Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of internal coolant, precise RPMT 0803 insert compatibility and a compact 150 mm overall length to keep changeover times short and machining consistent; order the Teknik Makina shank milling cutter directly via Metav Werkzeuge or ask our consultants for tailored advice. Shank milling cutter for RPMT 0803 indexable inserts – 18 mm cutting diameter, internal coolant (Teknik Makina) Shank milling cutter for RPMT 0803 indexable inserts designed for stable pocketing and face milling in workshop and light industrial applications, with internal coolant supply and a compact shank form. Internal coolant for improved chip evacuation Compatible with RPMT 0803 indexable inserts 18 mm cutting diameter for stable cutting 35 mm cutting length for deeper engagement Fast insert clamping with T8 Torx access Higher throughput through stable geometry and coolant feed The compact 18 mm cutting diameter combined with a 16 mm shank delivers a balanced stiffness-to-size ratio that reduces vibration and improves surface finish in repetitive milling tasks. Integrated internal coolant channels support consistent coolant delivery directly to the cutting edge, which enhances chip evacuation and helps prolong insert life. These characteristics translate into measurable productivity gains on batch runs and shorter rework cycles when using RPMT-style indexable tooling. Easy, secure insert changes to reduce downtime Equipped for RPMT 0803 indexable inserts and secured by an M3x7 Torx screw accessible with a T8 key, the cutter enables quick, repeatable insert changes without complex tools. The two cutting edges provide clear indexing points and straightforward balancing for feed and speed adjustments. This straightforward clamping concept reduces tool-change times and supports reliable set-up in multi-shift environments. Compact build for versatile fixture and machine compatibility With an overall length of 150 mm and a dedicated 16 mm shank, the tool fits compact toolholders and smaller machining centres while still allowing a 35 mm effective cutting length for deeper passes. The compact mass (approx. 0.241 kg) eases toolholder balance requirements and simplifies tool management. Where space and rigidity are both constraints, this shank cutter offers a pragmatic compromise between reach and stability. Practical advantages in daily workshop use Compatibility with Korloy RPMT 0803 inserts ensures easy sourcing of replacement cutting edges and familiar insert geometries for standard finishing or roughing shares. The internal coolant not only improves thermal control but also supports cleaner chip flow for materials where chip control is critical. The modest number of cutting edges simplifies regrinding and replacement logistics while maintaining consistent chip removal behaviour. For reliable high-performance milling with internal coolant and proven RPMT compatibility, contact Metav Werkzeuge for ordering and expert technical advice on the Teknik Makina shank milling cutter R311-1TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks Technical data SKU: R311-1TM UID: R311-1TM ECLASS: 21180806 Label: 18mm shank milling cutter RPMT 0803 L150mm with internal coolant Core specifications Cutting diameter: 18 mm Shank diameter: 16 mm Overall length: 150 mm Cutting length (shank/edge): 35 mm Number of cutting edges: 2 Weight: 0.241 kg Features & compatibility Internal coolant: yes Compatible inserts: RPMT 0803 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key: T8 Manufacturer: Teknik Makina FAQ What insert type fits this cutter? The cutter accepts RPMT 0803 indexable inserts; Korloy-compatible RPMT 0803 grades are suitable for typical finishing and light roughing applications. Is internal coolant provided and how does it help? Yes — the tool features internal coolant delivery to the cutting zone, which improves chip evacuation and helps extend insert life under continuous machining. What are the main mounting dimensions to check on the toolholder? Key dimensions are the 16 mm shank and 150 mm overall length; these determine holder compatibility and reach for the Teknik Makina cutter R311-1TM. Which screw and key are required for insert clamping? Insert clamping uses an M3x7 Torx screw tightened with a T8 key, enabling quick and repeatable insert changes. How many cutting edges does the tool have and what is the effective cutting length? The tool has 2 cutting edges and an effective cutting length of 35 mm, suitable for deeper passes within the cutter’s diameter class. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining an 18 mm cutting diameter with internal coolant and compatibility for APKT 1003 indexable inserts, this TekniK milling cutter delivers coolant-fed, stable metal removal and straightforward insert changes; order directly via Metav Werkzeuge or consult our specialists for machining optimisation. 18 mm Shank Milling Cutter for APKT 1003 Indexable Inserts — L120 mm, internal coolant 18 mm shank milling cutter for coolant-fed milling with APKT 1003 indexable inserts, designed for stable, repeatable machining in series production and job-shop environments 18 mm cutter diameter Internal coolant for chip control Compatible with APKT 1003 inserts 16 mm shank and 45 mm cutting length Coolant-fed cutting for consistent chip control and tool life The combination of a dedicated internal coolant channel and a compact cutting geometry ensures effective chip evacuation directly at the cutting edge. Controlled coolant delivery reduces heat at the insert edge, which contributes to longer insert life and steadier cutting forces. This design is particularly useful when using APKT 1003 inserts in interrupted cuts or when optimising tool life in multi-shift production. Secure insert clamping and easy service for high uptime A robust clamping system with a Torx T8 drive and a M2.5x5.5 fastening screw simplifies insert changes and secures repeatable seating. With just two cutting edges and a short 45 mm cutting length, the tool supports rapid indexable insert swaps while maintaining balance and surface quality. These features reduce maintenance time and support uninterrupted production cycles in busy machine shops. Stiffness and stability from optimised shank geometry An 18 mm cutter diameter paired with a 16 mm shank provides a favourable rigidity-to-length ratio across the 120 mm overall length, reducing chatter and improving dimensional accuracy. The compact mass (approx. 0.191 kg) and the short overhang help maintain spindle load within safe limits, resulting in improved finish and extended insert intervals on both roughing and finishing passes. Practical suitability and shop-floor integration Engineered for use with Korloy-compatible APKT 1003 inserts, the tool suits a wide variety of milling tasks where indexable systems are preferred for economy and flexibility. It is aimed at production engineers and workshop managers seeking a coolant-fed, indexable solution that balances ease of maintenance with predictable performance. For complex setups, Metav Werkzeuge offers application advice and material-specific recommendations to ensure optimum results. Arrange a technical consultation with Metav Werkzeuge to match insert grades and cutting parameters to the machining task; contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised guidance Technical data Article number: S164-1TM SKU: S164-1TM Product type: Shank milling cutter Label: 18 mm shank milling cutter APKT 1003 L120mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 18 mm Shank diameter: 16 mm Overall length: 120 mm Cutting length: 45 mm Cutting edges: 2 Weight: 0.191 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant supply For APKT 1003 indexable inserts Compatible with Korloy inserts Manufacturer: Teknik Makina FAQ Which inserts are compatible with this cutter? The cutter accepts APKT 1003 indexable inserts and is specified to be compatible with Korloy insert grades; choose the insert geometry and grade appropriate for the workpiece material. Is the coolant supplied directly to the cutting edge? Yes — the tool features internal coolant routing that delivers fluid to the cutting zone, aiding chip control and thermal management during milling. What shank size is required for stable clamping? A 16 mm shank diameter is specified; firm clamping in a suitable 16 mm collet or chuck is recommended to preserve stiffness and accuracy. How long is the cutting section and how does this affect stability? The tool offers a 45 mm cutting length within a 120 mm overall length, which helps limit overhang and reduces the risk of chatter for improved surface finish. What fastener is used for insert clamping? Insert clamping uses a Torx T8 drive with an M2.5x5.5 fastening screw to ensure repeatable and secure insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust 18 mm cutting geometry combined with internal coolant and a 16 mm shank delivers consistent T‑slot production and reliable toolholder integration; the compact 110 mm overall length keeps setup simple. Order the T‑slot cutter directly via Metav Werkzeuge or ask our consultants if needed. T-slot cutter TKC148TM — 18 mm, internal coolant (Teknik Makina) A T‑slot cutter engineered for precision T‑slot milling with CCMT 0602 indexable inserts, suitable for CNC and manual milling setups 18 mm cutting diameter Internal coolant for direct cooling 16 mm shank for rigid clamping Accepts CCMT 0602 indexable inserts Consistent T‑slot accuracy for stable production The TKC148TM is built to provide predictable results in repetitive T‑slot machining. Its 18 mm diameter and two cutting edges ensure uniform material removal with each pass, while the 16 mm shank supports stable clamping in standard toolholders. Using CCMT 0602 indexable inserts means that cutting edges are replaceable rather than regrinded, reducing downtime and keeping process capability high. For production managers, this translates into fewer interruptions and a more constant surface geometry across batches. Improved cutting performance and extended tool life Integrated internal coolant feeds lubricant and coolant directly to the cutting zone, improving heat dissipation and chip evacuation. The result is reduced thermal wear on the insert and better chip control, which helps maintain cutting edge integrity over longer runs. The cutter’s 110 mm overall length with a 32 mm cutting length balances reach with rigidity, enabling access to deeper slots without compromising stability. These features combine to lower tooling costs per part and enhance throughput in mixed production environments. Practical handling, quick insert changes and workshop fit Maintenance and insert replacement are straightforward: the cutter uses a Torx fastening system (Torx T7 with screw M2.2x5) for secure and rapid insert clamping. The tool’s modest mass (approx. 