Gibt es einen Hahn und Kolb Online Shop?

Technical Specifications: Order Number: VT517TM Item: Extension for Modular End Mill Holder usable with Brand: Teknik Makina Quantitative Specifications: Weight: 0.741kg Total length: 200mm Thread: M12 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a compact solution for reliable external turning: the clamping holder combines secure workpiece fixation with straightforward integration into existing lathe tool setups. Order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder for external turning (RP104TM) by Teknik Makina The Clamping holder is a toolholder intended for external turning applications, designed to provide stable workpiece fixation and consistent machining performance across general metalworking tasks. External turning toolholder Secure workpiece clamping Industrial-grade compatibility Increased process reliability for external turning The RP104TM is conceived to support external turning operations with an emphasis on stable cutting conditions and repeatable results. By ensuring secure clamping of the workpiece, the holder reduces vibration and positional deviation during machining. For production environments this translates into more predictable surface finishes and fewer rework cycles, helping to maintain throughput without compromising component tolerances. Consistent clamping for repeatable outcomes A well-engineered toolholder keeps the cutting edge positioned reliably relative to the workpiece. This item delivers consistent fixation that supports repeatability in serial production and one-off jobs alike. For operators and planners, that means less time spent on re-adjustment and more consistent dimensional accuracy from part to part, which is particularly relevant where tight process control is required. Simple adaptation to standard turning toolstocks Designed for integration with common lathe toolstocks, the holder facilitates straightforward replacement or upgrades within existing setups. The uncomplicated interface allows for quick mounting and secure seating in the tool post, helping to streamline changeovers. As a component intended for routine workshop use, it aids in maintaining efficient machine utilisation throughout varied job cycles. Practical suitability for general metalworking While compact in concept, the clamping holder suits a broad range of turning tasks across typical metalworking materials. It is particularly useful in applications where a robust, stable clamping solution is needed to withstand normal cutting forces during external turning. The design focus remains on dependable workholding rather than on material-specific processes, so the holder complements versatile workshop needs. Maintenance and service considerations The straightforward construction favours ease of inspection and upkeep, allowing maintenance staff to verify clamping integrity with minimal downtime. Regular checks of fastening interfaces and seating surfaces will preserve performance and extend service intervals. Where replacement parts are required, sourcing through established suppliers ensures continuity of operation. Who benefits from this toolholder The clamping holder is well suited to machine shops, production lines and maintenance departments seeking a reliable, no-frills workholding option for external turning. Engineers specifying toolholders for standard turning processes will value the holder’s contribution to process stability and consistent part quality without the need for bespoke solutions. Contact Metav Werkzeuge for detailed application advice and to source the Teknik Makina RP104TM clamping holder for reliable external turning performance in your workshop Technical data Article number: RP104TM Product: Clamping holder Type: External turning Brand: Teknik Makina eClass: 21181004 Facts eClass: 21181004 Versions / Special features Application: External turning Category: Clamping holder Label: Klemmhalter Manufacturer: Teknik Makina FAQ What is the primary application of this clamping holder? The clamping holder is intended for external turning operations and provides fixed workpiece support during lathe machining. Which brand manufactures this toolholder and what is the SKU? The holder is supplied by Teknik Makina and is listed under the SKU RP104TM. Can this holder be integrated into existing lathe toolposts? The holder is designed for straightforward integration with standard turning toolstocks to facilitate quick mounting and secure seating. How does this toolholder affect machining consistency? By maintaining secure workpiece fixation, the holder contributes to reduced vibration and improved repeatability in external turning processes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a sturdy clamping solution optimised for external turning: secure tool retention and consistent process stability ensure smoother production cycles. Order the clamping holder directly via Metav Werkzeuge or consult the technical team for integration advice. Klemmhalter — External turning clamping holder by Teknik Makina The Klemmhalter is a precision clamping holder intended for stable tool retention in external turning operations, suitable for professional workshop and industrial lathe applications. Precision clamping holder for external turning Robust construction by Teknik Makina Identified by SKU RP102TM Reliable clamping for consistent turning results A stable clamping system is fundamental for repeatable machining outcomes. The Klemmhalter delivers controlled tool retention that reduces micro-movements during cutting, which in turn supports a steady surface finish and fewer process interruptions. By securing the cutting insert reliably, the holder contributes to improved cycle-time stability and predictable part quality, aligning with the rational need for efficient, reproducible production. Streamlined handling that fits workshop routines Designed for pragmatic workshop use, the RP102TM toolholder keeps changeover and set-up straightforward, helping to reduce non-productive time. The holder’s design emphasises fast, repeatable seating of the cutting edge and reliable mechanical clamping, which supports steady tool life and lowers the incidence of unplanned adjustments. For production planners, this translates into smoother operation sequencing and easier integration into existing turning stations. Proven supply chain and service continuity for peace of mind Manufactured by Teknik Makina and distributed through Metav Werkzeuge, this clamping holder is backed by a supplier network focused on dependable delivery and technical backing. Metav’s role as a European distribution centre acts as a quality filter for workshop purchases, combining experienced product selection with transparent order handling. The result is a trustworthy procurement route that supports long-term workshop reliability and operational continuity. For specification guidance or procurement of the Teknik Makina RP102TM clamping holder, contact Metav Werkzeuge for tailored advice and swift supply arrangements at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: RP102TM Product type: Klemmhalter Eclass: 21181004 Manufacturer: Teknik Makina UID: RP102TM Facts Classification code: 21181004 SKU identifier: RP102TM Special features Application: External turning Category path: Zerspanen › Klemmhalter Brand: Teknik Makina FAQ What is the primary application for this holder? The clamping holder is designed for external turning operations; the RP102TM supports secure tool retention during lathe-based turning processes. Which manufacturer produces this toolholder? Teknik Makina manufactures the clamping holder; the model is supplied and supported through Metav Werkzeuge. How is the RP102TM identified for ordering? Orders and enquiries can reference the SKU RP102TM to ensure the correct clamping holder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The clamping holder RP100TM delivers secure clamping for external turning operations and straightforward identification via SKU RP100TM; order the device directly through Metav Werkzeuge or contact our consultants for application advice. Clamping holder RP100TM — External turning clamping holder by Teknik Makina The Clamping holder RP100TM is a compact clamping solution intended for external turning applications in industrial machining, offering reliable tool fixation for turning processes. Clamping holder «RP100TM» by Teknik Makina For external turning operations Designed for secure tool clamping Improved process stability from secure clamping Stable cutting conditions start with reliable tool fixation. The RP100TM is designed as a clamping device for external turning, ensuring consistent engagement between insert and workpiece. By reducing micro-movements at the tool tip, the holder promotes repeatable turning results and more predictable tool life. This rational advantage supports efficient cycle planning and reduces scrap rates in batch production, making the component a practical choice for machine shops focusing on throughput and quality. Easy integration into turning tool chains Integration into existing turning setups is a decisive factor for workshop efficiency. The clamping holder is presented as a straightforward element for external turning tool arrangements and is compatible with standard mounting practices in clamping technology. Its clear identification via SKU RP100TM and the association with Teknik Makina simplify procurement and tool-room inventory management. This functional clarity reduces administrative friction and helps maintain production continuity across shifts. Workshop support and supply assurance from Metav Sourcing precision tooling is more than the product itself; supply reliability and expert support matter equally. Metav Werkzeuge acts as a quality filter and distribution hub for the European market, combining broad product availability with targeted advice. With a large product range and an experienced consultant network, Metav enables straightforward procurement and technical clarification, helping workshops maintain uptime and meet delivery commitments with confidence. Contact Metav Werkzeuge for application-specific recommendations on the Teknik Makina RP100TM or request further technical data by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: RP100TM Manufacturer: Teknik Makina Product type: Clamping holder Facts ECLASS: 21181004 Special features Application: External turning Category: Machining > Clamping holder Label: Clamping holder FAQ What is the primary application of this clamping holder? The RP100TM clamping holder from Teknik Makina is intended for external turning operations in metalworking, providing secure tool fixation for turning processes. Which manufacturer produces the RP100TM? The RP100TM is supplied by Teknik Makina and listed with SKU RP100TM for easy identification during procurement. Can the clamping holder be ordered through Metav? Yes, the RP100TM is available via Metav Werkzeuge and its consultants can advise on compatibility and supply. How does the RP100TM support workshop efficiency? By providing stable clamping for external turning, the RP100TM reduces variability at the tool tip and aids in achieving repeatable turning results, supporting reliable production planning. Is technical documentation available for the RP100TM? Technical details and procurement information for the RP100TM can be requested through Metav Werkzeuge, which offers product guidance and distribution for Teknik Makina items. