Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a precisely engineered shank milling cutter that pairs secure clamping with proven insert compatibility to keep machining cycles consistent and setup times short; order directly via Metav Werkzeuge or consult the team for application-specific advice. Shank milling cutter S826TM – for SPMG 0502-0904 indexable inserts, Ø 20.5 mm, shank Ø 20 mm (Teknik Makina) Shank milling cutter S826TM designed for light to medium milling applications using SPMG indexable inserts, offering a compact tool body and dependable insert retention for repeatable results For SPMG 0502-0904 indexable inserts Effective diameter Ø 20.5 mm Shank Ø 20 mm for secure clamping 50 mm cutting length Consistent machining through rigid design and repeatable geometry The cutter body is engineered to deliver stable cutting performance across prolonged production runs. With an effective diameter of Ø 20.5 mm and a shank Ø 20 mm, the tool provides a balanced combination of rigidity and accessibility for confined setups. The compact overall length of 120 mm reduces overhang and vibration, which in turn improves surface finish and tool life. This design suits small-batch production and jobbing environments where reproducible results and short changeover times are required. Fast changeover and clear insert compatibility save setup time Compatibility with SPMG 0502-0904 indexable inserts simplifies stocking and reuse of established insert grades. The tool accepts inserts in the SPMG family, including variants marketed by Taegutec, which allows the use of commonly available grades for steel and alloy machining. Fastening is standardised with a Torx screw M2.5×7 and a T8 key, enabling quick insert replacement and minimised downtime. The result is a tool that supports efficient workflows and predictable maintenance intervals. Purpose-built for predictable chip control and productivity Configured with 2 cutting edges, the cutter offers a straightforward cutting geometry that promotes stable chip evacuation and lowers cutting forces in interrupted cuts. The defined 50 mm cutting length provides sufficient engagement for many profiling and slotting tasks while limiting unsupported cutter length. This focus on predictable machining behaviour helps maintain consistent cycle times and reduces the risk of unexpected scrap. Practical features for workshop integration The tool’s modest mass of 0.29 kg keeps handling and toolchanger loading simple, while the shank dimensions comply with conventional collet and chuck systems used in small to medium CNC machines. The standardised fastening hardware supports easy procurement and routine maintenance. Where tool selection must align with existing insert inventories, this cutter body offers a seamless option to extend capability without introducing non-standard consumables. Contact Metav Werkzeuge for technical guidance or to request the Teknik Makina S826TM for immediate integration into existing tooling stacks — Tel: +49 2822 7131930 • eMail: info@metav-werkzeuge.com Technical Data SKU: S826TM Manufacturer: Teknik Makina Compatible inserts: SPMG 0502-0904 Indexable Inserts Suitable insert series: SPMG 07T3 Fastening: Torx screw M2.5×7 / Torx key T8 Data Diameter: 20.5 mm Shank diameter: 20 mm Cutting length: 50 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.29 kg Special features For SPMG 0502-0904 indexable inserts Compatible with Taegutec SPMG 07T3 inserts Standard Torx fixing for quick insert changes FAQ What materials is the cutter suitable for? The Shank milling cutter S826TM (Teknik Makina, SKU S826TM) is intended for general light to medium milling tasks; selection of the appropriate SPMG insert grade determines suitability for steel, alloy or other specific materials. Which insert sizes fit this tool? This cutter accepts SPMG 0502-0904 indexable inserts and is compatible with common SPMG 07T3 variants from manufacturers such as Taegutec. How is the insert secured and what tools are needed? Inserts are secured with a Torx screw M2.5×7; a T8 Torx key is required for insert changes and fastening operations. Is the cutter suitable for high-speed machining? The tool body is compact and designed for stable operation; compatibility with high-speed applications depends on the chosen insert grade and machine spindle parameters rather than the cutter body alone. Can the cutter be used in automatic toolchangers? The shank Ø 20 mm and overall mass of 0.29 kg make the cutter suitable for systems that accept shanks of this size and mass; check clamping specifications of the toolholder or changer. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product data inconsistency: the item is labelled as "Vollbohrer" (solid drill) while the data also specifies an indexable insert type "SPMG 0602" and compatibility with insert manufacturers Taegutec and YG-1, which raises concerns about the accuracy of the provided information. It is essential to cross-check these details to ensure that the product description aligns with its technical specifications, as any discrepancies could lead to confusion or incorrect usage. Please verify the product type, technical data, and compatibility for SKU U820-1TM thoroughly before proceeding with any further actions to avoid potential issues or misunderstandings.

Benefit from the combination of precise geometry, coolant-fed reliability and secure toolholding to achieve consistent, repeatable T-slot milling. The 20.5 mm diameter, integrated internal coolant and robust 16 mm shank support efficient chip control and prolonged insert life — order the cutter directly via Metav Werkzeuge or consult their specialists for technical advice. T-slot cutter TKC164TM for TCMT 0902 indexable inserts — 20.5 mm diameter, internal coolant (Teknik Makina) A T-slot cutter TKC164TM engineered for accurate T-slot machining using TCMT 0902 indexable inserts, designed to suit industrial CNC setups and workshop milling applications. 20.5 mm diameter for precise T-slots Internal coolant for consistent chip evacuation 16 mm shank for secure toolholding Compatible with TCMT 0902 indexable inserts Consistent cutting geometry for accurate slot profiles The cutter's geometry is focused on reproducible results: a 20.5 mm diameter combined with a 55° cutting angle and 2 cutting edges gives a predictable chip flow and balanced forces during engagement. This configuration reduces vibration and supports accurate slot width over long production runs. For operators less familiar with insert terminology, TCMT 0902 refers to the standard indexable insert format that defines the insert size and seating, making regrinding and replacement straightforward and reducing downtime. Coolant-fed design and secure mechanical retention An internal coolant channel directs cutting fluid precisely to the cutting zone, improving coolant penetration and aiding chip evacuation, which extends insert life and stabilises tool performance under continuous operation. Mechanical stability is assured by the 16 mm shank and a compact tool body with a 150 mm overall length and 40 mm cutting length, delivering a balance between rigidity and accessibility in deeper T-slot operations. The tool’s measured mass of 0.212 kg contributes to controlled spindle dynamics while remaining easy to handle during set-up. Workshop integration, maintenance and fastening details The cutter integrates with standard toolholding systems thanks to its shank diameter and retention design. Inserts are fastened using a Torx screw (size M2.2x5) tightened with a T7 key, providing reliable clamping without the need for special fixtures. The design simplifies maintenance routines: spare inserts in the TCMT 0902 format are widely available, and the compact retention hardware reduces changeover time. For CNC shops prioritising repeatability, the component selection supports quick, consistent setups and minimised process variation. Operational advantages and supplier reliability Selecting this milling tool brings operational benefits: predictable slot dimensions, improved insert life because of coolant delivery, and simplified logistics through a common insert format. Procurement via a trusted distributor further reduces supply-chain risk — Metav Werkzeuge’s Emmerich hub acts as a quality filter for the European market, supporting a stable supply and broad product range trusted by thousands of industrial customers. This combination is particularly suitable for manufacturers seeking dependable, production-ready tooling. Contact Metav Werkzeuge for procurement and technical guidance on the Teknik Makina TKC164TM with internal coolant, and request detailed compatibility information for specific machine interfaces. Technical data SKU: TKC164TM Label: 20.5 mm T-slot cutter for TCMT 0902, L150 mm, internal coolant Manufacturer: Teknik Cutting Tools Facts Diameter: 20.5 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 40 mm Number of cutting edges: 2 Cutting angle: 55° Weight: 0.212 kg Special features Internal coolant Compatible with TCMT 0902 indexable inserts Torx screw M2.2x5 for insert clamping Torx key size T7 FAQ Which insert type does this cutter use? The cutter accepts TCMT 0902 indexable inserts; this standard insert format allows quick replacement and broad material applicability when paired with the correct insert grade. Is the tool suitable for coolant-fed machining? Yes — the tool features internal coolant, which delivers fluid directly to the cutting zone and improves chip evacuation and insert life under continuous cutting. What shank size and holder interface are required? A 16 mm shank is specified; the cutter requires a compatible toolholder that accepts a 16 mm shank for secure clamping and correct concentricity. How are the inserts secured? Inserts are fastened with a Torx screw M2.2x5, tightened using a T7 key to ensure firm clamping and repeatable seat location. What is the product identifier for ordering or spare parts? The product is listed under SKU TKC164TM for ordering and spare-part references. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Built for secure, coolant-fed boring with indexable CNMG inserts, the AP347TM offers a combination of internal coolant and a rigid 20 mm shank to support stable chip control and consistent results. Order the AP347TM directly via Metav Werkzeuge or consult their specialists for machining recommendations. AP347TM Boring Bar PCLN for CNMG Indexable Inserts — 20 mm shank, internal coolant (left-hand) The AP347TM is a left-hand boring bar in PCLN format with internal coolant, engineered for use with CNMG 09T3 indexable inserts in turning and boring operations Internal coolant for secure chip evacuation 20 mm shank for stable clamping Compatible with CNMG 09T3 inserts Left-hand cutting direction for specialised set-ups Improved rigidity for accurate bore finishing The tool body is designed to provide mechanical stability during interrupted cuts and long overhangs. With a 20 mm shank and an effective diameter of 26 mm, the bar maintains positional integrity while the nominal 95° cutting angle supports predictable chip flow and contact geometry. This combination reduces chatter risk and aids repeatable bore quality, which is essential in production runs and precision workshop tasks where consistent hole tolerance matters. Active coolant supply to protect inserts and workpieces Equipped with internal coolant, the bar routes cutting fluid directly to the cutting edge to improve cooling and chip evacuation. Direct coolant delivery helps to prolong insert life by lowering edge temperature and flushing chips away from the cutting zone, which in turn reduces rework and tool changes. The design includes the specified clamping components — plate TA023, dowel TS3 and lever TL3 — and can be secured using a 2.5 mm Allen key for rapid, reliable set-ups. Quick integration with PCLN toolholders for efficient changeover The ISO designation A20R PCLNL confirms compatibility with standard PCLN toolholders and supports the CNMG 09T3 insert format. The bar’s total length of 200 mm and moderate weight of 0.44 kg make it straightforward to handle and mount while keeping spindle load modest. The left-hand cutting orientation suits specific lathe configurations