Gibt es einen Hahn und Kolb Online Shop?

Benefit from a rigid, solid-carbide design with built-in internal coolant and compatibility with DCMT 0702 inserts for reliable boring performance; order the KE62TM via Metav Werkzeuge or contact our consultants for machining advice. Boring bar KE62TM — SDQC with internal coolant, solid carbide (Teknik Makina) A Boring bar SDQC with Coolant designed for precision indexable-insert boring in CNC turning and machining centres Solid carbide construction for high rigidity Internal coolant for optimised chip control Compatible with DCMT 0702 indexable inserts Ø20 mm diameter, 200 mm overall length Precise bore quality through rigid construction The solid-carbide body delivers a stiff, vibration-resistant platform that stabilises the cutting edge for repeatable bore geometry. Thanks to the E16R SDQCL 07 ISO designation and a cutting height of 11 mm, the tool is tailored for productive insert boring where dimensional consistency matters. The combination of material and geometry reduces chatter and contributes to extended insert life, helping to secure tighter tolerances on component bores without compromising cycle time. Controlled cooling and chip evacuation for longer tool life Internal coolant is integrated to supply cutting fluid directly to the cutting zone, which significantly reduces thermal load and improves chip evacuation when machining longer bores. With a 200 mm overall length and a shank diameter of 16 mm, the tool is optimised for deep-reach operations while maintaining coolant flow. Left-hand cutting orientation assists specific toolpaths on CNC lathes and turning centres, and the coolant delivery reduces rework risk by promoting stable cutting conditions and improved surface finish. Fast insert changes and practical maintenance The boring bar accepts DCMT 0702 indexable inserts and uses a Torx fastening system (Torx T8, screw M2.5x5.5) for secure, repeatable clamping and straightforward replacement. This maintenance-friendly design minimises downtime during insert changes and supports efficient workshop routines. At approximately 0.2 kg, the tool is lightweight to handle yet robust in use, making it convenient for both in‑machine adjustments and tooling setup. Built for CNC turning and precision finishing Engineered for indexable-insert boring tasks, this SDQC style tool suits applications that require precise internal profiling and finishing passes on production and jobbing work. The Ø20 mm body diameter offers a balance between rigidity and access, making the tool a practical choice for small-batch production and continuous machining environments. Manufactured by Teknik Makina, the design focuses on repeatability, straightforward interchangeability of inserts and stable process behaviour to support consistent output quality. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored machining recommendations and to secure the KE62TM boring bar from Teknik Makina with internal coolant. Technical data Article number: KE62TM ISO designation: E16R SDQCL 07 Manufacturer: Teknik Makina SKU: KE62TM Core specifications Diameter: 20 mm Overall length: 200 mm Shank diameter: 16 mm Cutting height: 11 mm Weight: 0.2 kg Features & compatibility Material: solid carbide Internal coolant: yes Compatible inserts: DCMT 0702 Cutting direction: left Torx key: T8 Torx screw: M2.5x5.5 FAQ What inserts fit this boring bar? The KE62TM boring bar is compatible with DCMT 0702 indexable inserts; the clamping uses a Torx T8 fastener and M2.5x5.5 screw for secure mounting. Does the tool provide internal coolant supply? Yes — the SDQC with Coolant design integrates internal coolant to the cutting zone, improving chip evacuation and reducing thermal wear during extended boring cycles. Which machines is the KE62TM suitable for? This boring bar is intended for CNC turning and machining centres where indexable‑insert boring is required; the 16 mm shank suits toolholders designed for SDQC‑style bars. Is the KE62TM left‑hand cutting? The KE62TM is specified for left‑hand cutting, compatible with corresponding toolholder orientations and machining programmes. How does the solid carbide construction benefit production? The solid carbide body increases rigidity and reduces vibration, which helps maintain bore tolerances and extends insert life under continuous machining conditions. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of secure insert clamping, internal coolant and a compact 180 mm length to keep cycle times low and set-up fast; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar A16Q for VBMT 1103 – 20 mm, internal coolant (Teknik Makina) A boring bar for VBMT 1103 indexable inserts, optimised for right-hand turning with internal coolant for improved chip control and insert life. A16Q ISO designation for standard fit 20 mm diameter with 16 mm shank Internal coolant for chip evacuation Compatible with VBMT 1103 inserts Precision and compatibility for modern turning centres The holder follows the A16Q specification and is designed specifically for VBMT 1103 indexable inserts, providing consistent seating and repeatable positioning. With a 20 mm tool diameter and 16 mm shank, the component offers a compact footprint while maintaining sufficient rigidity for typical workshop and light industrial turning tasks. The 11 mm clamp width at the cutting head secures the insert reliably, reducing the need for frequent re‑indexing and therefore shortening total set‑up time. As a result, operators benefit from increased process stability and predictable machining results when integrating this tool into standard tool posts and turret systems. Cooling and geometry that improve cutting stability and finish Built‑in internal coolant channels focus coolant directly at the cutting edge to assist in chip evacuation and thermal management; this delivers measurable advantages in surface finish and insert life for continuous operations. The tool’s 107.5° approach angle moderates cutting forces and helps to distribute load across the insert, while the right‑hand cutting orientation suits standard lathe programming. Fastening is secured with a T8 Torx key and M2.5x6.5 Torx screw for a robust clamp that resists loosening under vibration. Together, these design elements enable higher effective cutting parameters without compromising repeatability, translating into better throughput and fewer unscheduled tool changes. Compact design for efficient workflow and straightforward maintenance At an overall length of 180 mm and a mass of 0.276 kg, this tool balances accessibility in confined setups with enough reach for internal and external boring tasks. The moderate weight reduces inertial loading during rapid indexing, supporting smoother cycle execution. The SKU KA216TM identifies the configuration with inner cooling and VBMT 1103 compatibility, simplifying spare‑parts handling and reorders. The construction supports routine maintenance: coolant channels remain accessible for cleaning and the standard Torx fastening allows quick insert changes with common workshop tools. For operations seeking dependable short‑run flexibility and easy integration into existing inventories, this tool offers a concise engineering solution. For reliable, workshop-ready performance from Teknik Cutting Tools, request the KA216TM boring bar through Metav Werkzeuge for tailored specification advice and prompt supply from Emmerich. Technical data SKU: KA216TM ISO designation: A16Q Label: 20 mm boring bar VBMT 1103 L180 mm with internal coolant Manufacturer: Teknik Cutting Tools Dimensions & core data Diameter: 20 mm Overall length: 180 mm Shank diameter: 16 mm Cutting height: 30 mm Clamp head width: 11 mm Weight: 0.276 kg Cutting angle: 107.5° Cutting direction: right Design & features Internal coolant For VBMT 1103 indexable inserts Torx key: T8 Torx screw: M2.5x6.5 ECLASS: 21180806 FAQ Which inserts are compatible with this tool? The boring bar is designed for VBMT 1103 indexable inserts; the KA216TM configuration provides the correct clamp geometry and seating for that insert type. Does the tool support internal cooling? Yes — the KA216TM features internal coolant channels that direct fluid to the cutting zone to aid chip evacuation and reduce thermal load on the insert. What shank size is required for mounting? Mounting requires a tool holder or turret capable of accepting a 16 mm shank; the compact shank keeps the overall assembly stable in standard tool posts. How does the cutting angle affect machining? The 107.5° approach angle moderates axial and radial forces, improving load distribution across the insert and helping to achieve consistent surface finish under steady cutting conditions. Is the fastening system easy to service? Yes — insert clamping uses a T8 Torx key and M2.5x6.5 Torx screw, enabling quick insert changes with commonly available workshop tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining cost-effective design, a rigid S16M shank and compatibility with CCMT 0903 indexable inserts, this 20 mm boring bar delivers stable, repeatable internal turning with minimal setup time — order the tool directly via Metav Werkzeuge or consult our specialists if required. 20 mm Boring Bar for CCMT 0903 Indexable Inserts – 150 mm, S16M (Teknik Makina) The 20 mm boring bar is a compact toolholder intended for precision internal turning with CCMT 0903 indexable inserts, offering a secure S16M shank and a short 150 mm overall length for confined setups Compatible with CCMT 0903 indexable inserts Solid S16M shank for secure clamping 20 mm diameter with 150 mm overall length Right-hand 95° cutting geometry High-impact stability and repeatable bore quality The boring bar is engineered to support consistent, low-vibration performance in internal turning tasks. Its S16M shank provides a rigid connection to the machine spindle, which reduces chatter and improves surface finish; this stability is particularly relevant when using CCMT 0903 indexable inserts, as the insert geometry benefits from a firm toolholder. A 20 mm diameter body combined with a 150 mm overall length balances access to internal bores with torsional stiffness, enabling reliable material removal rates and fewer rejected parts. For production environments where cycle-time and repeatability matter, the component's compact design helps maintain throughput without sacrificing precision. Fast insert changes and straightforward upkeep Tool change and maintenance are simplified by standardised fastenings: the clamping screw specified is M3.5x8.5, tightened using a Torx T15 key. This familiar interface allows rapid index changes of CCMT 0903 inserts and straightforward torque application, reducing machine downtime. The toolholder’s right-hand cutting orientation and 95° cutting angle are clear, established parameters that allow workshop planners to predict cutting forces and select compatible inserts or adapt cutting data. The combination of clear mechanical interfaces and documented fastening makes inventory management and staff training more efficient while lowering the risk of incorrect assembly. Compact design tailored to machine-room realities A short overall length and controlled mass make this boring bar well suited to confined setups where tool overhang must be minimised. The product’s klemmhalter scheidkopf width 11 mm (clamping head width) and shaft diameter 16 mm contribute to compatible mounting and allow secure clamping in many common toolposts. With a measured weight of 0.228 kg, the holder introduces minimal centrifugal load at moderate speeds while remaining robust enough for stable cutting. Produced by Teknik Makina, the component is intended as a pragmatic option for workshops and production lines seeking a compact, indexable-insert solution that integrates with standard tooling systems. For procurement or technical advice on the Teknik Cutting Tools 20 mm boring bar (SKU K109TM), contact Metav Werkzeuge in Emmerich to discuss availability, delivery options and compatibility with existing setups Technical data Article number: K109TM Label: 20mm Boring Bar CCMT 0903 L150mm Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 30 mm Weight: 0.228 kg Special features Compatible inserts: CCMT 0903 Shank designation: S16M Cutting direction: right-hand Cutting angle: 95° Clamping head width: 11 mm Torx key: T15 Torx screw: M3.5x8.5 SKU: K109TM FAQ Which inserts fit this boring bar? The K109TM boring bar is designed for CCMT 0903 indexable inserts and accepts those inserts in the standard CCMT 0903 format. What is the shank specification for mounting? Mounting requires a toolholder compatible with an S16M shank; the K109TM uses that shank form for secure clamping. Is the cutting orientation right- or left-hand? This toolholder is configured for right-hand cutting with a 95° cutting geometry. What fastener and key are used for the insert? Insert retention uses an M3.5x8.5 screw tightened with a Torx T15 key. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant and a rigid shank Ø16 mm for reliable chip evacuation and reduced tool deflection; the compatibility with DC-- 0702 indexable inserts keeps running costs low and simplifies maintenance. Order direct via Metav Werkzeuge for fast supply from Emmerich or contact our consultants for application advice. Boring Bar A16M – 20 mm with internal coolant (Teknik Makina) The Boring Bar A16M is a 20 mm precision boring bar for DC-- 0702 indexable inserts, designed for left-hand cutting operations in turning and boring tasks. 20 mm diameter with internal coolant Compatible with DC-- 0702 indexable inserts Left-hand cutting, 93° cutting angle Shank Ø16 mm, overall length 150 mm Consistent hole quality at production speed The compact design with internal coolant provides constant lubrication and improved chip control, which directly reduces thermal distortion and wear. Using a 20 mm diameter tool body together with replaceable DC-- 0702 indexable inserts allows cost-efficient tool management: worn edges are exchanged instead of replacing the whole tool, maintaining cycle times and part tolerances. For production environments this means fewer interruptions and a more predictable process capability. Secure clamping and straightforward maintenance A rigid shank Ø16 mm and a defined 93° cutting angle minimise bending and support accurate machining in tight setups. The clamping system is serviced via a Torx T8 key and the specified M2.5x5.5 screw, enabling quick insert changes and consistent seat pressure. Routine maintenance is simplified by accessible fasteners and standardised spare parts, which shortens downtime and keeps the machining cell productive. Compact design that fits workshop routines With an overall length of 150 mm and a measured clamping head width of 11 mm, this tool suits confined toolposts and shorter overhangs without sacrificing stability. The left-hand cutting orientation is ideal for specific component geometries and machining sequences where reverse-direction cuts are required. Lightweight construction supports easier handling while retaining the necessary stiffness for accurate boring operations. For procurement advice or to confirm compatibility with existing tooling, contact Metav Werkzeuge — fast supply from Emmerich and expert consultation available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: KA257TM Manufacturer: Teknik Makina Product type: Boring bar A16M Core specifications Diameter: 20 mm Shank diameter: 16 mm Overall length: 150 mm Cutting height: 30 mm Cutting angle: 93° Cutting direction: left Clamping head width: 11 mm Weight: 0.246 kg Torx key: T8 Torx screw: M2.5x5.5 Features & compatibility Internal coolant Compatible with DC-- 0702 indexable inserts Left-hand cutting orientation Indexable-insert system for economical reconditioning FAQ Which inserts fit this boring bar? The boring bar A16M from Teknik Makina (SKU KA257TM) accepts DC-- 0702 indexable inserts, ensuring standardised insert geometry and easy replacement. Does the tool provide internal coolant? Yes — the boring bar A16M includes internal coolant to assist chip evacuation and reduce cutting temperatures during prolonged cycles. What is the cutting direction and angle? The tool is specified for left-hand cutting and a 93° cutting angle, applicable for operations that require reverse-direction cuts or specific approach geometries. Which key and screw are required for insert changes? Insert clamping is secured with a Torx T8 key and an M2.5x5.5 Torx screw, as listed for the tool. Will the shank fit standard holders? The shank diameter is 16 mm with an overall length of 150 mm; holders must match these dimensions for secure clamping and optimal rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a solid combination of 20 mm diameter, 16 mm shank and a 150 mm overall length for consistent bore quality and reliable clamping; specify delivery through Metav Werkzeuge or consult Metav's advisors for technical alignment. Boring bar S16M for DC-- 11T3 indexable inserts — Teknik Makina The boring bar S16M is a purpose-designed tool for internal turning with DC-- 11T3 indexable inserts, offering stable rigidity and compatibility for workshop and CNC lathe applications 20 mm diameter for compact bores Compatible with DC-- 11T3 inserts Left-hand cutting orientation 16 mm shank for secure clamping Precision and stability for internal machining The S16M boring bar provides consistent bore geometry through a 20 mm body that balances rigidity and access in confined spaces. A firm 16 mm shank reduces vibration at higher spindle speeds, which translates into improved surface finish and longer insert life. For users unfamiliar with the term, shank diameter refers to the portion clamped in the tool holder; a larger, well-matched shank minimises deflection and helps maintain tolerance chains during production. Secure insert mounting and easy serviceability Compatibility with DC-- 11T3 indexable inserts ensures a widely available range of cutting grades and geometries for different materials. The insert is fixed by a Torx T15 fastening system using an M3.5x8.5 screw, which provides repeatable clamping force and straightforward replacement. This arrangement reduces downtime: individual inserts can be rotated or exchanged without dismantling the entire tool, supporting efficient shop-floor workflows. Optimised for left-hand cutting operations Designed for left-hand cutting, this boring bar suits setups requiring counter-directional tool travel, for example when machining features on certain lathe configurations or when specific chip flow is required. The 107.5° cutting angle is selected to balance cutting forces and edge strength, offering predictable material removal and helping to avoid chatter when paired with an appropriate holder and stable workholding. Practical design for workshop integration With an overall length of L150 mm and a compact mass of 0.312 kg, the tool is easy to handle and integrates well into standard tool inventories. The S16M designation signals the shank interface and assists purchasing and inventory management. For workshops seeking to standardise tooling across machines, this boring bar supports a pragmatic combination of accessibility, repeatability and serviceability. For dependable left-hand internal turning choose the Teknik Cutting Tools S16M boring bar — contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K277TM Label: 20mm boring bar DC-- 11T3 L150mm SKU: K277TM Core data Diameter: 20 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 30 mm Clamp head width: 11 mm Weight: 0.312 kg Cutting angle: 107.5° Cutting direction: left Torx key: T15 Torx screw: M3.5x8.5 Features Designation: S16M Compatible inserts: DC-- 11T3 (indexable inserts) Product type: boring bar Suitable for CNC lathe internal turning Stable clamping interface for repeatable accuracy FAQ What insert type fits this boring bar? The S16M boring bar is designed for DC-- 11T3 indexable inserts, enabling use of standard insert grades and geometries for a range of materials. Is the cutting orientation suitable for my lathe? This tool features left-hand cutting, so it is appropriate where counter-directional tool travel is required; check the machine tool setup before use. Which fastener secures the insert? Insert clamping uses a Torx T15 interface with an M3.5x8.5 screw for reliable, repeatable fixation. How does the shank size affect performance? The 16 mm shank offers improved rigidity within compatible holders, reducing deflection and improving surface finish on internal bores. Can this boring bar be used for small-diameter bores? With a 20 mm diameter, the tool is suitable for compact bores where a balance of access and stiffness is required; select holder and speeds accordingly for best results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact yet robust boring solution that combines internal coolant delivery, compatibility with VBMT 1103 indexable inserts and a stable 20 mm diameter for consistent chip control and surface finish. Order the KA310TM directly via Metav Werkzeuge or consult our specialists for technical guidance. KA310TM Boring Bar — 20 mm, internal coolant, for VBMT 1103 (Teknik Makina) The KA310TM is a purpose-built boring bar for left-hand turning operations, optimised to accept VBMT 1103 indexable inserts and to supply coolant directly to the cutting edge for improved process stability. 20 mm diameter for stable cutting Integrated internal coolant delivery Compatible with VBMT 1103 inserts Improved process stability and repeatable results The rigid 20 mm body paired with a 16 mm shank and the ISO designation A16Q ensures a balanced combination of stiffness and accessibility in confined setups. This geometry reduces deflection during radial cuts, which translates into consistent bore diameters and repeatable surface quality across batches. The specified cutting angle of 107.5° helps to distribute cutting forces and to prolong insert life, making the toolholder a pragmatic choice where dimensional accuracy and uptime are priorities. Controlled cooling and efficient chip management Built with internal coolant routing, the tool delivers coolant directly to the cutting zone to aid heat dissipation and to flush chips away from the insert pocket. This targeted cooling reduces thermal distortion and supports steadier cutting conditions, particularly beneficial when working at higher spindle speeds or with interruption-prone bores. The clamping head width of 11 mm and a cutting height of 30 mm are tailored to secure VBMT 1103 inserts reliably, improving chip flow and lowering the risk of built-up edge. Fast insert changes and low-maintenance operation Designed for pragmatic workshop routines, the bar uses a Torx T8 key and an M2.5x6.5 Torx screw for insert fixation, enabling quick, tool-assisted indexable insert replacement with minimal downtime. The straightforward fastening concept reduces maintenance complexity and keeps changeover times predictable—an efficiency gain for production cells and repair shops alike. The reduced service time supports higher machine availability and a better cost-per-part ratio over repeated operations. Suitable for precision shops and production environments Lightweight at approximately 0.276 kg and with an overall length of 180 mm, the bar is compact enough for close-quarters setups yet long enough to reach recessed bores in many lathe configurations. Its left-hand cutting orientation aligns it to specific turning strategies and tooling layouts, offering a specialised option where reversal of cutting direction is required. The combination of compact dimensions and robust features makes this tool appropriate for small-batch precision work as well as integration into larger CNC turning cells. For reliable left-hand boring with assured coolant delivery, choose the Teknik Makina KA310TM via Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for specification matching and order support. Technical Data Article number: KA310TM SKU: KA310TM ECLASS: 21180806 UID: KA310TM Facts Diameter: 20 mm Overall length: 180 mm Shank diameter: 16 mm Cutting height: 30 mm Clamping head width: 11 mm Weight: 0.276 kg Cutting angle: 107.5° Special features Compatibility: VBMT 1103 indexable inserts Internal coolant: yes Cutting direction: left ISO designation: A16Q Torx key: T8 Torx screw: M2.5x6.5 Product type: Boring bar Label: 20mm Bohrstange VBMT 1103 L180mm mit Innenkühlung Manufacturer: Teknik Makina FAQ Which inserts are compatible with this boring bar? The KA310TM accepts VBMT 1103 indexable inserts; the clamping head width and cutting height are configured to secure this insert type reliably. Is coolant delivered to the cutting zone? Yes. The bar features internal coolant routing designed to deliver coolant directly to the insert pocket and cutting edge. What is the shank diameter and overall length? The tool has a 16 mm shank and an overall length of 180 mm, offering a compact profile for many lathe and turning-toolholder arrangements. Which cutting direction is this boring bar set up for? This variant is specified for left-hand cutting, suitable for operations that require left-hand tool orientation. How are inserts fastened? Inserts are secured with a Torx screw; the tool uses a Torx T8 key and an M2.5x6.5 screw to allow quick, secure replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 20 mm diameter, internal coolant and a 180 mm overall length ensures steady chip evacuation and controlled heat dissipation for consistent boring performance; order the tool directly via Metav Werkzeuge or request advice from our consultants. Boring bar for VBMT 1103 indexable inserts — 20 mm, internal coolant (Teknik Makina) A Boring bar engineered for VBMT 1103 indexable inserts, providing left-hand cutting capability and internal coolant for improved process stability. 