Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a robust combination of a 25 mm shank, internal coolant and a 120 mm overall length to improve tool stability and reduce changeovers; order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for BDMT 1704 indexable inserts — 25 mm, internal coolant (Teknik Makina) A shank milling cutter designed for secure clamping and efficient coolant-fed machining with BDMT 1704 indexable inserts in general machining applications. 25 mm shank diameter for secure clamping Internal coolant for reliable chip evacuation Compatible with BDMT 1704 inserts (Kyocera) 120 mm overall length, 35 mm cutting length Precision and performance for productive milling The tool delivers consistent cutting performance thanks to its 25 mm shank and compact geometry. A sturdy shank diameter increases clamping rigidity, which in turn reduces vibration and improves surface finish during interrupted or continuous milling. With 2 cutting edges, the cutter offers an effective balance between metal removal rate and economical insert usage, enabling predictable cycle times on CNC milling machines and workshop mills. Controlled coolant for consistent surface quality Integrated internal coolant channels supply coolant directly to the cutting zone, improving chip evacuation and heat control at the insert edge. This targeted coolant feed reduces built-up edge and helps maintain flank and rake face condition, which extends insert life and reduces downtime for tool changes. The design also lowers the risk of recutting chips, producing a more consistent surface quality across batches. Insert compatibility and straightforward servicing The diameter and pocket geometry are configured for BDMT 1704 indexable inserts and are compatible with inserts from Kyocera, simplifying procurement and stocking. Replacement and clamping use a Torx drive (T15) and M4x8.5 screw for secure, repeatable fixing of the insert heads; this results in quick servicing intervals and predictable torque values for assembly. The cutter’s SKU S578-1TM identifies the configuration for ordering and spare-part matching. Reach, rigidity and workshop advantages With a 120 mm overall length and 35 mm cutting length, the tool provides useful reach without compromising stiffness for many slotting and face-milling tasks. The combination of compact length and coolant-fed design supports higher productivity on medium-duty operations while maintaining process reliability. The modest mass and proven geometry also make the tool a pragmatic choice for consolidating tool assortments in a busy production environment. For precision milling with internal coolant and reliable insert compatibility, contact Metav Werkzeuge to discuss the Teknik Makina S578-1TM shank milling cutter and delivery options from Emmerich. Technical data Article number: S578-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Facts Diameter: 25 mm Shank diameter: 25 mm Overall length: 120 mm Cutting length (shank): 35 mm Number of cutting edges: 2 Weight: 0.432 kg Special features Internal coolant: yes Compatible inserts: BDMT 1704 Compatible insert manufacturer: Kyocera Torx key: T15 Torx screw: M4x8.5 FAQ What insert type does this cutter use? The cutter is configured for BDMT 1704 indexable inserts; Kyocera-compatible grades are commonly fitted to this tool. Is the coolant internal or external? This model features internal coolant, supplying fluid directly to the cutting edge to assist chip removal and edge life. How is the insert secured and which tools are required? Inserts are fixed with an M4x8.5 screw driven by a T15 Torx key for secure, repeatable clamping on the S578-1TM. What are the key dimensions to check before mounting? Check the 25 mm shank diameter, 120 mm overall length and the 35 mm cutting length to ensure suitable clearance and rigidity on the machine. Is this tool suitable for high-production environments? The coolant-fed design and robust shank make this cutter appropriate for repetitive milling tasks where reduced tool changes and consistent edge performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 25 mm shank combined with internal coolant and a compact 30 mm cutting length for stable, high-output milling operations; order directly via Metav Werkzeuge or contact our consultants for application advice. Shank cutter S483-1TM – for BLMP 0603 indexable inserts, internal coolant (Teknik Makina) Shank cutter S483-1TM is a purpose-built 25 mm shank milling cutter for BLMP 0603 indexable inserts, designed for reliable chip evacuation and consistent tool performance in demanding production settings. *25 mm shank diameter for rigid toolholding *Internal coolant for improved tool life *Compatible with BLMP 0603 indexable inserts *150 mm overall length with 4 cutting edges Consistent cooling and stable chip evacuation Equipped with internal coolant, this tool channels cutting fluid directly to the cutting zone to reduce heat generation and support stable chip formation. The controlled coolant supply helps to extend insert life and maintain a consistent surface finish under continuous machining, which in turn improves process reliability and reduces unscheduled tool changes. The tool’s fluid-fed design is particularly effective where thermal stability is critical for dimensional accuracy. Secure clamping and straightforward insert system The 25 mm shank provides a rigid connection to the toolholder for minimal deflection at higher feeds, enabling more aggressive cutting parameters where chassis stiffness permits. Inserts are secured with an M3x6.2 screw tightened using a Torx T8, allowing quick, repeatable clamping and reduced changeover times. The cutter accepts BLMP 0603 indexable inserts and is compatible with inserts from Taegutec, facilitating supply chain flexibility for production customers. Efficient cutting geometry for reliable material removal Featuring 4 cutting edges, the cutter balances material removal rate with tool life, enabling steady performance across longer tool runs. The design concentrates the cutting forces into a compact 30 mm cutting length, which helps maintain rigidity in slotting and light shoulder milling operations. Surge suppression during intermittent cuts is achieved through harmonised geometry, delivering repeatable results and predictable tool wear patterns for process planning. Low-maintenance operation and fast serviceability The retention system and internal coolant routing are engineered for straightforward maintenance: inserts are replaceable without disturbing the tool’s mounting, and the internal coolant ports reduce external clogging. The combination of accessible fasteners and a standardised insert system reduces downtime and simplifies inventory management on the shop floor, supporting higher machine utilisation and more consistent throughput. For reliable production performance with the Teknik Makina shank cutter featuring internal coolant, contact Metav Werkzeuge for tailored technical advice or to arrange supply from our Emmerich warehouse — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: S483-1TM Product type: Shank cutter Designation: for BLMP 0603 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 30 mm Cutting edges: 4 Weight: 0.281 kg Special features Internal coolant Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Torx key: T8 Fastening screw: M3x6.2 FAQ What inserts fit this cutter? The shank cutter S483-1TM accepts BLMP 0603 indexable inserts and is specified to be compatible with Taegutec insert grades. Is coolant routed through the tool? Yes, the tool features internal coolant to deliver cutting fluid directly to the cutting zone for improved insert life and consistent results. What is the shank size and how does it affect performance? The tool has a 25 mm shank, offering rigid clamping to reduce deflection and enable stable machining at elevated feed rates. How many cutting edges are available and what are the benefits? The cutter has 4 cutting edges, balancing material removal rate with economical insert usage and predictable wear behaviour. Which fastener and key are required for insert changes? Insert fixation uses an M3x6.2 screw and is tightened with a Torx T8, ensuring secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable clamping, a 25 mm shank and internal coolant for reliable, high‑throughput milling. Benefit from compatibility with LNMU 0303 indexable inserts and the proven supply chain of Metav Werkzeuge — order directly via Metav Werkzeuge or request tailored advice from our consultants. Shank milling cutter for LNMU 0303 indexable inserts by Teknik Makina — 25 mm shank, internal coolant The Shank milling cutter is a precision tool designed for milling operations using LNMU 0303 indexable inserts, optimised for stable clamping and effective coolant delivery. 25 mm shank diameter Internal coolant supply Compatible with LNMU 0303 inserts Torx T8 fastening, M2.5x7 screws Precise insert compatibility for predictable production results This milling tool is engineered to accept LNMU 0303 indexable inserts, ensuring repeatable geometry and quick insert changes. The combination of a 25 mm shank and a well‑balanced cutter body reduces vibration and improves surface finish, which directly supports consistent cycle times and fewer rejected parts. For workshops and production lines that require predictable outcomes, the design translates into lower setup variance and faster changeover between jobs. Internal coolant for improved edge life and chip control Equipped with internal coolant, the cutter directs fluid close to the cutting zone to reduce tool temperature and flush chips efficiently from the insert pocket. This cooling method helps extend insert life and maintain cutting performance during longer operations, decreasing unplanned stoppages. The result is a measurable improvement in throughput where thermal stability and chip evacuation are critical to maintain tolerances and surface quality. Simple, secure fastening and maintenance for minimal downtime Assembly and insert replacement are straightforward: the cutter uses a Torx T8 key and M2.5x7 screws for secure fixation. With four cutting edges and a 60 mm cutting length, the geometry supports both roughing and light finishing passes when paired with appropriate inserts. The accessible fastening system minimises maintenance time and reduces the risk of incorrect assembly, which is beneficial for busy toolrooms and production environments where uptime is essential. Suited to industrial milling workflows and quick changeovers Designed for use in workshop and industrial milling setups, this shank milling design supports fast insert swaps and integration into toolholder systems common on milling machines. The tool’s specifications, including overall length and shank stability, make it a practical choice for repetitive production tasks where tool reliability and consistent clamping are priorities. Combined with compatible inserts from recognised manufacturers, it contributes to an efficient tooling concept that reduces inventory complexity. Contact Metav Werkzeuge today to discuss technical matching with existing toolholders or to request matched insert recommendations based on Teknik Makina’s shank milling cutter; reach our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: S675-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Designation: Schaftfräser for LNMU 0303 Indexable Inserts Dimensions & Core Data Diameter: 25 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.589 kg Features & Compatibility Internal coolant: Yes Compatible inserts: LNMU 0303 Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 FAQ Is this cutter compatible with Tungaloy LNMU 0303 inserts? Yes. The shank milling cutter is designed for LNMU 0303 indexable inserts and is listed as compatible with inserts from Tungaloy; use the specified insert type for correct fit and performance. Does the tool provide internal coolant supply? Yes. The cutter features internal coolant to direct fluid to the cutting zone for improved tool life and chip evacuation. What fastening hardware is required for the inserts? Insert fastening uses a Torx T8 key with M2.5x7 screws; the cutter is supplied to accept this standard fastening configuration for secure, repeatable clamping. What are the key dimensions to consider when planning toolholders? Key dimensions are a 25 mm shank diameter, 150 mm overall length and a 60 mm cutting length; consult these values when selecting a compatible toolholder or extension. Which SKU and manufacturer details identify this item? The tool is listed under SKU S675-1TM and supplied by Teknik Makina; these identifiers should be used when ordering or requesting technical data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, 25 mm shank stability and compatibility with LNMX 1004 indexable inserts for reliable, high‑feed milling; order the cutter directly via Metav Werkzeuge or consult our technical advisers for application support. Indexable Insert Milling Cutter S094TM — 25 mm shank, internal coolant (Teknik Makina) The Indexable Insert Milling Cutter S094TM is a shank milling cutter engineered for use with LNMX 1004 indexable inserts, offering coolant‑fed chip evacuation and a compact, rigid design for general machining operations. 