0.148 kg) and standard 16 mm shank simplify handling and reduce vibration risk when paired with appropriate holders. For workshops needing straightforward integration, the cutter adapts well to typical milling machines and arbors, and the use of indexable inserts simplifies inventory management compared with solid cutters. For precise T‑slot milling with Teknik Makina quality, contact Metav Werkzeuge GmbH for TKC148TM availability and technical advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: TKC148TM Label: 18mm T‑Nut Fräser CCMT 0602 L110mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 18 mm Overall length: 110 mm Shank diameter: 16 mm Cutting length (blade): 32 mm Cutting edges: 2 Weight: 0.148 kg Special features Internal coolant: yes For CCMT 0602 indexable inserts Torx key: T7 Torx screw: M2.2x5 Product type: T‑slot cutter FAQ Which inserts are compatible with this cutter? The T‑slot cutter TKC148TM from Teknik Makina is designed for CCMT 0602 indexable inserts; these replaceable inserts simplify maintenance and keep machining consistent. Does the cutter provide internal coolant feed? Yes, the TKC148TM features internal coolant, which delivers coolant directly to the cutting zone to improve tool life and chip evacuation. How many cutting edges does the cutter have? The cutter has two cutting edges, offering a balance between cutting efficiency and surface finish for T‑slot operations. What shank diameter is required for the toolholder? A 16 mm shank is specified for the TKC148TM, ensuring stable clamping in standard 16 mm holders and arbors. Which fastening hardware is used for insert clamping? Insert clamping uses a Torx system; the cutter requires a T7 Torx key and uses screws sized M2.2x5 for secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a modular indexable design, precise Ø 18 mm cutting diameter and a robust 20 mm shank for steady clamping and efficient thread milling; order the tool directly via Metav Werkzeuge or consult our specialists for application-specific advice. Thread Milling Cutter DC206TM — for S12, S14, S21, S30 and S40 Indexable Inserts (Ø 18 mm, 20 mm shank) — Teknik Makina The Thread Milling Cutter DC206TM is a CNC-capable thread milling tool intended for industrial metalworking, optimised for indexable inserts and reliable multi-pass thread generation. Modular indexable design for cost-effective regrinds Suited to S12–S40 insert formats 20 mm shank for stable clamping Ø 18 mm diameter, 85 mm overall length Increased productivity through replaceable inserts and stable clamping The cutter combines a replaceable-insert concept with a substantial 20 mm shank, which improves spindle engagement and reduces vibration during thread generation. Using indexable inserts eliminates the need to regrind the whole tool, so maintenance downtimes are shorter and running costs are lowered. Designed for industrial environments, the modular construction supports consistent cycle times and predictable tool life, contributing directly to an efficient machining process and steady throughput. Broad compatibility reduces tool inventory and simplifies planning Compatibility with a range of insert sizes — S12, S14, S21, S30 and S40 — makes the cutter a flexible option across multiple thread tasks. The ability to accept several standard indexable insert formats minimises the variety of holders required in the tool crib and streamlines procurement. Where a specific insert geometry or grade is needed, the holder accepts standardised parts, enabling quick changeovers and straightforward inventory management without sacrificing cutting performance. Precise thread results and straightforward maintenance With a nominal Ø 18 mm cutting diameter and an overall length of 85 mm, the tool provides the necessary reach and stability for many threading applications. The use of indexable inserts allows for controlled cutting geometry and consistent thread form. Fasteners supplied with the tool use an M4x10 Torx screw tightened with a T15 key, enabling secure insert clamping and predictable torque application during maintenance. This configuration supports repeatable set-ups and reduces the risk of insert movement that might affect thread accuracy. Application advice for process planners and operators The cutter is suited to milling standard metric threads and can be integrated into conventional CNC cycles for interpolated or helical milling. When configuring machining strategies, prioritise reduced axial engagement and controlled radial passes to preserve insert life and maintain surface finish. The solid shank and indexable concept support higher feeds where chip evacuation is adequate; however, review coolant and chip removal arrangements for interrupted threads or deep internal features to avoid recutting chips. Contact Metav Werkzeuge for tailored advice on the Teknik Makina thread milling cutter DC206TM and to confirm insert grades or machine compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a specialist Technical data Article number: DC206TM Manufacturer: Teknik Makina Eclass: 21180805 ETIM: EC011860 Numerical data Diameter: 18 mm Overall length: 85 mm Shank diameter: 20 mm Design & features Suitable for indexable inserts: S12, S14, S21, S30, S40 Torx screw: M4x10 Torx key: T15 FAQ What insert types are compatible with the thread milling cutter? The cutter accepts standard indexable inserts in sizes S12, S14, S21, S30 and S40; S21 inserts are a common fit for the supplied holder configuration. Is the DC206TM suitable for production use on CNC machines? Yes, the DC206TM from Teknik Makina is designed for CNC thread milling and features a robust 20 mm shank and modular insert system for stable, repeatable production. Which fastener and key are provided for insert clamping? Insert clamping uses an M4x10 Torx screw and requires a T15 Torx key for secure tightening and maintenance. Can the cutter be used for internal and external threads? The cutter is intended for interpolated thread milling on typical external and internal applications; process parameters should be adjusted for chip evacuation and tool engagement. What advantages do indexable inserts offer with this tool? Indexable inserts allow for quick replacement, consistent cutting geometry and reduced downtime compared with solid-thread tools, improving overall cost-efficiency in batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Details: Item: Indexable Drill Brand: Teknik Makina Order Number: U313TM usable with SOMT 0703 Indexable Inserts of Taegutec Diameter: 19,5mm Total length: 135mm Diameter Connection: 25mm Weight: 0.33kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Reliable machining performance is ensured by compatibility with WCMX and CCMT 0602 indexable inserts and a precise Ø 19–23 mm working range; the M10 thread and compact 70 mm overall length support secure mounting in confined setups. Order directly via Metav Werkzeuge or request specialist advice from the technical team. TKB172TM Boring tool for WCMX and CCMT indexable inserts — Ø 19–23 mm, M10 thread (Teknik Makina) The TKB172TM is a compact boring tool designed for precision turning operations using WCMX and CCMT indexable inserts, intended for use where confined space and reliable insert clamping are required. Compatible with WCMX and CCMT inserts Diameter range 19–23 mm M10 thread for secure mounting Compact overall length 70 mm Stable chip control through standardised insert compatibility The compact boring bar offers consistent chip formation by accepting established indexable inserts, notably CCMT 0602, which are widely available and easy to replace. Because the tool uses standardised insert geometries, set-up times are reduced and tool inventory is simplified; this leads to lower tooling costs and faster job changeovers. The use of indexable cutting edges also means that only the insert needs replacing when wear occurs, preserving the integrity of the holder and ensuring repeatable cutting conditions for each operation. Secure mounting and access for tight workspaces With an M10 thread and a total length of 70 mm, the design focuses on secure attachment and minimised overhang. The limited overall length reduces leverage and deflection, providing greater rigidity and improved surface finish in bore and facing operations. A nominal diameter range of Ø 19–23 mm enables compatibility with a variety of machine tool interfaces and seatings, making the tool suitable for compact tool posts and turret installations where space is at a premium. Practical handling, quick replacement and workshop efficiency Weighing approximately 0.095 kg, the tool is easy to handle and quick to index during insert changes. The straightforward geometry supports standard workshop maintenance routines and limits downtime. For machinists less familiar with indexable systems: an indexable insert is a replaceable cutting tip that is clamped into the holder; once one edge is worn, the insert is rotated or replaced without removing the holder from the machine, which simplifies maintenance and keeps components aligned for accurate repeatability. For confident, compact boring operations choose Teknik Makina's TKB172TM and contact Metav Werkzeuge for specification support or to place an order — eMail info@metav-werkzeuge.com · Tel +49 2822 7131930 Technical data Article number: TKB172TM Name: Ausbohrwerkzeug for WCMX and CCMT Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 19–23 mm Thread: M10 Overall length: 70 mm Weight: 0.095 kg Special features Compatible insert size: CCMT 0602 Designed for WCMX and CCMT indexable inserts Compact design for confined setups FAQ What type of tool is the TKB172TM and what is it used for? The TKB172TM is a boring tool (boring bar) from Teknik Makina, designed for turning and boring operations that use indexable inserts such as WCMX and CCMT. Which insert size is compatible with this boring tool? Compatibility is specified for CCMT 0602 inserts; the holder also supports WCMX-style indexable inserts as indicated in the product description. What are the key dimensions to consider for installation? Key dimensions are a working diameter range of 19–23 mm, an M10 mounting thread and an overall length of 70 mm; the listed SKU is TKB172TM. Is the design suitable for operations in tight spaces? Yes, the compact overall length of 70 mm and a nominal diameter range of 19–23 mm make the tool appropriate for confined tool posts and tight turret clearances. How does the M10 thread affect clamping stability? The M10 thread provides a standardised, secure connection that reduces movement and vibration at the toolholder interface, contributing to improved surface finish and dimensional accuracy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure insert seat and straightforward compatibility to keep turning operations efficient; the cartridge combines precision fit and workshop durability for steady results. Order the part directly via Metav Werkzeuge or consult the technical team for application advice. Cartridge for Boring Tool 19-23 CCMT 0602 – precision insert seat by Teknik Makina Cartridge for Boring Tool 19-23 CCMT 0602 is a precision cartridge designed to accept indexable CCMT 0602 inserts and to mate with boring bars in the 19–23 mm range for reliable turning and finishing tasks. Precision insert seat for CCMT 0602 Fits 19–23 mm boring bar range Durable construction