Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of rigid 20 mm shank stability, targeted cooling at the cutting edge, and compatibility with BOMT 1304 inserts for consistent, high-quality milling results — order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter for BOMT 1304 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) Shank milling cutter designed as an indexable-insert milling solution for precise CNC face and slot operations, compatible with BOMT 1304 inserts and engineered for secure clamping and coolant-fed performance. 20 mm shank diameter Internal coolant supply Compatible with BOMT 1304 inserts Includes T10 Torx screw M3.5x8.5 Increased rigidity for repeatable machining and reduced runout The tool's 20 mm shank combined with a 150 mm overall length delivers a balance between reach and rigidity that supports repeatable machining cycles. A stiffer shank reduces vibration and runout, which in turn helps to maintain insert geometry and surface integrity on the workpiece. For production environments where consistent tolerance adherence matters, the robust shank dimension translates directly into fewer scrap parts and more predictable tool life. The compact mass of 0.356 kg keeps toolholder loads moderate while supporting reliable spindle dynamics. Fast insert changes and secure clamping to keep downtime low Designed for BOMT 1304 inserts and accepted by Ingersoll systems, the cutter uses a proven indexable-insert concept that separates cutting edge expenditure from the tool body. The two cutting edges and the 40 mm cutting length enable effective material engagement with reduced cutting forces per tooth. Clamping is secured with a T10 Torx drive and M3.5x8.5 screw, providing a straightforward and repeatable tightening procedure; spare screws and the specified Torx key simplify maintenance. This configuration shortens tool-change intervals and limits operator time spent at the machine, improving overall equipment effectiveness. Coolant-fed cutting for extended insert life and improved surface finish The integrated internal coolant channel supplies cutting fluid directly to the insert seat and cutting edge, which assists chip evacuation and reduces thermal loading on the carbide grade. Direct cooling helps to prevent premature insert wear and to maintain consistent cutting geometry over longer cycles, supporting better surface finishes and tighter tolerances. For mixed-shop environments where switching between roughing and finishing passes is common, the coolant-fed design offers process reliability and reduces the frequency of unscheduled maintenance. Practical compatibility and workshop integration This milling solution arrives as a ready-to-fit shank tool that aligns with standard indexable-insert workflows. The tool body integrates with common tooling systems and is suitable for use in serial production and job-shop contexts where fast insert replacement and reliable clamping matter. Documentation on insert orientation and screw torque should be followed to ensure optimal performance. For technical clarifications on insert grades, clamping torque or specific machining strategies, advisory support is available. Contact Metav Werkzeuge for availability and tailored application advice on this Teknik Makina shank milling cutter — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for concise technical support and next-step ordering. Technical data Article number: S851-1TM SKU: S851-1TM Manufacturer: Teknik Makina ECLASS: 21180806 Label: 20mm Schaftfräser BOMT 1304 L150mm mit Innenkühlung Data Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.356 kg Torx key: T10 Torx screw: M3.5x8.5 Special features Internal coolant supply Compatible with BOMT 1304 indexable inserts Insert manufacturer compatibility: Ingersoll Indexable-insert system for fast tool changes Designed for CNC face and slot milling FAQ What insert type does this cutter accept? The cutter accepts BOMT 1304 inserts, a widely used indexable insert format compatible with the specified clamping screw and seat geometry. Is the tool coolant-fed and what advantage does that provide? Yes, the tool features internal coolant, which directs fluid to the cutting zone to improve chip evacuation, reduce heat at the insert and extend insert life. Which shank diameter and overall length are provided? The tool is supplied with a 20 mm shank and 150 mm overall length, offering a compromise between reach and stiffness for stable machining. How are the inserts secured and what drive is required? Inserts are secured with a M3.5x8.5 screw tightened using a T10 Torx driver, ensuring repeatable clamping and straightforward maintenance. Is this tool compatible with Ingersoll inserts? The tool is compatible with inserts supplied by Ingersoll when the BOMT 1304 geometry is specified by the insert manufacturer. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise machining and secure clamping with a compact design that suits indexable-insert applications; the 20 mm shank and 40 mm cutting length deliver stability and effective cutting, while compatibility with LNMT 0804 inserts and ISCAR systems keeps tool setups simple. Order the S299TM directly via Metav Werkzeuge or ask our consultants if needed. S299TM shank cutter — 20 mm shank, 3‑flute milling tool (Teknik Makina) A robust S299TM shank cutter engineered for milling operations with LNMT 0804 indexable inserts, designed to combine reliable clamping with efficient material removal in workshop and production environments 20 mm shank for stable clamping 40 mm effective cutting length Designed for LNMT 0804 indexable inserts Compatible with ISCAR inserts and M2.5 screw Stable clamping for repeatable results The tool is built around a 20 mm shank, which provides a secure fit in standard toolholders and reduces runout. This stability translates into predictable cutting behaviour and consistent tolerances across serial production. With a 3‑flute geometry, the cutter balances chip evacuation and engagement to maintain tool life while sustaining surface quality. The combination of a rigid shank and optimised flute count reduces vibrations and helps maintain dimensional accuracy during longer passes. Efficient cutting with indexable inserts Designed specifically for LNMT 0804 indexable inserts, the cutter accepts established insert geometries to offer a cost‑effective approach to finishing and semi‑roughing. The 40 mm cutting length allows effective material contact for many common milling tasks, while the Torx fastening (M2.5x7 with T8 key) ensures reliable insert clamping and quick index changes. Using industry‑standard inserts such as those from ISCAR reduces tooling inventory complexity and makes it easier to match grades and chipbreakers to the workpiece material, improving process control and throughput. Practical workshop integration and low handling effort With an overall length of 120 mm and a weight of approximately 0.313 kg, the cutter integrates smoothly into existing tool sets without adding unnecessary bulk. Quick insert changes and a familiar fastening system support fast maintenance routines, reducing machine downtime. The tool’s straightforward interface with common toolholders and inserts helps streamline tooling management, allowing production planners to concentrate on cycle time and surface finish rather than special fixtures or bespoke tooling solutions. For reliable milling with LNMT 0804 inserts, contact Metav Werkzeuge for tailored advice and order handling — Metav Werkzeuge supports fast, transparent delivery from Emmerich to the workshop. Technical data Article number: S299TM Product name: Schaftfräser for LNMT 0804 Indexable Inserts Manufacturer: Teknik Makina Core dimensions Shank diameter: 20 mm Cutting length: 40 mm Overall length: 120 mm Weight: 0.313 kg Number of flutes: 3 Versions & compatibility For LNMT 0804 indexable inserts Compatible insert supplier: ISCAR Fastening screw: Torx M2.5x7 Torx key size: T8 FAQ What inserts does this cutter accept? The S299TM shank cutter is designed for LNMT 0804 indexable inserts; it is compatible with standard grades and geometries used for this insert format. Is the tool compatible with ISCAR inserts? Yes, the cutter is listed as compatible with ISCAR inserts and accepts the LNMT 0804 insert type used by that supplier. Which fastening hardware is required for insert changes? Insert clamping uses a Torx screw (M2.5x7) with a T8 key, enabling quick and secure insert replacement. What shank size and overall length does the tool have? The shank diameter is 20 mm and the overall length is 120 mm, providing a compact, stable tool suitable for many standard toolholders. What advantages does the 3‑flute geometry provide? The 3‑flute layout offers a balance between chip evacuation and cutting engagement, supporting consistent surface finish and extended insert life in many milling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the rigidity of a 20 mm shank, internal coolant and compatibility with LNMU 0303 indexable inserts to maintain consistent cycle times and extend insert life; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. 20 mm Shank Milling Cutter for LNMU 0303 Indexable Inserts – Internal Coolant, L150 mm Shank milling cutter for LNMU 0303 indexable inserts designed for stable, repeatable milling in general machining and finishing operations 20 mm shank diameter for stable clamping Integrated internal coolant for efficient chip evacuation Compatible with LNMU 0303 indexable inserts 150 mm overall length for extended reach Improved accuracy through a rigid shank and balanced geometry A robust 20 mm shank and carefully balanced body deliver reduced runout and high concentricity, which translates into more consistent surface finishes and tighter tolerances during milling. The tool’s three cutting edges distribute cutting forces evenly, lowering vibration and improving tool life. For manufacturing environments where repeatability matters, this stability reduces scrap rates and rework, while also enabling more predictable feed and speed settings on CNC milling heads. Internal coolant and chip control that protect inserts and workpieces The integrated internal coolant supplies lubricant directly to the cutting zone, improving heat management and flushing chips away from the cutting edge. This targeted cooling reduces thermal wear on indexable tips and helps maintain cutting-edge integrity under continuous operation. As a result, replacement intervals are extended and downtime for insert changes is reduced, contributing to a more economical machining cycle and fewer interruptions on production lines. Simplified insert changes and wide compatibility for production continuity Compatibility with LNMU 0303 indexable inserts and endorsement for use with Tungaloy inserts make the cutter versatile across common insert grades. Fast securement via the M2.5x7 screw and access with a T8 Torx key enable swift insert changes and straightforward service routines at the machine. With a 150 mm overall length and 50 mm cutting length, the design supports deeper engagement while keeping the clamped shank as rigid as possible. The result is a practical balance between reach and stiffness that suits batch production and small-series work alike. For tailored technical advice or to secure supply of this Teknik Makina shank milling cutter from Metav Werkzeuge, contact our Emmerich specialists who can confirm suitability and delivery times Technical data SKU: S673-1TM Type: Shank milling cutter for indexable inserts Manufacturer: Teknik Makina Dimensions & core data Shank diameter: 20 mm Overall length: 150 mm Cutting length (shank): 50 mm Number of cutting edges: 3 Weight: 0.381 kg Screw: M2.5x7 Torx key: T8 Features & compatibility Internal coolant Compatible with LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Category: Shank cutters FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; it is configured for standard insert geometry used by Tungaloy and similar suppliers. Is internal coolant supplied through the shank? Yes, the tool features internal coolant delivery routed to the cutting zone for improved chip evacuation and thermal control. How is an insert secured and what tool is required? Inserts are fixed with an M2.5x7 screw accessed using a T8 Torx key, allowing quick and secure insert replacement. What machining tasks is this cutter best suited to? With its rigid 20 mm shank and three cutting edges, the tool is suitable for medium-duty face milling and shoulder milling where repeatability and surface finish are priorities. Can Tungaloy inserts be used reliably with this cutter? Yes, the cutter is listed as compatible with Tungaloy inserts and works with established LNMU 0303 grades for a wide range of materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable insert holder that combines stable clamping, swift insert changes and broad compatibility for efficient milling operations; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter LN100TM (20 mm) by Teknik Makina — for LNMX indexable inserts The Shank milling cutter LN100TM is a precision milling holder designed to accept LNMX indexable inserts for reliable face and slot milling in metalworking and production environments. 