25 mm shank diameter for stable clamping Internal coolant for efficient chip control Compatible with LNMX 1004 inserts by Korloy Secure clamping with Torx T15 screws M4x10 Boosted productivity through coolant‑fed cutting The combination of an internal coolant channel and a rigid 25 mm shank delivers measurable improvements in process stability and tool life. By supplying coolant directly to the cutting zone, the tool reduces thermal load on the insert and promotes chip evacuation, which supports longer uninterrupted cutting cycles and fewer insert changes. This design suits medium‑duty milling operations where consistent surface finish and repeatable dimensions are required; the result is increased throughput with lower overall tooling costs. Secure clamping and simple maintenance for reduced downtime Engineered for dependable clamping, the cutter uses Torx T15 drive screws (M4x10) to fix the insert seats, enabling fast, repeatable indexation. The three cutting edges provide balanced engagement and smooth cutting forces, while the 80 mm cutting length gives a practical reach for shoulder and face milling tasks. Maintenance is straightforward: replace or index the LNMX 1004 inserts and retorque the Torx screws to restore original cutting performance, reducing non‑productive time and tooling overhead. Application confidence and compatibility with Korloy inserts Designed around the LNMX 1004 insert geometry and compatible with Korloy manufacture, this milling head ensures a reliable fit and predictable cutting behaviour. The modular approach of using indexable inserts allows quick adaptation to differing materials or surface‑quality targets by selecting the appropriate grade. Combined with a 200 mm overall length and a compact 25 mm shank, the assembly balances reach and rigidity for stable machining across a range of common workshop tasks. Why the technical details matter for procurement and shop floor results Specifying a tool with documented features—internal coolant, standard Torx fixing, and proven insert compatibility—translates into fewer interfaces to manage, simplified stock lists and more predictable machining outcomes. For purchasing and planning, the S094TM offers a pragmatic balance of serviceability and performance: short changeover procedures, established insert formats and a compact form factor reduce risk in production planning and inventory management. Contact Metav Werkzeuge to discuss the S094TM with internal coolant and LNMX 1004 compatibility, or request application advice from our specialists for a tailored machining strategy. Technical data Article number: S094TM Manufacturer: Teknik Makina Product type: Indexable insert milling cutter Dimensions & measurable data Shank diameter: 25 mm Overall length: 200 mm Cutting length (shank to cutting area): 80 mm Weight: 0.6 kg Number of cutting edges: 3 Materials & special features Internal coolant: yes Suitable insert geometry: LNMX 1004 Compatible insert supplier: Korloy Torx key: T15 Torx screw: M4x10 FAQ What insert type does this milling cutter use? The milling cutter accepts LNMX 1004 indexable inserts; the tool body S094TM is designed to clamp that geometry securely. Is internal coolant available and how does it help? Yes, the S094TM features internal coolant to cool the cutting zone and improve chip evacuation, which extends insert life and enhances surface finish. What shank size is required for the holder? This cutter has a 25 mm shank diameter and is best used in holders compliant with that shank size for optimal rigidity. How many cutting edges does the tool provide? The cutter is configured with three cutting edges, offering balanced cutting forces and efficient material removal for face and shoulder milling. Which screw type is used for insert clamping? Insert clamping uses Torx T15 drive screws in M4x10 size for secure and repeatable fixation. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining the rigidity of a 25 mm shank, internal coolant and compatibility with LNMX 1006 inserts, this shank cutter ensures stable chip control and consistent machining results; order the tool directly via Metav Werkzeuge or consult our technical team for application-specific advice. Schaftfräser – Shank cutter for LNMX 1006 indexable inserts, 25 mm shank, internal coolant (Teknik Makina) Schaftfräser designed as an indexable-insert shank cutter for medium-duty milling operations, offering internal coolant and a compact 120 mm overall length for use in confined toolholders. Internal coolant for efficient tool cooling 25 mm shank for rigid clamping Compatible with LNMX 1006 Korloy inserts Three cutting edges for stable material removal Increased stability through a compact, rigid design The tool's 25 mm shank and balanced geometry deliver high rigidity at the spindle, reducing deflection during interrupted cuts and improving dimensional consistency. With a 120 mm total length and a 40 mm cutting length, the cutter provides a pragmatic combination of reach and stiffness for confined setups. This design reduces vibration and supports repeatable surface finishes, translating technical specifications into measurable production benefits such as reduced scrap rates and simplified process setup. Improved cooling and chip evacuation for longer cutting intervals Equipped with internal coolant, the cutter directs cutting fluid close to the cutting zone, which aids lubrication, reduces heat build-up and helps evacuate chips efficiently. The insert system accepts LNMX 1006 indexable inserts from Korloy, allowing the use of latest grades and geometries for different materials. The tool features three cutting edges, which balance cutting forces and improve feed smoothness; combined with secure fastening via T8 Torx and an M3x7 screw, this provides consistent insert clamping and straightforward replacement during scheduled maintenance. Serviceability and predictable performance for production workflows Designed for pragmatic workshop routines, the shank cutter simplifies insert changes and inspection, supporting predictable cycle times. The item is identified as LN102-1TM for ordering and inventory control and has a mass of 0.453 kg, which contributes to stable dynamic behaviour in many spindle configurations. The combination of indexable-insert flexibility and coolant-fed tool-body ensures operators can adapt cutting strategies while maintaining tool life and process stability — a rational investment for CNC centres seeking dependable output and lower per-part costs. Contact Metav Werkzeuge for an expert recommendation on applying this Teknik Makina shank cutter in specific workflows and to arrange fast delivery from our Emmerich warehouse Technical data SKU: LN102-1TM Product type: Shank cutter (indexable inserts) Manufacturer: Teknik Makina ECLASS: 21180806 Facts Shank diameter: 25 mm Total length: 120 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.453 kg Features Internal coolant: yes Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Fastening: T8 Torx with M3x7 screw Label: 25mm shank cutter LNMX 1006 L120mm with internal coolant FAQ Is this cutter compatible with Korloy LNMX 1006 inserts? Yes. The cutter is specified for LNMX 1006 indexable inserts and is compatible with Korloy insert geometries as stated in the product data. What Torx key and screw are required for insert replacement? Insert fastening on this shank cutter requires a T8 Torx key and M3x7 screw, enabling secure and repeatable clamping. What are the tool dimensions and how do they affect stiffness? The tool has a 25 mm shank, 120 mm total length and 40 mm cutting length; these dimensions provide a balanced compromise between reach and rigidity suitable for many medium-duty milling tasks. Can this cutter improve cycle times compared with solid-end mills? By using indexable inserts and targeted coolant delivery, the cutter can increase cutting intervals and reduce downtime for tool changes, which contributes to more efficient cycle times in production environments. Is the item listed for straightforward procurement and inventory control? Yes. The cutter is supplied as LN102-1TM, which simplifies ordering and stock management for workshop procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 25 mm shank rigidity, a 40 mm cutting length and compatibility with LNMX 1006 indexable inserts for reliable, repeatable milling cycles; order or request technical advice via Metav Werkzeuge for seamless integration. Teknik Makina Shaft cutter LN102TM — for LNMX indexable inserts, 25 mm shank The Shaft cutter LN102TM is a tool for indexable-insert milling, designed for secure clamping and efficient material removal in professional workshop and production environments. 25 mm shank diameter for rigid clamping 40 mm cutting length for deeper engagement Compatible with LNMX 1006 indexable inserts Includes M3x7 Torx screw and T8 key Precision and secure insert clamping for consistent component quality The LN102TM is built around a 25 mm shank and a 90° cutting angle, offering stable support in the spindle and predictable cutting forces. Compatibility with LNMX 1006 indexable inserts enables quick insert changes and consistent edge geometry without regrinding, which reduces setup time and maintains dimensional accuracy across batches. The tool is supplied with an M3x7 Torx screw and T8 key, ensuring the insert is secured to specification; this arrangement supports repeatable clamping torque and reduces the risk of insert movement during interrupted cuts. Such design choices are intended to deliver consistent surface finish and repeatable cycle times in series production. Improved material evacuation and access for demanding operations With three cutting edges and a 40 mm cutting length, this cutter balances chip evacuation and cutting stability. The flute count and geometry are selected to aid chip flow while preserving tool strength, making the tool suitable for heavier feed rates where rigid clamping is present. The 120 mm overall length provides additional reach for operations where access is constrained, while the relatively light mass of 0.453 kg contributes to lower spindle load during acceleration and reduces inertial forces on the toolholder. Where short tool-change times are required, the indexable system minimises downtime, increasing uptime and machining throughput. Practical fit for production workshops and insert systems Specified for use with Korloy-manufactured inserts and described as compatible with LNMX 1006 plates, this cutter is intended for professionals who value straightforward integration into existing insert programmes. The combination of standardised insert format and Torx clamping simplifies inventory management: spare screws and keys are common items in maintenance kits. The cutter’s construction supports reliable tool life under stable cutting conditions; routine checks of screw torque and insert condition are recommended to maintain peak performance and avoid unexpected tool-related interruptions. Contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich — technical consultants can confirm suitability for specific machining tasks and arrange delivery of the LN102TM with the necessary accessory parts Technical Data SKU: LN102TM Manufacturer: Teknik Makina Product type: Shaft cutter for LNMX indexable inserts Compatibility: LNMX 1006 Supplied fixing: M3x7 Torx screw, T8 key Facts Shank diameter: 25 mm Cutting length: 40 mm Total length: 120 mm Diameter: 25 mm Number of cutting edges: 3 Weight: 0.453 kg Cutting angle: 90° Special features Suitable for Korloy indexable inserts Indexable-insert system (LNMX 1006) Torx clamping hardware included Brand: Teknik Makina FAQ What insert type is required for this cutter? The cutter accepts LNMX 1006 indexable inserts; compatibility with Korloy inserts is specified for the LN102TM. How is the insert secured to the cutter head? An M3x7 Torx screw fastens the insert; the tool is supplied with a T8 key for correct tightening. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter and 120 mm overall length to ensure correct fit and sufficient reach in the toolholder. Is the cutter suitable for use in production with frequent insert changes? Yes — the indexable design and standardised clamping make the tool appropriate for production environments requiring fast insert replacement and consistent repeatability. What benefit does the 40 mm cutting length provide? The 40 mm cutting length increases axial engagement for deeper cuts or step milling operations while maintaining rigidity when used with suitable holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust machining performance with a 25 mm shank, integrated internal coolant and compatibility with R390 11T3 indexable inserts for efficient tool changes and extended insert life — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shank milling cutter S592-2TM — 25 mm shank, internal coolant (for R390 11T3 indexable inserts) by Teknik Makina Shank milling cutter S592-2TM designed for medium-duty milling operations where coolant-through capability and reliable insert clamping reduce downtime and support consistent surface quality 25 mm shank for high rigidity Internal coolant through body Compatible with R390 11T3 inserts Secure Torx clamping M2.5x7 Faster chip evacuation and longer insert life The combination of internal coolant and a compact cutting zone helps to evacuate chips effectively and control cutting temperatures. Coolant supplied through the tool body reaches the insert pocket directly, reducing thermal loading at the cutting edge and promoting longer insert life. For production environments this translates into fewer indexings per shift and a steadier process window, supporting predictable cycle times and lower tooling costs. Increased stability for improved surface quality A straight 25 mm shank and a 120 mm overall length create a balanced tool geometry that reduces vibration under moderate overhangs. The 45 mm cutting length focuses the cutting action where it is needed, improving stability during shoulder and slot milling tasks. This structural rigidity contributes to consistent part finish and dimensional accuracy, which is especially relevant when repeatability is required across multiple workpieces. Secure clamping and quick insert replacement The cutter accepts R390 11T3 indexable inserts and uses a M2.5x7 Torx screw with a T8 key for secure retention. The proven clamping geometry ensures repeatable seat positioning and safe torque values, while indexable inserts allow rapid edge changes without full tool replacement. These characteristics reduce non-productive time and simplify tool management in busy workshops that rely on predictable maintenance intervals. Practical fit for modular machining systems With its standard interface and compatibility with widely used insert types from Sandvik, this shank milling cutter integrates easily into established tooling systems. The tool’s net weight and compact proportions facilitate handling and tool change operations at the machine, while the internal coolant option supports applications where flushing the cut zone is a priority. The result is a pragmatic tool choice for operations that value uptime and straightforward logistics. Contact Metav Werkzeuge for specification matching and procurement of this Teknik Cutting Tools shank milling cutter S592-2TM; our specialists in Emmerich advise on setup, clamping and insert choice to ensure optimal results Technical data Article number: S592-2TM Type: Shank milling cutter Brand: Teknik Makina Compatible inserts: R390 11T3 (Sandvik) Internal coolant: Yes Torx screw: M2.5x7 Torx key: T8 Core specifications Diameter: 25 mm Shank diameter: 25 mm Overall length: 120 mm Cutting length (shank): 45 mm Number of cutting edges: 3 Weight: 0.446 kg Features Indexable insert system Coolant-through tool body Secure Torx clamping Suitable for modular toolholders FAQ Is this cutter compatible with Sandvik inserts? The S592-2TM accepts R390 11T3 indexable inserts, which are available from Sandvik and match the cutter’s pocket geometry. Does the tool provide through-coolant capability? Yes, the cutter features internal coolant through the body, delivering coolant directly to the insert seat. What is the required Torx key and screw for insert clamping? Insert clamping uses a M2.5x7 Torx screw tightened with a T8 key for secure and repeatable retention. What are the main dimensions to consider for tool setup? Key setup values: 25 mm diameter, 120 mm overall length, and 45 mm cutting length — useful for determining overhang and holder compatibility. How many cutting edges does the cutter have? The cutter is configured with 3 cutting edges, which balances material removal rate and insert economy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of fast set-up and stable cutting performance thanks to the combination of a 25 mm shank, compatibility with R390‑11T3 indexable inserts and a robust three‑edge geometry; order directly via Metav Werkzeuge or consult our specialists for application advice. Insert milling cutter S597TM by Teknik Makina — 25 mm shank, for R390‑11T3 indexable inserts The insert milling cutter S597TM is designed to accept R390‑11T3 indexable inserts and to deliver reliable face and peripheral milling performance in industrial CNC environments. 25 mm shank diameter For R390‑11T3 indexable inserts Three cutting edges for stable machining 90° cutting angle for square shoulder milling Precision compatibility reduces set‑up time and errors The S597TM insert milling cutter is engineered around a standard R390‑11T3 pocket, which means quick, repeatable insert seating and minimal set‑up complexity. The 25 mm shank fits common tool holders, while the secure Torx M2.5x7 clamping screw (Torx key T8) ensures positive insert retention. By standardising on widely available indexable inserts, tool changeover becomes faster and spares management simpler, helping production planners reduce downtime and maintain process stability. Stable cutting geometry for consistent surface quality With three cutting edges and a 90° cutting angle, the tool offers good load distribution across the insert radius, which stabilises cutting forces during face milling and square‑shoulder operations. The 50 mm cutting length and 200 mm overall length balance reach and rigidity, enabling reliable material removal while limiting vibration. For machinists, this translates into repeatable part geometry and fewer secondary operations to correct surface finish or dimensional variance. Practical handling and serviceability for the workshop The tool body is supplied ready for insert installation using the specified Torx M2.5x7 screw and T8 key, simplifying maintenance routines on the shop floor. The standardised insert interface and common screw type mean cutters can be serviced with minimal special tooling, reducing the need for bespoke spare parts. The clear mechanical design supports quick inspection and predictable reassembly, which is valuable for production teams aiming for deterministic changeover times. Suited workflows and typical applications Designed as an indexable insert milling cutter, the component is primarily intended for use in milling centres and CNC machining operations where modular tooling and fast insert replacement are priorities. Its geometry favours face milling and shoulder work where a square cut is required. Compatibility with Sandvik R390‑11T3 inserts provides access to a wide range of grades and chipbreakers, enabling selection for specific workpiece materials and cutting conditions while keeping tool stock consolidated. Consult Metav Werkzeuge for tailored selection, availability and application guidance on the Teknik Makina S597TM insert milling cutter; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S597TM Brand: Teknik Makina Designation: Insert milling cutter for R390‑11T3 indexable inserts Torx screw: M2.5x7 Torx key: T8 Facts Shank diameter: 25 mm Cutting length: 50 mm Overall length: 200 mm Diameter: 25 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.762 kg Special features Compatible inserts: R390‑11T3 Compatible insert manufacturer: Sandvik Suitable for modular indexable tooling systems Secure Torx clamping for quick insert changes FAQ Which inserts fit this cutter? The S597TM insert milling cutter is designed for R390‑11T3 indexable inserts; Sandvik R390‑11T3 grades are directly compatible. What shank diameter is required for tool holders? The tool has a 25 mm shank and is intended for holders that accept a 25 mm diameter shank. How many cutting edges does the tool have and what is the cutting angle? The cutter features three cutting edges and a 90° cutting angle, optimised for square‑shoulder and face milling. Which fastening parts are supplied for insert clamping? Insert retention uses a Torx M2.5x7 screw; the specified key is a T8 Torx. What is the overall length and cutting length of the tool? The tool measures 200 mm overall length with a 50 mm cutting length, balancing reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a durable milling solution that combines Sandvik R390-11T3 insert compatibility, a 25 mm shank and a generous 60 mm cutting length for stable, repeatable shoulder and face milling. Benefit from a three‑edge geometry that improves surface finish while maintaining efficient material removal—order directly via Metav Werkzeuge or consult our specialists for application advice. Shaft cutter S598TM – Indexable-insert milling arbor with 25 mm shank and 60 mm cutting length by Teknik Makina Shaft cutter S598TM for reliable milling with R390-11T3 indexable inserts, designed for heavy-duty shoulder and face operations in production environments Compatible with R390-11T3 Sandvik indexable inserts 25 mm shank for standard toolholders Three cutting edges for smooth material removal 60 mm cutting length for deep shoulder milling Consistent accuracy through proven insert compatibility The shaft-mounted cutter is engineered for repeatable performance when used with R390-11T3 indexable inserts. The combination of a 25 mm shank and a solid arbor design delivers reduced vibration and stable cutting forces, which directly benefits process reliability and component quality. The tool’s three cutting edges support balanced load distribution, translating into a finer surface finish and longer insert life compared with single-edge alternatives. Where tool change frequency and scrap reduction matter, this configuration offers a measurable productivity advantage. Faster set-ups and secure clamping reduce downtime A short changeover time is enabled by the straightforward clamping concept: inserts are secured with a Torx M2.5x7 screw tightened with a T8 key, ensuring quick and secure replacement. The 90° cutting angle presents a familiar geometry for standard shoulder milling, making machining parameters easier to transfer between setups. This pragmatic design reduces non-productive time and simplifies operator training, supporting lean production goals without complex intervention. Robust design for demanding milling tasks Engineered as a milling arbor for indexable-insert applications, this tool supports a range of face and shoulder operations where a solid shank and extended cutting length are required. The 60 