for workshop use OEM compatibility with Teknik Makina Secure seating for consistent cutting performance The cartridge provides a precision insert seat that stabilises the CCMT 0602 insert during cutting, reducing micro‑movement and improving dimensional repeatability. A securely seated insert lowers the risk of chatter and irregular wear, which contributes to consistent surface finish and predictable tool life. This stable mechanical interface is particularly valuable in series production where process reliability is a priority. Faster changeover through standardised fit Designed to match the 19–23 mm boring bar envelope, the cartridge simplifies tool exchanges and shortens set‑up time. The clear compatibility with indexable CCMT geometry enables quick replacement of worn seats or inserts without complex adjustment. Reduced downtime and faster machine restarts lead to more productive machining cycles and a leaner workflow in the workshop environment. Built for regular workshop use Manufactured to industry expectations, the cartridge offers durable workshop fitment that withstands routine handling and installation. As a component from Teknik Makina, it integrates with standard boring tool assemblies and supports everyday turning and finishing operations. Combined with a disciplined maintenance routine, the cartridge helps maintain cutting performance across multiple insert changes. Practical installation and inspection advice Installation requires correct seating of the insert and verification of clamping torque to ensure the cartridge functions as intended. Regular visual inspection for wear or deformation preserves tool integrity and machining quality. If application specifics or dimensional drawings are needed, Metav’s technical advisers provide further documentation and compatibility checks to support integration into existing setups. For availability, technical compatibility checks or bespoke advice on Teknik Makina cartridges, contact Metav Werkzeuge – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com; consultations are available from our Emmerich centre. Technical data Article number: KR098TM Designation: Kartusche (Cartridge) for Boring Tool 19-23 CCMT 0602 Manufacturer: Teknik Makina Numbers / Core technical data Boring range: 19–23 mm Compatible insert: CCMT 0602 Special features Suitable for boring tool 19–23 CCMT 0602 OEM-compatible cartridge Robust workshop fit FAQ What insert type does this cartridge accept? The cartridge accepts CCMT 0602 indexable inserts and is configured for the insert geometry associated with that designation. Which boring bar sizes are compatible with this cartridge? Compatibility is specified for a 19–23 mm boring bar range; the cartridge is intended for installations within that envelope. Is this a genuine Teknik Makina part and how is quality ensured? This is a Teknik Makina cartridge (SKU KR098TM); parts are distributed via Metav Werkzeuge, which acts as the responsible distributor to ensure quality and traceability. How often should the cartridge be inspected in workshop use? Inspection frequency depends on cycle time and cutting conditions; regular checks after insert changes are recommended to confirm seat integrity and clamping condition. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable design and precise dimensions to reduce tool change time and maintain consistent hole quality; the combination of a Ø 19.5 mm cutting diameter and a 25 mm shank ensures straightforward holder compatibility and stable clamping — order the tool directly via Metav Werkzeuge or consult our specialists for integration advice Indexable Insert Drill U149TM — Ø 19.5 mm, 25 mm shank | Teknik Makina An indexable insert drill designed for short- to medium-reach drilling in metalworking applications, combining a compact total length with a replaceable-insert concept for efficient throughput Ø 19.5 mm cutting diameter Fits Korloy WCM-0302 indexable inserts 25 mm shank, total length 134 mm Reliable holemaking through an indexable design The U149TM is built as an indexable insert drill that brings the advantage of fast insert changes and predictable chip control. With a 57 mm cutting length and a precisely defined Ø 19.5 mm diameter, the body enables consistent hole depth and form across batches, which reduces scrap rates and rework. The use of replaceable inserts delivers lower per‑hole tooling cost compared with single‑use solid drills; when an insert edge is spent, the cutting edge is exchanged quickly, restoring cutting performance with minimal downtime. This approach benefits production environments that require reproducible results under repeat cycles and contributes to a more economical tool lifecycle. Secure integration with standard holders for robust machining A 25 mm shank diameter and an effective 56 mm shank length provide a stable connection to common toolholders, improving runout stability and surface finish. Compatibility with Korloy WCM‑0302 inserts means the drill body can be stocked as a universal carrier while the cutting geometry is maintained through standard inserts — a practical inventory strategy for workshop managers. The moderate total length of 134 mm balances reach and rigidity, so the tool performs reliably in through‑hole and short blind‑hole operations without excessive vibration or tool deflection. Optimised dimensions that support efficient workflows The combination of 57 mm cutting length and a compact body reduces tool overhang and helps maintain concentricity during drilling cycles. At a weight of 0.34 kg, the component is easy to handle during set‑up and changeover while still offering sufficient mass for steady cutting. Because the design focuses on replaceable cutting elements, maintenance becomes a matter of swap and verify rather than full tool replacement, which simplifies toolroom logistics and shortens mean time to repair. The result is a measurable uplift in machine uptime and a smoother production flow. Practical choice for contract workshops and production lines Choosing an indexable solution such as this drill reduces tooling waste and supports repeatable quality — advantages that translate into improved throughput and stable cost per part. The body accepts established inserts, streamlines reconditioning procedures and aligns with existing cutting data from Korloy inserts, so technicians can apply proven parameter windows for feeds and speeds. For operations seeking dependable, adaptable drilling with limited stocking complexity, the tool provides a sensible middle ground between solid drills and larger modular systems. Select the Teknik Cutting Tools U149TM for dependable, easy‑to‑service drilling — contact Metav Werkzeuge in Emmerich for ordering or technical consultancy via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: U149TM Manufacturer: Teknik Makina Diameter: 19.5 mm Total length: 134 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.34 kg Special features Compatible inserts: WCM-0302 Compatible insert manufacturer: Korloy Indexable insert drill design SKU: U149TM FAQ What insert type does the drill use? The drill accepts WCM-0302 indexable inserts; the carrier is prepared for this insert geometry to ensure correct seating and chip flow. Is the shank size standard for common holders? Yes — the 25 mm shank is compatible with standard 25 mm holders, providing secure clamping for stable drilling performance. What is the maximum usable cutting length? The tool provides a 57 mm cutting length, suitable for short to medium-depth holes while maintaining stiffness and accuracy. Can this body be used with inserts from other manufacturers? The U149TM is specified for Korloy WCM-0302 inserts; alternative suppliers with identical insert geometry may fit but verification of siting and clearance is recommended before production use. How does the indexable concept reduce operating costs? By replacing only the worn insert rather than the entire drill, the carrier extends service life and lowers per‑part tooling expenditure while shortening downtime for changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise holemaking with a Ø 19.5 mm diameter and a rigid 25 mm shank for stable clamping and consistent cycle times; order the tool directly via Metav Werkzeuge or ask the technical consultants for application advice. Indexable insert drill U819-1TM — Ø 19.5 mm, 25 mm shank (Teknik Makina) The Indexable insert drill U819-1TM is a robust drill body designed for medium-duty CNC holemaking where repeatable accuracy and rapid insert changes are required Indexable design for SPMG 0602 inserts 19.5 mm diameter for medium drilling 25 mm shank with 56 mm gauge length 57 mm cutting length for deep holes Reliable machining performance for productive cycles The U819-1TM is engineered to deliver stable machining and predictable tool life. With a Ø 19.5 mm diameter and a 57 mm cutting length, the tool body supports longer engagement without compromising roundness, reducing the need for frequent tool changes. The robust 25 mm shank ensures secure clamping in standard toolholders, which translates into less runout and improved surface finish. Where process stability and repeatability are priorities, this drill body reduces cycle-time variance and supports consistent hole tolerances. Compatibility that simplifies tool planning and inventory Designed for indexable operation with SPMG 0602 inserts, the drill body integrates smoothly into existing insert assortments. Compatibility with insert manufacturers Taegutec and YG-1 allows procurement teams to use established suppliers and preferred grades without adapting machining data drastically. The combination of a standard insert seat and common insert formats reduces stock complexity and shortens changeover times on the shop floor, enabling quicker responses to varying batch sizes. Built for workshop reliability and easy maintenance The modular concept concentrates wear on the replaceable cutting plates, so the tool body stays serviceable for many insert cycles. At a weight of 0.33 kg and an overall length of 134 mm, the component is light enough for convenient handling yet sufficiently rigid for stable drilling in medium-duty applications. The accessible clamping and insert pocket design minimise downtime for insert changes and regrinding, while the clear dimensional specification supports straightforward integration into tool lists and work instructions. Order Teknik Makina's U819-1TM through Metav Werkzeuge for dependable integration into production tooling; Metav Werkzeuge's technical team can advise on insert grades, holder selection and process parameters — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: U819-1TM Manufacturer: Teknik Makina Product: Indexable insert drill Facts Diameter: 19.5 mm Overall length: 134 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.33 kg ECLASS: 21180201 Special features Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Indexable design for reduced tooling cost FAQ Which insert type fits this drill body? The drill body accepts SPMG 0602 inserts; compatible grades from Taegutec and YG-1 are commonly used with the U819-1TM. What are the key dimensions for holder selection? Shank diameter is 25 mm with a shank/gauge length of 56 mm and an overall length of 134 mm, which should be matched to the selected holder. How deep can this tool drill effectively? The tool offers a 57 mm cutting length, suitable for medium-depth holes while maintaining stability when clamped correctly. Is the drill body suitable for rapid insert changes? Yes — the indexable design concentrates wear on the inserts (SPMG 0602), enabling quick replacement and minimising downtime for maintenance. What is the product code for ordering and reference? Order or reference the component as U819-1TM, Teknik Makina indexable insert drill. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of high rigidity, broad insert compatibility and extended cutting reach to improve finish quality and reduce tool changes; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Boring tool for fine finishing – 190 mm diameter, for CCMT 09T3 (Teknik Makina) Boring tool for fine finishing designed for internal turning and fine internal profiling with standard CCMT 09T3 indexable inserts, suited to precision workshops and CNC turning centres. 190 mm nominal diameter Compatible with CCMT 09T3 inserts Overall length L220 mm Max cutting diameter 250 mm Stable rigidity for superior surface finish The design delivers stable rigidity across the machining span, which reduces chatter and improves surface quality on delicate internal profiles. With a 190 mm nominal diameter and a robust shank geometry, the tool maintains cutting conditions even when working close to the maximum cutting reach. This stability translates into fewer rejected parts and lower rework times, supporting a more predictable production flow for finishing operations. Efficient compatibility reduces tooling complexity Acceptance of CCMT 09T3 indexable inserts means broad availability of grades and edge geometries, enabling quick adaptation to varied materials and cutting conditions. The option to fit industry-standard inserts keeps consumable management simple and cost-effective; spare parts sourcing is straightforward and changeover times are short, making the tool a pragmatic choice for mixed-batch production and maintenance of consistent process parameters. Extended reach and cutting height for deep features With an overall length L220 mm and a cutting height of 150 mm, the boring bar is configured for applications that demand deeper internal access without compromising rigidity. The combination of length and a max cutting diameter of 250 mm allows finishing of bore sections and internal contours in a single setup where possible, reducing handling and aligning with lean machining strategies. The result is measurable time saving on multi-stage operations. Workshop-ready design and handling benefits The tool’s geometry and interface have been conceived for easy mounting in standard toolholders and for secure clamping on CNC lathes. Reduced set-up complexity and clear insert indexing support faster commissioning of jobs. Where process documentation is required, the tool’s compatibility with common industry inserts and the clear dimensional references simplify standard operating procedures and training for operators. For precise application guidance or to request a specification sheet for the Teknik Makina THB131TM, contact Metav Werkzeuge for tailored advice and procurement support. Technical Data Article number: THB131TM SKU: THB131TM ECLASS: 21041590 Label: 190mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 L220mm Data Nominal diameter: 190 mm Overall length: 220 mm Max cutting diameter: 250 mm Cutting height: 150 mm Special features Product type: Boring tool for fine finishing Compatible with: CCMT 09T3 indexable inserts Manufacturer: Teknik Makina UID: THB131TM FAQ What inserts are compatible with this boring tool? The boring tool accepts CCMT 09T3 indexable inserts; THB131TM is designed to fit the standard pocket and clamp for that insert geometry. Can this tool reach deep internal bores? Yes, with an overall length of L220 mm and a cutting height of 150 mm, the tool is intended for deeper internal finishing tasks while maintaining stability. Is the THB131TM suitable for CNC lathes? The design of the THB131TM supports mounting in common toolholders used on CNC turning centres and is optimised for machine-based finishing operations. How does use of CCMT 09T3 inserts benefit tool management? CCMT 09T3 inserts are widely available in multiple grades and chipformers, which simplifies stockkeeping and enables rapid adaptation to different workpiece materials. Where can further technical documentation be obtained? Detailed specification sheets and cutting data can be requested via Metav Werkzeuge; reference the Teknik Makina THB131TM when enquiring. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable drilling solution that combines a Ø 19 mm cutting diameter, a 25 mm shank for secure clamping and compatibility with SPMT 0602 inserts to keep tooling costs low and uptime high; order directly via Metav Werkzeuge or consult their specialists for application support. U016TM indexable drill – Ø 19 mm, SPMT 0602 compatible (Teknik Makina) The U016TM indexable drill is an insert-based drilling tool for precision holemaking in industrial machining, designed to accept SPMT 0602 inserts for economical tool life management Ø 19 mm cutting diameter SPMT 0602 insert system 25 mm shank diameter 57 mm cutting length, 134 mm overall Precision and repeatability for CNC production The body is engineered to deliver consistent hole geometry and stable machining under repeated cycles. With a Ø 19 mm cutting diameter and an effective cutting length of 57 mm, the tool supports accurate depth control while the 25 mm shank ensures reliable clamping in standard toolholders. These measurable specifications translate into predictable cycle times and repeatable results across batches, while the indexable insert concept allows the cutting edge to be renewed quickly without changing the whole tool body. Lower tooling costs and reduced downtime Using replaceable cutters means the economics of drilling change in favour of productivity: worn edges are exchanged instead of discarding the entire tool, which reduces consumable spend and shopfloor interruptions. The SPMT 0602 insert format is widely available and, when combined with a robust drill body, supports sustained production runs with shorter maintenance windows. The design is therefore suited to operations that prioritise throughput and cost control in repetitive holemaking tasks. Secure clamping and compact geometry for flexible integration The tool’s overall length of 134 mm and a shank length of 56 mm are balanced against a tool weight of 0.35 kg, offering a compact footprint and manageable mass for high-speed spindles. Compatibility with Korloy inserts is specified for the cutter interface, enabling straightforward procurement of cutting edges. The construction supports straightforward mounting and stable rotation, and the combination of dimensions promotes compatibility with common fixture and chucking systems used in modern machining centres. Serviceability, application advice and supply reliability Maintenance is simplified by the insert system: indexable cutters are replaced and secured with standard clamping screws, reducing operator training and minimising process variance. As a supplier, Metav Werkzeuge brings a quality‑focused supply chain and decades of expertise to the selection and delivery of tooling solutions, backed by a broad range of accessories and alternative insert options. The result is a practical tool choice for workshops and production environments that require dependable availability and technical guidance. For tailored technical advice on the Teknik Makina U016TM indexable drill and to arrange supply via Metav Werkzeuge, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt product and application support Technical data Article number: U016TM Manufacturer: Teknik Makina Brand: Teknik Makina Core specifications Diameter: 19 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 134 mm Weight: 0.35 kg Features & compatibility Compatible inserts: SPMT 0602 Compatible insert manufacturer: Korloy SKU: U016TM Indexable insert drill body FAQ What insert type does the tool accept? The tool is designed for SPMT 0602 indexable inserts, allowing simple replacement of cutting edges. Which shank diameter is specified for secure clamping? A 25 mm shank diameter is specified for robust clamping and compatibility with common toolholders. What are the main dimensions of the drill? Key dimensions are a 19 mm cutting diameter, 57 mm cutting length and 134 mm overall length. Is the U016TM compatible with Korloy inserts? Yes, the drill body is compatible with inserts from Korloy, as specified for the cutter interface. How heavy is the tool and what does that mean for spindle load? The tool weight is 0.35 kg, which keeps spindle load modest and aids in maintaining balance during rotation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a rigid 25 mm shank with a Ø 19 mm drill body and a 57 mm cutting length, this indexable solution offers stable, repeatable holemaking for CNC operations; order directly via Metav Werkzeuge or consult our application specialists for precise toolholder and insert pairing. Indexable Drill U312TM – Ø 19 mm, 57 mm cutting length (Teknik Makina) A compact, high-rigidity Indexable Drill U312TM engineered for CNC drilling with replaceable SOMT 0602 inserts Ø 19 mm diameter for standard hole sizes 57 mm effective cutting length 25 mm shank for secure clamping Compatible with Taegutec SOMT 0602 inserts Stable, measurable performance for CNC holemaking The design focuses on delivering consistent results in production environments where repeatability matters. The combination of a 25 mm shank and a balanced drill body reduces deflection under load, supporting accurate hole dimensions across runs. With an Ø 19 mm nominal diameter and a 57 mm cutting length, the tool provides a clear specification for fixture and holder selection, enabling predictable process parameters and easier integration into existing tool cycles. The indexable concept ensures that cutting geometry remains constant after each insert change, which aids process control and quality assurance. Fast service life management through indexable inserts Equipped for SOMT 0602 indexable inserts, this drill body minimises downtime by allowing quick index changes rather than complete tool replacement. The insert system supports efficient stock management and lower per-hole tooling costs when compared with solid-carbide alternatives, especially in batch production. Compatibility with Taegutec inserts ensures ready availability of turning and drilling grades, while the insert format supports straightforward orientation and clamping within the insert pocket. The result is a pragmatic balance between operational economy and machining performance. Practical rigour for shop-floor integration The overall length of 135 mm and a shank length of 56 mm permit secure mounting and sufficient overhang control in typical toolholders. Weighing 0.33 kg, the body is lightweight enough for rapid tool changes yet rigid enough to maintain stability during medium-depth drilling. Clear dimensional data—Ø 19 mm, 57 mm cutting length, 25 mm shank—simplifies the selection of collets, chucks or shrink-fit holders and reduces set-up time. For users seeking specification advice or confirmation of holder compatibility, Metav’s technical team provides pragmatic guidance rooted in decades of precision-supply experience. For procurement and technical pairing of Teknik Makina tools such as the U312TM, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholder selection, insert choice and delivery options Technical Data Article number: U312TM Designation: Indexable drill Manufacturer: Teknik Makina Core dimensions Diameter: 19 mm Overall length: 135 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.33 kg Features & compatibility Compatible inserts: SOMT 0602 Insert manufacturer: Taegutec Tool type: Indexable drill body FAQ Which inserts fit this drill? The U312TM is designed for SOMT 0602 indexable inserts; compatible grades from Taegutec are commonly used with this drill body. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter, the 56 mm shank length and the Ø 19 mm cutting diameter to ensure the toolholder accepts the U312TM and provides sufficient clamping length. How deep can this drill cut effectively? The effective cutting capacity is defined by the 57 mm cutting length; the overall length is 135 mm, which informs clamping and overhang considerations. Is this drill suitable for high-volume production? The indexable design with SOMT 0602 inserts supports economical insert changes and predictable repeatability, making it well suited to batch and series production where insert replacement is preferred over whole-tool change. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, repeatable holemaking thanks to the combination of a 19 mm cutting diameter, a 57 mm effective cutting length and secure 25 mm shank clamping; order the drill body directly via Metav Werkzeuge or contact the consultants for specification support. Drill Body U148TM – Indexable-insert drill body, Ø 19 mm (Teknik Makina) The Drill Body U148TM is an indexable-insert drill body engineered for production drilling with Korloy inserts, providing a compact overall length and a robust interface for repeatable performance across machining runs. Ø 19 mm cutting diameter Compatible with Korloy WCM-0302 inserts 57 mm effective cutting length 25 mm shank for secure clamping High repeatability through defined cutting geometry The U148TM is designed to deliver consistent hole quality by combining a precisely manufactured body with a clear cutting length of 57 mm. The fixed effective cutting length ensures repeatable depth control across batches, which reduces the need for constant re-measurement and shortens setup time. Built for indexable-insert operation, the body keeps the insert position stable so that each tool change restores the original geometry quickly, improving throughput in medium-length drilling tasks. Stable clamping and machine compatibility A 25 mm shank provides a substantial clamping diameter that minimises vibration and improves tool life when mounted correctly. With an overall length of 134 mm and a shank length of 56 mm, the component balances reach and stiffness for production machines and toolholders that accept a 25 mm interface. The modest mass (approx. 0.338 kg) helps maintain spindle balance while keeping centrifugal forces and heat generation within predictable ranges during typical rotational speeds. Optimised for indexable-insert economics Compatibility with Korloy WCM-0302 inserts lets workshops benefit from replaceable cutting edges rather than full-tool replacement, lowering long-term tooling costs and simplifying inventory management. The U148TM supports quick insert changes and consistent seating, which shortens downtime during maintenance and keeps productivity high. For operations that standardise on Korloy indexing systems, the drill body integrates with existing insert stocks and clamping practices. Practical handling and maintenance guidance The indexable design means maintenance is limited to periodic insert replacement, seat inspection and torque checks of the clamping screws; no complex regrinding is required. Correct torque and clean seat surfaces ensure the indexable-insert drill body maintains its positional accuracy after every change. For technical clarifications, insert selection or compatible holder recommendations, Metav Werkzeuge can provide targeted information and product matching assistance. For Tek nik Cutting Tools’ Drill Body U148TM, contact Metav Werkzeuge for order placement or technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility and application support Technical data Article number: U148TM Manufacturer: Teknik Makina Designation: Drill body (indexable insert) Compatible inserts: Korloy WCM-0302 Facts Diameter: 19 mm Effective cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 134 mm Weight: 0.338 kg eClass: 21180201 Special features For Korloy WCM-0302 indexable inserts Indexable-insert drill body for production drilling Robust 25 mm shank for secure clamping FAQ What inserts fit this drill body? The drill body U148TM (Teknik Makina, SKU U148TM) is compatible with Korloy WCM-0302 indexable inserts. What is the effective cutting length of the tool? The effective cutting length of the U148TM is 57 mm, which defines the repeatable depth for batch drilling operations. Which shank size is required for mounting? A 25 mm shank interface is required; the U148TM provides a 25 mm shank diameter for secure clamping in suitable toolholders. What is the overall length and how does that affect reach? The overall length is 134 mm; this balances reach and rigidity for common production setups while minimising deflection. How heavy is the tool and does that affect spindle balance? The tool weighs approximately 0.338 kg; its modest mass helps maintain spindle balance when installed according to manufacturer recommendations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, insert-compatible drilling solution that combines reliable chip control with straightforward tool replacement; the result is a measurable improvement in drilling uptime and predictable tool management. Order the component directly via Metav Werkzeuge or consult our specialists for integration advice. Indexable drill U919TM – 19 mm diameter, 25 mm shank (Teknik Makina) A robust indexable drill U919TM engineered for precision boremaking in metalworking and CNC machining applications. 19 mm cutting diameter Compatible with SPMG 0602 inserts 25 mm shank, 56 mm shank length Cutting length 38 mm, overall length 115 mm Stable clamping for consistent bore quality The solid-body design of the holder provides a secure interface between spindle and cutting edge, reducing runout and improving hole tolerances. With a 25 mm shank and 56 mm shank length, the tool achieves reliable spindle engagement that translates into repeatable concentricity and surface finish. The modest mass (approximately 0.329 kg) helps to keep tool inertia low, facilitating faster acceleration on CNC machines without compromising stability. Flexible insert compatibility reduces downtime Designed to accept SPMG 0602 indexable inserts and compatible with insert ranges from Taegutec and YG-1, the tool holder allows quick reconditioning of the cutting edge instead of replacing entire drills. This modular approach reduces per-hole tooling cost and shortens maintenance intervals. The use of standardised inserts supports rapid stocking and cross-compatibility across workshops seeking efficient tool change strategies. Optimised geometry for industrial throughput A 38 mm cutting length and 115 mm overall length balance rigidity with access for deep bore requirements, making the holder suitable for many common drilling tasks on lathes and milling centres. The tool’s geometry is selected to enable effective chip evacuation from the cutting zone while maintaining axial stiffness; this reduces the risk of chatter and helps maintain cycle times under production conditions. The configuration supports predictable tool life when combined with correct feed and speed settings. Reliability supported by Metav’s supply chain Sourcing through Metav Werkzeuge ensures access to a comprehensive stock and traceable logistics from Emmerich. Metav’s role as a quality filter for the European market and its broad product range make procurement straightforward for workshops and distributors alike. Backing from an established partner adds assurance in delivery consistency and product traceability during extended production runs. Contact Metav Werkzeuge for detailed integration guidance on the Teknik Makina indexable drill U919TM and to confirm compatibility with existing toolholders — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: U919TM Manufacturer: Teknik Makina Name: Indexable drill U919TM Diameter: 19 mm Cutting length: 38 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 115 mm Weight: 0.329 kg Compatible insert type: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Tool family: Indexable drill FAQ What insert size does the tool use? The indexable drill U919TM is designed for SPMG 0602 inserts; these enable straightforward edge changes and cost-effective tool upkeep. Which insert manufacturers are supported? The tool holder accepts inserts from Taegutec and YG-1, offering flexibility in sourcing replacement cutting edges. What clamping interface is provided on the shank? The U919TM features a 25 mm shank with a 56 mm shank length, suitable for standard 25 mm collet and holder systems that accept this diameter. How deep can the drill cut effectively? The drilling solution offers a 38 mm cutting length, which is intended for medium-depth bores while maintaining rigidity and chip control. Is the U919TM suitable for high-volume production? Yes; the indexable concept of the U919TM supports rapid insert changes and predictable maintenance cycles, making it a practical choice for repetitive production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise, productive holemaking with a 19 mm drilling diameter and a rigid 25 mm shank; the indexable design reduces downtime and stabilises cycle times. Order the U412TM through Metav Werkzeuge or consult the technical team for application-specific advice. Teknik Makina Indexable Drill Body U412TM — 19 mm, 25 mm shank The U412TM indexable drill body is engineered for economical, repeatable hole production using SOMT 0602 indexable inserts, suited to standard toolholders and production drilling applications. 