20 mm bar diameter, compatible with VBMT 1103 Internal coolant for improved chip flow 180 mm overall length for deeper bores Left-hand cutting, 93° cutting angle Accurate insert seating for consistent turning results The tool is designed to accept VBMT 1103 indexable inserts with a secure clamping interface that maintains repeatable positioning under load. With a 93° cutting angle and a cutting height of 30 mm, the configuration reduces radial forces and contributes to steady deflection behaviour in light- to medium-duty operations. The clamping screw specification M2.5x6.5 (Torx T8) ensures a compact and secure fixation; the small, precise fastener reduces the risk of micro-movements that would otherwise affect surface finish. Clear technical match between insert geometry and holder geometry translates into fewer regrinds and more consistent batch-to-batch quality. Built for coolant-assisted deep boring and thermal control Internal coolant routing is a primary performance advantage: the integrated coolant channel directs fluid to the cutting zone for effective heat removal and chip breaking, which extends insert life and stabilises cutting forces. The combination of a 20 mm cutting diameter and 180 mm overall length allows deeper reach while the 16 mm shank diameter provides a compact clamping footprint in many tool posts. The tool's modest mass (0.278 kg) helps reduce centrifugal loads in high-speed turning and contributes to dynamic balance. Together, these features support efficient cycle times and reduced downtime for insert changes. Workshop compatibility and straightforward maintenance Engineered for industrial and specialist turning environments, the bar fits standard clamping systems and is appropriate for CNC turning centres and toolroom lathes performing left-hand cuts. Material and application data support machining of a broad range of workpiece materials when paired with the correct insert grade and cutting data. Routine maintenance is simplified by the standard Torx T8 access and common screw size, enabling quick insert swaps and secure reassembly. The nominal ISO designation A16Q and the product SKU KA282TM assist in procurement and inventory control for production planners and buyers. For precision left-hand boring with integrated coolant, contact Metav Werkzeuge in Emmerich for personalised technical advice and reliable supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: KA282TM Manufacturer: Teknik Makina Facts Diameter: 20 mm Overall length: 180 mm Shank diameter: 16 mm Cutting height: 30 mm Weight: 0.278 kg Cutting angle: 93° Clamp holder width: 11 mm Cutting direction: left Special features Internal coolant For VBMT 1103 indexable inserts ISO designation: A16Q Torx key: T8 Torx screw: M2.5x6.5 Product type: Boring bar FAQ What insert type is compatible with this boring bar? The boring bar accepts VBMT 1103 indexable inserts and is configured to provide correct seating and clearance for that insert geometry. Is the coolant fed internally or externally for this tool? This holder features internal coolant, which supplies fluid directly to the cutting edge to improve chip control and thermal management. Which cutting direction is intended for the bar? The bar is manufactured for left-hand cutting operations with a 93° cutting angle suitable for standard left-hand turning setups. What are the key dimensions to check for machine compatibility? Relevant dimensions include a 20 mm cutting diameter, 180 mm overall length and 16 mm shank diameter; these should be matched to the machine's tool post and clearance envelope. What fastener and tool are required for insert clamping? Insert clamping uses a Torx M2.5x6.5 screw tightened with a T8 Torx key, offering compact and reliable fixation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO-compatible design that combines 20 mm body diameter with integrated coolant delivery and a secure A16Q shank for stable, repeatable internal turning operations; order the KA206TM through Metav Werkzeuge or consult the Metav team for process optimisation and stock availability. Boring Bar KA206TM for VBMT 1103 Indexable Inserts — 20 mm, internal coolant (Teknik Makina) The Boring Bar KA206TM is a purpose-built tool for internal turning with VBMT 1103 indexable inserts, designed to deliver consistent chip control and extended insert life in CNC and manual lathe applications 20 mm body diameter with internal coolant Compatible with VBMT 1103 indexable inserts A16Q shank, 16 mm shank diameter 180 mm total length, right-hand cutting Reliable coolant-to-edge design for improved tool life The internal coolant channel ensures coolant reaches the cutting edge directly, promoting efficient chip evacuation and reducing thermal stress on the insert. For operations that demand repeatable surface quality, this geometry helps to maintain cutting-edge integrity and reduces the frequency of insert changes. The combination of coolant delivery and diameter stability supports consistent machining cycles and lower overall tooling costs through extended component life. Secure seating and ISO-compliant shank for vibration reduction A standard A16Q shank and 16 mm shank diameter provide compatibility with a range of ISO toolholders and clamping systems. The robust shank interface and 11 mm clamping head width minimise micro-movement during cuts, which in turn reduces chatter and improves dimensional stability. This makes the bar particularly suitable where concentricity and repeatability are required across longer production runs. Serviceable fastening and optimised cutting geometry Assembly and indexable-insert retention are achieved with a M2.5x6.5 Torx screw and a T8 key, enabling fast, tool-assisted insert changes. The tool features a 93° cutting angle and a 30 mm cutting height that position the insert for effective material engagement while maintaining clearance to the bore. The right-hand cutting orientation is matched to standard lathe rotation for conventional internal turning tasks and predictable chip flow. Reach and compatibility for diverse internal turning tasks A total length of 180 mm gives the bar sufficient reach for many internal operations without excessive overhang, while the lightweight construction supports high-speed indexing and minimal spindle load. The KA206TM is compatible with VBMT 1103 indexable inserts, allowing familiar insert geometries to be applied where a compact, coolant-fed boring solution is required. This combination supports efficient set-up, reduced tool inventory and consistent production throughput. Contact Metav Werkzeuge to discuss how the Teknik Makina KA206TM boring bar can be integrated into existing machining setups and to confirm immediate availability from the Emmerich warehouse Technical data Article number: KA206TM Product type: Boring bar Manufacturer: Teknik Makina ISO designation: A16Q SKU: KA206TM Facts Diameter: 20 mm Total length: 180 mm Shank diameter: 16 mm Cutting height: 30 mm Cutting angle: 93° Weight: 0.27 kg Clamping head width: 11 mm Special features Internal coolant: yes Compatible inserts: VBMT 1103 Cutting direction: right-hand Torx screw: M2.5x6.5 Torx key: T8 ISO shank: A16Q FAQ Is this boring bar compatible with VBMT 1103 inserts? Yes. The KA206TM is designed specifically for use with VBMT 1103 indexable inserts and provides the appropriate seat and geometry for stable insert retention. Does the bar provide internal coolant to the cutting edge? Yes. Internal coolant is integrated into the design so coolant reaches the insert area directly, which improves chip evacuation and helps to prolong insert life. What shank standard does the bar use and what holder is required? The bar uses an A16Q shank with a 16 mm diameter; it is intended for holders that accept the A16Q interface for secure clamping and reduced vibration. Which tools are required for insert changes on this bar? Insert retention is secured by a M2.5x6.5 Torx screw and requires a T8 Torx key for assembly and disassembly. For what applications is this boring bar intended? The bar is intended for internal turning operations where VBMT 1103 indexable inserts are used, offering a coolant-fed solution for improved surface finish and tool life in general turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility and robust shank design for shorter setup times and consistent hole quality; the left-hand cutting orientation and 95° cutting angle help when reversing procedures or specific tool-path strategies are required. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Drill bar S16M for CC-- 09T3 indexable inserts — 20 mm, left-hand cutting (Teknik Makina) A S16M drill bar for CC-- 09T3 indexable inserts, intended for left-hand cutting in precision drilling and production environments 20 mm cutting diameter for robust drilling Compatible with CC-- 09T3 indexable inserts Left-hand cutting orientation for specialised operations S16M shank Ø16 mm, L150 mm overall length Greater process reliability through insert compatibility and diameter stability The 20 mm nominal diameter combined with compatibility for CC-- 09T3 indexable inserts delivers a reliable centre for repeatable holes in batch production. Indexable inserts allow tool bodies to remain in use while only the cutting tips are replaced, reducing tooling costs and downtime compared with solid-carbide replacements. The 95° cutting angle supports hole entry stability and reduces the tendency to wander on uneven surfaces, which is particularly valuable when drilling stacked components or pre-drilled pilot holes. These characteristics ensure predictable cycle times and less rework. Robust shank and secure fixing for minimised vibration and quick maintenance A shank specified as S16M with a Ø16 mm diameter and an overall length of L150 mm provides a compact, rigid connection to standard toolholders and turret systems. The bar is supplied with a Torx T15 interface and uses an M3.5x8.5 Torx screw for insert clamping, enabling fast and secure clamping procedures that reduce setup time and minimise the chance of insert loosening under cut. The construction and the modest mass (0.228 kg) contribute to lower tool-holder overhang effects, helping to maintain hole tolerances and surface finish across production runs. Practical application notes and handling recommendations for workshop use Designed for left-hand cutting applications, this tool is suitable where reverse rotation or specific tool-path strategies are required; the left orientation should be matched with machine spindle direction and CAM programming. The bar features a 30 mm effective cutting height, enabling sufficient insert exposure for typical drilling depths while preserving insert support. When changing inserts, use the specified Torx T15 key and the correct M3.5x8.5 screw to ensure clamp torque is consistent; uneven torque can affect runout and shorten insert life. For tailored advice on fixture compatibility or programming implications, Metav’s specialists can assist with technical clarifications. For reliable production performance with Teknik Makina components, contact Metav Werkzeuge for application support and ordering assistance — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number: K239TM Brand: Teknik Makina Product type: Drill bar Suitable for inserts: CC-- 09T3 Dimensions & Core Data Cutting diameter: 20 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 30 mm Weight: 0.228 kg Cutting angle: 95° Cutting direction: left Design & Fastening Details Shank designation: S16M Torx key: T15 Torx screw: M3.5x8.5 SKU: K239TM FAQ How does compatibility with CC-- 09T3 inserts benefit production? The compatibility with CC-- 09T3 indexable inserts allows the drill bar to retain a stable body while worn or damaged cutting tips are replaced, lowering tooling costs and shortening maintenance cycles for the K239TM drill bar. Is the left-hand cutting orientation suitable for standard CNC machines? Left-hand cutting requires matching spindle rotation and CAM paths; the K239TM tool is intended for operations where reverse cutting direction is specified or advantageous for the process. What fastening hardware is required for insert replacement? The bar uses a Torx T15 key and an M3.5x8.5 Torx screw for secure insert clamping; correct torque and clean threads are essential to maintain clamping reliability for the K239TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a stiff, compact design that combines a Ø20 mm shank and 200 mm overall length for reliable internal boring and repeatable set-ups; the right-hand cutting orientation and indexed Torx clamping help reduce changeover time. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Boring bar S20R – compact right-hand tool with Ø20 mm shank (Teknik Makina) A boring bar S20R engineered for precise internal turning and insert clamping, suitable for compact setups where rigidity and accurate tool positioning are essential Ø20 mm shank for rigid mounting Overall length 200 mm for short overhangs Right-hand cutting for standard machining Torx T15 clamp screw M3.5x8.5 High rigidity for consistent bore quality The stiff Ø20 mm shank and a short 200 mm overall length reduce deflection during internal machining, which translates into smaller tolerances and more consistent bore diameters. Reduced vibration improves surface finish and extends insert life, so fewer interventions are required during production runs. This makes the tool a reliable choice for small- to medium‑batch work where dimensional stability is essential. Secure clamping for fast, repeatable index changes Equipped with a Torx T15 clamping interface and M3.5x8.5 fastening screw, the holder ensures repeatable seating of the insert carrier and quick changes. The 15 mm clamping width provides a secure contact area between the clamping head and the tool body, reducing the likelihood of micro‑movement under cutting forces. Clear mechanical interfaces shorten downtime and simplify tool management on the shop floor. Machining geometry tuned for efficient metal removal The tool’s 3° cutting angle and 25 mm effective cutting edge height support stable metal removal with predictable chip flow in right‑hand operations. These geometric parameters are chosen to balance cutting forces and tool life, enabling efficient feed rates while maintaining surface integrity. For operators unfamiliar with the term, cutting angle describes the orientation of the cutting edge relative to the workpiece and directly affects cutting load and finish quality. Practical advantages for workshop integration Lightweight at 0.43 kg, the bar is straightforward to handle during set-up and reduces operator fatigue when mounting multiple holders. The compact profile fits tight bores and minimises overhang, lowering the risk of chatter in confined operations. Supplied as a labelled item (SKU K201TM) from Teknik Makina, the design is intended to integrate smoothly into established tool inventories and stock systems. For reliable internal turning with a compact, rigid solution, consider the Teknik Makina S20R boring bar and contact Metav Werkzeuge for tailored application advice or to arrange supply directly from Emmerich. Technical Data Article number: K201TM Label: 20mm Bohrstange L200mm Name ISO: S20R Manufacturer: Teknik Makina Core specifications Diameter: 20 mm Overall length: 200 mm Weight: 0.43 kg Shank diameter: 20 mm Cutting edge height: 25 mm Clamping width: 15 mm Cutting angle: 3° Materials & features Cutting direction: right Torx key: T15 Torx screw: M3.5x8.5 Product type: Boring bar SKU: K201TM FAQ What materials is this boring bar suited for? The boring bar S20R (Teknik Makina, SKU K201TM) is intended as a general-purpose holder; material suitability depends on the chosen insert and cutting parameters rather than the holder itself How is the insert clamped and secured? Clamping is achieved via a Torx T15 screw (M3.5x8.5), which secures the clamping head to the tool body for repeatable seating Can the tool be used for long‑reach boring operations? The 200 mm overall length and Ø20 mm shank are optimised for short to medium overhangs; for long‑reach applications a larger shank and longer‑reach holder would be recommended Which cutting direction does the holder support? This holder is configured for right‑hand cutting, suitable for standard turning and internal boring orientations Is the product identified for stock control? Yes, the tool is supplied with SKU K201TM and the label "20mm Bohrstange L200mm" for straightforward inventory management Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 16 mm shank, compatibility with CC-- 09T3 indexable inserts and a 180 mm overall length delivers stable, low‑vibration internal turning and predictable tool life; order the S16Q SCLCL tooling via Metav Werkzeuge or ask our consultants for sizing advice. Boring bar S16Q SCLCL – SCLC holder for CC-- 09T3 indexable inserts (Teknik Makina) Boring bar S16Q SCLCL is a left‑hand SCLC holder engineered for accurate internal boring with CC-- 09T3 indexable inserts. ISO S16Q SCLCL design for secure clamping Compatible with CC-- 09T3 indexable inserts 16 mm shank for rigid toolholder support Left‑hand cutting, 180 mm overall length Greater rigidity and repeatable bore quality The holder is built around a 16 mm shank and a 20 mm diameter body to deliver the rigidity required for internal turning applications. That increased stiffness reduces chatter and improves surface finish, which in turn extends the life of indexable inserts and lowers rework rates. A 95° cutting angle gives a controlled engagement geometry for left‑hand operations, making the tool suitable where reliable bore tolerance and repeatability are priorities on both single‑piece and small‑batch production runs. ISO format for fast integration and reduced setup time The S16Q SCLCL ISO designation ensures compatibility with established toolholder formats, so the tooling integrates quickly into existing setups. Use of standard CC-- 09T3 inserts simplifies stocking and replacement; insert changes are quick and do not require bespoke tooling. At just 0.285 kg, the assembly is light enough for rapid handling during tool changes yet robust enough for stable turning, balancing ergonomic handling with production reliability. Designed for consistent workshop productivity Left‑hand cutting direction and the SCLC clamping form provide a dependable solution for internal boring where insert accessibility and secure clamping matter. The 180 mm overall length delivers reach for a range of bore depths while keeping overhang minimal to preserve stiffness. The combination of ISO conformity and an industry‑proven insert form supports efficient maintenance cycles and predictable tooling costs, backed by Metav’s supply chain and technical guidance for European workshops. For reliable left‑hand boring operations, contact Metav Werkzeuge to discuss the S16Q SCLCL boring bar (SKU K240TM) and arrange fast delivery from Emmerich. Technical Data SKU: K240TM Manufacturer: Teknik Makina ISO designation: S16Q SCLCL Type: SCLC for CC-- Indexable Inserts Cutting direction: left Compatible inserts: CC-- 09T3 Facts Shank diameter: 16 mm Diameter: 20 mm Overall length: 180 mm Cutting angle: 95° Cutting height: 30 mm Weight: 0.285 kg Special features Left‑hand SCLC holder geometry ISO standard holder format for ease of integration Designed for secure clamping of indexable inserts FAQ Which inserts are compatible with this holder? The S16Q SCLCL boring bar (Teknik Makina, SKU K240TM) is specified for CC-- 09T3 indexable inserts; this geometry and size are the intended fit for secure seating and correct cutting geometry. What are the key dimensions to consider when fitting this tool? The holder has a 16 mm shank, a 20 mm diameter body and an 180 mm overall length, dimensions that determine holder rigidity and reach when planning setup and clearance. Is the cutting direction suitable for right-to-left boring operations? Yes, the tooling is configured for left‑hand cutting, with a 95° engagement angle that defines the intended chip flow and cutting forces for left‑hand internal turning. How does the ISO designation benefit workshop integration? The S16Q SCLCL ISO format ensures the boring bar matches standard toolholder interfaces, reducing setup time and simplifying insert stocking compared with non‑standard holders. What operational advantages does this holder provide? The combination of a rigid 16 mm shank, ISO‑compatible insert format and a controlled cutting angle results in improved bore surface finish, reduced vibration and predictable insert life, supporting consistent workshop throughput. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, solid-carbide rigidity and precise insert compatibility for steady cycle times and repeatable surface quality — order the KE20TM directly via Metav Werkzeuge or request tailored advice from our consultants. KE20TM Boring Bar — SCLCL with internal coolant for CCMT 09T3 inserts The KE20TM is a left-hand boring bar designed for CNC turning and finishing operations, supplying coolant internally to the cutting edge for improved chip control and consistent surface quality Internal coolant supply for reliable chip evacuation Solid carbide construction for high rigidity Compatible with CCMT 09T3 indexable inserts Left-hand cutting direction for specialised operations Consistent surface quality through optimised coolant delivery The integrated internal coolant channel directs cutting fluid precisely to the cutting edge, which reduces heat at the tool–workpiece interface and supports controlled chip evacuation. As a result, surface integrity is improved and tool wear is reduced, so cycle stability is enhanced during prolonged runs. This technical arrangement is particularly advantageous when machining materials requiring continuous coolant flow, since coolant is delivered directly rather than relying on external flood application. High rigidity for vibration-free finishing and repeatability Manufactured from solid carbide, the bar provides high stiffness and dimensional stability, which minimises chatter and maintains bore tolerance across repetitive cycles. The 20 mm diameter body and 200 mm overall length are optimised for a balance between reach and rigidity, enabling precise cutting depths with the CCMT 09T3 indexable inserts specified for this tool. The ISO designation E16R SCLCL 09 identifies the geometry and clamping arrangement, ensuring straightforward integration into CNC tool setups and predictable performance characteristics. Quick insert changes and robust clamping for low downtime The tool is supplied with a retention screw specified as M3.5x8.5 and is tightened using a T15 Torx key, enabling secure seat locking and rapid insert replacement without special adapters. A 16 mm shank facilitates firm chuck or turret engagement, while the modest mass (approx. 