Gibt es einen Hahn und Kolb Online Shop?

Increase machining efficiency with the combination of internal coolant and compatibility with LNMX 0603 indexable inserts, delivering consistent chip control and prolonged insert life. Benefit from the stable 16 mm shank and 40 mm cutting length for reduced vibration and reliable production. Order the shaft cutter directly via Metav Werkzeuge or request advice from Metav's consultants. Shaft cutter S284-4TM for LNMX 0603 indexable inserts — 18 mm, internal coolant (Teknik Makina) The Shaft cutter S284-4TM is a robust indexable milling tool designed for workshops and production lines using LNMX 0603 inserts, combining coolant-through performance with a compact 18 mm tool body for versatile metalworking tasks 18 mm cutter diameter with 16 mm shank Internal coolant supply for improved chip evacuation Compatible with LNMX 0603 indexable inserts 40 mm cutting length for stable engagement Faster cycles through controlled coolant and chip flow The integration of internal coolant directly to the cutting zone enables effective cooling and chip evacuation, which reduces thermal load on the insert and lowers the risk of built-up edge. With an 18 mm tool diameter and 2 cutting edges, the cutter supports higher metal removal rates while maintaining surface quality. This combination of coolant-through design and optimised geometry translates into shorter cycle times and a reduced frequency of insert changes, improving overall throughput without compromising dimensional accuracy. Rigid shank design for repeatable accuracy and minimal deflection A 16 mm shank provides a secure clamping interface that reduces torsional displacement during heavy cuts, while the 40 mm cutting length limits overhang to help sustain cutting stability. Fast insert securing is achieved with the supplied M3x7 Torx screw and T8 key, enabling quick replacement of LNMX 0603 inserts and minimal downtime. The result is a milling solution that supports consistent surface finishes and repeatable results across batch runs, helping production planners reduce scrap and rework. Easy integration into existing indexable systems and workshop workflows Designed for compatibility with Korloy LNMX 0603 inserts, the tool slots directly into toolholders and systems already standardised on this insert family. The compact mass of the tool and clearly defined mechanical interfaces simplify inventory management and tooling setups. Backed by Metav's experience as a precision partner, the cutter can be specified with confidence for jobs that demand predictable performance and straightforward maintenance, making it a pragmatic option for machining centres and subcontract workshops alike. Contact Metav Werkzeuge for a tailored technical consultation regarding the Teknik Makina shaft cutter and to arrange supply from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: S284-4TM Product: Shaft cutter for LNMX 0603 indexable inserts Manufacturer: Teknik Makina Diameter: 18 mm Shank diameter: 16 mm Overall length: 100 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.14 kg Torx screw: M3x7 Torx key: T8 Internal coolant: yes Special features Compatibility: LNMX 0603 indexable inserts (Korloy) Coolant-through design Compact tool body for reduced overhang Quick insert change with Torx fastening FAQ Which inserts fit this shaft cutter? The shaft cutter accepts LNMX 0603 indexable inserts and is specified for inserts from Korloy in standard configurations. Is the cutter suitable for coolant-through applications? Yes, the tool features internal coolant to feed coolant directly to the cutting edge, improving tool life and chip control. What is the shank size and how does it affect rigidity? The cutter has a 16 mm shank, which offers a secure clamping interface that helps reduce deflection during machining. How are the inserts secured and what tools are needed? Inserts are fastened with an M3x7 Torx screw tightened using a T8 key for quick and reliable replacement. Can the cutter be used in existing toolholder systems? The cutter is designed to integrate into holders compatible with an 18 mm body and a 16 mm shank, facilitating straightforward adoption into current setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust dimensions and proven insert compatibility for reliable, repeatable holemaking: the combination of an 18 mm cutting diameter, a 25 mm shank and compatibility with SPMG 0602 inserts ensures efficient machining and easy tool maintenance — order directly via Metav Werkzeuge or ask the Metav consultants for application guidance. Indexable drill U918TM — 18 mm diameter, SPMG 0602 compatible (Teknik Makina) A precision indexable drill designed for CNC applications, offering a compact overall length and standardised insert compatibility to streamline tool changes and reduce downtime 18 mm cutting diameter 36 mm cutting length 25 mm shank diameter Compatible with SPMG 0602 inserts Faster cycle times through standardised insert technology The indexable insert concept reduces non-productive time: worn tips are replaced instead of regrinding, shortening set-up intervals and improving spindle utilisation. With a 36 mm cutting length and an effective 18 mm diameter, the tool is configured for stable through-hole drilling in common workshop operations. Precision of hole location is supported by the 25 mm shank which offers secure clamping in standard tool holders, while the balanced geometry contributes to consistent chip evacuation and reduced vibration during cuts. Ready integration with common insert brands for supply-chain efficiency Compatibility with established insert types simplifies procurement and inventory. The drill is specified for SPMG 0602 inserts and is listed as suitable for brands such as Taegutec and YG-1, enabling use of widely available grades and chipbreakers. The modest 113 mm overall length and a 56 mm shank engagement length make the tool straightforward to programme into existing tooling plans, while the lightweight design of approximately 0.302 kg aids in dynamic applications where tool mass influences cycle stability. Low-maintenance design that supports production continuity Designed for quick insert indexing and straightforward clamping, the tool minimises maintenance overhead and keeps lines running. The modular nature of the insert system means stockholding focuses on inserts rather than entire cutters, improving cost control across batches. Traceable identification via SKU U918TM supports ordering and tool management within ERP systems, and the use of standardised insert interfaces helps to maintain machining quality with minimal operator training. Contact Metav Werkzeuge for specification support on Teknik Makina tools — request tailored advice for integrating the U918TM into existing processes or to confirm insert grades and delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: U918TM Manufacturer: Teknik Makina Designation: Indexable drill Facts Diameter: 18 mm Cutting length: 36 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 113 mm Weight: 0.302 kg Special features Compatible insert: SPMG 0602 Suitable insert manufacturers: Taegutec, YG-1 SKU: U918TM FAQ Which insert type is required for this tool? The tool is specified for SPMG 0602 indexable inserts; compatible grades from Taegutec and YG-1 can be used with the Teknik Makina indexable drill U918TM. What are the key dimensions to consider for machine setup? Important setup values are the 18 mm cutting diameter, 36 mm cutting length and a 25 mm shank diameter; the overall length is 113 mm, which should be checked against machine clearance. Can the insert system help reduce tooling costs? Yes, the indexable design of the U918TM allows replacement of individual inserts rather than whole cutters, supporting lower tooling expenditure and faster in-line servicing. Is the tool suitable for automated tool management systems? The SKU U918TM and standardised insert interface support integration into tool cabinets and ERP systems for straightforward tracking and replenishment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-precision cut-off capability combined with proven compatibility for ISCAR indexable inserts ensures reliable parting operations and simplified tool planning. Benefit from straightforward reordering using SKU KL18TM via Metav Werkzeuge or contact our consultants for tailored advice. Parting Blades KL18TM — Teknik Makina parting blades with ISCAR insert compatibility The Parting Blades KL18TM are engineered as a compact, indexable-insert solution for precise cut-off and parting tasks in machining environments, suitable for integration with common toolholders and ISCAR insert systems. Teknik Makina quality manufacturing Compatible with ISCAR indexable inserts SKU KL18TM for quick reordering Consistent, controlled parting performance for production workflows The KL18TM family delivers a focused solution for cut-off operations where repeatability and process stability matter. The design concentrates on a narrow cutting profile to reduce chatter and allow predictable material separation; this inherently supports shorter cycle times and fewer scrap parts. By combining a defined cutting geometry with indexable insert use, the system reduces downtime for tool changes and keeps set-up effort to a minimum while maintaining consistent surface finish at the parting line. Seamless compatibility with ISCAR inserts and simplified tooling Compatibility with ISCAR indexable inserts means the KL18TM blades integrate into existing insert inventories and indexable tool strategies. The use of standard insert interfaces permits rapid replacement and economical use of carbide grades selected for specific workpiece materials. This approach reduces tool stock complexity while offering the benefits of replaceable cutting edges: less operator handling of brittle carbide, straightforward seating in the blade pocket, and predictable indexing accuracy that supports repeatable part dimensions. Practical application guidance and process advantages Parting and cut-off operations demand attention to clamping rigidity, correct speeds and feeds, and the right insert geometry. The KL18TM blades are designed to be mounted in common parting toolholders that accept narrow shank blades; correct clamping and minimal overhang are recommended to exploit the blade’s stability. The indexable insert arrangement facilitates selection of cutting grades for a range of workpiece types without changing the blade body, thereby supporting faster material changeovers and keeping the machine ready for the next operation. Procurement, stock policy and workshop integration made straightforward Ordering under SKU KL18TM simplifies procurement and inventory tracking. Metav’s position as a European supply partner offers dependable fulfilment from Emmerich and a broad portfolio that helps reduce supplier fragmentation. This makes it easier to standardise on tooling families and maintain consistent quality across multiple machines or sites. The combination of a modular insert system and a recognised manufacturer enables predictable tool life planning and smoother workshop logistics. For reliable supply of Teknik Makina parting blades (KL18TM) and expert advice on integrating them into existing tool setups, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930; Metav’s consultants will assist with selection and availability. Technical Data Article number: KL18TM Manufacturer: Teknik Makina eClass: 21181018 Facts SKU: KL18TM UID: KL18TM Special features Product type: Parting blades Compatibility: ISCAR indexable inserts Label: Stechschwerter FAQ What insert systems are compatible with these parting blades? The Parting Blades KL18TM are specified for use with ISCAR indexable inserts; the blade pockets accept the standard insert interface used by ISCAR for economical edge changes. Can the KL18TM be used in standard parting toolholders? Yes, the KL18TM blades are intended for mounting in conventional parting toolholders that accommodate narrow shank blades; correct clamping and minimal overhang are recommended to maintain stability. How does the indexable insert approach benefit workshop efficiency? Using indexable inserts with the KL18TM reduces downtime for edge changes, streamlines spare-part inventory, and allows selection of cutting grades without changing the blade body, supporting faster changeovers. Are special cutting parameters required for using these blades? Cutting parameters depend on workpiece material and insert grade; the KL18TM design benefits from firm clamping, controlled feeds and speeds, and inserts matched to the application to avoid chatter and extend edge life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a precise 5° cutting angle, compatibility with DC-- 0702 indexable inserts and compact dimensions for stable, high-quality turning; order the tool via Metav Werkzeuge or consult our specialists for integration advice. S12K SDZCR Boring Bar – 5° for DC-- 0702 indexable inserts, Ø18 mm, shaft Ø12 mm The S12K SDZCR is a right-hand boring bar designed for internal turning with DC-- 0702 indexable inserts, suitable where compact length and repeatable clamping are required for precision machining. 