Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of a slim 16 mm shank, internal coolant and compatibility with APKT 0903 indexable inserts for stable, chip‑managed milling. Order the shank milling cutter directly via Metav Werkzeuge or consult the technical team for specific machining parameters. Shank milling cutter S204-1TM — for APKT 0903 indexable inserts, 16 mm shank (Teknik Makina) A Shank milling cutter S204-1TM engineered for precision milling with APKT 0903 indexable inserts, featuring a 16 mm shank and internal coolant to maintain cutting performance in demanding production environments. 16 mm shank diameter for standard toolholders Internal coolant for improved chip evacuation Compatible with APKT 0903 indexable inserts Robust body length L120 mm for stable machining Stability and repeatable machining accuracy for indexable milling The S204-1TM holder is built around a 16 mm shank that delivers high clamping rigidity in common toolholders, reducing vibration and enhancing surface finish. With integrated internal coolant, the tool supports efficient chip evacuation and cooling close to the cutting edge, which lowers cutting temperatures and helps extend insert life. Designed for indexable insert systems, the holder maintains positional repeatability so that each insert index produces consistent results, supporting predictable cycle times and reduced rework. Fast maintenance and secure insert fixation for uninterrupted production Serviceability has been prioritised: the body accepts APKT 0903 inserts and secures them with a Torx screw specification M2.5x5.5 tightened with a T8 key, enabling swift insert replacement and minimal downtime. The two cutting edges support economical machining strategies by allowing multiple indexings before a tool change is required. At a lightweight of 0.185 kg, the assembly is easy to handle during tool preparation while still providing the mass necessary for damping under cut, promoting steady cutting conditions across the advertised cutting length. Proven compatibility and dependable sourcing for the workshop Compatibility with Walter-manufactured inserts broadens tooling options and simplifies stocking decisions for production managers. The S204-1TM body (L120 mm overall, 40 mm cutting portion) is suitable for small to medium series milling where indexable solutions are preferred for cost efficiency and process control. Sourced from Teknik Makina and distributed through Metav Werkzeuge, the component benefits from reliable European logistics and technical support that help integrate the tool into existing machining processes with minimal disruption. Request a tailored quote or machining recommendation from Metav Werkzeuge for the Teknik Makina S204-1TM shank milling cutter with internal coolant; technical enquiries via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Product type: Shank milling cutter SKU: S204-1TM Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Overall length: 120 mm Cutting length (shank): 40 mm Number of cutting edges: 2 Weight: 0.185 kg Special features Internal coolant Compatible with APKT 0903 indexable inserts Compatible with inserts by Walter Torx key: T8 Torx screw: M2.5x5.5 FAQ What inserts fit this milling cutter? The shank milling cutter accepts APKT 0903 indexable inserts and is specified as compatible with inserts from Walter. Is internal coolant included and how does it help? Internal coolant is integrated in the S204-1TM body to deliver cutting fluid directly to the insert edge, improving chip control and extending insert life. What is the required screw and key for insert clamping? Insert clamping uses a Torx screw sized M2.5x5.5, tightened with a T8 Torx key to ensure secure fixation. How long is the tool and what is the effective cutting length? The tool has an overall length of 120 mm with a cutting portion (shank) of 40 mm designed for reliable engagement with the insert. Can the tool be used in standard 16 mm toolholders? Yes, the 16 mm shank diameter is suitable for standard toolholders that accept a 16 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, 16 mm shank design paired with internal coolant for longer tool life and consistent chip control; compatible with APKT 1003 indexable inserts for rapid insert changes. Order directly via Metav Werkzeuge or ask our consultants for application guidance. Insert milling cutter S031-1TM — 16 mm shank, internal coolant (Teknik Makina) An insert milling cutter S031-1TM designed for use with APKT 1003 indexable inserts, combining secure clamping and directed coolant for stable milling operations 16 mm shank diameter Internal coolant supply Compatible with APKT 1003 inserts 30 mm cutting length Improved coolant management for longer tool life The built-in internal coolant channel directs cutting fluid straight to the cutting edge, reducing heat at the chip formation zone and improving surface quality. For tasks that alternate between high feed and interrupted cuts, the targeted coolant flow supports more consistent tool temperatures, which reduces thermal wear and lowers the risk of premature edge breakdown. This results in longer tool life and fewer insert changes, translating into less downtime for the production line and more predictable maintenance planning. Stable clamping and repeatable accuracy A 16 mm shank with a 100 mm overall length provides a compact, rigid connection between spindle and cutter body, reducing vibration and improving dimensional consistency. The tool accepts APKT 1003 indexable inserts and uses M2.5x5.5 screws with a Torx T8 drive for secure, repeatable seating. With two cutting edges and a 30 mm cutting length, the design balances material removal with controlled cutting forces, supporting stable finishes and repeatable results across batches. Fast setup and workshop compatibility Compatibility with common insert formats and the YG-1 insert range simplifies stock management and reduces sourcing complexity. The lightweight construction (approx. 0.275 kg) makes handling during tool changes straightforward, while standard fastening hardware minimises the need for specialist tools. The cutter’s balance of rigidity and accessibility supports both small-series production and routine workshop jobs, enabling smooth integration into existing tool pools without extensive requalification. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina S031-1TM insert milling cutter or to arrange direct supply from our Emmerich hub: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S031-1TM UID: S031-1TM Product type: Insert milling cutter (shank cutter) Numbers / Core technical data Shank diameter: 16 mm Overall length: 100 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.275 kg Compatible insert type: APKT 1003 Designs / Special features Internal coolant supply Fastening: Torx T8, screw M2.5x5.5 Compatible insert manufacturer: YG-1 Manufacturer: Teknik Makina FAQ Is the cutter compatible with APKT 1003 inserts from different manufacturers? The S031-1TM accepts APKT 1003 indexable inserts and is listed as compatible with inserts from YG-1; inserts meeting the APKT 1003 specification from other reputable makers are typically suitable when dimensions and clamping features match. Does the tool provide internal coolant to the cutting edge? Yes, internal coolant is integrated into the cutter body to deliver cutting fluid directly to the insert edge, improving chip evacuation and reducing thermal wear on the insert. What drive and fastening hardware are required for insert changes? Insert clamping uses a Torx T8 driver and M2.5x5.5 screws for secure fastening, enabling quick and repeatable insert replacement. What are the main dimensional features to consider when fitting this cutter? Key dimensions are a 16 mm shank diameter, 100 mm overall length, and 30 mm cutting length; these determine rigidity and reach for specific milling setups. Is the S031-1TM suitable for high-speed milling? The tool’s compatibility with APKT 1003 inserts and internal coolant supports elevated cutting conditions, but final speed and feed values depend on the chosen insert grade and the workpiece material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a 16 mm shank and a 40 mm cutting length for reliable chip control and consistent surface finish; the tool supports efficient machining with APKT 1003 inserts and is supplied by Teknik Makina via Metav Werkzeuge — order the cutter directly through Metav Werkzeuge or consult their advisors for selection support Shank milling cutter for APKT 1003 indexable inserts – 16 mm shank, internal coolant (Teknik Makina) Shank milling cutter for APKT 1003 indexable inserts designed for precision face milling and slotting where controlled coolant delivery is required 16 mm shank diameter Internal coolant supply Compatible with Korloy APKT 1003 120 mm overall length High-performance routing for repeatable production results This indexable cutting system pairs a compact 16 mm shank with an optimised 40 mm cutting length to deliver stable machining in short-reach applications. The combination of a rigid shank and the tool geometry reduces vibration and improves surface finish, while the internal coolant channel directs cutting fluid precisely to the cutting edge for improved chip evacuation and tool life. The construction supports higher material removal rates with consistent dimensional accuracy, making it a pragmatic choice for small-batch production and toolrooms where repeatability matters Clear compatibility and insert handling explained Compatible with APKT 1003 indexable inserts and designed to accept inserts from Korloy, the cutter simplifies inventory and insert management. The tool uses a Torx fastening system (Torx T8) with a M2.5x5.5 screw for secure seating of the inserts; this combination ensures reliable clamping and quick insert changes. For operators unfamiliar with insert nomenclature: APKT denotes a triangular, negative-geometry insert suitable for medium to heavy milling—its shape provides three effective edges and consistent chip control when paired with the correct cutter body Practical shop-floor advantages and ease of use The compact footprint and 120 mm overall length support accessibility in confined setups and multi-axis machines. With two cutting edges, the cutter offers a balance between cutting engagement and economy of inserts, enabling cost-effective machining cycles. The tool's modest weight (approx. 0.185 kg) and straightforward clamping mean reduced spindle load during rapid movements. These practical benefits translate to fewer tool changes, less machine downtime and reliable throughput for routine milling tasks Handling, maintenance and service considerations Maintenance is straightforward: replacement inserts and the Torx T8 key allow fast reconditioning of the cutting head without specialised fixtures. The internal coolant channel requires only routine flushing to avoid blockages; keeping the coolant pathway clear preserves consistent lubrication at the cutting zone and prolongs insert life. Supplied by Teknik Makina under SKU S162-1TM, the design prioritises workshop efficiency and repeatable set-ups, supporting both small businesses and industrial users with predictable performance Choose the Teknik Makina indexable cutter for consistent milling performance and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: S162-1TM Product: Shank milling cutter for APKT 1003 indexable inserts Manufacturer: Teknik Makina ECLASS: 21180806 Facts Shank diameter: 16 mm Overall length: 120 mm Cutting length: 40 mm Weight: 0.185 kg Number of cutting edges: 2 Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant Compatible with APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Indexable cutter design for easy insert changes FAQ Which inserts fit the cutter and who supplies them? The cutter accepts APKT 1003 indexable inserts; Korloy-manufactured APKT 1003 inserts are compatible and commonly used with this type of indexable cutter How is coolant delivered to the cutting edge? Coolant is supplied through the internal channel built into the tool body, delivering fluid directly to the insert tip for improved chip evacuation and tool life What fastening hardware is required for insert changes? Insert clamping uses a Torx T8 key and M2.5x5.5 screw, allowing secure seating and quick replacement of inserts Is the tool suitable for lightweight and short-reach machining setups? Yes, the compact 16 mm shank and 120 mm overall length make the tool suitable for confined workspaces and short-reach milling operations Can the cutter handle continuous production tasks? The combination of rigid shank, internal coolant and indexable inserts supports reliable continuous machining with predictable tool-change intervals Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact, robust shank milling cutter that pairs a 16 mm shank with internal coolant and APKT 1003 compatibility to deliver steady material removal and simplified tool changes. Benefit from precise chip evacuation and secure fastening — order directly via Metav Werkzeuge or ask our consultants for a tailored tooling plan. S140-1TM – Shank milling cutter with internal coolant, 16 mm shank (Teknik Makina) The S140-1TM is a shank milling cutter designed for indexable APKT 1003 inserts, delivering reliable internal coolant support for improved chip control in short-reach milling applications. 