Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a rigid 25 mm shank and a precise 90° cutting angle for accurate shoulder milling and consistent tool life; the combination of a 60 mm cutting length and compatibility with ADMT 1606 indexable inserts ensures stable chip control and efficient changeover — order the S460TM directly via Metav Werkzeuge or ask our consultants for application advice. Shank-mounted milling cutter S460TM — for ADMT 1606 indexable inserts, 25 mm shank (Teknik Makina) The Shank-mounted milling cutter S460TM is a purpose-built insert cutter for face and shoulder milling using ADMT 1606 indexable inserts, designed for secure clamping and repeatable positioning in production environments 90° cutting angle for square shoulder milling 25 mm shank diameter for high rigidity Compatible with ADMT 1606 indexable inserts (Walter) Fast clamping with M4x10 Torx screw (T15) Stable clamping for consistent precision With a 25 mm shank and a compact overall length of 150 mm, this cutter delivers the rigidity required for repeatable machining operations. The 60 mm effective cutting length provides sufficient engagement while keeping overhang low, which reduces vibration and improves surface finish. The tool’s balanced design and two cutting edges maintain cutting stability during intermittent or continuous passes, helping to protect cycle-time targets and reduce rework. For workshops standardising on indexable systems, the repeatable geometry of this holder supports predictable part quality and process stability. Quick insert changes and robust fastening Changeovers are straightforward thanks to the standardised insert interface for ADMT 1606 plates and the secure fastening with an M4x10 Torx screw tightened using a T15 key. This arrangement minimises set-up time and ensures the insert seat aligns reliably each time, delivering consistent edge position and tool runout control. The use of industry-standard fixing hardware simplifies inventory and maintenance planning and reduces downtime between shifts — a tangible productivity advantage for batch production and job-shop environments. Purpose and performance for productive milling The 90° geometry gives true perpendicular faces and crisp shoulders, making the cutter suitable wherever accurate right-angle features are required. Compatibility with Walter-design ADMT 1606 inserts allows operators to select grades and geometries for the application, balancing tool life and surface integrity. At a weight of 0.534 kg the assembly remains manageable for handling while still offering sufficient mass to dampen minor chatter. Overall, the design focuses on reliable machining, simple serviceability and predictable performance — qualities that support continuous production and ease tool management. Contact Metav Werkzeuge for tailored specification support and secure supply of the S460TM — Metav Werkzeuge is available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss tooling configurations and delivery options Technical data Article number: S460TM Manufacturer: Teknik Makina Name: Shank-mounted milling cutter for ADMT 1606 indexable inserts Core data Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 25 mm Number of cutting edges: 2 Weight: 0.534 kg Cutting angle: 90° Special features Compatible with ADMT 1606 indexable inserts (Walter) Fastening: M4x10 Torx screw, T15 key Design: shank-mounted insert cutter for shoulder and face milling FAQ What insert type does this cutter accept? The S460TM accepts ADMT 1606 indexable inserts; the cutter body is designed to locate and secure those plates reliably. Which screw and key are required to secure the inserts? Inserts are secured with an M4x10 Torx screw, tightened using a T15 key for consistent clamping force. What primary machining tasks is this cutter intended for? This shank-mounted cutter is intended for face and shoulder milling where a 90° cutting angle delivers perpendicular faces and accurate shoulders. How does the 25 mm shank benefit machining performance? A 25 mm shank increases rigidity and reduces deflection compared with smaller shanks, improving surface finish and dimensional stability. Is the cutter compatible with inserts from other manufacturers? The body is specified for ADMT 1606 geometry; compatibility with other manufacturers depends on matching the insert seat and clamping method, as used by Walter-design inserts Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable design that combines secure clamping and rapid insert changes for uninterrupted milling performance; the combination of a 25 mm cutting diameter, 20 mm shank and reliable Torx clamping reduces setup time and supports steady cuts—order directly via Metav Werkzeuge or consult the sales team for application advice. Shank cutter S762TM — indexable shank cutter, 25 mm diameter, TekNik Makina The Shank cutter S762TM is a robust indexable cutter designed for face and shoulder milling with ANHX 1004–1206 indexable inserts, offering a compact profile for general machining and industrial workshop use. 25 mm cutting diameter Compatible with ANHX 1004 inserts Three cutting edges for stable cuts 20 mm shank with Torx M3x7 fastening Consistent chip control for reliable milling results A tool engineered for stability and predictable performance, the S762TM combines a 25 mm cutting diameter with three cutting edges and a 90° cutting angle to deliver clean shoulder cuts and reduced vibration. The indexable-insert concept separates the cutting geometry from the shank, so the cost of wear is limited to inserts alone. For operations where repeatability matters, this configuration encourages consistent chip formation and surface finish while keeping per-cut costs lower than solid-carbide alternatives. Fast insert changes and secure clamping to reduce downtime Changeovers are simplified by the Torx clamping hardware: a M3x7 screw secured with a T8 Torx key ensures a positive, repeatable seat for each insert. The cutter accepts ANHX 1004–1206 indexable inserts (compatible with Palbit types), enabling rapid replacement and flexible selection of grades for different workpiece demands. A 20 mm shank gives rigid support in standard toolholders, while the 35 mm cutting length and 155 mm overall length provide the reach and clearance required for many milling set-ups. Built for everyday production with focused serviceability Weighing 0.432 kg, this indexable shank cutter balances mass for stable rotation without excess bulk, aiding toolholder balance and tool-change ergonomics. The modular nature of the design means wear is confined to inserts, which supports predictable tool-stock management and straightforward maintenance planning. For workshops aiming to streamline tooling stocks, the S762TM offers a practical mix of serviceability and performance that aligns with routine production schedules. For detailed application guidance or to arrange supply direct from Metav Werkzeuge in Emmerich—relying on our European stock and consultation service—please contact Metav Werkzeuge for tailored recommendations and order facilitation Technical data Article number: S762TM Manufacturer: Teknik Makina Designation: Shank cutter for ANHX 1004-1206 indexable inserts SKU: S762TM Facts Cutting diameter: 25 mm Shank diameter: 20 mm Cutting length: 35 mm Overall length: 155 mm Weight: 0.432 kg Number of cutting edges: 3 Cutting angle: 90° Special features Compatible inserts: ANHX 1004–1206 Insert compatibility: Palbit Clamping screw: M3x7 Torx key size: T8 Indexable insert system for reduced running costs FAQ Which inserts fit this shank cutter? The shank cutter S762TM is designed for ANHX 1004–1206 indexable inserts; Palbit-compatible grades are suitable for a range of machining tasks. How is the insert secured? Each insert is fastened with an M3x7 Torx screw tightened with a T8 key, providing a secure and repeatable clamping interface for the S762TM. What are the key dimensions for holder selection? Key dimensions include a 20 mm shank diameter, 25 mm cutting diameter, 35 mm cutting length and 155 mm overall length; these values guide toolholder and machine setup. How many cutting edges does the cutter have? This indexable shank cutter features three cutting edges, offering a balance between material removal rate and stability. Is the cutter suitable for repetitive production work? Yes—its indexable-insert design and compact mass (0.432 kg) make the S762TM suitable for routine production where quick insert changes and predictable tool costs are important. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable system that combines rigid shank support and proven insert compatibility for uninterrupted production. Benefit from quick insert changes and stable performance with a 25 mm shank and a 30 mm cutting length; order directly via Metav Werkzeuge or ask our consultants for tailored recommendations. Shaft milling cutter S475-1TM – indexable tool for 4NKT 0603 inserts, 25 mm shank (Teknik Makina) The Shaft milling cutter S475-1TM is a shank-mounted milling tool engineered for indexable-insert milling using 4NKT 0603 inserts, suitable for general CNC milling applications where repeatable tool performance and fast insert replacement are required 25 mm shank diameter for rigid holding Compatible with 4NKT06 indexable inserts Total length 200 mm for extended reach Secured with M3x6.5 Torx screw, T8 key Greater stability through a rigid 25 mm shank A firm clamping interface reduces runout and vibration: the 25 mm shank provides the rigidity needed for consistent chip formation and improved surface finish when paired with indexable cutting tips. This stability translates into fewer reworks and steadier cycle times on medium-duty milling operations. With an overall length of 200 mm, the tool gives extra reach for deeper contours while keeping deflection to a minimum. The specification supports machining strategies that demand dimensional reliability without frequent tool changes. Fast insert changes that keep production moving The use of 4NKT06 indexable inserts means replacement is rapid and cost-effective compared with solid-carbide cutters. Insert retention is specified with an M3x6.5 Torx screw and a T8 key, enabling secure clamping and straightforward servicing at the machine. By separating the cutting edge from the tool body, wear management becomes simple: worn inserts can be replaced in minutes, reducing machine downtime and lowering per-part tooling costs for batch production and maintenance cycles. Balanced geometry for versatile milling tasks Equipped with 3 cutting edges and a 30 mm cutting length, the cutter offers a balance between chip evacuation and surface quality. Three flutes typically provide an effective compromise between high material removal rates and accessible chip clearance, which is advantageous for slotting, profiling and light face-milling in a range of workpiece materials when using appropriate inserts. The design supports efficient cutting while allowing operators to fine-tune feed and speed for differing conditions. Trusted supply and application guidance from Metav Sourcing through Metav Werkzeuge connects this Teknik Makina tool to a broad catalogue and experienced technical support. Metav’s stock and advisory services help simplify procurement and ensure compatibility with existing toolholders and insert grades. For workshops and industrial users seeking dependable tooling with clear serviceable elements, the combination of indexable inserts and a robust shank design delivers practical performance improvements and a straightforward maintenance routine. Contact Metav Werkzeuge today for a tailored recommendation or to secure the Teknik Makina S475-1TM shaft milling cutter compatible with 4NKT 0603 inserts and ensure optimal tool selection for specific production requirements Technical data Article number: S475-1TM Manufacturer: Teknik Makina Designation: Shaft milling cutter for 4NKT 0603 indexable inserts eClass: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Cutting length: 30 mm Number of cutting edges: 3 Total length: 200 mm Weight: 0.806 kg Diameter: 25 mm Special features Compatible inserts: 4NKT06 Suitable insert supplier: Taegutec Torx screw: M3x6.5 Torx key size: T8 Indexable-insert system for quick edge changes FAQ Which inserts fit this cutter? The cutter accepts 4NKT06 indexable inserts; compatible grades from Taegutec are commonly used with the Teknik Makina S475-1TM for diverse milling tasks. What clamping screw and key are specified? Insert retention is specified as an M3x6.5 Torx screw, tightened with a T8 key, providing secure and repeatable clamping. What is the shank diameter and is it suitable for standard toolholders? The shank diameter is 25 mm, making the tool suitable for toolholders and collets designed for 25 mm shanks, ensuring a rigid connection for most milling spindles. How deep can the cutter machine in one pass? The defined cutting length of 30 mm indicates the maximum effective cutting engagement per pass, while the 200 mm total length offers reach for deeper features. How many cutting edges does the tool have and what does that imply? With 3 cutting edges, the cutter balances chip evacuation and surface finish, making it suitable for slotting and profiling where moderate chip loads and good finish are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise internal turning with internal coolant and a rigid shank Ø20 mm that together deliver stable bore quality; order the KA312TM directly via Metav Werkzeuge or ask our consultants if needed. KA312TM Boring bar A20Q — 25 mm, internal coolant (Teknik Makina) The KA312TM is a 25 mm boring bar designed for precision internal turning, featuring internal coolant delivery and a robust 20 mm shank for secure clamping in turning centres. 