Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of fast material removal, straightforward insert replacement and rigid clamping for uninterrupted milling performance; order the cutter body directly via Metav Werkzeuge or request application advice for integration into existing CNC setups. Round Insert Face Mill by Teknik Makina – 80 mm, for RPMW 1606 indexable inserts The Round Insert Face Mill is a cutter body engineered for high-efficiency face milling using RPMW 1606 indexable inserts across industrial CNC operations. 80 mm cutting diameter for larger engagement 6 cutting edges for continuous productivity Designed for RPMW 1606 indexable inserts Faster metal removal with reliable stability The design delivers a high material removal rate through an 80 mm cutting diameter combined with 6 cutting edges, which spreads the load and maintains consistent chip evacuation. This results in steadier cutting forces and improved surface finish compared with single-edge solutions. Compatibility with RPMW 1606 indexable inserts allows selection of grade and geometry optimised for aluminium, steel or more demanding alloys, so cycle times are reduced while tool life is extended. Secure clamping and minimal downtime Quick insert changes are enabled by the standard M5x12 Torx screws and T20 key interface, which are familiar to workshop technicians and reduce changeover time. The cutter mounts on a rigid shank with 27 mm arbor diameter for axial stability and reduced vibration, thereby protecting insert edges and machine spindle. Clear mechanical fixing means shorter setup routines and predictable torque requirements for repeatable clamping. Broad compatibility for workshop flexibility Designed to accept common supplier inserts, the tool is compatible with Korloy RPMW 1606 indexable inserts, reducing the need to stock multiple insert types. With a 50 mm overall height the body offers solid support for medium-depth face milling in general workshop and production environments. Manufactured by Teknik Cutting Tools and supplied under the Teknik Makina designation, the cutter body suits shops aiming to streamline tooling inventories without sacrificing machining performance. For tailored application advice and immediate availability of the Teknik Makina round face mill, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T718TM Manufacturer: Teknik Makina ECLASS: 21180902 ETIM: EC011860 SKU: T718TM Facts Diameter: 80 mm Overall height: 50 mm Number of cutting edges: 6 Arbor (shank) diameter: 27 mm Torx key size: T20 Torx screw: M5x12 Design & compatibility For RPMW 1606 indexable inserts Compatible with Korloy indexable inserts Indexable face mill body for CNC milling Suitable for industrial workshop applications FAQ Which insert type is required for this cutter body? The Round Insert Face Mill accepts RPMW 1606 indexable inserts; Korloy grades are explicitly compatible and commonly used with this cutter body (Teknik Makina, SKU T718TM). How many cutting edges does the tool provide and what is the benefit? This face mill has 6 cutting edges, which allows continuous cutting with balanced load distribution and improved throughput compared with fewer-edged designs. What fastening hardware is used for the inserts? Inserts are secured with M5x12 Torx screws tightened with a T20 key, providing a reliable and repeatable clamping method. What arbor size is required for mounting the cutter body? The tool requires a mounting interface with a 27 mm shank diameter to ensure correct seating and minimise runout during operation. For which workshop applications is this cutter body intended? The cutter body is intended for general face milling tasks in production and maintenance shops where RPMW 1606 indexable inserts are suitable, offering a balance of versatility and productivity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust stability and a modular insert system for reliable milling operations; the combination of an Ø 80 mm cutting diameter and secure Torx clamping minimises downtime and delivers consistent results. Order the round face mill directly via Metav Werkzeuge or consult our specialists for application advice. Round face mill T668TM — indexable-insert face mill, Ø 80 mm, 7 cutters — Teknik Makina Round face mill T668TM for precision machining and versatile insert use across production and workshop milling applications Ø 80 mm cutting diameter 7 cutting edges for efficient material removal For RDMT 12T3 indexable inserts 27 mm shank diameter for secure mounting Compatible with Palbit inserts Stable mounting and controlled cutting performance The design centres on mechanical stability: a 27 mm shank and compact overall length 50 mm reduce overhang and vibration, helping to achieve repeatable surface quality in serial production. The cutter’s clamping concept uses M4x10 Torx screws (Torx key T15) and an additional M3.5 locking screw, which together ensure reliable insert retention and minimise micro-movements during cutting. Reduced movement translates into fewer rejects and less rework, improving shop-floor efficiency. Modular insert system for fast tool change and uptime By accepting RDMT 12T3 indexable inserts, this face mill offers a practical balance between insert economy and cutting capacity. The seven-edge configuration gives multiple effective cutters per revolution, so wear can be distributed and insert life extended. Compatibility with Palbit inserts provides access to a broad range of geometries and grades, enabling flexible adaptation to varied machining tasks and shorter tool-change cycles — a direct saving on operating time. Practical assembly, maintenance and workshop ergonomics Maintenance is straightforward thanks to standardised fastening: the Torx T15 engagement and the listed screw sizes simplify torque procedures and spare-part planning. The cutter’s weight of 1.181 kg and its compact dimensions make handling and tool set-up easier at the machine. Clear mechanical features reduce setup variation and support predictable machining parameters, which benefits process planning and tool management in both small workshops and larger production cells. Designed for reliability in production environments Engineered for consistent performance, the tool combines a robust body with proven indexable-insert technology to suit repetitive milling tasks. The compact configuration and secure fastenings support stable chip formation and repeatable cycles. Backed by Metav’s quality filter in Emmerich and broad product availability, the face mill is positioned as a dependable option for firms seeking a tried-and-tested cutting solution that integrates smoothly into existing tooling strategies. For tailored machining recommendations or to secure the Ø 80 mm face mill from Teknik Cutting Tools, contact Metav Werkzeuge for expert advice and reliable delivery from Emmerich. Technical data Article number: T668TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Product type: Indexable-insert face mill ECLASS: 21180902 ETIM: EC011860 Core dimensions Diameter: 80 mm Shank (clamping) diameter: 27 mm Number of cutting edges: 7 Overall length: 50 mm Weight: 1.181 kg Torx screw size: M4x10 Locking screw: M3.5 Features & compatibility For RDMT 12T3 indexable inserts Compatible with Palbit inserts Torx key required: T15 SKU: T668TM FAQ Which insert type fits this face mill? The cutter accepts RDMT 12T3 indexable inserts; compatibility with Palbit inserts expands the choice of grades and geometries. How many effective cutting edges does the tool use? The tool utilises 7 cutting edges, providing continuous engagement that helps spread wear and maintain cutting performance. What are the key mounting dimensions to check? Key dimensions are Ø 80 mm cutting diameter and 27 mm shank diameter; overall length is 50 mm for setup and clearance planning. Which screw and key sizes are specified for assembly? Assembly uses M4x10 Torx screws with a T15 key and an M3.5 locking screw for insert retention. Is this tool suitable for short tool overhang setups? The compact 50 mm overall length and 27 mm shank support reduced overhang configurations that favour stability in short-reach milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high material removal rate and secure clamping: the cutter’s 80 mm diameter with seven cutting edges increases productivity while the 27 mm shank ensures stable mounting on machining centres. Benefit from compatibility with the industry-standard RHKW 1204 inserts and order the round insert face mill directly via Metav Werkzeuge or ask our consultants if needed. Round Insert Face Mill for RHKW 1204 Indexable Inserts — 80 mm, 27 mm Shank (Teknik Makina) The Round Insert Face Mill is a compact indexable milling cutter engineered for efficient face and profile milling with RHKW 1204 indexable inserts. 80 mm diameter for versatile milling 27 mm shank for secure clamping Compatible with RHKW 1204 indexable inserts Seven cutting edges for high material removal High productivity through optimised cutter geometry The milling head delivers a measurable productivity gain thanks to its 80 mm diameter and seven cutting edges, which together reduce cycle times in roughing and semi-finishing passes. The tool body is balanced for stable rotation, and the cutter’s geometry is designed to distribute cutting forces evenly so chip evacuation remains consistent. By combining a larger cutting diameter with multiple cutting edges, the tool achieves a higher material removal rate without compromising surface integrity — an advantage for small-batch production and series work alike. Secure mounting and fast tool changes for reduced downtime Engineered for reliable clamping, the cutter features a 27 mm shank that provides a positive fit in standard toolholders and minimises runout. Fixing hardware includes a M3.5 clamp screw, M4x10 Torx screw and a T15 Torx key, enabling quick, repeatable insert changes and straightforward maintenance. The secure connection reduces vibration and tool deflection, which translates into longer insert life and fewer interruptions on the shop floor, supporting a steady production flow and predictable machine utilisation. Industry compatibility and practical handling in the workshop Designed for use with RHKW 1204 indexable inserts and compatible with inserts from Ingersoll, this cutter integrates smoothly into existing tooling suites that rely on round insert technology. With an overall length of 50 mm and a mass of 1.039 kg, the tool offers a compact footprint while providing sufficient inertia for stable cutting in many milling operations. The construction suits a wide range of machining tasks where indexable round cutters are preferred for their economy and straightforward reconditioning of cutting edges. Choose the Teknik Makina round insert face mill for consistent milling output — contact Metav Werkzeuge in Emmerich for tailored advice and prompt dispatch: +49 2822 7131930, info@metav-werkzeuge.com Technical data SKU: T615TM Name: Round insert face mill (Rundplattenfräser) Description: for RHKW 1204 Indexable Inserts Manufacturer: Teknik Makina Compatible insert manufacturer: Ingersoll eClass: 21180902 ETIM: EC011860 Facts Diameter: 80 mm Shank diameter: 27 mm Overall length: 50 mm Cutting edges: 7 Weight: 1.039 kg Special features Insert type: RHKW 1204 Clamp screw: M3.5 Torx screw: M4x10 Torx key: T15 Compatible with Ingersoll inserts FAQ Which insert type does this cutter accept? The cutter accepts RHKW 1204 indexable inserts; it is supplied as a round insert face mill compatible with that insert geometry. Is the tool compatible with Ingersoll inserts? Yes — the design is compatible with inserts from Ingersoll, enabling integration into existing toolsets that use that supplier’s RHKW 1204 inserts. What are the mounting dimensions required for the toolholder? The milling head uses a 27 mm shank, requiring a matching toolholder bore and secure clamping to ensure low runout and stable operation. Which fastening hardware is used for insert clamping? Insert clamping and retention use a M3.5 clamp screw together with an M4x10 Torx screw; a T15 Torx key is specified for assembly and maintenance. How heavy and long is the cutter assembly? The complete assembly has an overall length of 50 mm and a weight of 1.039 kg, providing a compact tool that balances rigidity with manageable handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid design, straightforward insert compatibility and quick clamping to maintain uninterrupted turning operations; order the tool directly through Metav Werkzeuge or consult the technical team for application-specific advice. Corner Turning Head T540TM – Toolholder for BDMT 1704 indexable inserts with 90° cutting angle A robust Corner Turning Head T540TM designed for external turning and facing tasks, optimised for use with BDMT 1704 indexable inserts and engineered for secure mounting in standard 27 mm toolholders. 