Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, indexable-insert milling solution that balances rigidity and economical running costs: the combination of a 10 mm shank for stability and a Ø 8 mm cutting diameter for precise slotting ensures consistent throughput and low tool-change time. Order the S370TM directly via Metav Werkzeuge or ask our consultants if needed. Shaft cutter S370TM for P32 indexable inserts — Ø 8 mm, 10 mm shank (Teknik Makina) The Shaft cutter S370TM is a shank-mounted milling tool designed for use with P32 08 indexable inserts, suitable for routine industrial milling tasks where rapid insert replacement and stable cutting are required Compatible with Walter P32 inserts Ø 8 mm cutting diameter 10 mm shank diameter 36 mm effective cutting length Consistent productivity with indexable-insert milling This cutter is engineered for efficient indexable-insert operation: the use of standard P32 08 inserts keeps running costs predictable while enabling rapid edge changes when wear occurs. The tool's clamping accepts a Torx M3 screw secured with a T8 key, providing reliable insert retention under typical machining forces. For production planners, the indexed-insert system converts tool life into short, controllable maintenance intervals and clear cost-per-cut calculations, improving floor-level scheduling and reducing unexpected stoppages. Stability and accuracy from shank to cutting edge A robust 10 mm shank and modest Ø 8 mm cutting diameter deliver low deflection and improved repeatability for narrow-slot milling and light face work. The 36 mm cutting length combined with a 130 mm overall length balances reach and rigidity, while a lightweight construction of 0.092 kg reduces spindle load and aids dynamic response on faster machines. These dimensional choices translate into measurable benefits: reduced runout, better surface finish on the workpiece and extended insert life through consistent chip evacuation and contact conditions. Straightforward maintenance and shop-floor compatibility Designed to accept widely available P32 08 indexable inserts from manufacturers such as Walter, this shank mill simplifies inventory and tooling strategies. The straightforward Torx fastening simplifies exchange procedures and minimises downtime during shift changes. For workshops seeking dependable supply and clear technical documentation, the tool fits into a streamlined procurement approach: standard inserts, familiar fastening methods and a compact tool geometry that integrates into mixed-machine fleets without bespoke holders or special adapters. For procurement of Teknik Makina cutting tools and tailored advice on the S370TM setup, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for reliable supply and application guidance. Technical data Article number: S370TM Manufacturer: Teknik Makina Diameter: 8 mm Shank diameter: 10 mm Cutting length: 36 mm Overall length: 130 mm Weight: 0.092 kg Torx screw: M3 Torx key size: T8 Special features For P32 08 indexable inserts Compatible with Walter insert systems Shank-mounted design for standard toolholders Replaceable insert concept for quick maintenance FAQ Which inserts fit this cutter? The cutter accepts P32 08 indexable inserts; the S370TM is designed for this insert size and for use with Walter-compatible plate geometries. What fastening is used for insert clamping? Insert retention on the S370TM uses a Torx M3 screw and is tightened with a T8 key for secure clamping. Is the S370TM suitable for small-slot milling? Yes, the tool's Ø 8 mm cutting diameter and rigid 10 mm shank offer the stability required for narrow-slot and light face milling operations. How long is the cutter and what is the cutting reach? The S370TM has an overall length of 130 mm and an effective cutting length of 36 mm, providing a balance between reach and stiffness. Can Walter inserts be used directly? Walter P32-style inserts are compatible; the S370TM is built to match the P32 08 geometry commonly supplied by Walter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a compact 8 mm shank, internal coolant and compatibility with CCMT 0602 indexable inserts for consistent bore finishing and reduced cycle times — order via Metav Werkzeuge or consult the technical team for application advice. Boring Bar A06-08H — 8 mm shank, internal coolant, for CCMT 0602 indexable inserts (Teknik Makina) The A06-08H boring bar is a compact internal‑coolant tool for precision internal turning with CCMT 0602 indexable inserts, optimised for restricted bores and stable chip control Internal coolant for reliable chip evacuation 8 mm shank for machines with compact tooling Optimised for CCMT 0602 indexable inserts Left-hand cutting with 95° cutting angle Precise internal turning and efficient chip evacuation The A06-08H is designed for constrained bores where accuracy and coolant delivery matter. The tool’s internal coolant channel directs cutting fluid close to the cutting edge, improving lubrication and chip evacuation, which reduces heat at the cutting zone and prolongs insert life. With an 8 mm shank and 100 mm overall length, the geometry is balanced for rigidity in tight setups while enabling consistent surface finish. The compatibility with CCMT 0602 inserts means cutting forces are carried by proven indexable grades, simplifying maintenance and insert changes. Secure clamping, quick service and predictable set‑up Set‑up time is minimised through the compact clamping interface and standard fasteners. The holder accepts a Torx T8 key and secures the insert with an M2.5×5.5 Torx screw, allowing repeatable torque and secure seating. A 4.3 mm clamping width stabilises the cutting head and reduces vibration in interrupted cuts. The left‑hand cutting orientation and 95° cutting angle are beneficial for specific turning directions and toolpath strategies; the arrangement is practical for many lathes and turning centres where reverse cuts or particular chip flow are required. Workshop reliability and application fit Built for routine production work, this compact tool weighs just 0.045 kg, making it easy to handle during tool changes and inventory management. The boring bar is suitable for users seeking a small‑diameter solution that supports indexable inserts for flexibility in grade and geometry selection. As a dedicated tool for internal turning and finishing, it integrates well into existing tooling kits and is a pragmatic choice where space, coolant feed and indexable insert convenience are primary concerns. Discuss application specifics with Metav Werkzeuge to verify compatibility with machine interfaces and insert grades before integrating the A06-08H into production. Technical data SKU: KA506TM Article number: A06-08H Product type: Boring bar Brand: Teknik Makina Facts Diameter: 8 mm Shank diameter: 8 mm Overall length: 100 mm Weight: 0.045 kg Cutting height: 25 mm Clamping width: 4.3 mm Cutting angle: 95° Cutting direction: left Torx key: T8 Torx screw: M2.5×5.5 Special features Internal coolant For CCMT 0602 indexable inserts Left-hand cutting orientation Category: Boring bars (Bohrstangen) FAQ What inserts are compatible with this boring bar? The boring bar accepts CCMT 0602 indexable inserts; the interface is prepared for common CCMT geometries to enable quick insert changes. Does the tool provide through‑coolant delivery? Yes, the tool is equipped with internal coolant that delivers cutting fluid close to the insert for improved chip control and tool life. Which cutting direction does the bar support? This tool is configured for left‑hand cutting with a 95° cutting angle, suitable for operations requiring reverse cutting orientation. What fasteners and tools are needed for insert changes? Insert retention uses an M2.5×5.5 Torx screw tightened with a T8 Torx key to ensure repeatable clamping. Is the A06-08H suitable for compact machining setups? Yes, the 8 mm shank and 100 mm overall length make the tool especially suitable for compact fixtures and restricted bore access in workshop environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, coolant-fed design combined with secure Torx clamping for precise, low-overhang milling with LNMU 0202 indexable inserts; order via Metav Werkzeuge or consult our specialists for application-specific advice. Shaft cutter S700TM — 8 mm shank cutter with internal coolant by Teknik Makina The Shaft cutter S700TM is a shank cutter designed for use with LNMU 0202 indexable inserts, delivering controlled coolant supply and compact geometry for precision external milling applications. 