25 mm diameter for precise boring Internal coolant for chip evacuation 180 mm overall length for deep bores Shank Ø20 mm with 13 mm clamp-holder Consistent bore quality through a rigid geometry The boring bar offers a 25 mm cutting diameter combined with a shank Ø20 mm, which promotes torsional stiffness and reduced vibration during machining. This geometry, defined under the A20Q designation, supports repeatable diameter tolerances and improves tool life when used in the correct holder. The cutting height 30 mm and 13 mm clamp-holder width ensure the insert is supported securely, translating into improved surface finish and dimensional stability. Improved cooling and chip control for uninterrupted cycles Thanks to internal coolant, the tool channels coolant directly to the cutting edge, which reduces temperature at the cutting zone and assists chip evacuation from deep bores. In practice, this lowers the risk of built-up edge and helps maintain cutting performance over longer cycle times. The combination of coolant flow and the component’s 180 mm overall length is engineered to balance reach with rigidity for demanding internal turning tasks. Engineered for left-hand cutting and reliable assembly The bar is specified for left-hand cutting, with a cutting angle 107.5° that defines the effective rake and clearance at the insert interface. Assembly and maintenance are straightforward: the head is secured with a Torx screw M2.5x6.5 and requires a Torx T8 key for clamp adjustment. These standardised fastenings simplify changeover and support consistent clamping torque when using calibrated drivers. Practical fitment and workshop integration Weight and dimensions have been optimised for handling and toolholder compatibility: at approximately 0.422 kg and with a compact profile, the tool integrates into common boring tool holders while providing sufficient mass to dampen minor vibrations. The combination of A20Q geometry and the internal coolant capability makes the bar suitable for applications where bore accuracy and chip management are priorities, helping to shorten set-up time and sustain production quality. For precision internal turning with enhanced coolant control, request the KA312TM from Teknik Makina via Metav Werkzeuge — contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com for tailored advice and ordering support. Technical data SKU: KA312TM Type: Boring bar ISO designation: A20Q Manufacturer: Teknik Cutting Tools Facts Diameter: 25 mm Overall length: 180 mm Shank diameter: 20 mm Cutting height: 30 mm Clamp-holder width: 13 mm Cutting angle: 107.5° Weight: 0.422 kg Special features Internal coolant Left-hand cutting direction Torx screw M2.5x6.5 Torx key T8 FAQ What is the ISO designation of this boring bar? The boring bar is specified under the A20Q designation and is supplied as the KA312TM from Teknik Makina. Does the tool provide internal coolant delivery? Yes, the KA312TM features internal coolant routing to the cutting edge for improved heat control and chip evacuation. What cutting direction is the bar designed for? The tool is configured for left-hand cutting, with a cutting angle of 107.5°. Which toolholder dimensions are required for correct clamping? Use a holder compatible with a shank Ø20 mm and a clamp that accommodates a 13 mm head width. What fastener and key are used to secure the cutting head? The head is fixed with a Torx screw M2.5x6.5 and requires a Torx T8 key for assembly. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a compact Ø25 mm body, secure 20 mm shank clamping and fast insert changes with DC-- 11T3 indexable tips for stable, repeatable internal machining; order via Metav Werkzeuge or request technical guidance from the Metav specialists if specification matching is required. S20Q SD-CR Boring Bar — Ø25 mm · Right-hand · Teknik Makina The S20Q SD-CR boring bar is a right-hand internal turning tool designed for use with DC-- 11T3 indexable inserts, offering reach and rigidity for precision internal machining tasks. Ø25 mm body diameter Compatible with DC-- 11T3 inserts 180 mm overall length Right-hand cutting direction Consistent bore quality through stable geometry The tool’s Ø25 mm body diameter combined with a 20 mm shank ensures a balance of reach and rigidity that reduces chatter and stabilises tool engagement. This geometry, specified by the ISO designation S20Q SD-CR, supports consistent bore profiles and surface finish. The indexable insert system with DC-- 11T3 inserts permits rapid insert replacement; this reduces downtime compared with brazed or solid tooling and keeps production run-times predictable. The stated 62.5° cutting angle contributes to controlled chip flow and predictable cutting forces. Improved process reliability and reach for internal turning With an overall length of 180 mm and a designed cutting height of 35 mm, the bar provides sufficient reach for moderate-depth internal operations while maintaining clamping stability via its 20 mm shank. Right-hand cutting orientation offers standard compatibility with common lathe setups and CNC boring heads. The modest mass (approx. 0.443 kg) keeps inertial forces low, aiding rapid acceleration and deceleration in automated cycles; this supports higher throughput without sacrificing positional control. The ISO-style shank ensures straightforward integration into existing toolholders. Easy integration into indexable-insert workflows Designed specifically for indexable inserts, the bar accepts the DC-- 11T3 family, simplifying stock management and spare-part logistics. The SD-CR geometry focuses on reproducible clamping and repeatable cutting-edge position, which is beneficial when switching between batches or when quick reconditioning is required. For procurement and maintenance planning, the compact design reduces storage footprint and the insert-based concept lowers per-cutting-edge replacement cost compared with solid tools, while preserving the quality demanded in precision internal machining. Contact Metav Werkzeuge today for delivery options and application advice on the Teknik Makina S20Q SD-CR boring bar and compatible inserts Technical data SKU: K174TM Manufacturer: Teknik Makina ISO designation: S20Q SD-CR Compatible inserts: DC-- 11T3 Cutting direction: right Facts Diameter: 25 mm Shank diameter: 20 mm Overall length: 180 mm Cutting height: 35 mm Cutting angle: 62.5° Weight: 0.443 kg Special features For indexable inserts DC-- 11T3 Right-hand internal turning ISO-style shank designation Compact design for reduced vibration FAQ What insert type fits this boring bar? The S20Q SD-CR boring bar is designed for DC-- 11T3 indexable inserts and is compatible with standard holders for that insert family. What are the key dimensions to check for toolholder compatibility? Check the 25 mm body diameter, 20 mm shank diameter and 180 mm overall length when matching the S20Q SD-CR (Teknik Makina, SKU K174TM) to a toolholder or boring head. Is the cutting direction specified for this bar? Yes, the bar has a right-hand cutting direction suitable for conventional right-hand internal turning operations. How does the SD-CR geometry affect machining performance? The SD-CR geometry provides reproducible clamping and a defined cutting edge position, which helps to maintain consistent bore quality and simplifies insert indexing during series production. What is the declared cutting angle and why is it relevant? The declared cutting angle is 62.5°; this influences chip formation and cutting forces, contributing to controlled chip evacuation and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a solid carbide design and integrated coolant channel to maintain steady chip evacuation and long tool life; combined with CCMT insert compatibility, this delivers reliable left‑hand turning performance — available via Metav Werkzeuge for quick supply or technical consultation. Boring bar SCLC with Coolant — solid carbide, internal coolant, Ø25 mm, Teknik Makina A Boring bar SCLC with Coolant engineered for precision turning tasks where rigidity and controlled chip flow are essential, compatible with CCMT 09T3 indexable inserts and optimised for left‑hand cutting applications. Solid carbide body for high rigidity Internal coolant for improved chip evacuation Compatible with CCMT 09T3 indexable inserts 25 mm diameter, 250 mm overall length Increased stiffness for repeatable turning quality The monolithic solid carbide construction provides high bending resistance and dimensional stability during heavy engagement, which reduces vibration and improves surface finish. In practical terms, the robust design keeps the tool tip position consistent across repeated operations, so tolerance adherence becomes easier to achieve. For shops that require predictable results, the combination of diameter and rigidity translates directly into fewer reworks and steadier cycle times. Controlled cooling and chip evacuation for safer cycles The integrated internal coolant channel directs fluid to the cutting zone, aiding in heat dissipation and chip removal. This targeted cooling decreases thermal load on the insert and workpiece, supporting longer insert life and more consistent cutting conditions. For operators unfamiliar with internal coolant systems: it means coolant exits near the cutting edge rather than only from the machine spindle, improving lubrication where it matters and reducing the risk of built‑up edge. Simple matching with common indexable inserts and holders Designed for use with CCMT 09T3 indexable inserts, the tool accepts widely available carbide plates, which keeps spare parts standardised across the workshop. The shank is specified as shank Ø20 mm, and the overall dimensions — Ø25 mm cutting body and 250 mm length — suit many turning and boring setups. The ISO designation E20S SCLCL 09 indicates the geometry and clamping style for compatibility checks when selecting toolholders; when fitting the bar, ensure the holder matches the stated shank diameter and clamping method. Practical handling and maintenance for production environments The assembly uses a Torx fastening system (Torx key T15 with screw M3.5x8.5) for secure insert clamping and straightforward servicing. The cutting height 13 mm provides a clear