5° cutting angle for fine finishing Compatible with DC-- 0702 indexable inserts Ø18 mm body with 125 mm overall length Shaft Ø12 mm for secure clamping Consistent finish and dimensional control for precision turning The boring bar delivers a controlled cutting geometry thanks to its 5° cutting angle, which reduces cutting forces and improves surface quality on internal bores. The ISO designation S12K SDZCR identifies the toolholder form and ensures compatibility with industry-standard clamping systems. With a body diameter of Ø18 mm and a shaft diameter of 12 mm, the holder offers a compact footprint that supports tight-tolerance operations without sacrificing rigidity. Explanation of terms is straightforward: indexable inserts are replaceable cutting tips (here: DC-- 0702) that allow rapid renewal of the cutting edge without regrinding, reducing downtime and maintaining repeatable results. Greater uptime through stable clamping and prolonged tool life Built for repeatable setups, the toolholder’s geometry and secure shaft Ø12 mm clamping reduce vibration and minimise insert wear, contributing to long tool life and predictable tool-change intervals. The combination of a short 125 mm overall length and the lightweight construction (approx. 0.128 kg) makes the holder easy to mount and balances well in many turret arrangements. For workshops aiming to increase productivity, this translates into fewer interruptions and more reliably achieved cycle-time targets. Where higher surface quality is required, the right-hand cutting orientation and the modest 5° lead angle contribute to stable chip formation and consistent finishing performance. Practical integration into existing tooling systems Compatibility with DC-- 0702 indexable inserts simplifies inventory management: the same insert family can be used across several toolholders, reducing spare-part complexity. The right-hand cutting direction aligns with standard lathe configurations and the S12K ISO form ensures predictable seating and clamping behaviour. For operators with limited exposure to cutting tool nomenclature, the essential facts are: compact diameter, short overall length and standard insert interface — features that make fitting, orientation and commissioning intuitive even under time pressure. Suitable applications and workshop benefits This boring bar is aimed at production and maintenance environments requiring reliable internal turning on steel and similar materials where standard DC-- 0702 inserts are effective. The compact design supports work on smaller bores and confined turret spaces, while the conservative geometry prioritises finish over aggressive stock removal. As part of a tooling strategy, this holder helps reduce the number of bespoke tools needed, supporting Metav’s philosophy of accessible precision and centralised supply from Emmerich: reliable, repeatable tools that suit industry and craft. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools S12K SDZCR boring bar into an existing tool carousel and to confirm insert selection and clamping options Technical Data SKU: K190TM ISO designation: S12K SDZCR Manufacturer: Teknik Cutting Tools Diameter: 18 mm Shaft diameter: 12 mm Overall length: 125 mm Cutting height: 20 mm Weight: 0.128 kg Cutting angle: 5° Cutting direction: right Special features For indexable inserts DC-- 0702 Short, rigid design for confined spaces Lightweight for easy handling Right-hand boring bar configuration FAQ What inserts fit this boring bar? The S12K SDZCR boring bar accepts DC-- 0702 indexable inserts; these standard inserts allow rapid edge renewal and consistent machining performance. Is the tool suitable for use on standard lathes? Yes, the S12K SDZCR is a right-hand boring bar designed for conventional lathe turrets and cartridge-style toolholders that accept ISO‑form boring bars. What are the key dimensions to check before ordering? Confirm the Ø18 mm body, shaft Ø12 mm, and 125 mm overall length against turret clearance and bore reach requirements to ensure correct fit and clamping. How does the 5° cutting angle affect machining? The 5° angle reduces cutting forces and improves surface finish by promoting stable chip flow, making it well suited to finishing passes and applications demanding good surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, precision-engineered boring solution that combines an 18 mm diameter body, compatibility with DC-- 0702 SDUC indexable inserts and a left-hand cutting orientation for predictable chip flow; order directly via Metav Werkzeuge or consult the Metav team for application advice. S14Q SDUCL Boring Bar — left-hand, 18 mm, for SDUC / DC-- 0702 indexable inserts (Teknik Makina) S14Q SDUCL is a purpose-designed boring bar for internal turning operations that accepts SDUC-type indexable inserts and is optimised for left-hand cutting applications Left-hand cutting for specific machining tasks Compatible with DC-- 0702 SDUC indexable inserts 93° cutting angle for reliable chip control Solid 18 mm diameter with 180 mm overall length Stable tooling for consistent internal machining results The S14Q SDUCL is engineered with a focus on rigidity and repeatable geometry. With a nominal 18 mm outer diameter and a 16 mm shank diameter, the component is designed to maximise clamping stability while fitting common toolholders. The 180 mm overall length balances reach with torsional stiffness, so that vibration is minimised and dimensional consistency is promoted across batch runs. These measurable attributes allow machining parameters to be set with confidence and make the tool suitable for workshops that require reproducible bore quality. Economical, precise cutting using indexable inserts This bar is intended for insert-based cutting, accepting SDUC indexable inserts in the DC-- 0702 format. The 40 mm cutting height and 93° cutting angle are chosen to support effective engagement and chip control, particularly in interrupted cuts or when working close to shoulders. Left-hand orientation supports specific toolpaths and lathe setups where the feed direction is reversed. Using indexable inserts ensures rapid edge replacement and consistent cutting geometry, reducing setup time while sustaining cutting performance. Practical benefits for workshop productivity and tool selection The tool’s ISO-style designation and straightforward geometry simplify selection and inventory management. The S14Q SDUCL format is widely recognisable in tooling systems, which helps streamline procurement and replacement. At a measured weight of 0.266 kg, handling and tool change are uncomplicated during setup. Overall, the configuration supports predictable tool life and efficient maintenance routines, delivering operational stability for small to medium-sized production batches. For precision internal turning tasks, rely on Teknik Makina’s S14Q SDUCL boring bar—contact Metav Werkzeuge for technical guidance or to confirm compatibility with existing holders via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K254TM Manufacturer: Teknik Makina ISO designation: S14Q SDUCL Description: SDUC for DC-- indexable inserts Facts Diameter: 18 mm Shank diameter: 16 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.266 kg Cutting angle: 93° Cutting direction: left Special features For SDUC indexable inserts Compatible with DC-- 0702 inserts Left-hand cutting orientation ISO-style boring bar designation FAQ Which inserts are compatible with this boring bar? The S14Q SDUCL boring bar by Teknik Makina is designed for SDUC indexable inserts in the DC-- 0702 size. Is the cutting direction left-hand or right-hand? This tooling is specified for left-hand cutting operations and is supplied accordingly. What are the key dimensions to check for holder compatibility? Check the 18 mm outer diameter, 16 mm shank diameter and 180 mm overall length when matching toolholders for the Teknik Makina S14Q SDUCL (SKU K254TM). How does the 93° cutting angle affect machining? The 93° cutting angle improves chip deflection and supports stable engagement, which is beneficial for consistent bore finishes with the S14Q SDUCL boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 16 mm shank for rigid clamping with compatibility for DC--0702 indexable inserts and a 93° cutting angle results in stable, repeatable internal turning performance; order directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. Boring bar S14Q SDUCR – SDUC indexable holder for DC--0702 inserts, right-hand, 16 mm shank (Teknik Makina) The Boring bar S14Q SDUCR is a right-hand SDUC insert holder designed for accurate internal turning where repeatable insert seating and rigid clamping are required 16 mm shank for rigid clamping Compatible with DC--0702 indexable inserts 180 mm overall length for deep bore reach Right-hand cutting with 93° cutting angle Stable clamping that reduces vibration and improves finish A robust 16 mm shank and compact tool mass of 0.266 kg combine to provide increased rigidity during internal turning operations. The reduced deflection achieved by the larger shank diameter supports consistent chip formation and an improved surface finish on bores. The combination of the 18 mm diameter and the tool’s geometry helps to maintain concentricity, while the 93° cutting angle provides the required clearance for many internal turning tasks. Vibration damping and stable seating are thereby promoted, extending insert life and lowering scrap rates. Efficient insert system for fast, repeatable tool changes The SDUC configuration accepts DC--0702 indexable inserts and is engineered for precise, repeatable seating. The insert pocket geometry is optimised to ensure correct positioning on every fitment, so that tool offsets remain stable after each replacement. The indexable insert system reduces downtime compared with brazed tools since inserts can be rotated or exchanged quickly, and re-establishing cutting parameters is straightforward. This holder is identified as S14Q SDUCR, reflecting its SDUC-style compatibility and right-hand cutting orientation for standard turning cycles. Practical design for workshop and production