Gibt es einen Hahn und Kolb Online Shop?

Benefit from robust, vibration‑reduced machining thanks to the 25 mm shank and 60 mm cutting length, combined with secure insert retention via the supplied Torx screw; order this shaft milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft milling cutter S188TM — 25 mm shank, for APXT 1003 indexable inserts (Teknik Makina) A reliable Shaft milling cutter S188TM engineered for secure clamping of APXT 1003 indexable inserts and consistent face milling performance in industrial workshops 25 mm shank diameter for rigid clamping 60 mm cutting length for deep cuts Compatible with APXT 1003 indexable inserts Torx screw M2.5x5.5 (T8) for secure insert fixation Precision and stability for higher throughput The combination of a 25 mm shank and a 60 mm cutting length provides a stiff geometry that reduces chatter during heavy cuts, improving surface finish and dimensional consistency. With a 90° cutting angle and three cutting edges, the tool is designed to distribute cutting forces evenly, which enables higher feed rates while maintaining tool life. For shops seeking measurable productivity gains, this cutter translates rigidity into predictable cycle times and fewer reworks. Quick indexable workflow to cut downtime Designed for APXT 1003 indexable inserts and compatible with Korloy variants, the tool supports rapid insert changes and predictable cutting behaviour. The included Torx screw M2.5x5.5 and T8 key ensure firm and repeatable clamping of each insert, reducing setup time and the risk of loosening during operation. By standardising on indexable inserts, maintenance becomes straightforward and inventory management is simplified, delivering a clear operational advantage on the shop floor. Built for workshop reliability and straightforward integration With an overall length of 200 mm, a nominal 25 mm diameter, and a mass of 0.771 kg, the cutter balances reach and handling for a range of milling stations. The robust mechanical design supports consistent performance in batch production and repair work alike. Clear specification of dimensions and fastening method allows simple integration into existing toolholders and fixtures, so the milling operation can be optimised without lengthy trials. Contact Metav Werkzeuge for availability and tailored technical advice regarding the S188TM shaft milling cutter and its suitability for production environments; Metav Werkzeuge provides local supply from Emmerich and expert consulting to ensure the right tool choice Technical data Article number: S188TM Brand: Teknik Makina Product: Shaft milling cutter for indexable inserts Diameter: 25 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 200 mm Weight: 0.771 kg Number of cutting edges: 3 Cutting angle: 90° Compatibility & features For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw M2.5x5.5 Torx key size: T8 SKU: S188TM Manufacturer: Teknik Makina FAQ Is this cutter compatible with APXT 1003 inserts from other manufacturers? The shaft milling cutter S188TM is specified for APXT 1003 indexable inserts and is compatible with Korloy inserts; compatibility with other brands should be confirmed against their insert dimensions. What fixing hardware is supplied for the inserts? The tool uses a Torx screw M2.5x5.5 for insert retention and requires a T8 Torx key for tightening and loosening. What machining tasks suit this cutter best? The cutter is intended for face milling and general milling operations where a rigid 25 mm shank and a 60 mm cutting length provide the required stiffness and reach. How many cutting edges does the tool have and what is the cutting geometry? The cutter offers three cutting edges with a 90° cutting angle, optimised for even force distribution and stable material removal. What are the key dimensions to check before ordering? Verify the 25 mm diameter, 60 mm cutting length, and 200 mm overall length to ensure compatibility with the holder and the intended machining task. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine 25 mm diameter, compatibility with XC-- 130404 indexable inserts and a 56.5 mm cutting length to achieve reliable, repeatable drilling results with minimal tool change intervals; order through Metav Werkzeuge or consult our specialists for application guidance. U051TM drill body — 25 mm diameter, for XC-- 130404 indexable inserts — Teknik Makina The U051TM drill body is a 25 mm tool body engineered to accept XC-- 130404 indexable inserts, providing stable, indexable cutting for general industrial drilling applications. 25 mm nominal diameter Compatible with XC-- 130404 indexable inserts 56.5 mm effective cutting length 117 mm overall length, solid construction Consistent hole quality through a rigid tool design The drill body offers a 25 mm diameter with a 56.5 mm cutting length, engineered to deliver consistent bore geometry and repeatable concentricity. The indexable insert system reduces the need for regrinding and supports fast replacement, so cycle times remain predictable. By relying on a rigid, balanced tool body and a defined shank interface, the assembly reduces runout and vibration, which translates directly into precise hole quality and less scrap in serial production. Faster tool changes and reduced machining downtime Using XC-- 130404 indexable inserts means cutting edges are swapped rather than the entire tool, shortening maintenance intervals and lowering per‑hole tooling costs. The insert interface is compatible with established insert geometries from ISCAR, enabling quick sourcing and straightforward inventory management. The modular concept also facilitates predictable tool life planning and simplifies spindle load calculations for high‑productivity setups. Secure clamping and operational stability for varied setups Designed with a 60 mm shank length and 117 mm overall length, the tool body offers a balance between reach and stiffness suitable for many machining centres and tooling systems. The compact overall dimensions and a weight of 0.6 kg contribute to stable clamping and reduced cantilever effects in common toolholders. Where fixture rigidity and spindle speed matter, the combination of a short effective overhang and a robust tool body helps maintain cutting edge engagement and consistent chip evacuation. Practical ordering and trusted supply chain The U051TM is supplied as a proven indexable drill body compatible with inserts from major manufacturers, which supports smooth procurement and faster replenishment. Metav Werkzeuge operates as a central European distribution point and quality filter, offering an extensive range of precision tooling and logistics reliability. With a broad product range and long market presence, Metav helps reduce supplier complexity and ensures a consistent supply of replacement inserts and bodies for uninterrupted production. Contact Metav Werkzeuge to discuss application suitability for the Teknik Makina U051TM drill body and to secure suitable inserts and delivery details; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U051TM SKU: U051TM Manufacturer: Teknik Makina Product type: Drill body Label: 25 mm drill body XC-- 130404 L117mm Facts Diameter: 25 mm Cutting length: 56.5 mm Shank length: 60 mm Overall length: 117 mm Weight: 0.6 kg ECLASS: 21180201 Compatibility & features Compatible inserts: XC-- 130404 Indexable Inserts Insert manufacturer compatibility: ISCAR Intended use: Indexable insert drilling FAQ Which inserts fit this drill body? The U051TM drill body is specified for XC-- 130404 indexable inserts and is compatible with inserts from ISCAR that follow that designation. Can the tool be used in CNC machining centres? Yes, the drill body is suitable for CNC and production tooling where a short overhang and rigid clamping are available; the 60 mm shank length helps maintain stability. How does the insert system affect operating costs? Using indexable inserts reduces tooling replacement time and lowers cost per cutting edge because only inserts are replaced, not the entire tool body. Is the U051TM available with different insert geometries? The drill body accepts any insert matching the XC-- 130404 designation; different grades and geometries can be chosen to suit material and cut strategy. What information is needed to order replacements? Provide the article number or SKU (U051TM) and specify the required insert grade or geometry to ensure compatible supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise screw-in mounting, compatibility with standard APMT 0903 indexable inserts and compact dimensions for reliable, repeatable milling results in small to medium machining setups — order via Metav Werkzeuge or consult our specialists for application advice. VT226TM screw-in milling cutter for APMT 0903 – 25 mm, M12 thread (Teknik Makina) The VT226TM screw-in milling cutter designed for secure screw-in mounting with APMT 0903 indexable inserts, aimed at efficient face and light shoulder milling where quick change and stable cutting are required 25 mm cutting diameter, M12 screw-in thread Four cutting edges for balanced cutting 15° cutting angle for improved chip control Compatible with APMT 0903 Korloy inserts Higher stable material removal with controlled chip flow The VT226TM screw-in milling cutter combines a 25 mm diameter with a 15° cutting angle and four cutting edges to produce a stable cutting action that helps maintain consistent surface finish and productivity. The geometry supports efficient chip formation and evacuation which reduces recutting and vibration. For production runs where repeatability matters, this holder enables more predictable tool life when matched with the correct APMT 0903 indexable inserts and cutting data. Fast, reliable mounting reduces machine downtime The screw-in design with an M12 thread and a thread engagement of 35 mm offers a secure mechanical connection that simplifies set-up. Fixing is via an M2.5x5.5 Torx screw tightened with a T7 key, providing repeatable clamping torque and quick replacement cycles. With an overall length of 57 mm and a compact form factor, the cutter minimises overhang and helps keep rigidity high — a clear advantage when aiming to increase feed rates without compromising stability. Broad compatibility and practical workshop handling Intended for use with APMT 0903 indexable inserts and compatible with inserts from Korloy, this screw-in holder is suited to many standard milling tasks where those inserts are used. The 22 mm cutting height allows full engagement of the insert pocket and supports comfortable regrinding or insert rotation during service intervals. At just 0.116 kg, the holder is easy to handle during tool changes and tooling inventory management, making it a practical choice for busy tool rooms. Built for routine maintenance and predictable service life Compact dimensions and straightforward fastening reduce service complexity: the insert pocket geometry and screw interface are designed for repeatable seating and easy access. Regular checks of the Torx screw and insert seating prevent loosening under cyclic loads. The solid screw-in interface and clear identification of key dimensions assist maintenance planning and reduce the risk of incorrect assemblies — a tangible benefit for shops that prioritise uptime and process reliability. For enquiries about integrating the Teknik Cutting Tools screw-in milling cutter VT226TM into existing toolholders, or for sourcing compatible APMT 0903 inserts, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for case-specific advice and immediate supply options Technical data Article number: VT226TM Manufacturer: Teknik Makina / Teknik Cutting Tools ECLASS: 21180806 ETIM: EC011860 Key figures Diameter: 25 mm Thread: M12 Thread engagement length: 35 mm Overall length: 57 mm Cutting height: 22 mm Number of cutting edges: 4 Cutting angle: 15° Weight: 0.116 kg Materials & features Suitable for indexable inserts: APMT 0903 Compatible insert manufacturer: Korloy Fastening screw: M2.5x5.5 Torx Torx key required: T7 Product type: screw-in milling cutter FAQ Which indexable inserts fit the holder? The holder accepts APMT 0903 indexable inserts; compatibility with Korloy inserts is specified for the VT226TM screw-in milling cutter. What thread is required for mounting? Mounting uses an M12 screw-in thread with a 35 mm thread engagement length for secure clamping. Which fastening components are used for the insert? Insert securing is performed with an M2.5x5.5 Torx screw; a T7 Torx key is recommended for assembly and disassembly. What are the key dimensions to consider for tool set-up? Important dimensions are the 25 mm diameter, 57 mm overall length and 22 mm cutting height — these determine reach, rigidity and insert engagement. Is the cutter heavy to handle during tool changes? With a mass of 0.116 kg, the holder is lightweight and convenient for frequent tool changes and workshop handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a compact 25 mm diameter with internal coolant and an M12 screw-in fitting delivers increased rigidity, reliable chip evacuation and longer insert life. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Screw-in milling cutter for RPMT 1204 indexable inserts — 25 mm, internal coolant (Teknik Makina) The Screw-in milling cutter is a coolant-fed, screw-in cutting head designed for precise face and shoulder milling with RPMT 1204 indexable inserts in compact setups. 25 mm diameter for compact milling Internal coolant for reliable chip evacuation M12 screw-in fitting for secure mounting Compatible with Korloy RPMT 1204 inserts High stability and consistent material removal for production This cutter is engineered for repeatable results in series production. Its 25 mm diameter and two cutting edges give a favourable balance between rigidity and metal removal rate, reducing vibration and improving surface finish. The screw-in design with an M12 seating ensures a secure connection to a compatible arbor, which translates to predictable cutting forces and consistent tolerances. For operations where cycle time and process stability matter most, the cutter’s geometry helps maintain tool life and minimise rework. Coolant-fed design that extends insert life and improves productivity Built-in internal coolant directs cutting fluid close to the cutting zone, which supports efficient chip evacuation and temperature control. This reduces thermal stress on the insert and the workpiece, leading to extended insert life and fewer interruptions for tool changes. In wet machining or operations that demand reliable heat management, the coolant pathway helps maintain cutting-edge geometry and reduces the risk of built-up edge, delivering measurable gains in uptime and part quality. Secure assembly, intuitive service and wide insert compatibility Assembly and maintenance are straightforward: the cutter uses an M12 thread and is retained with a Torx screw (M4x8.5) using a T15 driver for quick indexable insert changes. It is designed for RPMT 1204 indexable inserts and is compatible with inserts from Korloy, ensuring a wide selection of grades for various materials and cutting conditions. With a clear fastening system and accessible screw size, the head offers quick interchangeability and predictable repeatability in tool setting. Compact dimensions for versatile workshop integration With a total length of 57 mm and a cutting height of 35 mm, the head fits tight set-ups while still providing effective cutting capacity; its low mass (approx. 0.141 kg) contributes to reduced centrifugal loads during high-speed rotation. The combination of compact form and coolant feed makes the tool suitable for confined tool magazines and multi-axis cells where space and thermal control are both at a premium. The unit is supplied as SKU VT294TM by Teknik Makina, and can be incorporated into tooling concepts that prioritise reliability and simple maintenance. For tailored application advice or to secure the Teknik Makina screw-in milling cutter VT294TM with internal coolant for a specific process, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VT294TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for RPMT 1204 indexable inserts Facts Diameter: 25 mm Total length: 57 mm Cutting height: 35 mm Thread height: 22 mm Thread: M12 Weight: 0.141 kg Cutting edges: 2 Torx key: T15 Torx screw: M4x8.5 Special features Internal coolant Compatible with RPMT 1204 inserts Compatible insert manufacturer: Korloy Brand: Teknik Makina FAQ Which inserts are compatible with this cutter? The cutter accepts RPMT 1204 indexable inserts; it is supplied compatible with insert grades available from Korloy and suited for a range of finishing and roughing tasks. How does the internal coolant improve performance? Internal coolant in this cutter directs fluid to the cutting edge, helping to control temperature and evacuate chips, which extends insert life and improves surface quality. What fastening and service tools are required? Assembly and insert changes use a Torx T15 driver and the retaining screw M4x8.5, enabling quick and secure servicing of the screw-in head. Is the cutter suitable for compact machining centres? Yes — the compact overall length (57 mm) and modest mass (0.141 kg) make it suitable for confined tool magazines and multi-axis machines where space is limited. What is the SKU and who manufactures the tool? The tool is sold as VT294TM and manufactured by Teknik Makina; the SKU aids in ordering and spare-part identification. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust rigidity, internal coolant and quick‑change indexable inserts for steady, high‑feed machining; order the cutter directly via Metav Werkzeuge or ask our consultants if additional technical details are required. End mill S266-1TM — indexable insert milling cutter with 25 mm shank and internal coolant (Teknik Makina) The End mill S266-1TM is an indexable‑insert milling cutter designed for AP-- 1604 inserts, combining a 25 mm shank with internal coolant to support stable face and slot milling in production and job‑shop environments. 25 mm shank for rigid toolholding Internal coolant for improved chip evacuation Compatible with AP-- 1604 inserts (Korloy) Total length 150 mm, 55 mm cutting length Stable clamping and consistent cutting performance The tool’s 25 mm shank and compact overall geometry provide enhanced rigidity, reducing runout and improving surface finish under moderate-to-high milling loads. Reduced vibration translates into more reliable dimensional adherence and predictable tool life, which benefits batch production and repeated setups. The solid mechanical design supports secure engagement in standard toolholders and helps maintain concentricity at higher feed rates. Coolant-through design improves chip control and tool life Built with internal coolant, the cutter channels coolant directly to the cutting zone to evacuate chips and dissipate heat. This targeted cooling lowers cutting temperature and reduces built-up edge on the insert, allowing for more consistent cutting conditions and extended insert intervals. In practice, coolant-through tools help maintain process stability when tackling longer tool overhangs or interrupted cuts. Quick, cost-effective inserts and compatibility Accepting AP-- 1604 indexable inserts from Korloy, the cutter benefits from the economic and logistical advantages of indexable tooling: rapid insert changes, repeatable geometry, and lower per‑edge cost compared with solid‑carbide alternatives. The use of standard inserts simplifies inventory management and reduces downtime during replacement, supporting a leaner workshop supply chain. Secure clamping hardware for repeatable setup Insert retention is achieved with a T15 Torx drive and M4x10 clamping screw, giving a repeatable and robust fastening method. The cutter features two cutting edges to balance material removal and tool life for typical finishing and semi‑finishing passes. Clear attention to the clamping interface reduces insert micro‑movement and supports consistent machining tolerances part after part. Workshop integration and process benefits With an overall length of 150 mm and a dedicated cutting length of 55 mm, the tool integrates easily into common milling workflows while offering the reach required for many slotting and shoulder operations. The combination of coolant-through capability and indexable inserts means fewer complete tool replacements and faster cycle recovery, which is particularly valuable for mixed production runs and maintenance‑sensitive operations. Practical advantages for procurement and production planning Specifying this indexable insert milling cutter simplifies ordering and stocking: one shank tool plus compatible AP-- 1604 inserts covers a range of applications. The tool’s construction supports predictable maintenance intervals and straightforward on‑bench insert servicing, helping to reduce unexpected downtime and maintain throughput in small and mid‑sized workshops. For robust, coolant-fed milling from Teknik Makina, contact Metav Werkzeuge for procurement and technical advice — call +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data SKU: S266-1TM Manufacturer: Teknik Makina Product: End mill for indexable inserts AP-- 1604 Internal coolant: Yes Dimensions & weights Shank diameter: 25 mm Overall length: 150 mm Cutting length: 55 mm Number of cutting edges: 2 Weight: 0.544 kg Fastening & compatibility Compatible inserts: AP-- 1604 Compatible insert manufacturer: Korloy Torx key: T15 Clamping screw: M4x10 FAQ What inserts does this cutter use? The S266-1TM is designed for AP-- 1604 indexable inserts and is compatible with inserts from Korloy, enabling rapid edge changes and standardised stock management. Does the tool provide coolant through the body? Yes, the cutter features internal coolant to direct fluid to the cutting zone for improved chip evacuation and temperature control. Which shank size and lengths are specified? The tool has a 25 mm shank, an overall length of 150 mm and a cutting length of 55 mm, offering a balanced reach for many milling tasks. What fastening hardware is used for the inserts? Insert retention uses a Torx T15 drive with an M4x10 clamping screw to ensure secure and repeatable fixation of the AP-- 1604 inserts. How many cutting edges does the tool have and what is the benefit? The cutter has two cutting edges, a configuration that balances material removal rate with tool life and is suitable for many finishing and semi‑finishing applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid tool body and quick insert changes to keep cycle times low and surface finish high; the combination of a 25 mm shank and a 60 mm cutting length delivers stability for longer passes while the Torx clamping system reduces downtime. Order the cutter directly via Metav Werkzeuge or contact our consultants for technical clarification. Shank Milling Cutter S024TM — 25 mm diameter, 3-flute tool for AXMT 0602 & APKT 0903 inserts by Teknik Makina A compact, indexable-insert shank milling cutter, Shank Milling Cutter S024TM, engineered for insert-based milling with AXMT 0602 and APKT 0903 systems and intended for CNC and shop-floor use 25 mm shank diameter 3 cutting edges for smooth operation 60 mm cutting length Torx fastening M2.5×5.5, T8 key Higher throughput with stable toolholding The S024TM is designed to convert insert flexibility into process efficiency. The use of indexable inserts such as AXMT 0602 and APKT 0903 allows economical edge changes without regrinding, while the solid 25 mm shank increases tool rigidity for longer unsupported lengths. This combination reduces chatter and supports higher material removal rates, so production runs remain consistent and predictable. The tool body geometry and three-flute layout favour a balance between cutting speed and surface finish. Reliable insert clamping for minimal downtime Fast, repeatable clamping is a practical advantage on busy production lines. The cutter secures inserts using a Torx screw M2.5×5.5 tightened with a T8 key, enabling quick replacement and uniform clamping torque across inserts. Consistent clamping reduces the risk of seating errors and uneven wear, translating into fewer interruptions for rework and a steadier output quality over multiple tool changes. Rigidity and handling that suit series production With an overall length of 150 mm and a cutting length of 60 mm, this milling cutter is configured to offer a good compromise between reach and stiffness. The three-flute configuration provides efficient chip evacuation while maintaining a clean surface; combined with the tool’s mass (approx. 