Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of a robust 20 mm shank, reliable compatibility with 4NKT06 indexable inserts and a compact overall length of 120 mm for efficient, repeatable milling operations; order the Teknik Makina shank milling cutter directly via Metav Werkzeuge or consult our specialists for application matching. Teknik Makina Shank Milling Cutter S473TM — Ø20 mm, for 4NKT 0603 Indexable Inserts Teknik Makina Shank Milling Cutter S473TM is a compact shank-mounted milling solution designed for indexable insert milling with short cutting length applications. Shank Ø20 mm for stable clamping Three cutting edges for balanced cutting Compatible with 4NKT06 indexable inserts Torx M3x6.5 screw; key T8 included Consistent removal rates with a compact, rigid design The S473TM is engineered as a shank milling cutter with a 20 mm shank and a total length of 120 mm, offering a compact tool that reduces overhang and improves rigidity. Reduced deflection leads to steadier cutting conditions and consistent surface finish across repeated part runs. The combination of a short cutting length (25 mm) and a rigid shank suits operations where stability and tool life are priorities, such as finishing passes or light shoulder milling. The balanced three-flute geometry provides smooth chip evacuation while maintaining material removal rates, which helps to increase process reliability on CNC milling centres. Easy insert management and industry compatibility This indexable cutter accepts 4NKT06 inserts and is specified for use with Taegutec-style plates, enabling straightforward toolset standardisation in mixed fleets. Indexable inserts allow rapid edge changes and predictable tool costs: worn inserts are replaced rather than regrinding the tool body. The clamping system uses a Torx M3x6.5 screw secured with a T8 key, providing a reliable, repeatable insert seat that simplifies changeover procedures and reduces downtime. For buyers consolidating tooling platforms, the compatibility with widely used insert formats offers logistical advantages and faster maintenance routines. Application-focused benefits: predictable quality and operator convenience With three cutting edges and a compact geometry, the cutter delivers a compromise between high metal removal capability and smooth cutting behaviour. The design minimises vibration and supports controlled chip flow, which is particularly beneficial when machining steels and general-purpose alloys where tool stability affects dimensional accuracy. The tool’s modest weight of 0.306 kg and standard shank diameter facilitate secure clamping in conventional toolholders, enabling seamless integration into existing production setups without specialised arbors. For shops aiming to improve throughput without complex retooling, this cutter offers a pragmatic efficiency gain. Contact Metav Werkzeuge for tailored setup advice and secure the Teknik Makina shank milling cutter S473TM with Ø20 mm shank for immediate integration into production workflows Technical Data Article number: S473TM Manufacturer: Teknik Makina Product: Shank milling cutter for 4NKT 0603 indexable inserts Facts Shaft diameter: 20 mm Cutting length: 25 mm Overall length: 120 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.306 kg Torx screw: M3x6.5 Torx key: T8 Special features Compatible inserts: 4NKT06 Compatible insert manufacturer: Taegutec Indexable, replaceable cutting edges Compact shank for reduced overhang FAQ What inserts fit this cutter? The cutter is designed for 4NKT06 indexable inserts; compatibility with Taegutec-format plates is specified for straightforward replacement. Can this tool be used for finishing passes? Yes. With a short cutting length of 25 mm and a rigid 20 mm shank, the cutter is suitable for finishing operations that require stability and good surface quality. What clamping hardware is supplied? The tool uses a Torx M3x6.5 screw secured with a T8 key, providing a repeatable insert seat and easy insert changes. Is the S473TM suitable for long overhangs? The S473TM’s compact overall length (120 mm) and Ø20 mm shank are optimised to reduce deflection; extended overhangs should be avoided to maintain dimensional accuracy. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust stability and efficient coolant supply for consistent milling performance; the 20 mm shank and compatibility with ADKT 10T3 indexable inserts ensure straightforward integration into existing setups. Order the cutter directly via Metav Werkzeuge or consult our specialists for selection support. Shaft milling cutter S078TM — 20 mm shank, internal coolant (Teknik Makina) Shaft milling cutter S078TM designed as an indexable insert milling body for ADKT 10T3 inserts, offering a 20 mm shank and integrated internal coolant for demanding industrial milling tasks. 20 mm shank diameter Internal coolant supply Compatible with ADKT 10T3 inserts 200 mm overall length Stable machining with a compact shank for repeatable results The milling body delivers a rigid 20 mm shank that reduces vibration and improves surface finish during interrupted and continuous cuts. As a precision toolholder for ADKT 10T3 indexable inserts, the design prioritises concentricity and run-out control, which translates to fewer rejects and more predictable process windows. The modest mass of the assembly supports fast spindle acceleration without compromising stability, contributing to efficient cycle times and consistent repeatability across batches. Coolant-fed insert seat extends tool life and process reliability Integrated internal coolant routes cutting fluid directly to the cutting zone, improving chip evacuation and cutting-edge cooling at higher metal-removal rates. Direct coolant flow lowers edge temperatures and helps prevent build-up, which preserves insert geometry and reduces flank wear. In practice, this means longer tool life for the inserts and fewer unscheduled changeovers—an economical advantage for production runs that require sustained throughput. Quick maintenance and secure clamping for minimal downtime The cutter uses standard fixings for simple service: Torx T8 key compatibility and M2.5x5.5 fastening screws allow rapid insert changes and reliable clamp force. With three indexed cutting edges per position, users benefit from quick rotations of inserts to fresh cutting corners; the modest cutting-head length supports efficient access for maintenance tasks. These features reduce tool change time and make the assembly practical for busy workshop routines. Broad applicability and integration into existing tool systems Engineered to accept inserts from Korloy and conform to ADKT geometry, the tool body is a practical choice for shops standardised on indexable tooling. The 200 mm overall length and 35 mm cutting head length provide reach for a range of milling operations while keeping the tool assembly compact enough for tight setups. Where stable, coolant-assisted milling is required, this cutter delivers a balance of accessibility, performance and adaptation to common industrial toolholders. Contact Metav Werkzeuge for tailored application advice and fast delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S078TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Suitable for inserts: ADKT 10T3 Facts Shank diameter: 20 mm Overall length: 200 mm Cutting-head length: 35 mm Number of cutting edges: 3 Weight: 0.49 kg Special features Internal coolant Compatible insert supplier: Korloy Torx key: T8 Fastening screw: M2.5x5.5 FAQ What inserts fit this cutter? The shaft milling cutter accepts ADKT 10T3 indexable inserts and is specified for inserts from Korloy. Is the tool coolant-fed? Yes — the cutter features internal coolant to direct fluid to the cutting zone for improved chip control and longer insert life. How many cutting edges are available per position? The tool body accommodates positions with three cutting edges, allowing quick indexation for extended usage before replacement. Which shank diameter and overall length are specified? This cutter has a 20 mm shank and a 200 mm overall length, offering a compact yet capable configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid milling solution that combines a 20 mm shank, internal coolant and compatibility with ADKT 1204 indexable inserts for reliable chip control and consistent surface finish; order through Metav Werkzeuge or consult our specialists for application-specific guidance. Shaft milling cutter S051TM – 20 mm shank, internal coolant, for ADKT 1204 inserts (Teknik Makina) Shaft milling cutter S051TM designed for indexable-insert milling with ADKT 1204 inserts; built to provide rigid clamping, efficient coolant delivery and straightforward insert changes in production environments. Internal coolant for improved chip evacuation 20 mm shank for high clamping rigidity Compatible with ADKT 1204 inserts by Korloy High rigidity for steady, productive machining The compact design with a 20 mm shank delivers elevated rigidity, reducing vibration and enabling stable cutting even in interrupted cuts. A rigid connection between spindle and tool decreases deflection, which in turn improves dimensional repeatability and surface quality; the result is fewer reworks and a smoother production flow. The tool's balanced geometry is optimised for predictable behaviour in light-to-medium machining tasks, supporting consistent cycle times. Coolant integration that enhances tool life and surface finish Integrated internal coolant directs lubricant and coolant to the cutting zone, promoting efficient heat dissipation and improved chip control. By keeping the cutting edge cooler and flushing chips away from the insert seat, the tool reduces the risk of built-up edge and scoring. For operations where thermal stability and surface integrity matter, the coolant feed helps maintain longer insert life and steadier tolerances, lowering effective tooling costs per component. Flexible indexable-insert concept for quick servicing Designed for ADKT 1204 indexable inserts and compatible with Korloy inserts, the cutter uses a simple screw retention system (M3x7 with a T8 Torx key) for fast, repeatable insert changes. The two cutting edges arrangement balances cutting forces while offering a compact cutting zone; this makes insert replacement and reconditioning straightforward, reducing machine downtime and simplifying spare-part logistics for production schedules. Practical dimensions and workshop ergonomics With an overall length of 100 mm and a 35 mm cutting length, the tool fits confined setups while still offering adequate engagement for a variety of slotting and face-milling tasks. The modest weight supports easy handling at the tool crib and during changeover. Clear specification of the fastening parts and access via the T8 Torx key ensures routine maintenance is quick and safe, supporting continuous workshop throughput without complex procedures. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools S051TM and to discuss availability from Emmerich; technical consultants are ready to assist by phone or email. Technical data SKU: S051TM Product type: Shank milling cutter Compatible inserts: ADKT 1204 Suitable insert manufacturer: Korloy Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 100 mm Cutting length: 35 mm Number of cutting edges: 2 Weight: 0.192 kg Insert screw: M3x7 Torx key: T8 Special features Internal coolant Indexable-insert system Compact 100 mm length Compatible with Korloy ADKT 1204 inserts FAQ Which inserts fit this cutter? The S051TM accepts ADKT 1204 indexable inserts and is specified to work with Korloy-manufactured ADKT 1204 inserts for predictable fit and performance. How does the internal coolant affect performance? Internal coolant on the S051TM delivers fluid directly to the cutting edge, improving heat control and chip evacuation and thereby extending insert life and stabilising surface finish. What are the key dimensions to consider for fixturing? Important dimensions for setup are the 20 mm shank diameter and the 100 mm overall length; the 35 mm cutting length defines the maximum axial engagement. How are inserts secured and replaced? Inserts are secured with an M3x7 screw accessed by a T8 Torx key, allowing repeatable insert changes and straightforward maintenance. Is this cutter suitable for heavy roughing operations? The S051TM is optimised for rigid, stable machining with good chip control; for heavy roughing, assessment of cutting parameters and machine capability is advised to ensure optimal performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable-insert milling solution with internal coolant and a 20 mm shank for stable toolholding; the combination of coolant-fed performance and secure Torx fastening keeps cycle times low and tool life predictable. Order directly via Metav Werkzeuge or consult the specialists for application advice. Shank milling cutter S032-1TM – 20 mm shank with internal coolant (Teknik Makina) Shank milling cutter S032-1TM designed for slotting and face milling with APKT 1003 indexable inserts, suited to workshop and production environments 20 mm shank for stable toolholding Internal coolant for improved chip evacuation Compatible with APKT 1003 indexable inserts Secure Torx fastening M2.5x5.5, key T8 High-efficiency indexable-insert milling for consistent productivity The shank milling cutter delivers repeatable performance by combining a rigid 20 mm shank with a short, stiff overall design. Because the tool accepts APKT 1003 indexable inserts, toolchanging is swift and economical: worn edges are replaced instead of the entire cutter, reducing downtime. The three cutting edges support balanced cutting forces and uniform load distribution, which helps to reduce vibration and extend spindle life. For production runs where predictable cycle time and low per-part cost matter, this cutter is engineered to contribute directly to throughput improvements. Direct coolant feed and secure fastening for dependable machining Equipped with internal coolant, the tool channels cutting fluid to the cutting zone, improving chip evacuation and thermal control. This targeted coolant supply reduces built-up edge and helps maintain consistent surface finish on ferrous and non-ferrous materials. The insert is retained by a Torx screw M2.5x5.5 tightened with a T8 key, providing a repeatable and secure clamping interface that minimises the risk of chatter or insert movement under load. These features together support longer insert life and fewer unplanned stops, translating into measurable savings on consumables and machine hours. Seamless workshop integration and compatibility advantages Designed to accept inserts from established manufacturers, the cutter is compatible with YG-1-type APKT 1003 inserts, simplifying procurement and stockholding. The combination of a 100 mm overall length and a 30 mm cutting length makes the tool suitable for a range of common milling tasks where reach and rigidity must be balanced. Lightweight at 0.342 kg, the tool contributes minimal additional inertia while remaining robust in clamping. For engineering buyers and production planners, the cutter offers a pragmatic balance between flexibility, maintainability and operational reliability, supported by Metav’s distribution and technical advisory services. Contact Metav Werkzeuge for bespoke application advice on the Teknik Makina S032-1TM and to discuss compatible inserts or delivery options. Technical Data Article number: S032-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Internal coolant: yes Facts Shank diameter: 20 mm Overall length: 100 mm Cutting length: 30 mm Cutting edges: 3 Weight: 0.342 kg Torx screw: M2.5x5.5 Torx key: T8 ECLASS: 21180806 Special features Internal coolant feed Indexable-insert design Secure Torx fastening Suited for workshop and production use FAQ What types of inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts and is compatible with inserts from YG-1, enabling straightforward sourcing and replacement. Is the tool suitable for heavy roughing operations? The tool’s rigid 20 mm shank and three cutting edges offer good stability for moderate roughing; for heavy stock removal, assess fixture rigidity and spindle power alongside the Teknik Makina cutter’s specifications. How does the internal coolant benefit machining results? Internal coolant directed to the cutting zone improves chip evacuation and temperature control, which helps maintain consistent surface finish and insert life when using the S032-1TM. Which key and screw are required for insert changes? Insert retention uses a Torx screw M2.5x5.5, tightened or loosened with a T8 Torx key for reliable clamping. Can the cutter help reduce tooling costs? By using indexable inserts such as APKT 1003, the cutter reduces the need to replace whole tools; replacing individual insert edges lowers per-part tooling cost and downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable internal coolant, 20 mm shank rigidity, and compatibility with APKT 1003 indexable inserts to streamline milling operations and reduce setup time; order directly through Metav Werkzeuge or ask the consultants for compatibility guidance. Teknik Makina 20 mm shank milling cutter for APKT 1003 indexable inserts with internal coolant The Teknik Makina milling cutter for APKT 1003 indexable inserts is a shank-mounted indexable milling solution intended for precision material removal in industrial and workshop environments. 20 mm shank diameter Internal coolant supply Compatible with APKT 1003 Korloy inserts Overall length 100 mm Improved machining stability and consistent surface quality The cutter is built around a 20 mm shank and an overall length of 100 mm, which together provide a favourable balance between accessibility and stability. The solid shank diameter reduces vibration and runout, resulting in more consistent surface finish and extended insert life. By combining geometric stiffness with a compact length, the tool is well suited to short-to-medium overhang milling tasks where repeatability and dimensional control are priorities. Controlled cooling for higher material removal rates Equipped with internal coolant, the tool directs cutting fluid close to the cutting zone, which supports thermal control and chip evacuation during heavy or interrupted cuts. For workpieces that demand increased material removal, internal coolant aids in maintaining insert edge integrity and reduces the risk of heat-related wear. This targeted cooling enables higher sustained cutting parameters while protecting both the insert geometry and the workpiece microstructure. Versatile insert system and straightforward maintenance Designed for use with APKT 1003 indexable inserts from Korloy, the cutter accommodates a widely used insert form that simplifies inventory and tooling strategies. The three cutting edges configuration provides a balance between cutting economy and surface refinement. Fast insert changes are achieved using the supplied Torx fastening (T8) and M2.5×5.5 screw, making maintenance efficient and predictable for production environments where minimising downtime matters. Clear technical fit and workshop integration The tool’s specification—20 mm shank, 30 mm cutting length, and three cutting edges—matches common milling set-ups and collet/chuck systems without excessive modification. Where process planners require a dependable indexable solution that integrates with existing Korloy APKT insert stocks, this cutter provides straightforward compatibility and repeatable clamping. The modest mass and compact design also facilitate handling during tool change cycles. Request expert advice from Metav Werkzeuge to confirm fitment and availability of the Teknik Makina indexable milling cutter; contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical clarification or procurement assistance. Technical Data SKU: S144-1TM Product type: Indexable milling cutter Label: 20mm shank cutter APKT 1003 L100mm with internal coolant Manufacturer: Teknik Makina Facts Shank diameter: 20 mm Overall length: 100 mm Cutting length (shank-mounted): 30 mm Number of cutting edges: 3 Weight: 0.231 kg Torx key: T8 Torx screw: M2.5×5.5 Special features Internal coolant supply Compatible with APKT 1003 indexable inserts Suitable for Korloy APKT 1003 inserts FAQ What insert type is required for this cutter? The cutter is designed for APKT 1003 indexable inserts, compatible with Korloy APKT 1003 specifications and seating. Is internal coolant available and how does it help? Yes, the tool features internal coolant, which delivers fluid to the cutting zone to improve chip evacuation, reduce thermal wear and extend insert life. What are the key dimensional features to check before ordering? Confirm the 20 mm shank diameter, 100 mm overall length and the 30 mm cutting length to ensure correct clamping and sufficient reach for the intended application. How many cutting edges does the tool have and what is the benefit? The cutter has three cutting edges, offering a compromise between cutting economy and surface finish while enabling steady chip loads during milling. Which screw and key are used for insert fixation? Insert retention uses an M2.5×5.5 Torx screw, tightened with a T8 Torx key, facilitating quick and secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve reliable material removal with the combination of a 20 mm shank for stable clamping and internal coolant for consistent chip evacuation; the three cutting edges enable efficient engagement and smooth surface results. Order the insert milling cutter directly via Metav Werkzeuge or ask our consultants if needed. 20 mm shank milling cutter for APKT 1003 indexable inserts — internal coolant, L150 mm A 20 mm shank milling cutter designed for APKT 1003 indexable inserts, offering internal coolant and a 150 mm overall length for robust production and workshop milling tasks. 