Gibt es einen Hahn und Kolb Online Shop?

Benefit from precise parting performance thanks to the 4 mm cutting width and a 20 mm maximum parting depth, combined with compatibility for Korloy MGM 4 inserts to keep setup times short and production steady. Order the tool through Metav Werkzeuge or consult our specialists for application advice. Grooving and parting toolholder (D808TM) — left‑hand, 25 mm head width by Teknik Makina The grooving and parting toolholder (D808TM) is a left‑hand turning toolholder intended for accurate parting and narrow grooving on conventional and CNC lathes, engineered to accept Korloy MGM 4 indexable inserts. Left‑hand cutting direction 25 mm head width 4 mm cutting width Compatible with Korloy MGM 4 inserts High‑precision parting for reliable cycle times The D808TM delivers a consistent cut through a dedicated geometry that focuses on stability and chip control. With a 4 mm cutting width and 20 mm max parting depth, the holder is suited to common parting‑off and grooving tasks where repeatable, burr‑reduced results are required. The left‑hand orientation ensures correct cutting forces for left‑handed operations and avoids unexpected tool deflection, improving first‑pass yield and reducing rework. Stable clamping and robust dimensions for process security Built with a 25 mm head width and a cutting height of 45 mm, this holder gives secure support for inserts during interrupted cuts. The shank geometry, identified as ISO 2525, and a solid Ø 60 mm section combine with a total length of 150 mm to provide the rigidity needed for tighter tolerances. At 0.712 kg, the toolholder balances mass for vibration damping while allowing straightforward handling during tool changes. Compatibility that simplifies toolroom logistics Acceptance of Korloy MGM 4 inserts and a clamping/bar designation of 4C‑L (60‑80) reduces inventory complexity by matching common insert families. The holder supports up to 80 mm cutting diameter, enabling use across a range of component sizes. Compatibility with established insert standards shortens set‑up time and makes insert replacement intuitive for machinists, helping to sustain machine uptime and throughput. Where this holder adds value in production Designed for job shops, maintenance departments and small series production, the holder is effective for precise parting, narrow groove finishing and operations requiring predictable chip control. The dimensional data and compatibility make it straightforward to integrate into existing tool sets, while the construction delivers the process reliability expected in industrial turning environments. For specific machining scenarios, Metav Werkzeuge can advise on insert grades and cutting parameters to align the holder with material and speed requirements. For tailored advice on the D808TM grooving and parting toolholder by Teknik Makina or to arrange supply via Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance and reliable delivery. Technical data SKU: D808TM Manufacturer: Teknik Cutting Tools Cutting direction: left Compatible inserts: MGM 4 (Korloy) Core dimensions Head width: 25 mm Cutting width: 4 mm Cutting height: 45 mm Max parting depth: 20 mm Max cutting diameter: 80 mm Shank/section Ø: 60 mm Overall length: 150 mm Weight: 0.712 kg Shank cutting length: 25 mm Features ISO designation: 2525 Clamping/bar designation: 4C‑L (60‑80) Suitable for Korloy MGM 4 inserts Left‑hand orientation Ideal for parting and narrow grooving applications FAQ Which inserts fit the toolholder? The D808TM accepts Korloy MGM 4 indexable inserts; this compatibility simplifies procurement and replacement. What is the maximum parting depth? Maximum parting depth for this holder is 20 mm, enabling deeper cut‑off operations within the holder’s designed stability range. Is the toolholder suitable for CNC lathes? Yes, the holder’s rigidity, ISO 2525 shank designation and compatibility with standard insert families make it suitable for both manual and CNC lathe applications. What size shank does the holder use? The toolholder has a section diameter of 60 mm and an overall length of 150 mm, giving a secure mounting and good reach for many turning setups. How does the left‑hand orientation affect use? The left‑hand cutting direction positions cutting forces appropriately for left‑hand operations, reducing deflection in setups that require that orientation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise parting performance and stable clamping from a compact tool body. The combination of a narrow 4 mm cutting width and a maximum cutting diameter of 150 mm supports efficient grooving and parting cycles; order the tool directly via Metav Werkzeuge or contact the consultants for application advice. Stechklemmhalter D791TM — Parting tool holder with 4 mm cutting width by Teknik Makina The Stechklemmhalter D791TM is a robust parting and clamping holder designed for external grooving and parting on conventional and CNC lathes, offering a compact shank and compatibility with common indexable inserts. 4 mm cutting width for narrow grooves Max cutting diameter 150 mm for external turning Compatible with Korloy MGM 4 inserts Weight 0.712 kg for stable clamping Efficient machining through precise geometry and compatibility The holder’s 4 mm cutting width and controlled cutting height of 45 mm are engineered for repeatable groove profiles and reliable parting. The compact shank length of 25 mm and overall length of 150 mm make the component straightforward to integrate on standard toolposts. Designed to accept Korloy MGM 4 inserts, the assembly enables quick indexable-insert changes and consistent cutting behaviour. These attributes together reduce unplanned stoppages and contribute to shorter cycle times in batch or prototype runs. Stiffness, balance and secure clamping for consistent results With a tool body mass of 0.712 kg, the holder provides the stiffness required to limit chatter during parting and grooving. The ISO 2525 designation and the connection to 4C‑R (110–150) bar sizes ensure compatibility with established tool carriers, enabling secure mounting and easy replacement in existing setups. The right-hand cutting direction aligns with common turning strategies and simplifies process planning. The combination of mass and standardised interfaces supports stable chip formation and predictable surface finish. Application guidance and practical advantages on the shop floor Intended for external grooving and parting operations, the holder suits operations that need a narrow kerf and dependable clamping. The specified maximum plunging depth of 20 mm is sufficient for many parting tasks without excessive tool extension. Using the recommended Korloy insert grade for the workpiece material will extend insert life and keep downtimes low. For machine setup, keeping overhang minimal and verifying correct insert seating and clamping torque will preserve tool life and maintain cutting precision. The design favours quick insert swaps and straightforward stock removal strategies for high-repeatability production. For reliable parting performance and rapid integration, request the Teknik Makina Stechklemmhalter via Metav Werkzeuge or contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com Technical data Article number: D791TM Manufacturer: Teknik Makina Product name: Stechklemmhalter Compatible inserts: Korloy MGM 4 Facts Cutting width: 4 mm Maximum cutting diameter: 150 mm Cutting height: 45 mm Shank (cutting) length: 25 mm Maximum plunging depth: 20 mm Weight: 0.712 kg Overall length: 150 mm Diameter: 110 mm Special features ISO designation: 2525 Boring bar designation: 4C-R (110–150) Compatible with Korloy MGM 4 inserts Right-hand cutting direction FAQ What insert type is required for this holder? The holder accepts Korloy MGM 4 indexable inserts; selecting the correct insert grade for the workpiece material ensures optimal tool life and performance. Can the holder be used for deep parting operations? The maximum plunging depth is 20 mm; the holder is best applied where that depth meets the process requirements to maintain rigidity and reduce vibration. Which bar sizes does the holder fit? The tool is specified for use with the 4C‑R (110–150) bar range and a diameter reference of 110 mm, matching common toolpost systems. Is the cutting direction fixed? This variant is configured for right-hand cutting, suitable for standard external grooving and parting orientations. How does the tool body mass affect machining? At 0.712 kg, the tool body provides sufficient mass for stable clamping, helping to limit chatter and improve surface consistency during parting and grooving. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, reliable toolholder that combines a 4 mm cutting width, a 25 x 25 mm shank and a 150 mm overall length to deliver consistent right-hand grooving and parting performance; order the D770TM via Metav Werkzeuge or contact our specialists for application advice. Parting and Grooving Clamp Holder D770TM — 4 mm cutting width, 25 x 25 mm shank (Teknik Makina) A robust Parting and Grooving Clamp Holder D770TM designed for right-hand parting and grooving tasks on conventional and CNC lathes, suited to installations using 4C GRP indexable inserts 4 mm cutting width for narrow grooves Max parting depth 20 mm 25 x 25 mm shank, 150 mm overall length Compatible with ISCAR 4C GRP inserts Accurate grooves and clean parting that reduce rework The D770TM delivers a 4 mm cutting width and a maximum parting depth of 20 mm, enabling precise groove profiles and reliable part separation in repetitive production runs. The defined cutting width controls chip formation and minimises lateral vibration, which translates into fewer rejects and lower rework rates. For users unfamiliar with insert geometry, the cutting width refers to the effective material removed across the tool flank; a narrow width like this is ideal for fine grooves and tight-tolerance parting where edge control and surface finish matter. Stable mounting and quick integration into tool setups With a 25 x 25 mm shank and 150 mm overall length, the holder fits standard tool posts while providing the reach required for common turning setups. The ISO designation 2525 and the matching borestring reference 4C-R GRP make the interface predictable and compatible across systems. The holder is prepared for right-hand cutting, which simplifies tool orientation during set-up. A mass of approximately 0.747 kg contributes to rigidity without excessive overhang, supporting consistent cutting forces and reduced chatter during both groove forming and parting-off operations. Compatibility with indexable inserts for flexible workshop workflows The toolholder is specified for 4C GRP indexable inserts and explicitly compatible with ISCAR insert types, allowing workshops to standardise on a small range of inserts for multiple operations. Interchangeable insert systems reduce inventory complexity and shorten downtime when changing grades or geometries. The clamp-style mounting supports straightforward insert replacement and re-tightening, which is particularly useful in high-mix, low-volume environments where rapid tool changes preserve machine uptime and throughput. For robust right-hand parting and grooving applications, choose the Teknik Makina D770TM via Metav Werkzeuge — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for technical clarifications and ordering support. Technical data Article number: D770TM Product: Parting and grooving clamp holder D770TM Brand: Teknik Makina Core data Shank size: 25 x 25 mm Cutting width: 4 mm Max parting depth: 20 mm Overall length: 150 mm Weight: 0.747 kg Cutting direction: right Compatibility & features Suitable for 4C GRP inserts Compatible with ISCAR inserts ISO designation: 2525 Toolholder designation: 4C-R GRP FAQ Which inserts fit this holder? The holder accepts 4C GRP style inserts and is listed as compatible with ISCAR insert types, ensuring a straightforward match for common parting and grooving grades. Is the holder suitable for CNC turning centres? Yes; the D770TM is suitable for both conventional and CNC lathes where a 25 x 25 mm shank and right-hand operation are appropriate. How deep can reliable parting be performed with this toolholder? The holder supports a maximum parting depth of 20 mm, which defines the safe vertical engagement for groove or parting operations under normal cutting conditions. What advantages does the clamp-style mounting offer? Clamp-style mounting on the D770TM provides quick insert changes and secure retention, which helps maintain cutting stability and reduces downtime during production swaps. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 5 mm cutting width and a 25 × 25 mm shank delivers precise, stable parting and grooving performance; the left‑hand orientation and 150 mm overall length support reliable set‑ups. Order the D620TM parting clamp holder directly via Metav Werkzeuge or ask our consultants if needed. D620TM Parting clamp holder — left‑hand, 5 mm cutting width (Teknik Makina) A parting clamp holder engineered for left‑hand parting and grooving operations in turning applications, compatible with Korloy 5C MGM inserts. Left‑hand cutting orientation 5 mm cutting width for precise parting 25 × 25 mm shank for stable clamping 150 mm overall length, 0.703 kg weight Precision and productivity in every cut This clamp‑style holder is designed for accurate parting and grooving where repeatable results are required. The 5 mm cutting width ensures narrow, controlled material separation while the left‑hand geometry suits operations where the cutting feed is directed accordingly. The holder’s ISO 2525 designation identifies its standardised interface, simplifying tool selection and integration into CNC and manual lathes. By translating cutter geometry into consistent chip control, the device reduces rework and contributes to a more efficient production cycle. Rigidity and set‑up stability for consistent turning A robust 25 × 25 mm shank provides a secure clamping surface that minimises deflection during heavy cuts or interrupted cuts. With a 150 mm overall length paired with a mass of 0.703 kg, the holder balances reach and stiffness for compact tool posts and longer overhangs. The clamping concept maintains positive insert siting and decreases vibration, which in turn protects insert life and improves surface finish on the workpiece. These mechanical attributes translate directly into fewer tool changes and steadier cycle times. Compatibility and integration with insert systems The holder accepts the 5C MGM indexable insert family and is specified for use with Korloy inserts, enabling straightforward replacement and rapid set‑up in production environments. The indicated bar interface 5C‑L MGM refers to the corresponding boring bar or mounting sleeve standard for this holder type, facilitating interchangeability in modular tooling systems. For workshops standardising on Korloy inserts, the holder integrates seamlessly into existing assortments and tool carriers, reducing procurement complexity and inventory variety. Application scope and operational benefits Engineered for parting‑off and narrow grooving, the clamp holder supports a maximum parting depth of 25 mm, permitting the machining of medium‑section components and routine grooving tasks. The clamping design secures the insert during transverse loading and helps maintain dimensional tolerances over repeated cycles. As a practical choice for fabricators and subcontractors, the toolholder brings consistent performance to batch production and repair work, improving first‑pass yield and supporting predictable lead times. For robust left‑hand parting operations, request Teknik Makina’s D620TM from Metav Werkzeuge — contact our technical advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and procurement support. Technical data Article number: D620TM Manufacturer: Teknik Makina Facts Shank height: 25 mm Shank width: 25 mm Cutting width: 5 mm Maximum parting depth: 25 mm Overall length: 150 mm Weight: 0.703 kg Cutting direction: left Special features Compatible with Korloy inserts For 5C MGM insert family ISO 2525 designation Interface: 5C‑L MGM FAQ What insert type fits this holder? The D620TM holder is designed for the 5C MGM insert family and is specified for use with Korloy inserts. Is the cutting orientation right‑hand or left‑hand? The holder is supplied in a left‑hand configuration, suitable for left‑hand parting and grooving applications. What is the maximum parting depth? The tool supports a maximum parting depth of 25 mm, suitable for medium‑section work. Which shank dimensions ensure stability in the tool post? A 25 × 25 mm shank provides a rigid clamping surface to reduce deflection and vibration. What is the overall length and how does it affect set‑up? The holder measures 150 mm overall, balancing reach with stiffness for typical lathe set‑ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable clamping, compact dimensions and precise plunge control to keep parting and grooving operations consistent. The robust right‑hand design with a 5 mm cutting width and 18 mm maximum plunge depth supports predictable chip control and repeatable set‑ups — order the parting tool holder directly via Metav Werkzeuge or consult our specialists for compatibility advice. Parting tool holder D710TM — right‑hand, 25 mm clamping height, 150 mm length (Teknik Makina) Parting tool holder D710TM is a right‑hand, indexable holder designed for accurate grooving and parting on conventional and CNC lathes, suited to installers using standard Horn indexable inserts. Right‑hand cutting action 25 mm clamping and head width 5 mm cutting width for narrow grooves 150 mm overall length and sturdy mass Achieve precise parting with compact, predictable geometry The D710TM is engineered around a compact 25 mm clamping height and matching head width, which minimises overhang and supports stable cutting forces. A controlled 5 mm cutting width combined with an 18 mm maximum plunge depth allows precise removal during grooving and parting operations, reducing rework and secure set‑ups. By limiting unsupported length and offering a weighed mass of 0.73 kg, the holder reduces vibration and contributes to improved surface finish and longer tool life. The design therefore enhances process reliability and repeatability in production environments where consistent cycle times matter. Fits established insert systems for fast changeovers Compatibility with standard indexable systems simplifies tooling logistics: the holder accepts Horn indexable inserts and is specified to ISO 2525, with a clamping shank reference 5C‑R S224 for quick integration. This alignment with industry norms enables swift insert replacement and predictable seating, cutting setup time and increasing machine uptime. Clear interface standards also make the holder suitable for workshops that standardise tooling across multiple machines, supporting efficient spare‑part management and faster operator training. Easy integration into turning and CNC workflows Designed for right‑hand cutting, the holder mounts in conventional toolposts and turret systems without additional adapters, while the 150 mm overall length maintains a compact footprint in the toolpost. The plain, industry‑orientated geometry allows straightforward indexing and secure clamping, so set‑ups are repeatable under production pressures. For CNC applications, the holder’s dimensions and balanced mass support higher feed stability and predictable chip formation, helping to protect both workpiece tolerances and indexable insert life. Practical benefits for workshop efficiency and quality assurance Beyond dimensional accuracy, the D710TM places emphasis on pragmatic workshop advantages: faster setup, reduced vibration and fewer rejected parts. The right‑hand configuration and standard interface shorten lead times for tool changes and inventory planning. When combined with Metav’s sourcing and technical guidance, the assembly forms a dependable part of the production chain, delivering measurable gains in throughput and process stability without complex retrofits. For tailored advice on integrating the D710TM into an existing tooling system or to confirm insert compatibility, contact Metav Werkzeuge for professional guidance and reliable supply. Technical Data Article number: D710TM Manufacturer: Teknik Makina Designation: Stechklemmhalter ISO designation: 2525 Compatible inserts: Horn Facts Overall length: 150 mm Clamping/holder height: 25 mm Head width: 25 mm Cutting width: 5 mm Maximum plunge depth: 18 mm Weight: 0.73 kg Cutting direction: right Special features Compatible with Horn indexable inserts Clamping shank reference: 5C‑R S224 Right‑hand parting action Compact design for reduced overhang FAQ What cutting direction does the holder use? The parting tool holder D710TM is configured for right‑hand cutting, suitable for standard right‑hand parting and grooving operations. Which inserts fit the D710TM? The holder is compatible with Horn indexable inserts and adheres to ISO 2525 interfaces; check the Horn insert catalogue for matching grades and shapes. What are the key dimensions to consider for set‑up? Essential dimensions are a clamping height and head width of 25 mm, an overall length of 150 mm and a cutting width of 5 mm; these help determine toolpost fit and overhang. Can the D710TM be used on CNC lathes as well as conventional machines? Yes — the compact 150 mm length and sturdy mass make the holder suitable for both CNC and conventional lathe toolposts, offering stable performance in automated turning cycles. How does the D710TM improve process reliability? By combining reduced overhang, a secure clamping interface and a defined plunge depth of 18 mm, the holder reduces vibration and enhances repeatability, contributing to fewer rejects and longer insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining secure clamping with a compact, left-hand cutting geometry, this toolholder delivers stable parting and grooving performance for medium-duty turning. Featuring a 25 mm head width and a 5 mm blade, it supports Korloy indexable inserts and fits 5C-L shanks — order via Metav Werkzeuge or contact the consultants for application advice. Parting clamp holder D812TM — left-hand parting & grooving toolholder by Teknik Makina, 25 mm head The Parting Clamp Holder D812TM is designed for reliable parting and grooving operations on lathes and turning centres, accepting standard indexable inserts and 5C-L shank bores Left-hand cutting direction 25 mm head width for robust support Compatible with Korloy MGM 5 inserts ISO 2525 shank designation Stable clamping that reduces chatter and rework The D812TM acts as a parting clamp holder engineered to keep the cutting edge rigid under load. Thanks to a 25 mm head width and a compact but stiff design, the holder minimises vibration during cut-off operations, which reduces the risk of workpiece distortion and tool wear. The left-hand cutting geometry is integrated to match lathe setups that require right-hand facing from the operator’s perspective, providing consistent engagement and safer chip flow when used with suitable inserts. Clear compatibility for fast setup and proven inserts Designed to accept Korloy indexable inserts (type MGM 5) and to mount in standard 5C-L bores, the holder simplifies toolroom logistics and changeovers. The ISO 2525 designation ensures interchangeability with matching shank systems, while the shank diameter of 50 mm and the overall length of 150 mm deliver predictable positioning in the toolpost. This compatibility reduces setup time and supports repeatable datum positioning, which is especially valuable for batch production and frequent tool swaps. Performance data explained for practical benefits Key dimensions such as a 5 mm blade width and a maximum cutting diameter of 80 mm define the working envelope and the intended use: precise parting and narrow-grooving tasks rather than heavy shoulder turning. The design includes a maximum stech depth of 20 mm for the insert sword, enabling controlled penetration without overstressing the insert. At a weight of 0.721 kg, the holder balances mass for damping with manageable handling during installation, helping to maintain cycle times while protecting insert life. Workflow improvements and maintenance advantages Using this holder with correctly specified inserts and feeds leads to fewer interrupted cycles and lower tool consumption, improving overall process efficiency. The clamping concept permits quick insert replacement and secure fixation, which reduces downtime during shifts. For workshops aiming to streamline tooling, the combination of standard shank interfaces, robust head geometry and left-hand orientation supports consistent results across multiple machines and operators. For application-specific recommendations and stock availability of the Teknik Makina D812TM parting clamp holder, contact Metav Werkzeuge for personalised advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D812TM Manufacturer: Teknik Makina Data Weight: 0.721 kg Overall length: 150 mm Shank diameter: 50 mm Max cutting diameter: 80 mm Head width: 25 mm Cutting blade width: 5 mm Maximum parting depth: 20 mm Cutting direction: left Special features Compatible with Korloy inserts (MGM 