datum for insert seating and repeatable indexation. Routine maintenance focuses on cleaning the coolant channel and checking the clamping screw torque to preserve seating accuracy. Proper care maintains machining stability and helps to maximise the return on investment from the tool’s durable carbide construction. For tailored advice on integrating the Teknik Makina boring bar into existing setups, contact Metav Werkzeuge for a precise recommendation and reliable supply from Emmerich. Technical Data Article number: KE21TM Manufacturer: Teknik Makina ISO designation: E20S SCLCL 09 SKU: KE21TM Core data Diameter: 25 mm Overall length: 250 mm Shank diameter: 20 mm Cutting height: 13 mm Weight: 0.95 kg Cutting direction: left Special features Material: solid carbide Internal coolant: yes Compatible inserts: CCMT 09T3 Torx key: T15 Torx screw: M3.5x8.5 FAQ Which inserts fit the tool? The bar is compatible with CCMT 09T3 indexable inserts; these are commonly stocked and allow quick replacement without modifying the holder. Does the tool provide internal coolant delivery? Yes — the boring bar features internal coolant, which supplies fluid directly to the cutting zone to aid cooling and chip evacuation. What are the key dimensions to check for holder compatibility? Verify the shank Ø20 mm, the body Ø25 mm and the 250 mm overall length to ensure the holder and overhang match shop fixtures. Is the cutting direction left or right? This version is configured for left‑hand cutting; select the corresponding tool orientation in the turret or holder. How is the insert secured and serviced? Insert clamping is via a Torx screw (M3.5x8.5) using a T15 key; routine checks of screw torque and cleanliness of the coolant channel are recommended for consistent performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of solid carbide construction and internal coolant for stable, high-precision boring and longer insert life; reliable compatibility with DCMT 11T3 inserts reduces setup time. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar KE64TM — SDQC with internal coolant, solid carbide, left-hand cutting Boring bar KE64TM for precision external boring on CNC lathes, equipped with internal coolant and designed for DCMT 11T3 indexable inserts to ensure consistent chip control and repeatable results Solid carbide construction for rigidity and accuracy Internal coolant for improved chip evacuation Compatible with DCMT 11T3 inserts 25 mm diameter, 250 mm overall length Stable rigidity for precision boring and consistent surface finish The solid carbide body provides high torsional stiffness, which directly improves concentricity and surface finish during external boring operations. With a 25 mm diameter and shank Ø 20 mm, the holder resists deflection under moderate cutting forces, so concentricity is maintained and rework is reduced. The nominal weight 0.95 kg contributes to damping, making the tool well suited for applications where dimensional accuracy and repeatable hole quality are priorities. Controlled cooling and chip evacuation to extend insert life Internal coolant supply is routed to the cutting edge, delivering active lubrication and aiding chip evacuation at the point of cut. This feature reduces edge temperature and built-up edge formation, which in turn extends the running life of indexable inserts such as DCMT 11T3. The cutting height 13 mm ensures adequate insert seating and clamping, while the coolant channel reduces the need for external spray systems, allowing higher sustained cutting parameters with improved process stability. Quick, secure clamping for reliable tool changes Assembly and insert fastening are executed with standard components: the tool uses a T15 Torx key and an M3.5x8.5 fixing screw for secure insert retention. The ISO designation E20S SDQCL 11 identifies the holder geometry for straightforward tool management within existing toolrooms. Left-hand cutting orientation is preconfigured, eliminating ambiguity at setup and minimising adjustment time. The result is shorter downtime and predictable repeatability in medium-complexity turning cycles. Designed for industrial production and straightforward integration The holder is engineered for seamless integration into CNC turning cells and modular toolholder systems. Internal coolant and proven geometry combine to support steady-state production, while compatibility with common indexable inserts simplifies stock management. Where process reliability and machining uptime matter, the combination of robust construction and targeted cooling helps reduce scrap rates and contributes to a more efficient manufacturing flow. For technical consultation or to secure delivery from Metav Werkzeuge, request the KE64TM boring bar from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and ordering assistance Technical data Article number: KE64TM Manufacturer: Teknik Makina Designation: SDQC with Coolant SKU: KE64TM ISO designation: E20S SDQCL 11 Facts Diameter: 25 mm Overall length: 250 mm Shank diameter: 20 mm Cutting height: 13 mm Weight: 0.95 kg Cutting direction: Left-hand For inserts: DCMT 11T3 Torx key: T15 Fixing screw: M3.5x8.5 Special features Solid carbide construction Internal coolant Left-hand cutting orientation Compatible with DCMT 11T3 indexable inserts FAQ What insert type is recommended for this boring bar? The boring bar KE64TM is specified for use with DCMT 11T3 indexable inserts, which are supported by the holder geometry and clamping height. Does the tool provide internal coolant to the cutting edge? Yes, the SDQC design of the KE64TM features internal coolant, routed to the insert seat to aid chip evacuation and reduce cutting temperatures. What are the main dimensions to check before fitting the bar? Key dimensions are 25 mm outer diameter, 250 mm overall length and shank Ø 20 mm; these determine compatibility with the turret or holder system. Is the KE64TM suitable for automated tool change systems? The EK64TM's standardised shank and ISO designation E20S SDQCL 11 allow straightforward integration into common toolholder setups used in automated cells. Which brand manufactures this boring bar? The KE64TM is manufactured by Teknik Makina and supplied through Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact combination of internal coolant and left-hand cutting that stabilises internal turning and improves tool life; compatible with standard DCMT 11T3 inserts and available directly via Metav Werkzeuge or via consultant enquiry. Boring bar SDUC with Coolant (E20S SDUCL 11) — Internal coolant, left-hand cutting, 25 mm The Boring bar SDUC with Coolant is a left-hand indexable boring bar for precision internal turning and stable chip evacuation in production and workshop environments Internal coolant for stable chip evacuation Fits DCMT 11T3 indexable inserts Solid carbide construction for rigidity 25 mm diameter, 250 mm overall length Greater process stability through coolant-assisted cutting The combination of internal coolant and a left-hand cutting orientation delivers improved cooling at the cutting edge and more reliable chip control, which directly reduces the risk of recutting and extends insert life. Designed for use with DCMT 11T3 indexable inserts, the tool supports consistent bore quality over long production runs. The integrated coolant channel focuses cooling and lubrication exactly where it is needed, helping to maintain surface finish and reduce thermal distortion in long internal bores. Rigidity and repeatable accuracy from its construction Constructed from solid carbide, the bar provides high stiffness and vibration damping that contributes to repeatable bore geometry and longer run lengths between rework. The 20 mm shank offers secure clamping in standard toolholders, while the 13 mm cutting height gives reliable insert support for stable cutting conditions. Fastening and insert retention use a T15 Torx drive with an M3.5x8.5 screw, ensuring a secure fit and straightforward, repeatable insert changes. The overall mass (approx. 0.95 kg) aids steadiness during plunge and overhang operations. Faster setup and predictable maintenance for production A focus on compatibility with widely used indexable inserts simplifies tooling logistics and reduces inventory complexity, allowing faster setup and predictable maintenance cycles. The 25 mm diameter and 250 mm overall length balance reach with rigidity, making the bar suitable for through-bore work and shorter internal features alike. Standardised clamping and screw sizes support quick insert replacement, minimising downtime and contributing to higher overall equipment effectiveness in both small workshops and larger machining centres. Contact Metav Werkzeuge for tailored advice on Teknik Makina boring bars and to secure the SDUC with internal coolant — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KE44TM Brand: Teknik Makina ISO designation: E20S SDUCL 11 Product name: Boring bar SDUC with Coolant Facts Diameter: 25 mm Overall length: 250 mm Shank diameter: 20 mm Weight: 0.95 kg Cutting height: 13 mm Special features Solid carbide Internal coolant Compatible with DCMT 11T3 inserts Left-hand cutting direction Torx key: T15 Torx screw: M3,5x8,5 FAQ Which indexable inserts fit this boring bar? The boring bar accepts DCMT 11T3 indexable inserts; use the manufacturer-recommended grades for the intended material and cutting conditions. Is coolant supplied through the bar? Yes — the E20S SDUCL 11 design includes internal coolant, which delivers lubrication and cooling directly to the cutting edge. What is the cutting direction of the tool? This tool features a left-hand cutting orientation suitable for left-hand internal turning operations. What are the fastening specifications for the insert? Insert retention uses a T15 Torx drive with an M3.5x8.5 screw for secure clamping and repeatable insert changes. What is the SKU and ISO designation for ordering and documentation? SKU KE44TM, ISO designation E20S SDUCL 11, produced by Teknik Makina Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable chip evacuation and consistent tool alignment make this boring bar ideal for productive machining: the combination of internal coolant, a 25 mm diameter and a robust clamping interface ensures stable performance in serial and job-shop environments. Order the KA284TM through Metav Werkzeuge or contact our consultants for technical advice. Boring bar A20Q (25 mm) — 180 mm length, internal coolant (Teknik Makina) The Boring bar A20Q is a precision turning accessory designed for internal coolant supply and stable insert clamping, suitable for medium-duty machining operations where chip control and repeatable set-up are required. Internal coolant supply 25 mm diameter, 180 mm overall length Shank Ø 20 mm for secure mounting Left-hand cutting direction Stable geometry for repeatable machining results The bar's core advantage is a stiff shank design with a shank diameter of 20 mm, which reduces bending and vibration during interrupted cuts. With an overall length of 180 mm and a tool weight of 0.7 kg, the component balances accessibility and rigidity to support consistent bore quality. Passive stability, achieved through its geometry, results in fewer rejects and extended insert life when compared with less rigid tooling. Efficient chip control and coolant management Equipped with internal coolant, this tool channels cutting fluid directly to the insert zone, promoting efficient chip evacuation and reduced thermal load at the cutting edge. The combination of clamping width 13 mm and a cutting edge height of 32 mm provides a secure seat for indexable inserts, enabling predictable cutting behaviour. The left-hand cutting orientation and a 93° cutting angle are designed to suit specific spindle and workpiece set-ups, improving process reliability on compatible machines. Workshop integration and serviceability Assembly and maintenance are straightforward: the insert is secured with a Torx fastener using Torx T8, screw size M2.5x6.5, which