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact replacement that combines precise M5-thread compatibility with reliable, repeatable contact force for measuring instruments; order the spring directly via Metav Werkzeuge or consult the technical team for fitment confirmation. Spring BY041TM — Replacement spring for precision calipers, M5 thread (Teknik Makina) The Spring BY041TM is a compact replacement spring designed for precision calipers with an M5 threaded fitting, intended for instrument maintenance and workshop repair. Compatible with M5 threaded calipers Compact, space-saving design Simple screw-in replacement part Lightweight at 0.1 kg Consistent contact force for reliable readings A small component often determines measurement quality. The BY041TM spring provides a consistent contact force at the caliper jaw interface, which helps to reduce measurement scatter and supports repeatability in routine checks. For technicians and calibration staff, this stability translates into fewer re-measurements and a clearer assessment of part conformity. The thread compatibility ensures the coil seats correctly in standard M5 fittings used on many precision instruments. Straightforward replacement to reduce instrument downtime Maintenance procedures are simplified by the spring's screw-in arrangement for M5-threaded fittings. The replacement coil has been conceived for rapid installation, minimising workshop stoppage and lowering the effort required during on-site servicing of measuring tools. The easy replacement characteristic assists service routines, and the reliable fit reduces the risk of loosening or misalignment after reassembly. Tailored for workshops, labs and repair specialists Designed with routine instrument upkeep in mind, this spring is suited to calibration labs, inspection benches and repair workshops that maintain calipers and small measuring devices. The compact component supports a practical spare-parts strategy: keeping a small stock reduces lead times for repairs and preserves measurement capability across shifts. Support from Metav’s distribution and quality assurance in Emmerich underpins supply reliability and consistent availability. For application advice or to request the BY041TM spring for precision calipers, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment and order details. Technical data Article number: BY041TM eClass: 21189290 Weight: 0.1 kg Facts Thread compatibility: M5 Intended use: replacement spring for precision calipers Special features Compact design for space-restricted assemblies Simple screw-in installation for fast servicing FAQ What thread size does this spring fit? The BY041TM spring is specified for an M5 threaded fitting, suitable for many precision calipers and related measuring instruments. What is the weight of the BY041TM spring? The replacement spring BY041TM has a weight of 0.1 kg. Which users or environments benefit from this spring? Calibration laboratories, workshop repair benches and service technicians commonly use the BY041TM spring when maintaining or repairing precision calipers from Teknik Makina and similar manufacturers. How does the spring affect measurement quality? By providing a stable contact force, the BY041TM spring reduces variability at the jaw interface and helps to improve repeatability during comparative measurements. Is the material specified for the BY041TM spring? Material information is not specified in the provided product data for the BY041TM spring Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a purpose-built grooving holder that fits the clamping-holder category and is offered by Teknik Makina; the RP114TM delivers straightforward integration into workshop tooling stocks and reliable positioning for grooving tasks. Order or request advice directly via Metav Werkzeuge for a seamless supply and selection process. Grooving Holder — Stechklemmhalter for secure grooving clamping (Teknik Makina) Grooving Holder designed for secure clamping in grooving applications and integration into standard clamping-holder setups Secure clamping for grooving applications Fits the clamping-holder category Model RP114TM by Teknik Makina Reliable clamping for consistent grooving results The grooving holder provides a stable interface between tool and machine, aimed at repeatable positioning for grooving operations. With a focus on secure clamping and predictable alignment, the design reduces the need for frequent readjustment and supports steady cutting conditions. This leads to fewer stoppages for re-clamping and contributes to improved process efficiency on the shop floor. Integrates with existing clamping-holder arrangements Made to be used within the clamping-holder family, the unit is suitable where consistent tool hold and quick changeover are priorities. Its compatibility with common holder arrangements supports flexible tooling layouts and helps to keep set-up times low. The clear category alignment simplifies procurement and inventory management for workshops and small-series production. Practical benefits for workshop and small-batch production By focusing on robust clamping and straightforward handling, this holder helps maintain machining accuracy over repeated cycles. The combination of precise seating and a reliable interface minimises vibration transfer and supports better surface finishes in grooving tasks. For operations that value consistent results and predictable tool behaviour, the RP114TM represents a sensible component choice. Selection guidance and maintenance considerations Choose the RP114TM when dedicated grooving clamping is required and when alignment repeatability is a priority. Routine visual checks and correct installation ensure continued performance; in standard industrial practice, correct mounting and torqueing maintain positional accuracy and extend service life. For tailored advice on fitment and system compatibility, technical consultation is recommended. For expert guidance on selecting the right Teknik Makina Grooving Holder RP114TM and to secure dependable tooling supply from Metav Werkzeuge, contact our consultants in Emmerich by e‑mail or phone and benefit from our decades of metrology and tooling expertise Technical Data Article number: RP114TM Manufacturer: Teknik Cutting Tools Product type: Grooving holder Facts eClass: 21181005 Special features Category: Klemmhalter (Clamping holders) Label: Stechklemmhalter Intended application: Grooving operations FAQ What is the primary application of this grooving holder? The grooving holder RP114TM is intended for secure clamping in grooving operations within clamping-holder setups and supports repeatable positioning. Is the RP114TM compatible with standard clamping-holder arrangements? Yes, the RP114TM by Teknik Makina is designed to integrate into common clamping-holder configurations used in workshops. How does this holder help improve machining consistency? Stable clamping and precise seating from the holder reduce vibration and positional variation, supporting consistent groove geometry and surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a purpose-built grooving holder that provides secure clamping and clear identification for tool management; its compact design supports efficient grooving operations while the SKU RP110TM ensures straightforward stock control. Order through Metav Werkzeuge or consult their advisors for fitment and integration. Grooving holder RP110TM — compact grooving clamping solution by Teknik Makina Grooving holder RP110TM is a compact clamping device designed for precision grooving applications in machining environments Robust clamping for grooving operations Compact design for tight tool setups Clear identification: SKU RP110TM Reliable clamping for precise grooving A dedicated grooving clamping device simplifies the task of creating consistent grooves across workpieces. The grooving holder is engineered to provide repeatable positioning and secure fixing during machining, reducing setup variability and downtime. The clear SKU designation, RP110TM, supports inventory control and traceability, so workshop planners can allocate tooling with confidence and maintain consistent process quality. Streamlined workflow and tool management Integrating this clamping solution into an existing toolpost or turret simplifies changeovers and keeps machining cycles efficient. With its compact footprint, the holder enables closer tool spacing and supports denser tool layouts on the machine, which can shorten non-cutting times. Clear labelling and standardised identification aid workshop logistics, making replenishment and routine checks faster and more reliable for production teams. Durable sourcing and practical shop-floor benefits Sourcing the grooving holder from a recognised supplier such as Teknik Makina and distributing via Metav brings logistical reliability to the workshop. Centralised procurement through Metav reduces administrative overhead and ensures consistent supply. For engineers and workshop managers seeking predictable availability and straightforward part identification, this clamping solution supports continuity of production and measurable process control. Contact Metav Werkzeuge for a practical assessment of the RP110TM grooving holder and a recommendation for integration into the current tool setup Technical data SKU: RP110TM Article designation: Grooving holder Manufacturer: Teknik Makina EClass: 21181005 Facts No dimensional data supplied No weight data supplied Special features Intended use: grooving operations Category: clamping holders (machining) Clear identification for tool management FAQ What applications is this holder suited to? The RP110TM grooving holder is intended for grooving operations in general machining and toolpost setups where secure clamping and repeatable positioning are required. Which machines is the holder compatible with? Compatibility depends on the machine tool’s toolpost or turret and the clamping arrangement; the RP110TM is designed as a standard grooving clamping device for typical machining setups. Can the grooving holder be used with different insert types? Insert compatibility is determined by the toolhead and insert geometry; the grooving holder provides the clamping platform, while insert selection must match the groove geometry and cutting parameters. How is the product identified in inventory? This grooving holder is identified by the SKU RP110TM and its designation as a grooving holder, which simplifies tracking and stock management. Is technical specification data available for load or dimensions? The supplied product information does not include dimensional or load specifications; for detailed mechanical data, confirmation of machine interface and application specifics is recommended Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of reliable grooving clamping and simplified procurement: the RP112TM Stechklemmhalter from Teknik Cutting Tools provides stable tool holding for grooving operations and clear identification for ordering. Buy directly through Metav Werkzeuge or consult our specialists for suitability in specific turning setups. Stechklemmhalter RP112TM — Grooving holder with secure clamping Stechklemmhalter is a grooving clamping holder engineered for secure tool holding in industrial turning and grooving applications. Precision clamping for grooving operations Stable clamping geometry Orderable under SKU RP112TM Maximise machining reliability with consistent clamping A clamping holder is central to consistent grooving processes: the RP112TM focuses on precision clamping to reduce tool movement and vibration during cuts. Stable tool retention results in more consistent groove profiles and improved surface quality. For workshops that prioritise repeatable results, a dedicated grooving holder contributes directly to process predictability and fewer