workflows With an 180 mm overall length and a cutting height of 40 mm, the holder offers reach for deeper bores while keeping overhang manageable for better stability. The compact weight and standard shank size simplify integration into existing tool turrets and adaptors, reducing setup time on tool posts. For repetitive production environments the reduced handling time and consistent seating of inserts contribute directly to higher uptime and predictable machining results. The holder’s clear specification supports process planning and tool inventory management in both jobbing shops and production cells. For application advice, insert selection or to secure stock of the Teknik Makina S14Q SDUCR (SKU K124TM), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for rapid, expert support and supply coordination Technical Data Article number: K124TM Manufacturer: Teknik Makina Model designation: S14Q SDUCR Compatible inserts: DC-- 0702 Cutting direction: right Facts Shank diameter: 16 mm Diameter: 18 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.266 kg Cutting angle: 93° Special features SDUC indexable insert holder Right-hand cutting orientation Designed for DC--0702 indexable inserts ISO designation: S14Q SDUCR Clamping holder reference: 07 FAQ Which indexable inserts fit this holder? The holder is compatible with DC--0702 indexable inserts; the SDUC pocket geometry is designed for secure seating of these inserts. What are the key dimensions for mounting and planning? Shank diameter is 16 mm, overall diameter 18 mm, cutting height 40 mm and overall length 180 mm, as specified for the S14Q SDUCR (SKU K124TM). Is this tool for right-hand or left-hand cutting? This boring bar is configured for right-hand cutting and is marked accordingly in the technical specification. How does the SDUC design benefit production? The SDUC insert pocket ensures repeatable positioning and quick insert changes, reducing downtime and maintaining consistent cutting offsets for series production. What is the ISO designation and who manufactures the tool? The ISO designation is S14Q SDUCR and the tool is supplied by Teknik Makina (SKU K124TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the stable geometry and compact dimensions for consistent external turning results; the combination of a 16 mm shaft and 45 mm cutting height provides a reliable balance between rigidity and accessibility. Order via Metav Werkzeuge or contact the technical team for matching insert options and cutting parameters. S14Q SDUCR Boring Bar – SDUC for DC-- indexable inserts, 180 mm overall length (Teknik Makina) The S14Q SDUCR is a right-hand external turning boring bar designed for use with DC-- 11T3 indexable inserts, suitable for precision turning tasks in machining centres and lathes. ISO S14Q SDUCR designation For DC-- 11T3 indexable inserts Shaft diameter 16 mm Overall length 180 mm Greater rigidity for stable turning and repeatable results The boring bar's configuration focuses on delivering stable cutting through a compact, stiff setup. A shaft diameter of 16 mm combined with an overall length of 180 mm reduces deflection during external turning operations, improving dimensional repeatability and surface finish. For practical machining, the 45 mm cutting height ensures correct insert seating and chip control; this translates into fewer reworks and a more predictable process window, especially when working with standard turning tasks on medium-duty lathes. Fast insert interchange and compatibility to keep cycles moving Designed for SDUC-style tooling, the bar accepts DC-- 11T3 indexable inserts with a straightforward clamping seat and a clamping holder designation of 11, enabling quick replacements and reduced downtime. The right-hand cutting orientation and the ISO S14Q SDUCR form make it straightforward to match the toolholder to existing tool posts and turret stations. As a result, set-up and changeover times are minimised, which supports higher spindle utilisation and a more efficient production schedule. Clear specifications for process planning and tool selection Numerical values are provided so buyers can plan feeds, speeds and holder compatibility unambiguously: cutting angle 93°, bar diameter 18 mm, and a net weight of 0.272 kg. These measurable parameters allow process engineers to calculate stiffness, select appropriate insert grades and determine whether the bar is suited to light finishing or general turning. Using these figures in toolpath simulations or fixture checks reduces trial-and-error on the shopfloor and improves first-off quality. Built for workshop integration and inventory clarity The bar’s compact footprint and standard ISO designation make it easy to catalogue and replenish. The combination of an established ISO code and clear insert family reduces the risk of ordering mistakes and ensures compatibility with common insert geometries. For procurement, the concise technical details support just-in-time restocking and predictable maintenance cycles, which is especially valuable where a single supplier is preferred for consistency and traceability. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools S14Q SDUCR boring bar with SDUC for DC-- indexable inserts can be integrated into existing turning processes; Metav Werkzeuge in Emmerich can provide technical advice and match the correct insert grade for the application. Technical data Article number: K125TM Designation: S14Q SDUCR Product name: Boring bar (SDUC for DC-- indexable inserts) Manufacturer: Teknik Makina Facts Shaft diameter: 16 mm Cutting height: 45 mm Diameter: 18 mm Overall length: 180 mm Weight: 0.272 kg Cutting angle: 93° Cutting direction: Right-hand eClass: 21180806 Special features For indexable inserts DC-- 11T3 Clamping holder designation: 11 ISO designation: S14Q SDUCR SKU: K125TM FAQ Which insert type fits this boring bar? The bar is designed for DC-- 11T3 indexable inserts and seats SDUC-format inserts for secure clamping and correct chip flow with the S14Q SDUCR tool. Is the cutting direction right- or left-hand? This tool is a right-hand external turning bar, intended for conventional right-hand turning operations. What are the key dimensions to check for fitting a toolholder? Important dimensions are shaft diameter 16 mm, overall length 180 mm and the bar diameter 18 mm, which should be matched to the holder and turret pocket. Can this bar be used for finishing passes? With its compact geometry and a 45 mm cutting height, the bar is suitable for general turning and finishing where rigidity and correct insert geometry meet the process requirements. What is the article number for ordering and inventory? Order or reference the product using SKU K125TM, listed under the ISO code S14Q SDUCR. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready solution that combines internal coolant capability, secure clamping and compatibility with CC-- 09T3 indexable inserts for efficient internal machining; order directly via Metav Werkzeuge or consult the Metav team for application guidance. Boring bar KA238TM — SCLC for CC-- 09T3 indexable inserts, 16 mm shank (Teknik Cutting Tools) The Boring bar KA238TM is a left-hand SCLC-style tool designed for precision internal turning with internal coolant and secure clamping for CC-- 09T3 indexable inserts. Internal coolant supply for clean chip evacuation Compatible with CC-- 09T3 indexable inserts 16 mm shank for stable toolholding 180 mm overall length for deep internal reach Precision internal turning with built-in coolant for consistent finishes The bar is engineered for repeatable internal machining thanks to its internal coolant channel that directs cutting fluid close to the cutting edge, reducing heat and improving chip control. The tool accepts CC-- 09T3 inserts, a common blank size that facilitates quick reconditioning and predictable cutting geometry. With a 16 mm shank and a 95° cutting angle, the design prioritises dimensional stability and surface quality, enabling reliable bore finishes even in batch production or CNC turning centres. Secure clamping and quick insert changes to reduce cycle times Clamping is handled via the designated holder arrangement and a precisely dimensioned screw, with a Torx screw M3.5x8.5 and matching T15 key for repeatable tightening. The clamp holder 09 format and a 45 mm cutting height simplify insert seating and replacement, which reduces downtime during tool swaps. The combination of mechanical repeatability and clear torque interface ensures consistent tool projection and run-out control, supporting shorter set-up times and fewer scrap parts. Compact geometry for deep reaches and controlled cutting action A compact overall length of 180 mm overall length combined with an 18 mm diameter cutting head offers deep access without excessive overhang, improving rigidity compared with longer alternatives. The left-hand cutting configuration provides predictable chip flow for specific turning directions and fixture layouts, while the SCLCL-style body supports standard clamping systems. Built for workshops and production environments, the bar balances reach and stiffness to help maintain cutting parameters and extend insert life. For technical specification checks or ordering of Teknik Cutting Tools' KA238TM boring bar, contact Metav Werkzeuge for tailored advice and supply from Emmerich: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA238TM Manufacturer: Teknik Cutting Tools ISO designation: A14-A16Q SCLCL Key figures Diameter: 18 mm Shank diameter: 16 mm Overall length: 180 mm Cutting height: 45 mm Weight: 0.27 kg Cutting angle: 95° Cutting direction: left Torx screw: M3.5x8.5 Torx key: T15 Special features Internal coolant supply For indexable inserts CC-- 09T3 Clamp holder designation 09 SCLCL tool body style FAQ Which insert type is compatible with this boring bar? The KA238TM is compatible with CC-- 09T3 indexable inserts; this pairing ensures correct seating and cutting geometry for internal turning operations. Is the tool suitable for internal coolant use? Yes, the bar features internal coolant to direct fluid to the cutting edge, improving chip evacuation and temperature control during machining. What is the shank diameter and how does it affect rigidity? The 16 mm shank provides a compact but rigid interface for standard toolholders, helping to reduce vibration and enhance accuracy in bore machining. Can the bar be used for right-hand cutting? This specific model is specified as left-hand cutting; right-hand cutting applications require the corresponding right-hand version. What fastening hardware is required for insert changes? Insert clamping uses a Torx screw M3.5x8.5 secured with a T15 key, allowing repeatable torque and quick insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable left‑hand machining performance is provided by the S14Q SCLCL drill bar with a 16 mm shank and a 95° cutting angle; compatible with CC-- 09T3 indexable inserts, it combines rigidity and accessibility for compact internal turning tasks. Order the tooling via Metav Werkzeuge or consult their specialists for application advice. Drill Bar SCLC for CC-- Indexable Inserts — S14Q SCLCL, 16 mm shank | Teknik Makina The Drill Bar SCLC for CC-- Indexable Inserts is a left‑hand internal boring solution designed for precision turning and tight‑access operations, compatible with CC-- 09T3 indexable inserts. Left-hand cutting orientation Compatible with CC-- 09T3 inserts 16 mm shank diameter for secure clamping Precise left‑hand internal turning for constrained bores The left‑hand configuration and the 95° cutting angle provide a practical advantage when machining asymmetrical or constrained workpieces, allowing cleaner approach paths and safer tool entry in reverse‑direction operations. As a robust boring solution, this bar accepts standard CC-- 09T3 indexable inserts, which permit fast edge changes and consistent cutting geometry. The combination of a defined cutting angle and insert compatibility leads to more predictable chip control and repeatable bore quality, reducing rework and improving production throughput. Reduced deflection through compact dimensions and secure clamping A 16 mm shank with a relatively short overhang supports high rigidity and lowers vibration during cutting, which directly benefits surface finish and dimensional accuracy. With an overall length of 180 mm, the design balances reach and stiffness for internal turning on small to medium lathes and machining centres. The low mass (approx. 