16 mm shank for compact toolholders Internal coolant improves chip evacuation Compatible with APKT 1003 Korloy inserts Secured with M2.5x5.5 Torx screw (T8) Reduced setup time with predictable cutting results The design focuses on efficiency: a 16 mm shank and 100 mm overall length create a compact tool that fits tight toolholders while maintaining rigidity. The short 30 mm cutting length concentrates cutting forces close to the holder, which reduces vibration and supports consistent surface finish. Compatibility with APKT 1003 indexable inserts means insert changes are quick and repeatable, lowering downtime in batch production. The tool’s modest mass also simplifies balancing and handling during frequent tool swaps. Improved process reliability through coolant-fed design Equipped with internal coolant, the cutter channels coolant directly to the cutting zone, which enhances chip evacuation and extends insert life under continuous operation. This internal feed is particularly effective when machining semi-finished components where consistent chip control prevents rework. The insert pocket is secured by an M2.5x5.5 Torx screw, tightened with a T8 key, ensuring a stable clamping interface that supports repeatable indexable insert seating and safe high-feed passes. Practical engineering for workshop integration With two cutting edges and a compact form factor, the cutter is suited to finishing and light roughing tasks where accessibility and repeatability matter. The shallow cutting length reduces leverage and helps maintain toolpath accuracy in milling cycles. The specification emphasises compatibility with Korloy APKT 1003 inserts, offering flexibility for shops that standardise on widely available insert grades and geometries. The S140-1TM is therefore a practical choice for manufacturers seeking dependable, easy-to-service indexable tooling. Supply and tooling guidance for procurement This shank milling cutter supports streamlined tool procurement and maintenance strategies: standardised insert format, small-format shank diameter and coolant capability all contribute to lower stocking complexity and clearer reordering criteria. For workshops aiming to reduce supplier count while maintaining precision, the tool aligns with those goals and integrates into common clamping systems used in modern CNC setups. Contact Metav Werkzeuge for a personalised quotation or to discuss how this Teknik Makina shank milling cutter with internal coolant can be integrated into existing tooling setups Technical data SKU: S140-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter eClass: 21180806 Facts Shank diameter: 16 mm Overall length: 100 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.156 kg Special features Internal coolant Compatible with APKT 1003 indexable inserts by Korloy Secured with M2.5x5.5 Torx screw Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; compatibility was specified for Korloy APKT 1003 grades and geometries used in fine finishing and light milling operations. Is the cutter coolant-fed? Yes — the S140-1TM is equipped with internal coolant channels designed to deliver coolant directly to the cutting zone for improved chip control and longer insert life. What holder size is required? A 16 mm shank holder is required; the tool’s 16 mm shank diameter is intended for compact holders and standard collet or shrink-fit systems that accommodate that diameter. How is the insert secured? The insert pocket is secured with an M2.5x5.5 Torx screw tightened using a T8 key to ensure repeatable clamping and safe cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable cutter that combines straightforward maintenance, stable handling and immediate compatibility with common APMT 0602 systems; the result is reduced downtime and predictable tool performance. Order directly via Metav Werkzeuge or consult their specialists for fitment and availability. Indexable End Mill S005TM — 16 mm diameter, for APMT 0602 indexable inserts by Teknik Makina The Indexable End Mill S005TM is an insert-based milling cutter intended for general machining setups using APMT 0602 format inserts; it suits workshops and production cells that require fast insert changes and consistent repeatability with a 16 mm shank. Compatible with APMT 0602 indexable inserts 16 mm shank, 90 mm overall length 25 mm cutting length, 4 cutting edges Torx T6 screw M2x4.2 fastening High compatibility for standard insert systems and simple inventory control The cutter is designed around the APMT 0602 insert format, which keeps tooling logistics straightforward for shops using that common geometry. With a 16 mm shank and a 90 mm overall length, the tool mounts in standard collet or holder systems and supports economical stocking: only the small carbide inserts need replacing rather than the whole body. This approach reduces capital tied up in consumables and simplifies maintenance planning without changing existing clamping concepts. Operational advantages: fast changeovers and predictable machining Equipped with 4 cutting edges and a 25 mm cutting length, the tool provides even load distribution and steady cutting behaviour over short axial engagements. The indexable design allows insert replacement in seconds using the specified fastening hardware, which minimises interruption to production. The modest mass of 0.12 kg contributes to lower dynamic load on the spindle and eases handling during tool changes, supporting a rapid workflow in batch or single-part operations while helping maintain consistent cycle times. Mounting, maintenance and spare parts explained Assembly uses a Torx fastener; the specified key size is Torx T6 and the screw is M2x4.2, which are standard service items in most toolrooms. The cutter body accepts inserts from common manufacturers, notably Korloy, so replacement inserts are widely available. The 16 mm shank diameter requires a matching holder or collet: check the toolholder catalogue for 16 mm compatible clamping. Routine checks should include correct screw torque and seat cleanliness to ensure repeatable insert clamping and stable cutting performance. For supply, stock details and compatibility checks contact Metav Werkzeuge GmbH in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm availability and suitability for the intended machining setup. Technical Data Article number: S005TM Manufacturer: Teknik Makina Type: Indexable end mill for APMT 0602 inserts Compatible inserts manufacturer: Korloy Torx key: T6 Screw: M2x4.2 Facts Diameter: 16 mm Overall length: 90 mm Shank diameter: 16 mm Cutting length: 25 mm Cutting edges: 4 Weight: 0.12 kg Special features For APMT 0602 indexable inserts Quick insert replacement Suitable for standard tool holders with 16 mm shank Supplied with Torx fastening hardware FAQ Which inserts fit this cutter? The cutter accepts APMT 0602 indexable inserts; Korloy inserts with the same designation are compatible and commonly used with the S005TM from Teknik Makina. What fastening hardware is required for insert mounting? Insert clamping uses a Torx fastener — Torx T6 — and the specified screw size is M2x4.2; keep matching spares in the workshop for rapid replacement. Which toolholders are suitable for mounting the cutter? Holders or collets designed for a 16 mm shank are required; the 16 mm shank and 90 mm overall length conform to common holder dimensions. How many cutting edges are available and what is the cutting length? The tool has 4 cutting edges and a 25 mm cutting length, giving balanced engagement for short to moderate axial depths. Is the cutter easy to handle during tool changes? Yes — with a weight of 0.12 kg and indexable inserts, the S005TM offers low handling load and quick insert replacement to reduce changeover time. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust mix of compatibility with APMT 0602 indexable inserts, a 16 mm shank for rigidity and a 25 mm cutting height for deeper engagement — ideal for stable, repeatable milling. Order directly via Metav Werkzeuge or consult our specialists for specification support. S029TM Indexable milling cutter by Teknik Makina — for APMT 0602 inserts, 16 mm shank The S029TM is a compact indexable milling cutter designed for efficient face and slot milling using APMT 0602 indexable inserts, suited to production and jobbing-shop applications requiring predictable tool life and quick insert changes Compatible with APMT 0602 indexable inserts 16 mm shank for secure clamping 25 mm effective cutting height Four cutting edges for stable milling Reliable performance for high-duty milling operations The indexable milling cutter concept offers a cost-effective route to repeatable machining: replaceable inserts minimise downtime and keep tooling costs predictable. With a 16 mm shank, the tool provides the stiffness required for consistent chip formation, while the four cutting edges balance radial forces for smoother operation. The 90° cutting angle facilitates face milling and shoulder operations, delivering a flat, accurate surface without complex set-up changes. Fast, secure insert changing reduces non-productive time Set-up and maintenance are simplified by the standardised insert system and secure screw fixing. The cutter uses a Torx M1.8x4.1 clamping screw, tightened with a T6 key, ensuring reproducible torque and minimal play at the insert pocket. This design reduces the risk of incorrect seating and supports quick index-and-go maintenance, which translates into better machine utilisation and lower assembly overhead in batch production. Straightforward specification for purchasing and stocking The tool’s geometry — 16 mm nominal diameter and 25 mm cutting height — makes it straightforward to plan toolholders and tool inventory. Stocking a small range of insert grades for APMT 0602 provides flexibility across a range of steels and aluminium alloys where indexable inserts are appropriate, while also reducing the number of full-diameter solid cutters required. The compact overall length and standard shank diameter ease integration into existing tool management systems. Consistent results and predictable lifecycle Designed with industrial production in mind, the cutter offers repeatable performance across runs: the combination of robust shank dimensions and standardised insert fixation supports predictable wear patterns. That predictability aids maintenance scheduling and cost accounting, and the ability to rotate or replace inserts extends tool life without the need for regrinding. For shops seeking reliability with efficient consumable handling, this milling solution is practical and economical. Contact Metav Werkzeuge for tailored ordering and technical clarification on the Teknik Cutting Tools S029TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable insert grades and supply options Technical Data Article number: S029TM Manufacturer: Teknik Makina ECLASS: 21180806 Core specifications Shank / diameter: 16 mm Cutting height: 25 mm Overall length: 120 mm Cutting angle: 90° Cutting edges: 4 Weight: 0.16 kg Compatible inserts: APMT 06 / APMT 0602 Compatible insert manufacturer: Korloy Torx screw: M1.8x4.1 Torx key size: T6 Special features Indexable milling cutter design Replaceable APMT 0602 inserts Four-edged cutter for balanced cutting Compact overall length for versatile use FAQ Which inserts fit this cutter? The cutter accepts APMT 06 series inserts, specifically the APMT 0602 size; Korloy-specified grades are compatible with the tool geometry. What shank diameter is required for mounting? Shank and nominal diameter are 16 mm, suitable for holders that clamp 16 mm shanks. How deep can the cutter engage the workpiece? The tool provides an effective cutting height of 25 mm, allowing deeper single-pass engagement compared with short-profile cutters. What fastener and key are used to secure inserts? Inserts are fixed with a Torx M1.8x4.1 screw and require a T6 Torx key for secure, repeatable tightening. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, reliable milling solution that combines a 16 mm shank, internal coolant and compatibility with APMT 11T3 indexable inserts for stable production runs; order the S230-1TM directly via Metav Werkzeuge or consult our team for process integration. Shank milling cutter S230-1TM — 16 mm shank, internal coolant (Teknik Makina) The Shank milling cutter S230-1TM is designed for APMT 11T3 indexable inserts and suited to precision milling tasks where secure clamping and coolant-fed cutting increase reproducibility and throughput. 16 mm shank diameter Internal coolant for stable cutting Compatible with APMT 11T3 (Korloy) inserts 180 mm overall length, 30 mm cutting length Precision milling with indexable inserts for efficient chip removal The S230-1TM is an insert milling cutter built to deliver repeatable results in batch and single‑piece production. Fitted for APMT 11T3 inserts, the tool combines the flexibility of indexable cutting edges with a compact geometry that supports efficient material removal. With 2 cutting edges, the design balances cutting force and surface finish, making it suitable for general milling tasks and where predictable tool life is a priority. The indexable system reduces downtime for edge changes and keeps productivity high. Coolant-fed design to protect inserts and improve consistency An internal coolant supply ensures the cooling medium is delivered close to the cutting zone; this design reduces thermal loading and improves chip evacuation. The result is longer insert life and a lower risk of built-up edge on the insert relief face, which supports consistent part quality over longer cycles. For operations that require tight tolerances, the coolant-fed concept helps preserve dimensional stability and reduces the number of rework cycles. Stable clamping and compact dimensions for controlled machining A 16 mm shank and a 180 mm overall length with a 30 mm cutting length provide a compact tool body that resists deflection under load, improving surface finish and dimensional accuracy. Secure fastening is provided via the specified Torx fastening hardware (T8 key, M2.5x5.5 screw), delivering reliable insert seating and repeatable clamping torque. The tool’s modest mass (0.281 kg) aids rapid acceleration on CNC spindles while maintaining the rigidity required for consistent milling performance. Contact Metav Werkzeuge for technical matching to existing toolholders or to request the S230-1TM from stock in Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: S230-1TM Article: Shank milling cutter for APMT 11T3 indexable inserts Brand: Teknik Makina Label: 16mm Schaftfräser APMT 11T3 L180mm mit Innenkühlung UID: S230-1TM Core dimensions Diameter: 16 mm Shank diameter: 16 mm Overall length: 180 mm Cutting length: 30 mm Cutting edges: 2 Weight: 0.281 kg Features & compatibility Internal coolant: yes Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 Product type: Shank milling cutter ECLASS: 21180806 FAQ What inserts fit this milling cutter? The S230-1TM accepts APMT 11T3 indexable inserts and is specified as compatible with Korloy insert types. Is the tool suitable for continuous production runs? Yes. The coolant-fed design and indexable insert system of the cutter support extended runs with predictable tool changes. How is the insert secured to the cutter? Inserts are fastened with the Torx screw M2.5x5.5 using a T8 key to ensure consistent clamping on the insert seat. What are the key dimensions to check for toolholder compatibility? Check the 16 mm shank diameter and 180 mm overall length against the toolholder and machine reach to ensure correct fit. How many cutting edges does the tool have and what is the machining implication? The cutter features 2 cutting edges, a configuration that balances chip thinning and stable cutting forces for general milling tasks. Can the internal coolant be used with standard machine coolant systems? Yes. The internal coolant connection is compatible with standard machine coolant supplies when properly routed through the toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 16 mm shank, 50 mm cutting length and a secure Torx clamping system for reliable, repeatable milling operations; order the S173TM via Metav Werkzeuge or consult our advisors for integration into existing toolsets. S173TM shank cutter for APXT 1003 indexable inserts — 16 mm shank, 2 cutting edges (Teknik Makina) The S173TM is a shank cutter engineered for use with APXT 1003 indexable inserts, offering a compact overall length for machine compatibility and straightforward insert replacement. Robust 16 mm shank for secure holder fit 2 cutting edges for efficient material removal 50 mm cutting length for deeper machining Compatible with APXT 1003 indexable inserts Secure clamping for consistent results The solid 16 mm shank delivers high stability in standard tool holders, reducing vibration and improving surface finish during milling. At a weight of 0.23 kg, the tool maintains low inertia while offering the rigidity needed for indexed‑insert systems. This specification helps stabilise cutting forces and supports repeatable tool offsets in CNC routines, which in turn reduces setup time and contributes to predictable production cycles. Cost-efficient cutting with replaceable APXT 1003 inserts Designed around the APXT 1003 insert family, the cutter uses 2 cutting edges that enable efficient chip formation and even wear distribution. Inserts are secured by a Torx M2.5x5.5 screw tightened with a T8 key for fast, reliable changes. The indexable‑insert concept minimises tooling costs over time: only the insert is replaced when worn, not the entire tool body, making this shank cutter a pragmatic choice for workshops that balance performance and running costs. Reach and rigidity for typical milling tasks With an overall length of 150 mm and a dedicated cutting length of 50 mm, the design provides reach for moderate depths while keeping deflection low. The 90° cutting angle supports square‑shoulder milling and straightforward face operations, while the nominal 16 mm diameter ensures compatibility with a wide range of toolholders. These dimensions make the tool suitable for installations where access and tool clearance are constraints but rigidity cannot be compromised. Workshop integration and practical handling The shank cutter supports the Korloy range of inserts and is identified by SKU S173TM, simplifying procurement and inventory management. Its modular nature enables quick replacement cycles and predictable tool life planning. For manufacturers and contract workshops aiming for stable process output, this cutter integrates with existing indexable systems and reduces downtime associated with tool changes. For procurement advice, technical integration or to request the S173TM shank cutter with APXT 1003 compatibility, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: S173TM Manufacturer: Teknik Makina Product: Shank cutter for APXT 1003 indexable inserts SKU: S173TM Facts Shank diameter: 16 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.23 kg Cutting angle: 90° Special features Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Brand: Teknik Makina FAQ Which inserts are compatible with this shank cutter? The shank cutter is compatible with APXT 1003 indexable inserts; the tool is supplied to accept these insert sizes and geometries. How is the insert secured in the cutter? Inserts are fixed with a Torx M2.5x5.5 screw; use a T8 key for clamping and release to ensure a secure, repeatable fit. What are the key dimensions to check before installation? Confirm the 16 mm shank diameter, 150 mm overall length and 50 mm cutting length to ensure holder clearance and machine suitability. Can this tool be used with Korloy inserts? Yes, the cutter is specified for APXT 1003 inserts and is compatible with inserts from Korloy as indicated in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining performance with the compact 16 mm diameter and a 40 mm cutting length, offering stable clamping and easy insert changes for continuous production. Order directly via Metav Werkzeuge or ask our consultants for application-specific advice. Schaftfräser – insert milling cutter for BLMP 0603 indexable inserts, 16 mm The Schaftfräser is an insert milling cutter designed for secure shank clamping and efficient material removal with BLMP 0603 indexable inserts in industrial milling applications. 16 mm diameter, 40 mm cutting length Compatible with BLMP 0603 indexable inserts 15 mm precision shank for stable clamping Torx T8, screw M3x6.2 for quick insert changes Increased productivity through insert-based cutting The insert-based design combines the economy of replaceable cutters with the performance expected in production environments. Fitted for BLMP 0603 indexable inserts, the tool enables fast index changes and minimal downtime, supporting a steady material removal rate. The geometry with two cutting edges provides a predictable cutting force and lower spindle load, which helps maintain consistent cycle times and reduces unexpected stoppages. Secure clamping and runout stability for accurate results A 15 mm precision shank and a total length of 150 mm ensure reliable seating in standard tool holders while limiting runout and vibration. This mechanical stability translates into repeatable part quality and longer insert life, as forces are transferred efficiently through the holder rather than the insert seat. The balanced design and modest overall mass also support smoother spindle operation and reduced tool wear. Simple maintenance and fast insert replacement Maintenance is straightforward thanks to standardised fastenings: a Torx T8 keyway and M3x6.2 screw permit quick, toolroom-friendly insert changes and secure clamping. The clear interface between the cutter body and the indexable inserts simplifies service routines and lowers mean time to repair, making the tool suitable for busy shops that require predictable upkeep and easy inventory handling. Suitable for versatile milling tasks with trusted components Designed for use with Taegutec-compatible BLMP 0603 inserts, the cutter is appropriate wherever indexable insert milling is the preferred strategy for combined roughing and profile finishing. The compact 16 mm diameter and 40 mm cutting length offer a balance between reach and stiffness, making the tool a solid choice for medium-duty slotting and peripheral milling tasks in