mm cutting length provides capability for deeper shoulders while the overall length and 25 mm diameter maintain compatibility with common toolposts and holders. Compatibility with Sandvik inserts means access to a broad portfolio of grades and chipbreakers for varied materials, enabling informed selection for productivity or finish-focused strategies. Serviceability and inventory advantages Maintenance is straightforward: replacement inserts and the Torx M2.5x7 fastening allow rapid field service without special equipment beyond the specified T8 key. The arbor’s weight of 0.951 kg makes handling predictable during tool changes and stocking. For workshops consolidating tooling ranges, this arbor reduces the complexity of spare parts and insert types when paired with the widely available R390-11T3 family. Clear identification by SKU S598TM aids inventory management and reordering. For application advice tailored to the S598TM and to secure prompt delivery from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance and reliable supply. Technical data Article number: S598TM Manufacturer: Teknik Makina Brand: Teknik Makina Material / execution: Shaft-mounted milling arbor Core specifications Shaft diameter: 25 mm Cutting length: 60 mm Overall length: 250 mm Cutting edges: 3 Diameter: 25 mm Weight: 0.951 kg Cutting angle: 90° Features & compatibility For R390-11T3 indexable inserts Compatible with Sandvik insert family Torx screw M2.5x7 for insert clamping Torx key size T8 for assembly/disassembly eCl@ss: 21180806 ETIM: EC011860 FAQ What inserts are compatible with this cutter? The shaft cutter S598TM is designed for R390-11T3 indexable inserts and is compatible with the Sandvik range of R390‑series inserts. What shank diameter is required for mounting? The tool has a 25 mm shank, so a matching collet or toolholder with a 25 mm bore is required for secure mounting. How many cutting edges does the arbor provide? This milling arbor features three cutting edges, offering balanced cutting action and improved surface finish for shoulder milling. Which screw and key are used for securing the inserts? Inserts are fastened with a Torx M2.5x7 screw; the specified tightening key is T8. Is the cutter suitable for deep shoulder milling? Yes. The 60 mm cutting length makes this arbor well suited to deeper shoulder and face milling operations within its shank and holder limits. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 25 mm shank, a 60 mm effective cutting length and compatibility with R390‑1806 indexable inserts to ensure stable, repeatable milling cycles; order the S600TM via Metav Werkzeuge or consult our specialists for application support. S600TM shaft cutter for R390‑1806 indexable inserts by Teknik Makina — 25 mm shank, 60 mm cutting length S600TM is a shaft cutter engineered for indexable‑insert milling with R390‑1806 inserts, designed for reliable face milling and slotting in production and workshop environments 25 mm shank diameter 60 mm effective cutting length Compatible with R390‑1806 inserts Secured with M4x11 Torx screw (T15) Proven milling performance for consistent cycle times The cutter is built to deliver stable machining through its 25 mm shank and firm clamping design, reducing runout and vibration during operations. The combination of a robust shank and a balanced 200 mm overall length provides predictable tool behaviour, which translates into repeatable part quality and fewer cycle interruptions. With a 90° cutting angle and two cutting edges, the tool is optimised for efficient material removal where planar faces and slots are required; this means shorter machining cycles and less time spent on secondary finishing. Clear compatibility and straightforward setup Compatibility with R390‑1806 indexable inserts (Sandvik format) simplifies tooling selection and supply chain logistics. The cutter is fastened using an M4x11 Torx screw and requires a T15 Torx key for secure insert clamping, enabling quick insert changes and minimal downtime. For technicians new to indexable‑insert systems: an indexable cutter holds replaceable carbide inserts in a seat, so worn cutting edges are renewed by replacing the insert rather than the whole cutter — a cost‑effective approach for high‑volume production. Operational advantages that reduce process risk A 60 mm cutting length gives a practical reach for many face milling and slotting tasks without compromising stiffness; combined with a nominal diameter of 25 mm and a net weight of 0.756 kg, the tool balances rigidity with manageable handling. These attributes support safer, more stable cutting conditions that extend insert life and reduce scrap rates. The straightforward geometry and proven insert standard also aid inventory management, since familiar R390‑1806 inserts from Sandvik are widely available and easy to stock. Support, sourcing and workshop integration Sourcing from a reliable supply partner reduces procurement complexity. Metav Werkzeuge’s Emmerich site acts as a quality filter for the European market, offering a broad portfolio and dependable logistics. For operational planning, note the cutter’s measured parameters — shank diameter, cutting length, overall length and fastening type — when specifying holders or checking machine‑spindle compatibility. For bespoke advice on fixturing, balancing or recommended cutting parameters, Metav’s consultancy provides quick technical guidance tailored to production requirements. Contact Metav Werkzeuge for tailored advice on the S600TM and to arrange supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S600TM Manufacturer: Teknik Makina Product name: Schaftfräser (shaft cutter) for R390‑1806 indexable inserts Facts Shank diameter: 25 mm Effective cutting length: 60 mm Diameter: 25 mm Number of cutting edges: 2 Overall length: 200 mm Cutting angle: 90° Fastening screw: M4x11 Torx Torx key: T15 Weight: 0.756 kg Special features Compatible with R390‑1806 indexable inserts Suitable insert manufacturer: Sandvik Secured by M4x11 Torx screw (T15) Two cutting edges for efficient material removal Designed for face milling and slotting applications FAQ What inserts are required for this cutter? The S600TM accepts R390‑1806 indexable inserts; Sandvik‑specification inserts are compatible. Which toolholding size is required for safe mounting? Use a holder that accepts a 25 mm shank diameter and provides proper axial and radial clamping for the 200 mm overall length. How is the insert fixed and changed? Inserts are clamped with an M4x11 Torx screw; a T15 Torx key is used for insertion and removal. Is the cutter suitable for deep slotting operations? The 60 mm effective cutting length offers reach for many slotting tasks, but application limits depend on machine rigidity and cutting parameters. How does the cutter contribute to operational efficiency? Replaceable inserts reduce tool replacement time and cost, while the solid shank and balanced geometry promote consistent part quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine robust compatibility with RPMT 0803 inserts, internal coolant delivery and a long 250 mm body to ensure consistent chip evacuation and reduced downtime; order or request advice through Metav Werkzeuge for a tailored supply solution. R314TM — 25 mm shank milling cutter for RPMT 0803 indexable inserts by Teknik Makina The R314TM is a precision-engineered indexable milling cutter, designed for heavy-duty face and slot milling using RPMT 0803 inserts and delivering coolant directly to the cutting zone. Internal coolant for improved tool life Compatible with RPMT 0803 inserts by Korloy 25 mm shank, 250 mm overall length Minimise downtime with targeted coolant and reliable chip control The core benefit of an integrated coolant channel is consistent cooling and efficient chip evacuation. The built-in internal coolant directs lubricant and coolant precisely to the insert pockets, which reduces thermal load and helps prevent edge build-up during prolonged cuts. This targeted supply improves wear behaviour and contributes to longer service intervals for the holder and the inserts. For production environments where process stability is essential, this results in fewer tool changes and a more predictable machining cycle. Sturdy design for repeatable, high-accuracy milling A robust 25 mm shank and a total length of 250 mm provide a balance between reach and rigidity, enabling stable milling in both slotting and light shoulder operations. The tool features 4 cutting edges, allowing balanced material removal and smoother engagement with the workpiece. The cutter head accepts standard RPMT 0803 indexable inserts, making replacement straightforward and cost-effective; insert clamping uses an M3x7 Torx screw with a T8 key for secure seating and easy service. This mechanical setup ensures consistent seat location and repeatability across insert changes. System compatibility and straightforward maintenance for shop use Compatibility with Korloy RPMT 0803 inserts broadens the selection of grades and chipform options, simplifying tool inventory management. The body is purpose-built to accept conventional triangular inserts and fasten them reliably, while the internal coolant passage promotes cleaner chip flow and reduced heat at the cutting edge. Routine maintenance consists of replacing worn inserts and checking the Torx mounting screw; the standardised fastener format and accessible design speed up service operations and lower total processing cost over time. Request a technical consultation or a tailored quotation from Metav Werkzeuge for the Teknik Makina R314TM shank milling cutter with internal coolant; Metav Werkzeuge can advise on insert grades, hold stock and supply directly from Emmerich Technical Data Article number: R314TM Manufacturer: Teknik Makina Product type: Indexable shank milling cutter Facts Diameter: 25 mm Overall length: 250 mm Cutting length: 40 mm Number of cutting edges: 4 Shank diameter: 25 mm SKU: R314TM Special features Internal coolant For RPMT 0803 indexable inserts Compatible with Korloy inserts Torx screw M3x7 Torx key T8 FAQ What insert type does this cutter accept? The cutter accepts RPMT 0803 indexable inserts; the body is machined to seat these inserts accurately for repeatable performance. Is there coolant delivery through the tool? Yes, the holder features internal coolant that supplies fluid directly to the insert pockets to improve chip evacuation and edge life. Which insert manufacturers are compatible? The tool is compatible with Korloy RPMT 0803 inserts, widening available grades and chip control options. What fastening hardware is used for the inserts? Inserts are secured with an M3x7 Torx screw; the required Torx key is T8, ensuring a secure and serviceable clamping method. How does the 25 mm shank affect machining stability? A 25 mm shank offers a stable connection to the toolholder, balancing rigidity and accessibility for many shop applications and reducing vibration for improved surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Specifications: Order Number: S595TM Item: End Mill usable with R390-11T3 Indexable Inserts of Sandvik Brand: Teknik Makina Quantitative Characteristics: Diameter: 25mm Cutting Edges: 3 Weight: 0.557kg Total length: 150mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the robust combination of secure Torx clamping, long cutting length and precise 25 mm shank for consistent machining results; order directly via Metav Werkzeuge or contact our consultants for integration advice. Shank milling cutter S828TM — 25 mm shank, for SPMG 0502–0904 indexable inserts (Teknik Makina) The Shank milling cutter S828TM is a compact, indexable-insert milling body engineered for stable milling operations with SPMG 0502–0904 inserts, designed to fit standard toolholders and deliver dependable performance in series production. Solid 25 mm shank diameter 50 mm cutting length for deep cuts Compatible with SPMG 0904 indexable inserts Secure Torx clamping with M3.5x8.5 screw Enhanced rigidity and runout control for reliable milling This milling body features a 25 mm shank and a 150 mm overall length, providing a solid connection to the machine spindle and reduced deflection under load. The combination of a sturdy shank and compact geometry supports consistent tool life and repeatable machining accuracy, which is essential for production runs where stability matters. The modest mass (approx. 