and process layouts, enabling flexible integration into existing turning cells. For workshops seeking a balance of stability, cooling and compatibility, the AP347TM is positioned as a practical, production-ready option. For coolant-fed left-hand boring tasks, contact Metav Werkzeuge to discuss the AP347TM’s application specifics or to request ordering assistance via phone or email Technical data Article number: AP347TM Manufacturer: Teknik Makina Type: PCLN for CNMG Indexable Inserts ISO designation: A20R PCLNL Data Shaft diameter: 20 mm Overall length: 200 mm Diameter: 26 mm Cutting height: 40 mm Cutting angle: 95° Weight: 0.44 kg Allen key: 2.5 mm Special features Internal coolant Left-hand cutting direction For CNMG 09T3 indexable inserts Clamping plate: TA023 Dowel pin: TS3 Lever: TL3 Holder size indication: 09 FAQ Which insert type fits this boring bar? The AP347TM is designed for CNMG 09T3 indexable inserts and matches the PCLN toolholder geometry. Does the bar provide internal coolant delivery? Yes — the AP347TM is equipped with internal coolant to aim coolant flow directly to the cutting edge. What is the shank diameter and how does it affect clamping? The tool has a 20 mm shank, providing a secure clamping interface and improved rigidity in standard PCLN holders. Is the cutting direction left-hand or right-hand? This version is specified for left-hand cutting applications and is intended for lathe set-ups requiring that orientation. What ISO designation applies to the tool? The bar carries the A20R PCLNL ISO designation, facilitating compatibility checks with PCLN toolholders and fixtures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a left‑hand cutting direction, compatibility with DNMG 1104 indexable inserts and a 200 mm overall length, this drilling bar provides reliable reach and repeatable insert positioning for demanding turning and boring operations. Order the tool directly via Metav Werkzeuge or request tailored advice from our consultants. Drilling Bar AP309TM — for DNMG 1104 indexable inserts, 200 mm, left‑hand — Teknik Makina The Drilling Bar AP309TM is a left‑hand tool holder engineered to accept DNMG 1104 indexable inserts, offering secure clamping and stable performance for internal and external boring tasks in production environments Compatible with DNMG 1104 indexable inserts 200 mm overall length for deeper reach Left‑hand cutting direction for reverse turning Clamping with 2 Allen keys, 18 mm head height Enhanced productivity through proven compatibility and reach The AP309TM drilling bar is built around compatibility with DNMG 1104 indexable inserts, which allows rapid insert changes and straightforward integration into existing tooling systems. With an overall length of 200 mm, the tool provides extended reach for deeper bores while maintaining rigidity, reducing the need for repeated re‑clamping. The left‑hand cutting orientation supports reverse‑direction machining operations, enabling process flexibility on machines and setups where standard right‑hand holders are unsuitable. This combination of features reduces cycle time and simplifies tool inventory management. Secure clamping for consistent cutting performance A stable clamping interface is central to repeatable machining quality; the holder features a clamping head height of 18 mm and a clamping head width of 13 mm, designed for positive insert seating and minimal movement under load. Clamping is effected with 2 Allen keys, ensuring a compact and serviceable fixation that is quick to adjust during changeovers. The defined cutting height of 40 mm aligns insert geometry precisely, helping to maintain surface finish and dimensional accuracy across batches. The holder’s modest mass (0.5 kg) supports easy handling without compromising stability. Practical fitment and production support for workshops Designed for use as a robust component in production tool racks, the drilling bar integrates with standard indexable insert workflows and is straightforward to set up on CNC lathes and boring heads. A cutting angle of 93° supports predictable chip flow and contact conditions at the insert edge, contributing to longer insert life when paired with correct cutting parameters. The AP309TM is supplied under Teknik Makina’s manufacturing standard and is identified as SKU AP309TM for easy ordering and reordering, ensuring consistent replenishment and traceability in procurement processes. For procurement of Teknik Makina’s AP309TM drilling bar or bespoke advice on left‑hand DNMG 1104 tooling solutions, contact Metav Werkzeuge in Emmerich for fast, reliable supply and expert guidance Technical Data Article number: AP309TM Label: Bohrstange DNMG 1104 L200mm Product type: Drilling bar Manufacturer: Teknik Makina eClass: 21180806 Facts Overall length: 200 mm Weight: 0.5 kg Cutting height: 40 mm Clamping head height: 18 mm Clamping head width: 13 mm Cutting angle: 93° Cutting direction: left Allen keys: 2 Special features Compatible with DNMG 1104 indexable inserts Secure clamping with 2 Allen keys Left‑hand machining orientation SKU / UID: AP309TM FAQ What inserts does this holder accept? The AP309TM drilling bar accepts DNMG 1104 indexable inserts, providing fast insert changes and standardised seating for predictable machining. Is the cutting direction suitable for reverse turning operations? Yes, the holder is designed with a left‑hand cutting direction, making it suitable for reverse turning and specific machining set‑ups. What are the key dimensions relevant for set‑up? Key dimensions for set‑up include an overall length of 200 mm, a clamping head height of 18 mm and a cutting height of 40 mm, which help ensure correct insert alignment. How is the insert secured in the holder? Insert clamping is performed using 2 Allen keys for a compact, serviceable fixation that supports repeatable and secure seating of DNMG 1104 inserts. Which SKU should be ordered for this drilling bar? Order using SKU AP309TM to ensure the correct Teknik Makina drilling bar is supplied. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a rigid 16 mm shaft, a long 152 mm cutting length and compatibility with CCMT 0602 indexable inserts, this boring bar delivers stable internal machining and efficient insert changes; order the TKB098TM directly via Metav Werkzeuge or consult our specialists for application advice. TKB098TM Boring Bar – indexable internal boring tool with 16 mm shaft and 152 mm cutting length (Teknik Makina) The TKB098TM Boring Bar offers a compact, precision-focused solution for internal turning operations, designed as an indexable tool holder compatible with CCMT 0602 inserts for straightforward insert replacement and repeatable results 16 mm shaft for secure clamping 152 mm effective cutting length for deep bores Compatible with CCMT 0602 indexable inserts 200 mm overall length for extended reach Delivering consistent bore accuracy and vibration control The combination of a 16 mm shaft and an extended 152 mm cutting length provides a balance between reach and rigidity that helps maintain concentricity during internal machining. Where stability is essential, the toolholder’s design reduces chatter and supports repeatable diameters across batch runs. Specified tolerances are achieved more reliably when the holder is clamped correctly in a standard toolpost or boring bar adaptor, making the unit suitable for precision-focused turning tasks. The use of indexable inserts reduces setup variability compared with brazed or solid tooling, translating directly into predictable part quality. Faster insert changes and predictable uptime for production Designed for CCMT 0602 indexable inserts, the boring bar reduces maintenance downtime through quick insert indexing and simple replacement without specialised fixtures. The low mass of 0.401 kg contributes to easier handling during tool changes and reduces spindle overhang effects when re‑mounting, while the insert system supports both finishing and light roughing passes depending on the chosen grade. This pragmatic approach to tooling lowers process interruptions and helps sustain machine uptime during medium-length production cycles. Integrates into CNC turning workflows with extended reach With a 200 mm overall length, the tool provides the reach required for many internal machining applications while remaining compatible with common CNC turret and toolpost arrangements. As an indexable boring bar, it fits established workshop processes, allowing straightforward inventory management by pairing the holder with widely available CCMT plates. The design supports operators and planners aiming to harmonise tooling across multiple machines, enabling a consistent approach to tooling procurement and faster tool set-up times on the shop floor. The robust construction supports steady cutting conditions and consistent part outcomes. Discuss machining requirements and procure the Teknik Makina TKB098TM via Metav Werkzeuge for reliable supply from Emmerich; for specification checks or a tailored quote contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TKB098TM Manufacturer: Teknik Makina Description: Boring tool / indexable boring bar Compatible inserts: CCMT 0602 Numbers / Core technical data Shaft diameter: 16 mm Cutting length (cutting part): 152 mm Overall length: 200 mm Weight: 0.401 kg ECLASS: 21181208 Special features For indexable inserts CCMT 0602 Intended for internal boring operations Solid construction for stable machining Compact design for straightforward handling FAQ What insert type does the tool accept? The TKB098TM accepts CCMT 0602 indexable inserts; this standard format allows easy sourcing and fast replacement during production. Which machines is the boring bar suited to? The indexable boring bar is suitable for conventional and CNC turning centres equipped with compatible toolholders; the 200 mm overall length offers extended reach for internal operations. How does the shaft diameter affect performance? The 16 mm shaft provides secure clamping and contributes to reduced vibration, supporting consistent bore accuracy when mounted correctly. Is the tool intended for heavy roughing or finishing? Paired with the appropriate CCMT insert grade, the holder supports finishing and light to moderate roughing; insert selection should match the intended cut and workpiece parameters. How heavy is the tool for handling and set-up? The tool weight is 0.401 kg, which facilitates handling during set-up and reduces tool overhang impact when mounted. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a stable 200 mm diameter toolhead with a 90° cutting angle and compatibility with TPKN 1603–2204 indexable inserts for predictable chip control and surface finish; the robust 60 mm arbor and M8x24 fastening provide secure mounting and reduced downtime. Order the corner milling head directly via Metav Werkzeuge or ask our consultants if needed. Corner milling head (T136TM) — for TPKN 1603–2204 indexable inserts, Ø200 mm, 90° cutting angle (Teknik Makina) Corner milling head (T136TM) for precision corner and face milling with indexable inserts, engineered for stable engagement in medium to heavy milling applications 200 mm diameter for heavy-duty cutting Accepts TPKN 1603–2204 indexable inserts 90° cutting angle for precise corner machining 60 mm arbor for secure toolholder connection Stable machining with a 90° cutting geometry The head is designed to deliver consistent results thanks to its 90° cutting angle and large Ø200 mm diameter, which together increase contact stability and reduce chatter during engagement. With eight cutting edges, the assembly balances chip removal and load distribution, yielding improved surface finish and longer insert life. The mass of the head contributes to vibration damping while the robust construction supports repeatable machining tolerances in serial production. Broad compatibility streamlines tool inventories Compatibility with TPKN 1603–2204 indexable inserts simplifies tool management by allowing standardised insert types across multiple toolholders. Indexable inserts provide a cost-effective way to restore cutting performance: worn edges are replaced instantly without regrinding, which shortens setup time and maintains machining quality. The modular approach reduces stock complexity and supports quick changeovers on multi-shift shop floors. Secure clamping and maintenance-friendly assembly A 60 mm arbor interface and M8x24 fastening screw ensure a rigid connection to the machine spindle or adapter, while the supplied 5 mm Allen key specification makes routine maintenance straightforward. The compact overall length and the head’s weight of 5.458 kg aid in stable cutting dynamics without excessive overhang. These characteristics combine to offer a dependable toolholder that minimises unplanned stoppages and supports efficient workshop throughput. Contact Metav Werkzeuge today for procurement and technical advice on the Teknik Makina T136TM corner milling head; call +49 2822 7131930 or email info@metav-werkzeuge.com for delivery from Emmerich and customised recommendations. Technical data Article number: T136TM Manufacturer: Teknik Makina Designation: Eckmesserkopf For indexable inserts: TPKN 1603–2204 Facts Diameter: 200 mm Arbor diameter: 60 mm Cutting angle: 90° Number of cutting edges: 8 Overall length: 62 mm Weight: 5.458 kg e dimension: 101.6 mm Screw: M8x24 Allen key: 5 mm Special features Accepts TPKN 2204 indexable inserts Suited for TPKN 1603–2204 inserts Robust construction for milling operations FAQ Is the head compatible with other insert sizes? The corner milling head accepts TPKN 1603–2204 indexable inserts as specified; alternative insert sizes are not listed for this model. What arbor diameter is required for mounting? Mounting requires a 60 mm arbor connection; use the corresponding adaptor or spindle seat for secure installation. How many cutting edges does the toolhead provide? The toolhead is supplied with eight cutting edges, optimised to balance material removal and tool life. Which fastening hardware is used for insert clamping? The assembly uses M8x24 fastening screws and specifies a 5 mm Allen key for tightening and maintenance. What are the key benefits in a production environment? The combination of Ø200 mm diameter, 90° geometry and compatibility with standard TPKN inserts provides stable machining, predictable insert life and faster servicing between shifts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a robust 200 mm diameter, compatibility with WNMU 0806 indexable inserts and a compact 63 mm overall length to improve stability and throughput on the lathe; order the tool head directly via Metav Werkzeuge or consult our experts for application-specific advice. Corner tool head – 200 mm diameter, for WNMU 0806 indexable inserts (Teknik Makina) Corner tool head for heavy-duty turning applications, designed to accept WNMU 0806 indexable inserts and deliver stable corner machining in industrial CNC environments. *200 mm diameter for rigidity and stability *Compatible with WNMU 0806 indexable inserts (Kyocera) *Overall length 63 mm for compact set-ups *14 cutting edges for extended productivity *90° cutting angle for precise corner machining Greater productivity through stable geometry and multiple cutting edges The large 200 mm diameter body increases moment of inertia, reducing vibration during corner cuts and improving surface finish consistency. With 14 cutting edges distributed for indexing, the head minimises downtime for insert changes and raises effective output per tool set. The 90° cutting angle supports accurate shoulder and corner operations, translating tool geometry into repeatable part quality. These measurable advantages make the component a reliable choice where cycle time and finish are critical. Proven compatibility and straightforward tool management Designed for use with WNMU 0806 indexable inserts, the head accepts inserts from Kyocera, simplifying sourcing and inventory management for production shops. The compact 63 mm overall length allows integration into tighter turret setups without sacrificing rigidity. Fast replacement is facilitated by standard fastenings, so ordering inserts and spares follows established procurement channels; this contributes directly to lower process complexity and predictable uptime for machine shops. Installation, serviceability and operational safety Assembly and maintenance are intentionally simple: fixing is performed with Torx screws and requires a T20 key for secure clamping, using M5x12 screws supplied with the unit. The substantial mass of 8.302 kg contributes to a stable centre of gravity during machining, while standardised screw sizes and insert formats reduce the need for special tooling inventories. Routine checks focus on clamping torque and insert condition; following these short procedures ensures sustained cutting performance and long tool life. For procurement guidance or to specify the Teknik Makina corner tool head for your machine, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply arrangements Technical Data Article number: T549TM Manufacturer: Teknik Makina Label: 200mm Eckmesserkopf WNMU 0806 L63mm Product type: Corner tool head Facts Diameter: 200 mm Overall length: 63 mm Weight: 8.302 kg Cutting edges: 14 Cutting angle: 90° Screw size: M5x12 Special features Compatible with WNMU 0806 indexable inserts Insert manufacturer compatibility: Kyocera Torx key required: T20 SKU: T549TM ECLASS: 21181015 FAQ Which insert type does this tool head accept? The corner tool head accepts WNMU 0806 indexable inserts; compatibility with Kyocera inserts is specified for consistent performance. What are the key dimensions to check for turret fitment? Check the 200 mm diameter and 63 mm overall length to ensure compatibility with the machine turret and adjacent tooling. How many indexing positions or cutting edges are available? The tool head provides 14 cutting edges, allowing extended runtime between insert replacements and higher production continuity. What fastening hardware does the unit use? Assembly uses M5x12 Torx screws tightened with a T20 key for secure clamping and straightforward service procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution that combines precise clamping, clear compatibility with TPKN inserts and a compact 60 mm shank for reliable turning operations. Benefit from a consistent 90° cutting angle and a durable TA012 clamping plate for repeatable machining results — order directly via Metav Werkzeuge or contact the consultants for application advice. Corner turning head T112TM — indexable insert holder with 90° cutting angle, Teknik Cutting Tools The Corner turning head T112TM offers a compact, toolholder-style solution for edge and shoulder turning with indexable inserts designed for industrial CNC applications Compatible with TPKN 1603–2204 inserts 60 mm shank diameter for secure mounting 90° cutting angle for accurate shoulder work TA012 clamping plate and M8x24 lock screw Secure clamping that improves process reliability The toolholder is built around a 60 mm shank diameter which provides stable mounting in standard tool turrets and reduces vibration during heavy cuts. The integrated TA012 clamping plate and M8x24 lock screw allow consistent positioning of the insert, so set-up deviations are minimised and cycle-to-cycle repeatability improves. For shops transitioning from conventional holders, the robust clamping leads to fewer repositions and measurable gains in first-pass yield. Clear compatibility and simple assembly Designed for indexable inserts, the head accepts the TPKN 2204 family (and related 1603–2204 sizes), making it straightforward to match insert geometry and grade to the workpiece. Assembly uses a M4x10 hex screw secured with a 5 Allen key, enabling quick replacement of inserts and routine maintenance without specialised tooling. The straightforward interface reduces downtime and simplifies spare-part logistics for production environments. Engineered dimensions for consistent cutting performance With an effective diameter of 200 mm and eight cutting edges, the component distributes cutting forces evenly while maintaining a compact footprint (overall length 62 mm). A defined 90° cutting angle ensures accurate shoulder faces and perpendicularity, reducing the need for secondary finishing. The head’s mass (approximately 5.412 kg) contributes to inertia damping, which supports smoother chip formation and helps extend insert life under steady cutting conditions. Practical benefits for workshop productivity This holder focuses on repeatable set-up and predictable results: fewer adjustments, reduced scrap rates and more stable tool life. The modular compatibility with common TPKN indexable inserts allows shops to leverage existing insert inventories while upgrading holder rigidity. For operations aiming to standardise tooling across a machine fleet, this solution supports consistent process parameters and simplifies operator training. For procurement support or application-specific advice on Teknik Cutting Tools’ corner turning heads, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — for reliable supply and expert guidance Technical data Article number: T112TM Manufacturer: Teknik Makina ECLASS: 21181015 Name (EN): Corner turning head for TPKN 1603–2204 indexable inserts Core data Effective length (e_mm): 101.6 Shank diameter (d): 60 mm Weight: 5.412 kg Diameter: 200 mm Cutting edges: 8 Overall length: 62 mm Cutting angle: 90° Special features Compatible with TPKN 1603–2204 indexable inserts Lock screw: M8x24 Clamping plate: TA012 Hex screw: M4x10 Allen key size: 5 FAQ What inserts fit this toolholder? The corner turning head T112TM is designed for TPKN 1603–2204 indexable inserts; matching the insert grade to the workpiece material ensures optimal tool life. How is the insert secured in the holder? Insert clamping is achieved via the TA012 clamping plate and an M8x24 lock screw, with the M4x10 hex screw used for auxiliary fixation where applicable. Can the holder be mounted in standard turrets? Yes — the 60 mm shank diameter provides a stable interface for compatible turret systems and reduces radial runout during turning. Is this head suitable for heavy shoulder cuts? The combination of the 90° cutting angle, robust clamping and the head’s mass (approx. 5.412 kg) makes it suitable for demanding shoulder and edge-turning operations when paired with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 90° cutting geometry combined with a 60 mm holder diameter and Ø200 mm body to achieve stable shoulder machining and reliable insert changes; order the item directly via Metav Werkzeuge or consult our experts for specification support. Corner tool head T851TM — Corner cutting head, 90° geometry, Ø200 mm (Teknik Makina) Corner tool head T851TM is a precision turning head for shoulder and profiling operations using XNEX 0806 indexable inserts Corner tool head T851TM by Teknik Makina Compatible with XNEX 0806 indexable inserts 90° cutting angle for precise shoulder cuts 60 mm holder diameter with Ø200 mm body Consistent 90° shoulder machining for repeatable components The robust design delivers a 90° cutting geometry that stabilises load direction during shoulder turning, which reduces vibration and produces consistent faces and shoulders. With a solid-body diameter of Ø200 mm and an optimised mass distribution, the assembly maintains cutting stability even under interrupted cuts. This results in improved repeatability part after part and decreases the need for corrective finishing, benefiting production runs that demand tight tolerances. Fast insert changes and broad compatibility to cut downtime Designed for use with XNEX 0806 indexable inserts, the head accepts inserts from established manufacturers such as SECO and WINSTAR, enabling flexible tool sourcing and quick adaptation to existing tooling inventories. Insert fixation uses a Torx M4x12.5 screw with a T15 key, permitting secure clamping with straightforward service routines. The simplified interchange workflow shortens set-up times and contributes directly to higher machine availability and throughput. Stable holder and mass for heavy-duty cutting stability The tool holder features a 60 mm holder diameter that interfaces with standard heavy-duty turrets and toolposts, providing a secure clamping interface and improved resistance to bending moments. Weighing in at 6.415 kg, the unit’s inertia aids