Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of an indexable insert design, a rigid 25 mm shank and a 51 mm cutting length to maintain steady production with minimal downtime; order via Metav Werkzeuge or contact the consultants for technical advice. Vollbohrer — indexable insert drill, Ø17 mm, Taegutec-compatible Vollbohrer is an indexable insert drill designed for efficient holemaking with replaceable inserts, suitable for machining operations requiring stable clamping and consistent hole quality Indexable design for SOMT 0602 inserts Ø17 mm cutting diameter, 129 mm overall length 25 mm shank for secure clamping 51 mm cutting length for deep holes Higher productivity through indexable technology The indexable insert drill construction reduces interruption times because individual inserts are replaced instead of the whole tool, which translates into faster recovery after wear and lower circulating tool costs. With a Ø17 mm cutting diameter and 51 mm cutting length, this tool delivers consistent hole depth capability while the SOMT 0602 insert interface—compatible with Taegutec inserts—ensures predictable chip formation and simplified tooling logistics. The body geometry is engineered to maintain tool rigidity, so cycle times and process stability are supported by the component design. Machine-ready mounting and maintenance advantages A 25 mm shank provides secure clamping for common machine tool holders, while the 129 mm overall length and a 56 mm adapter length offer reach without excessive overhang. The lightweight nature (approx. 0.318 kg) reduces spindle load during rapid traverses and contributes to smoother acceleration. Insert replacement is straightforward; the indexable system allows quick access to the cutting edges and consistent alignment, reducing setup complexity. These mechanical characteristics combine to produce reliable repeatability in serial production runs and reduce cumulative process variation. Dependable supply and partner benefits for workshop integration Procurement through Metav Werkzeuge benefits from a centralised sourcing approach and a quality filter based in Emmerich. Metav’s offering is built to support industry and trade with an extensive product range and proven logistics: established trust from over 48,000 customers and a catalogue exceeding 250,000 items means reliable availability and streamlined replenishment. For operations that prioritise uptime and predictable performance, the combination of robust tool design and Metav’s steady supply chain supports continuous production and straightforward tool management. For availability, compatibility checks or to discuss tooling strategies with Metav Werkzeuge for the Teknik Cutting Tools indexable solution (SKU U308TM), contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U308TM Manufacturer: Teknik Makina Facts Diameter: 17 mm Cutting length: 51 mm Overall length: 129 mm Shank diameter: 25 mm Adapter/holding length: 56 mm Weight: 0.318 kg Special features Compatible insert type: SOMT 0602 Compatible insert manufacturer: Taegutec Indexable insert drill design Machine tool clamping with 25 mm shank FAQ Which insert type fits this indexable insert drill? The tool accepts SOMT 0602 indexable inserts; inserts from Taegutec are specified as compatible for this drill. What are the key dimensions for mounting? Mounting reference: 25 mm shank diameter, 56 mm adapter/holding length and 129 mm overall length. How deep can this drill cut in a single pass? The effective cutting length is 51 mm, which defines the maximum machined depth per engagement. Who manufactures the tool and what is the SKU? Manufactured by Teknik Cutting Tools; product marketed under SKU U308TM. Is replacement of cutting edges straightforward? Yes; the indexable concept with SOMT 0602 inserts allows fast insert changes and consistent re-seating for repeatable geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tool body that combines a 17 mm cutting diameter with an 85 mm cutting length for stable, repeatable holemaking; the 25 mm shank and 161 mm overall length give secure clamping and reach for most workshop fixtures — order directly via Metav Werkzeuge or consult our technical team for application matching. Vollbohrer — Solid drill with 17 mm diameter and Korloy insert compatibility (Teknik Makina) Vollbohrer designed as a precision metalworking drill body for workshop and CNC applications, compatible with Korloy indexable inserts for efficient production. 17 mm cutting diameter 85 mm usable cutting length 25 mm shank for rigid clamping Compatible with Korloy WCM-0302 inserts Improve machining reliability with consistent diameter control The compact design ensures consistent hole diameters throughout the tool life, thanks to the specified 17 mm nominal size and an effective 85 mm cutting length. In practice, a stable cutting length reduces runout and taper, which means fewer rework cycles and tighter tolerances on finished parts. For buyers unfamiliar with indexable systems: the tool body accepts replaceable cutting faces rather than requiring whole-tool replacement, so geometric accuracy is maintained while operating costs fall. Faster tool changes and reduced inventory through standard insert fit Compatibility with Korloy inserts of type WCM-0302 allows rapid insert swapping and leverages readily available grades from a major insert manufacturer. The use of indexable inserts simplifies tooling logistics — keeping a small stock of inserts covers many jobs without multiple complete cutters. This approach supports lean workshop management and shortens machine downtime during maintenance intervals. Rigid clamping and reach for secure, vibration-free cuts The 25 mm shank diameter and a shank engagement length of 56 mm provide a secure interface with collets or holders, improving stiffness under load. With an overall length of 161 mm and a lightweight body at 0.468 kg, the tool balances reach and stability to suit medium-reach drilling tasks on mills and machining centres. Reduced vibration not only improves surface finish but also extends insert life, yielding better long-term economy. Practical applications and recommended use cases This drill body is aimed at production and repair shops that require repeatable, indexable drilling solutions for a range of metalworking tasks. The combination of a standard 17 mm size, Korloy insert compatibility and a modest overall length makes the tool suitable for batch production, prototype work and fixtures where access is limited. For detailed application matching or material-specific recommendations, Metav Werkzeuge provides tailored advice and can supply the correct insert grades and holder options for the required machining conditions. Contact Metav Werkzeuge today to discuss Teknik Cutting Tools' 17 mm drill body (SKU U777TM), confirm Korloy WCM-0302 insert choice and request the technical documentation by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U777TM Manufacturer: Teknik Makina Product name: Vollbohrer ECLASS: 21180201 Core dimensions Diameter: 17 mm Cutting length: 85 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 161 mm Weight: 0.468 kg Compatibility and features Compatible inserts: WCM-0302 Insert manufacturer compatibility: Korloy Files: 62de7ec30aced56449540eb2, 62de7dd80aced56449540e82 Story trigger: vollbohrer FAQ What inserts fit this drill body? The drill body accepts Korloy inserts of type WCM-0302; matching grades should be chosen according to workpiece material and cutting conditions. Is the shank suitable for standard collet chucks? Yes, with a 25 mm shank diameter the tool is intended for secure clamping in common collets and holder systems used on milling machines and machining centres. What is the usable cutting length? The usable cutting length is 85 mm, which provides sufficient depth for most medium-reach drilling operations while maintaining stability. Which SKU should be referenced when ordering or requesting documentation? Reference SKU U777TM when enquiring about this drill body; Teknik Cutting Tools is the manufacturer listed for this item. Can this tool be used on a CNC lathe or only on milling machines? The tool body is primarily specified for stationary spindle applications such as milling machines and machining centres; suitability for turning centres depends on the machine setup and holder compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 17 mm cutting diameter, compatibility with RD-- 0702 indexable inserts and a robust 16 mm shank for reliable T-slot machining; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. T-nut cutter TKC174TM – 17 mm diameter, for RD-- 0702 indexable inserts (Teknik Makina) The T-nut cutter TKC174TM is a precision tool designed for machining T-slots with RD-- 0702 indexable inserts, optimised for both workshop and CNC environments. 17 mm cutting diameter Compatible with RD-- 0702 inserts 16 mm shank for stable clamping Two cutting edges for consistent finish Consistent compatibility with industry-standard inserts The cutter is engineered around the RD-- 0702 indexable inserts, ensuring straightforward integration with commonly stocked inserts for T-slot applications. This compatibility reduces spare-part complexity and shortens downtime during tool changes, as the insert type is widely available. The focus on established insert geometry guarantees repeatable results in series machining and supports efficient inventory management for production and maintenance teams. Stable clamping and accurate slot profiles With a 17 mm diameter and a 16 mm shank, the tool delivers concentricity and rigidity required for precise slot profiles. The two cutting edges provide balanced cutting forces and a consistent surface finish, helping to minimise vibration and tool deflection during operation. These characteristics translate into improved dimensional accuracy for T-slots and reduced secondary finishing work, which supports higher first-pass yield and lower processing costs. Designed for efficient handling and quick insert changes The cutter’s geometry and assembly use a retaining screw (M2.5x5.5) that is driven with a Torx T8 key, enabling rapid and secure insert replacement with common workshop tools. With an overall length of 120 mm and a shank cutting length of 20 mm, the design offers convenient access for maintenance while maintaining the reach needed for deeper T-slot operations. The modest weight of 0.172 kg makes the tool easy to handle during setup and reduces inertial loading on smaller spindles. Contact Metav Werkzeuge for supply details and technical advice on integrating the TKC174TM into production, with availability and delivery coordinated from our Emmerich hub Technical data SKU: TKC174TM Label: 17mm T-Nut Fräser RD-- 0702 L120mm Product type: T-nut cutter Manufacturer: Teknik Makina Dimensions & weights Cutting diameter: 17 mm Overall length: 120 mm Shank diameter: 16 mm Shank cutting length: 20 mm Cutting edges: 2 Weight: 0.172 kg Features & compatibility For RD-- 0702 indexable inserts Torx key required: T8 Fixing screw: M2.5x5.5 Brand: Teknik Makina FAQ Which inserts are compatible with this cutter? The cutter accepts RD-- 0702 indexable inserts; the TKC174TM is built around that insert geometry for reliable seating and predictable cutting results. What clamping size is required for the shank? The shank diameter is 16 mm, so a 16 mm collet or holder is appropriate for secure clamping and concentric operation. How are the inserts secured? Inserts