90° cutting angle for standard turning Ø80 mm head diameter for rigid support 27 mm shank diameter for secure mounting Compatible with BDMT 1704 indexable inserts Torx M4x10 clamping screw, T15 key Stable geometry for repeatable turning results The toolhead’s 90° cutting angle and Ø80 mm head deliver an optimised geometry that improves rigidity during external turning operations. This stability reduces vibration and tool deflection, which in turn helps to maintain consistent surface finishes and extend insert life. The assembly is designed to integrate with common lathe tool shanks, offering the mechanical steadiness required for medium to heavy cutting tasks and predictable cycle times. Fast, secure clamping to cut downtime Insert retention is achieved with a Torx M4x10 clamping screw tightened with a T15 key, providing a positive and repeatable clamp force that keeps BDMT 1704 inserts seated accurately. The clear mechanical interface reduces changeover time and the risk of incorrect seating; combined with compatibility for Kyocera inserts, the head supports efficient workshop logistics and rapid tool replacement under production conditions. Compatibility and practical workshop benefits With a 27 mm shank, an overall length of 50 mm and a head weight of 1.165 kg, the unit is compact yet substantial enough to contribute to a stable cutting arrangement. Its specification for BDMT 1704 indexable inserts allows stocking of widely available insert grades for finishing or light roughing, simplifying procurement and inventory management. Designed for ease of handling, the toolhead provides tangible productivity gains with minimal adaptation to existing tooling systems. Contact Metav Werkzeuge for tailored tooling recommendations and reliable supply of the Teknik Makina Corner Turning Head T540TM — technical advice and order processing from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: T540TM Name: Corner turning head (Eckmesserkopf) Manufacturer: Teknik Makina Eclass: 21181015 Dimensions & performance Head diameter: 80 mm Shank diameter: 27 mm Overall length: 50 mm Cutting angle: 90° Weight: 1.165 kg Cutting edges: 7 Features & compatibility For BDMT 1704 indexable inserts Compatible with Kyocera inserts Clamping screw: Torx M4x10 Torx key: T15 FAQ Which insert type fits this turning head? The turning head accepts BDMT 1704 indexable inserts and is compatible with Kyocera-manufactured inserts of that designation. What are the key dimensions for mounting and setup? Shank diameter 27 mm, head diameter 80 mm, overall length 50 mm and weight 1.165 kg — suitable for standard 27 mm toolholders and compact lathe setups. How is the insert secured in the holder? A Torx M4x10 clamping screw secures the insert; the screw is tightened with a T15 Torx key for repeatable clamping force. Is this toolhead intended for finishing or heavier cuts? The 90° cutting geometry and sturdy head diameter provide rigidity suitable for reliable finishing and light to medium roughing, depending on insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise 90° geometry, a rigid Ø 80 mm body and a 27 mm clamping bore for dependable shoulder turning and reduced rework; order directly via Metav Werkzeuge or consult the team for application-specific setup. Corner Tool Head T695TM — 90° indexable turning head by Teknik Cutting Tools The Corner Tool Head is a compact turning head engineered for accurate shoulder profiling and external turning in CNC lathes, designed to accept standard indexable inserts and suit diverse production environments. 90° cutting geometry for square shoulders Ø 80 mm body for enhanced rigidity 27 mm clamping bore for secure mounting Robust 50 mm overall height for stable turning Consistent 90° geometry for accurate shoulder machining The tool head’s defining feature is its 90° cutting geometry, which delivers repeatable right-angle shoulders and consistent part profiles. This geometry reduces secondary operations because the component tolerance is achieved directly in the turning pass. By pairing the right insert grade with the head’s geometry, shops benefit from shorter cycle times and fewer set-ups, making the assembly line more efficient and predictable. The use of indexable inserts allows wear to be managed economically and keeps downtime low. Rigid, compact design that reduces vibration and extends insert life A robust Ø 80 mm body combined with a 27 mm clamping bore and 50 mm overall height gives the head high bending stiffness and vibration resistance. Increased rigidity translates into better surface finish and longer tool life for the insert, reducing scrap and rework. For operations where chatter or deflection would otherwise limit cutting parameters, this turning head enables higher feeds or depths of cut while maintaining dimensional stability and part quality. Practical handling and integration into production workflows The head is supplied with Torx fastenings (Torx T8 key; screw M2.5×5.5) for secure and rapid assembly and maintenance. Compatibility with common insert formats and major insert manufacturers such as Korloy ensures straightforward sourcing of cutting grades and geometries for specific materials. The turning head is therefore suitable for short runs and series production alike, offering a balance of precision and serviceability that supports busy workshop schedules. For application advice, tooling recommendations or to place an order for the Teknik Cutting Tools corner tool head T695TM, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or +49 2822 7131930 — assistance is available from the Emmerich team. Technical Data SKU: T695TM Designation: Corner tool head (Eckmesserkopf) Manufacturer: Teknik Makina Numbers / Core technical data Body diameter: 80 mm Overall height: 50 mm Clamping bore: 27 mm Cutting angle: 90° Cutting edges: 11 Special features / Versions Torx T8 fastening system Screw M2.5×5.5 Compatible with Korloy indexable inserts Suitable for shoulder and external turning FAQ Which insert formats fit this turning head? The turning head accepts standard indexable inserts from major manufacturers; compatibility is confirmed for inserts supplied by Korloy and similar product lines. Is the head suitable for heavy roughing cuts? The combination of a Ø 80 mm body and a 27 mm clamping bore provides elevated rigidity, allowing more aggressive cutting parameters than with slimmer holders, depending on machine and insert choice. What fastening tools are required for assembly and maintenance? Assembly and insert clamping use a Torx T8 key; the head is supplied with screws sized M2.5×5.5 for secure fixation. Can the head be used for fine finishing passes? Yes — the rigid design reduces vibration and supports fine feeds and shallow depths of cut for improved surface finish when paired with the appropriate insert geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision machining, robust indexable-insert compatibility and simple servicing for reliable T-slot production; order directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC064TM — 80 mm diameter, 10-flute cutter by Teknik Makina The T-slot cutter TKC064TM is a dedicated milling tool for creating and maintaining T-slots on metal components, designed for use on milling machines in production and workshop environments. 80 mm diameter for wide T-slots 10-flute geometry for stable cutting Compatible with SPMG 06 inserts 32 mm shank for rigid clamping High productivity through optimised geometry The TKC064TM combines an 80 mm diameter with a 10-flute layout to balance material removal and surface stability, which results in consistent cycle times and reduced rework. The cutter's profile and flute count are selected to limit vibration and ensure a uniform chip flow; this improves tool life and contributes to a predictable process window. For series machining, the design reduces interruptions and supports steady output in repetitive T-slot operations. Servicing and tooling that keep downtime low Designed for indexable inserts, the cutter accepts SPMG 06 style plates and is compatible with inserts from Taegutec, enabling quick replacement without the need for complex reconditioning. The fixing hardware uses a M2.2x5 Torx screw with a T7 key size, allowing fast access with common workshop tools. The modular insert system reduces maintenance time and gives flexibility to choose grades and geometries for specific materials or finishes, improving overall equipment effectiveness. Rigidity and precision for repeatable results A 32 mm shank ensures robust clamping and minimises deflection during heavy cuts, while the 45 mm effective cutting length provides sufficient engagement for most T-slot depths without compromising stiffness. The cutter's 8 mm cutting edge height offers a clear margin for insert support and consistent tooth engagement. These features combine to deliver repeatable slot profiles and tolerances that support downstream assembly and part interfacing. Contact Metav Werkzeuge for technical clarification, sample availability or assistance matching the TKC064TM to a specific production task — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application requirements and delivery options Technical data SKU: TKC064TM Manufacturer: Teknik Makina Diameter: 80 mm Number of flutes: 10 Shank diameter: 32 mm Effective cutting length: 45 mm Cutting edge height: 8 mm Cutting diameter at shank: 31.5 mm Overall length: 120 mm Weight: 0.995 kg For indexable inserts: SPMG 06 Compatible insert manufacturer: Taegutec Fixing screw: M2.2x5 Torx Torx key size: T7 Application: T-slot milling on milling machines FAQ What is the primary application of this cutter? The TKC064TM T-slot cutter is intended for machining and repairing T-slots in metal components on milling machines, providing stable profiles for fixtures and assemblies. Which inserts are recommended for the cutter? Indexable plates in the SPMG 06 format are suitable; the cutter is compatible with inserts offered by Taegutec and similar manufacturers. How is an insert secured and replaced? Inserts are held with an M2.2x5 Torx screw (Torx key T7); the screw system allows rapid insert changes and straightforward maintenance without specialised equipment. Is this cutter suitable for series production? Yes — the combination of a 32 mm shank for rigidity and a 10-flute design supports high repetitive accuracy and reduced vibration in series production environments. What is the product SKU for ordering and reference? Refer to SKU TKC064TM when enquiring about the T-slot cutter or ordering spare inserts and fastening hardware. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a combination of reliable compatibility with MGM 3C indexable inserts and the stability of a 32 mm shank for consistent T-slot production; the 80 mm cutter diameter and two cutting edges deliver efficient material removal while keeping setup and service straightforward. Order directly via Metav Werkzeuge or ask the consultants for detailed application advice. T-slot cutter – Ø 80 mm, 32 mm shank (Teknik Makina) The T-slot cutter is designed for precise T-slot milling with MGM 3C indexable inserts, suited to workshop tables and fixture machining. 