Gibt es einen Hahn und Kolb Online Shop?

Benefit from a combination of precise 5 mm cutting width, 22 mm maximum grooving depth and proven compatibility with Horn inserts for reliable parting and grooving operations; order the grooving clamping holder directly via Metav Werkzeuge or consult our specialists if clarification is required Grooving clamping holder – right-hand, 5 mm cut width | Teknik Makina Grooving clamping holder for right-hand parting and narrow-groove operations, compatible with Horn inserts and designed for secure mounting in a 5C-R S229 shank Right-hand cutting direction 5 mm cutting width for narrow grooves 22 mm max grooving depth Compatible with Horn inserts Precise narrow-groove performance that reduces rework The Teknik Makina grooving clamping holder delivers consistent, repeatable results when producing narrow grooves or parting off stock. With a 5 mm cutting width and a maximum grooving depth of 22 mm, the toolholder provides a defined cut profile that helps avoid excessive material remachining. The controlled geometry supports stable chip formation and predictable tool life, which in turn reduces downtime and contributes to higher throughput in batch turning processes. Secure clamping and straightforward integration into turning setups Designed with a standard ISO 2525 interface and a 5C-R S229 mounting shank, the holder ensures compatibility with common boring-bar configurations and workshop toolposts. The compact head and 25 mm height/width dimensions support rigid clamping, while the measured mass of 0.709 kg contributes to rotational stability without adding unnecessary inertia. Compatibility with Horn-manufactured inserts simplifies inventory management and allows the selection of established cutting grades for specific materials. Practical benefits for workshop efficiency and set-up speed With an overall length of 150 mm, this right-hand holder is sized for easy handling and predictable overhang in typical lathe setups. The robust clamping mechanism and defined cutting geometry reduce the need for repetitive adjustments, accelerating set-up and stabilising cycle times. The combination of a compact form factor and standard interfaces makes the holder suitable for small-batch shops and production environments that prioritise reliable, low-variation grooving and parting operations. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina grooving clamping holder into existing turning cells and for prompt supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: D698TM Manufacturer: Teknik Makina SKU: D698TM ISO designation: 2525 Facts Overall length: 150 mm Holder height: 25 mm Head width: 25 mm Cutting width: 5 mm Max grooving depth: 22 mm Weight: 0.709 kg Cutting direction: Right Special features Compatible with Horn inserts Mounting shank: 5C-R S229 Right-hand grooving holder Suited to narrow-groove and parting operations FAQ What cutting direction does the holder use? The holder is configured for right-hand cutting, suitable for standard lathe set-ups where right-hand grooving is required. Which inserts are compatible with this holder? Compatibility is specified for inserts from Horn and the holder follows the ISO 2525 designation for insert seating. What is the maximum grooving depth supported? The toolholder supports a maximum grooving depth of 22 mm, enabling deeper narrow-groove and parting tasks. What mounting shank is required for installation? The holder is designed for a 5C-R S229 shank interface for secure mounting in appropriate boring bars or toolposts. How long is the holder and how does that affect setup? The overall length is 150 mm, providing a balance between reach and rigidity for reliable turning operations. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability grooving clamping solution that combines a narrow 2 mm cutting width with an 18 mm maximum plunging depth for efficient parting and groove operations; order directly via Metav Werkzeuge or consult our advisors for machining suitability. Grooving clamping holder by Teknik Makina — right-hand, 2 mm cutting width Grooving clamping holder (parting toolholder) for right-hand grooving and parting applications in turning and CNC lathe operations Right-hand grooving holder, 2 mm cutting width Max plunging depth 18 mm for deeper cuts Compatible with Horn indexable inserts 25 mm shank and head width for secure clamping Precise groove control with minimal material loss The compact clamp is engineered for consistent groove geometry and low side force during parting operations. The 2 mm cutting width yields narrow kerfs, reducing material removal and scrap while improving surface finish. The design supports stable chip formation, which benefits cycle time and tool life. Right-hand cutting orientation is indicated as right, meaning the tool engages the workpiece when fed from the right-hand side; this orientation should be planned into the machining strategy for predictable results. Robust shank dimensions for vibration reduction A solid tool body with a 25 mm shank and matching head width delivers mechanical rigidity where it matters most. The 150 mm overall length provides a useful reach without compromising stiffness, and the mass of 0.713 kg contributes to damping of machining vibrations. The result is fewer chatter marks and more reliable repeatability in series production, which supports consistent part tolerances and reduced rework for busy workshops. Simplified integration with indexable insert systems Designed to accept inserts from established manufacturers, the holder is specified as compatible with Horn indexable inserts, easing supply and regrind logistics. The ISO designation 2525 indicates the holder form for straightforward replacement and fixture planning. With a maximum plunging depth of 18 mm, the clamp is suitable for deeper groove and parting tasks while retaining secure clamping of the insert, so set-up times are shortened and process stability is improved. Contact Metav Werkzeuge for tailored advice on Teknik Makina grooving clamping holders and to secure reliable supply from Emmerich — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical Data Article number: D702TM Manufacturer: Teknik Makina Product name: Grooving clamping holder Cutting direction: right Facts Shank / head width: 25 mm Holder height: 25 mm Cutting width: 2 mm Max plunging depth: 18 mm Overall length: 150 mm Weight: 0.713 kg Compatibility & Features Compatible with Horn indexable inserts ISO designation: 2525 Compatible boring bar reference: 2C-R S224 FAQ What cutting width does the holder support? The holder supports a 2 mm cutting width, suitable for narrow grooves and precise parting operations with controlled kerf width. Can the clamp perform plunging cuts and how deep? Yes, the toolholder allows plunging to a maximum depth of 18 mm, enabling deeper groove and parting operations when required. Which inserts are compatible with this holder? This Teknik Makina holder is compatible with Horn indexable inserts and follows the ISO designation 2525 for predictable insert seating. What are the important dimensions for fixture planning? Key dimensions are a 25 mm shank and head width, 150 mm overall length, and a weight of 0.713 kg, useful for assessing reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine 25 mm cutting-head rigidity with MGM 3 insert compatibility for reliable, repeatable grooving; order the D805TM through Metav Werkzeuge or consult our technical team for integration advice and supply. D805TM Grooving tool holder — left‑hand, 25 mm cutting‑head (Teknik Cutting Tools) The D805TM grooving tool holder is a left‑hand parting and grooving holder designed for medium‑duty lathes and straightforward retrofit into established tool posts 25 mm cutting‑head width for robust rigidity Left‑hand cutting orientation for specific turning Compatible with MGM 3 inserts and Korloy plates Improved rigidity for consistent groove quality The holder’s 25 mm cutting‑head width and 40 mm cutting height are engineered to reduce vibration during parting and narrow‑slot operations, delivering a more consistent surface finish and longer tool life. By increasing stiffness at the contact point, the design translates directly into fewer rejects and less rework in small‑batch and production environments. The modest overall length of 150 mm and compact mass (approx. 0.73 kg) make the unit easier to clamp and balance on many common tooling systems without compromising stability. This results in measurable improvements in cycle time and keeps spindle loads predictable, which benefits throughput in high‑mix manufacturing. Straightforward integration and insert flexibility Compatibility with MGM 3 inserts and recognition of Korloy as an accepted plate supplier reduce procurement complexity and spare‑part diversity. The holder follows the ISO 2525 designation principles for shank geometry, while the clamping bar is specified as 3C‑L (110–150) to match common bar sizes. The effective cutting width of 3 mm and a maximum parting depth of 17 mm allow precise control over material removal for typical grooving tasks; insert changes and set‑ups are fast thanks to the accessible clamping mechanism. Reduced downtime from rapid insert replacement and standardised interfaces supports operational continuity and easier inventory management. Practical benefits for workshop efficiency and safety Designed for left‑hand cutting, the holder accommodates turning and grooving operations where the feed direction requires a mirrored set‑up. A maximum cutting diameter of 150 mm and a working diameter reference of Ø 110 mm offer broad applicability across turned components in metal‑working shops. The clamp design and measured mass help to lower handling fatigue during set‑up, while the solid construction supports repeatable seating and secure insert retention. For workshops focused on dependable daily output, this tool holder provides a balance of precision, ease of use and mechanical robustness — reducing operator uncertainty at the lathe and improving first‑pass yield. For tailored integration advice and fast supply from our European distribution hub, contact Metav Werkzeuge in Emmerich for technical support and ordering information. Technical data SKU: D805TM Manufacturer: Teknik Makina Designation: Grooving tool holder ISO designation: 2525 Compatible inserts: MGM 3 Compatible insert manufacturer: Korloy Facts Cutting‑head width: 25 mm Cutting height: 40 mm Maximum cutting diameter: 150 mm Cutting width: 3 mm Maximum parting depth: 17 mm Overall length: 150 mm Diameter (reference): 110 mm Shank cutting length: 25 mm Weight: 0.73 kg Special features Left‑hand cutting orientation Clamping bar designation: 3C‑L (110–150) Robust clamping system for rapid insert changes Suitable for parting and narrow grooving tasks FAQ What inserts fit this holder? The D805TM is specified for MGM 3 inserts and is compatible with Korloy‑type plates; the clamping design supports quick replacement and secure seating. Is the holder left‑hand or right‑hand? This tool holder is configured for left‑hand cutting and is intended for operations that require the feed and tool orientation to be mirrored. What is the maximum recommended cutting diameter? The holder supports a maximum cutting diameter of 150 mm with practical use around Ø 110 mm depending on machine configuration and workpiece setup. How heavy is the unit and will it affect balancing? The unit weighs approximately 0.73 kg, providing a compact mass that eases handling and minimises balance adjustments on most bench lathes and production turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise compatibility, solid mechanical design and clear dimensional data to ensure consistent grooving and parting operations. Order this tool directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Parting and Grooving Tool Holder D800TM – 25 mm Head, Left-hand (Teknik Makina) The Parting and Grooving Tool Holder is a left-hand clamping solution for production lathes, designed for stable parting and grooving with MGM 3 inserts and an ISO 2525-style mounting Left-hand cutting direction 25 mm head width for stable support Compatible with Korloy MGM 3 inserts 17 mm maximum plunge depth Consistent cutting performance driven by clear specifications The D800TM holder combines defined geometry with measurable limits to support reproducible cycles in turning operations. With a 25 mm head width and a 3 mm cutting width, this holder gives a stable support plane that reduces chatter and repeat adjustments. The left-hand configuration and a 60 mm maximum cutting diameter are stated to match common turning setups; such numeric constraints allow process planners to calculate opposing