are fixed with a M2.5x5.5 screw driven by a Torx T8 key, enabling quick insert changes and secure retention during machining. Is the tool suitable for CNC milling and manual machines? Yes, the cutter’s 16 mm shank and balanced two-edge design make it suitable for both CNC milling machines and workshop machining centres, depending on the machine’s spindle and clamping system. What are the key dimensions and weight for planning set-up? The cutter has a 17 mm cutting diameter, overall length of 120 mm, shank cutting length of 20 mm and weighs 0.172 kg, information useful for fixture design and spindle load calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise thread milling with a compact 17 mm cutting diameter and a robust 20 mm shank for stable machining. The secure Torx fastening (M2.5x7, T8) and compatibility with a wide range of indexable inserts ensure efficient changeovers and consistent thread quality. Order the unit directly via Metav Werkzeuge or ask our consultants for application advice. DC205TM Thread Milling Cutter — 17 mm diameter, 20 mm shank by Teknik Makina DC205TM is a thread milling cutter designed for machining threads with indexable inserts across a broad insert range for CNC applications Precision thread milling with indexable inserts 17 mm cutting diameter, 20 mm shank Secure Torx fastening M2.5x7, key T8 High-precision threading that increases process flexibility The thread milling concept used here enables flexible thread production on CNC machines with a single cutter body and replaceable indexable inserts. The compact 17 mm cutting diameter combined with a 20 mm shank offers a stable interface to the spindle while keeping tool overhang low, reducing vibration and improving thread accuracy. This approach reduces the need for multiple solid tools and supports quick adaptation to varying thread sizes without changing the machine setup. Fast insert changes and reliable clamping for uninterrupted production Designed for practical workshop operation, the cutter uses a standard Torx screw (M2.5x7) and T8 key to secure inserts, which simplifies maintenance and minimises downtime. The clamping arrangement provides consistent seat location and repeatable positioning of the replaceable cutting edges, translating into predictable tool life and easier inventory management. Quick, robust insert replacement contributes directly to improved uptime and a smoother production flow. Simple integration into existing tool systems and supply assurance Compatibility with a wide spectrum of indexable inserts (S12, S14, S21, S30 and S40) makes the cutter suitable for diverse machining strategies where modular tooling is preferred. The modular design supports cost-effective reconditioning of cutting geometry by replacing inserts rather than whole tools. For purchasing and logistical reliability, Metav Werkzeuge supplies controlled stock and technical advice, aligning product availability with pragmatic workshop needs. Request a technical consultation from Metav Werkzeuge to specify the Teknik Makina DC205TM thread milling cutter for the intended application and ensure optimal insert selection Technical data Article number: DC205TM Manufacturer: Teknik Makina SKU / UID: DC205TM Facts Diameter: 17 mm Overall length: 85 mm Shank diameter: 20 mm Compatible inserts: S12, S14, S21, S30, S40 Torx screw: M2.5x7 Torx key: T8 ECLASS: 21180805 ETIM: EC011860 Design & features Indexable inserts S14 indicated Compatibility with S12–S40 insert range Thread milling application FAQ Which insert sizes are compatible with this cutter? The DC205TM thread milling cutter is compatible with indexable inserts in the S12, S14, S21, S30 and S40 range, allowing flexible selection according to thread form and cutting conditions. What are the key dimensions for mounting the tool? Mounting requires a 20 mm shank interface and the cutter has a 17 mm cutting diameter with an overall length of 85 mm; these dimensions make the tool suitable for many standard CNC spindle interfaces. How are the inserts secured and which tool is needed? Inserts are secured by a Torx screw M2.5x7 using a T8 key; this provides repeatable clamping force and straightforward insert replacement in workshop conditions. Can this thread milling cutter replace tapping for certain applications? Yes, the modular cutter enables formable and non-formable thread production via milling strategies; it offers advantages where flexible thread pitch, interrupted surfaces or large blind holes make tapping impractical, and the DC205TM supports such scenarios with indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Data inconsistency detected for SKU TKC096TM (manufacturer: Teknik Makina). The specification for compatible indexable inserts is contradictory: one field indicates compatibility with CCMT 0602 inserts, while the product description text states compatibility with CCMT 09T3 inserts. These two insert designations refer to different insert sizes and geometries and cannot both be assumed correct. Because of this conflict, a reliable, production-ready product description cannot be generated. Please confirm which insert type is correct (CCMT 0602 or CCMT 09T3) or provide the definitive technical specification for the cutter’s insert pocket and seat. Once the correct insert compatibility is supplied, a complete, standards-compliant product text with full technical details, benefits and Metav Werkzeuge commercial information will be produced.

Take advantage of a tool that pairs solid mechanical values — Ø 18.5 mm cutting diameter and a 25 mm shank — with compatibility for Korloy indexable inserts, ensuring economical insert changes and consistent clamping in production. Order the component directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina U147TM indexable insert drill body — 18.5 mm diameter, 25 mm shank The U147TM is an indexable insert drill body engineered for use with WCM-0302 inserts from Korloy; designed to fit standard 25 mm toolholders and deliver consistent cutting engagement across its 54 mm cutting length. Indexable with WCM‑0302 inserts 25 mm shank for standard toolholders Ø 18.5 mm cutting diameter Consistent dimensions for repeatable machining The tool’s Ø 18.5 mm cutting diameter combined with a 54 mm cutting length and 131 mm overall length gives predictable engagement in interrupted and continuous drilling cycles. These measurable dimensions support process planning and tool-change schedules: the fixed 25 mm shank ensures secure clamping forces, reducing runout and enhancing hole quality. For production planners, these specifications simplify fixture and holder selection and make cycle times more reliable. Fast indexable system for lower operating costs Designed to accept WCM-0302 inserts and compatible with Korloy insert geometry, the drill body reduces the need for full-tool replacement. The modular approach lets workshop staff replace only the worn insert, which shortens downtime and lowers consumable costs. Clear specification of the insert type supports procurement and inventory control, while straightforward insert indexing keeps maintenance tasks efficient. Integration into machining workflows and handling With a 25 mm shank and a shank length of 56 mm, the component fits common collet and chuck systems used in milling and drilling centres. The relatively low mass (0.348 kg) aids handling and balancing during changeovers. The solid specification and standard interfaces allow easy documentation in tool lists and tool-management software, helping maintain traceability and predictable performance across batches. Contact Metav Werkzeuge for personalised supply and technical guidance on Teknik Cutting Tools indexable drill bodies such as the U147TM; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: U147TM Manufacturer: Teknik Makina Designation: Vollbohrer Facts Diameter: 18.5 mm Overall length: 131 mm Shank diameter: 25 mm Cutting length: 54 mm Shank length: 56 mm Weight: 0.348 kg Special features Compatible with Korloy inserts Insert type: WCM-0302 Suitable for indexable insert drilling applications FAQ What insert type does this drill body accept? The drill body accepts WCM-0302 indexable inserts; this insert designation is specified for the U147TM to ensure correct seating and cutting geometry. Is the shank compatible with standard toolholders? Yes, the 25 mm shank is intended for standard collets and chucks commonly used in machining centres, providing secure clamping for the U147TM drill body. What are the key dimensions to consider when planning a tool set? Important dimensions are the Ø 18.5 mm cutting diameter, 54 mm cutting length and 131 mm overall length; these figures guide holder selection and tool-length offsets for the U147TM. Can this tool be used with Korloy inserts specifically? The component is specified as compatible with Korloy inserts and the WCM-0302 geometry, making Korloy a suitable supplier for replacement inserts. How does the indexable design affect workshop economics? Indexable designs like this drill body reduce consumable costs by allowing insert replacement only, not full-tool replacement, which lowers operating expenses and shortens maintenance intervals. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust drill body that combines quick insert replacement with consistent hole quality; its Ø 18.5 mm nominal diameter and compatibility with SOMT 0602 inserts make it a practical choice for efficient production. Order through Metav Werkzeuge or request technical clarification from our consultants if required. Indexable Drill Body U311TM (Ø 18.5 mm) – 25 mm shank, SOMT 0602 compatible (Teknik Makina) The Indexable Drill Body U311TM provides a compact, replaceable-insert solution for precision holemaking in CNC environments, designed to accept SOMT 0602 indexable inserts and to integrate into standard toolholding systems Ø 18.5 mm nominal diameter 25 mm cylindrical shank for secure clamping Accepts SOMT 0602 indexable inserts Effective cutting length 54 mm, overall 132 mm High-throughput drilling with predictable results The U311TM is engineered as an indexable drill body that focuses on production efficiency. With a Ø 18.5 mm cutting diameter and an effective cutting length of 54 mm, the body provides a clear balance between reach and rigidity. The indexable concept means only the insert is changed when the cutting edge wears, which reduces tool change time and lowers per-hole tooling cost. In practice, this translates into shorter cycle times and a more consistent process window on repetitive holemaking tasks. Stiffness and repeatability for accurate hole geometry A 25 mm shank and 56 mm shank length deliver the mechanical stability needed for repeatable results over long production runs. The 132 mm overall length and modest mass (0.327 kg) help to limit overhang while keeping the assembly manageable for quick set-up. The combination of a stout shank and compact body reduces runout and vibration, so concentricity and hole cylindricity are preserved—important where hole tolerance and surface finish affect downstream assembly or gauging. Insert-based design reduces downtime and inventory needs Compatibility with SOMT 0602 indexable inserts and recognised insert vendors such as Taegutec allows pragmatic stock planning: a small range of inserts can cover many bodies, and worn inserts are replaced in seconds. The indexable insert system also separates the cutting geometry from the body, enabling swift adaptation of insert grades and