Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of robust clamping, precise insert compatibility and a long cutting reach to keep production steady; order the S296TM directly via Metav Werkzeuge or consult our advisors for application advice. Shank-mounted milling cutter S296TM – 25 mm shank, for LOEX 0804 indexable inserts by Teknik Makina A Shank-mounted milling cutter S296TM engineered for use with LOEX 0804 indexable inserts, offering a 25 mm shank and a 40 mm cutting length for reliable mounting and consistent machining performance 25 mm shank diameter for stable clamping 40 mm cutting length for deep passes Compatible with LOEX 0804 indexable inserts Secured with M2.5×7 Torx screw (T8 key) Superior stability for consistent milling results The Shank-mounted milling cutter S296TM delivers high mechanical stability through its 25 mm shank and substantial 150 mm overall length, reducing vibration and helping to maintain dimensional accuracy over extended runs. The 4 cutting edges and a 90° cutting angle are optimised for shoulder and face milling where square shoulders and flat surfaces are required; this geometry limits deflection and distributes cutting forces evenly. For production planning, the cutter’s 0.604 kg weight and balanced geometry simplify toolholder selection and spindle load calculations. The combination of these characteristics supports predictable tool life and process stability in machining centres. Easy insert handling and tool maintenance Compatibility with LOEX 0804 indexable inserts provides a pragmatic route to lower tooling costs and quicker service intervals compared with solid-tool approaches. The cutter is SECO-compatible, so insert procurement and grade selection can follow established supplier ranges. Fastening is achieved with a M2.5×7 Torx screw operated with a T8 key, enabling rapid index changes and secure clamping of the insert pocket. For operations managers, this means shorter downtime for tool changes and clearer inventory control: standardised inserts and a compact fastening method reduce routine maintenance time while preserving cutting performance. Productivity advantages and application guidance With a 25 mm diameter and 40 mm cutting length, the tool suits operations that require a balance between reach and rigidity. The 4-flute layout supports efficient chip evacuation and steady cutting forces at moderate feeds, contributing to shorter cycle times when paired with appropriate insert grades and machining parameters. For users new to indexable systems, indexable inserts separate abrasive wear from the tool body: worn inserts are changed instead of replacing the entire cutter, which improves cost-per-cut and simplifies quality assurance. When selecting insert grades and cutting data, match the LOEX 0804 insert grade to the workpiece material and machining strategy to achieve the best combination of surface finish and tool life. Contact Metav Werkzeuge for tailored technical guidance on the S296TM by Teknik Makina and to arrange supply direct from our Emmerich facility Technical data Article number: S296TM Manufacturer: Teknik Makina Designation: Shank-mounted milling cutter for LOEX 0804 indexable inserts Compatible insert manufacturer: SECO eCl@ss: 21180806 ETIM: EC011860 Facts Shank diameter: 25 mm Cutting length: 40 mm Diameter: 25 mm Number of cutting edges: 4 Cutting angle: 90° Overall length: 150 mm Weight: 0.604 kg Torx screw: M2.5×7 Torx key size: T8 Special features For LOEX 0804 indexable inserts SECO-compatible insert geometry Indexable-insert milling concept 4-flute geometry for chip control Secured by M2.5×7 Torx fastening FAQ What insert type fits this cutter? The cutter accepts LOEX 0804 indexable inserts; the Shank-mounted milling cutter S296TM by Teknik Makina is built around that insert format Is the cutter compatible with SECO inserts? Yes, the tool is SECO-compatible, allowing the use of many common LOEX 0804 variants from that supplier in the S296TM How is the insert fastened in place? Inserts are secured with a M2.5×7 Torx screw, tightened or released using a T8 key for secure clamping on the S296TM What applications suit this shank-mounted cutter? The geometry (90° cutting angle, 4 flutes, 25 mm diameter) makes the cutter suitable for shoulder milling and light face milling where a square shoulder and stable finish are required; final suitability depends on insert grade selection for the specific workpiece Can the cutting length and shank size affect toolholder choice? Yes, the 40 mm cutting length and 25 mm shank should be matched to a suitable toolholder and spindle specifications to maintain rigidity and achieve the desired surface finish with the S296TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact, indexable-insert solution that combines a 30 mm cutting diameter with a 25 mm shank for increased rigidity and predictable runout; the two cutting edges and 55 mm cutting length reduce changeover time and maintain steady material removal rates. Order directly via Metav Werkzeuge or consult the technical team for turnkey integration advice. Shank milling cutter for RDMT 12T3 indexable inserts — 30 mm diameter, 25 mm shank | Teknik Makina The Shank milling cutter for RDMT 12T3 indexable inserts is a precision insert milling tool designed for stable, repeatable machining where quick insert replacement and secure clamping are required 30 mm cutting diameter 25 mm hardened shank diameter Compatible with RDMT 12T3 inserts Two cutting edges, 55 mm cutting length Deliver consistent metal removal and stable runout for precise components The 30 mm diameter and 25 mm shank create a rigid interface that reduces vibration and improves surface finish compared with oversized overhangs. With two cutting edges, the cutter offers an efficient balance between material removal and chip control, while the 55 mm cutting length provides a useful axial reach for shoulder and face milling. These dimensional choices translate into repeatable part geometry and fewer quality reworks on the shop floor, which supports higher first-pass yield and more predictable cycle times. Rapid insert changeover and secure clamping minimise downtime Insert retention is engineered around a M3.5 locking screw and a M3.5x8.5 Torx screw, tightened with a T15 Torx key, enabling fast, tool‑less‑style insert swaps without compromising clamp integrity. This familiar Torx system speeds set-up and reduces fixture time between jobs, so indexable inserts can be rotated or replaced swiftly. The clear separation of clamp hardware also simplifies inventory for maintenance teams and reduces the risk of incorrect fastener use. Robust handling and ergonomic advantages for everyday production At a nominal weight of 0.536 kg, the tool balances rigidity with manageable handling for loading and unloading from tool magazines. The defined shank diameter helps ensure secure clamping in standard collets and holders, improving concentricity and extending tool life through reduced runout-induced wear. Together, these characteristics deliver quieter operation and lower vibration-related tool failure, which supports continuous production and fewer unexpected stoppages. Versatile use cases and clear procurement benefits Designed for insert milling with RDMT 12T3 plates, this cutter suits general production environments that rely on indexable systems for flexibility and cost-effective edge refresh. Its overall length of 150 mm gives typical machine tool compatibility, while the defined cutting geometry supports repeatable pocketing, face milling and shoulder work where indexable solutions are preferred. For purchasing teams, the documented SKU R237TM simplifies reordering and traceability across maintenance logs and ERP systems. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools shank milling cutter can be specified for production, check toolholder compatibility or request a tailored supply plan Technical data SKU: R237TM Manufacturer: Teknik Makina Description: Shank milling cutter for RDMT 12T3 indexable inserts Numbers / Core technical data Cutting diameter: 30 mm Shank diameter: 25 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.536 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Designs / Special features Compatible with RDMT 12T3 indexable inserts Indexable-insert system for fast edge changes Balanced geometry for reduced runout FAQ Which inserts are compatible with this cutter? The cutter accepts RDMT 12T3 indexable inserts, as specified for the shank milling cutter. What hardware is required to change an insert? Insert clamping uses a M3.5 locking screw and a M3.5x8.5 Torx screw; a T15 Torx key is required for secure tightening. What are the key dimensions to check for toolholder compatibility? Confirm the 25 mm shank diameter, 30 mm cutting diameter and 150 mm overall length in the toolholder specification to ensure proper seating and magazine clearance. Is this cutter suitable for automated tool magazines? The defined shank diameter and total length support standard magazine systems; check the magazine’s capacity for the 25 mm shank and 150 mm overall length. How is the cutter identified for reordering and maintenance tracking? Use the SKU R237TM for procurement, maintenance records and reordering to ensure exact replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 25 mm shank, internal coolant and compatibility with WNMX 0603 Korloy inserts for consistent, high-performance milling; order directly via Metav Werkzeuge or consult our experts for application advice. Indexable Insert End Mill S905-1TM — 25 mm shank, internal coolant (Teknik Makina) The shaft milling cutter for WNMX 0603 indexable inserts, engineered for stable milling operations where reliable chip evacuation and secure insert clamping are essential. 25 mm shank diameter for robust toolholders Internal coolant for improved chip evacuation Compatible with WNMX 0603 Korloy inserts Three cutting edges for efficient material removal Stable performance through robust shank and coolant The cutter combines a 25 mm shank with an optimised body designed to maintain rigidity under load, which contributes to consistent cutting conditions during series production. The integrated internal coolant channel directs lubricant and coolant precisely to the cutting zone, improving insert life and reducing heat-related wear. These features support reproducible results and reduce the frequency of unplanned tool changes, making the tool well suited for operations that demand reliability and stable cycle times. Secure clamping and straightforward insert management A short, secure fastening system using Torx T8 keys and M2.5x6.5 Torx screws provides reliable insert retention and quick index changes. The construction minimises vibration and promotes even load distribution across the cutting edges, which supports improved surface finish and dimensional stability. With a 60 mm cutting length and a 150 mm overall length, the tool balances reach and stiffness for a wide range of milling setups without compromising clamping security. Productivity gains from smart insert use Equipped for WNMX 0603 indexable inserts, the cutter enables efficient utilisation of indexable tooling economics: inserts can be rotated or replaced independently of the tool body, reducing consumable cost per part and limiting machine downtime. The three-edge configuration offers a compromise between cutting efficiency and stable chip formation, helping to maintain throughput while protecting the toolholder and machine spindle from excessive loads. Practical considerations for workshop integration The tool’s moderate mass (approx. 