tool positions and ensure safe clearances before the first cut. Engineered compatibility for straightforward tool planning The tool carrier is specified for MGM 3 inserts and lists Korloy as a matching insert manufacturer, simplifying procurement and inventory decisions. The holder's ISO-style designation 2525 and the bore bar reference 3C-L (50-60) clarify which shank systems and bar sizes integrate directly. For production engineers this means fewer trial fits: insert selection, clamping torque and bar diameter compatibility are foreseen, shortening setup time and improving first-pass yield. Practical handling and set-up advantages on the shop floor Weight and useful lengths are often overlooked but matter for balancing and tool life. At approximately 0.741 kg and with a total length of 150 mm, the holder is compact enough for close-offset operations while offering a 25 mm cutting-stem length that keeps the insert engagement predictable. The maximum plunge depth of 17 mm secures safe parting depths without compromising rigidity, and the clear, measurable values enable quick checks with common workshop gauges and calipers during tool changeovers. Reliability and procurement benefits for workshops and subcontractors Choosing a holder with explicit numeric limits and standardised mounting reduces procurement risk and simplifies maintenance planning. The robust specification and compatibility notes support longer tool life through correct matching of insert geometry and clamping. For purchasing managers, the defined interface and compatibility with widely available Korloy inserts allow centralised sourcing and consistent spare-part lists, which supports uninterrupted production and predictable stock levels. For application advice on Teknik Makina’s D800TM or to confirm suitability for a specific lathe, contact Metav Werkzeuge for tailored guidance and rapid supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: D800TM Manufacturer: Teknik Makina Product: Parting and grooving tool holder (Stechklemmhalter) Compatible inserts: Korloy (MGM 3) ISO designation: 2525 Facts Total length: 150 mm Head width: 25 mm Cutting width: 3 mm Cutting height: 40 mm Shaft/usable cutting length: 25 mm Max cutting diameter: 60 mm Max plunge depth: 17 mm Weight: 0.741 kg Special features Left-hand cutting direction Bore bar designation: 3C-L (50-60) Designed for grooving and parting operations Robust clamping for indexable inserts FAQ Which inserts fit this holder? The holder accepts MGM 3 indexable inserts; the D800TM is specified to be compatible with Korloy MGM 3 grades for predictable cutting geometry. Is the cutting direction fixed? Yes, the D800TM is supplied for left-hand cutting and should be used in setups that require a left-hand tool orientation. What is the maximum plunge depth for grooving? The maximum plunge depth is 17 mm, allowing controlled parting and groove depths within that limit. Which bar diameters suit the holder? The holder references a bore-bar designation 3C-L (50-60), indicating compatibility with bar sizes in that range for correct mounting. Can this holder be used for heavy roughing cuts? The D800TM is designed for stable grooving and parting; machining strategy should respect the specified limits (cutting width, head support and max diameter) to avoid overload. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise right-hand parting with a 25 mm clamping head and a 4 mm cutting width for stable, repeatable grooves; order the tool via Metav Werkzeuge or consult our specialists for machining guidance. Stechklemmhalter D790TM – right-hand parting-off clamp holder with 25 mm head The Stechklemmhalter D790TM is a right-hand parting and grooving clamp holder designed for CNC lathes and turning centres; compatible with Korloy MGM 4 indexable inserts and engineered for standardised, production-oriented setups. Right-hand parting and grooving holder 25 mm clamping head width Compatible with Korloy MGM 4 inserts Ø80 mm shank, 150 mm overall length Consistent, controlled parting and grooving for production turning The holder provides a 25 mm clamping head paired with a narrow 4 mm cutting width, enabling precise parting and fine grooving operations with reduced vibration. The component’s geometry supports a 45 mm cutting height and a 20 mm maximum parting depth, which together maintain consistent engagement of the insert and help avoid chatter during interruptions of cut. The design intent is to deliver repeatable dimensional results on serial work, lowering scrap rates and stabilising cycle times. Low-downtime insert handling and standard compatibility Compatibility with Korloy MGM 4 indexable inserts and the ISO reference 2525 simplifies procurement and changeover. The holder fits the clamping bar designation 4C-R (80-110), making it suitable for setups that use standardised bar systems. These characteristics reduce setup complexity and shorten tool-change intervals, providing a tangible efficiency gain in workflows that require frequent insert replacement or diverse part runs. The right-hand cutting orientation is indicated for conventional turning directions on most lathes. Shop-floor stability with a compact, serviceable design A robust shank of Ø80 mm and a total length of 150 mm give the tool the rigidity needed for stable cuts while keeping overhang minimal. The cutting shaft length of 25 mm and a tool mass of 0.701 kg support balanced handling and straightforward mounting in compatible tool posts. Together these measures promote predictable tool behaviour throughout a production shift, which is particularly relevant where dimensional repeatability and short set-up times are priorities for maintenance of throughput and quality. For personalised machining advice or to procure the Teknik Makina D790TM parting-off clamp holder, contact Metav Werkzeuge for expert consultation and reliable supply from Emmerich. Technical data Article number: D790TM Manufacturer: Teknik Makina Designation: Stechklemmhalter Facts Clamping head width: 25 mm Cutting width: 4 mm Cutting height: 45 mm Max cutting diameter: 110 mm Max parting depth: 20 mm Shaft cutting length: 25 mm Shank diameter: 80 mm Overall length: 150 mm Weight: 0.701 kg Cutting direction: right Special features Compatible with Korloy MGM 4 inserts ISO designation: 2525 Bar holder designation: 4C-R (80-110) Suitable for parting and grooving applications Right-hand orientation for standard turning FAQ Which inserts fit this holder? The D790TM is compatible with Korloy MGM 4 indexable inserts; the holder is specified for standard MGM 4 geometries. What is the maximum parting depth? Maximum parting depth is 20 mm with the D790TM clamp holder when used within the stated setup parameters. Can the holder be mounted in standard bar systems? Yes — the holder matches the bar designation 4C-R (80-110) and the ISO reference 2525 for straightforward integration. Is the D790TM suitable for high-overhang applications? The Ø80 mm shank and 150 mm overall length provide rigidity for typical turning tasks, but excessive overhang should be avoided to maintain stability. What cutting direction is required? This holder is configured for a right-hand cutting direction and is intended for conventional right-hand parting and grooving. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, left-hand cutting and a compact overall length for predictable parting cycles; the design supports stable chip control and repeatable results. Order the Parting clamp holder D819TM directly via Metav Werkzeuge or ask our consultants if needed. Parting clamp holder D819TM — Left-hand parting and grooving tool holder with 25 mm head width by Teknik Makina The Parting clamp holder D819TM is a left-oriented parting and grooving tool holder engineered for machining centres and lathes where process stability and simple insert replacement are priorities. It is designed for use with Korloy MGM 5 indexable inserts and ISO 2525 shanks. 25 mm head width for stable parting Compatible with Korloy MGM 5 inserts Left-hand cutting orientation ISO 2525 shank, fits 5C-L (140–600) Engineered for consistent parting and grooving The holder’s 25 mm head width and 5 mm cutting width combine to deliver a firm cutting platform that reduces vibration during severing operations. For shops aiming to reduce rework and cycle-time variability, this geometry means cleaner parting edges and more predictable tool life. The specification for a maximum cutting diameter of 600 mm signals suitability for a wide range of turned components, from small batches to larger cylindrical parts, where controlled chip formation and repeatable cuts support higher throughput. Secure clamping for repeatable process performance A well-designed clamping interface and a cutting height of 49 mm ensure that the insert is held rigidly throughout each pass, contributing to consistent surface finish and minimised tool deflection. The holder’s ISO 2525 shank form and the fit for 5C-L (140–600) boring bars simplify integration into existing tool turrets and bar setups; this compatibility reduces changeover work and keeps spindle downtime low. The compact overall length of 150 mm and modest weight of 0.664 kg aid balance and handling while maintaining sufficient mass for damping cutting forces. Clear compatibility and straightforward setup Designed for use with Korloy MGM 5 inserts, the clamp holder streamlines insert selection and stock management in workshops that already use Korloy geometries. The left-hand cutting orientation is specified for applications where the cut direction is counter to right-handed tools, avoiding confusion at setup. With a nominal shank diameter 140 and practical mounting features, the holder integrates quickly into standard workflows, enabling rapid tool changes and consistent clamping without complex adjustments. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina Parting clamp holder D819TM and to discuss delivery options from Emmerich. Technical data SKU: D819TM Manufacturer: Teknik Makina Product name: Parting clamp holder Cutting direction: left Compatible inserts: Korloy MGM 5 Facts Head width: 25 mm Cutting width: 5 mm Cutting height: 49 mm Shank ISO: 2525 Overall length: 150 mm Diameter: 140 mm Max cutting diameter: 600 mm Weight: 0.664 kg Special features Fits boring bars 5C-L (140-600) Left-hand parting and grooving orientation Suitable for Korloy MGM 5 indexable inserts Shank designation ISO 2525 FAQ Which inserts are compatible with this holder? The Parting clamp holder D819TM accepts Korloy MGM 5 indexable inserts; the geometry is specified to match that insert series for reliable seating and chip control. Is this holder suitable for left-hand turning operations? Yes — the D819TM is configured for left-hand cutting orientation, making it appropriate for operations that require counter-directional parting cuts. Which shank and bar sizes does the holder fit? The holder uses an ISO 2525 shank form and is compatible with 5C-L (140–600) boring bars, enabling straightforward mounting in compatible tool turrets and bar setups. What maximum workpiece diameter can be machined with this tool? The holder is specified for a maximum cutting diameter of 600 mm, suitable for a broad range of turned components. How does the clamp design support process stability? Through a combination of a rigid clamping interface, 25 mm head width and a 49 mm cutting height, the D819TM reduces deflection and vibration, improving surface finish and repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, left‑hand parting performance with a 5 mm cutting width and 22 mm maximum cutting depth, paired with an ISO‑compatible shank for reliable clamping. Benefit from precise, repeatable parting operations — order the parting tool holder directly via Metav Werkzeuge or ask our consultants if needed. Parting Tool Holder D713TM by Teknik Makina — 5 mm cut width, left‑hand A robust Parting Tool Holder D713TM designed for left‑hand parting and grooving on lathes, compatible with Horn‑style indexable inserts and ISO 2525 shank standards. 