geometries to suit machining conditions without replacing the entire tool body. For maintenance teams this means fewer spare bodies, faster turnarounds and lower lifecycle cost per hole. Ready for integration into workshop toolrooms and production lines The body’s standard shank diameter and sensible overall proportions make it straightforward to mount in common toolholders and adaptors used in CNC drilling and milling centres. As a production-oriented component, it fits well into tool management systems where tool life and predictable replacement intervals are planned. Metav’s role as a quality filter for the European market ensures consistent supply and traceable sourcing for machining operations that prioritise availability and dependable technical specification. Contact Metav Werkzeuge to confirm tooling compatibility and secure U311TM drill bodies for production setups Technical data Article number: U311TM Brand: Teknik Makina Type: Indexable drill body Dimensions & core data Nominal diameter: 18.5 mm Overall length: 132 mm Effective cutting length: 54 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.327 kg Features & compatibility Accepts indexable inserts: SOMT 0602 Compatible insert manufacturer: Taegutec Indexable insert system for reduced tool change time FAQ What insert size is required for this drill body? The drill body accepts SOMT 0602 indexable inserts; U311TM is designed around that insert footprint to ensure correct seating and secure clamping. Can the U311TM be used in standard CNC toolholders? Yes. The 25 mm shank and standard overall geometry allow the U311TM to be mounted in common CNC toolholders suited for cylindrical shanks. How does an indexable drill body save costs compared with solid drills? By separating the cutting edge from the body, worn inserts are replaced instead of the entire tool; with U311TM this reduces downtime and lowers per-hole tooling expenditure. Is this drill body suitable for heavy-duty applications? The U311TM’s compact design, stout shank and short overhang make it suitable for production drilling where stability and repeatability are required; final suitability depends on the specific machining parameters and holder arrangement. How long is the cutting edge available on the tool? The tool provides an effective cutting length of 54 mm with an overall length of 132 mm, giving a balance between reach and rigidity for most through-hole and short blind-hole operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise diameter control, a secure 25 mm shank and proven compatibility with SPMG 0602 indexable inserts to keep production flowing with minimal interruption; order directly via Metav Werkzeuge or consult our technical team for application-specific advice. Solid drill U818-1TM – 18.5 mm diameter, 25 mm shank by Teknik Makina The Solid drill U818-1TM is a purpose-built indexable-insert drilling solution for industrial CNC and workshop toolholder systems. 18.5 mm cutting diameter 25 mm shank for secure mounting 54 mm cutting length for deeper holes Compatible with SPMG 0602 indexable inserts Precision and stability for reliable holemaking The U818-1TM delivers consistent hole diameters through a rigid geometry that benefits from the large 25 mm shank and an accurately ground connection length. The combination of a defined cutting diameter and robust shank reduces vibration during machining, which improves surface finish and repeatability. Compatibility with SPMG 0602 indexable inserts ensures tool life is maintained by simple insert changes rather than complete tool replacement, supporting predictable production quality. Work deeper with consistent chip control and reduced downtime With a 54 mm cutting length and a total of 131 mm overall length, this design permits deeper blind-hole and short through-hole operations without frequent tool changes. Insert-based cutting edges allow controlled chip formation and easier clearing compared with solid, non-indexable systems; the result is fewer interruptions and longer productive tool cycles. The moderate weight (0.327 kg) also aids rapid spindle response and stable toolpath execution in high-volume machining. Straightforward integration into existing toolholders and systems The drill’s 25 mm shank and 56 mm shank length support secure clamping in conventional holders and adaptors, simplifying retrofits into established setups. Compatibility lists for insert suppliers such as Taegutec and YG-1 make sourcing spare inserts straightforward and economical. For workshops seeking predictable tool change routines, the replaceable-index solution reduces inventory of complete tools while keeping cutting edge availability high. Cost-efficiency through serviceable cutting edges and reliable supply Indexable tooling such as this reduces long-term tooling cost because only the cutting inserts require periodic renewal. The U818-1TM’s design concentrates wear on the SPMG 0602 inserts, allowing fast replacement and minimal adjustment. Combined with Metav’s European stock and logistical reliability, the tool supports steady supply to production lines and reduces the administrative overhead of multi-supplier sourcing. For reliable compatibility and fast supply of the Teknik Makina U818-1TM solid drill, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tooling and dispatch options from Emmerich. Technical data SKU: U818-1TM Manufacturer: Teknik Makina Designation: Solid drill ECLASS: 21180201 Facts Diameter: 18.5 mm Cutting length: 54 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 131 mm Weight: 0.327 kg Special features Insert type: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Indexable-insert drilling concept Files available: 2 migration entries FAQ What insert type does this tool use? The Teknik Makina U818-1TM is configured for SPMG 0602 indexable inserts, providing quick edge replacement and efficient chip control. How deep can this drill cut in one pass? The tool has a 54 mm cutting length and a total length of 131 mm, which supports deeper blind-hole operations within that axial range while maintaining stability. Which shank size is required for clamping? Clamping requires a 25 mm shank with a 56 mm engagement length; this dimension suits standard holders and adapters used in industrial toolrooms. Is the tool suitable for automated CNC production? Yes — the indexable design and secure shank provide repeatable performance for CNC machining; the Teknik Makina drill is intended for integration into automated workflows where predictable tool changes and high uptime matter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise finishing and secure clamping for reliable internal turning operations; the combination of a 0.01 mm machining capability and compatibility with CCMT 09T3 indexable inserts supports a stable, high-quality production flow. Order directly via Metav Werkzeuge or consult the Metav team for application advice. THB101TM Boring Bar — Finishing Tool for CCMT 09T3 Indexable Inserts (Teknik Makina) A THB101TM boring bar engineered for precision finishing in internal turning, compatible with CCMT 09T3 indexable inserts and optimised for bores from 180 to 240 mm. Precision finish to 0.01 mm Compatible with CCMT 09T3 inserts Shank Ø40 mm for secure clamping Bore range 180–240 mm Achieve consistent tolerances with a tool built for finishing The THB101TM is designed for high-precision internal turning where repeatable results are essential. Its fine-machining capability of 0.01 mm enables the production of components that meet strict dimensional requirements, reducing the need for secondary grinding or rework. By focusing on consistent surface quality and dimensional stability, the tool helps maintain throughput while protecting final part integrity. This stability is especially critical in batch production where every part must match the same specification. Stable clamping and tool geometry for reduced vibration A robust shank Ø40 mm and a total length of 163.7 mm provide a controlled overhang and secure seat in the toolholder, which lowers the risk of chatter during finishing passes. Reduced vibration translates directly into a finer surface finish and longer insert life, delivering measurable productivity benefits. The assembly weight of 5.967 kg contributes to the bar’s inertial stability, supporting clean cuts across the specified bore 180–240 mm range. Fast insert changes and straightforward maintenance Compatibility with CCMT 09T3 indexable inserts keeps tooling costs predictable while offering proven cutting geometries for finishing tasks. The clamping system uses a Torx T15 key and M3.5x9 screw, facilitating secure and repeatable insert fastening with minimal downtime for changeover. Clear, standardised fastenings simplify routine servicing and enable quick restoration of cutting geometry after a tool change, improving overall machine utilisation. Suited to precision-focused workshops and production lines Produced by Teknik Makina, this boring bar targets job shops and production facilities where finish quality and reliable repeatability matter. Sourcing via Metav ties the tool into a broader offering of precision equipment and services, streamlining procurement and after-sales routing. For operations that place a premium on measured outcomes and predictable supply, the THB101TM integrates into process chains that prioritise accuracy and consistent delivery. For a technical quotation or a case-specific machining recommendation for the Teknik Makina THB101TM boring bar, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: THB101TM Manufacturer: Teknik Makina Suitable for: CCMT 09T3 indexable inserts Fine machining: 0.01 mm Shank diameter: 40 mm Bore range: 180–240 mm Total length: 163.7 mm Weight: 5.967 kg Torx key: T15 Torx screw: M3.5x9 Facts Shank Ø: 40 mm Fine-machining tolerance: 0.01 mm Length: 163.7 mm Bore diameter range: 180–240 mm Weight: 5.967 kg Special features Designed for finishing operations Compatibility with CCMT 09T3 indexable inserts Torx T15 / M3.5x9 fastening system Robust construction for stable cuts FAQ Which indexable inserts fit this boring bar? The THB101TM boring bar is designed specifically for CCMT 09T3 indexable inserts, providing correct seating and clamping geometry for reliable finishing. What bore diameters can be machined with the tool? The tool is intended for internal turning in a bore range of 180–240 mm, offering a dedicated solution for that diameter window. What clamping and fastening does the bar use? Clamping for the insert employs a Torx T15 key together with an M3.5x9 screw to ensure secure, repeatable fastening of the CCMT insert. What precision can be expected from the finishing passes? The THB101TM is rated for fine machining to 0.01 mm, supporting tight dimensional control suitable for precision components. What are the key dimensions to consider for setup? Important setup values include a shank diameter of 40 mm, total length 163.7 mm, and a weight of 5.967 kg, which inform holder selection and overhang planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from improved process reliability through a 40 mm shank that enhances stability and a 240 mm max cutting diameter that extends capability; combined with compatibility for CCMT 09T3 indexable inserts, this results in consistent bore quality and efficient insert changes — order the fine-finishing boring tool directly via Metav Werkzeuge or consult our advisers for application guidance. Fine-finishing boring tool THB111TM – 