0.578 kg) and standard shank diameter make it compatible with common toolholders, allowing seamless integration into existing toolsets. Compatibility with Korloy WNMX 0603 inserts ensures a broad choice of grades and geometries for adapting to varied workpiece needs. For customers assessing fitment, the cutter’s design supports straightforward handling and routine maintenance, while the clear specification of fastening hardware simplifies inventory of replacement screws and keys. For tailored advice or to secure this Teknik Makina indexable insert end mill through Metav Werkzeuge, contact our sales team for application-specific recommendations and supply reliability from Emmerich. Technical data SKU: S905-1TM Product type: Shaft milling cutter Manufacturer: Teknik Makina Core data Diameter: 25 mm Overall length: 150 mm Cutting length (shank): 60 mm Number of cutting edges: 3 Weight: 0.578 kg Special features Internal coolant (through-tool cooling) Compatible insert type: WNMX 0603 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x6.5 FAQ Which insert type fits this cutter? The cutter accepts WNMX 0603 indexable inserts; it is specified for use with Korloy inserts and the pocket geometry matches that standard. Is the tool suitable for through-coolant operation? Yes, the tool features internal coolant, supplying lubricant directly to the cutting zone to improve chip removal and reduce thermal strain. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter and the 150 mm overall length; the 25 mm shank matches common collet and hydraulic holders. How are the inserts secured and changed? Inserts are fastened with M2.5x6.5 Torx screws tightened using a T8 Torx key, enabling quick and reliable insert changes. Will this cutter integrate with existing Korloy insert inventories? Yes, the cutter is designed for WNMX 0603 Korloy inserts, allowing direct use of Korloy grades and geometries where that insert standard is already stocked. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust stability, internal coolant supply and simple indexable insert changes to keep machining cycles efficient and predictable; order the tool directly via Metav Werkzeuge or consult our specialists for tailored application advice. Shank milling cutter S764-2TM — 25 mm, internal coolant (Teknik Cutting Tools) The Shank milling cutter S764-2TM is a 25 mm-diameter tool engineered for indexable-insert milling operations, combining a long cutting reach with through-shank coolant for consistent performance in production environments 25 mm shank diameter Internal coolant supply Compatible with ANHX 1206 inserts T10 Torx fastening with M3.5x8.5 screw Stable clamping for consistent chip formation The robust 25 mm shank diameter and a total length of 200 mm provide a secure connection in standard holders, reducing run-out and vibration during operation. A 130 mm cutting length allows extended reach for shoulder and face milling tasks while maintaining rigidity. With two cutting edges, the tool balances material removal rate and chip evacuation, supporting predictable surface finish and repeatable cycle times in series production. Faster tool life and chip control with internal coolant The S764-2TM features internal coolant directed through the shank to the cutting zone, improving heat dissipation and tool life for indexable-insert systems. It accepts ANHX 1206 indexable inserts, compatible with inserts from Palbit, enabling rapid insert changes and lower stocking complexity. Retention is via a T10 Torx drive and M3.5x8.5 screw for secure fixing and quick servicing, which reduces downtime and simplifies maintenance routines. Built for machining centres and workshop integration Weighing 0.402 kg and designed as an indexable insert shank milling cutter, the S764-2TM integrates smoothly into CNC setups and manual milling stations where repeatability and modular tooling are required. The indexable system reduces the need for multiple full-profile cutters, offering a cost-effective approach to tool management and fast on-machine recovery. The concise feature set supports procurement decisions for production-focused workshops and specialist toolrooms. For reliable indexable milling with effective coolant delivery, order the Teknik Cutting Tools S764-2TM through Metav Werkzeuge or contact our consultants at Metav Werkzeuge for application-specific guidance from our Emmerich hub. Technical data Article number: S764-2TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: ANHX 1206 (Palbit) Label: 25mm Schaftfräser ANHX 1206 L200mm mit Innenkühlung Dimensions & weight Diameter: 25 mm Overall length: 200 mm Shank diameter: 25 mm Cutting length (shank): 130 mm Weight: 0.402 kg Cutting edges: 2 Special features Internal coolant T10 Torx key required Torx screw: M3.5x8.5 Compatible insert manufacturer: Palbit SKU: S764-2TM FAQ Which inserts fit this cutter? This cutter is designed for ANHX 1206 indexable inserts, compatible with inserts produced by Palbit for secure seating and optimal cutting geometry. Does the tool provide internal coolant? Yes, the S764-2TM has an internal coolant channel that supplies lubricant directly to the cutting zone for better heat control and prolonged insert life. What fastening hardware is required for insert changes? Insert clamping uses a T10 Torx drive and an M3.5x8.5 screw for reliable retention and straightforward replacement. Is the cutter suitable for CNC use? The shank design, indexable system and overall dimensions make the S764-2TM suitable for integration into CNC machining centres and production-oriented workshop setups. What are the key dimensions and weight? Key dimensions are 25 mm diameter, 200 mm overall length and 130 mm cutting length; the tool weight is 0.402 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant and compatibility with APKT 1003 inserts for reliable chip control and lower tooling costs; the robust 25 mm shank and 100 mm overall length deliver the rigidity required for repeatable results. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. Shank milling cutter S148-1TM — 25 mm shank, internal coolant (Teknik Makina) Shank milling cutter S148-1TM for APKT 1003 indexable inserts, designed for secure clamping and efficient cutting in general milling operations 25 mm shank diameter for rigidity Internal coolant for improved chip evacuation Compatible with APKT 1003 Korloy inserts T8 Torx and M2.5x5.5 screw specification Stable cutting performance with a compact footprint The 25 mm shank and 100 mm overall length provide a balance of rigidity and access to workpiece features, reducing chatter and improving surface finish when compared with less rigid holders. Designed for use with APKT 1003 indexable inserts from Korloy, the system enables fast insert replacement and consistent cutting geometry, which translates into predictable process windows and fewer machine interruptions. The moderate 35 mm cutting length keeps overhang low while allowing sufficient depth of cut for a wide range of light- to medium-duty milling tasks. Improved cooling and chip control for longer tool life Equipped with internal coolant, this cutter directs cutting fluid close to the cutting edge to support temperature control and effective chip evacuation. Better coolant delivery helps to reduce thermal wear on inserts and can extend insert life under continuous operation. The tool’s three-cutting-edge configuration (marked as 3 cutting edges) distributes cutting forces evenly and can enable smoother material removal in many milling scenarios. For maintenance and insert changes, the specification of T8 for the Torx key and M2.5x5.5 for the fixing screw ensures standardised, straightforward handling in the workshop. Practical handling, clear logistics and workshop benefits The compact design and standardised fastening details make the cutter easy to integrate into existing tool sets. The light nominal weight (approx. 0.365 kg) reduces toolholder imbalance compared with bulkier alternatives, while the indexable-insert approach reduces total tooling expense by allowing individual inserts to be changed instead of replacing entire end mills. Supplied as SKU S148-1TM, the cutter is suitable for businesses seeking an efficient, serviceable solution that aligns with common industrial inserts and toolholding practices. Contact Metav Werkzeuge for tailored advice on Teknik Makina shank milling cutters and to ensure optimal selection for internal-coolant milling setups; Metav Werkzeuge in Emmerich is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S148-1TM Product type: Shank milling cutter Model / designation: 25 mm shank, for APKT 1003 indexable inserts Manufacturer: Teknik Makina Dimensions & weight Diameter: 25 mm Shank diameter: 25 mm Overall length: 100 mm Cutting length (shank of cut): 35 mm Weight: 0.365 kg Number of cutting edges: 3 Special features Internal coolant Compatible with APKT 1003 indexable inserts Insert manufacturer compatibility: Korloy Torx key size: T8 Fixing screw: M2.5x5.5 FAQ What insert type fits this cutter? The cutter accepts APKT 1003 indexable inserts; it is specified for compatibility with inserts from Korloy. Is the cutter suitable for deep milling operations? The design with a 35 mm cutting length and a 25 mm shank is optimised for low- to medium-overhang applications; for deep milling, consider tools with longer cutting lengths and appropriate rigidity. How is cooling delivered to the cutting edge? Cooling is provided via internal coolant, which channels fluid close to the insert to support chip evacuation and temperature control. Which fastening tools are required for insert changes? Insert changes use a Torx interface; the cutter specifies a T8 Torx key and an M2.5x5.5 fixing screw. What is the SKU to order this cutter? The SKU for ordering is S148-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a 25 mm shank diameter and a 60 mm cutting length designed for secure clamping and extended reach with indexable inserts; the result is reduced set-up time and consistent milling performance. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance and reliable supply. Shank cutter — 25 mm shank, for LOGU 0303 indexable inserts (Teknik Makina) The Shank cutter is a robust milling body engineered for use with LOGU 0303 indexable inserts, offering a balance of rigidity and access for a wide range of industrial milling tasks. 25 mm shank diameter for secure clamping Compatible with LOGU 0303 indexable inserts 60 mm cutting length for deep material engagement Torx T8 screw system with M3x7 screws Greater rigidity for consistent machining results The design prioritises stability: a 25 mm shank diameter and a compact, well-balanced body reduce deflection under load, which improves dimensional accuracy and surface finish. With four cutting edges, the tool body supports continuous engagement and steady material removal, so cycle times become more predictable and scrap rates fall. This delivers a clear efficiency gain on production lines where repeatability is essential. Fast insert changes and low downtime Insert handling is simplified by the Torx T8 drive and M3x7 fastening screws, enabling quick, tool-centred replacement without the need for complex adapters. The cutter accepts LOGU 0303 indexable inserts and is Kyocera-compatible, which allows for flexible sourcing of inserts and grades. Reduced maintenance time and straightforward clamping procedures translate into higher machine availability and lower total operating costs for the workshop. Purposeful supply and trusted manufacture The tool is produced by Teknik Makina and supplied under SKU S680-1TM, providing a clear traceable procurement route. Delivered items are lightweight at approximately 0.579 kg, which eases handling during tool changes and inventory management. Metav Werkzeuge acts as a quality filter for the European market, offering dependable logistics and application advice from Emmerich; this supports a predictable supply chain for production-critical tooling. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina shank cutter into existing tool sets and to ensure prompt delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S680-1TM Label: 25mm Schaftfräser LOGU 0303 L150mm Manufacturer: Teknik Makina Core specifications Shank diameter: 25 mm Overall length: 150 mm Cutting length (shank-side): 60 mm Cutting edges: 4 Weight: 0.579 kg Compatibility & features Compatible inserts: LOGU 0303 Insert supplier compatibility: Kyocera Torque drive: Torx T8 Fastening screw: M3x7 Product type: Shank cutter FAQ Is this cutter compatible with LOGU 0303 inserts? Yes. The shank cutter accepts LOGU 0303 indexable inserts and is compatible with Kyocera-supplied grades for flexible tooling choices. What shank size is required for secure clamping? The tool features a 25 mm shank diameter, designed for rigid clamping in suitable tool holders. How long is the cutting portion of the tool? The cutter provides a 60 mm cutting length, allowing deeper engagements where required. Which screw and drive are used to secure inserts? Inserts are secured with an M3x7 screw driven by a Torx T8 key for rapid and reliable replacement. Who manufactures and supplies this tool? The tool is manufactured by Teknik Makina and supplied under SKU S680-1TM through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-efficiency milling with reliable insert compatibility: the combination of a 25 mm cutting diameter, 20 mm shank and compatibility with APKT 1003 indexable inserts delivers consistent surface finish and straightforward tool changes; order the milling cutter body directly via Metav Werkzeuge or consult the technical team for application advice. Schaftfräser S768TM – milling cutter body for APKT 1003 indexable inserts, Ø 25 mm, 20 mm shank (Teknik Makina) A Schaftfräser S768TM engineered as an indexable-insert milling cutter body for light-to-medium milling operations, offering stability and fast insert replacement for production and workshop settings Ø 25 mm cutting diameter 20 mm shank for secure clamping Holds APKT 1003 indexable inserts Four cutting edges for balanced cutting Precise compatibility that reduces setup time The S768TM is designed as an indexable-insert milling cutter body compatible with APKT 1003 inserts, enabling rapid tool resets and predictable results. Using standardised inserts from Palbit keeps tool inventory manageable and simplifies procurement. The holder accepts the common indexable geometry so that insert changes are completed with the supplied retention method, maintaining consistent cutting geometry and minimising cycle-to-cycle variation. This compatibility translates into fewer interruptions on the shop floor and more repeatable part quality. Stable clamping and predictable machining performance With a 20 mm shank and Ø 25 mm cutting diameter the tool body provides a rigid connection to the spindle for improved runout behaviour and dimensional consistency. The four cutting edges distribute cutting forces evenly, which reduces vibration and supports a steadier surface finish. For users unfamiliar with technical terms: reduced runout means the tool revolves with less wobble, which directly improves accuracy and prolongs insert life. These mechanical traits support efficient feeds and speeds in serial production where tool stability is decisive. Fast, serviceable insert changes to cut downtime Insert retention uses a Torx M2.5x5.5 screw secured with a T8 key, permitting quick replacements and low-maintenance operation. The retention design is serviceable with standard workshop tools, so routine maintenance does not require specialised fixtures. This design choice shortens non-productive time during insert swaps and reduces the risk of incorrect seating. Clear access to the screw head and a robust clamping interface ensure the insert is held securely under cutting loads while remaining straightforward to remove and index. Practical application guidance and sourcing The cutter body is suitable for general face and slot milling tasks where indexable inserts are preferred for economy and repeatability. Specifying the correct insert grade and geometry for the workpiece material remains essential; the S768TM affords the flexibility to use a range of APKT 1003 grades from recognised insert makers. For production planners and buyers, the combination of standard insert compatibility and a compact 25 mm diameter makes this body a practical choice where tool-change frequency and tooling standardisation are priorities. For technical clarification or machining recommendations, Metav Werkzeuge provides application support and stock information. For availability, application advice or to place an order for this Teknik Makina milling cutter body, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance Technical Data Article number: S768TM Manufacturer: Teknik Makina Product: milling cutter body for APKT 1003 indexable inserts Compatible inserts: Palbit APKT 1003 Dimensions & Key Figures Diameter: 25 mm Shank diameter: 20 mm Overall length: 150 mm Cutting edges: 4 Features & Mounting Torx screw: M2.5x5.5 Torx key size: T8 Suitable for APKT 1003 indexable inserts Compatible insert manufacturer: Palbit FAQ Which indexable inserts fit this cutter? The S768TM accepts APKT 1003 indexable inserts; compatibility with Palbit APKT 1003 grades is confirmed for standard operations. What are the key dimensions of the tool body? Shank diameter is 20 mm, cutting diameter 25 mm and overall length 150 mm, as specified for the S768TM. How many cutting edges does the cutter provide? The body is configured for four cutting edges, offering balanced load distribution and improved surface finish. How are inserts secured in the cutter body? Inserts are fastened with a Torx M2.5x5.5 screw that requires a T8 key for installation and removal. Is the cutter suitable for serial production? Yes; the combination of standard insert compatibility, secure shank clamping and quick insert changes makes the S768TM suitable for repetitive milling tasks in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid shank support, integrated internal coolant and direct compatibility with BDMT 1704 indexable inserts for consistent, repeatable results on the shop floor; order directly via Metav Werkzeuge or consult our specialists for application advice. Shaft milling cutter S579-1TM — 25 mm shank with internal coolant by Teknik Makina The Shaft milling cutter S579-1TM is a 25 mm shank tool designed for BDMT 1704 indexable inserts, optimised for stable pocketing and face milling with through‑tool coolant. 25 mm shank for rigid clamping Internal coolant optimises tool life Designed for BDMT 1704 indexable inserts 50 mm cutting length for deeper operations Stable clamping and consistent chip removal for efficient machining The robust 25 mm shank provides high torsional stiffness, reducing chatter and enabling consistent surface finishes in interrupted and continuous cuts. With 2 cutting edges, the tool balances material removal rate and load per insert, which supports predictable tool behaviour when programming roughing passes. The arrangement of the cutting geometry and the specified 50 mm cutting length allow controlled engagement in pocketing or shoulder operations while maintaining tool rigidity. Integrated cooling to extend insert life and improve process reliability The built‑in internal coolant directs fluid to the cutting zone to assist chip evacuation and reduce thermal load on the inserts. Lower cutting temperatures help preserve carbide edge integrity and reduce the frequency of index changes, delivering measurable improvements in tool life and process uptime. For operations where coolant delivery is key to quality, the through‑tool supply ensures fluid reaches the insert seat rather than relying solely on external flood cooling. Simple mounting and proven compatibility for quick tool changes Designed specifically for BDMT 1704 indexable inserts and compatible with Kyocera inserts, the cutter accepts standard clamping hardware for rapid insert replacement. Mounting is secured with a Torx T15 key and an M4x8.5 Torx screw, enabling repeatable axial location and secure fixation. The overall length of 150 mm and a mass of 0.548 kg make the tool well suited to a range of milling spindles while keeping centrifugal forces and balance considerations manageable for medium‑duty applications. Choose Teknik Makina’s S579-1TM when reliable coolant delivery and a rigid 25 mm shank are priorities — purchase through Metav Werkzeuge for assured supply from Emmerich and expert application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: S579-1TM Product type: Shaft milling cutter Label: 25mm Schaftfräser BDMT 1704 L150mm mit Innenkühlung Manufacturer: Teknik Makina Facts Shank diameter: 25 mm Overall length: 150 mm Cutting length (shank): 50 mm Number of cutting edges: 2 Weight: 0.548 kg eClass: 21180806 Special features Internal coolant For BDMT 1704 indexable inserts Compatible inserts manufacturer: Kyocera Torx key: T15 Torx screw: M4x8.5 FAQ Which insert geometry does the cutter accept? The cutter accepts BDMT 1704 style indexable inserts; insert seat and clamping are designed for that geometry. Is coolant delivered through the tool body? Yes, the tool features internal coolant to channel fluid directly to the cutting zone. What shank size is required for correct mounting? The tool has a 25 mm shank and requires a matching collet or holder for rigid clamping. How long is the cutting portion of the tool? The cutter provides a 50 mm cutting length, suitable for deeper pocketing and shoulder milling. What fastening hardware is used for the inserts? Insert retention uses a Torx T15 key and an M4x8.5 Torx screw for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable, coolant-fed milling system that reduces insert wear and improves cycle reliability; the robust 25 mm shank and internal coolant make the tool ideal for demanding indexable-insert operations. Order the cutter directly via Metav Werkzeuge or contact our consultants for specification advice. Shank milling cutter S520-1TM – 25 mm shank, internal coolant (Teknik Makina) The Shank milling cutter for R390 17 indexable inserts is designed for secure, coolant-through milling in industrial applications, combining a compact profile with reliable insert retention. 25 mm shank diameter Internal coolant supply Compatible with Sandvik R390 17 inserts Exceptional rigidity for stable machining A robust 25 mm shank provides the axial and radial stiffness required for repeatable results in milling cycles. The larger-diameter shank reduces vibration and improves surface finish when compared with thinner tooling, which translates into fewer rework operations and more consistent component tolerances. Designed for conveyors and CNC machines, this cutter supports operations where tool stability directly affects throughput and part quality. Coolant-through design for longer insert life The internal coolant feed directs cutting fluid straight to the cutting zone, improving chip evacuation and reducing thermal load on the insert. That direct supply helps maintain cutting-edge geometry for longer periods, extending the service life of the indexable tips and lowering tooling costs per component. In practice, coolant-through tooling reduces the risk of built-up edge and makes coolant delivery more effective under higher feed and speed settings. Proven compatibility and easy insert handling Built for use with Sandvik R390 17 indexable inserts, the tool offers the flexibility of a standard insert family while retaining the benefits of a dedicated cutter body. Insert clamping uses a Torx screw M3.5x8.5 secured with a T15 Torx key, enabling straightforward tip changes and quick replacement during set-up. This modularity minimises machine downtime and allows easy optimisation of insert grades for different materials and cutting conditions. Compact geometry for versatile applications With an overall length of 150 mm and a 55 mm cutting length, the cutter strikes a balance between reach and stiffness suitable for face and light shoulder milling tasks. The two cutting edges support efficient material removal on intermittent passes while maintaining good surface quality. At a practical mass of 0.536 kg, the tool is simple to handle during tool changes and compatible with common toolholders on milling spindles. Choose the Teknik Makina S520-1TM from Metav Werkzeuge for coolant-through, high-stability milling — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for technical advice and stock information Technical Data SKU: S520-1TM Label: 25mm Schaftfräser R390 17 L150mm mit Innenkühlung Manufacturer: Teknik Makina Eclass: 21180806 Core data Diameter: 25 mm Shank diameter: 25 mm Overall length: 150 mm Cutting length: 55 mm Weight: 0.536 kg Cutting edges: 2 Special features Internal coolant: yes Compatible inserts: Sandvik R390 17 Torx key: T15 Torx screw: M3.5x8.5 Product type: Shank milling cutter FAQ Which inserts fit this cutter? The S520-1TM is designed to accept R390 17 indexable inserts; use the corresponding Sandvik insert geometry for optimal seating and cutting performance. Does the cutter provide coolant-through capability? Yes — the cutter features internal coolant to deliver fluid directly to the cutting edge, improving chip control and insert life. How are the inserts secured and changed? Inserts are fastened with a Torx screw M3.5x8.5 using a T15 Torx key; replace inserts following the torque and seating recommendations of the insert manufacturer. For which milling tasks is this cutter intended? The tool’s combination of a 25 mm shank and a 55 mm cutting length makes it suitable for face milling, light shoulder work and general indexable-insert applications where stiffness and coolant delivery are priorities. What are the main benefits of choosing this model from Teknik Makina? The S520-1TM offers stable clamping, coolant-through performance and compatibility with a widely used insert series, which together reduce tooling costs and improve process reliability. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable solution that combines secure clamping and simple insert replacement: the 25 mm shank provides rigidity for stable machining, while compatibility with ANHX 1004–1206 inserts keeps tooling costs down. Order through Metav Werkzeuge or contact our consultants for application advice. Shank cutter for ANHX 1004-1206 indexable inserts (Teknik Makina) — 25 mm shank, 90° cutting angle Shank cutter designed to accept ANHX 1004 indexable inserts for reliable shoulder and face milling in production and workshop environments. 25 mm shank for secure clamping Compatible with ANHX 1004–1206 inserts 90° cutting angle for square shoulder milling Rigidity and consistent cutting results A stable toolholder interface is vital for repeatable machining. The 25 mm shank and substantial 180 mm overall length are engineered to deliver axial stability and reach without compromising rigidity. With a carefully balanced geometry and three cutting edges, this design reduces chatter and maintains tool life, which directly contributes to improved cycle-time consistency and fewer reworks in serial production environments. The result is measurable process reliability and lower scrap rates. Reduced downtime through indexable inserts Indexable tooling offers an immediate productivity advantage by separating cutting edge cost from the tool body. Compatibility with ANHX 1004–1206 indexable inserts allows quick replacement of worn edges without regrinding; replacement is secured with an M3x7 Torx screw tightened using a T8 Torx key, so insert changes are fast and require only basic workshop tools. This approach lowers total tooling expenditure and shortens maintenance intervals, translating into higher uptime on milling centres and smaller job shops alike. Precision for shoulder and face milling A true square shoulder is achieved through the 90° cutting angle, which provides clean, perpendicular faces and consistent corner geometry. That geometry is beneficial when tight form tolerances or mating surfaces are required. The cutter’s three-edge configuration balances material removal and surface finish, so operators can expect both efficient cutting and an improved surface without additional finishing passes in many applications. Workshop-ready dimensions and secure fastening Practical dimensions support flexible use across a range of setups: a 25 mm nominal diameter, 35 mm cutting length, and a compact weight of 0.099 kg keep the assembly agile and easy to index in existing tool systems. Designed for use with inserts from recognised manufacturers such as Palbit, the assembly uses standardised fixing hardware for dependable clamping. For production planners and workshop managers this means straightforward integration into established tool inventories and simplified spare-part management. Contact Metav Werkzeuge for tailored advice on the Teknik Makina shank cutter S784TM, compatible inserts and delivery options to ensure the right configuration for the intended application Technical data Article number: S784TM Manufacturer: Teknik Makina Core dimensions Shank diameter: 25 mm Cutting length: 35 mm Cutting angle: 90° Overall length: 180 mm Number of cutting edges: 3 Diameter: 25 mm Weight: 0.099 kg Special features Compatible with ANHX 1004–1206 indexable inserts Suitable insert manufacturer: Palbit Torx screw: M3x7 Torx key: T8 SKU: S784TM FAQ Which indexable inserts fit this cutter? The Teknik Makina shank cutter S784TM is designed for ANHX 1004–1206 indexable inserts; Palbit sizes within this range are compatible. How are inserts secured in place? Inserts are fixed with an M3x7 Torx screw, using a T8 Torx key for secure and repeatable clamping on the S784TM. What shank diameter and overall length does the tool require? The cutter features a 25 mm shank and an overall length of 180 mm, suitable for standard toolholders that accept a 25 mm dia. shank. How many cutting edges are fitted and what does that mean for finishing? The tool has three cutting edges, which balance material removal rate and surface finish, often reducing the need for secondary finishing operations. Is the cutter suitable for square shoulder milling? Yes — the 90° cutting angle is intended for clean square shoulders and precise face milling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of internal coolant and a compact 25 mm shank for improved insert life and repeatable machining results; this cutter body suits indexable APKT 1705 inserts and streamlines maintenance with standard Torx fastenings. Order the cutter directly via Metav Werkzeuge or consult our specialists for integration advice. Shank cutter S660-2TM by Teknik Makina — 25 mm shank, internal coolant The Shank cutter S660-2TM is a milling cutter body designed for APKT 1705 indexable inserts, ideal for workshop and light industrial milling where reliable coolant delivery and straightforward insert changes matter 25 mm shank diameter Internal coolant through shank Compatible with APKT 1705 inserts (Taegutec) 150 mm overall length, 60 mm cutting length Greater process reliability through internal coolant and rigid toolholding The central advantage of the S660-2TM is its internal coolant channel, which supplies cutting fluid directly to the cutting zone. This reduces thermal loading on the inserts and helps maintain a consistent cutting edge temperature, resulting in longer insert life and more uniform surface finish. For production environments that demand consistent cycle times, the targeted coolant delivery also lowers the risk of built-up edge and improves chip evacuation when using APKT 1705 indexable inserts from Taegutec. Compact shank design for improved stiffness and repeatability A 25 mm shank combined with a total length of 150 mm provides a compact, stiff assembly that reduces vibration and runout compared with longer, slimmer toolholders. The 60 mm cutting length offers a balance between reach and rigidity, making the cutter body suitable for slotting and light shoulder milling in setups where stability is essential. The modest mass (approx. 0.534 kg) keeps inertia low for faster acceleration on modern CNC machines and simpler jigs. Fast, secure insert changes that minimise downtime Insert retention is achieved with a standard M4x10 Torx screw and a T15 Torx key, enabling fast and repeatable clamping during routine maintenance. The cutter accepts APKT 1705 indexable inserts, allowing shops to use widely available triangular insert types and keep spares on hand. With two insert positions, replacement is straightforward and reassembly is immediate, helping to reduce non-productive time on the shop floor while maintaining process safety and repeatability. Discuss Teknik Makina's S660-2TM shank cutter with Metav Werkzeuge to confirm fitment for APKT 1705 inserts and to benefit from our stock availability and technical advice from Emmerich Technical data Article number / SKU: S660-2TM Label: 25mm Schaftfräser APKT 1705 L150mm mit Innenkühlung Manufacturer: Teknik Makina ECLASS: 21180806 Product type: Schaftfräser Numbers Diameter: 25 mm Overall length: 150 mm Cutting length: 60 mm Weight: 0.534 kg Number of cutting positions: 2 Fastening screw: M4x10 Torx key: T15 Special features Internal coolant through shank Compatible with APKT 1705 indexable inserts Insert supplier compatibility noted: Taegutec Compact design for rigid clamping Standard Torx fastening for quick insert changes FAQ What insert type fits this cutter? The S660-2TM cutter body is designed for APKT 1705 indexable inserts; it is compatible with APKT 1705 inserts supplied by Taegutec. Is internal coolant available on this tool? Yes — the cutter offers internal coolant delivered through the shank to the cutting zone for improved cooling and chip evacuation. What are the key dimensions for clamping and setup? Key dimensions are a 25 mm shank diameter, 150 mm overall length and 60 mm cutting length, which together support a rigid clamping arrangement for repeatable machining. Which fastening system is used for the inserts? Inserts are secured with an M4x10 Torx screw, compatible with a T15 Torx key for secure and quick changes. Who manufactures the cutter and what is the SKU? The tool is manufactured by Teknik Makina and sold under SKU S660-2TM for catalogue and reordering purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, a 25 mm shank and replaceable indexable inserts to keep machining stable and cost-effective; order direct via Metav Werkzeuge or consult our specialists for application-specific advice. Insert milling cutter S780-2TM by Teknik Makina — internal coolant, 25 mm shank Insert milling cutter S780-2TM designed for slotting and peripheral milling with XNKU 06T3 indexable inserts; suitable where rigid clamping and efficient chip evacuation are required. Internal coolant for stable chip evacuation 25 mm shank for rigid clamping Compatible with XNKU 06T3 inserts (Palbit) Reliable, modular cutting with replaceable inserts The indexable system provides a cost-effective way to maintain cutting performance: worn edges are exchanged rather than the entire tool, which reduces downtime and tooling expenditure. The cutter accepts XNKU 06T3 indexable inserts, a widely used geometry, allowing easy sourcing and fast replacement. This modular approach delivers consistent surface quality across batches while simplifying inventory management for production and maintenance teams. Improved cooling and process stability for longer tool life Integrated internal coolant channels direct cutting fluid to the cutting zone, improving chip evacuation and reducing thermal load on the inserts. As a result, machining runs exhibit more stable cutting forces and extended tool life, especially in interrupted cuts or harder workpieces. Combined with the 25 mm shank and robust body, the design helps maintain concentricity and reduce chatter, enabling predictable feed and speed settings in CNC operations. Practical handling and quick maintenance at the bench The cutter features 4 cutting edges, secured with Torx T8 screws (size M2.5x5.5), which streamlines insert changes and tightens to repeatable torque settings. With an overall length of 180 mm and 100 mm cutting length, the tool balances reach and rigidity for many workshop setups while weighing just 0.578 kg, easing handling and tool changes. The compatibility with Palbit inserts ensures straightforward procurement and interchangeability within existing tooling systems. Contact Metav Werkzeuge for a tailored recommendation on Teknik Makina insert milling cutters and to confirm the right insert grade for the intended application — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S780-2TM Product type: Insert milling cutter Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 180 mm Weight: 0.578 kg Shank diameter: 25 mm Cutting length on shank: 100 mm Number of cutting edges: 4 Special features Internal coolant For XNKU 06T3 indexable inserts Compatible insert supplier: Palbit Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this milling cutter? The insert milling cutter accepts XNKU 06T3 indexable inserts; it is specified to work with Palbit insert grades for broad material coverage. Does the tool provide through-coolant delivery? Yes, the S780-2TM cutter is equipped with internal coolant channels to direct fluid to the cutting edge and support effective chip evacuation. What are the key dimensions to check for fixturing? Check the 25 mm shank diameter, 180 mm overall length and 100 mm cutting length to ensure sufficient stick-out and secure clamping in the toolholder. How are inserts secured and replaced? Inserts are fastened with Torx T8 screws (M2.5x5.5); the arrangement allows quick, repeatable changes and straightforward maintenance. Is this cutter suitable for rigid machining setups? Yes, the combination of a 25 mm shank, modest overall length and balanced mass (approx. 