8 mm shank diameter for compact setups Internal coolant for improved chip control Suited for LNMU 0202 indexable inserts Torx T6 screw M1.8x4.1 for secure clamping Reduced-tool-overhang precision with coolant-fed operation The compact geometry and 8 mm shank minimise overhang, increasing rigidity during milling and helping to maintain dimensional accuracy across batches. Integrated internal coolant channels deliver cutting fluid directly to the cutting zone, which improves chip evacuation and supports consistent surface finishes while helping to moderate cutting temperatures. This configuration is especially useful where short, repeatable cuts and stable toolpaths are required. Designed for indexable insert systems to simplify maintenance This shank cutter is engineered specifically for the LNMU 0202 insert system and accepts inserts from Tungaloy, enabling rapid insert changes and predictable performance. The cutter uses a Torx T6 clamping screw (M1.8x4.1) to secure the insert, simplifying reassembly and reducing downtime. For operators unfamiliar with indexable tooling, the system separates the cutting geometry from the holder, allowing inserts to be rotated or replaced without regrinding, which reduces tooling costs over time. Compact overall length for tight set-ups and improved stability With an overall length of 100 mm and a cutting length of 30 mm, this cutter is tailored for constrained workspaces where stiffness and repeatability matter. The modest mass (0.075 kg) contributes to reduced centrifugal and vibration effects at moderate spindle speeds, improving process reliability in short-reach milling tasks. These physical dimensions make the tool well suited to fixtures and machines where minimising tool projection directly benefits surface quality and tool life. Practical notes for workshop integration and handling The tool is supplied with the Torx screw specification M1.8x4.1 and requires a T6 Torx key for insert changes and tightening; these standardised fastenings ensure consistent clamping torque and ease of service in the workshop. The cutter’s single cutting-edge configuration simplifies indexation routines and inspection. For coolant-fed setups, ensure the machine’s internal coolant circuit is compatible with the cutter’s supply path to achieve the intended cooling and chip control benefits. Secure the Teknik Makina S700TM through Metav Werkzeuge for compact, coolant-fed milling solutions and contact Metav Werkzeuge for tailored technical support and application recommendations Technical data SKU: S700TM Product: Shaft cutter (Schaftfräser) Compatible with: LNMU 0202 indexable inserts Manufacturer: Teknik Makina Internal coolant: yes Overall length: 100 mm Shank diameter: 8 mm Cutting length: 30 mm Cutting edges: 1 Weight: 0.075 kg Torx key: T6 Torx screw: M1.8x4.1 Facts Diameter: 8 mm Shank diameter: 8 mm Overall length: 100 mm Cutting length: 30 mm Weight: 0.075 kg Cutting edges: 1 Special features Internal coolant Compatible insert manufacturer: Tungaloy Suited for LNMU 0202 inserts Torx T6 clamp system Screw M1.8x4.1 FAQ What insert type fits this cutter? The cutter accepts LNMU 0202 indexable inserts; compatibility with Tungaloy inserts is specified for the S700TM. Is the tool suitable for coolant-fed machining? Yes, the S700TM features internal coolant channels to deliver fluid directly to the cutting zone. Which key and screw are required for insert changes? Insert clamping uses a Torx T6 key and a M1.8x4.1 Torx screw for secure fastening. How long is the cutting portion and how does that affect setup? The cutter has a 30 mm cutting length, offering a balance between reach and rigidity for short-reach milling tasks. What are the main dimensional data to check before mounting? Check the 8 mm shank diameter, 100 mm overall length, and the machine’s coolant connection to ensure compatibility with the S700TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact 8 mm diameter, integrated internal coolant and compatibility with LNMX 0402 indexable inserts for consistent, high-quality milling performance; order the S084TM shaft milling cutter directly via Metav Werkzeuge or ask our consultants if needed. S084TM shaft milling cutter — 8 mm, internal coolant (Teknik Makina) The S084TM shaft milling cutter is a compact indexable-insert milling tool engineered for precision slotting and peripheral milling where small diameters and coolant-fed cutting are required. *8 mm diameter for compact toolpaths *Internal coolant for improved tool life *Compatible with LNMX 0402 indexable inserts *10 mm shank for secure clamping Precision geometry for predictable machining results The compact 8 mm cutting diameter combined with a 20 mm cutting length delivers stable engagement in narrow slots and interrupted cuts. Engineered for indexable inserts, the tool body keeps the cutting edge positionally consistent, so machining reproducibility is improved and downtimes for adjustments are reduced. The use of an indexable insert system, rather than brazed cutters, simplifies maintenance and keeps inventory costs down while enabling quick adaptation to different chipbreaker geometries. Coolant-fed design to extend tool life and improve surface finish An integrated internal coolant channel supplies cutting fluid directly to the insert interface, which enhances chip evacuation and reduces thermal load at the cutting edge. As a result, flank wear is slowed and surface integrity of the workpiece is preserved. For batch production or high-duty operations, this coolant-fed configuration supports longer tool life and more consistent part quality than dry machining in comparable setups. Secure clamping and straightforward insert replacement The tool uses a Torx-fastening system for quick and reliable insert retention: M1.8x4.1 screw with T6 key engagement. This arrangement ensures repeatable clamping torque and minimises the risk of insert movement under load. A 10 mm shank provides a stable interface with standard collet chucks or shrink-fit holders, reducing vibration and improving surface finish in light-duty milling and finishing passes. Compact integration and compatibility with Korloy inserts Designed specifically for LNMX 0402 indexable inserts, this cutter accepts inserts from Korloy, enabling the selection of grades and geometries optimised for a wide range of applications. The overall length of 100 mm keeps the assembly compact for tight tool magazines and small machine envelopes, while the modest mass contributes to low spindle load for small- to medium-sized milling spindles. The result is a balance of accessibility, changeover speed and machining reliability. For machining projects requiring compact, coolant-fed indexable tooling, contact Metav Werkzeuge for application advice and reliable supply of the Teknik Makina S084TM shaft milling cutter. Technical data Article number: S084TM Product: Shaft milling cutter for LNMX 0402 indexable inserts Manufacturer: Teknik Makina Label: 8mm Schaftfräser LNMX 0402 L100mm mit Innenkühlung Facts Diameter: 8 mm Shank diameter: 10 mm Overall length: 100 mm Cutting length: 20 mm Weight: 0.02 kg Number of cutting edges: 1 Special features Internal coolant Compatible with LNMX 0402 inserts Suitable insert manufacturer: Korloy Torx screw: M1.8x4.1 Torx key: T6 Category: Shaft milling cutters FAQ Is this cutter compatible with Korloy LNMX 0402 inserts? Yes. The S084TM shaft milling cutter is designed for LNMX 0402 inserts and is compatible with Korloy insert grades. Does the tool support internal coolant delivery? Yes. Internal coolant is integrated and delivers fluid to the cutting zone, improving chip control and tool life for the S084TM. What are the key dimensions of the tool? The cutter has an 8 mm diameter, a 10 mm shank, 100 mm overall length and a 20 mm cutting length. Which screw and key are required to fasten inserts? Insert clamping uses an M1.8x4.1 Torx screw with a T6 Torx key for secure and repeatable fastening. Is the S084TM suitable for compact machine setups? Yes. The compact diameter and 10 mm shank make the S084TM well suited to tight toolpaths and small tool magazines (SKU S084TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of compact design, proven insert compatibility and stable clamping, this tool ensures reliable parting and grooving in confined setups; order directly through Metav Werkzeuge or request tailored technical advice from our specialists. Mini parting clamp holder – 16 mm shank, for NFTG11 inserts (Teknik Makina) A Mini parting clamp holder engineered for accurate grooving and parting operations in small to medium workshop lathes, compatible with Korloy NFTG11 indexable inserts. Compact 16 mm shank for tight machine setups Compatible with Korloy NFTG11 inserts 95 mm overall length for reduced overhang Lightweight 0.126 kg for improved stability Precise insert compatibility reduces setup uncertainty The holder is optimised for use with NFTG11 indexable inserts and original Korloy geometries, delivering reproducible seating and predictable cutting behaviour. The clamping concept is designed to work with standard grooving inserts, so tool life and process stability are enhanced by correct insert seating; this reduces time spent on trial adjustments and supports consistent part quality. For shops using standard Korloy grade inserts, the integration with the tooling system is straightforward and traceable. Minimal overhang and compact shaft for stable cuts With a 16 mm shank and a 95 mm overall length, the design minimises unsupported overhang and reduces chatter in narrow working envelopes. The reduced mass, at 0.126 kg, lowers centrifugal and vibration effects during higher spindle speeds, while the listed 8 mm cutting diameter aligns with common small-groove applications. These dimensional choices translate into a more rigid setup and fewer rejected parts from vibration-induced errors, enabling more efficient cycle times with less rework. Workshop-ready design for straightforward integration The clamping tool is supplied in a format that matches the S16 tool-bar designation and the D08 K25 L095 clamp-bar reference, simplifying inventory management and tool change routines. The compact clamp holder is particularly suitable for job shops and specialised turning departments that require quick tool swaps and reliable repeatability. Where a compact grooving solution is required, this holder bridges off-the-shelf insert availability with easy installation into common small-lathe tool posts, helping maintain a steady production flow without complex adaptations. Contact Metav Werkzeuge for personalised tooling advice and exact compatibility checks for Teknik Makina parts; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K802TM Manufacturer: Teknik Makina Article name: Mini Stechklemmhalter Core technical data Shank diameter: 16 mm Cutting height: 25 mm Cutting diameter: 8 mm Overall length: 95 mm Weight: 0.126 kg Compatible insert type: NFTG 11 Compatible insert manufacturer: Korloy Bar designation: S16 Clamping bar reference: D08 K25 L095 Special features Compact clamping design for parting/grooving Suited to insert-based grooving systems Low-mass construction for reduced vibration Designed for small and medium lathe tool posts FAQ What inserts fit this clamping holder? The holder is specified for NFTG11 indexable inserts and is designed to work with Korloy insert geometries for reliable seating and cutting performance. Which shank diameter does the holder use? The tool features a 16 mm shank, compatible with S16 tool-bar installations commonly found in compact lathe setups. Is the holder suitable for narrow grooving tasks? Yes, the compact dimensions and an indicated cutting diameter of 8 mm make it well suited for narrow grooving and parting operations in confined workspaces. How does the tool help reduce vibration? A short 95 mm overall length combined with a lightweight construction (0.126 kg) reduces unsupported overhang and contributes to greater rigidity, lowering the risk of chatter. Can this holder be integrated into existing tool setups? The holder matches standard S16 bar specifications and the D08 K25 L095 clamping reference, enabling straightforward integration into compatible tool posts and bars. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑precision mini grooving clamping holder that combines a 16 mm shank with an 11 mm cutting height for stable, repeatable grooving and parting operations; order directly via Metav Werkzeuge or consult its technical advisors for suitability checks. Mini grooving clamping holder K810TM — compact clamp holder for indexable inserts, 16 mm shank (Teknik Cutting Tools) A Mini grooving clamping holder K810TM designed for compact turning centres and lathe setups, suited to grooving and parting tasks with D08 indexable inserts. Compact 16 mm shank for tight setups Compatible with D08 indexable inserts 11 mm cutting height for stable cutting Lightweight 0.098 kg for reduced spindle load Precision and stability in confined toolposts The compact design delivers stable clamping where space is limited. The combination of a 16 mm shank and a short overall length means the toolholder offers reduced overhang and improved rigidity, which lowers vibration and improves surface finish. The holder’s 11 mm cutting height matches standard insert geometries, ensuring correct insert seating and consistent cutting planes; this promotes reliable process control and repeatable results on serial work. The lightweight construction (0.098 kg) minimises additional load on the spindle, helping maintain concentricity during higher spindle speeds. Faster insert changes and predictable tool life Designed around D08 inserts, the clamping concept supports quick indexable‑insert swaps to reduce downtime. The holder accepts standard insert geometry so indexable inserts can be rotated or replaced without regrinding, delivering a predictable tool‑life strategy and lower per‑part machining costs. The shank designation S16 indicates compatibility with common 16 mm shank toolposts, simplifying tool library management across machines. Clear seating and secure clamping reduce insert movement under load, which benefits cycle time and reduces scrap rates in small‑batch production. Suited to workshops that value versatility and trust The mini clamping tool performs well in high‑mix, low‑volume environments and on compact lathes where accessibility and repeatability matter. Its compact design and compatibility with widely available inserts make it a practical choice for job shops, maintenance departments and precision workshops that require fast changeovers and reliable results. Backed by Metav’s supply chain and quality control, the K810TM supports a dependable workflow from stock to shop‑floor, reinforcing operational continuity and reducing procurement complexity. Contact Metav Werkzeuge for a detailed machine‑compatibility check and a tailored delivery proposal for the Teknik Cutting Tools Mini grooving clamping holder K810TM; Metav’s technical advisors will confirm suitability, lead times and supply from Emmerich Technical data Article number: K810TM Manufacturer: Teknik Makina Insert type: D08 Shank designation: S16 Shank diameter: 16 mm Cutting height: 11 mm Overall length: 93 mm Weight: 0.098 kg Diameter: 8 mm Core technical data Shank diameter: 16 mm Cutting height: 11 mm Overall length: 93 mm Weight: 0.098 kg Diameter: 8 mm SKU: K810TM Compatible insert: D08 Special features For indexable inserts D08 S16 shank designation Compact design for tight setups Lightweight construction 0.098 kg Intended for grooving and parting operations FAQ Which insert type fits this holder? The mini grooving clamping holder accepts D08 indexable inserts; the holder is engineered for standard D08 seating and clamping. What shank size does the holder use? Shank diameter is 16 mm (shank designation S16), suitable for 16 mm toolposts and holders. Is the holder suitable for compact lathes? Yes — the compact overall length of 93 mm and lightweight design make the holder well suited to small turning centres and confined toolpost spaces. How does the clamping concept affect insert life? Secure seating and consistent cutting height reduce insert movement and uneven wear, which helps to extend the useful life of indexable inserts and stabilise process outcomes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, right‑hand toolholder that combines compatibility with CC-- 0602 indexable inserts and a slim 10 mm shank for stable clamping; the result is consistent finishing performance and reduced spindle load — order via Metav Werkzeuge or consult the technical team for application advice. Boring Bar S06H SCLCR (K100TM) — 8 mm, right‑hand holder, Teknik Makina A boring bar S06H SCLCR designed for external turning and finishing with CC-- 0602 indexable inserts, optimised for precise, low‑vibration operations in metalworking workshops and CNC turning centres. Right-hand toolholder for consistent chip control Compatible with CC-- 0602 indexable inserts 8 mm cutting diameter with 10 mm shank 100 mm overall length, lightweight 0.052 kg Stable cutting and repeatable results for precision turning This turning toolholder delivers stable cutting through a compact geometry that lowers vibration and improves tool life. The S06H SCLCR configuration is a recognised standard in turning toolholders and ensures secure seating of indexable inserts, simplifying insert changes and reducing downtime. The combination of a slim 10 mm shank and an 8 mm cutting diameter provides a balance between accessibility in tight bores and sufficient rigidity for finishing passes. The 95° cutting angle supports consistent corner engagement and predictable chip flow, which is beneficial in mixed‑batch or small‑series production. Efficiency and compatibility that reduce setup complexity Designed for use with CC-- 0602 insert geometry, this toolholder allows parts manufacturers to keep spare inserts and toolholders interchangeable across machines. The lightweight construction (0.052 kg) reduces dynamic loads on the spindle, improving acceleration and cycle time without compromising surface quality. The 25 mm cutting height ensures correct insert projection and clamping stability, while the right‑hand cutting direction matches standard turning operations. Clear compatibility with commonly stocked insert sizes streamlines inventory and simplifies process planning for workshops and subcontractors. Built for workshop reliability with practical handling benefits The compact 100 mm overall length and standard ISO designation make the holder easy to fixture and fast to install in turret or boring bar systems. The straightforward clamping concept reduces handling time during tool changes and supports predictable machining results, which contributes to higher first‑pass yields. Metav’s supply philosophy — a quality filter in Emmerich with broad availability of precision tooling — complements the product’s practicality: reliable delivery and consistent part quality support continuous production without unexpected interruptions. Contact Metav Werkzeuge for tailored technical advice or procurement support for Teknik Makina toolholders — assistance is available by phone or e‑mail to ensure correct selection and rapid delivery Technical data Article number: K100TM Manufacturer: Teknik Makina ISO designation: S06H SCLCR Description: Boring bar / toolholder for indexable inserts (SCLC type) Facts Cutting diameter: 8 mm Shank diameter: 10 mm Cutting height: 25 mm Overall length: 100 mm Weight: 0.052 kg Cutting angle: 95° Cutting direction: right Special features Compatible with CC-- 0602 indexable inserts SCLC holder type for secure insert clamping Lightweight design for reduced spindle load Suitable for external turning and finishing operations FAQ What insert size fits this toolholder? The boring bar accepts CC-- 0602 indexable inserts; the holder is specified for this insert format to ensure correct seating and chip control. Is the holder suitable for finishing cuts on small diameters? Yes. The compact geometry and 10 mm shank provide the rigidity required for finishing passes on small diameters while keeping access in confined areas. Which cutting direction is intended for this toolholder? This holder is configured for right‑hand cutting, matching standard lathe turning directions and insert orientations. What is the ISO designation and how does it help in selection? The ISO designation S06H SCLCR identifies the holder form and mounting style, aiding compatibility checks with turrets and cross‑slides during tool planning. Can this holder reduce cycle times on medium‑run parts? The lightweight construction and stable clamping help reduce dynamic spindle loads and improve acceleration, which can contribute to shorter cycle times on medium‑run production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines precise compatibility with CC-- 0602 inserts and a rigid S08H SCLCR holder for stable turning performance; order the K102TM boring bar directly via Metav Werkzeuge or consult the technical team for tailored guidance. K102TM Boring Bar (S08H SCLCR) – Ø8 mm cutting diameter, 100 mm overall length, for CC-- 0602 indexable inserts (Teknik Makina) K102TM Boring Bar is a right‑hand turning/boring tool holder engineered for external machining with CC-- 0602 indexable inserts, suitable for precision workshop and light production applications Right‑hand SCLCR holder Compatible with CC-- 0602 inserts Ø8 mm cutting diameter 100 mm overall length Predictable