Gibt es einen Hahn und Kolb Online Shop?

Take advantage of precise T‑slot machining combined with reliable indexable‑insert compatibility and robust shank retention for uninterrupted production. Order the tool directly via Metav Werkzeuge or contact their specialists for technical advice and delivery from Emmerich. T-Nut Fräser — 25 mm, 4‑cut T‑slot cutter (Teknik Makina) The T-Nut Fräser is a purpose‑built T‑slot cutter for milling T‑grooves using indexable CCMT 0602 inserts, suitable for standard milling machines and powered toolholders. 25 mm cutting diameter, 4 flutes Compatible with CCMT 0602 inserts 20 mm shank diameter for secure clamping 100 mm overall length, 11 mm cutting height High‑precision T‑slot machining for consistent results This cutter delivers repeatable slot geometry through a stable flute configuration and a defined cutting height. The combination of a 25 mm diameter and 4 flutes ensures balanced chip evacuation and steady radial engagement, reducing vibration and runout. For workshops seeking reproducible T‑slot profiles, the tool provides a measurable improvement in surface consistency and setup reliability, supporting higher first‑pass yields and fewer reworks. Insert system and productivity benefits Designed for use with CCMT 0602 indexable inserts, the cutter reduces downtime by enabling fast insert changes without regrinding. The insert format offers established wear behaviour and a wide selection of grades, which translates into tailored solutions for typical industrial feeds and speeds. As a result, cycle times can be optimised while maintaining edge life, supporting a favourable cost‑per‑slot calculation in batch and series production. Secure mounting and cutting geometry that aids stability A 20 mm shank diameter with precisely machined interfaces improves clamping confidence in standard collets and chucks, lowering the risk of slippage under load. The tool provides a 32.5 mm cutting length on the shank and an 11 mm cutting height, enabling confident depth control for common T‑slot dimensions. This geometry simplifies process planning: a compact overall length of 100 mm helps reduce overhang, thereby improving dynamic rigidity during plunge and peripheral passes. Practical workshop advantages and handling With a mass of 1.232 kg, the cutter is substantial enough for stable cutting dynamics yet easy to handle during insert changes and setup. The tool accepts standard fastenings (Torx screw M2.5 x 3.5, Torx key T8) for secure insert retention, streamlining maintenance routines. Clear specification of shank and cutting dimensions supports CNC programme parameterisation and tool data entry in ERP or tool management systems, aiding a predictable production workflow. Contact Metav Werkzeuge today to discuss delivery options for the Teknik Makina T‑slot cutter TKC100TM or to request tailored machining advice directly from their Emmerich facility: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: TKC100TM Manufacturer: Teknik Makina Designation: T‑Nut Fräser Facts Cutting diameter: 25 mm Number of cutting edges: 4 Overall length: 100 mm Shank diameter: 20 mm Shank cutting length: 32.5 mm Cutting height: 11 mm Weight: 1.232 kg Special features Compatible inserts: CCMT 0602 Torx screw: M2.5 x 3.5 Torx key size: T8 Shank cutting diameter: 15 mm FAQ What type of inserts does the cutter use? The cutter is specified for CCMT 0602 indexable inserts, a common format that allows quick replacement and a wide selection of grades for different materials. Which machine setup is suitable for this T‑slot cutter? The tool is intended for standard milling machines and rigid toolholders where a 20 mm shank can be securely clamped; the compact 100 mm overall length helps minimise overhang. What are the key dimensions to enter in a tool manager? Relevant entries are cutting diameter 25 mm, overall length 100 mm, shank diameter 20 mm, and cutting height 11 mm for correct tool‑path calculation. How is insert retention handled on this cutter? Insert retention uses a Torx screw M2.5 x 3.5 tightened with a T8 key, providing stable clamping and easy maintenance without special tools. What is the product code for ordering or referencing? Refer to the SKU TKC100TM when ordering or requesting technical details from Teknik Makina or Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining a robust 25 mm shank with compatibility for SPMG 05 indexable inserts, this cutter offers repeatable T-slot geometry and straightforward insert changes. The four cutting edges and a 5 mm cutting height support steady material removal and predictable performance. Order the tool directly via Metav Werkzeuge or consult their technical advisors for application guidance. T-slot cutter TKC049TM — 25 mm Ø, compatible with SPMG 05 indexable inserts (Teknik Makina) A T-slot cutter designed for efficient production of T-slots using SPMG 05 indexable inserts, suited to industrial workshop and fixture machining 25 mm diameter T-slot cutter Compatible with