simplifies changeovers and reduces downtime. The tool's ISO designation A20Q and SKU KA284TM support procurement and inventory tracking. Its compact design allows straightforward fitment in standard toolholders while maintaining coolant-fed operation for longer insert life and cleaner chip flow. Contact Metav Werkzeuge for specification checks and supply of the Teknik Cutting Tools KA284TM boring bar with internal coolant, available for prompt delivery from Emmerich. Technical data Article number: KA284TM Product type: Boring bar ISO designation: A20Q Manufacturer: Teknik Cutting Tools Dimensions & weights Diameter: 25 mm Overall length: 180 mm Shank diameter: 20 mm Cutting edge height: 32 mm Clamping width: 13 mm Weight: 0.7 kg Cutting angle: 93° Cutting direction: left Features & fasteners Internal coolant: yes Torx key: T8 Torx screw: M2.5x6.5 SKU: KA284TM FAQ What is the shank diameter and how does it affect clamping? The shank diameter is 20 mm; a robust shank improves clamping stability and reduces deflection when the KA284TM boring bar is used in standard toolholders. Is coolant compatibility required for this tool? Yes, the bar features internal coolant; machines with coolant-through capability will provide the full benefit of improved chip evacuation with this boring bar from Teknik Cutting Tools. Which cutting direction does the bar support and why does it matter? This tool is configured for left-hand cutting; matching the bar's cutting direction to the machine spindle and insert geometry is essential for correct cutting forces and chip flow. What fasteners are needed for insert changes? Insert clamping uses a Torx screw M2.5x6.5 tightened with a Torx T8 key, which speeds up insert changes and ensures repeatable torque during assembly. How is the tool referenced for ordering and inventory? Use the SKU KA284TM and ISO designation A20Q to ensure the correct boring bar configuration is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from stable, repeatable boring operations thanks to the combination of a 25 mm shaft and a 250 mm overall length that support rigid clamping and consistent centre height. Purchase the tool directly through Metav Werkzeuge or consult our specialists for application-specific setup advice. Boring bar S25S — boring bar with 25 mm shaft and 250 mm overall length (Teknik Cutting Tools) The Boring bar S25S is a compact, right-hand turning tool designed to provide a rigid clamping platform for precision internal machining and secure cutting-head mounting in workshop turning operations. 25 mm shaft diameter 250 mm overall length Right-hand cutting direction 19.5 mm cutting-head clamp width Reliable rigidity for repeatable bore quality The combination of a 25 mm shaft and a 250 mm overall length gives a solid basis for stable machining, reducing vibration and improving repeatability. This rigidity directly supports consistent bore diameter and surface finish, which is especially valuable in serial production and precision repair work. The specification of cutting height 30 mm ensures correct insert seating depth for predictable tool geometry and repeatable results. Efficient cutting geometry that lowers rework risk A small 3° cutting angle provides the clearance needed to reduce rubbing while maintaining cutting load distribution; the right-hand orientation delivers conventional turning characteristics for standard lathe setups. These measurable parameters translate into fewer passes and less time spent on finishing, contributing to higher throughput and reduced scrap rates in everyday machining tasks. Secure clamping and straightforward serviceability A 19.5 mm clamp width at the cutting-head gives a stable interface for the mounted tool head, while the provision of a Torx T15 drive and M3.5×8.5 fastening screw facilitates safe and fast replacement or adjustment of the cutting assembly. Clear, standardised fastening details simplify tool changes and minimise downtime during maintenance or insert replacement. Compact dimensions for flexible workshop integration With a nominal weight of 0.72 kg and a shaft diameter matched to common toolholders, this bar (SKU K202TM) fits readily into standard tooling ranges and fixturing systems. The compact form factor supports close workpiece proximity and easier setup in confined setups, making it a practical choice for both small-batch bespoke work and larger series where space and setup speed matter. Contact Metav Werkzeuge for tailored advice on Teknik Cutting Tools' 25 mm boring bars — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for the workshop Technical data Article number: K202TM Label: 25mm Bohrstange L250mm ECLASS: 21180806 Manufacturer: Teknik Cutting Tools Core measurements Diameter: 25 mm Overall length: 250 mm Shaft diameter: 25 mm Cutting height: 30 mm Cutting angle: 3° Weight: 0.72 kg Design & features Cutting direction: right-hand Clamping width (cutting head): 19.5 mm Torx key: T15 Torx screw: M3.5×8.5 FAQ What are the main dimensions of the boring bar? The boring bar has a shaft diameter of 25 mm and an overall length of 250 mm; it is listed as SKU K202TM from Teknik Cutting Tools. Is the tool configured for right-hand cutting operations? Yes, the tool is specified for right-hand cutting; the geometry supports conventional turning set-ups and predictable cutting direction. What clamping width is provided for the cutting head? The clamping interface accepts a cutting-head width of 19.5 mm, offering a stable seat for the mounted assembly. Which fastening tools are required for assembly and maintenance? Assembly uses a Torx T15 drive and an M3.5×8.5 fastening screw, enabling standardised and secure tool-head replacement. For which workshop scenarios is this tool best suited? The bar is intended for precision internal machining where stiffness, repeatability and quick maintenance are priorities; its compact dimensions suit both confined setups and routine production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combine the 20 mm shank stability with a 95° cutting angle and compatibility with CC-- 09T3 indexable inserts for reliable internal turning and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for application guidance. Boring Bar K244TM — S20Q SCLCL left‑hand boring bar for CC-- 09T3 inserts by Teknik Makina The Boring Bar K244TM is a left‑hand SCLC toolholder intended for precision internal turning on CNC lathes, optimised for the CC-- 09T3 indexable insert family and medium‑duty machining tasks. Left‑hand cutting direction, 95° cutting angle 20 mm shank diameter for rigid clamping Compatible with CC-- 09T3 indexable inserts Stable core design for consistent internal turning results The toolholder is built around the S20Q SCLCL ISO designation, offering a compact yet robust geometry that reduces vibration during internal cuts. With a 20 mm shank and a 25 mm head diameter, the construction delivers enhanced stiffness for repeatable bore finishes and reduced tool deflection. This mechanical stability translates into fewer reworks and more consistent cycle times on small‑to‑medium diameter bores, supporting higher process reliability in batch production. Fast insert changes and predictable set‑up for efficient workflows Designed for use with CC-- 09T3 indexable inserts, the system enables quick insert replacement and accurate seat location, lowering machine downtime. The 95° cutting angle and cutting height 40 mm align the insert geometry for controlled chip formation, which helps to maintain surface quality without complex re‑setting. The bar’s overall length of 180 mm and a weight of 0.436 kg make it straightforward to handle during toolholder changes and compatible with standard turret clearances. Specification clarity to simplify procurement and CAD integration Nominal values such as 25 mm diameter, 20 mm shank, and 180 mm overall length are supplied to permit immediate CAD placement and fixture planning. The left‑hand orientation and SCLC configuration are documented to match turret programmes and CAM tool libraries, reducing programming iterations. Backed by a dependable supply chain and Metav’s catalogue selection, the component supports streamlined ordering and consistent restocking for workshop standardisation. For detailed fitment advice or to secure tooling for an upcoming series, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for personal specification support and order placement. Technical data Article number: K244TM Manufacturer: Teknik Makina ISO designation: S20Q SCLCL Dimensions and measurements Diameter: 25 mm Overall length: 180 mm Shank diameter: 20 mm Cutting height: 40 mm Cutting angle: 95° Weight: 0.436 kg Features and compatibility For indexable inserts CC-- 09T3 Left‑hand cutting direction SCLC toolholder configuration Compatible with standard turret clamping FAQ Which inserts fit the tool? The K244TM boring bar by Teknik Makina is compatible with CC-- 09T3 indexable inserts; select the insert grade and corner radius according to the workpiece material and finish requirement. What are the key dimensions to check for turret clearance? Check the 25 mm head diameter, 20 mm shank, and 180 mm overall length when programming turret offsets and verifying fixture clearance for the K244TM. Is the cutting direction left or right? This tool is specified for left‑hand cutting motion and should be mounted accordingly to match the lathe’s rotation and toolpath strategy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid solution for left-hand boring: the combination of a left-hand cutting configuration, a solid shank Ø20 mm and a body Ø25 mm ensures improved stability and repeatable results in medium-duty operations; order the tool directly via Metav Werkzeuge or request consultant support for application advice. K362TM STI Boring Bar – left-hand, Ø25 mm, 180 mm by Teknik Makina The K362TM STI boring bar is a left-hand cutting tool for IR/ER indexable inserts, designed for stable internal turning and facing operations in general workshop and industrial settings STI ISO S20Q STIL design Left-hand cutting direction Compatible with 16 ER indexable inserts Shank Ø20 mm, overall length 180 mm Stable machining through optimised geometry The K362TM is engineered for stability: a body diameter of Ø25 mm combined with a shank Ø20 mm reduces deflection during cutting, which directly improves dimensional consistency and surface finish. The left-hand orientation (cutting direction left) suits specific machine setups and toolpaths where reverse feed is required. For customers unfamiliar with insert tooling, indexable inserts are small, replaceable cutting tips that permit rapid renewals of the cutting edge without regrinding the bar, lowering long‑term tooling costs while maintaining productivity. Quick insert changes and ISO‑compatible mounting The bar carries an S20Q STIL ISO designation and is prepared for ER clamping systems, compatible with 16 ER format inserts and collet arrangements such as ER16. This configuration enables fast insert changes and straightforward integration into modular toolholders, reducing machine downtime. The defined cutting height 40 mm provides adequate accommodation for standard insert geometries, ensuring correct seat and clamp engagement and reliable repeatability across production runs. Practical benefits and workshop suitability With an overall length 180 mm and a mass of 0.436 kg, the tool balances reach and manoeuvrability for medium‑duty internal turning tasks. The design focuses on efficient chip control and robust mounting rather than decorative elements, resulting in a cost‑effective component for everyday shopfloor use. The STI variant for IR/ER indexable inserts simplifies spare‑parts handling: fewer different tool types are required, which supports streamlined inventory and dependable supply from Metav’s distribution in Emmerich. Contact Metav Werkzeuge GmbH in Emmerich for tailored application advice on the Teknik Makina K362TM STI boring bar and to arrange prompt supply from the local