5 mm cutting width for narrow grooves 22 mm maximum parting depth Left‑hand cutting orientation ISO 2525 shank, fits 5C‑L S229 bar Controlled parting for cleaner, faster separations The holder delivers consistent parting thanks to a narrow 5 mm cutting width and a controlled 22 mm maximum depth, which together reduce vibration and material distortion during separation. For operations where chip control and surface finish matter, the compact cutting geometry enables a predictable cut; the left‑hand orientation suits turning stations that require reverse‑direction parting. The result is a repeatable, efficient cycle time that supports higher throughput without sacrificing finish quality. Stable clamping that reduces tool chatter Built with a 25 mm head and a 25 mm holder body, the design focuses on rigidity and stability. The ISO 2525 designation and the matching 5C‑L S229 bar compatibility make it straightforward to integrate into standard tool posts and turret systems. With an overall length of 150 mm and a mass of 0.709 kg, the unit balances reach with damping characteristics to keep the cutting edge engaged rather than flexing — a practical advantage when producing consistent workpiece geometry and minimising rework. Compatibility and straightforward integration into workflows This clamp holder is prepared for common industry inserts (notably Horn‑style), simplifying inventory and reducing changeover time. The secure clamp mechanism supports fast insert replacement and stable seating, which contributes to lower machine downtime and predictable maintenance intervals. In mixed production environments, the holder’s conformity to established shank standards aids rapid toolset changes and supports tool rationalisation efforts. Practical benefits for production and toolroom environments Choosing this clamp holder brings immediate practical gains: improved process reliability, fewer scrapped parts, and easier standardisation across lathe fleets. The compact geometry aids access in tight operations while the specification set—5 mm cutting width, 22 mm depth, ISO 2525—makes it suitable for precision parting and grooving tasks. The compatibility with established insert systems reduces the need for specialised consumables and supports cost‑effective stocking. Discuss application requirements with Metav Werkzeuge to confirm compatibility and optimise tool setups for the Teknik Makina Parting Tool Holder D713TM — contact via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: D713TM Manufacturer: Teknik Makina Weight: 0.709 kg Overall length: 150 mm Cutting width: 5 mm Maximum parting depth: 22 mm Cutting direction: left Head width: 25 mm Holder width: 25 mm Holder height: 25 mm ISO designation: 2525 Compatible with: Horn inserts Bar designation: 5C‑L S229 Core specifications Weight: 0.709 kg Length: 150 mm Cutting width: 5 mm Max cutting depth: 22 mm Head/holder width: 25 mm Special features Left‑hand parting orientation ISO 2525 shank compatibility Designed for Horn‑style indexable inserts Compact geometry for tight access FAQ What is the maximum cutting depth of the parting tool holder? The maximum cutting depth is 22 mm for the Teknik Makina Parting Tool Holder D713TM, allowing controlled parting operations within that limit. Which inserts fit this holder? The holder is compatible with Horn‑style indexable inserts; the clamp design accommodates common insert sizes used for parting and grooving. Is the shank compatible with standard tool posts? Yes, the D713TM uses an ISO 2525‑type shank and matches the 5C‑L S229 bar designation for straightforward mounting in standard turrets and tool blocks. Can the holder be used for finishing as well as rough parting? The narrow 5 mm cutting width and rigid clamp make the holder suitable for precision parting where finish is important; cutting parameters should be adapted to material and insert geometry. What is the overall length and weight for balancing tool holders? Overall length is 150 mm and the mass is 0.709 kg, values useful for balancing and programming turning centres. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 25 mm clamping head, a narrow 5 mm cutting width and a 20 mm maximum plunge depth for stable, repeatable grooving and parting work. Order the parting tool holder directly via Metav Werkzeuge or request specification advice from our consultants. Parting tool holder — right‑hand grooving clamp holder by Teknik Makina, 25 mm head Parting tool holder for right‑hand grooving and parting operations in workshop turning applications, designed for use with Korloy MGM 5 inserts. 25 mm clamping head for stable toolholding 5 mm cutting width for narrow grooving Max plunge depth 20 mm for deep cuts Compatible with Korloy MGM 5 inserts Stable clamping for consistent groove geometry The holder delivers reliable clamping through a robust 25 mm clamping head, which reduces vibration and ensures consistent chip control during each cut. That stability translates into fewer rejects and less rework when producing grooves or parting components. With a 5 mm cutting width, the tool is optimised for narrow, precision grooves where dimensional accuracy matters; the narrow profile also reduces material drag and heat buildup at the cut edge. The combination of head stiffness and narrow cutting profile supports longer insert life and repeatable part cycles, improving shop throughput and process predictability. Engineered for right‑hand cutting and efficient setup Designed with a right-hand cutting direction, the toolholder matches conventional turning setups and minimises reorientation during CNC operations. The 25 mm cutting shank and a 45 mm cutting height provide a compact yet well-balanced assembly that sits securely in standard toolposts. The toolholder’s 0.713 kg mass gives a stable centre of gravity without overloading the turret. These attributes reduce setup time, allow quick indexing on multi‑station turrets and support tight production schedules by simplifying tool management and changeover procedures. Compatibility that reduces procurement and assembly effort Compatibility with Korloy MGM 5 inserts and an ISO-style designation (ISO 2525) makes the holder straightforward to spec into existing tooling arrays. The bores for toolpost mounting follow the 5C‑R (350–500) designation, facilitating integration with matched boring bars and bar holders. A maximum plunge capacity of 20 mm accommodates deeper cuts when required, while the overall length of 150 mm keeps the assembly compact for close‑quarter turning tasks. This pragmatic compatiblity lowers stocking complexity and helps maintain a consistent supply chain for inserts and spares across varied turning operations. Improve productivity with clear technical advantages Focusing on measurable benefits, the holder’s geometry supports improved chip evacuation and a repeatable cutting position, which together yield shorter cycle times and less scrap. The 25 mm head and narrow cutting width reduce tool deflection, enabling tighter tolerances on groove dimensions. For production environments aiming to standardise tooling without sacrificing flexibility, this clamp holder offers a balance of durability and precision that supports efficient batch production and single‑piece flows alike. For a dependable right‑hand parting solution compatible with Korloy MGM 5 inserts, contact Metav Werkzeuge in Emmerich for ordering and tailored specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D799-1TM Name: Parting tool holder Manufacturer: Teknik Makina Facts Clamping head width: 25 mm Cutting width: 5 mm Maximum plunge depth: 20 mm Cutting height: 45 mm Shank cutting length: 25 mm Overall length: 150 mm Weight: 0.713 kg Special features Compatible with Korloy MGM 5 inserts Right‑hand cutting direction ISO designation: 2525 Mounting bore: 5C‑R (350–500) SKU: D799-1TM FAQ Which inserts fit this holder best? The holder is compatible with Korloy MGM 5 inserts; the geometry is optimised for these insert types to ensure accurate seating and secure clamping. What is the maximum plunge depth for heavy grooving? Maximum plunge capacity is 20 mm, which allows deep grooving and parting operations within the specified limits of the parting tool holder. Is the holder suitable for right‑hand turning centres? Yes, the parting tool holder is designed for right‑hand cutting direction and integrates with standard right‑hand turning set‑ups. What are the key mounting designations to check before purchase? Check the ISO designation 2525 and the mounting bore 5C‑R (350–500) to ensure compatibility with existing toolposts and bar holders. How does the holder support repeatable precision? The combination of a 25 mm clamping head, a 5 mm cutting width and robust construction reduces deflection and vibration, supporting repeatable groove geometries with minimal rework. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid clamping solution that combines precise groove control with robust workshop durability — the 2 mm cutting width and 16 mm maximum grooving depth ensure clean parting operations while compatibility with Korloy 2C MGM inserts keeps tooling costs predictable; order or discuss technical matching with Metav Werkzeuge for a reliable supply chain. Stechklemmhalter D664TM – parting and grooving holder, 2 mm cutting width, right‑hand (Teknik Makina) The Stechklemmhalter D664TM is a right‑hand parting and grooving holder engineered for precision lathe work, offering a narrow 2 mm cutting width and a compact 150 mm overall length for constrained setups 2 mm cutting width for precision grooves and parting Max 16 mm grooving depth for deeper cuts Compatible with Korloy 2C MGM inserts 150 mm overall length with 25 mm head width Accurate groove control for productive turning The holder delivers precise material separation thanks to its 2 mm cutting width and 16 mm max depth, which together reduce chip load and improve surface finish during parting operations. The right‑hand cutting direction and stable geometry minimise deflection under cut, translating into higher first‑pass yield and fewer rework cycles. By focusing on controlled chip evacuation and reduced radial force, the tool supports consistent cycle times on repetitive turning tasks and contributes to measurable productivity gains in batch production. Tooling compatibility and clear set‑up advantages Compatibility with Korloy 2C MGM style inserts and the boreshaft designation 2C‑R MGM simplifies procurement and tool‑setting: common insert types and clamping screws fit this holder without bespoke adaptations. The 25 mm head width provides a rigid contact area for the insert, while the ISO 2525 designation indicates standardised shank and mount geometry for predictable machine interfacing. Together, these traits reduce set‑up time and lower the likelihood of incorrect insert selection, helping maintain throughput in mixed lots and multi‑operator workshops. Designed for reliable workshop use With an overall length of 150 mm and a mass of 0.726 kg, the clamp balances accessibility with stability for both manual and CNC lathes. The compact footprint suits confined turrets and short overhangs, decreasing vibration and tool chatter. A robust clamping mechanism ensures repeatable insert seating, which preserves edge life and reduces unexpected tool changes. These practical benefits support longer uninterrupted runs and more accurate batch conformity, making the holder a pragmatic choice for small to medium‑batch manufacturing. Practical benefits for maintenance and stock management The combination of common insert compatibility and standardised holder geometry reduces inventory complexity and simplifies spare stocking strategies. Shops can centralise on one set of inserts such as 2C MGM and keep fewer dedicated holders in reserve, lowering capital tied up in tooling while maintaining readiness for quick changeovers. The holder's simple mechanical concept also eases routine inspection and replacement of clamping screws, supporting steady machine availability and straightforward maintenance workflows. For technical advice, availability or to arrange procurement of the Teknik Cutting Tools parting holder via Metav Werkzeuge, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our consultants will assist with application matching and delivery options Technical data Article number: D664TM Manufacturer: Teknik Makina Product name: Stechklemmhalter D664TM Cutting direction: right Core dimensions Head width: 25 mm Cutting width: 2 mm Max. grooving depth: 16 mm Overall length: 150 mm Weight: 0.726 kg Features / Compatibility Compatible inserts: 2C MGM Suitable insert supplier: Korloy Shank / boring bar designation: 2C‑R MGM ISO designation: 2525 FAQ Which inserts fit this holder? The holder accepts 2C MGM type inserts; compatibility with Korloy 2C MGM is specified for the D664TM parting and grooving holder. Is the tool suitable for deep grooving? With a 16 mm maximum grooving depth, the holder supports deeper cuts than many compact parting tools while preserving rigidity for controlled machining. What machines is the holder intended for? The D664TM is suitable for conventional and CNC lathes where a right‑hand parting and grooving solution with a 150 mm overall length and 25 mm head is required. How does the clamping design affect performance? The robust clamping interface ensures repeatable insert