180 mm, for CCMT 09T3 The fine-finishing boring tool THB111TM is designed for precise internal machining, combining robust shank dimensions with compatibility for CCMT 09T3 indexable inserts to deliver repeatable finishing performance. For CCMT 09T3 indexable inserts Max cutting diameter 240 mm Shank diameter 40 mm for rigidity Cutting height 93.7 mm for deep reach Consistent bore finish with reduced rework The THB111TM is engineered to support high-quality internal finishing by focusing on dimensional repeatability and surface integrity. The combination of a substantial shank diameter (40 mm) and a tool geometry suited to fine finishing minimises vibration during cuts, which reduces chatter and the need for secondary polishing. When paired with CCMT 09T3 indexable inserts, the set-up allows fast index changes while maintaining cutting edge geometry, so cycle times remain predictable and scrap rates fall. This contributes directly to improved production throughput and lower per-part processing costs. Stable machining and straightforward setup for reliable production A key practical advantage is the tool’s capacity to provide stability through its design: the robust connection to the machine and the specified cutting height of 93.7 mm enable deep internal access without compromising stiffness. This stability translates into fewer tool offsets and a reduced requirement for frequent re-calibration. The use of standard CCMT 09T3 inserts simplifies procurement and inventory control, as these inserts are widely available and cost-effective to replace. Technicians with limited experience of fine boring will find the straightforward insert clamping and predictable cutting behaviour helpful when establishing repeatable machining programmes. Practical benefits for workshop efficiency and process control By integrating a boring solution that supports a 240 mm maximum cutting diameter, workshops can avoid multiple tool changes for larger bores, reducing non-cutting time during set-ups. The modular nature of the system — a finishing bar optimised for indexable inserts — enables targeted maintenance: worn edges are replaced, not entire tools. This lowers tooling expenditure and shortens downtime. In addition, the compatibility with established insert geometries ensures a wide choice of grades and coatings can be employed to match workpiece materials and cutting conditions, improving both surface quality and tool life. For precision internal turning tasks, request tailored application advice or arrange procurement through Metav Werkzeuge — discuss the Teknik Makina THB111TM and its suitability for specific production requirements with our specialists. Technical data Article number: THB111TM Eclass: 21041590 Brand: Teknik Makina Label: 180mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 Facts Diameter: 180 mm Shank diameter: 40 mm Max cutting diameter: 240 mm Cutting height: 93.7 mm Special features For CCMT 09T3 indexable inserts Fine-finishing application Designed for internal boring operations SKU: THB111TM FAQ Which insert type is recommended for this boring tool? The boring tool is designed specifically for CCMT 09T3 indexable inserts; the THB111TM accepts that insert geometry for fine finishing. What is the maximum cutting diameter achievable? Maximum cutting diameter is 240 mm, allowing larger bores to be machined without additional tool changes. How does the shank diameter affect machining performance? The 40 mm shank diameter provides increased rigidity, which improves stability and reduces vibration during precision finishing operations. Is the tool intended for deep internal finishing tasks? Yes, the 93.7 mm cutting height is intended to provide reach for deep internal bores while maintaining the stiffness required for fine finishing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise grooving performance with solid clamping and compatibility with ISCAR 4C indexable inserts; the robust 20 mm shaft and 35 mm cutting height provide stable, repeatable cuts for batch turning. Order the grooving clamp holder directly via Metav Werkzeuge or consult the specialists for tailored selection advice. Grooving clamp holder K676TM — 20 mm shaft, 4 mm cutting width (Teknik Makina) A grooving clamp holder engineered for secure parting and grooving in CNC turning applications, compatible with ISCAR 4C indexable inserts Solid clamping for repeatable grooving Compatible with ISCAR 4C indexable inserts 20 mm shaft for secure tool holding 4 mm cutting width for narrow grooves Consistent cuts and measurable productivity gains Precision in series production depends on stable toolholding and predictable geometry. The K676TM grooving clamp holder delivers both through a 20 mm shaft and a 35 mm cutting height, which together reduce vibration and improve edge engagement during parting and grooving cycles. Stable contact between holder and insert leads to improved repeatability and fewer rejects, which supports faster throughput and lower rework costs. The measured stability of the clamping system makes process parameters easier to reproduce across shifts and machines. Fast integration with established tool systems Designed for seamless integration on standard lathe set-ups, this holder accepts ISCAR indexable plates in the 4C format and matches the common boring bar ISO designation S20Q, simplifying tool management in mixed-tool environments. The 4 mm cutting width suits narrow groove requirements while the holder’s compatibility with a recognised plate size reduces the need for multiple specialised tool stocks. Clear mechanical interface data enables straightforward set-up and shortens changeover times, supporting leaner workshop operations. Robust handling and compact dimensions for workshop use With an overall length of 180 mm, a nominal diameter of 25 mm, and a mass of 0.461 kg, the tool achieves a balance between reach and rigidity. The clamping principle is engineered for secure retention of the insert during interrupted cuts, which benefits both finish quality and tool life. The compact footprint and predictable centre of mass also ease tool programming and collision avoidance in CNC routines, while the modest weight supports safe manual handling during tool changes. Application scope and recommended use cases This clamping holder is suited to precision parting and groove machining tasks in small to medium batch production and trade workshops that rely on indexable insert systems. The holder’s specification—S20Q interface, 4C insert format and defined cutting geometry—makes it a practical choice for operations aiming to standardise tooling across multiple turning centres. For process optimisation or bespoke holder variants, Metav Werkzeuge’s consultants can assist with selection based on machine capability and insert style. For reliable grooving with Teknik Makina’s precision clamping, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the K676TM and receive personalised ordering advice. Technical data Article number: K676TM Manufacturer: Teknik Makina eClass: 21181005 Brand: Teknik Makina Facts Shaft diameter: 20 mm Cutting height: 35 mm Cutting width: 4 mm Overall length: 180 mm Diameter: 25 mm Weight: 0.461 kg Special features Compatible with ISCAR 4C indexable inserts Boring bar ISO designation: S20Q Holder designation: 4C-R DGN Suitable insert size: 4C FAQ Which insert type fits this holder? The holder is compatible with ISCAR 4C indexable inserts, designed to accept standard 4C plates for grooving and parting. What are the key dimensions to check for machine setup? Essential dimensions are the 20 mm shaft diameter, 35 mm cutting height, 4 mm cutting width and 180 mm overall length, which determine clearance and clamping requirements for the K676TM. Is the tool suitable for CNC lathes used in small-batch production? Yes; the design of the grooving clamp holder supports precise, repeatable parting and grooving cycles typical in small to medium batch CNC turning. How does the clamping concept affect tool life and finish? The secure clamping reduces insert movement and vibration, which contributes to improved surface finish and extended insert life when machining under advised parameters. Can the holder be integrated with existing S20Q tool stocks? The holder uses the S20Q interface and is therefore compatible with systems that accommodate that boring bar designation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, precision‑oriented boring solution that combines internal coolant for reliable chip evacuation with compatibility for SDUC indexable inserts; order the KA252TM via Metav Werkzeuge or consult our specialists for suitability and delivery. KA252TM Boring Bar (A12K SDUCL) — SDUC for DC-- Indexable Inserts, Left‑hand The KA252TM boring bar is a left‑hand turning tool designed for secure insert clamping and controlled chip flow in medium‑duty CNC turning applications. Robust left‑hand cutting orientation Internal coolant for chip evacuation Compatible with DC-- 0702 SDUC inserts 16 mm shank, 180 mm overall length Consistent chip control for longer tool life The boring bar employs internal coolant directed to the cutting edge to improve chip evacuation and thermal control during interrupted or continuous cuts. With a 93° cutting angle, the geometry reduces radial cutting forces and diminishes vibration, which prolongs insert life and stabilises component tolerances. This pragmatic setup translates into fewer tool changes and more predictable cycle times on production runs. Predictable performance through standardised inserts Designed for the SDUC style of tooling and optimised for DC-- 0702 indexable inserts, the tool supports quick insert replacement and consistent cutting geometry. The standardised insert interface simplifies tooling logistics and reduces setup time on the machine. For operations where repeatability matters, the combination of SDUC mounting and standard insert sizes ensures uniform cutting behaviour across batches. Compact mounting with precise clamping for tight spaces The bar’s 16 mm shank and 180 mm overall length offer a compact footprint for applications with restricted overhang, while the raised cutting height of 40 mm provides reliable contact with the insert corner. The assembly’s low mass (0.267 kg) reduces centrifugal forces at higher spindle speeds and the specified clamp size 07 delivers a secure seat for the insert, maintaining concentricity and reducing runout risk. This compact configuration is suited to both prototype work and small‑batch production where accessibility and stiffness are essential. For bespoke advice on integrating the Teknik Makina KA252TM into existing tool holders or to request a delivery from Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants in Emmerich will advise on compatibility and logistics Technical Data Article number: KA252TM Manufacturer: Teknik Makina Designation: Boring bar (SDUC for DC-- indexable inserts) ISO designation: A12K SDUCL Core data Shank diameter: 16 mm Cutting height: 40 mm Diameter: 18 mm Overall length: 180 mm Weight: 0.267 kg Cutting angle: 93° Special features Internal coolant Left‑hand cutting direction Compatible inserts: DC-- 0702 Clamp size: 07 FAQ Which inserts fit this boring bar? The KA252TM is specified for DC-- 0702 indexable inserts in the SDUC format, providing a standardised insert seat for rapid replacement. Is coolant supplied through the bar? Yes — the tool features internal coolant to the cutting zone for improved chip control and heat