0.578 kg) makes the cutter suitable for rigid clamping and stable CNC milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure clamping for ISCAR 3C inserts, a 20 mm shank for rigid mounting and a 180 mm overall length for extended reach — all combined to deliver consistent parting and grooving performance. Order the tool directly via Metav Werkzeuge or contact our consultants for application guidance. Grooving clamping holder K672TM — 20 mm shank, 180 mm overall length (Teknik Makina) The Grooving clamping holder K672TM is a parting and grooving holder designed for turning operations, offering compatibility with ISCAR 3C inserts and an ISO S20Q shank designation for reliable workshop integration 20 mm shank diameter for stable mounting 180 mm overall length for deep reach Compatible with ISCAR 3C inserts 3 mm cutting width, 35 mm blade height Consistent grooves through secure clamping and geometry The holder is engineered to provide secure clamping of ISO-style inserts, reducing micro-movement that can distort groove dimensions. With a 20 mm shank and a firm interface to ISO S20Q toolposts, the arrangement improves repeatability across batches and reduces rework. The specified 3 mm cutting width and 35 mm cutting height define the controlled cut profile and are suitable for standard parting and narrow-grooving operations, helping to maintain tolerance stacks and surface finish in serial production. Faster set-up and reliable tool changes for higher throughput A clear ISO designation and the alternate holder code 3C‑R DGN enable rapid identification and quicker tool changes at the machine, shortening non-productive time. The 180 mm overall length allows access into deeper work while the moderate mass (0.446 kg) keeps spindle load predictable, which supports steady cutting conditions. For production shops and maintenance teams, this translates into more predictable cycle times and simpler inventory management when matching holders to ISCAR 3C inserts. Robust compatibility across conventional turning tasks The design supports common grooving and parting applications on lathes and turning centres that accept ISO S20Q shanks, making the holder versatile for general workshop use. Compatibility with widely used 3C insert geometries ensures broad tooling availability and reduces the need for multiple specialised holders. The combination of standardised interfaces and straightforward geometry helps technicians achieve consistent cut quality with familiar insert styles. Contact Metav Werkzeuge today for tailored advice and procurement of the Teknik Cutting Tools grooving clamping holder K672TM — our Emmerich hub provides fast processing and application support. Technical data SKU: K672TM Manufacturer: Teknik Makina eClass: 21181005 Core data Shank diameter: 20 mm Overall length: 180 mm Cutting height: 35 mm Cutting width: 3 mm Diameter: 25 mm Weight: 0.446 kg Special features Compatible insert manufacturer: ISCAR Insert type: 3C ISO shank designation: S20Q Alternate holder designation: 3C-R DGN FAQ Which insert type is compatible with this holder? The holder accepts 3C insert formats and is supplied to work with ISCAR 3C geometries in parting and grooving tasks. What shank standard and diameter does the holder use? The tool has an ISO S20Q shank designation and a 20 mm shank diameter for secure mounting in standard toolposts. What are the cutting width and cutting height specifications? The holder provides a 3 mm cutting width and a 35 mm cutting height for controlled narrow-grooving and parting operations. Is the holder suitable for deeper grooving operations? With an 180 mm overall length the holder offers extended reach for deeper grooves while maintaining a compact mass of 0.446 kg for predictable dynamics. What machine types is this holder intended for? It is intended for lathes and CNC turning centres that accept ISO S20Q shanks and standard insert-style grooving tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, workshop-ready solution that combines a compact 25 mm cutting head with secure insert clamping and a Ø50 mm shank for improved rigidity; the result is reliable right-hand grooving and parting with fast setup and low vibration. Order via Metav Werkzeuge or consult our specialists for application advice and rapid supply. Stechklemmhalter – Grooving tool holder, right-hand, Ø50×150 mm (Teknik Makina) Stechklemmhalter is a purpose-built grooving and parting clamp holder for lathe operations, optimised for right-hand cutting and compatible with Korloy MGM 4 indexable inserts. Right-hand cutting for clean parting Compatible with Korloy MGM 4 inserts 25 mm cutting head for secure support Ø50 mm shank, 150 mm overall length Consistent parting and grooving for productive turning The holder delivers predictable results thanks to a rigid Ø50 mm shank and a 150 mm overall length, which reduce deflection during cut-off and narrow-grooving tasks. The comparatively compact geometry concentrates stiffness at the tool centre, improving surface finish and minimising chatter when using MGM 4 indexable inserts. For machinists seeking steady repeatability, the design offers a balance between accessibility to the workpiece and the support needed for stable metal removal. Fast setup and reliable insert clamping to save machine time Fitted for Korloy-compatible MGM 4 inserts, the clamping system simplifies tool changes and secures cutting edges with repeatable seating. The ISO 2525 designation and supplied bar reference 4C-R (50-60) make it straightforward to confirm compatibility with existing tool posts and boring bars. Quick insert replacement reduces downtime, while the positive clamping eliminates micro-movements that can cause premature edge wear—an advantage for batch production and mixed-series work. Optimised geometry for narrow grooves and controlled chip evacuation A 25 mm cutting head width and a 4 mm cutting width at the insert provide the profile required for tight-groove machining and precision parting. The tool accepts a maximum effective cutting diameter of 60 mm and allows a maximum grooving depth of 20 mm, enabling a range of internal and external operations without overextending the tool. The measured 45 mm cutting height and a 25 mm cutting engagement length support correct insert positioning and consistent chip formation, which helps maintain tool life and process stability. Workshop-grade build for everyday robustness Weighing approximately 0.704 kg, the holder is light enough for easy handling yet substantial enough to dampen vibration at the cutting zone. The construction suits general workshop demands where durability and straightforward maintenance are priorities. The part’s compatibility with widely available Korloy inserts supports a cost-effective consumable strategy, while the design reduces the need for frequent readjustment—benefits that translate into higher throughput on the shop floor. Contact Metav Werkzeuge for tailored application guidance and prompt supply from Emmerich — info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: D786TM Manufacturer: Teknik Cutting Tools Brand: Teknik Makina Facts Shank diameter: 50 mm Overall length: 150 mm Cutting head width: 25 mm Insert cutting width: 4 mm Maximum grooving depth: 20 mm Maximum cutting diameter: 60 mm Cutting height: 45 mm Cutting engagement length (shaft): 25 mm Weight: 0.704 kg Cutting direction: right-hand Special features Compatible with Korloy MGM 4 indexable inserts ISO designation: 2525 Clamping bar reference: 4C-R (50-60) Designed for grooving and parting applications FAQ Which insert type fits this holder? The holder accepts MGM 4 indexable inserts; it is compatible with Korloy MGM 4 geometries and insert seatings for secure clamping. Is the tool suitable for internal grooving as well as external parting? Yes, the grooving clamp holder is designed for both narrow internal grooves and external parting operations within its maximum grooving depth of 20 mm. What are the key dimensions to check for lathe compatibility? Check the Ø50 mm shank and 150 mm overall length, along with the ISO 2525 interface and the 4 mm insert cutting width for correct alignment with the tool post. Does the tool support left-hand cutting? This model is configured for right-hand cutting; mirror or left-hand variants should be selected where that cutting direction is required. How does the clamping design affect repeatability? The positive clamping and ISO-compliant seating provide repeatable insert positioning, reducing setup time and ensuring consistent cutting geometry across replacements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a 25 mm shank and 200 mm overall length to secure a rigid setup for consistent grooving and parting operations; combine this with 5C indexable insert compatibility for fast insert changes and steady productivity — order via Metav Werkzeuge or consult our specialists for application advice. Grooving clamp holder — compact parting/clamping tool, 25 mm shank, 200 mm length (Teknik Makina) Grooving clamp holder for precision parting and grooving on conventional and CNC lathes; designed for stable clamping of 5C indexable inserts 25 mm shank for secure toolpost mounting 200 mm overall length for extended reach Compatible with 5C indexable inserts 5 mm cutting width for fine grooving Achieve consistent cuts through a rigid mounting system A firm mounting is essential for reliable parting and grooving. The 25 mm shank with ISO designation S25R provides a compact, standardised interface that reduces play and vibration at the cutting point. Increased rigidity delivers a more constant kerf and prolongs insert life, which in turn reduces tool change frequency and downtime. For workshops that value process stability, the compact holder design contributes directly to repeatable results and predictable production flow. Quick insert changes and controlled cutting geometry Clamping compatibility with 5C inserts and the secondary designation 5C-R S229 ensures straightforward insert replacement and consistent cutting geometry. The tool accepts a 5 mm cutting width and offers a 50 mm cutting height, allowing precise control of groove depth and profile. The secure clamp mechanism facilitates quick insert change while maintaining axial position, making it suitable for short-cycle jobs where set-up speed and consistent component quality matter most. Reach and balance for everyday workshop use With a 200 mm overall length and an outside diameter of 33 mm, the holder balances accessibility and compactness for toolpost-mounted operations. The assembly weight of 0.77 kg supports a steady feel during manual handling and helps reduce resonance during cutting. This combination of reach and mass improves comfort when setting up tooling and contributes to safer, more predictable machining conditions in small-batch production or repair work. Practical fit for professional toolrooms and production shops Designed for routine parting and grooving tasks, the holder suits industrial and craft environments where reliable clamping and fast turnaround are priorities. The standardised shank and insert compatibility simplify inventory and spare-part management, enabling workshops to maintain productivity with fewer specialised components. The result is a pragmatic balance of precision and availability that supports efficient workshop operation. Contact Metav Werkzeuge today to discuss the Teknik Makina grooving clamp holder K636TM and secure the right tooling configuration for the application; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K636TM Manufacturer: Teknik Makina Designation: Grooving clamp holder Facts Shank diameter: 25 mm Overall length: 200 mm Cutting height: 50 mm Cutting width: 5 mm Outside diameter: 33 mm Weight: 0.77 kg Inserts: 5C Special features ISO shank designation S25R Secondary holder designation 5C-R S229 For parting and grooving operations Compatible with 5C indexable inserts FAQ Which insert type fits this holder? The holder accepts 5C indexable inserts; the