SPMG 05 indexable inserts 100 mm overall length, 20 mm cutting shank Four cutting edges, 5 mm cutting height Robust design for consistent T-slot geometry The design centres on a 25 mm shank that provides rigidity and vibration resistance, which supports consistent groove form during repetitive operations. With a 20 mm cutting shank and an overall length of 100 mm, the assembly balances accessibility with stability, helping to maintain dimensional repeatability in serial production. The indexable concept, based on SPMG 05 indexable inserts, reduces non-productive time: inserts can be rotated or replaced quickly, so tool life management becomes predictable and machining cycles remain uninterrupted. Efficient cutting and predictable tool life Equipped with four cutting edges, the cutter delivers an even load distribution that reduces peak stresses and promotes smooth chip evacuation. The 5 mm cutting height is matched to commonly required T-slot profiles, enabling reliable material engagement without excessive axial load. Because the insert system is an established standard, compatible inserts from suppliers such as Taegutec are usable, which simplifies procurement and supports cost-effective maintenance. The balanced geometry and standardised fastenings contribute to lower downtime and improved throughput per production shift. Practical handling and straightforward maintenance Maintenance is simplified by the indexable design and standard fasteners: the insert is secured with an M2x4.2 Torx screw and serviced using a T6 Torx key, enabling quick, repeatable insert changes without specialised tools. The cutter’s moderate mass (approx. 0.412 kg) and standard shank diameter facilitate secure clamping in conventional toolholders while allowing safe handling during setup. The modular concept ensures that worn cutting edges are replaced rather than the whole tool, which supports sustainability and reduces consumable costs over time. Contact Metav Werkzeuge for availability, application advice and order handling for the Teknik Makina TKC049TM T-slot cutter — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: TKC049TM Label: 25mm T-Nut Fräser SPMG 05 L100mm Product type: T-slot cutter Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 100 mm Shank diameter: 25 mm Cutting shank length: 20 mm Cutting edges: 4 Cutting height: 5 mm Weight: 0.412 kg eClass: 21180605 Special features Compatible with SPMG 05 indexable inserts Compatible insert manufacturer: Taegutec Torx screw: M2x4.2 Torx key: T6 SKU: TKC049TM FAQ Which insert type fits this cutter? The cutter accepts SPMG 05 indexable inserts; compatible inserts from Taegutec can be used with the Teknik Makina TKC049TM. What is the shank diameter and overall length? The tool has a 25 mm shank diameter and an overall length of 100 mm. How many cutting edges does it have and what is the cutting height? The cutter is equipped with four cutting edges and a 5 mm cutting height. Which fastening system secures the inserts? Inserts are secured with an M2x4.2 Torx screw, tightened and loosened using a T6 Torx key for consistent clamping. For what tasks is this tool intended? The TKC049TM is intended for producing T-slots using the SPMG 05 insert system, suitable for fixture and table slot machining where indexable insert solutions are preferred Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact solution that combines internal coolant and direct compatibility with 22 IR indexable inserts to reduce cycle times and tool wear; order the component directly via Metav Werkzeuge or consult the technical team for application-specific advice. Threading Bar K327-6TM — Internal-coolant bar for inside threading with 22 IR indexable inserts (Teknik Makina) The Threading Bar K327-6TM is a dedicated internal threading tool designed for secure insert clamping and efficient coolant delivery during internal thread machining in lathes and turret systems. Internal coolant for stable chip evacuation Suited for 22 IR indexable inserts 25 mm shank diameter, 200 mm overall length Supplied with M4x15 Torx screw (T15) and TA063 clamp Consistent coolant flow for extended tool life The integrated internal coolant channel ensures a continuous supply of coolant directly to the cutting zone, which lowers cutting temperatures and reduces built-up edge formation. This targeted cooling improves tool life and process stability, allowing longer uninterrupted runs and fewer insert changes. For shops aiming for repeatable internal-thread quality, the coolant-fed design reduces the risk of thermal distortion and supports consistent thread geometry on serial parts. Fast, repeatable insert changes and secure clamping Compatibility with 22 IR indexable inserts and the included fastening hardware — M4x15 Torx screw (drive size T15) and TA063 clamping plate — streamlines service routines. The clamping concept provides a reliable seat for each insert, reducing setup time and ensuring correct insert orientation every time. The presence