0.5 kg) simplifies handling during tool changes. These design details reduce non-cutting time and support consistent indexing, so production remains efficient and maintenance is straightforward when scheduled tool exchanges are required. For reliable high-performance turning with Teknik Makina quality, contact Metav Werkzeuge in Emmerich for technical advice and fast supply of the KE20TM boring bar. Technical Data SKU: KE20TM ISO designation: E16R SCLCL 09 Manufacturer: Teknik Makina Core Dimensions Diameter: 20 mm Shank diameter: 16 mm Overall length: 200 mm Cutting height: 10 mm Weight: 0.5 kg Compatibility & Features Insert type: CCMT 09T3 Internal coolant: yes Cutting direction: left-hand Material: solid carbide Retention screw: M3.5x8.5 Torx key: T15 FAQ What type of inserts fit this boring bar? The KE20TM boring bar is designed for CCMT 09T3 indexable inserts, which are commonly used for finishing and general turning. Is coolant routed to the cutting edge? Yes, the KE20TM features internal coolant delivery that supplies fluid directly to the insert seat to aid cooling and chip control. What are the main dimensions relevant for toolholding? The bar has a 20 mm diameter, a 16 mm shank and an overall length of 200 mm, which should be checked against turret and chuck capacity. Which direction does the bar cut? This tool is specified as left-hand cutting, suitable for operations where a left-hand approach is required. Which retention screw and key are required for insert changes? Insert clamping uses an M3.5x8.5 screw tightened with a T15 Torx key for secure and repeatable seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine solid‑carbide rigidity with integrated coolant delivery for consistent bore quality; the internal coolant and CCMT‑compatible head deliver reliable chip control and precise finishing—order the KE13TM boring bar directly via Metav Werkzeuge or consult our technical advisors. Bohrstange KE13TM — solid‑carbide boring bar, SCLC with internal coolant by Teknik Makina The Bohrstange KE13TM is a compact, high‑rigidity boring bar designed for precise external turning and bore finishing with internal coolant delivery; suited to workshop and small‑batch CNC environments where stable tool performance and straightforward insert replacement are required Solid‑carbide construction for high rigidity Internal coolant for reliable lubrication Compatible with CCMT 09T3 indexable inserts Right‑hand cut, 20 mm diameter, 200 mm length Improved bore quality through rigid solid‑carbide design The KE13TM combines a solid‑carbide body with a compact geometry to reduce vibration and improve dimensional stability during finishing cuts. This construction translates into tighter tolerances and longer intervals between rework operations, particularly on short‑overhang set‑ups. With a 20 mm diameter and overall length of 200 mm, the bar balances reach and stiffness: the shorter effective length reduces deflection while the mass (0.5 kg) contributes to controllable dynamics. The ISO designation E16R SCLCR 09 denotes the tool head form and mounting standard, which helps planners match the holder to existing toolposts and adaptors without guesswork. Consistent cooling and efficient chip control at the cutting edge Internal coolant channels are routed to the cutting zone to support coolant‑assisted machining and improved chip evacuation. The internal coolant feature lowers cutting temperatures and helps maintain tool life when performing close‑tolerance finishing. The tool accepts CCMT 09T3 indexable inserts, giving production teams the flexibility to select grade and geometry for specific materials and surface finishes. Insert clamping uses a Torx screw (M3.5x8.5) that is tightened with a Torx T15 key, ensuring secure fixing and straightforward index changes with standard workshop tooling. Compatibility and practical benefits for workshop workflows Practical details such as the 16 mm shank diameter and right‑hand cutting direction make the KE13TM straightforward to integrate into existing turning and boring operations. Compatibility with CCMT inserts enables fast tool reconditioning and a predictable inventory strategy for spare inserts. The compact balance of length and diameter supports reduced cycle times through stable cutting conditions and repeatable machining results. Operators benefit from fewer adjustments and clearer process control, while planners appreciate the clear technical designation and measurable build parameters for CAM set‑ups. For tailored application advice on the Teknik Makina KE13TM boring bar with internal coolant, contact Metav Werkzeuge for detailed specification matching at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: KE13TM Manufacturer: Teknik Makina ISO designation: E16R SCLCR 09 Material: solid‑carbide Internal coolant: yes Facts Diameter: 20 mm Overall length: 200 mm Cutting height: 10 mm Shank diameter (aufnahme): 16 mm Weight: 0.5 kg Compatible insert: CCMT 09T3 Fastener: M3.5x8.5 Torx key: T15 Cutting direction: right Secondary designation: SCLC with Coolant Special features Solid‑carbide construction Internal coolant channel for coolant‑to‑cutting‑edge delivery CCMT‑compatible indexable inserts Right‑hand cutting geometry FAQ What inserts fit this boring bar? The KE13TM is designed for CCMT 09T3 indexable inserts; the head geometry accepts that insert size for flexible grade and geometry selection. Is coolant delivered to the cutting edge? Yes, the bar features internal coolant channels that provide coolant directly to the cutting zone for improved tool life and chip control. What is the shank size and how does it mount? The holder uses a 16 mm shank (aufnahme) and the ISO designation E16R SCLCR 09 helps ensure compatibility with matching toolholders and adaptors. Which screw and key are required for insert clamping? Insert clamping uses an M3.5x8.5 screw secured with a Torx T15 key for reliable insert retention. Is this tool suitable for finishing operations? The solid‑carbide construction, short effective length and internal coolant make the KE13TM well suited to finishing and precision external turning where stability and surface quality are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust rigidity, targeted coolant delivery and precise insert compatibility to maintain consistent surface quality and longer insert life in serial turning operations. The integration of internal coolant with a compact shank geometry reduces cycle interruptions and supports reliable chip evacuation. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Teknik Makina A16M SDQCR Boring Bar — Internal coolant, for DC-- 0702 indexable inserts The A16M SDQCR boring bar is a compact external boring toolholder designed for CNC turning applications that accept DC-- 0702 indexable inserts, offering internal coolant and a right-hand cutting configuration A16M SDQCR design for indexable inserts Internal coolant for reliable chip evacuation 16 mm shank diameter, 150 mm overall length Compatible with DC-- 0702 indexable inserts Enhanced stability and measurable surface benefits for turning operations With a compact 16 mm shank and a balanced 150 mm overall length, the toolholder is engineered to reduce overhang and vibration. The 107.5° cutting angle provides a stable engagement geometry that spreads cutting forces and helps maintain consistent contact between insert and workpiece, which translates into a finer surface finish and longer tool life. Because rigidity directly affects repeatability, the reduced deflection of the assembly is reflected in improved dimensional accuracy during serial production runs. These mechanical advantages are particularly relevant when machining medium-duty components where productive cycle time and repeatable tolerances are required. Targeted coolant flow and chip control to protect inserts and increase uptime Equipped with internal coolant, the bar supplies cooling fluid directly to the cutting zone, which lowers thermal load on the insert and encourages efficient chip control. That focused lubrication reduces built-up edge and thermal wear, so insert changes become less frequent and process stability improves. The right-hand cutting orientation supports standard turning setups and predictable chip flow. For operations where heat and chip evacuation are critical — such as interrupted cuts or higher spindle speeds — the internal coolant feature is a practical performance enhancer that reduces scrap risk and contributes to continuous production. Compatibility that simplifies toolroom logistics and integration Designed for use with DC-- 0702 indexable inserts, the holder streamlines tooling choices and allows for straightforward stocking of common insert grades. The tool’s modest mass (0.232 kg) helps minimise imbalance in high-speed spindles and simplifies dynamic balancing where required. The shank and clamping geometry are compatible with standard toolposts and turret adapters, so retrofit into existing setups is uncomplicated. Sourcing through Metav provides a dependable supply chain and technical filtering at the distribution hub in Emmerich, ensuring that procurement for workshops and small production facilities is backed by consistent quality assurance. For application-specific recommendations on Teknik Cutting Tools’ A16M SDQCR boring bar (KA143TM) — including suitability for specific materials and insert grades — contact Metav Werkzeuge for tailored advice and secure supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: KA143TM Manufacturer: Teknik Makina ISO designation: A16M SDQCR Compatible inserts: DC-- 0702 Core specifications Shank diameter: 16 mm Cutting height: 30 mm Overall length: 150 mm Weight: 0.232 kg Diameter: 20 mm Cutting angle: 107.5° Cutting direction: right Internal coolant: yes Compatibility & features For indexable inserts DC-- 0702 Clamping holder designation: 07 Story trigger: bohrstange FAQ Which inserts fit this boring bar? The A16M SDQCR boring bar is specified for DC-- 0702 indexable inserts; Teknik Cutting Tools’ holder and those inserts form the intended combination for correct seating and chip control (SKU KA143TM). Does the bar provide coolant to the cutting edge? Yes — internal coolant is integrated and channels fluid to the cutting zone to improve cooling and chip control, which helps extend insert life. What are the main dimensions to check for machine compatibility? Key dimensions are the 16 mm shank diameter and 150 mm overall length; confirm these against the machine tool’s toolpost and turret capacity before fitting. Is the cutting direction right- or left-handed? The configuration is right-handed, suitable for standard turning operations with conventional toolholding orientation. How does the 107.5° cutting angle affect machining? The 107.5° cutting angle distributes cutting forces to improve stability and reduce vibration, which typically results in better surface finish and less insert wear. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A left‑hand boring bar with internal coolant and a compact 20 mm diameter delivers stable, repeatable turning and improved chip control for shorter cycle times; compatible with TCMT 1102 indexable inserts for flexible tooling choices. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. Boring Bar STFC for TCMT Indexable Inserts — left‑hand, internal‑coolant toolholder (Teknik Makina) The Boring Bar STFC for TCMT Indexable Inserts is a left‑hand turning toolholder with internal coolant, designed for use with TCMT 1102 indexable inserts in external turning and facing operations. Internal coolant for effective chip evacuation Left‑hand cutting for reverse‑direction turning Compatible with TCMT 1102 indexable inserts 20 mm diameter, 180 mm overall length Greater rigidity for consistent cycle times The STFC geometry and a 90° cutting angle provide a solid support platform that reduces chatter and improves surface finish. With a compact 20 mm outer diameter and shaft 16 mm, the toolholder offers a balance between accessibility and stiffness, which translates into reduced scrap rates and more predictable machining times. The integrated internal coolant directs cutting fluid to the insert cutting edge, lowering temperatures during heavy cuts and thereby extending insert life. For production environments seeking reliable throughput, this combination supports efficiency gains without complex retrofit work. Compatible inserts and simplified tooling logistics Designed for TCMT 1102 indexable inserts, the toolholder accepts commonly stocked turning grades and geometries for quick changeovers. The STFC designation indicates an insert seat optimised for secure clamping and controlled chip flow; this means the same insert families can be used across different holders, simplifying inventory. The left‑hand cutting orientation is specified for operations where the lathe or the workpiece requires reverse‑direction turning — the design ensures the insert faces the correct cutting forces. Clear identification of insert type and seat geometry supports straightforward tool selection and reduces setup time. Practical workshop advantages and maintenance ease At an overall length 180 mm and weighing 0.289 kg, the toolholder is compact to handle yet robust enough for repeatable performance in batch and jobbing shops. The