5) ISO designation: 2525 Boreshank compatibility: 5C-L (50-80) Shank cutting length: 25 mm Robust compact design for reduced vibration FAQ What insert types fit this holder? The D812TM parting clamp holder accepts Korloy indexable inserts, specifically the MGM 5 type, providing a standardised solution for grooving and parting tasks. Is this holder suitable for my 50 mm shank toolpost? Yes, the holder is specified with a 50 mm shank diameter and mounts in compatible 5C-L bores, matching common toolpost interfaces. What is the maximum cutting diameter that can be handled? The D812TM supports a maximum cutting diameter of 80 mm, making it suitable for medium-diameter parting and narrow grooving operations. Does the holder require a right-hand or left-hand configuration? This model features a left-hand cutting direction, intended for setups that require left-oriented cutting geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a left-hand parting and grooving solution that combines secure clamping, broad insert compatibility and compact dimensions for predictable cycle times — ideal for batch turning and precise cut-off operations. Benefit from the holder’s compatibility with Korloy MGM 5 inserts and a maximum cutting diameter of 110 mm. Order directly via Metav Werkzeuge or consult our specialists for application guidance and rapid delivery. Parting and Grooving Clamp Holder D816TM — Left-hand parting and grooving toolholder, Korloy MGM 5 compatible (Teknik Makina) A robust parting and grooving clamp holder, D816TM, designed for left-hand turning operations and engineered to accept Korloy MGM 5 inserts for controlled parting cuts in production and workshop environments. Left-hand cutting orientation Compatible with Korloy MGM 5 inserts Max cutting diameter 110 mm Compact 25 mm clamp head Reliable clamping for consistent parting accuracy The clamp head is engineered to give a secure hold on the insert while maintaining repeatable cutting geometry. With a head width of 25 mm and an insert support geometry that accommodates the specified insert form, the holder reduces insert movement under load and therefore stabilises cut-off operations. This structural reliability converts directly into flatter learning curves at set-up, fewer scrap parts and reduced rework — a measurable production advantage for repetitive turning tasks. Built for industrial compatibility and flexible tooling Designed to accept Korloy MGM 5 inserts, the holder allows standardisation across toolrooms that already employ Korloy grades. The tool supports a maximum cutting diameter of 110 mm and a cutting-edge width of 5 mm, enabling common parting and grooving profiles without the need for bespoke tooling. Standard clamping and the ISO designation 2525 on the mounting interface simplify integration with existing turret and toolpost systems, lowering changeover time and increasing machine uptime. Practical benefits in handling and set-up At an overall length of 150 mm and a mass of 0.716 kg, the unit balances compactness with sufficient rigidity for stable cuts. The parting depth capability of 20 mm supports moderate cross-section separations while the shank diameter of 80 mm ensures a secure mounting in compatible toolholders or bar-style bores. Quick, positive clamping of the insert reduces set-up complexity; the holder’s straightforward geometry makes insert changes and visual inspections faster, contributing to shorter maintenance windows. Durability, performance and workshop efficiency Materials and hardening specifications are chosen to provide durability under normal turning loads; the clamping design resists loosening and supports a consistent cutting edge position. These features help to extend insert life and offer predictable cycle times, improving overall equipment effectiveness. For operations requiring a left-hand tool, this holder provides a practical blend of rigid support and accessible maintenance, making it suitable for small-batch production as well as recurring series work. For dependable left-hand parting results, contact Metav Werkzeuge GmbH to verify fitment and order the D816TM directly from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised technical advice and availability. Technical Data Article number: D816TM Manufacturer: Teknik Makina SKU: D816TM Compatible inserts: MGM 5 (Korloy) Cutting direction: left Facts Max cutting diameter: 110 mm Shank diameter: 80 mm Overall length: 150 mm Clamp head width: 25 mm Cutting width (insert): 5 mm Maximum parting depth: 20 mm Weight: 0.716 kg ISO designation: 2525 Special features Suitable for Korloy MGM 5 inserts Shank adaptor: 5C-L (80-110) Left-hand parting and grooving configuration Designed for secure insert clamping and repeatable geometry FAQ What insert types are compatible with the holder? The holder accepts Korloy MGM 5 inserts; the clamping geometry is matched to that insert family for secure seating and stable parting performance. Is the tool suitable for left-hand turning only? Yes. The unit is configured for left-hand cutting orientation and is intended for left-hand parting and grooving operations. What is the maximum cutting diameter supported by the holder? The clamp holder supports a maximum cutting diameter of 110 mm, enabling a variety of parting and grooving tasks within that envelope. How deep can the tool cut in a single pass? The maximum parting depth is 20 mm, suitable for common cut-off depths in workshop and light production settings. What mounting options are available for the shank? The tool is supplied with the shank diameter of 80 mm and is compatible with the specified 5C-L (80-110) bore adaptation for secure mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid holder that combines precise clamping with broad insert compatibility to keep parting and grooving processes efficient and repeatable; order directly via Metav Werkzeuge or consult our specialists for application advice. Parting Tool Holder D796TM — right-hand holder with 5 mm blade width by Teknik Makina A right-hand Parting Tool Holder D796TM designed for accurate parting and narrow-groove work on lathes, compatible with Korloy MGM 5 indexable inserts and ISO 2525 shank format Right-hand cutting direction 5 mm blade width for narrow parting Compatible with Korloy MGM 5 inserts Max cutting diameter 110 mm Precision clamping for consistent parting results The holder is engineered for repeatable parting operations thanks to a stable clamping interface and a 25 x 25 mm shank that fits standard toolposts. With a cutting height of 45 mm, the design offers correct insert alignment to minimise deflection and rework. A secure clamping mechanism preserves insert position during high-force cuts, which translates into predictable cycle times and reduced scrap rates — a direct efficiency gain for series production or workshop jobs where consistency is critical. Broad compatibility that speeds up setup Compatibility with Korloy MGM 5 inserts and the ISO designation 2525 reduces tooling variants and changeover time. The holder accepts the specified 5C-R (80-110) bar interface and supports operations up to a max Ø 110 mm, enabling use across a wide range of diameters without additional adapters. For buyers unfamiliar with indexable terminology: the insert type denotes the insert geometry and size family, which determines the cutting edge available and the ease of replacement. This compatibility minimises procurement complexity and shortens machine downtime. Robust geometry for productivity and tool life A 5 mm blade width and a maximum parting depth of 20 mm provide a balance between narrow kerf efficiency and structural rigidity. The overall length of 150 mm and a compact mass of 0.716 kg make the holder easy to position while maintaining damping against chatter in interrupted cuts. The combination of compact dimensions and focused cutting geometry supports longer insert life and fewer regrinds, yielding lower operating costs per component. Where surface finish matters, the stable set-up helps maintain consistent edge engagement and better part quality. Choose Teknik Cutting Tools' D796TM holder for dependable, productive parting applications — contact Metav Werkzeuge for tailored technical advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D796TM Manufacturer: Teknik Makina Product: Parting tool holder Numbers / Core technical data Shank head width: 25 mm Cutting height: 45 mm Blade width: 5 mm Max cutting diameter: 110 mm Maximum parting depth: 20 mm Overall length: 150 mm Weight: 0.716 kg Suitable diameter (guideline): 80 mm Designs / Special features Compatible inserts: MGM 5 Compatible insert manufacturer: Korloy ISO designation: 2525 Bar/holder interface: 5C-R (80-110) Cutting direction: right Cutting head width: 25 mm Randel (knurling) tool height reference: 25 mm FAQ What insert type fits this holder? The holder accepts MGM 5 indexable inserts and is specified for Korloy insert geometries; this ensures quick insert changes and standardised edge forms. Is the holder suitable for heavy-duty parting on large diameters? Designed for operations up to a max Ø 110 mm, the holder offers a robust shank and clamping to handle many parting tasks; for very heavy-duty cuts, assess machine rigidity and recommended cutting parameters. How does the right-hand orientation affect use? Right-hand cutting means the insert cuts when moving from left to right relative to the spindle; the orientation should match the machine setup and component geometry to ensure correct chip flow and tool engagement. Can the holder be used for grooving as well as parting? Yes — with a 5 mm blade width and controlled parting depth, the design supports narrow grooving operations where a slim kerf and high accuracy are required. What are the physical dimensions that affect mounting? Key dimensions are the 25 x 25 mm shank interface, an overall length of 150 mm, and a cutting height of 45 mm, which determine compatibility with standard toolposts and fixture clearances. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from robust clamping, coolant-through capability and precise left-hand cutting geometry to maintain consistent turning performance and minimise rework. Combine stable insert support and an optimised 93° cutting angle for reliable chip control; order the SVJCL 2525 directly via Metav Werkzeuge or consult our specialists for application advice. SVJCL 2525 Clamping Holder — left-hand turning holder with internal coolant by Teknik Makina SVJCL 2525 Clamping Holder is a left-hand external turning tool holder engineered for VCMT/DCMT indexable inserts and coolant-through machining in metalworking lathes Left-hand turning orientation for opposed cuts Internal coolant for enhanced chip evacuation Compatible with VCMT and DCMT 11T3 inserts ISO designation SVJCL 2525, shank M16-IK Stable left-hand turning for predictable results The holder is designed to deliver stable clamping in left-hand operations, which is especially relevant for opposed turning and specialised fixture setups. With a 93° cutting angle and a 35 mm cutting height, the geometry has been selected to reduce cutting forces and to maintain insert seating under load. This results in fewer interruptions for retightening and a more consistent surface finish, helping workshops maintain throughput without sacrificing control. Secure insert fixation and broad compatibility A firm clamping system and standardised seating enable quick changeovers and repeatable positioning for VCMT and DCMT indexable inserts such as DCMT 11T3. The holder’s ISO designation SVJCL 2525 clarifies shank form and mounting dimensions, while the shank specification M16-IK fits common boring-bar set-ups. These features mean the toolholder is suitable for a wide range of external turning tasks, where repeatability and secure fixation reduce downtime and scrap. Coolant-through design that supports tool life The integrated internal coolant channel is routed to the cutting zone to improve chip evacuation and cooling, which in turn diminishes thermal load on the insert and workpiece. For operations with moderate to heavy material removal, targeted coolant delivery can extend insert life and maintain cutting-edge integrity. Maintenance is straightforward: the Torx fastener specification (T15 key, M3.5x11 screw) has been selected for common workshop tooling and simple access during insert changes. Practical dimensions and workshop integration At 150 mm overall length with a holder width and height of 25 mm and a cutting-head width of 32 mm, the unit balances rigidity and accessibility in confined toolposts. Weighing 0.735 kg, it provides the mass required for stability without excessive inertia when indexing or repositioning. The holder’s form factor is compatible with standard toolposts and enables a compact setup where space is limited, while retaining the rigidity needed for accurate external turning. Arrange a technical consultation with Metav Werkzeuge to specify the SVJCL 2525 clamping holder for left-hand turning applications or to verify compatibility with existing toolposts and inserts. Technical data SKU: AP536TM Manufacturer: Teknik Makina Designation: SVJC for VCMT indexable inserts (SVJCL 2525) Direction: left-hand Core measurements Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting-head width: 32 mm Cutting height: 35 mm Cutting angle: 93° Weight: 0.735 kg Features and compatibility Compatible inserts: VCMT, DCMT 11T3 Internal coolant: yes U-plate: TA034 Torx key: T15 Torx screw: M3.5x11 Shank designation: M16-IK FAQ What inserts can be used with this clamping holder? The SVJCL 2525 clamping holder is compatible with common VCMT and DCMT indexable inserts, including DCMT 11T3 types. Is the holder suitable for coolant-through machining? Yes, the holder features internal coolant routing to the cutting zone to aid chip evacuation and tool life. Does this holder support left-hand turning only? The toolholder is configured for left-hand cutting direction and is intended for left-hand turning applications. What are the key dimensions to check for toolpost compatibility? Check the overall length (150 mm), holder width and height (both 25 mm) and the shank designation M16-IK for compatibility with the existing toolpost. Which fasteners are required for insert clamping and maintenance? Insert and clamping maintenance use a Torx T15 key and an M3.5x11 mounting screw as specified for the unit. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 17 mm cutting diameter, internal coolant and compatibility with CCMT 0602 indexable inserts delivers reliable T‑slot machining with consistent chip control and long tool life; order directly via Metav Werkzeuge or consult our specialists for application advice. T‑nut cutter TKC146TM — 17 mm diameter, internal coolant, for CCMT 0602 indexable inserts (Teknik Makina) The T‑nut cutter TKC146TM is a precision T‑slot milling tool designed for secure, repeatable slot production in workshop and light industrial environments using CCMT 0602 indexable inserts. 17 mm cutter diameter Internal coolant for improved chip evacuation Compatible with CCMT 0602 inserts Shank Ø16 mm for secure clamping Precision slotting with proven insert system The cutter is built around the widely used CCMT 0602 indexable inserts, providing a cost‑effective approach to T‑slot production through quick insert changes and consistent cutting geometry. The moderate 17 mm tool diameter balances accessibility with stability, enabling accurate slot profiles without overloading toolholders. This configuration simplifies tool management in production: standard inserts mean predictable wear behaviour and straightforward stockkeeping, while the maintained geometry supports repeatable tolerances in serial work. Effective cooling and chip control for longer tool life Equipped with internal coolant, the tool channels cutting fluid directly to the cutting edge to aid lubrication and chip evacuation. This feature reduces heat generation at the cutting zone and assists in clearing chips from the T‑slot, which in turn prolongs insert life and reduces rework. For shops aiming to increase throughput, the coolant‑through option supports higher cutting parameters where coolant access is limited, improving process stability when machining interrupted profiles or deeper slots. Robust shank and secure clamping for stable machining A shank Ø16 mm and an overall length 150 mm provide the rigidity required for precise machining of T‑slots while keeping overhang manageable for common toolholders. The tool features a 30 mm cutting length and two cutting edges, a combination that maintains cutting efficiency and reduces vibration. Insert retention uses a Torx fastening system (key T7, screw M2.2x5) for secure mounting and easy replacement, making maintenance predictable and fast in a production environment. For reliable T‑slot milling with Teknik Makina quality, contact Metav Werkzeuge to discuss the TKC146TM and arrange supply from our Emmerich site. Technical data Article number: TKC146TM Product type: T‑nut cutter Label: 17 mm T‑nut cutter CCMT 0602 L150 mm with internal coolant SKU: TKC146TM Facts Diameter: 17 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 30 mm Weight: 0.205 kg Cutting edges: 2 Special features Internal coolant Compatible with CCMT 0602 indexable inserts Torx key: T7 Torx screw: M2.2x5 Manufacturer: Teknik Makina FAQ Which inserts are compatible with this cutter? The TKC146TM accepts CCMT 0602 indexable inserts; these are industry standard for the specified cutting geometry. Is coolant supplied to the cutting edge? Yes — the cutter features internal coolant, delivering fluid directly to the insert zone for improved cooling and chip removal. What shank size is required for clamping? Clamping requires a toolholder that accepts a 16 mm shank for secure mounting and stable machining. How long is the tool and how much cutting length is available? The tool has an overall length of 150 mm with a 30 mm effective cutting length. Which brand and model should be referenced when ordering? Order or reference the Teknik Makina T‑nut cutter TKC146TM for exact match and compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T‑slot milling with internal coolant and reliable compatibility with CCMT 0602 indexable inserts; the robust 16 mm shank and 18 mm cutting diameter minimise vibration for consistent results. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter for CCMT 0602 indexable inserts — 18 mm, internal coolant (Teknik Makina) A T-slot cutter designed for precision T‑slot milling in CNC and manual setups, compatible with CCMT 0602 indexable inserts and equipped with internal coolant for improved chip evacuation and tool life Internal coolant for consistent chip evacuation Compatible with CCMT 0602 indexable inserts 18 mm cutting diameter for standard T‑slot profiles 16 mm shank with 150 mm overall length Engineered for efficient, stable T‑slot production The cutter is built around the proven CCMT 0602 insert system, offering fast insert replacement and predictable cutting geometry while keeping setup times low. With an 18 mm cutting diameter and 32 mm cutting length on the shank, the tool provides sufficient engagement for most T‑slot profiles without excessive overhang. The 16 mm shank delivers the rigidity required to reduce chatter and maintain surface quality, so components leave the machine within tolerance more consistently. Internal coolant further supports continuous cutting by directing lubricant directly to the cutting edge, reducing heat and improving tool life. Minimised downtime and straightforward maintenance Indexable inserts mean maintenance is limited to periodic insert and screw checks rather than full regrinds, improving overall equipment effectiveness. The cutter uses a Torx T7 key and M2.2x5 Torx screws, making insert changes quick and standardised across production teams. At a modest mass of 0.207 kg, the tool is easy to handle during tool changes while remaining stable in the holder. These design choices translate into measurable productivity gains: fewer unplanned stops, faster reconditioning and a smoother production flow. Practical integration into workshop workflows Designed for compatibility with common toolholders and industrial setups, the cutter suits both small-batch precision work and larger CNC runs where reproducibility matters. The indexable system supports economical use of carbide inserts and allows tailored grades to be applied where material or finishing demands vary. Combined with Metav’s reliable supply chain and technical guidance from Emmerich, this tool becomes part of a pragmatic approach to tooling that balances performance, availability and long‑term cost efficiency. For tailored advice on integrating the Teknik Makina TKC150TM into current machining processes or to source the cutter directly from Metav Werkzeuge, contact our specialists in Emmerich for practical procurement and application support Technical Data SKU: TKC150TM Brand: Teknik Makina Eclass: 21180605 Label: 18mm T‑slot cutter CCMT 0602 L150mm with internal coolant Numbers / Core data Cutting diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length (shank): 32 mm Number of cutting edges: 2 Weight: 0.207 kg Design / Special features Internal coolant: yes Compatible inserts: CCMT 0602 Torx key: T7 Torx screw: M2.2x5 Product type: T‑slot cutter SKU: TKC150TM FAQ Which insert geometry is required for this cutter? The cutter is designed for CCMT 0602 indexable inserts; using the correct CCMT geometry ensures the intended cutting profile and secure clamping for the Teknik Makina TKC150TM. Does the tool support through‑coolant supply? Yes, the tool features internal coolant, which channels coolant to the cutting edge for improved chip control and thermal management during longer cycles. What shank size and holder compatibility should be expected? The tool has a 16 mm shank diameter and a 150 mm overall length, making it compatible with holders that accept 16 mm shanks and providing a balance of rigidity and reach for typical T‑slot operations. How are inserts secured and changed on the cutter? Inserts are fastened with M2.2x5 Torx screws using a T7 key, enabling quick and repeatable insert changes without special tools. Is this cutter suitable for high‑volume CNC machining? Yes, the combination of indexable CCMT 0602 inserts and internal coolant makes the cutter suitable for continuous CNC use where predictable tool life and fast insert replacement reduce machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine integrated internal coolant and robust Torx clamping for consistent internal-thread production; compatible with 12 IR indexable inserts and a compact Ø16 mm shank for tight bores. Order the threading boring bar directly via Metav Werkzeuge or ask our consultants if needed. Threading boring bar K327-2TM — Internal-thread holder for 12 IR indexable inserts, Ø16 mm | Teknik Makina The threading boring bar K327-2TM is a specialised internal-thread holder engineered for reliable machining of internal threads with IR-style indexable inserts in confined bores and CNC turning centres. Internal coolant for improved chip evacuation Compatible with 12 IR indexable inserts Ø16 mm shank, overall length 150 mm Torx fastening M3.5x11 with T8 key Precise chip control for repeatable thread quality The holder integrates internal coolant, which directs the coolant and air through the bar to the cutting edge; this improves chip evacuation and reduces thermal load during continuous operation. By keeping the cutting zone clear, the system promotes consistent thread form and extends insert life. For workshops aiming to reduce rework and ensure repeatable results, the coolant-fed configuration is an effective measure to maintain cycle-time stability and surface integrity. Stable clamping and secure insert fixation for reduced vibration A rigid fastening system with a Torx M3.5x11 screw and matching T8 key secures the indexable insert reliably in the pocket, minimising micro-movement during cutting. The robust clamping reduces chatter and supports a stable cutting geometry, which directly benefits thread tolerance and surface finish. The compact overall length and engineered shank contribute to controlled overhang and improved dynamic performance on lathes and machining centres. Compatibility designed for quick changeover and consistent performance Optimised for 12 IR indexable inserts, the toolholder allows fast insert replacement and repeatable positioning, cutting downtime in tool-changing routines. The combination of a standard insert format and a clear clamping interface simplifies stock management and reduces the range of consumables required. For production environments where uptime and predictable tool behaviour matter, this approach delivers a measurable efficiency gain and easier process control. Compact dimensions that suit tight bores and industrial workflows With a Ø16 mm shank and an overall length of 150 mm, the bar is intended for applications where space is limited yet thread accuracy cannot be compromised. The geometry supports confined bores without sacrificing access to the cutting edge, making it suitable for small-to-medium internal-threading tasks in serial production. The design balances reach and stiffness, offering a practical compromise between tool access