in dampening cutting forces and helps to preserve insert life and surface finish. The combination of a solid Ø200 mm body and a compact overall length improves accessibility at the machining zone while preserving the rigidity needed for medium to heavy cuts in a variety of workshop and production environments. For tailored advice on the Teknik Makina corner tool head T851TM, and to secure reliable supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T851TM Product: Corner tool head (Eckmesserkopf) Manufacturer: Teknik Makina Application: for XNEX 0806 indexable inserts Compatible insert manufacturers: SECO, WINSTAR Torx screw: M4x12.5 Torx key: T15 Facts Weight: 6.415 kg Body diameter: 200 mm Holder diameter: 60 mm Overall length: 63 mm Cutting edges: 14 Cutting angle: 90° Special features Compatible with XNEX 0806 indexable inserts Suitable for inserts from SECO and WINSTAR Designed for shoulder and profiling operations Brand: Teknik Makina FAQ Which inserts fit this tool head? The corner tool head accepts XNEX 0806 indexable inserts; compatible suppliers listed for the head include SECO and WINSTAR. What is the cutting angle and why does it matter? A 90° cutting angle is specified to deliver square shoulder cuts and stable force distribution, improving surface finish and repeatability in shoulder machining. How is the insert secured in the head? Inserts are clamped using a Torx M4x12.5 screw; the corresponding Torx key size is T15, ensuring a secure and serviceable fixation. What holder size does this head require? The head uses a 60 mm holder diameter, suitable for heavy-duty turrets and toolposts that provide enhanced rigidity. Is this product suitable for production shops or jobbing work? The construction and mass of the head, combined with its compatibility with established insert systems, make it appropriate for both production runs and robust jobbing work where stability and quick insert changes are valued. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the large 200 mm diameter and the compatibility with SCMT 1204 indexable inserts to increase material removal rates while keeping tooling costs predictable; the robust 40 mm arbor and secure M5x12 fastening deliver stability for continuous production. Order the DF120TM directly via Metav Werkzeuge or ask our consultants if needed. DF120TM disc milling cutter by Teknik Makina — 200 mm diameter, 14 cutting edges The DF120TM is a high-capacity disc milling cutter designed for face milling and heavy-duty material removal in production environments, using indexable SCMT 1204 inserts for fast servicing 200 mm cutting diameter for broad material removal Fits SCMT 1204 indexable inserts 14 cutting edges for stable, continuous cuts Arbor 40 mm and M5x12 Torx fastening Faster cycle times through optimised cutter geometry The large 200 mm tool diameter and the arrangement of 14 cutting edges enable higher feed per tooth and wider engagement, which reduces the number of passes needed for face milling operations. By fitting standard SCMT 1204 indexable inserts the tool converts material removal capacity into predictable costs: worn edges are replaced rather than the whole tool, reducing capital tied up in tooling and shortening downtime. This combination of geometry and insert standardisation supports measurable productivity gains on milling centres and heavy-duty machining cells. Stable setup for consistent surface quality A solid 40 mm arbor interface and secure fastening with M5x12 Torx screws (tooled with T20) ensure concentric clamping and low vibration during cuts. The 16 mm nominal cutting height provides adequate engagement for common face milling depths while maintaining chip evacuation. These mechanical details translate into a repeatable process window: improved part-to-part consistency, reduced rework and more reliable cycle times — key advantages for batch production and subcontract machining. Low-maintenance operation and quick serviceability The use of widely available inserts and standard Torx hardware simplifies maintenance routines. Insert changes are straightforward, spare parts are commonly stocked, and service intervals focus on insert life rather than entire cutter replacement. The cutter’s balanced mass and familiar fastening practice reduce handling time at the tool post: a pragmatic approach that keeps workshops running and maintenance predictable without sacrificing performance. Integration into workshop workflows and machining centres Designed for indexable face milling tasks, the tool integrates easily with standard rigid spindles and toolholders that accept a 40 mm arbor. Its configuration is suitable for both high-throughput production and heavier single-pass operations where consistent material removal is required. Combined with Metav’s supply reliability and broad stock, the cutter supports a lean tooling strategy that reduces supplier complexity and improves lead times for replacement components. Contact Metav Werkzeuge for tailored tooling advice or to arrange supply of the DF120TM, including details on compatible inserts and delivery from Emmerich. Technical data Article number: DF120TM Manufacturer: Teknik Cutting Tools Tool type: Disc milling cutter Brand: Teknik Makina Facts Diameter: 200 mm Number of cutting edges: 14 Cutting height: 16 mm Arbor / shank: 40 mm Axial depth (ap): 65 mm Fastening screw: M5x12 Torx key size: T20 Weight: 2.769 kg Special features Compatible inserts: SCMT 1204 Indexable insert system Designed for face milling and broad material removal FAQ What inserts does the cutter accept? The cutter accepts SCMT 1204 indexable inserts, which are widely available and simple to change on the DF120TM. Which arbor size is required for mounting? A 40 mm arbor interface is required for correct mounting and concentric stability. How many cutting edges are fitted to the tool? The tool is configured with 14 cutting edges to balance material removal and surface finish. What fastening hardware is used for the inserts? Insert clamping uses M5x12 Torx screws; a T20 key is the recommended driver. Is the cutter suitable for high-production environments? Yes; the combination of large diameter, multiple cutting edges and indexable inserts makes the cutter suitable for continuous production where predictable tool change intervals are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high material removal capacity and secure mounting for predictable milling cycles; the use of indexable CCMT 0602 inserts keeps operating costs manageable while reducing downtime. Order the cutter directly via Metav Werkzeuge or consult the technical team for specification matching. Disc cutter DF196TM — indexable disc cutter, Ø 200 mm (Teknik Makina) The Disc cutter DF196TM is an indexable milling tool engineered for high-efficiency face and peripheral milling on CNC machines, tailored for use with standard CCMT 0602 inserts. Ø 200 mm cutting diameter Compatible with CCMT 0602 inserts 18 cutting edges for stable removal 40 mm bore for secure mounting Higher removal rates with consistent stability The DF196TM is designed to combine a large cutting diameter with multiple cutting edges to maintain a steady chip load and reduced vibration during heavy passes. Thanks to the Ø 200 mm diameter and 18 cutting edges, the cutter distributes cutting forces across more teeth, which lowers peak loads on individual inserts and extends tool life. This configuration permits reliable material removal in interrupted and continuous milling operations, making the tool suitable for job shops and production lines where long tool life and consistent surface quality are required. The construction supports predictable results even under higher axial engagement. Secure mounting and fast insert changes for uptime A precision 40 mm bore provides a concentric, robust interface for face holders and arbors, improving runout and repeatability. The cutter accepts CCMT 0602 indexable inserts, which are widely available and simple to replace; M2.5x7 Torx screws secure the inserts, with a T08 key used for rapid, repeatable clamping. The cutting height 10 mm and an axial capacity of 70 mm allow substantial depth engagements per pass when the machining strategy requires it, while the insert geometry keeps heat and chip formation under control. These features reduce downtime for maintenance and make consumable management straightforward. Predictable performance and economical operation Weighing 2.035 kg, the cutter balances rigidity and handling convenience for tool setup and changeover procedures. Use of standard CCMT 0602 carbide inserts lowers stocking complexity and supports cost-effective re-indexing when edges are renewed. The indexable design converts tooling investment into multiple cutting edges per insert, improving cost per cutting edge compared with solid-carbide alternatives. For operations focused on process reliability, the tool’s combination of geometry and standardised fastening components yields measurable efficiency gains over time, while supporting consistent surface finish and dimensional control. For robust, high-throughput milling choose the Teknik Makina DF196TM and contact Metav Werkzeuge for tailored supply and application advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: DF196TM Manufacturer: Teknik Makina Designation: Disc cutter Facts Diameter: 200 mm Cutting edges: 18 Axial depth (ap): 70 mm Cutting height: 10 mm Bore / shank diameter: 40 mm Weight: 2.035 kg Special features Compatible inserts: CCMT 0602 Torx screw: M2.5x7 Torx key: T08 Indexable insert system FAQ What insert type is required for this cutter? The DF196TM uses CCMT 0602 indexable inserts; this insert type is widely available and offers four usable cutting edges per plate. What arbor or holder fits the cutter? A holder or arbor with a 40 mm bore is required to mount the disc cutter securely for concentric operation. What is the maximum axial engagement for the tool? The cutter is specified with an axial depth (ap) of 70 mm, allowing substantial depth per pass depending on machine capability and process parameters. How many cutting edges does the cutter provide? The tool body accepts 18 cutting edges, which improves chip distribution and reduces load per edge for steadier cutting. Is the fastening hardware standardised? Yes; inserts are retained by M2.5x7 Torx screws and can be tightened using a T08 Torx key for consistent clamping torque. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise indexable-insert milling with a robust 200 mm disc cutter featuring 16 cutting edges and compatibility with CCMT 09T3 inserts for efficient stock removal and consistent surface finish; combine the 40 mm shank and a 14 mm cutting height for stable clamping and long tool life — order directly via Metav Werkzeuge or consult their specialists. DF200TM — Teknik Makina disc milling cutter, 200 mm diameter, CCMT 09T3 compatible The DF200TM is a disc milling cutter engineered for indexable-insert milling with a 200 mm cutting diameter and a 40 mm shank for secure CNC toolholding 200 mm cutting diameter Fits CCMT 09T3 inserts 16 cutting edges for high removal 40 mm shank for stable clamping Increase throughput with predictable material removal The combination of a 200 mm diameter and 16 cutting edges enables steady material removal and longer uninterrupted cuts. A recommended axial engagement of 70 mm supports deeper passes where the process allows, reducing the number of tool changes per workpiece and shortening cycle times. By using indexable inserts such as CCMT 09T3, the system separates the cutting geometry from the tool body; worn inserts are replaced quickly, while the cutter body stays in service. This approach lowers per-part costs and provides a measurable improvement in machining productivity for batch production or continuous runs. Secure clamping and fast insert handling for reliable shifts Built with a 40 mm arbor for solid mounting, the toolhead maintains stiffness under load and supports accurate radial run-out. The insert pocket depth and a 14 mm cutting height give a clearly defined cutting zone, which helps to achieve a consistent surface finish. Insert retention is ensured by M3.5x9 Torx screws tightened with a T15 key, enabling repeatable clamp torque and straightforward replacement during maintenance breaks. With a net weight of 2.575 kg, the assembly balances rigidity and manageable handling when fitting to milling spindles or tool changers. Practical integration for workshop and CNC environments Designed as an indexable disc cutter for insert-based milling, the cutter accepts standard CCMT 09T3 inserts, so tooling choices and regrind cycles used in many shops remain applicable. For operators unfamiliar with the designation: CCMT 09T3 denotes an insert geometry and size suited to mixed-turning and profile milling tasks; it is widely available from major insert manufacturers. The modular concept reduces downtime and simplifies inventory management — one body can be stocked for multiple jobs while inserts are consumed as expendable parts. For bespoke applications or to check compatibility with existing toolholders, Metav Werkzeuge provides technical advice and ensures swift supply from its Emmerich location. For tailored advice on integrating the Teknik Makina DF200TM into production or to arrange supply via Metav Werkzeuge from Emmerich, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: DF200TM Manufacturer: Teknik Makina Product: Disc milling cutter Facts Diameter: 200 mm Cutting edges: 16 Cutting height: 14 mm Recommended axial engagement: 70 mm Shank diameter: 40 mm Weight: 2.575 kg ECLASS: 21180704 ETIM: EC011860 Special features Insert type: CCMT 09T3 Torx screw: M3.5x9 Torx key: T15 Suitable for indexable-insert milling SKU: DF200TM FAQ What insert type does the cutter accept? The cutter accepts CCMT 09T3 indexable inserts; their common availability simplifies replacement and optimises uptime for the DF200TM disc milling cutter. What is the maximum recommended axial engagement? A recommended axial engagement of 70 mm is indicated for heavy passes where machine power and setup stiffness allow; the actual depth should be chosen according to the workpiece material and machine capability. Which toolholder connection is required? The tool is supplied with a 40 mm shank for secure mounting; compatibility with the machine spindle or arbor adapter should be confirmed prior to fitting. How are the inserts secured and replaced? Inserts are fastened with M3.5x9 Torx screws, requiring a T15 key for repeatable torque and quick replacement during maintenance cycles. Is the DF200TM suitable for CNC production runs? Yes — the indexable-insert concept and robust geometry make the DF200TM appropriate for CNC production, offering predictable performance and reduced cycle times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a practical combination of extended reach and secure clamping: the extension provides a 200 mm overall length with a robust M12 thread and a 25 mm shank diameter to maintain stiffness during deep milling operations. Order the extension directly via Metav Werkzeuge or contact our technical consultants for application advice. Extension for screw-in cutters VT516TM — 200 mm overall length, M12 thread (Teknik Makina) The Extension for screw-in cutters VT516TM is a purpose-made tool extension that increases reach for recessed and deep milling tasks while retaining tool stability for both CNC and manual machining applications 200 mm overall length for extended reach M12 threaded connection for secure mounting 25 mm shank diameter fits standard holders Accepts cutters with 20.7 mm receiving bore Extended reach without sacrificing rigidity Longer tool reach is often necessary for machining recessed features, but length can reduce stiffness and increase vibration. This extension solves that trade-off by offering a 200 mm overall length combined with a 25 mm shank diameter, which preserves axial and lateral rigidity compared with thinner extensions. The design reduces the need for multiple special-length cutters and therefore supports more efficient tool management in the workshop. Fewer tool changes and predictable deflection characteristics contribute to smoother feeds and more consistent surface finishes. Secure seating and repeatable clamping for screw-in cutters For screw-in milling cutters the connection quality determines repeatability. The extension uses an M12 thread and accepts cutters with a 20.7 mm receiving bore, while an internal 40 mm taper ensures precise seating and axial support. These features enable reliable torque transfer from the holder to the cutting head and help maintain concentricity during rotation. The combination of threaded retention and tapered contact gives a balance of positive locking and accurate alignment, which is particularly valuable when machining narrow pockets or when tool run-out must be minimised. Practical workshop advantages and handling Weighing 0.744 kg, this extension is heavy enough to feel substantial yet light enough for straightforward handling during tool changes. The sturdy construction supports workshop routines in both small-scale shops and production environments, including CNC milling centres and manual machines. Fitment is straightforward: screw the cutter into the receiving bore and secure via the M12 thread, ensuring the taper seats fully. For operational safety and best results, final tightening should follow the cutter manufacturer’s torque recommendations and a balance check is advised for high-speed applications. Contact Metav Werkzeuge for tailored application advice and to arrange supply from our Emmerich stock on +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: VT516TM Manufacturer: Teknik Makina Overall length: 200 mm Shank diameter: 25 mm Receiving bore for cutter: 20.7 mm Internal taper length: 40 mm Thread: M12 Weight: 0.744 kg Special features Designed for screw-in milling cutters Tapered seating for repeatable alignment M12 threaded retention for secure mounting Compatible with standard 25 mm toolholders FAQ Which cutters fit this extension? The extension accepts screw-in milling cutters with a receiving bore of 20.7 mm; compatibility is ensured when the cutter’s seating matches the 40 mm taper and the M12 thread type. Is the extension suitable for CNC use? Yes, the extension is designed for both manual machines and CNC milling centres; the 25 mm shank diameter helps maintain rigidity under typical machining loads. How should the cutter be mounted for safe operation? Screw the cutter into the receiving bore, ensure the 40 mm taper is fully seated, then tighten to the cutter manufacturer’s recommended torque; balance checks are advised for high-speed milling. What is the overall length and how does it affect machining? The overall length is 200 mm, which increases accessibility for deep or recessed features while the larger shank diameter helps limit deflection compared with slimmer extensions. Can the extension be used with different holder systems? The extension is intended for standard holders accepting a 25 mm shank; confirmation of holder compatibility should be done against holder specifications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high productivity, precise insert compatibility and robust spindle mounting for uninterrupted milling cycles — order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific setup and tooling advice. Indexable Disc Cutter DF194TM — 200 mm diameter, CCMT 0602 compatible, Teknik Makina The DF194TM disc cutter is a heavy-duty indexable milling tool designed for high-throughput milling operations where stable mounting and quick insert changes are essential. 200 mm diameter for high material removal Compatible with CCMT 0602 indexable inserts 18 cutting edges for smooth chip flow 40 mm arbor for rigid spindle mounting Optimised for high material removal and short cycle times The disc cutter is engineered to deliver consistent chip removal with its 200 mm diameter and 18 cutting edges. A larger cutter diameter increases effective cutting circumference, enabling higher feed per revolution and reduced cycle times in series production. The tool’s 70 mm axial depth capability allows substantial engagement per pass, which translates into fewer passes and improved throughput while maintaining surface integrity. Tooling economy through standard indexable inserts Compatibility with CCMT 0602 indexable inserts reduces downtime and tooling cost: worn edges are fast to replace and carbide inserts can be sourced globally. Indexable systems separate expensive tool bodies from consumable inserts, providing a predictable cost-per-part and simple inventory management. For workshops introducing insert tooling, this cutter offers clear savings in maintenance time and reproducible cutting performance. Rigid mounting and repeatable stability for accurate results A 40 mm arbor interface ensures a stiff connection to the spindle, which reduces vibration and improves dimensional consistency. Fastening uses M2.5x7 Torx screws tightened with a T08 key for secure insert clamping and straightforward service routines. The cutter’s 8 mm cutting height provides adequate insert engagement for robust stock removal without compromising insert life, while the tool mass of 1.587 kg contributes to stable running at moderate spindle speeds. Designed for industrial production and easy integration This indexable disc milling cutter suits machine shops that value repeatability and simple maintenance. The modular concept of indexable inserts supports rapid changeovers and predictable performance across batch and continuous processes. Technical staff will appreciate the straightforward clamping system and standard insert format, which facilitate quick training and fast integration into existing tool sets — for specialist set-up recommendations, Metav Werkzeuge can advise on optimal spindle speeds and feed strategies. Discuss Teknik Makina’s DF194TM with Metav Werkzeuge to define the best insert choice and spindle setup for specific machining tasks — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and reliable supply from Emmerich. Technical data Article number: DF194TM Manufacturer: Teknik Makina Product: Indexable disc cutter Designation: Disc cutter DF194TM Facts Diameter: 200 mm Number of cutting edges: 18 Cutting height: 8 mm Arbor diameter: 40 mm Maximum axial depth (ap): 70 mm Weight: 1.587 kg Special features Compatible inserts: CCMT 0602 Fastening screws: M2.5x7 Torx, key T08 SKU: DF194TM FAQ What insert type does the cutter take? The cutter accepts CCMT 0602 indexable inserts; this standard format simplifies insert sourcing and replacement for the DF194TM disc cutter. How is the tool mounted to the spindle? Mounting is via a 40 mm arbor connection; this rigid interface is designed for stable clamping and improved running accuracy for the DF194TM. How many cutting edges are fitted and what is the benefit? There are 18 cutting edges, which offer continuous engagement to smooth chip flow and increase material removal per revolution. What is the maximum axial engagement for this cutter? The cutter provides an axial depth capacity of 70 mm, enabling deeper cuts and fewer passes in suitable milling operations. Which fastening hardware is supplied for the inserts? Fastening uses M2.5x7 Torx screws tightened with a T08 key, allowing secure insert clamping and straightforward service procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust head designed for consistent face-milling performance: the combination of a 200 mm diameter, security-focused 60 mm mounting and compatibility with SPKN 1203 indexable inserts supports high material removal and predictable process stability. Order the T160TM directly via Metav Werkzeuge or consult their specialists for technical guidance. Planing cutter head T160TM — 200 mm diameter, for SPKN 1203 indexable inserts (Teknik Makina) The planing cutter head is a purpose-built milling head for face milling and planing operations, compatible with SPKN 1203 indexable inserts and intended for industrial production environments 200 mm diameter for wide-area machining Holds SPKN 1203 indexable inserts 12 cutting edges for high material removal 60 mm bore with secure M8 clamping screw Increased productivity through optimised cutting geometry The head is engineered to deliver reliable stock removal with an emphasis on steady cycle times. With a 200 mm diameter and 12 cutting