80 mm diameter for wide T-slots Compatible with MGM 3C indexable inserts 32 mm shank for stable clamping High-capacity machining with measurable stability This milling head combines an Ø 80 mm cutting diameter with a 32 mm shank to deliver lateral stability during heavy engagement. The geometry is intended for the reproducible production of T-slots and similar profiles; the robust shank diameter reduces chatter and is suitable for standard collet or hydraulic chucks. Compatibility with established insert systems from Korloy ensures tooling replenishment is straightforward, while the round milling design supports smooth entry and exit at slot ends, resulting in predictable surface quality and dimensional control. Faster cycle times through efficient cutting geometry Equipped with 2 cutting edges and a cutting height of 3 mm, the tool is optimised for productive passes without undue compromise to finish. The use of indexable inserts allows rapid replacement when wear occurs, reducing machine downtime and lowering per-part costs over longer production runs. For operations that prioritise throughput, the combination of a large cutter diameter and effective chip evacuation makes this tool a cost-effective choice for repetitive T-slot work. Built for workshop durability and simple handling The cutter’s 120 mm total length and overall mass of 0.841 kg have been balanced to provide a compact yet robust assembly that is easy to handle during setup. Component tolerances are designed so that clamping forces from a 32 mm shank transmit securely into the spindle, preserving concentricity. The tool’s form supports routine inspections and predictable maintenance cycles, contributing to consistent results across multiple shifts without complex adjustments. Serviceability aligned with common workshop practice Insert clamping is secured with an M8 Torx screw and the specified service key is a 6 mm Allen type, enabling fast insert changes with standard workshop tools. The cutter accepts MGM 3C style inserts and is listed as compatible with Korloy insert grades, which simplifies procurement and tooling management. Together, these design choices reduce setup time and help maintain a regular production rhythm while keeping spare-parts logistics straightforward. Contact Metav Werkzeuge for tailored machining recommendations and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC302TM Name: T-slot cutter Manufacturer: Teknik Makina Brand SKU: TKC302TM For indexable inserts: MGM 3C Compatible insert manufacturer: Korloy Core data Diameter: 80 mm Shank diameter: 32 mm Number of cutting edges: 2 Cutting height: 3 mm Total length: 120 mm Weight: 0.841 kg Special features Secured with M8 Torx screw Service with 6 mm Allen key Round milling cutter design For T-slot and profile milling applications FAQ Which insert type is required for the tool? The cutter uses MGM 3C indexable inserts; insert replacement is straightforward and compatible inserts from Korloy are suitable for typical applications. What shank size is needed for secure clamping? A 32 mm shank diameter is specified to provide the required rigidity; standard 32 mm collets or chucks are recommended for clamping. How many cutting edges does the cutter have and what is the cutting height? The tool is fitted with 2 cutting edges and a 3 mm cutting height, balancing material removal rate with surface finish. Is the cutter suitable for heavy-duty T-slot machining? Yes, the combination of Ø 80 mm diameter and a 32 mm shank provides stability for demanding slot work while maintaining control over runout. What tools are needed for insert changes? Insert clamping uses an M8 Torx screw and is serviceable with a 6 mm Allen key for quick replacement on the shop floor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of an 80 mm diameter tool with five cutting edges delivers fast, consistent T-slot milling and reduces the number of passes required; benefit from secure clamping via a 28 mm shank and order directly through Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC322TM – 80 mm diameter, for MGMN 300 indexable inserts (Teknik Makina) A T-slot cutter TKC322TM engineered for precision T-slot milling with MGMN 300 indexable inserts in industrial and workshop CNC applications. 80 mm diameter for wide T-slots Designed for MGMN 300 indexable inserts 5 cutting edges for efficient material removal 28 mm shank for secure clamping High-capacity cutting that reduces cycle times The wide 80 mm diameter combined with 5 cutting edges allows larger material engagement per pass, shortening cycle times on repetitive T-slot operations. Using indexable inserts means the cutting edge geometry is defined by the insert rather than the body, so each insert change restores original performance without reconditioning the tool body. This setup suits batch production and ensures consistent slot profiles while keeping tool-change procedures simple and predictable. Stable mounting for improved surface finish and tool life A robust 28 mm shank and a compact 55 mm overall length provide excellent rigidity at the cutting zone, which reduces chatter and improves surface finish in T-slot profiles. The solid mounting geometry supports high feed rates while maintaining dimensional stability, translating into fewer rejected parts and longer service intervals. Stable clamping and the cutter’s mass distribution contribute to repeatable results across demanding milling cycles. Compatible insert system and practical workshop benefits The cutter accepts MGMN 300 insert types and is matched for common Korloy insert grades, enabling straightforward procurement and fast replacement. Indexable inserts mean worn edges are exchanged rapidly, offering efficient replacement and lower effective tooling costs per cutting edge. The compact design and standard interface suit a wide range of milling heads, making the tool a pragmatic choice for operations that value uptime and predictable manufacturing tolerances. For Teknik Makina quality with practical supply from Emmerich, contact Metav Werkzeuge for tailored advice and reliable provisioning: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC322TM Product type: T-slot cutter Manufacturer: Teknik Makina Label: 80mm T-Nut Fräser MGMN 300 L55mm Core data Diameter: 80 mm Overall length: 55 mm Shank diameter: 28 mm Cutting edges: 5 Cutting edge height: 3 mm Weight: 0.233 kg Thread: 16 Special features Compatible with MGMN 300 indexable inserts Matching insert manufacturer: Korloy SKU: TKC322TM ECLASS: 21180605 FAQ Which insert type is required for this cutter? The cutter is designed for MGMN 300 indexable inserts; Korloy grades are compatible with the TKC322TM configuration. What are the key dimensions to check for machine compatibility? Key dimensions are 80 mm diameter, 55 mm overall length and a 28 mm shank; these figures help determine holder and spindle suitability for the TKC322TM tool. How many cutting edges does the tool have and what is the advantage? The tool features 5 cutting edges, which increases material removal per revolution and allows longer cutting intervals between indexings on the TKC322TM. Is the cutter suitable for high-feed industrial milling? Yes; the combination of a 28 mm shank and short overall length supports high-feed conditions with reduced vibration, making the TKC322TM suitable for industrial milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust cutting capacity and fast insert changes to keep slotting operations efficient and repeatable; the 80 mm cutting diameter and secure 22 mm shank provide stable engagement and consistent results. Order directly via Metav Werkzeuge or request technical advice for integration into production. T-slot cutter for RD-- 1003 indexable inserts — 80 mm diameter, L 120 mm (Teknik Makina) A T-slot cutter for RD-- 1003 indexable inserts engineered for precise slotting in industrial milling and workshop applications. 80 mm cutting diameter 7 cutting edges for smooth engagement Compatible with RD-- 1003 indexable inserts 22 mm shank for secure clamping Faster, more consistent slotting for serial production The combination of an 80 mm cutting diameter and 7 cutting edges reduces the number of passes required to produce a T-slot, increasing throughput while maintaining dimensional tolerances. Higher engagement per revolution delivers a more even load distribution across the cutting edges, which lowers peak forces and helps to stabilise the machining process. This results in shorter cycle times and improved batch reproducibility for serial production runs. Quick insert changes reduce machine downtime Designed around the RD-- 1003 indexable inserts, the cutter enables rapid blade replacement without regrinding, so wear is managed by swap-out rather than complex reconditioning. Fast securing with a T15 Torx driver and the specified M3.5x8.5 fastening screw keeps changeover times predictable and short. The system approach improves tool life economics and simplifies tool inventory management in production environments. Secure clamping for repeatable accuracy A 22 mm shank and an overall length of L 120 mm give the tool the rigidity needed for stable slot formation, while the balanced geometry mitigates vibration and runout. Stable clamping reduces positional drift of the cutter head, which in turn ensures repeatable slot dimensions and cleaner slot walls. The modest mass of the assembly supports controlled acceleration and deceleration in CNC cycles without compromising stability. Built for industrial and workshop flexibility This cutter is tailored to workshop and industrial milling where reliable, indexable tooling is preferred over brazed alternatives. The indexable concept allows consistent cutting performance and straightforward maintenance, making it suitable for job shops and production lines that require a dependable T-slot solution. The tool is compatible with standard insert-based toolholding systems, enabling integration into existing fleets with minimal adaptation. Contact Metav Werkzeuge for tailored technical advice and availability on the Teknik Makina T-slot cutter (SKU TKC182TM), and benefit from local stock and fast delivery from Emmerich. Technical Data SKU: TKC182TM Label: 80mm T-Nut Fräser RD-- 1003 L120mm Manufacturer: Teknik Makina Compatible inserts: RD-- 1003 Core data Diameter: 80 mm Overall length: 120 mm Shank diameter: 22 mm Weight: 0.567 kg Cutting edges: 7 Special features Compatible with RD-- 1003 indexable inserts Fastening: Torx T15 Fastening screw: M3.5x8.5 Product type: T-slot cutter UID: TKC182TM FAQ What insert system does this cutter use? The cutter is built for the RD-- 1003 indexable inserts, enabling quick replacement of worn edges and consistent cutting performance with the defined insert geometry. How many cutting edges are fitted and what is their benefit? The tool features 7 cutting edges, which spread the cutting load to reduce peak forces and deliver smoother engagement during slotting operations. Which shank diameter is required for secure clamping? A 22 mm shank provides the rigidity needed for stable clamping, minimizing vibration and supporting repeatable slot dimensions when the T-slot cutter is used in production. Is the fastening system specialised or standard? Fastening is achieved with a T15 Torx driver and an M3.5x8.5 screw, a reliable combination that permits predictable, quick insert changes on the cutter. What environments is this tool suited to? The cutter is intended for workshop and industrial milling applications where indexable tooling is preferred for its serviceability and process reliability; the T-slot cutter supports repeatable slot production and straightforward tool maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a large cutting diameter, a robust 22 mm shank and compatibility with RD--12 indexable inserts to ensure stable, repeatable T-slot milling and uninterrupted production. Order the tool directly via Metav Werkzeuge or consult our specialists for installation and process integration advice. T-slot cutter for RD--12 indexable inserts — 80 mm diameter, 22 mm shank | Teknik Makina A T-slot cutter for RD--12 indexable inserts designed for dependable, high-precision T-slot machining in both jobbing shops and serial production environments 80 mm cutting diameter 22 mm solid shank for stable clamping Compatible with RD--12 indexable inserts Seven cutting edges for efficient removal Reliable stability for precision T-slot machining The cutter’s 80 mm diameter combined with a 22 mm shank provides a rigid tool setup that reduces vibration and run-out during T-slot machining. A stable clamping interface means improved surface finish and extended insert life, which lowers downtime and tool costs. For milling operations where repeatability is critical, the tool’s geometry limits deflection and supports consistent slot dimensions across batches. Fast insert changes and predictable cutting performance Designed for use with RD--12 indexable inserts, the tool offers quick insert replacement and consistent cutting geometry. The head accepts a set of seven cutting edges, enabling balanced material removal and smooth feed behaviour. Insert retention is secured with an M3.5x8.5 Torx screw, tightened with a T15 key, allowing safe, fast maintenance and minimised