reworks. Straightforward integration into existing workshop toolsets The RP112TM is presented as a purpose-built grooving solution that eases integration into common turning set-ups. With a clear SKU for procurement and a design intended for routine mounting, this holder supports organised tooling inventories and fast changeovers. When paired with established toolposts, a correctly mounted holder shortens setup time and helps maintain regular production cycles. Enhanced productivity and repeatability on the shop floor Stable clamping geometry translates into operational gains: fewer interruptions, steadier cutting conditions and improved cycle consistency. Such benefits are particularly relevant in batch production or repetitive grooving tasks, where cumulative time savings and reduced scrap add measurable value. The holder contributes to overall process efficiency by securing the cutting edge in a defined position for repeated passes. Procurement confidence and workshop support from an established partner Sourcing the RP112TM via Metav brings the advantage of a supplier with deep sector experience and a broad product portfolio. Metav’s position as a reliable distributor ensures transparent order handling and steady supply for workshop needs. With more than 48,000 customers trusting Metav’s range, buyers gain the reassurance of a quality‑focused supply chain for their clamping and workholding requirements. For procurement or technical clarification on the Teknik Cutting Tools Stechklemmhalter RP112TM, contact Metav Werkzeuge for availability and order support via info@metav-werkzeuge.com or phone +49 2822 7131930. Technical data SKU: RP112TM Product type: Stechklemmhalter eClass: 21181005 Facts Category: Klemmhalter (clamping holders) Application area: Grooving Special features Intended use: grooving workholding Manufacturer: Teknik Cutting Tools Identifier: RP112TM FAQ What is the primary use of this holder? The Stechklemmhalter RP112TM is intended for grooving applications and secures the cutting tool for consistent groove formation. Is the RP112TM suitable for production turning? Yes, the RP112TM is designed as a grooving clamping holder to support repetitive turning and grooving tasks with stable tool retention. How is the product identified when ordering? Order the grooving holder under SKU RP112TM; the designation refers to the Teknik Cutting Tools grooving clamping holder. Does this holder improve repeatability in batch work? By ensuring stable clamping geometry, the RP112TM supports repeatable tool positions and consistent groove profiles across multiple workpieces. Where can more technical information be obtained? Technical queries relating to the Stechklemmhalter RP112TM can be addressed through Metav Werkzeuge; they provide detailed product selection and procurement guidance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure insert retention and clear identification ensure consistent grooving performance; suitable for standard clamping arrangements, the holder streamlines setup and reduces downtime. Order the Stechklemmhalter RP116TM directly via Metav Werkzeuge or ask our consultants for compatibility information. Stechklemmhalter RP116TM — grooving holder for secure insert clamping by Teknik Makina A Stechklemmhalter designed for reliable groove and parting operations in turning applications Grooving holder for precision insert clamping Clear identification — SKU RP116TM Suited for standard clamping systems Manufactured by Teknik Makina Stable clamping for predictable machining results A purpose-built grooving holder provides the fundamental advantage of consistent insert clamping, which translates into steady cutting conditions and fewer unscheduled interruptions. By maintaining a firm grip on the cutting insert, the toolholder reduces vibration and tool movement; this improves surface finish and helps preserve insert life. For workshops seeking repeatability across batches, a well‑matched clamping solution contributes directly to process stability and predictable cycle times. Streamlined integration into workshop routines Identification and compatibility are central to efficient tool management. The clear SKU RP116TM and the designation as a grooving holder make procurement and inventory tracking straightforward, while the holder’s design concept aligns with standard lathe toolposts and insert geometries. Explaining technical terms: indexable inserts are replaceable cutting tips that permit quick tool refresh without resetting the entire holder — this reduces setup time and keeps machine utilisation high. Such integration supports shorter changeovers and smoother production planning. Practical benefits for production and serviceability Choosing a dedicated grooving clamping solution reduces adjustment effort at the machine and simplifies maintenance routines. The compact nature of these holders typically allows for quick replacement of worn inserts without elaborate dismantling, preserving operator time and lowering the risk of setup errors. When paired with a transparent supplier relationship, such components become part of a broader supply-chain reliability that benefits both small workshops and industrial production lines seeking consistent throughput and traceable tool supply. Contact Metav Werkzeuge for availability and technical matching of Teknik Makina grooving holders; enquiries by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 will be handled by our specialists Technical Data Article number: RP116TM Product type: Grooving holder eClass: 21181005 Manufacturer: Teknik Makina Facts SKU: RP116TM E‑class code: 21181005 Category ID: 66743c8c3c0da73acbea80b2 Special features Category path: Zerspanen → Klemmhalter Label: Stechklemmhalter UID: RP116TM FAQ What operations is this holder intended for? The Stechklemmhalter RP116TM is intended for grooving and parting operations in turning processes, where secure insert clamping is required. Which inserts fit the holder? Insert compatibility depends on the insert geometry and size; the holder is designed for standard grooving/indexable inserts commonly used in lathe operations. Can the holder be used with different toolposts? The holder is suitable for integration with standard lathe toolposts, though final fitment should be checked against the specific machine setup. How does this holder affect tool life and surface finish? By ensuring consistent clamping and reducing vibration, the holder supports longer insert life and more consistent surface finish across identical parts. Where can detailed technical compatibility be obtained? Detailed compatibility and dimensional data are available from Metav Werkzeuge; contact info@metav-werkzeuge.com for specification requests. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The Stechklemmhalter RP118TM offers a practical grooving clamping solution with straightforward identification (SKU RP118TM) and industrial-grade manufacture by Teknik Makina. Take advantage of clear procurement and a tool designed for standard grooving tasks — order the RP118TM directly via Metav Werkzeuge or consult Metav's specialists for integration advice. Stechklemmhalter RP118TM — Grooving holder from Teknik Makina, for secure clamping A Stechklemmhalter that serves as a dedicated grooving clamping tool for standard turning and grooving scenarios. Grooving holder for secure clamping Clear ordering via SKU RP118TM Manufactured by Teknik Makina Category: Klemmhalter Consistent clamping that stabilises grooving cycles The grooving holder is engineered to provide a stable interface between the tool and the workpiece, reducing variances during cut-off and grooving operations. With a focus on mechanical clamping rather than ancillary features, this holder supports repeatable tool positioning and contributes to consistent groove geometry. The RP118TM designation simplifies ordering and inventory management, while the basic clamping concept is suitable for routine workshop use where dependable mechanical performance is required. Bold design elements reduce setup ambiguity and promote reliable process results. Designed for straightforward workshop integration Workshops benefit from a concise tool description and an identified SKU that eases procurement and stock control. The RP118TM fits within the general class of grooving clamping tools and is listed under the Klemmhalter category, which aids sourcing teams when consolidating tooling assortments. Clear labelling and product classification support rapid identification in procurement systems and reduce administrative friction in buying or replacing holders on the shop floor. This practical approach supports efficient logistics and planning without unnecessary complexity. Procurement reliability and supply-chain confidence Sourcing from an established supplier brings advantages beyond the single part. Teknik Makina provides the brand origin for the holder, and distribution via Metav creates a localised supply channel for European buyers. Metav's track record, including a broad product range and long-standing customer relationships, underpins predictable delivery and dependable availability for industrial requirements. That reliability helps production planners maintain stock levels and reduces the risk of unscheduled downtime caused by missing clamping components. Typical applications and specification guidance The primary role of this grooving clamping device is the secure holding of grooving tools during turning and related metalcutting tasks. As product data for specific mounting dimensions and insert compatibility is not provided in the basic listing, selection should be made in context with the lathe tool post and the toolholder interface used in the workshop. The product is categorised for grooving and clamping applications and is suitable wherever standard grooving holders are required; for exact fitment and geometric parameters, consult the detailed technical documentation or the supplier's product sheet. For procurement and integration of the Teknik Makina RP118TM, rely on Metav Werkzeuge for streamlined ordering and technical consultation — contact Metav Werkzeuge to place an order or discuss application specifics. Technical Data Article number: RP118TM Product: Stechklemmhalter Product type: Grooving holder Manufacturer: Teknik Makina Facts eClass: 21181005 SKU: RP118TM Special features Label: Stechklemmhalter English designation: Grooving Holders Category path: Zerspanen > Klemmhalter Brand: Teknik Makina FAQ What is the primary use of this grooving holder? The grooving holder RP118TM is intended for secure clamping in grooving and related turning operations, providing a mechanical interface for grooving tooling. Does the RP118TM include mounting hardware? The standard listing does not specify included mounting hardware; confirmation of scope of delivery should be obtained from the detailed product documentation. Which toolholders or systems is this holder compatible with? Compatibility depends on the toolpost and clamping system in use; the item is classified as a grooving clamping holder and should be matched to the workshop's existing holder interfaces. Are dimensional drawings available for the RP118TM? Dimensional data are not present in the basic entry; detailed drawings or technical sheets are required to verify fitment and should be consulted prior to procurement. Who manufactures this grooving holder? The holder is produced by Teknik Makina and supplied under the RP118TM designation as a grooving clamping tool. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision-engineered clamping solution that combines stable support, quick insert compatibility and standardised mounting for smooth thread turning. Order the component via Metav Werkzeuge or consult the technical team for integration advice. Klemmhalter (clamping holder) SER 3232 — Right‑hand external thread, compatible with 16 ER inserts (Teknik Makina) The Klemmhalter is a compact clamping holder designed for turning external right‑hand threads on lathes and turning centres, offering standardised mounting and high stability for industrial and workshop use. Clamping holder for right‑hand external threads Compatible with 16 ER indexable inserts Head and body width 32 mm, cutting height 30 mm Overall length 170 mm, weight 1.41 kg Consistent thread form through rigid support The main benefit of this toolholder is its emphasis on precision and repeatability when producing external threads. Its geometry and 32 mm head width maintain a stable cutting position, which reduces vibration and helps achieve a uniform thread profile. Right‑hand thread cutting is defined by the holder’s orientation; a right‑hand tool advances when the spindle rotates clockwise, ensuring consistent engagement with the workpiece. For production runs where thread quality affects assembly performance, this holder provides a measurable improvement in surface finish and dimensional stability. Fast setup with standard indexable insert compatibility Designed to accept 16 ER indexable inserts and to pair with a P16‑ER16 boring bar mounting, the holder streamlines tooling logistics. Using standard insert sizes means reduced inventory complexity and faster changeovers on the shop floor. The clamping arrangement accepts the common M3.5x11 fastening screw and is serviceable with a T15 Torx key, enabling quick, repeatable insert changes without special tools. This combination lowers downtime between operations and supports efficient workflow in both small workshops and industrial turning cells. Compact dimensions for stable turning and easy integration With an overall length of 170 mm, cutting height 30 mm and a body height of 32 mm, the holder is sized to deliver rigidity without unnecessary overhang. The moderate mass (1.41 kg) contributes to dampening cutting forces while remaining manageable for routine tool changes and machine feed systems. Its ISO designation SER 3232 indicates standardised form and fit, simplifying integration into existing tool posts and fixtures; this reduces adjustment time and supports predictable machining behaviour. Practical features that speed maintenance and reduce errors The holder is supplied with a compatible TA061 U‑plate and uses the listed locating washer BSP010, helping to ensure correct alignment during installation. The secure clamping mechanism and standard screw interfaces mean fewer handling errors and reliable repeatability after maintenance. Being intended for right‑hand operation, the toolholder is optimised for conventional threading directions and common workshop practices, so set‑up instructions remain straightforward for trained staff and reduce the need for complex fixturing. For dependable right‑hand thread turning, request Teknik Makina SER 3232 via Metav Werkzeuge — technical advice and order support are available from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D504TM Manufacturer: Teknik Makina Designation: Klemmhalter For: external right‑hand thread ISO designation: SER 3232 Facts Head width: 32 mm Body width: 32 mm Holder height: 32 mm Cutting height: 30 mm Overall length: 170 mm Weight: 1.41 kg Insert type: 16 ER Boring bar reference: P16‑ER16 Torx key: T15 Fastening screw: M3.5x11 Special features Cutting direction: right‑hand U‑plate reference: TA061 Locating washer: BSP010 Compatible with standard 16 ER indexable inserts ISO series designation for standard fit FAQ What insert type fits this holder? The holder accepts 16 ER indexable inserts and is specified to work with P16‑ER16 bore references for standard insert clamping and alignment. Is the toolholder suitable for left‑hand threads? This version is configured for right‑hand external threads; left‑hand threading requires a left‑hand variant. Which tools are needed for insert changes? Insert replacement and clamping use a T15 Torx key and an M3.5x11 fastening screw, both common in workshop tool kits. How does the SER 3232 designation help in selection? The SER 3232 ISO designation indicates standardised dimensions and fit, simplifying compatibility checks with tool posts and U‑plates in existing setups. Can the holder be used for production runs on turning centres? Yes, the compact design, standard insert compatibility and stable geometry make it suitable for both one‑off and series production on lathes and turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of a secure Torx fastening, a compact 8 x 8 mm head and full compatibility with 11 ER indexable inserts delivers reliable right‑hand external threading with minimal set‑up time; order the clamp holder directly via Metav Werkzeuge or consult their specialists for machine‑specific advice. Clamp holder SER 0808 — clamp holder for 11 ER indexable inserts, right‑hand (Teknik Makina) The clamp holder SER 0808 is a compact toolholder for right‑hand external threading, designed to accept standard 11 ER indexable inserts and to fit H11‑ER11 boring bar interfaces Clamp holder for 11 ER indexable inserts Right‑hand cutting orientation Compact head: 8 x 8 mm for tight setups Torx T8 screw M2.5x5.5 for secure fastening Precision clamping for consistent external threading The SER 0808 toolholder provides reliable clamping for external threads by pairing the standard 11 ER insert pocket with a robust retention concept. The designation 11 ER refers to the insert size and geometry commonly used in external turning and threading applications, so the holder ensures correct seating and predictable chip flow. With a defined right‑hand cutting orientation, the toolholder supports consistent thread profile generation and reduced rework, making it suitable for medium‑volume production where repeatability matters. The secure clamp design minimises insert movement under cutting forces, improving surface finish and dimensional stability. Space‑saving geometry for flexible tool stations A compact head profile of 8 x 8 mm and an overall length of 100 mm make this toolholder a practical choice for machines with limited turret clearance or multiple adjacent tools. The restrained dimensions reduce the risk of interference and allow closer tool spacing, which is beneficial for multi‑operation setups. At an approximate weight of 0.061 kg, the holder contributes minimally to turret imbalance and can aid quicker acceleration and deceleration during cycle changes. The compact design therefore supports efficient machine layouts while maintaining the rigidity required for accurate external threading. Secure fastening and straightforward maintenance Retention is achieved with a Torx T8 drive and an M2.5x5.5 screw format, providing a positive torque interface that resists loosening during operation. The use of standard fasteners simplifies maintenance routines and spare‑parts management across the workshop. The holder is specified as SER 0808 and pairs with H11‑ER11 boring bars, ensuring compatibility with established tool systems. Quick insert changes and easy access to the clamping screw result in reduced downtime and predictable tool change procedures, supporting uptime and process reliability on the shop floor. For technical consultation, availability or application advice on the Teknik Makina clamp holder (SER 0808, SKU D494TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss integration with specific machines and insert grades Technical data Article number: D494TM Manufacturer SKU: D494TM ISO designation: SER 0808 Compatible boring bar: H11‑ER11 Compatible inserts: 11 ER Cutting direction: right Facts Head width: 8 mm Head height: 8 mm Cutting height: 20 mm Overall length: 100 mm Weight: 0.061 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Right‑hand external threading orientation Designed for indexable 11 ER inserts Compact geometry for tight turret layouts Standardised fastener interface for easy maintenance FAQ What inserts fit this holder? The clamp holder accepts 11 ER indexable inserts; it is designed to secure these standard external‑threading inserts reliably. Is the holder suitable for left‑hand threading? This specific toolholder is configured for right‑hand cutting; left‑hand threading requires a corresponding left‑hand holder. Which fastening hardware is used for clamping? Retention uses a Torx T8 drive with an M2.5x5.5 screw for positive torque and stable clamping. What dimensions are important for turret clearance? Key dimensions are the head 8 x 8 mm and the overall length 100 mm, which help determine fit in compact tool stations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, right‑hand external threading tool holder that combines precise clamping with broad compatibility for 16 ER inserts; the robust 25×25 mm head and 150 mm overall length support stable threading operations in workshop and production environments. Order directly via Metav Werkzeuge or consult our specialists for fitment and application advice. Clamping Threading Tool Holder (SER 2525) — Right‑hand, for 16 ER inserts by Teknik Makina Clamping Threading Tool Holder (SER 2525) for right‑hand external threading, designed for use with 16 ER indexable inserts and compatible M16‑ER16 shank systems for turning and threading tasks Right‑hand external thread holder Fits 16 ER indexable inserts Compact 25×25 mm head design 150 mm overall length for stable reach High compatibility that reduces tool change and downtime The holder is built for standardised workshop workflows: its SER 2525 designation and compatibility with 16 ER inserts enable the use of common threading plates, simplifying inventory and reducing changeover time. With a 150 mm overall length and a compact 25×25 mm head, the component provides consistent positioning for external threading operations. The design ensures repeatable results while limiting the need for multiple dedicated holders. Secure clamping and serviceable fastening for safe operation Clamping is achieved via the supplied fastening hardware specification: Torx T15 engagement and an M3.5×11 screw ensure secure retention of the insert pocket, while the included TA061 top plate and BSP010 spacer support correct insert seating. A 0.75 kg mass gives the assembly enough inertia to stabilise cutting forces without burdening the lathe turret. The 30 mm cutting height is optimised for standard insert geometries, so set‑up and calibration are straightforward and predictable. Designed for integration into production and workshop systems Right‑hand cutting direction and a clear bore‑bar designation (M16‑ER16) make the toolholder suitable for rapid integration into existing tool posts and bar systems. The compact footprint reduces interference on multi‑station setups, while the ISO‑style reference (SER 2525) aids documentation and tool management. Routine maintenance is made easier by standardised fasteners and accessible clamping components, supporting uptime and consistent part quality. Contact Metav Werkzeuge for availability and application support — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment and order the Teknik Makina SER 2525 holder (SKU D503TM) for reliable threading performance Technical data Article number: D503TM Manufacturer: Teknik Makina Designation: Clamping holder for external thread, right‑hand (SER 2525) SKU: D503TM Facts Head height: 25 mm Head width: 25 mm Cutting head width: 25 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.75 kg Special features For indexable inserts: 16 ER Bore‑bar designation: M16‑ER16 