Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a compact, indexable-insert solution that combines compatibility with Sandvik inserts, a 21 mm cutting diameter and a 20 mm shank for stable clamping and fewer tool changes; order the cutter directly via Metav Werkzeuge or consult our specialists for application support. Shaft milling cutter S594-1TM – shank milling cutter for R390-11T3 indexable inserts, 21 mm diameter The Shaft milling cutter S594-1TM is a shank-mounted milling tool designed for efficient face and shoulder milling using R390-11T3 indexable inserts in industrial and CNC environments Compatible with Sandvik R390-11T3 inserts 21 mm diameter, 20 mm shank Three cutting edges for smooth material removal 90° cutting angle for square shoulder milling Reliable compatibility that reduces inventory and downtime The S594-1TM is engineered to accept R390-11T3 indexable inserts, a widespread standard from Sandvik, which enables workshops and production lines to reduce the number of specialised cutters kept in stock. By using a widely available insert system, machine shops benefit from predictable tool performance and simplified logistics. The proven insert platform also means quick on-site insert changes and repeatable cutting results, resulting in fewer machine stoppages and improved overall equipment effectiveness. Consistent material removal and surface finish with three-edge geometry The cutter’s three cutting edges and a 90° cutting angle are selected to deliver stable chip formation and reliable shoulder faces. This geometry supports controlled cutting forces and even load distribution across the inserts, which helps maintain dimensional stability and surface quality during finishing passes. With a 50 mm cutting length available, the tool covers a broad machining envelope while keeping the focus on consistent, reproducible results for common face and shoulder operations. Solid shank and secure fixing for precise CNC machining A 20 mm shank combined with a 21 mm cutting diameter provides a compact, rigid configuration that is ideal for medium-duty milling tasks on CNC machines. The cutter uses a M2.5x5.5 Torx screw and requires a T8 Torx key for insert clamping, allowing secure fixation and straightforward maintenance. The balanced design and secure clamping minimise runout and vibration, supporting longer insert life and stable process parameters in serial production or high-precision workshop applications. Practical design for workshop efficiency and reliable supply With an overall length of 150 mm and a tool weight of 0.366 kg, the cutter is easy to handle and integrates well into tool racks and presetting routines. The use of indexable inserts reduces per-part tooling cost compared with solid cutters, while compatibility with established insert formats streamlines reordering. Supplied by Teknik Cutting Tools and available through Metav Werkzeuge, the component is suited to industry and trade customers seeking a pragmatic balance of performance, maintainability and dependable supply. Acquire the S594-1TM shaft milling cutter from Teknik Cutting Tools via Metav Werkzeuge for consistent, insert-based performance — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and order coordination Technical Data Article number: S594-1TM Manufacturer: Teknik Cutting Tools Compatible inserts: R390-11T3 (Sandvik) Torx screw: M2.5x5.5 Torx key: T8 Facts Diameter: 21 mm Shank diameter: 20 mm Cutting length: 50 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.366 kg Special features Indexable-insert system for reduced tooling cost Compatible with Sandvik insert geometry Secure Torx clamping for quick insert changes Suited for face and shoulder milling in CNC applications FAQ Which inserts fit this shank milling cutter? The cutter accepts R390-11T3 indexable inserts; the S594-1TM is dimensioned for the Sandvik-compatible insert format to ensure correct seating and repeatable cutting geometry. Is the shank diameter suitable for standard toolholders? Yes, the 20 mm shank size of the S594-1TM is suitable for many standard collets and shrink-fit holders used in typical CNC milling setups. How are the inserts secured and changed? Inserts are clamped using a M2.5x5.5 Torx screw; a T8 Torx key is required for secure fastening and rapid replacement. What machining tasks is this cutter best for? The tool is optimised for face and shoulder milling where a 90° cutting angle and stable insert seating provide square shoulders and consistent surface finish. Does the cutter require special balancing for high-speed use? For high-speed applications, standard balancing checks are recommended; the compact 21 mm diameter and rigid 20 mm shank support good dynamic behaviour in typical workshop spindle speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of compatibility with Sandvik R390-1806 inserts, a 32 mm shank for improved stability and a 60 mm cutting length that supports deeper passes—ensuring steady milling performance. Order the cutter directly via Metav Werkzeuge or consult our technical team for application-specific advice. Shaft milling cutter S605TM – 32 mm shank, 60 mm cutting length (Teknik Makina) The Shaft milling cutter S605TM is an indexable-insert milling tool designed for R390-1806 inserts, delivering stable chip removal and reliable clamping for CNC milling and general production tasks. Robust 32 mm shank for stability 60 mm effective cutting length Compatible with Sandvik R390-1806 inserts Fast insert clamping with M4x11 torx screw Stable machining through proven compatibility and geometry The cutter is engineered to work with R390-1806 indexable inserts from Sandvik, which provides a secure and predictable cutting interface. The 32 mm shank increases rigidity in the toolholder, reducing deflection during heavy engagement and promoting consistent surface finish. A 90° cutting angle focuses radial forces in a way that is familiar to many milling strategies, making process planning straightforward and repeatable across batch runs. For production environments the direct compatibility with a common insert format simplifies tooling logistics and reduces changeover time. Fast insert change and low-maintenance handling Insert replacement is simplified by the standard M4x11 torx screw; the matching T15 key size is specified for correct tightening and repeatable clamping. This arrangement reduces downtime when inserts are exchanged and supports regular maintenance routines without special equipment. The cutter’s overall design—with a 60 mm cutting length and balanced profile—helps to distribute wear across the insert edges, which can extend cutting life when paired with the appropriate insert grades. Clear screw and key specifications also ease procurement and spare-part management. Designed to support efficient production and predictable throughput Equipped with three cutting edges, the tool balances material removal rate and tool life in many conventional milling strategies. The combination of a 32 mm diameter and a 150 mm total length provides a practical reach while keeping the overhang moderate for many standard setups. At a weight of 0.85 kg, the tool is easy to handle during set-up and changeover yet substantial enough to resist vibration under normal machining parameters. Choosing this milling solution helps streamline tooling inventories by aligning with a widely used insert family, supporting faster process qualification and fewer tool trials. Discuss machining requirements with Metav Werkzeuge — request geometry recommendations or a compatibility check for the Teknik Makina S605TM cutter via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S605TM Brand: Teknik Makina Compatible inserts: R390-1806 Compatible insert manufacturer: Sandvik Torx screw size: M4x11 Torx key size: T15 Weight: 0.85 kg Total length: 150 mm Core technical data Shank diameter: 32 mm Cutting length: 60 mm Diameter: 32 mm Number of cutting edges: 3 Cutting angle: 90° Special features Indexable-insert milling cutter design Suitable for R390-1806 insert format Standard torx clamping hardware specified FAQ Which inserts fit the S605TM cutter? The S605TM shaft milling cutter accepts R390-1806 indexable inserts; the tool is specified for that insert format and is compatible with Sandvik insert types. What clamping hardware is required for insert changes? Insert clamping uses an M4x11 torx screw; a T15 torx key is specified for correct tightening of the insert screws. Is the cutter suitable for CNC milling operations? Yes, the S605TM is designed as an indexable-insert milling tool for CNC milling and general production machining where R390-1806 inserts are applied. How does the 32 mm shank benefit daily production? A 32 mm shank increases rigidity in common toolholders, which reduces deflection and helps maintain repeatable surface quality during cyclic production. What information is needed to choose the right insert grade? Insert grade selection depends on the workpiece material and cutting parameters; the S605TM provides the mechanical interface (R390-1806) while the insert grade determines wear resistance and cutting performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact holder that pairs precise insert seating with a 20 mm shank and 60 mm cutting length for efficient milling; available directly via Metav Werkzeuge for fast supply and expert consultation. Shank cutter R200TM by Teknik Makina — 20 mm shank, for RDMT 1003 indexable inserts The shank cutter R200TM is designed as a reliable insert holder for light to medium milling tasks that use RDMT 1003 indexable inserts, offering a compact overall length and standard fastenings for efficient workshop handling 20 mm shank diameter for secure clamping Compatible with RDMT 1003 indexable inserts 60 mm cutting length for deeper engagement Two cutting edges for balanced cutting action Accurate seating for indexed inserts reduces setup variance The holder is engineered for repeatable insert location, meaning each tool change preserves alignment and runout within tight limits. By using the established RDMT 1003 insert form, toolrooms benefit from fast reindexing and fewer clamping adjustments. The resulting advantage is a consistent surface finish and predictable tool life, which supports tighter process control and reduced scrap rates without adding inventory complexity. Compact geometry that boosts cutting efficiency and stability With a 20 mm shank and a 60 mm cutting length, this tool body provides a favourable ratio between reach and rigidity. The combination of a compact profile and two cutting edges helps to lower vibration and improve chip evacuation compared with longer, slender holders. For manufacturers seeking predictable cycle times, this geometry means higher effective cutting depths per pass and improved tool life through reduced deflection. Standardised fastening for quick insert changes and low downtime Serviceability is simplified by the use of a M3.5 locking screw and a M3.5x8.5 Torx screw, which require a T15 Torx key for secure clamping. The standard screw sizes allow workshop technicians to swap inserts rapidly with commonly available tools, shortening machine idle time. The holder’s 150 mm overall length and modest mass make it straightforward to handle during set-up, while the measured 0.336 kg mass contributes to predictable balancing behaviour in many spindle configurations. Contact Metav Werkzeuge for tailored technical advice and to request the R200TM shank cutter for your indexable-insert milling requirements — fast supply from Emmerich and support from experienced precision specialists Technical data Article number: R200TM Manufacturer: Teknik Makina SKU: R200TM Facts Shank diameter: 20 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 20 mm Cutting edges: 2 Weight: 0.336 kg Special features Compatible with RDMT 1003 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Required Torx key size: T15 FAQ Which inserts are compatible with this holder? The R200TM shank cutter is compatible with RDMT 1003 indexable inserts, allowing use of that standard insert geometry for a wide range of finishing and light roughing tasks. How many cutting edges does the tool provide? The cutter body is designed for two cutting edges, delivering a balanced cutting action and improved stability during operation. What are the key dimensions to check before ordering? Key measures are a 20 mm shank diameter, 60 mm cutting length and 150 mm overall length; the tool weight is 0.336 kg. Which fastening parts and tool sizes are required for insert changes? Insert clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw; a T15 Torx key is required for secure tightening. Is this holder suitable for compact machine spindles? The compact profile and 20 mm shank make the R200TM well suited to setups where rigidity and a small holder envelope are required, while standard fastening sizes aid quick serviceability Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 25 mm shank, compatibility with RDMT 12T3 indexable inserts and a secure Torx clamping system, this cutter delivers dependable, serviceable performance for indexable milling operations; order directly via Metav Werkzeuge or consult the technical team for application advice. Shank milling cutter for RDMT 12T3 indexable inserts R236TM — 25 mm shank, 2 cutting edges (Teknik Makina) A shank milling cutter for RDMT 12T3 indexable inserts engineered for stable indexable milling on CNC machines and modular toolholders. 