edges, the design spreads cutting forces and reduces load per tooth, which results in smoother engagement and extended insert life. The 75° cutting angle reduces axial forces and supports stable toolpaths, enabling higher feed rates without compromising surface quality. This configuration is particularly effective for batch production where reduced downtime and predictable tool change intervals increase throughput. Fast tool changes and clear mounting interface Maintenance and insert replacement are simplified by a standardised mounting arrangement and accessible clamping hardware. The 60 mm mounting bore combined with a dedicated M8x24-L clamping screw and a 5 mm Allen key enables secure fastening and quick service intervals. The straightforward interface minimises set-up time on the machine spindle and reduces the risk of incorrect assembly; the available hardware specification supports repeatable seating and torque application, which preserves concentricity and balance during operation. Robust construction for consistent performance Built for workshop and shop-floor conditions, the head’s mass supports vibration damping and steadier cutting action; the unit weight of 6.542 kg contributes to inertial stability during heavy cuts. The overall length of 62 mm ensures a compact centre of gravity, aiding rigidity when mounted on typical toolholders. These mechanical characteristics translate into uniform chip formation and comparable surface roughness across long production runs, so finish and dimensional control are improved without adding complexity to machining parameters. Practical applications and machining benefits This head is intended for face-milling, planing and broad-surface skimming tasks where indexable inserts provide economical cutting performance. Compatibility with SPKN 1203 indexable inserts allows combination with established insert grades for steel, alloyed steel and cast materials, offering flexibility across workpiece types. The design supports predictable tool life and straightforward repurposing for different insert geometries, which is an economical route to maintain process capability while keeping inventory management simple. Contact Metav Werkzeuge in Emmerich for tailored technical advice and reliable supply of the T160TM planing cutter head; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: T160TM Designation: planing cutter head for SPKN 1203 indexable inserts Manufacturer: Teknik Makina Core data Diameter: 200 mm Mounting bore: 60 mm Total length: 62 mm Weight: 6.542 kg Cutting angle: 75° Cutting edges: 12 Special features Compatible with SPKN 1203 inserts Clamping screw: M8x24-L Allen key size: 5 mm SKU: T160TM FAQ What insert type fits this cutter head? The cutter head accepts SPKN 1203 indexable inserts; the geometry is configured for these inserts to ensure correct seating and reliable cutting performance. What is the required mounting interface? A 60 mm mounting bore is specified for the head; use the recommended holder and tighten the M8x24-L clamping screw with a 5 mm Allen key for secure attachment. How many cutting edges are available and what does that mean? The head carries 12 cutting edges, which distributes cutting forces and reduces the load per insert, improving surface finish and extending insert life under continuous operation. Is the head suitable for heavy stock removal? Yes. The combination of a 200 mm diameter, 75° cutting angle and substantial mass supports stable heavy cuts while maintaining surface consistency. What length and balance considerations should be noted? The overall length is 62 mm; the compact profile and weight of 6.542 kg aid rigidity and balance when mounted correctly on a compatible spindle. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of robust material removal, precise indexable insert compatibility and secure clamping for stable machining. The unit's 200 mm diameter and 16 cutting edges deliver efficient throughput while compatibility with CCMT 09T3 inserts keeps tooling costs predictable — order directly via Metav Werkzeuge or consult our specialists for application advice. Disc milling cutter DF198TM by Teknik Makina — 200 mm, for CCMT 09T3 inserts Disc milling cutter DF198TM designed for high-efficiency indexable insert milling in production environments, suitable for operations requiring multiple cutting edges and a secure Ø40 mm arbor *200 mm diameter for high material removal *Compatible with CCMT 09T3 indexable inserts *16 cutting edges for smooth chip evacuation *Ø40 mm shank for secure clamping Faster cycle times through high cutting capacity With a large working diameter and a high tooth count the tool achieves rapid material removal while maintaining surface quality. The 200 mm cutting diameter and 16 cutting edges reduce the number of passes required, shortening cycle times on repetitive turning-to-mill operations. Where slotting or heavier shoulder milling is necessary the cutter's design supports elevated feed per tooth without compromising tool life, which helps to maintain steady production throughput. Secure clamping and straightforward maintenance A robust mounting interface ensures repeatable seating and minimal runout: the cutter accepts a Ø40 mm arbor and is supplied with fastening elements specified as M3.5x9 Torx screws, tightened with a T15 key. The accessible screw layout and standard Torx hardware simplify indexable insert changes and reduce downtime during tool service. At a net weight of 2.4 kg the assembly balances handling convenience with structural rigidity for stable cutting. Insert system that controls tooling costs The cutter uses CCMT 09T3 indexable inserts, a common geometry that allows selection from a broad range of chipbreakers and grades. Using indexable inserts helps to lower per-edge cost because worn edges are replaced rather than the entire tool. The cutter head provides a 12 mm maximum insert cutting height, enabling deeper engagement for roughing cuts while preserving the ability to fine-tune finishing parameters through insert choice. Designed for dependable shop-floor performance Constructed for production contexts, the milling head offers a maximum axial engagement of 70 mm (ap) where suitable, permitting efficient shoulder and face milling operations when combined with appropriate machine rigidity. The balanced arrangement of cutting edges promotes stable cutting dynamics and consistent component quality across batch runs. The geometry supports effective chip flow and contributes to longer insert life when paired with correct machining parameters. Select Teknik Cutting Tools' DF198TM for demanding indexable milling tasks — contact Metav Werkzeuge for tailored application guidance and assured supply from Emmerich. Technical data SKU: DF198TM Manufacturer: Teknik Makina ECLASS: 21180704 ETIM: EC011860 Data Diameter: 200 mm Cutting edges: 16 Cutting height: 12 mm Shank diameter: 40 mm Ap (axial engagement): 70 mm Weight: 2.4 kg Special features For CCMT 09T3 indexable inserts Torx screws M3.5x9 Torx key T15 required 16 teeth configuration Ø40 mm arbor connection FAQ Which insert type is required for this cutter? The DF198TM disc milling cutter uses CCMT 09T3 indexable inserts; compatible insert grades and chipbreakers will be selected according to the material and desired surface finish. What are the main dimensions and tooth count? This cutter has a nominal diameter of 200 mm and is equipped with 16 cutting edges, offering a balance between material removal rate and surface quality. How is the cutter mounted and fastened? The tool mounts on a Ø40 mm arbor and is secured with M3.5x9 Torx screws; a T15 Torx key is used for tightening during insert changes. Can the cutter handle deep axial cuts? The design supports an axial engagement up to 70 mm depending on machine capability and cutting parameters; appropriate feeds and depths should be chosen to match machine rigidity. How much does the assembly weigh and what does that imply for handling? The complete assembly weighs 2.4 kg, which provides a stable, robust tool for production use while remaining manageable for manual handling during tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust cutting performance and quick insert changes thanks to the combination of a large effective diameter and multiple cutting edges; the result is steady material removal and reduced cycle times. For machine compatibility, note the 60 mm bore and manageable 6.69 kg mass. Order the planing cutter head directly via Metav Werkzeuge or ask the consultants for application advice. Planing cutter head T335TM — 200 mm diameter, 14 cutting edges (Teknik Makina) The Planing cutter head T335TM is a heavy‑duty face milling solution designed for SNKX 1206 indexable inserts and industry‑grade turning and milling operations. 200 mm body diameter for broad coverage 14 indexed cutting edges for continuous cutting Compatible with SNKX 1206 indexable inserts M4 x 12.5 Torx screws; T15 key required High throughput from a large, stable cutting platform This milling head delivers consistent material removal by combining a 200 mm body diameter with an effective cutting diameter of 213 mm, enabling wider cuts per pass and fewer tool changes. The multiplicity of 14 cutting edges spreads the cutting load, reducing vibration and improving surface quality. For production environments seeking measurable productivity gains, the configuration supports faster cycle times and predictable tool life, which helps to plan tool-change intervals and reduce unplanned downtime. Simple service and machine compatibility to keep lines running Maintenance and insert replacement are straightforward: the head secures inserts designed for the SNKX 1206 designation and uses M4 x 12.5 Torx screws tightened with a T15 key, allowing fast, repeatable clamping. The 60 mm bore ensures compatibility with many standard arbor systems, while the unit mass of 6.69 kg influences handling and balancing procedures — relevant when checking spindle load and set‑up times. Clear specifications make it easier to verify machine suitability before purchase and to plan changeover workflows. Versatile in application with an optimised cutting geometry The head uses a 45° cutting angle, which balances axial and radial forces to provide a compromise between material removal rate and surface finish. That geometry is well suited to a range of milling tasks, from semi‑roughing to finishing passes, where controlled chip evacuation and consistent tool engagement matter. Where different insert makers are preferred, compatibility with suppliers such as Böhlerit, Korloy and Palbit gives flexibility in selecting grades that match workpiece material and cutting conditions. Metav’s product selection aims to make precise tooling accessible for both workshop and industrial settings. Contact Metav Werkzeuge for tailored technical advice and supply of the Teknik Makina T335TM planing cutter head; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss machine compatibility and delivery options Technical Data Article number: T335TM Manufacturer: Teknik Makina Product: Planing cutter head for SNKX 1206 indexable inserts Facts Body diameter: 200 mm Maximum cutting diameter: 213 mm Shank / bore diameter: 60 mm Weight: 6.69 kg Number of cutting edges: 14 Overall length: 63 mm Cutting angle: 45° Torx screws: M4 x 12.5 mm Torx key: T15 Special features Compatible insert type: SNKX 1206 Compatible insert manufacturers: Böhlerit, Korloy, Palbit SKU: T335TM eClass: 21181015 FAQ Which insert type does this cutter head accept? The head accepts SNKX 1206 indexable inserts; compatible suppliers include Böhlerit, Korloy and Palbit. What are the key dimensions to check for machine compatibility? Verify the 60 mm bore and the overall mass of 6.69 kg, plus the maximum cutting diameter of 213 mm, to confirm spindle and arbor compatibility for the T335TM. How many cutting edges are fitted to the head? The tool is configured with 14 cutting edges, which support continuous cutting and reduced vibration during milling. Which fasteners are used for the inserts and what tool is required? Inserts are secured with M4 x 12.5 Torx screws and require a T15 key for tightening and removal. What cutting geometry does the