seating, which helps maintain cutting edge stability and reduces vibration, extending insert life during serial production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 25 mm shank and a precise 2 mm cutting width for stable, narrow grooving plus a maximum 18 mm plunge depth for deeper operations; order the grooving toolholder directly via Metav Werkzeuge or consult the team for technical advice. Grooving clamp holder — right-hand grooving toolholder with 25 mm shank The Grooving clamp holder is a compact right-hand toolholder designed for precision grooving and parting with Sandvik-compatible indexable inserts. Right-hand cutting orientation 2 mm cutting width for narrow grooves 25 mm heavy-duty shank for stable clamping Compatible with Sandvik indexable inserts Precise narrow grooving with high rigidity The toolholder delivers repeatable narrow grooves thanks to a 2 mm cutting width and a robust cross-section. The 25 mm shank (height and width) increases rigidity at the toolpost, reducing chatter and improving surface finish. For production environments where dimensional consistency matters, the reduced tool deflection from the larger shank diameter supports tighter tolerances and more predictable cutting forces. This stability also extends insert life by preventing excessive vibration. Deeper plunges and dependable cutting orientation Engineered for controlled plunging, the holder allows a maximum plunge depth of 18 mm, enabling deeper grooving operations without compromising stability. The right-hand cutting orientation is optimised for standard lathe setups and predictable chip flow. The holder conforms to an ISO 2525 designation for straightforward integration in modular tooling systems and is supplied with a bar reference 2C-123 SDV-R for mounting compatibility. Workshop-ready dimensions and balanced handling With a 150 mm overall length and a mass of 0.732 kg, the holder provides a good balance between reach and rigidity. The compact length makes it suitable for confined setups while the weight helps dampen vibrations during cutting. Compatibility with Sandvik-compatible indexable inserts simplifies inventory and maintenance practices, as commonly stocked insert geometries can be used without adapting the clamping geometry. Practical clamping and operational benefits The clamping concept delivers secure insert retention and quick replacement cycles to keep machine downtime low. The holder’s dimensional harmonisation—25 x 25 mm shank and standard ISO reference—supports rapid tool changeover and predictable seating in the toolpost. In series production, this reduces set-up time and contributes to consistent batch quality, supporting a streamlined machining workflow while lowering the risk of scrap. For secure, high-precision grooving with Teknik Cutting Tools' reliable build quality, contact Metav Werkzeuge for ordering and technical advice by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: D902TM Manufacturer: Teknik Makina Product name: Stechklemmhalter Facts Overall length: 150 mm Shank height: 25 mm Shank width: 25 mm Cutting width: 2 mm Maximum plunge depth: 18 mm Weight: 0.732 kg Cutting direction: right-hand Special features Compatible with Sandvik indexable inserts ISO designation: 2525 Bar designation: 2C-123 SDV-R Compact grooving toolholder design FAQ What cutting direction does the holder use? The holder is configured for right-hand cutting and is described as a right-hand grooving toolholder (D902TM). Which insert standard fits this toolholder? The holder accepts Sandvik-compatible indexable inserts; it is designed for common insert geometries used in grooving operations. What is the maximum plunge depth for grooving? Maximum plunge depth is 18 mm for the D902TM grooving clamp holder, allowing for deeper groove profiles within the holder’s specified limits. What are the shank dimensions and why do they matter? The shank measures 25 mm in height and 25 mm in width; this larger cross-section enhances rigidity and reduces vibration during cutting. Which mounting or bar designation applies to this holder? The supplied bar designation is 2C-123 SDV-R, and the holder follows the ISO 2525 reference for reliable integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a dependable combination of secure clamping and precision cutting: the left-hand parting tool holder provides a 25 x 25 mm shank, a 2 mm cutting width and 16 mm maximum plunge depth for controlled parting operations — order directly via Metav Werkzeuge or consult our technical advisers for application-specific pairing. Parting tool holder D611TM by Teknik Makina (left-hand, 2 mm cutting width) A left-hand parting tool holder engineered for reliable parting and grooving on conventional and CNC lathes, compatible with Korloy 2C MGM inserts and built for stable chip control in confined cuts. Left-hand cutting direction 25 x 25 mm shank for stable clamping 2 mm cutting width, 16 mm plunge capacity Compatible with Korloy 2C MGM inserts Stable shank and precise cutting for dependable parting The robust 25 x 25 mm shank and a total length of 150 mm form a rigid mounting platform that reduces vibration during parting. Reduced vibration translates into better surface quality and longer insert life, so the cutting process becomes more predictable. The relatively low mass of 0.726 kg combines stiffness with manageable handling for quick tool changes and secure seating in standard tool posts. The ISO designation 2525 indicates standardised dimensions that simplify inventory and replacement planning. Compatibility and practical efficiency on the shop floor Designed for use with Korloy 2C MGM indexable inserts (designation 2C-L MGM), the clamping geometry ensures positive seating and repeatable positioning of the insert. A cutting width of 2 mm together with a maximum plunge depth of 16 mm is optimal for fine parting and grooving tasks where material saving and component integrity matter. Choosing matching inserts and feeds significantly increases productivity; the combination of the holder’s rigidity and the correct insert lets operators achieve consistent cycle times and minimise rework. Installation, handling and operational advantages The unit’s left-hand cutting orientation is specified at manufacture, eliminating ambiguity during setup and ensuring correct chip flow for left-handed operations. The clamp design secures the insert with a compact footprint, enabling use in tight overhangs and close-tolerance turning fixtures. Clear ISO sizing and the compatible insert family simplify procurement and reduce downtime caused by searching for matching components. Routine exchange of inserts and adjustment of the clamping screw are straightforward, supporting fast changeovers in batch production. Contact Metav Werkzeuge for tailored advice on the Teknik Cutting Tools parting tool holder D611TM and to discuss the optimal Korloy insert pairing for the intended materials and cycle times Technical Data Article number: D611TM Manufacturer: Teknik Makina SKU: D611TM ECLASS: 21181005 Facts Shank height: 25 mm Shank width: 25 mm Cutting width: 2 mm Max plunge depth: 16 mm Overall length: 150 mm Weight: 0.726 kg Cutting direction: left Special features ISO designation: 2525 Compatible inserts: Korloy 2C MGM Toolholder designation: 2C-L MGM Application: parting and grooving operations FAQ Which inserts fit this holder? The holder accepts Korloy 2C MGM indexable inserts; the bohrstange designation is 2C-L MGM for straightforward compatibility. What is the maximum cutting depth? Maximum plunge capacity is 16 mm, suitable for common parting and grooving depths in general turning applications. Is the holder left- or right-handed? This tool is manufactured for left-hand cutting direction and should be mounted accordingly for correct chip evacuation. What are the shank dimensions and why do they matter? The shank measures 25 x 25 mm, providing a stiff mounting base that reduces vibration and improves finish and insert life. Can it be used on CNC lathes as well as conventional lathes? Yes, the rigid design and standard ISO sizing make it suitable for both conventional and CNC turning centres when the left-hand orientation is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact performance and controlled chip evacuation make this clamping solution ideal for repetitive parting and grooving tasks; combine 2 mm cutting width and a 25 x 25 mm shank for stable machining and straightforward tool changes — order via Metav Werkzeuge or consult our specialists for application guidance. Stechklemmhalter — Teknik Makina parting and grooving clamp holder with 2 mm cutting width and 25 x 25 mm shank Stechklemmhalter is a compact parting and grooving toolholder designed for lathe operations where repeatability and secure clamping are essential. Compatible with 2C DGM 2 inserts 2 mm cutting width for narrow grooves Max parting depth 17 mm 25 x 25 mm compact shank Precision clamp for consistent parting results This turning toolholder delivers predictable groove geometry and repeatable parting performance through rigid clamping and a narrow blade profile. The holder accepts the common 2C DGM 2 indexable inserts; that interface, combined with the 2 mm cutting width, reduces material waste and minimises secondary finishing. For workshops aiming to maintain cycle-time stability on medium-duty turning centres, the proven interface and clear dimensional data support process planning and quality control. Compact design for stable reach and reduced vibration An overall length of 150 mm and a compact 25 x 25 mm shank balance accessibility with stiffness, helping to suppress chatter and improve surface finish in groove and parting cuts. At 0.739 kg, the holder offers a manageable mass that reduces toolpost load while preserving rigidity; this balance shortens setup and tool-change times and supports consistent tool life. The compact dimensions also ease storage and inventory management within a controlled tooling system. Seamless insert integration for efficient setup Compatibility with TNGLY‑OKE and the designation ISO 2525 simplifies procurement and ensures correct seating of the insert on the clamping face. The holder accepts the matching bores for the bohrstange reference 2C‑DGM 2, so insert fitment is straightforward and clamping torque requirements are predictable. The toolholder’s parting capacity — a maximum 17 mm cutting depth — is suitable for a broad range of medium-depth operations, reducing the need for multiple specialised holders and streamlining tooling lists for production runs. For tailored advice on application suitability or to reserve stock of the Teknik Makina holder, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for a technical consultation and reliable supply. Technical Data Article number: D845TM Manufacturer: Teknik Makina Product name: Stechklemmhalter Core technical data Overall length: 150 mm Shank height: 25 mm Shank width: 25 mm Cutting head width: 25 mm Cutting width: 2 mm Max parting depth: 17 mm Weight: 0.739 kg ISO designation: 2525 Special features Suitable for indexable inserts 2C DGM 2 Compatible with TNGLY-OKE insert range Bohrstange reference 2C-DGM 2 Parting and grooving toolholder configuration FAQ Which inserts fit this holder? The holder accepts 2C DGM 2 indexable inserts; compatibility with TNGLY‑OKE inserts follows the ISO 2525 seating and ensures correct clamping for reliable cutting. On which lathes can it be used? This parting and grooving holder is intended for lathes that accept a 25 x 25 mm tool shank and are set up for indexable insert machining; the compact footprint suits medium-duty turning applications. What is the maximum cutting depth? The maximum parting depth is 17 mm, enabling a range of medium-depth grooving and cut‑off tasks without the need for alternative specialised holders. How is the insert secured and referenced? The insert seats against the machined reference faces and is secured using the clamping geometry specified for the 2C DGM 2 system; the matching bohrstange designation 2C-DGM 2 facilitates correct alignment. Does the weight affect toolholder balance? With a mass of 0.739 kg and an overall length of 150 mm, the holder offers a balance between rigidity and manageable toolpost loading, supporting stable machining and simple handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-precision clamp that combines reliable compatibility with Sandvik indexable inserts, a narrow 3 mm cutting width and a 25 mm clamping height to improve throughput in constrained turning and grooving operations; order directly via Metav Werkzeuge or consult the team for application advice. Parting tool holder D906TM — right-hand, 3 mm cutting width (Teknik