machining with proven insert compatibility The S08H SCLCR design ensures secure seating and repeatable positioning for indexable inserts, reducing setup variability and improving process reliability. Compatibility with CC-- 0602 inserts allows the bar to be used with common carbide grades and geometries, which supports consistent chip formation and surface finish. The right‑hand orientation and the S08H SCLCR mounting standard make the tool straightforward to integrate into existing toolholders and turret systems, helping to shorten machine downtime and maintain cycle times. Stable clamping and geometry for reduced vibration A cutting diameter of Ø8 mm combined with a shaft Ø10 mm and 100 mm overall length delivers a balance between accessibility and stiffness that suits external turning tasks where tool deflection must be minimised. The cutting height 16 mm and cutting angle 95° are configured to position the insert correctly relative to the workpiece centre, improving contact stability. With a mass of 0.053 kg, the bar offers low inertial load for smoother acceleration while retaining sufficient rigidity; this contributes directly to improved tool life and surface quality in short‑run and repeat operations. Simple integration into workshop routines and inventory Designed for indexable insert workflows, the bar accepts the standard CC-- 0602 pocket and is identified by the ISO designation S08H SCLCR, which aids in procurement and inventory control. The right‑hand cutting direction and compact Ø8 mm profile make the item a pragmatic choice for setups requiring narrow overhangs or access to confined geometries. Technical teams benefit from a familiar interface for insert change and clamping, which supports rapid replacement and reduces consumable-related delays in production. For procurement and technical enquiries about Teknik Makina tooling, contact Metav Werkzeuge for ordering and expert advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K102TM Manufacturer: Teknik Makina Product type: Boring bar / tool holder ISO designation: S08H SCLCR Compatible inserts: CC-- 0602 Cutting direction: right Dimensions & weights Cutting diameter: 8 mm Shaft diameter: 10 mm Cutting height: 16 mm Overall length: 100 mm Cutting angle: 95° Weight: 0.053 kg Features SCLC for CC-- Indexable Inserts Holder size: 06 Right‑hand orientation Compact design for reduced overhang FAQ Which insert size fits this tool? The bar is specified for CC-- 0602 indexable inserts and is designed to accept that pocket size for straightforward insert replacement. Is the tool right‑hand or left‑hand? The holder is a right‑hand SCLCR type, intended for conventional right‑hand external turning operations. What is the effective cutting diameter? The effective cutting diameter for the tool is Ø8 mm, suitable for narrow‑profile external cuts and light boring tasks. How long is the bar and how does that affect rigidity? The overall length is 100 mm; the relatively short overhang combined with a shaft Ø10 mm helps maintain stiffness and reduce vibration in typical workshop setups. What standard identifies the holder geometry? The tool carries the ISO designation S08H SCLCR, which identifies its mounting style and helps ensure compatibility with corresponding toolposts and turrets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precisely engineered drill body that combines Ø 8 mm cutting capability with compatibility for XCMT 040104 indexable inserts; order via Metav Werkzeuge or consult the technical team for application-specific advice. Indexable Insert Drill Body (Vollbohrer) — Teknik Makina, Ø 8 mm, XCMT 040104 compatible A Indexable Insert Drill Body designed for precision holemaking in CNC and production environments, accepting XCMT 040104 indexable inserts and providing a compact 68 mm overall length for tight setups. Compatible with XCMT 040104 inserts Ø 8 mm cutting diameter 18 mm cutting length for stable engagement 12 mm shank for standard toolholders Precision drilling with controlled cutting engagement The tool body is engineered to support consistent hole quality by combining a defined 18 mm cutting length with a small cutting diameter of Ø 8 mm. This configuration reduces lateral deflection during machining and enables predictable chip formation when paired with the correct insert geometry. The use of indexable inserts such as XCMT 040104 means the cutting edge can be restored quickly by indexing or replacing the insert, so the tool holder remains in service longer and tool costs are concentrated on consumable inserts rather than entire cutters. Such a setup is especially helpful where repeatable hole tolerances are required across short to medium production runs. Stable clamping and compact dimensions for tight fixtures A 12 mm shank and a total length of 68 mm make the holder suitable for compact fixtures and tool magazines where space is limited. The specified 42 mm connection/holder engagement length ensures a secure fit in standard collets or holders, which helps maintain concentricity and reduce runout. This stability is crucial for drilling accuracy and surface finish when the tool is used in automatic cycles on CNC machines. By selecting a short, rigid tool body, machining centres can achieve higher spindle speeds and feeds within the limits of the chosen insert, improving cycle times without compromising precision. Cost efficiency through replaceable cutting edges Lightweight construction (approx. 0.056 kg) keeps handling and tool-change procedures straightforward while lowering inertial load during rapid tool changes. The principal economy comes from the use of indexable inserts: when the cutting edge degrades, only the insert need be replaced rather than the entire drill body, which reduces consumable expenditure and minimises machine downtime. Compatibility with inserts from established manufacturers simplifies procurement and inventory management and supports predictable running costs across repetitive operations. Practical applications and selection tips This indexable drill body is suited to production-oriented drilling tasks where repeatability and fast serviceability are priorities. It is intended for use with XCMT 040104 inserts from Korloy and is offered by Teknik Makina as a compact drilling solution for workshops and industrial toolrooms. When choosing the matching insert grade and geometry, consider the workpiece material and required surface finish; the holder delivers the mechanical stability needed for many common drilling scenarios in precision engineering and general manufacturing. Contact Metav Werkzeuge for tailored application advice and to order the Teknik Makina indexable insert drill body (SKU U08TM) directly — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: U08TM Name: Indexable Insert Drill Body (Vollbohrer) Manufacturer: Teknik Makina Facts Diameter: 8 mm Cutting length: 18 mm Shank diameter: 12 mm Shank/holder engagement length: 42 mm Overall length: 68 mm Weight: 0.056 kg Special features For indexable inserts type XCMT 040104 Compatible with Korloy inserts Compact design for tight tool setups SKU: U08TM FAQ Which insert type does this drill body accept? The drill body is designed for XCMT 040104 indexable inserts; the designation is stated on the product data and aligns with common insert sizes for small-diameter drilling. What are the critical dimensions for toolholder selection? Key dimensions are a 12 mm shank diameter, 42 mm engagement length, and 68 mm overall length — these determine compatibility with collets and short toolholders. Is the tool suitable for automated tool changes in CNC machines? Yes, the compact form and standard shank size make the holder compatible with automated tool-change systems where short, rigid tools are preferred. How does the insert system affect running costs? Using indexable inserts concentrates wear on replaceable cutting edges; this reduces the need to replace complete drill bodies and simplifies stockkeeping for consumables. What is the product SKU and who supplies it? The SKU is U08TM and the tool is supplied by Teknik Makina as an indexable insert drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of an accurate, compact milling solution that combines reliable insert compatibility with stiff clamping for repeatable results. The tool’s 8 mm cutting diameter and 10 mm shank deliver stable cuts and reduced vibration, while compatibility with RDMW 0501 indexable inserts simplifies tooling logistics — order via Metav Werkzeuge or request specialist advice for immediate availability. Teknik Makina shaft cutter R080TM — 8 mm cutting diameter, for RDMW 0501 indexable inserts Teknik Makina's compact shaft cutter designed for machining operations that require small‑diameter milling with indexable inserts Compatible with RDMW 0501 indexable inserts 8 mm cutting diameter for fine feature work 10 mm shank for rigid clamping and low vibration Secure Torx fixation M2x4.2 with T6 key Consistent small‑diameter performance for precise features The R080TM shaft cutter is built for controlled, consistent milling where small diameters matter. Its 8 mm cutting diameter and single cutting edge produce predictable chip formation and a defined cutting force, which benefits finishing passes and tight tolerances. Compatibility with RDMW 0501 indexable inserts (common in workshop environments) reduces tooling complexity: insert changes are quick and spare inventory can be standardised, improving machine uptime and process reliability. The compact design supports fine contouring and pocketing while maintaining cutting stability. Rigid clamping and fast insert changes to keep cycles short A 10 mm shank ensures secure clamping in standard collets or holders, increasing rigidity and lowering the risk of chatter during operation. The cutting length of 27 mm and an 80 mm overall length provide sufficient reach for many small‑part tasks without excessive overhang. Insert retention is achieved with a Torx M2x4.2 screw tightened with a T6 key, offering even torque distribution across the pocket and reliable retention during interrupted cuts. The lightweight construction (approx. 