machine idle time. Indexable inserts deliver a cost-effective route to high productivity without compromising process control. Integrates into existing tooling systems and workflows Weighing 0.546 kg and with a compact 50 mm overall length, the cutter is suitable for close-tolerance setups and standard toolholders. The modest mass helps reduce spindle load while the cutter’s design supports straightforward incorporation into existing fixture and milling programmes. The item is supplied under SKU TKC187TM, making ordering and inventory management simple for purchasing and maintenance teams. Contact Metav Werkzeuge for specification support or to request a quotation for the Teknik Makina T-slot cutter TKC187TM via info@metav-werkzeuge.com or on +49 2822 7131930 Technical data Label: 80mm T-Nut Fräser RD-- 12 L50mm SKU: TKC187TM Manufacturer: Teknik Makina eClass: 21180605 Facts Cutting diameter: 80 mm Overall length: 50 mm Shank diameter: 22 mm Cutting length: 23 mm Weight: 0.546 kg Number of cutting edges: 7 Special features Compatible with RD--12 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 Product type: T-slot cutter UID / Article number: TKC187TM FAQ What insert type does this cutter use? The cutter is designed for RD--12 indexable inserts, offering a standardised insert interface for predictable cutting geometry. How many cutting edges are fitted to the cutter? The tool head carries seven cutting edges, arranged to provide balanced material removal and efficient machining. Which shank diameter is required for clamping? A 22 mm shank diameter provides solid clamping; the cutter is intended for holders that accept this shank size. Is the insert secured with a standard screw type? Yes, inserts are retained with an M3.5x8.5 Torx screw that is tightened using a T15 key for reliable fixation and quick replacement. What is the SKU for ordering and stock management? The item is listed as TKC187TM, which should be used for ordering and inventory purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable design and a large Ø80 mm cutting capacity for fast, reproducible T-slot production; the 32 mm shank provides stable clamping while compatibility with SPMG 06 inserts from Taegutec simplifies tooling logistics. Order the cutter directly via Metav Werkzeuge or consult our specialists for process optimisation. T-slot milling cutter TKC058TM – Ø80 mm, 32 mm shank by Teknik Makina The T-slot milling cutter TKC058TM is a purpose-built tool for machining T-slots and grooves on tables and fixtures, combining an indexable-insert system with a sturdy shank for CNC and manual milling applications. Indexable SPMG 06 insert system 80 mm cutting diameter 32 mm shank for secure clamping 10 cutting edges for faster material removal High throughput with consistent slot quality The tool is engineered for short cycle times and repeatable slot geometry. With a Ø80 mm cutting diameter and 10 cutting edges, material removal rates are increased while chip load per tooth is reduced, which improves surface finish and prolongs insert life. The indexable concept with SPMG 06 inserts reduces downtime for tool changes and creates a predictable maintenance rhythm, so production planners can calculate costs and run times with confidence. Secure mounting and rapid insert service Stable clamping is achieved via the 32 mm shank and an overall length of 120 mm, which supports rigid machining and reduces vibration in demanding milling operations. Insert fastening uses a M2,2x5 Torx screw and a T7 key for straightforward replacement and torque control; these familiar components simplify workshop procedures and spare-part management. The cutter’s balanced geometry and specified 45 mm effective cutting length make it suitable for many table and fixture dimensions while keeping set-up times low. Durable construction and straightforward application Designed for repeated industrial use, the tool delivers durability without complexity. The modest weight of 0.944 kg and compact footprint aid handling and tool-change ergonomics on the shop floor. Compatibility with Taegutec indexable inserts ensures access to a wide range of grades for aluminium, steel and general-purpose steels where operators require reliable slot profiles. The indexable system reduces consumable costs compared with solid cutters and supports sustainable workshop practices through longer-lasting cutting edges. For application-specific advice on Teknik Makina’s TKC058TM and tailored supply from Emmerich, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKC058TM Manufacturer: Teknik Makina Key measurements Diameter: 80 mm Teeth: 10 Overall length: 120 mm Shank diameter: 32 mm Cutting length: 45 mm Shank cutting diameter: 31.5 mm Cutting height: 6 mm Weight: 0.944 kg Features & compatibility Insert type: SPMG 06 Compatible inserts: Taegutec Fastening: Torx screw M2,2x5 Torx key: T7 Application: T-slot milling and groove machining FAQ Which insert size is required for this cutter? The cutter accepts SPMG 06 indexable inserts; compatible grades are available from Taegutec for a range of materials. What is the shank diameter and why does it matter? The 32 mm shank offers a secure clamping interface that reduces vibration and improves slot accuracy during machining. How many cutting edges are fitted and what is the advantage? The tool has 10 cutting edges, which spreads chip load and increases material removal while improving surface finish. Is the TKC058TM suitable for CNC workstations? Yes. The cutter’s indexable design, balanced geometry and solid shank make it suitable for CNC milling centres and production benches. What fastening hardware is used for the inserts? Insert retention uses M2,2x5 Torx screws tightened with a T7 key for reliable, repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the 80 mm cutting diameter, 32 mm shank and compatibility with Korloy MGM 5C inserts to achieve reliable, repeatable T-slot machining; order via Metav Werkzeuge or request technical advice from our consultants for immediate stock and application support. T-slot cutter TKC308TM by Teknik Makina — 80 mm diameter, 32 mm shank The T-slot cutter TKC308TM is a precision round milling cutter designed for producing T-slots and industrial grooves with indexable inserts, ideal for workshop and production environments where repeatability matters 80 mm cutting diameter for robust slotting 32 mm shank for stable toolholding Accepts Korloy MGM 5C indexable inserts M8 torx clamping screw with 6 mm Allen key High productivity through measured rigidity and diameter control The TKC308TM delivers consistent slot geometry by combining an 80 mm cutting diameter with a substantial 32 mm shank, which reduces deflection under load and improves surface quality. In practice, a stiffer shank means fewer reworks and less machine time per part; this measurable gain in process stability supports faster cycle times and predictable quality. The tool’s two cutting edges and defined cutting height ensure efficient material removal while keeping vibration in check, making it suitable where dimensional accuracy of the slot is critical. Quick insert changes and secure clamping reduce downtime Fast, safe insert handling is achieved through compatibility with Korloy MGM 5C indexable inserts and a reliable M8 torx clamping screw. The supplied clamping specification uses a 6 mm Allen key, enabling repeatable torque application and straightforward maintenance routines. Minimising changeover complexity directly improves uptime on the shop floor; the toolholder geometry and accessible screw placement speed up insert replacement and inspection, which is especially valuable in batch production and maintenance schedules. Simple integration with existing tooling and fixtures With an overall length of 120 mm and a shaft-to-cutting-edge distance of 24.25 mm, the cutter integrates cleanly into standard toolholders and setups. The compact weight of 0.86 kg allows predictable tool balancing and limits spindle load, which helps preserve both the cutter and the machine spindle. These measured attributes make the cutter a pragmatic choice for workshops seeking performance without complex retrofit work: install, set the correct runout tolerances and begin milling precise T-slots. Built for repeatability and shop-floor reliability The mechanical design focuses on repeatable clamping and consistent cutting geometry, supporting long production runs with minimal variation. The cutter’s cutting height of 5 mm and dual-edge configuration maintain a stable chip formation regime, which lowers the chance of edge chipping and supports a reliable surface finish across parts. Backed by Metav’s emphasis on accessible precision, this tool suits maintenance and production teams aiming to reduce supplier complexity while keeping measurement and process integrity at the forefront. Contact Metav Werkzeuge for a specification review or sample availability for the Teknik Cutting Tools T-slot cutter TKC308TM — our technical advisers in Emmerich provide direct guidance on suitability and stocking options Technical data SKU: TKC308TM Brand: Teknik Makina Product name: T-slot cutter TKC308TM Diameter: 80 mm Shank diameter: 32 mm Cutting-edge spacing (shaft to edge): 24.25 mm Cutting height: 5 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.86 kg Suitable for Korloy inserts Compatible insert type: MGM 5C Clamping screw: M8 torx Required key: 6 mm Allen key Tool style: round milling cutter FAQ Which indexable inserts are compatible with this cutter? The TKC308TM accepts Korloy MGM 5C inserts; this compatibility ensures straightforward replacement and access to a wide range of insert grades for different finishes. What are the key dimensions to check before mounting? Important dimensions include the 80 mm diameter, 32 mm shank, 120 mm overall length and the 24.25 mm distance from shaft to cutting edge; these values are essential for toolholder selection and setting correct tool offsets. How is the insert secured and what tool is required? Each insert is secured with an M8 torx clamping screw; a 6 mm Allen key is specified for torqueing and repeatable clamping during insert changes. Is the cutter suitable for high-volume production? The cutter’s robust 32 mm shank, measured geometry and dual cutting edges are designed to support repeatable runs and quick insert changes, making it appropriate for regular production use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise T‑slot milling with an 80 mm diameter head, a robust 32 mm shank and a cartridge-style insert system for fast changeovers; order the tool or request advice from Metav Werkzeuge for a reliable workshop supply solution. T-slot cutter TKC305TM — 80 mm diameter, for MGM 4C indexable inserts (Teknik Makina) A T-slot cutter TKC305TM intended for industrial slot milling, designed to accept MGM 4C indexable inserts and to integrate with standard toolholders. 