied data specifies a clamping holder designation of 15, which should be selected to ensure secure mounting and correct seating of the bar Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust ISO-design boring bar with a 50 mm shank and 350 mm overall length for improved stability and repeatable internal turning results; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. S50U DDWNR Boring Bar — DDWNR for DN-- 1506 indexable inserts (Teknik Makina) A sturdy S50U DDWNR boring bar engineered for internal turning operations, compatible with DN-- 1506 indexable inserts and optimised for right-hand cutting. S50U DDWNR ISO design for secure insert clamping Compatible with DN-- 1506 indexable inserts 50 mm shank diameter for stable machining 350 mm overall length for deep bores Precision and stability for internal boring The S50U DDWNR holder combines a rigid 50 mm shank with a long, 350 mm profile to reduce vibration during internal turning. That rigidity translates into a more consistent cutting line and improved surface finish when working in confined bores. The relatively high cutting angle of 62.5° helps to distribute cutting forces, which reduces chatter risk and extends insert life. For machine shops requiring predictable repeatability, this design offers a practical way to increase process stability without changing machine setup. Compatibility, insert handling and machining efficiency Designed for DN-- 1506 indexable inserts, this DDWNR-style holder supports efficient insert changes and secure clamping for stable cuts. The right-hand cutting orientation and the ISO-style configuration mean the tool fits common turret and toolpost arrangements without modification. Explaining technical terms: an indexable insert is a replaceable cutting tip, so only the tip is renewed when worn, reducing toolholding costs and downtime. The combination of 350 mm overall length and appropriate insert geometry enables access to deeper bores while maintaining control over chip formation and heat at the cutting edge. Durability, workshop integration and practical benefits At a weight of 5.298 kg, the assembly signals a robust construction suited to industrial usage where tool stability matters. The nominal 63 mm body diameter around the cutting zone helps maintain alignment under load, which supports repeatable tolerances in batch production. For engineering teams, the primary benefits are reduced rework and longer intervals between tool changes; for maintenance staff, the ISO-style holder simplifies inventory, since the same DN-- 1506 inserts can be stocked for multiple tool types. Overall, the design is intended to integrate smoothly into existing turning workflows while improving process reliability. For firm, vibration‑free internal turning with the Teknik Makina S50U DDWNR, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K468TM Manufacturer: Teknik Makina ISO designation: S50U DDWNR Product type: DDWNR for DN-- 1506 indexable inserts Core measurements Shank diameter: 50 mm Overall length: 350 mm Cutting height: 60 mm Cutting angle: 62.5° Diameter: 63 mm Weight: 5.298 kg Compatibility & features Compatible inserts: DN-- 1506 Cutting direction: right-hand Suitable for indexable insert machining ISO-style holder design FAQ Which indexable inserts fit this holder? The holder is specified for DN-- 1506 indexable inserts; the DDWNR configuration accepts these standard inserts for straightforward replacement and inventory planning. Is the cutting direction right-hand or left-hand? This boring bar is configured for right-hand cutting, matching typical turret and toolpost setups for internal turning. What are the shank diameter and overall length? The tool features a 50 mm shank and a 350 mm overall length, combining rigidity with reach for deeper bores. What benefits does the 62.5° cutting angle provide? A 62.5° cutting angle helps distribute cutting forces and can reduce chatter while promoting favourable chip flow, improving surface finish and insert life in many internal turning tasks. How heavy and robust is the assembly? With a mass of 5.298 kg, the boring bar is built for industrial use and designed to maintain alignment and stability under cutting loads. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 50 mm shank and DWLN geometry for rigid, repeatable internal turning and reliable tool life; order the Boring Bar S50U DWLNL directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar S50U DWLNL – DWLN for WN-- Indexable Inserts, left-hand, 50 mm shank (Teknik Makina) The Boring Bar S50U DWLNL is a left-hand, heavy-duty internal turning tool designed for DWLN insert geometry and industrial workshop applications, optimised for stable clamping and consistent chip formation. Left-hand cutting orientation 50 mm shank for secure clamping Compatible with WN-- 0804 inserts 95° cutting angle for positive engagement Boost productivity through stable, predictable cutting The combination of DWLN geometry and a 50 mm shank gives a measurable increase in process stability. The tool’s geometry promotes controlled chip flow and repeatable engagement, which reduces vibration and contributes to longer insert life. For production environments where cycle time and reproducibility matter, the robust shank diameter and the bar’s mass distribution stabilise the cut, resulting in fewer rejects and less rework. This technical design translates directly into economic benefits by lowering tool consumption and machine downtime. Secure clamping and reliable seating for consistent results A secure toolholding interface and the bar’s dimensions deliver improved clamping rigidity. The 95° cutting angle supports a positive cutting action that reduces entry forces and improves surface finish during internal turning. The bar’s external diameter and overall mass are optimised so that the tool remains steady under load, enabling accurate depth control and predictable wear patterns on indexable inserts. In short, the mechanical design reduces the need for frequent readjustment and helps maintain machining tolerances across longer production runs. Fast insert changes and wide workshop compatibility Built to accept WN-- 0804 indexable inserts, the bar simplifies insert