20 mm shank diameter for stable clamping Compatible with LNMX 1006 indexable inserts Three cutting edges for efficient material removal Quick insert change via M3x7 Torx screw Stable clamping and consistent cutting quality for series work A robust holder construction delivers reduced runout and predictable cutting performance. The 20 mm shank provides secure clamping in common toolholders and is engineered to maintain concentricity during medium-to-heavy milling cycles. Compatibility with LNMX 1006 indexable inserts means the cutting geometry is defined by industry-standard inserts, allowing tool life and grade selection to be adapted to the workpiece material. The 90° cutting angle yields a reliable face contact for flat surfaces and shoulders, while the overall balance—at roughly 0.285 kg—supports steady spindle dynamics during continuous operation. Faster cycle times through quick insert changes and efficient geometry Operational efficiency is supported by the simple clamping mechanism: replacement inserts are fastened with an M3x7 Torx screw tightened with a T8 key, so downtimes for insert changes are minimised. The holder accepts inserts that present multiple cutting edges in sequence; together with the three cutting edges on the head, this configuration reduces tool-change frequency and keeps machining uninterrupted. The accessible mounting interface is suited to workshop workflows where repeatable, fast insert indexing is required, translating into measurable productivity gains on batch and single-part runs. Versatile use and easy integration with common insert brands Designed for use with Korloy and other LNMX-compatible insert families, the toolholder integrates smoothly into existing tooling suites. The 120 mm overall length and a cutting reach of 25 mm give sufficient reach for face milling and shallow slotting without excessive overhang. Because the head accepts indexable inserts, the operational philosophy is cost-effective: worn edges are indexed rather than replacing an entire solid tool, which lowers consumable costs and simplifies stockkeeping. The holder’s geometry and standardised fixing method make it straightforward to specify when configuring modular tool assemblies for production lines. For technical clarification or to arrange supply from Metav Werkzeuge — leveraging our Emmerich quality filter and fast logistics — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised advice and order support Technical data Article number: LN100TM Manufacturer: Teknik Makina Product type: Shank milling cutter (indexable insert holder) Intended inserts: LNMX 1006 Compatible insert brand: Korloy Fixing screw: M3x7 Torx Core data Shank diameter: 20 mm Number of cutting edges: 3 Overall length: 120 mm Cutting length (shank side): 25 mm Weight: 0.285 kg Cutting angle: 90° Special features For LNMX indexable inserts M3x7 Torx screw; T8 key required Designed for face and slot milling tasks Supplied as holder only; inserts sold separately FAQ Is this holder compatible with standard LNMX inserts? The holder is specified for LNMX 1006 inserts and is compatible with LNMX-grade indexable inserts from Korloy and other manufacturers that match the LNMX 1006 form. Which toolholder or boring bar accepts the 20 mm shank? The 20 mm shank is intended for toolholders and adaptors that accept metric 20 mm shanks; compatibility should be confirmed against the machine’s tool clamping system and the required overhang. How is the insert secured in the cutting head? Inserts are fastened with an M3x7 Torx screw; an appropriate T8 key must be used to achieve the correct clamping torque and secure the insert reliably. What machining tasks suit this holder best? The holder is suited for face milling and shallow slotting where LNMX 1006 inserts provide the required cutting geometry and grade—typical for production and jobbing environments. Are inserts included with the holder LN100TM? The LN100TM is supplied as the shank milling cutter (holder) only; LNMX 1006 inserts must be ordered separately to match the required grade and application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable Ø20 mm shank and two cutting edges to speed up insert changes and maintain consistent results on the shop floor. The combination of precise clamping, indexable RPMW 10T3 compatibility and robust construction supports uninterrupted production — order directly via Metav Werkzeuge or consult the team for application advice. Insert Milling Cutter R316TM — for RPMW 10T3 indexable inserts with Ø20 mm shank The Insert Milling Cutter R316TM is a shank-mounted milling tool engineered for use with Korloy RPMW 10T3 indexable inserts, offering a compact 120 mm overall length for accurate tool projection in machining centres Shank Ø20 mm for secure toolholder fit Compatible with RPMW 10T3 indexable inserts Two cutting edges for efficient material removal Torx screw M3.5×7 with T15 key for fast clamping Stable shank and compact length for repeatable machining The solid Ø20 mm shank and 120 mm overall length provide a compact, rigid setup that reduces vibration and improves repeatability during milling cycles. A shorter tool projection keeps the cutting geometry stable, which translates into consistent surface finishes and reduced tool wear. For operations where clamping reliability and predictable runout matter, this shank-mounted design supports dependable toolholder engagement and easier set-up checks on the machine spindle. Indexable insert system for economical tool management Designed for the RPMW 10T3 insert family, the cutter accepts widely available indexable inserts, enabling quick replacement of cutting edges without regrinding or complex reconditioning. The insert-based approach lowers per-cutting-edge costs and minimises machine downtime: when one edge is worn, the insert is indexed or replaced, restoring cutting performance immediately. This practical strategy supports high utilisation of milling assets and simplifies stockkeeping of consumables. Secure fastening and straightforward maintenance Fastening is handled with a Torx M3.5×7 screw and a T15 key, providing positive clamping torque and repeatable seat pressure for each insert. The two cutting edges balance removal rate with stability, making the tool suitable for a range of general-purpose milling tasks where insert economy and quick changeovers are priorities. Routine maintenance is minimal: check seat cleanliness, confirm screw torque, and replace inserts as required to maintain cutting accuracy. Partnered supply and workshop reliability Supplied by Teknik Makina and distributed by Metav Werkzeuge, the cutter is part of a focused range meant to democratise precision in workshops and production facilities. Metav’s inventory and advisory service help integrate the tool into existing machining strategies, offering clear delivery pathways and practical stocking options. For customers seeking straightforward, reliable tooling solutions, this insert cutter supports efficient tooling workflows and predictable production planning. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina R316TM insert milling cutter and access pragmatic supply from Emmerich for fast integration into production Technical data Article number: R316TM Product name: Insert Milling Cutter R316TM Brand: Teknik Makina Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 120 mm Cutting edges: 2 Special features Compatible inserts: RPMW 10T3 Compatible insert manufacturer: Korloy Torx screw: M3.5×7 Torx key size: T15 SKU: R316TM FAQ What inserts fit this cutter? The cutter accepts RPMW 10T3 indexable inserts; Korloy-made RPMW 10T3 inserts are specified for use with the R316TM. How is the insert secured in place? An M3.5×7 Torx screw secures each insert; the seat is tightened with a T15 key to ensure repeatable clamping. What shank size is required for the toolholder? A toolholder that accepts a Ø20 mm shank is required; the cutter’s Ø20 mm shank ensures a rigid fit in standard collet or shrink-fit systems designed for that diameter. How many cutting edges does the cutter provide? The tool is equipped with two cutting edges, enabling balanced chip removal while keeping the insert change process efficient. Can Metav Werkzeuge advise on integrating the cutter into an existing toolset? Metav Werkzeuge can provide application guidance and stocking advice to help integrate the Teknik Makina R316TM into current tooling strategies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Deliver consistent machining results thanks to internal coolant and a standard 20 mm shank, paired with compatibility for XEKT 1904 indexable inserts; order the end mill directly via Metav Werkzeuge or consult the in-house specialists for application guidance. 20 mm end mill for XEKT 1904 indexable inserts — L200 mm, internal coolant (Teknik Makina) 20 mm end mill for XEKT 1904 indexable inserts is a long-reach milling arbor with internal coolant designed for industrial metalworking tasks that require quick insert changes and reliable chip control. Internal coolant for improved tool life 20 mm shank for standard holders Compatible with XEKT 1904 Korloy inserts 200 mm overall length, 61 mm cutting reach Torx T15 fastening with M4x8.5 screw Run-to-run consistency with indexable inserts The combination of a standard 20 mm shank and an indexable insert system provides a cost-effective approach to machining where repeatable geometry is essential. The insert seat accepts XEKT 1904 style cutters, allowing a rapid exchange of the cutting edge without regrinding. This reduces non-productive time and simplifies inventory management, since individual inserts can be stocked independently of the arbor. The result is stable process control and measurable efficiency gains on the shop floor. Cooling at the cutting edge for longer tool life An integrated internal coolant channel delivers lubricant and coolant directly to the cutting zone, lowering temperatures and improving chip evacuation. Lower thermal load extends insert life and helps maintain dimensional accuracy over longer runs. In applications where heat build-up leads to premature wear, this targeted coolant supply enhances surface finish and reduces the frequency of insert changes, supporting uninterrupted production cycles. Secure clamping and straightforward maintenance The tool is secured with a Torx T15 drive and an M4x8.5 fastening screw for reliable clamping of the single cutting insert. With a 200 mm overall length and a 61 mm cutting reach, the arbor balances accessibility with rigidity for a broad range of milling tasks. The compact mass (approx. 0.412 kg) and standard interface allow quick integration into existing tool holders. Regular servicing is limited to routine insert replacement and torque checks on the fastening screw, keeping downtime to a minimum. Contact Metav Werkzeuge today for tailored advice and to order the Teknik Makina 20 mm end mill with internal coolant (SKU S384TM) — fast dispatch from Emmerich and technical support available for specification matching. Technical Data Article number: S384TM ECLASS: 21180806 SKU: S384TM Core dimensions Shank diameter: 20 mm Overall length: 200 mm Cutting length: 61 mm Weight: 0.412 kg Number of inserts: 1 Features & compatibility Internal coolant: yes Compatible inserts: XEKT 1904 Compatible insert manufacturer: Korloy Torx key: T15 Fastening screw: M4x8.5 Product type: end mill FAQ What insert type does this arbor use? The arbor accepts XEKT 1904 indexable inserts; insert changes are straightforward and fast. Is coolant supplied directly to the cutting edge? Yes — the integrated internal coolant channel supplies fluid to the cutting zone to improve tool life and chip evacuation. Which shank size and overall length are specified? The tool has a 20 mm shank and a 200 mm overall length, with a 61 mm cutting reach. What fastening components are required for assembly? Assembly uses a Torx T15 driver and an M4x8.5 fastening screw supplied with the tool. Can the arbor be used with Korloy inserts? Compatibility is specified for Korloy XEKT 1904 inserts, enabling interchangeability with that insert family. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a modular, productivity-focused milling system that combines compatibility with SECO XNEX 0403 indexable inserts, a secure 20 mm shank for stable clamping and quick Torx fastening; order directly via Metav Werkzeuge or consult our specialists for application support. Indexable Milling Cutter S195TM — for XNEX 0403 inserts, 20 mm shank (Teknik Makina) The Indexable Milling Cutter S195TM is a precision cutter body engineered for modular milling with SECO XNEX 0403 indexable inserts, designed to simplify insert changes and maintain consistent machining accuracy in production environments. Compatible with SECO XNEX 0403 inserts 20 mm shank diameter for secure clamping Three cutting edges for stable material removal Torx M2.5×7 screws, T8 key for quick change Increase machining uptime with modular indexable tooling The S195TM cutter body is built around the proven benefits of indexable inserts, allowing rapid edge replacement rather than full-tool changes. The modular concept reduces tool change time and lowers consumable costs while maintaining process stability. With a 20 mm shank and a 150 mm overall length, the holder offers a balanced combination of reach and rigidity, helping to sustain higher metal-removal rates without sacrificing repeatability. For operations seeking predictable throughput improvements, the interchangeable insert system is a practical step towards leaner tooling logistics. Secure fastening and straightforward maintenance for consistent performance Fastening is handled by Torx M2.5×7 screws, tightened with a T8 key, which ensures reliable clamping of the inserts and simplifies service routines. The three-edge configuration delivers an even load distribution across the cutting circle, enhancing stability during peripheral milling. Maintenance cycles are shortened because consumables are limited to the inserts and the Torx screws; the cutter body itself remains in service longer, reducing total cost of ownership. The robust fastening system also reduces the risk of insert movement under intermittent loads. Practical dimensions that suit standard toolholders and setups Key dimensions—20 mm diameter and 150 mm overall length—are chosen for compatibility with common toolholders used in modern workshops and small production lines. The option to use widely available XNEX 0403 inserts from SECO makes sourcing straightforward and supports rapid replenishment. The three cutting edges are optimised for a compromise between cutting efficiency and surface integrity, providing steady chip evacuation and manageable cutting forces for routine machining tasks. Reliable origin and industrial compatibility Manufactured by Teknik Makina, the S195TM is intended for industrial and trade customers who value modularity, repeatability and simplified inventory. The cutter body is designed to pair with standard insert geometries and clamping concepts, enabling seamless integration into established tooling systems. Where process reliability and supply transparency matter, such modular holders contribute to predictable lead times and consistent part quality. Contact Metav Werkzeuge for customised advice on integrating the Teknik Makina S195TM into existing toolsets or to discuss compatible insert options; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S195TM Manufacturer: Teknik Makina Product: Indexable milling cutter for XNEX 0403 inserts Compatible inserts: XNEX 0403 (SECO) Torx screw: M2.5x7 Torx key: T8 Core dimensions Diameter: 20 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 3 eClass: 21180806 ETIM: EC011860 Features & compatibility For XNEX 0403 indexable inserts Secure Torx fastening Suitable for standard toolholders with 20 mm shank SKU: S195TM FAQ Which inserts fit this cutter? The S195TM is compatible with XNEX 0403 indexable inserts from SECO; this pairing enables straightforward procurement and replacement. What are the key dimensions to check for toolholder compatibility? Verify a 20 mm shank capacity and sufficient tool length for a 150 mm overall length when fitting the cutter body to a toolholder. How many cutting edges does the cutter body accommodate? The cutter body is configured for three cutting edges, providing balanced cutting action and consistent chip removal. Which fastening elements are required for insert clamping? Insert clamping uses Torx M2.5×7 screws tightened with a T8 key to ensure secure and repeatable attachment. Who manufactures the cutter body? The cutter body is produced by Teknik Makina and supplied under SKU S195TM for industrial applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigidity from the 20 mm shank, internal coolant for consistent chip control, and compatibility with industry-standard XNKT 0604 Korloy inserts to maintain steady production and minimise downtime — order via Metav Werkzeuge or consult the team for integration advice. Shank milling cutter for XNKT 0604 indexable inserts — 20 mm shank with internal coolant by Teknik Makina Shank milling cutter for XNKT 0604 indexable inserts designed for precise indexable milling operations where stable clamping and effective cooling improve productivity. 20 mm shank diameter for rigid clamping Internal coolant for improved chip evacuation Compatible with XNKT 0604 Korloy inserts 150 mm overall length with 40 mm cutting length Consistent machining performance through rigid design and coolant This shank milling cutter combines a 20 mm shank with a 150 mm overall length and a 40 mm cutting length to deliver mechanical stability in indexable milling applications. The rigid 20 mm shank minimises deflection under load, which translates into more consistent surface finishes and longer tool life for the cutting system. The tool carries two cutting edges, appropriate for balanced material removal rates while maintaining process reliability. Specified dimensions and geometry help to integrate the cutter into standard holders without unexpected clearance issues. Controlled chip flow and thermal management for longer operating windows Equipped with internal coolant, the tool channels cutting fluid directly to the cutting zone, supporting stable temperatures and controlled chip evacuation. This feature reduces the risk of built-up edge and improves insert life in continuous production. Compatibility with XNKT 0604 indexable inserts from Korloy allows the use of widely available inserts, reducing inventory complexity and enabling quick reconditioning cycles. The internal cooling option is particularly advantageous during extended cuts or when working with tougher materials where thermal control affects cycle time and repeatability. Practical handling, fast indexable changeover and secure fastening The cutter is fitted for secure insert clamping using an M3x7 Torx screw and is serviced with a T8 Torx key for insertion and replacement. These standardised fastenings permit rapid indexable changes, limiting machine downtime during shift changes or maintenance. The tool’s design supports straightforward assembly into common toolholders while the accessible fastening system simplifies routine checks and torque-controlled insert seating. Together, these attributes reduce procedure time and contribute to a dependable production routine. Select the Teknik Makina shank milling cutter for reliable indexable milling and contact Metav Werkzeuge for tailored advice or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S834-1TM ECLASS: 21180806 Brand: Teknik Makina Facts Shank diameter: 20 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.365 kg Special features Internal coolant Compatible with XNKT 0604 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key: T8 FAQ Which indexable inserts fit this cutter? The cutter is designed for XNKT 0604 indexable inserts; compatibility with Korloy XNKT 0604 inserts is specified for the Teknik Makina shank milling cutter (SKU S834-1TM). Does the tool require an external coolant supply? Yes, the tool features internal coolant and requires a compatible coolant line in the toolholder to deliver fluid to the cutting zone. How are the inserts secured and what tool is needed? Inserts are fastened with an M3x7 Torx screw and tightened using a T8 Torx key for secure and repeatable clamping. Is the 20 mm shank suitable for standard holders? A 20 mm shank matches common collet and chuck systems intended for this shank size and provides the rigidity expected for indexable milling cutters. How many cutting edges does the cutter have and what does that mean for feed rates? The cutter has two cutting edges, which offers a balance between material removal and surface finish; cutting parameters should be set according to machine capacity and insert recommendations. What is the article number for ordering or reference? The product is listed as SKU S834-1TM, Teknik Makina shank milling cutter for XNKT 0604 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 20 mm shank and a 40 mm cutting length delivers stable, high‑feed machining with precise indexable insert replacement; benefit from reduced cycle times and predictable tool life. Order the cutter via Metav Werkzeuge or contact our consultants for application advice. Schaftfräser S626TM — 20 mm shank, 40 mm cutting length (Teknik Makina) A robust indexable insert milling cutter designed for medium‑to‑heavy milling tasks, suitable for XOMX 0602‑1204 indexable inserts 20 mm shank diameter for high rigidity 40 mm cutting length for extended engagement Compatible with SECO‑style indexable inserts Three cutting edges for efficient material removal Rigid clamping for stable machining and higher feeds With a 20 mm shank diameter and a total length of 120 mm, the tool is engineered to provide mechanical rigidity that reduces vibration and improves surface finish. The larger shank allows the cutter to be held more securely in standard toolholders, which in turn enables higher feed rates and longer uninterrupted spindle runs. Because the mass is modest at 0.297 kg, handling at the machine and index plate changes remain straightforward while maintaining the stiffness required for demanding operations. Cost‑effective productivity using indexable inserts The cutter is designed for use with indexable inserts, allowing rapid insert changes and predictable tool costing. Fitted inserts minimise downtime: when an edge wears, the insert is rotated or replaced rather than the whole tool being discarded. The combination of three cutting edges and compatibility with common insert formats provides a balance between material removal rate and insert economy, reducing per‑part tooling costs while maintaining consistent cut quality across batches. Quick maintenance and secure insert clamping Insert retention is secured with a Torx M2.5x5.5 screw, accessed using a T8 key, which simplifies service and reduces setup time at the machine. This standardised screw format means maintenance can be completed with widely available tools and clear torque procedures, ensuring repeatable seating of the inserts and reliable cutting performance. The cutter’s geometry, with a 90° cutting angle, is intended to produce predictable chip flow and straightforward programming for CAM operations, making it suitable for both workshop and production environments. Versatility across typical milling tasks Although tailored for XOMX 0602‑1204 indexable inserts and compatible insert systems such as those from SECO, the cutter’s overall specification—20 mm diameter, 40 mm effective cutting length, and three flutes—makes it suitable for a range of materials when paired with the appropriate insert grade. The design supports efficient slotting and peripheral milling where a compact, indexable solution is preferred over solid carbide tools for economics and insert flexibility. For application guidance or to request technical clarification about the Teknik Makina S626TM indexable milling cutter, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert advice. Technical data Article number: S626TM Manufacturer: Teknik Makina SKU: S626TM Core data Shank diameter: 20 mm Cutting length (shank): 40 mm Overall length: 120 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.297 kg Design & features Compatible with XOMX 0602‑1204 indexable inserts Torx screw: M2.5x5.5 Torx key size: T8 Suitable for SECO‑style inserts FAQ What insert types fit this milling cutter? The S626TM is specified for XOMX 0602‑1204 indexable inserts and is compatible with SECO‑style insert formats when the matching seat and clamping parts are used. How is the insert fixed in the cutter? Insert retention on the S626TM is achieved by a Torx screw (M2.5x5.5) tightened with a T8 key to provide secure and repeatable clamping. Is the cutter suitable for heavy milling? The combination of a 20 mm shank and a 120 mm overall length