25 mm shank diameter Compatible with RDMT 12T3 inserts Two cutting edges for stable cutting Torx locking screw M3.5 with T15 key Greater process stability and reproducible results The R236TM is built around a 25 mm shank and a compact cutting geometry that prioritises rigidity and repeatability. With two cutting edges and an effective 60 mm cutting length, the design reduces chatter and supports consistent material removal rates across repeated cycles. The modest mass of 0.539 kg contributes to balanced rotation while the 150 mm overall length keeps the tool accessible for a wide range of toolholders. These characteristics translate into fewer interruptions, reliably reproducible components and a measurable uplift in throughput for batch work. Fast, secure insert changes to cut downtime A decisive advantage of this shank milling cutter is the straightforward clamping system: a M3.5 locking screw and a M3.5 x 8.5 Torx screw operated with a T15 key. The Torx interface offers positive engagement for controlled torque during insert seating, which reduces the risk of improper clamping and extends insert life. The indexable concept means only the insert requires replacement when worn, so maintenance is quick and predictable, supporting high machine utilisation and lower lifecycle costs compared with solid-tool regrinding. Efficient indexable milling for flexible production Designed specifically for RDMT 12T3 indexable inserts, the cutter supports a modular approach to milling: inserts can be chosen to match the operation, whether heavier stock removal or semi-finish passes. The compatibility with standard insert geometry makes it simple to source cutting edges with different grades and chipbreakers, enabling optimisation of cutting data without changing the tool body. The result is a versatile system that brings clarity to tool management and helps maintain cycle-time targets in mixed-production environments. Built for workshop reliability and supply continuity The component-grade design and clear specification make the tool straightforward to integrate into existing work cycles. The robust shank and proven Torx clamping reduce service requirements, while the tool’s standard dimensions facilitate inventory planning. For buyers seeking dependable supply and a transparent procurement process, Metav Werkzeuge combines a broad product range with an established logistics presence in Emmerich: consistent availability and straightforward order handling reduce the administrative burden on purchasing teams. Contact Metav Werkzeuge for tailored application advice on the 25 mm shank milling cutter R236TM and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: R236TM Manufacturer: Teknik Makina Compatible inserts: RDMT 12T3 eClass: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.539 kg Special features Locking screw: M3.5 Torx screw: M3.5 x 8.5 Torx key: T15 SKU: R236TM FAQ Which insert type does this cutter accept? The cutter accepts RDMT 12T3 indexable inserts; the R236TM is configured for that insert geometry to allow rapid index changes. What is the shank size and will it fit standard holders? Shank diameter is 25 mm; the cutter fits toolholders and collets designed for a 25 mm shank. How are the inserts secured and which tool is required? Inserts are secured with a M3.5 x 8.5 Torx screw; a T15 Torx key is used to tighten or release the screw on the R236TM. How long is the cutting length and overall tool length? The cutting length is 60 mm and the overall length is 150 mm, offering a balance between reach and rigidity for typical milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid, indexable-insert solution that combines a 40 mm cutting diameter, a 32 mm shank and three cutting edges for stable metal removal; the tool delivers consistent performance with a 60 mm cutting length and is compatible with VCGT 1604 inserts. Order via Metav Werkzeuge or contact their consultants for application advice. Shank cutter S714TM — 40 mm diameter, for VCGT 1604 indexable inserts (Teknik Makina) The Shank cutter S714TM is an indexable-insert milling head engineered for facing and shoulder milling in industrial CNC applications where repeatable results and secure clamping are required. 40 mm cutting diameter Compatible with VCGT 1604 inserts Three cutting edges for stable removal 32 mm shank for high rigidity Consistent metal removal with fewer passes The design focuses on cycle-time reduction through stable cutting geometry and a three-edge configuration that spreads cutting forces evenly across the insert set. Reduced vibration and a robust body diameter enable higher metal removal rates without compromising surface finish; this is particularly beneficial when machining shoulders and faces where dimensional stability matters. The combination of a 40 mm diameter and a 60 mm cutting length provides an extended effective cutting area while maintaining rigidity for repeatable results. Secure clamping and easy insert replacement A practical clamping solution using a torx screw M4x10 and the supplied T15 key ensures secure retention of the VCGT inserts and fast index changes. The shank geometry with a 32 mm diameter minimises runout and increases tool life by improving stability in the holder. For workshops integrating indexable tooling, the concept simplifies maintenance and reduces downtime because inserts can be rotated or replaced quickly without full tool changeover. Practical integration in CNC setups The cutter is intended for professional cutting-tool contexts and pairs with standard indexable-insert holders and toolholders compatible with the stated shank size. The relatively low mass of 0.951 kg and an overall length of 150 mm support versatile machine allocation while preserving balance at machining speeds. Clear technical match to VCGT 1604 inserts streamlines procurement and tooling strategies for production lines that favour indexable solutions over solid-carbide alternatives. Contact Metav Werkzeuge for tailored application guidance on the S714TM shank cutter and secure reliable supply from Emmerich, including compatibility checks and delivery details Technical data Article number: S714TM Manufacturer: Teknik Makina Compatible inserts: VCGT 1604 Cutting diameter: 40 mm Shank diameter: 32 mm Cutting length: 60 mm Number of cutting edges: 3 Overall length: 150 mm Weight: 0.951 kg Torx screw: M4x10 Torx key: T15 Facts SKU: S714TM Suitable insert type: VCGT 1604 Diameter (D): 40 mm Shank (d): 32 mm Cutting length (l): 60 mm Total length (L): 150 mm Weight: 0.951 kg Design & features Indexable-insert milling head Three cutting edges for balanced cutting forces Torx clamping for fast insert changes Robust body for reduced vibration Suitable for facing and shoulder milling FAQ What inserts fit this cutter? The cutter is designed for VCGT 1604 indexable inserts; compatibility is specified for this insert size and format. Which shank size is required in the toolholder? A toolholder accepting a 32 mm shank is required to ensure correct clamping and minimum runout with this cutter. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges, which balances cutting forces and helps to reduce vibration for smoother machining and longer insert life. Is the clamping hardware included and what is the screw type? The cutter uses a torx screw M4x10 and a T15 key for insert clamping, enabling quick and secure insert changes. For which machining tasks is this cutter best suited? It is intended for facing and shoulder milling in CNC setups where indexable inserts and repeatable geometry are preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of adaptability, toolholder stability and straightforward insert changes for consistent milling performance; order directly via Metav Werkzeuge or consult the team for application-specific advice. Shank milling cutter S319TM – 30 mm cutting diameter, for ADKT 1505 indexable inserts (Teknik Makina) A Shank milling cutter S319TM engineered as an indexable milling solution for face and peripheral operations with ADKT 1505 inserts, suited to workshop and industrial production settings 30 mm cutting diameter for versatile milling Compatible with ADKT 1505 indexable inserts 25 mm shank for secure toolholding M4x10 Torx screw with T15 key for fast changes Stable clamping and consistent chip control for high-precision runs The S319TM is configured around a 25 mm shank and a 30 mm cutting diameter, providing a balance between rigidity and accessibility. This shank diameter supports secure clamping in standard holders, which reduces runout and vibration during milling. The combination of a longer reach and a solid tool connection leads to improved surface finish and predictable tool life, especially when paired with ADKT 1505 indexable inserts from established suppliers such as ISCAR. The result is fewer process interruptions and a steady production rhythm. Designed for fast insert replacement and low downtime Insert changes are secured by an M4x10 Torx screw tightened with a T15 key, enabling quick, repeatable replacement without specialised tools. The tool’s three cutting edges layout allows for stable engagement and even load distribution across the insert seats, which supports efficient cutting and simplified maintenance cycles. Clear mechanical interfaces translate into shorter setup times and easier stock management of replacement inserts, enhancing overall operational efficiency. Reach and cutting length tailored for practical workshop tasks With a 200 mm overall length and a 50 mm cutting length, this cutter provides the reach necessary for stepped or deep-surface milling while keeping effective cutting engagement. The specified geometry supports both face and peripheral cutting strategies, allowing operators to select the most economical approach for a given component. The tool’s mass — approximately 0.783 kg — contributes to dampening minor vibrations, aiding dimensional stability on medium-duty milling centres. Integration into production and procurement workflows As a dedicated indexable milling solution, the cutter fits into existing tool sets that rely on ADKT 1505 inserts and Torx fastenings, simplifying procurement and spares handling. Compatibility with widely available insert grades allows adjustments for finish, speed or workpiece material without changing the tool shank. For purchasers and workshop planners the emphasis is on predictable performance, straightforward servicing and interoperability with common insert lines, offering measurable gains in uptime and cost-efficiency. Secure application advice and order handling through Metav Werkzeuge — contact the specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored tooling recommendations and availability Technical data Article number: S319TM Manufacturer: Teknik Makina Product name: Shank milling cutter for ADKT 1505 indexable inserts Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Core facts Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 50 mm Overall length: 200 mm Number of cutting edges: 3 Weight: 0.783 kg Fastening screw: M4x10 Torx key