and machining stability. For dependable internal-thread production with integrated internal coolant and standard 12 IR compatibility, contact Metav Werkzeuge for ordering advice or technical consultation — Metav Werkzeuge is ready to assist from Emmerich; e-mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: K327-2TM Manufacturer: Teknik Makina Description: for Inside Thread for IR indexable inserts Dimensions & core data Diameter: 16 mm Overall length: 150 mm Torx screw: M3.5x11 Torx key: T8 Compatibility & features Suitable for 12 IR indexable inserts Internal coolant Torx fastening system FAQ Which inserts fit this toolholder? The threading boring bar K327-2TM is compatible with 12 IR indexable inserts, enabling straightforward use of standard IR-format threading cutters. Is coolant delivered through the holder? Yes, the holder features internal coolant to the cutting zone, improving chip evacuation and thermal management during threading. What are the shank and overall dimensions? The toolholder has a Ø16 mm shank and an overall length of 150 mm, designed for compact internal-thread applications. How is the insert secured? The insert is fixed with a Torx M3.5x11 fastening screw tightened using a T8 key for secure clamping and repeatable positioning. Which brand manufactures this tool? The tool is manufactured by Teknik Makina and sold under the K327-2TM designation for internal-threading with IR inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of solid carbide construction, internal coolant, and precise fit for IR11 indexable inserts to achieve consistent internal threads and reduced setup time; order the component directly via Metav Werkzeuge or consult our experts for application-specific advice. KE72TM Threading Bar (for Inside Thread) — Solid carbide, internal coolant KE72TM Threading Bar is a compact, right-hand internal threading solution suited for machining confined bores and producing consistent internal threads in demanding workshops and light production environments Solid carbide body for long tool life Internal coolant for reliable chip control 12 mm diameter with 150 mm overall length Consistent internal threads with industrial reliability This tool is built from solid carbide to deliver high rigidity and wear resistance when forming internal threads, which translates into fewer interruptions for tool changes and greater process stability. The E10M designation indicates a standardised shank geometry for secure clamping, while the 10 mm shank diameter ensures compatibility with common holders. With a right-hand cutting geometry and 7.4 mm cutting height, the design focuses on repeatable profiles and predictable chip formation, helping maintain part tolerances across medium-series production. Faster cycles and better chip evacuation for clean bores Integrated internal coolant channels keep the cutting zone fed directly, improving lubrication and flushing chips away from the cutting edge. This reduces the risk of built-up edge and minimises rework caused by chip packing in blind holes. The relatively slim 12 mm diameter combined with a 150 mm overall length offers a balance between reach and stiffness, enabling efficient machining of internal threads while keeping cycle times competitive. The combination of coolant delivery and carbide geometry supports higher cutting parameters compared with conventional HSS tooling. Simple maintenance and secure indexable insert system Compatibility with IR11 indexable inserts simplifies insert changes and reduces downtime: replacement requires only the Torx T8 key and the supplied M2.5x5.5 Torx screw, which streamlines service procedures at the bench. The lightweight construction (approx. 0.085 kg) and the standardised E10M shank make handling and setup straightforward, while the tool’s robust materials help extend life between maintenance intervals. For operations seeking predictable tool behaviour and straightforward insert management, this threading bar offers a practical, low-hassle solution. For application-specific recommendations or procurement from our European distribution, contact Metav Werkzeuge in Emmerich — technical advice and parts sourcing are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: KE72TM Manufacturer: Teknik Cutting Tools Designation: Threading bar for inside thread (E10M) Facts Diameter: 12 mm Overall length: 150 mm Shank diameter: 10 mm Cutting height: 7.4 mm Weight: 0.085 kg Special features Material: Solid carbide Internal coolant: yes Cutting direction: right-hand ISO designation: E10M Compatible with IR11 indexable inserts Torx key: T8 Torx screw: M2.5x5.5 FAQ What materials can be machined with this threading bar? The KE72TM threading bar is made from solid carbide and is intended for standard machining tasks; suitability for specific workpiece materials should be confirmed with machining parameter tests or by consulting Metav Werkzeuge. How is coolant supplied to the cutting zone? Coolant is delivered through internal channels in the tool body, ensuring directed flushing at the cutting edge for improved chip evacuation and lubrication. Which insert system fits this tool? The bar is compatible with IR11 indexable inserts; insert changes are secured with the included M2.5x5.5 Torx screw and a T8 key. Is the shank compatible with common clamping systems? Yes, the tool uses an E10M shank designation for standard clamping; the shank diameter is 10 mm for holders designed to accept E10M tools. Can this tool be used for blind holes? The internal coolant and right-hand cutting direction support operations in blind holes, but final suitability depends on hole depth and thread requirements; please consult machining data or Metav Werkzeuge for guidance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact toolset that combines rigid clamping, precise Ø 23.5 mm cutting and fast insert replacement for efficient cycle times; order directly via Metav Werkzeuge or consult our specialists for machining advice. Indexable Insert Drill – Ø 23.5 mm, 25 mm shank by Teknik Makina The Indexable Insert Drill is a purpose-built CNC drilling solution for medium‑diameter holes, designed to use SPMG‑style inserts for high productivity in workshop and production environments. 25 mm shank for rigid clamping Ø 23.5 mm cutting diameter 69 mm effective cutting length Compatible with SPMG 07T3 inserts Stable performance for repeatable holemaking The holder is engineered to deliver consistent hole quality through a combination of a 25 mm shank and a stiff body that reduces chatter and runout. This design lowers scrap rates and reduces rework because the tool maintains positional accuracy across long production runs. With an Ø 23.5 mm cutting diameter and a 69 mm cutting length, the tool balances rigidity and reach so that operators benefit from predictable, repeatable results even at higher feed rates. Fast insert changes and proven compatibility Interchangeable SPMG 07T3 inserts allow for quick index and replacement, which keeps machine downtime to a minimum. The tool is specified to accept inserts from established manufacturers such as Taegutec and YG‑1, ensuring a broad supply base and straightforward sourcing. The cartridge-style insert pocket simplifies seating and alignment so that the changeover process is efficient and reliable, supporting lean production practices. Workshop‑friendly dimensions and handling With an overall length of 150 mm and a shank length of 56 mm, the tool fits a wide range of toolholders while preserving adequate overhang for many standard drilling set-ups. The moderate mass of 0.412 kg keeps handling safe for technicians and simplifies balancing for high‑speed spindles. The combination of compact external dimensions and robust construction supports easy tool management in both single‑machine shops and larger cell production. Efficiency advantages on the shop floor Using indexable inserts reduces per‑hole cost compared with brazed or solid drills because only the insert is consumed during wear, not the entire tool body. The tool’s geometry promotes reliable chip control and encourages efficient chip evacuation, which contributes to longer insert life and fewer interruptions for clearing chips. For production environments seeking measurable gains in throughput, this toollist component supports an economical, high‑availability strategy. Contact Metav Werkzeuge for tailored application support and to discuss the Teknik Makina U823-1TM indexable insert drill with Ø 23.5 mm and 25 mm shank Technical Data Article number: U823-1TM Manufacturer: Teknik Makina Core dimensions Diameter: 23.5 mm Cutting length: 69 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 150 mm Weight: 0.412 kg Special features Compatible inserts: SPMG 07T3 Compatible insert manufacturers: Taegutec, YG-1 Tool type: Indexable insert drill FAQ Which inserts fit this drill? The drill accepts SPMG 07T3 inserts; compatible suppliers listed include Taegutec and YG‑1, allowing flexible sourcing. What are the key dimensions to check for set‑up? Relevant dimensions are a 23.5 mm cutting diameter, 69 mm cutting length, 25 mm shank diameter and 150 mm overall length. How quickly can inserts be changed? Insert replacement is designed for rapid index changes; the pocket geometry supports straightforward seating to reduce machine downtime. Is the tool suitable for automated tool‑changer systems? With a compact overall length of 150 mm and a standard 25 mm shank, the tool is compatible with typical automated tool‑changer setups when the holder accepts the shank diameter. What is the product code for ordering? Order reference: U823-1TM (Teknik Makina indexable insert drill) Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact toolholder that combines secure clamping and controlled reach for consistent turning setups; its 25 x 25 mm cross-section and 150 mm overall length enable stable installation and efficient chip clearance. Order or request advice directly via Metav Werkzeuge to integrate this toolholder into production layouts. Clamping Holder L150mm (P093TM) — 25 x 25 mm cross-section, 30° cutting angle by Teknik Makina The Clamping Holder L150mm is a compact toolholder designed for turning and lathe applications, offering a low-profile cross-section and a 30° approach to improve accessibility and chip flow in confined setups 25 x 25 mm compact cross-section 150 mm overall length 30° cutting angle for versatile setups Stable, low-profile geometry for precise toolholding The holder's 25 x 25 mm cross-section gives a compact footprint that reduces interference in multi-tool turrets and tight fixtures while maintaining rigid clamping. This geometry translates into repeatable positioning and less vibration during cuts, which supports higher process stability. For workshops that standardise on metric toolposts, the reduced overhang assists in keeping cutting forces predictable and tool life consistent. Reach and balance to suit diverse turning setups With an overall length of 150 mm and a mass of 0.594 kg, the component offers a balanced compromise between reach and stiffness. The length provides sufficient extension for medium-reach operations without excessive cantilever, enabling simpler setups and fewer auxiliary extensions. The modest weight contributes to dynamic stability in rotating assemblies and helps maintain alignment across repeated cycles. 30° approach angle for improved chip control and access The 30° cutting approach gives a practical balance between clearance and cutting force direction, making the holder suitable for common turning operations where access or tool shank clearance is limited. The inclined geometry assists chip evacuation and can reduce contact length at the insert edge, which in many cases helps to moderate cutting temperatures and improve surface finish without changing cutting parameters drastically. Clear specification and straightforward integration into toolroom systems Supplied under SKU P093TM and complying with an ISO 2525 designation, the unit is specified for straightforward integration into existing clamping systems. The concise set of measurable characteristics — compact cross-section, defined length and angle — simplifies process planning and tooling lists. Manufactured by Teknik Cutting Tools, the holder supports efficient inventory management for workshops seeking consistent, repeatable toolholder performance. Contact Metav Werkzeuge for tailored advice on system compatibility and to arrange procurement of the Teknik Cutting Tools clamping holder — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P093TM Label: Klemmhalter L150mm Manufacturer: Teknik Makina Dimensions & weight Overall length: 150 mm Cross-section: 25 x 25 mm Weight: 0.594 kg Cutting angle: 30° Standards & identification ISO designation: 2525 Product type: Clamping holder eClass: 21181004 FAQ What are the main dimensions of this clamping holder? The clamping holder has a cross-section of 25 x 25 mm and an overall length of 150 mm. Which cutting angle does the holder provide and what is its advantage? The holder features a 30° cutting angle; this approach improves access and chip control in many turning operations. Is the holder identified by a product code for ordering? Yes, the item is listed under SKU P093TM for ordering and inventory purposes. Which standard or designation applies to this toolholder? The holder is specified with ISO designation 2525 and is classified under eClass 21181004. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of durable construction, consistent clamping accuracy and compact length for reliable external threading operations; order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder D266TM — compact holder for right‑hand external threading The Clamping holder D266TM is a precision clamping tool for right‑hand external threading in turning operations, engineered for integration with M22‑ER22 collet systems. Precision clamping for outside threads Compatible with M22‑ER22 collet system Compact 150 mm overall length Cutting head and holder width 25 mm Solid 0.748 kg mass for stability Consistent clamping for repeatable thread quality The D266TM clamping holder delivers repeatable clamping accuracy that reduces variation between passes and supports consistent thread profiles. Built with a 25 mm holder width and a 25 mm cutting‑head width, the tool provides stable support for the tool shank and minimises chatter. The combination of dimensional rigidity and a measurable cutting height of 30 mm helps maintain axial alignment, so cycle times remain predictable and scrap rates fall. For workshops seeking reliable production results, the holder’s design focuses on process stability rather than cosmetic features. Compact footprint that eases machine setup At an overall length of 150 mm and weighing 0.748 kg, this holder occupies little turret space while retaining sufficient mass to absorb cutting forces. The compact form factor supports multi‑tool turrets and smaller lathes without compromising accessibility to the workpiece. Because the holder is engineered for integration with standard collet systems, changeovers are simplified and set‑ups are faster — a practical efficiency gain for batch work and mixed runs. The compactness also aids in collision‑sensitive applications where tool overhang must be minimised. Proven interface and right‑hand cutting orientation Compatibility is deliberate: the holder accepts the M22‑ER22 collet/rod designation and suits 22 ER‑type tooling interfaces, ensuring straightforward integration into established clamping systems. The tool is configured for right‑hand cutting, matching common thread‑turning directions on lathes. The ISO designation AL 2525 provides a clear reference for production planners and purchasing, while the exposed numeric values enable precise verification during incoming‑goods inspection. Clear interface standards reduce guesswork at assembly and speed commissioning on the shop floor. For application guidance or to secure the Teknik Makina clamping holder D266TM via Metav Werkzeuge — including rapid supply from our Emmerich hub — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable delivery. Technical data Article number: D266TM Name: Clamping holder (Klemmhalter) Manufacturer: Teknik Makina SKU: D266TM Measurements Overall length: 150 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 25 mm Cutting height: 30 mm Weight: 0.748 kg Compatibility & features Collet/rod designation: M22‑ER22 For outside threading (external thread) Cutting direction: right ISO designation: AL 2525 ECLASS: 21181004 FAQ What clamping system does this holder use? The clamping holder D266TM is designed for the M22‑ER22 collet/rod interface, allowing secure retention with standard ER22 collets. Is the tool suitable for external thread turning with right‑hand threads? Yes, the holder is configured for right‑hand cutting and is intended specifically for outside threading operations. What are the main dimensions to check for turret clearance? Key dimensions are 150 mm overall length, 25 mm holder width and 30 mm cutting height; the mass is 0.748 kg for stability considerations. Can indexable or modular tooling be mounted with this holder? The holder supports tooling compatible with the 22 ER designation and integrates with common collet systems for modular setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise clamping, industrial robustness and straightforward installation to keep external turning operations stable and predictable; order the holder directly via Metav Werkzeuge or consult our specialists for a tailored supply solution. Klemmhalter — Clamping holder for external turning by Teknik Makina The Klemmhalter is a clamping holder designed for external turning, providing stable tool fixation for general lathe machining applications. Designed for external turning operations Compact clamping holder RP106TM Manufactured by Teknik Makina Stable clamping for consistent machining results A secure clamping arrangement reduces chatter and helps to maintain a uniform surface finish. The clamping function of this holder delivers repeatable positioning, which supports shorter setup times and fewer rework cycles. For bench and production settings where process reliability matters, the emphasis is on mechanical stability and consistent tool retention rather than decorative aspects. The result is improved productivity through reduced scrap and less downtime, driven by dependable mechanical restraint of the cutting tool. Integration into workshop workflows and machine compatibility Designed for general lathe use, the holder suits typical external turning tasks and meshes with standard workshop procedures. The product simplifies tooling routines by offering straightforward mounting and alignment on conventional tool posts, enabling quicker changeovers and predictable setup geometry. This pragmatic approach supports efficient throughput and helps maintain cycle-time targets in small-batch and series production alike while keeping the focus on operational efficiency and ease of use. Reliability under daily production demands Built by a recognised supplier, the holder emphasises durability and steady performance in repetitive machining environments. The association with Teknik Makina signals an industrial supply orientation and aligns the component with established manufacturing practices. When combined with Metav’s distribution and quality-filtering at Emmerich, the holder becomes part of a dependable supply chain that supports continuous workshop operation and reduces procurement complexity. Contact Metav Werkzeuge for procurement advice or to discuss how the Teknik Makina RP106TM clamping holder can fit specific turning applications: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RP106TM SKU: RP106TM EClass: 21181004 Product type: Clamping holder Core data No numerical specifications supplied Special features Application: External turning Label: Klemmhalter Manufacturer: Teknik Makina Category path: Zerspanen > Klemmhalter UID: RP106TM FAQ What operations is this holder intended for? The holder is intended primarily for external turning operations; the RP106TM clamping holder from Teknik Makina is specified for general lathe tool fixation. Is the clamping holder suitable for series production? Yes, the design and manufacture of this clamping holder support repetitive use in production environments, providing stable clamping and consistent tool positioning. Which SKU identifies this product? The product is listed under SKU RP106TM and labelled as a Klemmhalter (clamping holder) by Teknik Makina. How does this holder improve machining outcomes? By providing steady clamping and repeatable positioning, the holder reduces vibration and helps maintain surface finish consistency during external turning. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining precise clamping for VER22 indexable inserts with a rigid 25 mm shank and a 150 mm overall length, the holder delivers steady cutting performance and extended insert life. Order the clamping holder directly via Metav Werkzeuge or consult our specialists for application-specific advice. Klemmhalter VER22 L150mm — clamping holder for VER22 indexable inserts by Teknik Makina A robust Klemmhalter VER22 L150mm engineered to secure VER22 indexable inserts in turning applications and ensure repeatable positioning. Secure clamping for VER22 inserts 150 mm overall length 25 mm shank width Torx T15 screw M4x11 Stable clamping that keeps machining consistent The clamping system is built to provide repeatable positional accuracy for indexable tooling, reducing vibration and cutting deviation. Compatibility with VER22 indexable inserts and the ISO 2525 designation means insertion and replacement are straightforward, while the firm grip contributes to longer tool life and fewer rejects in production. The combination of precise seating and clamping force translates directly into predictable machining results and reduced setup variability. Rigidity and dimensions that reduce deflection A solid tool shank with 25 mm width and 25 mm height, paired with an overall length of 150 mm, gives a balance between reach and stiffness. The 27.5 mm cutting-head width and 30 mm cutting height are optimised to resist bending moments typical of turning operations, which helps maintain consistent surface finish and tighter tolerances. The holder’s mass of 0.705 kg contributes to dampening of minor oscillations, supporting stable chip formation and improved process reliability. Fast, secure fastening to cut downtime Maintenance and insert changes are made efficient by the Torx T15 fastening system and the specified M4x11 screw. The Torx interface offers a positive driver engagement that reduces cam‑out and allows controlled torque application, decreasing the risk of screw damage and ensuring repeatable clamp preload. Quick, reliable fastening reduces tool-change time and supports higher machine utilisation without compromising safety or repeatability. Suitable for workshop and production environments Engineered for turning applications, the holder is a pragmatic choice for workshops and production lines that require reliable, straightforward tooling. The ISO 2525 reference ensures compatibility with standardised clamping practices, while the compact form factor keeps set-up simple on conventional tool posts and turret systems. The design prioritises functionality and serviceability, helping to streamline inventory and maintenance routines. For ISO‑compliant clamping from Teknik Makina, request a quotation or technical advice from Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: D522TM Item: Clamping holder for VER22 indexable inserts Brand: Teknik Makina Core specifications Overall length: 150 mm Weight: 0.705 kg Shank width: 25 mm Shank height: 25 mm Cutting head width: 27.5 mm Cutting height: 30 mm ISO designation: 2525 Features For VER22 indexable inserts Torx T15 fastening Torx screw M4x11 Designed for turning applications FAQ Which inserts are compatible with this clamping holder? The holder is designed for VER22 indexable inserts and adheres to the ISO 2525 seating standard for secure fitment. What are the key dimensions to check for machine compatibility? Check the 150 mm overall length and the 25 mm shank width and height to ensure clearance and rigidity on the intended tool post or turret. Which fastening tool is required for the screw? A Torx T15 driver is specified for the M4x11 screw to deliver correct torque and avoid cam‑out during insert changes. Is the holder suitable for high‑speed turning? The holder’s rigid shank and positive clamping make it appropriate for many turning operations; final suitability depends on cutting parameters and machine capability. Can I order this holder using the SKU? Yes, reference SKU D522TM when enquiring to ensure the correct clamping holder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid left-hand DCLN clamping toolholder with a 95° cutting angle and an M19 shank for stable seating of CN--1906 inserts; the compact 150 mm length and 0.82 kg mass support consistent tool behaviour in serial turning. Order the DCLN clamping toolholder directly via Metav Werkzeuge or ask our consultants if needed. DCLN clamping toolholder for CN-- indexable inserts (DCLNL 2525) — left-hand, M19 shank A robust DCLN clamping toolholder