organised production settings. Contact Metav Werkzeuge for tailored technical guidance and reliable supply from Emmerich — quote S479-2TM (Teknik Makina) when enquiring Technical Data SKU: S479-2TM Manufacturer: Teknik Makina Diameter: 16 mm Total length: 150 mm Shank diameter: 15 mm Cutting length: 40 mm Weight: 0.231 kg Number of cutting edges: 2 Compatible with BLMP 0603 indexable inserts (Taegutec) Torx key: T8 Torx screw: M3x6.2 Product type: Insert milling cutter (shank milling cutter, Schaftfräser) FAQ What inserts fit this milling cutter? The milling cutter accepts BLMP 0603 indexable inserts; it is specified for Taegutec-compatible grades and geometries. Which holder size is required for stable clamping? A tool holder that accepts a 15 mm shank is required to ensure proper seating and runout control for this insert milling cutter (SKU S479-2TM). How many cutting edges does the cutter have? The cutter is configured with 2 cutting edges, offering a balance of cutting efficiency and chip evacuation. Is a special screw or key needed for insert changes? Insert retention uses a Torx T8 interface with an M3x6.2 screw for rapid and secure replacement. Can this tool be used for finishing as well as roughing? With the appropriate BLMP 0603 insert geometry and grade, the cutter is suitable for both profile finishing and medium roughing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the reliable combination of compact dimensions, repeatable setup and easy insert changes for consistent milling results; place orders or request advice through Metav Werkzeuge for seamless procurement and fast delivery. Shank milling cutter S301TM — for LNMT 0804 indexable inserts, Ø 16 mm, 2 cutting edges (Teknik Makina) The Shank milling cutter S301TM is a compact, insert-based milling tool engineered for light to medium milling tasks where a secure 16 mm shank and quick insert replacement are required Shank Ø 16 mm Designed for LNMT 0804 inserts Two cutting edges Torx screw M2.5×7, key T8 Stability and predictable cutting performance The compact Ø 16 mm shank delivers a stable clamping interface that reduces vibration and improves surface finish compared with undersized holders. With two cutting edges the tool provides a balanced cut and consistent chip flow, which helps to maintain geometric tolerance during interrupted cuts. The modest weight of 0.256 kg contributes to easier handling and quicker tool changes at the machine, benefiting cycle-time-sensitive production. Fast insert changes and low-maintenance setup Indexable LNMT 0804 inserts are secured with a Torx screw (M2.5×7) using a T8 key, enabling swift replacement without specialised fixtures. This simplifies maintenance routines and reduces machine downtime: once the worn insert is removed, a fresh insert restores cutting performance without the need to replace the entire tool body. The result is predictable tool life management and lower consumable costs per cutting edge. Dimensions that simplify workshop logistics Key dimensions such as a 150 mm overall length, a 40 mm cutting length and a 16 mm shank diameter allow straightforward integration into existing tool lists and collet systems. These standardised measurements support rapid tool changes and repeatable set-ups, reducing fixture adjustments and enabling faster production ramps when switching jobs or workpieces. Suitable applications and compatibility The shank milling cutter is configured specifically for LNMT 0804 indexable inserts and is compatible with ISCAR-specified plates, offering a practical solution for indexable milling operations where replaceable cutting edges are preferred over solid-carbide tools. The two-edge configuration is appropriate for roughing and light finishing passes where reliable chip evacuation and simple indexation are priorities. Contact Metav Werkzeuge for procurement advice and to arrange supply of the Teknik Makina shank milling cutter S301TM for LNMT 0804 indexable inserts — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: S301TM Manufacturer: Teknik Makina Designation: Shank milling cutter for LNMT 0804 indexable inserts Core data Shank diameter: 16 mm Cutting length: 40 mm Overall length: 150 mm Weight: 0.256 kg Cutting edges: 2 Connection diameter: 16 mm Special features For LNMT 0804 indexable inserts Compatible with ISCAR inserts Torx screw M2.5×7 Torx key T8 FAQ What inserts are compatible with the S301TM? The S301TM is designed for LNMT 0804 indexable inserts; compatibility with ISCAR-specified inserts is indicated in the product data. How is the insert secured in the cutter? Inserts are fastened with a Torx screw M2.5×7; a T8 key is the required tool for tightening and replacement. What are the main dimensions to check for machine compatibility? Key dimensions are a 16 mm shank diameter, 150 mm overall length and 40 mm cutting length, which should be checked against the machine holder and collet system. Is the S301TM suitable for finishing passes? With two cutting edges the tool can be used for light finishing where stability and chip control are sufficient; for high-precision finish passes alternative tools or cutting parameters may be recommended. How heavy is the tool for handling and storage planning? The tool weight is 0.256 kg, making it easy to handle during tool changes and storage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Choose the combination of internal coolant, a 16 mm shank and compatibility with LNMU 0202 indexable inserts for stable, high‑productivity milling and reduced tool wear. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. Shank Milling Cutter S708TM – 16 mm shank, internal coolant (Teknik Makina) The Shank Milling Cutter S708TM is a purpose‑built milling body for LNMU 0202 indexable inserts, offering a compact solution for face and shoulder milling on CNC machines in industrial workshops. 16 mm shank diameter Internal coolant feed Compatible with LNMU 0202 inserts Three‑flute design for smooth cutting Stable coolant supply for consistent tool life The milling body is engineered with an integrated internal coolant channel that directs cutting fluid precisely to the insert interface. This targeted cooling reduces thermal load and improves chip evacuation, which in turn extends insert life and stabilises cutting forces during long runs. Compatible with modern coolant strategies, the design supports higher cutting parameters without sacrificing surface quality, making it suitable for series production as well as demanding single‑part machining. Rigidity and geometry for accurate material removal A 16 mm shank combined with a three‑flute geometry provides a balanced compromise between rigidity and chip clearance. The construction minimises deflection under load, which yields repeatable dimensions and improved surface finish when roughing or finishing. With an overall length 100 mm and cutting length 30 mm, the tool offers the reach required for shoulder operations while keeping the overhang low — a practical layout for optimised spindle stability and reduced vibration. Practical maintenance and compatible insert system Maintenance and insert changes are straightforward thanks to the Torx fastening system and standard screw dimensions. The tool uses a Torx key T6 and a retention screw M1.8x4.1, enabling quick and precise clamp replacement with common workshop tools. Designed for LNMU 0202 indexable inserts and compatible with Tungaloy cutting grades, the holder simplifies inventory management and allows shops to select insert grades that match specific materials and cutting conditions. The lightweight yet robust design (approx. 0.212 kg) supports efficient tool handling and fast cycle preparation. For technical advice or to secure the Teknik Cutting Tools S708TM shank milling cutter with internal coolant, contact Metav Werkzeuge GmbH in Emmerich for expert guidance and reliable supply. Technical data Article number: S708TM SKU: S708TM Eclass: 21180806 Description: Shank milling cutter for LNMU 0202 indexable inserts Numbers Diameter: 16 mm Shank diameter: 16 mm Overall length: 100 mm Cutting length: 30 mm Weight: 0.212 kg Flutes: 3 Torx key: T6 Special features For LNMU 0202 indexable inserts Compatible with Tungaloy inserts Internal coolant Torx screw M1.8x4.1 Manufacturer: Teknik Makina FAQ Which inserts fit this milling body? The S708TM accepts LNMU 0202 indexable inserts; compatible insert grades from Tungaloy are recommended depending on material and cutting strategy. Is the tool suitable for through‑coolant setups? Yes, the holder features internal coolant to direct fluid to the cutting edge and support higher cutting parameters. What is the maximum reach of the tool? The overall length is 100 mm with a cutting length of 30 mm, providing reach for shoulder milling while maintaining rigidity. How many flutes does the cutter have and why it matters? The tool has three flutes, offering a balance between chip evacuation and cutting edge engagement for improved surface finish. Which fastening components are required for insert changes? Insert retention uses a Torx T6 key and a M1.8x4.1 screw for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of high clamping stability and straightforward insert changes for uninterrupted production. The combination of a 16 mm shank and precise clamping with an M2.5x7 torx screw ensures repeatable set-up and low downtime — order the cutter via Metav Werkzeuge or contact our technical team for specification advice. Schaftfräser — shank milling cutter for LNMU 0303 indexable inserts, 16 mm shank (Teknik Makina) The Schaftfräser is a robust shank milling cutter designed for heavy-duty and precision milling operations, compatible with LNMU 0303 indexable inserts and intended for machining tasks that demand stable clamping and fast insert replacement Compatible with LNMU 0303 indexable inserts 16 mm shank diameter for secure clamping Two cutting edges for steady material removal Torx M2.5 clamping screw, T8 key specification Stability and machining performance for production work A solid toolholder with a 16 mm shank and 150 mm overall length offers improved rigidity compared with smaller holders, reducing vibration and runout during milling. The design with two cutting edges balances material removal and surface finish, making the cutter body suitable for both intermittent and continuous cuts. This stability translates into longer tool life for the inserts and more predictable cycle times on CNC milling centres. Fast insert changes and secure clamping reduce downtime The cutter is configured for LNMU 0303 indexable inserts, allowing straightforward replacement without complex realignment. The clamping uses an M2.5x7 torx screw, tightened with a T8 key, which simplifies maintenance procedures and keeps exchange times short. Clear torque practice and the compact screw size minimise the risk of incorrect clamping, so set-up can be completed reliably and repeatedly in production environments. Practical use in workshop environments As an indexable-insert milling body, the tool supports quick adaptability across jobs where insert geometry or grade may vary. The combination of a rigid shank and an insert-mounted cutting edge means less fixture rework and simpler inventory management: only the inserts need frequent replacement rather than whole cutters. For general workshop and jobbing contexts, this approach reduces capital tied up in tooling while keeping performance consistent. Quality and traceability for industrial procurement Supplied under Teknik Makina's designation and listed as SKU S671TM, the cutter body matches standard toolroom expectations for component identification and traceability. The clear specification of the insert type and clamping components supports integration into tool lists and maintenance schedules. Buying via an industrial partner like Metav ensures access to technical data, consistent stock handling and a centralised supply chain for rapid replenishment. Discuss the S671TM shank milling cutter with Metav Werkzeuge to confirm fitment and secure tooling that improves machining stability — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data SKU: S671TM Manufacturer: Teknik Makina Product designation: Schaftfräser for LNMU 0303 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Dimensions & core data Shank diameter: 16 mm Diameter: 16 mm Overall length: 150 mm Number of cutting edges: 2 Torx screw: M2.5x7 Torx key size: T8 Features Compatible insert type: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE Brand: Teknik Makina SKU identifier: S671TM FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; the tool body is specified for that insert form to ensure correct seating and cutting geometry. What clamping hardware is specified for insert retention? Insert retention uses an M2.5x7 torx clamping screw tightened with a T8 key as listed for the S671TM cutter body. Is the shank suitable for conventional collet chucks? The 16 mm shank is compatible with standard 16 mm collet or holder systems commonly used in milling centres; verify holder type for runout tolerances. Can the cutter be balanced for high-speed applications? Balancing depends on the assembled insert and holder; the S671TM body is designed for stable clamping, but final balancing should be performed according to machine and speed requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust milling solution that combines a 16 mm shank, internal coolant and compatibility with standard LNMX 0402 indexable inserts for predictable tool life and reduced downtime; order through Metav Werkzeuge or consult our specialists for tailored recommendations. 