Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a sturdy drilling solution that combines precise 25 mm diameter stability, a 75 mm cutting length for deeper holes and reliable shank support — ideal for production runs where repeatability matters; order the U324TM directly via Metav Werkzeuge or consult the team for application-specific advice U324TM solid drill — 25 mm diameter, 75 mm cutting length (Teknik Makina) The U324TM solid drill body designed for industrial metalworking, compatible with Taegutec indexable inserts and optimised for repeatable, production-oriented holemaking 25 mm diameter for high rigidity 75 mm cutting length for deeper holes Compatible with SOMT 08T3 inserts 153 mm overall length for stable tool projection Consistent hole quality through robust geometry and length control The U324TM is engineered to deliver consistent hole quality by combining a sturdy 25 mm diameter body with a 75 mm cutting length, which reduces deflection in longer drilling operations. This geometry supports steady axial forces and improves runout stability, so each hole retains tight dimensional tolerances. For production environments where cycle time and first-pass yield are monitored, the tool’s proportions lower the risk of rework and scrap while maintaining throughput. Insert compatibility that lowers tooling cost and downtime Compatibility with SOMT 08T3 indexable inserts from Taegutec lets workshops replace only the cutting edges instead of complete tools, improving cost efficiency. The insert seat is designed for quick indexing and repeatable positioning, which shortens changeover times and keeps machines running. Clear seating and standardised insert format make it straightforward to switch inserts during shifts, contributing directly to predictable tool costs and simplified inventory management. Dimensions and handling geared for secure clamping and balance Measured at 153 mm overall length with a 56 mm shank length and a 25 mm shank diameter, the tool provides a secure interface with a range of toolholders suited to production spindles. Weighing 0.46 kg, the body balances rigidity with manageable mass for automatic tool changers and manual handling. These dimensional details help technicians select appropriate holders and set correct stick-out to optimise stability and chip evacuation without exceeding machine or process limits. Production-oriented design for dependable repeatability Built for repetitive use, this solid drill body supports predictable repositioning and minimal variation between cycles, qualities valued in batch production and subcontract machining. The construction focuses on repeatable seating of inserts and stable shank support, so teams benefit from lower variation in hole diameter and improved process capability. Where tool life and process reliability are priorities, the design helps to reduce unscheduled interventions and keeps production targets on track. For application advice, insert selection or to procure the U324TM through Metav Werkzeuge, please contact our specialists in Emmerich who can recommend the optimal setup for each machining task Technical data Article number: U324TM Manufacturer: Teknik Cutting Tools Product: Solid drill (Vollbohrer) Compatible inserts: SOMT 08T3 (Taegutec) Facts Diameter: 25 mm Cutting length: 75 mm Overall length: 153 mm Shank length: 56 mm Shank diameter: 25 mm Weight: 0.46 kg Special features Compatible with Taegutec indexable inserts Insert seat for SOMT 08T3 format Designed for repeatable positioning and secure clamping FAQ What insert type does this drill accept? The drill accepts SOMT 08T3 indexable inserts and is specified for compatibility with Taegutec insert formats when using the U324TM drill body What are the key dimensions I should check when fitting the tool? Check the 25 mm diameter, 56 mm shank length and 153 mm overall length to ensure correct clamping and projection for the U324TM solid drill Is the U324TM suitable for automatic tool changers? With a compact weight of 0.46 kg and standard shank proportions, the U324TM is suitable for many automatic tool changer applications when paired with the correct holder Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 25 mm diameter, 50 mm cutting length and a 133 mm overall length for reliable performance in production drilling. Choose direct procurement via Metav Werkzeuge or contact our advisors for specification matching and supply assurance. Vollbohrer — solid drill with 25 mm diameter and 50 mm cutting length by Teknik Makina Vollbohrer is a solid, indexable drilling solution designed for precision holemaking in CNC production and tool rooms. 25 mm diameter for stable deep drilling 50 mm cutting length for secure engagement Compatible with SPMG 07T3 indexable inserts 25 mm shank for rigid clamping in toolholders Consistent hole quality for uninterrupted production The design focuses on reproducible results and reduced cycle-time variation. With a 25 mm diameter and 50 mm cutting length, this indexable drill keeps radial runout low and helps maintain a steady cutting regime. The geometry promotes even chip evacuation and stable cutting forces, which translates into fewer tool changes and more predictable production throughput. The result is a measurable improvement in process stability without introducing complex setup steps. Rigid clamping that improves repeatability on CNC machines A robust 25 mm shank and a total length of 133 mm deliver secure seating in standard toolholders. The solid construction minimises vibration and deflection during engagement, improving concentricity and surface finish on every cycle. For workshops aiming to tighten tolerances and reduce rework, the combination of shank stability and lightweight mass (approx. 0.45 kg) helps preserve tool life and operator time while keeping handling simple. Quick insert changes and lower operating costs The cutter accepts SPMG 07T3 indexable plates and is compatible with inserts from Taegutec and YG-1, so replacement is straightforward and inventory can be standardised across similar tools. Using replaceable inserts reduces the cost per hole and shortens downtime compared with solid-carbide alternatives. The modular approach also enables easy adaptation of grade and geometry to different cutting conditions, improving economic efficiency across batch and continuous production runs. Where this tool adds most value in the workflow Engineered for repeatable drilling tasks in production environments and specialist tool rooms, this indexable solid drill integrates into standard machining setups with minimal adjustment. The practical combination of diameter, cutting length and shank design simplifies fixture planning and tool management. For buyers seeking predictable supply and consistent quality, it integrates well into centralised procurement strategies and supports a reliable, scalable machining process. Contact Metav Werkzeuge for tailored procurement guidance on this Teknik Cutting Tools solid drill — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U925TM Manufacturer: Teknik Makina Product name: Vollbohrer Facts Diameter: 25 mm Overall length: 133 mm Cutting length: 50 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.45 kg Special features For indexable plate: SPMG 07T3 Compatible insert manufacturers: Taegutec, YG-1 FAQ Which indexable insert fits this drill? The Vollbohrer is designed for SPMG 07T3 indexable plates and accepts compatible grades from Taegutec and YG-1. What is the shank diameter and how is it clamped? The tool has a 25 mm shank suitable for standard 25 mm toolholders and collets used in many CNC spindles. What are the key dimensions to check before ordering? Verify the 25 mm diameter, 50 mm cutting length and 133 mm overall length to ensure compatibility with the machine and fixturing. Can the insert choice affect cycle times? Yes — selecting the appropriate insert grade for the application optimises cutting speeds and extends service intervals for the Vollbohrer. Is this tool suitable for small-batch and volume production? The modular indexable design makes it appropriate for both small-batch flexibility and high-volume runs where rapid insert changes improve uptime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, replaceable‑insert milling solution that combines a Ø25 mm shank with four cutting edges and a 30 mm effective cutting length for stable, repeatable machining; order directly via Metav Werkzeuge or consult the team for application guidance. S475TM — Indexable Insert Shank Cutter by Teknik Cutting Tools, Ø25 mm, 4‑edge The S475TM is a robust shank cutter designed for indexable inserts, engineered for medium‑duty milling and slotting tasks where rapid insert changes and consistent surface quality are required. Precision Ø25 mm shank for stable clamping Compatible with Taegutec 4NKT06 indexable inserts Four cutting edges for balanced material removal Torx clamping M3x6,5 with T8 key for secure fixing Stable machining through a rigid shank and balanced geometry The S475TM was developed to give consistent milling results in production and workshop environments. Its Ø25 mm shank provides high radial stiffness in standard tool holders, which reduces vibration and improves surface finish when milling. With four cutting edges, the cutter delivers a balanced cutting action that spreads the load and lowers peak forces, supporting longer tool life of the indexable system. The combination of cutting length 30 mm and total length 120 mm offers a practical reach for many face and slot milling operations while keeping deflection to a minimum. These attributes translate into fewer reworks and more predictable cycle times on the shop floor. Economical, fast‑changing indexable system that reduces downtime Designed around indexable inserts, the tool accepts the 4NKT06 family (compatible with Taegutec), allowing simple replacement of worn cutting edges without regrinding. Insert‑based tooling is a cost‑efficient choice for workshops that seek to reduce tooling stock and maintenance time: one reversible insert change restores original cutting geometry in seconds. The secure fixation by Torx M3x6,5 clamping screw and T8 key ensures repeatable seating of the insert, helping to maintain cutting accuracy and reduce the need for frequent tool checks. This approach supports continuous production with minimal tooling overhead. Simple integration and low‑effort maintenance for workshop use The cutter’s dimensions and standard connection make it straightforward to fit into common milling holders and adapters. With a weight of 0.474 kg, handling and tool changes remain easy for operators, while the Ø25 mm shank conforms to many toolholding systems for immediate integration. Routine maintenance is limited to insert inspection and replacement plus periodic checking of the Torx clamping screw torque; this keeps maintenance cycles short and predictable. The modular concept enables targeted inventory management — keep a few insert grades and one shank cutter to cover a wide range of tasks. Suitable operations and practical recommendations for selection This shank cutter is intended for general‑purpose milling tasks where the 4‑edge insert arrangement provides balanced material removal; typical uses include shoulder milling, slotting and light face milling where replaceable inserts offer the best economy. Selection of the correct insert grade and chipbreaker for the workpiece material is decisive for performance; if specific material data are required or for heavy‑duty applications, consult the technical advisers to match insert geometry and grade to the process. For controlled, repeatable machining with quick insert swaps, the S475TM offers a pragmatic balance of rigidity, accessibility and serviceability. For procurement and application support on the Teknik Cutting Tools S475TM, contact Metav Werkzeuge for tailored advice and local availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s specialists assist with selection and integration into production workflows Technical data Article number: S475TM Brand: Teknik Makina Type: Shank cutter for 4NKT 0603 indexable inserts ECLASS: 21180806 ETIM: EC011860 Core dimensions Shank diameter: 25 mm Cutting length: 30 mm Total length: 120 mm Diameter: 25 mm Cutting edges: 4 Weight: 0.474 kg Features / Compatibility For 4NKT06 indexable inserts Compatible insert manufacturer: Taegutec Torx screw: M3x6,5 Torx key size: T8 SKU: S475TM FAQ Which inserts fit this shank cutter? The cutter accepts 4NKT06 indexable inserts; compatibility with Taegutec 4NKT06 is specified for straightforward sourcing and interchange. How is the insert secured in the cutter? Insert fixation is achieved with a Torx clamping screw M3x6,5 tightened using a T8 key to ensure repeatable seating and secure clamping. What are the main advantages of using this indexable