0.583 kg) and 25 mm diameter, the cutter performs reliably in end-use setups where axis stability and repeatability matter. These attributes are particularly useful for short-to-medium length passes in standard toolholders. Practical integration and compatibility The cutter matches common insert families and is supplied for use with inserts from established manufacturers such as Taegutec, simplifying procurement and tool planning. The modular nature of indexable-insert systems means blades can be chosen to suit specific materials and finishes without replacing the entire cutter body, supporting lean stocking and rapid adaptation to changing production needs. Choose the Teknik Cutting Tools S024TM for a stable, insert-based milling solution and contact Metav Werkzeuge GmbH in Emmerich for availability or detailed specification support: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: S024TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.583 kg Diameter: 25 mm Special features For AXMT 0602 and APKT 0903 indexable inserts Compatible with Taegutec inserts Torx fastening M2.5×5.5 Torx key size T8 FAQ Which insert types fit this cutter? The cutter accepts AXMT 0602 and APKT 0903 indexable inserts; it is compatible with inserts from Taegutec as indicated for the S024TM shank milling cutter. What is the shank diameter and why does it matter? The shank diameter is 25 mm; a larger shank diameter increases rigidity and reduces vibration, improving stability during milling passes. How many cutting edges does the tool have? This milling cutter has three cutting edges (3 flutes), which balance chip evacuation and surface finish for general milling tasks. What are the tool’s dimensions for setup planning? The cutter’s overall length is 150 mm with a cutting length of 60 mm; use these values when planning holder selection and tool offsets for CNC programmes. Which screw and key are required to change inserts? Insert clamping uses a Torx screw specified as M2.5×5.5 and requires a T8 Torx key for secure and repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of reliable indexable-insert compatibility, a compact 25 mm shank and a 45 mm effective cutting length to increase throughput and part consistency; order the S214TM directly via Metav Werkzeuge or consult the technical team for application advice. S214TM — 25 mm shank milling cutter for APKT 0903 indexable inserts (Teknik Makina) S214TM is a shank-mounted indexable milling cutter engineered for robust shoulder and slot milling with APKT 0903 indexable inserts in general workshop and light industrial applications Compatible with APKT 0903 indexable inserts 25 mm shank diameter for secure clamping 45 mm effective cutting length for deeper passes 90° cutting angle for consistent shoulder milling Consistent productivity through proven insert compatibility The tool holder is designed for reliable use with APKT 0903 indexable inserts, which ensures repeatable cutting performance and simplified inventory management. By accepting a widely used insert format, the cutter reduces setup variability and shortens tool-change intervals. The combination of insert standardisation and the holder’s clamping arrangement results in predictable tool life, which suits production runs where consistent cycle times are required. Secure clamping and stiffness for stable machining A 25 mm shank and a substantial overall length of 150 mm provide the required rigidity for stable milling operations. Stiffness in the shank reduces vibration, which leads to improved surface finish and extended insert life when compared with less rigid holders. The tool’s mass, at 0.59 kg, contributes to damping of chatter without compromising handling in the tool magazine or manual changeover situations. Geometry tailored for shoulder and face milling With a 90° cutting angle and three cutting edges, the cutter is optimised for shoulder milling and light face milling where square shoulders and dimensional accuracy are important. The 45 mm effective cutting length allows for deeper engagement while maintaining chip evacuation efficiency when paired with the correct insert grade and cutting parameters. This geometry makes the tool suitable for short to medium-run production tasks where accuracy and fast cycle times are prioritised. Serviceable fastening and workshop integration Fastening uses a Torx M2.5x7 screw tightened with a T8 key, enabling quick insert clamping and secure retention during operation. The simplicity of the screw and key combination means insert changes and routine checks can be completed rapidly, reducing non-productive time. The holder is compatible with inserts from established manufacturers such as Walter, easing replacement sourcing and ensuring interchangeability across existing toolsets. Contact Metav Werkzeuge for detailed availability and application support for the Teknik Cutting Tools S214TM; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance from Emmerich Technical data Article number: S214TM SKU: S214TM Facts Shank diameter: 25 mm Effective cutting length: 45 mm Total length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.59 kg Special features For APKT 0903 indexable inserts Torx screw: M2.5x7 Torx key size: T8 Suitable for inserts by Walter FAQ What insert type does the cutter accept? The S214TM accepts APKT 0903 indexable inserts and is designed to secure them reliably for shoulder and face milling operations. Is the shank compatible with standard toolholders and collets? A 25 mm shank provides compatibility with collets and shrink-fit or hydraulic chucks specified for that diameter; appropriate clamping is recommended for optimal stiffness. How long is the effective cutting length and what does that enable? The effective cutting length is 45 mm, which enables deeper single-pass engagement for shoulder milling while maintaining chip control when matched with a suitable insert grade. Which fastening hardware is used for the inserts? Inserts are retained with a Torx M2.5x7 screw using a T8 key, simplifying insert changes and ensuring secure clamping during operation. Can existing APKT 0903 inserts from major brands be used? Yes, the holder is compatible with standard APKT 0903 inserts from established manufacturers, streamlining procurement and interchangeability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, quick insert changes and a compact overall length to keep machining cycles predictable and efficient. Order the cutter directly via Metav Werkzeuge or contact their consultants for application advice. Insert milling cutter R228TM – 25 mm shank, for RDMT 12T3 indexable inserts | Teknik Makina Insert milling cutter R228TM designed for insert-based finishing and medium-duty milling in workshop and production environments with fast insert changes and secure fastening 25 mm shank diameter for stable clamping 50 mm effective cutting length Compatible with RDMT 12T3 indexable inserts Torx fastening M3.5x8.5 with T15 key Consistent machining through rigid design The milling body’s 25 mm shank delivers a firm connection to standard toolholders, which reduces vibration and improves repeatability in serial production. Fitted for RDMT 12T3 indexable inserts, this system permits rapid blade replacement so that cutting geometry is restored without grinding — a practical advantage when maintaining surface quality and dimensional tolerances. The two cutting edges and compact form contribute to predictable tool behaviour, supporting higher process stability across repeated cycles. Quick set-up and secure clamping to reduce downtime Fast insert changes and secure fastening are central to productivity. The cutter uses a Torx M3.5x8.5 screw and requires a T15 key, enabling quick, reliable tightening and straightforward maintenance. With an overall length of 120 mm and a weight of 0.422 kg, the tool balances accessibility and handling for changeovers while minimising the time lost to adjustment. Tools that simplify routine maintenance reduce non-productive time and make shift planning more efficient. Versatile cutting length for everyday workshop tasks An effective cutting length of 50 mm combined with a 25 mm diameter provides a balance between reach and rigidity, making the tool suitable for many common milling operations where insert-based solutions are preferred. The insert concept allows easy geometry changes and cost-effective reconditioning: worn inserts are replaced rather than the entire cutter, delivering an economic advantage for regular use in maintenance, prototyping and small-series production. Supply reliability and technical support from a precision partner Manufactured by Teknik Makina, the tool arrives ready for assembly and immediate use in compatible toolholders. Stocked by Metav Werkzeuge, the item benefits from a dependable European supply chain and Metav’s decades of experience in precision tools. Technical information and planning support are available to clarify suitability for specific fixtures or processes; for complex operations, Metav’s consultants can assist with selection and compatibility checks. Secure the Teknik Cutting Tools insert milling cutter R228TM with 25 mm shank from Metav Werkzeuge for expedited delivery and technical consultancy via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: R228TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Effective cutting length: 50 mm Overall length: 120 mm Weight: 0.422 kg Number of cutting edges: 2 Diameter: 25 mm Special features For RDMT 12T3 indexable inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which inserts are compatible with this cutter? The cutter accepts RDMT 12T3 indexable inserts; the R228TM is designed to secure these inserts for quick replacement and repeatable cutting geometry. How is the insert secured and changed? Inserts are fastened with a Torx M3.5x8.5 screw; use a T15 key to tighten or release the screw when changing inserts on the R228TM. What are the key dimensions to check for toolholder compatibility? Important dimensions include a 25 mm shank diameter and a 120 mm overall length; the 50 mm cutting length indicates the effective engagement depth. How many cutting edges does the tool provide? The cutter features 2 cutting edges, enabling efficient material removal while keeping insert costs manageable. Is this tool suitable for series production? The insert concept and rigid 25 mm shank make the tool well suited to repetitive milling tasks where rapid insert changes and consistent results are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the cutter’s combination of reliable insert compatibility, a rigid 25 mm shank and a 90° cutting angle for consistent, repeatable milling results; order the tool directly via Metav Werkzeuge or consult the technical team if further specification is required Shaft milling cutter S838TM — shank-mounted cutter for XNKT 0604 indexable inserts (Teknik Makina) The Shaft milling cutter S838TM is a shank-mounted milling body designed for indexable-insert operations with XNKT 0604 inserts, offering a compact 25 mm shank for stable clamping and quick insert changes Compatible with XNKT 0604 indexable inserts 25 mm shank for high clamping rigidity Three cutting edges for balanced cutting M3x7 Torx screw with T8 key for secure fixing Stable clamping and predictable machining quality The robust 25 mm shank and the compact overall geometry are designed to reduce deflection and vibration during rotation, which results in more consistent surface finishes and repeatable cycle times. With an overall length of 150 mm and a focussed cutting length of 40 mm, the tool body provides an optimised span between holder and cutting zone. The consequence is a greater degree of dimensional stability in the machined component, while the moderate weight of 0.572 kg contributes to a well‑balanced spindle load during high‑speed rotation. Fast indexable-insert handling and secure fixing Insert changes are simplified by the proven fastening system: a M3x7 Torx screw, tightened with a T8 key, secures each insert reliably and permits quick service routines. The cutter accepts XNKT 0604 inserts and is compatible with inserts from Korloy, enabling use of widely available grades and geometries. This standardised interface supports rapid tooling exchanges and predictable downtime, making the body suitable for production environments where tool change speed and process repeatability are valued. Geometry that supports efficient chip control and stability With a 90° cutting angle and three cutting edges, the milling body encourages even chipload distribution and balanced cutting forces, which helps to maintain steady feeds and reduces the risk of eccentric wear. The arrangement of the cutting edges promotes controlled chip evacuation and contributes to tool life predictability. For operations where insert indexing and rapid replacement are routine, this design supports a reliable balance between productivity and maintenance simplicity. For enquiries about specifications, insert compatibility or availability of the Teknik Makina S838TM with 25 mm shank, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert guidance and order processing Technical data SKU: S838TM Manufacturer: Teknik Makina Article name: Shaft milling cutter for XNKT 0604 indexable inserts Brand: Teknik Makina EClass: 21180806 ETIM: EC011860 Core dimensions Shank diameter: 25 mm Cutting length: 40 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.572 kg Features & compatibility Compatible inserts: XNKT 0604 Suitable insert supplier: Korloy Fixing screw: M3x7 Torx Torx key size: T8 SKU identifier: S838TM FAQ Which indexable inserts fit this cutter? The shaft milling cutter accepts XNKT 0604 inserts and is compatible with Korloy XNKT 0604 grades in the specified insert format. What is the shank diameter and why does it matter? The 25 mm shank provides increased clamping rigidity, which improves stability and reduces