0.567 kg) contributes to predictable dynamic behaviour and easier balancing in multi-tool setups. High material removal with controlled chip handling With a 50 mm cutting length and 2 cutting edges, the design balances efficient material removal and controlled chip flow. The indexable-insert concept allows for rapid insert changes and predictable cost-per-edge, improving machine uptime. The tool body accepts the common SPMG 0904 insert format, enabling straightforward integration into existing insert inventories and reducing tooling complexity on the shop floor. Secure clamping and quick maintenance procedures Clamping is achieved with a Torx clamping screw M3.5x8.5 and requires a T15 key, which ensures firm insert retention during heavy cuts while allowing swift replacement when required. The Torx interface reduces the risk of cam-out and provides consistent clamp torque with standard workshop tools. The insert seat geometry is designed for repeatable positioning so that index changes restore cutting geometry without additional set-up time. Compatibility and process integration for production environments The tool body is specified for use with Taegutec-manufactured indexable inserts and matches common industrial setups expecting SPMG 0502–0904 insert sizes. Its straightforward mechanical interface makes it suitable as a replacement or upgrade in existing tool sets, aiding standardisation across the tool crib. The result is a tool that supports lean tooling management and predictable production output. For procurement and technical advice on integrating the S828TM shank milling cutter into existing machining processes, contact Metav Werkzeuge for local supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support and delivery options. Technical data Article number: S828TM Manufacturer: Teknik Makina Product type: Shank milling cutter Core dimensions Shank diameter: 25 mm Cutting length: 50 mm Diameter: 25 mm Number of cutting edges: 2 Overall length: 150 mm Weight: 0.567 kg Features Compatible with SPMG 0904 indexable inserts For SPMG 0502–0904 indexable inserts Torx clamping screw M3.5x8.5 Torx key size T15 Suitable for Taegutec inserts FAQ Which insert sizes fit this milling body? The S828TM accepts SPMG 0502–0904 indexable inserts and is specified to work with SPMG 0904 sizes as listed. What clamping hardware is required for insert changes? Insert retention uses a Torx clamping screw M3.5x8.5; a T15 Torx key is required for secure tightening and removal. How many cutting edges does the tool have? The tool body is configured for 2 cutting edges, enabling straightforward chip control and efficient material removal. What are the main dimensions to consider when fitting into a toolholder? Key dimensions are a 25 mm shank diameter, 150 mm overall length and a 50 mm cutting length; these determine holder compatibility and projection. Is the tool compatible with Taegutec inserts? Yes, the milling body is noted as suitable for Taegutec-manufactured indexable inserts in the SPMG family. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precision insert compatibility, robust shank stability and integrated internal coolant for consistent machining cycles; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank Milling Cutter for TNKT 1105 Indexable Inserts — 25 mm, internal coolant (Teknik Makina) The Shank Milling Cutter for TNKT 1105 Indexable Inserts is an indexable-insert milling tool designed for efficient face and slot milling in CNC operations, offering internal coolant and a rigid shank for stable cutting performance. 25 mm cutter diameter Internal coolant for reliable cooling Compatible with TNKT 1105 Korloy inserts 23 mm shank, 120 mm overall length Maximised cycle time and consistent chip control With a 25 mm cutting diameter and 3 cutting edges, this indexable-insert milling solution delivers predictable material removal rates while reducing tool-change frequency. The internal coolant channel feeds cooling fluid directly to the cutting zone, improving chip evacuation and reducing thermal loading on the insert seats. For production environments where throughput and repeatability matter, the combined effect of a compact cutter body and targeted cooling helps maintain surface finish and dimensional stability across long runs. Secure clamping and simplified insert changes The tool features a precise interface and a 23 mm shank that provides stiffness in the holder, minimising vibration during interrupted cuts. Insert retention uses a Torx fixation (Torx key T8) with M3x7 screws, enabling fast and reliable insert replacement with standard workshop tooling. This arrangement reduces downtime for maintenance and keeps set-up times predictable, which supports higher machine availability and streamlined tool management in busy shops. Broad indexable-insert system compatibility Designed for the widely used TNKT 1105 insert family and compatible with Korloy inserts, the cutter permits flexible grade selection and cost-effective insert rotation strategies. Using an indexable system allows the separation of cutting geometry from the body, so the cutter body remains in service while inserts are replaced as they wear. This approach is economically efficient for mixed production, where different grades and coatings can be chosen to match specific workpiece materials without changing the holder. Practical workshop benefits and assurance of supply Weighing 0.372 kg and measuring 120 mm in overall length with a 35 mm cutting length on the shank, the cutter balances accessibility in tight setups with sufficient reach for common milling tasks. The design supports routine maintenance and inventory control: a compact SKU strategy using the S056TM identifier simplifies reordering. Metav’s Emmerich hub acts as a quality filter for the European market, ensuring steady availability and technical support to keep production moving. Contact Metav Werkzeuge for an application review and parts allocation; our consultants will advise on insert grades and machine parameters to suit specific milling tasks. Technical data Article number: S056TM Product type: Shank milling cutter Manufacturer: Teknik Makina Internal coolant: yes Facts Cutter diameter: 25 mm Overall length: 120 mm Shank diameter: 23 mm Cutting length (shank): 35 mm Number of cutting edges: 3 Weight: 0.372 kg Torque key: T8 Screw: M3x7 Special features Compatible with TNKT 1105 indexable inserts Suitable for Korloy TNKT 1105 inserts Indexable-insert system Label: 25mm Shank Cutter TNKT 1105 L120mm with internal coolant FAQ Which inserts fit this cutter? The cutter accepts TNKT 1105 indexable inserts; Korloy TNKT 1105 grades are compatible and commonly used with this cutter to match material and cutting conditions. How is coolant supplied to the cutting zone? Coolant is fed through the body via the integrated internal coolant channel, delivering fluid directly to the insert zone for improved chip control and tool life. What fastening hardware is required for insert changes? Insert retention uses M3x7 Torx screws operated with a T8 Torx key, allowing rapid and secure insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable performance with efficient chip evacuation and secure clamping makes this cutter a practical choice for modern milling tasks; the internal coolant and 25 mm shank combine to reduce downtime and extend insert life. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Indexable shank milling cutter S400TM — 25 mm shank, internal coolant (Teknik Makina) The Indexable shank milling cutter S400TM is a purpose-built tool for precision milling with VDKT 11T2 indexable inserts, offering secure shank fixation and directed coolant for production and workshop environments. 25 mm shank for rigid clamping Internal coolant for improved chip evacuation Compatible with VDKT 11T2 Korloy inserts Three cutting edges for smooth material removal Stable clamping and reduced vibration for consistent surface quality The solid 25 mm shank and compact overall geometry deliver high stiffness at the toolholder, which translates into reduced chatter and more consistent surface finishes during heavy or interrupted cuts. With three cutting edges, the design balances material removal rate and vibration damping so that cycle times remain competitive while maintaining target tolerances. This structural stability benefits both single-shift workshops and continuous production lines by lowering scrap rates and reducing rework. Directed coolant flow for longer insert life and cleaner chips The integrated internal coolant channels supply cutting fluid close to the cutting zone, improving cooling and lubrication where it matters most. As a result, chip evacuation is more efficient and thermal load on the cutting edges is reduced, which helps preserve insert geometry and extend service intervals. When combined with VDKT 11T2 indexable inserts from Korloy, the coolant-assisted setup supports stable tool life and predictable tool-change planning, contributing to a lower cost per component over longer production runs. Fast, secure insert fastening for minimal downtime Insert retention is handled with a Torx T8 interface and M2.5x5.5 screw, enabling quick and reliable insert changes with standard workshop tools. The simple fastening system reduces changeover time and minimises the risk of incorrect torque application, protecting insert seats and preserving repeatability. The tool’s practical design supports efficient maintenance routines and clear spare-part handling in busy production settings. Compact reach with practical cutting length for common milling tasks With an overall length of 115 mm and a cutting length of 35 mm, the tool offers a useful combination of reach and rigidity for slotting, facing and light shoulder milling operations that use indexable cutting edges. The compact proportions help keep overhang low, improving stability in deeper pockets or when working close to fixtures. The cutter’s balanced specification makes it an adaptable choice for a wide range of indexable-insert milling applications without unnecessary complexity. Choose Teknik Makina’s S400TM when internal coolant and rigid shank performance are priorities; contact Metav Werkzeuge in Emmerich for tailored supply options and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S400TM Manufacturer: Teknik Makina Product type: Shank milling cutter Insert type: VDKT 11T2 Compatible insert manufacturer: Korloy Facts Shank diameter: 25 mm Overall length: 115 mm Cutting length: 35 mm Number of cutting edges: 3 Weight: 0.392 kg Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant Designed for indexable insert milling Quick-change insert fastening SKU: S400TM FAQ Which inserts are suitable for this cutter? The S400TM is designed for VDKT 11T2 indexable inserts and is compatible with Korloy-manufactured VDKT 11T2 grades. Does the tool provide internal coolant supply? Yes — the cutter features internal coolant channels to direct fluid to the cutting zone for improved cooling and chip control. What are the key dimensions to consider for setup? Important dimensions are a 25 mm shank diameter, 115 mm overall length and 35 mm cutting length, which should be matched to the machine’s toolholder and reach requirements. How are the inserts secured? Inserts are fastened using a Torx T8 drive and M2.5x5.5 screw for secure, repeatable clamping and straightforward changeovers. Is the S400TM suitable for high-feed milling? The cutter’s rigid 25 mm shank and three-edge configuration support robust material removal rates within the operational limits of VDKT 11T2 inserts, making it suitable for many high-feed scenarios where insert selection and machining parameters are correctly matched. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of a 25 mm shank, internal coolant and compatibility with XEKT 1904 indexable inserts delivers consistent tool life and dependable chip control for industrial milling; order the tool directly via Metav Werkzeuge or consult the technical team for application advice. Shank milling cutter S386TM – 25 mm shank, internal coolant (Teknik Makina) A shank milling cutter S386TM designed for XEKT 1904 indexable inserts, offering internal coolant and a 200 mm overall length for reliable industrial milling applications 25 mm shank diameter Internal coolant for chip control Compatible with XEKT 1904 inserts Secure Torx clamping system Predictable productivity with durable cutting geometry The indexable milling body offers a stable platform for repeatable machining cycles, combining a 25 mm shank with a 200 mm overall length and a 61 mm cutting length that balance reach and stiffness. With two cutting edges, the design reduces unnecessary mass while maintaining effective chip evacuation; this results in consistent surface quality and predictable tool-change intervals. The tool body is engineered to accept XEKT 1904 inserts, which enables fast insert replacement and lowers per-cut costs without sacrificing repeatability. Controlled temperatures and secure insert clamping Internal coolant is routed directly to the cutting zone to support heat dissipation and chip removal; the internal coolant feed improves insert life by maintaining stable cutting temperatures and reducing edge wear. The clamping system uses a T15 Torx key and M4x8.5 Torx screw for positive retention, ensuring the insert seat remains secure under heavy machining loads. The combination of coolant delivery and robust fastening reduces the risk of built-up edge and enhances process reliability across continuous production runs. Compatibility that simplifies workshop logistics Designed for use with XEKT 1904 indexable inserts from Korloy, this milling body integrates into existing tooling families with minimal adjustment. The indexable design allows workshops to replace only the insert rather than the entire tool, supporting a lower lifetime cost of ownership and faster downtime recovery. At a weight of 0.627 kg the tool balances handling convenience with industrial robustness. For application-specific recommendations or to confirm geometry clearance in a particular machine set-up, Metav Werkzeuge’s technical advisors are available to assist. Contact Metav Werkzeuge in Emmerich for tailored application guidance or to request a supply proposal for the Teknik Cutting Tools S386TM indexable milling cutter with internal coolant. Technical data Article number: S386TM SKU: S386TM Product type: Indexable milling cutter ECLASS: 21180806 Dimensions & weight Diameter: 25 mm Overall length: 200 mm Cutting length (shank): 61 mm Shank diameter: 25 mm Weight: 0.627 kg Cutting edges: 2 Features & compatibility Internal coolant: yes Compatible inserts: XEKT 1904 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x8.5 Manufacturer (raw data): Teknik Makina Label: 25mm Shank milling cutter XEKT 1904 L200mm with internal coolant FAQ Which inserts fit the tool? The shank milling cutter S386TM is specified for XEKT 1904 indexable inserts and accepts inserts from Korloy as listed in the product data. Does the tool provide internal coolant? Yes, the S386TM features internal coolant routed to the cutting zone to aid chip evacuation and temperature control. What are the key dimensions to check for machine setup? Key dimensions are a 25 mm shank, 200 mm overall length and 61 mm cutting length, which are relevant when confirming holder clearance and reach. How is the insert secured? Insert retention on the S386TM is via a Torx screw system using a T15 key and M4x8.5 screw for secure clamping. How many cutting edges does the tool have? The milling body is supplied with 2 cutting edges, offering a balance between material removal rate and chip space. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak No:9, Selcuklu/KONYA, TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Optimise machining performance with the combination of a 25 mm shank, internal coolant and compatibility with XNKU 06T3 indexable inserts for reliable cycle times and extended tool life. Order directly via Metav Werkzeuge or consult our specialists for tailored tooling advice. 25 mm Shank Milling Cutter S780TM – Insert milling cutter with internal coolant by Teknik Makina The 25 mm Shank Milling Cutter S780TM is an indexable-insert milling cutter engineered for secure toolholding and efficient chip control in face and shoulder milling applications on CNC machines. 25 mm shank for stable toolholding Internal coolant for efficient cooling Compatible with XNKU 06T3 indexable inserts 60 mm cutting length with 4 cutting edges High-efficiency machining through indexable-insert design The combination of an indexable-insert system and central coolant supply allows a clear focus on machining efficiency and predictable tool life. Designed for XNKU 06T3 inserts, the cutter converts insert corner changes into quick interventions rather than lengthy regrinds, which reduces machine downtime and total tooling cost. The internal coolant channels coolant directly to the cutting zone, improving heat dissipation and aiding chip evacuation — a practical solution for longer uninterrupted cycles and consistent surface finish. Quick maintenance and proven compatibility for easy handling Maintenance routines are simplified by the standardised insert clamping and the use of a Torx drive. The cutter accepts the included Torx key specification T8 and secures inserts with an M2.5 x 5.5 screw, enabling fast, repeatable insert changes. Compatibility with Palbit-type inserts and the XNKU 06T3 geometry ensures broad availability of cutting grades and geometries for varied materials and batch sizes. The straightforward serviceability translates into lower handling times and predictable changeover procedures. Rigidity and stability for consistent results in demanding operations A 25 mm shank diameter combined with a total length of 110 mm yields a balance between reach and stiffness; the 60 mm cutting length with four cutting edges provides efficient metal removal while maintaining stability. At a weight of 0.344 kg the tool is light enough for dynamic spindle performance yet robust where rigidity matters. These characteristics reduce vibration, contribute to repeatable tolerances and help achieve superior surface quality in slotting, shoulder and face milling tasks on modern milling centres. For Teknik Makina quality backed by Metav Werkzeuge’s European distribution and tooling expertise, contact Metav Werkzeuge in Emmerich for individual advice, availability and order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S780TM Product type: Insert milling cutter Suitable for: XNKU 06T3 indexable inserts Compatible insert manufacturer: Palbit Core specifications Shank diameter: 25 mm Overall length: 110 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.344 kg Torx key: T8 Screw: M2.5 x 5.5 Special features Internal coolant For XNKU 06T3 indexable inserts Manufacturer: Teknik Makina FAQ Which inserts fit this cutter? The cutter is specified for XNKU 06T3 indexable inserts; grades and geometries from Palbit are compatible and recommended for broad machining applications. Is the tool suitable for heavy roughing? With a 25 mm shank, four cutting edges and a 60 mm cutting length, the cutter provides the rigidity and edge count appropriate for heavy roughing when used with suitable inserts and machining parameters. How does internal coolant improve performance? Internal coolant delivers coolant directly to the cutting zone, which reduces cutting temperature, improves chip removal and helps extend the life of the indexable inserts used with this tool. What tooling is required for insert changes? Insert clamping uses a Torx drive; the specified key is T8 and the insert screw is M2.5 x 5.5, enabling fast and repeatable insert replacement. Can the cutter be used on automatic toolchangers? The cutter’s 25 mm shank and standard mounting dimensions are compatible with typical CNC toolholders and automatic toolchang ers; check machine toolholder specifications for full compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Conflicting product data: the field "bezeichnung_2_en" specifies compatibility with XOMX 0602–1204 indexable inserts, while the field "fur_wendeplatten" lists XOMX 0903; these entries are inconsistent and require verification. This discrepancy could lead to confusion for users attempting to determine the correct inserts for their tools. It is essential to cross-check these details with the manufacturer or supplier to ensure accurate information is provided. Miscommunication in technical specifications can result in improper usage, reduced efficiency, or even damage to equipment, making it critical to address such inconsistencies promptly and effectively. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selçuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of sturdy 25 mm shank stability, compatibility with XOMX 0602–1204 indexable inserts, and a three‑edge cutting configuration for consistent metal removal and short set‑up times; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Shank cutter S643TM – indexable insert milling tool with 25 mm shank A shank cutter designed for indexable inserts, intended for milling operations using XOMX 0602–1204 plates and compatible with SECO insert systems. Compatible with XOMX 0602–1204 inserts Robust 25 mm shank for stable clamping Three cutting edges for steady chip removal Torx M3.5x8.5 clamping with T10 key Reliable rigidity and predictable cutting performance The tool is built around a 25 mm shank, offering high clamping security in modern toolholders and reduced run‑out during machining. With a three cutting edge arrangement and a 90° cutting angle, the design stabilises cutting forces and promotes even chip formation, which helps to maintain surface quality and extend insert life. The replaceable indexable inserts (XOMX 0602–1204) allow operators to restore cutting geometry quickly without regrinding, translating into measurable reductions in downtime and smoother production flow. Fast insert handling and secure fastening Clamping is achieved with a Torx M3.5x8.5 screw operated by a T10 key, enabling concise and repeatable insert changes. The tool’s total length 150 mm and cutting length 55 mm balance reach with stiffness; the overall mass (approx. 0.574 kg) contributes to steady cutting dynamics in standard milling set‑ups. The combination of simple screw access and standardised insert format supports quick maintenance cycles and predictable assembly procedures on the shop floor, making the cutter suitable for regular shift use where tool change speed matters. Application scope and insert‑led flexibility This shank cutter accepts XOMX 1204 size inserts and is listed as compatible with SECO plate formats; the actual cutting performance and material range are therefore determined by the chosen insert grade and geometry. Manufacturers can select carbide grades and coatings on the inserts to adapt the tool for finishing or more aggressive material removal. The tool’s indexable concept provides operational flexibility: a single holder covers multiple machining tasks simply by fitting the appropriate insert, which offers cost efficiency and simplified inventory management for workshops and production planners. Contact Metav Werkzeuge for availability and a tailored recommendation on Teknik Makina’s shank cutter S643TM; our specialists in Emmerich can advise on insert grades and clamping options to match each machining task. Technical data Article number: S643TM Manufacturer: Teknik Makina Product name: Schaftfräser (for XOMX 0602-1204 Indexable Inserts) Numeric data Shank diameter: 25 mm Tool diameter: 25 mm Cutting length (shank): 55 mm Total length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.574 kg Design features Torx screw: M3,5x8,5 Torx key size: T10 Compatible insert family: XOMX 1204 Compatible insert manufacturer: SECO FAQ Which insert sizes fit this shank cutter? The shank cutter S643TM is designed for XOMX 0602–1204 indexable inserts; XOMX 1204 plates are specified for direct fit. How is the insert secured in the cutter? Inserts are clamped with a Torx screw M3,5x8,5 