management during machining. What operations is the tool intended for? This boring bar is intended for left‑hand turning and facing tasks where stable clamping and controlled chip evacuation are required. What are the key dimensions for mounting? Mounting requires a 16 mm shank connection and allows a compact 180 mm overall length, suitable for restricted overhangs. Which clamp or holder size is required? The tool is designed with a clamp reference of size 07 to ensure correct insert seating and repeatable clamping accuracy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining precise right-hand cutting, internal coolant and compatibility with DC-- 0702 indexable inserts, this boring bar delivers stable chip control and repeatable bore quality in standard workshop and light industrial turning operations. Order the tool directly via Metav Werkzeuge or consult our advisors for application guidance. Boring bar A12K SDUCR (KA122TM) — SDUC for DC-- indexable inserts, internal coolant — Teknik Makina The Boring bar A12K SDUCR (KA122TM) is a right-hand, internally cooled boring bar designed for use with DC-- 0702 indexable inserts in precision turning and internal boring applications. Right-hand cutting with 93° approach angle Internal coolant for secure chip evacuation Compatible with DC-- 0702 indexable inserts Ø18 mm body, 16 mm shank, 180 mm overall length Consistent bore results through optimised cutting geometry The A12K SDUCR design combines a 93° approach angle with a defined cutting height to support controlled metal removal and dimensional repeatability. The specified cutting height of 40 mm and the 16 mm shank provide a rigid interface with standard toolholders, reducing deflection during interrupted cuts. For engineers this means fewer reworks and more predictable cycle times, as the geometry keeps the insert position stable and the cutting forces directed to minimise chatter. Coolant-fed machining for improved surface finish and tool life Built-in internal coolant feeds directly to the cutting zone, improving chip evacuation and reducing heat at the cutting edge. The directed coolant flow helps maintain a consistent cutting temperature, which in turn extends insert life and supports better surface integrity on the bore wall. For operations with moderate to high material removal rates, these benefits translate into longer intervals between insert changes and a steadier process window. Standardisation and simple workshop integration With the ISO-style designation A12K SDUCR and a compatibility listing for DC-- 0702 inserts, the bar fits established indexable-insert workflows and common clamping systems. The Ø18 mm body and 180 mm overall length make it suitable for many common holder configurations, while the listed clamping holder code supports rapid identification for replacement or inventory. This standardised approach reduces downtime during tool changes and simplifies stock management in mixed-production environments. For precise boring operations, choose Teknik Makina quality — order KA122TM through Metav Werkzeuge in Emmerich or contact our technical advisers at info@metav-werkzeuge.com or +49 2822 7131930 for application recommendations and compatibility checks Technical data Article number: KA122TM Manufacturer: Teknik Makina ISO designation: A12K SDUCR Type: SDUC for DC-- indexable inserts Facts Diameter: 18 mm Shank diameter: 16 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.267 kg Approach angle: 93° Cutting direction: Right Compatible insert size: DC-- 0702 Special features Internal coolant Right-hand machining Compatible with DC-- 0702 indexable inserts Clamping holder code: 07 FAQ Which indexable inserts fit this boring bar? The A12K SDUCR boring bar (KA122TM) is specified for use with DC-- 0702 indexable inserts and is designed to secure them in a SDUC-style pocket. Is the tool coolant-fed? Yes — internal coolant is integrated into the bar to support directed coolant flow to the cutting edge, improving chip evacuation and tool life for the A12K SDUCR. What cutting direction does the bar use? The bar is configured for right-hand cutting, which is standard for many turning and boring cycles and is reflected in the tool geometry. What are the key dimensions to check for holder compatibility? Key dimensions are Ø18 mm body diameter, 16 mm shank diameter and 180 mm overall length; these determine fitment with common holders and extension limits for KA122TM. What does the ISO designation A12K SDUCR indicate? The ISO-style code A12K SDUCR denotes the bar’s shank and head form and its suitability for SDUC-type indexable inserts, aiding standardised selection and replacement in workshop tool inventories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Gain stable, vibration‑reduced external turning through the combination of an 18 mm diameter and a rigid 16 mm shank, while the internal coolant ensures reliable chip control and consistent surface finish; order the KA108TM boring bar directly via Metav Werkzeuge or consult our specialists for application advice. KA108TM boring bar (A14Q SCLCR) — right‑hand, internal coolant, Ø 18 mm A boring bar (A14Q SCLCR) designed for right‑hand external turning with CC-- 09T3 indexable inserts, suited to general workshop and production use. Internal coolant for improved chip evacuation 18 mm diameter for rigid, stable cutting Right‑hand cutting orientation for standard setups Compatible with CC-- 09T3 indexable inserts Greater process stability from a compact, rigid design The compact 180 mm overall length combined with an 18 mm diameter and 16 mm shank provides high torsional stiffness for external turning operations. This increased rigidity reduces vibration and chatter, which in turn improves surface quality and extends tool life. For production environments where repeatability matters, the compact profile offers stable cutting without compromising access to confined workpieces. The measured weight of 0.267 kg contributes to easier handling when changing tools while remaining heavy enough for steady cutting performance. Cleaner machining and longer insert life through internal coolant Built‑in internal coolant supplies cutting fluid directly to the cutting zone, lowering edge temperature and aiding chip evacuation. This direct coolant feed is particularly beneficial where consistent cooling and effective chip control are required to prevent re‑cutting and heat damage. The tool’s 95° cutting angle and right‑hand orientation are optimised for conventional turning directions, helping to maintain predictable cutting forces and a controlled chip flow. The result is improved insert life and fewer interruptions for edge dressing or replacement. Flexible compatibility for efficient workshop integration The tool accepts CC-- 09T3 indexable inserts and carries the ISO designation A14Q SCLCR, simplifying procurement and replacement planning. Compatibility with common insert geometries reduces stocking complexity and allows quick insert changes to adapt to different materials or finish requirements. The combination of reliable coolant supply, standard insert format and compact dimensions makes this boring bar a cost‑efficient choice for small batches and routine production alike, enabling a consistent workflow without compromising on versatility. For technical selection and availability of the Teknik Cutting Tools KA108TM boring bar, contact Metav Werkzeuge to discuss application fitment and delivery options Technical data Article number: KA108TM Brand: Teknik Makina ISO designation: A14Q SCLCR Compatible inserts: CC-- 09T3 Dimensions & measurable values Diameter: 18 mm Shank diameter: 16 mm Overall length: 180 mm Cutting angle: 95° Weight: 0.267 kg Design & special features Cutting direction: right‑hand Internal coolant: yes Designation (secondary): SCLC for CC-- Indexable Inserts FAQ What insert type fits this boring bar? The KA108TM boring bar is compatible with CC-- 09T3 indexable inserts; the A14Q SCLCR geometry accepts this standard insert format for quick replacement. Is the coolant delivered to the cutting edge? Yes — the tool features internal coolant, which directs fluid to the cutting zone to aid cooling and chip evacuation and so prolong insert life. Which cutting direction is intended for this tool? This boring bar is configured for right‑hand cutting, matching standard turning machine setups and conventional feed directions. What are the key dimensions for machine setup? Key setup values are Ø 18 mm cutter diameter, 16 mm shank diameter and 180 mm overall length; these metrics support fixture and holder selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact diameter, reliable internal coolant and secure clamping for consistent bore quality and efficient workshop throughput — order the tool directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Boring Bar A12-16M, 18 mm with internal coolant — Teknik Makina The Boring Bar A12-16M is a compact drilling and boring tool designed for use with DCMT 0702 indexable inserts, suited to precision internal boring in small- to medium-sized engineering operations. 18 mm diameter for compact bores Internal coolant for secure chip evacuation 16 mm shank for stable clamping Compatible with DCMT 0702 indexable inserts Consistent concentricity for compact bores The A12-16M boring bar delivers stable clamping and reduced vibration through its 16 mm shank and compact construction, promoting repeatable concentricity in confined bores. With an outer diameter of 18 mm and a total length of 150 mm, the tool is engineered to keep runout low and to maintain insert position under cutting forces. This leads to fewer rejects and less rework, directly supporting throughput targets in production or toolroom environments. Improved process reliability with internal coolant Built-in internal coolant channels provide direct fluid delivery to the cutting zone, improving chip evacuation and temperature control. The result is a steadier cutting edge temperature, extended insert life and a reduced tendency for built-up edge. For operations that prioritise productivity, the internal coolant feature enables higher stable feed rates and contributes to longer tool life without compromising surface finish. Fast insert changes and secure fixation The tool is configured for DCMT 0702 indexable inserts and uses a Torx T8 key with an M2.5x5.5 Torx screw, simplifying insert replacement and minimising set-up time. The right-hand cutting orientation and a 95° cutting angle are chosen to suit common turning and boring operations, making the tool straightforward to integrate into existing programmes. Clear mechanical fixation reduces the need for frequent adjustments and supports predictable machining cycles. Practical handling and workshop compatibility Weighing only 0.187 kg and featuring a 40 mm insert pocket height, the boring bar balances rigidity with accessibility for manual handling and machine loading. The compact footprint and compatibility with standard DCMT 0702 inserts make the bar suitable for engineering workshops, maintenance shops and small-batch production. The model designation A12-16M and SKU KA514TM simplify inventory tracking and reordering within a centralised tool-management system. Contact Metav Werkzeuge for tailored advice on the Teknik Cutting Tools boring bar A12-16M (SKU KA514TM) and to discuss suitable inserts and clamping options — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: KA514TM Model: A12-16M Manufacturer: Teknik Makina