size: T15 Special features Indexable insert design Rapid insert replacement with Torx screw Suited for face and peripheral milling Standardised interfaces for easy integration FAQ What insert type fits this cutter? The cutter accepts ADKT 1505 indexable inserts; compatible insert grades from manufacturers such as ISCAR can be used depending on the application. Which screw and key are required for insert clamping? Insert clamping is secured with an M4x10 Torx screw, tightened using a T15 key. What are the key dimensions for toolholder selection? Key dimensions are a 25 mm shank and 200 mm overall length, with a 30 mm cutting diameter for holder compatibility checks. How many cutting edges does the tool have? The tool is specified with three cutting edges, designed to balance chip evacuation and cutting stability. Is this cutter suitable for deep-reach milling? The 50 mm cutting length combined with a 200 mm overall length gives sufficient reach for many stepped and recessed milling tasks while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of compatibility with APXT 1003 indexable inserts, an 18 mm cutting diameter and a 16 mm shank for secure mounting; order the shank cutter directly via Metav Werkzeuge or consult the in-house advisors for application support. Shank milling cutter S174TM by Teknik Makina — 18 mm diameter, for APXT 1003 indexable inserts The Shank milling cutter S174TM is a purpose-built shank milling tool for light-to-medium indexable-insert milling tasks, designed to accept APXT 1003-style inserts and deliver repeatable, secure cutting performance in industrial workshop settings. Compatible with APXT 1003 indexable inserts 18 mm cutting diameter, 2 cutting edges 16 mm shank diameter, 50 mm cutting length Torx screw M2.5×5.5, T8 key size Accuracy and predictable process results for indexable-insert milling The S174TM is configured to work with APXT 1003 indexable inserts, providing a reliable tool body that promotes consistent chip formation and repeatable dimensional output. The tool’s 18 mm diameter and 2 cutting edges reduce vibration and simplify chip control in interrupted or light-contour milling operations. For procurement and process planners, this combination translates into fewer tool changes and a predictable cut cycle time, which supports tighter scheduling and a more efficient production flow. Secure holding and simple set-up reduce downtime A 16 mm shank diameter ensures stable clamping in standard toolholders, minimising runout and heat-related deviation during short-run milling. The 50 mm cutting length offers sufficient engagement for shoulder and slot work without compromising rigidity. Fast, unambiguous fastening is provided via the Torx screw M2.5×5.5 (T8 key size), allowing quick insert replacement and torque that maintains clamping security under typical feed rates. Reduced set-up complexity leads to shorter machine idle times and higher overall equipment effectiveness. Compatibility and workshop integration for flexible machining Designed with compatibility in mind, the cutter accepts APXT 1003 inserts from recognised manufacturers such as Korloy, enabling easy inventory alignment with existing insert families. The 90° cutting angle suits face and peripheral milling tasks where square shoulders and defined contour transitions are required. As a tooling specialist component from Teknik Makina, the shank milling tool is a straightforward option for workshops aiming to consolidate tooling types while retaining process reliability and ease of maintenance. Practical considerations for specification and procurement Specification data such as 18 mm cutting diameter, 16 mm shank, 50 mm cutting length and the required Torx screw M2.5×5.5 (T8) are provided to support fixture planning and procurement decisions. The tool’s compact overall length of 150 mm and a recorded mass of 0.246 kg make it easy to handle in tool rooms and to include in set-ups for CNC machining centres. Where tool selection must balance rigidity with flexibility, this cutter offers a pragmatic compromise for many general milling applications using indexable inserts. For application advice, stock availability or to arrange supply of the S174TM shank milling cutter from Teknik Makina, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav provides dependable European stock and technical support Technical Data Article number: S174TM Manufacturer: Teknik Makina Compatible inserts: APXT 1003 Insert manufacturer fit: Korloy Weight: 0.246 kg Core Data Cutting diameter: 18 mm Shank diameter: 16 mm Cutting length: 50 mm Overall length: 150 mm Cutting edges: 2 Cutting angle: 90° Special features Torx screw M2.5×5.5 T8 key size eClass: 21180806 ETIM: EC011860 FAQ Which indexable inserts fit this shank cutter? The shank cutter is designed for APXT 1003 indexable inserts and is compatible with inserts from Korloy that follow this designation. What are the key dimensions to check for toolholder compatibility? Check the 16 mm shank diameter and the overall length of 150 mm when planning for holder clamping and tool projection. How many cutting edges does the cutter have and what does that mean for machining? This cutter has 2 cutting edges, which typically improves stability and chip evacuation for shoulder and slot milling compared with higher-edge-count tools in similar diameters. What fastening hardware is required for the inserts? Insert clamping uses a Torx screw M2.5×5.5; the corresponding key size is T8 for correct torque application. Is the cutting angle suitable for square-shoulder milling? Yes; the tool features a 90° cutting angle, making it appropriate for square-shoulder and face milling where defined edges are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust solution that combines precision, stable clamping and simple maintenance for dependable internal machining. The SIR S16M design with a 16 mm shank and compatibility with IR16 indexable inserts reduces setup time and improves repeatability; order via Metav Werkzeuge or consult their specialists for application support. Boring bar SIR S16M by Teknik Makina — compact design, IR16 compatibility the Boring bar SIR for IR indexable inserts is a right-hand tool designed for internal turning with 16 IR inserts, offering a compact 150 mm length for confined setups SIR S16M for 16 IR indexable inserts 16 mm shank for secure clamping 150 mm overall length for compact set-ups Right-hand cutting for standard lathe operations Consistent accuracy through rigid shank and insert compatibility The bar is engineered to provide consistent accuracy in internal machining by combining a 16 mm shank with the SIR mounting geometry. Compatibility with IR16 indexable inserts means that insert seating and repeatability are optimised, which directly improves concentricity and reduces scrap rates. The construction emphasises stability under load so that cycle times remain predictable and tool life is extended. For production environments where repeatability matters, this configuration supports predictable tolerances and smoother process control. Fast, secure insert changes and low-maintenance operation Maintenance and tool changes are simplified by a practical fastening concept: a Torx T15 interface and an M3.5x8.5 fixing screw ensure secure retention while allowing quick replacement of inserts. The cutting height 32 mm provides the correct seat geometry for IR inserts, minimising the need for shimming or complicated adjustments. The compact 150 mm overall length reduces overhang, lowering vibration potential and improving surface finish. These features combine to reduce downtime and make routine servicing straightforward without requiring specialised equipment. Practical workshop benefits and typical applications Designed primarily for internal turning applications on conventional lathes and CNC turning centres, the bar is suitable where a right-hand cutting direction is standard. The tool supports operations such as boring, internal profiling and light face-turning using indexable carbide inserts. Its modest mass and reduced overhang support higher feeds than longer, more flexible assemblies, delivering improved material removal rates and consistent surface quality. For tailored tool selection or machining strategies, Metav’s technical advisers can provide guidance to match the bar’s geometry to the specific insert grade and substrate. For procurement or technical specification requests concerning the Teknik Makina SIR S16M (K337-6TM), contact Metav Werkzeuge for customised advice and ordering support Technical data Article number: K337-6TM Manufacturer: Teknik Makina Designation ISO: SIR S16M For indexable inserts: 16 IR ECLASS: 21180806 Core specifications Shank diameter: 16 mm Overall length: 150 mm Cutting height: 32 mm Diameter: 16 mm Weight: 0.221 kg Cutting direction: right Materials & features Torx key: T15 Torx screw: M3.5x8.5 Clamp holder designation: IR16 SIR mounting for IR inserts Compact design for reduced overhang FAQ Which insert size fits this boring bar? The bar is designed for IR16 indexable inserts; use inserts specified for IR16 seating to ensure correct fitment. What is the shank diameter and why does it matter? The shank diameter is 16 mm, providing a rigid connection to the toolholder and reducing deflection during internal turning. Is the cutting direction suitable for standard lathes? Yes — the tool has a right-hand cutting direction, compatible with standard right-hand internal turning operations. What fasteners are required for insert clamping? Insert retention uses a Torx T15 interface with an M3.5x8.5 fixing screw as supplied or specified for IR16 inserts. Can this bar be used in compact or confined setups? The 150 mm overall length and compact SIR design make it suitable for constrained workspaces where reduced overhang is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable indexable-insert compatibility, a Ø 23 mm cutting diameter and a robust 25 mm shank for stable, repeatable holemaking. Order or request application advice from Metav Werkzeuge if needed. Teknik Makina indexable insert drill U823TM — Ø 23 mm, compatible with SPMG 07T3 inserts Teknik Makina indexable insert drill U823TM designed for medium-depth production drilling where quick insert changes and predictable process behaviour are required Compatible with SPMG 07T3 inserts for fast regrind cycles and low downtime Ø 23 mm cutting diameter for general production tasks 25 mm shank with 56 mm clamping length for rigid mounting Cutting length 69 mm and overall length 150 mm for medium-depth holes Predictable holemaking through an indexable insert system The U823TM is delivered as an indexable insert drill system that accepts SPMG 07T3 cutting inserts, enabling quick edge changes and consistent cutting geometry across batches. Compatibility with established insert suppliers Taegutec and YG-1 reduces procurement risk and simplifies tool inventory. By using indexed inserts rather than solid tools, machining cycles benefit from reproducible cutting edges and straightforward maintenance: worn inserts are replaced instead of regrinding an entire tool, which shortens machine downtime and lowers long-term operating costs. This approach supports a stable, measurable production output and helps maintain repeatable hole tolerances in series manufacture. Rigid shank and accurate clamping for reduced runout A substantial 25 mm shank with a 56 mm clamping length provides the stiffness required for stable drilling at the stated diameter, reducing deflection and improving hole quality. The tool’s mass of 0.407 kg contributes to vibration damping in many toolholder setups, while the defined clamping length helps ensure consistent insertion depth and concentricity. These mechanical attributes translate into more reliable process data and fewer scrapped parts when the holder and machine spindle are correctly matched. For users assessing fixture choices, the clear shank specification allows straightforward selection of collets or chucks that meet the rigidity demands of regular production. Efficient geometry for medium-depth drilling operations With a cutting length of 69 mm and an overall length of 150 mm, the drill is optimised for medium-depth holes where chip control, access and stability must be balanced. The 23 mm cutting diameter supports a wide range of common production tasks, offering an efficient compromise between material removal rate and tool life when inserts are maintained and replaced on schedule. The replaceable-edge concept provides consistent edge geometry across inserts, which simplifies process tuning: once feed and speed are set for the insert geometry, repeat runs produce comparable results without lengthy requalification. Practical suitability and procurement confidence This indexable insert cutter is suited to workshops and production lines that favour fast serviceability and predictable cycle times. Compatibility with major insert brands reduces lead times for spare cutting edges and supports uninterrupted shifts. Metav’s role as a precision partner and distributor gives additional assurance: the company maintains a broad product range and established logistics for European customers, which helps to keep tool availability reliable and procurement straightforward. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Teknik Makina U823TM; reach the Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: U823TM Manufacturer: Teknik Makina Facts Diameter: 23 mm Overall length: 150 mm Cutting length: 69 mm Shank diameter: 25 mm Shank clamping length: 56 mm Weight: 0.407 kg Special features Compatible with inserts from Taegutec and YG-1 Insert type: SPMG 07T3 Indexable insert drill design FAQ What insert type does this drill use? The Teknik Makina indexable insert drill U823TM uses SPMG 07T3 inserts and is compatible with inserts from Taegutec and YG-1. What are the key dimensions for mounting? Diameter 23 mm, shank 25 mm, clamping length 56 mm, cutting length 69 mm, overall length 150 mm. Is the tool suitable for deep-hole drilling? This tool is designed for medium-depth holes given the 69 mm cutting length; for deeper through-tool or deep-hole applications, alternative tool concepts should be considered. Can replacement inserts be sourced from other brands? Replacement inserts are readily available from compatible manufacturers such as Taegutec and YG-1; compatibility with other brands is not specified. What is the SKU for ordering and documentation? The article is listed under SKU U823TM and sold as an indexable insert drill by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a coolant-fed design and compact 17 mm diameter to maintain cycle time and surface quality. The combination of a 16 mm shank, 22 mm cutting length and robust two-edge configuration delivers stable, repeatable milling with 4NKT 06 indexable inserts. Order via Metav Werkzeuge or consult the team for application advice. Milling cutter body – 17 mm diameter with internal coolant (Teknik Makina) Milling cutter body for use with 4NKT 06 indexable inserts, engineered for coolant-fed CNC milling tasks where secure clamping and efficient chip evacuation are required 17 mm cutting diameter with 16 mm shank Internal coolant supply for secure chip evacuation Compatible with 4NKT 06 indexable inserts (Taegutec) Torx T8 screw fit, M3 x 6.2 fastening Higher throughput through coolant-fed cutting The coolant-fed design ensures concentrated coolant delivery at the cutting zone, reducing thermal load and improving tool life. With a 17 mm diameter and 22 mm cutting length, the tool body enables stable engagement and consistent chip control when used with 4NKT 06 inserts. The result is reduced rework, fewer interruptions and a measurable improvement in machining throughput, making the cutter an efficient choice for repetitive or batch milling tasks. Secure clamping and straightforward maintenance A 16 mm shank provides compatibility with standard collet systems while the Torx system simplifies insert clamping and replacement. The screw specification M3 x 6.2 combined with a T8 Torx key secures the cutting head reliably and allows rapid changeovers. These features reduce downtime during tool swaps and support predictable setup times on production lines. Consistent surface finish and tool life With two cutting edges configured for balanced cutting, the cutter body reduces vibration and improves surface finish on each pass. The 150 mm overall length balances reach and rigidity for many common milling set-ups, while internal coolant assists in flushing chips away from the cutting zone. This combination supports longer insert life and steadier part quality over extended runs. Practical application guidance for workshop use The cutter is intended for operations using 4NKT 06 indexable inserts and is supplied by Teknik Makina as a purpose-built tool body. It is especially suitable where coolant supply is available at the spindle. Ensure correct torque when fitting the Torx screw and confirm collet runout for optimum performance. The tool’s compact geometry and internal coolant make it well suited to short-to-medium depth milling in production and job-shop environments. Opt for Teknik Cutting Tools’ coolant-ready cutter body for reliable, repeatable milling — contact Metav Werkzeuge for detailed application support or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S472-1TM Product: Milling cutter body For inserts: 4NKT 06 Compatible insert manufacturer: Taegutec Manufacturer: Teknik Makina Weight: 0.241 kg Dimensions & core data Cutting diameter: 17 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 22 mm Cutting edges: 2 Torx key: T8 Torx screw: M3 x 6.2 mm Features Internal coolant Suitable for 4NKT 06 indexable inserts SKU: S472-1TM FAQ Which inserts fit this cutter body? The cutter body is designed for 4NKT 06 indexable inserts and is compatible with Taegutec insert types specified for that geometry. Is the tool coolant-fed and how does that benefit machining? Yes, the internal coolant channel provides direct coolant to the cutting zone; this reduces heat, aids chip evacuation and prolongs insert life in the TekniK Makina milling cutter body. What are the important mounting details? Use a 16 mm collet for the shank and secure inserts with the M3 x 6.2 screw using a T8 Torx key; correct clamping torque ensures repeatable performance. What lengths and diameters are available on this model? This model features a 17 mm cutting diameter, 22 mm cutting length and 150 mm overall length as standard for the S472-1TM SKU. How many cutting edges does the tool have and why does that matter? The cutter body uses two cutting edges, which help balance cutting forces and improve surface finish while maintaining efficient metal removal rates. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of Ø25 mm cutting diameter, a 20 mm shank and quick, secure insert fixing for dependable milling throughput; order the tool directly via Metav Werkzeuge or contact our consultants for specification support. Shank cutter S483TM — Indexable insert shank cutter for BLMP 0603, Teknik Makina A shank cutter S483TM engineered for milling operations using BLMP 0603 indexable inserts, suitable for integration into standard 20 mm tool holders. Designed for BLMP 0603 indexable inserts Ø25 mm cutting diameter for compact milling 4 cutting edges for stable material removal 20 mm shank for secure clamping High productivity with indexable inserts and compact diameter The S483TM is built around an indexable insert system that accelerates tool change and reduces downtime. With a Ø25 mm cutting diameter and 4 cutting edges, the cutter offers a compact footprint while maintaining surface quality and consistent chip control. The use of BLMP 0603 inserts allows for economical index changes without full-tool replacement, which translates into higher machine uptime and lower tooling costs per part. This configuration is particularly effective where repeatability and short intervention times are priorities. Secure clamping and rapid insert replacement A robust 20 mm shank ensures reliable clamping in standard collet or chuck systems, while the overall length of 150 mm provides sufficient reach for a variety of set-ups. Insert retention is accomplished with an M3x6.5 screw and a T8 Torx key, enabling quick, repeatable insert changes and consistent seat contact. The straightforward screw-based fixation minimises setup complexity and reduces the risk of insert movement during interrupted cuts, supporting higher process stability. Designed for workshop efficiency and manageable handling Weighing only 0.28 kg, the cutter is light to handle during tool preparation and storage yet solid enough for robust milling demands. Produced by Teknik Makina, the tool benefits from a focused design for indexable systems, balancing stiffness and accessibility. The combination of a compact diameter, dedicated insert type and standardised shank dimension offers straightforward inventory management and rapid deployment across multiple machines in a workshop environment. Compatibility and application overview The cutter is supplied for use with BLMP 0603 inserts and is compatible with Taegutec indexable inserts as specified. Its four-edge layout supports consistent cutting performance in repetitive operations where insert indexing and part-to-part consistency matter. The tool is an efficient choice for production environments seeking economical insert use, simplified maintenance and predictable machining cycles. For procurement of Teknik Makina’s shank cutter S483TM and tailored advice from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific applications Technical data Article number: S483TM Manufacturer: Teknik Makina Designation: Shank cutter for BLMP 0603 indexable inserts Compatible inserts: BLMP 0603 (Taegutec compatibility) Fixing screw: M3x6.5 Torx key: T8 Weight: 0.28 kg Facts Cutting diameter: 25 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 4 Special features Indexable insert system Quick insert change with Torx screw fixing Compact diameter for tight set-ups Suitable for standard 20 mm holders FAQ Which inserts fit this shank cutter? The cutter is designed for BLMP 0603 indexable inserts and is compatible with Taegutec BLMP 0603 inserts for straightforward replacement. What are the key dimensions for tooling and set-up? Key dimensions include a 25 mm cutting diameter, 20 mm shank diameter and 150 mm overall length for machine and holder compatibility. How are the inserts secured? Inserts are fastened with an M3x6.5 screw using a T8 Torx key to ensure repeatable seating and secure clamping during machining. Is the cutter suitable for compact workspaces? Yes — the compact Ø25 mm diameter and modest overall length make the cutter well suited to confined set-ups while maintaining four cutting edges for steady material removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines stable clamping, efficient insert changes and a long cutting reach for consistent cycle times. The 16 mm shaft and 60 mm effective cutting length deliver controlled machining performance; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Shank cutter R144TM — for RDMW 0702 indexable inserts, 16 mm shaft (Teknik Makina) A Shank cutter R144TM designed to hold RDMW 0702 indexable inserts securely for versatile milling tasks in production and jobbing environments 16 mm shaft diameter 60 mm cutting length Compatible with RDMW 0702 indexable inserts Torx M2.5×5.5 screw, T8 key required Stable clamping increases machining consistency A solid 16 mm shaft and compact construction minimise runout and vibration, which directly improves precision and surface finish in milling operations. The toolholder design focuses on mechanical rigidity, so the mounted insert maintains its cutting geometry during each pass. This leads to fewer rework cycles and more predictable process behaviour, providing a measurable benefit for repetitive production runs. Rapid insert changes and broad compatibility Compatibility with RDMW 0702 indexable inserts and the widespread Taegutec insert form factor reduces tooling complexity on the shop floor. Insert retention uses a Torx M2.5×5.5 screw and a T8 key, enabling secure clamping and quick, repeatable changeovers that cut downtime. The result is a practical balance between setup speed and clamping reliability, supporting higher machine utilisation and easier inventory management. Extended reach and efficient material removal With a 60 mm cutting length and a 150 mm overall length, the cutter offers reach for deeper pockets and extended operations while preserving stiffness where it matters. The two cutting edges deliver a straightforward cutting geometry that supports stable metal removal rates and contributes to a low cost per cut through predictable tool life. At only 0.23 kg, the assembly is light enough for practical handling during tool changes yet robust enough for routine production. Application fit and operational guidance This shank-mounted milling solution is suited to workshops and industrial users who rely on indexable-insert systems for repeatable milling tasks. The combination of secure insert clamping, defined cutting length and a compact shaft diameter targets applications where a reliable, easy-to-service cutter is required. For specification checks or machining parameter recommendations, Metav’s technical advisers can provide context-sensitive guidance to ensure the cutter integrates smoothly into existing tool setups. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina shank cutter R144TM, including recommended inserts and clamping procedures — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: R144TM Manufacturer: Teknik Makina Product: Shank cutter for RDMW 0702 indexable inserts Core measurements Shaft diameter: 16 mm Diameter: 16 mm Cutting length (shaft): 60 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.23 kg Special features For RDMW 0702 indexable inserts Compatible insert maker: Taegutec Torx screw M2.5×5.5 Torx key size: T8 UID / SKU: R144TM FAQ Which inserts fit this shank cutter? The cutter accepts RDMW 0702 indexable inserts; compatibility with Taegutec inserts is indicated for straightforward procurement. How is the insert secured to the tool? Inserts are fastened with a Torx M2.5×5.5 screw tightened using a T8 key to ensure consistent clamping force. What shaft diameter and reach does the tool provide? The tool has a 16 mm shaft diameter and a 60 mm effective cutting length, with a total length of 150 mm for extended reach. How many cutting edges does the cutter have? The tool is configured with 2 cutting edges to offer simple geometry and steady chip removal. Is the tool suitable for automated tool-change systems? The compact shaft and standard clamping interface support efficient manual and automated handling; check specification and system compatibility before integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the tool’s combination of a 32 mm shank for rigid clamping, three cutting edges for consistent chip control and fast insert changes to reduce downtime — order the cutter directly via Metav Werkzeuge or consult our advisors for application optimisation. Shaft milling cutter S830TM — 32 mm shank, for SPMG 0502–0904 indexable inserts (Teknik Makina) The Shaft milling cutter S830TM is a shank-mounted milling tool designed for use with SPMG 0502–0904 indexable inserts, suited to general machining tasks where repeatability and quick insert changes are required 32 mm shank diameter for stable clamping Suitable for SPMG 0904 indexable inserts Three cutting edges for smooth material removal Includes M3.5×8.5 Torx screw; T15 key Rigidity and dimensional control for repeatable parts With a 32 mm shank and a total length of 150 mm, the tool provides a stable interface between spindle and cutting zone, which is crucial for achieving repeatable tolerances in batch production. The configuration of three cutting edges evens out cutting forces, reducing vibration and promoting a consistent surface finish. At a mass of 0.908 kg, the assembly offers a balance between stiffness and manageable rotating mass, helping to limit runout and improve tool life on medium-duty milling operations. Faster changeovers and flexible cutting strategies The S830TM accommodates SPMG 0502–0904 indexable inserts and is compatible with Taegutec plates, allowing rapid plate indexing or replacement without removing the tool from the spindle. Retention uses an M3.5×8.5 Torx screw in conjunction with a T15 key, ensuring secure clamping of inserts and straightforward maintenance. For workshops seeking lower per-part tooling costs, the indexable system enables targeted use of abrasive-resistant grades for roughing and tougher edge geometries for finishing, reducing overall tooling spend while maintaining cycle times. Shop-floor impact: throughput and process reliability Designed for pragmatic production use, the cutter’s geometry and a 40 mm effective cutting length allow reliable material removal while keeping the tool accessible for inspection and replacement. The combination of defined shank diameter and insert-based cutting means less inventory complexity compared with full-body cutters; spare inserts are compact and economical to store. This arrangement supports predictable process windows and contributes to measurable throughput gains where short changeover routines and stable machining conditions are priorities. For tailored advice on integrating the Teknik Makina S830TM into existing toolholders or production lines, contact Metav Werkzeuge in Emmerich — our consultants provide specification support and rapid supply from stock Technical data SKU: S830TM Manufacturer: Teknik Makina Product: Shaft milling cutter for SPMG 0502–0904 indexable inserts Article description: Schaftfräser for SPMG 0502-0904 Indexable Inserts Numbers / core technical data Shank diameter: 32 mm Number of cutting edges: 3 Effective cutting length: 40 mm Overall length: 150 mm Weight: 0.908 kg Special features / compatibility Compatible inserts: SPMG 0502–0904 Compatible insert manufacturer: Taegutec Torx screw: M3.5×8.5 Torx key size: T15 FAQ Which indexable inserts fit this tool? The cutter accepts SPMG 0502–0904 indexable inserts; the S830TM is specified for these insert sizes and is compatible with Taegutec plates. How many cutting edges does the tool have and what is the benefit? The S830TM features three cutting edges; this layout evens out cutting forces, reduces vibration and supports a consistent surface finish in cyclic production. What is the shank diameter and overall length? The tool has a 32 mm shank diameter and an overall length of 150 mm as listed for the S830TM. Which fasteners are specified for insert retention? Retention uses an M3.5×8.5 Torx screw and requires a T15 key for secure clamping of the inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of proven rigidity, deep‑hole capability and simple insert replacement to keep machining cycles steady and predictable; order the tool directly via Metav Werkzeuge or consult the sales team for application advice. Indexable insert drill U410TM by Teknik Makina — 18 mm, 72 mm cutting length The Indexable insert drill U410TM is engineered for production drilling where repeatability and fast insert changes are essential, suitable for medium‑depth holemaking in a range of machining centres. *Indexable design for SOMT 0602 inserts *25 mm shank for rigid machine mounting *72 mm cutting length for deeper holes *Compatible with Taegutec inserts High‑precision holemaking that stabilises cycle times The U410TM is designed to deliver consistent bore geometry by combining a defined 18 mm diameter with a 72 mm cutting length, which permits deeper holemaking without sacrificing stability. The indexable concept reduces variability between tool changes because the cutting edge is replaced precisely rather than regrinded; this reduces set‑up variation and contributes to a reproducible process. Where shopfloor efficiency matters, the geometry and insert seating are critical for maintaining runout and minimising rework — the tool’s engineered interface for SOMT 0602 inserts supports that demand. Robust shank and length proportions for secure clamping A 25 mm shank with a 56 mm shank length gives the tool a low tendency to deflect under radial cutting forces, increasing the probability of first‑pass quality in serial production. The 150 mm overall length paired with the shank proportions balances accessibility and rigidity, making the holder‑to‑tool transition predictable during heavy interrupted cuts. The mass of 0.347 kg keeps inertial load modest while remaining substantial enough for smooth chip evacuation and vibration damping, which supports steady surface finish and bore roundness over extended runs. Insert system that speeds service intervals and reduces costs The insert‑based concept, compatible with Taegutec‑type plates and the SOMT 0602 geometry, shortens maintenance time: worn inserts are swapped in seconds and insert stock is compact. This reduces downtime compared with regrinding solid tools and lowers lifetime tooling expenditure when multiple inserts are stocked. The modular approach also allows quick adaptation of cutting grades and coatings as required by different workpiece alloys or cutting conditions, making the drill a flexible element in a cost‑conscious production strategy. For specification queries or to confirm compatibility with a spindle and holder, consult the technical team at Metav Werkzeuge (details below). For procurement and technical matching of Teknik Makina indexable drilling solutions, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U410TM Manufacturer: Teknik Makina Product type: Indexable insert drill Compatible insert: SOMT 0602 Compatible insert manufacturer: Taegutec Core dimensions Diameter: 18 mm Overall length: 150 mm Cutting length: 72 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.347 kg Special features Indexable insert system Rapid insert replacement Designed for rigid clamping and production use FAQ What insert type fits this drill? The drill accepts SOMT 0602 indexable inserts; the toolbody is machined to locate and clamp these plates accurately. Is the U410TM compatible with Taegutec inserts? Yes — the U410TM is specified for use with Taegutec‑type inserts, enabling straightforward sourcing of cutting grades. What are the key dimensions to check before ordering? Verify the 18 mm diameter, 150 mm overall length and 25 mm shank diameter to ensure compatibility with the machine holder and required hole depth. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact indexable drill body that combines reliable insert compatibility and straightforward machine clamping to keep production steady; the tool’s 17 mm diameter and compatibility with SOMT 0602 inserts deliver repeatable holemaking while minimising tooling costs. Order directly via Metav Werkzeuge or consult the team for application advice. Indexable drill U408TM – 17 mm diameter, for SOMT 0602 inserts (Teknik Makina) The Indexable drill U408TM is an indexable drill body engineered for precision holemaking in CNC machining operations, designed to accept SOMT 0602 indexable inserts and to provide consistent results across repeat production runs. 17 mm diameter for standard hole sizes Compatible with SOMT 0602 indexable inserts 25 mm shank for secure machine clamping 68 mm cutting length, 146 mm overall length Consistent holes through indexable-insert technology Indexable-insert drilling offers a clear economic advantage for medium- to high-volume production: the cutting edge is replaced, not the whole tool. The tool body is built for SOMT 0602 inserts, allowing predictable tool life and fast edge changes. With a nominal 17 mm diameter the system suits common holemaking tasks while the replaceable inserts deliver repeatable geometry and simplified inventory management, reducing per-hole cost compared with solid-tool alternatives. Secure clamping and reduced setup time A robust 25 mm shank and a 56 mm clamping length provide stable seating in standard tool holders and reduce the risk of runout. Stable clamping translates directly into better surface finish and longer insert life. The comparatively lightweight body (approx. 