shank tool? The S475TM offers rapid insert replacement, reduced tooling costs through replaceable edges, and a Ø25 mm shank that improves rigidity for consistent surface quality. Can this cutter be used in existing toolholders? Yes — the Ø25 mm shank diameter is compatible with standard holders designed for that size, enabling quick integration into many setups. How long is the effective cutting length and what reach does the tool offer? The tool provides a cutting length of 30 mm and a total length of 120 mm, giving adequate reach for common face and slot milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of robust rigidity, precise indexable-insert compatibility and integrated coolant for reliable milling performance; the tool’s 25 mm solid shank and 40 mm cutting length ensure stable chip control and consistent surface finish. Order the cutter directly via Metav Werkzeuge or ask the consultants if needed. S080TM – 25 mm Solid-shank Milling Cutter with Internal Coolant (for ADKT 10T3 Inserts) by Teknik Makina S080TM is a solid-shank milling cutter engineered for indexable ADKT 10T3 inserts, providing internal coolant delivery for improved chip evacuation and process stability in general milling operations 25 mm solid shank diameter Internal coolant for improved chip flow Compatible with ADKT 10T3 indexable inserts Four cutting edges for balanced cutting Consistent process performance through internal coolant and rigidity The integrated internal coolant channel is designed to deliver cutting fluid directly to the insert seat, which reduces built-up edge, improves chip evacuation and helps maintain cutting-edge temperature under load. Combined with a 25 mm solid shank, the tool offers higher stiffness compared with reduced-shank equivalents; this leads to reduced vibration and more uniform surface quality in interrupted and continuous milling operations. The result is a measurable increase in process reliability and reduced secondary finishing. Fast set-up and flexible insert system for mixed production Compatibility with ADKT 10T3 indexable inserts (Korloy) streamlines tooling inventories and shortens changeover times in batch or mixed-production environments. The cutter accepts the common insert geometry used across many machining centres, allowing straightforward replacement and regrinding strategies. A four-edge configuration balances load distribution across the cutter body and enables consistent material removal rates while preserving the life of each insert. Precision geometry and machining benefits for diverse materials The tool’s 40 mm cutting length and 200 mm overall length create an effective working envelope for shallow to medium-depth shoulder and face milling. The combination of solid construction and four cutting edges provides repeatable radial forces, contributing to predictable toolpaths and dimensional stability. Where finish and tolerance matter, this milling tool supports steady cutting parameters that translate into reduced rework and shorter downstream processing. Practical handling and maintenance in the workshop Designed with standard Torx fastening (T8 key) and supplied screw dimension M2.5x5.5, the cutter simplifies insert clamping and routine swaps without specialised fixtures. The solid shank design and clear coolant provision make maintenance straightforward, while familiar fastening standards reduce the need for special tooling at the machine. The milling tool therefore integrates smoothly into conventional shop workflows and preventive-maintenance cycles. For reliable milling with integrated coolant and proven indexable-insert compatibility, request a detailed technical quote from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application specifics and availability Technical data SKU: S080TM Product type: Solid-shank milling cutter Brand: Teknik Makina Suitable inserts: ADKT 10T3 (Korloy) Core specifications Diameter: 25 mm Total length: 200 mm Shank diameter: 25 mm Cutting length: 40 mm Cutting edges: 4 Weight: 0.59 kg Special features Internal coolant Torx key: T8 Torx screw: M2.5x5.5 Compatible insert manufacturer: Korloy FAQ What materials is the cutter suitable for? The S080TM solid-shank milling cutter is designed for a range of materials when fitted with the appropriate ADKT 10T3 inserts; selection of insert grade will determine suitability for steel, aluminium or harder alloys. Which insert type fits this tool? This milling tool accepts ADKT 10T3 indexable inserts, compatible with Korloy-manufactured grades; the indexable system simplifies switching inserts for different materials or finishes. How does the internal coolant improve machining? Internal coolant in the S080TM delivers lubricant and cooling directly to the cutting zone, improving chip evacuation, reducing cutting temperatures and helping maintain insert life and consistent surface finish. What is the shank diameter and overall length? The tool features a 25 mm shank diameter and a 200 mm overall length, providing rigidity for many milling tasks while allowing sufficient reach for shoulder and face milling. Are standard tools required for insert changes? Insert clamping uses a Torx screw (M2.5x5.5) requiring a T8 Torx key, which are standard tools in most workshops and support quick, repeatable insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a precision-engineered combination of secure insert clamping and a robust 25 mm shank for dependable milling performance; the compatibility with APMT 0602 indexable inserts and Korloy formats keeps spare-part stocks simple and reduces downtime. Order the S007TM end mill directly via Metav Werkzeuge or ask our consultants for technical advice. S007TM end mill for APMT 0602 indexable inserts — 25 mm shank, 30 mm cutting length (Teknik Makina) S007TM end mill designed for indexable APMT 0602 inserts, offering stable, repeatable milling for workshop and production environments Teknik Makina end mill with 25 mm shank For APMT 0602 indexable inserts (Korloy compatible) 30 mm cutting length for deeper cuts Seven cutting edges for stable material removal Precision clamping for consistent production results The tool is engineered around the APMT 0602 indexable system to deliver predictable cutting behaviour and quick insert swaps. With a 25 mm shank and a 30 mm cutting length, the design prioritises axial rigidity and chip evacuation, so the cutter keeps its position under load and reduces chatter. The presence of seven cutting edges distributes cutting forces evenly, which supports longer insert life and fewer interruptions in the production cycle. For manufacturing operations that demand repeatability, the combination of stable geometry and indexable inserts translates into higher process reliability and lower per-component tooling cost. Faster tool changes and dependable clamping for busy shops Changeovers are simplified by the compatible fastening system: the cutter uses an M2x4.2 Torx screw secured with a T6 Torx key, ensuring the insert pocket is locked with consistent torque and minimal setup time. The tool’s 120 mm overall length and compact weight of 0.411 kg strike a balance between reach and control, making it suitable for mounted toolholders in milling spindles. Because only the insert needs replacing when wear occurs, maintenance becomes quicker and less wasteful; this modular approach reduces inventory complexity while keeping machines productive. Clear compatibility and practical benefits explained Compatibility with Korloy APMT 0602 inserts ensures access to a wide range of grades and coatings for different materials and cutting conditions. Indexable inserts allow tailored selection of substrate and coating without changing the whole cutter body, which is particularly useful when switching between roughing and finishing operations. The 90° cutting angle contributes to straightforward face and slot milling geometries, while the robust shank diameter supports stable clamping in standard toolholders. Overall, the design aims to reduce unplanned stoppages, simplify logistics and deliver predictable cycle times on the shop floor. For reliable indexable milling with Teknik Makina quality and quick dispatch from Emmerich, contact Metav Werkzeuge for personalised advice and prompt supply of the S007TM end mill Technical data Article number: S007TM Manufacturer: Teknik Makina SKU: S007TM Facts Shank diameter: 25 mm Cutting length: 30 mm Overall length: 120 mm Weight: 0.411 kg Cutting angle: 90° Number of cutting edges: 7 Special features Suitable for APMT 0602 indexable inserts Compatible with Korloy inserts Torx screw: M2x4.2 Torx key: T6 Designed for stable material removal and fast insert changes FAQ Which inserts are compatible with this cutter? The S007TM end mill is specified for APMT 0602 indexable inserts and is compatible with Korloy APMT 0602 grades. What are the shank and overall dimensions? Shank diameter is 25 mm and overall length is 120 mm, providing a balance of reach and rigidity. How long is the cutting edge and how many edges does it have? The cutter offers a 30 mm cutting length and seven cutting edges to spread cutting forces and improve stability. What fastening parts are required for insert mounting? Insert clamping uses an M2x4.2 Torx screw tightened with a T6 Torx key for secure and repeatable mounting. For which applications is this end mill best suited? This end mill suits operations that use APMT 0602 inserts and seek quick insert replacement, consistent geometry and reduced tooling inventory. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 25 mm shank stability, internal coolant, and precise indexable insert compatibility for reliable, high-productivity milling. Order the end mill directly via Metav Werkzeuge or ask our consultants for tailored tool advice. End Mill for APMT 0602 Indexable Inserts — 25 mm shank, internal coolant (Teknik Makina) End Mill for APMT 0602 Indexable Inserts — Robust cutter body designed for indexable-insert milling in CNC applications, providing stable clamping and integrated coolant for effective chip control. 25 mm shank diameter for stable clamping Internal coolant for improved chip evacuation Compatible with APMT 0602 indexable inserts 120 mm overall length for deep milling operations Rigidity and precision combined for consistent milling performance The tool body is engineered to deliver dimensional stability through a 25 mm shank and a 120 mm overall length, offering a balance between reach and rigidity. With a 30 mm cutting length, the design supports moderate axial engagement while maintaining cutter stiffness, which reduces vibration and improves surface finish. The construction suits CNC setups where repeatable positioning and stable clamping are required; insert changes are quicker than solid-tool regrinds, enabling predictable process control. Faster cycles and controlled chip flow for higher productivity Integrated internal coolant channels direct cutting fluid to the cutting zone, aiding lubrication and chip evacuation to reduce built-up edge and thermal load. The cutter accepts APMT 0602 inserts from Korloy, allowing selection of grades for specific tasks and easier inventory management. With 7 cutting edges, the cutter body increases the effective chip distribution per revolution, which can reduce cycle times and improve machining economy when paired with appropriate insert grades and machining parameters. Practical handling and workshop benefits that reduce downtime Insert retention relies on standard fastenings, using a T6 Torx key and M1.8x4.1 screws for secure clamping and simple replacement. This familiar hardware simplifies maintenance routines, shortens tool-change intervals and contributes to reduced downtime. The modular approach of indexable tooling supports quick adaptation to different workpieces or materials by swapping inserts, while the cutter body itself remains a stable, long-term component of the tooling setup. Contact Metav Werkzeuge today for expert advice on specifying the Teknik Makina indexable end mill with internal coolant (SKU S007-1TM) and to arrange procurement or technical consultation. Technical Data SKU: S007-1TM Manufacturer: Teknik Makina Product type: End mill for indexable inserts Facts Shank diameter: 25 mm Overall length: 120 mm Cutting length: 30 mm Number of cutting edges: 7 Weight: 0.411 kg Special features Internal coolant Compatible insert type: APMT 0602 Compatible insert manufacturer: Korloy Torx key: T6 Torx screw: M1.8x4.1 FAQ Which insert type fits this cutter body? The cutter is designed for APMT 0602 indexable inserts; Korloy APMT 0602 grades are compatible with the S007-1TM tool body. Does the cutter have internal coolant? Yes — the tool features internal coolant, which directs fluid to the cutting zone for better chip evacuation and thermal management. What are the key dimensions to consider for fixture setup? Shank diameter 25 mm, overall length 120 mm and cutting length 30 mm are the main dimensions for fixture and holder selection for the S007-1TM end mill. How are the inserts secured and replaced? Inserts are fastened with M1.8x4.1 Torx screws using a T6 key, enabling secure clamping and straightforward replacement of APMT 0602 inserts. For which applications is this cutter most suitable? The tool body is best for CNC indexable-insert milling tasks that require stable clamping, controlled chip flow and quick insert changes for agile production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a 25 mm shank and precise insert compatibility for reliable milling performance; order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter S236-1TM — 25 mm shank, internal coolant, for APMT 11T3 indexable inserts (Teknik Makina) The Shank milling cutter S236-1TM is a tool body designed for indexable-insert milling operations, offering internal coolant and a compact overall length for stable, repeatable machining. 