head use and why is that beneficial? The head has a 45° cutting angle, offering a balance between material removal rate and surface finish for a range of milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 90° turning solution that combines precise square-shoulder performance with straightforward insert compatibility; the rigid 60 mm shank and secure Torx fastening reduce setup time and improve process stability. Order the component directly via Metav Werkzeuge or consult our specialists for a tailored quotation and machining advice. Eckmesserkopf T193TM — 90° corner turning head for APKT 1604 indexable inserts by Teknik Makina A versatile 90° corner turning head, the Eckmesserkopf T193TM is designed for external turning and shoulder work with APKT 1604 indexable inserts, suited to heavy‑duty workshop environments Compatible with APKT 1604 inserts 90° cutting angle for square shoulders 60 mm shank diameter, rigid mounting Torx M4x10 screw with T15 key Engineered for accurate square-shoulder machining The turning head delivers a 90° cutting angle that simplifies shoulder and contour machining while maintaining consistent edge engagement. The geometry is optimised so that each indexed insert sits precisely in the pocket, allowing the tool to create true square shoulders without repeated adjustments. This stability translates into measurable reductions in rework and fixture time, ensuring the machining process is both dependable and predictable for batch production and single-part runs. Fast, secure insert changes for uninterrupted production Compatibility with APKT 1604 indexable inserts and Korloy standards enables quick insert replacement and wide availability of cutting grades. Fixing is via an M4x10 Torx screw operated with a T15 key, a familiar fastening standard in industrial tooling that supports controlled torque application and reduced risk of slip. The combination of standardised inserts and positive clamping supports fast changeovers, keeping machine downtime to a minimum and improving overall throughput. Robust design that reduces vibration and extends tool life A solid construction with a 60 mm shank diameter and substantial mass (approx. 6.37 kg) delivers enhanced rigidity at the toolholder interface. The increased stiffness helps dampen chatter and maintain cutting stability under load, which preserves insert life and supports superior surface finish. For workshops seeking consistent quality across varied batches, this turning head offers the mechanical stability required for repeatable results in turning operations. Integration and maintenance made straightforward The head’s nominal cutter diameter and compact overall length simplify integration into existing turret and toolpost arrangements without extensive modifications. Routine maintenance focuses on checking the M4x10 fastening and ensuring insert seats are free from chips and coolant residue; this straightforward service routine keeps the tool in peak condition and avoids unexpected interruptions. The component is supplied as SKU T193TM, making reorders and stock management unambiguous for procurement teams. For dedicated technical guidance or a tailored quotation for the Teknik Makina T193TM 90° corner turning head, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T193TM Name: Eckmesserkopf Type: Turning head for APKT 1604 indexable inserts Manufacturer: Teknik Makina ECLASS: 21181015 Numbers / Core technical data Shank diameter: 60 mm Weight: 6.37 kg Overall length: 63 mm Cutter diameter: 200 mm Cutting edges: 12 Cutting angle: 90° Designs / Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 Files: 62de7efa148ec6b71020ffcf, 62de7dc60aced56449540e7c FAQ Which indexable inserts fit this turning head? The T193TM is designed for APKT 1604 indexable inserts; Korloy APKT 1604 grades are directly compatible. What are the main mounting dimensions to check before fitting? Check for a 60 mm shank diameter and ensure turret or holder accepts a 63 mm overall length profile for correct integration. Is the tool suitable for heavy machining and long runs? Yes. With a substantial mass of 6.37 kg and a rigid 60 mm shank, the turning head is built for stable machining in extended production sequences. Which fastening hardware is required for insert retention? Insert retention uses an M4x10 Torx screw tightened with a T15 key to secure each APKT 1604 insert. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise slotting, quick indexable insert changes and a secure 40 mm arbor for consistent production performance; order directly via Metav Werkzeuge or consult our specialists for installation advice. Disc milling cutter DF118TM — 200 mm diameter, SCMT 09T3 indexable inserts (Teknik Cutting Tools) A robust Disc milling cutter DF118TM designed for slotting and side milling on conventional and CNC milling machines, engineered to accept SCMT 09T3 indexable inserts for fast reconditioning and repeatable results *200 mm diameter for wide slotting *Holds SCMT 09T3 indexable inserts *40 mm arbor bore for secure mounting *12 mm effective cutting height Precise slotting with fast, repeatable insert changes The disc design delivers stable chip evacuation and consistent cutting engagement across the full 200 mm diameter, while the insert pocket geometry is optimised for SCMT 09T3 indexable inserts. Using indexable tips reduces downtime because blade edges are replaced rather than the whole tool; this translates into measurable process efficiency and lower running costs. The cutter provides a defined 12 mm effective cutting height and 14 cutting edges distributed to maintain balance and surface finish quality during repetitive slotting operations. Secure mounting and straightforward setup for production use A solid 40 mm arbor bore ensures a rigid pull‑fit on the spindle, supporting stable cutting even when higher axial engagement is required. Fastening uses M5x12 Torx screws with a T20 key for repeatable clamp force and rapid insert changes. With a compact mass of 2.14 kg, the assembly combines stiffness and manageable handling during tool changes. The specified 65 mm axial capability permits deeper passes where the process demands higher material removal, while the Torx fixation limits insert rotation for safer operation and consistent chip formation. Productivity gains through application versatility and maintenance ease Designed as a modular cutting solution, the tool accepts commonly stocked SCMT 09T3 inserts, enabling predictable spare‑parts logistics and predictable machining costs. The indexable system supports quick edge exchange, reducing set‑up time and preserving spindle availability for production. The cutter is suited to repetitive slotting and light side milling tasks on milling machines, where tool stability and repeatability are priorities; the combination of diameter, insert format and arbor specification delivers a balance of cutting performance and economical tool life. For detailed application guidance on the Teknik Cutting Tools disc milling cutter DF118TM and reliable supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge for tailored advice and ordering support via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: DF118TM Manufacturer: Teknik Makina Designation: Disc milling cutter Suitable inserts: SCMT 09T3 Facts Diameter: 200 mm Arbor bore / attachment diameter: 40 mm Effective cutting height: 12 mm Axial capability (ap): 65 mm Cutting edges: 14 Weight: 2.14 kg Torx screw: M5x12 Torx key size: T20 Special features Accepts SCMT 09T3 indexable inserts Designed for slotting and side milling Torx‑fastened inserts for secure clamping Suitable for conventional and CNC milling machines FAQ Which inserts are required for this cutter? The cutter uses SCMT 09T3 indexable inserts; replacement tips conforming to that ISO designation are compatible with the DF118TM assembly. What arbor size is needed to mount the tool? A 40 mm arbor bore is specified for mounting; ensure the machine spindle or arbor adapter matches this diameter for a secure fit. How deep can the cutter engage axially? The tool supports an axial capability of 65 mm, permitting deeper passes when process parameters and machine rigidity allow. How many cutting edges are fitted? The cutter carries 14 cutting edges, distributed to maintain balance and continuous cutting engagement. What torque system secures the inserts? Inserts are fastened with M5x12 Torx screws tightened using a T20 key to ensure repeatable clamp force and safe operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust indexable cutting and precise insert compatibility for reliable high‑volume milling; the combination of a Ø 200 mm cutter, 14 cutting edges and a 40 mm arbor supports stable, efficient machining — order directly via Metav Werkzeuge or consult our specialists for setup advice Disc cutter DF116TM — indexable disc cutter, Ø 200 mm, 14 cutting edges, Teknik Makina the Disc cutter DF116TM is an indexable disc cutter designed for industrial milling applications where high material removal and quick insert changes are required Ø 200 mm for wide cutting paths 14 cutting edges for continuous material removal Compatible with SCMT 09T3 indexable inserts 40 mm arbor and ap 65 mm axial depth capacity Efficient cutting performance for industrial production The design delivers consistent throughput: with a Ø 200 mm diameter and 14 cutting edges, the tool enables higher feed per revolution while maintaining surface quality. The arrangement of multiple teeth reduces chip load per edge, which supports steady cutting forces and longer insert life. By choosing an indexable solution with proven insert geometry, workshops gain a predictable, economical approach to batch machining where repeatability and cycle stability are priorities. Ease of maintenance and secure clamping Changeover and service are simplified through compatibility with SCMT 09T3 inserts and standardised fixing hardware. The cutter accepts M4x11 Torx screws (Torx key T15), making routine insert replacement and torque application straightforward with common tools. The 40 mm arbor interface ensures secure mounting and improved runout performance, while the 10 mm cutting height permits use of the specified triangular inserts without overhang. The solid construction and a mass of 1.738 kg contribute to balance and vibration resistance in moderate to heavy cutting conditions. Practical benefits for workshop integration Axial depth capacity (ap 65 mm) and the disc geometry suit slotting or face milling operations where a wide engagement and contiguous cutter path are required. The indexable concept reduces tooling cost per edge compared with solid tools, since worn inserts can be rotated or replaced. The compact fixing system and standard insert family simplify stocking and reduce downtime. For tailored process integration or to confirm suitability for particular materials and machines, Metav Werkzeuge offers application guidance and parts supply from its Emmerich site For machining enquiries or to specify tooling for a dedicated process, contact Metav Werkzeuge to discuss the Teknik Cutting Tools disc cutter DF116TM and arrange local supply from Emmerich Technical data Article number: DF116TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Facts Diameter: 200 mm Cutting edges: 14 Axial depth (ap): 65 mm Arbor / bore: 40 mm Cutting height: 10 mm Weight: 1.738 kg Special features Compatible inserts: SCMT 09T3 Fixing screws: M4x11 (Torx) Torx key size: T15 Indexable disc cutter design FAQ Which inserts fit this cutter? The DF116TM is designed for SCMT 09T3 indexable inserts; this triangular insert family provides the correct seat and cutting height for reliable clamping and repeatable geometry. What diameter and cutting edges does the cutter have? The indexable disc cutter features a 200 mm diameter with 14 cutting edges, giving a balance of feed capability and surface finish for face and slot milling. What arbor and bore size are required? A 40 mm arbor bore is specified for mounting, providing a secure interface that supports reduced runout and improved stability during milling. What fastening hardware is used for the inserts? Insert clamping uses M4x11 Torx screws; the required key size for clamping