of a BSP10 gauge reference assists in preset checking and alignment, so changeovers and quality checks become quicker and more reproducible on the shop floor. Rigid dimensions for stable internal-threading performance A 25 mm shank diameter combined with an overall length of 200 mm delivers the necessary stiffness for internal threading in small-to-medium bores, helping to minimise vibration and deflection under cut. The bar’s geometry supports accurate thread form and surface finish while offering compatibility with common turret and chuck arrangements. Supplied by Teknik Makina, the component is intended for industrial turning environments where predictable performance and mechanical robustness are required. Contact Metav Werkzeuge for application advice and secure delivery from Emmerich — technical consultants are available to match the K327-6TM to specific machines and machining tasks Technical Data Article number: K327-6TM Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 200 mm Torx screw: M4x15 Torx key size: T15 Special features Internal coolant For 22 IR indexable inserts U plate: TA063 Pass gauge: BSP10 FAQ What insert type is compatible with this threading bar? Compatibility is specified for 22 IR indexable inserts; the bar is engineered to accept this insert family and the required clamping components. Does the bar provide internal coolant supply? Yes, the tool features internal coolant delivery to the cutting zone to support longer tool life and improved thread quality. Which fastening hardware is included for insert clamping? The K327-6TM is supplied with an M4x15 Torx screw (drive T15) and the TA063 clamping plate to ensure secure and repeatable insert seating. What are the key dimensions that affect rigidity? Key dimensions are a 25 mm shank diameter and 200 mm overall length; these contribute to reduced deflection during internal threading. Is the bar suitable for production turning centres? Yes, the bar’s design and coolant capability make it suitable for production environments where consistent internal-thread form and repeatability are required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant for reliable chip evacuation, a robust Ø 25 mm shank for deep internal threading and secure 16 IR indexable insert compatibility to maintain throughput and reduce downtime — order the tool directly via Metav Werkzeuge or request advice from our consultants. Threading boring bar K327-5TM — internal coolant, Ø 25 mm shank, for 16 IR indexable inserts (Teknik Cutting Tools) The Threading boring bar K327-5TM is engineered for internal thread machining using IR-style indexable inserts and is designed to deliver consistent clamping and coolant supply for stable production. Internal coolant for consistent chip control Ø 25 mm shank for deep internal threading Compatible with 16 IR indexable inserts Torx M3.5x11 fastening with T15 key Stable chip control and longer tool life with internal coolant The integrated internal coolant channel ensures directed fluid flow to the cutting zone, improving chip evacuation and reducing heat at the tool–insert interface. This results in a more consistent cutting temperature, which helps to extend insert life and preserve thread quality over longer production runs. For operations where repeatability matters, the coolant feed supports steady material removal rates and fewer stoppages for cleaning, contributing to uninterrupted machining cycles and improved overall throughput. Secure insert clamping for quick changeovers and process reliability A positive clamping concept is realised by the Torx M3.5x11 fastening screw, tightened with a T15 key, which provides a reliable and repeatable seat for the indexable insert. The use of standard 16 IR inserts enables quick replacement and reduces setup time, while the screw-and-seat arrangement minimises micro-movement under cutting loads. This design reduces the risk of chatter and maintains thread form accuracy, offering clear productivity benefits in batch production and mixed-series work. Design tailored for accessibility and exact positioning With a Ø 25 mm shank and 200 mm overall length, the tool is dimensioned to reach deeper internal threads while preserving stiffness. The supplied shim BSP10 and the U-plate TA060 facilitate exact seating and alignment of the insert carrier, allowing fine adjustment during mounting. These features combine to reduce set-up iterations and enable faster first-off conformity — a practical advantage when switching between workpieces or when re-establishing a fixture after maintenance. Recommended working context and handling guidance The bar is intended for internal thread production using IR indexable inserts; pairing it with appropriately specified inserts and a controlled coolant supply yields the best balance between surface finish and insertion life. Routine inspection of the Torx screw torque and periodic examination of the coolant channel are advised to sustain performance. For workshops integrating