replacement and tool setup, helping to keep maintenance times low. The ISO designation S50U DWLNL indicates standardised fitting and orientation, which eases integration into existing tool inventories and shortens changeover times. The left-hand cutting direction is suitable for internal turning operations that require counter-clockwise feed relative to the spindle. Combined with its sturdy shank and proven insert family, this tooling is a practical choice for workshops seeking to balance throughput and repeatability. Contact Metav Werkzeuge for tailored advice on integrating the S50U DWLNL into production—call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss suitability and availability. Technical Data SKU: K506TM Manufacturer: Teknik Makina ISO designation: S50U DWLNL Article type: DWLN for WN-- Indexable Inserts Core data Shank diameter: 50 mm Overall length: 350 mm Weight: 5.123 kg Cutting height: 75 mm Cutting angle: 95° Diameter: 63 mm Special features Compatible with WN-- 0804 inserts Left-hand cutting direction Clamp designation: 08 DWLN geometry for indexable inserts FAQ Which inserts fit this boring bar? The boring bar accepts WN-- 0804 indexable inserts; compatibility is specified for the DWLN geometry. Is the cutting direction left-hand or right-hand? This tool is manufactured for left‑hand cutting, as indicated by the DWLNL designation. What is the shank diameter and overall length? Shank diameter is 50 mm and overall length is 350 mm, as listed for the S50U DWLNL bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a 50 mm shank for stable clamping and compatibility with WN-- 0804 indexable inserts to secure consistent machining quality; the right-hand S50U DWLNR configuration with a 95° cutting angle improves chip flow and process repeatability. Order the boring bar via Metav Werkzeuge or consult our specialists for application support. Boring bar S50U DWLNR (DWLN for WN-- indexable inserts) — 50 mm shank, 350 mm overall length (Teknik Makina) The Boring bar S50U DWLNR is a right-hand tool holder designed for DWLN-style indexable inserts (WN-- 0804), intended for stable turning and boring operations in workshop and production environments 50 mm shank for robust clamping Accepts WN-- 0804 indexable inserts Right-hand cutting with 95° cutting angle 63 mm diameter, 350 mm overall length Improved process stability through a rigid shank A robust 50 mm shank delivers increased torsional stiffness and reduced vibration during turning, which directly improves surface finish and extends tool life. Built to a compact balance of mass and strength, the configuration minimises chatter when machining less rigid workpieces and helps maintain dimensional accuracy over longer cycle times. The measurable benefit is consistent part quality and fewer interruptions for rework or tool replacement. Fast insert changes and predictable cutting behaviour The DWLN-style interface is engineered for use with WN-- 0804 indexable inserts, enabling quick and repeatable insert replacement without complex setup. With a cutting height of 75 mm and right-hand geometry, the holder positions the insert reliably for stable engagement; the 95° cutting angle supports effective chip formation and control in common turning tasks. This combination reduces machine downtime and simplifies tool inventory management for production planners. Practical dimensions for versatile workshop use With a 63 mm diameter and 350 mm overall length, the holder balances reach with rigidity, making it suitable for short- to medium-reach boring and external turning where stability matters. The unit weight of 5.123 kg contributes to a solid clamping feel while remaining manageable for tool changeovers. Identified as S50U DWLNR and stocked under SKU K426TM, the tool integrates into standard turret and boring bar setups that accept DWLN-style tooling systems, streamlining procurement and setup efforts. For precise turning performance and advice on integrating the Teknik Cutting Tools boring bar into existing processes, contact Metav Werkzeuge for tailored guidance by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: K426TM Manufacturer: Teknik Makina ISO designation: S50U DWLNR Model description: DWLN for WN-- indexable inserts Dimensions & Weights Shank diameter: 50 mm Cutting height: 75 mm Tool diameter: 63 mm Overall length: 350 mm Weight: 5.123 kg Cutting angle: 95° Compatibility & Features Compatible inserts: WN-- 0804 Cutting direction: right-hand Insert interface: DWLN style Tool type: indexable insert boring bar FAQ Which insert type fits this tool holder? The Teknik Cutting Tools boring bar (S50U DWLNR, SKU K426TM) accepts WN-- 0804 indexable inserts and uses the DWLN-style interface for secure seating and repeatable positioning. What is the cutting direction of the holder? The holder is configured for right-hand cutting, as specified for the S50U DWLNR tool. What key dimensions should be considered for machine setup? Important dimensions are shank diameter 50 mm, overall length 350 mm, tool diameter 63 mm and cutting height 75 mm; these determine clamping and reach requirements. What cutting angle is provided by the tool geometry? The tool holder provides a 95° cutting angle, optimised for stable engagement and predictable chip flow in standard turning operations. Is this boring bar suitable for quick insert changes? Yes — the DWLN interface and use of WN-- 0804 indexable inserts support fast, repeatable insert changes and straightforward reconditioning of the cutting edge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise geometry, robust clamping and long reach for stable finishing cuts; the compatibility with TNMG 1604 indexable inserts reduces tooling inventory and improves uptime. Order this boring bar directly via Metav Werkzeuge or consult the technical team for application support. Boring bar — MTENR for TNMG 1604 indexable inserts, Ø50 mm shank, 350 mm length (Teknik Makina) A boring bar (S50U MTENR) designed for right-hand turning operations using TNMG 1604 indexable inserts, offering extended reach and stable clamping for metalworking applications Compatible with TNMG 1604 indexable inserts Ø50 mm shank for secure clamping 350 mm overall length