torque is T15, which is common in workshop maintenance toolkits. Is the cutter suitable for heavy material removal? The disc geometry with 14 cutting edges and an axial depth capacity of ap 65 mm is intended for robust engagement; process parameters must be adapted to the material and machine rigidity for optimal performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a wide Ø200 mm cutting diameter, 12 cutting edges and a secure M5x12 Torx clamping system for efficient face milling; order directly via Metav Werkzeuge or consult the technical team for tailored configuration. Planing cutter head (T634TM) – face milling head Ø200 mm, 12 cutting edges by Teknik Makina Planing cutter head for robust face milling applications; compatible with SNKX 1606 and ONHX 0606 indexable inserts for versatile production use Ø 200 mm diameter for wide coverage 12 cutting edges for consistent material removal M5x12 Torx clamping with T20 key Faster stock removal with a large diameter and optimised cutting angle The large Ø200 mm cutting diameter combined with a 45° cutting angle allows the cutter to cover more surface per pass while maintaining predictable cutting forces. This configuration reduces the number of passes required on planar surfaces, which improves cycle times and steady-state throughput. The head’s mass—8.112 kg—and its 60 mm mounting diameter help deliver the rigidity expected in heavy-duty face milling, so the tool sustains chatter resistance and provides a stable basis for high-volume production runs. Reliable clamping and straightforward maintenance for minimal downtime A secure clamping arrangement is provided via the supplied M5x12 Torx screw and matching T20 key, ensuring each indexable insert seats firmly during operation. The head accepts SNKX 1606 inserts as standard and is also compatible with ONHX 0606 inserts from Palbit, enabling rapid index changes and predictable regrind cycles. Fewer adjustments are required thanks to the systematic insert geometry and the robust fastening hardware, which together lower maintenance times and support continuous operation in mixed-shop environments. Compatibility that simplifies tooling decisions and inventory Designed for systems using indexable inserts, the milling head supports common industry insert formats—SNKX 1606 and the ONHX 0606 variant—so existing insert stocks can be used without a complete retool. The cutter’s 63 mm overall length and standard 60 mm mounting diameter make it straightforward to integrate into compatible toolholders and turret setups. As a result, purchasing this face milling solution reduces tooling complexity and helps centralise inventory around widely used insert types from established vendors. For robust face milling solutions from Teknik Cutting Tools, contact Metav Werkzeuge to discuss configuration options or to arrange a specification review by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical Data Article number: T634TM Manufacturer: Teknik Makina Product name: Planing cutter head Brand: Teknik Cutting Tools Facts Diameter: 200 mm Cutting edges: 12 Overall length: 63 mm Weight: 8.112 kg Mounting diameter: 60 mm Cutting angle: 45° Special features Compatible inserts: SNKX 1606 Alternative inserts: ONHX 0606 (Palbit) Torx screw: M5x12 Torx key size: T20 Suitable for indexable-insert face milling FAQ Which indexable inserts fit this cutter head? The Planing cutter head accepts SNKX 1606 inserts and is also compatible with ONHX 0606 inserts from Palbit, allowing use of standard indexable inserts for face milling. What is the mounting diameter required for installation? The cutter head requires a 60 mm mounting diameter, matching common heavy-duty toolholders for secure attachment. How many cutting edges are mounted on the head? The head is equipped to carry 12 cutting edges, which promotes even wear distribution and smoother cutting action across the face. What fasteners are used for insert clamping? Insert clamping is secured with an M5x12 Torx screw tightened with a T20 key, providing reliable fixation for production conditions. Is the tool suitable for high-volume production runs? With its Ø200 mm diameter, 12 cutting edges and robust construction, the face milling solution is designed to support continuous, high-throughput machining environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, proven compatibility with DNMG 1104 indexable inserts and a compact 200 mm overall length for efficient turning operations. Order the boring bar directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar DNMG 1104 L200mm — right-hand external turning tool with 93° cutting angle (Teknik Makina) Boring bar DNMG 1104 L200mm is a precision external turning tool engineered for finishing and profiling with DNMG 1104 indexable inserts in standard turning centres and lathes. Compatible with DNMG 1104 inserts 200 mm overall length for deep reach 18 mm clamping height for solid fixation Stable geometry for consistent turning results The bar offers a 93° cutting angle that positions the insert for secure shoulder cuts and close-detail finishing; this geometry reduces unwanted overhang forces and improves repeatability. With a focus on machining stability, the design supports consistent chip formation and helps maintain surface quality across successive passes. Engineers and workshop managers will appreciate the predictable mechanical behaviour that comes from a well-defined approach angle and a right‑hand cutting orientation. Secure clamping and accessible toolholder dimensions Clamping is provided with a clamping height of 18 mm and a cutting head width of 13 mm, ensuring a robust seat for the insert pocket. The configuration allows a compact toolholder footprint while maintaining the rigidity required for medium to demanding finishing operations. The bar’s cutting height of 40 mm gives a clear reference for insert projection and setup, simplifying tool offsets and reducing changeover time during indexable-insert replacements. Practical cutting direction and geometry explained A right-hand cutting direction combined with the near‑perpendicular cutting angle is particularly suited to external facing and finishing where axial approach and radial clearance must be balanced. The nearly 93° angle mitigates rubbing at the corner and supports effective load transfer into the bar shank. For operations that demand repeatable shoulder integrity and dimension control, this geometry provides a reliable basis for predictable tool life and process stability. Ready for integration into workshop tooling systems Weighing approximately 0.5 kg and carrying the stock code AP299TM, the bar integrates easily into existing tool inventories. Its compatibility with the widely used DNMG 1104 family of inserts means minimal changes to tooling standards while enabling quicker adaptation to different materials through insert selection. Supplied specifications support swift programming of offsets and enable efficient planning for consumable rotation and reorder cycles. Discuss insert compatibility and order AP299TM from Teknik Cutting Tools via Metav Werkzeuge for dependable supply and application guidance. Technical data Article number: AP299TM SKU: AP299TM Brand: Teknik Makina Product type: Boring bar Core dimensions Overall length: 200 mm Weight: 0.5 kg Clamping height: 18 mm Cutting head width: 13 mm Cutting height: 40 mm Cutting angle: 93° Cutting direction: right Features & compatibility Compatible with DNMG 1104 indexable inserts Hex key: 2 Allen Category: Boring bars Eclass: 21180806 FAQ Which inserts fit this boring bar? The bar is compatible with DNMG 1104 indexable inserts; selecting the appropriate grade and geometry for the workpiece material ensures optimal results with this boring bar. Is the AP299TM suitable for finish turning on shafts? Yes, the AP299TM from Teknik Cutting Tools is designed for external finishing and shoulder work, thanks to its 93° cutting angle and rigid clamping dimensions. What is the overall length and how does it affect reach? The overall length is 200 mm, providing additional reach for recessed or deep-profile turning while maintaining adequate stiffness for finishing tasks. How does the clamping height influence stability? A clamping height of 18 mm offers a secure seat for the insert pocket, improving stability and reducing vibration during medium- to fine-finishing operations. Can this bar be used for both roughing and finishing? The geometry and rigidity are geared toward finishing and profiling; for heavy roughing, alternative toolholders with larger shank diameters may be preferable. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust machining stability with simple insert replacement: the 25 mm shank and 45 mm cutting height deliver precise, vibration‑resistant performance for indexable‑insert operations. Order directly via Metav Werkzeuge or consult our specialists for application advice. SIR S25R boring bar – holder for IR16 indexable inserts, 25 mm shank SIR S25R is a compact boring bar designed for indexable IR inserts, optimised for stable, right‑hand cutting in workshop and CNC environments SIR S25R holder for 16 IR inserts 25 mm shank for secure clamping 45 mm cutting height for deep cuts Right‑hand cutting direction Stable clamping for consistent tool life The holder’s 25 mm shank and solid construction reduce vibration and deflection during cutting, which preserves insert geometry and extends tool life. In practice, a rigid shank diameter means repeatable bore accuracy and fewer scrap parts; the specified 45 mm cutting height supports deeper engagement without compromising stability. For production tasks that demand repeatability, this combination improves first‑pass yield and reduces downtime typically caused by rework. Fast insert changes and clear replacement parts Indexable inserts minimise maintenance time because worn edges are replaced instead of the whole tool; the bar is configured for 16 IR inserts and secured with a Torx T15 drive and M3.5x11 screw for reliable clamping. The straightforward fastener arrangement and the use of standard components such as the U plate TA060 make replacement and setup quicker for operators and maintenance staff. This reduces machine idle time and allows predictable scheduling of tool changes. Compact dimensions for flexible workshop integration With a 29 mm diameter, 200 mm total length and a weight of 0.76 kg, the tool offers a balance between stiffness and manoeuvrability for a wide range of setups. The right‑hand cutting orientation is suited to conventional turning and boring cycles on most lathes and CNC machines. Compatibility notes such as the included shim BSP010 and the matching clamping head IR16 assist planners in ensuring proper fitment and avoiding unnecessary adaptations. Discuss application specifics with Metav Werkzeuge in Emmerich — contact our team at info@metav-werkzeuge.com or +49 2822 7131930 to verify integration and optimise tooling strategies Technical Data SKU: K339TM Manufacturer: Teknik Makina ISO designation: SIR S25R Facts Shank diameter: 25 mm Cutting height: 45 mm Diameter: 29 mm Total length: 200 mm Weight: 0.76 kg Special features For 16 IR indexable inserts Right‑hand cutting direction Torx key size: T15 Torx screw: M3.5x11 U plate: TA060 Shim ring: BSP010 Compatible clamping head: IR16 FAQ What insert type fits this boring bar? The bar is configured for 16 IR indexable inserts; use compatible IR16 inserts for correct seating and performance. Which clamping hardware is required for insert replacement? Insert clamping uses a Torx T15 key and M3.5x11 screw; spare fasteners of the same specification are recommended. Is the bar suitable for deep boring operations? The 45 mm cutting height supports deeper cuts while the 25 mm shank helps maintain rigidity for consistent results. Can this tool be mounted in standard holders? The bar’s dimensions (25 mm shank, 29 mm diameter, 200 mm length) allow integration in many common tool setups; check compatibility with the clamping head IR16 and the shim BSP010. What cutting direction does the tool support? The product is designed for right‑hand cutting, matching conventional right‑hand machining cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com