the tool into existing toolholders, confirm compatibility with the collar and seating dimensions to ensure secure clamping and concentricity during high-speed operation. For technical consultation or to source the K327-5TM directly, contact Metav Werkzeuge — Metav’s specialists can advise on insert selection, mounting details and supply logistics; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support Technical data Article number: K327-5TM Manufacturer: Teknik Makina Core measurements Diameter: 25 mm Overall length: 200 mm Design & features For inside thread for IR indexable inserts (16 IR) Internal coolant: yes Torx screw: M3.5x11 Torx key: T15 Shim: BSP10 U-plate: TA060 FAQ What insert type does this boring bar accept? The threading boring bar K327-5TM is designed for 16 IR indexable inserts, enabling straightforward insert swaps and consistent seating. Is there coolant through the tool? Yes — the K327-5TM features internal coolant to improve chip evacuation and stabilise cutting temperatures during internal thread machining. What are the key dimensions for setup? The bar has a Ø 25 mm shank and an overall length of 200 mm, suitable for deeper internal threading where rigidity and reach are required. How is the insert secured in the tool? Insert clamping is achieved with a Torx M3.5x11 screw tightened using a T15 key, providing a reliable and repeatable fixing for the indexable insert. Are there any alignment accessories supplied? The tool is delivered with a BSP10 shim and a TA060 U-plate to assist with accurate seating and alignment during installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a versatile thread milling solution that combines precise compatibility, robust mounting and a compact profile for uninterrupted production. The tool’s 25 mm cutting diameter and 20 mm shank ensure stable clamping and consistent thread geometry; order directly via Metav Werkzeuge or consult the Metav team for application support. Thread milling cutter DC210TM — 25 mm diameter, for S21/S30/S40 indexable inserts by Teknik Makina The Thread milling cutter DC210TM is a purpose-built cutting tool for thread milling in CNC applications, engineered to accept S21, S30 and S40 indexable inserts and to perform reliably in serial production. Compatible with S21, S30 and S40 inserts 25 mm cutting diameter for stable thread profiles 20 mm shank for secure clamping Torx fastening with M4x10 screw, key T15 Consistent thread quality through controlled tool geometry The DC210TM focuses on producing repeatable thread forms by pairing a well-dimensioned cutter body with standard indexable inserts (S21/S30/S40). Fixed geometric relationships between the cutter body and the inserts reduce setup variability and make the process less dependent on operator skill. The 25 mm diameter delivers adequate stiffness for routine metric and imperial thread profiles, while the 20 mm shank aligns with common toolholders for rigid clamping. For engineers and workshop managers this translates into fewer rejects, predictable cycle times and demonstrable process capability. Minimise tooling complexity and stock levels By accepting three common insert classes, the tool reduces the need to stock multiple dedicated cutters. The compatibility with S21, S30 and S40 inserts allows a single cutter body to cover a broad application range; spare inserts can be shared across cutters, simplifying purchasing and inventory control. In practical terms this lowers the capital tied up in tooling and shortens downtime for insert changes, delivering a fast return on investment through reduced logistics and quicker tool replacement. Robust fastening and straightforward maintenance for uptime Fastening is handled via a Torx M4x10 screw, tightened with a T15 key, which provides a positive, repeatable clamping force for the inserts. The use of a standard Torx interface simplifies routine servicing and reduces the chance of incorrect torque. With a 125 mm overall length, the cutter balances reach and rigidity, limiting deflection in deep or interrupted cuts. Regular inspection of clamping screws and inserts ensures continued cutting performance and long service life; replaced inserts restore cutting geometry without the need for full-tool changeover. Practical guidance for integration and machining strategy Integrating the cutter into an existing toolset is typically straightforward: select a toolholder that accepts a 20 mm shank, verify insert geometry and size, and confirm the machine’s spindle clearance for a 125 mm overall length. For thread milling, choose axial and radial passes that match the insert capability and material to be machined; the cutter is suited to conventional and climb milling strategies when parameters are adjusted accordingly. If additional cutting data or cycle-time estimates are required, Metav Werkzeuge can supply further documentation and application advice to ensure optimal performance. Contact Metav Werkzeuge today for personalised tooling recommendations