20 mm shank diameter Internal coolant for improved chip control Compatible with APKT 1003 inserts (YG-1) 60 mm cutting length for deeper engagement Stable clamping and efficient cutting for production use The tool combines a 20 mm shank with a 150 mm overall length to deliver a stable connection to the machine spindle, reducing vibration and improving repeatability. Fitted for APKT 1003 indexable inserts and configured with three cutting edges, the cutter is suited to medium-duty milling operations where stability and predictable tool life matter. The use of indexable inserts keeps tooling costs lower over time, as worn edges can be indexed or replaced without discarding the complete tool body. Internal coolant and secure insert retention for longer life Integrated internal coolant channels direct cutting fluid to the insert pocket, supporting effective heat dissipation and chip flushing at the cutting zone. This targeted cooling reduces thermal load on the insert and workpiece, helping to maintain cutting geometry and extend insert life. Insert retention is achieved with a Torx-mounted clamping screw (M2.5x5.5) driven with a T8 key, providing secure seating and simple serviceability during changeover or maintenance. Broad compatibility and streamlined maintenance to reduce downtime Designed to accept APKT 1003 indexable inserts and compatible with the YG-1 insert family, the cutter offers flexible material coverage for general workshop and light industrial applications. The arrangement of three cutting edges balances material removal rate with surface finish, and the accessible mounting system shortens changeover times. With a compact mass of 0.368 kg, the tool is easy to handle during setup while still providing the rigidity required for repeatable milling cycles. Contact Metav Werkzeuge today for supply and technical guidance on the Teknik Makina shank milling cutter S036-1TM; our consultants can advise on insert selection and machining parameters and are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: S036-1TM eClass: 21180806 Product type: Shank milling cutter Label: 20mm shank cutter APKT 1003 L150mm with internal coolant Facts Diameter: 20 mm Overall length: 150 mm Shank diameter: 20 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.368 kg Torx screw: M2.5x5.5 Torx key: T8 Special features Internal coolant For APKT 1003 indexable inserts Compatible insert manufacturer: YG-1 Three cutting edges for balanced engagement FAQ Which insert type fits this cutter? The cutter is designed for APKT 1003 indexable inserts and is compatible with inserts from YG-1 as specified for this shank milling cutter (SKU S036-1TM). Is internal coolant available and how does it help? Yes, the built-in internal coolant supplies cutting fluid directly to the insert pocket to assist chip evacuation and thermal control, which can improve insert life and process consistency for this Teknik Makina cutter. What is the cutting length and how does it affect machining? The tool offers a 60 mm cutting length, enabling deeper engagement per pass where machine and setup rigidity permit, while the 20 mm shank helps maintain clamping stability. How are the inserts secured and serviced? Inserts are secured with a Torx-mounted clamping screw (M2.5x5.5) tightened using a T8 key; this provides straightforward changeover and reliable retention during milling. For which applications is this cutter intended? This shank milling cutter is intended for general workshop and light industrial milling tasks where indexable inserts and internal coolant are advantageous for efficient chip control and repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility, internal coolant, and compact 20 mm shank design to maintain stable chip evacuation and consistent cycle times. Order the milling cutter directly via Metav Werkzeuge or consult the technical team for application-specific advice. Shank milling cutter S030-1TM — 20 mm shank, internal coolant (Teknik Makina) S030-1TM is a shank milling cutter designed for indexable insert applications, optimised for compact-diameter milling with APMT 0602 inserts 20 mm shank diameter Internal coolant for improved chip control Designed for APMT 0602 indexable inserts 30 mm cutting length for deeper passes Five cutting edges for balanced cutting High-efficiency machining through insert compatibility and coolant The design of the S030-1TM targets productivity in small-diameter milling: compatibility with APMT 0602 indexable inserts enables rapid insert changes and consistent cutting geometry, while the internal coolant channel supplies coolant directly to the cutting zone to assist chip evacuation and edge cooling. These features reduce cycle interruptions and support stable cutting forces, which is particularly useful where machine uptime and repeatable results are critical. The compact 20 mm shank keeps the tool rigid in tight setups and helps preserve spindle life. Secure clamping and service-friendly assembly for reliable shifts Five precisely positioned insert pockets provide a balanced cutting pattern that reduces vibration and extends insert life. The clamping system uses a T6 Torx key with M1.8x4.1 screws for reproducible torque and safe seating of each insert; this standardised fastening ensures repeatable clamping and quick replacement during shift changes. The arrangement supports repeatability in production batches and simplifies maintenance procedures without specialist tooling. Cutting engagement and application flexibility in confined setups With a 30 mm cutting length and overall length of 120 mm, the tool body allows deeper axial engagement while maintaining a compact envelope. The combination of cutting length and shank diameter makes the cutter suitable for a range of milling tasks where tool access is limited but axial depth is required. The modest mass (approx. 0.263 kg) contributes to lower centrifugal loads at moderate speeds, aiding dynamic stability in small‑diameter operations. Simplified procurement and supply-chain advantages for workshops Compatibility with Korloy-manufactured APMT 0602 inserts reduces the need for bespoke insert sourcing and supports fast replenishment. The shank milling cutter’s standardised fastening parts and common insert form factor allow workshop planners to keep fewer SKUs in stock while covering multiple part families. For further technical clarifications or application matching, Metav Werkzeuge provides targeted advice to align the cutter selection with machining strategy and production constraints. Contact Metav Werkzeuge for tailored procurement and technical guidance on the Teknik Makina S030-1TM with internal coolant to ensure the optimum setup for small-diameter milling tasks Technical data Article number: S030-1TM ECLASS: 21180806 Manufacturer: Teknik Makina Core specifications Diameter: 20 mm Overall length: 120 mm Shank diameter: 20 mm Cutting length: 30 mm Weight: 0.263 kg Number of cutting edges: 5 Materials & features Internal coolant: yes Compatible inserts: APMT 0602 Compatible insert manufacturer: Korloy Torx key: T6 Torx screw: M1.8x4.1 Product type: Shank milling cutter FAQ Which insert type fits this milling cutter? The cutter accepts APMT 0602 indexable inserts; Korloy inserts in that form factor are compatible with the S030-1TM. How is coolant delivered to the cutting zone? Coolant is supplied via the integrated internal coolant channel to the cutting area to assist chip control and edge cooling. How many cutting edges or inserts are fitted to the cutter body? The tool body is configured with five cutting edges, providing a balanced cutting pattern for improved stability. What are the shank size and overall length of the cutter? Shank diameter is 20 mm and overall length is 120 mm, with a cutting length of 30 mm. Which torque key and screw type are required for insert clamping? Insert clamping uses a T6 Torx key and M1.8x4.1 screws for reproducible fastening. Is the S030-1TM suitable for tight-access machining tasks? Yes, the combination of a 20 mm shank and a 30 mm cutting length makes the cutter well suited to confined milling operations where rigidity and axial engagement are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of its combination of 20 mm shank, internal coolant and compatibility with APMT 0602 indexable inserts, this cutter promotes stable machining and efficient chip control; order the tool directly via Metav Werkzeuge or consult our advisors for application support. Shank milling cutter S006-1TM — 20 mm shank, internal coolant (Teknik Makina) A Shank milling cutter S006-1TM designed for versatile milling operations using APMT 0602 indexable inserts, suitable for medium-duty finish and semi-roughing tasks where coolant-fed chip control and secure clamping are required. 20 mm shank diameter for secure clamping Internal coolant for improved chip evacuation Compatible with APMT 0602 indexable inserts 110 mm overall length, 30 mm cutting length Stable machining and enhanced process reliability The S006-1TM is engineered as an indexable insert milling cutter with a 20 mm shank and internal coolant channels to maintain cutting temperatures and reduce built-up edge formation. Internal feed reduces thermal load at the cutting zone, which extends insert life and supports consistent surface finish. Combining coolant delivery with a compact overall length results in improved chip evacuation, fewer interruptions for rework and reduced cycle-time variation—advantages that translate directly into predictable, efficient production runs. Secure clamping, quick insert changes and predictable results With a 30 mm cutting length and five cutting edges, the tool balances productive material removal and stability. The insert pocket and fastening use a T6 torx key and a M1.8x4.1 torx screw, enabling swift, repeatable insert changes and a reliable seat for each index. This reduces tool change downtime and contributes to reproducible part quality. The cutter is compatible with inserts from Korloy and accepts standard APMT 0602 grades, simplifying inventory and allowing the selection of coatings or substrates optimised for the workpiece material. Practical versatility for workshop and production environments Designed for routine integration into established toolsets, the holder supports a range of common machining tasks where coolant supply is available. The relatively light mass and compact form factor aid concentricity and minimise vibration on smaller machines while still delivering the rigidity needed for general milling. Supplied as a finished tool with a clear specification of 110 mm overall length and a weight of 0.241 kg, it is straightforward to assess balance, clamping requirements and toolholder compatibility during process planning, helping to streamline tool management in mixed-production environments. Contact Metav Werkzeuge for availability and tailored advice on Teknik Makina tooling; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S006-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Article description: for APMT 0602 indexable inserts Label: 20mm shank mill APMT 0602 L110mm with internal coolant Facts Diameter / shank: 20 mm Overall length: 110 mm Cutting length: 30 mm Number of cutting edges: 5 Weight: 0.241 kg Torx key: T6 Torx screw: M1,8x4,1 eClass: 21180806 Special features Internal coolant Compatible with APMT 0602 indexable inserts Suitable for Korloy inserts Indexable insert milling cutter design Compact form for improved concentricity FAQ What inserts fit this cutter? The shank milling cutter S006-1TM accepts APMT 0602 indexable inserts and is compatible with inserts from Korloy, allowing use of commonly available grades for finishing and semi-roughing. Is the tool suitable for through-coolant delivery? Yes, the tool features internal coolant channels to support through-coolant injection for improved chip control and extended insert life. How many cutting edges does the cutter have? The S006-1TM is configured with five cutting edges to balance material removal and stability during milling operations. Which fastening hardware is required for the inserts? Insert clamping uses a T6 torx key and M1.8x4.1 torx screw for secure and repeatable fastening of the APMT 0602 inserts. What are the critical dimensions to check for toolholder compatibility? Key dimensions are a 20 mm shank diameter, 110 mm overall length and 30 mm cutting length; verify toolholder clamping and projection against these values. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 20 mm shank with compatibility for APMT 11T3 indexable inserts delivers a balance of rigidity and productivity for indexable milling operations; the 100 mm overall length and three cutting edges support efficient chip evacuation and consistent results. Order directly via Metav Werkzeuge or ask their specialists for tailored technical advice. 20 mm shank milling cutter S233TM – indexable insert milling cutter for APMT 11T3 (Teknik Makina) A 20 mm shank milling cutter S233TM designed for industrial indexable-insert milling, offering reliable fixing for APMT 11T3 inserts and a compact 100 mm overall length for extended reach in standard machining setups. 20 mm shank diameter for rigid clamping Compatible with APMT 11T3 indexable inserts 100 mm overall length for extended reach Three cutting edges for efficient material removal Greater stability for consistent finishes The combination of a 20 mm shank and a compact geometry reduces run-out and vibration, which improves surface quality and extends insert life. With a mass of 0.278 kg, the cutter provides a stable centre of gravity for routine machining operations. The result is predictable tool performance and fewer interruptions for rework — a rational advantage for production environments aiming to keep cycles consistent and downtimes low. Improved productivity through optimised cutting geometry Designed around the APMT 11T3 insert system, the tool uses three cutting edges and a 30 mm cutting length to balance feed rates and chip control. This configuration supports steady chip evacuation and lower cutting forces when paired with appropriate inserts, enabling higher material removal rates in indexable milling tasks. The 100 mm overall length provides reach without compromising stiffness, which is especially useful for stepped or recessed features where access and rigidity must be balanced. Fast insert changes and secure fixing Insert replacement is straightforward thanks to the dedicated fixing hardware: a Torx T8 key secures inserts with an M2.5x5.5 screw, ensuring quick, repeatable clamping with minimal adjustment time. The cutter is compatible with Korloy APMT 11T3 inserts, allowing flexibility in grade selection for a wide range of applications. Supplied dimensions and standardized fixing mean predictable set-up times and simplified tool inventory management on the shop floor. Contact Metav Werkzeuge today for precise ordering and technical consultation on integrating the Teknik Makina S233TM into production — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S233TM Product: Shank milling cutter Brand: Teknik Makina Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Label: 20mm Schaftfräser APMT 11T3 L100mm eClass: 21180806 Dimensions / Core data Diameter: 20 mm Overall length: 100 mm Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 3 Weight: 0.278 kg Torx key: T8 Fixing screw: M2.5x5.5 Special features For APMT 11T3 indexable inserts Compatible with Korloy inserts Indexable insert fixing via Torx screw SKU: S233TM FAQ How many cutting edges does the tool have? The S233TM shank milling cutter is supplied with three cutting edges, providing a balance between efficient material removal and smooth cutting forces. Which indexable inserts fit this cutter? This cutter accepts APMT 11T3 indexable inserts and is specified to work with Korloy grades, allowing selection of coatings and grades for different materials and cutting conditions. What are the key dimensions to note for setup? Key dimensions are: 20 mm diameter, 100 mm overall length and a 30 mm cutting length; the tool weight is 0.278 kg, which helps when checking toolholder balance and reach. How are the inserts secured? Inserts are fastened with a Torx T8 screw, using an M2.5x5.5 fixing screw, ensuring rapid, repeatable clamping and straightforward insert changes. Is this cutter suitable for extended reach applications? With a 100 mm overall length and a 20 mm shank, the design provides extra reach while maintaining sufficient rigidity for many standard indexable milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine internal coolant, a 20 mm shank and compatibility with APMT 11T3 indexable inserts for dependable, repeatable machining in production environments. Robust Torx-clamped insert mounting and a 100 mm overall length make the tool well suited to compact setups; order the shank milling cutter directly via Metav Werkzeuge or consult our technical team if required. Shank milling cutter for APMT 11T3 indexable inserts — 20 mm shank, internal coolant (Teknik Makina) A shank milling cutter designed for coolant-fed milling and secure insert clamping in general cutting-tool applications. 20 mm shank diameter for solid mounting Internal coolant for improved chip removal Compatible with APMT 11T3 indexable inserts Torx T8 clamping screw M2.5x5.5 Enhanced coolant control for stable machining The integrated internal coolant channel delivers cutting fluid directly to the cutting zone, improving chip evacuation and reducing heat at the contact point. This leads to more consistent cutting conditions and helps to maintain tool geometry for longer intervals between indexings, translating into fewer interruptions on the shop floor and improved process reliability. The coolant feed complements the cutter’s compact design to support stable feeds and speeds in shorter overhang setups. Secure clamping and proven insert compatibility With a 20 mm shank and Torx-secured insert fastening, the design prioritises repeatable seating and mechanical stability. The cutter accepts APMT 11T3 indexable inserts and is matched to Korloy insert variants, enabling fast index changes and straightforward inventory management. The Torx T8 screw (M2.5x5.5) secures the insert with defined torque characteristics, reducing movement under load and improving surface finish consistency in production runs. Compact geometry for reliable tool engagement The combination of a 100 mm overall length and a 30 mm cutting length limits overhang while still providing useful reach for many milling tasks. Together with two cutting edges, the cutter offers a balance between chip load capacity and low radial forces, which helps to reduce vibration and improve finish quality on interrupted cuts. The moderate cutting length supports rigidity, making the tool a good choice for operations where stability and repeatability are priorities. Practical integration into workshop workflows The cutter’s straightforward interface with common insert sizes and a standard shank diameter simplifies toolholder selection and fixture planning. Replacement inserts are indexed quickly and the defined clamping method supports consistent set-up times across tool changes. For complex specifications or to confirm fitment with existing holders, Metav Werkzeuge’s technical advisors are available to provide data or recommend matching toolholders and inserts to streamline procurement and minimise downtime. For ordering, technical queries or assistance with application matching for the Teknik Makina shank milling cutter (SKU S232-1TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration into the production process Technical data Article number: S232-1TM ECLASS: 21180806 Manufacturer: Teknik Makina Product type: Shank milling cutter Core dimensions Diameter: 20 mm Overall length: 100 mm Shank diameter: 20 mm Cutting length (shank): 30 mm Number of cutting edges: 2 Weight: 0.243 kg Special features Internal coolant channel Compatible with APMT 11T3 indexable inserts Compatible insert manufacturer: Korloy Torx key size: T8 Torx screw size: M2.5x5.5 FAQ Which inserts fit this cutter? The cutter accepts APMT 11T3 indexable inserts; Korloy inserts in this size are compatible with the clamping seat. Is the tool coolant-fed? Yes, the shank milling cutter features an internal coolant channel to supply cutting fluid directly to the cutting edge. What is the shank diameter and overall length? The tool has a 20 mm shank diameter and a 100 mm overall length (SKU S232-1TM). How many cutting edges does the cutter have? The cutter is supplied with two cutting edges, balancing chip evacuation and surface finish. Which Torx key and screw are required for insert clamping? Insert clamping uses a Torx T8 key and a M2.5x5.5 Torx screw for secure fastening. Is the cutter suitable for compact toolholders? The 20 mm shank and standard interface make it compatible with common toolholders designed for that shank size; consult Metav Werkzeuge for holder recommendations. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from reliable, indexable-insert milling that combines a 20 mm shank with three robust cutting edges and direct compatibility with APXT 1003 inserts; order this solution directly via Metav Werkzeuge or consult the technical team for application advice. Shank Cutter S144TM – insert milling body, 20 mm shank, for APXT 1003 indexable inserts (Teknik Makina) The Shank Cutter S144TM is an indexable-insert milling body engineered for shoulder and face milling where quick insert changes and process stability are required, compatible with APXT 1003 inserts for efficient production work 20 mm shank diameter Compatible with APXT 1003 indexable inserts Three cutting edges for stable machining Overall length 100 mm Precise fit and reliable compatibility for indexable-insert milling The S144TM body is designed around a 20 mm shank, providing rigid clamping and reduced runout compared with slimmer holders. Compatibility with APXT 1003 indexable inserts and recognised Korloy grades enables fast insert replacement and predictable tool life, which contributes directly to lower downtime and consistent surface finish. The assembly is secured with a Torx screw M2.5×5.5, tightened with a T8 key, simplifying on-machine maintenance and tool changes while maintaining repeatable seating of each insert. Stable cutting geometry that improves cycle times A three-cutting-edge configuration paired with a 90° cutting angle gives a balance of material removal capacity and surface quality, especially for shoulder milling and light facework. The 30 mm cutting length and symmetric insert arrangement permit stable feeds and reduced vibration, which often leads