Makina) The Parting tool holder D906TM is a right-hand clamping tool engineered for precise parting-off and grooving tasks in workshop and light industrial turning applications. Right-hand cutting direction 3 mm cutting width for narrow grooves Max plunging depth 20 mm Compatible with Sandvik indexable inserts Increased throughput with narrow cutting capability The holder’s 3 mm cutting width and dedicated right-hand geometry enable efficient, repeatable parting and grooving cycles, particularly where space or stock preservation is critical. The compact design focuses material removal into a controlled kerf, reducing cycle time and minimising waste without sacrificing stability. Operators benefit from predictable chip flow when matching the holder with appropriate indexable inserts, which in turn supports more consistent surface finishes and fewer rework cycles. Secure clamping and dimensional stability for reliable results A 25 mm clamping height combined with a 25 mm head width gives a rigid interface between insert and tool body, improving resistance to vibration during intermittent cuts. The integrated clamping arrangement suits standard indexable inserts from Sandvik, ensuring repeatable seat location and quick insert changes. With an overall length of 150 mm and a mass of 0.713 kg, the unit balances reach and stability for off-centre or confined operations, easing set-up and retention under cutting loads. Straightforward integration into existing toolposts and holders The shank designation 3C-123 SDV-R and ISO reference 2525 indicate compatibility with common turning tool systems, which simplifies replacement planning and toolholder inventory management. The right-hand orientation is encoded into the geometry to match directional feeds and machine set-ups, reducing the risk of incorrect mounting. This clarity supports faster machine changeovers and a lower learning curve for workshop staff when introducing the holder into production. Where this holder delivers most value The design is particularly suited to short-run production, prototype turning and repair work where tight grooves and controlled parting are required. Its combination of narrow cutting width and robust clamping makes it a pragmatic choice for applications that demand precision without complex fixtures. For operations using Sandvik-style indexable inserts, the holder provides a cost-effective route to enhanced process reliability and less downtime from insert changes. Speak to Metav Werkzeuge for tailored technical advice on the Teknik Makina D906TM and arrange prompt supply from our Emmerich stock. Technical data Article number: D906TM Manufacturer: Teknik Makina Designation: Parting tool holder Facts Overall length: 150 mm Clamping height: 25 mm Head width: 25 mm Cutting width: 3 mm Max plunge depth: 20 mm Weight: 0.713 kg Cutting direction: right Special features Compatible with Sandvik indexable inserts ISO designation: 2525 Shank designation: 3C-123 SDV-R FAQ What cutting direction is the holder designed for? The holder is configured for a right-hand cutting direction; the Teknik Makina D906TM is therefore intended for operations with feed and tool rotation set for right-hand parting. Which insert systems fit this toolholder? Compatibility is specified for Sandvik indexable inserts; the clamping geometry and ISO reference align with commonly used Sandvik standards. What is the maximum plunging depth for the holder? The maximum plunge depth is 20 mm, permitting controlled axial engagement when parting or grooving. How compact is the holder for confined applications? With an overall length of 150 mm and a weight of 0.713 kg, the holder offers a compact footprint suited to restricted toolpost spaces. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precision parting with a rigid clamping design, a 3 mm cutting width and a 20 mm maximum plunge depth for consistent, controllable cuts; the compact 150 mm overall length keeps the tool accessible in tight set-ups. Order or request advice directly from Metav Werkzeuge for quick delivery and application support. Parting clamping holder D850TM — 3 mm cutting width, ISO 2525 holder (Teknik Makina) The parting clamping holder D850TM from Teknik Makina is designed for secure clamping of indexable inserts and precise parting and grooving operations on lathes Rigid clamping for stable cutting 3 mm cutting width for narrow grooving 150 mm overall length for good reach Compatible with 3C DGM 3 inserts Consistent parting with compact, measurable geometry The holder delivers consistent results because its dimensions are optimised for control: an overall length of 150 mm, a holder height and width of 25 mm each and a precise 3 mm cutting width. These values translate directly into predictable chip formation and stable cutting conditions when mounted in the turret or toolpost. For users less familiar with tooling data, the small cutting width is ideal for fine parting operations where material loss must be minimised, while the even cross-section improves rigidity under load. The specified figures serve as a reliable baseline for process planning and fixture setup. Secure clamping and quick insert compatibility A strong benefit of this design is the emphasis on secure clamping: the tool accepts the 3C DGM 3 indexable inserts and follows the ISO 2525 holder geometry for repeatable seating and clamping. The shank/shank-bar designation 3C-DGM 3 indicates the matched connection for the bar or adapter; this ensures that insert changes and re‑clamping are straightforward and repeatable. Because the insert type and holder interface are standardised, tool changeovers are faster and less error-prone, supporting uptime and predictable cycle times on production lathes. Practical reach and cutting depth for routine turning tasks With a maximum plunge depth of 20 mm, the tool is suitable for many standard parting and grooving tasks without overextending the toolholder. The compact footprint — 25 mm across the head and body — reduces interference in multi-tool setups and supports close-tool applications on multi-spindle or small-batch turning centres. The tool’s moderate weight of 0.74 kg contributes to easy handling during setup and to stable behaviour during cutting, particularly when combined with a correctly adjusted turret or toolpost clamp. Designed for workshop efficiency and reliable inventory integration Specification clarity makes this holder straightforward to specify across procurement and production: the ISO designation and the clear compatibility with TNGLY-OKE / 3C DGM 3 inserts reduce uncertainty when consolidating tooling lists. The geometrical data provided can be used directly in tooling databases and CAM setups, supporting efficient spare-part management. For shops aiming to simplify supplier lists while keeping process reliability, the D850TM’s standard interfaces mean fewer bespoke adaptors and less downtime for matching parts. Discuss Teknik Cutting Tools' D850TM with Metav Werkzeuge for tailored application advice and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D850TM Manufacturer: Teknik Makina ISO designation: 2525 Compatible inserts: 3C DGM 3 (TNGLY-OKE) Core specifications Overall length: 150 mm Holder height: 25 mm Head/cutting‑head width: 25 mm Holder width: 25 mm Cutting width: 3 mm Maximum plunge depth: 20 mm Weight: 0.74 kg Designs / Special features Shank designation: 3C-DGM 3 For indexable inserts Compatible with TNGLY-OKE insert range ISO 2525 compliant holder geometry FAQ What insert types fit this holder? The D850TM accepts 3C DGM 3 indexable inserts and is specified for TNGLY-OKE style inserts; this standard compatibility ensures proper seating and clamping. What is the maximum cutting depth for parting operations? A maximum plunge depth of 20 mm is specified for the holder, providing guidance for safe parting and grooving limits in routine turning tasks. Which ISO designation applies to the holder interface? The holder follows ISO 2525, which helps ensure repeatable clamping and interchangeability with matching insert and bar systems. Is the holder suitable for tight toolgroup arrangements? Yes — the compact 25 mm cross section and 150 mm overall length make the holder suited to close‑packed turret or toolpost configurations, reducing the risk of interference. How heavy is the tool for handling and setup considerations? The unit weighs 0.74 kg, a manageable mass that aids stable clamping while remaining easy to handle during tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid holder that combines stable clamping with narrow cutting capability for efficient parting cycles; order directly via Metav Werkzeuge or consult our advisors for application support. Teknik Makina D615TM parting tool holder — left‑hand orientation, 3 mm cutting width A Teknik Makina D615TM parting tool holder designed for precision parting and grooving on CNC lathes, providing rigid shank support for controlled cuts and repeatable results Left‑hand cutting orientation 3 mm cutting width for narrow parting Max parting depth 18 mm Shank 25 × 25 mm for rigid clamping Compatible with Korloy 3C MGM inserts Rigidity and repeatability for shorter cycle times The D615TM is built around a 25 × 25 mm shank and a compact body that reduces deflection during cutting. This rigidity translates into more consistent parting, fewer rejects and shorter finishing passes. The holder’s mass (approx. 0.75 kg) helps damp vibrations, supporting cleaner cuts when using a single‑edged parting insert. For production environments where repeatability matters, the combination of a sturdy clamping geometry and measured mass means fewer tool adjustments between batches and less machine downtime. Controlled cutting for minimal material waste With a cutting width of 3 mm and a maximum cutting depth of 18 mm, the holder is optimised for narrow parting and grooving operations. The left‑hand orientation ensures correct cutting direction for left‑side parting applications and reduces the likelihood of rubbing or chip re‑engagement. Using compatible inserts such as Korloy 3C MGM provides predictable chip formation and improved surface integrity; choosing the correct insert grade and geometry will further reduce cycle times and extend tool life, delivering a clear cost‑benefit over repeated re‑machining. Simple integration and shop‑floor serviceability Measuring 150 mm overall length and carrying an ISO designation of 2525, the holder integrates easily with standard tool posts and boring bars such as the design referenced by 3C‑L MGM. Its clamping concept allows straightforward insert changes and secure locking without complex fixtures, which speeds up set‑up and reduces operator error. For workshops seeking to centralise tooling needs, the holder’s compatibility with established inserts simplifies stocking and ensures rapid replacement during scheduled maintenance. Contact Metav Werkzeuge for tailored advice and to arrange supply of the Teknik Makina D615TM parting tool holder — call +49 2822 7131930 or email info@metav-werkzeuge.com for technical matching and order assistance Technical Data Article number: D615TM Manufacturer: Teknik Makina Product type: Parting tool holder Compatible inserts: 3C MGM Suitable insert manufacturer: Korloy ISO designation: 2525 Facts Shank height: 25 mm Shank width: 25 mm Cutting width: 3 mm Max parting depth: 18 mm Overall length: 150 mm Weight: 0.75 kg Design / Features Left‑hand cutting orientation Compatible with 3C‑L MGM boring bar designation Compact profile for rigid clamping Intended for parting and grooving operations Secure insert clamping for repeatable positioning FAQ Which insert types fit this holder? The holder is compatible with 3C MGM insert format; it is commonly used with Korloy 3C MGM inserts for reliable seating and chip control. What does left‑hand cutting orientation mean? Left‑hand orientation means the cutting edge engages the workpiece when the tool approaches from the left side; the D615TM is designed accordingly to ensure correct cut direction and secure chip flow. What maximum depth of cut is possible with this holder? The parting depth is limited to 18 mm with this holder; deeper operations require a different tool concept or stepped machining strategies. Is the holder suitable for high‑speed parting? The compact shank and secure clamping provide good stability for routine parting; optimal speeds depend on insert grade and workpiece material, so consult insert data for recommended cutting parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 3 mm parting width, a 17 mm maximum plunge depth and a compact 150 mm overall length for consistent lathe productivity; order the parting and grooving tool holder directly