0.271 kg) further limits inertial forces during rapid direction changes, while the ISO designation S14Q SCLCL clarifies the mounting and orientation for straightforward set‑up. These measurable dimensions serve as a reliable basis for fixture planning and ensure consistent clamping behaviour under industrial conditions. Faster indexable insert changes and production reliability The S14Q SCLCL toolholder is engineered for routine production: it uses standard indexable inserts that shorten downtime and lower tooling costs through multiple usable cutting edges. The clear compatibility with CC-- 09T3 inserts means spare parts are widely available, simplifying inventory management. For shops seeking a balance between accessibility and repeatable performance, the combination of a compact boring bar and indexable inserts delivers improved cycle times and easier quality control. If material hardness or specific geometries require confirmation, technical guidance is available to match insert grades and cutting data to the application. For reliable left‑hand internal turning solutions from Teknik Makina, contact Metav Werkzeuge for tailored recommendations or to order the S14Q SCLCL (SKU K238TM) — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K238TM Manufacturer: Teknik Makina Designation: SCLC for CC-- Indexable Inserts (S14Q SCLCL) Compatible inserts: CC-- 09T3 Cutting direction: left Facts Shank diameter: 16 mm Cutting height: 45 mm Cutting angle: 95° Overall length: 180 mm Diameter: 18 mm Weight: 0.271 kg Special features ISO designation S14Q SCLCL Left‑hand version Clamp size: 09 Intended for indexable insert mounting Brand: Teknik Makina FAQ What inserts fit this boring bar? The boring bar accepts CC-- 09T3 indexable inserts; the S14Q SCLCL holder is configured to secure and locate these standard inserts reliably for consistent cutting geometry. Is this tool suitable for left‑hand internal turning on small lathes? Yes. The left‑hand orientation and the 16 mm shank make the bar appropriate for compact setups where a shorter overhang and secure clamping improve stability. What does the ISO designation S14Q SCLCL indicate? The ISO code describes the holder style and mounting arrangement; S14Q SCLCL identifies the toolholder geometry and orientation used to seat CC-- 09T3 inserts correctly. How does the 95° cutting angle affect machining? A 95° cutting angle provides a near‑radial approach that helps with chip formation and edge engagement in internal turning, supporting repeatable bore quality and effective chip evacuation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable milling performance meets straightforward maintenance: compatibility with BDMT 11T3 indexable inserts and a 16 mm shank deliver stable cutting and predictable tool life, while the quick Torx clamping reduces downtime. Order the Shank cutter S566TM directly via Metav Werkzeuge or ask our consultants if needed. Shank cutter S566TM — 18 mm, for BDMT 11T3 indexable inserts (Teknik Makina) The Shank cutter S566TM is a compact milling tool designed for use with BDMT 11T3 indexable inserts, offering a rigid 16 mm shank for reliable workshop integration. Indexable system for BDMT 11T3 inserts 16 mm shank for high rigidity 18 mm diameter with 90° cutting angle Fast insert clamping with Torx M2.5x5.5 Consistent indexable performance for shorter cycle times The tool is built around the BDMT 11T3 indexable system, which simplifies tool management and reduces setup complexity. Thanks to the standardised insert interface and Kyocera compatibility, spare parts and replacements are straightforward. The combination of a compact 18 mm cutting diameter and a secure Torx fastening (Torx M2.5x5.5 with T8 key) delivers predictable clamping force, translating into stable cutting conditions and fewer micro-adjustments between cycles. This consistency supports faster production rhythms and lowers overall process variance. Built for rigidity and predictable surface quality A solid 16 mm shank and a 44 mm cutting length provide the mechanical stiffness required for repeatable machining results. The cutter’s 2-flute geometry and a 90° cutting angle are selected to balance chip evacuation and tool engagement, which helps maintain edge condition over time. As a result, operators benefit from improved surface finish and reduced vibration, meaning less rework and longer intervals between insert changes. The tool’s overall length of 150 mm offers a practical reach while maintaining torsional stability. Designed for quick maintenance and smooth workshop flow Serviceability is a key advantage: insert changes are executed via the Torx clamping screw, minimising downtime and allowing the workshop to maintain throughput. The S566TM’s lightweight construction (approx. 0.24 kg) eases handling during set-up and reduces spindle load during acceleration. Clear, standardised dimensions—16 mm shank, 18 mm diameter, 44 mm cutting length—enable straightforward tool list management and inventory control. Reliable supply and a quality filter from Metav Werkzeuge in Emmerich ensure rapid replenishment so production can continue without lengthy interruptions. Contact Metav Werkzeuge for supply and application advice on the Teknik Cutting Tools S566TM, supplied directly from Emmerich and ready to integrate into workshop production Technical Data SKU: S566TM Manufacturer: Teknik Makina Article name: Shank cutter for BDMT 11T3 indexable inserts Compatible inserts: BDMT 11T3 Compatible insert manufacturer: Kyocera Core specifications Shank diameter: 16 mm Cutting diameter: 18 mm Cutting length: 44 mm Overall length: 150 mm Number of flutes: 2 Cutting angle: 90° Weight: 0.24 kg Features & compatibility Torx screw: M2.5x5.5 Torx key: T8 For BDMT 11T3 indexable inserts Designed for indexable milling applications FAQ Which inserts fit this cutter? The cutter is designed for BDMT 11T3 indexable inserts; compatible inserts from Kyocera are supported. What is the shank diameter and why it matters? The 16 mm shank of the S566TM provides increased rigidity and helps to reduce vibration for more consistent machining results. How is the insert secured? Inserts are clamped with a Torx screw M2.5x5.5, loosened and tightened using a T8 key for quick, repeatable clamping. How many cutting edges are available? The tool features 2 flutes, balancing chip clearance and engagement for typical indexable insert operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from robust insert clamping, integrated internal coolant and a compact 16 mm shank for consistent milling performance; order the cutter directly via Metav Werkzeuge or consult our tooling specialists for application support. 18 mm Shank Milling Cutter S174-1TM – Shank milling cutter for APKT 1003 indexable inserts, internal coolant (Teknik Makina) The shank milling cutter S174-1TM is designed for secure insert retention and efficient chip evacuation in general workshop and light industrial milling applications. 18 mm cutter diameter with 150 mm overall length Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts (Korloy) Robust 16 mm shank, two cutting edges Longer uninterrupted cycles through optimal coolant routing The integrated internal coolant circuit channels cutting fluid directly to the cutting zone, which reduces heat build-up and supports stable cutting conditions. This targeted cooling shortens tool-change intervals and helps to maintain consistent cutting forces, resulting in longer uninterrupted machining cycles and improved process reliability. For operations requiring sustained contact with the workpiece, the focused coolant supply contributes to more predictable tool life and repeatable results. Secure clamping and reduced vibration for consistent surface quality A rigid 16 mm shank combined with precise insert mounting delivers high torsional stability and reduced vibration during milling. The two-cutting-edge configuration promotes balanced load distribution across the insert seats, improving surface finish and dimensional consistency. These mechanical advantages translate into fewer reworks and a more stable production output when performing slotting, shoulder milling or light face milling tasks. Flexible compatibility for quick integration into existing toolsets Designed to accept APKT 1003 indexable inserts and compatible with Korloy-specified grades, the cutter adapts to diverse machining tasks by simply selecting the appropriate insert geometry and grade. The 150 mm overall length with a 50 mm cutting-head length gives a versatile reach for typical workshop set-ups, while the compact diameter supports tight fixture clearances. This flexibility allows for straightforward tool changeover and rapid adaptation to different machining programmes. Fast insert changes and straightforward maintenance Insert retention uses a Torx system with a T8 key and a standard M2.5×5.5 screw, enabling quick and safe insert replacement with commonly available maintenance tools. The simple fastening method reduces downtime during routine service and supports controlled torque application to maintain clamping reliability. Regular inspection and correct torque on the replacement screws help preserve the cutter’s repeatable performance over multiple insert life cycles. For specification checks, cutter selection or to arrange supply from Emmerich, contact Metav Werkzeuge for expert assistance and fast delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S174-1TM Manufacturer: Teknik Makina Product: Shank milling cutter for APKT 1003 indexable inserts Dimensions & core data Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.246 kg Features & compatibility Internal coolant: yes Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5×5.5 FAQ How are inserts secured in this cutter? The inserts are secured with a Torx screw (M2.5×5.5) using a T8 tool; the S174-1TM by Teknik Makina uses standardised clamping for quick and reliable changes. Is the coolant internal or external? The cutter is fitted with internal coolant, which directs fluid to the cutting zone to improve chip evacuation and thermal control. Which insert type fits this cutter? This shank milling cutter accepts APKT 1003 indexable inserts and is compatible with inserts from Korloy. What shank diameter is required for the holder? The tool features a 16 mm shank, suitable for holders and collets designed for that diameter. What operations is the cutter best suited to? The design supports a range of milling tasks including light face milling, shoulder milling and slotting where compact diameter and coolant-fed performance are advantageous. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable drilling solution with an 18 mm bore and 54 mm cutting length, combined with a 25 mm shank that improves clamping rigidity; order the Teknik Makina U310TM indexable drill directly via Metav Werkzeuge or ask the consultants for tailored recommendations. Teknik Makina U310TM indexable drill — 18 mm Ø, 54 mm cutting length The Teknik Makina U310TM indexable drill is an industrial drilling tool engineered for repeatable hole-making in CNC production, designed to accept Taegutec SOMT 0602 inserts. 18 mm diameter for consistent bore size 54 mm cutting length for deep-hole capability 25 mm shank for secure clamping Compatible with Taegutec SOMT 0602 inserts Faster cycle times through longer effective cutting length The combination of a 54 mm cutting length and an 18 mm nominal diameter allows fewer passes when producing medium-depth bores, which reduces spindle time and increases throughput. Using indexable insert technology, the cutting edges are replaceable, so tool changeovers are quicker than regrinding solid carbide tools; this lowers downtime and contributes to a better cost-per-hole ratio. The design aims to keep vibration low, helping to maintain bore tolerance and surface quality during repetitive runs. Secure clamping and stable geometry for accurate bores A 25 mm shank and a shank length of 56 mm provide a firm connection to the toolholder, improving axial and radial stability. Reduced runout from a correctly seated shank translates into more consistent hole diameters and longer insert life. The overall length of 132 mm balances reach with stiffness, while the modest mass (0.327 kg) helps prevent undue spindle load. In practical terms, this yields reproducible results across batches and supports tighter process control in serial machining. Simple integration and replaceable insert system The tool is specified for SOMT 0602 inserts and is compatible with inserts from Taegutec, making it straightforward to source replacements and grades appropriate for different workpiece materials. Indexable inserts mean that only the cutting tips are consumed during use rather than the entire body, which simplifies inventory and can reduce tooling costs in the long term. The U310TM is therefore suited to production environments that require reliable, maintainable tooling and clear replacement workflows. Request a tailored technical recommendation from Metav Werkzeuge for the Teknik Makina U310TM indexable drill — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to align the tool with the application requirements. Technical data Article number: U310TM Manufacturer: Teknik Makina Product type: Indexable drill Core dimensions Diameter: 18 mm Cutting length: 54 mm Shank diameter: 25 mm Shank length: 56 mm Overall length: 132 mm Weight: 0.327 kg Features Compatible insert: SOMT 0602 Compatible insert manufacturer: Taegutec Replaceable indexable inserts FAQ Which insert size does this drill accept? The U310TM accepts SOMT 0602 indexable inserts, compatible with inserts offered by Taegutec. What are the main dimensions to consider for tooling and setup? Key dimensions are 18 mm diameter, 54 mm cutting length, 25 mm shank diameter, 56 mm shank length and 132 mm overall length; the tool weight is 0.327 kg. Is the shank suitable for secure clamping in standard toolholders? Yes, the 25 mm shank diameter with a 56 mm engagement length is intended to provide stable clamping and reduce runout when used with appropriately sized holders. How does the indexable concept benefit production workflows? Replaceable SOMT 0602 inserts allow rapid edge changes without removing the tool body, reducing downtime and simplifying stock management of cutting edges. For which kind of machining is this tool intended? The design targets serial CNC drilling operations where repeatability and straightforward insert replacement are priorities; tool-holder compatibility should be checked against the listed shank dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable insert design with a precise Ø18 mm drilling diameter and a 54 mm cutting length to increase throughput and reduce tool changes; order or request advice via Metav Werkzeuge for fast delivery and application support. Indexable Insert Drill – Teknik Makina; Ø18 mm, SPMG 0602 compatible Indexable Insert Drill for productive holemaking in industrial machining, designed as a drill body that accepts SPMG 0602 inserts for fast material removal and repeatable hole quality. Ø18 mm cutting diameter 25 mm shank for secure clamping Compatible with SPMG 0602 inserts 131 mm overall length for deeper holes Increased material removal with predictable chip control The indexable design delivers high material removal while keeping machining stable: the replaceable SPMG 0602 inserts provide a consistent cutting geometry that reduces vibration and improves repeatability. Because the tool accepts inserts from recognised makers such as Taegutec and YG-1, tool life is extended through economical index changes rather than full-body replacement. This approach keeps machining cycles productive while containing tooling expenditure and downtime. Secure clamping and tool rigidity for stable bore quality A straight 25 mm shank and a balanced body length ensure the tool maintains rigidity in common drilling setups, which helps preserve concentricity and surface finish. The combination of shank diameter and overall tool length of 131 mm gives a favourable length-to-diameter ratio for workshop milling machines and turret lathes, reducing deflection risk. The measured weight of 0.327 kg contributes to handling ease without compromising stability during high-feed operations. Compatibility and simple maintenance for uninterrupted production Compatibility with SPMG 0602 inserts and support for insert brands like Taegutec and YG-1 simplifies inventory management and replacement logistics. Replacing an insert restores cutting geometry instantly, which shortens maintenance time and keeps production running. The moderate 54 mm cutting length suits common through-hole and shallow blind-hole tasks, while the tool body design minimises set-up complexity across different machines. Built for workshop reliability and supplier confidence Designed and offered through established channels, the drill body aligns with the Metav promise of accessible precision: a dependable supply chain from Emmerich supports European workshops with consistent stock and accountable delivery. The industrial-focused construction and insert strategy create a reliable tool solution for fabricators and subcontractors who require repeatable hole quality and straightforward serviceability. Contact Metav Werkzeuge for a specification review or to discuss compatible inserts and delivery options; call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange a technical consultation and secure supply through Metav Werkzeuge. Technical data Article number: U818TM Manufacturer: Teknik Makina Facts Diameter: 18 mm Overall length: 131 mm Cutting length: 54 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.327 kg Special features Compatible inserts: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Indexable insert drill body design Suitable for industrial machining setups FAQ What insert type does the Indexable Insert Drill accept? The Indexable Insert Drill accepts SPMG 0602 inserts; Teknik Makina supplies the U818TM body configured for these insert geometries. Can the drill body use inserts from other manufacturers? Yes, the tool is compatible with inserts from recognised suppliers such as Taegutec and YG-1, enabling flexible procurement for the U818TM drill body. What hole depth is achievable with this tool? With an overall length of 131 mm and a cutting length of 54 mm, the drill body is designed for standard through-holes and moderate blind holes in workshop applications. Is the shank suitable for standard tool holders? The straight 25 mm shank ensures secure clamping in common holders and chucks, supporting stable performance during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable insert drill body that combines precise Ø18 mm cutting with a secure 25 mm shank and a 36 mm cutting length for reliable cycle times; order the tool through Metav Werkzeuge or consult their specialists for application guidance. Teknik Makina Indexable Insert Drill Body U106TM – Ø18 mm, 25 mm shank The indexable insert drill body U106TM is built for industrial drilling with replaceable inserts, offering a compact overall length and a stable shank for secure clamping in production environments. For Korloy WCM-0302 indexable inserts Diameter 18 mm for medium drilling 25 mm shank ensures stable clamping 36 mm cutting length for deep passes Precision, replaceability and reduced machining costs The design of this indexable insert solution places emphasis on repeatable hole quality and cost efficiency through replaceable cutting edges. The Ø18 mm cutting diameter combined with a 36 mm cutting length allows the tool body to perform reliable bore creation without full-body replacement — insert changes restore cutting geometry quickly, lowering per-hole tooling costs. The modular concept reduces downtime compared with solid drills and supports steady production throughput while maintaining dimensional accuracy. Stable clamping and predictable tool behaviour With a 25 mm shank and an overall length of 113 mm the tool body delivers secure clamping and improved rigidity in a standard toolholder. Stable fixation reduces vibration, which in turn improves surface finish and extends insert life. At a listed weight of 0.303 kg the component is easy to handle during tool setup and replacement, while the deliberate shank geometry ensures compatibility with common toolholders for consistent centring and torque transmission. Practical application and compatibility in workshop setups This drill body is specified for use with Korloy indexable inserts, specifically WCM-0302, enabling quick insert swaps and predictable performance across series production runs. The compact cutting length and moderate overall length make the component well suited to machining centres and CNC lathes where medium-depth bores are required. For procurement or process integration the body offers a pragmatic route to minimise tool inventory — keep a stock of inserts rather than multiple complete drills — and streamline maintenance cycles. For tailored advice on integrating the Teknik Makina U106TM indexable insert drill body into production, or to arrange supply via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: U106TM Manufacturer: Teknik Makina Product type: Indexable insert drill body Facts Diameter: 18 mm Overall length: 113 mm Cutting length: 36 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.303 kg Special features Compatible insert type: WCM-0302 Compatible with Korloy indexable inserts SKU: U106TM FAQ Which insert type fits this drill body? The drill body accepts WCM-0302 indexable inserts, as specified for the U106TM. Is the shank compatible with standard 25 mm toolholders? Yes, the 25 mm shank is intended for secure clamping in standard 25 mm holders and provides stable fixation. What is the usable cutting length of the tool? The usable cutting length is 36 mm, suited to medium-depth bore operations. Can insert changes be performed quickly on the production line? Replaceable inserts allow fast swaps; the concept is designed to reduce downtime compared with replacing complete solid drills. Which manufacturer produces this drill body? This drill body is supplied by Teknik Makina and listed under SKU U106TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine precise medium-bore performance with robust shank stability and indexable-insert efficiency to keep production runs consistent and maintenance predictable; order the tool via Metav Werkzeuge or ask our advisors for application support. Solid drill U014TM