25 mm shank diameter for stable clamping Internal coolant for improved chip evacuation Compatible with APMT 11T3 (Korloy) inserts Three cutting edges for consistent material removal High-performance machining with built-in coolant The S236-1TM combines a 25 mm shank with an internal coolant channel to support consistent cutting conditions and extended insert life. The internally routed coolant targets the cutting zone to aid chip evacuation and reduce thermal load, which contributes directly to more predictable tool life and fewer unscheduled changeovers. With an 115 mm overall length and a 35 mm cutting-head length, the tool balances reach and rigidity to help maintain cutting parameters across a range of face-milling operations. Precision and repeatability through insert compatibility Designed for use with APMT 11T3 indexable inserts and compatible with Korloy supply, the cutter body enables quick, economical insert indexing without the need to replace the entire head. The triple-edge configuration means each insert secures uniform engagement, delivering reliable chip formation and surface finish in serial production. The combination of a robust shank and the cutter’s mass (approx. 0.423 kg) helps dampen vibration, improving dimensional control and protecting spindle bearings over repeated cycles. Fast serviceability and secure clamping Maintenance and insert changes are straightforward: the cutter uses a Torx T8 key and M2.5x5.5 Torx screws, enabling secure fastening and repeatable seating of the inserts. The standardised fastening system simplifies workshop tooling routines and reduces time at the machine. Built for practical workshop use, the design supports rapid replacement of worn inserts and uncomplicated reassembly, which helps to keep machine utilisation high and production schedules on track. Ideal for workshop and production environments The S236-1TM is suitable as a versatile cutter body for production and job-shop settings where indexable-insert tooling is preferred for cost efficiency and flexibility. Its compact dimensions and coolant capability make it a practical choice for operations that require a balance of reach and rigidity. From short production runs to continuous shifts, the cutter body from Teknik Makina supports processes that demand dependable performance and straightforward tool management. For application advice, availability or to arrange supply of the Teknik Makina shank milling cutter S236-1TM, contact Metav Werkzeuge for technical consultation and reliable delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: S236-1TM Product: Shank milling cutter Designation: Schaftfräser for APMT 11T3 indexable inserts Manufacturer: Teknik Makina Dimensions & core data Shank diameter: 25 mm Overall length: 115 mm Cutting length (head): 35 mm Cutting edges: 3 Weight: 0.423 kg Compatibility & features Internal coolant: yes Compatible inserts: APMT 11T3 Compatible insert supplier: Korloy Torx key: T8 Torx screw: M2.5x5.5 FAQ Is this cutter compatible with APMT 11T3 inserts from Korloy? Yes. The S236-1TM is designed for APMT 11T3 indexable inserts and is specified as compatible with Korloy insert types. How does the internal coolant benefit milling operations? Internal coolant on the S236-1TM directs fluid to the cutting zone, improving chip evacuation and cooling the insert contact area, which helps extend insert life and stabilise cutting forces. What fastening tools are required to change the inserts? Insert replacement on this cutter body uses a Torx T8 key and M2.5x5.5 Torx screws for secure and repeatable clamping. Can this tool be used in standard collet chucks or toolholders? The cutter has a 25 mm shank designed for standard toolholders and collet systems that accept a 25 mm shank; verify holder compatibility with machine tool specifications before mounting. Which production environments suit this cutter body best? The S236-1TM is aimed at production shops and CNC jobbers that benefit from indexable-insert systems—where rapid insert changes, coolant supply and a compact tool body improve uptime and process reliability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Achieve consistent indexable milling with a rigid 25 mm shank, internal coolant and three cutting edges for stable chip control; order this cutter directly via Metav Werkzeuge or consult our specialists for tailored integration. Shank milling cutter for APMT 11T3 indexable inserts — 25 mm shank, internal coolant (Teknik Makina) The Shank milling cutter is a shank-mounted indexable insert tool engineered for medium-duty face and slot milling where reliable chip evacuation and fast insert changes are required. 25 mm shank diameter Internal coolant for improved chip flushing Compatible with Korloy APMT 11T3 inserts Three cutting edges for stable cutting Increased process reliability through rigid design A rigid tool body and a 25 mm shank provide the torsional stiffness required for repeatable machining cycles. The configuration with three cutting edges reduces vibration and stabilises cutting forces, which translates into improved surface finish and extended insert life. With an overall length of 180 mm the tool is suitable for reach-critical setups while the compact 40 mm cutting length keeps overhang low, thereby reducing deflection and contributing directly to higher first-pass quality. Efficient chip control and coolant-fed cutting The internal coolant channel is integrated to deliver cooling and lubricant directly to the cutting zone, promoting effective chip evacuation and temperature control. The wet cutting capability supported by internal coolant is particularly advantageous in interrupted cuts and when machining materials that tend to weld to the insert. Compatibility with APMT 11T3 indexable inserts—from Korloy—allows selection of grades optimised for coated or uncoated operations, making the tool adaptable across a range of ferrous and non-ferrous applications. Fast insert replacement and maintenance-friendly operation Insert clamping uses a Torx system with the specified T8 key and M2.5x5.5 Torx screws, enabling secure retention and rapid index changes. The straightforward clamping concept reduces machine downtime and simplifies tool-room procedures. With a nominal mass of 0.749 kg, the assembly is easy to handle during tooling changes while still offering the mass required for dampening minor chatter in interrupted cuts. Suitable for production environments and workshop integration Designed by Teknik Makina for continuous use in production and job-shop environments, this indexable shank cutter supports a modular tooling strategy: one body accepts multiple inserts to cover roughing and finishing operations. The combination of a standard 25 mm interface and proven insert geometry allows straightforward integration into existing tool holder inventories, supporting predictable cycle times and consistent component quality. For technical specification checks, holder recommendations or to order the Teknik Makina S238-1TM shank milling cutter with internal coolant, contact Metav Werkzeuge for expert advice and prompt supply. Technical information SKU: S238-1TM Manufacturer: Teknik Makina Type: Shank milling cutter Designed for: APMT 11T3 indexable inserts Key specifications Diameter: 25 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 180 mm Number of cutting edges: 3 Weight: 0.749 kg Features & compatibility Internal coolant: yes Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 SKU / UID: S238-1TM FAQ Which inserts fit this cutter? The cutter is designed for APMT 11T3 indexable inserts; the data indicates compatibility with Korloy insert types. Is coolant supplied through the tool body? Yes, the shank milling cutter is equipped with internal coolant to improve chip removal and thermal control. What holder interface is required? A tool holder accepting a 25 mm shank diameter is required for correct seating and clamping of the S238-1TM cutter. What are the overall and cutting lengths? The tool has an overall length of 180 mm and a cutting length of 40 mm, suitable for moderate reach while limiting overhang. Which screw and key are used for insert clamping? Insert clamping uses M2.5x5.5 Torx screws and a T8 Torx key for secure and quick insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise indexing, internal coolant, and a standard 25 mm shank to increase throughput and reduce unscheduled tool changes; order the (indexable insert milling cutter S595-2TM) directly via Metav Werkzeuge or ask our consultants if needed. Indexable insert milling cutter S595-2TM – 25 mm shank, internal coolant (Teknik Makina) A robust indexable insert milling cutter S595-2TM designed for heavy-duty face and shoulder milling using R390 11T3 inserts with internal coolant for consistent chip control. 25 mm shank for standard toolholders Internal coolant for optimised chip evacuation Compatible with Sandvik R390 11T3 inserts 150 mm overall length for extended reach High material removal with predictable tool changes The S595-2TM combines a 25 mm shank with a compact 50 mm cutting length, offering a balance between rigidity and reach that supports sustained cutting conditions. With three cutting edges, the cutter delivers stable engagements and predictable wear patterns, which simplifies tool life planning and reduces unexpected downtime. The precision of the clamping and the use of standard fixing screws (Torx T8, screw M2.5x7) allows rapid insert changes and repeatable seating, translating directly into higher productive time per shift. Internal coolant for improved surface finish and longer life The tool’s internal coolant supply directs cutting fluid precisely to the insert edge, improving chip evacuation and reducing cutting temperatures. This focused cooling helps maintain dimensional stability in longer production runs and can extend the service intervals of the cutting tips. Designed for the R390 11T3 system, the cutter accepts widely available inserts from Sandvik, enabling a straightforward stocking strategy and fast replacement cycles that keep machining cells running with minimal intervention. Workshop integration and handling benefits With an overall length of 150 mm and a measured mass of 0.557 kg, the cutter is engineered to integrate with standard milling setups while minimising unnecessary load on spindles. The 25 mm shank diameter is compatible with common collet and hydraulic chuck systems, making retrofits and tool swaps uncomplicated. The solid construction and clear assembly interface mean maintenance is straightforward, supporting predictable logistics and a reliable tool management routine on the shop floor. For reliable high-throughput milling with Teknik Makina quality, contact Metav Werkzeuge for availability and technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 to secure stock from our Emmerich warehouse. Technical data SKU: S595-2TM Manufacturer: Teknik Makina Product type: Indexable insert milling cutter Compatible inserts: R390 11T3 (Sandvik) Internal coolant: Yes Torx key: T8 Torx screw: M2.5x7 Core specifications Diameter: 25 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length (shank end to tip): 50 mm Cutting edges: 3 Weight: 0.557 kg Features and compatibility Internal coolant channel Compatible with Sandvik R390 11T3 indexable inserts Rapid insert change via Torx T8 fixing Suitable for face and shoulder milling operations FAQ Which inserts fit this cutter? The cutter accepts R390 11T3 indexable inserts; compatible inserts from Sandvik are recommended for optimal seating and performance. Does the tool provide coolant through the shank? Yes, the S595-2TM features an internal coolant supply to the insert zone for improved chip control and temperature management. What are the shank and overall dimensions? The tool has a 25 mm shank diameter and