warehouse; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K362TM Manufacturer: Teknik Makina SKU: K362TM ISO designation: S20Q STIL Facts Diameter: 25 mm Shank diameter: 20 mm Overall length: 180 mm Cutting height: 40 mm Weight: 0.436 kg Cutting direction: left Special features STI for IR/ER indexable inserts Compatible with 16 ER inserts ER16 clamping compatibility Designed for internal turning and boring FAQ What insert types are compatible with this boring bar? The K362TM STI boring bar is compatible with IR/ER style indexable inserts, specifically sized for 16 ER insert formats and ER16 clamping systems. Is the bar suitable for left-hand machining only? Yes, the tool is manufactured with a left-hand cutting orientation and is intended for machine setups and toolpaths requiring left‑hand feeds. How does the S20Q STIL ISO designation affect integration? The S20Q STIL designation identifies the bar’s interface and allows straightforward matching with ISO‑compatible toolholders and holders designed for that standard, simplifying integration into existing modular tooling systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 25 mm shank and a perpendicular 90° cutting angle for precise shoulder and face milling with BDMT 1704 indexable inserts; order the cutter directly via Metav Werkzeuge or request specialist advice for integration into existing tool systems. Schaftfräser S578TM – Shank cutter for BDMT 1704 indexable inserts, 25 mm shank, 90° cutting angle (Teknik Makina) Schaftfräser S578TM designed as a 90° shank cutter for robust face and shoulder milling applications using BDMT 1704 indexable inserts 25 mm shank for rigid clamping Compatible with Kyocera BDMT 1704 inserts 90° cutting angle for shoulder milling Torx M4x7 fastening, T15 key specification Stable, compatible tooling for indexable milling operations The S578TM delivers a dependable platform for indexable-insert milling thanks to its 25 mm shank and compatibility with BDMT 1704 inserts from Kyocera. The perpendicular 90° cutting angle permits accurate shoulder and face milling with predictable geometry, reducing the need for secondary operations. For production environments where repeatability matters, the rigid shank diameter supports low runout and consistent contact with the workpiece, which directly improves dimensional reliability and surface finish. Secure clamping and concise assembly details for reduced downtime Assembly and maintenance are simplified by a clear fastening specification: Torx M4x7 screw seating and a T15 key form the mechanical connection for the insert pocket. The cutter features 2 cutting edges, a 35 mm cutting length and a 120 mm overall length, giving a compact yet effective reach for many shoulder milling tasks. The robust connection and measured mass (0.432 kg) contribute to stable cutting conditions, meaning fewer interruptions caused by vibration or insert movement and longer effective tool life per setup. Productivity benefits via indexable inserts and straightforward servicing Using indexable inserts reduces tooling spend and shortens replacement times compared with regrindable cutters. The S578TM accepts standard BDMT 1704 indexable inserts, allowing immediate use of off-the-shelf carbide grades and geometries tailored to aluminium, steel or mixed-material production cycles. Swapping worn inserts restores cutting performance quickly, translating into higher machine availability and lower unit costs over multiple production runs. For operations seeking practical upgrades without retooling machines, this tool is a compact, serviceable option that balances reliability and ease of maintenance. For procurement or technical questions about Teknik Makina shank cutters compatible with Kyocera BDMT 1704 inserts, contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data SKU: S578TM Manufacturer: Teknik Makina Brand: Teknik Makina Facts Shank diameter: 25 mm Cutting length: 35 mm Overall length: 120 mm Weight: 0.432 kg Cutting edges: 2 Cutting angle: 90° Diameter: 25 mm Torx screw: M4x7 Torx key: T15 Special features Compatible with BDMT 1704 indexable inserts Suitable for inserts from Kyocera Designed for face and shoulder milling Compact, production-ready shank cutter FAQ Which insert type fits this shank cutter? The S578TM is designed for BDMT 1704 indexable inserts; compatibility with Kyocera inserts is specified in the product data. Is the fastening specification documented for assembly? Yes. The cutter uses a Torx M4x7 fastening arrangement with a T15 key specification for securing the inserts. What applications suit this cutter best? This shank cutter is optimised for 90° face and shoulder milling where rigid clamping and predictable geometry are required. How many cutting edges does the tool provide? The tool is supplied with a configuration utilising 2 cutting edges, balancing material removal rate and stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, 90° indexable milling solution that combines precise compatibility with Sandvik R390-1806 inserts and a rigid 25 mm shank for stable, repeatable results; order directly via Metav Werkzeuge or request specialist advice for insertion and delivery options. Shank milling cutter S603TM — 90° indexable cutter, 25 mm shank, for Sandvik inserts The Shank milling cutter S603TM is designed for indexable insert milling in demanding shop-floor operations, providing secure clamping for R390-1806 inserts and reliable square-shoulder cutting. 90° cutting angle for square shoulders Compatible with Sandvik R390-1806 inserts 25 mm shank diameter, robust body Precise compatibility that reduces setup time and rejects The S603TM is engineered for direct use with Sandvik R390-1806 indexable inserts, allowing rapid replacement and consistent cutting geometry. The M4x11 Torx screw secures inserts reliably; the screw is driven with a T15 key, ensuring straightforward clamping without guesswork. This design reduces fixture adjustments and contributes to shorter setup periods, which translates into higher machine utilisation and more predictable cycle times during shoulder and face milling operations. Rigid shank and cutter geometry for better surface finish A 25 mm shank and a total length of 150 mm provide the stiffness required for accurate machining under load. The tool’s 60 mm cutting length and two cutting edges deliver stable engagement and balanced chip removal, improving surface quality and extending insert life through reduced vibration. The 90° cutting angle produces square shoulders with minimal manual finishing, meaning fewer downstream operations and a cleaner production flow for precision components. Practical productivity benefits on the production floor Designed as a modular milling solution, this cutter supports efficient insert changes and predictable performance across batches. The relatively low mass (approx. 0.53 kg) helps maintain spindle balance while the secure clamping system gives repeatable positioning of the insert seat. For production environments handling mixed runs or frequent tool changes, this configuration helps maintain throughput and reduces non-productive time, delivering a cost-efficient contribution to overall process reliability. Contact Metav Werkzeuge for tailored procurement from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm insert selection and delivery options Technical data SKU: S603TM Brand: Teknik Makina Compatible inserts: R390-1806 Torx screw: M4x11 Torx key: T15 Core measurements Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.53 kg Cutting angle: 90° Materials & features Compatible with Sandvik R390-1806 indexable inserts Secure clamping system with M4x11 Torx screw Designed for shoulder and face milling Indexable-insert milling body by Teknik Makina FAQ Which inserts fit this cutter? The cutter accepts Sandvik R390-1806 indexable inserts; matching the R390-1806 geometry ensures correct seating and predictable cutting performance with the S603TM milling body. What torque tool is required for insert retention? Insert retention uses an M4x11 Torx screw tightened with a T15 key, providing secure clamping suitable for standard shop-floor practice. Can this tool produce square shoulders reliably? Yes — the 90° cutting angle and the rigid 25 mm shank are configured to produce accurate square shoulders with minimal secondary finishing. Is the cutter suitable for high-volume production? The durable shank and secure insert clamping offer repeatable positioning and reduced downtime, making the S603TM appropriate for medium to high-volume milling tasks where insert changes are frequent. What are the main dimensions to check for spindle compatibility? Key dimensions are the 25 mm shank diameter and 150 mm overall length; verifying these ensures correct fitment and adequate clearance in the machining setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of internal coolant and compatibility with 4NKT 06 indexable inserts for improved tool life and consistent surface finish; order via Metav Werkzeuge or consult our specialists for application advice. End mill S475-2TM – indexable insert milling cutter, 25 mm shank, internal coolant (Teknik Makina) A robust End mill S475-2TM designed for use with 4NKT 06 indexable inserts, offering coolant-fed cutting for reliable chip evacuation and stable, repeatable milling across a range of machining tasks. Internal coolant for improved tool life 25 mm shank for rigid clamping For 4NKT 06 indexable inserts by Taegutec Torx T8 screws M3x6.2 included Stable cutting performance that reduces rework The cutter delivers consistent chip control thanks to its integrated internal coolant feed directly to the cutting zone. This coolant supply helps to lower cutting temperatures and improves evacuation of swarf, which in turn reduces edge wear and the need for frequent regrinding. For operations where surface finish and dimensional repeatability matter, the coolant-fed design supports longer intervals between insert changes and contributes to a more predictable production output. High rigidity for secure clamping and greater metal removal Engineered with a 25 mm shank and a compact cutting length, the tool offers improved torsional stiffness and axial stability during interrupted cuts. The rigid holder geometry enables higher feed rates and better resistance to chatter compared with thinner-shank alternatives, helping to shorten cycle times while maintaining tool life. Operators working on moderate- to heavy-duty milling tasks will notice fewer vibration-related defects and a steadier dimensional result. Fast insert changes and maintenance for minimal downtime The system accepts 4NKT 06 indexable inserts from Taegutec and uses a Torx T8 fastening system with M3x6.2 screws, making insert replacement quick and reliable. The use of standardised fastenings simplifies toolroom stockkeeping and allows for rapid reassembly, reducing non-productive time at the machine. For components that require routine index or insert swaps, the design supports a streamlined maintenance routine and predictable production planning. For procurement or technical matching of the Teknik Makina S475-2TM, contact Metav Werkzeuge for tailored advice and assistance with specification and delivery. Technical data Article number: S475-2TM Manufacturer: Teknik Makina Product type: End mill (indexable) Facts Shank diameter: 25 mm Overall length: 120 mm Cutting length: 30 mm Number of cutting edges: 4 Weight: 0.474 kg Special features Internal coolant: yes Compatible inserts: 4NKT 06 (Taegutec) Torx key: T8 Torx screw: M3x6.2 FAQ What inserts fit this cutter? The cutter is designed for 4NKT 06 indexable inserts; the tool is compatible with Taegutec inserts sized to that designation. Does the tool provide through-coolant capability? Yes, the S475-2TM features internal coolant channels that supply coolant directly to the cutting edges for improved thermal control. What shank diameter is required for the holder? The tool has a 25 mm shank diameter and requires a suitably sized, rigid collet or holder for secure clamping. How many cutting edges are fitted to the milling head? The milling head is configured with four cutting edges to balance material removal rate and surface finish. Which fastening hardware is used for insert clamping? Insert clamping uses Torx T8 fastenings and M3x6.2 screws to ensure secure, repeatable retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust indexable milling performance with internal coolant and a 25 mm shank delivers stable clamping and efficient material removal; compatible with ADKT 10T3 inserts from Korloy and supplied under SKU S079TM. Order the milling cutter directly via Metav Werkzeuge or ask our consultants if needed. 