to shorter cycle times in repetitive operations. Selecting a cutter body that accepts indexable inserts reduces the expense of full-tool replacement and allows the machining strategy to focus on productivity and cost-efficiency. Workshop practicality and safe handling With an overall length of 100 mm and modest mass of 0.231 kg, the tool body is compact and easy to handle during setup and changeover. The indexable concept makes inserts the wearing component; the tool body itself requires minimal servicing, supporting lean workshop practices. The use of a standard Torx fastening method ensures compatibility with common toolkits and a secure clamping interface, promoting operator confidence and consistent seating torque across multiple insert changes. Suitability across machining tasks and materials Designed for flexible integration into milling workflows, this milling body suits a range of general-purpose applications where APXT 1003 inserts are recommended. The combination of rigid 20 mm shank, insert-based regrindability and clearly defined fixing hardware enables stable performance in conventional CNC equipment and reduces the need for multiple full-profile cutters, thereby simplifying inventory and tool management. For reliable supply from the Metav Werkzeuge European warehouse and technical consultation on integrating the Teknik Makina S144TM into specific machining processes, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930; order via Metav Werkzeuge for assured availability and expert advice. Technical Data Article number: S144TM Manufacturer: Teknik Makina Designation: Shank cutter for APXT 1003 indexable inserts Facts Shank diameter: 20 mm Cutting length: 30 mm Overall length: 100 mm Diameter: 20 mm Number of cutting edges: 3 Weight: 0.231 kg Cutting angle: 90° Torx screw: M2.5×5.5 Torx key: T8 Special features Compatible with APXT 1003 indexable inserts Suitable for Korloy inserts Indexable-insert milling body Quick insert replacement via Torx fastening FAQ What inserts fit this milling body? The S144TM is specified for APXT 1003 indexable inserts; Korloy grades matching that index are compatible and commonly used with this cutter body. How is the insert secured in the cutter body? Inserts are secured by a Torx screw M2.5×5.5, tightened with a T8 key, ensuring repeatable clamping and simple replacement. What machining tasks is the cutter body designed for? This indexable-insert milling body is intended for shoulder and face milling where a 90° cutting angle and stable, repeatable performance are required. Does the tool require frequent servicing? The body itself is low-maintenance; wear is concentrated on the indexable inserts, which can be replaced individually to extend service intervals. Is the cutter suitable for automated tool change systems? The compact 100 mm overall length and standardised 20 mm shank make the body compatible with many CNC holders and automated tool systems, provided the machine accepts a 20 mm shank diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Comprehensive Technical Specifications: Order Number: S834TM Item: End Mill usable with XNKT 0604 Indexable Inserts of Korloy Brand: Teknik Makina Metric Information: Diameter: 20mm Cutting Edges: 2 Weight: 0.365kg Total length: 150mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the combination of a 20 mm shank, internal coolant and five cutting edges for stable clamping, consistent chip control and efficient material removal — order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S092TM — 20 mm shank, internal coolant, for LNMX 0402 indexable inserts (Teknik Makina) The Shank milling cutter S092TM is a precision tool designed for insert-based milling with LNMX 0402 indexable inserts; it combines a compact 20 mm shank with internal coolant delivery to support consistent machining performance. 20 mm shank diameter for stable clamping Internal coolant for improved chip evacuation 5 cutting edges for smooth material removal Compatible with LNMX 0402 inserts (Korloy) Consistent performance through optimised geometry The tool body and flute design deliver repeatable cutting conditions with a focus on process reliability. The combination of a 20 mm shank and five flutes provides a favourable balance between rigidity and cutting engagement, helping to reduce vibration during operation. With an 80 mm cutting length and a total length of 200 mm, the geometry is well suited to many standard holder systems while maintaining stability. These parameters help to achieve steady feed rates and consistent surface quality in insert milling operations. Improved cooling and chip control for longer tool life Internal coolant routing supplies cutting fluid directly to the cutting zone, supporting heat dissipation and chip evacuation. This internal delivery reduces the risk of built-up edge and assists insert performance under continuous cutting, so insert wear is more predictable. The built-in coolant functionality is particularly beneficial when working on longer passes or interrupted cuts, as it promotes heat management and helps maintain the cutting edge condition of LNMX 0402 inserts from compatible makers such as Korloy. Practical clamping and maintenance details Insert fastening uses a Torx system for secure and repeatable assembly: Torx T6 key and a M1,8x4,1 screw allow straightforward insert changes and reliable clamping torque. The cutter accepts standard LNMX 0402 indexable inserts, which simplifies stockkeeping and reduces machine downtime when replacements are needed. At a nominal weight of 0.4 kg, the tool is easy to handle when fitting into holders, while the solid shank diameter supports accurate concentricity and safe engagement in collets or shell mill holders. Reliable sourcing and workshop support Sourced from Teknik Makina and available through Metav Werkzeuge, this cutter benefits from distribution that emphasises quality control and traceability. Metav’s European hub in Emmerich acts as a quality filter and logistics centre, supporting workshops and production facilities with consistent availability. For engineering teams seeking predictable performance and compatible insert systems, the package of internal coolant, stable shank design and established insert format reduces procurement complexity and supports continuous production. Contact Metav Werkzeuge for tailored guidance on the S092TM shank milling cutter, request detailed technical drawings or confirm availability by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: S092TM Product type: Shank milling cutter Brand: Teknik Makina Numbers / Core technical data Diameter: 20 mm Total length: 200 mm Shank diameter: 20 mm Cutting length: 80 mm Number of cutting edges: 5 Weight: 0.4 kg Torx key: T6 Torx screw: M1,8x4,1 Designs / Special features Internal coolant For LNMX 0402 indexable inserts Compatible insert manufacturer: Korloy FAQ What insert type does this cutter use? The cutter accepts LNMX 0402 indexable inserts; the geometry is tailored for this insert format and compatibility with Korloy inserts is specified for the S092TM shank milling cutter. Is the tool supplied with coolant through the body? Yes, the tool features internal coolant channels to deliver cutting fluid directly to the cutting zone, which supports chip evacuation and thermal control. Which screw and key are required to secure inserts? Insert clamping uses a M1,8x4,1 screw tightened with a Torx T6 key for reliable, repeatable fastening of LNMX 0402 inserts. What are the main dimensions to consider when selecting holders? Key dimensions are the 20 mm shank diameter, 80 mm cutting length and 200 mm total length — these should be matched with the machine holder’s clamping capacity and reach. Who manufactures the cutter and who is responsible for distribution? The cutter is produced by Teknik Makina and distributed via Metav Werkzeuge; the SKU for reference is S092TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high clamping stability, integrated coolant and proven compatibility with LNMX 0603 inserts to maintain consistent cycle times and reduced tool-change downtime. Order directly via Metav Werkzeuge or consult our technical advisers for matching inserts and holder setup. Indexable end mill for LNMX 0603 — 20 mm shank, internal coolant (Teknik Makina) The Indexable end mill for LNMX 0603 indexable inserts is designed for secure, repeatable milling operations with internal coolant and a rigid 20 mm shank. 20 mm shank diameter for stable clamping Internal coolant feed for improved chip evacuation Compatible with LNMX 0603 inserts by Korloy Stability and accuracy for repeatable production The combination of a 20 mm shank and a robust body provides the rigidity required for steady cutting forces and reduced runout. The tool's 3 cutting edges distribute load evenly, which helps to produce consistent surface finish and extends insert life under cyclic conditions. The model marked S285-2TM has been engineered to keep vibration low during indexing changes, supporting predictable machining tolerances and fewer rejected parts. Cooling and maintenance that save time on the shop floor Built-in internal coolant directs fluid directly to the cutting zone, improving chip control and thermal management during extended cycles. This targeted cooling reduces thermal distortion and can lengthen the service intervals for inserts. The cutter accepts LNMX 0603 indexable inserts (compatible with Korloy), and insert retention is secured with a Torx screw requiring a Torx T8 key and M3x7 screw—items commonly found in maintenance kits—allowing fast, straightforward insert changes and minimal downtime. Dimensions and handling tailored for production workflows With a 200 mm overall length and an 80 mm cutting length, the tool suits medium-reach milling tasks where balance between reach and rigidity is required. At approximately 0.4 kg, the assembly is manageable for manual handling and automated tool changers alike. The design supports systematic tool management: predictable geometry, quick insert swaps and straightforward identification on the tool list all help to reduce setup time and maintain throughput in batch production. For procurement or to confirm compatibility with existing setups, contact Metav Werkzeuge for a personalised recommendation and reliable supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: S285-2TM Manufacturer: Teknik Makina Product type: Indexable end mill Compatible inserts: LNMX 0603 (Korloy) Facts Diameter: 20 mm Overall length: 200 mm Shank diameter: 20 mm Cutting length: 80 mm Cutting edges: 3 Weight: 0.4 kg Torx key: T8 Torx screw: M3x7 Special features Internal coolant Designed for indexable inserts Compatible with Korloy LNMX 0603 inserts FAQ What insert type fits this cutter? The tool accepts LNMX 0603 indexable inserts; the cutter is supplied to accommodate that insert form and seat geometry. Is the coolant internal or external? This cutter features internal coolant, which supplies cutting fluid directly to the cutting zone for improved chip evacuation. Which toolholder shank size is required? The cutter uses a 20 mm shank diameter, compatible with toolholders