by Teknik Makina — 18 mm diameter, compatible with SPMT 0602 inserts The Solid drill (Vollbohrer) designed for indexable-insert drilling in CNC turning and milling setups, delivering consistent bore quality for production and workshop environments Compatible with Korloy SPMT 0602 inserts 18 mm diameter for medium bore machining 25 mm shank for secure clamping 54 mm cutting length for deep, controlled cuts Increased process stability through optimised geometry The solid tool is engineered to offer consistent bore quality across batch production. With an 18 mm nominal diameter and a 25 mm shank, the design prioritises torsional rigidity and reduced run-out, which translates into fewer rejected parts and longer tool life. The geometry is suitable for conventional holders on lathes and milling heads, enabling steady feeds and minimised vibration when combined with correct clamping practice. This results in a measurable improvement in machining predictability and a reduced need for rework. Efficient material removal with indexable inserts Using SPMT 0602 inserts allows fast insert changes and predictable cutting conditions. The 54 mm cutting length gives a good balance between reach and stiffness for through and medium-depth drilling, while the indexable system supports cost-effective upkeep: worn inserts can be replaced quickly without discarding the body. Compatibility with Korloy inserts ensures broad availability of grades for different workpiece materials, so process planners can select grades optimised for steel, stainless or non-ferrous applications to meet cycle-time and surface-quality objectives. Practical workshop advantages and handling Weighing 0.327 kg and measuring 131 mm overall length, the tool is compact enough for standard tool magazines and easy manual handling during set-up. The 56 mm indicated holder or clamping length supports secure seating in collet chucks or DIN-style holders, reducing the risk of slippage. Where repeatability matters, the use of an indexable system reduces downtime for regrinding and keeps maintenance predictable. Documentation and drawing files are available for integration into tool lists and CAM setups, aiding fast tool changeover planning. Reliable sourcing and traceable specification The item is offered under SKU U014TM by Teknik Makina, with clear numeric specifications to support procurement and quality checks. The combination of a robust 25 mm shank, an 18 mm bore diameter and compatibility with SPMT 0602 indexable inserts creates a cost-aware solution for workshops that require repeatable, serviceable drilling. Technical data and file references are supplied for validation against machine tool capabilities and clamping standards. For secure procurement of Teknik Makina's U014TM solid drill and tailored application advice, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification matching and order support Technical Data SKU: U014TM Manufacturer: Teknik Makina Diameter: 18 mm Overall length: 131 mm Cutting length: 54 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.327 kg Compatible insert: SPMT 0602 (Korloy) Core specifications Diameter: 18 mm Overall length: 131 mm Cutting length: 54 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.327 kg Special features For SPMT 0602 indexable inserts Compatible with Korloy inserts Solid drill design Files available: 62de7dd60f56dbb4de4dbedc, 62de7ec2148ec6b71020ffa4 FAQ What insert type does the tool use? The solid drill uses SPMT 0602 indexable inserts; Korloy grades are compatible for a variety of workpiece materials. Which diameter and length specifications are relevant for setup? Set-up parameters reference the 18 mm diameter, 54 mm cutting length and 25 mm shank; the item is listed as SKU U014TM. Is the tool suitable for production on CNC lathes and milling machines? Yes, the design is optimised for CNC applications where indexable-insert drilling supports fast insert changes and repeatable results. How does the indexable system reduce downtime? By enabling quick replacement of SPMT 0602 inserts, maintenance is simplified and the body remains in service, reducing tool-change and regrinding time. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable design that pairs a Ø 18 mm cutting diameter with a 25 mm shank for stable clamping and reliable chip evacuation; the tool’s 54 mm cutting length and 131 mm overall length support productive cycle times while minimising tool change interruptions. Order the indexable drill directly via Metav Werkzeuge or consult their specialists for application advice. Vollbohrer — Indexable drill, Ø 18 mm, 25 mm shank (Teknik Makina) The Vollbohrer is an indexable insert drill engineered for precision holemaking in machining centres and toolroom applications, combining a medium cutting length with a robust shank for stable performance across standard drilling tasks Compatible with Korloy inserts WCM-0302 Ø 18 mm for standard bore sizes 25 mm shank for secure clamping 54 mm cutting length, 131 mm overall Consistent hole quality with measurable process gains The indexable design delivers reproducible results: a Ø 18 mm nominal diameter and 54 mm cutting length ensure defined engagement with the workpiece, while the precision-ground geometry reduces runout. In production terms, this means fewer rework cycles and a shorter machining time per hole, supporting higher throughput. The tool’s combination of cutting length and rigid shank is particularly suited to applications where dimensional stability and surface finish are critical, such as medium-depth blind or through holes in component manufacture. Fast insert changes and predictable downtime reduction Compatibility with WCM-0302 inserts and the match to Korloy indexable plates simplifies maintenance and spare-part logistics. Insert replacement is straightforward and repeatable, which reduces machine downtime and keeps setup variation low. For engineering teams, this translates into quantifiable efficiency: quicker tool service intervals and predictable tooling costs thanks to standardised insert sizes and proven clamping principles. Stable clamping for improved concentricity and tool life A 25 mm shank and a 56 mm shank length provide the rigidity needed for secure clamping in standard toolholders, while the 131 mm overall length balances reach and deflection resistance. The tool’s modest mass (approx. 0.332 kg) supports dynamic stability during rotary machining and helps to limit vibration at typical spindle speeds. The result is enhanced concentricity, reduced wear on cutting edges and longer intervals between adjustments—advantages that contribute directly to part conformity and production reliability. Built for shop-floor efficiency and straightforward integration Designed for CNC centres and toolrooms, this indexable drill suits repetitive production and versatile setups alike. Its standard dimensions and compatibility with widely available inserts make it easy to integrate into existing tooling systems, lowering the barrier to adoption. Process planners will note the pragmatic balance between stiffness and reach, which helps maintain cycle-time targets while controlling consumable usage—attributes that support both small-batch flexibility and larger-scale production runs. For procurement of the Teknik Makina indexable drill or for an application assessment, contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com to arrange delivery and technical consultation Technical data SKU: U146TM Manufacturer: Teknik Makina Diameter: 18 mm Overall length: 131 mm Cutting length: 54 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.332 kg Compatible inserts: WCM-0302 Compatible insert manufacturer: Korloy Product designation: Vollbohrer FAQ What insert type does this indexable drill use? The indexable drill accepts WCM-0302 inserts; Korloy plates are specified for straightforward replacement with established insert geometries. Which machines and setups are suitable for this drill? The tool is intended for machining centres and toolrooms where a 25 mm shank can be clamped securely; the balance of reach and stiffness makes it suitable for standard drill holders. How does the shank size affect performance? A 25 mm shank increases clamping stability, improving concentricity and reducing vibration; this contributes to longer insert life and consistent hole tolerances with the Vollbohrer. Is this drill appropriate for deep-hole drilling? With a 54 mm cutting length and 131 mm overall length, the tool is optimised for medium-depth holes; for deeper specialised operations, a tool with a longer cutting length should be considered. What are the handling and maintenance benefits of the indexable concept? Indexable inserts permit rapid replacement of worn cutting edges without regrinding the body, reducing machine downtime and simplifying inventory management of spare parts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a cost-efficient, indexable design combined with stable clamping and an extended cutting reach to keep machining cycles productive and predictable — order the insert drill directly via Metav Werkzeuge or consult our technical team for application advice. Insert drill U604TM — 18 mm diameter, Korloy indexable-insert compatible (Teknik Makina) The Insert drill U604TM is an indexable-insert drill designed for precise drilling tasks where quick insert changes and consistent hole quality are required, compatible with Korloy WCM-0302 inserts 18 mm cutting diameter Compatible with Korloy WCM-0302 inserts 72 mm cutting length for deeper holes 25 mm shank diameter for secure clamping Consistent hole quality with an indexable design The insert concept delivers a repeatable drilling routine: the 18 mm cutting diameter and 72 mm cutting length permit deeper through-holes while maintaining consistent geometry, which makes it suited to serial production where repeatability matters. Because the head accepts Korloy WCM-0302 indexable inserts, worn cutting edges can be replaced quickly, lowering downtime and reducing per-hole tooling costs. The tool body is engineered for stable contact with the holder, so concentricity and surface finish are supported by the overall tool geometry rather than a single disposable element. Secure mounting for reliable machining cycles A 25 mm shank and a 56 mm connection length provide a robust interface with standard tool holders; the 149 mm overall length gives reach without compromising stability. This balance between reach and shank rigidity helps to reduce vibration in typical setups, so a steady feed can be maintained and tool life extended. The relatively light mass (0.355 kg) simplifies handling during tool changes and minimises additional load on the spindle for improved balance. Lower operating costs through fast maintenance The U604TM’s indexable system is designed to keep maintenance both simple and economical: compatible WCM-0302 inserts from Korloy are widely available and can be rotated or replaced without removing the drill from the machine in many setups, reducing turnaround. The combination of an exchangeable cutting edge and a durable tool body supports a predictable replacement cycle, helping to plan consumables and inventory. Teknik Makina’s construction focuses on pragmatic serviceability, translating into less unexpected downtime and a better total cost of ownership. For reliable, Korloy-compatible drilling performance choose the Teknik Cutting Tools insert drill U604TM — contact Metav Werkzeuge for tailored advice or to secure supply from our Emmerich hub. Technical data Article number: U604TM Manufacturer: Teknik Makina Facts Cutting diameter: 18 mm Shank diameter: 25 mm Cutting length: 72 mm Connection length: 56 mm Overall length: 149 mm Weight: 0.355 kg Special features Compatible insert type: WCM-0302 Insert manufacturer: Korloy Indexable-insert drill FAQ What inserts does this drill accept? The U604TM accepts Korloy WCM-0302 indexable inserts as specified for the tool head. What is the cutting length and why does it matter? The 72 mm cutting length provides the reach necessary for deeper holes while maintaining tool stability for consistent hole geometry. Which shank diameter is required for clamping? A 25 mm shank provides a standard clamping interface for secure mounting in compatible holders. How does the indexable design affect running costs? The indexable concept used on the U604TM reduces running costs because inserts can be rotated or replaced quickly, lowering downtime and per-cutting-edge expenses. Is the tool suitable for serial production? Yes — the combination of a repeatable indexable system and a robust tool body makes the U604TM appropriate for serial drilling tasks where predictable performance is essential. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product data inconsistent: the item is named "Vollbohrer" (solid drill) while the specifications list compatibility with indexable inserts (WCM-0302, Korloy), which raises concerns about the accuracy of the provided information and whether the description aligns with the actual product functionality; this discrepancy could lead to confusion for users or buyers relying on the data, so it is essential to verify the source data thoroughly to ensure that the naming, specifications, and intended use of the product are correctly represented and consistent across all documentation and listings to avoid potential misunderstandings or errors in application.

Take advantage of a robust, indexable drilling solution that combines reliable chip control with straightforward toolholding: the design supports SPMG 0602 inserts, an 18 mm cutting diameter and a compact 25 mm shank for stable clamping. Order the tool directly via Metav Werkzeuge or consult our technical team for application matching. Indexable drill body – 18 mm diameter, SPMG 0602 compatible by Teknik Makina The indexable drill body is engineered for industrial holemaking with replaceable SPMG inserts and is suited to production and workshop drilling operations where quick insert changes and stable clamping are required Indexable design for SPMG 0602 inserts 18 mm cutting diameter 25 mm shank diameter 149 mm overall length Stable cutting performance for repeatable holes The modular design delivers stable cutting and consistent bore quality even in repetitive production runs. With an 18 mm cutting diameter and a 72 mm cutting length, the body provides sufficient engagement for many standard holemaking tasks while limiting overhang. The solid 25 mm shank ensures secure clamping in standard holders, reducing vibration and improving concentricity. These mechanical characteristics translate into lower scrap rates and fewer reworks in serial machining. Quick insert changes and broad compatibility Designed for SPMG 0602 indexable inserts, the holder accepts inserts from established suppliers such as Taegutec and YG-1, simplifying stock management. The insert-style concept shortens maintenance cycles: worn carbide inserts can be rotated or replaced without removing the tool body, which saves setup time and keeps machines productive. The compact overall length of 149 mm and the clearly defined clamping length support straightforward tool presetting and repeatable tool offsets at the machine. Workshop integration and operational reliability Weighing just 0.35 kg, the unit is easy to handle during changeover and presetting, while the robust geometry supports repeatable accuracy across batches. The combination of a concise cutting length and standard shank diameter fosters compatibility with a wide range of toolholders and adaptors. For shops aiming to streamline tool inventories, this drill body reduces the number of dedicated tools required, because insert families and compatible grades from major vendors cover diverse material needs. Contact Metav Werkzeuge for tailored application advice on Teknik Makina indexable drill bodies and to confirm the correct insert grade and holder setup for a given machining task Technical data Article number: U718TM Manufacturer: Teknik Cutting Tools / Teknik Makina Core measurements Diameter: 18 mm Overall length: 149 mm Cutting length: 72 mm Shank diameter: 25 mm Shank/clamping length: 56 mm Weight: 0.35 kg Special features Insert type: SPMG 0602 Compatible insert manufacturers: Taegutec, YG-1 Indexable drill body design FAQ Which inserts fit this drill body? The drill body accepts SPMG 0602 inserts; compatible grades are available from Taegutec and YG-1 for a wide range of materials. What is the cutting diameter and how deep can it cut? The product is specified for an 18 mm cutting diameter with a 72 mm cutting length, suitable for through-holes and common bore depths within that engagement. What shank size is required for clamping? This tool has a 25 mm shank diameter and a clamping length of 56 mm; matching toolholders with a 25 mm bore are required for secure fastening. Which brand and SKU identify this product? This item is supplied by Teknik Makina and sold under SKU U718TM, described as an indexable drill body designed for SPMG 0602 inserts. How does the insert concept benefit workshop efficiency? Using indexable inserts on the drill body reduces downtime for tool changes, makes wear management easier and lowers the number of full-diameter tools kept in stock, improving overall workshop throughput. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable drilling performance for indexable-insert applications: the combination of an 18 mm cutting diameter and a 112 mm overall length delivers stable holemaking and predictable tool life; compatible with XC-- 09T304 inserts and ISCAR systems. Purchase or discuss integration directly via Metav Werkzeuge for tailored advice. Indexable-insert drill body — 18 mm, L112 mm (Teknik Makina) An indexable-insert drill body designed for XC-- 09T304 inserts, offering a precise 18 mm bore solution for CNC machining and production environments 18 mm drilling diameter for consistent holes 112 mm overall length for versatile reach Compatible with XC-- 09T304 indexable inserts Torx T15 screw drive, M3.5x8.5 fastening Consistent bore quality and reduced rework The indexable-insert drill body is engineered to secure repeatable results in series production. With an effective cutting length of 40.5 mm and a nominal diameter of 18 mm, the tool reduces runout-related issues and minimises secondary finishing. Using indexable inserts means that only the inserts need replacing when wear occurs, shortening downtime and lowering per-hole costs. This design supports consistent hole tolerances and improves overall process reliability in batch runs. Fast insert changes and robust clamping for uptime A robust fastening system with Torx T15 actuation and an M3.5x8.5 screw ensures secure clamping of the cutting inserts while enabling fast replacements during shift changes. The toolholder engagement of 56 mm provides stable seating in common toolholders, reducing vibration and improving chip evacuation. At a mass of 0.356 kg, handling and tool changes at the workstation are uncomplicated, supporting efficient tool management and safe operation in the workshop. Compatibility, integration and practical benefits for production Designed for use with XC-- 09T304 indexable inserts and compatible with ISCAR insert systems, this drill body simplifies inventory by matching widely used insert geometries. The combination of standardised insert interfaces and familiar fastening hardware reduces training time for operators and streamlines spare-part logistics. Labelling and SKU tracking (U049TM) support traceability in toolrooms and ERP systems, aiding stock control and reproducible setup procedures. Contact Metav Werkzeuge to discuss how the Teknik Makina indexable-insert drill body (SKU U049TM) can be integrated into current tool inventories—Metav Werkzeuge in Emmerich can advise on holder compatibility and delivery schedules via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: U049TM Label: 18mm drill body for XC-- 09T304 L112mm Manufacturer: Teknik Makina Core specifications Diameter: 18 mm Overall length: 112 mm Cutting length: 40.5 mm Shank insertion length: 56 mm Holder diameter: 25 mm Weight: 0.356 kg ECLASS: 21180201 Materials & features Compatible with XC-- 09T304 indexable inserts Compatible insert manufacturer: ISCAR Torx key: T15 Fastening screw: M3.5x8.5 Product type: Indexable-insert drill body FAQ Which inserts fit this drill body? The drill body accepts XC-- 09T304 indexable inserts; it is designed specifically for that insert geometry. Is the tool compatible with ISCAR inserts? Yes, compatibility with ISCAR inserts is confirmed for this Teknik Makina drill body (SKU U049TM). What is the effective cutting length? The effective cutting length is 40.5 mm, offering sufficient engagement for standard through-hole and shallow blind-hole operations. What key is required to change the inserts? Insert clamping uses a Torx T15 key and an M3.5x8.5 fastening screw for secure, repeatable replacements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a precise, serviceable drilling solution that combines compatibility with Taegutec XC-- 09T304 indexable inserts, an 18 mm cutting diameter, and a compact 97 mm overall length to keep cycle times predictable and tooling costs low. Order the indexable insert drill directly via Metav Werkzeuge or consult our specialists for application advice. Indexable insert drill for XC-- 09T304 (18 mm, L97) by Teknik Makina The indexable insert drill for XC-- 09T304 is a compact drill body designed for reliable, repeatable holemaking in CNC machining and production environments where fast insert changes and predictable performance are essential. 