for deep reach Stable geometry for consistent material removal The tool's geometry, defined by the 60° cutting angle and an optimised insert pocket, delivers predictable chip flow and reduced vibration during turning. As a result, surface finish and dimensional repeatability are improved when machining common metals. The use of standard indexable inserts allows quick index changes, lowering set-up time and ensuring consistent cutting conditions across production runs. Secure clamping and rigid toolholding A Ø50 mm shank provides a high clamping surface for standard toolholders, increasing stiffness at the tool-to-holder interface and reducing deflection in interrupted cuts. The S50U MTENR designation indicates a robust shank and holder fit compatible with typical lathe toolposts, which supports stable finishing passes and longer tool life under moderate cutting forces. Compatibility that simplifies tooling logistics Designed specifically for TNMG 1604 inserts, the boring system standardises the cutting edge across turning operations. Using widely available indexable inserts simplifies spares management and reduces inventory complexity. The option to run common grades of TNMG inserts enables fine-tuning of wear resistance and surface quality without replacing the boring bar itself. Reach and balance for industrial turning tasks With a 350 mm overall length and an outside diameter of 63 mm, the bar is suited for deeper internal and external turning where accessibility is required. The specified cutting height of 70 mm aligns the insert seat for proper rake and clearance, helping to maintain cutting stability over extended overhangs. The component's mass and design balance contribute to reduced chatter and a steadier machining process. For reliable turning with TNMG 1604 inserts choose Teknik Makina's S50U MTENR boring bar — contact Metav Werkzeuge for delivery details and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K462TM SKU: K462TM Brand: Teknik Makina ISO designation: S50U MTENR Designation: MTENR for TNMG 1604 Indexable Inserts Compatible inserts: TNMG 1604 Cutting direction: right Facts Shank diameter: 50 mm Cutting height: 70 mm Overall length: 350 mm Outside diameter: 63 mm Weight: 5.125 kg Cutting angle: 60° Special features Right-hand cutting configuration Indexable-insert system for fast servicing Robust shank for improved rigidity Suited to industrial turning and finishing tasks Tekinik Makina manufacturing FAQ What insert type is required for this boring bar? The boring bar is specified for TNMG 1604 indexable inserts and is compatible with standard grades of that insert type for turning operations. What are the key dimensions for clamping and reach? Shank diameter is 50 mm and the overall length is 350 mm, offering a balance of clamp compatibility and extended reach for deeper cuts. Is the cutting direction defined for this tool? Yes, the tool is configured for right-hand cutting, as indicated in the technical designation. How does the 60° cutting angle affect machining? A 60° cutting angle provides a compromise between shear cutting action and tool strength, supporting reliable chip formation and improved surface finish in common metalworking applications. What is the ISO designation and why is it important? The ISO designation S50U MTENR identifies the shank size and tool style, ensuring the correct toolholder match and predictable performance in standard lathe tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, proven compatibility with TNMG 1604 inserts and extended reach for reliable turning cycles — order directly via Metav Werkzeuge or ask our consultants for tailored advice. S50U MTUNR Boring Bar — 50 mm Shank, 350 mm Overall Length by Teknik Makina The S50U MTUNR is a right-hand boring bar designed for external turning with MTUN seat for TNMG indexable inserts, suited to workshop and production turning tasks. 50 mm shank for stable clamping Compatible with TNMG 1604 inserts 350 mm overall length for extended reach Stable clamping for precise, repeatable cuts The substantial 50 mm shank and a body diameter of 63 mm combine to provide a rigid mounting interface, which reduces vibration and improves surface finish during external turning. A heavier tool body (5.15 kg) increases inertial stability for interrupted cuts and long overhangs; this contributes to longer insert life and fewer rework cycles. The result is a measurable improvement in part consistency and process reliability for production runs. Fast insert changes and predictable chip control Designed around the MTUN for TNMG seat, the tool accepts TNMG 1604 indexable inserts, enabling quick tool changes and consistent geometry at the cutting edge. The specified cutting height of 65 mm and a 93° cutting angle ensure the insert sits at the intended centre-line and offers predictable engagement with the workpiece. These attributes lower set-up times and make process planning more straightforward, since insert choice and clamping are standardised across many turning operations. Extended reach while maintaining workshop efficiency With an overall length of 350 mm, the bar provides access to deeper bores or extended overhangs without sacrificing stability when clamped correctly. The design is compatible with clamping holders of size 16, allowing integration into existing tool posts and turrets. The ISO designation S50U MTUNR reflects a standardised tool form that simplifies inventory and replacement planning for maintenance teams and production buyers, helping to centralise tooling supplies and reduce downtime. For precision external turning with proven insert compatibility, contact Metav Werkzeuge to discuss Teknik Makina’s S50U MTUNR boring bar (SKU K448TM) and receive personalised guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K448TM Manufacturer: Teknik Cutting Tools ISO designation: S50U MTUNR Eclass: 21180806 Dimensions & core data Shank diameter: 50 mm Overall length: 350 mm Body diameter: 63 mm Cutting height: 65 mm Weight: 5.15 kg Cutting angle: 93° Clamping holder size: 16 Suitable inserts: TNMG 1604 Cutting direction: right Features & applications MTUN seat for TNMG indexable inserts Right-hand boring bar for external turning Quick