Core dimensions Diameter: 18 mm Total length: 150 mm Shank diameter: 16 mm Cutting height: 40 mm Weight: 0.187 kg Cutting angle: 95° Special features Internal coolant Compatible with DCMT 0702 indexable inserts Right-hand cutting Torx key T8 Torx screw M2.5x5.5 Clamp holder width 11 mm FAQ What materials is this boring bar suited for? The boring bar A12-16M (Teknik Cutting Tools, SKU KA514TM) is intended for general internal boring applications using DCMT 0702 inserts; the specific material suitability depends on the insert grade chosen for the operation. How does the internal coolant benefit machining? Internal coolant on the KA514TM supplies coolant directly to the cutting edge, improving chip evacuation and thermal control, which helps to extend insert life and maintain consistent surface finish. Which insert type fits this tool? This bar accepts DCMT 0702 indexable inserts; the geometry supports a secure fit and efficient cutting when the correct insert grade and clearance are selected for the material. What fastening hardware is required for insert replacement? Insert fixation uses a Torx screw M2.5x5.5 operated with a Torx T8 key, enabling quick and secure insert changes on the boring bar. Can the bar be used on CNC lathes and manual machines? Yes, the compact design, 16 mm shank and 150 mm overall length of the A12-16M make it suitable for both CNC turning centres and manual lathes, provided the machine offers appropriate clamping and coolant supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable‑insert solution that combines precise chamfer geometry with quick insert changes for minimal downtime; the result is consistent edge preparation and efficient workshop integration — order the chamfer cutter directly via Metav Werkzeuge or ask our consultants if specialist advice is required. Chamfer cutter S335TM – 18 mm diameter, shank Ø16 mm (Teknik Makina) The Chamfer cutter S335TM is a single‑flute tool designed for producing controlled 60° and 120° chamfers with indexable inserts, ideal for workshop and light industrial milling tasks. Compatible with TCMT 1102 inserts Dual chamfer angles 60° and 120° Shank Ø16 mm for reliable clamping 35 mm cutting height, 100 mm overall Precise chamfer geometry for repeatable edge quality The S335TM delivers stable, repeatable chamfers by combining a measured cutting diameter of 18 mm with clearly defined chamfer angles of 60° and 120°. The single‑flute configuration supports controlled material removal and consistent chip formation; when used with an indexable TCMT 1102 insert the assembly enables quick restoration of cutting performance without full regrinding. The tool’s Ø16 mm shank ensures secure seating in standard holders, which reduces vibration and supports dimensional consistency across batches. Fast maintenance and low downtime for smooth production flow Maintenance is straightforward: the insert is secured with a Torx screw M2.5x8.5 and removed or fitted using a T8 key, allowing routine service to be completed at the machine without specialised tooling. The lightweight construction (approx. 0.157 kg) and compact 100 mm overall length mean handlers can replace or store spares easily, while the 35 mm effective cutting height gives enough engagement for substantial chamfers without overloading the cutter body. These attributes combine to lower changeover time and maintain high spindle utilisation. Versatile use and practical benefits in assembly and finishing Chamfering with this tool reduces burrs, eases component assembly and minimises stress concentrators at edges — advantages appreciated across mechanical workshops and fabrication environments. The single cutting edge and indexed insert approach allow controlled surface finish and predictable results, making the cutter suitable for deburring, lead‑in preparation and cosmetic edge work. Its compact form and standard shank diameter facilitate integration into existing tool inventories, simplifying logistics and holder compatibility. For technical advice, availability or to secure supply from our Emmerich warehouse, contact Metav Werkzeuge for tailored recommendations on the Teknik Makina S335TM chamfer cutter and compatible inserts. Technical data SKU: S335TM Manufacturer: Teknik Makina Product type: Chamfer cutter (Fasenfräser) ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 18 mm Shank diameter: 16 mm Cutting height: 35 mm Overall length: 100 mm Weight: 0.157 kg Chamfer angles: 60° and 120° Cutting edges: 1 Special features Compatible with indexable insert TCMT 1102 Torx screw M2.5x8.5 for insert fixation Torx key size T8 for maintenance Single‑flute design for chip control Compact, workshop‑friendly dimensions FAQ What chamfer angles can be produced with this cutter? The cutter produces defined 60° and 120° chamfers; these options are integral to the cutter geometry and suit common assembly and finishing requirements. Which insert type is compatible with the S335TM? The S335TM is designed for indexable TCMT 1102 inserts, enabling fast replacement and consistent cutting performance. How is the insert secured and what tool is required? Insert retention is via a Torx screw M2.5x8.5; a T8 Torx key is used for removal and installation. Is the shank compatible with standard tool holders? The tool features a Ø16 mm shank, which fits standard collets and chucking systems that accept a 16 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of insert compatibility, a robust 16 mm shank and an Ø18 mm cutting diameter to secure stable, repeatable milling performance; order directly via Metav Werkzeuge or consult our specialists for holder matching and delivery options. S164TM — Shank cutter for APXT 1003 indexable inserts, Ø18 mm, 16 mm shank (Teknik Cutting Tools) The S164TM is a shank cutter designed for mounting APXT 1003 indexable inserts, offering a compact solution for short-to-medium length milling operations in production and workshop settings. Compatible with APXT 1003 indexable inserts Ø18 mm cutting diameter 16 mm shank for standard toolholders Two cutting edges for stable milling Precision and stability for consistent milling results The cutter is engineered to deliver predictable chip control and repeatable geometry through its two-flute layout and a true 90° cutting angle. The combination of an Ø18 mm diameter with a 16 mm shank reduces overhang and vibration when mounted in standard holders, which translates into improved surface finish and extended insert life. For operations where cycle time and part quality are critical, this design enhances process reliability by supporting consistent engagement and stable cutting forces. Fast insert changes minimise downtime The clamping solution uses a Torx screw (M2.5x5.5) tightened with a T8 key, enabling rapid and secure indexable insert changes. This mechanical simplicity reduces changeover times and lowers the chance of incorrect seating compared with more complex clamping systems. When paired with APXT 1003 inserts from suppliers such as Korloy, the tool enables quick restoration of cutting performance on the shop floor, making it suitable for both frequent maintenance cycles and uninterrupted production runs. Practical design for workshop and production use With an overall length of 120 mm and a cutting length of 45 mm, the shank cutter balances reach with rigidity for many common milling tasks. The modest weight of 0.19 kg contributes to easier handling during tool setup and fewer balance concerns in high-speed spindles. This shank-mounted solution is particularly useful where inventory simplicity is valued: the same holder families and clamping fixtures used for other 16 mm shank tooling can be retained, simplifying toolroom logistics and reducing tooling stock complexity. For assured performance with this Teknik Cutting Tools shank cutter, contact Metav Werkzeuge for matching toolholders and fast delivery from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S164TM Designation: Shank cutter for APXT 1003 indexable inserts Brand: Teknik Cutting Tools Key measurements Diameter: 18 mm Shank diameter: 16 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.19 kg Features & compatibility For APXT 1003 indexable inserts Compatible insert supplier: Korloy Torx screw: M2.5x5.5 Torx key size: T8 Cutting angle: 90° FAQ What types of inserts fit this cutter? The cutter is intended for APXT 1003 indexable inserts; it is compatible with inserts from vendors listed as suitable, for example Korloy. How is the insert secured in the cutter? An M2.5x5.5 Torx screw secures each insert; a T8 key is required for clamping and removal on the S164TM shank cutter. What are the primary advantages of this shank-mounted solution? The primary benefits are reduced overhang with a 16 mm shank, stable cutting from the two-flute geometry and fast insert changes that help keep production uptime high. Is the cutter suitable for production environments? Yes. The combination of an Ø18 mm diameter, short cutting length and robust clamping makes the tool appropriate for repetitive production tasks where changeover speed and consistency matter. What should be checked before fitting the tool to a holder? Verify holder compatibility with a 16 mm shank and confirm the correct seating for APXT 1003 inserts; ensure the Torx screw torque is applied according to workshop best practice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise compatibility with APXT 1003 indexable inserts and a compact, shank-mounted design to maintain consistent machining accuracy. The robust clamping with a Shank Ø16 mm and Ø18 mm cutting diameter ensures stable performance and repeatable results. Order directly via Metav Werkzeuge or consult the Metav team for application advice. Shaft milling cutter S142TM – Indexable insert cutter, Ø18 mm, for APXT 1003 The Shaft milling cutter S142TM is a shank-mounted milling tool developed for use with APXT 1003 indexable inserts, suited to general milling operations where fast insert changes and secure clamping are required. Ø18 mm cutting diameter Shank Ø16 mm for secure clamping Fits APXT 1003 indexable inserts Two cutting edges, 90° cutting angle Consistent insert compatibility and quick servicing The holder is designed specifically for APXT 1003 inserts, providing a standardised interface that simplifies tool management in mixed fleets. Compatibility with Korloy indexable inserts reduces the need for multiple tool holders and streamlines inventory. The clamping fastener specification—M2.5x5.5 Torx screw with a T8 key—guarantees repeatable seating of inserts and straightforward replacement, so downtime for maintenance is minimised while process stability is maximised. Stable shank design for repeatable accuracy A solid Shank Ø16 mm provides secure seating in compatible toolholders, reducing runout and improving surface finish consistency. The Ø18 mm cutting diameter and 30 mm cutting length balance accessibility and rigidity for a range of milling tasks. With two cutting edges and a 90° cutting angle, the tool delivers predictable chip formation and stable cutting forces, which supports more consistent component quality and easier process parameter definition. Workshop efficiency through simple integration With an overall length of 100 mm and a compact mass of 0.162 kg, the cutter is straightforward to handle and fits most standard shank clamping systems of the appropriate size. The design focuses on ease of insert replacement and predictable maintenance intervals, helping to reduce tooling