gives the S626TM the rigidity required for medium‑to‑heavy milling when set up correctly in an appropriate holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact right-hand toolholder that combines a 20 mm clamping height and compatibility with DN-- 1504 indexable inserts for stable turning and consistent results; order directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Clamping Holder DDJNR 2020 — DDJNR for DN-- Indexable Inserts (right-hand, Teknik Makina) The Clamping Holder DDJNR 2020 is a right-hand turning toolholder designed for secure clamping of DN-- 1504 indexable inserts, suited to industrial lathe applications and CNC turning operations DDJNR 2020 toolholder design 20 mm clamping height for stability Compatible with DN-- 1504 indexable inserts Right-hand orientation, 93° cutting angle Stable clamping for repeatable turning results The Clamping Holder DDJNR 2020 offers a combination of rigid clamping and a compact profile that supports consistent machining cycles. With a 20 mm clamping height and a 25 mm cutting head width, the design reduces vibration and improves repeatability when working with indexable inserts. The specified DN-- 1504 insert compatibility ensures straightforward tool selection and predictable cutting geometries, while the 93° cutting angle is engineered to deliver reliable chip formation and controlled cutting forces. These characteristics translate directly into less rework and improved throughput on production and job-shop turning tasks. Reduced setup time and predictable tool performance A 125 mm overall length and a moderate 0.426 kg weight balance accessibility and rigidity for common turret and toolpost setups. The holder’s shank designation K15 aligns with standard toolpost interfaces, enabling rapid changeover and secure mounting. The short effective length helps to limit overhang and so improves edge life of the insert by lowering deflection under load. Because the toolholder is configured for right-hand cutting, it integrates naturally into standard lathe programmes and fixturing, speeding setup and minimising adjustment cycles in both small-batch and repetitive production environments. Practical advantages for workshops and production lines This toolholder is aimed at turning and finishing operations where dependable clamping and simple insert replacement are priorities. Compatibility with common DN-- 1504 indexable inserts allows stocking of a limited range of inserts while covering multiple turning tasks. The compact, robust construction supports operators working on diverse materials where tooling stability affects surface finish and tolerance attainment. For buyers seeking a reliable, easy-to-integrate toolholding solution, the combination of standard insert form, measured rigidity and familiar mounting makes this an efficient choice for everyday workshop use. For application guidance or to arrange supply of this Teknik Makina toolholder, contact Metav Werkzeuge in Emmerich for tailor-made advice and order support: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: D171TM Manufacturer: Teknik Makina Designation ISO: DDJNR 2020 Designation: DDJNR for DN-- Indexable Inserts Core data Clamping height: 20 mm Holder width: 20 mm Cutting head width: 25 mm Cutting height: 38 mm Overall length: 125 mm Weight: 0.426 kg Cutting angle: 93° Cutting direction: right Special features Compatible with DN-- 1504 indexable inserts Shank designation: K15 Right-hand orientation Suited to industrial lathe and CNC turning applications FAQ Which inserts fit this holder? The holder is compatible with DN-- 1504 indexable inserts; the DDJNR 2020 geometry secures the insert for standard turning operations. Is the holder suitable for left-hand cutting? This item is configured for right-hand cutting; left-hand applications require a left-orientated holder. What are the mounting dimensions and weight? The item has a 125 mm overall length and weighs approximately 0.426 kg, offering a compact, rigid mounting for typical toolpost setups. Which shank specification is provided? The holder uses the K15 shank designation as listed, matching common turret and post interfaces. Can this holder reduce vibration during heavy cuts? The compact geometry and 20 mm clamping height improve rigidity and help reduce deflection compared with longer, more extended holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a coolant-fed design and ISO A16M shank for precise, stable internal boring. The combination of a 20 mm diameter, compact 150 mm overall length and internal coolant reduces heat build-up and improves chip control — order directly via Metav Werkzeuge or consult our specialists for tailored recommendations. KA109TM 20 mm boring bar A16M – 150 mm with internal coolant (Teknik Makina) KA109TM is a precision 20 mm boring bar designed for coolant-fed internal machining and ISO A16M toolholders. Internal coolant supply ISO A16M shank design 20 mm diameter, 150 mm overall length 11 mm clamping head width Stable cutting and repeatable bore quality A compact geometry and an A16M shank ensure stable cutting and consistent concentricity in internal turning operations. With a 20 mm diameter and a 150 mm overall length, the tool balances rigidity and reach to reduce vibration and improve surface finish. This yields measurable advantages in repeatability and reduces the need for rework. For shops aiming to secure tighter tolerances, the combination of controlled overhang and correct clamping form a reliable basis for predictable results. Effective coolant delivery for consistent chip control The integrated internal coolant channel supplies cutting fluid directly to the cutting edge, supporting efficient chip evacuation and faster heat dissipation. This targeted supply helps maintain edge condition and dimensional stability during extended cycles, particularly under continuous operation. The tool’s right-hand cut geometry complements directed coolant flow to clear chips away from the bore, improving tool life and reducing interruptions for manual clearing. Compatibility, serviceability and rapid insert change Serviceability is straightforward thanks to the standard T8 Torx drive and the supplied M2.5x5.5 fixing screw specification; maintenance routines remain fast and predictable. The 11 mm clamping head width identifies the suitable clamping interface and assists in selecting matching cutting heads or indexable insert holders. These design choices minimise downtime during insert replacement and simplify inventory planning for maintenance teams. Practical value for workshops and CNC centres This boring bar supports high-utilisation environments that demand consistent outcomes from coolant-fed setups. It is particularly suitable where compact tooling and reliable chip control are required for internal machining tasks. The design supports operational efficiency through easier setup, predictable maintenance intervals and fewer process interruptions, contributing to a smoother production flow and better use of machine time. For coolant-fed boring solutions from Teknik Makina, contact Metav Werkzeuge in Emmerich for ordering and technical advice — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: KA109TM Product type: Boring bar ISO designation: A16M Label: 20mm boring bar L150mm with internal coolant Manufacturer: Teknik Cutting Tools; Teknik Makina Core specifications Diameter: 20 mm Shaft diameter: 16 mm Overall length: 150 mm Cutting edge height: 30 mm Clamping head width: 11 mm Weight: 0.246 kg Cutting direction: right Cutting angle: 95° Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant supply ISO A16M shank design Right-hand cutting geometry Compact design for reduced overhang FAQ What type of toolholder fits this boring bar? The KA109TM fits holders compatible with an A16M shank; check the toolholder's clamping specification to ensure a secure fit. Does the boring bar provide internal coolant delivery? Yes. The KA109TM features internal coolant routing to the cutting edge for improved chip evacuation and thermal control. Which fastening hardware is required for insert changes? Insert head assembly uses a T8 Torx drive and M2.5x5.5 fixing screws as specified for the KA109TM. Is the bar suitable for long overhang applications? The tool’s compact 150 mm overall length and 20 mm diameter favour reduced overhang; for extended reach, evaluate stiffness requirements against specific machining conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of internal coolant and DCMT 11T3 insert compatibility for improved chip control and longer tool life; the solid carbide construction and 20 mm diameter ensure rigidity for stable turning. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Boring bar SDUC with Coolant — left-hand, solid-carbid construction (Teknik Cutting Tools) The boring bar SDUC with Coolant provides left-hand turning capability and internal coolant delivery for demanding metalcutting and finishing operations in production environments. *Integrated internal coolant *Compatible with DCMT 11T3 inserts *20 mm rigid solid-carbide shank *Left-hand cutting orientation Consistent rigidity and finish for demanding turning The compact, monolithic construction made from solid carbide delivers high rigidity for stable cutting even at elevated feeds. With a 20 mm diameter and an effective overall length of 200 mm, the bar minimises vibration and deflection, which translates into improved surface finish and extended insert life. This mechanical stability is particularly relevant for precision components and high-volume production where dimensional consistency is imperative. The ISO designation E16R SDUCL 11 denotes the standardised geometry for reliable positioning and repeatable results. Internal coolant for better chip evacuation and tool life The integrated internal coolant channel feeds cutting fluid directly to the insert seat, promoting efficient chip removal and controlled cutting-zone temperatures. Reduced heat buildup lowers wear rates on indexable inserts and helps maintain cutting-edge geometry for longer. In practice, this means fewer tool changes and reduced downtime; the coolant feed is especially advantageous when machining steels and alloys requiring controlled thermal conditions. The left-hand orientation supports applications where reverse cutting direction is specified, combining directional control with the thermal benefits of internal coolant. Insert system and simple maintenance Compatibility with DCMT 11T3 indexable inserts provides flexibility in grade and geometry selection to match workpiece material and finish requirements. The clamping system uses a Torx T15 key and an M3.5x8.5 Torx screw for secure, repeatable insert fixation; these standardised fasteners simplify routine maintenance and reconditioning. As the tool accepts industry-standard inserts, shops can adapt cutting-edge grades or coatings without replacing the entire bar, reducing inventory complexity while maintaining cutting performance. Precision dimensions and secure mounting The bar’s shank features a 16 mm datum for secure reception in tool holders, ensuring concentricity and repeatable alignment. A cutting height of 11 mm aligns with common insert geometries, enabling accurate seat positioning and minimising setup adjustments. Weighing 0.5 kg, the tool balances inertia with manoeuvrability for automated tool changers and manual setups alike. Together, these dimensions support a reliable machining process flow and straightforward integration into existing turning centres and tool systems. Discuss the Teknik Cutting Tools SDUC boring bar (KE43TM) with Metav Werkzeuge for tailored application advice and dependable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KE43TM ISO designation: E16R SDUCL 11 Manufacturer item name: SDUC with Coolant Facts Diameter: 20 mm Overall length: 200 mm Shank diameter: 16 mm Cutting height: 11 mm Weight: 0.5 kg Special features Material: solid carbide Internal coolant: yes Cutting direction: left-hand Compatible inserts: DCMT 11T3 Torx key: T15 Torx screw: M3.5x8.5 SKU: KE43TM FAQ What materials is this boring bar suitable for? The boring bar SDUC with Coolant is intended for typical metalworking applications; compatibility with specific alloys depends on the chosen insert grade and cutting data. How does internal coolant improve machining with this tool? Internal coolant on the KE43TM supplies fluid directly to the cutting edge, improving chip evacuation and reducing cutting-zone temperature, which in turn extends insert life. Which inserts fit this bar? The bar accepts DCMT 11T3 indexable inserts; selecting the appropriate grade and geometry adapts the tool to finishing or roughing tasks. What are the mounting