insert replacement for reduced set-up time Suits standard tool posts and turret adapters Robust construction for production and workshop use FAQ Which inserts fit this boring bar? The S50U MTUNR accepts TNMG 1604 indexable inserts via the MTUN seat; this pairing is specified for secure clamping and repeatable cutting geometry. Is the bar right-hand or left-hand? This boring bar is configured for right-hand cutting, intended for standard clockwise tool movement when viewed from the spindle. What shank diameter is required for mounting? A 50 mm shank is specified; the bar is supplied in the S50U format to fit compatible holders and adapters. Can the S50U MTUNR be used for deep bores? With an overall length of 350 mm, the bar provides extended reach for deeper turning tasks, though stable clamping and correct overhang management are essential for optimal results. How does the cutting angle affect performance? The 93° cutting angle positions the insert for robust cutting engagement and predictable chip flow; this contributes to consistent material removal and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the S50U MWLNL design combined with a sturdy 63 mm diameter and 50 mm shank to secure stable internal turning, reduced vibration and consistent tool life; order or request advice via Metav Werkzeuge for reliable supply and application guidance. Teknik Makina S50U MWLNL boring bar — for WN-- 0804 inserts, left‑hand The S50U MWLNL boring bar is a left‑hand internal turning bar engineered for heavy‑duty workshop use with WN-- 0804 indexable inserts. S50U MWLNL hardened construction Left‑hand cutting direction Compatible with WN-- 0804 inserts 63 mm outer diameter, 350 mm overall length Stable performance for demanding internal turning The solid geometry of this boring bar delivers improved rigidity for internal machining: a 63 mm outer diameter and 50 mm shank combine to keep the tool stable under load, while a mass of 5.11 kg helps to damp vibration. Reduced chatter translates directly into longer tool life for insert edges and more consistent bore finishes. In practical terms, shops benefit from fewer rework cycles and a predictable process window when machining medium to large internal bores. Precise insert interface for repeatable results Designed for use with WN-- 0804 indexable inserts, the toolholder provides a defined seating geometry and a 95° cutting angle that supports controlled chip formation. The 65 mm cutting height ensures the insert sits at the correct centreline relative to the workpiece when used with suitable holders. Together these features enable fast insert changes and repeatable set‑ups, reducing downtime and simplifying tool inventory management for series production. Workshop reliability and straightforward integration With an overall length of 350 mm and robust construction from Teknik Cutting Tools, the bar is intended for conventional and CNC lathes equipped to accept a 50 mm shank. The left‑hand cutting direction is suitable for applications where counter‑rotation is required. The combination of clear measurements, standardised insert compatibility and a solid shank format makes installation and clamping straightforward, supporting a smooth transition from prototype to production runs while maintaining process stability. Contact Metav Werkzeuge for tailored technical advice and assured supply from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com for guidance on toolholder fitment and delivery options. Technical data SKU: K516TM Manufacturer: Teknik Makina ISO designation: S50U MWLNL Article designation: MWLN for WN-- indexable inserts Cutting direction: left Core measurements Outer diameter: 63 mm Shank diameter: 50 mm Cutting height: 65 mm Cutting angle: 95° Length overall: 350 mm Weight: 5.11 kg Suitable inserts: WN-- 0804 Clamping size: 08 Materials & special features Designed for indexable insert turning Left‑hand cutting geometry Robust shank for reduced vibration FAQ Which indexable inserts are compatible with this boring bar? The S50U MWLNL boring bar accepts WN-- 0804 indexable inserts; the seating and clamping geometry are matched to that insert family for secure fixation and repeatable positioning. Is the cutting direction left‑hand or right‑hand? This bar is manufactured with a left‑hand cutting direction, suitable for applications that require counter‑rotation relative to the workpiece. What clamping and holder size is required? Clamping requires a toolholder that accommodates a 50 mm shank; refer to the shank diameter and the clamping size 08 specification when selecting a suitable holder. For which bore sizes is the tool primarily intended? With a 63 mm outer diameter and 350 mm length overall, the tool is optimised for medium to large internal bores where increased rigidity and reduced vibration are necessary. Can the S50U MWLNL be used in CNC and manual lathes? Yes—provided the machine has a compatible toolpost or turret and a matching holder for the 50 mm shank, the S50U MWLNL (SKU K516TM) by Teknik Makina is suitable for both CNC and manual turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA, TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust toolholding, precise indexable-insert compatibility and extended reach for reliable deep boring. Benefit from stable performance with a 50 mm shank and the convenience of DCLN clamping for CN-- 1906 inserts — order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. K375TM boring bar (S50V DCLNR) — for CN-- 1906 indexable inserts, 50 mm shank K375TM boring bar designed for right-hand internal boring applications with DCLN-style clamping for CN-- 1906 indexable inserts, offering extended reach and rigid support for industrial turning operations 50 mm shank for robust toolholding 400 mm overall length for deep boring DCLN style for CN-- 1906 indexable inserts 95° cutting angle for stable cutting geometry Stable, rigid support that reduces vibration and improves productivity The K375TM boring bar features a 50 mm shank and a substantial mass (approx. 