engineered for left-hand external turning, optimised for CN-- 1906 indexable inserts and intended for precise CNC turning applications. Left-hand orientation for external turning ISO DCLNL 2525 format Compatible with CN-- 1906 inserts Robust M19 shank for stable clamping Precision and rigidity for consistent turning results The DCLN clamping toolholder is built to deliver precision and rigidity in repetitive turning cycles. Its 95° cutting angle is designed to support stable chip flow and predictable tool engagement; as a result, dimensional consistency is promoted and rework is reduced. The M19 shank ensures secure retention in standard tool posts, which stabilises the cutting edge under intermittent loads. Where tight tolerances are required, this combination of geometry and solid construction reduces vibration and supports repeatable machining outcomes. Compatibility that speeds set-up and stock management Compatibility with CN-- 1906 indexable inserts and the standardised DCLNL 2525 format simplifies tooling logistics in mixed-production shops. The holder accepts widely used insert geometries, meaning insert changes can be carried out quickly and clamping elements are standardised across setups. This reduces downtime during cutter changes and lowers the variety of spare parts that must be carried in the workshop. Clear ISO designation and a common shank format support straightforward integration into existing tool setups. Designed for production environments and operator confidence Dimensions have been chosen for a balance of reach and stability: a 150 mm overall length, 32 mm cutting‑head width and 25 mm holder height provide a compact but rigid footprint, while a 40 mm cutting height secures correct insert alignment. At 0.82 kg, the unit is heavy enough to feel robust yet light enough for safe handling during maintenance. The result is a toolholder that is both practical at the bench and dependable in continuous production, which helps maintain cycle-time targets and reduces process variation. For technical advice or to arrange supply from Teknik Cutting Tools via Metav Werkzeuge, request detailed integration information or order enquiries by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: D304TM Manufacturer: Teknik Makina Article: DCLN for CN-- Indexable Inserts ISO designation: DCLNL 2525 ECLASS: 21181004 Facts Holder height: 25 mm Cutting-head width: 32 mm Holder width: 25 mm Cutting height: 40 mm Cutting angle: 95° Overall length: 150 mm Weight: 0.82 kg Shank designation: M19 Cutting direction: left Special features Compatible with CN-- 1906 inserts Left-hand cutting orientation Standardised DCLNL 2525 format Designed for CNC external turning FAQ What inserts fit this toolholder? The DCLN clamping toolholder is compatible with CN-- 1906 indexable inserts and is specified to accept the common geometries associated with that designation. Is the holder suitable for right-hand turning? This toolholder is supplied in a left-hand orientation; for right-hand applications, the corresponding right-hand holder should be selected. What is the mounting or shank specification? The holder uses an M19 shank designation, which is compatible with tool posts designed for that connection standard and provides secure clamping. Does the toolholder support heavy-duty cuts? With a 95° cutting angle and robust construction, the holder is intended for stable engagement in external turning; final suitability depends on material, insert grade and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure clamping, precise compatibility with CN-- 1204 indexable inserts and a compact 150 mm overall length for reliable turning operations; improved tool life and stable chip control reduce downtime and rework. Order the DCMNN 2525 clamping holder directly via Metav Werkzeuge or ask our consultants if needed. DCMNN 2525 — Clamping holder for CN-- 1204 indexable inserts (Teknik Cutting Tools) DCMNN 2525 is a compact clamping holder designed for turning applications with CN-- 1204 indexable inserts, offering a secure M12 shank connection and a 150 mm overall length for extended reach. DCMNN 2525 for CN-- 1204 inserts 150 mm overall length for deep reach 12.5 mm cutting head width M12 shank with secure clamping Improve process stability with a secure clamping system The DCMNN 2525 clamping holder delivers consistent clamping force and repeatable seating for CN-- 1204 indexable inserts, which translates to fewer interruptions and more predictable cycle times. The holder’s engineered geometry and 50° cutting angle support reliable chip formation and reduce the risk of insert movement under load. For production environments where process stability is essential, this toolholder helps maintain tolerances and lowers the likelihood of scrap, making turning routines more efficient and less dependent on constant manual adjustment. Designed for precise compatibility and easy integration With an ISO designation of DCMNN 2525 and direct compatibility with CN-- 1204 inserts, the holder simplifies tool inventory and changeover. The 12.5 mm cutting-head width and defined cutting-height relationship allow predictable set-up heights when used with standard insert sizes, reducing set-up time at the machine. The M12 shank interface ensures a secure mechanical connection to common boring bars or tool assemblies, enabling straightforward integration into existing tool posts without the need for specialised adapters. Compact reach and handling that support versatile machining tasks The 150 mm overall length offers a balance between reach and rigidity, suitable for medium-reach turning operations where access is required without compromising stiffness. At a weight of 0.778 kg, the unit is light enough for quick handling yet substantial enough to damp vibrations in many workshop applications. The holder’s dimensions—25 mm width and 25 mm height—are optimised to fit standard turrets and cross slides, making it a practical choice for small-batch production and maintenance work where adaptability and fast changeovers are valued. Clear technical attributes that aid purchasing and application decisions Key specifications such as cutting angle 50°, cutting height 42 mm, and the M12 mount provide objective criteria for engineers selecting tooling for specific materials and operations. Compatibility with CN-- 1204 indexable inserts reduces tooling complexity and aligns with commonly available insert grades. These measurable characteristics support informed decisions about tool selection, setup parameters and expected performance, offering technical clarity for procurement and production planning. Choose the Teknik Cutting Tools DCMNN 2525 clamping holder for secure insert seating and predictable turning performance — contact Metav Werkzeuge in Emmerich for tailored advice and order coordination at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D215TM Manufacturer: Teknik Makina Designation: Klemmhalter / DCMNN for CN-- 1204 Indexable Inserts ISO designation: DCMNN 2525 SKU: D215TM Facts Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting head width: 12.5 mm Cutting height: 42 mm Cutting angle: 50° Weight: 0.778 kg Shank/bohrstangen designation: M12 Compatible inserts: CN-- 1204 Special features Compatible with CN-- 1204 indexable inserts ISO designation DCMNN 2525 Secure M12 shank clamping Compact 150 mm overall length for medium reach Designed for turning/indexable-insert applications FAQ What insert type fits this holder? The holder is designed for CN-- 1204 indexable inserts and accepts standard CN-- 1204 geometries without modification. What is the overall length and how does it affect rigidity? The overall length is 150 mm; this length provides a compromise between reach and rigidity suitable for many medium-reach turning tasks while maintaining acceptable stiffness. Which shank or connection is used for mounting? The toolholder uses an M12 shank/connection, enabling secure attachment to compatible boring bars and tool assemblies. What are the key dimensions to check for turret compatibility? Important dimensions are 25 mm holder width, 25 mm holder height and 12.5 mm cutting head width; these determine fit in standard turrets and cross slides. Is the cutting angle specified and why is it important? Yes — the cutting angle is 50°, which influences chip control and cutting forces; select the appropriate insert grade to match this geometry for optimal performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a sturdy left‑hand parting solution with a 25 mm clamping head and a 3 mm cutting width that delivers dependable separation on diameters up to 110 mm; order directly via Metav Werkzeuge or consult our specialists for integration advice. Stechklemmhalter (parting toolholder) D804TM – left‑hand, 25 mm head, 3 mm blade Stechklemmhalter (parting toolholder) D804TM is designed for precise left‑hand parting and grooving applications on lathes, compatible with Korloy inserts for fast changeovers and reliable clamping. Left‑hand cutting orientation 25 mm clamping head width Compatible with Korloy MGM 3 inserts Max cutting diameter 110 mm Precise clamping for consistent parting results The D804TM toolholder offers a stable clamping head of 25 mm, engineered to keep the insert firmly located during cut‑off operations. The combination of a 3 mm cutting width and a maximum cutting depth of 17 mm makes the holder well suited to controlled parting on workpiece diameters up to 110 mm, reducing chatter and rework. By specifying a defined shank and head geometry, the design supports reproducible set‑ups and shorter cycle times, which is critical for tight production schedules. Smooth integration and fast insert replacement Compatibility with Korloy MGM 3 indexable inserts and the ISO designation 2525 simplifies procurement and tool management, enabling straightforward insert swaps without complex adjustments. The holder’s shank designation 3C‑L (80‑110) and overall length of 150 mm allow straightforward mounting in standard toolposts, while the defined shank cutting length and blade geometry reduce alignment effort. This compatibility lowers setup time and helps maintain process stability across batches. Durable construction for repetitive turning tasks Weighing 0.72 kg and with a cutting height of 40 mm, the unit balances rigidity and manoeuvrability for repetitive grooving and parting cycles. The toolholder’s robust profile minimises flex under load, which maintains surface integrity on separated parts and extends insert life. For workshops aiming to maximise uptime, the holder’s compact yet sturdy build supports frequent changeovers and predictable tool behaviour during continuous operation. Why this holder makes sense in a production environment Specifying a dedicated left‑hand parting holder reduces the risk of incorrect orientation and tool interference during twin‑spindle or multi‑station turning. The clearly defined mechanical parameters — blade width, cutting depth and compatible insert family — provide an objective basis for process planning and purchasing decisions. Where throughput and repeatability matter, this holder helps create a reliable, measurable cutting process rather than an ad‑hoc solution. Choose Teknik Makina’s left‑hand parting option for robust, repeatable separation tasks — order the D804TM via Metav Werkzeuge or contact our consultants at Metav Werkzeuge for technical matching and delivery from Emmerich. Technical data Article number: D804TM Manufacturer: Teknik Makina Designation: Stechklemmhalter Core specifications Max cutting diameter: 110 mm Cutting width: 3 mm Cutting height: 40 mm Max cutting depth: 17 mm Clamping head width: 25 mm Shank cutting length: 25 mm Overall length: 150 mm Diameter: 80 mm Weight: 0.72 kg Features / compatibility Left‑hand cutting orientation Compatible with Korloy inserts Insert type: MGM 3 ISO designation: 2525 Shank designation: 3C‑L (80‑110) FAQ What insert type fits this holder? The holder accepts Korloy indexable inserts of the MGM 3 type; the D804TM is specified for this insert family and ISO designation 2525. What is the maximum cutting diameter for the toolholder? Maximum cutting diameter is 110 mm when mounted with the specified shank and insert configuration for the D804TM. How deep can the cut be with this parting holder? The maximum parting depth is 17 mm for the D804TM in normal operation with recommended inserts. Is the holder left‑hand or right‑hand orientation? This toolholder is manufactured for left‑hand cutting orientation and is intended for operations that require left‑hand parting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, standardised compatibility and extended reach