an overall length of 150 mm, with a 50 mm cutting length. How many cutting edges does the cutter have and how does that affect productivity? The cutter uses three cutting edges, balancing material removal rate and stability to provide predictable tool life and efficient machining cycles. Which fixing hardware is required for the inserts? Insert clamping uses a Torx T8 driver and M2.5x7 fixing screws for secure and repeatable insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a 25 mm shank, internal coolant supply and compatibility with RPMT 1204 indexable inserts, this milling cutter provides efficient material removal and improved process reliability; order directly via Metav Werkzeuge or consult our specialists for integration advice. R325-3TM — 25 mm indexable milling cutter with internal coolant (Teknik Makina) R325-3TM is a 25 mm shank indexable milling cutter engineered for medium- to heavy-duty milling using RPMT 1204 indexable inserts and a coolant-fed bore for stable cutting performance Robust 25 mm shank for secure clamping Internal coolant supply for improved tool life Designed for RPMT 1204 indexable inserts 200 mm overall length for extended reach Fast insert change with T15 Torx key and M4x8.5 screw High-efficiency cutting with indexable inserts for reduced cycle times The cutter is built around RPMT 1204 indexable inserts, a widely used insert geometry that permits rapid replacement and repeatable cutting performance. Using replaceable inserts rather than solid cutters lowers tooling costs per component and reduces machine downtime, which translates into a measurable improvement in throughput. The tool’s two cutting edges deliver balanced chip loads and help maintain surface finish while enabling higher feed rates. For operations where predictable cycle times and consistent part quality are essential, this design supports a clear return on investment via lower tooling consumption and faster set-ups. Coolant-fed design that improves tool life and surface quality An integrated internal coolant channel supplies cutting fluid directly to the cutting zone, which cools the insert edge, reduces built-up edge formation and assists chip evacuation. These effects prolong insert life and stabilise the cutting process, producing better surface finishes and fewer rework operations. For shops transitioning from external flood cooling to through-coolant systems, the coolant-fed arrangement reduces thermal shock to the tool and helps maintain consistent metallurgical conditions at the cut, which is particularly valuable when machining tougher alloys or when running longer uninterrupted cycles. Practical dimensions and workshop-friendly features for reliable operation With a 25 mm shank, 200 mm overall length and a 60 mm cutting length, the tool offers a balance of rigidity and reach suitable for many fixture layouts. The cutter accepts inserts from Korloy configured to RPMT 1204, and insert retention is secured with an M4x8.5 screw operated by a T15 Torx key, enabling quick insert changes and minimal maintenance time. The compact number of cutting edges simplifies inventory management while supporting efficient chip clearance. These characteristics make the cutter well suited to production environments seeking durable, easy-to-maintain tooling that integrates with standard holders and clamping systems. For demanding milling tasks where process reliability and fast insert exchanges matter, choose the Teknik Makina 25 mm indexable milling cutter and contact Metav Werkzeuge for procurement or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: R325-3TM Product type: Indexable milling cutter Label: 25mm schaftfräser RPMT 1204 L200mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 200 mm Cutting length: 60 mm Shank diameter: 25 mm Cutting edges: 2 Special features Internal coolant supply For RPMT 1204 indexable inserts Insert manufacturer compatibility: Korloy Torx key: T15 Torx screw: M4x8.5 FAQ What insert type does this cutter accept? The R325-3TM accepts RPMT 1204 indexable inserts configured for the cutter’s pocket geometry and clamp system. Is the tool suitable for use with Korloy inserts? Yes, the cutter is compatible with inserts from Korloy that conform to the RPMT 1204 specification. How is coolant supplied to the cutting edge? Coolant is delivered via an internal coolant channel in the R325-3TM that feeds the cutting zone directly to aid cooling and chip control. What key and screw are required for insert changes? Insert retention uses an M4x8.5 screw and a T15 Torx key for secure and quick insert replacement on the R325-3TM. What are the critical dimensions for fixture planning? Key dimensions are a 25 mm shank diameter, 200 mm overall length and 60 mm cutting length for the R325-3TM; these inform clamping and reach considerations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a rigid, coolant-fed design and a 25 mm shank that delivers stable clamping and consistent chip control; combine that with compatibility for RPMT 1204 Korloy inserts and obtain reliable indexable milling performance. Order directly via Metav Werkzeuge or consult our technical team for application advice. Indexable milling cutter R325-2TM — 25 mm shank, internal coolant (Teknik Makina) A indexable milling cutter R325-2TM engineered for coolant-fed machining with RPMT 1204 indexable inserts, offering secure clamping and reach for recessed and shoulder milling tasks 25 mm shank diameter for rigid clamping Internal coolant for improved chip evacuation Compatible with RPMT 1204 inserts (Korloy) 60 mm cutting length for shoulder milling Stable clamping that keeps production predictable The combination of a 25 mm shank and a thoughtfully balanced body ensures rigidity at the cutter seat, reducing vibration during engagement. The holder’s design supports a consistent contact interface with the machine spindle, which leads to repeatable cutting conditions and more predictable tool life. With 2 cutting edges the tool provides a controlled chip load per tooth, helping to maintain a steady material removal rate and reducing the risk of chatter on interrupted cuts. These attributes translate into fewer reworks and a smoother production flow for repetitive milling operations. Coolant-fed machining to extend insert life and improve finishes Built-in internal coolant channels deliver lubricant and cooling directly to the cutting zone, supporting temperature control and enhanced chip breaking. Direct coolant supply minimises heat at the insert edge, which can slow wear progression and help sustain a consistent surface finish over longer machining cycles. The tool is specified for RPMT 1204 indexable inserts and, as supplied, is compatible with Korloy grades — a practical solution where frequent insert replacement and straightforward maintenance are part of the production rhythm. Fast insert clamping and standard screw specification simplify consumable management in the workshop. Designed for efficient handling and quick maintenance With an overall length of 160 mm and a 60 mm cutting length, the cutter combines reach with compactness, allowing access to medium-depth pockets while keeping overhang manageable. The assembly uses a Torx T15 key and M4x8.5 fixing screws for secure insert retention and easy replacement when inserts are indexed. At around 0.607 kg, the assembly is light enough for simple handling during tool change routines, yet substantial enough to assure stability during cuts. This balance supports shorter downtime during insert changes and straightforward stocking of replacement screws and inserts for uninterrupted production. For reliable workshop performance and tailored advice on applications for the Teknik Cutting Tools R325-2TM, request a technical quote from Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for specific recommendations and delivery options Technical Data Article number: R325-2TM Manufacturer: Teknik Makina Label: 25mm Schaftfräser RPMT 1204 L160mm mit Innenkühlung SKU: R325-2TM Facts Diameter: 25 mm Shank diameter: 25 mm Overall length: 160 mm Cutting length: 60 mm Number of cutting edges: 2 Weight: 0.607 kg Internal coolant: yes Torx key: T15 Torx screw: M4x8.5 Special features Compatibility with RPMT 1204 indexable inserts Compatible insert manufacturer: Korloy Indexable milling cutter category Standardised fixing screws for easy maintenance FAQ What insert type fits this cutter? The cutter accepts RPMT 1204 indexable inserts and is specified for compatibility with Korloy insert grades for a reliable fit and performance. Does the tool provide coolant directly to the cutting edge? Yes, the tool features internal coolant channels that feed lubricant and coolant to the cutting zone to improve chip evacuation and help preserve insert life. What is the usable cutting length of the cutter? The tool has a 60 mm cutting length, offering sufficient reach for shoulder milling and medium-depth operations. Which fastening hardware is used for insert retention? Insert clamping uses Torx T15 engagement with M4x8.5 screws, enabling secure retention and straightforward replacement procedures. Is the cutter suitable for high-overhang applications? The overall length of 160 mm provides moderate reach; the 25 mm shank helps maintain rigidity, but for excessive overhangs seek a suitability check based on the specific machine and workpiece setup. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise insert compatibility, reliable internal coolant and robust 25 mm shank design to maintain consistent cycle times and reduce tool change frequency. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. Shank cutter S838-1TM (for XNKT 0604 indexable inserts) — 25 mm shank, internal coolant (Teknik Makina) Shank cutter S838-1TM engineered for milling operations with Korloy XNKT 0604 indexable inserts, offering internal coolant delivery and a compact overall length for versatile workshop use. Internal coolant for improved tool life Compatible with Korloy XNKT 0604 inserts 25 mm shank diameter for standard holders Three cutting edges for stable machining Efficient machining through dedicated insert compatibility The S838-1TM is designed around the Korloy XNKT 0604 insert system, which simplifies tool management and reduces setup time. Because the tool accepts a widely used insert format, tool changeovers become predictable and repeatable; this leads to fewer interruptions on the shop floor and more consistent part quality. The combination of indexable inserts and the cutter body creates a cost-effective solution for shops that prefer insert replacement over regrinding, supporting steady production flow and lower lifetime tooling costs. Improved process stability with internal coolant and rigid shank Internal coolant is routed directly to the cutting zone, enhancing chip evacuation and heat control during aggressive milling. This cooling method helps maintain cutting-edge integrity and reduces built-up edge, which in turn supports longer insert life and consistent surface finish. The 25 mm shank and three cutting edges contribute to mechanical stability and balanced cutting forces, making the cutter suitable for many medium-duty milling tasks where vibration control and predictable tool behaviour are priorities. Practical handling, fast assembly and maintenance benefits The cutter is supplied with a Torx M3x7 fastening screw and requires a T8 Torx key for secure insert clamping, ensuring quick and repeatable insert changes. The overall length of 150 mm and a cutting length of 40 mm allow adaptation to common holder setups while keeping overhang moderate for improved stiffness. With a weight of 0.572 kg, the body is manageable during set-up and compatible with standard toolholders. These tangible handling advantages translate into faster maintenance cycles and reduced downtime in production environments. Contact Metav Werkzeuge for tailored application advice and to discuss delivery options for the S838-1TM shank cutter; technical consultants can assist with insert selection and machining parameter recommendations — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S838-1TM Product type: Shank cutter Model: for XNKT 0604 indexable inserts Brand: Teknik Makina Facts Diameter: 25 mm Overall length: 150 mm Cutting length (shank cutting): 40 mm Number of cutting edges: 3 Shank diameter: 25 mm Weight: 0.572 kg Special features Internal coolant Compatible with Korloy XNKT 0604 inserts Torx key: T8 Torx screw: M3x7 SKU: S838-1TM FAQ What inserts fit this cutter? The S838-1TM accepts Korloy XNKT 0604 indexable inserts, which are the specified insert family for this shank cutter model. Is the tool suitable for heavy overhangs? With a 25 mm shank and an overall length of 150 mm, the S838-1TM is optimised for moderate overhangs; extreme overhangs may reduce stiffness and should be avoided for highest process