6.333 kg), which together deliver increased resistance to deflection during internal turning. Rigid toolholding limits chatter and allows for steadier cutting forces; the result is more consistent surface finish and extended insert life. The ISO designation S50V DCLNR denotes the holder form and helps workshop engineers match clamping interfaces precisely. For production environments where process stability and repeatable results are decisive, the combination of shank diameter, mass and holder geometry directly contributes to higher machining efficiency. Quick insert changes and predictable cutting behaviour for lower downtime The DCLN clamping geometry is tailored for CN-- 1906 indexable inserts, with a cutting height of 60 mm that aligns insert top faces reliably. Indexable inserts reduce non-cutting time: re-setting a seat is replaced by a simple index or swap, ensuring consistent tool geometry from change to change. The defined 95° cutting angle supports a stable cutting edge orientation that helps with chip formation and evacuation in many internal-facing turning tasks. This predictability supports faster setup and a measurable reduction in unplanned stoppages, which is valuable for continuous production runs. Extended reach and compact head diameter for deep boring tasks With a 400 mm overall length and a tool body diameter of 63 mm, the boring bar is configured for deep internal operations while maintaining a compact head profile where space is restricted. The right-hand cutting direction suits standard lathe set-ups and common turning cycles. Where long overhangs are unavoidable, the bar’s proportions and mass distribution help preserve cutting stability; this enables conservative increases in feed rates without sacrificing finish quality. Supplied through Metav’s quality-filtered distribution, the component is positioned for practical workshop integration and dependable stock availability. For tailored advice on machining strategies or to request this Teknik Cutting Tools K375TM boring bar via Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation and ordering support Technical data Article number: K375TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Type designation: S50V DCLNR Style: DCLN for CN-- indexable inserts Facts Shank diameter: 50 mm Cutting height: 60 mm Weight: 6.333 kg Cutting angle: 95° Diameter: 63 mm Overall length: 400 mm Special features Right-hand cutting direction Compatible with CN-- 1906 indexable inserts DCLN clamping geometry ISO designation S50V DCLNR Robust construction for deep boring applications FAQ What insert type fits this boring bar? The K375TM boring bar accepts CN-- 1906 indexable inserts in a DCLN clamping seat, designed for quick indexing and repeatable seating. What is the shank diameter and why does it matter? Shank diameter is 50 mm; a larger shank increases rigidity and reduces deflection, improving surface finish and tool life during internal turning. Is the boring bar suitable for deep internal machining? Yes, with a 400 mm overall length and a 63 mm head profile, the tool is configured for deep boring while maintaining stable cutting geometry. Which cutting direction does the tool use? The tool is manufactured for right-hand cutting, matching common lathe set-ups and standard turning cycles. How does the 95° cutting angle affect performance? The 95° cutting angle provides a stable edge orientation that assists chip formation and evacuation, contributing to consistent machining results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, insert-compatible tool that combines a 50 mm shank and a 450 mm overall length for reliable internal turning; the right-hand, 93° geometry and compatibility with KNUX 1604 inserts ensure efficient chip control and reduced setup time. Order the S50W CKUNR boring bar directly via Metav Werkzeuge or ask our consultants if needed. S50W CKUNR Boring Bar (CKUNR for KNUX Indexable Inserts) – 50 mm Shank, 450 mm Length | Teknik Makina The S50W CKUNR boring bar is a right-hand, indexable-insert toolholder designed for internal turning and boring with KNUX 1604 inserts, offering stable cutting at a 93° engagement angle. 50 mm shank for stable clamping Compatible with KNUX 1604 inserts Right-hand, 93° cutting geometry 450 mm overall length for extended reach Maximise material removal with proven insert compatibility This toolholder is engineered for throughput: the CKUNR interface accepts standard KNUX 1604 indexable inserts, which simplifies inventory and speeds up insert changes. With a defined 93° cutting angle, the geometry promotes predictable cutting forces and improved chip evacuation, translating into shorter cycle times and fewer reworks. The combination of standardised inserts and robust interface reduces setup complexity and supports high-volume turning applications where repeatable performance matters. Stable clamping and vibration resistance for precise bores A 50 mm shank and solid construction provide rigidity that directly benefits bore quality. With a 63 mm tool diameter and 60 mm cutting height, the toolholder minimises deflection during heavy cuts, helping to maintain concentricity and surface finish. The right-hand cutting direction is matched to conventional machine spindle rotations, ensuring reliable chip flow. These mechanical attributes make the bar suitable for demanding workshop environments where consistent tolerances are required. Ready for workshop integration and straightforward tool management At 450 mm overall length, the bar reaches deeper bores while the modest 0.408 kg weight keeps handling safe during changeovers. The ISO designation S50W CKUNR identifies the toolholder for CAM programming and tool lists, aiding process planners and purchasing. Using established insert formats reduces toolholder proliferation and supports a lean tooling strategy; this results in fewer stocked items and clearer maintenance processes. The outcome is a practical balance between reach, stiffness and compatibility for industrial turning tasks. For workshop-ready stability and insert compatibility choose the Teknik Makina S50W CKUNR boring bar—contact Metav Werkzeuge for technical advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: RK760TM Manufacturer: Teknik Makina Article designation: CKUNR for KNUX Indexable Inserts ISO designation: S50W CKUNR Facts Shank diameter: 50 mm Overall length: 450 mm