16 mm Shank Milling Cutter for LNMX 0402 Indexable Inserts — Internal Coolant (Teknik Makina) the 16 mm shank milling cutter for LNMX 0402 indexable inserts offers a compact tool body designed for secure insert clamping and consistent chip evacuation in medium-reach milling tasks Internal coolant for improved chip evacuation 16 mm shank for rigid clamping Compatible with Korloy LNMX 0402 inserts Four cutting edges for steady material removal High-stability machining for consistent productivity The milling body is engineered to deliver stable cutting performance: the combination of a 16 mm shank and four cutting edges reduces deflection and promotes even wear, which in turn lowers rework rates. The integrated internal coolant routes fluid directly to the cutting zone, improving chip control and temperature management so that the benefit is measurable in longer insert life and more predictable cycle times. This stability supports repeatable results on batch work without sacrificing setup simplicity. Fast insert changes and standardised clamping Maintenance and indexable-insert replacement are designed to be straightforward. The tool accepts LNMX 0402 indexable inserts and is specified for Korloy inserts in its seat geometry, while the fixing hardware is a T6 Torx screw sized M1.8x4.1 for secure, repeatable clamping. This standardisation reduces inventory complexity and enables quick swaps during scheduled stops, delivering a clear operational advantage in production environments that rely on short maintenance windows. Compact reach with balanced rigidity With a 150 mm overall length and an effective 80 mm cutting length, the tool body balances reach and stiffness for medium-reach milling tasks where machine accessibility and tool rigidity must be reconciled. The compact mass of 0.2 kg helps to limit centrifugal imbalance at higher spindle speeds, while the 16 mm shank diameter permits the use of common holders for straightforward integration into existing tool sets. The result is a versatile cutter that fits many workshop layouts without extensive holder changes. Low-maintenance design for dependable uptime Routine handling is simplified by a clear fastening system and accessible coolant channel; the design minimises the time needed for exchange and inspection. The S090TM milling cutter is produced with repeatable tolerances so that seat wear is predictable and insert life can be planned. Fewer unexpected interventions translate into steadier production and a reduced administrative burden when scheduling inserts and spare parts. For precise, insert-based milling with internal coolant, contact Metav Werkzeuge for ordering and application support for Teknik Makina tools — Metav Werkzeuge ships from Emmerich and can advise on holders and insert selection; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical data Article number: S090TM EClass: 21180806 Manufacturer: Teknik Makina Product type: Milling cutter (shank cutter) Facts Diameter: 16 mm Overall length: 150 mm Cutting length (shank/cutting): 80 mm Weight: 0.2 kg Number of cutting edges: 4 Torx key: T6 Torx screw: M1.8x4.1 Special features Internal coolant For LNMX 0402 indexable inserts Compatible insert manufacturer: Korloy SKU: S090TM Label: 16mm shank milling cutter LNMX 0402 L150mm with internal coolant FAQ Which indexable inserts fit this cutter? The cutter is designed for LNMX 0402 indexable inserts; Korloy inserts with matching seat geometry are compatible and recommended for correct fit and performance. How is coolant delivered to the cutting zone? Coolant is supplied via the tool body’s internal coolant channel, allowing direct flow to the insert pocket for improved chip evacuation and temperature control. How are inserts secured on the tool? Inserts are fastened with a T6 Torx screw (M1.8x4.1); the S090TM uses this standard fixing for repeatable clamp force and quick replacement. What machine and holder considerations apply for the 16 mm shank? A rigid holder suited to a 16 mm shank is advised to minimise runout; the tool’s 150 mm overall length and 80 mm cutting length should be matched to the machine’s spindle projection and workpiece setup. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tool that combines 16 mm rigidity, precise indexable-insert compatibility and through‑coolant performance for consistent milling results; the design reduces vibration and simplifies insert changes. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for LNMX 0603 indexable inserts — 16 mm shank, internal coolant (Teknik Makina) Shank milling cutter for LNMX 0603 indexable inserts designed for secure clamping and coolant-fed chip control in CNC milling applications 16 mm shank diameter and fitment Internal coolant supply to the cutting zone Compatible with LNMX 0603 indexable inserts Two cutting edges for stable cutting performance Rigidity and repeatability that keep cycles on schedule A compact tool body with a 16 mm shank and 150 mm overall length provides a balance between accessibility and stiffness. The relatively short head length of 50 mm cutting length and the presence of two cutting edges reduce chatter and produce a predictable chip pattern, which in turn supports consistent dimensioning and surface finish. For production environments this means fewer rejects and less rework, while setup times remain short thanks to the standard shank diameter that suits common collets and holders. Coolant-through design improves tool life and surface quality The internal coolant channel feeds lubricating fluid directly to the insert seat, aiding chip evacuation and heat control at the cutting zone. Direct coolant supply lowers cutting temperatures, which prolongs insert life and stabilises machining forces during prolonged cycles. Reduced thermal load also helps achieve a finer surface finish on workpieces and lowers the risk of built-up edge on the insert, an advantage for mixed-batch work where both consistency and uptime matter. Indexable insert compatibility for fast servicing Built to accept LNMX 0603 inserts and compatible with inserts from Korloy, the cutter uses a standard M3x7 clamping screw secured with a T8 Torx key for rapid changing. The use of a familiar insert format keeps tooling costs predictable and enables quick on-the-bench swaps without specialised fixtures. This modular approach separates the cutting edge from the body, allowing the component to be maintained or replaced independently, which supports lean inventories and faster tool turnaround. Integration into CNC workflows and workshop routines Weighing 0.19 kg and finished for straightforward mounting, the tool integrates into automated tool magazines and manual setups alike. Its geometry is aimed at general milling tasks where indexable inserts deliver economical performance: stable material removal, straightforward maintenance and compatibility with a wide range of common CNC toolholders. The overall package supports operational continuity and is suitable for machine shops prioritising repeatable results with low per-cutting-edge cost. For tailored technical advice on the Teknik Makina shank milling cutter and to confirm suitability for specific machining tasks, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com to request ordering support or application guidance. Technical Data Article number: S284-3TM Brand: Teknik Makina Product type: Shank milling cutter ECLASS: 21180806 Facts Diameter: 16 mm Overall length: 150 mm Cutting length (head): 50 mm Weight: 0.19 kg Cutting edges: 2 Special features Internal coolant supply Compatible with LNMX 0603 indexable inserts Compatible insert manufacturer: Korloy Clamping screw: M3x7 Torx key: T8 FAQ What insert type does this cutter accept? This cutter accepts LNMX 0603 indexable inserts; the geometry and pocket are designed for that insert format and compatible Korloy types. How is coolant delivered to the cutting zone? Coolant is supplied through the tool body via the internal channel, improving chip evacuation and temperature control at the insert seat. Which fastening hardware is required for insert changes? Insert clamping uses an M3x7 screw tightened with a T8 Torx key for secure and quick changes. Is the shank suitable for standard holders and collets? The 16 mm shank diameter matches common collets and holders, facilitating integration into existing tool setups. Can this tool be used for automated tool magazines? Yes, the compact dimensions and standard shank make it compatible with automated tool magazines and typical CNC toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine reliable compatibility with LNMX 0603 indexable inserts and a 16 mm shank for consistent performance in demanding milling tasks; benefit from secure Torx clamping and two effective cutting edges. Order the cutter directly via Metav Werkzeuge or consult our specialists for application support. Indexable End Mill S284TM for LNMX 0603 inserts — 16 mm shank, Teknik Makina The Indexable End Mill S284TM is an indexable insert cutter engineered for robust face and shoulder milling with LNMX 0603 inserts in industrial machining applications. *Compatible with LNMX 0603 indexable inserts *16 mm shank for standard toolholders *Two cutting edges for efficient material removal *M3x7 Torx screw; T8 key for secure clamping Consistent cutting performance and proven compatibility The cutter is built around the proven concept of an indexable insert system, allowing cost-effective edge changes while maintaining high process stability. With a 16 mm shank and an overall length of 110 mm, the tool provides a balanced combination of rigidity and reach for typical milling set-ups. The use of LNMX 0603 inserts supplied by Korloy ensures wide availability of grades and edge geometries, which translates into predictable tool life and controlled cutting forces. This configuration reduces machine downtime because inserts are rotated or replaced quickly, while the solid shank diameter supports repeatable concentricity in standard holders. Secure clamping and straightforward maintenance Retention is handled by a M3x7 Torx screw secured with a T8 key, a straightforward system that keeps the insert firmly seated under cutting loads. The simple screw clamping eliminates complex set-up