tightened using a T10 key, providing repeatable and secure retention for Teknik Makina’s shank cutter S643TM. What are the key dimensions to check for toolholder compatibility? Important dimensions include the 25 mm shank diameter and the 150 mm total length; these determine holder fit and reach for the indexable shank cutter. Can the same cutter be used for different machining tasks? Yes. The cutter accepts changeable indexable inserts, so selecting appropriate insert grades and geometries adapts the tool for a variety of operations and material conditions. Is tool balance or mass provided for high‑speed milling? The data lists a weight of approximately 0.574 kg and standard dimensions; specific balance ratings are defined by the holder and spindle configuration, and insert choice will influence high‑speed suitability for Teknik Makina’s shank cutter S643TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, industry‑grade holder that combines compatibility with APKT 1604 indexable inserts and a rigid 25 mm shank to improve process stability and reduce tool change frequency. Order the tool via Metav Werkzeuge or consult the team for technical alignment with existing toolholders and insert grades. Shank milling cutter – for APKT 1604 indexable inserts, Ø25 mm shank (Teknik Makina, S276TM) The shank milling cutter S276TM is a purpose‑built cutter body for medium‑duty milling operations, engineered to accept APKT 1604 indexable inserts and to deliver predictable performance in serial production and jobbing environments. Indexable for APKT 1604 inserts 25 mm shank diameter for rigid clamping 65 mm effective cutting length Torx M4x10 fastening, T15 key Improved process reliability through stable clamping and geometry The tool body is designed around a 25 mm shank, which delivers increased stiffness and reduced deflection during interrupted cuts. This rigidity translates into better surface finish and more consistent tolerances when machining shoulders or face surfaces. With a cutting angle of 90° and two cutting edges, the geometry supports straightforward, repeatable machining strategies; fewer vibrations and stable engagement reduce the likelihood of premature insert wear, which in turn lowers overall machining cost per component. Faster tool changes and predictable setup for production environments Retention is secured with an M4x10 Torx screw and a T15 key, enabling quick insert replacement and reliable clamping torque without special fixtures. The 65 mm cutting length provides sufficient reach for many operations while keeping tool overhang low, thereby supporting higher metal removal rates under controlled cutting parameters. The standardised fastening and insert interface shortens downtimes and simplifies inventory management when using APKT 1604 inserts from suppliers such as Korloy. Compatibility, maintenance and selection guidance Compatibility with APKT 1604 indexable inserts makes the holder suitable for a broad range of materials and grades; selecting the correct insert grade allows optimisation for steel, stainless steel or cast materials depending on the insert specification. The modular concept avoids the need for special bodies for each application and supports simple maintenance procedures: periodic torque checks on the Torx screw and visual inspection of the pocket and seating face are sufficient to maintain safe, repeatable clamping. For assemblies where runout must be minimised, the robust shank diameter helps preserve concentricity between spindle and cutting edge. Why this cutter fits a workshop or production cell Engineered as a pragmatic solution, the holder delivers a balance of rigidity, ease of service and compatibility that benefits both single‑machine shops and larger production cells. The compact design and standardised insert interface reduce tooling complexity and enable quick adaptation to common milling tasks. In practical terms, adoption of this cutter body can lower tool change time, support predictable cycle times and contribute to a more efficient production flow when paired with appropriate insert grades and cutting data. For technical advice tailored to the application or to request S276TM components and accessories, contact Metav Werkzeuge for guidance and ordering assistance Technical data Article number: S276TM Manufacturer: Teknik Makina Diameter: 25 mm Shank diameter: 25 mm Cutting length: 65 mm Overall length: 200 mm Cutting edges: 2 Weight: 0.75 kg Cutting angle: 90° Compatible with APKT 1604 indexable inserts Insert manufacturer compatibility: Korloy Torx screw: M4x10 Torx key size: T15 Suitable for indexable insert machining FAQ What insert type fits this cutter? The cutter accepts APKT 1604 indexable inserts; it is specified for that insert geometry and mates with Korloy and other compatible APKT 1604 grades. Which shank diameter and overall length does the tool offer? The holder features a 25 mm shank with an overall length of 200 mm and an effective cutting length of 65 mm. How is the insert secured in the pocket? The insert is clamped with an M4x10 Torx screw; a T15 key is used for installation and torqueing. Is the tool suitable for heavy interruption or roughing cuts? The 25 mm shank provides enhanced rigidity for moderate interruption; selection of the appropriate insert grade and cutting parameters is recommended for demanding roughing operations. What is the SKU and who manufactures the tool? The product is listed as S276TM and is manufactured by Teknik Makina as a shank milling cutter for APKT 1604 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid cutter body that combines stable clamping, long cutting length and simple insert replacement for uninterrupted machining. The combination of a 25 mm shank and a 60 mm effective cutting length supports consistent material removal and predictable process stability. Order directly via Metav Werkzeuge or ask the consultants for application advice. Indexable shank milling cutter S220TM — Ø25 mm, for APKT 0903 indexable inserts (Teknik Makina) The Indexable shank milling cutter S220TM is a purpose‑built indexable cutter body for heavy‑duty side and face milling, designed to accept APKT 0903 indexable inserts for fast insert changes and reliable performance Indexable shank milling cutter for APKT 0903 inserts 25 mm shank diameter for stable clamping 60 mm effective cutting length 3 cutting edges for high material removal rates Torx screw M2.5x7 with T8 key for secure insert fixing Greater rigidity for consistent cycle times A larger shank diameter delivers measurable gains in stiffness; the 25 mm shank reduces deflection under load and maintains cutting geometry when machining demanding features. With a 90° cutting angle and a 60 mm cutting length, the tool body provides a stable platform for shoulder milling and full‑width cuts. The resulting benefit is a more predictable machining process with fewer corrective passes and improved first‑pass accuracy, which supports higher throughput and lower scrap rates. Faster serviceability reduces downtime Compatibility with APKT 0903 indexable inserts and a secure Torx M2.5x7 clamping arrangement simplifies insert replacement and repeatable seating. Insert changes are fast and reproducible using a T8 key, lowering mean time to repair and keeping the machine running. The three‑edge cutter geometry balances cutting performance and insert life, enabling longer cycles between maintenance stops while maintaining chip control and surface finish expectations. Practical fit for industry workflows This cutter body is configured for straightforward integration into established tool sets: the overall length of 200 mm and the defined 60 mm effective cutting length suit common setups on compact and medium‑sized milling spindles. The component is supplied ready for standard APKT 0903 inserts produced by major manufacturers, supporting quick tool replacement strategies and consistent process documentation across machining cells. The comparatively low mass of 0.765 kg also aids spindle balance and reduces unnecessary axial load during operations. Reliability and handling in the workshop Designed as an industrial component rather than a consumable, the shank cutter offers secure insert retention and repeatable assembly to help maintain machining quality shift after shift. Compatibility data indicates suitability for insert grades and geometries used in many production environments, enabling tool standardisation across workstations and simplifying stock management. The deliberate mechanical design focuses on minimising vibration and delivering consistent chip evacuation at moderate to high material removal rates. For precise advice on integrating the S220TM into a specific machining setup or to source compatible APKT 0903 inserts, contact Metav Werkzeuge for tailored consultancy and order support. Technical data Article number: S220TM Manufacturer: Teknik Makina Shank diameter: 25 mm Effective cutting length: 60 mm Overall length: 200 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.765 kg Compatible inserts: APKT 0903 Insert screw: M2.5x7 (Torx) Torx key: T8 Compatible insert manufacturer: Walter Special features Indexable shank milling cutter design Rapid insert replacement capability Secure Torx clamping system Three‑edge cutter geometry for balanced performance Compact mass for reduced spindle load FAQ Which inserts fit this cutter body? The cutter accepts APKT 0903 indexable inserts; the S220TM is prepared for standard APKT 0903 geometries as used by major insert manufacturers. What key and screw are required to fix the inserts? Inserts are secured with an M2.5x7 Torx screw, tightened with a T8 key for consistent seating on the S220TM. Is this cutter compatible with Walter inserts? Yes, the body is specified as compatible with inserts from Walter and other manufacturers that adhere to the APKT 0903 specification. What applications suit this cutter body? The tool is intended for side and face milling operations where a 25 mm shank and a 60 mm cutting length deliver the required rigidity and reach, supporting standard production workflows. How does the cutter support process stability? The larger shank diameter and three‑edge geometry reduce deflection and vibration, improving repeatability and surface finish across repeated passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the K661TM's combination of a 20 mm shank and a narrow 2 mm cutting width for precise, low-vibration grooving; the 150 mm overall length provides the stability required for repeatable parting operations. Order the clamp holder through Metav Werkzeuge or consult the specialists for application advice. Parting and Grooving Clamp Holder K661TM — 20 mm shank, 150 mm overall length (Teknik Makina) The Parting and Grooving Clamp Holder K661TM is a compact toolholder designed for precision turning tasks, especially narrow grooving and parting-off operations on conventional and CNC lathes 20 mm shank diameter for standard toolposts 150 mm overall length for stable reach 2 mm cutting width for narrow grooving Compatible with Korloy KGEVR‑KGMN 200 inserts Accurate clamping for consistent parting results The K661TM is built to deliver consistent clamping and repeatable results in production and workshop settings. With a 20 mm shank, the toolholder seats securely in a standard toolpost, reducing micro‑movement during cuts. Compatibility with Korloy KGEVR‑KGMN 200 indexable inserts keeps changeover rapid and predictable, lowering machine downtime. The combination of a short, rigid shank and secure insert mounting translates directly into cleaner grooves and fewer rejects in batch production. Optimised for narrow grooves and fine finishing A 2 mm cutting width and a 45 mm cutting height make this holder particularly effective when machining narrow slots or performing fine parting tasks where material waste must be minimised. The slim cutting geometry helps to control chip formation and reduces the need for excessive machine power, while the holder's rigidity supports a stable cutting environment. For users shifting between roughing and finishing passes, the holder permits quick insert swaps without altering set‑up, saving both time