unit references designation 5C and 5C‑R S229 for insert compatibility. What is the shank size and mounting standard? The shank is 25 mm with ISO designation S25R, making it compatible with standard toolpost and holder systems that accept a 25 mm shank. What are the cutting width and cutting height? The tool provides a 5 mm cutting width and a 50 mm cutting height, allowing fine grooving and controlled parting depths. Is this tool suitable for CNC and manual lathes? Yes; the holder’s standardised shank and compact design make it suitable for both CNC and conventional lathes where a 25 mm toolpost mount is used. How does the holder affect tool life and surface finish? The rigid clamping and standardised shank reduce vibration, which improves surface finish and extends insert life through more stable cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid 20 mm shank, compatibility with Korloy KGEVR‑KGMN 400 inserts and a compact 150 mm overall length to maintain precise grooving and parting operations. Order the parting and grooving clamp holder directly via Metav Werkzeuge or consult their specialists for application guidance. Parting and Grooving Clamp Holder K666TM — 20 mm shank, 4 mm cutting width (Teknik Makina) Parting and Grooving Clamp Holder K666TM is a compact clamping solution for indexable‑insert grooving and parting tasks on lathes and turning centres, designed to fit standard tool posts and tight setups. Rigid 20 mm shank for stable clamping Compatible with Korloy KGEVR‑KGMN 400 inserts 4 mm maximum cutting width for fine grooving Compact 150 mm overall length for confined workspaces Consistent cut quality through rigid clamping and correct geometry A holder with a 20 mm shank and sturdy body reduces vibration and runout, which directly improves surface finish and insert life. The defined cutting height of 45 mm establishes the correct tool centre relative to the workpiece when combined with common tool post setups. The result is repeatable groove profiles and fewer re‑cuts. By prioritising mechanical stability, process reliability is increased and cycle times can be kept consistent. Fast insert changes and clear compatibility with indexable geometry Designed for use with Korloy KGEVR‑KGMN 400 indexable inserts and the KGMN holder family designation, this clamp holder supports quick insert replacement and secure clamping of the cutting edge. The 4 mm cutting width suits narrow grooves and parting operations where chip control and edge strength matter. Clear compatibility with the ISO‑style shank designation S20M 4C simplifies procurement and ensures interchangeability across workshops that run Korloy inserts. Compact form factor that eases integration into workshop workflows With an overall length of 150 mm and a modest weight of 0.374 kg, the unit fits tightly between neighbouring tools and accessories on the turret or tool post. The moderate diameter of 25 mm and narrow profile reduce interference during multi‑tool setups, so changeover and indexing are more straightforward. This compact design supports lean machining layouts and helps maintain accessibility for coolant lines and work‑holding fixtures. Contact Metav Werkzeuge today for tailored application advice and to secure the Teknik Makina K666TM parting and grooving clamp holder for precision grooving work — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: K666TM Manufacturer: Teknik Makina Product name: Parting and grooving clamp holder SKU: K666TM Core dimensions Shank diameter: 20 mm Overall length: 150 mm Cutting height: 45 mm Cutting width: 4 mm Diameter: 25 mm Weight: 0.374 kg Compatibility & special features Compatible with Korloy inserts KGEVR‑KGMN 400 Shank designation ISO: S20M 4C Holder designation: KGMN Application focus: parting and grooving operations FAQ Which inserts fit this holder? The K666TM is specified for Korloy KGEVR‑KGMN 400 indexable inserts; compatibility is stated in the product data and matches the KGMN insert family geometry. What is the shank size and why does it matter? The holder has a 20 mm shank, which provides the rigidity needed for grooving and parting; a stiffer shank reduces vibration and improves insert life. How wide a groove can be cut with this holder? The clamp holder supports a maximum cutting width of 4 mm, suitable for narrow grooving and parting operations where chip control is critical. Is the overall length suitable for tight setups? Yes, with an overall length of 150 mm and a compact weight of 0.374 kg, the holder is designed to integrate into confined turret arrangements. What shank and holder designations are relevant for ordering? Refer to ISO shank designation S20M 4C, holder designation KGMN, and SKU K666TM when specifying the part for procurement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, ISO‑compatible boring solution that combines stable mounting, internal coolant, and straightforward insert compatibility for predictable machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar KA162TM — STFC for TCMT indexable inserts with internal coolant The Boring bar KA162TM is a right‑hand turning tool for external boring and facing operations, designed to accept TCMT 16T3 indexable inserts and optimised for secure clamping and coolant‑through performance. Right‑hand cutting orientation Internal coolant supply Compatible with TCMT 16T3 inserts Shank Ø 20 mm for stable mounting Consistent clamping for repeatable precision The design focusses on a rigid shank Ø 20 mm and a nominal diameter of 25 mm, delivering a stable toolholder interface that reduces vibration and runout. With the ISO A16Q STFCR designation, the bar matches established tooling fixtures and spindle interfaces, simplifying tool management in mixed fleets. The compact overall length 180 mm and a light mass of 0.44 kg make the assembly easy to handle while maintaining positional integrity during short‑reach boring tasks. Coolant‑through routing for improved tool life Integrated internal coolant channels provide direct flushing at the insert cutting edge, helping to control chip formation and lower cutting temperatures. The right‑hand cutting direction and a cutting angle of 90° support reliable chip breaking when paired with TCMT 16T3 carbide inserts, which can translate into longer insert life and fewer tool changes. These characteristics improve process stability and reduce unplanned downtime on repetitive production runs. Simple insert interface and predictable performance Compatibility with standard TCMT 16T3 indexable inserts reduces inventory complexity and enables fast insert changes. The tool’s cutting height 32 mm corresponds to common insert geometry, ensuring the correct cutting line without additional shims. For operations that require concise changeover routines, this bar supports a streamlined workflow and predictable dimensional results, enhancing throughput in job shop and light production environments. Integration into workshop workflows Suppliers and maintenance teams will value the straightforward specification: A16Q STFCR ISO designation, internal coolant, and a compact form factor. The combination of 25 mm diameter, 20 mm shank, and secure insert clamping offers a practical balance between rigidity and accessibility for handling and storage. For customers seeking a reliable indexable‑insert boring solution, this bar delivers consistent outcomes with minimal setup overhead. For technical suitability checks and order placement for the Teknik Makina KA162TM boring bar, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss specific machining scenarios and mounting requirements. Technical data Article number: KA162TM Manufacturer: Teknik Makina Designation: STFC for TCMT Indexable Inserts ISO designation: A16Q STFCR Data Diameter: 25 mm Overall length: 180 mm Shank diameter: 20 mm Cutting height: 32 mm Weight: 0.44 kg Cutting angle: 90° Cutting direction: right Special features Internal coolant Compatible with TCMT 16T3 indexable inserts Right‑hand orientation ISO A16Q STFCR compatible FAQ What inserts fit this boring bar? The boring bar KA162TM is compatible with TCMT 16T3 indexable inserts, allowing use of standard carbide grades and geometries suited to the application. Is coolant supplied through the tool? Yes, the KA162TM features internal coolant channels to deliver lubricant directly to the cutting zone, improving chip evacuation and tool life. What are the critical dimensions for mounting? Key mounting dimensions are shank Ø 20 mm, overall length 180 mm and tool diameter 25 mm; these values are relevant when selecting a compatible toolholder or turret pocket. Which cutting direction is supported by this bar? The tool is specified for right‑hand cutting, matching conventional lathe and turning centre setups where right‑hand tools are used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of secure clamping, precise geometry and integrated coolant for dependable internal turning operations; benefit from straightforward compatibility with TCMT inserts and order or request advice via Metav Werkzeuge for technical guidance. KA186TM Boring bar – STFC for TCMT indexable inserts, left-hand, internal coolant (Teknik Makina) The KA186TM boring bar is a left-hand tool optimised for internal turning with TCMT indexable inserts, designed for medium- to heavy-duty workshop applications. Left-hand cutting for internal turning Internal coolant for improved chip evacuation Compatible with TCMT 16T3 indexable inserts Secure performance for internal turning with minimal setup The design delivers a stable cutting platform for internal operations: the bar conforms to the A16Q STFCL ISO form and accepts standard TCMT 16T3 inserts, ensuring fast insert changes and predictable geometry. With a nominal body diameter of Ø25 mm and a shaft Ø20 mm, the tool provides rigidity where it matters, reducing chatter and enabling consistent bore finishes. The 90° cutting angle creates a controlled engagement typical for facing and internal profiles, so cycle times can be planned with repeatable results. These concrete technical attributes translate into fewer set-ups and more productive machining hours on the shop floor. Precision, compatibility and secure clamping for consistent results A cutting height of 32 mm combined with an overall length 180 mm balances access and stiffness for many internal turning tasks; the relatively low mass (0.44 kg) keeps centrifugal loads modest while allowing rotary tooling units to operate without added imbalance. The tool is supplied to suit a clamping interface around clamping size 16, which gives a secure seat for the indexable insert and helps maintain repeatability across multiple tool changes. Indexable insert systems reduce per-part cost by allowing quick replacement of cutting edges rather than whole tools, and the ISO designation removes uncertainty when matching holders and inserts from different suppliers. Integrated coolant and practical benefits for workshop efficiency Integrated internal coolant directs cutting fluid through the tool body to the cutting edge, improving chip evacuation and cooling the insert contact zone; this extends insert life and supports higher feed rates in many materials. The left-hand specification is advantageous where tool approach or machine spindle direction requires a reversed cutting orientation. For operations migrating from solid tools to indexable systems, this bar simplifies the transition: it pairs established insert geometry with a compact holder profile, so inventory and training demands remain small. Backed by a quality-focused supply chain, the combination of compatibility and coolant support helps workshops meet tighter tolerances with less rework. For reliable left-hand internal turning choose the Teknik Makina KA186TM boring bar and contact Metav Werkzeuge for ordering or tailored technical advice to ensure optimal tool selection and integration into current setups Technical data Article number: KA186TM Manufacturer: Teknik Makina Type: STFC for TCMT indexable inserts ISO designation: A16Q STFCL Facts Diameter: 25 mm Shaft diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Weight: 0.44 kg Cutting angle: 90° Special features Left-hand cutting direction Internal coolant Suitable for TCMT 16T3 inserts Clamping size 16 FAQ Which insert size fits this boring bar? The KA186TM is designed to accept TCMT 16T3 indexable inserts for straightforward edge replacement and economical running costs. Does the bar provide through-tool coolant? Yes, the tool features internal coolant, routed to the cutting zone to aid chip control and prolong insert life. Is the cutting direction left-hand or right-hand? This holder is specified for left-hand cutting, suitable for applications that require a reversed approach or spindle orientation. What are the main dimensions to consider for machine setup? Key dimensions are Ø25 mm body diameter, shaft Ø20 mm, cutting height 32 mm and an overall length of 180 mm, with a mass of 0.44 kg. What ISO designation ensures compatibility with other tooling? The holder follows the A16Q STFCL ISO form to simplify matching with standard clamping systems and accessories. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, ISO-designated tool that combines 20 mm shank stability with compatibility for TCMT 16T3 inserts to reduce changeover and secure consistent shoulder finishes; order directly via Metav Werkzeuge or request tailored advice from our consultants. Boring Bar K164TM — S20Q STFCR for TCMT Indexable Inserts, right-hand, 90° The Boring Bar K164TM is a right-hand external turning bar designed for use with TCMT 16T3 indexable inserts, offering a compact 180 mm length for confined setups and a robust 20 mm shank for reduced deflection 20 mm shank for high rigidity Compatible with TCMT 16T3 inserts 90° cutting angle for precise shoulder cuts 180 mm overall length, 25 mm diameter Stability and repeatable geometry for precision turning The bar is engineered to deliver repeatable results where dimensional control is critical. With a 20 mm shank and a 25 mm cutter diameter, the design reduces vibration and deflection during interrupted cuts, which translates into improved roundness and edge regularity. The S20Q STFCR ISO designation indicates compatibility with standard toolholders, while the 90° cutting angle supports accurate shoulder and face turning operations. For workshops converting between tool systems, the rigid construction lowers rework rates and increases first-pass yield. Fast set-up and reliable insert interface to shorten downtime Integration with TCMT 16T3 inserts ensures a familiar clamping geometry and simple indexability, which shortens insert change time and improves process uptime. The bar’s 32 mm cutting height matches the insert geometry to maintain correct cutting projection and chip flow. The right-hand cut orientation and the clamping designation (size 16) fit common turret and toolpost arrangements, allowing efficient adoption into existing turning cells. This combination supports lean production by reducing tool-change complexity and operator intervention. Durable, compact design for workshop flexibility Weighing 0.44 kg and at 180 mm overall length, this boring bar balances rigidity with manoeuvrability in restricted tool stations. The moderate mass contributes to stable cutting dynamics without unnecessary load on the turret, aiding automated and manual turning alike. The component’s compatibility with indexable carbide tips provides economical cutting edge renewals while preserving surface finish quality. In short production runs or mixed-batch work, the tool offers predictable performance and easy storage in modular tool racks. For machining tasks that demand rigidity and quick insert changes, contact Metav Werkzeuge for personalised advice on the Teknik Makina K164TM (S20Q STFCR) and guaranteed supply from our Emmerich distribution — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: K164TM Model / ISO: S20Q STFCR Product: Boring bar Brand: Teknik Makina Application: STFC for TCMT Indexable Inserts Key dimensions Shank diameter: 20 mm Cutting height: 32 mm Overall length: 180 mm Cutter diameter: 25 mm Weight: 0.44 kg Cutting direction: right Cutting angle: 90° Compatible inserts: TCMT 16T3 Clamping size: 16 Features Right-hand external turning bar ISO designation S20Q STFCR Designed for indexable TCMT 16T3 inserts 90° shoulder cutting capability Compact 180 mm length FAQ Which inserts fit this boring bar? The boring bar accepts TCMT 16T3 indexable inserts; the geometry and 32 mm cutting height are matched to that insert size for correct projection and chip control. Is the tool right- or left-hand? This bar is a right-hand cutter, specified for right-hand turning operations under the S20Q STFCR designation. What are the key dimensions to check for toolholder compatibility? Verify the 20 mm shank diameter, the 180 mm overall length and the clamping size 16 to ensure proper seating in the toolholder. How does the 90° cutting angle benefit shoulder machining? A 90° cutting angle produces square shoulders with minimal secondary finishing, reducing cycle time for shoulder-facing tasks. Can the bar be used in confined tool stations? Yes; the compact 180 mm length and moderate weight (0.44 kg) make it suitable for constrained turrets and small-lathe setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, reliable internal coolant and ISO‑matched design for consistent production results; order the boring bar directly via Metav Werkzeuge or consult our specialists for application guidance. Boring bar KA320TM — SVQC toolholder for VCMT indexable inserts, internal coolant (Teknik Makina) The Boring bar KA320TM is a compact SVQC toolholder engineered for VCMT 1103 indexable inserts, offering through‑tool coolant and an ISO A20Q SVQCL designation for precise, repeatable machining. Internal coolant supply via through-tool channel Accepts VCMT 1103 indexable inserts ISO A20Q SVQCL boring bar design Ø 25 mm, total length 180 mm, robust construction Better chip control and coolant delivery for steady cutting The integrated internal coolant channel supplies lubricant directly to the cutting edge, improving chip evacuation and reducing heat at the cutting zone. This targeted coolant feed helps maintain dimensional stability and extends insert life, which in turn lowers process variability and unplanned downtime. The design supports consistent surface finishes and reduced rework, making the toolholder an efficient component in medium‑ to high‑duty machining processes. Secure insert clamping and fast maintenance Designed for VCMT 1103 indexable inserts, the toolholder uses a secure clamping system actuated with a Torx M2.5x6.5 screw and a T8 key, enabling rapid insert changes and precise seating. The A20Q SVQCL form factor aligns with standard toolholder interfaces, ensuring predictable repeatability after each change. Reduced setup time and reliable insert retention translate directly into higher machine utilisation and more predictable cycle times. Compact dimensions that increase rigidity in confined setups With a Ø 25 mm shank and 180 mm overall length, the toolholder balances accessibility for internal bores with the rigidity required to resist deflection. The modest mass (1.752 kg) contributes to stable behaviour on the spindle while remaining manageable for fitting and handling. These dimensions make the tool suitable where space is limited but component tolerances demand steady tool performance. Practical choice to improve workshop throughput As a rational investment in a production environment, the SVQC toolholder reduces process variability through its through‑coolant capability and standardised ISO interface. The combination of secure insert clamping and direct coolant feed results in fewer interruptions for tool maintenance and better reproducibility from one batch to the next. For operations prioritising predictable cycle times and consistent part quality, this toolholder supports measurable efficiency gains. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Makina KA320TM boring bar with through‑coolant — Metav Werkzeuge in Emmerich offers fast technical guidance and reliable supply from stock Technical data Article number: KA320TM Manufacturer: Teknik Makina ISO designation: A20Q SVQCL ECLASS: 21180806 Facts Diameter: 25 mm Total length: 180 mm Weight: 1.752 kg Torx screw: M2.5 x 6.5 Torque key size: T8 Special features Internal coolant (through-tool) For VCMT 1103 indexable inserts SVQC style toolholder Secure insert clamping for repeatable seating FAQ What inserts fit this toolholder? The KA320TM is designed for VCMT 1103 indexable inserts and secures them with the specified Torx clamping hardware. How does internal coolant improve performance? Internal coolant on the KA320TM delivers fluid directly to the cutting edge, reducing temperature and aiding chip evacuation for improved insert life and surface quality. What are the main dimensions and weight of the toolholder? The toolholder has a Ø 25 mm shank, 180 mm total length and a weight of 1.752 kg, offering rigidity for many internal machining tasks. Which ISO designation applies to this toolholder? This SVQC toolholder corresponds to A20Q SVQCL, ensuring compatibility with standard toolholder interfaces. Is specialised tooling required to change inserts? Insert changes use a Torx M2.5 x 6.5 screw and a T8 key for straightforward and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise left-hand turning and reliable insert compatibility; the S20Q SVUBL combines a 20 mm shank with a 32 mm cutting height to deliver stable chip control in internal turning operations. Order the S20Q SVUBL boring bar directly via Metav Werkzeuge or ask our consultants if technical assistance is required. S20Q SVUBL boring bar (SVUB for VBMT indexable inserts) — Teknik Makina, left-hand cutting The S20Q SVUBL boring bar is engineered for left-hand internal turning with VBMT 1103 indexable inserts, offering a rigid 20 mm shank and an 180 mm overall length for use in CNC turning and finishing tasks. Shaft Ø 20 mm for high rigidity Compatible with VBMT 1103 inserts Left-hand cutting direction Overall length 180 mm for extended reach Stable internal turning through improved rigidity The boring bar is designed to reduce vibration and improve process stability; a 20 mm shank diameter provides a stiff connection to the toolholder that lowers deflection during cut. With a 32 mm cutting height and a 25 mm external diameter, the bar offers a balanced geometry that helps maintain consistent cutting forces and surface finish. Where concentricity and repeatability matter, the assembly is engineered so that the insert seat and clamp interface ensure predictable positioning, which supports tight tolerances on internal bores. Fast adaptation and predictable insert performance Compatibility with VBMT 1103 indexable inserts enables quick tool changes and predictable wear behaviour. The SVUB clamping concept secures the insert with repeatable seating, so index changes are done efficiently and tool downtime is minimised. The left-hand orientation is already integrated into the bar geometry, avoiding adapter workarounds for reverse-direction operations. This combination allows process planners to standardise on an insert family while retaining flexibility for finishing or semi-finishing operations. Practical integration into production workflows An overall length of 180 mm gives the bar reach for internal features without excessive overhang, while the specified 93° cutting angle supports stable engagement in typical bore applications. The unit weight of 0.7 kg contributes to manageable handling at setup and reduces inertia during rapid toolpath changes. Documentation and ISO designation S20Q SVUBL support traceability and tool management in maintenance records, and the simple clamping designation "11" assists in selecting compatible holders and fixtures for quick assembly. Contact Metav Werkzeuge for specification support or to arrange technical consultation on integrating the Teknik Cutting Tools S20Q SVUBL boring bar (SKU K284TM) into existing tool inventories — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: K284TM Manufacturer: Teknik Makina Product designation: S20Q SVUBL Description: SVUB for VBMT indexable inserts Facts Shaft diameter: 20 mm Cutting height: 32 mm Diameter: 25 mm Overall length: 180 mm Cutting angle: 93° Weight: 0.7 kg Special features Compatible inserts: VBMT 1103 Cutting direction: left-hand ISO designation: S20Q SVUBL Clamping holder designation: 11 For indexable inserts: SVUB FAQ Which inserts fit this boring bar? The S20Q SVUBL boring bar is specified for VBMT 1103 indexable inserts and the SVUB clamping style, ensuring correct seating and repeatable index changes. Is the cutting direction fixed or reversible? This bar is supplied for left-hand cutting orientation; reversal requires a different bar geometry or holder designed for right-hand cutting. What are the key dimensions for holder selection? Relevant dimensions include a 20 mm shank diameter, 180 mm overall length and a 25 mm external diameter; these values guide holder clearance and support choices. Can the bar be used for extended reach applications? The 180 mm overall length provides moderate reach for internal turning; longer overhangs will increase deflection and should be evaluated against process tolerances. What is the SKU for ordering and traceability? Order or reference the tool using SKU K284TM, which identifies the Teknik Makina S20Q SVUBL boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high compatibility, robust geometry and internal coolant for reliable turning operations; the KA302TM offers consistent chip control and stable clamping for indexable insert programmes. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar KA302TM — SVUC holder for VCMT indexable inserts, internal coolant — Teknik Makina The Boring bar KA302TM is a left-hand SVUC holder designed for external turning with VCMT 1103 indexable inserts, offering internal coolant feed and a compact 20 mm shank for tight set-ups 20 mm shank diameter 25 mm cutting diameter Internal coolant feed Compatible with VCMT 1103 inserts Left-hand cutting direction Stable, insert-compatible design for predictable cycle times The KA302TM combines an SVUC clamping concept with compatibility for VCMT 1103 indexable inserts to ensure repeatable cutting results. The proven insert family allows economical edge changes while maintaining process stability, which reduces unplanned downtime. Thanks to the left-hand orientation and a 93° cutting angle, chip flow and engagement are predictable in conventional external turning operations, enabling shorter cycle times and more consistent surface results. Compact geometry that supports rigidity and access With a 20 mm shank diameter, a 25 mm cutting diameter and a 32 mm cutting height, the toolholder delivers a balance between reach and stiffness for small- to medium-sized turning tasks. The overall length of 180 mm and a modest mass of 0.689 kg make the unit suitable for cross-slide and turret installations where tool overhang must be minimised. The ISO designation A20Q SVUCL indicates industry-standard form and helps to match toolholder interfaces accurately during toolset planning. Internal coolant and service advantages for prolonged tool life Integrated internal coolant directs lubricant to the cutting zone, lowering thermal load on the insert and aiding chip evacuation; the result is improved edge life and fewer index changes. The SVUC clamping gives secure insert retention while allowing straightforward replacement of VCMT inserts when wear occurs. For manufacturers seeking a pragmatic combination of productivity and maintenance ease, the holder provides an efficient foundation for serial turning tasks in a variety of shop-floor environments. Contact Metav Werkzeuge for specific cutting data and to confirm suitability of the KA302TM SVUC boring bar for current insert grades; reach us at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and supply from Emmerich Technical data Article number: KA302TM Manufacturer: Teknik Makina Product type: SVUC holder for indexable inserts Designation EN: SVUC for VCMT Indexable Inserts ISO designation: A20Q SVUCL Dimensions & weights Shank diameter: 20 mm Cutting diameter: 25 mm Cutting height: 32 mm Overall length: 180 mm Weight: 0.689 kg Features & compatibility Compatible inserts: VCMT 1103 Cutting direction: left-hand Cutting angle: 93° Internal coolant: yes Suitable for external turning with indexable inserts FAQ What insert type does this holder accept? The KA302TM accepts VCMT 1103 indexable inserts, designed for economical edge changes and flexible use in external turning. Is the coolant delivered through the tool? Yes, the KA302TM boring bar features internal coolant supply to the cutting zone to assist chip evacuation and extend insert life. What is the shank diameter and overall length? The tool has a 20 mm shank diameter and an overall length of 180 mm, providing a compact yet rigid configuration. Can the holder be used for right-hand turning? This particular variant is made for left-hand cutting direction; select the corresponding right-hand model for opposite feed direction. How does the ISO designation help in tool planning? The A20Q SVUCL ISO designation clarifies interface and geometry standards, simplifying integration into existing toolholders and assemblies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T-slot machining with a 25 mm cutting diameter and secure clamping on a 16 mm shank; compatibility with RD-- 0702 indexable inserts reduces tooling costs and maintenance time. Order the cutter directly via Metav Werkzeuge or consult our advisers for compatibility and supply. T-slot cutter TKC175TM — 25 mm, for RD-- 0702 indexable inserts (L120 mm) by Teknik Makina A T-slot cutter engineered for accurate T-slot milling using RD-- 0702 indexable inserts, suitable for fixture and machine table applications. 25 mm cutting diameter for standard T-slots Compatible with RD-- 0702 indexable inserts 16 mm shank for secure clamping, 120 mm length Reliable T-slot production with reduced tooling costs The 25 mm cutting diameter and compatibility with RD-- 0702 indexable inserts allow consistent slot geometry and repeatable results on machine tables and fixtures. Indexable inserts mean that only the insert is replaced when worn, lowering long-term tooling cost and simplifying logistics. The cutter’s three cutting edges distribute cutting forces evenly, which supports stable operation and reduces vibration when cutting into standard T-slot profiles. Quick insert changes and predictable uptime Insert replacement is facilitated by a Torx T8 key and M2.5x5.5 fastening screws, enabling fast servicing and minimal downtime. The tool’s 16 mm shank offers robust clamping for high-precision setups while the 20 mm effective cutting length provides sufficient engagement for most T-slot depths. Lightweight construction (approx. 0.188 kg) keeps spindle load predictable and contributes to smooth acceleration and deceleration during cycle changes. Suitable for workshop and production environments Designed for repetitive T-slot milling, this cutter performs well in both small-batch workshops and high-mix production environments where repeatability matters. The combination of a stable shank, indexed replaceable tips and a compact overall length of 120 mm supports efficient tool management and easy storage. The TKC175TM is a practical choice where consistent slot quality and fast serviceability are priorities. Choose the Teknik Cutting Tools 25 mm T-slot cutter for dependable T-slot machining — contact Metav Werkzeuge for technical matching and rapid supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TKC175TM Label: 25mm T-Nut Fräser RD-- 0702 L120mm Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 120 mm Shank diameter: 16 mm Cutting length: 20 mm Cutting edges: 3 Weight: 0.188 kg Special features for RD-- 0702 indexable inserts Torx screw M2.5x5.5 Torx key: T8 Product type: T-slot cutter FAQ Is this cutter compatible with RD-- 0702 inserts? Yes. The cutter TKC175TM is designed specifically for use with RD-- 0702 indexable inserts and delivers secure seating and consistent cutting geometry. What shank size is required for clamping? A 16 mm shank is provided; the tool requires a matching 16 mm holder or collet for secure clamping and optimal stability. How are the inserts fastened? Inserts are secured with M2.5x5.5 screws tightened using a Torx T8 key, which allows quick and repeatable insert changes on the TKC175TM. How many cutting edges does the tool have and what is the cutting length? The cutter features three cutting edges and an effective cutting length of 20 mm, suitable for standard T-slot depths. Which applications suit this tool best? The cutter is ideal for milling T-slots on machine tables and fixtures, offering repeatable slot geometry and efficient insert replacement for workshops and production lines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise T‑slot machining with a 25 mm cutting diameter and a compact 65 mm overall length, combined with a secure M10 thread for reliable clamping; order the tool directly via Metav Werkzeuge or consult our specialists if needed. T-slot cutter TKC260TM — 25 mm diameter, 65 mm overall length (Teknik Makina) T-slot cutter TKC260TM is a compact milling tool for producing accurate T‑slots and profiles in industrial milling operations. 25 mm diameter for standard T‑slots 21 mm shank for secure clamping Compatible with Korloy indexable inserts M10 thread for quick mounting Consistent slot geometry for repeatable results The TKC260TM is designed to deliver uniform T‑slot profiles thanks to its 25 mm cutter diameter and precisely formed cutting edges. With 2 cutting edges and a cutting edge height of 2 mm, the tool generates a clean slot profile while keeping cutting forces moderate. Compatibility with Korloy indexable inserts reduces tooling costs: inserts can be replaced without replacing the entire cutter body, which improves cost efficiency in repetitive production runs. Stable setup and reduced runout for better surface quality A 21 mm shank provides the necessary rigidity for milling operations, and the M10 thread secures the toolhead to the holder for consistent concentricity. The compact 65 mm overall length minimises unsupported overhang, lowering vibration and improving surface finish. The low mass (approx. 0.084 kg) contributes to responsive spindle behaviour and reduced bearing load during short, high‑precision cycles. Fast changeover and smooth integration into production Tool change and maintenance are simplified by the use of indexable inserts from Korloy, allowing quick exchange and minimal downtime. The model TKC260TM is suitable for workshops and small series production where rapid setup and tool economy matter. Clear insert compatibility reduces the need for special inventory and streamlines procurement and stocking decisions. Suited applications and who benefits most This T‑slot cutter meets the needs of toolrooms, CNC workshops and maintenance departments that require reliable slotting capability without complex setup. It is ideal where standardised T‑slots are used for fixturing and clamping systems, offering a compact, easy‑to‑service alternative to solid cutters. The combination of a rigid 21 mm shank, modest overhang and insert economy supports both prototyping and medium‑volume production. Contact Metav Werkzeuge for tailored advice on the Teknik Makina TKC260TM and fast delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKC260TM ECLASS: 21180605 Label: 25mm T‑slot cutter L65mm Facts Diameter: 25 mm Overall length: 65 mm Shank diameter: 21 mm Cutting edges: 2 Cutting edge height: 2 mm Thread: M10 Weight: 0.084 kg Special features Compatible with Korloy indexable inserts Product type: T‑slot cutter Manufacturer: Teknik Makina FAQ What insert type is compatible with this cutter? The TKC260TM is compatible with Korloy indexable inserts; using these approved inserts ensures correct geometry and predictable performance. How is the cutter secured to the holder? The cutter uses an M10 thread for attachment, giving a secure connection between cutter head and holder to maintain concentricity. Is the shank size standard for most toolholders? With a 21 mm shank, the cutter is compatible with toolholders designed for this shank diameter; confirmation of holder clamping dimensions is recommended. Can this cutter be used for both prototype and small batch production? Yes, the combination of a compact 65 mm overall length, insert changeability and a rigid shank makes it suitable for prototyping and medium‑volume production runs. What model number should be quoted when ordering? Please quote the SKU TKC260TM and the product type T‑slot cutter to ensure correct identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com