25mm Shank Milling Cutter for ADKT 10T3 Indexable Inserts (Teknik Makina) — Internal Coolant, L115 mm A 25mm shank milling cutter for ADKT 10T3 indexable inserts designed to provide stable, repeatable milling performance across a range of workshop and production tasks. Internal coolant for reliable chip control Compatible with ADKT 10T3 Korloy inserts 25 mm shank for stable clamping Durable design with four insert pockets Stable clamping and consistent cutting performance The cutter combines a 25 mm shank with an overall length of L115 mm, engineered to reduce vibration and improve runout stability during aggressive material removal. Acceptance of ADKT 10T3 indexable inserts, widely available from Korloy, means tool costs are kept predictable while allowing fast, economical insert changes. The four insert pockets ensure even load distribution and consistent cutting forces, which translates into predictable cycle times and improved surface quality on the workpiece. Coolant-through design for improved tool life and surface finish The coolant-through channel provides targeted cooling directly at the cutting edge, enhancing chip evacuation and reducing heat build-up in the cutting zone. This design helps preserve insert geometry and maintain a steady cutting edge for longer, lowering downtime for insert changes. For operations sensitive to thermal distortion, the internal coolant feature supports more stable dimensions and a finer finish, so the cutter contributes to higher first-pass quality and fewer rework cycles. Easy maintenance and secure fastening for industrial use Fast, secure insert clamping is achieved with standard Torx fastening: a T8 Torx key fits the included screw specification M2.5x5.5, enabling quick insert replacement and straightforward workshop service routines. With a compact mass of 0.4 kg, the tool balances rigidity and manoeuvrability in the tool holder, simplifying setup and reducing operator strain during tool changes. The overall configuration supports flexible integration into established milling setups while keeping service intervals short and predictable. For reliable indexable milling solutions request Teknik Cutting Tools’ 25mm shank milling cutter S079TM through Metav Werkzeuge or contact our team for tailored selection advice Technical data SKU: S079TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: ADKT 10T3 Insert supplier: Korloy Internal coolant: Yes Core data Diameter: 25 mm Overall length: 115 mm Shank diameter: 25 mm Cutting length: 40 mm Number of insert pockets: 4 Weight: 0.4 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Coolant-through design Compatible with Korloy ADKT 10T3 inserts Four insert pockets for even load distribution Fastening with T8 Torx and M2.5x5.5 screws FAQ Which indexable inserts are compatible with this cutter? The cutter accepts ADKT 10T3 indexable inserts; Korloy inserts in this designation are compatible with the S079TM tool. Is the tool coolant-through? Yes, the S079TM shank milling cutter features internal coolant to support chip evacuation and temperature control at the cutting edge. What shank diameter and overall length does the tool have? The tool has a 25 mm shank and an overall length of 115 mm, offering a balance between rigidity and reach. How are the inserts secured and which fastening tools are required? Inserts are secured with Torx screws specified as M2.5x5.5; a T8 Torx key is used for replacement and tightening. For which applications is this milling cutter suitable? This indexable-insert cutter is intended for general milling operations where stable clamping and coolant-through capability improve productivity and finish quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 25 mm shank, 45 mm cutting length and ADKT 1505 insert compatibility for consistent, low‑vibration milling; order via Metav Werkzeuge or consult their specialists for application guidance. Shank milling cutter S304TM — for ADKT 1505 indexable inserts, 25 mm shank (Teknik Cutting Tools) A versatile shank milling cutter S304TM intended for indexable‑insert face and slot milling where quick insert changes and secure clamping are required. Compatible with ADKT 1505 indexable inserts 25 mm shank diameter for stable clamping Two cutting edges for balanced milling Supplied with M4x10 Torx clamping screw Maximum flexibility through proven insert compatibility The S304TM is built around the widely used ADKT 1505 insert format, which allows shops to adopt a familiar insert geometry and maintain stock efficiency. With the indexable inserts interface, the tool facilitates rapid replacement of cutting edges without the need to regrind tools, reducing downtime and supporting predictable process planning. The association with established insert types also simplifies procurement and keeps tooling costs manageable over many production cycles. Dimensional stability that reduces vibration and runout Engineered with a 25 mm shank and an overall length of 120 mm, the tool provides a stable connection to standard toolholders while maintaining accessibility for deeper machining tasks. The 45 mm cutting length and two cutting edges combine to deliver a compact cutting zone and a symmetric cutting load, which helps to reduce vibration during interrupted cuts. These dimensional choices favour consistent surface finish and longer insert life when used within recommended speeds and feeds. Fast changes and secure clamping to keep production moving Clamping is executed with a M4x10 Torx screw and requires a T15 key, ensuring repeatable and secure insert retention for each replacement. The device’s modest mass (0.434 kg) minimises additional spindle inertia while preserving rigidity, which is beneficial in high‑repetition milling tasks. For commissioning or process integration, technical advice is available from Metav Werkzeuge to confirm holder compatibility and to recommend suitable cutting parameters for the specific ADKT 1505 grade in use. For tailored technical advice or immediate availability of the Teknik Cutting Tools S304TM, contact Metav Werkzeuge by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to ensure the tool meets production requirements Technical data Article number: S304TM Manufacturer: Teknik Makina Product: Shank milling cutter for ADKT 1505 indexable inserts Facts Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Diameter: 25 mm Cutting edges: 2 Weight: 0.434 kg Special features Compatible with ADKT 1505 inserts Fits ISCAR insert geometry Torx clamping screw M4x10 Torx key size T15 Brand: Teknik Cutting Tools FAQ Which insert type does this cutter accept? The cutter accepts ADKT 1505 indexable inserts; the geometry is compatible with the ADKT 1505 insert format used by ISCAR. What are the key dimensions to check for holder compatibility? Check the 25 mm shank diameter and 120 mm overall length against the toolholder; the cutting area extends 45 mm from the shoulder. How many cutting edges does the tool have and what is the benefit? The tool has two cutting edges, which provide a balanced cutting action for stable milling and consistent surface finish. Which clamping components are required for insert fixation? Insert fixation uses an M4x10 Torx screw tightened with a T15 key for repeatable, secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of 25 mm shank rigidity, internal coolant and compatibility with ADKT 1706 indexable inserts for stable, repeatable milling. Order or request technical advice directly via Metav Werkzeuge to integrate this tool into an efficient production setup. S063TM Shank milling cutter for ADKT 1706 indexable inserts — 25 mm shank, internal coolant (Teknik Makina) The S063TM shank milling cutter is designed for milling applications that use ADKT 1706 indexable inserts, offering a compact overall length and through-tool coolant for consistent chip control. 25 mm shank diameter for stable clamping Internal coolant for improved chip evacuation Compatible with ADKT 1706 indexable inserts 35 mm cutting length for versatile engagement Increased stiffness for consistent part quality A robust 25 mm shank increases the toolholder interface stiffness and helps to reduce deflection during lateral cuts. The result is improved precision and repeatable tolerances across batch production. Using a stiffer shank reduces vibration and contributes directly to surface finish consistency, making the tool a rational choice where geometrical accuracy and process stability are priorities. Through-tool cooling to extend tool life and manage chips The integrated internal coolant supplies cooling fluid close to the cutting edge, enhancing heat dissipation and promoting efficient chip evacuation. Cooler cutting zones reduce wear at the insert edge and therefore extend service intervals for the insert system. For operations where thermal build-up shortens tool life, this configuration supports longer stable cutting times and fewer unscheduled tool changes. Standardised insert system for inventory and cost efficiency Compatibility with ADKT 1706 indexable inserts and recognised insert manufacturers such as Korloy enables the use of standard inserts across multiple tool holders. This reduces the number of special items in stock, simplifies reordering and allows flexible selection of grades and geometries for different materials. The modular approach supports a cost-effective tooling strategy without compromising machining performance. Secure fastening and service-friendly maintenance Insert clamping is performed with a T15 Torx key and M4x10 screw, ensuring a reliable, repeatable connection between insert and cutter body. With two cutting edges and a 35 mm cutting length, the cutter offers a straightforward balance between material engagement and accessibility for insert changes. Fast, tool-room-friendly maintenance reduces downtime and keeps machines productive. For milling tasks that demand rigidity and controlled cooling, contact Metav Werkzeuge for tailored advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the S063TM and integration options. Technical data SKU: S063TM Product type: Shank milling cutter Designation: Schaftfräser Description: for ADKT 1706 indexable inserts Label: 25mm Schaftfräser ADKT 1706 L115mm mit Innenkühlung Facts Diameter: 25 mm Overall length: 115 mm Weight: 0.61 kg Shank diameter: 25 mm Cutting length: 35 mm Number of cutting edges: 2 Special features Internal coolant: yes Compatible inserts: ADKT 1706 Compatible insert manufacturer: Korloy Insert fastening: Torx T15 / M4x10 screw Manufacturer: Teknik Makina SKU: S063TM FAQ Which insert type does the cutter accept? The S063TM accepts ADKT 1706 indexable inserts and is compatible with Korloy insert grades for flexible application choices. Does the tool provide through-tool coolant? Yes — the cutter features internal coolant, which delivers fluid close to the cutting edge to aid cooling and chip evacuation during interrupted or continuous cuts. What are the key dimensions of the shank and cutting zone? The tool has a 25 mm shank diameter and a 35 mm cutting length, with an overall length of 115 mm for compact mounting. How are the inserts secured? Inserts are fixed using a Torx T15 key and an M4x10 screw, offering a secure and repeatable clamping method for routine maintenance. Which manufacturer produces the