0.053 kg) simplifies handling and tool changes on the shop floor. Designed for efficient tooling logistics and predictable results Using indexable inserts compatible with established manufacturers such as Taegutec allows the tool to be integrated into existing inventory strategies and cutting programmes. The R080TM minimises downtime during insert replacement and supports quick re‑set of cutting parameters thanks to repeatable insert positioning. For production environments seeking to streamline processes, this cutter contributes to reduced tool variety, simpler maintenance routines and a steady quality of results. For delivery from stock and tailored technical advice on the Teknik Makina R080TM shaft cutter, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will advise on compatibility and availability. Technical Data Article number: R080TM Manufacturer: Teknik Makina Compatible inserts: RDMW 0501 Compatible insert manufacturer: Taegutec ECLASS: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 8 mm Shank diameter: 10 mm Cutting length: 27 mm Overall length: 80 mm Number of cutting edges: 1 Weight: 0.053 kg Special features Torx screw M2x4.2 Torx key size: T6 Indexable inserts mounted SKU: R080TM FAQ Which inserts fit this cutter? The R080TM accepts RDMW 0501 indexable inserts; compatible grades from Taegutec or equivalent suppliers can be used depending on the workpiece material. How is the insert secured? Insert clamping is by a Torx M2x4.2 screw, tightened with a T6 key, providing secure and repeatable retention for the insert pocket. What clamp size is required? The tool features a 10 mm shank diameter, suitable for standard 10 mm collets and holders for rigid clamping. Is this cutter suitable for finishing small pockets? Yes — the 8 mm cutting diameter and single cutting edge are optimised for precise finishing and predictable chip control in small features. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the precision of an 8 mm indexable‑insert drill combined with a compact 56 mm overall length for reliable, space‑saving machining; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Solid Drill U044TM – 8 mm compact indexable‑insert drill (Teknik Makina) The Solid Drill U044TM is a compact indexable‑insert drilling solution designed for precise 8 mm holemaking in confined setups and machine tools; suitable where repeatable hole quality and fast insert changes are required. 8 mm diameter for standard holemaking Compatible with XC-- 040104 indexable inserts 56 mm overall length for compact setups Consistent hole quality through indexable insert technology The combination of a fixed tool body and indexable inserts ensures repeatable results without the need for regrinding a solid tip. With an 8 mm nominal diameter and compatibility with XC-- 040104 inserts, the design separates cutting geometry from the shank, allowing rapid restoration of cutting performance simply by replacing an insert. For production environments this means reduced machine downtime and a predictable tool lifecycle, which improves throughput planning and process stability. Simplified inventory and fast changeovers By using standardised inserts, workshops can minimise the variety of spare tools carried in stock. The tool accepts inserts from ISCAR, which are widely available and compatible with established grade and geometry choices. This modular approach reduces procurement complexity and, when paired with indexed inserts, shortens changeover times compared with integral drills — a clear advantage in high‑mix, low‑volume operations. Compact geometry for limited tool access The 56 mm overall length and 38 mm shank length make this drill well suited to machines with restricted turret or spindle clearance. The 18 mm cutting length provides sufficient engagement for many common through‑hole and short‑reach applications while keeping overhang low to reduce deflection. In practice this compact geometry helps maintain concentricity and radial accuracy on small workpieces or when working close to fixtures. Light handling, stable setup With a tool mass of approximately 0.056 kg, the assembly is easy to handle during tool changes and mounting, reducing ergonomic strain for operators and speeding up manual tool change procedures. The short overhang and modest weight contribute to stable running characteristics, improving surface finish and hole tolerances, particularly on smaller lathes and compact machining centres. Cost efficiency and predictable maintenance Using indexable inserts decouples consumable cost from the tool body: the body remains in service while only the inserts are replaced. This lowers long‑term tooling expenditure and simplifies maintenance planning. The replacement process is straightforward and can be completed without specialist equipment, yielding a cost‑efficient route to consistent cutting performance and predictable operating costs over many cycles. Application scope and selection advice This indexable‑insert solution is aimed at metalworking and precision workshop environments where short‑reach drilling and quick insert exchange are priorities. The tool suits operations that value repeatability, fast maintenance and compact tool geometry. When selecting grades and geometries for the U044TM, match insert specification to the workpiece material and cutting parameters recommended by the insert manufacturer to achieve optimum life and finish. Speak to Metav Werkzeuge for tailored application advice and secure the Teknik Makina U044TM with rapid dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: U044TM SKU: U044TM Label: 8mm Vollbohrer XC-- 040104 L56mm Facts Diameter: 8 mm Overall length: 56 mm Cutting length: 18 mm Shank length: 38 mm Weight: 0.056 kg eClass: 21180201 Special features Product type: Solid drill (Vollbohrer) For indexable inserts: XC-- 040104 Suitable insert brand: ISCAR Designation: for XC-- 040104 Indexable Inserts UID: U044TM FAQ Is the drill compatible with standard indexable inserts? The answer is yes — the tool is specified for XC-- 040104 indexable inserts and is compatible with inserts supplied by ISCAR; the U044TM accepts those insert geometries for fast replacement. What are the key dimensions to check for machine fit? Check the 56 mm overall length, 38 mm shank length and 8 mm diameter when verifying tool clearance and turret or spindle compatibility for the U044TM solid drill. How does insert replacement affect downtime? Insert replacement on this indexable‑insert drill is quick and does not require regrinding; the process reduces downtime compared with reconditioning integral drills and keeps the tool body in service. Can the tool be used for deep drilling? This tool features an 18 mm cutting length, so it is optimised for short‑reach holes and applications where limited overhang is preferred rather than deep bore drilling. Which workshop environments benefit most from this design? The U044TM is particularly suited to precision workshops and small machining centres where compact tool geometry, repeatable hole quality and fast insert changes are valued. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine compact dimensions with reliable insert compatibility and straightforward mounting for efficient, repeatable drilling in production. The 8 mm drill body with a 56 mm overall length accepts XC-- 040104 indexable inserts and delivers a short, controllable cutting engagement; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. U060TM 8 mm drill body — for XC-- 040104 indexable inserts, 56 mm overall length (Teknik Makina) An U060TM 8 mm drill body engineered to carry XC-- 040104 indexable inserts, providing a compact tooling solution for precision drilling in machining centres 8 mm diameter for accurate guidance Compatible with XC-- 040104 indexable inserts 56 mm overall length for compact tooling 38 mm shank length for secure mounting Consistent, repeatable holemaking that preserves process stability The compact tool geometry is designed for stable chip formation and predictable tool life. With an 8 mm nominal diameter and an 18 mm cutting length, the body limits overhang and reduces deflection, which supports tighter tolerances and improved first-pass accuracy. This configuration is particularly beneficial in high-mix production where repeatability matters: shorter cutting engagement reduces vibration and makes clamping forces more predictable, which in turn lowers scrap rates and machine rework. Fast changeovers and rigid mounting to keep cycle times low A substantial 38 mm shank length ensures a secure fit in standard tool holders and reduces the need for repeated adjustments. The light overall weight (about 0.056 kg) and compact 56 mm overall length help to keep the centre of mass close to the spindle, improving balance and contributing to faster tool changes in automated setups. The result is reduced downtime and a simpler set-up routine, allowing machining centres to return to production more quickly after maintenance or tool replacement. Indexable inserts deliver flexibility and lower operating costs Designed for indexable inserts, the body accepts the XC-- 040104 insert family so that only the cutting insert is replaced when wear occurs, not the entire tool. This approach reduces consumable costs and minimises inventory complexity compared with solid-carbide alternatives. The compatibility with Ceratizit-specified inserts allows easy sourcing of replacement cutters and supports consistent cutting performance across batches — a practical choice where predictable economics and rapid return-to-cut are priorities. Reliable supply and integration into workshop workflows Manufactured by Teknik Makina and distributed through Metav’s network, the tool body integrates into established procurement and workshop processes. Metav’s logistics and selection reduce supplier overhead and ensure access to matching inserts and holders, helping to maintain production