and fastening details for insert changes? Insert clamping uses a Torx T15 key and an M3.5x8.5 Torx screw for secure, repeatable fixing of the insert seat. Is this a left- or right-hand tool and how does that affect setup? This product is a left-hand boring bar; tooling and machine setup must account for the cutting direction when programming and mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of solid carbide construction, internal coolant and a compact 200 mm overall length for stable, efficient boring in series production. Order the boring bar directly via Metav Werkzeuge or contact our consultants for specification advice. SDUC Boring Bar (E16R SDUCL 07) — Solid‑carbide tool with internal coolant by Teknik Makina SDUC Boring Bar (E16R SDUCL 07) is a left‑hand boring bar with internal coolant, engineered for secure indexable‑insert mounting and consistent finish in turning and boring applications Solid carbide construction for high rigidity Internal coolant for optimised chip evacuation Designed for DCMT 0702 indexable inserts 20 mm diameter, 200 mm overall length Stable, repeatable machining through rigid construction The solid carbide body provides high torsional stiffness and vibration dampening, which supports repeatable bore quality in production runs. With a Ø20 mm body and 200 mm overall length, the toolholder reduces deflection compared with longer, hollow alternatives, resulting in improved roundness and surface integrity. For operations requiring reliable dimensional control, the rigid design translates into fewer rework cycles and consistent cycle times. Internal coolant improves tool life and surface finish Integrated internal coolant supplies cutting fluid directly to the cutting edge and the insert pocket. This focused coolant delivery aids chip control, reduces edge temperature and decreases built‑up edge formation. The outcome is extended insert life for DCMT 0702 grades and a superior surface finish on the bore wall. In practical terms, improved heat management often means longer intervals between insert changes and fewer unscheduled stops. Practical compatibility and secure fastening for industrial use The bar accepts DCMT 0702 indexable inserts and secures them with the standard Torx screw specification M2.5 x 5.5 tightened with a T8 key. The ISO designation E16R SDUCL 07 identifies the toolholder geometry for shops standardising tooling layouts. A 16 mm shank diameter ensures stable clamping in common tool posts and turret systems, simplifying integration into existing setups while maintaining concentricity. Designed for efficient workshop handling and maintenance Weighing approximately 0.2 kg, the compact tool is straightforward to manoeuvre during set‑up and changeover, and the accessible screw arrangement speeds insert replacement. Left‑hand cutting orientation is suited to specific turning operations; the bar’s labelled geometry and standard mounting dimensions reduce set‑up uncertainty. For production environments, these small efficiencies add up to measurable time savings across shifts. For production‑proven performance with Teknik Makina’s SDUC boring bar, contact Metav Werkzeuge for availability and tailored technical assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: KE42TM Manufacturer: Teknik Makina ISO designation: E16R SDUCL 07 Facts Diameter: 20 mm Shank diameter: 16 mm Overall length: 200 mm Weight: 0.2 kg Cutting height: 11 mm Special features Material: solid carbide Internal coolant: yes Compatible inserts: DCMT 0702 Cutting direction: left‑hand Torx screw: M2.5 x 5.5 Torx key: T8 FAQ What insert type does this boring bar use? The bar is specified for DCMT 0702 indexable inserts; the pocket and fixation match that insert geometry. Is the coolant delivered internally or externally? Coolant is delivered internally, supplying fluid directly to the insert zone to improve cooling and chip evacuation. Can the bar be clamped in standard toolholders? Yes, the 16 mm shank diameter is compatible with common tool posts and turret clamping systems used in turning centres. Does the bar support left‑hand and right‑hand operations? This tool is configured for left‑hand cutting direction as supplied; opposite orientation would require the corresponding right‑hand version. What fastener is used for the insert and which key is required? Inserts are secured with an M2.5 x 5.5 Torx screw, tightened using a T8 Torx key Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact left‑hand boring bar that combines a 16 mm shank, secure ER16 clamping and a 180 mm overall length for reliable internal turning operations; order or request technical advice directly via Metav Werkzeuge for integration and delivery information. S16Q STIL Boring Bar (STI for IR/ER indexable inserts) – left‑hand, ER16 shank by Teknik Makina The S16Q STIL is a left‑hand boring bar designed for internal turning with IR/ER indexable inserts, offering a compact shank and ER16 clamping for precision machining in confined spaces Left‑hand cutting direction ER16 clamping system 180 mm overall length Compatible with 16 ER inserts Stable performance for internal turning and indexable inserts The holder delivers consistent stability when machining internal features thanks to its robust shank design and predictable geometry. With a 16 mm shank diameter and a 20 mm outer diameter, the toolholder minimises vibration in medium‑duty turning tasks and keeps insert engagement steady. Using indexable inserts reduces downtime for regrinding and cuts tooling costs: the STI concept for IR/ER indexable inserts allows fast insert changes while maintaining repeatable seating and cutting angles. For shops moving from solid tools to modular systems, this design provides a tangible increase in process reliability and a lower total cost of ownership. Secure clamping and straightforward compatibility Designed around the ER16 clamping system, the bar ensures a firm connection to standard collets and holders found in many CNC lathes and turning centres. ER16 compatibility means familiar workshop equipment can be used without additional adapters, simplifying tool inventory and changeover. The nominal cutting height of 40 mm gives enough clearance for common insert geometries, while the left‑hand orientation suits operations where tool approach and spindle direction require inverse cutting. This combination supports efficient toolset standardisation across a production cell. Practical dimensions for tight bores and compact setups With an overall length of 180 mm and a weight of 0.286 kg, the bar is tailored for confined setups where access and rigidity must be balanced. The relatively short length reduces overhang, improving dynamic stiffness and surface finish in internal machining. Where space is limited but accuracy remains critical, the compact footprint of this holder aids in achieving repeatable bore tolerances and consistent cycle times. The tool’s ISO designation and STI engineering reflect an industry‑oriented specification suitable for small to medium batch production. Integrating the tool into workshop workflows Adopting this boring bar aligns with a pragmatic, efficiency‑driven workflow: modular inserts for rapid service, an ER16 interface for broad compatibility and a left‑hand option for specific turning directions. For teams refining their process chain, the tool reduces complexity by matching widely available indexable insert formats and clamping standards. Where traceability or part changeover is required, the simple geometry and standard interfaces make programming and presetting straightforward, helping to reduce set‑up time and keep machines productive. Contact Metav Werkzeuge to discuss fitment and lead times for the Teknik Cutting Tools S16Q STIL boring bar with ER16 clamping, or to request component compatibility advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K361TM Manufacturer: Teknik Makina Eclass: 21180806 ISO designation: S16Q STIL Description: STI for IR/ER indexable inserts Numbers / Core technical data Shaft diameter: 16 mm Outer diameter: 20 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.286 kg Special features Left‑hand cutting direction ER16 clamping system Compatible with 16 ER indexable inserts Suitable for internal turning and insert‑based machining FAQ What clamping system does this boring bar use? The S16Q STIL boring bar uses an ER16 clamping system, providing secure fixation compatible with standard ER16 collets and holders. Is the tool suitable for indexable inserts and which size? Yes, the holder is designed for IR/ER indexable inserts and is compatible with 16 ER insert formats, allowing quick insert changes. Which cutting direction is this bar intended for? This model is manufactured for left‑hand cutting direction, making it suitable for operations where the tool must cut counter to typical right‑hand orientation. What are the key dimensions to consider when setting up? Core dimensions include a 16 mm shank diameter, 20 mm outer diameter, 40 mm cutting height and 180 mm overall length, which together influence reach and rigidity. Who manufactures the product and who is responsible for distribution? The product is supplied by Teknik Makina and distributed via Metav Werkzeuge to European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, direct internal coolant delivery and insert compatibility for stable turning and reliable chip control; order the KE32TM directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar SDUC with Coolant — Teknik Makina, right‑hand, internal coolant, DCMT 0702 compatible Boring bar SDUC with Coolant is a compact turning tool designed for external boring and facing operations where efficient chip evacuation and rigid tool support are required. Internal coolant channel Compatible with DCMT 0702 inserts 16 mm shank for compact toolholders Right-hand cutting, 200 mm overall length Improved process stability through targeted coolant delivery The design places a continuous internal coolant channel directly behind the cutting edge to keep the cutting zone lubricated and to assist chip evacuation. This targeted supply reduces edge temperature and helps maintain tool life under sustained cutting conditions. For shops prioritising consistent cycle times, the coolant feed reduces the need for interrupted cycles caused by chip packing and heat buildup, supporting a smoother production rhythm with fewer unplanned tool changes. Precision clamping and compact shank for tight setups A 16 mm shank provides a compact, stable interface with common toolholders while the tool’s overall 200 mm length balances reach and rigidity. The ISO designation E16R SDUCR 07 describes the shank and orientation for straightforward holder selection. A small mass of 0.2 kg contributes to lower centrifugal loading at higher spindle speeds, which is advantageous for maintaining concentricity and minimising chatter in medium‑duty turning tasks. Simple insert replacement and secure fastening The bar accepts DCMT 0702 indexable inserts, a widely used geometry that permits quick index changes and cost‑effective edge renewals. Fastening is achieved with a Torx screw (T8 key) sized M2.5x5.5, enabling repeatable tightening torque and stable insert seating. This configuration reduces downtime during maintenance and makes the tool suitable for production environments where predictable service intervals and quick interventions are essential. Robust construction and practical cutting orientation Manufactured from solid carbide, the tool body combines rigidity with wear resistance, delivering a firm foundation for the insert seat and coolant passage. The unit is specified for right‑hand cutting, which aligns with standard lathe feed directions for conventional setups. The 20 mm head diameter and 11 mm cutting height are matched to the chosen insert size to provide effective metal removal while preserving insert life and surface finish quality. Contact Metav Werkzeuge to discuss the Teknik Makina KE32TM boring bar SDUC with Coolant and identify the most suitable insert grades and holder combinations; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KE32TM Manufacturer: Teknik Makina ISO designation: E16R SDUCR 07 SKU: KE32TM Key measurements Shank diameter: 16 mm Head diameter: 20 mm Overall length: 200 mm Cutting height: 11 mm Weight: 0.2 kg Features Material: Solid carbide Internal coolant: Yes Insert type: DCMT 0702 Cutting direction: Right-hand Torx key: T8 Torx screw: M2.5x5.5 FAQ What insert type is compatible with this boring bar? The boring bar accepts DCMT 0702 indexable inserts; the KE32TM configuration is prepared for this insert format and secure clamping via the supplied Torx screw. Does the tool provide internal coolant supply? Yes, the KE32TM model features an internal coolant channel routed to the cutting zone to aid cooling and chip evacuation. Which shank diameter is intended for toolholder selection? This bar has a 16 mm shank (E16R designation), suitable for compact holders and fixtures that accept 16 mm shanks. Is the cutting direction right or left? The unit is configured for right‑hand cutting as specified in the product data. What is the construction material of the bar? The body is manufactured from solid carbide to provide stiffness and wear resistance for stable machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution with a 20 mm diameter, 150 mm overall length and secure Torx clamping for consistent internal boring — order directly via Metav Werkzeuge or contact the consultants for tailored advice. 