via Metav Werkzeuge or contact our consultants for application advice. Parting and grooving tool holder D784TM — right-hand, 3 mm cutting width by Teknik Makina The parting and grooving tool holder D784TM is a right-hand clamping holder engineered for accurate parting and grooving tasks on lathes, suited to metric inserts and short overhang turning requirements Right-hand cutting direction 3 mm cutting edge width Fits Korloy MGM 3 inserts 150 mm overall length Precise parting performance with controlled plunge The holder delivers reliable parting and grooving through a finely specified 3 mm cutting edge width and a controlled maximum plunge of 17 mm, enabling repeatable groove profiles and reduced rework. Its geometry is optimised for short overhang operations, which lowers bending moments and vibration; this translates into cleaner chip formation and longer insert life. The tool’s maximum cutting diameter of 110 mm and a cutting height of 40 mm support a wide range of turning tasks while maintaining the accuracy expected in production environments. Proven compatibility for easy integration Designed for straightforward integration into existing tool setups, the D784TM accepts Korloy MGM 3 inserts and matches a standard ISO 2525 mounting interface. The clamping head width of 25 mm and the designated shank configuration 3C‑R (80–110) simplify selection of compatible boring bars and tool posts. This compatibility reduces adjustment time at the machine and makes the holder suitable for both single‑piece and small‑batch production where fast changeover is important. Robust dimensions for stable operation With an overall length of 150 mm and a measured weight of 0.72 kg, the holder provides a balanced combination of rigidity and manageable mass for rapid lathe cycles. The 25 mm head height and 25 mm head width give a stable clamping platform that resists deflection during plunge operations. These dimensions contribute to consistent cutting behaviour and predictable tool life, which supports efficient shopfloor planning and reduces unscheduled downtime. Practical workshop advantages and setup clarity The parting tool holder’s straightforward design shortens setup procedures: the 3 mm cutting width and clear dimensional data make insert selection and tool alignment quicker. For workshops seeking to consolidate tooling, the holder’s combination of ISO 2525 designation and Korloy insert compatibility helps standardise tool inventories. Documentation and repeatability benefit from this standardisation, enabling smoother production runs and simpler spare‑part management without sacrificing cutting performance. Contact Metav Werkzeuge for a technical check of fitment and to confirm suitability for existing tool posts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: D784TM Manufacturer: Teknik Makina SKU: D784TM Dimensions & performance Overall length: 150 mm Maximum cutting diameter: 110 mm Cutting edge width: 3 mm Maximum plunge depth: 17 mm Cutting height: 40 mm Head/shank cutting length: 25 mm Head width: 25 mm Head height: 25 mm Weight: 0.72 kg Diameter: 80 mm Bore bar designation: 3C-R (80-110) Compatibility & special features Compatible with Korloy inserts For MGM 3 insert type ISO designation: 2525 Right-hand cutting direction Application: parting and grooving FAQ Which insert types fit the holder? The holder accepts Korloy MGM 3 inserts; the clamping geometry is specified for this insert family and compatible grades. What is the maximum cutting depth for plunge operations? Maximum plunge depth is 17 mm, specified for secure parting performance without compromising stability. Is the holder right- or left-hand oriented? This model is designed for right-hand cutting direction, suitable for common lathe setups. What overall length and weight can be expected? Overall length is 150 mm and weight is 0.72 kg, balancing rigidity and manageable mass for rapid cycles. Which mounting standard does the clamping interface follow? The holder uses an ISO 2525 designation and matches standard mounts for straightforward integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping, precise 3 mm parting width and compatibility with ISCAR 3C GRP inserts for reliable, vibration‑reduced turning operations; the compact 150 mm length also eases fitment in standard tool posts. Order the parting tool holder D769TM directly via Metav Werkzeuge or ask our consultants if needed. Parting Tool Holder D769TM — Right‑hand parting holder with 25 mm clamp (Teknik Makina) Parting Tool Holder D769TM is a right‑hand, ISO‑style holder designed for precision parting and grooving in lathe applications, compatible with 3C GRP indexable inserts. 25 mm clamping width Compatible with 3C GRP inserts 3 mm parting blade width Right‑hand orientation, 150 mm length Stable clamping for vibration‑free cuts The holder's 25 mm clamping width and solid construction provide a stable platform that reduces chatter during parting and grooving. Stability translates into longer insert life and improved surface quality; a secure clamp prevents micro‑movements that otherwise generate heat and accelerate wear. For shop floors where repeatability matters, the robust clamp geometry supports consistent cut depths and keeps tool offsets predictable, enabling faster set‑up and fewer scrapped parts. Precise parting performance for narrow grooves With a 3 mm cutting width and a maximum cutting depth of 18 mm, the design suits fine parting and narrow grooving tasks where accuracy is required. The narrow blade profile cuts material efficiently while minimising material removal, which reduces cycle time on small‑diameter work. For those less familiar with turning terminology: the cutting width denotes the width of the part being removed in one pass, so a 3 mm blade is ideal for controlled, precise separations without compromising component integrity. Compatibility and modular sourcing for production efficiency The tool holder accommodates 3C GRP style indexable inserts and is specified for use with ISCAR‑type inserts, making replacement and stocking straightforward. The holder's ISO 2525 designation ensures a standardised interface to broaching bars and tool posts common in industrial workshops, simplifying procurement and reducing lead times. Using standard inserts and interfaces lowers tooling complexity and helps maintain a lean inventory without sacrificing performance. Compact length and ergonomic handling At a total length of 150 mm and weighing approximately 0.755 kg, the holder is compact enough for tight tool post arrangements while providing sufficient overhang for deep cuts when aligned correctly. The right‑hand orientation is suited to conventional turning set‑ups; the balanced mass assists in mounting and reduces the likelihood of toolpost interference during multi‑tool operations. In practice, this results in quicker changeovers and a tidier machine layout. For procurement or technical clarification regarding the Teknik Makina D769TM holder, contact Metav Werkzeuge for personalised advice and reliable delivery from Emmerich. Technical Data Article number: D769TM Name: Stechklemmhalter (parting tool holder) Brand: Teknik Makina Compatible inserts: 3C GRP (ISCAR) Facts Clamping width: 25 mm Cutting head width: 25 mm Cutting width (parting): 3 mm Maximum parting depth: 18 mm Total length: 150 mm Weight: 0.755 kg Orientation: right (right‑hand) ISO designation: 2525 Special features Suitable for 3C GRP indexable inserts ISCAR compatible insert format Compact 150 mm overall length for standard tool posts FAQ What insert type fits this holder? The D769TM accepts 3C GRP style indexable inserts and is specified to match ISCAR insert geometries for straightforward replacement. Is the holder suitable for deep parting operations? The holder supports a maximum parting depth of 18 mm, which is adequate for many through‑parting and grooving tasks; deeper cuts may require staged machining or alternative tooling. Which orientation is the tool designed for? This model is configured as a right‑hand parting tool holder, intended for standard right‑hand turning directions on lathes. How does the clamp width affect machining stability? The 25 mm clamping width increases rigidity at the insert seat, reducing vibration and improving insert life and surface finish during parting operations. Can the holder be used with different tool posts? The holder follows an ISO 2525 interface convention, easing integration with common tool posts and broaching bar setups found in industrial workshops. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable right-hand parting performance with a 3 mm cutting width and 40 mm maximum parting depth delivers precise parting-off and reduced setup times; order directly via Metav Werkzeuge or contact our consultants for compatibility support. Parting clamp holder D960TM — right-hand, 3 mm cutting width (Teknik Makina) A Parting clamp holder D960TM for Korloy 3C MGM indexable inserts, engineered for right-hand parting and grooving on lathes. Right-hand parting orientation 3 mm precise cutting width 25 mm cutting head width 150 mm overall length Accuracy that keeps production steady The D960TM holder provides a compact, dependable solution for turning shops that require consistent parting and grooving. With a 3 mm cutting width and a 25 mm cutting head, the holder is designed to support fine, reproducible cuts while maintaining chip control. The ISO 2525 designation indicates a standardised interface for toolholding, which helps simplify tool selection and reduces changeover errors. Because the holder is configured for right-hand machining, it suits conventional lathe set-ups where material removal direction follows standard turning flows. The combination of these technical specifications directly supports higher first-pass accuracy and fewer reworks. Designed for straightforward integration and quick maintenance Integration into existing tooling systems is straightforward: the holder is compatible with Korloy 3C MGM indexable inserts and matches the 3C-R MGM boring bar designation for mounting. At 150 mm overall length and a mass of 0.722 kg, the unit balances rigidity with manageable handling during set-up. The clamping mechanism secures the insert reliably to reduce micro-movements that can degrade edge life; this leads to longer insert performance and lower tool-change frequency. For workshops with mixed-brand tooling, the ISO alignment and the Korloy compatibility reduce the need for bespoke adapters and shorten downtime during changeovers. Practical applications and operational benefits This toolholder is intended for precise parting-off and narrow-grooving tasks where controlled chip evacuation and repeatability matter. The 40 mm maximum parting depth accommodates most stepped and through-part features encountered in general machining, while the slender cutting width allows narrow kerf finishes and conserves material. In everyday use, the holder supports efficient batch production and one-off jobs alike, by offering steady clamping and a predictable cutting geometry. For procurement and workshop planning, the holder’s standardised interface and Korloy compatibility make it a pragmatic choice for workshops seeking reliable, repeatable results without complex retooling. For procurement or technical clarification on Teknik Makina's D960TM parting clamp holder, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and order options. Technical data Article number: D960TM Manufacturer: Teknik Makina ISO designation: 2525 Facts Overall length: 150 mm Weight: 0.722 kg Cutting head width: 25 mm Cutting width: 3 mm Maximum parting depth: 40 mm Cutting direction: right Special features Compatible with Korloy 3C MGM indexable inserts Compatible with 3C-R MGM boring bar designation Right-hand parting and grooving application Standardised ISO 2525 interface FAQ Which inserts fit this holder? The holder is designed for Korloy 3C MGM indexable inserts; matching insert geometry ensures secure clamping and correct cutting angles for the D960TM parting clamp holder. Is the tool suitable for left-hand machining? No, the D960TM is configured for right-hand cutting; left-hand operations require the corresponding left-hand holder or an alternative configuration. What is the maximum parting depth for this holder? The maximum parting depth is 40 mm, which accommodates most through-part and stepped parting operations encountered in workshop practice. How long is the toolholder and how heavy is it? The overall length is 150 mm and the weight is 0.722 kg, offering a balance of rigidity and ease of handling during set-up. Which standard designations apply to this holder? The holder uses the ISO 2525 interface designation