accessible design of the clamp and insert pocket enables fast insert indexation and inspection, reducing downtime for maintenance. Internal coolant reduces the need for external nozzles and helps maintain a clean workpiece and tool area, contributing to safer, more ergonomic working conditions. Supplied in a standard ISO seat (A12K STFCL), the component integrates into existing tool chains with minimal adaptation and supports predictable tool life planning. For tailored advice on Teknik Cutting Tools boring bars or to secure supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 — specialist guidance and fast provision available Technical data Article number: KA184TM Manufacturer: Teknik Makina ISO designation: A12K STFCL Product designation: STFC for TCMT indexable inserts Cutting direction: left Facts Diameter: 20 mm Shaft diameter: 16 mm Overall length: 180 mm Cutting height: 30 mm Weight: 0.289 kg Cutting angle: 90° Special features Internal coolant Compatible with TCMT 1102 Left‑hand cutting STFC geometry for TCMT inserts FAQ What inserts fit this boring bar? The boring bar is designed for TCMT 1102 indexable inserts; the STFC seat secures the TCMT shape for standard clamping and chip control. Is the tool suitable for left‑hand turning only? Yes, the toolholder is configured for left‑hand cutting, intended for reverse‑direction turning operations where the insert orientation matches left‑hand cuts. How does internal coolant benefit machining with this tool? Internal coolant delivers fluid directly to the cutting edge, lowering temperatures, improving chip evacuation and extending insert life compared with external coolant alone. Can the bar be used in confined spaces? With a 20 mm diameter and 180 mm overall length, the holder is compact and suited to restricted access operations while maintaining sufficient rigidity. What ISO designation does the holder use? The holder carries the ISO designation A12K STFCL, which identifies the seat geometry and mounting style for compatibility with matching toolposts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, left-hand cutting geometry and a compact Ø16 mm shank for stable, coolant-fed turning; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar A16Q STFCL (KA185TM) — STFC for TCMT indexable inserts, internal coolant (Teknik Makina) A left-hand boring bar A16Q STFCL designed for coolant-fed turning with TCMT 16T3 indexable inserts, suitable for precision external turning and facing on CNC lathes. Left-hand cutting direction Internal coolant supply For TCMT 16T3 indexable inserts Shank Ø16 mm, overall length 180 mm Greater rigidity and repeatable geometry for reliable turning The A16Q STFCL boring bar combines a compact Ø16 mm shank with a balanced overall length of 180 mm, providing a stable toolholder for standard turning tasks. The short, rigid shank reduces vibration and improves surface finish, while the defined 90° cutting angle ensures predictable engagement for facing and finish turning operations. The low mass (approx. 0.287 kg) reduces spindle load during acceleration and deceleration phases, contributing to consistent cycle times on both manual and CNC lathes. Coolant-fed performance that prolongs insert life Equipped with internal coolant, the tool delivers cutting fluid directly to the insert seat and cutting edge, promoting efficient heat control and improved chip evacuation. This focused coolant supply helps to extend the life of indexable inserts and maintain cutting-edge stability under continuous operation. The holder is specified for TCMT 16T3 inserts, enabling the use of widely available carbide grades and coatings suited to a range of machining tasks. Standardised insert format for easy inventory management Compatibility with the common TCMT 16T3 insert format simplifies consumable management across the workshop. The STFC style with ISO designation A16Q STFCL aligns with established toolholder standards, facilitating quick insert changes and interchangeability with other holders that accept the same plate. Reduced tooling complexity supports shorter setup times and a more efficient production flow. Practical benefits for modern shop floors Left-hand geometry is provided for machining directions that require counterclockwise approach or specific part orientations, and the tool’s internal coolant capability makes it suitable for operations where cooling at the cutting zone is critical. The unit’s compact dimensions and standard insert fit make it a pragmatic choice for calibration of tool libraries and for operations where space and accessibility are limited. The combination of standardised inserts, coolant feed and a robust shank supports predictable performance and lower operational risk. For machining enquiries or application support for the Teknik Cutting Tools boring bar (A16Q STFCL, SKU KA185TM), contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will recommend the right setup for the job. Technical data SKU: KA185TM Manufacturer: Teknik Makina ISO designation: A16Q STFCL Article name (EN): STFC for TCMT indexable inserts ECLASS: 21180806 Key measurements Overall length: 180 mm Diameter: 20 mm Shank diameter: 16 mm Cutting height: 30 mm Cutting angle: 90° Weight: 0.287 kg Design & special features Indexable insert type: TCMT 16T3 Cutting direction: Left-hand Internal coolant: Yes FAQ Which insert type fits this toolholder? The toolholder accepts TCMT 16T3 indexable inserts; the A16Q STFCL geometry is matched for that insert size and seating. Is the coolant delivered to the cutting edge? Yes, the boring bar is equipped with internal coolant to supply fluid directly to the insert seat and cutting zone. What does left-hand cutting direction mean for setup? Left-hand indicates the cutting approach and insert orientation; the boring bar is configured for operations that require counterclockwise engagement relative to the spindle. What are the key dimensions to check for machine compatibility? Confirm the Ø16 mm shank and overall length of 180 mm against the toolpost or turret clamping capacity before installation. Can this toolholder be used for facing and finishing? The 90° cutting angle and TCMT insert compatibility make the holder suitable for facing and finish turning where a perpendicular engagement is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining internal coolant with a 20 mm solid shank and a secure Torx clamp, the KA319TM delivers steady chip control and repeatable insert positioning for efficient internal machining; order the tool directly via Metav Werkzeuge or consult our specialists for matching insert grades and holder selection. KA319TM boring bar – 20 mm diameter, internal coolant (A16Q SVQCL) | Teknik Makina The KA319TM boring bar is engineered for internal turning with VCMT 1103 indexable inserts, offering through‑coolant capability and a standard ISO A16Q SVQCL shank for stable mounting in CNC toolholders Internal coolant for effective chip evacuation Compatible with VCMT 1103 indexable inserts ISO A16Q SVQCL for standardised mounting Torx M2.5x6.5 clamp with T8 key Higher throughput and consistent finish through internal coolant The KA319TM is built to improve cycle reliability in internal turning operations by integrating a through‑coolant channel that directs cutting fluid closely to the cutting edge. This feature reduces tool temperature, supports consistent chip breaking and lowers the risk of thermal distortion, which in turn helps to maintain a repeatable surface finish and prolong insert life. The 20 mm diameter and 180 mm overall length provide a balanced reach for many common boring tasks without unnecessarily stressing the spindle, while the ISO A16Q SVQCL designation ensures compatibility with standard clamping systems used in workshop spindle noses and turret adapters. Secure clamping and rapid indexable‑insert changes Clamping integrity is central to predictable machining results; the holder employs a Torx M2.5x6.5 screw and is designed for tightening with a T8 key, giving a compact and reliable fixation for VCMT 1103 inserts. The compact screw design allows for quick insert replacement and stable seat contact, reducing downtime during shift changes. At approximately 0.271 kg, the assembly keeps inertia low for dynamic runs while still providing sufficient mass to dampen chatter in moderate cutting conditions. For less experienced users, indexable inserts are hardened, pre‑ground cutting tips that can be rotated or replaced without regrinding, offering repeatable geometry and predictable tool life. Practical workshop integration and suitable applications This boring bar is suitable for internal finishing and semi‑finishing tasks where indexable carbide inserts are preferred for productivity and cost control. The combination of standard ISO shank dimensions and coolant supply makes the holder adaptable to many CNC lathes and machining centres that accept A16Q‑type tooling. Where surface integrity and tool life are priorities, the internal coolant option reduces heat at the cutting zone and helps evacuate chips from confined bores. For selection, pairing the holder with the appropriate grade of VCMT 1103 inserts ensures the best balance between wear resistance and toughness for the machined material. Contact Metav Werkzeuge for order fulfilment and personalised technical advice on tooling combinations and insert grades: Metav Werkzeuge supplies the KA319TM and can advise on compatibility and delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA319TM Name: Boring bar — SVQC for VCMT indexable inserts ISO designation: A16Q SVQCL Manufacturer: Teknik Makina ECLASS: 21180806 Numbers / Core technical data Diameter: 20 mm Overall length: 180 mm Weight: 0.271 kg Special features Internal coolant: yes Compatible inserts: VCMT 1103 Torx screw: M2.5x6.5 Torx key: T8 FAQ Which insert type fits this holder? The KA319TM boring bar is designed for VCMT 1103 indexable inserts; pairing with the recommended insert geometry ensures correct seating and chip control. Does the holder provide through‑coolant functionality? Yes, this holder features internal coolant to feed cutting fluid directly to the insert edge, improving cooling and chip evacuation during internal machining. What is the ISO designation and why does it matter? The tool carries the A16Q SVQCL ISO designation, which defines the shank interface and ensures compatibility with standard A16 clamping fixtures in many CNC toolposts. Which fastening hardware is used for the insert? Insert clamping is achieved with a Torx M2.5x6.5 screw tightened using a T8 key for secure and repeatable insert retention. Is the KA319TM suitable for long‑reach boring operations? With an overall length of 180 mm and a 20 mm shank, the holder is aimed at common internal turning tasks; extremely long‑reach operations may require alternative geometries to control deflection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Data inconsistency detected: the compatible indexable insert is listed as "TCMT 16T3" in one field but referred to as "TCMT 1102" in the title/description, which creates confusion and potential errors in understanding or processing the product information; therefore, it is essential to review and rectify this discrepancy in the product data to ensure accuracy and consistency across all fields before resubmitting, as such inconsistencies can lead to miscommunication, incorrect orders, or other operational issues that may negatively impact both the supplier and the customer, highlighting the importance of maintaining precise and uniform data throughout all relevant documentation and systems.