stability. How is cooling provided to the cutting zone? Cooling is delivered via internal coolant, routed through the cutter body directly to the insert seats to improve chip evacuation and control cutting temperature. Which fasteners are required for insert clamping? Insert clamping uses an M3x7 Torx screw and a T8 Torx key, facilitating quick and secure insert replacement. Can the cutter be used with other insert brands? The shank cutter is specified for Korloy XNKT 0604 inserts; compatibility with other brands depends on exact insert geometry, so checking seat dimensions and clamping compatibility is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable solution that combines internal coolant, a 25 mm shank and compatibility with XOMX 1204 indexable inserts for stable, efficient milling; order or request advice via Metav Werkzeuge for a smooth integration into production. Shank milling cutter S643-1TM — 25 mm shank, internal coolant (Teknik Makina) The Shank milling cutter S643-1TM is an indexable milling tool designed for industrial milling tasks where quick insert changes and consistent coolant supply increase throughput 25 mm shank diameter for stable clamping Internal coolant for improved tool life and chip evacuation Compatible with XOMX 1204 indexable inserts by SECO 150 mm overall length for extended reach Deliver higher metal removal rates with indexable inserts The S643-1TM is engineered to boost productivity through an indexable insert concept that reduces downtime for regrinding and optimises cost per cut. The combination of a 25 mm shank and three cutting edges provides rigidity and a balanced load distribution, which results in higher permissible feeds and longer effective tool life. With internal coolant, heat at the cutting zone is reduced and chips are flushed directly from the insert pocket, improving surface finish and extending insert life while maintaining reliable cycle times. Rigid design and straightforward maintenance for continuous operation A compact overall length of 150 mm combined with a cutting length of 55 mm ensures a favourable stiffness-to-reach ratio, reducing vibration in demanding operations. The tool accepts XOMX 1204 indexable inserts and is matched to SECO-style inserts for broad availability. Fast insert changes are secured by a Torx T10 key and M3.5x8.5 Torx screw system, simplifying maintenance routines and lowering mean time to repair. The robust construction and clear connection for coolant supply support stable machining in repeated production cycles. Suitable for versatile milling tasks in a production environment This indexable cutter is intended for tasks that benefit from insert-based tooling: pocketing, shoulder milling and general peripheral milling where tool life, repeatability and serviceability matter. The tool’s three-edge configuration balances cutting forces and enables conservative stepovers or heavier cuts depending on the machining strategy. Lightweight handling at 0.574 kg facilitates tool changes on automatic tool changers while maintaining the mechanical integrity required for industrial use. For reliable high-performance milling with Teknik Makina quality and internal coolant, contact Metav Werkzeuge for tailored technical advice and to secure the S643-1TM for the workshop Technical details SKU: S643-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Label: 25mm shank milling cutter XOMX 1204 L150mm with internal coolant Numeric data Shank diameter: 25 mm Overall length: 150 mm Cutting length (shank): 55 mm Number of cutting edges: 3 Weight: 0.574 kg Features / Special characteristics Internal coolant: yes Compatible inserts: XOMX 1204 Compatible insert manufacturer: SECO Torx key: T10 Torx screw: M3.5x8.5 FAQ Which inserts fit this cutter? The cutter accepts XOMX 1204 indexable inserts; compatibility is specified for SECO-style inserts for straightforward sourcing. Does the tool provide internal coolant? Yes, the S643-1TM includes internal coolant routing to the insert pocket for improved cooling and chip evacuation. How many cutting edges does the tool have? The tool is configured with three cutting edges, providing a balance between material removal rate and cutting stability. What is the shank size and overall reach? Shank diameter is 25 mm and the overall length is 150 mm, with a cutting length of 55 mm for extended reach while maintaining rigidity. Which fastening system is used for the inserts? Inserts are secured with a Torx screw system: Torx T10 key and M3.5x8.5 Torx screw are specified for insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise indexable-insert milling combined with robust clamping and long cutting reach — the result is consistent cycle-time savings and predictable finish quality. Order the cutter directly via Metav Werkzeuge or ask the consultants for application advice. Shaft cutter for RDMT 12T3 (R244TM) — Ø25 mm shank, 2 cutting edges A Shaft cutter for RDMT 12T3 (R244TM) designed for indexable-insert milling in industrial CNC applications Ø25 mm shank diameter 70 mm cutting length Two cutting edges for stable machining Secure clamping with M3.5 lock screw Stable material removal with compact, rigid design The tool is engineered to deliver consistent material removal thanks to its stiff Ø25 mm shank and a compact mass of 0.74 kg, which together reduce vibration during interrupted cuts. With two cutting edges the holder balances cutting forces and achieves an even surface quality while keeping spindle load predictable. Compatibility with RDMT 12T3 indexable inserts allows the use of established carbide inserts for repeatable results in batch production and short-series machining. Fast insert changes and secure clamping for high uptime Maintenance and insert replacement are simplified by the defined clamping system: the cutter uses a M3.5 locking screw and a M3.5x8.5 Torx screw secured with a T15 key, which enables controlled torque and repeatable seating of the insert seat. This mechanical arrangement reduces set-up time and minimises the risk of incorrectly tightened screws, helping to sustain throughput. The clear screw specification supports predictable maintenance intervals and easier spare-part planning. Extended reach for deeper profiles and versatile applications An overall length of 200 mm together with a 70 mm cutting length provides an extended effective reach for deeper pocketing or stepped features while maintaining a compact toolbody close to the spindle. The design suits a variety of milling tasks where indexable inserts are preferred for cost-effective tool management, delivering a balance between accessibility and rigidity. The holder’s dimensions and geometry support reliable chip evacuation when paired with appropriate machining parameters. Precision in everyday production The R244TM holder integrates straightforward, measurable features — shank diameter, cutting length and screw types — into a package that supports stable cycle times and predictable tool life. The documented specifications make process planning and CAM programming simpler, as the mechanical limits are evident and verifiable. For manufacturers focused on reproducibility and efficient insert use, this cutter is a pragmatic choice that aligns with industrial CNC workflows. For reliable indexable-insert milling with Teknik Makina quality, contact Metav Werkzeuge for availability of the R244TM shaft cutter and tailored application guidance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: R244TM Manufacturer: Teknik Makina Shank diameter: 25 mm Cutting length: 70 mm Overall length: 200 mm Cutting edges: 2 Weight: 0.74 kg Core data For inserts: RDMT 12T3 Locking screw: M3.5 Torque screw: M3.5x8.5 Torx key: T15 Diameter: 25 mm Special features Indexable-insert holder design Suitable for CNC milling applications Robust shank for reduced vibration Quick, repeatable insert changes FAQ What insert type fits this holder? The shaft cutter accepts RDMT 12T3 indexable inserts, which are seated and clamped using the specified M3.5 locking system for repeatable positioning. Can the tool be used for deep pocketing on CNC machines? Yes — with an overall length of 200 mm and a 70 mm cutting length, the holder provides extended reach suitable for deeper pockets when process parameters are adapted. What fastening hardware is required for insert changes? Insert changes use the M3.5 locking screw together with the M3.5x8.5 Torx screw, tightened using a T15 Torx key to ensure secure and repeatable clamping. Is this cutter appropriate for heavy interrupted cuts? The robust Ø25 mm shank and two-edge configuration help control vibration and cutting forces, making the holder suitable for demanding interrupted cuts within the limits of the chosen insert grade. Which SKU and brand should be quoted when ordering? Order referencing Teknik Makina R244TM ensures the correct shaft cutter and accessory set for RDMT 12T3 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise 25 mm bore capacity, 100 mm cutting length and a robust 25 mm shank for stable, repeatable holemaking; order directly via Metav Werkzeuge or contact our consultants for tailored application advice. Indexable Drill U422TM – 25 mm diameter, 100 mm cutting length (Teknik Makina) The Indexable Drill U422TM is an industrial indexable drill designed for efficient holemaking in metalworking, combining an intermediate reach with secure clamping for consistent cycle times 25 mm diameter for standard boremaking 100 mm cutting length for deeper holes Compatible with SOMT 08T3 insert type 25 mm shank for rigid toolholding Consistent bore quality and process reliability The tool delivers repeatable hole geometry by combining a defined cutting zone with a solid clamping interface. The 25 mm diameter and 100 mm cutting length ensure stable chip formation in through or deep-hole operations, reducing the need for rework. For users migrating from solid drills, the indexable design lowers tooling costs per hole because only the SOMT 08T3 inserts need periodic replacement rather than the whole tool body. This leads to measurable productivity gains and fewer machine interruptions in batch production. Fast maintenance and lower consumable cost Designed for straightforward insert replacement, the drill accepts SOMT 08T3 inserts from Taegutec, enabling rapid service intervals and minimal downtime. The modular approach means maintenance is limited to changing inserts and a short inspection of the seat, rather than complex regrinding. The result is improved process economics: lower per-hole tooling expense and quicker turnarounds when performing scheduled maintenance or index changes on the shop floor. Stable clamping and controlled reach for accurate positioning With a 25 mm shank and a total length of 178 mm, the holder balances reach and rigidity. The defined 56 mm clamping length improves axial stability, which reduces vibration and supports tighter tolerances in serial production. Where fixturing and repeat accuracy are essential, this configuration helps maintain concentricity and surface finish while keeping feed rates efficient. The tool’s mass (approx. 