tool? The shank milling cutter is supplied by Teknik Makina and sold under SKU S063TM for identification and reordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust milling solution that combines a 25 mm shank, internal coolant and compatibility with AP-- 1604 indexable inserts for reliable cycle times and easier tool management. Order the cutter or request application advice via Metav Werkzeuge for safe selection and fast delivery. Indexable Insert Milling Cutter S256-1TM — 25 mm shank, internal coolant (Teknik Makina) Indexable Insert Milling Cutter S256-1TM is a precision tool for CNC milling operations, designed to accept AP-- 1604 indexable inserts and to improve coolant delivery at the cutting zone 25 mm shank diameter Internal coolant for improved chip control Compatible with AP-- 1604 indexable inserts Secured by M4x10 Torx screw (T15) High-performance milling with stable shank support The cutter delivers a predictable, high-stability performance thanks to its 25 mm shank and compact 120 mm overall length, which reduce overhang and vibration in most machining set-ups. With two effective cutting edges the tool achieves reliable stock removal while maintaining a consistent surface finish. The combination of a solid shank diameter and compact geometry supports higher feed rates and decreases the need for frequent rework, improving throughput in batch and single-piece production. Improved coolant delivery and maintenance benefits Equipped with internal coolant the tool channels cutting fluid directly to the insert flank and the rake face, aiding chip evacuation and reducing heat build-up at the cutting edge. The insert pocket accepts AP-- 1604 indexable inserts (Korloy compatible), which simplifies tool service: worn inserts are replaced quickly rather than regrinding the body. The clamping system uses an M4x10 Torx screw and a T15 key interface for positive torque transmission and straightforward, repeatable insert changes, shortening maintenance cycles and lowering overall tooling costs. Application-oriented design for modern CNC workflows Designed for slotting, ramping and peripheral milling tasks, the cutter integrates easily with standard toolholders used in vertical and horizontal machining centres. The internal coolant capability supports operations that demand controlled thermal conditions and better chip flushing, particularly in continuous production environments. Manufactured by Teknik Makina with a focus on compatibility and serviceability, this milling cutter is suitable where quick insert exchange and process reliability are priorities. Contact Metav Werkzeuge in Emmerich for tailored application advice and to arrange procurement of the S256-1TM — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S256-1TM Manufacturer: Teknik Makina Type: Indexable insert milling cutter Key figures Diameter: 25 mm Shank diameter: 25 mm Overall length: 120 mm Cutting length (shank): 45 mm Number of cutting edges: 2 Weight: 0.43 kg Screw: M4x10 (Torx T15) Design & special features Internal coolant Compatible with AP-- 1604 indexable inserts Korloy-compatible inserts Torx T15 screw interface FAQ Which inserts are compatible with this cutter? The cutter accepts AP-- 1604 indexable inserts; the S256-1TM is specified for Korloy AP-- 1604 style inserts. Does the tool provide internal coolant? Yes, the S256-1TM features internal coolant, which aids chip evacuation and helps to maintain cutting-edge temperature. What fastening system secures the inserts? Inserts are secured by an M4x10 Torx screw; assembly and torque are applied with a T15 key for reliable clamping. What are the main dimensions to consider for setup? Key dimensions are a 25 mm shank diameter, 120 mm overall length and 45 mm cutting length for tool-setting and holder selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, 25 mm shank combined with internal coolant and direct compatibility with AP-- 1604 Korloy indexable inserts for reliable cycle times and predictable insert life; order via Metav Werkzeuge or consult our specialists for integration advice. Shank milling cutter S276-1TM — 25 mm shank, internal coolant (Teknik Makina) A shank milling cutter designed for use with AP-- 1604 indexable inserts, delivering controlled chip evacuation and stable engagement for precision milling in production and workshop environments. 25 mm shank diameter with 65 mm cutting length Internal coolant for improved chip evacuation Compatible with AP-- 1604 Korloy indexable inserts Robust 200 mm overall length, weight 0.75 kg Consistent chip control for uninterrupted milling The built-in internal coolant directs fluid to the cutting zone, reducing heat and ensuring continuous chip clearance. This improves the cutting environment and helps to extend the service life of the AP-- 1604 inserts. By maintaining lower temperatures at the cutting edge, the tool supports consistent material removal rates and reduces unplanned stoppages, contributing to higher overall equipment effectiveness in serial production. Stable cutting engagement for repeatable accuracy With a 25 mm shank and a 65 mm cutting length, the tool offers a balanced combination of rigidity and reach that reduces deflection during plunging and peripheral milling operations. The two cutting edges provide a predictable load per tooth and help to maintain surface finish and dimensional accuracy. Fast, secure clamping is facilitated by the included T15 Torx key and the M4x10 Torx screw specification, enabling quick insert changes and minimal downtime. Designed for workshop throughput and simple tool management The milling tool’s geometry and compatibility with Korloy inserts allow straightforward stocking of commonly used indexable parts, simplifying tool inventory and tool-change routines. At 200 mm overall length and 0.75 kg weight the component is manageable in manual handling and suitable for automated changer systems where a compact, serviceable tool is required. The clear interchangeability with standard AP-- 1604 indexable inserts supports efficient replenishment and consistent performance across batches. For procurement or technical integration of the Teknik Makina indexable milling solution, contact Metav Werkzeuge for expert advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S276-1TM Manufacturer: Teknik Makina Compatible inserts: AP-- 1604 (Korloy) Torx key: T15 Torx screw: M4x10 Dimensions & weight Diameter: 25 mm Shank diameter: 25 mm Overall length: 200 mm Cutting length: 65 mm Number of cutting edges: 2 Weight: 0.75 kg Features & functions Internal coolant Indexable milling cutter design Suited for AP-- 1604 Korloy indexable inserts Product type: Shank milling cutter FAQ What insert type is required for this cutter? The cutter is designed for AP-- 1604 indexable inserts; Korloy inserts are specified as compatible. Does the tool provide coolant supply to the insert seat? Yes, the tool features internal coolant to direct fluid to the cutting zone and aid chip evacuation. What are the key mounting and replacement parts? Insert fastening uses a Torx M4x10 screw; the corresponding Torx key size is T15. Is the shank suitable for standard 25 mm tool holders? The tool has a 25 mm shank diameter, matching standard 25 mm holders for secure clamping. How many cutting edges does the cutter have and what does that mean for machining? The tool has 2 cutting edges; this provides stable engagement and predictable load per tooth for repeatable machining results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

For reliable throughput choose the combination of a 25 mm shank, internal coolant and APKT 1003 compatibility for stable, efficient indexable insert milling. Order the shaft milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft milling cutter S180-2TM — 25 mm shank, internal coolant (Teknik Cutting Tools) A shaft milling cutter S180-2TM for APKT 1003 indexable inserts, engineered for industrial CNC milling where quick insert changes and controlled chip evacuation are essential. 25 mm shank diameter Internal coolant supply Compatible with Korloy APKT 1003 inserts Total length 150 mm, 3 cutting edges Stable cutting and longer insert life through internal coolant The integrated internal coolant channel delivers coolant directly to the cutting zone, reducing thermal load on the insert and workpiece. This targeted cooling helps to maintain cutting-edge geometry under higher cutting speeds, which translates into longer insert life and fewer tool changes. For industrial production settings the result is a measurable reduction in downtime and improved process stability when paired with robust fixtures and proper spindle setup. Robust shank and simple fastening for reliable clamping A 25 mm shank and a total length of 150 mm provide a balance between reach and rigidity, reducing deflection in medium-duty milling tasks. The cutter uses a Torx T8 fastening system with M2.5x5.5 screws, enabling secure clamping of APKT 1003 inserts and straightforward maintenance. Clear torque settings and correct toolholder clamping are decisive for repeatable concentricity and consistent surface finishes in serial production. Designed for fast insert changes and consistent productivity Compatibility with APKT 1003 indexable inserts (manufacturer: Korloy) means insert changes are rapid and economical: worn edges are replaced rather than the whole tool body. The three cutting edges configuration supports uninterrupted chip flow and stable engagement for a wide range of flank angles. In production terms this leads to reduced tool inventory costs and faster return to operation after wear-related interventions. Practical maintenance and workshop handling Maintenance is facilitated by the standardised screw and key sizes, which keep service times short and predictable. The tool’s 0.563 kg weight and standard shank dimensions simplify handling and toolchanger programming. Routine checks of the coolant passage and screw torque are sufficient to retain optimal performance, while replacing inserts restores original cutting geometry without complex recalibration. For a dependable, high-performance milling solution from Teknik Cutting Tools, contact Metav Werkzeuge for product availability and application advice supplied from Emmerich. Technical data SKU: S180-2TM UID: S180-2TM Product type: Shaft milling cutter Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Compatible inserts: APKT 1003 (Korloy) Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 Facts Shank diameter: 25 mm Total length: 150 mm Cutting length: 60 mm Number of cutting edges: 3 Weight: 0.563 kg Special features Internal coolant supply Compatible with Korloy APKT 1003 indexable inserts Torx fastening system for secure clamping Indexable insert milling design SKU for ordering: S180-2TM FAQ What insert type does the cutter accept? The cutter accepts APKT 1003 indexable inserts; compatibility is specified for Korloy inserts and standard APKT seating dimensions. Is the tool supplied with cooling capability? Yes, the tool features an internal coolant channel that directs coolant to the cutting zone for thermal control and improved insert life. Which toolholder size is required for secure mounting? The cutter uses a 25 mm shank, requiring a matching 25 mm toolholder or collet with appropriate clamping for safe operation. How many cutting edges does the cutter have and what is the effect? The cutter is equipped with three cutting edges, offering a balance between chip evacuation and cutting stability for consistent results in serial milling. Which screw and key are used for insert fastening? Insert fastening uses a Torx T8 key and M2.5x5.5 screws, enabling secure, standardised insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant and a 25 mm rigid shank for steady, high-performance milling with fast insert changes. Order the tool directly via Metav Werkzeuge or contact our consultants for application-specific recommendations. End mill S169-1TM – 25 mm, internal coolant (Teknik Makina) The End