routines and lowers the risk of improper seating, which supports consistent part quality. Because insert handling and screw torque are standardised, maintenance routines are faster and less error-prone, helping to keep production throughput steady when frequent insert changes are required in batch production or multi-shift operations. Designed for demanding machining with clear process benefits Featuring two cutting edges, this indexable end mill is configured for stable chip formation and efficient material removal on shoulders and faces. The limited number of active edges reduces cutting force peaks and simplifies chip management, especially in interrupted cuts or when machining tougher materials. The tool’s geometry and insert compatibility make it suitable for a range of tasks where a compromise between aggressiveness and surface finish is required, offering measurable gains in cycle time without sacrificing repeatability. Integration into the workshop and supply reliability As a component from Teknik Makina, the cutter fits into established tooling systems and procurement workflows. The S284TM is compatible with common toolholders that accept a 16 mm shank, simplifying inventory and reducing the need for specialised arbors. Sourcing through a trusted distributor provides quick access to replacement inserts and spare screws, ensuring that the machining cell remains productive. For buyers seeking dependable supply and technical guidance, this tool is positioned to minimise supplier-related risks while supporting sustained production. For tailored application advice or to secure supply of Teknik Makina indexable tooling, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — specialists are available to discuss tooling integration and insert grades for specific materials. Technical Data Article number: S284TM Manufacturer: Teknik Makina SKU: S284TM ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 16 mm Shank diameter (nominal): 16 mm Overall length: 110 mm Cutting edges: 2 Retention screw: M3x7 Torx key size: T8 Special features Compatible inserts: LNMX 0603 Compatible insert manufacturer: Korloy Product type: Indexable end mill / shank cutter Intended use: Demanding machining operations Title (shop): Schaftfräser for Korloy LNMX 0603 indexable inserts FAQ Which insert type fits this cutter? The cutter accepts LNMX 0603 indexable inserts; insert compatibility and edge options are specified for the S284TM indexable end mill by Teknik Makina. What shank size is required for the toolholder? A 16 mm shank holder is required; the S284TM is manufactured to match standard 16 mm toolholder interfaces. How many cutting edges does the tool have and what is the advantage? The tool features two cutting edges, which favour stable cutting and simplified chip control for shoulder and face milling tasks. Which screw and key are used for insert clamping? Insert clamping is via a M3x7 Torx screw tightened with a T8 key to ensure secure retention under load. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 16 mm shank, 90° cutting angle and compatibility with LNMX 1006 inserts for reliable square-shoulder milling; order the shank cutter LN096TM directly via Metav Werkzeuge or ask our consultants if needed. Shank cutter LN096TM — 16 mm shank, for LNMX indexable inserts by Teknik Makina Shank cutter LN096TM for accurate indexable-insert milling in workshop and production environments, designed for use with LNMX 1006 inserts. 16 mm shank diameter Compatible with LNMX 1006 inserts 90° cutting angle for square shoulders Torx T8 screw M3x7 retention High compatibility and secure insert retention for efficient tool changes The LN096TM is built as a robust shank cutter for indexable milling, accepting LNMX 1006 inserts (Korloy compatibility). The indexable-insert system separates cutting geometry from the tool body, enabling fast exchange of cutting edges without regrinding. A standard Torx T8 key engages the M3x7 clamping screw to secure the insert firmly, which reduces setup time and keeps the toolholder centred. The result is predictable repeatability and reduced downtime during insert replacement. Rigid, compact design for stable square-shoulder milling A 16 mm shank and compact overall length of 90 mm deliver stiffness that minimises vibration and runout during shoulder and face operations. The 90° cutting angle is optimised for producing perpendicular surfaces and precise step transitions, making the tool suitable where tight geometry control is required. The light mass (approximately 0.14 kg) supports quick acceleration on CNC spindles and helps to maintain surface finish without increasing tool overhang. Practical workshop integration and maintenance advantages This shank cutter supports straightforward workshop workflows: inserts are indexed rather than reground, clamping is achieved with widely available Torx tooling, and the single-cutting-edge arrangement simplifies cutting-force direction. The compact profile eases storage and holder compatibility across standard toolholders. For traceability in production, the SKU LN096TM identifies the tool precisely for reordering and toolroom records. For reliable square-shoulder milling from Teknik Makina and tailored advice on toolholder compatibility, contact Metav Werkzeuge — Metav’s consultants will recommend the right configuration and delivery options for your workshop. Technical data Article number: LN096TM Manufacturer: Teknik Makina Product: Shank cutter for indexable inserts Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Clamping screw: M3x7 Torx key: T8 ECLASS: 21180806 ETIM: EC011860 Core numerical data Shank diameter: 16 mm Cutting diameter: 16 mm Overall length: 90 mm Cutting angle: 90° Number of cutting edges: 1 Weight: 0.14 kg Designs and special features Indexable-insert system Torx T8 retention screw Single-cutting-edge configuration Compact shank for reduced overhang FAQ What inserts fit this shank cutter? The shank cutter accepts LNMX 1006 indexable inserts; compatibility is specified for Korloy LNMX 1006 types. Which key is required to change the insert? Insert retention is secured by an M3x7 screw tightened with a Torx T8 key for reliable clamping. Is the cutter suitable for shoulder milling? Yes, the 90° cutting angle and rigid 16 mm shank are designed to produce square shoulders with high geometric control. How is the tool identified for reorders? Use the SKU LN096TM and the Teknik Makina designation when reordering to ensure the same configuration and compatible inserts. Can the clamping screw be replaced with a different style? The tool uses a standard M3x7 Torx clamping screw; replacement with equivalent specification screws is possible to maintain correct clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precision of a compact 16 mm shank combined with internal coolant and proven compatibility with R390 11T3 indexable inserts for reliable milling cycles; order directly via Metav Werkzeuge or request tailored application advice from our specialists. Indexable Insert Shank Cutter S591-1TM — 16 mm shank, internal coolant (Teknik Makina) S591-1TM is a shank cutter body designed for indexable milling with R390 11T3 inserts, offering a compact footprint and internal coolant for controlled chip evacuation in industrial machining tasks 16 mm shank diameter for compact setups Internal coolant for improved chip evacuation Compatible with R390 11T3 Sandvik inserts 120 mm overall length, 40 mm cutting length Higher throughput through coolant-assisted chip control The combination of an integrated internal coolant channel and a two‑edge design promotes consistent chip evacuation, reducing heat at the cutting zone and enabling more stable feeds. This results in measurable improvements in cycle reliability and reduced frequency of unplanned tool changes. The internal cooling path directs coolant close to the cutting interface, which helps to preserve the insert edge and extend tool life under medium to heavy chip loads without compromising surface finish. Fast insert changes and secure clamping for production environments Designed specifically for R390 11T3 indexable inserts and compatible with common Sandvik cutter systems, the shank cutter uses a standard clamping screw M2.5×5.5 tightened with a T8 Torx key for repeatable, secure seating of the insert. The straightforward clamping concept shortens downtime during insert replacement and supports quick changeovers on the shop floor, making this cutter suitable for batch production where minimised non‑productive time is essential. Compact dimensions and balanced geometry for machine efficiency With a 16 mm shank, 120 mm overall length and a 40 mm cutting length, the tool body provides a compact solution for tighter tool magazines and reduced overhang, improving rigidity and vibration resistance. The two‑flute layout gives a balance between material removal rate and surface integrity, while the modest mass contributes to lower spindle load during high‑speed indexing. The S591‑1TM design focuses on operational stability and predictable performance in demanding milling tasks. For ordering, technical matching or application guidance on Teknik Makina indexable milling bodies such as the S591-1TM, contact Metav Werkzeuge in Emmerich for expert recommendations and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S591-1TM Manufacturer: Teknik Makina Product: Indexable insert shank cutter for R390 11T3 Facts Shank diameter: 16 mm Overall length: 120 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.181 kg Special features Internal coolant Compatible with R390 11T3 indexable inserts Clamping screw: M2.5×5.5 Torx key: T8 FAQ Which inserts fit this shank cutter? The cutter accepts R390 11T3 indexable inserts; it is manufactured for compatibility with Sandvik-style insert geometries as specified for the S591-1TM shank cutter. Is internal coolant required for reliable operation? Internal coolant improves performance and consistency; the S591-1TM is supplied with an internal coolant channel to support controlled coolant delivery to the cutting edge. What tooling is needed for insert changes? Insert clamping uses a M2.5×5.5 screw tightened with a T8 Torx key, allowing repeatable seating and straightforward exchange of inserts on the S591-1TM. Can the cutter be used in compact toolholders? Yes, the 16 mm shank and 120 mm overall length are suited to compact toolholders and reduced overhang applications where stiffness and rigidity are priorities. How does the two‑edge design affect machining? The two‑flute geometry provides a compromise between chip evacuation and cutting stability, supporting efficient material removal while maintaining surface quality with indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 16 x 16 mm shank rigidity and compatibility with 2C DGN indexable inserts to achieve consistent narrow-width grooves with reduced vibration and longer insert life; order the tool directly via Metav Werkzeuge or consult their specialists for integration into production processes. D727TM Parting Tool Holder by Teknik Makina — 16 x 16 mm shank, left-hand D727TM Parting Tool Holder is a left-hand parting and grooving tool holder engineered for precision narrow-width cuts in turning operations, designed to accept 2C DGN indexable inserts. 