Clamping top plate: TA061 Spacer: BSP010 Torx key: T15 Torx screw: M3.5×11 Cutting direction: right FAQ What insert type does this holder accept? The holder is specified for 16 ER indexable inserts and is compatible with standard 16 ER threading plates for external threads. Is the toolholder suitable for right‑hand threading only? Yes. The holder is configured for right‑hand cutting and has a right‑hand thread orientation by design. Which shank or bore‑bar standard fits this clamping holder? The product lists M16‑ER16 as the bore‑bar designation, allowing integration with compatible ER16 clamping systems. What fasteners are used for clamping the insert? Clamping is secured with a Torx T15 interface and an M3.5×11 screw; the top plate TA061 and spacer BSP010 assist correct insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precision clamping, proven ER22 compatibility and a compact 170 mm overall length for efficient lathe setup. Order this clamp holder directly via Metav Werkzeuge or consult our experts for configuration advice. Klemmhalter (SER 3232) — Threading toolholder by Teknik Makina, right-hand, 32 mm head The Klemmhalter is a dedicated clamp holder for right-hand external threading on lathes, engineered for use with 22 ER indexable inserts and P22-ER22 boring bars. Right-hand threading orientation Compatible with 22 ER indexable inserts Cutting head width 32 mm Torx fastening: T15, M4x15 screw Faster setup and consistent results with precision clamping The holder delivers precision clamping that reduces tool movement and repeat set-ups, helping to keep cycle times predictable. With a 32 mm cutting-head width and a defined cutting height of 30 mm, the design ensures a stable tool centre and consistent thread form during external threading operations. The SER 3232 format integrates easily into conventional tool posts, so changeover between tools becomes a controlled, time-saving procedure rather than a trial-and-error task. Broad compatibility reduces tooling complexity Designed around the common ER22 interface, the clamp holder accepts standard 22 ER indexable inserts and mates with P22-ER22 boring bars, enabling seamless integration into existing tool pools. The inclusion of reference parts such as the U-plate TA062 and pass ring BSP010 means the holder works with familiar accessories, lowering the need for special adapters. This compatibility translates to lower stocking requirements and fewer disruptions on the shop floor. Secure fastening and service-friendly details Fastening is achieved with a Torx T15 engagement and an M4x15 screw, providing secure clamping torque while allowing straightforward maintenance with common workshop tools. The nominal weight of 1.396 kg and an overall length of 170 mm balance rigidity with manageable handling during set-up. The ISO designation SER 3232 indicates an established form factor for repeatable mounting and predictable mechanical behaviour under cutting loads. Practical benefits for workshop use The holder is optimised for right-hand (clockwise) threading operations and is specified for external thread turning applications. Its compact proportions and standardised interfaces support flexible machine assignment — from single-station lathes to multi-spindle turning centres — while the robust construction supports steady cutting, which in turn reduces rework. For operations that demand repeat accuracy and reliable clamping, this toolholder offers a pragmatic mix of performance and compatibility. Contact Metav Werkzeuge for tailored advice on Teknik Makina clamp holders (SER 3232), compatibility checks with ER22 tool systems and to arrange procurement via our Emmerich hub – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D506TM Manufacturer: Teknik Makina ISO designation: SER 3232 Facts Cutting head width: 32 mm Holder height: 32 mm Cutting height: 30 mm Overall length: 170 mm Weight: 1.396 kg Compatible insert type: 22 ER Special features For outside thread, right-hand For indexable inserts 22 ER Compatible with P22-ER22 boring bars U-plate: TA062 Pass ring: BSP010 Fastening: Torx T15 with M4x15 screw FAQ What is the clamp holder intended for? The Klemmhalter is intended for right-hand external threading on lathes, configured to hold 22 ER indexable inserts for consistent thread generation. Which inserts and toolbars are compatible? Compatibility is with 22 ER indexable inserts and P22-ER22 boring bars; the holder’s geometry and ER22 interface support standard insert sizes. What are the key dimensions to consider during setup? Key dimensions: cutting head width 32 mm, cutting height 30 mm, overall length 170 mm and weight 1.396 kg, which help define clearances and tool-post capacity. How is the insert retained and what hardware is required? Retention uses a Torx screw (T15) with an M4x15 thread; the fastening approach provides secure clamping and easy serviceability with common tools. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine precise left‑hand cutting geometry with a compact clamp height and ISO compatibility to ensure steady, repeatable turning results. Benefit from a robust DDHN toolholder that accepts DN-- 1506 indexable inserts and secure procurement or application advice through Metav Werkzeuge. D295TM Clamp Holder — DDHN toolholder for DN-- 1506 indexable inserts (left‑hand) by Teknik Makina The D295TM clamp holder is a left‑hand DDHN toolholder designed for turning applications with DN-- 1506 indexable inserts, offering compact clamping and consistent cutting geometry for workshop and production environments Left-hand cutting geometry Fits DN-- 1506 indexable inserts ISO DDHNL 2020 toolholder designation 20 mm clamp height, 125 mm overall length Reliable left‑hand turning performance for stable results The compact DDHN design delivers a controlled cutting position that is particularly suited for left‑hand turning operations. With a cutting angle 107.5° and defined geometry, the holder ensures the insert sits consistently at the intended clearance and approach angle, which helps to maintain tool life and dimensional repeatability. The modest clamping height 20 mm and 125 mm overall length reduce overhang, resulting in improved rigidity without compromising accessibility in tight setups. This combination is engineered to support efficient machining cycles and predictable tool behaviour. Seamless compatibility reduces setup time and inventory complexity Designed specifically for DN-- 1506 indexable inserts, the holder simplifies tooling selection and storekeeping. The ISO DDHNL 2020 designation standardises interface expectations, so insert seating and clamping forces are predictable across compatible systems. The toolholder's cutting head width 25 mm and cut height 33 mm match common insert geometries, enabling straightforward replacement and minimising adjustment time. Fewer variant combinations in the tool inventory translate into faster changeovers and a leaner production flow. Compact form and reliable clamping for repeatable machining Despite its compact footprint, the holder is manufactured to deliver dependable clamping and repeatability. The 0.428 kg mass gives a balance between rigidity and manoeuvrability for manual and automated toolposts, while the 20 mm body width provides a solid base for the insert seat. The DDHN clamping concept secures the indexable plate firmly, reducing micro‑movement under load. Where tool stability matters, this toolholder design helps to reduce chatter and maintain surface finish quality, supporting consistent part acceptance rates. Contact Metav Werkzeuge for tailored application advice and secure the D295TM clamp holder for stable left‑hand turning setups via Metav Werkzeuge's procurement channels Technical data Article number: D295TM Manufacturer: Teknik Makina Product designation: DDHN clamp holder Compatible inserts: DN-- 1506 Facts Clamp height: 20 mm Body width: 20 mm Cutting head width: 25 mm Cut height: 33 mm Overall length: 125 mm Weight: 0.428 kg Cutting angle: 107.5° Cutting direction: left Special features ISO designation: DDHNL 2020 Toolholder type: DDHN Bar designation: K15 Indexable insert compatibility: DN-- 1506 FAQ Which inserts are compatible with this holder? The D295TM clamp holder accepts DN-- 1506 indexable inserts and is engineered to secure them in the DDHN seat. Is the cutting direction left‑hand or right‑hand? This toolholder is configured for left‑hand cutting applications. What is the overall length and how does that affect rigidity? The overall length is 125 mm; the reduced overhang contributes to higher rigidity and improved resistance to chatter during turning. Does the holder follow an ISO designation for easier selection? Yes—the holder carries the ISO DDHNL 2020 designation, aiding compatibility with standardised insert forms. What is the weight and does it suit automated toolposts? Weighing 0.428 kg, the holder balances rigidity with manageable mass for both manual and automated toolpost arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust left‑hand toolholding with a 25 x 25 mm shank and 150 mm overall length provides stable clamping and repeatable cutting geometry for lathe operations; benefit from precise setup and consistent tool life. Order the insert holder directly via Metav Werkzeuge or ask our consultants for application guidance. Insert holder DDHN for DN-- 1506 indexable inserts (DDHNL 2525) – Left‑hand, shank 25 x 25 mm by Teknik Makina The insert holder DDHN for DN-- 1506 indexable inserts is a left‑hand turning toolholder designed for secure clamping of DN-- 1506 inserts in conventional and CNC lathes, providing a compact, rigid solution for short‑overhang turning tasks Left‑hand cutting orientation Shank 25 x 25 mm Cutting head width 32 mm Total length 150 mm Stable clamping for consistent turning results The holder's 25 x 25 mm shank and compact total length 150 mm ensure a low overhang and reduced vibration, which translates directly into improved surface finish and longer insert life. The combination of a cutting height 33 mm and a cutting head width 32 mm gives a reliable seating for the indexable insert, maintaining repeatability across serial production. For engineers seeking predictable geometry, the holder's mass (approx. 