and is compatible with the 3C-R MGM boring bar specification for mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise right-hand parting with a 3 mm cutting width and Horn-compatible clamping; the compact 150 mm overall length and 22 mm maximum plunge depth provide flexible set-up options for small-batch and series work. Order the tool directly via Metav Werkzeuge or ask our consultants for application advice. D690TM Parting Toolholder by Teknik Makina — right-hand, 3 mm cutting width A D690TM parting toolholder designed for secure clamping of indexable inserts in right-hand parting applications, suitable for constrained toolposts and precise plunge cuts Right-hand cutting orientation 3 mm cutting width for fine parting Max plunge depth 22 mm for deeper cuts 150 mm overall length for compact set-ups Compatible with Horn indexable inserts Precise clamping and compact design for stable parting The toolholder combines a rigid clamping head with compact dimensions to deliver consistent repeatability in parting operations. With a 25 mm head width and height, the holder is engineered to resist vibration when used with indexable inserts, which minimises tool chatter and extends insert life. The right-hand cutting orientation is specified for conventional lathe set-ups and was chosen to match common turning routines, while the modest mass of 0.7 kg supports quick tool changes without compromising stability. Efficient cut control and deeper plunge capability A defined 3 mm cutting width and a maximum plunge depth of 22 mm allow controlled chip formation and predictable forces at the cutting edge. Because plunge depth is limited and clearly specified, process planning is simplified and toolpath strategies can be adjusted for improved cycle times. The 150 mm overall length reduces overhang, which helps to lower deflection and supports more accurate parting on thin-walled components or when working close to shoulders. Compatibility and practical advantages for workshop use Designed to accept Horn-standard indexable inserts and identified with ISO designation 2525, the toolholder integrates seamlessly into existing tooling systems, reducing the need for special adapters. The bar reference 3C-R S229 allows straightforward identification for reordering and inventory control. For workshops and contract manufacturers, this compatibility translates to less tooling complexity and faster set-ups, while the right-hand configuration suits common machine orientations and existing clamping strategies. For reliable, Horn-compatible parting operations with the Teknik Makina D690TM, contact Metav Werkzeuge for personalised application guidance and supply directly from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D690TM Manufacturer: Teknik Makina Product: Parting toolholder Cutting direction: right Dimensions & weight Overall length: 150 mm Holder width: 25 mm Head width: 25 mm Holder height: 25 mm Cutting width: 3 mm Max plunge depth: 22 mm Weight: 0.7 kg Compatibility & fitting Compatible with Horn indexable inserts ISO designation: 2525 Compatible bar: 3C-R S229 Right-hand cutting FAQ Which inserts fit this toolholder? The D690TM parting toolholder is designed for Horn-compatible indexable inserts; the ISO designation 2525 and bar reference 3C-R S229 aid selection. Is the D690TM suitable for deep grooving or parting? The toolholder supports a maximum plunge depth of 22 mm, which permits deeper parting operations within the stated limit. What are the key dimensions to check for toolpost clearance? Check the overall length of 150 mm and the holder head dimensions (25 mm width and height) to ensure clearance on the lathe toolpost. Can the toolholder be used for thin-walled components? Yes, the compact length and reduced overhang help to lower deflection, making the holder appropriate for controlled parting on thin-walled parts. How does the right-hand cutting orientation affect set-up? Right-hand cutting is matched to standard lathe orientations; the D690TM was specified for conventional setups to simplify tool alignment and programming. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of stable clamping, Korloy 4C MGM compatibility and a 4 mm cutting width for reliable parting cycles; order directly via Metav Werkzeuge or consult the technical team for application support. Stechklemmhalter — parting toolholder with 25 mm head and right-hand cut by Teknik Makina Stechklemmhalter configured as a precision parting toolholder for turning operations, compatible with Korloy 4C MGM inserts and designed for reliable right-hand cutting in standard lathe toolposts 25 mm cutting-head width for stable clamping Compatible with Korloy 4C MGM inserts 4 mm cutting width for precise parting ISO 2525 shank, 150 mm overall length Consistent parting performance with defined geometry The compact parting toolholder delivers repeatable cuts through a defined 25 mm cutting-head and a narrow 4 mm cutting width, features that combine to reduce cutting forces and improve surface finish. Given the right-hand cutting orientation and the ISO-compliant shank, the holder is suited to production environments requiring quick changeovers between rough and finish passes. The design supports stable insert seating and predictable chip control, which helps to maintain cycle times and reduce scrap rates in routine turning and cut-off tasks. Fast changeovers and standardised compatibility Interchangeability with Korloy 4C MGM inserts and the ISO 2525 shank designation simplifies tooling logistics on the shop floor. The shank identification 4C‑R MGM enables secure mounting in commonly used lathe toolposts, while the overall length of 150 mm gives an accessible reach without excessive overhang. These measured attributes minimise set-up time and support a consistent tool life plan: inventory can be standardised around the same insert family, reducing downtime for insert changes and re‑indexing. Designed for reliability, handling and process stability Weighing 0.727 kg, the holder balances rigidity with manageable handling during tool changes and maintenance. The maximum plunge depth of 18 mm offers defined machining limits for safe parting operations on medium-duty workpieces. Manufactured by Teknik Makina to industry specifications, the component is optimised for secure clamping and repeatable alignment, contributing to predictable process behaviour and reduced machining variance in series production. For secure supply and application guidance on the Teknik Makina parting toolholder D678TM, contact Metav Werkzeuge in Emmerich — technical advice and local logistics are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: D678TM Manufacturer: Teknik Makina Product: Parting toolholder Overall length: 150 mm Weight: 0.727 kg Cutting-head width: 25 mm Cutting width: 4 mm Max plunge depth: 18 mm Compatible inserts: Korloy 4C MGM ISO designation: 2525 Shank designation: 4C-R MGM Cutting direction: Right Numbers / Core technical data Overall length: 150 mm Weight: 0.727 kg Cutting-head width: 25 mm Cutting width: 4 mm Max plunge depth: 18 mm Design / Special features Compatibility with Korloy 4C MGM inserts ISO 2525 shank Shank type: 4C-R MGM Right-hand cutting orientation Application: parting and grooving operations FAQ What inserts fit this holder? The D678TM accepts Korloy 4C MGM style inserts; compatibility ensures standardised insert stocking and simple replacements. What is the maximum plunge depth for cutting? The parting toolholder provides a maximum plunge depth of 18 mm, defining the safe limit for deep cut-off operations. Which cutting direction is supported? This toolholder is configured for right-hand cutting applications and must be mounted accordingly for correct chip flow and tool performance. What shank and mounting designation does it use? The design follows ISO 2525 with a shank designation of 4C‑R MGM, allowing mounting in toolposts and holders that accept that shank style. Is the holder suitable for production changeovers? Yes — the combination of standardised shank, insert compatibility and a modest 150 mm overall length supports rapid changeovers and predictable balancing in series work. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready solution that combines stable clamping, narrow parting capability and compatibility with Horn indexable inserts; order directly via Metav Werkzeuge or consult our specialists for application advice. Parting tool holder – right-hand, 25 mm clamp height (Teknik Makina) Parting tool holder designed for right-hand grooving and parting operations in turning applications, offering a compact 150 mm overall length and standard ISO 2525 interface for easy integration Right-hand cutting orientation 25 mm clamping height for stable support 4 mm cutting width for narrow parting cuts Compatible with Horn indexable inserts Stable clamping for repeatable parting quality A robust clamping geometry ensures reliable tool support: the 25 mm clamping height and matching 25 mm head width reduce tool deflection during parting cycles. This stability translates into more consistent groove widths and longer insert life, so setup times and scrap rates are reduced. The design is optimised for standard tool posts and is intended to be used where a predictable, vibration‑minimised cut is required. Designed for precise, efficient narrow cuts The holder accepts a narrow cutting edge of 4 mm and allows a maximum parting depth of 18 mm, which is ideal for fine part separation and grooving without excess material removal. The right‑hand cutting direction supports conventional turning setups and enables controlled chip formation. By matching the holder geometry to the insert profile, heat build‑up is limited and insert wear is managed, improving process economy on repetitive production runs. Workshop compatibility and easy handling With a compact 150 mm overall length and a weight of 0.737 kg, the unit is easy to handle on the shop floor and fits into standard setups. The holder uses the ISO 2525 designation and is compatible with Horn indexable inserts and the shank designation 4C‑R S224, allowing straightforward interchangeability with many existing tool systems. The compact footprint aids accessibility in tight toolpost arrangements and supports quick replacement and inspection routines. Contact Metav Werkzeuge for tailored advice on Teknik Makina parting holders and to discuss the right configuration for specific turning tasks — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: D707TM Manufacturer: Teknik Makina Clamping height: 25 mm Head width: 25 mm Holder width: 25 mm Cutting width: 4 mm Max parting depth: 18 mm Overall length: 150 mm Weight: 0.737 kg Cutting direction: right ISO designation: 2525 Compatible insert maker: Horn Shank / bar designation: 4C-R S224 Application: parting / grooving for turning FAQ What cutting direction does this holder support? The parting holder from Teknik Makina (SKU D707TM) is configured for right‑hand cutting, suitable for standard lathe setups that use conventional tool orientation. Which insert types are compatible with this holder? Compatibility is specified for Horn indexable inserts; the holder is designed to accept Horn‑type plates in the fitting size listed and to interface with common insert geometries for parting. How deep can this holder cut in a single pass? The holder is rated for a maximum parting depth of 18 mm, enabling controlled separation in many turning tasks while maintaining stability and insert life. Is the holder suitable for compact toolposts and tight spaces? Yes. With an overall length of 150 mm and a weight of 0.737 kg, the holder is compact and intended for accessibility in constrained toolpost arrangements. Which standard or ISO designation applies to this tool holder? The holder follows the ISO 2525 designation and is compatible with shank designation 4C‑R S224, simplifying integration into standard tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, left-hand parting and grooving solution that combines precise clamping geometry and Horn-compatible insert support for consistent, low-vibration cuts; order the tool directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Parting tool holder – left-hand, 4 mm cutting width | Teknik Makina (D712TM) Parting tool holder for left-hand grooving and cut‑off operations on lathes, designed for secure clamping of standard inserts and short‑overhang applications in production and job‑shop environments Left-hand cutting orientation for lathe set-ups 4 mm cutting width for narrow parting operations Horn-compatible insert clamping for proven insert range ISO 2525 clamping size for standardised tool posts Consistent clamping for repeatable parting quality A compact