0.338 kg) eases handling during tool changes; the result is quicker set-up cycles on the machine and less unproductive time between batches. Geometry and dimensions that support deeper operations The tool’s 68 mm cutting length combined with a 146 mm overall length means the body can reach moderate depths while remaining compact enough for rigid setups. Cutting length defines the maximum effective engagement of the indexable insert; selecting an appropriate insert grade and setting the correct feed and speed will maintain cutting performance throughout the intended penetration depth. These dimensions make the drill body suitable for stacked part production where predictable axial reach is essential. Practical advantages in the workshop The compatibility with Taegutec-style inserts provides access to a wide choice of grades for different cutting conditions and materials. As an indexable drill body, the U408TM helps to lower tooling logistics by standardising on a single insert type (SOMT 0602) across several drill diameters where possible, facilitating tool change routines and cutting-parameter optimisation. The result is improved process reliability and more efficient planning for maintenance and inserts procurement. For application-specific recommendations or to secure delivery from Emmerich, contact Metav Werkzeuge—refer to Teknik Cutting Tools' U408TM specification and request tailored machining advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: U408TM Manufacturer: Teknik Makina Core dimensions Diameter: 17 mm Cutting length: 68 mm Overall length: 146 mm Shank diameter: 25 mm Clamping length: 56 mm Weight: 0.338 kg Compatibility & features Indexable drill body for insert mounting Compatible insert type: SOMT 0602 Compatible insert manufacturer: Taegutec FAQ What insert type does the tool use? The tool is designed for SOMT 0602 indexable inserts; the U408TM accepts this insert format for straightforward edge replacement. What is the nominal drilling diameter offered? The drilling diameter is 17 mm, which is the nominal size for this indexable drill body and the basis for insert selection. Which shank diameter is required for clamping? The tool features a 25 mm shank; a matching holder or chuck with adequate clamping surface is recommended to ensure stability. How deep can the tool cut effectively? The effective cutting length is 68 mm; this specifies the maximum engagement length for the insert before the body’s geometry limits penetration depth. Is the U408TM compatible with Taegutec inserts? Yes, the U408TM is compatible with Taegutec-style inserts of the SOMT 0602 designation and is suitable for setups using those grades and geometries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high‑stability shank design and standardised insert compatibility to increase machining reliability and reduce tool change downtime; order the tool via Metav Werkzeuge or request detailed technical advice from the Metav consultants. Indexable Insert Drill U157TM — 23.5 mm diameter, 25 mm shank (Teknik Makina) A robust Indexable Insert Drill U157TM designed for precision holemaking with Korloy indexable inserts, suitable for use in standard 25 mm toolholders. 23.5 mm cutting diameter 25 mm shank diameter Compatible with Korloy WCM‑0402 inserts 69 mm cutting length Higher throughput with an optimised geometry The design focuses on measurable productivity: a 23.5 mm cutting diameter combined with a 69 mm cutting length allows for deeper, single‑pass operations where appropriate, reducing the number of tool changes per workpiece. The tool body is engineered for rigidity to minimise vibration and contribute to consistent cycle times. By using a tool that matches common industrial insert standards, process planners achieve predictable material removal rates and can quantify potential time savings in production schedules. Predictable accuracy through standardised interfaces Compatibility with the Korloy WCM‑0402 insert format and a 25 mm shank ensure straightforward integration into existing toolholder ecosystems. The standardised insert interface makes it simple to replicate cutting conditions across multiple machines, helping production engineers maintain repeatable hole quality. The combination of a precise shank dimension and a defined cutting length promotes stable clamping and concentricity, which are essential for maintaining tight hole tolerances in repeated series. Easy handling and reliable replacement strategy With a 150 mm total length and a shank engagement length of 56 mm, the tool is dimensioned for secure mounting and accessible insert replacement. The modest mass of 0.413 kg simplifies manual handling when fitting the tool to the spindle or changing inserts, reducing ergonomic strain in the workshop. Where operators are less familiar with indexable systems, the modular nature of insert tooling reduces downtime: worn inserts are replaced quickly without discarding the entire tool body, supporting predictable maintenance planning and cost control. For procurement or detailed specification requests related to this Teknik Makina indexable insert drill, contact Metav Werkzeuge in Emmerich for precise application advice and supply options — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: U157TM Manufacturer: Teknik Makina Product type: Indexable insert drill Facts Diameter: 23.5 mm Shank diameter: 25 mm Cutting length: 69 mm Shank length: 56 mm Total length: 150 mm Weight: 0.413 kg Special features Suitable for Korloy WCM‑0402 inserts Compatible insert supplier: Korloy Shank mounting diameter 25 mm FAQ What is the nominal diameter of the tool? The tool has a nominal cutting diameter of 23.5 mm for the Teknik Makina indexable insert drill U157TM. Which inserts are compatible with this drill? This drill is designed for use with Korloy WCM‑0402 indexable inserts; the insert pocket and clamping arrangement match that standard. What shank dimensions are relevant for holder selection? Key dimensions are a 25 mm shank diameter and a 56 mm shank engagement length; the overall tool length is 150 mm. How deep can this tool cut in a single pass? The defined cutting length is 69 mm; this determines the maximum workable depth per insert configuration and should be matched to the application and insert grade. What is the tool weight for handling considerations? The tool weighs 0.413 kg, which supports easy manual handling when mounting or changing inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a high-performance solid drill that combines a precise 23 mm diameter, an extended 69 mm cutting length and a secure 25 mm shank for reliable deep-hole machining; order the tool directly via Metav Werkzeuge or consult our specialists for application support. Solid drill U156TM by Teknik Makina — 23 mm diameter, 69 mm cutting length A robust solid drill U156TM designed for indexable WCM-0402 inserts, optimised for stable deep-hole drilling in machining and toolroom applications. 23 mm diameter for standardised holes 69 mm cutting length for deeper bores 25 mm shank for secure clamping Improved drilling performance for production environments The solid design delivers consistent chip formation and stable cutting conditions, which translates into higher process reliability in series production. With a 69 mm cutting length, this drill enables deeper penetration without changing the tool, reducing cycle time and machine downtime. The tool’s geometry is matched to indexable insert technology, so the combination of insert and body ensures repeatable hole quality and efficient chip evacuation. Compatibility and cost-efficiency through indexable inserts Designed to accept WCM-0402 inserts from Korloy, the tool provides an economical approach to machining: only the inserts are replaced when worn, not the entire drill body. This results in lower tooling costs and faster changeovers. The 25 mm shank diameter ensures secure clamping in standard toolholders, supporting concentricity and minimising runout for improved surface finish and hole tolerances. Practical advantages for the workshop and production planning Weighing 0.4 kg and featuring a total length of 150 mm, the tool is compact enough for versatile setup while offering the reach required for many component geometries. The drill’s measured dimensions and insert system simplify tool inventory management and procurement planning, helping to reduce the number of unique toolholders and increasing operational flexibility on the shop floor. Contact Metav Werkzeuge today for detailed application advice and to arrange availability from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U156TM Manufacturer: Teknik Makina Facts Diameter: 23 mm Cutting length: 69 mm Shank diameter: 25 mm Shank length: 56 mm Total length: 150 mm Weight: 0.4 kg Special features Solid drill design Compatible with Korloy indexable inserts Insert type: WCM-0402 Files available: 62de7ec3a9cff922f4703d40, 62de7ddaa9cff922f4703d13 FAQ What insert type does this drill use? The drill accepts WCM-0402 indexable inserts, specified for use with the solid drill U156TM and compatible with Korloy insert geometry. Is the shank suitable for standard toolholders? Yes, the 25 mm shank diameter is intended for secure clamping in standard holders, ensuring concentricity and reduced runout for precise holes. What drilling depth can be achieved with this tool? With a 69 mm cutting length and a total length of 150 mm, the tool is optimised for deeper through-holes and many blind-hole applications in general machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a cost-efficient, maintainable indexable drilling solution: the combination of Ø 24 mm diameter, 72 mm cutting length and compatibility with SOMT 08T3 inserts reduces tooling cost while keeping production flow stable. Order the tool directly via Metav Werkzeuge or consult their specialists for application advice. Indexable drill U322TM – Indexable drill body, Ø 24 mm, Teknik Makina The indexable drill U322TM is a tool body designed for efficient holemaking where fast insert changes and secure clamping are required in industrial production environments. Indexable design for fast insert replacement Accepts SOMT 08T3 inserts (Taegutec compatible) Ø 24 mm with 72 mm cutting length 25 mm shank for secure toolholding Reliable production results with reduced tooling cost The U322TM offers a pragmatic balance between performance and economy: its indexable insert concept keeps consumable costs low because only the inserts require replacement, not the entire tool. With a 72 mm cutting length and a precisely machined body, the design promotes consistent hole quality over series runs. For operations that favour predictable tool life and straightforward reconditioning, this approach lowers total cost of ownership while maintaining repeatable hole dimensions. Quicker changeovers and less downtime Indexable inserts such as the SOMT 08T3 enable fast, repeatable insert changes without complex regrinding, shortening downtime during tool swaps. The tool body accepts inserts from the Taegutec family, simplifying procurement when standard inserts are already in use on the shop floor. The indexable format supports rapid set-up procedures and contributes directly to higher machine uptime and throughput. Secure clamping and stable machining A 25 mm shank and a balanced overall length of 150 mm provide the rigidity necessary for stable cutting, especially when paired with appropriate toolholders. The clearly defined cutting length and shank dimensions help planners select the correct combination of holder and machine spindle interface, reducing runout and improving hole roundness. The robust mounting and geometric accuracy of the body translate into reliable process capability in repetitive drilling tasks. Practical application guidance and compatibility The U322TM is supplied as a tool body intended for use with indexable inserts; operators should procure the SOMT 08T3 insert seats and compatible Taegutec inserts to complete the assembly. Replacement inserts can be rotated to present fresh cutting edges, restoring cutting performance quickly and economically. For manufacturing environments that prioritise predictable downtimes and straightforward inventory of spare parts, the indexable concept is particularly advantageous. Contact Metav Werkzeuge today to confirm the Teknik Makina U322TM’s suitability for the intended application and to secure reliable delivery from Emmerich Technical data Article number: U322TM Manufacturer: Teknik Makina ECLASS: 21180201 Facts Diameter: 24 mm Cutting length: 72 mm Overall length: 150 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.446 kg Special features Indexable insert tool body Accepts SOMT 08T3 inserts Compatible with Taegutec inserts SKU U322TM FAQ What inserts fit the U322TM? The U322TM accepts SOMT 08T3 inserts and is compatible with inserts from Taegutec, enabling straightforward procurement of replacement cutting edges. What are the key dimensions of this indexable drill body? Key dimensions are Ø 24 mm diameter, 72 mm cutting length, 150 mm overall length and a 25 mm shank; these figures define holder selection and reach. Is the U322TM supplied with inserts? The U322TM is a tool body designed for indexable inserts; the body is listed under SKU U322TM, while inserts such as SOMT 08T3 are ordered separately. How does the indexable concept benefit production? Indexable systems like the U322TM reduce consumable cost and shorten maintenance time because worn edges are replaced by rotating or fitting new inserts rather than replacing the entire tool body. Which manufacturer produced the tool body? The tool body is produced by Teknik Makina and is described under SKU U322TM for industrial drilling applications. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable drill solution that pairs a Ø 30 mm cutting diameter with a 150 mm cutting length for consistent bore quality; order directly via Metav Werkzeuge or request assistance from our consultants for application matching. Vollbohrer U790TM – indexable insert drill body, Ø 30 mm, 150 mm cutting length (Teknik Cutting Tools) The Vollbohrer U790TM is an indexable insert drill body engineered for precision metalworking where repeatable hole quality and fast insert changes matter Indexable design for WCM-06T3 inserts Ø 30 mm diameter for medium holes 150 mm effective cutting length 32 mm shank for rigid clamping Consistent bore performance through clear dimensions and design The drill body delivers measurable stability by combining a Ø 30 mm cutting diameter with a 150 mm cutting length and a 32 mm shank, all contributing to reduced vibration and improved concentricity. These core dimensions — 241 mm overall length and a mass of 0.992 kg — are specified for planning fixture layouts and calculating tool overhang. The indexable concept eliminates the need to resharpen cutters: worn inserts are replaced quickly, keeping cycle times low while maintaining repeatable hole tolerances. For engineers assessing tool life and process capability, the unitary specification offers a verifiable basis for tool selection. Practical benefits for machining campaigns and changeover times Designed to accept Korloy inserts of type WCM-06T3, this drill body supports rapid maintenance routines and predictable operating costs. The insert-compatible workflow reduces downtime compared with solid-carbide alternatives because individual cutting edges can be exchanged without replacing the whole tool. Where batch sizes vary, that translates into lower inventory cost for cutting edges and faster recovery after a tool failure. The robust 32 mm shank provides secure clamping in matching holders, helping to preserve tool geometry under load and enabling stable feed rates for efficient material removal. Ready for integration and backed by a European quality filter Specified as a precision tool body from Teknik Cutting Tools and listed under SKU U790TM, this component is suitable for series production where tool repeatability is essential. The straightforward geometry simplifies documentation and spindle setup, while the compatible insert system keeps consumables standardised. Metav’s stock and quality control in Emmerich act as a practical assurance for delivery reliability and product inspection, supporting procurement decisions with an experienced distribution partner and technical consultancy when required. For a tailored quotation or to confirm suitability for a specific application, contact Metav Werkzeuge for direct delivery from Emmerich and expert consultation on the U790TM drill body Technical data Article number: U790TM Manufacturer: Teknik Makina Core dimensions Diameter: 30 mm Cutting length: 150 mm Shank diameter: 32 mm Shank length: 58 mm Overall length: 241 mm Weight: 0.992 kg Compatibility & features Compatible inserts: WCM- 06T3 Compatible insert manufacturer: Korloy Product type: Indexable insert drill body FAQ Which insert type fits this drill body? The U790TM accepts WCM-06T3 indexable inserts and is specified for use with Korloy-manufactured cutting plates. What are the key dimensions to consider for setup? Key figures for the Vollbohrer U790TM are Ø 30 mm diameter, 150 mm cutting length, 32 mm shank diameter and 241 mm overall length. How does the shank size affect clamping and stability? A 32 mm shank offers a rigid connection to compatible toolholders, improving stability and supporting consistent hole quality under production feeds. What is the item number and who manufactured it? The item is listed as SKU U790TM and is supplied by Teknik Cutting Tools; full manufacturer details follow below. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 24.5 mm cutting diameter and the compatibility with SOMT 08T3 inserts to equip production with a standardised, service-friendly drilling solution; order via Metav Werkzeuge or contact our consultants to confirm fit and delivery. Indexable drill body U323TM by Teknik Cutting Tools — Ø 24.5 mm, for SOMT 08T3 inserts The Indexable drill body U323TM is a purpose-built drill holder designed for industrial CNC drilling operations, compatible with Taegutec SOMT 08T3 indexable inserts and intended for stable, repeatable holemaking. Compatible with Taegutec SOMT 08T3 inserts 24.5 mm cutting diameter for common hole sizes 25 mm shank diameter for standard toolholders 72 mm cutting length for deeper drilling operations Lower tooling costs through widely available inserts By accepting the SOMT 08T3 insert format, this drill body reduces inventory complexity and lowers per-hole tooling costs. The use of industry-standard indexable inserts keeps regrind and replacement cycles predictable and economical, enabling faster turnaround in maintenance. The modular design of the tool body allows replacement of the cutting edges without removing the entire holder, which shortens machine downtime and supports lean production scheduling. Stable drill geometry for consistent hole quality A 25 mm shank combined with a 72 mm cutting length and 150 mm overall length provides a balanced geometry that supports concentric clamping and reduces vibration in typical CNC spindles. The rigid configuration delivers repeatable diameters and bore straightness across production runs, which is essential for processes that require narrow tolerances. The component weight of 0.452 kg contributes to steady machining dynamics while remaining manageable for tool change systems. Seamless integration with established tool systems Designed for compatibility with Taegutec inserts and common toolholders, the holder integrates easily into existing toolsets. The 24.5 mm nominal cutter size fits a broad range of applications where this hole diameter is required, and the SOMT 08T3 interface makes sourcing replacement inserts straightforward. This compatibility supports a predictable supply chain and simplifies preventive maintenance planning in busy workshops. For reliable drilling with Teknik Cutting Tools' indexable drill bodies, contact Metav Werkzeuge in Emmerich to confirm suitability and delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: U323TM Manufacturer: Teknik Makina Facts Cutting diameter: 24.5 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 72 mm Shank length: 56 mm Weight: 0.452 kg Special features Compatible insert: SOMT 08T3 Compatible insert manufacturer: Taegutec Indexable insert drill body design Designed for CNC drilling/toolholder systems FAQ Which inserts fit this drill body? The Indexable drill body U323TM by Teknik Cutting Tools accepts SOMT 08T3 indexable inserts, compatible with Taegutec insert ranges. What is the cutting diameter and shank size? The tool offers a 24.5 mm cutting diameter with a 25 mm shank diameter; the SKU is U323TM from Teknik Cutting Tools. How deep can this tool cut effectively? The holder provides a 72 mm cutting length and a 150 mm overall length, suited to deeper holemaking within those dimensions. Is the tool suitable for standard CNC toolholders? Yes. The design of the Indexable drill body U323TM matches common toolholder interfaces for a 25 mm shank, enabling direct integration into many CNC setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine reliable performance with low downtime and straightforward insert changes thanks to internal coolant and a robust 32 mm shank; order the tool via Metav Werkzeuge or consult our specialists for application advice. S780-3TM 32 mm Indexable-Insert Shank Milling Cutter – Internal Coolant (Teknik Makina) The S780-3TM indexable-insert shank milling cutter is designed for efficient, repeatable milling using XNKU 06T3 inserts and offers internal coolant for improved cutting-edge life. Indexable-insert system for quick reconditioning 32 mm shank for secure clamping and rigidity Internal coolant to extend insert service life Compatible with Palbit XNKU 06T3 inserts Stable clamping and consistent machining results A solid 32 mm shank and a total length of 150 mm deliver the rigidity required for reproducible machining cycles. The tool’s geometry, combined with four cutting edges, reduces vibration and supports consistent surface quality when compared with less rigid alternatives. For production environments where predictable tolerances matter, the shank dimension and balanced design translate into fewer rejects and less rework, improving overall process efficiency. The tool’s mass (approx. 1.09 kg) contributes to dampening during heavy feed cuts, so cycle times remain stable across repeated operations. Internal cooling and efficient insert handling for lower operating costs Internal coolant directed to the cutting zone means better chip evacuation and cooler cutting edges, which directly reduces thermal wear on the insert seats and extends service intervals. The cutter accepts XNKU 06T3 indexable inserts (compatible with Palbit), allowing rapid edge changes instead of full-tool replacement. Insert clamping is performed with a Torx T8 key and M2.5x5.5 screws, simplifying maintenance at the bench. These characteristics produce measurable savings: fewer tool-change stops, lower consumable waste and a reduced cost per cutting edge, all of which support a leaner production workflow. Practical application and time-saving operation for workshops and production Designed for users who prefer indexable tooling, this shank cutter suits repetitive milling tasks where fast maintenance and tool longevity are priorities. The 80 mm cutting length offers a good balance between reach and rigidity, enabling both face and light slot milling in setups that favour quick insert turnover. By standardising on an indexable system compatible with commonly stocked XNKU 06T3 inserts, procurement becomes simpler and faster. For operations that value uptime and traceable tool performance, the combination of internal coolant and standardised insert format helps maintain throughput and reduces the need for emergency replacements. For a detailed application check or to source the S780-3TM with tailored delivery from Emmerich, contact Metav Werkzeuge for technical guidance and supply arrangements Technical data SKU: S780-3TM Product type: Indexable-insert shank milling cutter Manufacturer: Teknik Makina Core technical data Shank diameter: 32 mm Overall length: 150 mm Cutting length: 80 mm Cutting edges: 4 Weight: 1.09 kg Materials & features Internal coolant: yes Compatible inserts: XNKU 06T3 Compatible insert manufacturer: Palbit Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts are compatible with this cutter? The cutter accepts XNKU 06T3 indexable inserts; compatibility with Palbit inserts ensures easy sourcing of spare edges. Does the tool provide internal cooling? Yes, the S780-3TM features internal coolant, which improves chip evacuation and prolongs insert life under continuous use. What are the key dimensions for clamping? Shank diameter is 32 mm with a total length of 150 mm and an 80 mm cutting length, offering a balance of reach and rigidity. How many cutting edges are fitted and how are they secured? The tool carries four cutting edges, each secured with M2.5x5.5 screws tightened using a Torx T8 key for straightforward insert changes. Who should consider this indexable-insert milling cutter? Workshops and production shops that prioritise fast insert replacement, consistent machining and the benefits of internal coolant will find the S780-3TM particularly suitable. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping with a precision M6 thread and durable metal construction for reliable retention of indexable inserts; purchase directly via Metav Werkzeuge or consult the team for compatibility and procurement support. Spring for indexable inserts (M6 thread) — Teknik Makina A Spring for indexable inserts engineered to secure cutting inserts in standard toolholders via an M6 thread, offering consistent retention for machining applications. M6 threaded design for standard holders Durable metal construction Ideal for indexable insert clamping Long service life and consistent retention Reliable clamping that reduces downtime The M6-threaded spring is designed for straightforward integration into standard insert holders, providing a secure clamping method that minimises insert movement during cutting. Because the component is machined with attention to metalworking standards, it contributes to consistent tool performance and fewer interruptions for retightening. For production environments where repeatability matters, this part supports stable cutting conditions and helps to keep cycle times predictable. Compatibility with common insert systems Compatibility is central to workshop efficiency. The spring is intended for use with indexable inserts and mates with holders that accept an M6 securing element. The standardised thread reduces the need for bespoke fixtures and simplifies spare-part management. Maintenance cycles and tool-change procedures can therefore be streamlined, lowering administrative overhead and allowing an emphasis on machining quality rather than parts logistics. Built to last under routine workshop loads Constructed from high-quality metalworking materials, the component emphasises durability and long service life. This reduces the frequency of replacements and supports a lower total cost of ownership in the medium term—an important consideration in production planning. The robust nature of the spring also resists common wear mechanisms in clamping applications, maintaining retention force and contributing to steady machining results over time. Practical advantages for procurement and stock control As a compact, easy-to-store item with a light mass (approx. 0.1 kg), the spring is convenient for central stocking and fast replenishment. Standardisation around the M6 thread allows buyers to rationalise inventory across multiple machines and toolholders. The clear technical specification and simple geometry also make quality checks and replacements straightforward for workshop teams and purchasing departments alike. For dependable clamping components from Teknik Cutting Tools, contact Metav Werkzeuge for procurement and technical advice — Metav Werkzeuge offers direct supply and consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BY040TM Manufacturer: Teknik Makina Suitable for: indexable inserts (thread M6) Weight: 0.1 kg ECLASS: 21189290 Facts Thread: M6 Weight (kg): 0.1 ECLASS ID: 21189290 Special features High-quality metal processing Designed for insert clamping Compatible with standard toolholders Long service life and consistent retention FAQ What is the thread size for this spring? The spring uses an M6 thread suitable for standard insert clamping applications and is listed under SKU BY040TM. Can this spring be used with all indexable insert brands? The component is designed for common toolholders that accept an M6 securing element; compatibility with specific insert systems should be confirmed against the holder design. How durable is the spring in daily workshop use? Manufactured with high-quality metalworking standards, the spring provides long service life and maintains retention force under routine machining conditions. Is the weight significant for inventory planning? At approximately 0.1 kg, the spring is compact and easy to store, supporting efficient stock management. Which manufacturer produces this part? This spring is supplied by Teknik Makina and is distributed via Metav Werkzeuge under SKU BY040TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact spare part that ensures consistent tension, fits calipers with an M5 thread and keeps maintenance simple; order the replacement directly via Metav Werkzeuge or ask the consultants for compatibility support. Spring BY043TM – Caliper replacement spring with M5 thread by Teknik Makina A spring BY043TM designed as a direct replacement for precision calipers, providing reliable jaw tension where an M5 threaded mount is required Suitable for calipers with M5 thread Lightweight at 0.1 kg for easy handling Produced by Teknik Makina Reliable threaded fit for repeatable measurements The threaded connection with an M5 thread assures a secure mechanical interface for precision measuring tools. A correctly matched thread eliminates lateral play and maintains consistent tension between measuring jaws, which directly contributes to reliable measurement results. For workshops that require repeatability, a properly seated spring reduces the need for frequent recalibration and supports process stability in daily inspection routines. Compact spare that reduces downtime and storage complexity With a mass of 0.1 kg, this component is intentionally compact and easy to store as part of a spare-parts inventory. The small footprint means replacement components can be kept on hand without occupying valuable bench space, accelerating simple maintenance tasks. When a measuring instrument shows reduced jaw tension, exchanging the spring is a straightforward operation that restores functionality quickly and minimises interruption to production or inspection workflows. Practical use and straightforward maintenance for workshops Designed for straightforward replacement in calipers accepting M5 fittings, this spare part is ideal for workshop technicians and service engineers who maintain measuring equipment. The straightforward mechanical function of the part means no specialised training is required for exchange; a standard threaded removal and installation restores the original performance characteristics. Keeping such components available contributes to a robust in-house maintenance strategy and supports long-term tool reliability. For supply and spare-part advice for Teknik Makina products, contact Metav Werkzeuge for expert guidance and rapid dispatch from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 for bespoke assistance Technical data Article number: BY043TM Manufacturer: Teknik Makina Classification: eClass 21189290 Suitable for calipers: M5 thread Numbers / Core technical data Weight: 0.1 kg SKU: BY043TM Special features / Versions Replacement spring for calipers with M5 thread Compact spare-part design Intended for maintenance and repair FAQ Is this spring compatible with my caliper? Compatibility is determined by the caliper’s mounting: the spring BY043TM fits calipers that accept an M5 thread connection; confirm the thread size on the instrument before ordering. How difficult is the replacement process? Replacement is mechanical and straightforward: the threaded mounting is removed and the new spring installed using standard hand tools; the BY043TM restores jaw tension without specialised equipment. What are the dimensions or weight of the part? The spare spring has a weight of 0.1 kg; the critical compatibility parameter is the M5 thread rather than external dimensions. Who manufactures this component? This part is supplied by Teknik Makina and listed under SKU BY043TM for workshop spare-part provisioning. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Turning Holder (Klemmhalter) — SRGC for RCMT Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a left-hand toolholder optimised for RCMT 10T3 indexable inserts, designed for stable clamping and reliable turning operations in metalworking workshops. Turning Holder SRGCL 2525 for RCMT 10T3 inserts 150 mm Overall length for compact setups 25 × 25 mm Shank for secure fixture 30° Cutting Angle for consistent geometry Left‑hand Cutting Direction for dedicated turning tasks Secure clamping that stabilises your machining The SRGCL 2525 design provides a compact footprint with a 25 × 25 mm shank and a 32 mm cutting-head width, which together enable firm seating of RCMT 10T3 inserts. This firm clamping reduces vibration and contributes to a more consistent Surface Finish on turned parts, making setup more predictable for everyday workshop turning. For users new to indexable tooling, a stable holder means fewer re‑adjustments and more repeatable results. Defined 30° geometry for reliable chip control A 30° Cutting Angle combined with a left‑hand Cutting Direction offers predictable cutting engagement and chip flow for operations that require that orientation. The specified geometry helps maintain cutting forces within expected ranges, which supports tool life and dimensional stability of workpieces. For customers unfamiliar with cutting-angle terminology: the angle describes the insert seating and approach to the workpiece and directly affects chip formation and surface quality. Compact length and balanced mass for practical use With an Overall Length of 150 mm and a weight of 0.72 kg, the holder balances reach and rigidity for general turning tasks. The moderate length keeps the tool close to the machine spindle, improving stiffness compared with overly long setups. The ISO designation SRGCL 2525 indicates a standardised shank profile and mounting geometry, which simplifies integration into common tool posts and quick‑change systems. Who benefits from this holder and typical applications Operators and workshops that use RCMT 10T3 indexable inserts for turning will find this holder particularly suitable for left‑hand turning operations where a compact, standardised clamping solution is required. The configuration supports medium‑duty turning, finishing passes, and applications where consistent insert positioning is essential. For teams seeking compatibility and straightforward tool management, the SRGCL form factor streamlines inventory and setup. Strongly consider the Teknik Makina Turning Holder for stable, repeatable left‑hand turning — for personalised technical advice and purchasing assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications for reliable setup Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D292TM Compatible Indexable Inserts: RCMT 10T3 Overall Length: 150 mm Weight: 0.72 kg ISO Designation: SRGCL 2525 Secondary Designation: M10 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 30° Cutting Direction: left GTIN: 4061905154225 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and what does that mean in practice? The Turning Holder (Klemmhalter) by Teknik Makina is designed for RCMT 10T3 indexable inserts; this means you can use commonly available RCMT 10T3 grades for a range of finishing and light‑to‑medium turning operations with predictable insert seating and straightforward replacement. Is the SRGCL 2525 compatible with my tool post and how to check? The SRGCL 2525 designation indicates a standardised shank profile; check that your tool post accepts a 25 × 25 mm holder. If uncertain, METAV Werkzeuge can advise whether the Teknik Makina Turning Holder matches your machine interfaces and recommend any adapters. What does the 30° Cutting Angle and left‑hand direction imply for machining choices? A 30° Cutting Angle in this Teknik Makina holder positions RCMT 10T3 inserts for controlled chip breakage and surface quality; choose left‑hand turning setups or arrange workholding so that the tool approaches the workpiece in the left‑hand orientation specified. Can METAV Werkzeuge help with technical questions before buying the Turning Holder? Yes. METAV Werkzeuge offers detailed consultation for tooling choices, setup recommendations and compatibility checks for the Turning Holder by Teknik Makina — contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support. 150mm SRGCL 2525 Turning Holder for RCMT 10T3, 30° Cut, Left — Teknik Makina