Tool diameter: 63 mm Cutting height: 60 mm Weight: 0.408 kg Cutting angle: 93° Cutting direction: right ECLASS: 21180806 Special features Compatible with KNUX 1604 inserts Right-hand cutting geometry Designed for indexable-insert turning Standard ISO toolholder designation FAQ What inserts fit this toolholder? The S50W CKUNR boring bar is compatible with KNUX 1604 indexable inserts, allowing use of common grades for finishing or roughing. Is the bar suitable for deep internal turning? Yes, the 450 mm overall length and 50 mm shank provide reach with improved stiffness for deeper bores compared with shorter holders. Which cutting direction is required? This toolholder is configured for a right-hand cut, matching standard spindle rotation for conventional turning operations. How does the 93° cutting angle affect machining? The 93° engagement promotes controlled chip formation and stable cutting forces, which helps maintain bore accuracy and surface finish. Can this toolholder reduce tooling inventory? Using the CKUNR interface with KNUX 1604 inserts standardises inserts across multiple operations, simplifying stock management and changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of high rigidity and predictable chip control for consistent turning results; the combination of a 50 mm shaft, compatibility with DN-- 1506 indexable inserts and a stable 550 mm reach reduces vibration and rework. Order the tool directly via Metav Werkzeuge or ask our consultants for specification support. Boring bar S50X DDUNR (K417TM) — heavy-duty external boring bar, 50 mm shaft, DN-- 1506 compatible The Boring bar S50X DDUNR is engineered for demanding external turning applications where stability and reliable insert clamping determine dimensional repeatability and surface quality Right-hand cutting, robust construction 50 mm shaft diameter for high rigidity Compatible with DN-- 1506 indexable inserts 550 mm overall length, balanced weight High rigidity for improved accuracy and surface finish A robust toolbody delivers measurable advantages in routine turning operations: the combination of a 50 mm shaft and a 65 mm cutting height provides a stiff support that minimises deflection under heavy cut and improves dimensional repeatability. The substantial mass of 8.716 kg helps dampen vibration, which in turn reduces chatter and the need for secondary machining. For workshops aiming to tighten tolerances, this structural approach converts directly into fewer rejects and lower rework costs. Clear insert compatibility and optimised cutting geometry Designed for use with DN-- 1506 indexable inserts, the bar’s geometry supports consistent chip formation and evacuation. The 93° cutting angle is selected to balance cutting forces and edge strength, while right-hand cutting aligns with standard lathe setups. These characteristics make insert selection straightforward: matching the DN-- 1506 grade to the workpiece and speed profile results in predictable tool life and reliable surface quality. Explaining how geometry affects performance reduces specification uncertainty for production planning. Reach, handling and workshop integration for efficient setups With a 550 mm overall length and a main diameter of 63 mm, the bar offers extended reach for deeper bores or external overhangs while retaining the stiffness required for precise turning. The physical dimensions demand an appropriately rated holder and secure clamping; when the machine setup and fixture strategy are aligned to the bar’s size, cycle times remain consistent and tool change intervals become predictable. For complex setups, Metav’s technical resources can advise on optimal clamping and balance to maintain machining stability. For demanding turning tasks, discuss the Teknik Cutting Tools S50X DDUNR (K417TM) with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for precise specification support. Technical data Article number: K417TM Manufacturer: Teknik Makina Type designation: Boring bar Facts Shaft diameter: 50 mm Cutting height: 65 mm Weight: 8.716 kg Overall length: 550 mm Diameter: 63 mm Cutting angle: 93° Special features ISO designation: S50X DDUNR Compatible inserts: DN-- 1506 (indexable inserts) Cutting direction: Right-hand Suitable for DDUN insert clamping system SKU: K417TM FAQ Which inserts fit this boring bar? The S50X DDUNR is specified for DN-- 1506 indexable inserts; matching insert grades should be selected according to the workpiece material and cutting conditions. What is the shaft diameter and why does it matter? The 50 mm shaft provides the stiffness necessary to reduce deflection during heavy cuts, improving dimensional accuracy and surface finish with the S50X DDUNR. Is this tool intended for right-hand or left-hand turning? This tool is designed for right-hand cutting, which suits conventional lathe configurations and standard programming. How long is the boring bar and what does that mean for setup? The overall length is 550 mm; longer reach requires careful clamping and machine stability to maintain precision during extended overhangs. Can the S50X DDUNR be used for deep external boring? Yes, the combination of the bar’s stiffness, 63 mm diameter and extended reach makes it suitable for external boring tasks that require both reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable cutting performance, straightforward insert compatibility and integrated coolant management for reliable angular machining. Order the component directly via Metav Werkzeuge or consult our advisors for specification matching. Corner cutting head T388-1TM – 63 mm diameter, internal coolant, for LNMX 1006 indexable inserts by Teknik Makina Corner cutting head designed for LNMX 1006 indexable inserts, intended for precise angular machining and reliable tool changes in turning and light milling operations. 