clamp design ensures rigid support at the cutting edge, reducing chatter and improving surface finish when separating components. The holder’s 25 mm clamping height and 25 mm head width create a stable interface with the tool post, translating into predictable tool life and repeatable results in series production. Because the unit accepts widely used insert types from Horn, tooling changes are straightforward and tool selection remains economical. This stability is particularly beneficial where tight tolerances or fragile workpieces require controlled cut‑off operations. Faster set-up and secure insert handling The tool is specified to the ISO 2525 clamping format and matches common boring‑bar interfaces such as 4C‑L S229, which streamlines integration into existing tool stations and reduces set‑up time. The clamp geometry is engineered to keep the insert pocket steady under side loads, so insert seating and retention are precise. For workshop teams this means fewer micro‑adjustments at the lathe and more time machining — a rational advantage for efficient production planning and reduced cycle variability. Optimised for controlled cuts with minimal overhang With a 4 mm cutting width and a maximum cutting depth of 22 mm, the holder is tailored for narrow grooving and reliable parting operations where material separation must be clean and burrs minimised. The overall length of 150 mm offers a compact footprint that helps keep the centre of gravity close to the machine spindle, lowering bending moments for the tool and contributing to longer insert life. At a weight of 0.705 kg, handling and changing the holder during tool set‑up is manageable while still delivering the mass required for damping vibrations. Practical benefits for workshop workflows Compatibility with Horn inserts gives access to established edge geometries and grades optimised for specific materials, reducing the need for bespoke tooling solutions. The left‑hand orientation supports common lathe arrangements and left‑side cut‑off tasks without additional fixture work. These characteristics combine into a pragmatic package that supports throughput improvements and dependable component separation in mixed production runs. For left‑hand parting tasks choose Teknik Cutting Tools’ holder—contact Metav Werkzeuge for application guidance and delivery from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: D712TM Manufacturer: Teknik Makina Cutting direction: left Numbers / Core technical data Clamping height: 25 mm Head width: 25 mm Holder width: 25 mm Cutting width: 4 mm Max parting depth: 22 mm Total length: 150 mm Weight: 0.705 kg Special features / Compatibility Compatible with Horn inserts ISO designation: 2525 Boring bar designation: 4C-L S229 Left-hand grooving / parting application FAQ What lathe operations is this holder intended for? The parting tool holder is intended for left‑hand grooving and cut‑off tasks on lathes, offering secure insert clamping and a compact overhang for controlled separation cuts. Which inserts fit this holder? This holder is compatible with inserts from Horn; its clamping geometry matches common insert sizes used for narrow parting and grooving operations. How deep can the holder cut in a single pass? The holder supports a maximum parting depth of 22 mm, suitable for many standard parting and grooving requirements. Is the holder standardised for easy integration? Yes, the tool conforms to ISO 2525 clamping dimensions and aligns with boring‑bar designation 4C‑L S229 for straightforward integration into existing tool posts. What are the physical dimensions that affect setup? Key dimensions are a clamping height of 25 mm, head width 25 mm and an overall length of 150 mm; these values help determine overhang and clearance at the machine. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Secure production with a 25 x 25 mm shank, 4 mm cutting width and 22 mm maximum grooving depth for consistent parting and grooving performance; order this toolholder directly via Metav Werkzeuge or consult our specialists for technical guidance. Parting and grooving holder (D038TM) by Teknik Makina — 25 x 25 mm shank, 4 mm cutting width The Parting and grooving holder is a right-hand toolholder with a 25 x 25 mm shank, designed for indexable insert grooving and parting applications where controlled cutting depth and rigid clamping are essential 25 x 25 mm shank for secure mounting 4 mm cutting width for narrow grooves Max grooving depth 22 mm Compatible with ZCC 4C ZT.D inserts Engineered for precise parting and grooving The parting and grooving holder combines a compact footprint with focused cutting geometry to reduce vibration and improve surface finish. The 25 x 25 mm shank provides a secure connection to standard tool posts, while the 4 mm cutting width enables efficient narrow-slot cutting and parting operations. Right-hand cutting geometry supports conventional lathe toolpaths and is suited to both manual lathes and CNC turning centres. The result is increased process stability and fewer reworks per batch. Clear guidance on insert compatibility and setup Compatibility with established insert systems simplifies tool setup and inventory management. This holder accepts ZCC 4C ZT.D inserts (designation shown as 4C ZT.D) and matches the 4C-R ZT-D boring bar designation for straightforward replacement. The clamping interface is designed for positive seating of the indexable insert, which helps maintain repeatable cutting positions. For workshops without in-depth insert knowledge, using the recommended ZCC insert family reduces trial-and-error and shortens setup times. Compact, robust design for reliable cycles The toolholder’s form factor balances rigidity with accessibility: a 150 mm overall length keeps overhang low, and the modest mass (0.747 kg) helps dampen chatter during interrupted cuts. The construction focuses on stable clamping and a low centre of gravity to sustain consistent cutting conditions over long runs. A max grooving depth of 22 mm offers practical capability for common parting and grooving tasks without requiring specialised holders, supporting consistent cycle times in production environments. Workshop benefits and application scenarios This holder is suited to small-batch work and serial production where tool change simplicity and predictable performance matter. The compact shank and proven clamping geometry reduce toolholder inventory complexity, while compatibility with common inserts streamlines procurement. As a result, maintenance intervals and setup durations are reduced, contributing to better overall equipment efficiency and fewer stoppages on the shopfloor—advantages that matter for both craft workshops and industrial turning centres. For a reliable parting and grooving solution from Teknik Cutting Tools, contact Metav Werkzeuge for supply and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and availability Technical data Article number: D038TM Manufacturer: Teknik Makina Product designation: Stechklemmhalter (parting and grooving holder) Brand: Teknik Makina Facts Shank size: 25 x 25 mm Cutting width: 4 mm Max grooving depth: 22 mm Overall length: 150 mm Weight: 0.747 kg Cutting direction: right Special features Compatible with ZCC 4C ZT.D inserts Shank ISO designation: 2525 Boring bar designation: 4C-R ZT-D Designed for parting and grooving applications FAQ What inserts fit this holder best? The parting and grooving holder D038TM is designed for ZCC 4C ZT.D indexable inserts; using the recommended insert family ensures correct seating and predictable cutting performance. Is the holder suitable for CNC turning centres? Yes, the holder’s 25 x 25 mm shank and rigid clamping make it suitable for CNC turning as well as manual lathes where right-hand cutting is required. How deep can the holder groove in a single pass? The holder supports a maximum grooving depth of 22 mm; actual cutting depth per pass should follow tool and insert manufacturer recommendations for material and cutting conditions. Does the toolholder require a specialised toolpost? No specialised toolpost is needed; the 25 x 25 mm shank fits standard toolposts designed for that shank size and the ISO designation 2525. What are typical applications for this holder? The holder suits parting off, narrow groove cutting and face grooving in general workshop and small-series production, offering controlled chip formation and stable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise clamping, a compact 150 mm overall length and a robust 25 mm clamping head to ensure clean parting and reliable repeatability in production. Order the holder directly via Metav Werkzeuge or consult the team for fitting and insert advice. Stechklemmhalter D961TM – Parting tool holder with 25 mm clamping head, right-hand cutting Stechklemmhalter D961TM is a compact parting and grooving clamping holder designed for straightforward clamping of thin inserts and reliable right-hand cutting in turning processes Right-hand parting holder for grooving operations Clamping head width 25 mm Cutting width 4 mm, max plunge 40 mm Compatible with Korloy 4C MGM inserts Precise clamping for repeatable grooves and clean parting The design centres on a 25 mm clamping head and a secure clamping mechanism that stabilises the insert during high-precision turning operations. With a 4 mm cutting width and a max plunge depth of 40 mm, the holder minimises chatter and lateral deflection, which translates into a predictable surface finish and reduced rework. The compact 150 mm overall length and modest weight of 0.721 kg keep tool overhang low, improving rigidity on both CNC and conventional lathes. These mechanical characteristics are particularly relevant when consistent groove geometry and close tolerances are required on production runs. Faster set-up and compatible interface for efficient shopfloor use Engineered to match common turret and holder conventions, the holder carries the ISO 2525 designation and accepts the 4C-R MGM tool shank, enabling straightforward mounting and repeatable alignment. Compatibility with Korloy 4C MGM inserts simplifies sourcing and reduces inventory complexity by allowing the use of widely available parting cutters. The clamping concept supports quick insert seating and reliable retention, which shortens downtime during tool changes and helps sustain machining rhythm in batch production. Clear, standardised interfaces mean less adjustment and a lower risk of incorrect assembly. Practical workshop benefits and application focus As a grooving and parting solution, the D961TM is aimed at metalworking shops that prioritise stability and simple handling. The combination of a well-dimensioned clamping head and a narrow cutting width makes the holder favourable for close-tolerance parting where material loss must be controlled. The robust build reduces frequent re-clamping and supports consistent results across repeat parts, contributing to predictable cycle times and less scrap. For technical clarification on fitment or for advice on optimal insert geometry and cutting parameters, Metav Werkzeuge’s specialists are available to provide pragmatic guidance. For tailored advice on integrating the Teknik Makina D961TM parting tool holder into existing toolrooms, or to discuss compatible inserts and mounting standards, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — assistance and rapid supply are available. Technical data Article number: D961TM Manufacturer: Teknik Makina Cutting direction: right SKU: D961TM Facts Clamping head width: 25 mm Cutting width: 4 mm Max plunge depth: 40 mm Overall length: 150 mm Weight: 0.721 kg Special features Compatible inserts: 4C MGM Compatible insert manufacturer: Korloy ISO designation: 2525 Toolholder shank: 4C-R MGM Files: 62de7ec033927e49dbf3276a, 62de7dd333927e49dbf3271e FAQ Which inserts fit the holder? The D961TM accepts 4C MGM style inserts; compatibility with Korloy 4C MGM inserts is specified for straightforward selection of cutting tips. What is the maximum plunge depth for grooving? The maximum plunge depth is 40 mm, as stated for the parting tool holder, providing guidance for safe machining envelopes. Is the cutting direction right-hand or left-hand? This holder is configured for right-hand cutting, suitable for typical right-hand turning operations. What interface does the holder use for mounting? The holder is designated ISO 2525 and is fitted to a 4C-R MGM tool shank, supporting standardised mounting and repeatable alignment. How heavy is the tool holder and how long is it? The overall length is 150 mm and the weight is 0.721 kg, values that support calculations for overhang and rigidity. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com