deflection during milling with the S838TM tool body. How are the inserts secured in the cutter body? Inserts are secured using a M3x7 Torx screw, tightened with a T8 key, allowing secure fixation and straightforward replacement of the indexable inserts. What overall and cutting lengths are provided? The tool has an overall length of 150 mm and a cutting length of 40 mm, balancing reach with rigidity for standard milling setups. How many cutting edges does the tool have and what is the cutting angle? The body is configured with three cutting edges and a 90° cutting angle, promoting balanced cutting forces and controlled chip formation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise clamping, reliable compatibility with WNMG 0604 inserts and robust left-hand cutting for efficient production cycles; order the boring bar directly via Metav Werkzeuge or consult our specialists for integration advice. Boring bar PWLN for WNMG indexable inserts — A20R PWLNL left-hand tool holder, 20 mm shank (Teknik Makina) A boring bar PWLN for WNMG indexable inserts designed for external turning and profiling with WNMG 0604 inserts; suitable where left-hand cutting and consistent tool location are required in CNC turning work. Left-hand cutting orientation Compatible with WNMG 0604 inserts 20 mm shank diameter, 25 mm body 200 mm overall length, 95° cutting angle Stable clamping and repeatable positioning for consistent results The A20R designation denotes a proven holder geometry; paired with the 20 mm shank and a 25 mm diameter body this holder provides increased rigidity compared with slimmer bars. Rigidity translates directly into improved surface finish and reduced vibration during heavy cuts. The robust clamping for WNMG 0604 inserts ensures repeatable positioning after index changes, which reduces setup time and supports steady process capability across batches. Weight and balance have been optimised for tool turrets, with a mass of 0.502 kg that contributes to predictable dynamics on the lathe. Geometry tuned for efficient chip flow and secure cutting With a 95° cutting angle and a cut height of 40 mm, the geometry is configured to promote controlled chip formation and stable engagement of the insert. The left-hand feed orientation offers clear procedural benefits in specific turning sequences and when machining components requiring approach from the left side. These characteristics reduce the incidence of chatter and help maintain tool life by lowering shock loads on the insert edge. Where cycle time and surface integrity matter, the combination of angle and feed direction delivers measurable process gains. Fast indexable-insert changes and manufacturing reliability Designed for WNMG 0604 indexable inserts, the holder facilitates quick insert swaps without complex realignment. The ISO code A20R PWLNL signals compatibility with standard tooling systems, enabling straightforward integration into existing tool setups. This predictability reduces downtime and supports lean production by shortening maintenance intervals. For operations prioritising throughput, the straightforward insert handling and secure clamp interface offer clear economic benefits through reduced non-productive time. Practical fit for modular turning operations At 200 mm overall length, the holder balances reach and stiffness for many external turning tasks while maintaining turret clearance and accessibility. The combination of dimensions and ISO conformity allows the tool to be specified confidently in work orders and CAM setups. Where tool repeatability and defined machine routines are required, the holder’s measured geometry simplifies programming and reduces trial cuts, helping production teams reach target tolerances faster. For integration assistance with the Teknik Makina boring bar or to discuss suitable insert grades and turret setups, contact Metav Werkzeuge — convenient European supply and technical guidance from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: P390TM Manufacturer: Teknik Makina ISO designation: A20R PWLNL Compatible inserts: WNMG 0604 Cutting direction: left Numbers / Core technical data Shank diameter: 20 mm Cutting height: 40 mm Overall length: 200 mm Body/diameter: 25 mm Weight: 0.502 kg Cutting angle: 95° Designs / Special features Left-hand orientation For WNMG 0604 indexable inserts ISO: A20R PWLNL Clamp holder size: 06 FAQ Which insert type fits this tool holder? The holder accepts WNMG 0604 indexable inserts; the PWLN pocket is configured for this insert size and geometry. Is this holder suitable for right-hand cutting? This specific variant is configured for left-hand cutting; select a right-hand model if the application requires opposite feed direction. What does A20R PWLNL mean? A20R PWLNL is the ISO designation describing holder style and pocket geometry, confirming compatibility with standard PWLN/WNMG arrangements. What are the key dimensions to check before ordering? Verify the 20 mm shank diameter, 200 mm overall length and the 25 mm body diameter to ensure turret and fixture compatibility; SKU P390TM identifies this exact configuration. Can the insert be indexed quickly in production? Yes — the clamp and pocket geometry are designed for rapid insert changes and repeatable positioning to reduce downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of high rigidity and precise insert compatibility to maintain stable internal turning cycles; the left‑hand orientation and 107.5° cutting angle support reliable chip control and consistent surface quality. Order the tool directly via Metav Werkzeuge or consult the technical team for application guidance. S20Q SDQCL Boring Bar (SDQC for DC-- indexable inserts) — Teknik Makina, left‑hand, Ø25 mm A S20Q SDQCL boring bar engineered for precision internal turning with DC-- 11T3 indexable inserts, offering a compact 20 mm shank for secure clamping and a 25 mm cutting diameter for medium‑duty bores Left‑hand cutting direction for specific turning operations Compatible with DC-- 11T3 indexable inserts Ø 25 mm cutting diameter with 20 mm shank 107.5° cutting angle for stable machining Precise internal turning with proven mechanical stability The S20Q SDQCL holder brings measurable benefits to shops that require repeatable bore quality. The combination of a 20 mm shank diameter and 25 mm cutting diameter increases clamping stiffness, which reduces vibration during internal turning and contributes to more consistent bore tolerances. The specified cutting angle of 107.5° optimises the engagement geometry for stable cutting forces, so cycle times remain predictable and tool deflection is minimised. These technical attributes translate into fewer rejected parts and improved throughput on conventional and CNC lathes. Flexible tooling and quick changeover for efficient production Designed for the SDQC pocket, this boring bar accepts DC-- 11T3 indexable inserts, enabling rapid insert replacement without disturbing set‑up parameters. The standardised insert interface supports a range of carbide grades and coatings from established manufacturers, allowing the machining strategy to be adapted for different workpiece materials. Keeping insert compatibility as a focal point reduces inventory complexity and supports fast reaction to worn edges, which in turn maintains uptime and lowers process costs per part. Application guidance and integration into workshop workflows The left‑hand cutting orientation makes this holder particularly suitable for internal features where tool approach requires reverse cutting direction. The compact overall length of 180 mm and a modest mass of 0.435 kg simplify mounting and reduce unbalanced loads on the turret. When used within a correctly set‑up toolholder and appropriate clamping system, the holder’s geometry supports accurate axial and radial positioning. For process planners and operators, these attributes mean easier set‑up verification and more predictable finishing operations across serial production runs. For professional procurement or process advice, order the Teknik Cutting Tools S20Q SDQCL via Metav Werkzeuge for assured supply and precision — contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com for tailored recommendations and availability. Technical Data Article number: K278TM Manufacturer: Teknik Makina ISO designation: S20Q SDQCL Description: SDQC for DC-- indexable inserts Facts Cutting diameter: 25 mm Shank diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Weight: 0.435 kg Cutting angle: 107.5° Cutting direction: left‑hand Special features For DC-- 11T3 indexable inserts SDQC holder geometry Compact 20 mm shank for secure clamping FAQ What inserts fit this boring bar? The boring bar accepts DC-- 11T3 indexable inserts; this compatibility allows selection of grades and geometries suitable for a range of workpiece materials. Is the holder right‑ or left‑handed? This tool is specified for left‑hand cutting direction, intended for turning applications that require reverse approach. What are the key dimensions for setup? Important setup values are Ø 25 mm cutting diameter, 20 mm shank diameter and 180 mm overall length; the cutting height is 32 mm. Can this holder be used on CNC lathes? Yes, the SDQC holder geometry and compact shank suit turret mounting on both conventional and CNC lathes when clamped correctly. How does the 107.5° cutting angle benefit machining? The 107.5° angle improves engagement stability and helps reduce deflection during internal turning, supporting consistent bore quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Deliver precise, vibration‑resistant turning with a compact, right‑hand tool that combines a Ø25 mm cutting diameter and a robust Ø20 mm shank, enabling stable chip control and consistent surface finish. Order the Boring bar S20Q SDQCR directly via Metav Werkzeuge or consult the Metav specialists for further technical guidance. Boring bar S20Q SDQCR — SDQC for DC-- indexable inserts, Ø25 mm, shank Ø20 mm (Teknik Makina) Boring bar S20Q SDQCR provides a right‑hand, indexable‑insert holder tailored for medium‑duty turning and finishing tasks where repeatable geometry and short setup times matter. Right-hand cutting direction Cutting diameter Ø25 mm Shank diameter Ø20 mm Compatible with DC-- 11T3 inserts High stability for repeatable turning performance The combination of a Ø25 mm cutting diameter and a Ø20 mm shank delivers a compact but rigid toolbody that reduces deflection during cuts. Reduced vibration improves tool life and helps to maintain tolerances across series production — a clear advantage where process stability is essential. The geometry supports controlled chip formation and contributes directly to consistent surface quality and fewer rework cycles. Quick insert changes and secure clamping to keep cycles short Designed for DC-- 11T3 indexable inserts and an SDQC‑style clamping arrangement, the holder enables fast, reliable insert replacement with minimal downtime. The 32 mm cutting height and the defined 107.5° cutting angle ensure correct seat and engagement for standard turning inserts, meaning insert seating is precise and repeatable. Faster changeovers translate into higher machine availability and lower per‑part tooling cost in production environments. Engineered for productive machining routines With an overall length of 180 mm and a mass of only 0.435 kg, the tool balances reach and handling, offering good access for internal and external operations while keeping inertia low. The right‑hand cutting orientation suits standard lathe setups and simplifies process planning. The ISO designation S20Q SDQCR denotes the shank class and holder style, helping maintenance and procurement teams to standardise tool sets and reduce inventory complexity. Practical integration and workshop reliability The holder’s compatibility with common indexable inserts reduces the number of specialised items in the tool cabinet, which eases logistics and shortens procurement lead times. The compact footprint and robust clamping support repeatable assembly and predictable cutting behaviour on the shop floor. For complex production needs or specific material requirements, technical documentation is available and additional application advice can be provided to ensure the tool matches the machining task. Contact Metav Werkzeuge for tailored advice on Teknik Makina’s S20Q SDQCR or request a specification review from the Metav team in Emmerich to ensure optimal setup and supply continuity Technical data Article number: K148TM Manufacturer: Teknik Makina ISO designation: S20Q SDQCR Facts Cutting diameter: 25 mm Shank diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Weight: 0.435 kg Cutting angle: 107.5° Cutting direction: right Special features SDQC for DC-- indexable inserts Suitable for DC-- 11T3 inserts Compact, rigid holder design FAQ Which inserts fit this holder? The S20Q SDQCR holder accepts DC-- 11T3 indexable inserts; the SDQC clamping style secures standard turning plates for reliable seating and chip control. Is the tool suited to internal boring? Yes — with an overall length of 180 mm and a compact shank, the holder is suitable for many internal turning operations while maintaining rigidity. What is the shank diameter and why does it matter? Shank diameter is 20 mm; a stiffer shank reduces deflection under load and improves repeatability, which is vital for close tolerance production. What cutting direction is provided? The tool is configured for right‑hand cutting, matching common lathe setups and standard toolpath strategies. How does the clamping system affect productivity? The SDQC clamping arrangement allows quick, repeatable insert changes, reducing machine downtime and supporting higher overall equipment effectiveness. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable and precise internal turning solution that combines a 25 mm diameter body with a 20 mm shank for reliable clamping and repeatable results; the left-hand SDUC configuration for DC-- 11T3 indexable inserts supports efficient insert changes and consistent chip control. Order directly via Metav Werkzeuge or consult the team for application advice. Boring bar S20Q SDUCL — 25 mm diameter, left-hand cutting (Teknik Makina) A Boring bar S20Q SDUCL designed for internal turning with SDUC-style holders, compatible with DC-- 11T3 indexable inserts for controlled chip flow and repeatable bore finishing. Left-hand cutting for specific geometries 25 mm diameter for stable boring Compatible with DC-- 11T3 inserts 180 mm overall length, 20 mm shank Precise geometry for consistent internal turning results The cylindrical design and dimensional control of this boring bar offer a balance between rigidity and accessibility that matters in production environments. With a 25 mm diameter body and 20 mm shank, the tool reduces deflection when mounted in standard toolholders, which improves dimensional consistency and surface finish. The measured mass and geometry contribute to predictable dynamic behaviour during internal turning cycles, supporting higher first-pass yield and reduced rework. Compatibility and cutting geometry explained Engineered for SDUC-style inserts, the tool accepts DC-- 11T3 indexable plates, a common format for internal facing and finishing operations. The 93° cutting angle provides an effective approach for bore edges and shoulder machining, while the left-hand cutting orientation suits operations where entry from the right-hand side improves access or chip evacuation. Specifying the correct insert grade and chipbreaker will align cutting performance with material and feed-rate requirements. Built for efficient workshop integration A 32 mm cutting height and 180 mm overall length give this toolholder a practical reach while keeping the centre of gravity close to the clamping face, simplifying set-up and balancing. The S20Q SDUCL format follows ISO-style designation for straightforward tool management and inventory control. The modest weight supports safer handling during changeovers and contributes to quicker machine set-up, reducing downtime between batches. Reliability in repeat production and maintenance Designed as a holder for indexable inserts, the assembly minimises maintenance effort: insert replacement is fast and repeatable, lowering toolhandling time in the cell. The combination of standardised insert compatibility and familiar mounting dimensions streamlines tool procurement and reduces the need for special adapters. For procurement and workshop planning, the well-documented ISO designation aids tool lists and fixture checks. Contact Metav Werkzeuge for tailored application support and reliable supply from Emmerich—reference SKU K260TM for the Teknik Makina S20Q SDUCL boring bar and receive expert advice on inserts and set-up Technical data Article number: K260TM ISO designation: S20Q SDUCL Description: SDUC for DC-- Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 25 mm Shank diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Weight: 0.435 kg Cutting angle: 93° Cutting direction: left-hand Special features Compatible with DC-- 11T3 indexable inserts SDUC-style insert holder Left-hand tool for specific machining directions For internal turning and finishing applications SKU: K260TM FAQ What insert type fits this boring bar? The boring bar accepts DC-- 11T3 indexable inserts in an SDUC pocket; selecting the correct grade and chipbreaker is advised for the workpiece material. Is this tool suitable for finishing internal bores? Yes, the geometry and 93° cutting angle make the tool appropriate for finishing operations when paired with a matching finishing insert. What are the key dimensions for clamping and set-up? Key dimensions: 25 mm body diameter, 20 mm shank diameter and 180 mm overall length (SKU K260TM) for correct toolholder selection. Can the left-hand cutting orientation be used for conventional set-ups? Left-hand cutting is intended for operations where the tool engages material in that direction; the orientation suits specific lathe set-ups and access conditions. How does the tool support quick insert changes? The SDUC-style holder uses standard clamping practices for indexable inserts, allowing fast replacement and repeatable seating without extensive re-adjustment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid design and precise insert compatibility for efficient turning operations — the combination of a 25 mm cutting diameter, 20 mm shank and compatibility with DC-- 11T3 indexable inserts supports stable machining and quick tool changes. Order directly via Metav Werkzeuge or consult our technical team for application advice. Boring bar S20Q SDUCR — SDUC for DC-- Indexable Inserts, 25 mm × 180 mm The Boring bar S20Q SDUCR is a right-hand tool engineered for internal turning and boring operations using DC-- 11T3 indexable inserts, offering a compact profile for constrained setups and standard toolholder integration S20Q SDUCR boring bar, right-hand Compatible with DC-- 11T3 indexable inserts 25 mm cutting diameter, 180 mm overall length 20 mm shank diameter for standard toolholders Robust construction, 0.435 kg weight Stable machining through optimised geometry The S20Q SDUCR toolhead combines a 25 mm cutting diameter with a 20 mm shank to deliver enhanced rigidity in confined bores. The near‑orthogonal 93° cutting angle reduces side loading and helps maintain consistent tool engagement, which translates into repeatable bore diameters and less variance between parts. Compatibility with DC-- 11T3 indexable inserts allows straightforward insert replacement without affecting tool alignment, supporting steady production quality over extended runs. Reduced setup time and improved throughput Designed for systematic use in production environments, the bar permits fast insert changes and straightforward mounting in standard holders, lowering changeover times and keeping machines productive. The right‑hand cutting orientation matches common turning practices, while the compact 180 mm overall length makes the bar suitable where space is limited. These practical attributes support measurable efficiency gains and contribute to a predictable machining cycle time. Practical reliability for everyday turning A balanced mass of 0.435 kg and a compact design aid handling and fixture compatibility on the shop floor. The tool is specified for SDUC for DC-- Indexable Inserts, offering a proven interface between the body and the cutting grade chosen for the job. As part of a tooling system supplied by Teknik Makina, the bar fits into modular setups where interchangeability and maintenance speed are priorities, helping to sustain uptime and consistent surface finishes during serial production. Request a tooling recommendation from Metav Werkzeuge to confirm suitability for a specific application or to obtain complementary toolholder options; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Technical Data Article number: K130TM Name: Boring bar (SDUC for DC-- Indexable Inserts) ISO designation: S20Q SDUCR Facts Cutting diameter: 25 mm Shank diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Weight: 0.435 kg Cutting angle: 93° Special features Compatible with DC-- 11T3 indexable inserts Insert style: SDUC for DC-- Indexable Inserts Orientation: right-hand SKU: K130TM Brand: Teknik Makina FAQ Which insert type fits this boring bar? The S20Q SDUCR boring bar is specified for DC-- 11T3 indexable inserts and uses the SDUC insert style for secure seating and repeatable positioning. Is the tool suitable for confined or short-reach bores? Yes, the compact 180 mm overall length and 20 mm shank diameter make the bar appropriate for constrained bores and machines with limited tool clearance. What is the cutting orientation of the bar? The bar is a right‑hand cutting tool, designed to suit conventional turning directions in most lathe setups. How is the bar identified for ordering and inventory? Order or reference the item using the SKU K130TM and the ISO designation S20Q SDUCR for precise matching. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable geometry, precise compatibility with TC-- 16T3 indexable inserts and a compact 180 mm overall length for reliable internal turning operations; order the tool directly via Metav Werkzeuge or consult the specialists for application support. S20Q ST-CR Boring Bar – 25 mm diameter, for TC-- 16T3 inserts (Teknik Makina) The S20Q ST-CR boring bar is a right-hand, indexable-insert holder engineered for precision internal turning and finishing in standard workshop and industrial lathe setups S20Q ST-CR design for stable cutting 25 mm cutting diameter for internal bores Right-hand configuration for standard turning 180 mm overall length, 20 mm shank diameter Precision where it matters for internal turning The S20Q ST-CR boring bar offers a compact solution for precise internal machining. Its 25 mm cutting diameter and 20 mm shank ensure a rigid connection to the tool holder, which reduces vibration and improves surface finish. This rigidity translates into predictable dimensional results and fewer rejects in serial production, making the tool particularly suitable for components where concentricity and bore accuracy are critical. The short overall length assists in minimising overhang, thereby maintaining cutting stability on small to medium batch runs. Plug-and-produce compatibility with indexable inserts Designed specifically for TC-- 16T3 indexable inserts, the bar simplifies tooling logistics and setup time. Using standard indexable inserts means insert changes are fast and repeatable, reducing machine downtime and keeping cycle times consistent. The right-hand cutting configuration and a defined 60° cutting angle provide controlled chip formation and a reliable cutting edge engagement, which helps maintain insert life and reduces the need for frequent regrinding or replacement. Robust geometry for reliable workshop performance The tool’s geometry and cutting height 40 mm are chosen to ensure secure insert clamping and consistent chip evacuation. The controlled interface between insert and bar reduces the risk of chatter and increases tool life, supporting continuous production. With a 180 mm overall length and modest weight of 0.432 kg, the bar balances accessibility into bores with the structural stiffness required for finishing passes, delivering repeatable, high-quality results across a range of internal turning tasks. Practical integration into industrial workflows As a modular indexable-insert solution, this boring bar integrates smoothly into existing tooling systems, allowing maintenance teams to keep spares of TC-- 16T3 inserts and reduce procurement complexity. The combination of standard shank dimensions and ISO designation supports fast tool changes and consistent setup procedures on CNC lathes and turning centres. Where process reliability is a priority, the compact dimensions and proven design reduce setup variations and support predictable output for assembly or inspection stages. For technical consultation or purchasing of the S20Q ST-CR boring bar contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt expert assistance Technical data Article number: K182TM Manufacturer: Teknik Makina ISO designation: S20Q ST-CR For indexable inserts: TC-- 16T3 Cutting direction: right Facts Shank diameter: 20 mm Cutting diameter: 25 mm Overall length: 180 mm Cutting height: 40 mm Weight: 0.432 kg Cutting angle: 60° Special features Indexable-insert holder Right-hand configuration Compact design for reduced overhang Suitable for internal turning tasks FAQ Which inserts fit this boring bar? The S20Q ST-CR boring bar is designed for TC-- 16T3 indexable inserts; Teknik Makina specifies this insert form for correct seating and clamping. Is the bar suitable for small bores and finishing operations? Yes, the 25 mm cutting diameter and compact 180 mm overall length make the tool suitable for internal finishing and operations where reduced overhang is required. What shank size is required for mounting? A 20 mm shank diameter is specified for the bar; ensure the tool holder or adapter accepts a 20 mm shank for secure mounting. Does this tool cut left-handed operations? The bar is supplied in a right-hand cutting configuration; for left-hand requirements a different orientation must be selected. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a purpose-built combination of precision and stability: the left-hand STFC design offers secure clamping for TCMT 16T3 inserts while the Ø25 mm body and 20 mm shank improve rigidity and surface finish. Order directly via Metav Werkzeuge or contact our advisers for application-specific guidance. Boring bar K187TM – STFC for TCMT indexable inserts, left-hand, Ø25 mm A boring bar engineered for internal turning with TCMT 16T3 indexable inserts, optimised for left-hand cutting operations in CNC and conventional lathes. STFC design for TCMT 16T3 indexable inserts Left-hand cutting orientation for specific turning Ø25 mm diameter with 180 mm overall length 20 mm shank diameter, 32 mm cutting height Stable shank and clamping that reduce vibration, improve finish The bar features an S20Q STFCL shank profile with a 20 mm shank diameter to deliver enhanced rigidity during internal turning. Improved stiffness of the toolholder assembly reduces chatter and supports a more consistent surface quality on each workpiece. Less vibration results in prolonged insert life and fewer rework cycles, which translates into higher first-pass yields in serial production environments. The overall balance between mass and geometry is tuned for stable performance across typical machining feeds and speeds. Compatibility with TCMT 16T3 inserts for fast set-up and low tooling cost Designed specifically for TCMT 16T3 indexable inserts, the STFC configuration simplifies insert seating and removal. The 32 mm cutting height ensures correct engagement of the insert seat, helping to maintain the intended rake and clearance angles without complex adjustments. For shops that standardise on TCMT inserts, this reduces set-up time and inventory complexity, delivering measurable savings in tooling changeover and minimising machine downtime between batches. Compact dimensions that suit workshop workflows and tool magazines With a Ø25 mm body and 180 mm overall length, the tool balances reach and rigidity for common internal turning tasks. The modest mass of 0.44 kg makes handling and rapid tool changes straightforward while the compact envelope fits many turret and toolpost configurations. The included ISO designation (S20Q STFCL) clarifies compatibility with holders and simplifies procurement and documentation processes, ensuring reliable interchangeability across machines and teams. Application focus: consistent productivity in left-hand turning operations Optimised for left-hand cutting, the tool is intended for internal turning where a left-handed approach is required by the machining strategy or fixture layout. The bar is suitable for use on CNC lathes and manual machines that accept indexable insert tooling, providing a dependable platform for both roughing and semi-finishing when paired with the appropriate TCMT grade. The combination of geometry, clamping and nominal dimensions supports reproducible cycles and predictable tool-life planning, which aids process optimisation in production workshops. Contact Metav Werkzeuge to discuss how the Teknik Makina K187TM boring bar and matching TCMT 16T3 inserts can be integrated into current tool sets; call +49 2822 7131930 or email info@metav-werkzeuge.com for expert guidance and lead-time information Technical data SKU: K187TM Manufacturer: Teknik Cutting Tools / Teknik Makina Product: STFC for TCMT indexable inserts Core dimensions Diameter: 25 mm Shank diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Weight: 0.44 kg Cutting angle: 90° Features For TCMT 16T3 indexable inserts ISO designation S20Q STFCL Left-hand cutting orientation Clamping size reference: 16 FAQ Which indexable inserts fit this boring bar? The Teknik Makina K187TM boring bar is specified for TCMT 16T3 indexable inserts and is engineered to ensure correct seating and secure clamping for that insert size. Is the K187TM suitable for right-hand turning? The K187TM is configured for left-hand cutting; it is therefore intended for operations that require a left-hand approach rather than standard right-hand turning. What are the key dimensions to check for machine compatibility? Check the Ø25 mm body, 20 mm shank and 180 mm overall length of the K187TM against turret clearance and toolholder capacity to confirm fitment. Can this boring bar be used on manual lathes as well as CNC machines? Yes, the design of the K187TM supports usage on both CNC lathes and suitable manual machines that accept indexable-insert tooling and the stated shank and clamping dimensions. How does the S20Q STFCL designation affect selection? The S20Q STFCL ISO designation identifies the shank and head geometry, aiding compatibility checks with holders and simplifying procurement and tool change documentation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise internal turning, a rigid 20 mm shank and compatibility with 16 IR indexable inserts to improve cycle stability and reduce rework. Order the K354TM boring bar directly via Metav Werkzeuge or consult our specialists for application-specific setup. K354TM boring bar (S20Q STIR) — STI for IR/ER indexable inserts, 25 mm diameter The K354TM boring bar is a right-hand internal turning tool designed for STI holders and compatible with 16 IR indexable inserts, suited for workshop and CNC operations requiring controlled bore finishing 25 mm cutting diameter for internal bores 20 mm shank for rigid toolholder fit Compatible with 16 IR indexable inserts 180 mm overall length for deep reach Improved process stability through dimensional control The combination of a 25 mm cutting diameter and a 20 mm shank gives measurable gains in rigidity, translating into more consistent bore geometry and fewer rejected parts. Where internal turning requires tight tolerances, the STI interface for IR16 inserts minimises play between insert and pocket; this stabilisation reduces chatter and helps maintain surface finish across batch runs. For operations converting from brazed or solid tools to indexable tooling, this configuration balances ease of insert replacement with maintained cutting performance. Robust design that supports longer tool life and predictable cycles Engineered with the ISO designation S20Q STIR, the bar offers a compact profile and a 180 mm overall length that delivers reach without excessive overhang. Right-hand cutting geometry is optimised for common lathe set-ups and supports conventional feed strategies. The tool’s mass (0.436 kg) contributes to damping while remaining light enough for responsive spindle dynamics. Use of standard IR16 clamping interfaces ensures inserts seat consistently, which both lowers setup times and preserves insert life by preventing micro-movements that accelerate wear. Practical integration into workshop workflows This tool is suited to production environments and skilled workshops that require repeatable internal turning solutions. The STI-compatible design simplifies insert changes and toolstock management when paired with standard IR/ER holders. As part of a coordinated tooling strategy, the bar reduces downtime for regripping and enables rapid changeovers. For teams refining cycle time and surface specification, the tool’s stable interface aids in predictable machining and easier process documentation for quality control. Discuss machining requirements with Metav Werkzeuge to specify inserts and holder set-up for the K354TM boring bar and ensure optimal performance in the intended application; contact Metav Werkzeuge by e‑mail or phone for technical advice and order placement Technical data SKU: K354TM Manufacturer: Teknik Cutting Tools Product: Boring bar (Bohrstange) ISO designation: S20Q STIR Type: STI for IR/ER indexable inserts Measurements Cutting diameter: 25 mm Shank diameter: 20 mm Cutting edge height: 40 mm Overall length: 180 mm Weight: 0.436 kg Cutting direction: right-hand Special features Compatible inserts: 16 IR Toolholder reference: IR16 eClass: 21180806 FAQ Which inserts fit this boring bar? The K354TM boring bar accepts 16 IR indexable inserts and is specified for STI-style insert seats to suit IR/ER insert geometries. Is the cutting direction suitable for standard lathe operations? Yes, the tool features a right-hand cutting orientation, compatible with conventional internal turning set-ups on most lathes and CNC turning centres. What is the ISO designation and why does it matter? The ISO designation S20Q STIR identifies the bar’s shank and insert interface standard, helping to ensure correct holder compatibility and predictable clamping behaviour in STI systems. How deep can this bar reach reliably? With an overall length of 180 mm, the bar is designed for moderate-depth internal turning where a balance between reach and rigidity is required; reach must be assessed relative to machine and holder overhang. Which toolholder should be used with the K354TM? Use an IR16-compatible holder or an STI-type adapter designated for IR/ER inserts to maintain correct clamping and insert seat stability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise compatibility with VBMT 1103 indexable inserts, the rigid shank Ø20 mm for stable cutting and the compact 180 mm overall length for reliable reach; order the boring bar directly via Metav Werkzeuge or ask their consultants for further specification. Boring bar SVQB for VBMT indexable inserts (S20Q SVQBL) — Left-hand, Ø25 mm cutting diameter, 180 mm overall length A Boring bar SVQB for VBMT indexable inserts engineered for external turning and facing operations that require a left-hand cutting orientation and secure clamping for predictable chip formation Left-hand cutting direction For VBMT 1103 indexable inserts Ø25 mm cutting diameter 180 mm overall length Precise fit and compatibility for indexable-insert machining The holder is built around the ISO designation S20Q SVQBL to ensure standardised integration in machining setups and compatibility with the commonly used VBMT 1103 indexable inserts. This defined interface reduces setup time and minimises the risk of mismatch between insert and holder, delivering a predictable cutting result. The left-hand cut geometry is intended for operations where reverse-direction machining improves access or tool path strategy; pairing the correct insert grade with the holder’s seating ensures the insert sits securely and that the intended rake and clearance angles are maintained for efficient chip control. Rigid shank and geometry that improve process stability A shank Ø20 mm combined with a Ø25 mm cutting diameter and a modest 180 mm overall length provides a stiff tool geometry that reduces vibration and promotes surface finish consistency. The cutting height 30 mm and a cutting angle of 107.5° are balanced to support stable engagement of the indexable insert while limiting deflection under radial load. The holder’s mass of 0.422 kg contributes to damping without adding unnecessary bulk, which benefits repeatability on longer production runs and when machines alternate between heavier and lighter passes. Straightforward workshop integration and safe handling The bar’s clear designation and simple interface make it easy to catalogue and deploy across a workshop environment where multiple indexable holders are used. The combination of standard dimensions and robust clamping reduces fixture changes and supports faster tool exchanges on production lines. As the holder is designed specifically for VBMT-type inserts, maintenance routines are simplified: insert replacements and re-clamping follow the same, repeatable steps, limiting downtime and helping to sustain throughput in small-batch or continuous production contexts. For a tailored recommendation or to check compatibility with specific insert grades, contact Metav Werkzeuge — their consultants will advise on the right tooling setup and supply options for Teknik Makina holders. Technical data Article number: K312TM Manufacturer: Teknik Makina Product name: Boring bar / SVQB for VBMT indexable inserts ISO designation: S20Q SVQBL Facts Cutting diameter: 25 mm Shank diameter: 20 mm Overall length: 180 mm Cutting height: 30 mm Weight: 0.422 kg Cutting angle: 107.5° Cutting direction: left Special features For VBMT 1103 indexable inserts Left-hand orientation ISO-compatible mounting Compact length for improved stiffness FAQ Which inserts fit this holder? The holder is compatible with VBMT 1103 indexable inserts; the seat and clamping are designed to accept that insert form for secure mounting. Is this a left-hand or right-hand tool? It is a left-hand tool; the geometry and designation indicate a left-hand cutting direction for reverse turning operations. What are the key dimensions to check for machine compatibility? Relevant dimensions are Ø25 mm cutting diameter, shank Ø20 mm and 180 mm overall length; verify the machine’s tool post or turret capacity against these values. What is the ISO designation for ordering and documentation? The ISO designation is S20Q SVQBL, which should be used for procurement, documentation and matching to tool lists. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-rigidity design with Ø25 mm cutting diameter and a Ø20 mm shank for reliable insert clamping; compatible with VBMT 1103 indexable inserts — order directly via Metav Werkzeuge or consult our specialists for application guidance. Boring bar K217TM – S20Q SVQBR for VBMT indexable inserts (right-hand) Boring bar K217TM provides a right-hand solution for internal turning where indexable VBMT 1103 inserts are required S20Q SVQBR shank Ø20 mm Cutting diameter 25 mm Compatible with VBMT 1103 inserts Right-hand cutting, 180 mm overall length Stable geometry for precision internal turning The K217TM is engineered with a sturdy S20Q SVQBR shank and a compact overall length of 180 mm, offering a balance of rigidity and accessibility for confined bores. A Ø20 mm shank minimises vibration when clamped in suitable holders, while the Ø25 mm cutting diameter and 30 mm cutting height ensure consistent seat engagement for VBMT-style indexable inserts. The specified cutting angle of 107.5° helps to control cutting forces and chip flow in typical internal turning operations, which translates into improved surface finish and repeatability on serial parts. Designed for indexable-insert workflows and fast servicing This tool is intended for indexable-insert systems using VBMT 1103 inserts, enabling quick insert changes and predictable tool life management. The insert compatibility reduces setup time compared with solid-tool replacements and supports standardised inventory across turning centres. The right-hand orientation is suitable for standard lathe and CNC turning cycles that require conventional turning direction. The nominal weight of 0.422 kg and the clear ISO designation S20Q SVQBR simplify tool management and documentation in tool cabinets and CAM setups. Practical handling and workshop advantages With a 30 mm cutting height and a compact profile, the boring bar offers straightforward seating and consistent clamp engagement in holders designed for this form. The modest overall mass and defined geometry make balancing and fixture planning simpler for production and maintenance teams. As part of an indexable system, the component supports predictable replacement intervals and reduces non-productive time, which is advantageous for batch production and job-shop environments looking to improve throughput without complex retooling. Contact Metav Werkzeuge today to confirm the K217TM’s suitability for specific insert grades and machining tasks, or request tailored technical advice from our application consultants who manage tooling solutions from Emmerich to your workshop. Technical Data SKU: K217TM Manufacturer: Teknik Makina Model (ISO): S20Q SVQBR Article name: SVQB for VBMT Indexable Inserts Key measurements Shank diameter: 20 mm Cutting diameter: 25 mm Cutting height: 30 mm Overall length: 180 mm Weight: 0.422 kg Cutting angle: 107.5° Cutting direction: right Features Compatible with VBMT 1103 inserts Indexable-insert boring bar design Right-hand cutting orientation Compact, workshop-friendly dimensions FAQ Which inserts are compatible with this boring bar? The boring bar is compatible with VBMT 1103 indexable inserts; VBMT geometry is supported by the S20Q SVQBR seat and clamp design. What is the ISO designation and why does it matter? ISO designation S20Q SVQBR identifies the shank form and mounting standard, simplifying selection of matching toolholders and ensuring correct seating for indexable inserts. Is this tool right- or left-hand cutting? The tool is specified for right-hand cutting, suitable for conventional turning directions on lathes and CNC turning centres. What are the key dimensions to check when selecting a holder? Check the Ø20 mm shank, overall length 180 mm, and the 30 mm cutting height to ensure correct clamp fit and insert seating in the chosen holder. How does the cutting angle influence machining? The 107.5° cutting angle affects force direction and chip formation; it is designed to provide balanced cutting action and consistent surface quality for internal turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise compatibility with VCMT indexable inserts, a robust ISO S20Q SVQCR construction and compact dimensions that support stable, repeatable turning cycles. Combine reliable clamping and a right-hand cutting geometry for consistent surface finish and reduced set-up time. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring Bar — SVQC for VCMT Indexable Inserts by Teknik Makina, Ø25 mm, 180 mm A Boring Bar designed for turning applications with SVQC clamping for VCMT 1103 indexable inserts, optimised for right-hand cutting in conventional and CNC lathes. Suitable for VCMT 1103 inserts Right-hand cutting geometry Ø25 mm cutting diameter 180 mm overall length Precise insert pairing for reproducible turning results The SVQC clamping concept delivers secure seating for VCMT 1103 indexable inserts, reducing micro-movement at the cutter and improving repeatability. The holder’s ISO designation S20Q SVQCR reflects a standardised shank and clamping layout that simplifies tool selection across workshops. With a clear focus on repeatable geometry, this toolholder converts insert properties into predictable part tolerances, making it suitable for batch production and finishing operations where consistent dimensions matter. Stable cutting geometry for improved surface quality A cutting angle of 107.5° and right-hand cutting configuration provide a stable rake and controlled chip flow, which supports a cleaner surface finish and reduced chatter on straight and slightly overhung setups. The Ø25 mm cutting diameter combined with a 30 mm cutting height reduces deflection during light to moderate turning passes. This configuration is especially beneficial when finishing turned surfaces or producing stepped bores where dimensional accuracy and surface integrity are priorities. Compact footprint for flexible workshop integration With an overall length of 180 mm and a shaft diameter of 20 mm, the turning holder fits compact tool posts and turret stations while keeping the centre of mass close to the spindle. The modest mass (approx. 1.762 kg) helps lower vibration sensitivity compared with longer, heavier holders, improving stability without sacrificing accessibility. These dimensions make the component a pragmatic choice for mixed-use lathes where tool changes and space optimisation are frequent operational concerns. Production-ready features that reduce downtime The clamping designation (11) and the SVQC interface are engineered for quick insert seating and secure retention, shortening changeover times and reducing setup complexity on the shop floor. As the holder is matched to common VCMT 1103 inserts, inventory management becomes simpler and tool provisioning more transparent. The combination of standardised ISO form, compact length and reliable clamping results in faster process stabilisation and less time spent on trial cuts. For precision turning with Teknik Makina’s S20Q SVQCR holder, contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number (SKU): K222TM Manufacturer: Teknik Makina Product type: Boring bar — SVQC for VCMT indexable inserts ISO designation: S20Q SVQCR Cutting direction: right Core data Cutting diameter: 25 mm Shaft diameter: 20 mm Cutting height: 30 mm Overall length: 180 mm Weight: 1.762 kg Cutting angle: 107.5° Special features Compatible with VCMT 1103 indexable inserts SVQC clamping interface for secure insert seating Right-hand cutting geometry Clamping designation: 11 Suitable for standard turning and finishing tasks FAQ Which indexable inserts fit this holder? The holder is specified for VCMT 1103 inserts; the SVQC clamping secures the insert for reliable contact and chip control. Is the cutting geometry right- or left-hand? This turning holder is manufactured for right-hand cutting operations, with a cutting angle of 107.5° optimised for standard lathe directions. What are the key dimensions to check for machine compatibility? Key measures are the overall length 180 mm, shaft diameter 20 mm and cutting diameter 25 mm; these determine fit in the turret and the expected overhang. What does the ISO code S20Q SVQCR indicate? The ISO code denotes the shank size and clamping style; S20Q SVQCR signals a standard 20 mm shank form with the SVQC clamping arrangement used for indexable insert turning. Will this holder reduce vibration compared with longer alternatives? The compact 180 mm length and moderate mass contribute to lower deflection and reduced vibration compared with longer holders, improving surface finish in many typical setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable internal turning is assured by the combination of a 20 mm shank, compatibility with VBMT 1103 indexable inserts and a stiff 180 mm overall length; order the K207TM directly via Metav Werkzeuge or contact our technical consultants for tailored application guidance. K207TM Boring Bar by Teknik Makina — 20 mm shank, 180 mm overall length The K207TM Boring Bar is a right-hand SVUB holder engineered for VBMT 1103 indexable inserts, optimised for stable internal turning and finishing operations in CNC setups. Right-hand cutting for clean internal turning Compatible with VBMT 1103 indexable inserts 20 mm shank for stable clamping in holders 180 mm overall length for deep reach Built for rigidity and repeatable bore quality A compact holder with a 20 mm shank and a 25 mm diameter body provides measurable stiffness, which reduces vibration and improves surface finish. The combination of a tight shank fit and a defined cutting angle of 93° means that axial and radial loads are better absorbed; as a result, bore concentricity and repeatability are improved. This stability translates into fewer scrap parts and less rework, a rational advantage when process reliability is top priority. Fast insert changes and clear compatibility The tool is specified for VBMT 1103 indexable inserts and carries the ISO designation S20Q SVUBR, indicating the SVUB-style pocket geometry for those inserts. Indexable inserts offer quick replacement and consistent edge geometry without full regrinding, so tool-change downtime is minimised. The holder accepts the standard clamp designation 11, allowing straightforward integration into common clamping systems and reducing setup complexity in the workshop. Practical workshop benefits and process fit Designed as a right-hand tool for internal turning, the boring bar balances reach and stiffness with its 180 mm overall length and modest mass of 0.7 kg, making it suitable for medium-depth bores where access and stability must be balanced. The SVUB pocket design maintains secure engagement of the insert, so stable clamping and predictable cutting behaviour are achieved. For production environments seeking consistent cycle times, the holder’s geometry supports reproducible cuts and efficient tool life management. For precise, workshop-ready boring with Teknik Makina’s K207TM, contact Metav Werkzeuge for specification matching and reliable supply from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: K207TM Manufacturer: Teknik Makina Designation: SVUB for VBMT Indexable Inserts ISO designation: S20Q SVUBR Cutting direction: right For inserts: VBMT 1103 Data Shank diameter: 20 mm Cutting height: 32 mm Weight: 0.7 kg Diameter: 25 mm Overall length: 180 mm Cutting angle: 93° Clamp designation: 11 Special features Right-hand cutting orientation Compatible with VBMT 1103 indexable inserts SVUB pocket geometry for secure clamping Designed for internal boring and finishing FAQ Which inserts are compatible with this boring bar? The K207TM boring bar is compatible with VBMT 1103 indexable inserts and is specified for SVUB pocket geometry. What is the shank diameter and why does it matter? The shank diameter is 20 mm; a thicker shank increases rigidity and reduces vibration, which improves bore accuracy and surface finish. Is the tool configured for right- or left-hand cutting? This holder is set up for right-hand cutting, suitable for standard internal turning directions on most lathes and CNC machines. What is the ISO designation of the holder? The tool carries the ISO designation S20Q SVUBR, which defines the shank form and the SVUB-style insert pocket. What are the overall length and weight of the tool? The overall length is 180 mm and the weight is approximately 0.7 kg, offering a balance between reach and stiffness for medium-depth bores. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