continuity. For buyers seeking a compact, insert-based drilling solution that balances precision and operational economy, this configuration aligns well with modern machining workflows and tool-management systems. For application advice or to secure the Teknik Makina U060TM drill body through Metav Werkzeuge, contact Metav Werkzeuge for tailored recommendations and ordering assistance via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: U060TM Label: 8mm Vollbohrer XC-- 040104 L56mm Product type: Indexable insert drill body Eclass: 21180201 Specifications Diameter: 8 mm Overall length: 56 mm Cutting length: 18 mm Shank length: 38 mm Weight: 0.056 kg Compatibility / Features Compatible inserts: XC-- 040104 Compatible insert manufacturer: Ceratizit Manufacturer: Teknik Makina SKU/UID: U060TM FAQ Which inserts fit this drill body? The body is designed to accept XC-- 040104 indexable inserts; replacements from Ceratizit that conform to that designation are suitable for the U060TM tool body. What are the overall and cutting lengths? Overall length is 56 mm and the cutting length is 18 mm, values which limit overhang and control cutting engagement for improved hole accuracy. Is the shank suitable for standard tool holders? The 38 mm shank length provides a secure clamping length for common holders and reduces the need for extended clamping adapters in compact setups. Can this tool be used across different CNC machines? The body is intended for indexable-insert drilling operations in machining centres and can be integrated where holder interfaces match the tool shank and rigidity requirements. What is the advantage of using an insert body versus a solid drill? Indexable systems allow replacement of only the worn insert, lowering consumable costs and enabling rapid changeovers compared with replacing whole solid-carbide drills. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, metric fastening that combines a precise M5 thread, a low-profile 12 mm overall length and compatibility with common assembly tools for reliable shim and U-plate clamping; order directly via Metav Werkzeuge or consult the team for detailed application advice Screw for Shim (TC095TM) — M5 thread, 12 mm overall length, Teknik Makina The Screw for Shim is a dedicated fastening solution designed for secure attachment of U-plates and shims in workshop and light industrial applications M5 thread for secure clamping 12 mm overall length for low profile fit 9.5 mm head diameter for stable seating Reliable metric thread for consistent clamping results The threaded design with a M5 thread provides a predictable load-bearing capacity and repeatable torque response, making this fastener suitable where joint stability matters. The combination of M5 thread and a controlled head diameter ensures secure seating in shims and U-plate assemblies, reducing the risk of loosening under vibration. Specified as TC095TM, this part is intended for straightforward integration in production and maintenance workflows where metric fastenings are standardised Compact form factor that saves space and simplifies assembly With an overall length of 12 mm and a head diameter of 9.5 mm, the component keeps protrusion to a minimum and helps maintain neat, space-saving assemblies. The short length reduces interference with adjacent parts and speeds up handling during installation. Designed for use with an Allen key 3 mm, the fixing permits quick, tool-based tightening with common hex keys, streamlining fitting procedures on jigs, fixtures and mounting plates Clear specifications for procurement and workshop planning Key measurable attributes are presented for easy comparison and inventory management: Diameter 9.5 mm, Thread M5, Overall length 12 mm and Weight 0.1 kg. These values support purchasing decisions and ensure compatibility with existing shims and U-plate configurations. Supplied by Teknik Makina and stocked via Metav Werkzeuge, the item is positioned as a pragmatic choice where reliable metric fastenings are required Contact Metav Werkzeuge today for order placement or application guidance on Teknik Makina fastenings such as TC095TM; assistance and local supply details are available from Metav Werkzeuge in Emmerich Technical Data Article number: TC095TM Manufacturer: Teknik Makina Designation: Screw for Shim Facts Diameter: 9.5 mm Thread: M5 Overall length: 12 mm Weight: 0.1 kg Special features Fastening screw for U-plate / shim Compatible with Allen key 3 mm ECLASS: 21189290 FAQ What thread size does this screw use? The screw uses an M5 thread, specified for reliable metric fastening in shim and U-plate applications and identified as TC095TM by Teknik Makina. Is the screw suitable for U-plates and shims? Yes, the Screw for Shim (TC095TM) is designed specifically for securing shims and U-plate fittings with a stable head diameter and short overall length. Which tool is required for installation? Installation requires an Allen key size 3 mm, enabling fast and repeatable tightening with standard hex keys. What are the core dimensions to check for fitment? Key dimensions to verify are 9.5 mm head diameter, M5 thread, and 12 mm overall length for correct seating and clearance in assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines internal coolant, a 20 mm shank and cross-compatible insert mounting for efficient thread milling across multiple insert sizes; order the tool via Metav Werkzeuge or consult our specialists for setup recommendations. Thread milling cutter DC201TM — for S12, S14, S21, S30 and S40 indexable inserts, 9.5 mm Ø A thread milling cutter DC201TM engineered for precision thread production in CNC and milling operations, compatible with a range of indexable inserts and designed for stable clamping and controlled coolant feed. Internal coolant for reliable cooling 20 mm shank for secure machine mounting Compatible with S12–S40 indexable inserts 9.5 mm nominal cutting diameter Consistent machining quality with built-in coolant control The DC201TM is devised for steady thermal management during thread generation: the internal coolant channel supplies coolant directly to the cutting zone, reducing heat build-up and extending insert life. With a 9.5 mm nominal cutting diameter and a robust 85 mm overall length, the tool balances rigidity and accessibility for common threading tasks. The design benefits shops machining medium to high-strength materials where temperature control and repeatable chip evacuation noticeably improve process stability. This results in fewer rejects and longer tool cycles — a clear operational advantage for production-focused workshops. Reduced downtime through standardised inserts and rapid clamping The indexable system accepts S12 through S40 sizes, enabling flexible adaptation to thread profiles and wear stages. Fast and reliable clamping is achieved by the retained Torx screw M2.5x5.5 and the matching T8 key, which together allow quick insert changes and minimal set-up time. The 20 mm shank provides a stable interface with common toolholders, improving concentricity and reducing vibration. These attributes translate into measurable efficiency: shorter tool-change intervals, predictable maintenance, and a clearer return on machining hours when compared with solid-thread solutions. Workshop-ready construction for repetitive production Built for continuous use in industrial environments, the cutter’s geometry and mounting specifications focus on process security and operator convenience. Compatibility across several insert formats reduces inventory complexity, while the 20 mm shank and standardised fixing hardware simplify fixture planning. The combination of a compact 9.5 mm cutting diameter and an 85 mm overall length makes the tool suitable for tight component geometries without compromising stability. For operations prioritising throughput, the cutter offers a pragmatic balance of precision, flexibility and straightforward serviceability. For deployment advice or to arrange a tailored technical recommendation for Teknik Makina’s DC201TM, contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com — our consultants will assist with mounting and process optimisation Technical data Article number: DC201TM Manufacturer: Teknik Makina Shank diameter: 20 mm Cutting diameter: 9.5 mm Overall length: 85 mm Torx screw: M2.5x5.5 Torx key size: T8 EClass: 21180805 ETIM: EC011860 Features Internal coolant: yes Compatible inserts: S12, S14, S21, S30, S40 Suitable for indexable insert thread milling Robust construction for CNC use FAQ What insert sizes fit this thread milling cutter? The cutter accepts S12, S14, S21, S30 and S40 indexable inserts, enabling flexible selection of insert geometry for different thread forms. Is coolant supplied through the tool? Yes — the tool features internal coolant, which directs cutting fluid to the cutting edge to reduce heat and improve chip control. What shank diameter is required for mounting? A 20 mm shank diameter is specified for stable clamping and compatibility with standard toolholders. Which fastening hardware is used for insert retention? Insert retention uses a Torx screw (M2.5x5.5) secured with a T8 key for rapid and reliable insert changes. Can this cutter be used for high-production CNC threading? The cutter is designed for industrial CNC applications where repeatability and reduced downtime are priorities, thanks to its insert system and coolant provision. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine secure clamping with broad insert compatibility to maintain consistent thread quality and reduce tool change downtime. Order the tool via Metav Werkzeuge or consult our machining experts for process integration. Thread milling cutter DC202TM — 9.9 mm diameter, 20 mm shank (Teknik Makina) The Thread milling cutter DC202TM is a precision CNC tool intended for thread milling with indexable inserts across a range of insert sizes, suitable for flexible workshop and production use. Compatible with S12 to S40 indexable inserts Precise 9.9 mm diameter for accurate thread forms 20 mm shank for stable clamping in tool holders Torx M2.5x5.5 fixing screw with T8 key Consistent thread geometry through insert versatility The cutter delivers repeatable thread profiles by combining a compact cutting head with proven insert standards. The 9.9 mm diameter provides a predictable cutting footprint, while the acceptance of indexable inserts enables rapid restoration of cutting edges without the need for full-tool replacement. For shops that value uptime, this approach reduces overall tooling costs and simplifies inventory management by allowing a single holder to work with several insert grades and geometries. The DC202TM is therefore well suited to medium-duty thread milling operations where consistency matters. Stable clamping and rapid insert changes for productive cycles A robust 20 mm shank gives the milling tool secure seating and reduces runout, which directly improves surface finish and concentricity of the machined thread. Insert retention is managed via a Torx M2.5x5.5 fixing screw secured with a T8 key, enabling quick, tool-assisted insert changes with consistent torque. The mechanical simplicity of this fastening system supports predictable clamping force and reduces the risk of insert movement under load. Fewer handling steps and reduced set-up time translate into shorter cycle times and improved overall process reliability. Workshop-friendly design that supports flexible production With an 85 mm overall length, the tool balances accessibility in confined setups with sufficient reach for a wide range of CNC applications. Classification data such as eClass 21180805 and ETIM EC011860 reference its placement in cutting-tool taxonomies, helping procurement and maintenance teams to match the tool with existing systems and documentation. The cutter’s compatibility with S12, S14, S21, S30 and S40 indexable inserts makes it a practical choice for suppliers and contract manufacturers seeking a single milling solution that covers multiple thread types and material mixes while keeping inventory lean. Discuss machining requirements with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fitment, delivery options and insert recommendations for the Teknik Makina DC202TM thread milling cutter Technical data Article number: DC202TM Manufacturer: Teknik Makina eClass: 21180805 ETIM: EC011860 Facts Diameter: 9.9 mm Overall length: 85 mm Shank diameter (aufnahme): 20 mm Special features Compatible with S12, S14, S21, S30 and S40 indexable inserts Torx screw: M2.5x5.5 Torx key: T8 Intended for thread milling operations FAQ Which insert sizes fit this cutter? The cutter accepts S12, S14, S21, S30 and S40 indexable inserts, enabling selection of the appropriate insert geometry for the required thread form and material. Is the shank diameter suitable for standard tool holders? Yes — the 20 mm shank diameter matches common collet and hydraulic holder sizes, providing secure clamping for the DC202TM milling tool. How are inserts secured and serviced? Inserts are fastened with a Torx M2.5x5.5 screw using a T8 key, allowing quick, repeatable insert changes with standard workshop tools. What advantages do indexable inserts bring to thread milling? Indexable inserts permit fast edge renewal without discarding the whole tool, reducing downtime and lowering tooling costs while maintaining consistent thread geometry. Is the DC202TM suitable for high-volume production? Its combination of a stable 20 mm shank and broad insert compatibility makes the DC202TM by Teknik Makina appropriate for many production environments where regular tool changes and predictable results are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a precise fit, straightforward maintenance and assured compatibility with the 90–130 CCMT 09T3 boring tool; the cartridge reduces downtime and supports consistent machining results. Order the replacement cartridge directly via Metav Werkzeuge or consult its specialists for supply and compatibility advice. Cartridge KR112TM — Cartridge for Boring Tool 90–130 CCMT 09T3 by Teknik Makina The Cartridge KR112TM is a replacement cartridge for the boring tool 90–130 CCMT 09T3, intended for fast insert changes and reliable clamping in workshop and production settings *Precision fit for 90–130 CCMT 09T3 *Durable construction by Teknik Makina *Easy-to-replace cartridge design Reduce set-up time with a quick-change cartridge The Cartridge KR112TM is designed to speed tool changes through a quick change interface that keeps set-up interruptions minimal. By holding the CCMT 09T3 insert securely, the cartridge enables rapid replacement of worn edges without full tool reassembly, which translates into measurable reductions in downtime and more efficient shift planning. For production environments where machine availability matters, the simplified exchange procedure supports higher output without compromising process control. Maintain machining accuracy through a precision fit A stable clamping solution delivers repeatable results: the cartridge’s precision fit and firm insert seating reduce micro-movement under cut, improving repeatability and surface finish consistency. Less vibration and a steady cutting edge position mean fewer scrapped parts and greater predictability for tolerance-critical operations. Even where operators have limited experience, a well-engineered cartridge supports consistent machining quality across batches. Ensure compatibility and straightforward inventory control Specifically matched to the 90–130 boring tool range for CCMT 09T3 inserts, the cartridge provides clear interchangeability for planned maintenance and spare-part stocking. Sourced from Teknik Makina, the component is intended as a reliable replacement part to maintain tool performance and uptime. The design supports efficient servicing routines and reduces the complexity of spare-part lists, helping workshops streamline procurement and keep machines running. For assured compatibility and prompt supply of the Teknik Makina Cartridge KR112TM for the 90–130 CCMT 09T3 boring tool, contact Metav Werkzeuge — specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on stock and delivery Technical Data Article number: KR112TM Manufacturer: Teknik Makina Product name: Cartridge Facts Suitable for: Boring Tool 90–130 CCMT 09T3 SKU / UID: KR112TM Special features Replacement cartridge for CCMT 09T3 insert holders Compatible with 90–130 mm boring tool range FAQ What machines is this cartridge compatible with? The cartridge is compatible with the boring tool 90–130 CCMT 09T3 and is intended for use with holders that accept CCMT 09T3 inserts. Can CCMT 09T3 inserts be mounted in this cartridge? Yes — the Cartridge KR112TM is designed to accept CCMT 09T3 inserts and to provide secure clamping for standard insert geometries. Is this cartridge a direct replacement part from Teknik Makina? The Cartridge KR112TM is supplied for the 90–130 CCMT 09T3 boring tool and is a replacement component from Teknik Makina for users requiring matching fit and function. How does the cartridge affect maintenance and spare parts management? Using the cartridge streamlines maintenance by enabling quick insert swaps and reduces inventory complexity, as the KR112TM is a defined spare for the 90–130 CCMT 09T3 tool range. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, precision toolholder that combines secure clamping, internal coolant and a space-saving head for improved access in confined turning operations. Rely on Teknik Cutting Tools’ robust design for consistent surface finish and reduced setup time — order through Metav Werkzeuge or speak to a consultant for tailored guidance. SVJBL 1010 Clamping Holder — SVJB for VBMT Indexable Inserts, left-hand with internal coolant (Teknik Makina) The SVJBL 1010 is a left-hand clamping holder engineered for turning applications with VBMT 1103 indexable inserts, offering internal coolant routing and a compact head for tight bores and interrupted cuts. Left-hand orientation for internal turning Internal coolant for improved chip evacuation Secure clamping for VBMT 1103 inserts Compact head: 12 mm width Precision clamping that stabilises tool life and finish The holder delivers consistent clamping force through a proven wedge design that secures VBMT 1103 inserts, reducing micro‑movement during engagement. This precision clamping reduces chatter and extends insert life, which translates into fewer interruptions for regrinding or replacement. For operations where repeatable geometry is vital, this toolholder offers a straightforward, measurable improvement in component consistency and cycle‑time reliability. Integrated coolant to support high-quality chip control Built‑in internal coolant directs cutting fluid close to the cutting edge, improving chip evacuation and cooling the insert pocket. For materials prone to long, stringy chips or thermal sensitivity, targeted cooling reduces heat build-up and helps maintain cutting edge integrity. The result is more predictable tool wear and a lower risk of built-up edge, both of which benefit process stability and surface quality in medium to heavy turning tasks. Space-saving geometry for access and rigidity A compact head with a 12 mm cutting‑head width and overall length of 110 mm provides better access in restricted bores and multi‑tool turrets. The modest mass (approx. 