to maintain a steady production flow with fewer tool changes; order this parting clamp holder directly via Metav Werkzeuge or consult the team for application advice. Parting clamp holder MGM 300 L150mm by Teknik Makina — 150 mm length, right-hand cutting The Parting clamp holder MGM 300 L150mm secures MGM 300 indexable inserts for high‑precision parting and grooving on lathes, designed for right‑hand cutting applications. Secure clamp for MGM 300 indexable inserts Length 150 mm for extended reach Toolholder width 25 mm, head width 42.5 mm Right-hand cutting, max cutting diameter 200 mm Consistent parting accuracy through rigid clamping The holder is engineered for repeatable results when working with MGM 300 indexable inserts. The combination of a 150 mm shank and a 25 mm toolholder width gives a rigid foundation that minimises vibration during parting, which in turn reduces the risk of burrs and rework. The 42.5 mm cutting‑head width offers lateral stability at the insert seat, while the specified cutting height 0.754 mm ensures the insert aligns with common turning tool heights. These measurable design choices translate directly into fewer rejects and a steadier machining process. Faster changeovers and safer clamping for productive workshops Assembly and insert replacement are simplified by the standard M6x20 clamp screw and the supplied 5 Allen tightening interface, allowing for controlled, repeatable torque with common workshop tools. The holder supports a max cutting diameter 200 mm, which enables operations on larger diameters without swapping to a different setup. This focus on serviceability and robustness reduces machine downtime and increases throughput, providing a pragmatic return on tooling decisions and greater confidence in daily production. Broad compatibility and easy maintenance for mixed operations Compatibility with Korloy MGM 300 indexable inserts and the ISO 2525 designation means straightforward integration into existing tooling stocks and turret setups. The holder’s right-hand cutting orientation is clearly defined for process planning; the 3 mm cutting‑edge width and a maximum parting depth of 17 mm make the component suitable for a wide range of parting and grooving tasks. Routine maintenance requires only common hex tools, keeping lifecycle costs low and ensuring the clamp remains serviceable on the shop floor. The build reflects Teknik Makina’s focus on functional, workshop-ready tooling. For tailored advice on fitting this Teknik Makina parting clamp holder to specific machines or components, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss compatibility, delivery and technical matching. Technical data SKU: D825TM Label: Stechklemmhalter MGM 300 L150mm Manufacturer: Teknik Makina ECLASS: 21181005 Facts Overall length: 150 mm Holder width: 25 mm Holder height: 25 mm Cutting‑head width: 42.5 mm Max cutting diameter: 200 mm Cutting height: 0.754 mm Max parting depth: 17 mm Cutting width: 3 mm Screw: M6x20 Allen key size: 5 Special features Compatible with MGM 300 indexable inserts Suitable for Korloy inserts Right‑hand cutting direction ISO 2525 toolholder designation Product type: parting clamp holder Labelled: MGM 300 L150mm FAQ What inserts fit this holder? The holder accepts MGM 300 indexable inserts; it is compatible with inserts from Korloy and other manufacturers that match the MGM 300 geometry. Is this holder suitable for heavy‑duty parting? The combination of a 25 mm shank, 42.5 mm head width and a 150 mm length delivers the rigidity required for many heavy‑duty parting tasks within the specified max cutting diameter 200 mm. Which tools are needed for clamp operation and maintenance? Maintenance and insert changes use a standard 5 Allen hex key and the M6x20 clamp screw, offering straightforward, reproducible fastening. Can the holder be used for left‑hand cutting? This design is specified for right‑hand cutting; for left‑hand operations, a dedicated left‑hand holder should be selected. What is the ISO designation and why does it matter? The ISO 2525 designation indicates a standardised holder form factor, which simplifies turret programming and ensures predictable mounting across compatible machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust left‑hand parting performance combined with compact clamping dimensions for reliable, repeatable cut‑off operations. The holder’s 4 mm cutting width and 18 mm maximum plunge depth deliver precise groove control while the 25 x 25 mm clamping block ensures a stable set‑up; order directly via Metav Werkzeuge or request technical advice from our consultants. Parting tool holder D618TM — left‑hand, 4 mm cutting width by Teknik Makina A compact parting tool holder D618TM engineered for left‑hand grooving and parting operations on turning centres, offering a sturdy 25 x 25 mm clamping block and compatibility with Korloy 4C MGM indexable inserts. *Left‑hand cutting direction *4 mm cutting width for narrow grooves *Compatible with Korloy 4C MGM inserts *25 x 25 mm clamping block dimensions Consistent left‑hand parting that improves process reliability The left‑hand orientation supports machining strategies where chip flow and tool approach demand a counter‑direction setup; left‑hand cutting reduces interference on specific turning programmes and helps to maintain surface integrity during parting. The holder’s geometry is optimised for controlled cut‑off and groove creation, reducing unexpected deflection and enabling steady metal removal. This translates into fewer rejected parts and a more predictable production rhythm. Compact clamping dimensions for repeatable set‑ups With a clamping block of 25 x 25 mm and an overall length of 150 mm, the unit is designed for quick, repeatable mounting in standard tool posts. The modest mass of 0.727 kg contributes to a balanced assembly that resists vibration without imposing excessive load on the turret drive. A compact footprint speeds changeovers and simplifies fixture planning, supporting higher machine uptime and lower set‑up complexity for batch and single‑piece production alike. Clear insert compatibility and practical machining limits The holder accepts Korloy 4C MGM inserts (designation 4C MGM) and mates with shank types such as 4C‑L MGM, ensuring straightforward sourcing of cutting edges. The 4 mm cutting width is ideal for narrow groove and parting tasks, while the maximum plunge depth of 18 mm defines the safe working envelope for through‑cuts and partial grooving. Identified by ISO 2525, the clamping concept aligns with established standards for cutter seating and insert retention. Robust design that integrates with existing turning cells Manufactured to deliver stable insert clamping and repeatable positioning, the holder’s construction supports durable performance in workshop and production environments. The moderate overall length and standardised clamping face enable easy integration into CNC lathe tool turrets and quick‑change systems. Clear mechanical references and standard shank compatibility simplify toolroom logistics and reduce time spent on trial fits and adaptations. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools holders and to confirm the D618TM fits the specific turning application; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D618TM Manufacturer: Teknik Makina SKU: D618TM Facts Overall length: 150 mm Clamping height x width: 25 x 25 mm Cutting width: 4 mm Maximum plunge depth: 18 mm Weight: 0.727 kg Special features Left‑hand cutting direction ISO designation: 2525 Compatible with Korloy 4C MGM inserts Shank/reference: 4C‑L MGM FAQ What cutting direction does the holder use? The holder is designed for left‑hand cutting, enabling left‑hand parting operations with controlled chip flow. Which inserts fit this holder? This holder accepts Korloy 4C MGM indexable inserts and is specified to work with shank type 4C‑L MGM. What is the maximum plunge depth for grooving? The maximum plunge (stech) depth is 18 mm, defining the safe working limit for parting and groove operations. What are the key dimensions for turret mounting? The clamping block measures 25 x 25 mm and the overall length is 150 mm, suitable for standard tool posts. Is this holder suitable for heavy interrupted cuts? The holder’s compact design and stable clamping favour controlled parting and narrow grooving; assessment for heavy interrupted cuts should consider machine power and specific insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust T‑slot solution that pairs Ø40 mm cutting diameter with a 25 mm shank for rigid clamping and stable chip control; compatible with Taegutec SPMG 0904 inserts for straightforward inventory management. Order the S062TM T‑slot cutter directly via Metav Werkzeuge or ask the consultants for application support. T‑slot cutter S062TM — Teknik Makina — Ø40 mm, 25 mm shank The T‑slot cutter S062TM is a precision indexable cutter designed for milling accurate T‑grooves and slots in industrial machining applications, optimised for use with Taegutec insert systems. Ø40 mm cutting diameter 25 mm solid shank for rigid clamping Compatible with Taegutec SPMG 0904 inserts 3 cutting edges, 45° cutting angle Achieve repeatable T‑groove accuracy with a compact design The S062TM is engineered to deliver consistent T‑slot geometry across batch runs. Its Ø40 mm cutting diameter and 25 mm shank reduce runout and vibration when mounted in a suitably rigid holder, which translates into tighter tolerances and less rework. For machine shops seeking predictable results, the combination of three cutting edges and a balanced cutter body lowers radial forces and supports stable cutting, thereby improving surface quality and slot profile precision. Fast insert changes and standardised tooling management Indexable inserts simplify maintenance and spare-part stock. The cutter accepts SPMG 0904 inserts from Taegutec, secured by an M3.5x8.5 Torx screw tightened with a T15 key, enabling quick and reliable replacement. This standardised clamping arrangement reduces downtime during tool changes and helps central purchasing consolidate compatible inserts, supporting operational efficiency and easier tool provisioning on the shop floor. Stable cutting behaviour for consistent productivity A 45° cutting angle gives a favourable shear action that helps reduce cutting forces and improves chip formation. The three-flute geometry balances material removal with chip evacuation, which can support higher feed rates under appropriate machining conditions. With an overall length of 150 mm and a cutting length of 50 mm, the tool provides a practical combination of reach and rigidity for many milling setups while remaining compact enough for efficient handling and toolpath planning. Built for workshop integration and reliable handling Weighing approximately 0.562 kg, the cutter is easy to fit and remove during routine operations while still offering the mass required for stable cutting. Compatibility with a widely used insert type means less specialised stock and fewer logistical hurdles. For production environments that demand dependable tool performance and simple maintenance routines, the S062TM supports streamlined workflows and predictable machining cycles. For application-specific guidance and stock availability of the S062TM, contact Metav Werkzeuge for tailored advice by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: S062TM Manufacturer: Teknik Makina Facts Diameter: 40 mm Shank diameter: 25 mm Cutting length: 50 mm Overall length: 150 mm Weight: 0.562 kg Cutting angle: 45° Number of cutting edges: 3 Special features Compatible with Taegutec SPMG 0904 inserts Secured with M3.5x8.5 Torx screw Torx key size T15 Designed for indexable insert T‑slot machining FAQ Which inserts fit the cutter? The cutter accepts Taegutec SPMG 0904 indexable inserts; this standardisation simplifies spare-part management for workshops using Taegutec systems. What is the shank diameter and why it matters? The shank measures 25 mm, providing a rigid clamping interface that reduces runout and improves stability during T‑groove milling. How many cutting edges does the tool have? The tool is supplied with three cutting edges, a geometry chosen to balance chip evacuation and cutting force for controlled material removal. What fastening hardware is used for the insert? Inserts are secured with an M3.5x8.5 Torx screw, tightened using a T15 key, for secure and repeatable clamping. What are the overall length and reach of the cutter? The cutter has an overall length of 150 mm with a cutting length of 50 mm, offering practical reach while maintaining rigidity. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com