0.753 kg) contributes to rigidity without excessive bulk, making set‑up straightforward while preserving tool life and reducing rework. Compatibility with DN-- 1506 indexable inserts and ISO designation Designed specifically for DN-- 1506 indexable inserts, the tool follows the ISO style DDHNL 2525, which denotes the holder geometry and shank dimensions. The left‑hand cut direction is suited to operations where the tool approaches from the operator's right, and the cutting angle 107.5° provides the intended clearance and contact geometry for effective chip control. The mounting interface is specified as M15, enabling straightforward installation on corresponding boring bars or back‑plate adaptors. Explaining the concept briefly: indexable inserts allow rapid replacement without regrinding, so downtime is minimised and process stability is improved. Smooth integration into workshop workflows The toolholder's geometry and measured dimensions make it simple to incorporate into existing tool layouts. With a clear ISO designation and standard shank size, procurement and replacement are uncomplicated, supporting lean stocking and quick changeovers. The design emphasises pragmatic benefits: reduced set‑up time, predictable cutting behaviour and dependable repeatability in medium‑duty turning tasks. When paired with appropriate DN-- 1506 inserts, the system supports effective chip evacuation and consistent finish, aiding throughput targets and lower overall production cost per part. Contact Metav Werkzeuge for specific application advice on the Teknik Cutting Tools DDHN insert holder (SKU D296TM) and to arrange reliable supply direct from our Emmerich hub Technical data Article number: D296TM Manufacturer: Teknik Makina Facts Total length: 150 mm Shank width: 25 mm Shank height: 25 mm Cutting head width: 32 mm Cutting height: 33 mm Weight: 0.753 kg Cutting angle: 107.5° Direction: left Suitable for inserts: DN-- 1506 ISO designation: DDHNL 2525 Special features For indexable inserts: DN-- 1506 Designation (English): DDHN for DN-- 1506 Indexable Inserts ISO type: DDHNL 2525 Mounting shaft/thread: M15 Left‑hand turning holder Compact shank 25 x 25 mm FAQ Which inserts are compatible with this holder? The insert holder is specified for DN-- 1506 indexable inserts; matching DN-- 1506 grades and chipbreakers will ensure correct seating and performance. Is this holder suitable for right‑hand turning? No, this toolholder is configured for left‑hand cutting; for right‑hand operations a right‑hand variant should be chosen. What are the critical dimensions for toolpost setup? Key dimensions are the shank 25 x 25 mm, cutting height 33 mm and total length 150 mm, which guide set‑up height and overhang decisions. What does the ISO designation DDHNL 2525 indicate? DDHNL 2525 denotes the holder geometry and shank size standard; the code helps to match the holder to existing toolholders and fixtures according to industry conventions. Can the holder be mounted on standard boring bars? The holder uses an M15 mounting interface; compatibility depends on the bar or adaptor thread, so ensure matching interfaces when integrating into tool assemblies. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision, compatibility and compact design to maintain consistent turning performance. The toolholder's 107.5° cutting angle and ISO designation ensure reliable chip control and predictable cutting behaviour; order directly via Metav Werkzeuge or contact our specialists for tailored application advice. Clamping holder DDHN for DN-- 1506 indexable inserts — right-hand, 107.5° Clamping holder DDHN for DN-- 1506 indexable inserts designed for secure seating of DN-- 1506 plates in conventional turning applications, offering compact dimensions for tight setups DDHNR 2020 ISO holder for DN-- 1506 inserts 107.5° cutting angle for stable chip control Right-hand orientation for conventional turning Compact 125 mm length, 0.428 kg weight Increase process reliability with controlled cutting geometry The holder is engineered to deliver consistent chip formation thanks to its 107.5° cutting angle, which reduces vibration and promotes repeatable surface quality. The ISO designation DDHNR 2020 confirms standardised dimensions and fit, so integration into existing tool posts and setups is straightforward. With a compact 125 mm overall length and a modest mass of 0.428 kg, this toolholder minimises overhang while maintaining rigidity—an advantage for stable turning and predictable tool life. Secure insert seating for improved tool life and repeatability Compatibility with DN-- 1506 indexable inserts ensures secure clamping and reliable seat contact. The clamping geometry is designed to hold the insert firmly under cutting loads, which supports sustained tool performance and reduces the frequency of securement checks. The shank designation K15 indicates the intended bore/shank standard for mounting, aiding in fast selection and replacement within established CNC tool libraries. Compact dimensions that simplify workshop layouts With a 20 mm holder height, a 25 mm cutting-head width and 20 mm overall width, the design suits confined toolpost arrangements and multi-station turrets. The reduced footprint allows close tool spacing without sacrificing stability, making it suitable for short-run production or flexible job-shop environments where quick changeovers and tool density matter. The right-hand cut direction is matched to conventional turning cycles, reducing setup complexity. Practical handling and maintenance benefits for daily use Built to support efficient workshop routines, the holder’s layout simplifies insert change and clamping operations, lowering downtime. The combination of standardised ISO form, compact size and recognisable shank coding streamlines inventory management across multiple machines. Regular inspection of clamping screws and seat surfaces will preserve the holder's long service life and help sustain machining quality over extended production. For procurement or process consultation regarding Teknik Makina clamping holders, contact Metav Werkzeuge for application-specific advice and supply from our Emmerich facility Technical data Article number: D096TM ISO designation: DDHNR 2020 Compatible inserts: DN-- 1506 Brand: Teknik Makina Cutting direction: right Facts Overall length: 125 mm Weight: 0.428 kg Cutting angle: 107.5° Holder height: 20 mm Cutting-head width: 25 mm Width: 20 mm Cutting height: 33 mm Special features Shank designation: K15 Right-hand orientation Designed for indexable inserts DN-- 1506 Compact design for tight setups FAQ What inserts fit this holder? The clamping holder is specified for DN-- 1506 indexable inserts; the ISO form DDHNR 2020 ensures correct seating for those plates. Is the holder suitable for right-hand turning only? Yes, the toolholder is configured for right-hand cutting; its geometry and clamping orientation are optimised for conventional right-hand turning operations. What are the key dimensions to check for compatibility? Important dimensions include the 125 mm overall length, 20 mm holder height, 25 mm cutting-head width and the DDHNR 2020 ISO form for insert fit. How does the 107.5° cutting angle affect machining? The 107.5° angle promotes stable chip flow and reduced vibration, which supports consistent surface finish and extended insert performance in turning cycles. Can Metav Werkzeuge advise on application suitability? Metav Werkzeuge can provide application guidance and confirm whether the Teknik Makina clamping holder (SKU D096TM) fits specific machines and part programmes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, workshop-ready toolholder that combines secure clamping for DN-- 1506 indexable inserts with a compact 170 mm overall length and a 107.5° cutting angle for stable, repeatable turning operations. Order this item through Metav Werkzeuge or consult the team for application advice. Clamping holder DDHN for DN-- 1506 indexable inserts – Right‑hand, DDHNR 3232 (Teknik Makina) The Clamping holder DDHN for DN-- 1506 indexable inserts is a robust right‑hand turning toolholder designed for industrial lathe applications and compatible with standard P15 shank toolposts Secure clamping for DN-- 1506 inserts Right‑hand cutting orientation ISO designation DDHNR 3232 compatibility Compact 170 mm overall length Precision clamping for consistent turning results A focus on machining stability is delivered through the holder's rigid construction and defined geometry. The design secures DN-- 1506 indexable inserts with reliable repeatability, reducing tool deflection and improving surface finish. The cutting angle 107.5° supports predictable chip flow for typical turning operations, while the clamping height 32 mm and cutting edge height 33 mm maintain correct insert positioning to shorten setup time and lower scrap rates. These measurable properties make the toolholder suitable for production runs where consistent part quality and minimal rework are priorities. Simple integration with standard toolposts and shanks Engineers benefit from straightforward retrofitting: the holder conforms to the DDHNR 3232 ISO family and accepts common P15 shank mounting, so it fits existing toolposts without elaborate modification. The overall length 170 mm and head width 40 mm balance reach and rigidity, while the weight 1.29 kg contributes to stable spindle dynamics. Clear dimensional data ensures predictable tool overhang and enables correct speed/feed calculations, supporting efficient cycle planning and reduced trial runs on the shop floor. Designed for workshop reliability and throughput Built for repetitive use, this toolholder minimises downtime through quick insert changes and secure clamping mechanics; its specification supports right‑hand turning applications where reliable performance matters. The body width 32 mm provides a compact footprint for multi‑tool turrets, and the measured geometry helps limit vibration during heavier cuts. By focusing on durability and consistent clamping, the component contributes to higher machine utilisation and a smoother production flow across small and medium batch sizes. Contact Metav Werkzeuge today for tailored advice on Teknik Makina clamping holders and to confirm compatibility with existing toolposts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D098TM Manufacturer: Teknik Makina Product: Clamping holder DDHN for DN-- 1506 indexable inserts Core technical data Clamping height: 32 mm Cutting edge height: 33 mm Head width: 40 mm Body width: 32 mm Overall length: 170 mm Weight: 1.29 kg Cutting angle: 107.5° Special features Right‑hand cutting direction Compatible with DN-- 1506 indexable inserts ISO designation DDHNR 3232 P15 shank designation FAQ Which indexable inserts fit this holder? The holder is specified for DN-- 1506 indexable inserts; the geometry and clamping system are matched to that insert family for secure seating and reliable cutting performance. Is this holder suitable for left‑hand turning? This toolholder is configured for right‑hand cutting direction as indicated by its design and is therefore intended for right‑hand turning applications. What are the key dimensions to check before fitting? Check the overall length 170 mm, clamping height 32 mm, head width 40 mm and the P15 shank interface to ensure compatibility with the machine tool and turret. How is the product referenced for ordering and documentation? Order or reference the item using SKU D098TM and the designation DDHN for DN-- 1506 indexable inserts (DDHNR 3232) to ensure the correct toolholder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine precise indexable-insert compatibility with compact dimensions and robust clamping to achieve repeatable turning results and shortened setup times. Order the Teknik Makina SDHCL 2020 clamp holder via Metav Werkzeuge or consult our specialists for application-specific recommendations. Clamp holder SDHCL 2020 (SDHC for DCMT indexable inserts) — left-hand, 125 mm overall length The clamp holder SDHCL 2020 is a left-hand toolholder engineered for external turning with DCMT 11T3 indexable inserts in workshop and light production environments. SDHCL 2020 ISO designation For DCMT 11T3 indexable inserts Left-hand orientation, 107.5° cutting angle Compact 125 mm overall length Consistent part quality through secure clamping The principal advantage of this toolholder is its robust clamping design, which secures DCMT 11T3 inserts reliably and reduces insert movement under cutting forces. The combination of a deliberate clamp geometry and the ISO designation SDHCL 2020 makes inspections and replacements straightforward, promoting consistent part tolerance and fewer scrapped components. This results in measurable improvements in first-pass yield and less time spent reworking components. Space-saving dimensions for improved access With a 125 mm overall length and a narrow 20 mm width, the holder provides access to tight diameters and close shoulder work without compromising stiffness. The 25 mm cutting head width and 25 mm cutting height support a compact footprint while maintaining an effective