63 mm diameter for stable engagement Internal coolant for improved chip evacuation Compatible with LNMX 1006 Korloy indexable inserts Greater cutting stability for angular operations The Corner cutting head delivers consistent engagement at a defined 90° cutting angle, supported by a 63 mm body diameter that reduces deflection during entry and exit cuts. The combination of a robust geometry and six cutting edges enables steady chip formation and predictable tool behaviour, which directly improves surface finish and reduces rework. The integrated internal coolant directs fluid to the cutting zone, assisting heat control and chip evacuation; this reduces flank wear and extends the service intervals of indexable inserts without complicating cycle planning. Faster retooling and inventory clarity The head is engineered for straightforward compatibility with LNMX 1006 indexable inserts from Korloy, simplifying spare-part lists and enabling quicker insert changes on the shop floor. A standard T8 Torx fixation with M3x7 screws ensures reproducible clamping torque and repeatable seating of the insert pockets. These features shorten downtimes during regrip and changeovers, making tool management more economical and predictable for production or maintenance teams that aim to keep throughput steady. Durable design that supports operational efficiency At a length of 45 mm and a mass of 0.495 kg, the indexable head balances rigidity with manageable tool overhang, suitable for many bench and turret applications where angular cutting is required. The construction accommodates even wear across the six available cutting positions, so insert rotation and replacement are efficient and cost-conscious. Combined with the internal coolant channeling, the result is a component that lowers total machining cost per part while maintaining repeatable dimensional results in series production. Discuss Teknik Makina tooling compatibility and delivery options with Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to ensure the T388-1TM fits the intended application and inventory strategy Technical Data Article number: T388-1TM Eclass: 21181015 Label: 63mm Eckmesserkopf LNMX 1006 L45mm with internal coolant Facts Diameter: 63 mm Overall length: 45 mm Weight: 0.495 kg Cutting angle: 90° Cutting edges: 6 Special features Internal coolant Compatible with LNMX 1006 indexable inserts Suitable for Korloy insert manufacturer Torx screw: M3x7, Torx key: T8 Manufacturer: Teknik Makina FAQ What insert type fits this head? The corner cutting head accepts LNMX 1006 indexable inserts; compatibility with Korloy-manufactured inserts is specified for the T388-1TM design. Does the head provide coolant supply to the insert tip? Yes, the T388-1TM includes internal coolant routing to aid chip evacuation and temperature control at the cutting edge. How many usable cutting positions are available? The indexable head is designed with six cutting edges, allowing for multiple indexings before an insert change is required. Is the clamping hardware standardised? Clamping uses a Torx screw (M3x7) operated with a T8 key to ensure consistent torque and secure seating of the insert. What are the primary benefits in production use? The tool head offers stable engagement through its 63 mm diameter and 90° geometry, combined with coolant support and simple insert changes for reduced downtime and improved process reliability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 90° cutting geometry, firm 22 mm shank interface and Sandvik insert compatibility for dependable shoulder turning and facing operations; benefit from quick insert changes and consistent repeatability. Order directly via Metav Werkzeuge or consult our specialists for selection guidance. Corner tool head — square turning head for R390-11T3 indexable inserts by Teknik Makina, 90° cutting geometry Corner tool head designed as a compact turning head for precise shoulder cuts and facing, compatible with R390-11T3 indexable inserts and engineered for stable clamping in standard turret systems For R390-11T3 indexable inserts 90° cutting angle for accurate shoulders 22 mm shank diameter for stable clamping Torx M2.5x7 screw, T8 key required Rigidity and geometry for consistent precision The compact turning head delivers a 90° cutting angle that simplifies shoulder turning and facing operations by providing a defined contact geometry. Thanks to the 22 mm tool interface and a diameter of 63 mm, the design reduces deflection and vibration during cuts, improving surface finish and repeatability. This structural stability translates into fewer reworks and a higher first-pass yield for batch turning tasks, while the inclusion of a standardized fixing screw ensures consistent clamping force and predictable tool behaviour on the machine. Fast compatibility and straightforward setup Engineered for use with R390-11T3 indexable inserts, the head accepts widely available Sandvik insert formats, enabling quick insert changes and easy stock management. The supplied Torx fastening (M2.5x7) and T8 key requirement make insert replacement and maintenance straightforward on the shop floor, reducing downtime. Clear mechanical compatibility with common turret systems means retrofitting is uncomplicated; the result is a rapid return to production and fewer setup iterations when switching between operations. Workshop resilience and practical benefits At just over 0.5 kg and with a total length of 40 mm, the unit balances compactness with robustness for everyday workshop use. The construction prioritises stable clamping and long-term durability to withstand standard turning cycles. Compatibility with Sandvik inserts supports flexible tool management and keeps toolholding costs predictable. For production environments seeking reliable, no-nonsense tooling, this turning head offers a technically sound option that supports consistent part quality and straightforward inventory control. For reliable high-precision turning choose Teknik Makina’s corner tool head (T579TM) — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich. Technical data Article number: T579TM Manufacturer: Teknik Makina Compatible inserts: R390-11T3 (Sandvik) Core measurements Diameter: 63 mm Total length: 40 mm Shank diameter / clamping interface: 22 mm Weight: 0.503 kg Cutting edges: 7 Cutting angle: 90° Special features and compatibility Torx screw: M2.5x7 Torx key: T8 Designed for R390-11T3 indexable inserts Compatible with Sandvik insert systems FAQ How is the tool head fixed in the turret? The turning head locates on a 22 mm interface and is secured with the Torx