0.498 kg) is optimised for common spindle setups without compromising balance. Practical application guidance for workshop integration The drill is suitable for use where indexable insert systems are preferred over solid carbide solutions for economic reasons or ease of service. When pairing the tool with inserts, verify seat condition and torque on the clamping screws to maintain cutting performance. For uncertain machine compatibility or to refine cutting data for a specific alloy, Metav Werkzeuge’s advisory service can assist with feed/speed recommendations and insert selection, ensuring the tool achieves its intended productivity improvements. Contact Metav Werkzeuge for expert application advice and order processing for Teknik Makina indexable drills; Metav Werkzeuge’s specialists will support selection of the correct insert and ensure prompt delivery from Emmerich Technical data SKU: U422TM Manufacturer: Teknik Makina Product name: Indexable Drill U422TM Measured values Diameter: 25 mm Cutting length: 100 mm Shank diameter: 25 mm Clamping length: 56 mm Overall length: 178 mm Weight: 0.498 kg Special features Compatible insert type: SOMT 08T3 Compatible insert brand: Taegutec Tool type: indexable drill Application: metalworking holemaking FAQ What materials is this drill suitable for? The Indexable Drill U422TM is designed for general metalworking applications; insert choice and cutting data determine effectiveness for specific alloys Which inserts fit the tool? This drill accepts SOMT 08T3 inserts; Taegutec plates are compatible as indicated for the U422TM What are the essential dimensions to check before ordering? Confirm the 25 mm diameter, 25 mm shank and 178 mm overall length match the machine’s toolholder and the intended hole depth for the application How does the indexable design benefit production? With replaceable inserts the U422TM reduces per-hole tooling cost and shortens maintenance time compared with replacing a whole solid drill Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, insert-based drilling solution that combines a 25 mm diameter and 100 mm cutting length for consistent hole-making performance; order the indexable insert drill U618TM directly via Metav Werkzeuge or ask the consultants for compatibility advice. Indexable insert drill U618TM by Teknik Makina — 25 mm Ø, WCM-0503 compatible The indexable insert drill U618TM is a purpose-built drill body designed for machining centres and drilling units that require a 25 mm system and accept WCM‑0503 inserts 25 mm diameter for standard hole sizes 100 mm cutting length for deeper holes Compatible with WCM-0503 indexable inserts Robust 183 mm overall length, 56 mm shank Precise hole-making with an insert‑based system The unit is engineered as an indexable insert solution that combines repeatable performance with economical tooling management. With a nominal 25 mm diameter and a 100 mm cutting length, the tool body supports consistent chip evacuation and predictable machining cycles. Using a standard insert format such as WCM‑0503 reduces inventory complexity and shortens changeover times, since compatible inserts from established suppliers such as Korloy are accepted. The result is improved process stability and a measurable reduction in downtime when inserts are rotated or replaced. Stable clamping geometry for reduced vibration and longer tool life A compact overall length of 183 mm together with a 56 mm shank provides secure clamping and greater concentricity at the spindle. The relatively low mass of 0.526 kg contributes to reduced dynamic imbalance while keeping handling straightforward for set-up staff. These mechanical properties translate into lower tool deflection and enhanced surface quality at the bore, which is especially beneficial for production runs where repeatability is essential. The construction supports standard toolholding systems and helps maintain consistent runout characteristics across batches. Designed for production workflows and fast serviceability The modular nature of the system supports swift insert replacement and straightforward inventory management, which benefits shops aiming to maximise machine uptime. The tool body’s acceptance of WCM‑0503 inserts enables flexible cutting edge selection for different machining tasks without replacing the entire tool. Maintenance becomes a matter of changing inserts rather than renewing complete drills, delivering both ecological and economic advantages. For procurement and workshop planning, the U618TM integrates into existing processes with minimal additional tooling requirements, aligning with Metav’s commitment to reliable supply and practical workshop support. Contact Metav Werkzeuge for a tailored recommendation on the U618TM indexable insert drill and to confirm compatibility with existing inserts and holders Technical Data Article number: U618TM Manufacturer: Teknik Makina Data Diameter: 25 mm Cutting length: 100 mm Shank length: 56 mm Overall length: 183 mm Weight: 0.526 kg Compatible insert type: WCM-0503 Special features Compatible inserts by Korloy Indexable insert drill body Compact design for stable clamping Files: 62de7ec30f56dbb4de4dbf2d, 62de7dd9148ec6b71020ff6b FAQ Which inserts fit this drill? The drill body accepts WCM‑0503 indexable inserts; Korloy‑specified inserts are compatible with the U618TM. What are the key dimensions to check for machine compatibility? Check the 25 mm diameter and 56 mm shank length; the overall length is 183 mm for ensuring sufficient clearance. How long is the cutting edge engagement? This tool provides a 100 mm cutting length, suitable for medium‑deep hole operations within its design envelope. Is this tool suitable for quick insert changes on the shop floor? Yes, the indexable design allows inserts to be replaced independently of the body, which reduces downtime and simplifies maintenance procedures. What is the SKU and who manufactures the tool? SKU: U618TM; manufactured by Teknik Cutting Tools and distributed via Metav Werkzeuge for the European market. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable drill solution that combines a 25 mm cutting diameter with a 125 mm cutting length for consistent, deep-hole performance; compatibility with Korloy WCM-0503 inserts reduces tooling costs and downtime. Order the tool directly via Metav Werkzeuge or ask our consultants for application-specific guidance. Indexable Insert Drill – 25 mm Ø, 125 mm cutting length | Teknik Makina The indexable insert drill by Teknik Makina is a precision drill body designed for medium-deep holemaking and integration into machining centres and turning centres with holders accepting a 25 mm shank. Versatile 25 mm cutting diameter Extended 125 mm cutting length Compatible with Korloy WCM-0503 inserts Robust shank Ø 25 mm, 56 mm clamping length Engineered for consistent hole quality and low running costs This indexable drill body delivers repeatable hole geometry by combining a defined cutting length of 125 mm with a 25 mm nominal diameter. The use of indexable inserts means that the cutting edges can be renewed in seconds, which reduces tool change time and lowers overall operating costs compared with solid regrindable drills. The construction provides a stable tool centre, which helps maintain concentricity and reduces the need for rework when producing batches or serial components. For users unfamiliar with insert systems: replacing a worn insert restores cutting performance without the need for regrinding the entire tool. Straightforward integration with common toolholders and insert systems Designed with a shank Ø 25 mm and a clamping length of 56 mm, the drill body fits holders and adaptors that accept nominal 25 mm shanks, enabling fast retrofitting into existing tool setups. Compatibility with Korloy insert geometry WCM-0503 allows the use of widely available insert grades and coatings for varied materials. The relatively light mass (approx. 0.678 kg) reduces spindle load while preserving rigidity, making the component suitable for production environments where tool change simplicity and machine uptime are priorities. Durable design for reliable chip control and productive cycles The tool’s geometry and indexable concept contribute to predictable chip evacuation and stable cutting conditions over extended runs. Where consistent finish and dimensional stability matter, the replaceable insert approach reduces cumulative wear effects and extends the effective life of the tool body. Combined with Metav’s focus on dependable supply and quality filtering from its Emmerich base, the drill body supports continuous operation and lowers the risk of unexpected downtime in busy workshops. Contact Metav Werkzeuge for availability and tailored advice on insert selection and machine setup – email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Teknik Cutting Tools indexable drill body (SKU U785TM) and suitable Korloy inserts Technical data Article number: U785TM Manufacturer: Teknik Makina SKU: U785TM Cutting diameter: 25 mm Cutting length: 125 mm Total length: 208 mm Shank diameter: 25 mm Shank clamping length: 56 mm Weight: 0.678 kg Compatible insert manufacturer: Korloy Compatible insert type: WCM- 0503 Tool design: Indexable insert drill body Intended holder size: for holders accepting Ø25 mm shank FAQ Which insert type is required for this drill body? The drill body requires Korloy WCM-0503 inserts; the Teknik Makina indexable drill (SKU U785TM) is designed to accept that specific insert format. Can the drill be used in standard 25 mm holders? Yes, the tool features a shank Ø 25 mm and a 56 mm clamping length, so it is suitable for holders that take a 25 mm shank. What is the maximum effective cutting length? The effective cutting length is 125 mm, enabling deeper holemaking without the need for extensions in many applications. How does the indexable system affect operating costs? Using replaceable inserts like WCM-0503 reduces the need for full-tool replacement or regrinding, lowering per-hole tooling costs and shortening downtime for maintenance. Is the tool suitable for a production environment with frequent tool changes? Yes, the indexable design and common insert compatibility simplify changeover and support high-uptime production workflows with predictable performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of 25 mm diameter, 50 mm cutting length and secure shank design for reliable holemaking. Optimised for indexable insert use, the tool reduces downtime through fast insert changes and predictable chip behaviour — order the tool directly via Metav Werkzeuge or request application guidance from our specialists. U118TM indexable insert drill by Teknik Cutting Tools — 25 mm diameter, 50 mm cutting length The U118TM indexable insert drill is an indexable insert drill body designed for efficient, repeatable holemaking in general machining applications using Korloy WCM-0503 inserts 25 mm diameter for standard holemaking 50 mm cutting length for stable penetration 56 mm shank length for secure clamping Compatible with Korloy WCM-0503 inserts Consistent hole quality through controlled cutting geometry The body’s 50 mm cutting length and defined geometry deliver a steady material removal rate and improved chip control, which reduces the risk of built-up edge and rework. Using an indexable concept with the WCM-0503 insert separates cutting edge wear from the holder, so replacement is quick and economical; the result is lower lifecycle cost compared with regrinding solid drills. For shops aiming to increase first-pass yield, the combination of cutting length and insert system translates into fewer interrupted cycles and more predictable results. Stable clamping for improved runout and surface finish A 56 mm shank length combined with the tool’s overall mass provides higher rigidity at moderate overhangs, limiting vibration and runout. The reduced movement at the cutting point supports a finer bore tolerance and extended insert life. With a compact overall length of 133 mm and a tool weight of 0.42 kg, the design balances stiffness and handling, making it suitable for both CNC spindle work and turret-style drilling heads where secure clamping is essential for repeatability. Practical fitment and workshop efficiency Compatibility with Korloy WCM-0503 inserts simplifies inventory: standardised inserts allow rapid replacement and reduce the number of unique spare parts required. The 25 mm shank interface and clear specification of shank and cutting dimensions mean straightforward integration into existing toolholders and collet systems. Clear labelling of core dimensions supports process planning and cutter selection, enabling quicker setup and less trial-and-error at the machine. Speak to Metav Werkzeuge for tailored application advice and procurement of the Teknik Cutting Tools U118TM indexable insert drill — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: U118TM Manufacturer: Teknik Makina Diameter: 25 mm Cutting length: 50 mm Shank length: 56 mm Overall length: 133 mm Weight: 0.42 kg Compatible inserts: WCM-0503 Insert manufacturer compatibility: Korloy Tool type: Indexable insert drill body FAQ What insert type is required for this drill body? The drill body accepts WCM-0503 indexable inserts; the design is matched to that insert geometry for secure seating and consistent cutting performance. Can the tool be used in standard toolholders? The tool’s shank and overall dimensions are specified for common clamping systems; measure the holder interface against the 56 mm shank length and 25 mm diameter to confirm fit. How does the indexable concept affect maintenance? With the indexable approach, worn cutting edges are replaced quickly without regrinding the holder; this reduces machine downtime and simplifies spare part management for the workshop. Is the U118TM suitable for high-speed drilling? Performance at elevated speeds depends on machine capability, insert grade and cutting parameters; the U118TM provides a rigid platform, while the cutting speed limits are determined by the chosen insert and workpiece material Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust drilling solution that combines precise holemaking with easy insert replacement; the 25 mm diameter and 56.5 mm cutting length deliver consistent results while the 32 mm shank ensures stable clamping for machining centres. Order the component via Metav Werkzeuge or consult Metav’s specialists for application advice. Indexable drill — 25 mm diameter, 32 mm shank (Teknik Makina) Indexable drill designed as a drill body for machining centres and CNC