and collets designed for a 20 mm shank. How many cutting edges does the tool have? The design incorporates 3 cutting edges, offering balanced load distribution during milling. What is the overall and cutting length of the tool? The tool has a 200 mm overall length and an 80 mm cutting length, suited to medium-reach operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise indexable milling with controlled cooling and secure clamping: the combination of a 20 mm shank, internal coolant and compatibility with LNMX 0603 inserts ensures consistent cycle times and straightforward insert changes. Order the tool directly via Metav Werkzeuge or consult our specialists for application support. Indexable end mill body S285-1TM — 20 mm shank, internal coolant (Teknik Makina) The Indexable end mill body S285-1TM is an insert-holder designed for LNMX 0603 indexable inserts, providing productive peripheral and slot milling in standard machining operations *20 mm shank diameter *Internal coolant supply *Compatible with LNMX 0603 Korloy inserts *130 mm overall length Precise compatibility for reliable indexable milling The holder is engineered for defined insert geometry and repeatable seating to deliver stable cutting results. With support for LNMX 0603 indexable inserts, the tool body ensures accurate insert positioning and consistent cutting geometry across cycles. The combination of a 20 mm shank and a 130 mm overall length provides a balance between rigidity and reach, reducing chatter in typical milling setups. For production planning, the secure fit and standardised insert clamping reduce downtime during index changes, resulting in measurable productivity gains. Controlled cooling and sustained cutting performance Integral coolant channels feed cutting fluid directly to the insert rake zone, improving chip evacuation and temperature management. The internal coolant supply lowers cutting temperatures and extends insert life, especially under continuous or semi-continuous cutting loads. With 3 cutting edges and a 50 mm cutting length, the design supports moderate axial engagement while maintaining chip control. Explaining the effect plainly: directing coolant to the cutting edge reduces thermal wear and enables more consistent surface finish, which is particularly useful for medium-duty finishing and roughing operations. Practical handling and workshop serviceability Assembly and service use common workshop tools: the insert clamp is secured with an M3x7 Torx screw and adjusted using the T8 Torx key, allowing quick insert replacement without specialised equipment. The compact mass (approx. 0.325 kg) and standard 20 mm shank make the holder compatible with many toolholders and milling spindles. The component’s geometry supports safe seating of LNMX 0603 inserts from Korloy, so replacement parts are widely available. For inventory and traceability, the item is listed as S285-1TM and manufactured by Teknik Makina, making procurement and reorders straightforward. For tailored selection advice and to check stock availability of the Teknik Makina indexable end mill body, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and swift delivery Technical data SKU: S285-1TM Manufacturer: Teknik Makina Suitable for inserts: LNMX 0603 Compatible insert supplier: Korloy Facts Diameter: 20 mm Overall length: 130 mm Shank diameter: 20 mm Cutting length: 50 mm Weight: 0.325 kg Cutting edges: 3 Special features Internal coolant supply Torx screw: M3x7 Torx key: T8 Indexable cutter body for LNMX 0603 inserts FAQ What inserts fit this tool body? The tool accepts LNMX 0603 indexable inserts; the holder is compatible with LNMX 0603 inserts supplied by Korloy. Is the coolant routed internally? Yes, the tool features internal coolant channels to direct fluid to the cutting zone for improved chip evacuation and tool life. Which fastener and key are required for insert changes? Insert clamping uses an M3x7 Torx screw, typically adjusted with a T8 Torx key. What are the main dimensions for setup planning? Key dimensions are 20 mm shank diameter and 130 mm overall length; the cutting length is 50 mm. How is the tool identified for reordering? The item is listed under SKU S285-1TM and is supplied by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise combination of a 20 mm shank and 2 cutting edges for reliable, repeatable milling results; the tool’s LNMX 1006 compatibility and secure Torx clamping reduce setup time and tool change interruptions. Order the shank mill directly via Metav Werkzeuge or consult our experts for a tailored recommendation. Shank mill LN099TM — 20 mm shank, 2 cutting edges, Teknik Makina The Shank mill is a robust cutter designed for use with LNMX indexable inserts, delivering straightforward insert changes and consistent shoulder milling in industrial production environments 20 mm shank diameter for rigid clamping Compatible with LNMX 1006 Korloy inserts Two cutting edges for efficient material removal M3x7 Torx clamping screw with T8 key required High rigidity for consistent, repeatable machining results The tool’s 20 mm shank and 120 mm overall length provide a stable connection to the spindle, which reduces vibration and runout during operation. This rigidity translates into improved edge life of the insert and more consistent surface finishes, especially when carrying out shoulder milling or light facing operations. The combination of a solid shank diameter and compact overall geometry makes the cutter well suited to shop-floor setups where repeatability matters and where minimising rework is a priority. Quick insert changes and secure clamping reduce downtime Designed for indexable insert technology, the cutter accepts LNMX 1006 inserts and is compatible with Korloy plate geometries, simplifying procurement and inventory. With 2 cutting edges and a 90° cutting angle, the tool offers predictable engagement and chip formation. Insert retention uses an M3x7 Torx screw, tightened with a T8 key, which ensures reliable clamping and fast exchange times on the machine, lowering non-productive time and supporting higher machine utilisation. Practical handling and workshop benefits for everyday use Weighing 0.292 kg, the milling cutter is easy to handle during tool changes and setup. The cutter’s modest weight, combined with its defined cutting length of 25 mm, allows for controlled axial penetration and predictable cutting behaviour. The simple, indexable design reduces tooling complexity in the tool crib and makes replacement straightforward. For procurement and traceability, use SKU LN099TM when ordering or enquiring about identical replacements. For reliable supply and practical advice, request the Teknik Cutting Tools shank mill LN099TM via Metav Werkzeuge — Metav’s team in Emmerich will assist with availability and technical matching at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: LN099TM Manufacturer: Teknik Makina Type: Shank mill for LNMX indexable inserts Dimensions & Performance Shank diameter: 20 mm Cutting length (shank): 25 mm Overall length: 120 mm Cutting edges: 2 Cutting angle: 90° Weight: 0.292 kg Compatibility & Special Features Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key: T8 Intended for indexable insert milling FAQ Which inserts fit this cutter? The cutter accepts LNMX 1006 indexable inserts; compatibility with Korloy plate geometries is specified for straightforward sourcing and inventory planning. How is the insert secured in place? Insert clamping is via an M3x7 Torx screw, which requires a T8 key for tightening and removal to ensure secure and repeatable retention. What does the 90° cutting angle mean in practice? A 90° cutting angle provides a square shoulder capability, making the tool suitable for facing and shoulder milling where a defined corner and stable engagement are required. Is the cutter suitable for high-speed operations? The design focuses on rigidity and reliable insert retention; machining parameters should be chosen according to the insert specifications and machine capability rather than assuming universal high-speed suitability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision and compatibility: the tool's 20 mm shank and 50 mm cutting length deliver stable, repeatable milling with Sandvik indexable inserts, while secure Torx fastening reduces downtime. Order the tool directly via Metav Werkzeuge or consult our specialists for integration support. Shank cutter for R390-11T3 indexable inserts — compact, rigid milling with Sandvik compatibility Shank cutter for R390-11T3 indexable inserts designed for secure clamping and precise face or slot milling where R390-11T3 inserts are specified 20 mm shank diameter 50 mm cutting length Compatible with Sandvik R390-11T3 inserts Three cutting edges for stable milling Greater process stability through a compact, rigid design The combination of a 20 mm shank and a balanced 200 mm overall length offers a high level of rigidity that reduces vibration during cutting, directly improving surface finish and tool life. With a 50 mm cutting length and a 90° cutting angle, the tool is engineered for repeatable material removal in operations that demand consistent geometry. Using indexable inserts such as the R390-11T3 eliminates regrinding and simplifies maintenance, translating technical features into measurable time savings on the shop floor. Fast insert changes and secure clamping cut downtime Maintenance and insert replacement are simplified by the Torx screw M2.5x5.5 and the compatible T8 key, ensuring repeatable clamping torque and reduced setup error. The cutter’s three cutting edges distribute cutting forces evenly, which lowers the risk of premature insert failure and keeps machines productive for longer. These practical design elements support a rational investment case: fewer interruptions, predictable maintenance cycles, and reduced tooling inventory when standardised on widely available inserts. Integrates seamlessly into existing tooling systems Designed around the widespread R390 series, the tool allows shops to keep a compact insert inventory while benefiting from a proven insert geometry by Sandvik. The combination of standard interfaces and a familiar fastening system enables quick retrofitting into existing holders and toolpaths. For production planners, this means faster changeovers and improved throughput without the need for specialised holders or bespoke adjustments — a clear operational advantage in mixed-production environments. Practical reliability for everyday workshop use Weighing 0.48 kg and finished to industry tolerances, the cutter offers a practical balance between handling convenience and machining robustness. The apparent simplicity of the tool belies careful engineering: a standardised connection to commonly used inserts provides peace of mind and predictable performance in repetitive milling tasks. Where traceability and repeatability matter, this combination of features supports consistent component quality and fewer unexpected rejects. For quick integration of Teknik Makina tooling into existing workflows, contact Metav Werkzeuge for tailored advice and assured supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S596TM Manufacturer: Teknik Makina Product: Shank cutter for R390-11T3 indexable inserts Compatible inserts: R390-11T3 (Sandvik) Torx screw: M2.5x5.5 Torx key: T8 eClass: 21180806 ETIM: EC011860 Core measurements Shank diameter: 20 mm Cutting length (shank): 50 mm Overall length: 200 mm Diameter: 20 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.48 kg Features Compatible with Sandvik R390-11T3 indexable inserts Torx fastening for secure insert clamping Three cutting edges for balanced cutting forces Standard interface for simple integration SKU: S596TM FAQ Which inserts fit this cutter? The shank cutter is designed for the R390-11T3 indexable inserts; compatibility with Sandvik inserts is specified in the technical data. What is the shank diameter and overall length? Shank diameter is 20 mm and overall length is 200 mm, as stated in the product specifications. How many cutting edges does the tool have and what is the cutting angle? The tool has three cutting edges and a 90° cutting angle for stable face and slot milling. How are inserts secured and which tool is required for changes? Inserts are clamped using a Torx screw M2.5x5.5; a T8 key is required for secure insert changes. Is this cutter suitable for integration into existing tool setups? Yes — its standardised interface and compatibility with R390-11T3 inserts allow straightforward integration into holders and workflows that accept Sandvik-style indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 20 mm shank and a 130 mm overall length combined with compatibility for RPMW 0803 indexable inserts to keep production running with predictable performance; order directly via Metav Werkzeuge or consult our specialists for application advice. R312TM shaft cutter – 20 mm diameter, for RPMW 0803 indexable inserts (Teknik Makina) A robust R312TM shaft cutter designed for use with RPMW 0803 indexable inserts, engineered to support secure clamping and straightforward insert replacement in industrial milling operations 20 mm shank for secure toolholding Compatible with RPMW 0803 inserts Three cutting edges for balanced removal Torx M3x7 clamping with T8 key Increased rigidity for consistent machining results A solid 20 mm shank and a 20 mm body diameter provide enhanced stiffness during cutting, which reduces vibration and improves surface quality. The larger shank diameter stabilises the toolholder interface and helps maintain concentricity under load, resulting in more predictable tool life and fewer rejects. For operations where stability is critical, this rigidity translates into reduced set-up frequency and more efficient cycle times. Quick insert changes and reliable clamping Clamping is achieved with a Torx M3x7 screw that uses a T8 key, offering a compact and secure fastening method for RPMW 0803 inserts. The standardised screw interface simplifies maintenance and shortens downtime when inserts need replacing or indexing. Compatibility with Korloy RPMW 0803 inserts ensures easy procurement of cutting edges, while the Torx drive reduces the risk of screw cam‑out compared with non‑specialist fasteners. Balanced cutting performance with optimised geometry Equipped with three cutting edges, the tool body provides a balance between material removal rate and load distribution. The tri‑edge arrangement promotes steady chip formation and smoother tool engagement, which supports consistent cutting forces and reduces peak loads on each insert. With an overall length of 130 mm, the design offers useful reach while limiting deflection; the combination of length and geometry is suited to many milling setups where access and stiffness must be balanced. Seamless integration into production workflows Designed as a cutter body for RPMW 0803 indexable inserts, this product fits standard 20 mm toolholders and is suitable for systematic replacement strategies in production environments. Clear specifications and a standardised clamping system make the unit straightforward to catalogue and stock. When paired with Metav’s supply and consulting services, procurement and spare‑part planning become part of a reliable workflow that supports predictable delivery and traceable quality. Contact Metav Werkzeuge today for tailored advice on Teknik Makina cutters and to confirm the best insert and holder pairing for a given application; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: R312TM Product name: Shaft cutter for RPMW 0803 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 20 mm Shank diameter: 20 mm Overall length: 130 mm Cutting edges: 3 Special features Torx clamping screw M3x7 Torx key size T8 Compatible inserts: RPMW 0803 (Korloy) eCl@ss: 21180806 ETIM: EC011860 FAQ How does this cutter secure the indexable inserts? Clamping is effected by a Torx M3x7 screw; the screw is driven with a T8 key to lock RPMW 0803 inserts securely in place on the cutter body. Which insert type is compatible with this tool body? The cutter is designed for RPMW 0803 indexable inserts, compatible with inserts from Korloy and other suppliers offering that insert format. What are the key dimensions of the tool? The tool has a diameter and shank of 20 mm and an overall length of 130 mm, providing a balance between reach and stiffness. How many cutting edges does the cutter provide? The body accepts arrangements with three cutting edges, giving balanced cutting forces and steady chip formation. Who manufactures the cutter and who is responsible for distribution? The cutter is produced by Teknik Makina and supplied via Metav Werkzeuge for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Detailed Technical Data: Item: End Mill Brand: Teknik Makina Order Number: S594TM usable with R390-11T3 Indexable Inserts the Hersteller's Sandvik Diameter: 20mm Angle: 90° Total length: 150mm Cutting Edges: 3 Weight: 0.348kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Maximise milling reliability with the combination of a 20 mm shank and a 50 mm cutting length, delivering stable clamping and extended engagement for repeatable cycles; compatibility with SPMG indexable inserts keeps inventory lean. Order the S824TM directly via Metav Werkzeuge or contact our specialists for tailored advice. Schaftfräser S824TM – Shank milling cutter, 20 mm shank, for SPMG indexable inserts (Teknik Makina) Schaftfräser S824TM is a compact shank milling cutter designed for high-repeatability operations with indexable inserts; suited to general milling and finishing tasks in production and toolrooms 20 mm shank diameter for stable clamping 50 mm cutting length for extended engagement Compatible with Taegutec SPMG 07T3 inserts Two cutting edges for efficient material removal Consistent cycle times through secure shank design The robust 20 mm shank and precise geometry reduce runout and vibration, which directly improves tool life and workpiece consistency. With a 50 mm cutting length, the tool enables deeper engagement without compromising stability, helping to maintain target tolerances across production runs. The mechanical setup minimises forced rework and supports predictable cycle times, which is particularly relevant for jobbing shops and production cells seeking reliable throughput. Efficient material removal with indexable-insert flexibility Equipped to accept SPMG-series indexable inserts, the cutter combines the economy of replaceable cutting edges with high material-removal performance. The two cutting edges provide a balance between chip control and surface finish, reducing the frequency of edge changes while sustaining productive cutting parameters. Using indexable inserts means machining can continue with minimal interruption: worn inserts are replaced instead of regrinding solid tooling, lowering downtime and maintenance overhead. Designed for straightforward assembly and serviceability The cutter features a Torx screw M2.5x7 (Torx key T8) for secure insert clamping, allowing fast, repeatable insert changes and reliable seating during high-speed use. Clear mechanical fixing reduces setup time at the machine spindle and simplifies tool inventory procedures. The compact mass (approx. 0.198 kg) keeps handling ergonomic for toolroom staff and aids rapid changeover in multi-shift environments. Compatibility that simplifies procurement and stock management Built for compatibility with Taegutec SPMG 07T3 insert types and the SPMG 0502–0904 size range, this cutter helps standardise tooling across machines and operations. Standardisation reduces the variety of spare parts required and streamlines ordering processes, which is beneficial for purchasing teams and maintenance planners aiming to cut complexity without sacrificing capability. The clear spec alignment supports informed decision-making when integrating new cutters into existing tooling families. For tailored procurement and technical guidance on the Teknik Makina S824TM, contact Metav Werkzeuge in Emmerich for a pragmatic consultation and reliable delivery from stock Technical data Article number: S824TM Manufacturer: Teknik Makina Description: Schaftfräser for SPMG 0502-0904 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Dimensions & core data Shank diameter: 20 mm Cutting length (shank): 50 mm Number of cutting edges: 2 Overall length: 150 mm Weight: 0.198 kg Torx screw: M2.5x7 Features & compatibility Compatible inserts: SPMG 07T3 / SPMG 0502–0904 Torx key size: T8 Suitable for use with Taegutec inserts SKU: S824TM Brand: Teknik Makina FAQ What insert types fit this cutter? The S824TM is designed for SPMG insert sizes (notably SPMG 07T3) and accepts SPMG 0502–0904 indexable inserts compatible with Taegutec specifications. How many cutting edges does the tool provide? This shank milling cutter features two cutting edges, offering a balanced compromise between material removal rate and surface finish. What are the core dimensions to check for toolholder compatibility? Key dimensions include a 20 mm shank diameter and an overall length of 150 mm; confirm your holder accepts a 20 mm shank and the effective sticking-out length suits the operation. Is a special screw or key required for insert clamping? Insert clamping uses a Torx screw M2.5x7 and requires a T8 Torx key for secure fastening and repeatable seating. Which manufacturer produces this cutter and who supplies it? The cutter is a Teknik Makina product (SKU S824TM) and is supplied via Metav Werkzeuge for European customers seeking consolidated tooling supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: R148TM Item: End Mill usable with RDMW 0702 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Quantitative Characteristics: Diameter: 20mm Cutting Edges: 3 Weight: 0.354kg Total length: 150mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision, integrated coolant and robust compatibility for secure, repeatable milling results; order the cutter directly via Metav Werkzeuge or ask the consultants for tailored application advice. Schaftfräser S779-1TM – Indexable insert milling cutter, 20 mm shank, internal coolant (Teknik Makina) The Schaftfräser S779-1TM is an indexable insert milling cutter designed for XNKU 06T3 inserts, offering reliable slotting and face milling with integrated internal coolant for improved chip control. 