80 mm cutting diameter 32 mm shank for secure clamping Compatible with MGM 4C inserts Engineered for efficient T‑slot production The tool is built around an 80 mm cutting diameter and a 32 mm shank, which together ensure stable metal removal and consistent slot geometry. The moderate mass of 0.86 kg reduces inertia during rapid tool changes while still delivering the rigidity required for repetitive machining. With two cutting edges and a cutting height of 4 mm, the cutter balances material removal rate and surface finish, making it suitable where repeatable, precise T‑slots are required. The design reduces set-up iterations and contributes to a leaner production flow by shortening downtime between operations. Indexable insert system for rapid maintenance The cutter accepts MGM 4C indexable inserts and is compatible with inserts from Korloy, enabling rapid regrinds or replacements without removing the entire toolholder. Securing is handled via an M8 torx screw and a 6 mm hex key, which keeps insert changes straightforward and repeatable. The two‑edge configuration lowers tooling costs compared with solid cutters, because worn edges are rotated or replaced rather than discarding the whole head. For operations focused on uptime and predictable consumable spend, this insert system delivers measurable savings and simplifies tooling logistics. Practical dimensions for reliable workshop integration With an overall length of 120 mm and an effective distance from cutting edge to shank of 24.25 mm, the cutter fits common arbors and allows for compact setup in milling heads or arbors designed for indexable tooling. The 32 mm shank facilitates secure clamping and reduces the likelihood of runout when used with matching collets or shrink-fit holders. The compact overall envelope combined with a two‑edge geometry is intended to reduce vibration and improve surface integrity in the slot, which helps to cut rework and inspection time on downstream processes. Performance and procurement considerations for production use Designed for repetitive slotting tasks, the cutter is a rational choice where process stability and cost control are priorities. The indexable insert concept, compatible supplier options and standard clamping hardware make it straightforward to adopt in existing tool repertoires. Metav Werkzeuge supplies the tool with a focus on dependable delivery from Emmerich, offering a pragmatic route to secure supplies and maintain production continuity. For workshops aiming to reduce the number of single‑use cutters, this solution supports longer tool life cycles and easier inventory management. Contact Metav Werkzeuge in Emmerich for a procurement consultation or technical clarification on the TKC305TM T‑slot cutter; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: TKC305TM Manufacturer: Teknik Makina Brand: Teknik Makina SKU: TKC305TM Facts Diameter: 80 mm Shank diameter: 32 mm Overall length: 120 mm Cutting edges: 2 Cutting height: 4 mm Cutting edge to shank distance: 24.25 mm Weight: 0.86 kg Special features Compatible with MGM 4C indexable inserts Korloy insert compatibility Torx screw: M8 Tool key: 6 mm Allen Story trigger: round milling cutter FAQ What inserts fit the cutter? The cutter accepts MGM 4C indexable inserts and is compatible with Korloy insert types specified for this system; use inserts matching the MGM 4C geometry for correct seating. What are the key dimensions for holder selection? Shank diameter is 32 mm and overall length is 120 mm; ensure the arbor or holder accepts a 32 mm shank for the correct fit with the TKC305TM. How many cutting edges does the tool have and what is the cutting height? The tool is configured with 2 cutting edges and a cutting height of 4 mm, which balances material removal and surface finish for T‑slot applications. Which fastening hardware is used for the inserts? Insert retention is via an M8 torx screw, tightened with a 6 mm hex key as supplied or specified for maintenance. Is the cutter suitable for repeatable series production? Yes — the indexable insert system and robust 32 mm shank make the cutter suitable for repetitive T‑slot production where quick insert changes and consistent slot geometry are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Efficient T‑slot production through stable 80 mm cutting diameter and quick insert changes with Taegutec SPMG 07 compatibility; order directly via Metav Werkzeuge or consult our specialists for holder recommendations T-Nut Fräser TKC070TM — 80 mm diameter, 10 mm cutting height (Teknik Makina) T-Nut Fräser TKC070TM is a robust T‑slot milling cutter designed for precision slotting and T‑nut profiles in CNC machining centres 80 mm cutting diameter 10 mm cutting height 32 mm shank diameter Compatible with SPMG 07 inserts by Taegutec Faster, more predictable T‑slot machining for series production The TKC070TM cutter is engineered to shorten cycle times while maintaining consistent slot geometry. With an 80 mm diameter and 10 mm cutting height, the tool removes material efficiently and reduces the number of passes required for many T‑slot profiles. The high tooth count (10 cutting edges) spreads chip load and lowers vibration, which translates into improved surface finish and repeatability on the machine, making the cutter particularly suitable for batch production where process stability and throughput are priorities. Low tooling cost and rapid maintenance with indexable inserts This T‑slot cutter uses SPMG 07 indexable inserts, compatible with Taegutec standards, so insert replacement is fast and cost‑effective. The insert clamping is secured via an M2.5x7 Torx screw (Torx key T8), enabling quick downtime recovery and straightforward maintenance procedures. Replacing worn inserts instead of regrinding bodies keeps overall tooling investment down and preserves cutter geometry, which minimises scrap and lowers total cost per part in medium to long runs. Secure interface and workshop integration for reliable results A 32 mm shank diameter and an overall length of 120 mm provide a stiff connection to the spindle or toolholder, reducing deflection during heavy cuts. The tool’s cutting portion (shaft cutting length 45 mm; cutting shank diameter 31.5 mm) and near 1 kg mass (0.994 kg) contribute to stable rotational behaviour and predictable cutting forces. These characteristics simplify holder selection and balancing on CNC machines, enabling planned feeds and speeds that support repeatable accuracy and longer insert life. Discuss Teknik Cutting Tools' TKC070TM with Metav Werkzeuge to optimise holder selection and delivery from Emmerich for fast integration into production Technical Data Article number: TKC070TM Manufacturer: Teknik Makina Designation: T-slot cutter SKU: TKC070TM Facts Diameter: 80 mm Cutting height: 10 mm Shank diameter: 32 mm Cutting length (shaft): 45 mm Cutting shank diameter: 31.5 mm Overall length: 120 mm Number of cutting edges: 10 Weight: 0.994 kg Special features Compatible with SPMG 07 indexable inserts Insert manufacturer compatibility: Taegutec Torx screw M2.5x7 for insert clamping Torx key size: T8 Designed for T‑slot and T‑nut profile milling FAQ What insert type does the cutter require? The TKC070TM accepts SPMG 07 indexable inserts; these are used with the cutter body and are compatible with Taegutec insert geometries. How is an insert secured to the cutter? Inserts are clamped with an M2.5x7 Torx screw; a T8 Torx key is used for tightening and replacement. What are the key dimensions for machine integration? Primary dimensions include an 80 mm cutting diameter, 32 mm shank diameter and 120 mm overall length as listed for the TKC070TM. Can the cutter be balanced for high‑speed machining? The cutter’s mass (0.994 kg) and shank geometry support stable rotation; balancing should be performed according to the machine and holder specifications for high‑speed applications. Which manufacturer makes this tool and who supplies it? The tool is produced by Teknik Cutting Tools and distributed via Metav Werkzeuge under SKU TKC070TM for European supply chains Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of sturdy indexable-insert compatibility, a large Ø80 mm cutter diameter and a robust 32 mm shaft for reliable T-slot production; order the tool directly via Metav Werkzeuge or ask our consultants if needed. T-slot cutter TKC122TM — Ø80 mm, for CCMT 0602 inserts (Teknik Makina) The T-slot cutter TKC122TM is a purpose-built milling tool for precise production of T-slots in machining centres and milling machines, offering stable engagement and quick insert changes. Ø80 mm cutter diameter for robust material removal Compatible with CCMT 0602 indexable inserts 32 mm shaft diameter with 32 mm cutting length Ten cutting edges for smooth chip evacuation Increased throughput through optimised geometry The cutter's large Ø80 mm diameter and multiple cutting edges deliver a higher material removal rate while preserving component integrity. Fitted for CCMT 0602 indexable inserts, the tool is configured for quick insert replacement and consistent performance on repeated runs. The multi-edge layout reduces individual insert load, which in turn lowers thermal stress and prolongs service intervals. For production environments seeking steady cycle times, the combination of diameter and insert system supports improved efficiency without complex set-up changes. Rigidity and vibration control for improved surface quality A robust 32 mm shaft and an overall length of 120 mm provide the mechanical stiffness required for demanding milling operations. The shaft dimensions are matched to the cutter body so that radial runout is minimised and chatter is suppressed; as a result, surface finishes and slot tolerances are maintained across batch production. The tool mass of 1.025 kg contributes to stable cutting dynamics, and the defined 9 mm cutting height keeps engagement predictable for precise slot profiles. Fast maintenance with standardised fastening The indexable-insert concept allows worn edges to be renewed in moments rather than replacing the entire cutter. Inserts are secured with M2.5x5.5 Torx screws and a T8 key, enabling rapid, repeatable clamping during tool service. This arrangement supports lean workshop routines: insert changes and inspections are carried out quickly, downtime is reduced, and tool life is maximised by restoring cutting geometry rather than discarding components. Application-focused design for reliable T-slot machining Engineered specifically for T-slot creation, the cutter's profile and ten cutting edges are intended to produce uniform slot flanks and clear chip channels. The use of indexable inserts ensures that cutting edges can be rotated or replaced to maintain cutting performance, making the tool suitable for repeated, high-volume operations where consistent slot geometry is required. The tool is supplied ready for mounting and intended for use in standard milling spindles that accept a 32 mm shaft. For reliable T-slot production with Teknik Makina’s TKC122TM, contact Metav Werkzeuge in Emmerich for technical advice and direct supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC122TM Manufacturer: Teknik Makina Product name: T-slot cutter Key measurements Diameter: 80 mm Cutting edges: 10 Overall length: 120 mm Shaft diameter: 32 mm Shaft cutting diameter: 31.5 mm Cutting length (shaft): 32 mm Cutting height: 9 mm Weight: 1.025 kg Features For indexable inserts: CCMT 0602 Torx screw: M2.5x5.5 Torx key: T8 SKU: TKC122TM FAQ What inserts are compatible with this cutter? The cutter is designed for CCMT 0602 indexable inserts; the TKC122TM accepts these inserts for straightforward edge replacement. How is the insert secured in the cutter? Inserts are fixed with M2.5x5.5 Torx screws using a T8 key, allowing quick and repeatable clamping during maintenance. What are the key dimensions that affect machine setup? Relevant dimensions include the Ø80 mm cutter diameter, 32 mm shaft diameter and overall length of 120 mm; these determine spindle compatibility and overhang. How many cutting edges does the tool have and what is the benefit? The tool has ten cutting edges, which distributes cutting forces and aids smooth chip evacuation for stable cutting performance. Is the cutter suitable for series production? Yes — the indexable-insert design and robust shaft geometry of the TKC122TM support repeated production runs with minimal downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a secure 27 mm mounting, a 90° cutting angle and compatibility with ANKX 1607 indexable inserts to improve repeatability and minimise tool-change downtime; order via Metav Werkzeuge or request consultancy for application-specific advice. Corner tool head — 90° cutting angle, for ANKX 1607 indexable inserts (Teknik Makina) The Corner tool head is intended as a rigid turning and shoulder tool head for CNC lathes, compatible with ANKX 1607 indexable inserts and optimised for secure mounting in standard tool holders. Corner tool head for ANKX 1607 inserts 90° cutting angle for shoulder turning 27 mm mounting diameter for secure fit M4.5×11 Torx screw with T15 key Repeatable shoulder turning from a stiff connection A precision mounting diameter 27 mm combined with a 90° cutting angle delivers a stable interface between tool and machine. The resulting rigidity reduces vibration and deflection during shoulder cuts, which directly improves dimensional repeatability and surface finish. For operations where concentricity and accurate step depths matter, this configuration provides a clear mechanical advantage by keeping the cutting geometry consistent through the work cycle. Faster servicing and longer uptime thanks to insert design Compatibility with indexable inserts such as ANKX 1607 and ANMX 1607 reduces downtime: worn edges are replaced instead of regrinding whole tools. The design features six cutting edges, extending the available life per insert and lowering tooling costs per component produced. Fast clamping and a single M4.5×11 