turning/milling stations, suitable for medium-depth holes and indexable inserts in metalworking applications High radial stability with 32 mm shank Available cutting length 56.5 mm for deeper holes Compatible with Korloy QC-- 130404 inserts Balanced at 0.6 kg for secure spindle handling Reliable holemaking with controlled geometry and repeatability The tool body is engineered to provide consistent hole quality, using a 25 mm nominal diameter and a 56.5 mm cutting length to achieve repeatable depths in series production. The 32 mm shank ensures secure clamping in standard toolholders, which reduces runout and contributes to accurate form and position tolerance. Presented as an indexable drill body, the construction allows for quick correction of cutting geometry by replacing inserts rather than regrinding tools, maintaining production stability and lowering rework rates. Reduced downtime through insert compatibility and practical serviceability Compatibility with Korloy indexable inserts (type QC--130404) means predictable tooling cycles and easy procurement of replacement cutting edges. The 60 mm shank length supports adequate reach for most fixture setups without compromising rigidity, while the moderate mass of 0.6 kg simplifies handling during tool changes and reduces unnecessary spindle load. These attributes lead to a measurable reduction in setup time and an improved cost-per-hole metric, particularly where frequent insert changes are part of the process strategy. Integration into existing workflows and clear ordering references Designed for straightforward integration into workshop tool inventories, the component fits common clamping systems thanks to its standardised 32 mm shank and overall length of 135 mm. The article is referenced as U042TM for procurement and inventory management, facilitating rapid identification in ERP systems. For machine shops seeking a reliable indexable solution, the drill body supports consistent production throughput and predictable maintenance intervals, backed by Metav’s distribution and advisory capabilities. Contact Metav Werkzeuge for a specification check and order the Teknik Cutting Tools indexable drill body (U042TM) to ensure the correct insert match and mounting for the intended machine setup; Metav’s advisors can provide machining recommendations and supply logistics from Emmerich Technical data Article number: U042TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Facts Diameter: 25 mm Overall length: 135 mm Cutting length: 56.5 mm Shank diameter: 32 mm Shank length: 60 mm Weight: 0.6 kg Special features Compatible inserts: QC-- 130404 Compatible insert manufacturer: Korloy Tool type: Indexable drill body SKU: U042TM FAQ What insert type fits this drill body? The drill body accepts indexable inserts of type QC-- 130404; compatibility is specified for Korloy inserts and confirmed for the Teknik Cutting Tools indexable drill (U042TM). Which shank diameter is required for mounting? A 32 mm shank diameter is specified; the 32 mm shank ensures secure clamping in standard toolholders for stable machining performance. What is the effective cutting length and overall reach? The effective cutting length is 56.5 mm and the overall length is 135 mm, offering sufficient reach for medium-depth drilling tasks. How should this tool be referenced when ordering? Order under the SKU U042TM and reference the Teknik Cutting Tools indexable drill body (Teknik Makina) to ensure correct supply and insert compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of reliable rigidity and efficient insert replacement: the combination of a 25 mm drill diameter and 75 mm cutting length delivers stable chip control and consistent hole quality. Order the Vollbohrer U160TM directly via Metav Werkzeuge or ask our consultants if needed. Vollbohrer U160TM — indexable drill body with 25 mm diameter and 75 mm cutting length (Teknik Cutting Tools) A Vollbohrer U160TM designed as an indexable drill body for production drilling tasks, compatible with standard WCM-0503 inserts and intended for integration into CNC and machining-centre tool inventories. 25 mm drill diameter 75 mm cutting length Compatible with WCM-0503 inserts 158 mm overall length Precise drilling performance for production environments The indexable drill body delivers consistent axial stability thanks to its 25 mm diameter shank and a clamping length of 56 mm, which together reduce runout and improve hole accuracy. With a 75 mm cutting length and a total length of 158 mm, the tool balances reach and rigidity for through-hole and shallow-depth operations. The construction supports repeatable positioning in the spindle, enhancing part-to-part consistency and lowering scrap rates in series production. Fast insert changes and reduced downtime Designed for use with WCM-0503 inserts from common suppliers such as Korloy, the drill body simplifies maintenance: inserts are indexed or replaced without removing the entire tool, cutting changeover time and associated labour. The standardised insert interface ensures predictable cutting geometry and facilitates stock management of wear parts. Reduced downtime and straightforward insert handling translate into improved machine utilisation and a favourable cost-in-use profile. Integration into workshop toolsets and process reliability Suited to machining-centre workflows, the tool body offers a compact footprint (weight approx. 0.467 kg) while maintaining mechanical stability for interrupted or continuous drilling cycles. The design supports industrial tool management strategies by allowing compatibility across machines that accept a 25 mm shank. When paired with a consistent insert supply and correct process parameters, the assembly delivers repeatable cycle times and stable surface finish, making it a practical choice for production and maintenance departments. Contact Metav Werkzeuge for tailored application advice on the Teknik Cutting Tools Vollbohrer U160TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and ordering options Technical data Article number: U160TM Manufacturer: Teknik Makina Product name: Vollbohrer eClass: 21180201 Dimensions & core data Diameter: 25 mm Cutting length: 75 mm Shank/clamping length: 56 mm Overall length: 158 mm Weight: 0.467 kg Shank/adapter diameter (aufnahme_mm_d): 25 mm Compatibility & features Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy Tool type: Indexable drill body FAQ Which inserts fit the drill body? The drill body accepts WCM-0503 indexable inserts; compatibility with Korloy-specified grades is confirmed for the Teknik Cutting Tools Vollbohrer U160TM. What are the key dimensions to check before fitting? Verify the 25 mm shank diameter, 56 mm clamping length, and the 158 mm overall length to ensure correct mounting and sufficient reach for the intended application. Is the tool suitable for CNC machining centres? Yes, the indexable design and standardised shank dimensions make the tool suitable for integration into CNC and automated machining setups; the Vollbohrer U160TM supports predictable performance in production contexts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, 25 mm drill body that combines precise holemaking with easy insert replacement; its 117 mm overall length and compatibility with XC-- 130404 indexable inserts ensure consistent production results. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Drill body U25TM — 25 mm diameter, 117 mm overall length, for XC-- 130404 indexable inserts by Teknik Makina The Drill body U25TM is a robust toolholder designed for indexable-insert drilling applications, offering a compact footprint and straightforward insert mounting for workshop and light industrial use. 25 mm cutting diameter Compatible with XC-- 130404 inserts 117 mm overall length Consistent hole quality for demanding operations The U25TM drill body delivers repeatable results through a combination of a defined 56.5 mm cutting length and a solid construction that promotes precision in serial drilling. The clear dimensional setup (including a 25 mm diameter and 117 mm overall length) reduces setup guesswork and simplifies process documentation, which is especially valuable in production environments where consistent hole diameter and positional accuracy directly affect downstream assembly and part interchangeability. The modest mass of 0.6 kg contributes to handling convenience without compromising stability. Reduced downtime through an indexable-insert concept Designed specifically for XC-- 130404 indexable inserts, the tool body facilitates rapid insert changes and predictable cutting behaviour. Compatibility with Taegutec inserts ensures access to established grades and geometries, so worn edges are replaced rather than regrinded, shortening maintenance cycles and lowering life-cycle costs. The indexable approach supports efficient inventory management of cutting edges and helps maintain cutting performance across shifts, emphasising operational reliability and cost-efficiency in routine production. Compact, rigid design that supports stable machining A sturdy shank and precise interface dimensions—including a 32 mm shank diameter and a 60 mm shank length—provide a stable connection to standard toolholders and reduce vibration during drilling. The compact overall size aids accessibility in confined set-ups while the engineered geometry promotes even load transfer to the machine spindle, contributing to consistent tool life and surface finish. Where fixture space is limited, this combination of rigidity and compactness helps preserve part quality and machine uptime. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Cutting Tools drill body U25TM with 25 mm diameter and 117 mm overall length; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific operations Technical Data Article number: U25TM Label: 25mm Vollbohrer XC-- 130404 L117mm Manufacturer: Teknik Cutting Tools / Teknik Makina SKU: U25TM Facts Diameter: 25 mm Overall length: 117 mm Cutting length: 56.5 mm Shank length: 60 mm Shank diameter: 32 mm Weight: 0.6 kg eClass: 21180201 Special features Compatible with XC-- 130404 indexable inserts Recommended insert manufacturer: Taegutec Product type: Drill body Bezeichnung_2_en: for XC-- 130404 Indexable Inserts FAQ What insert type fits this drill body? The drill body accepts XC-- 130404 indexable inserts; use inserts from Taegutec as specified for optimal fit and performance. What are the key dimensions to check for machine compatibility? Check the 25 mm diameter, 117 mm overall length and the 32 mm shank diameter to ensure correct holder and spindle compatibility for the U25TM. Can worn cutting edges be replaced on site? Yes; the indexable design means cutting edges are replaced rather than resharpened, so maintenance is reduced and service intervals are predictable for the U25TM. Is the tool suitable for confined setups? The compact geometry and 60 mm shank length of the drill body support installation in tighter work envelopes while preserving stability during drilling. What does the SKU U25TM refer to? SKU U25TM identifies the 25 mm drill body version intended for XC-- 130404 inserts manufactured under the Teknik Makina product line. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine precise 25 mm diameter with a 56.5 mm cutting length and proven compatibility with XC-- 130404 indexable inserts for efficient, repeatable holemaking; order the tool directly via Metav Werkzeuge or consult Metav's technical team for application matching. Indexable-insert Drill Body U068TM — 25 mm, L117 mm by Teknik Makina The Indexable-insert Drill Body U068TM is an indexable-insert drilling solution engineered for CNC holemaking using XC-- 130404 indexable inserts, delivering consistent bore quality and straightforward insert changes in production environments 25 mm nominal diameter for standard bore ranges 56.5 mm effective cutting length for deep holes Compatible with Ceratizit XC-- 130404 inserts 60 mm shank length for stable clamping Predictable hole tolerances through insert-based drilling The XC-- 130404-compatible design places repeatability at the forefront: by using indexable inserts the system separates cutting geometry from the tool body, which keeps bore tolerances steady across batches. The combination of a 25 mm diameter and a defined 56.5 mm cutting length enables predictable chip evacuation and consistent tool engagement, reducing variation between consecutive holes. For process planners, insert geometry control means machining outcomes can be standardised without replacing the whole tool, supporting quality assurance in small and medium series. Faster recovery and lower tool-change overhead Switching worn or damaged cutting edges is considerably quicker with an insert-based solution than with regrinding solid tools. The modular concept of the drill body shortens maintenance intervals and reduces overall tooling cost per hole. Because insert replacement is localised to the cutting head, machine downtime is minimised and spare-part logistics become simpler, which directly improves spindle utilisation and throughput in CNC operations where tool-change time is critical. Stable clamping and reliable axial support With an overall length of 117 mm and a 60 mm shank length, the drill body provides robust support in standard toolholders. The engineered proportions contribute to axial stability during plunge and peck cycles, reducing vibration and runout effects that can impair surface finish and hole cylindricity. The modest mass (approx. 