19 mm drilling diameter 25 mm shank for stable clamping Compatible with SOMT 0602 inserts 76 mm cutting length, 154 mm overall length Stable, high-throughput drilling with reduced vibration The indexable drill body delivers a combination of rigidity and accessible servicing that supports steady production runs. Built with a 25 mm shank and an overall length of 154 mm, the tool is designed to reduce deflection at the cutting edge, which in turn improves hole tolerance and surface finish. For workshops that measure process efficiency, the solid construction and predictable runout characteristics translate into fewer rework cycles and more consistent component quality. Predictable running costs through an insert system Using SOMT 0602 indexable inserts allows fast, tool-free insert changes on the shop floor and straightforward inventory management. The insert system separates cutting geometry from the carrier body, so the cost of consumables is limited to replaceable inserts rather than whole tools. Compatibility with Taegutec insert variants broadens sourcing options and simplifies procurement, making the drill body an economical choice for repetitive drilling tasks. Simple integration into existing toolholders and fixtures The tool is specified with a 19 mm diameter and a 76 mm cutting length, while the shank length of 56 mm provides secure clamping in standard holders. At approximately 0.35 kg, the carrier balances mass for stability without imposing excessive load on spindles. For machine shops that require rapid changeovers, the dimension set supports common mounting practices and maintains concentricity across different setups. Quality supply and pragmatic service from Metav Sourcing through Metav ensures access to a broad stock range and a practical quality filter for the European market. The workflow advantage extends from clear availability to documentation and order handling at the Emmerich site; this supply chain stability supports uninterrupted production planning. For procurement managers seeking to consolidate suppliers, the combination of technical compatibility and dependable logistics reduces administrative overhead and risk. For procurement or technical queries about the Teknik Makina U412TM indexable drill body and its fit with existing processes, contact Metav Werkzeuge in Emmerich for tailored advice and stock information Technical data SKU: U412TM Manufacturer: Teknik Makina Designation: Indexable drill body Core data Diameter: 19 mm Overall length: 154 mm Cutting length: 76 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.35 kg Special features Compatible inserts: SOMT 0602 Compatible with Taegutec indexable inserts Indexable insert system for rapid insert exchange FAQ Which inserts fit the drill body? The U412TM indexable drill body accepts SOMT 0602 inserts; Taegutec equivalents can be used where compatible grades and geometries are specified. What is the shank diameter and how is it clamped? The carrier has a 25 mm shank, designed for secure clamping in standard holders to preserve concentricity and stability during drilling operations. What are the overall and cutting lengths? Overall length is 154 mm and cutting length is 76 mm, dimensions that suit common machining setups while offering sufficient reach for many through-hole applications. Is the U412TM suitable for high-volume production? Yes, the indexable system and robust shank design make the U412TM well suited to repetitive, high-volume drilling where swift insert replacement and stable running are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable machining performance is achieved with a 19 mm cutting diameter and a 25 mm shank that deliver consistent concentricity and secure clamping; compatible with SPMG 0602 inserts for fast indexable regrinds. Order directly via Metav Werkzeuge or contact the technical team for application advice. Indexable drill body U719TM — 19 mm diameter, SPMG 0602 compatible (Teknik Cutting Tools) The Indexable drill body U719TM is an insert-equipped drill body engineered for industrial drilling applications, offering repeatable hole quality and straightforward insert changes for production runs. 19 mm cutting diameter Compatible with SPMG 0602 inserts 25 mm solid shank for secure clamping 76 mm cutting length for deeper holes Higher throughput through stable engagement The U719TM’s 19 mm nominal diameter and 76 mm cutting length combine to support deeper-hole operations without sacrificing stability. The tool body geometry is designed to maintain concentricity during cutting, reducing chatter and rework. For production environments this translates to fewer scrap parts and more predictable cycle times, as the insert-and-body combination keeps the cutting forces well controlled and the tool life consistent. Fast indexable insert handling for short downtime Compatibility with SPMG 0602 inserts allows rapid insert replacement and minimal setup time. Insert-style drilling separates the cutting edge from the body, meaning that edge wear is addressed by swapping the insert rather than replacing the entire tool. This reduces inventory cost and simplifies maintenance while keeping machining windows shorter—beneficial for batch production and mixed-run series where machine uptime is critical. Shank design that ensures secure mounting A 25 mm shank diameter with a 56 mm effective shank length provides a secure interface with standard toolholders, supporting repeatable clamping force and precise axial alignment. Secure clamping lowers the risk of runout and supports higher feed rates where process stability is required. The mass and balance of the body (approx. 0.357 kg) are optimised to limit vibration while remaining easy to handle during tool changes. Practical application and tooling integration The U719TM is intended for integration into standard machining centre tool systems that accept a 25 mm shank and indexable-insert drill bodies. It is suitable for workshop and industrial settings that favour replaceable cutting geometry to reduce total tooling cost. For optimal results, match the SPMG 0602 insert grade and coating to the workpiece material and machining parameters; this combination determines surface finish and productivity more than the body alone. Contact Metav Werkzeuge for application guidance and availability of the Teknik Cutting Tools indexable drill body U719TM with 19 mm diameter and SPMG 0602 compatibility Technical data Article number: U719TM Name: Vollbohrer Manufacturer: Teknik Makina eClass: 21180201 Facts Diameter: 19 mm Overall length: 153 mm Cutting length: 76 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.357 kg Special features Compatible insert: SPMG 0602 Compatible with inserts from Taegutec and YG-1 Indexable insert design for fast edge replacement FAQ What insert type does this drill body use? The U719TM is designed for SPMG 0602 indexable inserts; choose the insert grade and coating to match the workpiece. Which manufacturers’ inserts are compatible? This drill body accepts Taegutec and YG-1 inserts that conform to the SPMG 0602 form. What shank size is required for mounting? A toolholder or chuck that accepts a 25 mm shank diameter and the indicated shank length is required for correct clamping. How deep can this tool drill in a single operation? The effective cutting length is 76 mm, which defines the maximum recommended depth for a single-pass hole with the installed insert. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise combination of a 19 mm drill diameter, a 95 mm cutting length and a 25 mm shank for consistent hole quality and quick insert changes; order the tool directly via Metav Werkzeuge or consult the team for machining compatibility. Indexable insert drill body U779TM — Ø 19 mm, 95 mm cutting length (Teknik Cutting Tools) Indexable insert drill body U779TM for industrial drilling operations where rapid insert changes and repeatable hole quality are required 19 mm drill diameter 95 mm cutting length 25 mm shank diameter Compatible with Korloy WCM-0302 inserts Precision performance for repeatable holes The indexable drill body is engineered to deliver consistent bore geometry across high volumes. With its Ø 19 mm body and a 95 mm cutting length, the tool provides stable support for the cutting edge and helps maintain concentricity through the full depth of cut. The modular insert system reduces tool change time: individual WCM-0302 inserts are replaced instead of the whole tool, lowering downtime and inventory cost. This design is particularly beneficial where reproducible tolerance adherence is required and where productivity gains come from reduced non-productive time. Robust connection and predictable handling A 25 mm shank diameter and a clamping length of 56 mm ensure a secure mechanical interface with standard tool holders, improving vibration damping and run-out stability. The relatively low mass of 0.397 kg contributes to balanced rotation and lowers spindle load without sacrificing rigidity. The tool’s overall length of 172 mm and the defined cutting section enable flexible set-ups on both vertical and horizontal machining centres. Compatibility with established insert geometries from Korloy simplifies procurement and replacement logistics for workshop planners. Indexable insert benefits and workshop efficiency Using an indexable system offers clear economic and operational advantages: insert rotation or replacement is faster than regrinding solid tools, cutting-edge geometries can be matched to different workpiece conditions, and overall tooling cost is reduced by replacing only wear parts. The body’s construction supports reliable chip control and repeatable clamping accuracy, which together improve first-pass yield. For purchasers seeking a pragmatic balance between performance and serviceability, this drill body integrates well into a consolidated tooling strategy that reduces supplier complexity while maintaining industrial standards. For technical checks, delivery options or to discuss toolholder compatibility, contact Metav Werkzeuge — their consultants provide pragmatic, workshop-focused advice and procurement support for Teknik Cutting Tools products Technical data Article number: U779TM Manufacturer: Teknik Makina Product: Indexable insert drill body (Vollbohrer) Facts Diameter: 19 mm Cutting length: 95 mm Total length: 172 mm Shank diameter: 25 mm Shank clamping length: 56 mm Weight: 0.397 kg Special features Compatible with Korloy WCM-0302 inserts Indexable-insert system for fast tool changes SKU for procurement: U779TM FAQ What inserts are compatible with this drill body? The drill body is compatible with Korloy WCM-0302 indexable inserts; the U779TM design accepts that insert geometry for straightforward replacement. How does the shank diameter affect machining performance? A 25 mm shank provides a rigid connection to the toolholder, improving run-out characteristics and helping the U779TM maintain hole accuracy over longer runs. Is the U779TM suitable for automated insert replacement workflows? Yes, the indexable design of the drill body supports rapid insert swaps and can be integrated into standard workshop maintenance cycles to keep machine uptime high. What information is required to confirm holder compatibility? Please provide toolholder clamping specifications and spindle interface details; Metav Werkzeuge can advise on holder match and setup for the U779TM drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable Ø 19 mm cutting diameter, 57 