A compact combination of rigidity and insert compatibility ensures stable left‑hand turning; the 20 mm shank and 180 mm overall length support accurate machining with VCMT 1103 inserts. Order directly via Metav Werkzeuge or consult our technical advisors for specification matching. SVUC Boring Bar (S20Q SVUCL) — for VCMT 1103 indexable inserts, left‑hand cut (Teknik Makina) The SVUC for VCMT Indexable Inserts (S20Q SVUCL) is a left‑hand boring bar engineered for accurate external turning and grooving tasks in general workshop and light industrial applications. 20 mm shank for high rigidity Compatible with VCMT 1103 inserts 180 mm overall length for reach Left‑hand cutting orientation Consistent rigidity for predictable turning performance The combination of a 20 mm shank and the bar's balanced geometry delivers stable clamping and reduced vibration during cutting, which improves surface finish and tool life. With a cutting height of 32 mm and a compact mass of 0.432 kg, this tool holder maintains support for the insert under load while remaining manoeuvrable for set‑up and changeover. In practical terms, the stiffer shank reduces chatter on small‑ to medium‑diameter workpieces and helps to preserve machining tolerances. Broad insert compatibility reduces tooling complexity Designed specifically for VCMT 1103 indexable inserts, the holder accepts standard triangle‑type inserts to enable fast index changes and economical regrinding cycles. The S20Q SVUCL ISO format means replacement inserts and seat geometry conform to widely used standards, simplifying procurement and inventory management. For workshops upgrading tooling systems, this compatibility lowers the barrier to adopting indexable insert technology and shortens downtime caused by insert handling. Optimised for left‑hand cutting and specific toolpaths With a left‑hand cutting direction and an effective 93° cutting angle, the bar is suited to operations where the spindle rotation and feed produce right‑to‑left material removal or when machine set‑up demands a left‑hand tool. The nominal 25 mm diameter at the working end combined with the geometry supports predictable chip evacuation and stable engagement, which is particularly helpful when machining interrupted cuts or facing contours that require consistent contact. Practical benefits for efficient workshop use The 180 mm overall length offers additional reach for turned features without excessive overhang, allowing access to deeper sections while keeping deflection low. The tool's S20Q SVUCL designation and the clear compatibility with VCMT inserts make it straightforward to pair with existing clamping systems and insert stocks. The result is a reduction in set‑up time and simpler logistics for repeat production runs or small batch work. For precise left‑hand turning operations, choose the Teknik Makina S20Q SVUCL boring bar — contact Metav Werkzeuge for tailored advice or to arrange supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: K302TM Manufacturer: Teknik Makina ISO designation: S20Q SVUCL For inserts: VCMT 1103 Facts Shank diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Diameter: 25 mm Weight: 0.432 kg Cutting angle: 93° Cutting direction: left Special features Compatible with VCMT 1103 indexable inserts Left‑hand cutting orientation ISO format S20Q SVUCL Clamping holder designation: 11 FAQ What insert type fits this boring bar? The SVUC for VCMT Indexable Inserts accepts VCMT 1103 inserts; the S20Q SVUCL seat and clamping geometry are designed for that insert form factor. Is the bar suitable for deep‑reach turning? With an overall length of 180 mm and a 20 mm shank, the boring bar provides extended reach while maintaining stiffness for shallow to moderately deep turning tasks. Which cutting direction does the tool require? This tool is configured for left‑hand cutting; ensure machine rotation and programme direction match this orientation for safe operation. How does the 20 mm shank affect performance? The 20 mm shank increases rigidity compared with smaller shanks, reducing vibration and improving surface finish and tool life in many turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of stable clamping, compatibility with WN-- 0604 indexable inserts and a compact 200 mm length for reliable turning operations; order the boring bar directly via Metav Werkzeuge or contact our consultants for specification advice. Boring Bar S20R MWLNR – Indexable insert tool holder, 20 mm shank (Teknik Makina) The Boring Bar S20R MWLNR is a right-hand tool holder engineered for turning operations with MWLN-style indexable inserts, designed to provide stable cutting and accurate bore finishing in workshop and production environments S20R MWLNR designation for secure fit Fits WN-- 0604 indexable inserts 20 mm shank diameter for stable clamping 200 mm overall length for deep bore access Consistent rigidity for predictable machining results The S20R MWLNR designation signals a tool engineered for precision and repeatable performance. With a 20 mm shank, the tool offers increased stability at the toolpost, which reduces vibration and supports a consistent surface finish and longer insert life. In practical terms, greater rigidity means fewer rework cycles and steadier cycle times on serial turning tasks; this is an efficiency gain that pays off across production runs. The lightweight mass of 0.502 kg also aids handling during set-up without compromising clamp stability. Economical tooling through standardised insert compatibility Using indexable inserts with a standard geometry keeps tooling costs under control. The bar is compatible with WN-- 0604 inserts in an MWLN pocket, allowing quick insert changes and easy stocking of replacement items. For teams unfamiliar with indexable tooling: inserts are replaceable cutting tips that eliminate the need to regrind the whole tool, so downtime is reduced and tool inventory becomes modular. This approach supports predictable operating costs and faster turnaround in maintenance cycles. Designed for access and controlled cutting action A 200 mm overall length and a nominal 25 mm diameter profile enable access to deeper bores while maintaining control over chip flow. The tool presents a 95° cutting angle and is set up for right-hand cutting, which suits most conventional lathe feed directions. The specified cutting height 50 mm helps ensure the insert sits correctly in the toolholder geometry, supporting consistent engagement with the workpiece and reliable material removal rates. These dimensions help machinists plan fixture clearances and optimise approach angles for best surface integrity. Smooth integration into workshop tooling systems The bar is supplied to the S20R MWLNR ISO designation, which simplifies matching to existing toolholders and holders compliant with the same standard. Assembly and changeover routines become straightforward when components follow common formats, supporting faster set-ups and higher machine availability. As a Teknik Makina product, the component benefits from a clear production specification and is distributed via Metav Werkzeuge, whose European stock and logistics act as a quality filter for reliable supply chains and reduced lead times. For reliable, stable turning with Teknik Makina tooling, contact Metav Werkzeuge to check availability, request purchasing on account, or to discuss integration into your toolroom at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: K427-1TM Manufacturer: Teknik Makina ISO designation: S20R MWLNR Facts Shank diameter: 20 mm Overall length: 200 mm Diameter: 25 mm Cutting direction: right Cutting angle: 95° Cutting height: 50 mm Weight: 0.502 kg Special features Compatible with WN-- 0604 indexable inserts For MWLN insert geometry Right-hand machining application Compact length for deeper bore reach FAQ What inserts are compatible with this boring bar? The bar accepts WN-- 0604 indexable inserts in an MWLN seat, enabling simple tip changes and standardised stocking. Is this tool suitable for right-hand turning operations? Yes, the toolholder is configured for right-hand cutting and is intended for conventional lathe feed directions. What are the key dimensions to check for machine setup? Check the 20 mm shank diameter, 200 mm overall length and the 95° cutting angle to ensure correct clamping and approach geometry. How does the S20R MWLNR improve tool changeover times? Using standard indexable inserts reduces downtime because worn tips are replaced quickly, maintaining productive machine time. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a robust S20R PWLNR shank, compatibility with WNMG 0604 indexable inserts and a 200 mm overall length for stable external turning; order the boring bar directly via Metav Werkzeuge or consult the team for application advice. Boring bar PWLN for WNMG Indexable Inserts — S20R PWLNR, 20 mm shank A boring bar PWLN for WNMG indexable inserts designed for external turning with WNMG 0604 inserts, offering a compact 200 mm length for confined setups and a 95° cutting angle for secure insert seating S20R PWLNR shank with 20 mm diameter Compatible with WNMG 0604 indexable inserts Right-hand cutting direction, 95° cutting angle 200 mm overall length for stable external turning Stable clamping and predictable results for production turning The design centres on a proven ISO designation S20R PWLNR, which combines a rigid 20 mm shank with a controlled cutting height of 40 mm to maintain edge contact during heavy passes. This geometry reduces chatter and improves surface finish, so the toolholder delivers consistent part quality. By pairing the tool with WNMG 0604 indexable inserts, tool changes are fast and repeatable, supporting high first-pass yield in batch production and reducing rework rates. Faster set-up and simplified tool management on the shop floor A compact 200 mm overall length minimises overhang and increases stiffness at the insert tip, which supports higher metal removal rates while preserving insert life. The right-hand cutting direction and a defined 95° interface ensure correct insert orientation and secure clamping without complex adjustments. For production planners, this results in shorter set-up times and fewer fixture modifications, improving throughput without sacrificing stability. Practical design to cut downtime and streamline maintenance Compatibility with standard WNMG 0604 inserts keeps stocking simple and reduces supplier variety, while the clearly specified shaft diameter: 20 mm and the klemmhalter designation 06 facilitate straightforward mounting in common tool posts and holders. At 0.502 kg the assembly is easy to handle during changeover, and the robust construction supports reliable performance across repetitive cycles, making the boring bar a pragmatic choice for workshops seeking predictable tooling behaviour. Contact Metav Werkzeuge today to discuss the S20R PWLNR boring bar (SKU P382TM) for specific machining scenarios or to request tailored application guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P382TM ISO designation: S20R PWLNR Product name: PWLN for WNMG Indexable Inserts Manufacturer: Teknik Makina Facts Shaft diameter: 20 mm Cutting height: 40 mm Overall length: 200 mm Weight: 0.502 kg Cutting angle: 95° Diameter: 25 mm Special features For WNMG 0604 indexable inserts Right-hand cutting direction Klemmhalter designation 06 Compact design for reduced overhang FAQ What inserts fit this boring bar? The boring bar PWLN for WNMG indexable inserts is designed to accept WNMG 0604 inserts, providing a standardised and fast-change solution for external turning tasks. Which shank size is specified for stable clamping? A 20 mm shank (ISO S20R PWLNR) ensures rigid clamping and reduced vibration when mounted in compatible tool posts. Is the cutting direction selectable? This toolholder is manufactured for a right-hand cutting direction to match conventional turning orientations in most lathes. How does the 95° cutting angle affect insert seating? The 95° seat secures the insert at a stable inclination, improving resistance to edge lift and enabling reliable engagement during higher feeds. Can this boring bar be used in tight setups? With a 200 mm overall length and a compact profile, the bar is well suited for confined spaces where reduced overhang improves rigidity and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com