0.097 kg) minimises centrifugal forces on long overhangs while retaining sufficient stiffness for stable cutting. This geometry is particularly advantageous for workshops aiming to consolidate fixtures and reduce the number of specialised holders required for tight‑radius jobs. Simple assembly and quick service routines Maintenance and insert changes are straightforward: the clamping screw is supplied as M2.5x6.5 and is operated with a T8 Torx key, enabling fast, repeatable re‑clamping without specialised tooling. The ISO designation SVJBL 1010 reflects compatibility and eases inventory management across production lines. Reduced downtime from quick interchange procedures supports leaner workflows and predictable shift handovers. Compatibility and application scope for reliable performance Designed for VBMT 1103 indexable inserts and matched to J11‑IK bore bars, the holder features a cutting angle of 93° and a cutting height of 30 mm, making it suitable for many standard turning tasks where a left‑hand orientation is required. The holder’s 10 mm body width and compact profile suit operations where both reach and rigidity are necessary without compromising tool life or part quality. For reliable left‑hand turning with internal coolant, contact Metav Werkzeuge for product selection advice or to request the Teknik Cutting Tools SVJBL 1010 through our Emmerich distribution; our consultants can confirm suitability for specific applications Technical data Article number: AP550TM Manufacturer: Teknik Makina Designation (EN): SVJB for VBMT Indexable Inserts ISO designation: SVJBL 1010 SKU: AP550TM Facts Cutting height: 30 mm Head width: 12 mm Holder width: 10 mm Clamp height: 10 mm Overall length: 110 mm Weight: 0.097 kg Cutting angle: 93° Cutting direction: left Special features Internal coolant supply For VBMT 1103 indexable inserts Torx screw M2.5x6.5 Operated with Torx key T8 Compatible with bore bar J11-IK FAQ Which inserts fit this holder? The holder accepts VBMT 1103 indexable inserts; the clamping geometry is matched to that insert form for secure seating and repeatable cutting. Is the coolant routed to the cutting edge? Yes, the SVJBL 1010 features internal coolant routing designed to deliver fluid close to the insert‑edge for improved chip control. Can this holder be used for right‑hand turning? This version is specified for left‑hand cutting; for right‑hand operations, a corresponding right‑hand holder is recommended. What tools are required for insert changes? Insert retention uses a Torx screw M2.5x6.5, operated with a T8 key, allowing fast and repeatable maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of precise tool geometry, reliable insert compatibility and straightforward handling for reduced setup time and consistent cycle results. The compact design with an 8 mm shank and 100 mm overall length supports small‑diameter turn and bore operations while keeping changeover fast. Order via Metav Werkzeuge or consult their specialists for application advice and delivery from Emmerich. K230TM Boring Bar (S06H SCLCL) — Left‑hand, for CC--0602 inserts by Teknik Makina A K230TM boring bar for left‑hand machining, engineered to accept CC--0602 indexable inserts and to perform in confined toolposts and small bores. Left‑hand cutting orientation Compatible with CC-- 0602 inserts 8 mm shank diameter 100 mm overall length 95° cutting angle Stable small‑diameter performance for predictable results The compact design delivers high rigidity in applications where stability is critical. With an 8 mm shank and a nominal diameter 9 mm, the toolholder reduces deflection in constrained set‑ups, which improves dimensional repeatability on serial parts. The ISO designation S06H SCLCL denotes a standard interface that suits typical clamp systems, allowing secure mounting and predictable geometry. As a result, machining tolerances can be achieved more consistently and scrap rates are lowered, supporting efficient production cycles. Faster insert changes and controlled cutting behaviour Thanks to compatibility with CC--0602 indexable inserts, insert replacement is rapid and repeatable, reducing downtime and tooling consumption. The 95° cutting angle and cutting height 25 mm ensure the insert seats at the intended geometry, providing consistent chip formation and tool life under stable cutting conditions. This specification proves advantageous when machining a range of steels and other common workshop materials using small‑diameter toolholders, since predictable edge engagement minimises rework and tool‑related variability. Compact handling that supports workshop flexibility At only 100 mm overall length and a weight of 0.052 kg, the bar is easy to position and manoeuvre during set‑up or changeover, which helps to speed internal operations in busy shops. The left‑hand cut orientation expands capability for specific turning sequences and complements right‑hand counterparts within a tooling portfolio. Supplied with the ISO toolholder form and a clamp designation suited to module 06, the component integrates into standard lathe toolposts without additional adaptation, improving throughput for small‑series manufacturing and prototype tasks. For application guidance on this Teknik Makina K230TM boring bar and fast supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: K230TM Manufacturer: Teknik Makina Product designation ISO: S06H SCLCL Short description EN: SCLC for CC-- Indexable Inserts Cutting direction: left Facts Shank diameter: 8 mm Cutting height: 25 mm Weight: 0.052 kg Diameter: 9 Overall length: 100 mm Cutting angle: 95° Special features Compatible inserts: CC-- 0602 Clamp designation: 06 Suitable for indexable inserts: CC-- 0602 Story trigger: bohrstange FAQ Which inserts fit this toolholder? The K230TM accepts CC--0602 indexable inserts; the geometry and seat height are matched to this insert size for consistent cutting performance. Is the bar suitable for small‑diameter internal machining? Yes. With an 8 mm shank and compact form, the bar is designed for confined toolposts and small‑diameter internal operations where rigidity and clearance are required. What is the cutting angle and why does it matter? The tool features a 95° cutting angle, which helps control edge engagement and chip flow, supporting stable cutting and repeatable results in turning and boring tasks. How long and how heavy is the tool? Overall length is 100 mm and the weight is 0.052 kg, which makes handling and set‑up straightforward in workshop environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Comprehensive Technical Specifications: Order Number: KA250TM Item: Boring Bar usable with DC-- 0702 Indexable Inserts Brand: Teknik Makina ISO Code: A10J SDUCL 07 Numbers and Data: Diameter: 16mm Weight: 0.12kg Total length: 125mm Cutting Height: 25mm Additional Informattion Cutting Direction: links Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Besonderheiten Bohrstange mit Innenkühlung passend für DC-- 0702 Wendeplatten Schnittwinkel 93° Durchmesser: 16mm Schnittrichtung: rechts Bohrstange A10J SDUCR 07mit Innenkühlungvon Teknik Makina für alle ISO Wendeschneidplatten DC-- 0702. Hier erhalten Sie die passenden Wendeplatten. Dank der exakten Verarbeitung ist ein perfekter Plattensitz gewährleistet, sodass ein Verrutschen unmöglich ist. Die Wendeschneidplatten wird fest auf dem Bohrstange verschraubt. Die Schrauben lassen sich schnell lösen. So können die Wendeplatten schnell ausgetauscht und die Bearbeitung weitergeführt werden. Ein Schnittwinkel von 93° sichert die Erstellung präziser Oberflächen. Dieses Tool hat eine interne Kühlung. An der Schneidkante wird beim Zerspanen Wärme erzeugt. Diese Wärme wird entweder durch die abgezogenen Späne oder durch den Schaft des Werkzeugs abgeführt und im Material selbst festgehalten. Hierdurch wird eine Kühlung zumeist unvermeidlich. Kühlmaßnahmen haben bedeutenden Einfluss auf die Entfernung der Späne, die Güte der Zerspanung und die Dauerhaftigkeit des Werkzeugs. Werkzeuge mit Innenkühlung verfügen über durchgehende Kanäle, in welchen das Kühlschmiermittel an das zu bearbeitende Material leiten. Unter dem Einfluss des Kühlmitteldrucks werden die erhitzten Späne heruntergekühlt und aus der Bohrung hinausgespült. Hierdurch entsteht ein Schmierfilm zwischen Werkzeug und Material, der die Reibung minimiert, die Temperatur senkt und die Standzeiten erhöht. Werkzeuge mit Innenkühlung eignen sich auch für sehr tiefe Bohrungen. Hier finden Sie den kompletten Katalog von Teknik Makina als PDF zum Download. Technische Daten: Bezeichnung: Bohrstange ISO Bezeichnung: A10J SDUCR 07 Hersteller: Teknik Makina Bestellnummer: KA120TM mit Innenkühlung passend für DC-- 0702 Wendeplatten Durchmesser: 16mm Schnittwinkel 93° Gesamtlänge: 125mm Schnitthöhe: 25mm Schnittrichtung: rechts Artikelgewicht: 0,12kg Jetzt Bohrstange für DC-- 0702 Wendeschneidplatten bestellen. Teknik Makina, der Hersteller in einigen Worten: Teknik Makina wurde 1987 in der Türkei gegründet und startete 1994 mit der Herstellung von Schneidwerkzeugen. Im Jahr 2015 wurde die Produktion in ein modernes Fabrikgebäude im vierten Industriegebiet von Konya verlegt, wo mehr als 5.000 verschiedene Werkzeuge gefertigt werden. Mit 40 Produktionslinien, die gleichzeitig in mehreren Kategorien arbeiten, ist das Unternehmen gut aufgestellt. Die Produktions- und Designteams sind bestens ausgebildet und nach ISO 9001:2015 zertifiziert, um Ihnen prozesssichere Dienstleistungen bieten zu können. Angaben zur Produktsicherheit für das Werkzeug 16mm Bohrstange für DC-- 0702 Wendeschneidplatten mit der Bestellnummer .KA120TM Hersteller Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Verantwortliche Person Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com

Detailed Technical Data: Order Number: AP382TM Item: Boring Bar usable with WNMG 0604 Indexable Inserts Brand: Teknik Makina ISO Code: A20R PWLNR 06 Numbers and Data: Diameter: 25mm Weight: 0.471kg Total length: 200mm Cutting Height: 40mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: AP362TM Item: Boring Bar usable with WNMG 0804 Indexable Inserts Brand: Teknik Makina ISO Code: A32T PWLNR 08 Structural Details: Diameter: 40mm Weight: 1.764kg Total length: 300mm Cutting Height: 60mm Additional Informattion Cutting Direction: rechts Cooling Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Characteristics: Order Number: UA12TM Item: Adaptor for Indexable Drill usable with Brand: Teknik Makina Metric Information: Total length: 47mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Comprehensive Technical Specifications: Order Number: 2ALLENTM Item: Allen Screw usable with Brand: Teknik Makina Metric Information: Weight: 0.1kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com