Torx screw secured with a T15 key simplify insert changes and maintenance, enabling quick turnarounds during shift changes or small-batch runs. Robust dimensions for stable machining cycles A head diameter of 80 mm and an overall length 50 mm combine with a mass of 1.101 kg to provide inertial stability during interrupted cuts. The higher rotating mass contributes to steadiness at cut engagement points without overloading the turret, supporting consistent chip control and reduced chatter. This layout suits medium-duty turning where a dependable balance between accessibility and stiffness is required. Integrates with standard CNC tool posts to increase productivity Designed for common lathe tool holders, the turning head fits into established workflows and is straightforward to document in tool libraries. Its compatibility with ANKX-series inserts permits rapid matching of workpiece material to insert grade and geometry, aiding process optimisation. The result is a practical tool-holder solution that supports lean production by simplifying tooling inventories and standardising changeover procedures. For application advice or to secure supply of this Teknik Makina corner tool head (SKU T173TM), contact Metav Werkzeuge for tailored technical consultation and reliable delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T173TM Manufacturer: Teknik Makina Product: Corner tool head for ANKX 1607 indexable inserts Facts Cutting angle: 90° Mounting diameter: 27 mm Diameter: 80 mm Overall length: 50 mm Weight: 1.101 kg Cutting edges: 6 Special features Compatible with ANKX 1607 indexable inserts Also compatible with ANMX 1607 inserts M4.5×11 Torx screw T15 Torx key FAQ What inserts fit this turning head? This turning head is compatible with ANKX 1607 indexable inserts and also accepts ANMX 1607 inserts, offering flexibility in insert selection for different materials and grades. How is the insert secured? Inserts are clamped with a single M4.5×11 Torx screw; the screw is tightened using a T15 key for secure and repeatable fixing of the insert in the pocket. Is the head suitable for shoulder turning and facing? Yes. The 90° cutting angle and the solid 27 mm mounting diameter make the head particularly suitable for shoulder turning and facing operations where accuracy and stiffness are important. Will this tool head fit standard turret tool posts? The head is designed for common lathe tool-holder interfaces; compatibility should be confirmed against the machine tool’s clamping dimensions, referencing SKU T173TM and Teknik Makina specifications. What maintenance is recommended to preserve accuracy? Regular inspection of the insert seat, the Torx screw, and the mounting interface is advised; replacing worn inserts and maintaining correct screw torque will help preserve the head’s repeatability and cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise 90° cutting geometry and robust 27 mm shank for consistent shoulder machining; the compact Ø80 head and secure M4x10 Torx clamping ensure repeatable performance on indexable inserts. Order directly via Metav Werkzeuge or ask our consultants for integration support. Eckmesserkopf — Right-angle tool head for ADMT 1606 indexable inserts, 90° cutting angle (Teknik Makina) The Eckmesserkopf is a compact right-angle turning head designed for external shoulder and face operations using ADMT 1606 indexable inserts; suitable for workshop and production lathes where a reliable, repeatable tool interface is required. *90° cutting angle for accurate shoulder cuts *Compatible with ADMT 1606 inserts (Walter) *27 mm shank diameter for stable clamping *M4x10 Torx fastening with T15 key Reliable geometry for repeatable shoulder machining The right-angle holder provides a defined 90° cutting angle, which delivers a consistent engagement geometry for shoulder and facing operations. This stable cutting orientation reduces the need for repeated setup adjustments and helps achieve uniform part dimensions in small-batch and serial production. The compact Ø80 head minimises overhang while maintaining sufficient clearance for chip evacuation, so cycle times stay predictable and tool life is optimised. Stable clamping and quick insert replacement Featuring a 27 mm shank for secure mounting, the head combines rigid support with accessible fastening: the insert is secured using an M4x10 Torx screw tightened with a T15 key. The simple clamping interface shortens maintenance time and lowers the risk of incorrect torque during changes. With seven cutting edges noted on the design, the component supports efficient indexable-insert use and limits downtime associated with tool handling. Designed for compatibility with standard inserts and systems Engineered for ADMT 1606 indexable inserts and tested for fit with Walter manufactured plates, the holder integrates with common insert standards to simplify inventory and tool planning. The compact overall length of 52 mm contributes to minimised stick-out, which in turn improves rigidity and reduces vibration. Where tool interchangeability and predictable performance are priorities, this head offers a practical balance between modularity and a purpose-driven footprint. Practical benefits for workshop and production environments Weighing 1.254 kg, the component is substantial enough to provide damping during cuts while remaining straightforward to mount and reposition. The configuration supports faster set-up routines and fewer in-process adjustments, yielding improved throughput. For operations aiming to combine dependable repeatability with straightforward serviceability, the holder’s form factor and fastening method provide tangible time-savings and consistent machining outcomes. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools T356TM right‑angle tool head into existing setups and to discuss compatible inserts and clamping recommendations Technical data Article number: T356TM Brand: Teknik Makina Facts Diameter: 80 mm Total length: 52 mm Shank diameter (d): 27 mm Weight: 1.254 kg Cutting angle: 90° Cutting edges: 7 Special features Compatible with ADMT 1606 indexable inserts Torx screw M4x10 for insert clamping Torx key size T15 required Designed for external shoulder and face applications FAQ What insert type does this holder accept? The holder accepts ADMT 1606 indexable inserts; it is designed for secure seating and correct orientation with that insert format. Is the clamping fastener a common size? Yes, the insert is secured with an M4x10 Torx screw tightened using a T15 key. Which manufacturers’ inserts are known to fit this head? Compatibility has been confirmed for Walter ADMT 1606 inserts; the holder follows common insert geometry for interchangeability. How does the 27 mm shank affect mounting stability? A 27 mm shank delivers a robust connection to the toolpost or turret, reducing deflection and improving dimensional repeatability during shoulder cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of compatibility, rigidity and precise 90° cutting geometry to maintain consistent cycle times and surface quality; order this tool head for delivery and expert advice through Metav Werkzeuge or consult their specialists for application-specific recommendations. Corner turning head – 90° cutting geometry, Ø80 mm | Teknik Makina The corner turning head for ANKX 1205 indexable inserts provides rigid, right‑angle machining for medium‑duty CNC turning and facing operations Rigid 90° cutting geometry Ø80 mm body diameter 27 mm shank for stable clamping ISCAR-compatible ANKX insert fit Consistent form and surface finish through rigid geometry The toolhead's design focuses on stability and repeatability: the Ø80 mm body combined with a 27 mm shank delivers a stiff interface to the turret, reducing chatter and improving surface finish in shoulder and profile turning. The built‑in 90° cutting angle creates defined part shoulders and faster set-up tolerances, which aids process consistency across batch production. For operations where dimensional control is essential, this geometry reduces rework and contributes directly to higher first‑pass yield. Fast insert changes and straightforward maintenance Compatibility with established indexable systems streamlines workshop logistics. The head is specified for ANKX 1205 indexable inserts and matches common vendor standards from ISCAR, enabling simple stock management and swift insert replacement. Insert retention is secured with an M4x10 Torx screw tightened using a T15 key, so changeovers are quick and require only standard tooling. The indexable design reduces downtime compared with brazed solutions and simplifies edge changes without special fixtures. Practical dimensions for versatile workshop use With an overall length of 50 mm and a mass of 1.21 kg, the head balances reach and rigidity for general turning and finishing tasks; the compact form helps to maintain clamping stability while still allowing access into tighter work envelopes. The specification of seven cutting edges supports sustained cutting performance between re‑indexes, depending on material and cutting data. The combination of these measurable parameters makes the component a dependable choice for repeating shoulder work and mixed batch turning where tool life and quick servability matter. Metav's assurance for reliable supply and technical guidance Sourced and distributed via Metav Werkzeuge, the product is supported by a European quality filter and decades of application experience. Metav's approach reduces supplier complexity for workshops and purchasing departments, backed by a broad inventory and technical consultancy. This ensures that the tool head arrives as specified and that process queries can be resolved with pragmatic, industry‑grade answers to support production continuity. For application guidance or to arrange supply of the Teknik Makina corner turning head through Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and delivery options Technical data Article number: T576TM Manufacturer: Teknik Makina Product: Corner turning head for ANKX 1205 indexable inserts Facts Body diameter: 80 mm Overall length: 50 mm Shank diameter (Ø): 27 mm Weight: 1.21 kg Cutting angle: 90° Number of edges: 7 Torx screw: M4x10 Torx key size: T15 Special features Compatibility with ISCAR inserts Designed for ANKX indexable insert family Quick insert retention via Torx screw Compact design for medium‑duty turning FAQ What insert type does the head accept? The corner turning head is designed for ANKX 1205 indexable inserts and is compatible with ISCAR‑specification ANKX systems. Which toolholder connection is required for mounting? The head requires a 27 mm shank holder for secure clamping and optimal rigidity as specified for this model (Ø27 mm). How is an insert fixed to the head? Inserts are secured with an M4x10 Torx screw; a T15 key is used for tightening and loosening during index changes. Is the unit suitable for shoulder turning with tight tolerances? Yes. The 90° cutting geometry and the Ø80 mm body provide the stiffness needed for accurate shoulder and profile turning. What are the typical dimensions and weight to consider for turret clearance? Overall length is 50 mm and weight is 1.21 kg; these figures support planning for turret overhang and balance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact turning solution that combines a 27 mm shank for rigid mounting, compatibility with SPMT 1204 indexable inserts and a stable Ø 80 mm head for reduced vibration — ideal for reliable external turning. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. T652TM corner turning head by Teknik Makina — for SPMT 1204 indexable inserts, 27 mm shank The T652TM corner turning head is a purpose-built external turning tool head for precision metalcutting on lathes, compatible with SPMT 1204 indexable inserts and engineered to maintain process stability in demanding machining tasks. Solid 27 mm shank for rigid mounting Accepts SPMT 1204 indexable inserts Head Ø 80 mm for stable cutting Torx M5x12 fastening with T20 key Increased process stability through robust design The T652TM is designed to deliver stable cutting performance by combining a solid 27 mm shank with a substantial Ø 80 mm head, which together reduce tool deflection and vibration during turning operations. This mechanical stability translates directly into improved surface finish and longer insert life, especially when machining interrupted cuts or materials that tend to chatter. The head's mass and geometry support consistent cutting conditions, making cycle times more predictable for production environments. Practical benefits for workshop productivity Fitted for SPMT 1204 indexable inserts, the tool head enables fast insert indexing and predictable cutting geometry, reducing downtime for tool changes. The configuration with 6 cutting edges allows economical use of indexable inserts and minimises tooling cost per component. Quick, repeatable clamping is ensured by the M5x12 Torx screw and the matching T20 key, which simplify insert replacement and secure the insert seat with consistent torque — a clear advantage in high-mix workshops where rapid set-up is essential. Easy integration and handling on the machine With an overall length of 50 mm and a measured weight of 1.186 kg, the head balances compactness and mass, helping to maintain steady spindle loads without excessive overhang. The modular nature of the head, intended for use with standard SPMT 1204 inserts, allows straightforward replacement of cutting edges and compatibility with existing toolholders. For procurement and logistics, choosing this head through Metav Werkzeuge provides access to a broad range of workshop supplies and a proven quality filter from the supplier in Emmerich. For precise tool selection and purchasing of the Teknik Makina T652TM corner turning head, contact Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to advise on integration into existing tool systems Technical data SKU: T652TM Product: Corner turning head for SPMT 1204 indexable inserts Manufacturer: Teknik Makina Shank diameter: 27 mm Head diameter: 80 mm Number of cutting edges: 6 Core data Weight: 1.186 kg Overall length: 50 mm Shank diameter: 27 mm Head diameter: 80 mm Cutting edges: 6 Features Torx screw: M5x12 Torx key size: T20 Compatible inserts: SPMT 1204 indexable inserts Application: external turning FAQ What inserts fit this turning head? The T652TM is designed for SPMT 1204 indexable inserts, offering standard seating and geometry for those insert types. How is the insert secured in the head? Insert clamping is achieved with an M5x12 Torx screw, tightened with a T20 key, providing repeatable and secure fixation for the SPMT 1204 inserts. Is this head suitable for heavy-duty turning? The combination of a 27 mm shank and Ø 80 mm head improves rigidity and vibration damping, supporting stable operation in demanding external turning tasks. Can the head be mounted on standard toolholders? The shank diameter and compact overall length make the head compatible with toolholders designed for a 27 mm mounting interface; toolholder compatibility should be confirmed against the machine’s toolpost specifications. How many usable cutting edges are available per insert? The tool head accepts SPMT 1204 inserts, which typically provide multiple indexable edges; the head itself presents 6 cutting edges as part of its design configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise insert compatibility and reliable coolant delivery to maintain steady production and reduce insert wear—ideal for workshops that require compact tools with accessible maintenance. Order directly via Metav Werkzeuge or request advice from our consultants for specification matching. Boring bar KA500TM — 8 mm shaft, internal coolant (Teknik Makina) The Boring bar KA500TM is a compact tool for precision internal boring with CCMT 0602 indexable inserts, designed for right-hand cutting in confined machining environments. Compatible with CCMT 0602 indexable inserts 8 mm shaft diameter with 100 mm overall length Internal coolant supply for improved chip evacuation Right-hand cutting with 95° cut angle Maximised stability for consistent insert performance The KA500TM delivers steady cutting behaviour through its purpose-built geometry and secure clamping. Compatible with CCMT 0602 indexable inserts, the toolholder offers a 4.3 mm clamp head width and a 25 mm cutting height, which together ensure reliable insert seating and reduced vibration. This combination translates into more consistent bore diameters and extended insert life, supporting efficient batch production and fewer rework cycles. Targeted coolant flow to improve surface finish Equipped with internal coolant, the bar channels lubricant directly to the cutting edge for effective chip evacuation and heat control. Direct coolant feed reduces built-up edge formation and improves surface quality in through-bore and blind-bore operations. For materials sensitive to heat or where chip evacuation is critical, the integrated coolant route helps maintain tool performance and contributes to predictable machining outcomes. Compact dimensions for tight-bore access and accurate positioning With an 8 mm shaft and 100 mm overall length, the tool is intended for operations where access and rigidity must be balanced. The low mass (approx. 0.045 kg) minimises runout and dynamic deflection in small-diameter bores, while the 95° cut angle and right-hand cutting orientation deliver controlled approach behaviour. These attributes make the bar suitable for precision maintenance, finishing passes or where minimal overhang is required. Quick insert changes and low-maintenance operation Maintenance is straightforward thanks to standardised fastenings: the insert is secured with a Torx T8 key and an M2.5x5.5 Torx screw, enabling rapid replacement and short machine downtime. The compact design and common fastening standard also simplify tool inventory management and operator training, helping workshops maintain throughput with minimal additional tooling. Contact Metav Werkzeuge to confirm suitability of the Teknik Makina KA500TM for specific materials or to arrange supply from our Emmerich warehouse — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA500TM ISO designation: A06-08H SKU: KA500TM Facts Shaft diameter: 8 mm Overall length: 100 mm Cutting height: 25 mm Weight: 0.045 kg Cut angle: 95° Cutting direction: right Special features Internal coolant Compatible with CCMT 0602 indexable inserts Clamp head width: 4.3 mm Torx key: T8 Torx screw: M2.5x5.5 Product type: Boring bar eClass: 21180806 FAQ What inserts fit this boring bar? The boring bar KA500TM is designed for CCMT 0602 indexable inserts, ensuring standardised seating and consistent cutting geometry. Can the tool be used for blind bores as well as through bores? Yes, the integrated internal coolant and compact geometry make the bar suitable for both through-bore and many blind-bore applications, improving chip control in confined spaces. What is the recommended tightening method for the insert? Use a Torx T8 driver to secure the insert screw (M2.5x5.5); this is the specified fastening method for the KA500TM to ensure reliable clamping. Is this tool suitable for high-speed machining? The component is compact and rigid, which helps at elevated speeds in small-diameter bores; however, final speed recommendations depend on material and insert grade rather than the holder alone. Which cutting direction does the holder support? The bar is specified for right-hand cutting with a 95° cut angle, providing predictable approach behaviour in typical lathe and turning set-ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compatibility with CCMT 0602 inserts, the compact 8 mm shank, and the precise 95° cutting geometry to maintain steady tool performance in tight bores; order the component directly via Metav Werkzeuge or request specialist advice from their consultants. Boring bar S06-08H – 8 mm shank, L100 mm, for CCMT 0602 Indexable Inserts (Teknik Makina) Boring bar S06-08H for precision internal turning and finishing operations with CCMT 0602 indexable inserts, optimised for compact setups and right-hand cutting applications S06-08H boring bar for CCMT 0602 inserts 8 mm shank for compact toolholders 100 mm overall length for tight bores Right-hand cutting with secure Torx fastening Reliable insert compatibility for cost-efficient turning The tool is engineered for use with CCMT 0602 indexable inserts, providing a cost-effective approach to external and internal turning by enabling rapid insert changes and consistent edge positioning. The design reduces machine downtime through standardised insert geometry and repeatable seating, which translates into predictable cycle times and lower consumable costs. For operations where reproducibility is essential, the quick insert change capability supports uninterrupted production and straightforward regrinding strategies. Compact dimensions that improve access and stability With an 8 mm shank and 100 mm overall length, the bar is tailored for constrained bores and compact tool stacks while preserving sufficient overhang control. The 95° cutting angle is set to balance cutting forces and chip flow, helping to reduce chatter in restrained setups and to improve surface finish. The modest mass (approx. 0.045 kg) contributes to better dynamic behaviour in high-speed or small-tool applications, and the measured cutting height 25 mm together with a 4.3 mm clamp head width ensure reliable seat geometry for the insert — important for maintaining concentricity and repeatable cutting performance. Secure fastening and pragmatic maintenance features Fastening is implemented via a Torx T8 drive and an M2.5×5.5 screw, providing reliable clamp torque and simple access for routine servicing; the standardised torque interface supports consistent tightening without special tooling. The bar’s specification focuses on pragmatic workshop practice: robust clamp retention, straightforward screw access and compatibility with commonly stocked CCMT grades. These attributes reduce setup time and simplify tool management in production environments, ensuring the component integrates smoothly into established tooling systems. For specification confirmation, supply queries or tailored cutting recommendations for the S06-08H boring bar, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a supply and technical consultation. Technical data Article number (SKU): K293TM ISO designation: S06-08H Label: 8mm Boring bar CCMT 0602 L100mm Manufacturer: Teknik Makina eClass: 21180806 Key dimensions Diameter / shank: 8 mm Overall length: 100 mm Cutting height: 25 mm Clamp head width: 4.3 mm Weight: 0.045 kg Cutting angle: 95° Cutting direction: right Compatibility & fastening Compatible with CCMT 0602 indexable inserts Torx key: T8 Screw: M2.5×5.5 Category: Boring bars FAQ What insert types fit this boring bar? The S06-08H boring bar is compatible with CCMT 0602 indexable inserts and is designed to accept standard CCMT geometry for straightforward insert replacement. Is the S06-08H suitable for tight internal bores? Yes, the 8 mm shank and 100 mm overall length of the S06-08H make it suitable for compact bores where reduced overhang and improved access are required. Which direction of cut does the tool support? The component is configured for right-hand cutting, as indicated in the specification, matching common machine setups and turning programmes. What fastening hardware is used for the insert clamp? Fastening is by Torx T8 using an M2.5×5.5 screw, providing reliable clamp retention and easy access for maintenance on the S06-08H (SKU K293TM) from Teknik Makina. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a modular solution that combines compatibility with CCMT 0602 inserts, a robust modular design and ready-to-fit accessories for uninterrupted turning operations; order the set directly via Metav Werkzeuge or ask the consultants if needed Boring Tool Set THB01TM (Ausdrehwerkzeug Satz) – Modular external boring set for CCMT 0602, for roughing and finishing by Teknik Makina The Boring Tool Set THB01TM is a modular external boring system designed for both preliminary and finish turning; it pairs CCMT 0602 indexable inserts with a body and plug modules for quick diameter changes and efficient workshop integration CCMT 0602 compatible inserts Incl. extension and 2x Torx screws Modular body with THB03TM–THB09TM modules Robust set weight 3.1 kg for demanding work Greater throughput from a modular indexable system The THB01TM set is built around the CCMT 0602 insert standard and a modular holder architecture that reduces changeover time and increases machine uptime. By combining indexable carbide inserts with dedicated plug modules, the system enables fast adjustment of overhang and cutting radius without complex regrinding. For production environments this means fewer tool changes, a more predictable process window and measurable gains in machining efficiency. The modular construction also simplifies inventory management: one base holder with a series of modules covers a wide diameter range while maintaining stable cutting geometry. Ready-to-fit accessories that reduce setup time The kit includes a dedicated extension, two fastening screws and Torx keys T8 and T15, supplied to ensure secure assembly and repeatable clamping. This combination removes the need for immediate retrofit purchases and allows operators to mount the tool and begin machining with minimal auxiliary equipment. The set content—body and plug modules THB03TM–THB09TM—is arranged to support stepwise diameter adjustments. Clear mechanical seating and standardised fastening minimise wobble and promote consistent insert seating, contributing to longer effective tool life and a reliable surface finish. Optimised for roughing and finishing with long stand time Designed for both pre-machining and final passes, the tool set supports a stable cutting process that balances material removal and surface quality. The holder geometry ensures controlled chip guidance when paired with appropriate CCMT grades, which in turn helps to extend stand time under varying cutting conditions. For workshops aiming to combine productivity with repeatable part quality, this tool set reduces the need for frequent rework and supports predictable cycle times when used in lathes and turning centres. Integration into workshop workflows and professional support The mechanical simplicity of the modular concept eases commissioning and maintenance: familiar Torx fastenings and the supplied extension mean less time at the workbench and more time cutting. Metav's procurement and logistics from Emmerich provide a practical advantage for European shops seeking dependable supply and a quality filter across the product range. For complex job requirements or to confirm suitability for a specific turning task, Metav's consultants are available to advise on the best module combination and recommended insert grades. Contact Metav Werkzeuge for tailored advice on the Teknik Makina THB01TM modular boring set and secure efficient turning operations from Emmerich stock Technical data SKU: THB01TM Manufacturer: Teknik Makina Article name: Ausdrehwerkzeug Satz Wendeplatten CCMT 0602 Set contents: Body and plug modules THB03TM–THB09TM Included accessories: Extension and 2x Torx screws Numbers / core technical data Weight: 3.1 kg Pieces per set: 8 Special features / design Compatible with CCMT 0602 inserts Modular body with THB03TM–THB09TM modules For roughing and finishing operations Torx keys: T8 and T15 Ready-to-fit extension and fastening screws FAQ Which inserts are compatible with this set? The THB01TM boring tool set is compatible with CCMT 0602 indexable inserts; the geometry and clamping support standard CCMT grades for finishing and general turning. What exactly is included in the set? The set contains the main body and plug modules THB03TM–THB09TM, plus an extension and two Torx fastening screws for immediate assembly and use. How many items are in one set and what is the weight? One set comprises 8 pieces and has a total weight of 3.1 kg, suitable for stable handling and transport. Is the set suitable for both roughing and finishing operations? Yes, the modular holder design and CCMT insert compatibility make the THB01TM suitable for both preliminary material removal and final finishing passes when paired with the appropriate insert grades. Which Torx keys and screws are supplied? The delivery includes fastening screws and Torx keys T8 and T15 for secure clamping of the inserts and modules. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining an 8 mm cutting diameter with compatibility for TCMT 1102 indexable inserts and a sturdy 16 mm shank, this chamfer cutter delivers repeatable, shop-ready chamfering and countersinking in small-batch and serial production; order directly via Metav Werkzeuge or consult the technical team for specification matching. Chamfer cutter for TCMT 1102 indexable inserts — 8 mm, 16 mm shank A compact chamfering tool designed for precision edge preparation and countersinking in workshop and production environments, compatible with TCMT 1102 indexable inserts. Chamfer cutter for TCMT 1102 indexable inserts 8 mm cutting diameter, 16 mm shank 45° and 90° chamfer options Torx T8 screw system M2.5x5.5 Consistent chamfers for production workflows The chamfering tool is engineered to provide reliable and repeatable chamfers in diverse machining tasks. With a nominal cutting diameter of 8 mm and a maximum cutting diameter of 20 mm, the cutter suits precision tasks where edge geometry must be consistent across batches. The combination of a solid 16 mm shank and a 100 mm overall length ensures stable clamping in standard tool holders, reducing vibration and improving surface finish. For shops migrating from brazed cutters to indexable solutions, this tool simplifies insert changes and maintains process uptime. Flexible geometry: 45° and 90° options explained Two selectable chamfer angles—45° and 90°—enable both standard bevels and fuller countersinks without changing the tool body. The angles refer to the included chamfer geometry of the cutter body: a 45° configuration produces a common edge break used for assembly and deburring, while 90° supports seating and flush countersinking. Using indexable inserts (TCMT 1102) allows rapid adaptation of wear parts; inserts can be rotated or replaced without regrinding, which shortens maintenance intervals and lowers life-cycle costs while keeping machining tolerances tight. Practical assembly and maintenance features The cutter utilises a Torx fastening system (Torx T8 with M2.5x5.5 screw) for secure insert clamping and straightforward service. The two cutting edges provide a balance between cutting efficiency and chip evacuation for small chamfers and deburring passes. Replacement and adjustment are quick, requiring only a compatible Torx key, and the indexable concept reduces the need for precision grinding. Together these features contribute to higher machine utilisation and faster tool changes in busy production settings. Suitable applications and workplace benefits Ideal for general metalworking, fixture preparation and finishing operations, the tool performs well where controlled chamfer geometry is required on components prior to assembly or coating. The compact profile and modest weight support manual handling and quick tool setup at the machine. With clear compatibility for TCMT 1102 indexable inserts, the cutter integrates into existing insert inventories and enables predictable output quality across shifts and operators. Contact Metav Werkzeuge for application advice on Teknik Cutting Tools chamfer cutters; request specific insert recommendations or compatibility checks by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S334-2TM Product type: Chamfer cutter Brand: Teknik Makina Compatible inserts: TCMT 1102 Cutting diameter: 8 mm Maximum cutting diameter: 20 mm Overall length: 100 mm Shank diameter: 16 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.192 kg Chamfer angles: 45°, 90° Torx key: T8 Torx screw: M2.5x5.5 For indexable inserts Category: Shank cutters (Schaftfräser) FAQ What insert type is required for this cutter? This cutter uses TCMT 1102 indexable inserts; the geometry and clamping suit standard TCMT 1102 grades. Can the tool produce both 45° and 90° chamfers? Yes, the cutter is supplied with geometry options for 45° and 90° chamfering to cover common edge-breaking and countersinking needs. What is the shank size and how does it affect stability? The tool features a 16 mm shank, which provides stable clamping in compatible holders and helps reduce vibration for improved surface finish. What is the maximum workable diameter with this tool? The cutter supports a maximum cutting diameter of 20 mm, allowing for slightly larger chamfers or stepped operations when required. Which SKU identifies this product for ordering? Order reference is S334-2TM, Teknik Cutting Tools chamfer cutter for TCMT 1102 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, internal coolant and secure Torx clamping for dependable, high-throughput milling in small-tooling setups — order the tool via Metav Werkzeuge or consult the Metav team for application support. 8 mm shank insert milling cutter S701TM (for LNMU 0202, internal coolant) — Teknik Makina 8 mm shank insert milling cutter S701TM designed as an indexable-insert holder for light to medium milling operations, delivering consistent chip control through integrated coolant and a compact 140 mm overall length. *Insert holder for LNMU 0202 inserts *Internal coolant for improved chip control *8 mm shank, 140 mm total length *Compatible with Tungaloy insert range Increased throughput with compact rigidity The holder provides a balance between compactness and stability to support repetitive milling tasks on small spindles. The 8 mm shank and modest weight (0.095 kg) reduce spindle load while the 140 mm overall length keeps reach without excessive flex, enabling consistent machining cycles. Designed for indexable inserts LNMU 0202, the arbor secures a defined cutting geometry that simplifies process setup and repeatability. This arrangement leads to predictable tool life and steady component tolerances, which supports efficient workflow planning on job sheets. Improved cooling and reliable clamping for longer tool life Internal coolant is routed directly to the insert seat to aid chip evacuation and heat management; such an approach reduces thermal spreading and promotes stable edge life. The unit accepts a single cutting insert configuration and features a secure fastener system using a Torx key T6 and Torx screw M1.8x4.1, ensuring repeatable clamping torque and reduced downtime for insert changes. The 30 mm cutting length is sufficient for shoulder and light slotting work while keeping the cutting forces predictable, which contributes to fewer regrinds and lower tooling costs over production runs. Seamless integration and straightforward maintenance Compatibility with Tungaloy LNMU 0202 grade inserts and the standard 8 mm shank format makes the tool straightforward to integrate into existing toolholders and modular tooling systems. The compact design and common Torx interface simplify spare-part stocking and routine changeover procedures. For workshops aiming to reduce supplier complexity, the product’s standardised interface supports consolidation of insert stocks and cutting schedules. Technical queries and further application matching can be addressed by Metav’s specialists, ensuring the tool is specified to actual process conditions. Contact Metav Werkzeuge for tailored application advice and fast supply of the Teknik Cutting Tools S701TM with internal coolant — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data SKU: S701TM Label: 8mm Schaftfräser LNMU 0202 L140mm mit Innenkühlung Product type: Insert milling cutter Manufacturer: Teknik Makina Facts Shank diameter: 8 mm Overall length: 140 mm Cutting length (shank of cutter): 30 mm Number of cutting edges: 1 Weight: 0.095 kg eCl@ss: 21180806 Special features Internal coolant For LNMU 0202 indexable inserts Compatible with Tungaloy insert series Torx key: T6 Torx screw: M1.8x4.1 FAQ Is this tool compatible with standard 8 mm collets and toolholders? The shank is 8 mm, so the S701TM insert milling cutter fits standard 8 mm collets and compatible toolholders used for small shank tooling. Which inserts are required for this insert milling cutter? This arbor is designed for LNMU 0202 indexable inserts; the S701TM is compatible with the matching Tungaloy grades and geometries for that insert size. How is coolant supplied to the insert seat? Coolant is delivered through the holder’s internal coolant channel, directing fluid to the insert pocket for improved chip evacuation and thermal control. What fastening tools are required for insert changes? Insert retention uses a Torx screw, serviced with a T6 Torx key and a M1.8x4.1 screw specification for secure and repeatable clamping. Where to get technical data sheets or replacement screws? For technical data, spare parts or application advice, contact Metav Werkzeuge; they can provide data sheets and source original fastening parts for the S701TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com