20 mm shank diameter Internal coolant channel Compatible with XNKU 06T3 inserts 60 mm effective cutting length Faster, more consistent metal removal through cooled cutting Equipped with an internal coolant channel and a compact 20 mm shank, the tool keeps the cutting zone flushed and cooled, reducing build-up and improving dimensional stability. The combination of coolant supply and a sturdy shank means fewer interruptions for cleaning and longer intervals between inspections. For machining cycles where uninterrupted performance is required, this configuration supports improved process reliability and steadier surface finish. Simple, secure insert changes that save time Designed for use with XNKU 06T3 indexable inserts (compatible with Palbit inserts), the cutter features a proven clamping design and standard Torx fastening (T8 with M2.5x5.5 screw). The three-edge arrangement ensures effective engagement with the workpiece while simplifying insert rotation and replacement. Clear mechanical interfaces limit downtime during tool changes and facilitate predictable set-up, benefiting small-series production and repetitive operations. Robust construction for workshop and production environments Manufactured by Teknik Makina, the cutter combines a compact overall length with a 60 mm cutting segment to balance reach and rigidity. The tool’s geometry and three cutting edges provide stable cutting forces that reduce vibration and support tool life. The solid design and standardised mounting make the component straightforward to integrate into existing tool holders and machining programmes, assisting maintenance planning and inventory standardisation. For procurement or application guidance on the Teknik Makina S779-1TM shank milling cutter, contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical data Article number: S779-1TM ECLASS: 21180806 Brand: Teknik Makina Facts Diameter: 20 mm Overall length: 160 mm Shank diameter: 20 mm Effective cutting length: 60 mm Number of cutting edges: 3 Weight: 2.212 kg Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 Special features Compatible with XNKU 06T3 indexable inserts Recommended insert manufacturer: Palbit Product type: Shank milling cutter SKU: S779-1TM FAQ What inserts fit this cutter best? The cutter is specified for XNKU 06T3 indexable inserts; Palbit-compatible inserts are suitable for the S779-1TM. Does the cutter supply coolant through the tool? Yes, internal coolant is incorporated to assist chip evacuation and temperature control at the cutting edge. How many cutting edges does the tool use? The design employs three cutting edges to balance engagement and load distribution during milling. What fastening hardware is required for the inserts? Insert clamping uses a Torx T8 fixing; the specified screw size is M2.5x5.5 for the S779-1TM. Is the tool ready for direct mounting in standard tool holders? The shank and overall dimensions are standardised for integration into common holders; confirm holder compatibility against the listed 20 mm shank diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable cutting solution that combines a Ø20 mm shank with a 55 mm cutting length for stable, repeatable results in series milling. Take advantage of straightforward insert replacement and secure clamping to maintain uptime — order the S636TM directly via Metav Werkzeuge or consult our specialists for tailored application advice. Shaft Cutter S636TM — Indexable end mill, Ø20 mm shank, 3 cutting edges (Teknik Makina) The Shaft Cutter S636TM is an indexable end mill designed for secure insert clamping and efficient face and pocket milling with XOMX 0602–1204 indexable inserts Compatible with XOMX 0602–1204 inserts Ø 20 mm shank diameter 55 mm cutting length Three cutting edges, 90° cutting angle Consistent metal-removal performance for production milling This indexable end mill prioritises reproducible cutting performance through a combination of a Ø20 mm shank and a 55 mm cutting length, providing a stable connection between machine and toolholder. With three cutting edges arranged for a 90° cutting angle, the design supports efficient material removal while maintaining surface quality. Using indexable inserts reduces per-part costs because a worn edge is replaced rather than the whole tool, and insert compatibility with XOMX 0602–1204 formats keeps tooling logistics simple. The arrangement of edges and angle is particularly suitable for perpendicular face milling and shallow pocketing where consistent geometry is essential. Secure clamping and fast insert changes to cut downtime The tool features a reliable clamping system using a M2.5x5.5 Torx screw and a T8 key, enabling rapid, repeatable insert changes and minimal setup time between operations. Secure fixation reduces the risk of vibration and positional shift during heavy machining cycles, supporting steady cutting forces and longer insert life. The S636TM is designed for use with inserts from SECO, which ensures straightforward sourcing and compatible cutting geometries. Faster changeovers and predictable clamping behaviour translate directly into improved shop-floor productivity and more consistent batch quality. Practical geometry and reach for workshop flexibility An overall length of 200 mm combined with the compact shank provides reach for a variety of milling tasks while keeping tool overhang manageable. The tool’s modest weight (0.507 kg) contributes to balance and handling during tool changes and reduces strain on toolholders at higher spindle speeds. The indexable configuration supports quick adaptation of cutting parameters by selecting the appropriate insert grade for the workpiece and cutting conditions, making this cutter a pragmatic choice for mixed-production environments where versatility and uptime matter most. For procurement or technical advice on the Teknik Makina S636TM shaft cutter — including questions about insert grades or holder compatibility — contact Metav Werkzeuge in Emmerich for expert guidance and reliable supply. Technical Data Article number: S636TM Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Specifications Shank diameter: 20 mm Cutting length: 55 mm Overall length: 200 mm Diameter: 20 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.507 kg Features and compatibility Compatible inserts: for XOMX 0602–1204 Indexable Inserts Torx screw: M2.5x5.5 Torx key: T8 Suitable insert manufacturer: SECO FAQ Which insert formats are compatible with this cutter? The cutter accepts XOMX 0602–1204 indexable inserts; the S636TM is configured to work with these formats for a range of milling tasks. What is the shank diameter and overall length of the tool? The shaft has a 20 mm shank diameter and an overall length of 200 mm, giving a balance of reach and rigidity suitable for many toolholders. How many cutting edges does the cutter have and what is the cutting angle? This indexable end mill is equipped with three cutting edges and a 90° cutting angle, optimised for stable face milling and good surface definition. Which fastener and key are required for insert changes? Insert retention uses a M2.5x5.5 Torx screw tightened with a T8 key, enabling quick and repeatable insert replacements on the S636TM. Is this tool intended for shop-floor production use? Yes — the geometry, secure clamping and indexable design make it suitable for production environments where repeatability and efficient changeovers are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact combination of rigid clamping, precise parting capability and easy maintenance to keep turning operations productive. Order the parting tool holder directly via Metav Werkzeuge or consult our experts for application-specific advice. Parting Tool Holder K837TM — 20 mm, S16R shank, 200 mm length The Parting Tool Holder K837TM is a robust S16R-shank holder designed for secure clamping of 20 mm parting blades in precision turning and grooving operations. S16R shank for rigid toolpost mounting Compatible with 20 mm parting blades 200 mm overall length for extended reach Torx T8 fastening with M2.5x7 screw Stable parting and clean separation for higher output Engineered for repeatable parting operations, this holder features a S16R shank and compatibility with 20 mm parting blades, delivering the rigidity required to avoid chatter and dimensional drift. The 11.6 mm cutting-head width and a 25 mm cutting height ensure stable blade support, so each cut results in a consistent finish. With these characteristics, shops benefit from reduced rework and increased throughput when performing groove turning or cut-off tasks on conventional and CNC lathes. Rapid blade changes and low downtime through simple fixing Designed for workshop efficiency, the clamping system uses a Torx T8 interface and an M2.5x7 screw for secure, repeatable fastening. The straightforward assembly reduces tool change time and minimises production interruptions; the parting blade can be clamped or released quickly while maintaining alignment. The holder’s maximum parting depth of 3.5 mm supports common profiling and cut-off tasks without compromise, and the low mass of 0.302 kg contributes to nimble handling during set-ups and inspections. Versatile reach and reliable supply for everyday workshop use With a 16 mm shank diameter and an overall length of 200 mm, this holder provides extra reach where extended tool projection is required, while remaining compatible with standard toolposts that accept S16R tooling. The unit suits general turning and grooving workflows in production and repair shops that require a dependable, easy-to-service solution. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component is backed by a dependable logistics and quality-filter setup from Emmerich, helping to ensure consistent availability for industrial and craft applications. Contact Metav Werkzeuge for tailored advice and fast supply of Teknik Makina parting tool holders and related tooling solutions Technical data Article number: K837TM Product type: Parting tool holder Label: 20mm Stechklemmhalter L200mm Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Overall length: 200 mm Weight: 0.302 kg Compatible blade diameter: 20 mm Cutting head width: 11.6 mm Special features Shank type: S16R Cutting height: 25 mm Max parting depth: 3.5 mm Fastening: Torx T8, screw M2.5x7 SKU: K837TM FAQ Which blade size fits this holder? The holder is designed for 20 mm parting blades; compatibility is ensured by the clamping geometry of the Parting Tool Holder K837TM. What shank must the toolpost accept? This holder uses an S16R shank and a 16 mm shank diameter, so the toolpost must be compatible with S16R-style mounting. How deep can the holder part off in a single pass? The maximum parting or plunge depth specified for the holder is 3.5 mm, which suits standard separation operations. Which fastening method secures the blade? Blade clamping is effected via a Torx T8 interface and an M2.5x7 screw to provide repeatable, rigid fixation for safe operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com