contact area for the insert. Workshops benefit from a reduced tool overhang and improved chip flow, which together enhance tool life and machining stability on small to medium workpieces. Designed for straightforward shop-floor integration The holder’s left-hand orientation and a precise 107.5° cutting angle are suited to conventional turning setups where left-handed approach angles are required. The shank designation K11 ensures compatibility with common tooling fixtures, simplifying inventory management. At 0.411 kg, the component is light enough for fast changeovers yet engineered to deliver the rigidity expected in production runs. These attributes combine to shorten setup times and reduce the number of special adapters required. Practical benefits for procurement and production planning Adopting this clamp holder reduces the variety of specialised holders needed, since it accepts a widely used insert format and conforms to an ISO-style designation. Fewer tool variants mean lower logistical overhead and faster tool changes at the turret. The technical data support straightforward procurement choices and ensure that purchasing decisions are based on measurable parameters rather than approximations. For procurement or technical clarification regarding the Teknik Makina SDHCL 2020 clamp holder, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for expert guidance and delivery options. Technical data Article number: D350TM Manufacturer: Teknik Makina Product: SDHC for DCMT Indexable Inserts ISO designation: SDHCL 2020 Facts Height: 20 mm Cutting head width: 25 mm Width: 20 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.411 kg Cutting angle: 107.5° Suitable insert: DCMT 11T3 Cutting direction: left Special features Shank designation: K11 ISO designation: SDHCL 2020 For DCMT 11T3 indexable inserts Left-hand turning orientation FAQ Which insert type fits this holder? The holder accepts DCMT 11T3 indexable inserts; compatibility is stated for the SDHCL 2020 clamp holder (Teknik Makina, SKU D350TM). Is the toolholder suitable for left-hand turning only? Yes. The design is specified for left-hand cutting direction and the geometry is optimised for left-hand operations. What are the key dimensions to check for turret mounting? Important dimensions include the 125 mm overall length, 20 mm width, and 20 mm height; these determine clearance and fixture compatibility for the workshop turret. How does the clamp holder support repeatable setups? The clamp geometry and ISO-style designation ensure repeatable seating of DCMT 11T3 inserts, reducing variation between tool changes and improving process reliability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise compatibility with DCMT 11T3 indexable inserts, a firm 107.5° cutting geometry and a compact 20 mm clamp height for reliable, repeatable turning operations — order directly via Metav Werkzeuge or speak with our consultants for application advice. Klemmhalter SDHCR 2020 – clamping holder for DCMT inserts, 107.5° cutting angle (right-hand) Klemmhalter for right-hand turning, designed to accept DCMT 11T3 indexable inserts for stable, high-quality facing and light to medium turning tasks Right-hand clamping holder for turning Compatible with DCMT 11T3 indexable inserts 107.5° cutting angle for stable engagement Clamp height 20 mm, cutting head width 25 mm Precision compatibility that reduces setup time The SDHCR 2020 clamping design ensures consistent seating of DCMT 11T3 indexable inserts, which are replaceable cutting tips used to maintain cutting performance without regrinding. Precise seating and the 107.5° nose angle reduce deflection and promote even wear, so cycle times remain predictable. Thanks to the measured 20 mm clamp height and a 25 mm cutting-head width, the toolholder offers a compact footprint while maintaining rigidity — an important balance for medium-duty turning where both access and stability matter. Stable clamping for repeatable results Built for right-hand operations, this clamping tool secures the insert reliably using the standard clamping geometry SDHC for DCMT. The clamp mechanism is arranged to hold inserts with minimal play, which translates to fewer re-tightening incidents and reduced micro-vibration at the cutting edge. The nominal cutting height of 25 mm aligns the cutting tip consistently with the lathe centre, lowering the risk of unexpected offsets and thus decreasing setup checks. The overall weight of 0.411 kg contributes to a robust but manageable tool assembly during handling and changeover. Practical benefits for workshop productivity Adopting a holder designed to match common ISO-designated inserts simplifies inventory and tool management. Because indexable inserts can be rotated or replaced quickly, downtime is minimised and tool life is extended in comparison with brazed or monolithic cutters. The holder’s ISO designation SDHCR 2020 denotes a standardised shank and geometry that integrate with conventional tool posts and tool blocks; the shank reference K11 assists in confirming mount compatibility. Fewer variables at setup mean predictable machining quality across repeated batches, supporting leaner production planning. Robust supplier backing and application support Sourcing this clamping holder via Metav provides access to a broad selection of compatible inserts and assembly advice from a supplier with a European distribution and quality filter in Emmerich. Metav’s extended product range and experience in precision tools mean spare parts and matching components are available quickly, reducing lead times on replacements and upgrades. For newcomers to indexable tooling, the principle is straightforward: the holder secures a replaceable insert; when the cutting edge is worn, the insert is indexed or swapped — restoring cutting performance without retooling the entire holder. For precise turning applications relying on standard DCMT inserts, choose the Teknik Makina clamping holder and contact Metav Werkzeuge for tailored guidance and quick delivery — eMail info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: D250TM Manufacturer: Teknik Makina Facts Clamp height: 20 mm Cutting-head width: 25 mm Cutting height: 25 mm Cutting angle: 107.5° Overall length: 125 mm Weight: 0.411 kg Direction: right Special features ISO designation: SDHCR 2020 Suitable for: DCMT 11T3 indexable inserts Shank designation: K11 Bezeichnung (English): SDHC for DCMT Indexable Inserts FAQ Which indexable inserts fit this clamping holder? The clamping holder D250TM is designed for DCMT 11T3 indexable inserts and matches the insert geometry intended by the SDHC holder family. Is the holder suitable for right-hand or left-hand turning? This model is specified for right-hand turning applications; the orientation is fixed by the tool’s cutting geometry. How does the 107.5° cutting angle affect machining? A 107.5° nose angle provides stable engagement with the workpiece, helping to distribute cutting forces and improve insert life under typical turning conditions. What does ISO designation SDHCR 2020 mean for compatibility? The SDHCR 2020 designation indicates standardised shank and clamp geometry, facilitating integration with common tool posts and simplifying replacement across similar toolholders. Can this holder reduce setup time in batch production? Yes — by accepting standard indexable inserts such as DCMT 11T3, the holder allows rapid insert changes and consistent seating, which reduces setup variability and downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High clamping stability and a precise 107.5° cutting geometry reduce vibration and extend insert life; combined with a compact 125 mm overall length this holder gives predictable toolpaths and secure seating for VBMT inserts. Order the SVHBR 2020 clamping holder directly via Metav Werkzeuge or consult our team for tailored technical advice. SVHBR 2020 clamping holder 107.5° — for VBMT 1604 indexable inserts (Teknik Makina) SVHBR 2020 clamping holder designed for secure mounting of VBMT 1604 indexable inserts in right-hand cutting applications with a 107.5° approach angle For VBMT 1604 inserts 107.5° cutting angle Total length 125 mm Right-hand cutting configuration Stable clamping for consistent surface quality The robust clamping geometry of this holder delivers a high clamping force and a steady contact area that reduces micro-movement during cuts. With a defined 107.5° approach angle and compatibility with VBMT 1604 inserts, the design supports repeatable results and longer insert life by lowering vibration and heat build-up. This leads to fewer rework cycles and improved cycle-time predictability in batch production. Compact dimensions that simplify set-up and reach Designed with exacting dimensions — 125 mm overall length, 20 mm shank width, 20 mm shank height and a 25 mm cutting-head width — the holder balances rigidity with accessibility. A cutting height of 30 mm and a mass of 0.387 kg ensure stable tool engagement without excessive overhang. These measured values make clamping positions reproducible, helping to reduce set-up time and ensuring reliable toolpaths in confined fixtures. Straightforward maintenance and integration in existing toolrooms The holder follows common industrial conventions for insert change and fixturing, featuring the ISO designation SVHBR 2020 and a K16 clamping interface that fits standard tool post arrangements. The compact form and familiar mounting dimensions facilitate fast replacement of worn inserts and predictable regrinding schedules, supporting uninterrupted production. Robust construction minimises unplanned downtime and helps to sustain throughput across mixed production runs. For reliable clamping in turning and milling set-ups, request the Teknik Cutting Tools D354-1TM via Metav Werkzeuge for swift supply and expert advice from our Emmerich-based team. Technical data Article number: D354-1TM GTIN: 4061905153563 Brand: Teknik Makina Facts Overall length: 125 mm Shank width: 20 mm Shank height: 20 mm Cutting-head width: 25 mm Cutting height: 30 mm Weight: 0.387 kg Cutting angle: 107.5° Cutting direction: right Special features Compatible with VBMT 1604 indexable inserts ISO designation: SVHBR 2020 Clamping screw interface: K16 Label: Klemmhalter SVHBR 2020 107.5° VBMT 1604 FAQ Which inserts fit this holder? The SVHBR 2020 clamping holder is designed specifically for VBMT 1604 indexable inserts and ensures correct seating and orientation for that insert type. Is the holder suitable for right-hand cutting only? Yes. The tool geometry and approach angle are configured for right-hand cutting applications, as indicated by the product data. What is the overall length and why does it matter? The overall length is 125 mm, which provides a balance between reach and rigidity; shorter overhang contributes to improved stability and surface finish. Can this holder be used in tight fixtures? With a compact shank of 20 mm x 20 mm and a cutting-head width of 25 mm, the holder is suitable for installations where space is limited while still offering stable clamping. What designation should be referenced when ordering spare parts? Order using the article number D354-1TM or the ISO designation SVHBR 2020 to ensure the correct clamping interface and compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid clamping solution that combines precise compatibility with VBMT inserts and a stable 150 mm reach for consistent turning performance; order the clamping holder directly via Metav Werkzeuge or ask the consultants for technical guidance. Clamping holder D356-1TM — SVHB for WBMT indexable inserts, right-hand A Clamping holder D356-1TM engineered for right-hand turning