0.6 kg) balances rigidity and manageable handling for toolroom procedures, ensuring reliable clamping force without excessive overhang. Compatibility that eases procurement and inventory Designed for use with XC-- 130404 inserts from Ceratizit, the system aligns with widely available insert portfolios, easing replenishment and interchangeability. Standardising on a common insert family simplifies inventory management and allows purchasing departments to consolidate suppliers across multiple machines. The clear match to established insert geometries also helps application engineers choose cutters that fit existing machining parameters and coolant strategies. Practical advantages within CNC workflows The tool body concept supports stepwise process optimisation: trialling a new insert grade or coating can be achieved without acquiring new holders, allowing fast evaluation of cut conditions and surface finish improvements. This flexibility is particularly beneficial in mixed-production shops or subcontract milling centres that process varied materials; the ability to adapt insert type quickly leads to improved first-pass yield and fewer corrective operations. Clear specification for system integration For procurement and CAM programming, the key specification elements are immediate: 25 mm diameter, 56.5 mm cutting length, 60 mm shank length, 117 mm overall length, and compatibility with XC-- 130404 inserts. The SKU U068TM and ECLASS identifier support ordering and ERP integration. When selecting holders or adapting tool libraries, these measurable values allow rapid verification of reach, clearance and clamping requirements to ensure trouble-free commissioning on CNC machines. For fast technical matching and reliable supply of Teknik Makina indexable-insert tooling, contact Metav Werkzeuge for a tailored quote or application consultation at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav's specialists assist with insert selection and delivery logistics. Technical data SKU: U068TM Label: 25mm Vollbohrer XC-- 130404 L117mm Product type: Indexable-insert drill body Manufacturer: Teknik Makina Facts Diameter: 25 mm Cutting length: 56.5 mm Shank length: 60 mm Overall length: 117 mm Holder diameter: 32 mm Weight: 0.6 kg ECLASS: 21180201 Special features Compatible with XC-- 130404 indexable inserts Compatible insert manufacturer: Ceratizit SKU for ordering: U068TM Designed for CNC holemaking and insert replacement FAQ What hole sizes can be produced with this drill body? The Indexable-insert Drill Body U068TM produces nominal 25 mm bores and supports the specified 56.5 mm cutting length for through or partial-depth holes within that diameter range. Which inserts fit the drill body? This drill body accepts XC-- 130404 indexable inserts; insert geometry and grades from Ceratizit are compatible with the holder interface. Is the tool suitable for production CNC machines? Yes, the holder geometry and 60 mm shank length provide stable clamping for CNC applications where repeatability and reduced tool-change time are priorities. How is the product identified for purchasing systems? Order using the SKU U068TM and reference the ECLASS 21180201 to ensure correct ERP mapping and catalogue alignment. What are the primary advantages of using this indexable-insert concept? The indexable-insert approach reduces downtime for edge changes, lowers per-hole tooling cost and enables fast trials of insert grades without replacing the tool body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust indexable shank cutter that combines precise clamping, high metal removal and easy insert serviceability; its 25 mm shank and 45 mm cutting length support stable, repeatable milling while the Torx fixing reduces downtimes. Order directly via Metav Werkzeuge or consult the specialists for application advice. Shank Milling Cutter S018TM — 25 mm shank, for AXMT 0602 & APKT 0903 inserts (Teknik Makina) A compact Shank Milling Cutter S018TM engineered for indexable inserts, intended for medium-duty side and face milling where secure clamping and repeatable cutting performance are required 25 mm shank diameter for stable clamping 3 cutting edges for efficient material removal 45 mm cutting length, 120 mm overall length Torx M2.5×5.5 screw, T8 key included Efficient productivity through proven indexable technology The cutter is built for productive machining with indexable inserts, offering fast reconditioning by merely replacing the insert rather than the whole tool. Its 25 mm shank ensures a rigid connection to common toolholders, which reduces vibration and increases tool life in interrupted and continuous milling operations. With three effective cutting edges, the tool achieves a balanced combination of chip evacuation and cutting stability, translating into steady metal removal rates and predictable cycle times. Precision design for repeatable results and easy maintenance A 45 mm cutting length paired with a 120 mm overall length makes the tool suitable for a broad range of part geometries while maintaining stiffness near the cutting zone. The insert clamping uses a Torx M2.5×5.5 fixing screw and a T8 key, allowing secure seating and quick index changes on the shop floor. The relatively low mass of 0.447 kg helps with dynamic balance and reduces centrifugal loads at higher spindle speeds, aiding surface finish and dimensional repeatability. Material compatibility and insert guidance The tool is designed for use with AXMT 0602 and APKT 0903 indexable inserts and is compatible with inserts from Taegutec, allowing customers to select grades and geometries that match their workpiece material and cutting conditions. Selecting a carbide grade and coating suited to the substrate will govern cutting speed and wear resistance; the insert system enables rapid adaptation between roughing and finishing strategies without altering the holder. Operational benefits for the workshop workflow By adopting an indexable system, maintenance is shifted from tool replacement to fast insert changes, reducing inventory of full-bodied cutters and improving uptime. The combination of a standardised 25 mm shank and common insert formats supports cross-compatibility with many existing holders and machines, simplifying tool management. The Torx fastening provides repeatable clamp torque, which supports consistent cutting geometry and long-term process stability. Recommended use cases and setup advice Ideal applications include face milling, shoulder milling and light slotting where medium depths of cut and stable clamping are possible. For optimal results, pair the cutter with inserts chosen for the workpiece—tougher grades for interrupted cuts and coated, wear-resistant grades for high-speed finishing. Ensure the toolholder run-out is minimised and that the Torx screw is torqued to the specified value for secure insert clamping and best performance. Contact Metav Werkzeuge for tailored machining recommendations and procurement from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S018TM Brand: Teknik Makina Compatible inserts: AXMT 0602, APKT 0903 Compatible insert manufacturer: Taegutec Fastening screw: Torx M2.5×5.5 Torx key: T8 Facts Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.447 kg Special features For AXMT 0602 and APKT 0903 indexable inserts Compatible with Taegutec insert grades Indexable system for quick insert changes Torx screw retention for secure clamping FAQ What inserts are suitable for this cutter? The cutter accepts AXMT 0602 and APKT 0903 inserts; Taegutec grades are explicitly compatible and offer options for roughing or finishing. Is the shank suitable for standard toolholders? Yes, the 25 mm shank fits common 25 mm collets and holders; correct clamping is advised to maintain run-out below recommended tolerances. How is the insert secured in the cutter? Inserts are fixed with a Torx M2.5×5.5 screw requiring a T8 key; the Torx interface provides repeatable torque and secure seating. Can the tool be used for both roughing and finishing? Yes; changing the insert grade and geometry adapts the cutter from high-removal-rate roughing to fine finishing without replacing the holder. What is the tool’s weight and why does it matter? The tool weighs 0.447 kg, which contributes to balance and reduced centrifugal load at higher spindle speeds for improved surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust 25 mm shank and compatibility with APMT 0903 indexable inserts for flexible end-milling operations, plus a secure Torx clamping system for rapid, repeatable insert changes; Order the shaft milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft milling cutter S049TM – for APMT 0903 indexable inserts, 25 mm shank (Teknik Makina) The Shaft milling cutter S049TM is a dedicated cutter body engineered for use with APMT 0903 indexable inserts, designed to serve in industrial milling setups where fast insert changes and predictable performance are required. 25 mm shank diameter Compatible with APMT 0903 inserts 4 cutting edges Torx screw M2.5x5.5 (T8) Secure insert compatibility for flexible milling The holder is built to accept APMT 0903 indexable inserts from established manufacturers such as Korloy, which allows a shop to select grades and geometries tailored to specific workpiece materials. Using an indexable system separates insert life from body life: the cutter body provides the rigid interface and repeatable positioning, while the chosen insert grade determines wear behaviour. This separation reduces tooling costs over time and permits quick adaptation to different jobs without replacing the entire tool body. Consistent cutting performance and efficient chip management With a 25 mm shank and an overall length of 130 mm, the tool balances rigidity and accessibility for typical milling operations; the 4 cutting edges distribute cutting forces and help maintain a stable load per edge. The defined cutting height 30 mm and the four-edge configuration support steady chip formation and reduced vibration when clamping and spindle speeds are correctly matched. These mechanical characteristics translate into predictable machining results and fewer quality reworks in series production. Fast, safe insert clamping for reduced downtime Changeover speed and repeatability are supported by a Torx clamping system: the Torx screw M2.5x5.5 tightened with a T8 key secures inserts reliably while remaining quick to operate. The precise screw specification ensures consistent clamp force and repeatable seating of inserts, which is essential for maintaining tolerance and surface finish. Tool handling is simplified, which improves workflow continuity on the shop floor and shortens non-productive time between setups. Contact Metav Werkzeuge for stock availability and technical advice on the Teknik Makina shaft milling cutter S049TM; our Emmerich team can assist with application matching and supply coordination Technical data Article number: S049TM Manufacturer: Teknik Makina SKU: S049TM Facts Shank diameter: 25 mm Diameter: 25 mm Cutting height: 30 mm Overall length: 130 mm Number of cutting edges: 4 Weight: 0.44 kg Special features Compatible with APMT 0903 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 For use as a shaft-mounted milling cutter body FAQ Which inserts fit this cutter? The shaft milling cutter S049TM is designed for APMT 0903 indexable inserts; compatible inserts from Korloy and equivalent manufacturers can be used provided they match the APMT 0903 form. What are the key dimensions to consider for setup? Important dimensions for setup include the 25 mm shank, 130 mm overall length and 30 mm cutting height, which determine rigidity, reach and the maximum insert exposure. How is an insert secured and what tool is required? Inserts are secured with a Torx screw M2.5x5.5; a T8 Torx key is required for tightening and loosening to ensure correct clamp force and repeatable seating. Is the cutter ready to use with existing milling holders? The S049TM provides a standard 25 mm shank suitable for holders and collets designed for that diameter; ensure correct clamping method and run-out tolerances for best performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com