logistics overhead. As a result, purchasing the S142TM supports operational continuity and a lower total cost of ownership where rapid insert changes and reliable positioning are priorities. For technical matching or to arrange supply of the Teknik Cutting Tools S142TM through Metav Werkzeuge, please contact Metav Werkzeuge for professional advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S142TM Designation: Shaft milling cutter Secondary designation: for APXT 1003 indexable inserts Manufacturer: Teknik Makina Data Cutting diameter: 18 mm Shank diameter: 16 mm Cutting length: 30 mm Overall length: 100 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.162 kg Special features Fits APXT 1003 indexable inserts Compatible with Korloy indexable inserts Torx screw M2.5x5.5; Torx key T8 FAQ Which insert type does this cutter accept? The cutter is designed for APXT 1003 indexable inserts; the interface matches the APXT 1003 geometry for reliable seating. Is the S142TM compatible with Korloy inserts? Yes, the tool is listed as compatible with Korloy indexable inserts that conform to the APXT 1003 specification. What size shank is required for clamping? A 16 mm shank clamping system is required; the cutter has a Shank Ø16 mm to ensure correct mounting and stable performance. Which fastening components are used to secure the insert? Insert retention uses an M2.5x5.5 Torx screw and requires a T8 Torx key for secure and repeatable attachment. What are the key dimensions to consider for fixture planning? Important dimensions include the Ø18 mm cutting diameter, 30 mm cutting length and 100 mm overall length, which should be considered during fixture and toolholder selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining an indexable-insert system with a robust 18 mm cutting diameter and a 16 mm shank delivers fast cycle times and dependable tool stability; order via Metav Werkzeuge for dependable supply or consult our specialists for application-specific guidance. Shank Milling Cutter S184TM — for APXT 1003 indexable inserts, Ø18 mm, 60 mm cutting length (Teknik Makina) The Shank Milling Cutter S184TM is a precision shank cutter designed for productive milling with APXT 1003 indexable inserts, suited to roughing and semi-finish operations where rapid insert changes and consistent geometry are required. Indexable system for APXT 1003 inserts 18 mm cutting diameter for versatile milling 16 mm shank for stable clamping Two cutting edges with 90° cutting angle Increased machining efficiency through insert technology The combination of an indexable-insert system and a defined 18 mm cutting diameter reduces downtime for regrinding and keeps spindle utilisation high. Using replaceable APXT 1003 inserts means the cutting edge is renewed within seconds, so cycle times are shortened and process consistency improves. The available 60 mm cutting length supports deeper passes than shorter tools, enabling effective material removal without frequent tool changes. The design focuses on predictable performance on repetitive milling tasks, making the cutter a practical choice where throughput and consistency matter. Stable toolholding and precise geometry for repeatable results A solid 16 mm shank gives the necessary rigidity for stable clamping in standard collets or shrink-fit holders, which helps to reduce chatter and improve surface finish. The cutter's relatively low mass (approx. 0.35 kg) and balanced form assist with runout control and tool life. The 90° cutting angle and two cutting edges provide a straightforward cutting geometry that is simple to set up and predictable in behaviour, so technicians can rely on repeatable results across batches without complex parameter tuning. Fast assembly and clear compatibility for workshop use Assembly and indexable-insert replacement are kept simple: the cutter uses a Torx screw M2.5x5.5 secured with a T8 torx key, allowing quick, reliable clamping of inserts and minimal downtime during changeover. Compatibility with APXT 1003 inserts — commonly supplied by Korloy — means inserts are readily available from standard distributors, simplifying logistics and inventory management. The design emphasises practical serviceability, making it suitable for both jobbing shops and production environments where quick maintenance is essential. Practical applications and when to specify this cutter This shank cutter is intended for general milling tasks that benefit from indexable-insert systems: shoulder milling, pocketing, and medium- to heavy-duty passes where removal rates and fast edge replacement are priorities. Specify the cutter where tooling strategies favour insert-based solutions to reduce tooling cost per edge and to keep machine uptime high. The combination of diameter, cutting length and insert format makes it a flexible option for production lines and workshop setups seeking efficient, repeatable milling without special tooling changes. Contact Metav Werkzeuge for tailored technical advice and reliable supply of the Teknik Cutting Tools Shank Milling Cutter S184TM; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S184TM Brand: Teknik Makina Product: Shank milling cutter for APXT 1003 indexable inserts ECLASS: 21180806 ETIM: EC011860 Files: 62de7eecbd24461b3d5f7a7d, 62de7e5c0f56dbb4de4dbf0f Dimensions & core data Diameter: 18 mm Shank diameter: 16 mm Cutting length: 60 mm Overall length: 200 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.35 kg Compatibility & assembly Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Indexable-insert format for quick replacement FAQ Which inserts are compatible with this cutter? The cutter accepts APXT 1003 indexable inserts; Korloy-manufactured APXT 1003 inserts are commonly used with this shank milling cutter S184TM (Teknik Makina). How is the tool secured in the spindle and how is the insert fixed? The tool has a 16 mm shank for standard clamping systems; inserts are secured with a Torx screw M2.5x5.5 tightened using a T8 torx key for reliable seating. What are the main cutting dimensions to consider for programming? Key dimensions are Ø 18 mm cutting diameter, 60 mm cutting length, and 200 mm overall length; these values guide depth of cut and reach planning for the S184TM cutter. How many cutting edges does the cutter have and what is the cutting angle? The cutter is equipped with two cutting edges and a 90° cutting angle, providing a balanced geometry for shoulder and face milling operations. Is insert replacement quick and suitable for production environments? Yes — the indexable design and Torx screw fastening enable rapid insert changes, making the Teknik Cutting Tools shank cutter S184TM appropriate for production settings that require short tool-change times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from compatibility with DCMT 0702 indexable inserts, an 18 mm diameter and a 150 mm overall length to achieve reliable, repeatable internal turning; order the K299TM directly via Metav Werkzeuge or consult our specialists for application guidance. Boring Bar S12-16M — for DCMT 0702 Indexable Inserts, 18 mm, L150 A Boring Bar S12-16M designed for use with DCMT 0702 indexable inserts, delivering stable right-hand cutting for precision internal turning and light to medium-duty production work Compatible with DCMT 0702 inserts 18 mm diameter for stable performance 150 mm overall length for extended reach Right-hand cutting, 95° cutting angle Stable insert system for predictable machining results The bar is engineered to accept DCMT 0702 indexable inserts, a widespread standard in turning operations that enables fast re-grading of cutting edges and consistent part quality. The combination of a standard insert size and a precise clamping arrangement reduces unplanned downtime and keeps cycle times low. For shops looking to standardise tooling across multiple machines, this solution supports efficient inventory management while maintaining process reliability. Balanced dimensions that combine reach with stiffness With an effective diameter of 18 mm, a shank diameter of 16 mm and a 150 mm overall length, the design balances reach and rigidity to reduce chatter and improve surface finish. The 95° cutting angle delivers accessible cutting geometry for internal operations, while a cutting height of 40 mm ensures proper insert seating and contact. This configuration is suitable for applications where moderate reach is required without sacrificing stability, making it a practical choice for mixed-shop workflows. Fast, repeatable clamping for reduced maintenance time The insert is secured using a Torx system (Torx T8) with a M2.5x5.5 fastening screw, providing a standardised and secure clamp that simplifies insert changes and torque control. Using a recognised Torx key reduces the risk of screw damage and ensures repeatable clamping force, which protects the insert seat and extends component life. The straightforward fastening concept supports quick servicing routines and predictable tool performance. Practical advantages for production and craft workshops Supplied by Teknik Makina and identified by ISO designation S12-16M, this bar is a compact, lightweight option (approx. 0.187 kg) that integrates easily into established tool sets. The consistent geometry and compatibility with DCMT inserts make it suitable for small-batch work, prototype runs and serial production where repeatability matters. Choosing such standardised components contributes to leaner tooling inventories and smoother shop-floor logistics. For fast supply and expert advice on integrating Teknik Makina tooling into existing processes, contact Metav Werkzeuge for tailored recommendations and reliable delivery from Emmerich. Technical data Article number: K299TM Label: 18 mm Boring bar DCMT 0702 L150mm Product type: Boring bar Manufacturer: Teknik Makina Dimensions & weights Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 40 mm Weight: 0.187 kg Cutting angle: 95° Clamp head width: 11 mm Features & compatibility Compatible with DCMT 0702 indexable inserts ISO designation: S12-16M Cutting direction: right Torx key: T8 Torx screw: M2.5x5.5 SKU: K299TM Brand: Teknik Makina FAQ Which inserts fit this bar? The K299TM boring bar is designed for DCMT 0702 indexable inserts and secures them with the specified Torx screw Is the cutting orientation right-hand or left-hand? This boring bar is configured for right-hand cutting, compatible with standard right-hand turning setups What are the key dimensions to check for machine compatibility? Check the 18 mm diameter, shank diameter 16 mm and 150 mm overall length to ensure adequate clearance and clamping on the toolpost Which fastening tool is required for insert changes? Insert clamping uses a Torx T8 key with a M2.5x5.5 screw for repeatable torque and secure seating How does the S12-16M designation affect selection? The S12-16M ISO designation identifies the bar geometry and mounting interface, helping to match it with holders and machine tool setups Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, left-hand boring bar that combines internal coolant and an 18 mm cutting diameter for consistent bore quality; order the KA518TM directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar A12-16M — 18 mm, internal coolant (Teknik Makina) The boring bar A12-16M for DCMT 0702 indexable inserts is designed for precise left-hand turning and internal coolant operations in production and job-shop environments Internal coolant for consistent tool cooling 18 mm cutting diameter for precise bore sizing 150 mm overall length with 16 mm shank diameter Left-hand cutting, 95° cutting angle compatibility Consistent bore quality through defined geometry and insert compatibility The A12-16M toolholder is engineered to deliver repeatable internal turning performance by pairing a defined 18 mm diameter with a stable tool geometry. Compatible with DCMT 0702 carbide indexable inserts, the design and the 95° cutting angle reduce radial deflection and help maintain tolerances over serial runs. This results in improved cylindricity and surface finish compared with loosely specified alternatives, translating into fewer reworks and predictable cycle times on CNC lathes and turning centres. Controlled heat and chip evacuation for longer insert life Built-in internal coolant directs cooling and lubrication to the cutting zone, which lowers cutting temperatures and flushes chips away from the insert pocket. That targeted coolant supply extends insert life and stabilises cutting forces, so the production process benefits from reduced thermal expansion and steadier tool engagement. For operations where built-up edge or heat-related flank wear is a concern, the internal coolant function supports higher sustained productivity and a consistent part finish. Compact design for secure clamping and easy handling A 16 mm shank combined with a 150 mm overall length delivers a compact package that balances reach with rigidity. The small mass (approx. 