Benefit from reliable compatibility with TCMT 16T3 indexable inserts, a compact 20 mm tool shank and a stable right-hand cutting geometry — ideal for predictable turning results on production lines. Order the clamping holder directly via Metav Werkzeuge or consult our specialists for application advice. Clamping holder D474TM for TCMT 16T3 indexable inserts — 20 mm shank, right-hand A robust clamping holder D474TM designed for turning operations using TCMT 16T3 indexable inserts, offering a compact 20 mm profile for straightforward toolpost integration. Robust 20 mm shank width Compatible with TCMT 16T3 inserts Right-hand cutting geometry 91° cutting angle for stable results Torx T15 clamping screw M3.5x8.5 Precise clamping for consistent cutting performance The primary benefit of this clamping holder is its secure retention of TCMT 16T3 indexable inserts, which reduces micro‑movement and extends predictable tool life. The 20 mm shank width and 20 mm cutting head provide a compact form factor that suits tight toolpost arrangements while maintaining sufficient rigidity. A 91° cutting angle helps to distribute cutting forces evenly, lowering vibration and improving surface finish. For production environments, this means fewer reworks and more consistent part quality with every shift. Easy fitment and dependable fastening for shop-floor use Integration into existing turning setups is straightforward thanks to the ISO-style designation and a familiar clamping concept. The holder uses an M3.5x8.5 clamping screw with a Torx T15 drive, simplifying assembly and repeatable torque application during insert changes. The right-hand cutting orientation is clearly defined, avoiding mix-ups on multi-tool fixtures. The compact overall mass (approx. 0.382 kg) contributes to balanced tool assemblies and reduces centrifugal stresses at higher spindle speeds, enhancing operational safety and reducing downtime. Built for production — stability, repeatability and supply assurance Manufactured by Teknik Makina, the holder suits workshops that prioritise stability and supply reliability. The combination of measured cutting head dimensions and a solid clamping interface supports stable chip control and predictable insert seat life. For procurement, the compact SKU and clear technical footprint make inventory management simpler and reduce ordering errors. The design focuses on practical benefits: predictable cutting forces, quick insert replacement and consistent repeatability across batches. For dependable turning performance and expert advice on the D474TM clamping holder from Teknik Makina, contact Metav Werkzeuge to discuss suitability for specific applications and secure reliable delivery from Emmerich. Technical data Article number: D474TM Product type: Clamping holder Label: Klemmhalter TCMT 16T3 Brand: Teknik Makina ISO designation: 2020 Facts Shank width: 20 mm Height: 20 mm Cutting head width: 20 mm Cutting height: 22.5 mm Weight: 0.382 kg Cutting angle: 91° Cutting direction: right Clamping screw: M3.5x8.5 Torx key: T15 Special features Compatible with TCMT 16T3 indexable inserts SKU: D474TM Compact design for tight toolpost arrangements FAQ Which inserts fit this holder? The clamping holder accepts TCMT 16T3 indexable inserts; the seat and clamping geometry are matched to that insert format. Is the holder suitable for left-hand cutting operations? This model is configured for right-hand cutting; select a left-hand variant if required for opposite‑direction applications. What drive is required to tighten the clamping screw? A Torx T15 driver is specified for the M3.5x8.5 clamping screw to ensure correct torque and repeatable clamping. How does the 91° cutting angle affect machining? A 91° cutting angle improves stability by directing cutting forces into the holder body, which helps reduce vibration and improves surface finish. Can this holder be used in compact toolposts? Yes — the 20 mm shank and compact cutting head width make it suitable for tight toolpost arrangements while maintaining rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the holder's compact geometry and precise seating for consistent tool life and predictable cycle times; order the clamping holder directly via Metav Werkzeuge or contact our advisors for matching options. Clamping Holder SEL 2020 (16 IR) — Left‑hand, 125 mm The Clamping Holder SEL 2020 is a left‑hand toolholder designed for indexable 16 IR inserts, engineered for turning applications where a compact head and reliable clamping are required Left‑hand orientation for specific turning tasks Compatible with 16 IR indexable inserts Overall length 125 mm for stable mounting Compact head: 20 x 20 mm cutting interface Consistent rigidity for repeatable turning results The holder's compact cross section delivers rigidity where it matters: a 20 mm head and body width combined with a 30 mm cutting height ensure the insert seat remains aligned under load. This geometry reduces chatter and improves surface finish, which in turn lowers scrap rates and rework. The design supports predictable tool life through stable force transfer and consistent seat contact, making the component suitable for batch production and process standardisation. Standardised insert compatibility to simplify tooling management Designed for 16 IR indexable inserts and carrying the SEL 2020 ISO designation, this toolholder aligns with common insert inventories and ISO seating conventions. The left‑hand cutting direction is specified for operations where the tool must cut from the opposite approach; this avoids ambiguity during setup and clarifies tool planning across shifts. The holder also accepts bars designated K16‑IR16, streamlining the selection of matching boring bars and reducing the need for bespoke tooling. Compact form factor for stable clamping and space‑efficient layouts With an overall length of 125 mm and a net weight of 0.414 kg, the holder offers a stable mass for secure clamping without adding unnecessary overhang. The compact 20 x 20 mm cutting interface allows integration into tight toolposts and multi‑tool turrets, improving accessibility in confined setups. Reduced projection minimises bending moments at the insert, which benefits precision and extends the usable life of the indexable cutters. Built for workshop productivity and predictable maintenance The geometry and compatibility choices reduce tool change complexity and inventory variety, supporting faster changeovers and less downtime. Where process reliability is paramount, the clamping concept provides a secure seating that supports repeatability across multiple setups. Maintenance is straightforward: standardised inserts and familiar mounting interfaces mean spares and replacements are interoperable with established tool systems, helping to keep production running smoothly. For tailored recommendations on integrating the SEL 2020 clamping holder into existing toolsets, contact Metav Werkzeuge for technical advice and ordering support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: D510TM Manufacturer: Teknik Makina ISO designation: SEL 2020 Compatible inserts: 16 IR Facts Overall length: 125 mm Head width: 20 mm Body width: 20 mm Holder height: 20 mm Cutting height: 30 mm Weight: 0.414 kg eClass: 21181004 Special features Left‑hand cutting direction Fits insert type 16 IR Compatible with K16‑IR16 boring bar designation Designed for indexable insert turning applications FAQ What inserts fit this toolholder? The clamping holder accepts 16 IR indexable inserts; the SEL 2020 seat is matched to that insert family for secure seating. Is the holder suitable for left‑hand cutting only? Yes, the design specifies a left‑hand cutting orientation and is intended for operations that require that cutting direction. What are the key dimensions to check for machine compatibility? Check the 125 mm overall length, 20 x 20 mm head interface and the 30 mm cutting height to ensure proper fit and clearance. Can this holder be used in compact turrets or small toolposts? The compact head and moderate length make the holder appropriate for tight setups, where reduced overhang improves stability. Which manufacturer produces this holder and where can it be sourced? The item is produced by Teknik Makina (designation SEL 2020, SKU D510TM) and is available through Metav Werkzeuge for procurement and technical queries. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, stable machining with a compact design: the 20 mm shank and internal coolant combine rigidity and thermal control for consistent results, while compatibility with ADKT 10T3 indexable inserts ensures quick tool changeovers. Order directly via Metav Werkzeuge or consult our specialists for seamless integration into the production line. Indexable End Mill S077TM (20 mm shank) by Teknik Makina — internal coolant, for ADKT 10T3 Indexable End Mill S077TM engineered for secure clamping and coolant-fed machining with ADKT 10T3 indexable inserts, suitable for workshop and production environments 20 mm shank for stable tool clamping Internal coolant for effective chip evacuation Compatible with ADKT 10T3 inserts (Korloy) Three cutting edges, 35 mm cutting length Maximise rigidity and thermal control for reliable milling A compact tool geometry with a 20 mm shank and a total length of 100 mm delivers a high degree of rigidity at the toolholder interface, reducing chatter and improving surface finish in interrupted and continuous milling operations. The integrated internal coolant supplies coolant directly to the cutting zone, which reduces heat build-up, improves insert life and supports consistent cutting conditions. By pairing this cutter with ADKT 10T3 indexable inserts, the system combines economical insert replacement with maintained process stability. Short cutting length and multiple edges for efficient material removal With a 35 mm cutting length and three cutting edges, the cutter balances metal removal rate and tool life: the multi-edge configuration spreads cutting forces across several teeth, lowering individual edge load and smoothing chip flow. The modest cutting length preserves stiffness while enabling modest stepovers and pocketing operations where rigidity is critical. The result is predictable productivity gains and reduced rework thanks to steady dimensional performance and predictable wear behaviour. Fast insert changes and workshop compatibility The tool uses standard screw fixation (Torx T8, screw M2.5x5.5) for secure and repeatable clamping of inserts, enabling quick exchange during shift changes and minimising downtime. Compatibility with Korloy ADKT 10T3 inserts offers access to a wide range of grades and geometries, allowing adaptation to different materials and cut conditions without replacing the body. The cutter’s compact mass (approx. 0.25 kg) and standard shank diameter facilitate use in common toolholders and CNC spindle interfaces, making it a flexible choice for many machining centres. For reliable integration or tailored advice on Teknik Makina’s 20 mm indexable end mill S077TM, contact Metav Werkzeuge for supply and technical guidance from Emmerich: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: S077TM Manufacturer: Teknik Makina Product: Indexable insert end mill Core technical data Diameter: 20 mm Shank diameter: 20 mm Total length: 100 mm Cutting length: 35 mm Number of cutting edges: 3 Weight: 0.25 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant For ADKT 10T3 indexable inserts Compatible insert manufacturer: Korloy FAQ Which inserts fit this cutter? This cutter accepts ADKT 10T3 indexable inserts; the body is compatible with Korloy-manufactured inserts in that size. Is the cutter coolant-fed? Yes, the tool features internal coolant, which supplies cutting fluid directly to the insert zone for improved thermal control and chip evacuation. What is the shank diameter and overall length? The tool has a 20 mm shank diameter and a 100 mm overall length. How many cutting edges does the tool have and what is the cutting length? The cutter is configured with three cutting edges and a 35 mm cutting length. Which screw and key are required for insert clamping? Insert clamping uses a Torx T8 key and screws sized M2.5x5.5. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable-insert cutter that combines firm clamping with a long effective cutting reach; the design delivers consistent chip control and reliable repeatability across series production. Order directly via Metav Werkzeuge or consult the Metav specialists for process-matched recommendations. Shank Cutter S776TM – Indexable-insert cutter, 20 mm shank, 30 mm cutting length (Teknik Cutting Tools) The Shank Cutter S776TM is a robust cutter body designed for milling with ANHX-series indexable inserts; it suits light to medium-duty roughing and finishing tasks in workshop and production settings. 