18 mm diameter for standard hole sizes Compatible with Taegutec XC-- 09T304 inserts 97 mm overall length, 40.5 mm cutting length Secured with M3.5x8.5 Torx screw (T15) Precise holemaking with replaceable cutting edges The 18 mm diameter configuration delivers a focused performance envelope for common hole sizes while the compatibility with XC-- 09T304 indexable inserts ensures repeatable results without regrinding. Using an insert system means that the cutting geometry can be restored in seconds, keeping machining tolerances stable and reducing scrap rates. For production runs this translates into reliable cycle times and a predictable maintenance schedule, because worn edges are replaced rather than the whole tool. Reduced downtime through straightforward service and robust fixation With a 40.5 mm cutting length and 97 mm overall length, the tool is balanced for many standard tool holders and short overhangs. The shank length of 56 mm supports secure clamping in common holders, while the Torx fixation (key T15) and M3.5x8.5 screw enable quick, repeatable insert changes with standard hand tools. The modest tool weight (0.356 kg) contributes to low spindle load and stable operation, so servicing is fast and safe without specialised equipment. Flexible integration into CNC cells and job-shop workflows This drill body is designed as an adaptable component: the choice of Taegutec inserts defines the cutting-grade and coating for specific materials or machining strategies. The body suits CNC centres, machining cells and tool rooms that prioritise throughput and easy inventory of cutting edges. Because insert selection is separate from the drill body, shops can standardise on a single holder and vary inserts according to job requirements, improving stock efficiency and setup speed. Lower lifetime costs through replaceable inserts and predictable performance Choosing an indexable system reduces per-hole tooling costs: worn edges are swapped rather than discarded, and the secure Torx screw fixation preserves repeatability across many insert changes. The construction supports routine maintenance with basic workshop tools and minimises the need for specialist reconditioning. Combined with Metav’s logistics and product breadth, this approach helps to keep production reliable and procurement simple. For application-specific recommendations, availability and delivery from Metav Werkzeuge, please contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss how this Teknik Makina indexable insert drill (SKU U23TM) fits existing tool holders and production targets. Technical data Article number: U23TM Label: 18mm Vollbohrer XC-- 09T304 L97mm Manufacturer: Teknik Makina Core specifications Diameter: 18 mm Overall length: 97 mm Cutting length: 40.5 mm Shank length: 56 mm Weight: 0.356 kg Torx key: T15 Torx screw: M3.5x8.5 Special features For XC-- 09T304 indexable inserts Compatible inserts manufacturer: Taegutec Product type: Indexable insert drill SKU: U23TM FAQ Which inserts fit this drill body? The drill body is designed for XC-- 09T304 indexable inserts; select the matching Taegutec insert grade for the intended material to achieve optimal results. What are the key dimensions for setup? Key dimensions include an 18 mm diameter, 40.5 mm cutting length and 97 mm overall length, which are the reference values for toolholder selection and setup. How is the insert fastened and what tool is required? Inserts are secured with an M3.5x8.5 Torx screw; a T15 Torx key is required for insert changes and torque control. Can the drill body be used in automatic tool changers? Yes. With its standard shank length and compact overall length, the body is compatible with many automatic tool changing systems when matched with appropriate holders. Is special balancing required for high-speed machining? Balancing requirements depend on spindle speed and overhang; the tool’s modest weight (0.356 kg) supports stable operation in typical CNC applications, but dynamic balancing may be applied for very high-speed conditions. What is the SKU for reordering and reference? The SKU for this indexable insert drill is U23TM; reference this code when ordering replacement bodies or compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable drill body that combines efficient insert replacement, robust fixing with a Torx drive and a geometry tuned for controlled hole depth; order the drill body directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Drill Body (U065TM) – Ø18 mm, L97 mm by Teknik Makina An indexable drill body for metalworking that accepts XC-- 09T304 indexable inserts and is designed for stable, repeatable holemaking in production environments. Compact Ø18 mm body for reliable drilling performance 56 mm shank for secure clamping and machine compatibility Replaceable inserts for low operating costs and fast service Consistent productivity through replaceable inserts The indexable drill body delivers a production-oriented approach by separating the cutting edge from the body: the use of XC-- 09T304 indexable inserts enables fast tool reconditioning without the need to replace the entire tool. With an Ø18 mm diameter and a 40.5 mm cutting length, the system supports a controlled hole depth while keeping tool change times short. This setup reduces downtime and lowers the effective cost per hole in series work, as worn inserts are exchanged quickly and repeatability is preserved through the proven mounting geometry. Robust fixing and straightforward maintenance A secure clamping concept is provided by the 56 mm shank length combined with a Torx T15 drive for the fastening screw. The specified screw format M3.5x8.5 ensures consistent insert clamping force and straightforward servicing with standard torque tools. At a mass of 0.356 kg, the tool balances rigidity and handling convenience, which helps maintain spindle load stability on typical CNC drilling operations. These mechanical details translate into fewer runouts and a predictable tool life, supporting tight process control on the shop floor. Fit-for-purpose geometry for controlled holemaking With an overall length of 97 mm and a cutting length of 40.5 mm, the tool is optimised for through and mid-depth hole patterns where a compact tool envelope is required. The defined cutting length limits risk of chatter and allows process planners to predict chip evacuation and coolant reach more reliably. Where fixture space is constrained or where short overhang is needed for stiffness, the body’s dimensions offer tangible benefits for cycle-time improvements and hole quality consistency. Practical advantages for purchasing and workshop integration The compatible insert designation and the clear mechanical data simplify procurement and inventory management: bodies are stocked separately from inserts, enabling workshops to keep a small selection of bodies while varying insert grades for different materials and cutting conditions. Supplied as a ready-to-fit body with the Torx fastening arrangement, the design supports quick changeovers and straightforward operator training, while the compact specifications facilitate storage and handling in busy production environments. Contact Metav Werkzeuge today for tailored advice on integrating the Teknik Makina U065TM indexable drill body into production and to arrange supply directly from our Emmerich warehouse Technical Data Article number: U065TM Manufacturer: Teknik Makina ECLASS: 21180201 Facts Diameter: 18 mm Overall length: 97 mm Cutting length: 40.5 mm Shank length: 56 mm Weight: 0.356 kg Special features Compatible with Ceratizit XC-- 09T304 indexable inserts Torx fastening: T15 Fastening screw: M3.5x8.5 Label: 18mm Vollbohrer XC-- 09T304 L97mm Product type: Indexable drill body SKU: U065TM FAQ What inserts are compatible with this drill body? The drill body accepts XC-- 09T304 indexable inserts, which are specified for the Teknik Makina U065TM body to ensure correct fit and geometry. What hole depth can be achieved with this tool? The defined cutting length of 40.5 mm sets the effective hole depth for controlled machining while the 97 mm overall length supports a compact tool setup. Which screw and drive are used for insert clamping? Insert clamping uses a Torx T15 drive with an M3.5x8.5 fastening screw to secure the insert reliably. Is the shank suitable for common collet or chuck systems? The 56 mm shank length provides a secure clamping interface compatible with standard machine tool holders that accept shank-style drill bodies. What is the article number for ordering and inventory? Order or list the item by article number U065TM, the SKU for the Teknik Makina indexable drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product data conflict for SKU U038TM: the item is listed as a solid drill but also specifies indexable inserts (XCMT 09T304), so technical details cannot be determined reliably — please verify the source data to ensure accuracy, as discrepancies like this can lead to confusion in product identification, miscommunication during procurement, or incorrect usage in applications, potentially causing operational inefficiencies or safety risks; resolving this issue promptly by cross-referencing with the original manufacturer’s specifications or consulting technical documentation is essential to maintain data integrity and ensure that the correct product details are communicated to all relevant stakeholders.

Benefit from reliable chip control and compact rigidity thanks to the internal coolant and the tool's 18 mm cutting diameter; this combination improves tool life and process stability. Order the S142-1TM shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter S142-1TM – 18 mm, internal coolant, for APKT 1003 indexable inserts (Teknik Makina) Shank milling cutter S142-1TM designed for indexable-insert face and slot milling in general machining applications 18 mm cutting diameter with 2 cutters Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts 16 mm shank for secure toolholder clamping Torx T8 screw system for fast insert changes Faster stable machining with coolant-fed chip control The coolant-fed design with an integrated internal coolant channel promotes consistent chip evacuation and reduces heat at the cutting zone, leading to more stable cutting conditions and fewer built-up edges. With an 18 mm cutting diameter and 2 cutting edges, the tool balances material removal rate and surface finish for many common milling tasks. This configuration helps to maintain process reliability on short-cycle production runs and improves insert life by flushing chips away from the cutting zone. Secure clamping and rigidity for repeatable results A 16 mm shank provides high torsional stability in clamping systems, reducing vibration and enhancing dimensional repeatability. The modest overall length of 100 mm, combined with a 30 mm effective cutting length, keeps the tool’s overhang low so that the machining centre or milling head can exploit stiffer setups. As a result, the cutter delivers consistent edge life and quieter running, which supports higher first-pass yields in batch production. Flexible insert system for economical operation Designed for use with APKT 1003 indexable inserts (compatible with Korloy), the cutter allows fast, cost-effective insert changes and tool reconditioning without replacing the body. The Torx T8 screw and M2.5x5.5 screw specification ensure quick, secure fastening of inserts, reducing downtime during tool changes. Choosing standard inserts keeps tooling costs predictable and simplifies inventory management across multiple machine tools. Practical maintenance and application guidance The cutter is engineered for straightforward handling: the insert system and Torx screw arrangement enable quick servicing on the workshop floor, while the internal coolant port requires only standard coolant connections. For applications where material mix or machining parameters vary, this compact cutter is suitable for steel and aluminium operations when used with the correct insert grade. Metav Werkzeuge’s product range and advisory services can help match insert geometry and grade to specific applications for optimal performance. Discuss Teknik Makina's S142-1TM with Metav Werkzeuge in Emmerich — contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for application advice and supply options Technical data SKU: S142-1TM Label: 18mm Schaftfräser APKT 1003 L100mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21180806 Facts Cutting diameter: 18 mm Overall length: 100 mm Shank diameter: 16 mm Cutting length: 30 mm Weight: 0.162 kg Number of cutting edges: 2 Special features Internal coolant For APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ Which insert type fits this cutter? The cutter is designed for APKT 1003 indexable inserts; Korloy-compatible grades are commonly used for reliable performance. Is the tool cooled internally? Yes, the S142-1TM features internal coolant to improve chip evacuation and reduce thermal load at the cutting edge. What shank size is required in the toolholder? A 16 mm shank is specified; ensure the toolholder matches this diameter for proper clamping and rigidity. How many cutting edges does the cutter have? The tool is supplied with 2 cutting edges, providing a balance between material removal and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com