operations, compatible with VBMT 1604 indexable inserts and suitable for external turning and general lathe use Right-hand orientation for conventional turning Compatible with VBMT 1604 indexable inserts 150 mm overall length for stable reach Robust mass of 0.712 kg for cutting steadiness Precision where it matters: consistent cutting geometry The holder delivers a defined cutting geometry through its 107.5° rake, which stabilises chip flow and reduces vibration during external turning. Designed for use with VBMT 1604 inserts, the toolholder ensures repeatable performance at changeover thanks to its standardised interface; this reduces setup variability and supports reliable process results in small-batch production or repair work. The right-hand orientation is optimised for conventional turning cycles, and the geometry is explained here to help assess toolpath and feed choices for given machining tasks. Rigidity and reach for stable machining A compact overall length of 150 mm combined with a head width of 32 mm and a body width and height of 25 mm produces a stiff assembly that resists deflection under cutting forces. The holder’s mass of 0.712 kg contributes to damping and steadiness during cuts, which translates into improved surface finish and extended insert life. The ISO designation SVHBR 2525 indicates a standardised shank profile, while the integrated thread specification M16 relates to the clamping screw interface – together these details support straightforward replacement and integration into existing toolposts. Compatibility and shop-floor practicality Designed for WBMT-style indexable inserts and explicitly matching VBMT 1604, the holder simplifies inventory and ensures interchangeability across common insert grades. The clamping concept facilitates safe insert changes and secure locking, keeping cycle interruptions to a minimum. Given its compact footprint and standard mount, this toolholder is well suited to workshop environments, maintenance shops and production cells that value repeatable setups and straightforward tool management. Technical customers will appreciate the clear, mechanical basis for its selection and the reduction in downtime associated with rapid insert swaps. For robust, repeatable turning from Teknik Cutting Tools, contact Metav Werkzeuge for product availability and tailored technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D356-1TM ISO designation: SVHBR 2525 Suitable for inserts: VBMT 1604 Core data Overall length: 150 mm Head width: 32 mm Body width: 25 mm Body height: 25 mm Cutting height: 30 mm Cutting angle: 107.5° Mass: 0.712 kg Features / Compatibility SVHB design for WBMT indexable inserts Right-hand cutting direction Shank thread / clamping screw: M16 SKU: D356-1TM FAQ What inserts fit this holder? The holder accepts VBMT 1604-style indexable inserts; compatibility is specified for WBMT-type insert geometry in the product description. Is the clamping holder suitable for right-hand turning only? Yes, this toolholder is configured for right-hand cutting; the geometry and chipflow are optimised for conventional right-hand turning operations. How does the 150 mm length affect performance? A 150 mm overall length provides a balanced reach for external work while maintaining rigidity; this length helps reduce deflection compared with longer overhangs. Which standard designation identifies the shank? The shank conforms to the ISO-style SVHBR 2525 profile, which assists with interchangeability in standard toolposts. What is the mounting thread specification? The clamping screw interface is specified as M16, which relates to the secure locking of the insert clamp. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, precision-engineered clamp holder that combines secure clamping, compatibility with VCMT 1604 indexable inserts and a compact 150 mm overall length for efficient left-hand turning processes; order directly via Metav Werkzeuge or consult the team for application advice. SVHCL 2525 clamp holder by Teknik Makina — left-hand turning for VCMT 1604 inserts A SVHCL 2525 clamp holder designed for left-hand turning operations with VCMT 1604 indexable inserts, suited to precision lathe work and CNC turning applications Left-hand cutting orientation Compatible with VCMT 1604 inserts ISO designation SVHCL 2525 Robust 150 mm overall length Greater process efficiency through precise geometry With a focus on reproducible turning results, the SVHCL 2525 clamp holder offers a defined cutting angle of 107.5° and compatibility with VCMT 1604 indexable inserts. The result is consistent chip flow and reduced rework rates, which contributes directly to shorter cycle times and improved first-pass yield. The holder’s geometry simplifies insert positioning and repeatability, making it an effective choice for production runs where stability and predictable performance are priorities. Secure clamping and vibration reduction for better surface finish The tool body features a clamping height of 25 mm, a cutting height of 30 mm and a head width of 32 mm, dimensions that create a rigid support for the insert and reduce micro-movements during cutting. This rigidity helps to lower vibration and chatter, delivering improved surface quality and longer insert life. At an operational level, the compact 150 mm overall length and the moderate weight of 0.707 kg balance accessibility with mass for steadier turning on small to medium workpieces. Fast integration into workshop setups and simple mounting Engineered for practical installation, the holder uses a mounting specification noted as M16 for secure attachment to compatible tool posts. The ISO marking SVHCL 2525 enables quick identification in tool rooms and aids inventory management. By standardising on a familiar holder designation and insert size, shops can reduce set-up time and keep tooling costs predictable. Clear mechanical interfaces make insert changes straightforward, supporting seamless workflow transitions between operations. Built for production environments and dependable supply Designed with daily workshop demands in mind, this clamp holder pairs practical dimensions with a serviceable design that supports repeatable performance across batches. The specification and compatibility information facilitates correct tool selection and reduces the risk of mismatched components. Combined with Metav’s established distribution and quality filter in Emmerich, the holder is backed by a supply chain focused on reliable availability and consistent product quality for industry and trade customers. For procurement or technical guidance on left-hand turning with VCMT 1604 inserts, contact Metav Werkzeuge for tailored advice and supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: D356TM Manufacturer: Teknik Makina Eclass: 21181004 ISO designation: SVHCL 2525 Description: SVHC for VCMT Indexable Inserts Overall length: 150 mm Weight: 0.707 kg Clamping height: 25 mm Head width (cutting head): 32 mm Cutting height: 30 mm Cutting angle: 107.5° Left-hand cutting orientation Compatible with VCMT 1604 inserts Mounting thread: M16 For VCMT indexable inserts (SVHC for VCMT Indexable Inserts) FAQ What insert type fits this holder? The holder accepts VCMT 1604 indexable inserts; the SVHCL 2525 geometry is matched to that insert size for reliable clamping and cutting performance. Is this holder suitable for right-hand turning? No, this tool is specified for left-hand cutting; for opposite direction machining a right-hand variant is required. What are the mounting and identification details for ordering? Order as SVHCL 2525 clamp holder (SKU D356TM) by Teknik Makina; mounting thread reference is M16 and the eClass is 21181004. How does the holder improve surface finish and tool life? The combination of a 25 mm clamping height, 32 mm head width and a stiff tool body reduces vibration, which helps to enhance surface finish and extend insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise clamping and a compact footprint for stable turning operations; the holder combines a defined 107.5° cutting geometry with compatibility for VCMT 1604 indexable inserts, supporting consistent chip control and repeatable set-ups. Order the clamp holder directly via Metav Werkzeuge or consult the sales team for integration advice. Clamp holder SVHCR 2020 – Right‑hand turning holder, 107.5° for VCMT 1604 by Teknik Makina A Clamp holder SVHCR 2020 designed to secure VCMT 1604 indexable inserts in right‑hand turning applications, offering a compact 125 mm footprint for flexible lathe setups Right‑hand holder for VCMT 1604 inserts 107.5° cutting angle for stable chip control Compact 125 mm overall length, robust design Precision clamping with 20 x 25 mm head dimensions Consistent clamping for repeatable turning results The toolholder is engineered for reliable clamping and repeatable seating of indexable inserts. As an ISO‑style turning holder (SVHCR 2020), it secures VCMT 1604 inserts at a defined 107.5° geometry, which stabilises the insert during engagement and reduces vibration. A stable clamp interface leads to consistent surface finish and predictable tool life, making the component suitable for production and jobbing operations where process reproducibility matters. Small footprint, big setup flexibility With an overall length of 125 mm and a head profile of 25 mm width by 20 mm height, the holder is compact yet sturdy. The reduced envelope facilitates close‑packed tool turret configurations and allows tighter tool spacing without sacrificing rigidity. The compact design supports quick tool indexing and minimal interference in multi‑tool turrets, contributing to shorter setup times and improved machine utilisation during batch runs. Designed for efficient machining and easy handling The holder’s 30 mm cutting‑height and moderate mass (0.384 kg) balance stiffness with ease of handling. The right‑hand orientation is optimised for standard turning directions and chip evacuation paths. The combination of defined geometry and measured mass reduces the likelihood of insert misalignment during index changes, which in turn decreases downtime related to re‑setting. For workshops prioritising throughput and predictable results, this holder offers a pragmatic blend of precision and operational efficiency. For reliable right‑hand turning with VCMT 1604 inserts, request supply and technical advice from Metav Werkzeuge — contact the Emmerich team for fast, dependable delivery and configuration support. Technical Data SKU: D254TM Manufacturer: Teknik Makina ISO designation: SVHCR 2020 Article name (EN): SVHC for VCMT Indexable Inserts Facts Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Head width: 25 mm Cutting height: 30 mm Weight: 0.384 kg Cutting angle: 107.5° Cutting direction: right Special features Compatible with VCMT 1604 indexable inserts Right‑hand turning holder ISO toolholder form SVHCR 2020 Suitable for stable chip control and repeatable setups FAQ What inserts fit this holder? The clamp holder accepts VCMT 1604 indexable inserts; the holder is specified for that insert form and secures them in the ISO SVHCR 2020 pocket. Is the holder right‑hand or left‑hand? This version is a right‑hand turning holder, designated SVHCR, suitable for standard right‑hand cutting directions. What are the key dimensions for turret planning? Key dimensions: 125 mm overall length, head width 25 mm, holder height 20 mm and cutting height 30 mm; weight approx. 0.384 kg. Which standard describes the holder form? The holder follows the ISO‑style designation SVHCR 2020, indicating the clamping form and right‑hand orientation for machining setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com