0.187 kg) shortens tool-change cycles and reduces spindle load, while the 11 mm clamping head width ensures secure insert retention. Fast, reliable assembly is achieved with the supplied Torx hardware—Torx T8 key and M2.5×5.5 screw—minimising downtime during index and insert changes and helping to maintain concentricity under operational loads. Suitable for production turning where left-hand orientation is required Left-hand cutting orientation is specified where the machining process or machine setup demands it; this tool’s left-hand configuration matches such setups and prevents the need for workpiece re-fixturing. The KA518TM is therefore well suited for niche turning tasks, secondary operations and retrofit tool stations where DCMT 0702 inserts are already in use. For workshops aiming to standardise tooling across multiple machines, this compact, coolant-fed toolholder offers a pragmatic balance of accessibility and machining performance. Contact Metav Werkzeuge for tailored advice on the Teknik Makina KA518TM boring bar with internal coolant and to discuss suitable insert grades and cutting parameters Technical data Article number: KA518TM Product type: Boring bar ISO designation: A12-16M Manufacturer: Teknik Makina Facts Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 40 mm Weight: 0.187 kg Cutting angle: 95° Clamping head width: 11 mm Screw: M2.5×5.5 Torx key: T8 Special features Compatible with DCMT 0702 indexable inserts Internal coolant Left-hand cutting Label: 18 mm boring bar DCMT 0702 L150 mm with internal coolant SKU: KA518TM Manufacturer: Teknik Cutting Tools FAQ What insert type fits this tool? The tool accepts DCMT 0702 indexable inserts; the holder is specified to work with that insert geometry for predictable cutting results. Is the tool coolant-fed? Yes — the KA518TM features internal coolant to supply lubricant directly to the cutting zone and aid chip evacuation. Which cutting orientation does the bar support? This holder is configured for left-hand cutting, suitable for setups that require counter-clockwise tool engagement. What are the key mounting and fastening details? Secure clamping is provided via the included M2.5×5.5 screw and is tightened using a Torx T8 key for repeatable insert retention. What shank and overall dimensions should be considered for machine setup? Important dimensions: 16 mm shank diameter and 150 mm overall length; these determine clamping requirements and reach on the machine. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert clamping, targeted coolant delivery and a compact shank design for reliable milling performance in production environments — order directly via Metav Werkzeuge or consult the sales team for application support. Schaftfräser for ADKT 10T3 – 18 mm shank milling cutter with internal coolant (Teknik Makina) A robust Schaftfräser engineered for stable indexable-insert milling in workshop and light industrial applications 18 mm cutting diameter Internal coolant channel Compatible with ADKT 10T3 inserts 16 mm shank diameter for secure clamping High productivity through an indexable-insert concept The cutter is built around the ADKT 10T3 indexable-insert system, which allows fast insert changes and consistent cutting performance. By using replaceable inserts rather than regrinding a solid tool, the solution reduces downtime and lowers per-part tooling cost. The two-edged configuration supports steady chip load distribution while the compatible insert geometry, endorsed for use with Korloy inserts, simplifies stock management for maintenance teams. Improved tool life and thermal control with internal coolant An integrated internal coolant channel directs cutting fluid precisely to the insert tip, which moderates cutting temperatures and improves chip evacuation. This targeted cooling helps maintain cutting edge integrity over longer cycles and reduces the risk of heat-related wear. For operations where cycle time and repeatability matter, the coolant feed contributes directly to process stability and predictable reconditioning intervals for the insert system. Secure mounting and practical handling in the machine tool Designed with a 16 mm shank diameter and an overall length of 100 mm, the cutter balances rigidity with reach for typical milling set-ups. The 35 mm cutting length offers a defined engagement zone for slotting and peripheral milling tasks. Insert retention is accomplished with a Torx screw ( M2.5x5.5 ) secured via a T8 Torx key, enabling quick, reliable clamp changes during maintenance and minimising handling errors on the shop floor. Practical benefits for workshop procurement and maintenance Compact and lightweight, with a mass of 0.12 kg, the tool is easy to store and swap in multi‑cutter toolholders. The modular design and compatibility with widely available ADKT 10T3 inserts simplify inventory and support predictable replacement schedules. For procurement teams seeking a balance of serviceability and machining performance, this shank milling cutter provides a pragmatic option without requiring bespoke insert types. For enquiries about application suitability or to arrange procurement via Metav Werkzeuge, contact Metav Werkzeuge for tailored advice on Teknik Makina cutters and compatible inserts. Technical Data Article number: S076TM Manufacturer: Teknik Makina Product type: Shank milling cutter SKU: S076TM Dimensions & core data Cutting diameter: 18 mm Overall length: 100 mm Shank diameter: 16 mm Cutting length (shank): 35 mm Number of cutting edges: 2 Weight: 0.12 kg Materials & special features Internal coolant: yes Compatible inserts: ADKT 10T3 Compatible insert manufacturer: Korloy Insert screw: M2.5x5.5 Torx key: T8 FAQ Which insert types fit this cutter? The cutter accepts ADKT 10T3 indexable inserts; Korloy-manufactured inserts in this geometry are compatible with the clamping system. How is coolant delivered to the cutting edge? Internal coolant is fed through the tool body to the insert pocket, ensuring directed cooling at the cutting zone and aiding chip removal during machining. What are the key mounting dimensions to check before ordering? Confirm the 16 mm shank diameter and 100 mm overall length match the machine holder specifications; the SKU for reference is S076TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-based milling solution that combines the ease of indexable insert changes with internal coolant for improved tool life and surface finish; order directly via Metav Werkzeuge or request tailored advice from our specialists. S566-1TM — 18 mm shank milling cutter for BDMT 11T3 indexable inserts (internal coolant) by Teknik Makina S566-1TM is a shank milling cutter designed for BDMT 11T3 indexable inserts, offering internal coolant and a compact geometry for reliable face and slot milling in production and toolroom settings. 18 mm diameter for compact milling Internal coolant for optimised chip evacuation Compatible with BDMT 11T3 indexable inserts 16 mm shank with 44 mm cutting length Increased throughput with insert-based milling The S566-1TM delivers a pragmatic route to higher productivity through its indexable design. Using BDMT 11T3 inserts allows rapid insert replacement without reclamping the tool, reducing machine downtime and simplifying inventory of cutting edges. The combination of an 18 mm cutter diameter and a 16 mm shank makes the tool suitable for tight setups while maintaining stability, and the incorporation of internal coolant improves heat management to extend insert life and maintain consistent surface quality. Consistent results and simplified maintenance A clear benefit of the insert system is predictable maintenance cycles. The tool’s geometry—notably the 44 mm cutting length and the two cutting edges—supports controlled chip formation and even wear distribution, which helps sustain dimensional accuracy over runs. The internal coolant feed reduces thermal distortion at the cutting zone and assists chip evacuation, lowering the risk of built-up edge and improving repeatability across batches. Fast fastenings using a Torx T8 key and M2.5x5.5 screws ensure service tasks are straightforward. Practical workshop integration and tool handling Designed for integration with common insert suppliers, the cutter is explicitly compatible with Kyocera-manufactured inserts for BDMT 11T3, simplifying procurement and replacement. The tool’s modest weight (0.241 kg) and shank form ease handling and tool changes, while the robust indexable approach supports both occasional and continuous use in diverse milling tasks. For scenarios where process parameters need refinement, technical advice is available to match insert grade and cutting data to the material and cutting strategy. For availability and process recommendations on the Teknik Makina S566-1TM with internal coolant, contact Metav Werkzeuge for personalised guidance and stock information. Technical data Article number: S566-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina SKU: S566-1TM Facts Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length (shank): 44 mm Number of cutting edges: 2 Weight: 0.241 kg Special features Internal coolant: yes Insert type: BDMT 11T3 Compatible insert manufacturer: Kyocera Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this milling cutter? The S566-1TM accepts BDMT 11T3 indexable inserts; Kyocera-manufactured BDMT 11T3 inserts are specified as compatible. Is the cutter suitable for through-coolant applications? Yes, the tool features internal coolant to support improved chip evacuation and thermal control at the cutting edge. What shank size is required in the toolholder? The cutter has a 16 mm shank; choose a matching holder or collet system that secures a 16 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Information: Order Number: R311TM Item: End Mill usable with RPMW 0803 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 18mm Cutting Edges: 2 Total length: 150mm Diameter Connection: 16mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com