mm effective cutting length and a 25 mm shank for secure clamping and consistent chip control — ideal for productive CNC drilling. Order the Vollbohrer directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer (Indexable drill body) by Teknik Makina — Ø 19 mm, 25 mm shank The Vollbohrer is a precision indexable drill body designed for metalworking and CNC applications, offering a compact overall length and compatibility with common insert systems for efficient holemaking. Indexable insert SPMG 0602 compatible Ø 19 mm cutting diameter 57 mm cutting length for deep holes 25 mm shank for secure clamping Precise geometry for repeatable hole quality The Vollbohrer from Teknik Makina combines a rigid tool body with a defined cutting zone to deliver consistent hole tolerances and predictable run-out. With an effective cutting length of 57 mm and overall length of 134 mm, the tool is tailored for operations where stability and repeatability matter. The Ø 19 mm diameter provides a balance between stiffness and accessibility, while the 25 mm shank ensures secure clamping in standard toolholders. These dimensions translate directly into reduced vibration and a lower risk of accelerated insert wear, improving process reliability in batch and single-part production. Broad insert compatibility to reduce tooling costs Designed to accept SPMG 0602 indexable inserts, the drill body is compatible with insert ranges from Taegutec and YG-1, enabling flexible procurement and simple regrinding strategies. An indexable system separates the cutting geometry from the body: worn edges are replaced quickly without changing the toolholder, which shortens downtime and lowers per-hole costs. The ability to use widely available insert grades also allows optimisation for materials and cutting conditions, supporting productivity gains and a favourable cost-benefit ratio over conventional solid drills. Practical dimensions and handling for workshop efficiency With a shank length of 56 mm and a compact total length of 134 mm, the tool is easy to handle during tool changes and occupies little space in the magazine. The modest weight of 0.33 kg contributes to dynamic balance and reduces spindle load during acceleration phases. The indexable drill body simplifies maintenance: insert changes are rapid and clamping interfaces are straightforward, which benefits set-up times on multi-spindle or CNC machines. Clear identification of the insert type and compatible manufacturers helps planning for spares and reduces ordering complexity. Engineered for industrial metalworking workflows This indexable drill body suits a variety of machining scenarios where hole quality, uptime and repeatability are priorities. The compact form and insert-driven concept fit lean tooling strategies and make the component a pragmatic choice for workshops aiming to streamline tooling inventory. Its specification supports rational decision-making: known dimensions and standard insert compatibility lead to predictable machine cycles and simplified logistics, strengthening overall production planning. For technical clarification, insert recommendations or to discuss fitment of the Teknik Makina indexable drill body (Vollbohrer, SKU U819TM) to specific machines, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and ordering support. Technical data Article number: U819TM ECLASS: 21180201 Manufacturer: Teknik Makina Dimensions & weight Diameter: 19 mm Overall length: 134 mm Cutting length: 57 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.33 kg Features & compatibility Compatible insert: SPMG 0602 Compatible with Taegutec inserts Compatible with YG-1 inserts FAQ Which insert type does this drill body use? The Vollbohrer indexable drill body from Teknik Makina uses SPMG 0602 inserts; it is supplied as an indexable drill body (SKU U819TM) compatible with common insert grades. Can the tool be used with Taegutec or YG-1 inserts? Yes — the Teknik Makina Vollbohrer (SKU U819TM) is specified to accept inserts from Taegutec and YG-1, offering flexible sourcing and grade selection. What are the main dimensions to consider for clamping? Key dimensions for toolholding are the 25 mm shank diameter and 56 mm shank length; these figures apply to the Vollbohrer from Teknik Makina (SKU U819TM). Is this drill body suitable for deep-hole machining? The 57 mm cutting length and compact overall length of the Teknik Makina drill body (Vollbohrer, SKU U819TM) support deeper holemaking within its diameter class while maintaining rigidity. How does an indexable drill body reduce operating costs? By separating the tool body from replaceable inserts, the Teknik Makina Vollbohrer (SKU U819TM) allows rapid insert changes and use of optimised insert grades, lowering downtime and the per-hole tooling cost. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust solution that combines a 19 mm cutting diameter with a 25 mm shank for stable clamping and consistent hole quality; compatibility with Korloy WCM-0302 inserts reduces tooling downtime and keeps cycles running reliably — order directly via Metav Werkzeuge or consult the team for application advice. Indexable drill body (Vollbohrer) by Teknik Makina — 19 mm diameter, Korloy-compatible Indexable drill body for precision holemaking in machining centres and turning centres, designed to accept Korloy inserts for fast tool changes and consistent performance 19 mm cutting diameter Compatible with Korloy WCM-0302 inserts 25 mm shank for secure clamping 76 mm cutting length for deeper holes Consistent hole quality through stable geometry and insert system The combination of a 19 mm nominal diameter and a 25 mm shank delivers a stable toolholder interface that reduces chatter and supports repeatable results. As an indexable insert drill body, the design focuses on predictable cutting behaviour: the fixed cutting length of 76 mm and an overall length of 153 mm keep setups straightforward, while the lightweight construction (approx. 0.357 kg) minimises spindle load during prolonged cycles. These measurable attributes translate directly into lower scrap rates and fewer reworks, which is particularly relevant where production tolerances and throughput matter. Faster maintenance and reduced downtime with standard inserts Built to accept the WCM-0302 insert format from Korloy, this drill body simplifies service intervals and tool change routines. The indexable concept means the cutting edges can be refreshed in seconds without reclamping the entire tool, enabling quick restoration of cutting performance and shortening machine idle time. The standardised 25 mm shank ensures compatibility with common collet and chuck systems, supporting rapid tool swaps and reducing fixturing complexity in busy workshops. Practical workshop benefits: handling, life cycle and supply The unit’s compact mass and clear dimensional data make it easy to integrate into existing tool inventories: 153 mm overall length, 76 mm cutting length and the specified shank diameter allow planning for tool reach and clearance. The modular insert approach reduces long-term tooling costs because only the inserts require replacement rather than the whole body. Supplied as a precision-machined drill body, it supports consistent clamping and predictable tool life, contributing to smoother production planning and less unplanned maintenance. For reliable machining with Teknik Makina indexable drills, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply — eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: U606TM Manufacturer: Teknik Makina Diameter: 19 mm Overall length: 153 mm Cutting length: 76 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.357 kg Compatible insert type: WCM-0302 Compatible insert manufacturer: Korloy Indexable drill body SKU: U606TM FAQ What insert type does this drill body use? The drill body accepts WCM-0302 indexable inserts and is specified for inserts from Korloy, ensuring quick replacement and standardised tool management. Is the shank compatible with common toolholders? Yes, the 25 mm shank diameter is a common format and allows secure clamping in standard collets and chucks for stable machining. What are the key dimensions to check before setup? Verify the 19 mm cutting diameter, 76 mm cutting length and 153 mm overall length to ensure sufficient clearance and reach in the machine setup. How does the insert-based design affect workshop costs? Using replaceable inserts like WCM-0302 reduces long-term costs because only the cutting inserts are renewed; the drill body itself remains in service, lowering total cost of ownership. Which SKU and brand should be referenced when ordering? Reference SKU U606TM and the Teknik Makina indexable drill body when placing orders or requesting technical details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Data inconsistency detected: the field "material" specifies solid carbide while other entries (16 IR insert designation, E16R holder code and 16 mm shank) indicate an indexable‑insert holder; please verify the source data to ensure accuracy and consistency across all fields, as mismatched information could lead to errors in processing, manufacturing, or decision-making; it is essential to cross-check the details provided in the source documentation or database to confirm whether the "material" field is correct or if the other entries need to be updated to reflect the actual specifications of the tool or component in question.

Benefit from precise chamfering with the 1 mm chamfer mill and its compatibility with TCMT 1102 indexable inserts to reduce setup time and achieve consistent edge quality. The combination of a 20 mm shank and a 95.5 mm overall length delivers stable machining and smooth tool changes. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. 