and tool costs. Engineered dimensions for workshop reliability At 150 mm overall length and a modest weight of 0.374 kg, the toolholder balances reach with vibration control — a crucial factor when achieving tight tolerances. The specified 25 mm diameter section and the standard shank designation contribute to predictable tool behaviour across different lathes. This predictability simplifies process planning: the holder can be integrated into existing fixtures with minimal offset adjustments, which is advantageous for small-series manufacturing and maintenance workshops alike. Practical setup and compatibility notes The holder carries the shank designation S20M 2C and relates to the KGMN toolholder family, making it straightforward to match with compatible mounting systems and insert types. The K661TM accepts the listed KGEVR‑KGMN 200 inserts from Korloy, allowing teams to use widely available indexable tips rather than bespoke brazed tools. This interoperability supports stock rationalisation and reduces procurement complexity. Basic set‑up requires correct seating of the insert and torqueing of the clamp screw to the machine maker's specifications to ensure optimal performance. For precision parting and grooving with the Teknik Makina K661TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for stock information and tailored application advice Technical data SKU: K661TM Manufacturer: Teknik Makina Item: Parting and grooving clamp holder Compatible inserts: KGEVR‑KGMN 200 (Korloy) Facts Shank diameter: 20 mm Overall length: 150 mm Cutting height: 45 mm Cutting width: 2 mm Diameter: 25 Weight: 0.374 kg Special features Shank designation: S20M 2C Toolholder designation: KGMN Compatible with Korloy inserts KGEVR‑KGMN 200 FAQ Which inserts are compatible with this holder? The holder accepts Korloy KGEVR‑KGMN 200 indexable inserts; the K661TM is configured for this insert form to ensure secure seating and reliable cutting performance. What shank and mounting designation does it use? The toolholder uses a 20 mm shank and the shank designation S20M 2C, aligned with the KGMN family for straightforward mounting in standard toolposts. Is the toolholder suitable for narrow grooving operations? Yes — with a 2 mm cutting width and rigid clamp design, the holder is intended for narrow groove machining and precise parting tasks. Can the holder be used for both roughing and finishing? The design facilitates quick insert changes, allowing different insert grades for roughing and finishing without major re‑set‑up of the K661TM. What are the main dimensional advantages for workshop use? The 150 mm overall length and compact weight offer a balance of reach and stiffness, reducing vibration and supporting consistent tolerance control in small‑series and production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Compact, indexable design with a 25 mm diameter and 8 cutting edges ensures efficient material removal and precise profiling; the 37 mm cutting height supports deeper passes where required. Order the insert milling cutter HF16TM via Metav Werkzeuge or request specialist advice from our consultants for seamless integration into production. Teknik Makina HF16TM insert milling cutter — 25 mm diameter, 8 cutting edges The Teknik Makina HF16TM insert milling cutter is an indexable milling tool for APKT 1003 inserts, engineered for precise profiling and finishing operations in CNC milling and production environments. 25 mm diameter for compact profiling Eight cutting edges for sustained productivity 25 mm shank for secure clamping Compatible with Korloy APKT 1003 inserts Efficient material removal with consistent results The HF16TM’s combination of a 25 mm diameter and 8 cutting edges delivers stable cutting conditions and a high material removal rate while preserving surface quality. The 37 mm cutting height allows for deeper engagement without frequent step-overs, reducing cycle times in repetitive passes. As an indexable milling cutter, it separates cutting geometry from the holder, enabling fast recovery of cutting performance by simply rotating or replacing an insert rather than regrinding the tool. This design reduces per-part tooling cost and supports continuous, predictable output in batch production. Fast insert changes and secure fixing minimise downtime Maintenance cycles are shortened by the straightforward insert arrangement for APKT 1003 inserts and the use of a standard Torx fixing. The cutter uses an M2.5x5.5 Torx screw and a T08 key size, ensuring secure clamping and rapid exchange under shop-floor conditions. Compatibility with Korloy replacement inserts widens sourcing options and helps maintain spindle uptime. The indexable concept also keeps tool balance and repeatability stable, benefitting both high-feed finishing and contouring tasks where repeat accuracy matters. Robust holder geometry for reliable clamping and rigidity The tool’s 25 mm shank and 200 mm overall length were configured to balance accessibility and rigidity for common milling setups. The solid shank diameter supports conventional collet and chuck systems, reducing chatter risk and improving tool life when used within recommended parameters. The cutter’s multi-edge configuration distributes cutting forces across several inserts, lowering load per insert and enabling more consistent wear behaviour, which gives predictable tool-change intervals and simplifies production planning. Seamless supply and technical assurance from Metav Metav Werkzeuge combines broad inventory with a technical quality filter in Emmerich, ensuring that high-precision tools are accessible to workshops and production lines across Europe. With a wide product range and decades of expertise, Metav supports integration of machining tools like this indexable cutter into existing workflows and offers clarity on logistics and availability. The HF16TM benefits from that reliable supply chain and the option to consult experienced specialists for application-specific recommendations, helping to reduce the risk of unsuitable tooling choices. Secure reliable stock and technical guidance from Metav Werkzeuge — request application advice or a tailored delivery proposal for the Teknik Makina HF16TM insert milling cutter directly from Metav Werkzeuge by e‑mail or phone. Technical data Article number: HF16TM Manufacturer: Teknik Makina Diameter: 25 mm Shank diameter (d): 25 mm Cutting height: 37 mm Number of cutting edges: 8 Overall length: 200 mm Weight: 0.727 kg For indexable inserts: APKT 1003 Compatible insert supplier: Korloy Torx screw: M2.5x5.5 Torx key size: T08 Tool type: Insert milling cutter (indexable) FAQ What inserts are compatible with this cutter? The HF16TM is designed for APKT 1003 indexable inserts and is compatible with Korloy insert variants specified for that geometry. How is the insert secured in the cutter? Inserts for the HF16TM are fastened with an M2.5x5.5 Torx screw; a T08 key is used for tightening and removal to ensure secure clamping. What clamping systems suit the HF16TM? The tool’s 25 mm shank is suitable for standard collet chucks and precision holders capable of accepting a 25 mm diameter shank for optimal rigidity. Can the cutter handle finishing as well as roughing? The multi-edge arrangement of the HF16TM provides a balance between material removal and surface finish; using appropriate feed and depth settings yields efficient roughing while maintaining acceptable finishing quality. Who supplies technical support and availability for this tool? Metav Werkzeuge supplies the Teknik Makina HF16TM and provides application advice and logistics support to assist with tool selection and procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, rigid tool that combines a 25 mm shank with an indexable-insert system and eight cutting edges for stable, efficient milling; order the tool through Metav Werkzeuge or consult the technical team for application advice. Indexable-insert rotary cutter HF07TM — 25 mm shank, 8 cutting edges (Teknik Makina) The indexable-insert rotary cutter HF07TM is a compact milling solution for operations that use APKT 1003 inserts, engineered to deliver consistent chip control and reduced changeover times in production and workshop environments 25 mm shank for secure toolholding Accepts APKT 1003 indexable inserts Eight cutting edges for smooth material removal Stable clamping for accurate, vibration‑reduced machining A rigid 25 mm shank and compact overall length create a stable tool system that reduces deflection during milling. The combination of a short, well‑balanced body and multiple cutting edges means loads are distributed across eight flutes, which improves surface quality and extends insert life. Where process reliability is essential, this configuration supports repeatable results and minimises scrap rates by keeping the cutting geometry consistent throughout the operation. The design promotes steady chip flow and reduced chatter for better finish and dimensional stability. Insert flexibility that keeps production moving Compatibility with APKT 1003 indexable inserts provides flexibility in grade selection and application tuning. Using industry‑standard inserts from suppliers such as Korloy allows quick adaptation to different materials and cutting conditions without replacing the cutter body. The modular approach reduces inventory costs for full‑body cutters and shortens downtime, because worn inserts can be replaced individually. This setup supports both high‑volume repetition and small batch runs where rapid tool changes and consistent results are required. Fast, reliable clamping and serviceability Maintenance and insert exchange are simplified by the proven fastening concept: replacement inserts are secured with M2.5x5.5 Torx screws (Torx key T08). The clear screw specification and standard key size enable rapid, repeatable clamping torque and minimise the risk of incorrect assembly. As a lightweight tool (approx. 0.404 kg) with an overall length of 120 mm, it is easy to handle during setup and inspection while remaining robust enough for routine production use. These features contribute to lower throughput interruptions and predictable maintenance intervals. Practical applications and workflow advantages With a cutting height of 37 mm and a nominal diameter of 25 mm, the cutter suits compact milling operations where space and rigidity matter. The use of indexable inserts makes the system cost‑effective over time, especially for shops that need quick turnaround between jobs. The HF07TM is particularly appropriate where a balance of tool stability, easy serviceability and adaptability to standard insert families is valued. For further technical clarification or to confirm fitment with existing toolholders, the Metav Werkzeuge team provides tailored guidance and specification checks. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina HF07TM and to arrange supply directly from Emmerich — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HF07TM Manufacturer: Teknik Makina Type designation: Indexable-insert rotary cutter Facts Diameter: 25 mm Shank diameter: 25 mm Cutting height: 37 mm Number of cutting edges: 8 Overall length: 120 mm Weight: 0.404 kg Special features Accepts APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M2,5x5,5 Torx key: T08 FAQ Which insert form fits this cutter? The HF07TM accepts APKT 1003 indexable inserts; Korloy‑type APKT inserts are compatible. What is the shank diameter and why does it matter? The shank diameter is 25 mm, providing a rigid connection to the holder and reducing deflection during milling. How many cutting edges does the cutter have and what is the benefit? The tool has eight cutting edges, which spreads cutting forces and improves surface finish while extending insert life. What fastening hardware is required for insert replacement? Insert clamping uses M2.5x5.5 Torx screws and a T08 Torx key for secure, repeatable clamping. Is the HF07TM suitable for compact machining setups? Yes — with an overall length of 120 mm and a compact diameter, the cutter is designed for situations where stability and reduced overhang are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com