20 mm shank diameter for secure clamping 30 mm effective cutting length Compatible with ANHX 1004-1206 inserts Torx fixing screw M3x7 with T8 key Stable clamping for repeatable results The central benefit of a 20 mm shank diameter is improved toolholder stability. A stiffer connection between spindle and tool significantly reduces vibration, which leads to more consistent surface finishes and longer insert life. The cutter's design keeps the insert seat rigid so that each pass maintains geometry; when paired with high-quality holders, the result is repeatable production rather than occasional rework. Efficient machining with an indexable system Equipped for ANHX 1004-1206 indexable inserts, the cutter enables rapid insert changes and predictable cutting behaviour. The two-flute configuration with a 90° cutting angle provides a balance between chip evacuation and axial engagement, so material removal remains efficient without excessive radial loading. For operations where setup time and tool-change speed matter, this approach reduces non-productive time and supports consistent cycle times. Practical compatibility and straightforward service Compatibility with inserts from Palbit and the supplied Torx fixing arrangement (screw M3x7, key T8) simplifies procurement and maintenance. The fixing system is familiar to workshop technicians and allows secure clamping of the insert with minimal torque. Regular inspection and correct screw torque restore clamp integrity quickly, offering low-maintenance uptime and predictable performance per shift. Designed for workshop-to-light-production environments With an overall length of 100 mm and a compact mass of 0.247 kg, the tool body is sized for flexible use in smaller spindles and manual setups as well as automated cells. The 30 mm cutting length grants a comfortable axial reach for stepped pockets and shoulder milling while keeping deflection low. For shops consolidating tool inventories, the indexable approach reduces total tooling costs by extending insert life and simplifying regrinding needs. Why this cutter benefits process planners By combining a stiff shank, an indexable-insert concept and straightforward fixing hardware, the configuration favours predictable machining results and easier tool management. Process engineers will value the ability to standardise on a cutter body that accepts widely available ANHX inserts, which streamlines stockkeeping and shortens procurement lead times. For tailored advice and procurement support from Metav Werkzeuge—rely on our specialists in Emmerich to match the S776TM to the machining task and to supply inserts or holders that suit the application. Technical data Article number: S776TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Compatible inserts: ANHX 1004-1206 Indexable Inserts Suitable insert maker: Palbit Facts Shank diameter: 20 mm Cutting length: 30 mm Overall length: 100 mm Number of cutting edges: 2 Weight: 0.247 kg Cutting angle: 90° Special features Torx fixing screw M3x7 Torx key size T8 For ANHX 1004 inserts Indexable-insert cutter body Compact, production-capable design FAQ What insert types fit this cutter? The cutter accepts ANHX 1004-1206 indexable inserts; compatibility is stated for ANHX 1004 series and extended sizes in the ANHX family. Is the shank diameter suited to standard collets and holders? Yes, the 20 mm shank diameter matches common 20 mm toolholders and collets, providing secure clamping for improved stability. How is the insert secured in the cutter body? Inserts are retained with a Torx fixing screw M3x7; the required key is T8, enabling quick and secure insert changes. Can this cutter be used for finishing operations? With its two-flute geometry and 90° cutting angle, the cutter is suitable for light finishing as well as roughing, depending on cutting data and insert grade. Which manufacturers supply compatible inserts? Palbit is listed as a compatible insert manufacturer; the cutter is designed to work with ANHX-format inserts from established suppliers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of reliable coolant feed, a rigid 20 mm shank and compatibility with APKT 1003 indexable inserts for steady productivity and low operating costs. Order this coolant-fed cutter body directly via Metav Werkzeuge or contact our specialists for tailored advice. Schaftfräser – shank milling cutter body with internal coolant, 20 mm shank (Teknik Makina) The Schaftfräser is a shank-mounted milling cutter body designed for use with APKT 1003 indexable inserts, engineered for workshop and light industrial milling where quick insert changes and coolant-fed cutting improve process stability. 20 mm shank diameter Internal coolant supply Compatible with APKT 1003 inserts Three cutting edges for stable cutting Improved tool life and surface quality through internal coolant The integrated internal coolant channel directs cutting fluid precisely to the cutting zone, reducing heat build-up and flushing chips away from the insert edge. This targeted cooling lowers thermal stress on the insert and cutting body, which results in longer insert life and more consistent surface finishes across batches. For shops aiming to reduce unplanned downtime, the coolant feed is a measurable enhancement: fewer thermal tool failures and a reduced need for early index changes translate into improved machine availability and predictable production output. Rigid shank and secure clamping for accurate, vibration‑resistant cuts A 20 mm shank combined with an overall length of 120 mm and a cutting length of 40 mm gives the tool a balanced stiffness-to-reach ratio. The three cutting edges contribute to smooth chip load distribution, reducing chatter and improving dimensional stability. Insert retention is secured with an M2.5x5.5 screw tightened with a Torx T8 key, ensuring consistent seating of APKT 1003 indexable inserts from manufacturers such as Korloy. The low mass (approx. 0.278 kg) further aids tool handling and changeover, making the cutter body practical for both short runs and repetitive production cycles. Economical, workshop-friendly design for efficient insert milling The indexable-insert concept keeps running costs low: worn edges are quickly rotated or replaced instead of replacing the whole cutter head, which yields immediate cost benefits for small and medium-sized workshops. The cutter body is intended for rapid insert changes and repeatable mounting, supporting lean workflows and reduced setup time. Supplied as a purpose-built tool body by Teknik Makina and identified as S166-1TM, it fits into existing tool holders for conventional milling machines and offers straightforward integration into standard machining processes. For complex material questions or process optimisation, technical assistance is available via Metav Werkzeuge to support selection and application. Contact Metav Werkzeuge today to request further technical details on Teknik Makina’s coolant-fed cutter body S166-1TM or to discuss matching APKT 1003 inserts for a reliable production setup — Metav Werkzeuge provides expert advice and fast supply from Emmerich. Technical specifications SKU: S166-1TM Product type: Shank milling cutter body Brand: Teknik Makina Facts Cutter diameter: 20 mm Shank diameter: 20 mm Overall length: 120 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.278 kg Special features Internal coolant For APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Insert screw: M2.5x5.5 Torx key size: T8 FAQ What insert types fit this cutter body? The cutter body accepts APKT 1003 indexable inserts, which are widely available and compatible with the S166-1TM from Teknik Makina. Is internal coolant supplied through the shank? Yes, the S166-1TM features an internal coolant channel that delivers fluid directly to the cutting zone to improve tool life and surface finish. Which torque tool is required for insert mounting? An appropriate Torx T8 key is required to tighten the M2.5x5.5 insert screw used with this cutter body. Is this tool suitable for short overhang applications? With a 20 mm shank and an overall length of 120 mm, the cutter body offers good rigidity for moderate overhangs while maintaining stability for accurate milling. Can Korloy inserts be fitted without modification? Yes, the tool is designed for compatibility with Korloy APKT 1003 inserts and standard mounting hardware as specified. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A robust, indexable shank milling cutter offering internal coolant and a 20 mm shank for stable clamping; its compatibility with APMT 11T3 inserts and Korloy tooling provides a flexible solution for heavy-duty face and shoulder milling. Order the cutter directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Shank milling cutter for APMT 11T3 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) The shank milling cutter for APMT 11T3 indexable inserts is designed for industrial face and shoulder milling where tool stability and effective cooling are essential *Compatibility with APMT 11T3 inserts *20 mm shank for rigid clamping *Internal coolant channels for chip evacuation *Torx T8 screw connection M2.5x5.5 Improved machining stability for consistent surface quality The tool body features a 20 mm shank and a compact cutting head that together reduce deflection during interrupted cuts, resulting in a more consistent surface finish and longer insert life. The robust interface and precise seating ensure repeatable clamping forces, which is especially valuable when milling shoulder faces or heavy engagement passes. Engineers and production planners benefit from predictable performance and fewer reworks thanks to the cutter’s structural design and balance. Optimised cooling and chip flow for higher productivity Equipped with internal coolant, coolant is delivered directly to the cutting zone for improved heat control and efficient chip evacuation. This targeted cooling reduces thermal wear on the inserts and helps maintain cutting-edge geometry under sustained loads. For workshops aiming to increase cycle time reliability, the internal coolant reduces the need for frequent tool changes and supports more stable cutting parameters in medium- to high-feed operations. Secure assembly and straightforward maintenance The cutter uses a Torx T8 screw and an M2.5x5.5 fastener for insert retention, providing a secure, repeatable clamp that simplifies insert changes and reduces set-up time. The indexable design accepts APMT 11T3 inserts supplied by Korloy, allowing immediate replacement without regrinding. Maintenance routines become quicker and less error-prone, supporting continuous production and lowering downtime associated with complex fastening systems. Versatile compatibility for workshop flexibility With a design focused on industrial milling tasks, the body accepts standard APMT 11T3 inserts from Korloy and others, enabling easy integration into existing tool inventories. The combination of a 20 mm shank, 210 mm overall length and a compact cutting head makes the tool suitable for a range of milling fixtures and machine spindle interfaces. For procurement teams, this compatibility reduces the number of special tools required and simplifies spare-part management. For technical specification advice or to secure Teknik Makina indexable milling cutters with internal coolant, contact Metav Werkzeuge for tailored recommendations and order placement. Technical data SKU: S234-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Core specifications Diameter: 20 mm Total length: 210 mm Shank diameter: 20 mm Cutting length (shank): 30 mm Number of cutting edges: 2 Weight: 0.523 kg Special features Internal coolant channels Compatible with APMT 11T3 indexable inserts Insert supplier: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ What inserts does this milling cutter accept? The cutter accepts APMT 11T3 indexable inserts; compatibility has been verified with Korloy inserts for consistent fit and performance. Is the coolant internal or external? The body is equipped with internal coolant channels that deliver cutting fluid directly to the cutting edge for improved heat control and chip evacuation. What is the shank diameter and overall length? The tool has a 20 mm shank and a total length of 210 mm, providing stable clamping and sufficient reach for many milling setups. How many cutting edges does the tool have? The milling body is configured with two cutting edges, designed to balance material removal rate and surface quality for face milling operations. Which fastener standard secures the inserts? Inserts are secured using a Torx T8 connection with an M2.5x5.5 screw for reliable mechanical clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com