16 x 16 mm shank for rigid clamping Compatible with 2C DGN inserts (ISCAR) Left-hand cutting orientation for grooving Stable clamping for repeatable grooves A firm, vibration-resistant toolholder base is essential when working to tight tolerances. The square 16 x 16 mm shank provides a stable clamping platform that reduces chatter and improves surface finish, which in turn extends the life of the cutting edge. For production environments this means fewer tool changes and more predictable cycle times; the robust geometry translates directly into repeatable groove profiles and less rework on turned parts. Precision cutting for narrow-width operations Designed for narrow parting and grooving, this holder accommodates a 2 mm cutting width and a maximum grooving depth of 16 mm, enabling controlled material removal on delicate components. The left-hand orientation suits setups where the tool must engage from the left, and the holder’s compact form minimises overhang, improving rigidity at the cut. The result is efficient, accurate groove formation with minimal material wastage and consistent dimensional control across batches. The D727TM balances control and accessibility for tight-tolerance operations. Compatibility that saves setup time and stock complexity Compatibility with standard indexable inserts simplifies procurement and reduces storage complexity. The holder accepts 2C DGN inserts and is compatible with ISCAR insert grades, following an ISO designation of 1616, which allows easy matching of insert geometries and materials. With an overall length of 125 mm and a mass of 0.26 kg, the holder offers a practical reach without unnecessary bulk, making it straightforward to handle during tool changes and machine set-up while contributing minimal additional load to the turret. For workshops seeking a dependable left-hand grooving solution from Teknik Cutting Tools, contact Metav Werkzeuge for purchase and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into existing turning processes Technical data Article number: D727TM Eclass: 21181005 Manufacturer: Teknik Makina SKU: D727TM Facts Shank dimensions: 16 x 16 mm Cutting width: 2 mm Max grooving depth: 16 mm Overall length: 125 mm Weight: 0.26 kg Cutting direction: Left Special features Compatible inserts: 2C DGN Suitable for inserts by ISCAR ISO designation: 1616 Toolholder type: parting/grooving FAQ Which indexable inserts fit this holder? This holder accepts 2C DGN indexable inserts and is compatible with ISCAR insert types for the D727TM parting tool holder. What is the maximum grooving depth? The maximum grooving or parting depth for this holder is 16 mm, suitable for most standard narrow-width operations. What are the shank dimensions and form? Shank dimensions are 16 x 16 mm, square profile, providing rigid clamping and reduced vibration for consistent grooves. Is the holder suitable for left-hand operations only? Yes, the holder is specified for left-hand cutting orientation and is optimised for setups that require engagement from the left side. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 16 mm shank stability, a 4 mm cutting width for narrow grooves and a compact 125 mm overall length to maintain consistent parting cycles and reduced set-up times; order the holder via Metav Werkzeuge or request technical clarification from our consultants. Teknik Makina Parting and Grooving Toolholder D675TM — 16 mm shank, 4 mm cutting width A Teknik Makina Parting and Grooving Toolholder D675TM designed for right-hand cutting in lathe turning, compatible with 4C MGM inserts for reliable narrow-slot and parting operations 16 mm shank diameter for stable clamping 4 mm cutting width for narrow grooving Max plunge depth 18 mm for medium-depth cuts Compatible with Korloy 4C MGM inserts Stable clamping for reduced vibration and repeatable cuts The holder is engineered around a 16 mm shank, providing a firm mounting interface and improved rigidity during parting tasks. Its 125 mm overall length keeps the centre of mass close to the turret, which helps reduce chatter and maintain surface quality when removing narrow sections. With a mass of 0.273 kg, the component is light enough for rapid tool changes yet robust enough to preserve alignment under moderate cutting forces. These attributes combine to shorten set-up times and deliver consistent results across repetitive production batches. Precise narrow-slot capability with optimised insert fit Featuring a 4 mm cutting width, the toolholder is intended for tight-groove and parting applications where material removal must be controlled. The clamping design accepts 4C MGM style inserts and is specified as compatible with Korloy inserts, enabling readily available grades and geometries for chip control and edge life. The compact cutting width supports fine-turning operations and reduces material waste per cut, contributing to improved cycle efficiency and predictable component tolerances. Medium-depth capacity and right-hand operation for workshop versatility The holder provides a maximum plunge depth of 18 mm, suitable for many common parting and grooving tasks on medium-diameter workpieces. It is configured for right-hand cutting, matching standard turret orientations and simplifying process planning across conventional lathes. The item carries the ISO-related shank identification 1616, and the corresponding bar designation 4C-R MGM clarifies compatibility with established toolpost systems, minimising ambiguity at procurement and helping to lower inventory complexity. Easy integration and reliable everyday performance Designed for straightforward integration into production workflows, this toolholder balances compact dimensions with precise clamping to maintain edge stability and repeatability. The combination of a stable shank, controlled cutting width and clear insert compatibility reduces trial runs and supports faster qualification for new workpieces. For operations seeking dependable parting results and predictable tool life, the holder delivers practical performance with minimal fuss. Contact Metav Werkzeuge for personalised technical advice and prompt supply from Emmerich; request detailed specifications or an application match for the Teknik Makina D675TM parting and grooving toolholder. Technical data Article number: D675TM Manufacturer: Teknik Makina Designation: Parting and grooving toolholder (Stechklemmhalter) Facts Shank/head width: 16 mm Cutting width: 4 mm Max plunge depth: 18 mm Overall length: 125 mm Weight: 0.273 kg Cutting direction: right-hand Special features Compatible inserts: 4C MGM Compatible insert manufacturer: Korloy ISO designation: 1616 Toolholder bar designation: 4C-R MGM FAQ Which inserts fit this toolholder best? The toolholder accepts 4C MGM inserts; Korloy 4C MGM grades are stated as compatible for the Teknik Makina D675TM. Is the holder suitable for left-hand cutting? The holder is specified for right-hand cutting; left-hand applications require a mirror-design holder. What is the maximum machining depth for parting operations? Maximum plunge depth is 18 mm, which suits many medium-depth slotting and parting tasks with the D675TM. Which shank size should the turret accept for proper clamping? A 16 mm shank/head width is required for secure mounting of this holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust construction, precise clamping and a compact form factor for smooth grooving operations; order this holder through Metav Werkzeuge or contact our advisers for further information. Grooving clamping holder DGN (Teknik Makina) — 16 × 16 mm shank, ISCAR DGN 3C compatible The Grooving clamping holder DGN is a compact toolholder designed for precision grooving and parting tasks on CNC and conventional lathes, compatible with ISCAR DGN 3C indexable inserts. Compact 16 × 16 mm holder shank Compatible with ISCAR DGN 3C inserts Secure clamping with M4×10 socket screw 125 mm overall length, 0.23 kg weight Precise clamping for repeatable groove quality The holder provides precise clamping and consistent tool position thanks to its ISO 1616 designation and rigid construction. By accepting ISCAR DGN 3C indexable inserts, the unit enables repeatable groove profiles with minimal set-up variation, which reduces scrap and rework. This mechanical stability translates into measurable gains in part consistency and machine utilisation, making the component suitable for medium-precision production runs and workshop environments that demand predictable results. Fast set-up and secure fixing to reduce downtime A single M4×10 socket clamping screw combined with a T15 hex key allows safe and quick insert changes without complex adjustment. The straightforward clamping reduces cycle interruptions and supports efficient tool maintenance routines. The low mass and compact geometry ease handling during changeovers and contribute to shorter machine idle time, which supports a more economical production workflow while maintaining cutting-edge reliability. Compact design for access in confined toolpaths With a shank of 16 × 16 mm and an overall length of 125 mm, the holder is engineered to reach tight grooves and operate in limited clearance conditions. The 3 mm cutting width and 16 mm maximum cutting depth suit narrow grooving and light parting operations where controlled chip evacuation and operator accessibility are essential. The compact form factor helps integrate the holder into multi-tool turrets or small lathe setups without compromising rigidity. Clear compatibility and practical application notes Designed specifically for DGN 3C inserts, the clamping holder matches common grooving geometries and simplifies inventory management by aligning with established insert lines. The ISO-style 1616 designation denotes the standardised shank interface, enabling straightforward mounting in compatible toolposts or boring bars. For operations that require predictable insert seating and simple replacement, this holder provides a pragmatic solution that balances performance with workshop practicality. For reliable grooving performance and expert guidance on application, contact Metav Werkzeuge to request the Teknik Makina Grooving clamping holder DGN (SKU D022TM) and benefit from local advice and supply from Emmerich. Technical data Article number: D022TM Manufacturer: Teknik Makina Facts Shank width: 16 mm Shank height: 16 mm Cutting head width: 16.2 mm Overall length: 125 mm Total height: 16 mm Cutting width: 3 mm Max cutting depth: 16 mm Weight: 0.23 kg Features ISO designation: 1616 Compatible with ISCAR DGN 3C inserts Clamping screw: M4×10 Hex key size: T15 Bohrstangen designation: 3C DGN FAQ Which inserts fit this holder? The Grooving clamping holder DGN accepts ISCAR DGN 3C indexable inserts; the design ensures correct seating and repeatable geometry for grooving tasks. What are the key dimensions to check for machine compatibility? Important dimensions are the 16 × 16 mm shank and 125 mm overall length; confirm these match the toolpost or boring bar seat before mounting the DGN holder. How is the insert secured in the holder? The insert is clamped using an M4×10 socket screw; assembly and removal require a T15 hex key for reliable fixation and fast changeovers. Is this holder suitable for compact lathes or small turrets? The compact shank and 125 mm length make the holder well suited to confined toolpaths and smaller turret spaces where rigidity and access are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Technical Information: Order Number: U600TM Item: Indexable Drill usable with WCM- 0302 Indexable Inserts of Korloy Brand: Teknik Makina Numbers and Data: Diameter: 16mm Weight: 0.324kg Total length: 140mm Diameter Connection: 25mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Compact, stable clamping combined with a short 100 mm overall length and compatibility with DCMT 0702 indexable inserts ensures dependable turning performance; order the clamp holder directly via Metav Werkzeuge or speak with our consultants for application advice. Clamp holder SDACR-F (SDACR 1616) – right-hand holder for DCMT 0702 inserts by Teknik Makina A Clamp holder SDACR-F designed as a compact, right-hand turning tool holder for indexable DCMT 0702 inserts, offering a 90° cutting geometry for conventional external and light internal turning. Right-hand turning configuration Compatible with DCMT 0702 inserts 16 mm head width and height Compact overall length of 100 mm Consistent clamping for repeatable turning results The compact clamp holder is engineered to provide secure, repeatable clamping of DCMT 0702 