20 mm Boring Bar K147TM (for DC-- 11T3 Indexable Inserts) — Teknik Makina The 20 mm boring bar K147TM is a precision toolholder designed for internal boring with DC-- 11T3 indexable inserts, ideal for CNC turning and machining centres requiring secure, repeatable insert clamping 20 mm diameter for stable cutting 150 mm overall length for deep boring Compatible with DC-- 11T3 indexable inserts Torx T15 screw and M3.5×8.5 fastening Precision and stability for reliable internal machining The solid geometry of this toolholder provides stable cutting and reduced vibration during internal operations. With a 20 mm diameter and shank 16 mm, the bar is balanced to maintain concentricity and minimise runout when mounted in chucks or collets. The ISO designation S16M denotes the shank form and ensures consistent fit-up in standard holders. The cutting angle of 107.5° and right-hand cutting direction translate into predictable chip flow and cutting forces, which supports higher feed rates and extended insert life while keeping cycle times economical. Engineered for quick insert changes and secure clamping Changeover speed is a decisive factor in productive batch work; the Torx T15 drive and M3.5×8.5 fastening screw deliver repeatable torque and fast insert replacement. The clamping head 11 mm width and 30 mm cutting height are configured to accept the DC-- 11T3 family securely, reducing the need for retightening and lowering downtime. Clear mechanical interfaces and standardised fastenings mean less variability at the toolpost and simpler maintenance routines for workshop technicians, supporting steady throughput and reduced setup times. Seamless integration into CNC workflows and dependable handling The 150 mm overall length provides reach for deeper bores while the compact mass (0.315 kg) helps to limit tool overhang effects and maintain tool life. Labelled as K147TM, this toolholder is ready for insertion into established turning cycles and can be combined with standard indexable inserts to achieve cost-efficient operations. The right-hand cut orientation and measured geometry enable predictable behaviour under load, which simplifies CAM programming and contributes to reliable production output across small to medium series. Contact Metav Werkzeuge for an exact comparison with existing tooling and to secure swift delivery of the Teknik Makina K147TM boring bar from our Emmerich warehouse — technical advisors are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: K147TM Manufacturer: Teknik Makina Label: 20mm Bohrstange DC-- 11T3 L150mm ECLASS: 21180806 ISO designation: S16M Facts Diameter: 20 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 30 mm Clamping head width: 11 mm Weight: 0.315 kg Cutting angle: 107.5° Cutting direction: right Torx key: T15 Torx screw: M3.5×8.5 Special features Compatible with DC-- 11T3 indexable inserts Standardised Torx clamping for repeatable torque Designed for CNC internal boring applications ISO S16M shank form FAQ What insert type does this boring bar accept? The K147TM boring bar is designed for DC-- 11T3 indexable inserts, ensuring straightforward insert selection and interchangeability. What are the key dimensions for tool planning? Key measurements are 20 mm diameter, 150 mm overall length and a 16 mm shank; these figures guide fixture and holder selection for the Teknik Makina K147TM. How is the insert fastened and which tool is needed? Inserts are secured with a Torx screw (M3.5×8.5) tightened using a Torx T15 key for consistent clamping force on the boring bar. Is the cutting direction specified? The toolholder is configured for a right-hand cutting direction and a 107.5° cutting angle to match standard right-handed turning cycles. Can this bar be used in automated tool magazines? The standardised S16M shank form and compact weight of 0.315 kg make the K147TM suitable for many tool magazines and automatic changer setups when holder compatibility is met. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of internal coolant, solid carbide construction and compatibility with common DCMT 0702 inserts to maintain steady machining performance and reduced tool-change frequency. Order the boring bar directly via Metav Werkzeuge or consult our specialists for application advice. KE52TM Boring bar SDQC with internal coolant, solid carbide (Teknik Makina) The KE52TM is a right-hand SDQC boring bar with internal coolant, suited for precision finishing and medium-duty boring using DCMT 0702 indexable inserts. Internal coolant for improved chip evacuation Solid carbide: high stiffness and accuracy Compatible with DCMT 0702 indexable inserts 16 mm shank for secure clamping Stable boring performance through rigid solid-carbide design The solid-carbide construction delivers a rigid, vibration-resistant tool body that enhances bore quality and repeatability. With a 20 mm working diameter and a 11 mm cutting height, the bar provides a stable cutting platform for finishing and semi-finishing operations. The monolithic carbide body reduces deflection compared with brazed holders, so dimensional scatter is lowered and process control becomes more predictable — a clear advantage for shops aiming to reduce rework and scrap rates. Consistent cooling and chip control for longer tool life Integrated internal coolant channels direct cutting fluid to the insert seat, improving chip evacuation and cooling at the cutting edge. This targeted coolant supply helps maintain edge integrity and surface finish when using DCMT 0702 inserts, extending indexable insert life and reducing downtime for insert changes. For operations where coolant-fed machining is standard, this feature supports consistent cycle times and fewer interruptions for manual chip clearing. Easy mounting and secure clamping for efficient workflows Fitting and clamping are straightforward: the bar uses a 16 mm shank for compact toolholders and secures inserts with an M2.5×5.5 screw operated by a T8 Torx key, ensuring repeatable seating and quick maintenance. The ISO designation E16R SDQCR 07 identifies the geometry for toolroom ordering and set-up, while the modest 0.2 kg weight makes handling simple during tool changes. The right-hand cutting direction matches standard turning toolpaths and reduces setup complexity in conventional lathe configurations. For tailored application advice or to order the KE52TM from Metav Werkzeuge’s Emmerich stock, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge is ready to assist with selection and delivery. Technical data Article number: KE52TM Manufacturer: Teknik Makina ISO designation: E16R SDQCR 07 Material: Solid carbide Compatible insert: DCMT 0702 Core measurements Diameter: 20 mm Overall length: 200 mm Shank diameter: 16 mm Cutting height: 11 mm Weight: 0.2 kg Special features Internal coolant: yes Cutting direction: right-hand Torx key: T8 Torx screw: M2.5×5.5 FAQ What insert type does this boring bar accept? The KE52TM accepts DCMT 0702 indexable inserts; the toolholder geometry is matched to that insert size for stable seating and controlled chip flow. Is the KE52TM suitable for coolant-fed machining? Yes. The boring bar features internal coolant channels designed to direct fluid to the cutting edge, improving chip evacuation and tool life in coolant-fed processes. What material is the bar made from? The bar is manufactured from solid carbide, offering high rigidity and resistance to deflection during boring operations. What are the main dimensions to check before fitting? Key dimensions are a 20 mm working diameter, 200 mm overall length and a 16 mm shank; verify these against the toolholder and turret capacity prior to mounting. Does the KE52TM require a special screw or key for insert clamping? Insert clamping uses an M2.5×5.5 screw and a T8 Torx key for secure, repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of solid carbide construction, internal coolant and precise insert compatibility to ensure stable machining and reduced tool changes; order the KE33TM directly via Metav Werkzeuge or request consultancy for application guidance. Bohrstange KE33TM – SDUC boring bar with internal coolant, solid carbide (Teknik Makina) A Bohrstange SDUC with internal coolant designed for right-hand turning and boring operations, compatible with DCMT 11T3 indexable inserts for precision internal machining. Internal coolant supply for improved cooling Solid carbide body for high rigidity Compatible with DCMT 11T3 indexable inserts Shank diameter Ø 16 mm, diameter 20 mm Consistent bore quality through controlled coolant and chip flow The KE33TM combines an integrated internal coolant channel with a compact geometry to maintain stable cutting temperatures and aid chip evacuation. This engineers a more consistent bore surface and reduces thermal distortion during extended cycles. Built for right-hand operations, the toolholder supports a measured approach to feed and speed, which helps preserve insert life and maintain repeatable tolerances in serial machining. The ISO designation E16R SDUCR 11 simplifies ordering and ensures compatibility with established toolholder systems. Rigidity and material for repeatable accuracy Constructed from solid carbide, the bar offers the stiffness required to minimise vibration and deliver repeatable results in small- to medium-diameter internal machining. The combination of cutting height 11 mm and compact shank provides secure support for the insert, improving surface finish while allowing controlled metal removal rates. With an overall length of 200 mm and a nominal diameter of 20 mm, the design balances reach and stability, making it suitable for workshop CNC lathes and precision boring fixtures where stiffness directly translates into part quality. Fast serviceability and insert compatibility to reduce downtime Designed to accept DCMT 11T3 inserts, the KE33TM uses a standard clamp and Torx fastening system for quick indexable insert changes; the supplied Torx is T15 and the clamping screw specification is M3.5x8.5, which supports straightforward maintenance and repeatability of insert seating. The shank Ø 16 mm mounting and right-hand cutting orientation match common toolholders, simplifying integration into existing setups. Lightweight at 0.5 kg, the tool is easy to handle during setup while remaining robust in cut. For tailored technical advice or to secure the KE33TM SDUC boring bar from Teknik Makina, contact Metav Werkzeuge in Emmerich for prompt product support and reliable supply Technical data Article number: KE33TM Manufacturer: Teknik Makina Designation EN: SDUC with Coolant ISO designation: E16R SDUCR 11 Numbers / Core technical data Diameter: 20 mm Overall length: 200 mm Shank diameter (Ø): 16 mm Cutting height: 11 mm Weight: 0.5 kg Design / Special features Material: solid carbide Internal coolant: yes Cutting direction: right-hand For indexable inserts: DCMT 11T3 Torx key: T15 Clamping screw: M3.5x8.5 FAQ Which inserts are compatible with this boring bar? The KE33TM boring bar is specified for DCMT 11T3 indexable inserts, enabling simple integration with commonly used grades and geometries for internal turning. Can the bar be used with through-tool coolant? Yes, the KE33TM features internal coolant supply, designed to direct coolant towards the cutting edge for improved cooling and chip control. What are the mounting and shank dimensions for toolholder selection? The bar has a shank diameter of 16 mm and an overall diameter of 20 mm, consistent with compact toolholder systems for internal machining. Is the cutting direction fixed or reversible? The KE33TM is manufactured for right-hand cutting; select matching machine spindle and holder orientation for correct chip flow. How does the solid carbide construction affect performance? A solid carbide body increases rigidity and reduces vibration, improving surface finish and repeatability in bore operations while enabling stable cutting parameters. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of a 20 mm cutting diameter and an S16M shank Ø 16 mm for stable, repeatable internal turning operations, paired with left‑hand geometry for specific toolpaths; order the boring bar directly via Metav Werkzeuge or consult our specialists for application support. Boring bar for DC-- 0702 indexable inserts — 20 mm, left‑hand (Teknik Makina) Boring bar engineered for precision internal turning with DC-- 0702 indexable inserts, suited to left‑hand machining in production and workshop environments. Compatible with DC-- 0702 indexable inserts 20 mm cutting diameter S16M shank Ø 16 mm Left‑hand cutting direction Rigidity and repeatability for series bores The combination of a 20 mm cutting diameter and an S16M shank gives measurable stiffness at the cutting edge, reducing vibration and improving bore roundness in serial production. With a 150 mm overall length, the tool provides a controlled reach for a range of internal diameters while maintaining stability. These characteristics cut set‑up time and scrap rates, delivering consistent cycle times across batches. Geometry tuned for efficient left‑hand machining Designed for left‑hand cutting, the tool works with standard DC-- 0702 indexable inserts to produce predictable chip flow and surface finish. The 107.5° cutting angle supports secure engagement in bore walls, which helps to manage cutting forces and extend insert life. This geometry is particularly effective where opposing toolpaths or fixture arrangements demand left‑hand orientation. Secure clamping and straightforward servicing Serviceability and secure assembly are supported by the Torx T8 interface and M2.5x5.5 fixing screw, enabling precise repeatable clamping of the insert holder. The 11 mm clamping head width gives a clear seating for the insert pocket, simplifying index changes and reducing downtime during maintenance. Together, these features deliver reliable fixation and predictable performance in daily workshop use. Workshop compatibility and practical handling Lightweight at 0.289 kg and marked as K273TM, the tool is easy to handle during set‑up yet engineered for industrial use. Its dimensions and ISO designation suit common toolholders and mounting systems, allowing flexible integration into existing tool magazines and fixtures. The design supports efficient changeovers and steady machining conditions for both one‑off jobs and longer production runs. For tailored advice on the Teknik Makina boring bar and fast supply from Metav Werkzeuge in Emmerich, contact our consultants via info@metav-werkzeuge.com or call +49 2822 7131930 for a precise recommendation. Technical data SKU: K273TM Product: Boring bar for DC-- 0702 indexable inserts Manufacturer: Teknik Makina Facts Cutting diameter: 20 mm Shank diameter: 16 mm (S16M) Overall length: 150 mm Cutting height: 30 mm Weight: 0.289 kg Cutting angle: 107.5° Clamping head width: 11 mm Special features Compatible with DC-- 0702 indexable inserts Left‑hand cutting direction Torx T8 fixing interface Torx screw M2.5x5.5 Tool type: Boring bar FAQ What insert family fits this boring bar? The boring bar accepts DC-- 0702 indexable inserts; the geometry and clamping pocket are designed for this insert family for predictable seating and performance. Is the tool suitable for left‑hand machining only? Yes, this tool is configured for left‑hand cutting and is optimised for operations that require left‑hand toolpaths with the DC-- 0702 inserts. Which shank diameter is required for the holder? The tool uses an S16M shank with a 16 mm shaft diameter, compatible with holders designed for S16M shanks; refer to the holder specifications for clearance. How is the insert secured in the head? The insert pocket is secured using a Torx T8 interface with an M2.5x5.5 fixing screw, allowing repeatable clamping and straightforward insert changes on the K273TM boring bar. What length and handling characteristics does the bar offer? With a 150 mm overall length and a weight of 0.289 kg, the boring bar balances reach and handling for workshop set‑up while maintaining rigidity for accurate bores. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact boring solution that combines a 16 mm shaft for secure clamping, a 180 mm overall length for extended reach and compatibility with standard 16 IR indexable inserts — order directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. STI for IR/ER Indexable Inserts (S16Q STIR) — boring bar with 16 mm shaft, 180 mm length — Teknik Cutting Tools STI for IR/ER Indexable Inserts is a right-hand boring bar designed for internal turning with indexable inserts; suitable for workshop and light industrial CNC applications. ISO designation S16Q STIR 16 mm shaft for stable clamping Compatible with 16 IR indexable inserts 180 mm overall length for extended reach Consistent cutting performance for repeatable results The boring bar delivers stable chip removal and predictable tool life through its right-hand cutting orientation and compatibility with standard 16 IR inserts. By accepting widely used insert sizes, the tool reduces setup variations and simplifies inventory management. The result is a measurable improvement in cycle-time consistency and fewer interruptions for tool changes, which supports higher throughput on smaller bores and internal turning operations. Rigidity and balance to reduce vibration and improve surface finish A shaft diameter of 16 mm combined with a nominal component diameter of 20 mm gives the tool a compact but rigid profile. This rigidity helps to reduce chatter and improves surface finish during finishing passes. The 40 mm cutting height ensures the insert is positioned for secure clamping and effective cutting engagement, so the machining process benefits from enhanced stability and repeatable part quality. Straightforward integration with existing clamping systems The boring bar is designed to fit clamping holders specified as IR16, allowing fast installation into common tool posts and holders. The ISO marking S16Q STIR simplifies identification in toolrooms and allows rapid matching to compatible indexable inserts for internal turning. With a modest weight of 0.286 kg and an overall length of 180 mm, the tool is suitable for operations where reach and balance are important without unnecessary bulk. Practical applications and handling advice Ideal for internal machining tasks where indexable inserts provide cost-effective cutting, this boring bar performs well across typical workshop materials when used with appropriate inserts. The combination of standard insert format and compact geometry makes it a practical choice for small- to medium-diameter bores on lathes and turning centres. Regular inspection of insert seating and clamping screws will maintain cutting accuracy and extend service intervals. For reliable supply and technical guidance on the STI boring bar from Teknik Cutting Tools, contact Metav Werkzeuge — technical advice and next-day delivery options available from our Emmerich location Technical data Article number: K352TM ISO designation: S16Q STIR Brand: Teknik Makina Data Shaft diameter: 16 mm Diameter: 20 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.286 kg Compatible insert size: 16 IR Cutting direction: right Special features For STI for IR/ER Indexable Inserts Fits clamping holder IR16 Right-hand cutting orientation Suitable for indexable insert internal turning FAQ What insert format does this boring bar accept? The boring bar accepts 16 IR indexable inserts; the tool (STI for IR/ER Indexable Inserts, SKU K352TM) is specified to work with that standard format for quick insert changes. Is the tool suitable for right-hand turning only? Yes, the S16Q STIR is configured for right-hand cutting, so it is intended for applications that require that orientation. Which clamping holder type matches this boring bar? The bar is compatible with holders designated IR16, ensuring straightforward mounting in holders designed for that interface. How long is the boring bar and what reach does it provide? The overall length is 180 mm, providing extended reach for internal machining while retaining a compact, rigid profile. Can the tool be used on small lathes and turning centres? Yes, the compact 16 mm shaft and modest weight (0.286 kg) make the tool appropriate for small to medium-size lathes and turning centres when paired with the correct inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a precise, compact turning solution that combines a 45° cutting angle, compatibility with SNMG 1204 indexable inserts and a sturdy 125 mm overall length for stable machining. Order the clamping holder directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. Clamping holder DSSNR 2020 — right‑hand, 45° (Teknik Makina) A robust clamping holder designed for turning operations with SNMG 1204 indexable inserts, optimised for right‑hand cutting at a 45° approach angle. DSSNR 2020 toolholder for SNMG 1204 inserts 45° cutting angle for reduced interference Right‑hand orientation for conventional turning 125 mm overall length, robust build Improved machining stability through precise geometry The holder’s 45° cutting angle and compact geometry deliver a reliable cutting approach that reduces tool projection and vibration. Fitted for SNMG 1204 indexable inserts, the unit provides a controlled cutting engagement that helps maintain surface finish while extending insert life. The DSSNR 2020 configuration is aimed at turning and facing tasks where a lowered nose radius and predictable chip flow are required; the right‑hand orientation supports conventional lathe setups. With an overall length of 125 mm and a mass of approximately 0.44 kg, the design balances rigidity with manageable toolholder mass for improved spindle dynamics. Ease of setup and compatibility with standard tooling Set‑up is straightforward thanks to the ISO designation DSSNR 2020 and the accepted insert form SNMG 1204, which simplifies procurement and inventory. The toolholder accepts the common shank reference K12, ensuring secure seating in compatible boring bars and turret pockets. The right‑hand orientation and a clear cutting head width of 25 mm make it suitable for many shop layouts and insert geometries. Because the holder is designed for indexable inserts, maintenance is reduced to periodic insert changes rather than regrinding, which increases machine uptime and lowers ongoing tooling costs. Built for workshop durability and repeatable results Manufactured to withstand everyday shop demands, the holder’s 20 mm height and 20 mm body width offer a balanced footprint that resists bending under load while remaining compact for close‑tolerance work. The specified cutting height of 35 mm ensures correct insert positioning for consistent axial engagement. This robustness translates into process reliability: components are held steadily during interrupted cuts and varied feed conditions, reducing the risk of chatter and rework. As a toolroom or production solution, the clamping holder provides the predictable performance required for repeatable batch production. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina clamping holder D210TM and guidance on integrating it into the production workflow Technical data Article number: D210TM Manufacturer: Teknik Makina Article name EN: DSSNR for SNMG Indexable Inserts ISO designation: DSSNR 2020 Facts Overall length: 125 mm Holder height: 20 mm Holder width: 20 mm Cutting head width: 25 mm Cutting height: 35 mm Weight: 0.44 kg Cutting angle: 45° Cutting direction: right Compatible inserts: SNMG 1204 Special features Right‑hand turning holder K12 shank designation Designed for indexable SNMG inserts Robust construction for workshop use FAQ Which inserts fit this holder? The holder accepts SNMG 1204 indexable inserts; the DSSNR 2020 geometry is matched to that insert form for secure clamping and correct rake alignment. Is the holder right‑ or left‑hand? This model is a right‑hand turning holder, specified for conventional right‑hand cutting operations. What are the key dimensions to check for turret mounting? Relevant dimensions include the overall length 125 mm, body height 20 mm and body width 20 mm; these ensure compatibility with common turret pockets and boring bar setups. How heavy is the toolholder and how does that affect machining? The mass is 0.44 kg, which provides a balance between rigidity and reduced centrifugal load, aiding stable turning and improved surface finish. What is the ISO designation and why is it important? The DSSNR 2020 designation identifies the toolholder geometry and insert orientation, facilitating compatibility checks and simplifying procurement for standard turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, right‑hand turning solution that pairs reliable clamping with a 95° cutting angle and compatibility with standard WN-- 0804 inserts; order directly via Metav Werkzeuge or ask our consultants for application advice. Klemmhalter DWLN (DWLNR 2020) — Right‑hand toolholder for WN-- 0804 inserts by Teknik Makina The Klemmhalter is a right‑hand turning toolholder designed for DWLN indexable inserts, optimised for precise external turning and profiling in workshop and industrial lathes. Right‑hand orientation for standard turning Accepts WN-- 0804 indexable inserts 95° approach angle for accurate profiling 125 mm overall length for stable overhang Stable geometry for consistent surface quality The holder’s DWLNR 2020 form and 95° cutting angle create a stable cutting geometry that reduces chatter and improves surface finish when used with compatible inserts. With a 32 mm cutting height and a 125 mm overall length, the design balances reach and rigidity so that repetitive external turning operations remain predictable. The combination of defined dimensions and a standard ISO designation simplifies spindle set‑up and tool library management in production environments. Predictable handling and quick integration into production Weight and dimensions are tuned for practical workshop use: a mass of 0.442 kg, a 25 mm head width and 20 mm body width deliver a compact footprint while maintaining sufficient mass to dampen vibration. The right‑hand cutting direction and the match to WN-- 0804 indexable inserts mean the holder integrates seamlessly with established tooling systems, minimising retooling time. For process planners this translates into reproducible cycle times and lower setup overhead. Practical applications and durable compatibility Designed for turning tasks requiring a defined approach angle and a secure clamp for indexable inserts, the holder is suitable for finishing and medium‑machining external profiles where a standard insert form is preferred. The toolholder’s K08 shank reference and ISO label support interoperability across toolposts and accessory ranges, reducing logistical complexity. Consistent manufacture and fitment ensure long‑term compatibility with stocked insert sizes and common clamping screws. For precise turning operations choose the Teknik Makina DWLNR 2020 toolholder; contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich. Technical Data Article number: D176TM Manufacturer: Teknik Makina Type: DWLN for WN-- Indexable Inserts ISO designation: DWLNR 2020 Cutting direction: Right SKU: D176TM Facts Overall length: 125 mm Cutting height: 32 mm Head width: 25 mm Holder width: 20 mm Holder height: 20 mm Weight: 0.442 kg Cutting angle: 95° Special features Compatible inserts: WN-- 0804 Right‑hand cutting direction Tool shank reference: K08 Designed for DWLN indexable inserts FAQ What insert type does the holder accept? The holder is made for WN-- 0804 indexable inserts and the DWLN insert family. Is this a right‑hand or left‑hand toolholder? This toolholder is a right‑hand version, intended for standard right‑hand external turning. What is the ISO designation and why is it relevant? The ISO designation DWLNR 2020 identifies the holder form and shank size, aiding compatibility checks with toolposts and insert formats. What are the critical dimensions to consider for set‑up? Key dimensions are 125 mm overall length, 32 mm cutting height and a 25 mm head width; these determine reach and clearance in the lathe setup. Can the holder be used for heavy roughing cuts? The holder is designed for stable external turning and profiling; suitability for heavy roughing depends on machine rigidity, insert grade and cutting parameters rather than the holder alone. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Optimise internal boring with a left‑hand, solid carbide bar that combines internal coolant and compatibility with DCMT 11T3 indexable inserts; the robust 16 mm shank and 200 mm overall length ensure stable set‑up and repeatable bore finishes — order the boring bar directly via Metav Werkzeuge or ask our consultants if needed Boring bar SDQC with Coolant — solid carbide, internal coolant, left‑hand Boring bar SDQC with Coolant is a left‑hand indexable boring bar designed for precision internal turning and reliable chip control in machine lathe and CNC applications Internal coolant for improved chip evacuation Solid carbide body for high rigidity Compatible with DCMT 11T3 indexable inserts 16 mm shank; 200 mm overall length Cooler cutting, longer tool life through internal coolant The integration of internal coolant directly to the cutting zone lowers cutting temperatures and assists chip evacuation, which translates into longer insert life and more consistent bore surfaces. By directing fluid to the interface between insert and workpiece, the tool reduces thermal expansion and minimises the risk of surface distress; the result is improved process stability and fewer reworks. The combination of coolant feed and a solid carbide body keeps the cutting edge cooler and stiffer, offering measurable gains in cycle time and tool-change intervals for repetitive production runs. Quick mounting and secure clamping for less downtime Designed with a 16 mm shank and an ISO designation of E16R SDQCL 11, the bar fits standard 16 mm toolholders and provides a compact footprint in the turret or tool post. Insert retention uses a T15 Torx key and an M3.5×8.5 clamping screw, enabling straightforward insert replacement and secure fastening that resists vibration. The bar’s nominal diameter of 20 mm and overall length of 200 mm give a well‑balanced reach for many internal bores while the modest weight (0.5 kg) reduces centrifugal load during high‑speed turning. Together these features shorten set‑up time and maintain concentricity throughout the cut. Left‑hand geometry and insert compatibility for precise bores Left‑hand cutting direction is prescribed for specific turning orientations and can be advantageous in fixtures or multi‑spindle arrangements where the turning vector requires it. The bar accepts DCMT 11T3 indexable inserts, a common triangular insert size that offers multiple cutting edges per insert and economical indexability. The cutting height 11 mm matches the insert geometry to ensure a correct, repeatable cutting plane without the need for additional shims. This setup supports high‑precision internal turning tasks where repeatability and surface integrity are priority production metrics. For technical specification checks, ordering details or to discuss integration of the Teknik Makina SDQC boring bar with internal coolant into an existing cell, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request consultation and supply options Technical Data Article number: KE63TM Manufacturer: Teknik Makina ISO designation: E16R SDQCL 11 Insert type: DCMT 11T3 Torx key: T15 Torx screw: M3.5x8.5 Core technical data Shank diameter: 16 mm Diameter: 20 mm Overall length: 200 mm Weight: 0.5 kg Cutting height: 11 mm Special features Internal coolant Left‑hand cutting direction Solid carbide construction Compatible with DCMT 11T3 indexable inserts FAQ Which inserts are compatible with this boring bar? The Teknik Makina Boring bar SDQC with Coolant is designed for DCMT 11T3 indexable inserts, enabling multiple re‑indexes per carbide insert for economical operation. How does the internal coolant improve machining? Internal coolant supplied through the bar directly to the cutting zone improves chip evacuation and reduces cutting temperature, which in turn prolongs insert life and stabilises bore finish when using the SDQC with coolant. What are the key mounting dimensions for toolholder selection? Mounting requires a 16 mm shank holder; the bar’s ISO designation E16R SDQCL 11 and 200 mm overall length define the clearance and reach for toolpost or turret installation. Is the cutting direction left or right handed? This tool is manufactured with a left‑hand cutting direction, suitable for operations and setups that require a left‑hand geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the rigidity of solid carbide, the precision of internal coolant delivery and standard insert compatibility for stable bore finishing; for straightforward integration into existing holders, contact Metav Werkzeuge for ordering or technical advice. Boring bar SDQC with Coolant — Solid carbide boring bar with internal coolant, Ø 20 mm | Teknik Makina The Boring bar SDQC with Coolant is a precision solid carbide boring bar designed for coolant-fed internal chip evacuation during turning operations, suitable for use with DCMT 11T3 indexable inserts in standard toolholders. Solid carbide construction for stiffness and accuracy Internal coolant for improved chip control Compatible with DCMT 11T3 indexable inserts Ø 20 mm cutting diameter, 200 mm overall length Improved chip control and surface quality through internal coolant The integrated internal coolant channel delivers cutting fluid directly to the cutting zone, which significantly improves chip control and assists in maintaining consistent cutting temperatures. This targeted cooling reduces built-up edge formation and contributes to a finer surface finish, meaning fewer rework cycles and more predictable component tolerances. The coolant feed is particularly advantageous in deep boring where external flushing is limited, and the feature is engineered to work with standard coolant pressures found in industrial lathes. Quick tool change and stable seating with standard insert fit Compatibility with DCMT 11T3 indexable inserts and the ISO designation E16R SDQCR 11 ensures rapid replacement and familiar geometry for workshop staff, reducing setup time. The bar’s 16 mm shank diameter promotes secure clamping in typical holders, while the 11 mm cutting height matches common insert seatings, allowing straightforward integration into established tool sets. As a result, machining cycles can be resumed with minimal adjustment and consistent repeatability. Robust design for demanding turning cycles Manufactured from solid carbide, the tool offers the rigidity required for bore accuracy and resistance to deflection during interrupted cuts. With a cutting diameter of Ø 20 mm and an overall length of 200 mm, the tool balances reach with stiffness to support stable operation at moderate overhangs. The combination of material and geometry is intended to extend tool life under routine operating conditions, lowering the frequency of tool changes and supporting continuous production runs. Secure clamping and reliable assembly for repeatable performance Assembly and clamp retention are engineered for repeatability: the insert is fastened with a Torx T15 drive using an M3.5x8.5 screw, enabling controlled torque application for consistent seating. The bar’s ISO marking and clear mechanical interfaces simplify inventory management and reduce the chance of incorrect assembly. These details translate into dependable fixturing on the machine and predictable performance across multiple operators and shifts. Discuss the application requirements with Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to request technical advice and a quotation for the Teknik Makina SDQC boring bar Technical data Article number: KE53TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina SKU: KE53TM Facts Cutting diameter: 20 mm Overall length: 200 mm Shank diameter (holder): 16 mm Cutting height: 11 mm Weight: 0.5 kg eClass: 21180806 Special features Material: solid carbide Internal coolant: yes Compatible inserts: DCMT 11T3 ISO designation: E16R SDQCR 11 Cutting direction: right-hand Torx key: T15 Torx screw: M3.5x8.5 Files: 62de7ec4a9cff922f4703d41, 62de7ddd148ec6b71020ff6e FAQ What insert type is required for the boring bar? The bar accepts DCMT 11T3 indexable inserts; these inserts match the bar’s geometry and the ISO designation E16R SDQCR 11 for secure seating and consistent cutting. Can the tool be used with standard holders? Yes, the bar’s 16 mm shank diameter is intended for common holders, allowing direct use in many standard clamping systems. Does the bar support internal coolant supply? Internal coolant is provided through the bar’s built-in channel, enabling coolant delivery directly to the cutting edge for improved chip control. What is the cutting direction of the tool? The tool is configured for a right-hand cutting direction, matching typical lathe setups for standard turning operations. Which manufacturer and article number should be referenced when ordering? Reference Teknik Makina and article number KE53TM for accurate ordering and to ensure the correct SDQC boring bar is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com