M2.5x7 screw; follow machine manufacturer clamping practices to ensure correct seating. The T579TM designation identifies the specific head model for ordering and replacement. Which inserts fit this turning head? This head is built for R390-11T3 indexable inserts, compatible with Sandvik insert geometries, allowing use of common grades and chipbreakers suited to the application. What operations suit the 90° geometry? A 90° cutting angle is ideal for shoulder turning and facing where a square shoulder and precise axial positioning are required; the geometry helps produce consistent fillet transitions and nominal faces. How does the shank diameter affect performance? The 22 mm shank diameter increases rigidity at the tool-to-holder interface, reducing deflection under cutting loads and improving surface finish and dimensional stability during medium-duty turning cycles. What maintenance is recommended for the screw and clamping area? Regular inspection and cleaning of the screw seat and mating surfaces is advised; tighten using the T8 key to the workshop’s prescribed torque practice and replace the M2.5x7 screw if thread damage is observed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 90° cutting angle, internal coolant and compatibility with WNMU 0806 indexable inserts for precise, reliable turning results; purchase directly via Metav Werkzeuge or consult our specialists for integration advice. Angle cutting head for WNMU 0806 indexable inserts — 63 mm, internal coolant (Teknik Makina) An angle cutting head designed for 90° turning tasks, compatible with WNMU 0806 indexable inserts and optimised for coolant-fed operations in industrial turning applications. 63 mm diameter for stable turning operations Internal coolant for improved chip evacuation Compatible with WNMU 0806 (Kyocera) inserts Four cutting edges for extended tool life Precision turning with a reliable 90° geometry The angle cutting head delivers a true 90° cutting angle, which ensures predictable tool engagement and consistent tool path control on facing and shoulder operations. The defined geometry reduces radial runout and enables repeatable manufacturing tolerances, so cycle times become more consistent and setups require less rework. For users unfamiliar with angle-head terminology: a 90° cutting angle means the cutting edge meets the workpiece perpendicularly, improving surface finish and simplifying fixture alignment. This stability is particularly beneficial when machining components where perpendicular faces and clean shoulders are required. Integrated coolant to reduce thermal distortion and interruptions This tool features internal coolant, channelled directly to the insert pocket, which actively cools the cutting zone and helps evacuate chips from the cutting edge. The result is reduced cutting temperatures, lower risk of built-up edge and extended insert life. From a productivity standpoint, coolant-fed toolholders typically allow higher feed rates and longer uninterrupted running periods, translating into fewer tool changes and less downtime. Describing the technical effect plainly: coolant delivered to the insert contact zone modulates heat and removes chips, which preserves the tip geometry and reduces the need for premature index changes. Wide compatibility minimises inventory complexity Compatibility with WNMU 0806 indexable inserts — specifically those from Kyocera — means the holder integrates with widely stocked carbide inserts, easing procurement and standardising tooling across machines. The acceptance of the common insert format supports both roughing and finishing grades, so the same holder can be adapted for diverse tasks by changing the insert grade rather than the entire toolhead. This approach lowers inventory costs and accelerates tooling decisions on the shop floor, while providing flexibility for varied materials and cutting conditions. Practical features that simplify workshop handling Designed with four usable cutting edges and secured using an M5x12 torx screw (Torx key T20), the holder balances rapid serviceability with secure clamping. The compact overall length and a 63 mm head diameter offer a good balance between rigidity and accessibility in confined setups. Weighing 0.556 kg and supplied with a 22 mm shank diameter, the component fits common turret and toolpost systems without excessive overhang. These practical dimensions reduce vibration potential and make the holder a pragmatic choice for mixed-production environments where setup speed and machine stability matter. For technical queries, compatibility checks or order arrangements for Teknik Makina’s T544-1TM angle cutting head, contact Metav Werkzeuge in Emmerich by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss delivery and application suitability Technical data SKU: T544-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Core specifications Diameter: 63 mm Overall length: 46 mm Shank diameter: 22 mm Weight: 0.556 kg Cutting angle: 90° Number of cutting edges: 4 Features & compatibility Internal coolant Compatible with WNMU 0806 indexable inserts (Kyocera) Torx key: T20 Torx screw: M5x12 Product type: Angle cutting head FAQ What insert type fits this holder? The holder accepts WNMU 0806 indexable inserts; Kyocera WNMU 0806 grades are compatible with the T544-1TM. Is the coolant supply internal or external? Coolant is delivered internally to the insert pocket, providing cooling and chip evacuation directly at the cutting edge. Which shank diameter is required for installation? The toolhead uses a 22 mm shank diameter suitable for compatible turrets and toolposts. How many times can an insert be indexed? An indexable WNMU 0806 insert provides four cutting edges before replacement or regrinding is required. What fastening hardware is used for the insert? Clamping is achieved with an M5x12 Torx screw tightened with a T20 key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Specifications: Order Number: TKC301TM Item: T-Grove Holder usable with MGM 3C Indexable Inserts of Korloy Brand: Teknik Makina Metric Information: Diameter: 63mm Cutting Edges: 2 Weight: 0.543kg Total length: 120mm Cutting Height: 3mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com