mill S169-1TM is a 25 mm shank milling tool designed for indexable machining with APKT 1003 inserts, ideal for precision face and shoulder milling in industrial workshops Internal coolant for secure tool cooling 25 mm shank for rigid clamping Compatible with APKT 1003 indexable inserts Three cutting edges for stable material removal Increase throughput with optimised cooling and tool life The internal coolant supply reduces cutting temperatures at the insert edge, which directly contributes to longer tool life and more consistent cycle times. By keeping the cutting zone flushed and cooled, the design supports higher metal removal rates without premature wear, while the compatibility with APKT 1003 inserts enables a wide choice of grades for different materials. This combination converts thermal control into measurable productivity gains on the shop floor. Better accuracy through rigid shank and stable geometry A 25 mm shank and compact body deliver rigid clamping, lowering the risk of chatter and improving dimensional stability during aggressive cuts. The three-edge configuration and 40 mm cutting length balance cutting capacity with vibration resistance, resulting in cleaner surfaces and tighter tolerances. For setups where repeatability matters, the cutter’s geometry turns machine capability into reliable, reproducible results. Fast serviceability and application flexibility Designed for quick insert changes, the tool uses a Torx T8 drive and an M2.5x5.5 fastening screw to keep maintenance times short and downtime minimal. The tool’s 120 mm overall length and compatibility with Korloy-manufactured APKT 1003 inserts make it suitable for a variety of milling tasks in production and repair environments. Simple handling and standardised parts reduce toolroom complexity and support efficient tool management. For application advice or to arrange supply of the S169-1TM end mill from Metav Werkzeuge’s Emmerich stock, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored technical guidance and supply options. Technical Data Article number: S169-1TM Manufacturer: Teknik Makina Product type: End mill for indexable inserts For inserts: APKT 1003 Facts Diameter: 25 mm Shank diameter: 25 mm Overall length: 120 mm Cutting length (shank): 40 mm Weight: 0.452 kg Cutting edges: 3 ECLASS: 21180806 Special features Internal coolant Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ Is the S169-1TM compatible with APKT 1003 inserts? The S169-1TM end mill is designed specifically for APKT 1003 indexable inserts and supports Korloy-manufactured variants. Does the cutter provide internal coolant delivery? Yes, the S169-1TM features internal coolant to improve chip evacuation and reduce thermal load at the cutting edge. What shank diameter is required for clamping? This end mill has a 25 mm shank diameter and is intended for holders that accept a 25 mm shank for rigid clamping. How many cutting edges does the tool have? The S169-1TM is equipped with three cutting edges, offering stable material removal and balanced cutting forces. Which fastening tool is needed for insert changes? Insert fastening on the S169-1TM is performed with a Torx T8 driver using an M2.5x5.5 screw for secure and quick replacement. What is the overall length and cutting length of the tool? The end mill has a 120 mm overall length and a 40 mm cutting length, providing a compact profile with sufficient reach for many milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high rigidity, precise insert compatibility and straightforward maintenance to keep production running smoothly; the 25 mm shank and 3-cut configuration ensure stable chip evacuation and repeatable results. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Indexable shank cutter (Schaftfräser) for APKT 1003–1604 — 25 mm shank, 3-flute | Teknik Makina The Indexable shank cutter (Schaftfräser) is a compact milling solution designed for use with APKT 1003–1604 indexable inserts, aimed at efficient shoulder and face milling in CNC and milling centres. 25 mm shank diameter 3 cutting edges for stable machining Compatible with APKT 1003–1604 inserts (YG‑1) 90° cutting angle for shoulder milling Consistent rigidity and predictable cutting performance for reliable production The tool’s 25 mm shank and overall 100 mm length combine to give a stiff, compact assembly that reduces chatter and improves surface finish compared with longer, slender holders. Fitted for APKT-type indexable inserts, the cutter converts insert geometry into consistent cutting results: the 3 cutting edges support balanced load distribution and improved tool life when compared with higher-flute tools in similar diameters. For operators unfamiliar with indexable systems, APKT inserts are mounted and secured on a pocketed cutter body, enabling straightforward replacement of the wear element without regrinding, which reduces setup time and maintains reproducible geometry across batches. Quick insert changes and secure fastening to cut downtime Insert replacement is achieved using the supplied Torx fastening arrangement: the M2.5x7 Torx screw kept under the insert pocket and a T8 Torx key for secure tightening. This familiar clamping standard minimises the risk of incorrect torque and secures repeatable seating of the insert, which is critical for precision work. The indexable concept allows rapid switching between insert grades and chipbreaker geometries when moving from finishing to roughing operations. The result is a system that supports planned maintenance practices and keeps spindle time productive, delivering measurable throughput improvements in job-shop and production environments. Application-focus: geometry, reach and working angle explained A 90° cutting angle means the cutter is optimised for shoulder milling and accurate face operations where square shoulders and tight tolerances matter. The 35 mm cutting length provides sufficient engagement for shallow slots and shoulder passes while limiting overhang that can compromise stiffness. Weighing 0.376 kg and featuring a nominal 25 mm diameter, the tool is suited to medium-duty milling work where indexable insert economics are preferred. Operators selecting insert grade and coating should pair the cutter with APKT 1003–1604 inserts from recognised suppliers such as YG‑1 to match workpiece material and cutting conditions for best results. For application support or to specify the Teknik Makina indexable shank cutter for a particular machine or material, contact Metav Werkzeuge for tailored advice via email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants assist with insert selection and process integration. Technical data SKU: S033TM Manufacturer: Teknik Makina Article designation: Indexable shank cutter for APKT 1003–1604 indexable inserts Facts Shank diameter: 25 mm Cutting length (shank): 35 mm Overall length: 100 mm Diameter: 25 mm Cutting edges: 3 Weight: 0.376 kg Cutting angle: 90° Special features Compatible with APKT 1003–1604 indexable inserts Insert supplier: YG-1 Torx screw: M2.5x7 Torx key size: T8 FAQ What types of inserts fit this cutter? The cutter accepts APKT 1003–1604 indexable inserts; compatibility is specified to those APKT sizes and standard geometries. Is a specific torque required for the Torx screw? Use the recommended Torx key size T8 and ensure the M2.5x7 screw is tightened to the insert supplier’s torque guidance to guarantee correct seating and repeatable results. Can the cutter be used for shoulder milling on hardened materials? The tool’s 90° cutting angle suits shoulder milling, but for hardened materials consult the insert grade and coating recommendations; Metav Werkzeuge can advise on suitable insert choices. What are the key dimensions to check when selecting this holder? Key dimensions are 25 mm shank diameter, 35 mm cutting length, 100 mm overall length and the nominal 25 mm cutter diameter; these define reach, rigidity and machine-holding requirements. Which insert manufacturers pair well with this cutter? The tool is specified as compatible with APKT inserts and is commonly used with inserts from suppliers such as YG‑1; Metav Werkzeuge can recommend alternative insert brands and grades. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the secure Torx clamping, 25 mm shank rigidity and 45 mm effective cutting length to maintain consistent shoulder milling in high-grade steel; the result is reliable cycle times and straightforward insert changes. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter S244TM – 90° cutter for APMT 1604 indexable inserts (Teknik Makina) Shank milling cutter S244TM for 90° shoulder milling with APMT 1604 indexable inserts, suitable for high-class steel machining and workshop applications 25 mm shank diameter 45 mm effective cutting length 90° cutting angle for square shoulders Compatible with APMT 1604 Korloy inserts Secured with M4x10 Torx screw, T15 key Robust performance for demanding steel machining The S244TM is designed for stable shoulder milling where rigidity and repeatability matter. With a 25 mm shank and a 45 mm cutting length, the tool body limits deflection during interrupted cuts, helping to maintain dimensional accuracy on components made from high-grade steels. The 90° cutting angle produces true square shoulders without additional finishing passes, reducing cycle times and improving throughput for batch production or repair work. Secure clamping and precise geometry for reliable inserts Clamping is achieved with an M4x10 Torx screw and a T15 key, providing a secure, torque-friendly interface that minimises insert movement under load. The body carries two cutting edges, arranged for balanced cutting forces, and the overall length of 120 mm contributes to familiar tool set-ups in milling heads and arbors. A net weight of 0.43 kg gives a tangible sense of robust construction while remaining easy to handle during tool changes. Compatibility and cost-effective indexable insert use Configured for APMT 1604 indexable inserts and compatible with Korloy plates, the cutter supports quick insert replacement to restore cutting performance without swapping the whole tool body. Indexable inserts offer economical cutting-edge renewals and a range of geometry options for specific material finishes. Paired with Metav’s reliable supply chain and stock management, this configuration supports consistent workshop performance and predictable reordering cycles. For dependable 90° shoulder milling from Teknik Makina, contact Metav Werkzeuge for personalised advice and fast delivery — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S244TM Manufacturer: Teknik Makina Brand: Teknik Makina SKU: S244TM Facts Shank diameter: 25 mm Effective cutting length: 45 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.43 kg Cutting angle: 90° Special features For APMT 1604 indexable inserts Compatible with Korloy inserts Torx screw M4x10 Torx key T15 ECLASS: 21180806 ETIM: EC011860 FAQ What materials is this cutter suited for? The S244TM is specified for high-class steel machining and is designed to deliver stable performance when machining steel grades commonly found in industrial applications. Which inserts fit this cutter? This cutter accepts APMT 1604 indexable inserts and has proven compatibility with Korloy plates in the APMT 1604 format. How is the insert secured in the cutter? Inserts are fastened with an M4x10 Torx screw; the recommended bit for removal and installation is a T15 key to ensure consistent clamping force. What are the key dimensions to consider for tool set-up? Important dimensions include a 25 mm shank diameter, 45 mm effective cutting length, and 120 mm overall length, which help determine suitability for specific milling holders and reach requirements. Is this cutter available for immediate delivery? Stock and delivery options depend on Metav Werkzeuge’s warehouse availability; the product listing notes rapid dispatch from the Emmerich stock for standard orders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com