1mm Chamfer Mill for TCMT 1102 Indexable Inserts (Teknik Makina) — 20 mm shank, 45°/90° capability The 1mm Chamfer Mill for TCMT 1102 Indexable Inserts is a shank-mounted chamfer cutter engineered for creating precise 45° and 90° chamfers in metalworking applications, suitable for production and rework tasks Compatible with TCMT 1102 inserts 20 mm shank for secure clamping 95.5 mm overall length for extended reach Produces 45° and 90° chamfers Achieve repeatable edges and reduced deburring time The chamfer cutter is designed to produce a 1 mm chamfer with controlled geometry at 45° or 90°, which reduces manual finishing and ensures consistent assembly fits. Using indexable inserts (TCMT 1102) means the cutting edge is quickly replaceable when worn, maintaining process uptime. For users less familiar with insert technology: indexable inserts are replaceable carbide tips that allow the body to remain in use while restoring cutting performance in minutes, lowering toolholding costs over time. The result is fewer rejects and a measurable improvement in downstream assembly efficiency. Stable set-up for improved surface quality and tool life A 20 mm shank and 95.5 mm overall length provide a rigid connection to the machine spindle, reducing vibration and improving surface finish on chamfered edges. The tool’s geometry and single cutting edge offer predictable chip formation, which contributes to longer insert life and consistent cycle times. Where machine stiffness is limited, the robust shank diameter helps maintain dimensional accuracy across batches, supporting reliable serial production on lathes and milling centres. Efficient workshop workflows and lower operating costs With a maximum cutting diameter of 15.2 mm and a cutting length of 25 mm, the cutter is versatile for small to medium chamfer operations; the single cutting edge concept simplifies indexing and inventory for inserts. Fast insert retention via Torx T8 tools and M2.5x5.5 screws ensures quick servicing during shift changes. These practical details translate into less downtime and a clearer maintenance routine, making the tool an economical choice for job shops and production lines seeking predictable performance and quick changeovers. Practical compatibility and application guidance The chamfer mill suits a variety of metalworking tasks where precise edge preparation is required prior to welding, coating or assembly. Its compatibility with TCMT 1102 carbide inserts means users can select grades optimised for steel, stainless steel or non-ferrous materials, depending on the insert grade chosen. For integration into existing toolsets, the cutter’s form factor aligns with common holders and collet systems used in general machining, enabling straightforward adoption without the need for bespoke fixtures. For application support or to discuss lead times and suitable insert grades, contact Metav Werkzeuge — Metav’s specialists in precision tooling are available to advise on the Teknik Makina chamfer mill S343-1TM and its best uses in production. Technical Data Article number: S343-1TM Label: 1mm Fasenfräser TCMT 1102 L95,5mm Product type: Chamfer mill Manufacturer: Teknik Makina eClass: 21180806 Facts Chamfer size: 1 mm Maximum cutting diameter: 15.2 mm Shaft diameter: 20 mm Overall length: 95.5 mm Cutting length (shank): 25 mm Cutting edges: 1 Angles: 45°, 90° Weight: 0.141 kg Special features Compatible inserts: TCMT 1102 Torx key: T8 Torx screw: M2.5x5.5 Category: Shank end mills (Schaftfräser) FAQ What insert type does this chamfer mill accept? The chamfer mill accepts TCMT 1102 indexable inserts; Teknik Makina’s cutter is designed specifically for this insert family to ensure correct seating and cutting geometry (S343-1TM). Can the cutter produce both 45° and 90° chamfers? Yes, the cutter is configured for 45° and 90° chamfering operations, allowing flexibility for edge preparation tasks without changing the tool body. Which shank size is required for mounting? The tool features a 20 mm shank, so holders and collets rated for a 20 mm diameter are appropriate for secure clamping and optimal rigidity. Is this tool suitable for high-volume production? The combination of a robust shank, replaceable TCMT 1102 inserts and simple Torx fastenings makes the cutter suitable for production environments where quick insert changes and consistent quality are priorities. What cutting diameter and reach can be expected? Expect a maximum cutting diameter of 15.2 mm and an overall reach of 95.5 mm, with a cutting length of 25 mm, which supports a range of chamfering depths and small- to medium-sized components. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact design with exact fit for 2.5 mm hex fasteners and simple identification via SKU 25ALLENTM — combine precision, easy handling and reliable supply. Order directly through Metav Werkzeuge or consult our specialists for tailored advice. Allen key — 2.5 mm hex, Teknik Makina A Allen key for precise tightening and loosening of 2.5 mm hex fasteners, intended for routine workshop and maintenance tasks. Allen key 2.5 mm hex Lightweight at 0.1 kg SKU 25ALLENTM for ordering Consistent, measurable fit for small hex fasteners A compact hand tool that gives a defined contact geometry for 2.5 mm hex sockets, ensuring a snug fit and reduced cam‑out. The clear specification of 2.5 mm allows straightforward selection for metric assemblies and repeatable torque application with compatible tools. This factual clarity supports efficient procurement and reduces assembly errors, making the item a pragmatic choice where exact hex sizing is required. Minimal weight and simple handling for everyday use With a listed weight of 0.1 kg, the tool remains easy to handle and store without adding bulk to a technician’s kit. The low mass supports swift manual operation during repetitive tasks and keeps toolboxes lighter on the workbench. The emphasis on lightweight handling translates into reduced user fatigue during frequent adjustments, which is a tangible productivity benefit in fast‑paced workshop environments. Traceable ordering and inventory management The product is identifiable by SKU 25ALLENTM, enabling direct ordering and simplified stock control. Clear article identification speeds up reordering cycles and integrates with purchasing systems. Reliable itemisation supports predictable supply from established vendors and helps avoid downtime caused by unclear tool specification — a rational advantage for procurement teams seeking continuity. Reliability through clear specification and supplier proximity Sourced from Teknik Makina and offered via Metav’s distribution, the tool benefits from a transparent supply chain and a focus on accessible precision. The concise technical definition and straightforward classification make it easier to assess suitability for tasks that call for metric hex keys. Combined with Metav’s distribution centre in Emmerich, the arrangement offers practical reassurance about availability and consistency. For enquiries about Teknik Makina Allen keys or to request ordering information via Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist guidance and fast fulfilment Technical data Article number: 25ALLENTM Name: Allen key Brand: Teknik Makina Dimensions & weight Size: 2.5 mm hex Weight: 0.1 kg ECLASS: 21189290 Features & suitability Product type: Allen key (hex key) Intended use: hex fastener operations Identification: SKU 25ALLENTM FAQ What size hex does this tool fit? The tool is specified for 2.5 mm hex fasteners and is identified as an Allen key for that size. Which manufacturer supplies this Allen key? This Allen key is supplied by Teknik Makina and stocked under SKU 25ALLENTM for ordering and inventory purposes. Is the weight relevant for daily use? Yes — the listed weight of 0.1 kg indicates a lightweight hand tool suitable for frequent manual use without significant handling fatigue. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Specifications: Order Number: U151TM Item: Indexable Drill usable with WCM- 0402 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 20,5mm Weight: 0.36kg Total length: 139mm Diameter Connection: 25mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision, stable clamping and simple insert replacement to keep production running with minimal downtime; the compact design with a 25 mm shank and Ø 20.5 mm cutting diameter ensures reliable hole-making and easy integration into standard toolholders — order directly via Metav Werkzeuge or consult the technical team for application guidance. Indexable drill U315TM – Ø 20.5 mm, 25 mm shank by Teknik Makina Indexable drill U315TM is a purpose-built insert drill for medium-depth, high-repeatability holemaking in production environments, engineered for use with Taegutec SOMT 0703 inserts. Ø 20.5 mm cutting diameter 25 mm cylindrical shank Compatible with SOMT 0703 inserts 60 mm cutting length for deeper holes Consistent productivity through engineered geometry The U315TM is designed as an indexable drill that converts insert replacement into a rapid maintenance step rather than a full-tool change. With a 60 mm cutting length and a total length of 138 mm, the tool supports medium-deep holemaking while preserving rigidity thanks to its 25 mm shank. The combination of a defined cutting zone and standard shank diameter reduces vibration and improves tool life, which translates into fewer interruptions on the shop floor and a predictable production rhythm. For operations that value throughput, the drill’s configuration reduces cycle-time variability and supports stable hole tolerances. Less tooling complexity, greater operational flexibility Compatibility with Taegutec indexable systems and the specified SOMT 0703 insert format makes the tool an attractive option for shops aiming to rationalise their tooling inventory. Replacing worn inserts, rather than regrinding or replacing entire drills, lowers consumable costs and simplifies logistics. The drill’s Ø 20.5 mm diameter and standard clamping dimensions enable straightforward integration into many holders and adaptors, so the holder pool can be standardised and changeover routines accelerated. This results in a leaner toolroom and fewer interruptions during shifts. Repeatable hole quality with simplified upkeep The indexable concept delivers repeatable surface finish and concentricity without complex adjustments: when an edge degrades, the insert is indexed or swapped and machining resumes. The U315TM’s design concentrates wear on the removable cutting parts, reducing the need for specialist maintenance and enabling in-house teams to restore performance quickly. The tool’s moderate overall weight of 0.35 kg facilitates handling during set-up and reduces operator fatigue during multi-tool changes. Clear advantages include reduced downtime, predictable reconditioning, and stable process capability — key factors for consistent component quality. Contact Metav Werkzeuge for application advice and stock information on Teknik Makina indexable drills; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and fast delivery from Emmerich. Technical data Article number: U315TM Manufacturer: Teknik Makina Diameter: 20.5 mm Overall length: 138 mm Cutting length: 60 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.35 kg Compatible with Taegutec indexable inserts Insert type: SOMT 0703 Indexable drill design FAQ What insert type is required for this drill? The drill uses SOMT 0703 indexable inserts; it is designed to work with Taegutec-style inserts for quick replacement and consistent cutting performance. Which shank size is needed for clamping? A standard 25 mm cylindrical shank is specified for secure clamping in common toolholders and adaptors. Is this drill suitable for deep-hole applications? The tool provides a 60 mm cutting length and a total length of 138 mm, making it suitable for medium-depth holes where rigidity and repeatability are required. How does insert replacement affect uptime? Indexable inserts allow fast edge changes without removing the body from the spindle, so the U315TM reduces machine downtime compared with full-tool replacement. Can this drill be used across different materials? Material suitability depends on the chosen insert grade; the U315TM body is compatible with industry-standard inserts such as SOMT 0703, enabling versatile use when matched with appropriate insert geometry and grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com