indexable inserts, which reduces vibration and improves surface finish. With an ISO designation of SDACR 1616, the geometry is optimised for a 90° cutting angle, so tool engagement is predictable and chip flow is controlled. This configuration is particularly beneficial in batch production where repeatability and minimal setup time translate directly into higher throughput and lower scrap rates. Space-saving form and practical mounting for tight setups Designed with a modest overall length of 100 mm and a head dimension of 16 mm, the holder gives access where longer tooling would interfere. The holder is supplied in a right-hand configuration and is compatible with shank standard H07-F, allowing straightforward installation on many lathes and toolposts. At 0.207 kg, the unit minimises overhang-induced deflection, meaning cutters maintain cutting geometry more reliably under load — a decisive advantage in small-part machining and finishing passes. Clear compatibility and efficient indexable insert handling Compatibility with DCMT 0702 indexable inserts simplifies inventory and reduces tool-change complexity. The clamping concept secures the insert in the seat so that index changes are fast and repeatable, which supports shorter cycle times. As an ISO-conforming SDACR type, the holder integrates with existing insert stocks and toolholder systems, enabling a seamless transition in production lines and straightforward replacement of worn inserts without special adapters. Suitable for workshop and light industrial turning tasks The holder is aimed at workshops and light industrial users who require a robust, compact solution for external turning and light profiling. Its right-hand cutting orientation and 90° approach are ideal for standard turning tasks, deburring and finish operations where tool access is limited. The combination of compact size, precise seating and straightforward geometry offers a dependable baseline tool that helps maintain machine utilisation and reduces interruption during shift changes. For compact, reliable clamping in turning operations contact Metav Werkzeuge to discuss the Teknik Makina SDACR-F clamp holder, request technical clarification or confirm fitment for specific machine setups — Metav Werkzeuge is ready to assist from Emmerich. Technical data Article number: D438TM Manufacturer: Teknik Makina Product type: Clamp holder SDACR-F for DCMT indexable inserts ISO designation: SDACR 1616 Facts Overall length: 100 mm Head width: 16 mm Head height: 16 mm Weight: 0.207 kg Cutting angle: 90° Cutting direction: right Compatible inserts: DCMT 0702 Shank designation: H07-F eClass: 21181004 Special features Right-hand turning configuration Compact form for limited access ISO-compliant SDACR design For DCMT 0702 indexable inserts FAQ Which insert type fits this holder? The clamp holder SDACR-F is designed for DCMT 0702 indexable inserts and secures them in the SDACR 1616 seat for stable turning performance. Is the holder right- or left-hand oriented? This specific SDACR-F variant is a right-hand tool holder, intended for conventional right-hand turning operations. What are the key dimensions to check for machine compatibility? Important dimensions are an overall length of 100 mm, head width and height of 16 mm, and the shank/adapter reference H07-F for mounting considerations. Will the compact length improve rigidity? The reduced overall length of 100 mm and modest weight (0.207 kg) reduce overhang and help limit deflection compared with longer holders, improving rigidity in many turning setups. What ISO designation identifies this holder? The holder carries the ISO designation SDACR 1616, which clarifies its geometry and helps ensure correct pairing with compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, left‑hand clamping solution that combines precise fit for DCMT 0702 indexable inserts and a rigid 16 x 16 mm shank to keep turning operations stable; order the SDJCL 1616 clamping holder (D361TM) directly via Metav Werkzeuge or request guidance from our technical consultants. SDJCL 1616 clamping holder — left‑hand, for DCMT 0702 indexable inserts (Teknik Makina) SDJCL 1616 is a left‑hand clamping holder engineered for secure turning with DCMT 0702 indexable inserts in compact lathe and CNC setups Left-hand holder for DCMT 0702 inserts Shank 16 x 16 mm for secure clamping Overall length 100 mm with 93° cutting angle Stable left‑hand turning with proven insert compatibility The holder is designed for left‑hand cutting direction and accepts standard DCMT 0702 indexable inserts, enabling consistent edge engagement during left‑hand turning operations. The geometry with a 93° cutting angle supports neutral cutting forces for a range of finishing and semi‑finishing tasks; this reduces lateral motion and contributes to improved surface consistency. The clamping arrangement is optimised for repeatable insert seating so set‑up time is reduced and component tolerances are easier to maintain. Compact shank and rigid head for vibration control A square 16 x 16 mm shank and a 20 mm cutting‑head width provide a compact footprint while offering torsional resistance during interrupted cuts. The holder’s cutting height 18 mm aligns insert top‑land position for predictable toolpaths, and the modest weight 0.2 kg limits overhang inertia on small toolposts. Fast axial mounting is facilitated by a Torx screw specified as M2.5x5.5 with a T8 key, which secures the insert clamp and helps prevent screw cam‑out during torqueing. Practical benefits for workshop efficiency and inventory With an overall length of 100 mm, the toolholder fits many small to mid‑sized turning fixtures without requiring bespoke holders. The standardisation on DCMT inserts reduces the number of different spare inserts required in stock and simplifies changeovers. The holder’s concise design supports close‑quarter machining and is suitable where space is limited but precision remains essential. The component is supplied under Teknik Makina quality standards and carries the SKU D361TM for easy reordering. For reliable left‑hand turning choose the Teknik Makina SDJCL 1616 — contact Metav Werkzeuge in Emmerich for tailored technical advice and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D361TM Manufacturer: Teknik Makina ISO designation: SDJCL 1616 For inserts: DCMT 0702 Torx screw: M2.5x5.5 Numbers / Core technical data Shank width: 16 mm Shank height: 16 mm Head width: 20 mm Cutting height: 18 mm Overall length: 100 mm Weight: 0.2 kg Cutting angle: 93° Special features / Versions Left‑hand cutting direction Clamping screw key: T8 Toolholder designation: H07 Compatible with indexable turning inserts FAQ Is this holder compatible with standard DCMT inserts? Yes. The SDJCL 1616 clamping holder accepts DCMT 0702 indexable inserts and is prepared for standard seat geometry. What does left‑hand orientation mean for setup? Left‑hand orientation means the cutting edge faces and cuts towards the left when viewed from the spindle front; the holder is intended for left‑hand turning operations. Which screw and key secure the insert? The insert clamp is held with a M2.5x5.5 Torx screw; a T8 key is specified for correct torque and repeatable clamping. Can this holder be used on compact lathes? Yes. The 16 x 16 mm shank and 100 mm overall length make the holder suitable for compact lathe toolposts and smaller CNC turret stations. What are the dimensional references to check before ordering? Check shank size (16 x 16 mm), cutting height (18 mm) and head width (20 mm) to ensure alignment with the machine’s tool offset and turret capacity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak. No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of precise seating, left‑hand orientation and a compact 16 x 16 mm shank for reliable turning performance; order the component directly via Metav Werkzeuge or consult our specialists for application advice. DWLNL 1616 clamping toolholder (D328TM) — Left‑hand toolholder for WN-- 0604 indexable inserts, 95° cutting angle DWLNL 1616 clamping toolholder designed for left‑hand turning applications, accepting WN-- 0604 indexable inserts for controlled chip formation and consistent finish Left‑hand orientation for precision turning 16 x 16 mm shank for stable clamping Accepts WN-- 0604 indexable inserts 95° cutting angle for controlled chip flow Reliable clamping and precise insert seating for consistent turning The holder provides stable clamping through a compact 16 x 16 mm shank, combined with a cutting head width of 20 mm and a cutting height of 26 mm, which together reduce vibration and enable repeatable tool positioning. This construction transfers cutting forces efficiently into the toolpost, resulting in improved surface quality and more predictable insert wear. The ISO designation DWLNL 1616 indicates standardised geometry for easy replacement and consistent set‑up across the workshop, shortening changeover times and supporting uninterrupted production. Optimised geometry for left‑hand operations and controlled chip evacuation Designed for left‑hand cutting, the toolholder features a 95° cutting angle that promotes a stable engagement geometry and predictable chip flow when used with WN-- 0604 inserts. The combination of insert form and toolholder angle helps direct chips away from the workpiece and cutting edge, which assists in heat management and prolongs insert life. For operations where cutting direction and chip control determine process stability, this configuration provides a pragmatic balance between material removal rate and surface integrity. Seamless workshop integration and dependable handling for everyday use With an overall length of 100 mm and a weight of 0.229 kg, the holder integrates easily into standard tool stations and turning centres without requiring extensive fixture changes. Compatibility with H06‑designation boring bars supports straightforward retrofitting into existing setups. The compact dimensions make storage and handling simpler, while the measured build quality reduces the risk of unexpected downtime. When combined with a reliable supplier network, this component contributes to a more resilient production chain and predictable scheduling. Contact Metav Werkzeuge for personalised application advice and to arrange supply of the DWLNL 1616 clamping toolholder (SKU D328TM) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D328TM Manufacturer: Teknik Makina Designation: Klemmhalter / DWLN for WN-- Indexable Inserts ISO designation: DWLNL 1616 Suitable for inserts: WN-- 0604 Facts Shank width: 16 mm Holder height: 16 mm Cutting‑head width: 20 mm Cutting height: 26 mm Cutting angle: 95° Overall length: 100 mm Weight: 0.229 kg Special features Left‑hand cutting direction Compatible with H06 boring‑bar designation Accepts WN-- 0604 indexable inserts Compact, standardised DWLNL 1616 geometry FAQ What insert type is compatible with this toolholder? The toolholder accepts WN-- 0604 indexable inserts; the DWLNL 1616 geometry is matched to that insert size for correct seating and clamping. Is the holder suitable for left‑hand turning only? Yes, the toolholder is intended for left‑hand cutting; its geometry and 95° cutting angle are optimised for that orientation. What are the key dimensions to check for machine compatibility? Important measures include the 16 x 16 mm shank, the cutting height of 26 mm and the overall length of 100 mm; these determine clearance and toolpost compatibility. Which boring‑bar designation fits this holder? The component is compatible with the H06 boring‑bar designation, enabling straightforward integration into many standard set‑ups. Can the toolholder improve insert life and surface finish? By providing stable clamping and an optimised cutting angle, the holder helps reduce vibration and manage chips, which supports longer insert life and more consistent surface results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com