for the DC210TM thread milling cutter, or request detailed application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: DC210TM Manufacturer: Teknik Makina SKU: DC210TM Measurements Cutting diameter: 25 mm Shank diameter: 20 mm Overall length: 125 mm Features / Special characteristics Compatible inserts: S21 / S30 / S40 Torx screw: M4x10 Torx key size: T15 eClass: 21180805 ETIM: EC011860 FAQ What insert types are compatible with this cutter? The DC210TM thread milling cutter accepts S21, S30 and S40 indexable inserts, enabling a wide range of thread forms with compatible insert geometries. What are the key mounting dimensions for toolholder selection? Use a toolholder that accepts a 20 mm shank and check spindle clearance for the 125 mm overall length when installing the DC210TM. How is the insert secured in the cutter? Inserts are clamped with a Torx M4x10 screw; a T15 key is specified for correct torque and repeatable clamping. Can the cutter be used for both small-batch and serial production? Yes, the cutter body combined with indexable inserts is suitable for flexible use in both prototype work and series production, offering quick insert replacement and consistent thread quality. Who manufactures the tool and who is responsible for supply? The tool is produced by Teknik Cutting Tools and supplied via Metav Werkzeuge; see manufacturer details below for full contact information. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the precise 25 mm diameter, integrated internal coolant and secure M12 screw-in mounting for reliable, repeatable milling results — order the screw-in cutter directly via Metav Werkzeuge or ask our consultants if needed Screw-in cutter VT292TM for RPMT 10T3, 25 mm, with internal coolant — Teknik Makina The Screw-in cutter VT292TM is a compact milling head designed for use with RPMT 10T3 indexable inserts, delivering controlled chip evacuation and consistent surface finish for small- to medium-batch production 25 mm cutter diameter Internal coolant for chip control M12 screw-in mounting Compatible with RPMT 10T3 inserts Torx T15 screw for fast insert change Process-stable performance for indexable-insert milling The VT292TM is engineered for predictable cutting results when paired with RPMT 10T3 indexable inserts. With a 25 mm diameter and two cutting edges, the tool achieves balanced cutting forces that reduce vibration and improve dimensional accuracy. Using industry-standard inserts from Korloy ensures repeatable edge geometry and simple stock procurement. This configuration suits precision finishing and light roughing operations where tool stability and consistent tolerances are priorities, translating into fewer rejects and more efficient production runs. Effective coolant routing and robust mounting to cut cycle time Through-tool delivery via the internal coolant channel improves chip evacuation at the cutting zone, helping to maintain edge life and surface integrity under continuous operation. The M12 screw-in interface provides a rigid, concentric junction to the toolholder and a clear repeatability advantage compared with screwless alternatives. Combined with a 24 mm thread engagement and a compact overall length of 59 mm, the design reduces overhang and increases process security on both manual and CNC milling centres. The net result is shorter cycle times and lower tool-change frequency. Serviceability and workshop integration for dependable uptime Maintenance and insert replacement are straightforward: inserts are secured with a Torx T15 drive and an M3.5×8.5 screw, enabling fast exchange and minimal downtime. The cutter’s modest mass (0.145 kg) and modest footprint make it easy to store and handle in busy toolrooms. As a partner for precision operations, Metav combines a broad product range with supply reliability from Emmerich; customers benefit from consolidated sourcing and long-term availability. For technical clarifications or application-specific data, Metav’s advisers can provide machining recommendations and setup guidance. Choose Teknik Makina’s screw-in cutter VT292TM for process-stable indexable-insert milling and contact Metav Werkzeuge for tailored delivery and application advice from Emmerich Technical data SKU: VT292TM Brand: Teknik Makina Product type: Screw-in cutter Compatible inserts: RPMT 10T3 Insert manufacturer: Korloy Internal coolant: Yes Facts Diameter: 25 mm Overall length: 59 mm Thread: M12 Thread height: 24 mm Cutting edges: 2 Cutting-edge height: 35 mm Weight: 0.145 kg Special features Through-tool coolant Torx screw M3,5×8,5 for insert fastening Torx key: T15 Designed for indexable-insert finishing and light roughing Category: Screw-in cutter FAQ Which inserts fit this cutter? The VT292TM is designed for RPMT 10T3 indexable inserts, compatible with Korloy-manufactured RPMT grades for a wide range of materials. Is coolant-through capability available? Yes — the cutter features internal coolant, enabling improved chip clearance and longer insert life at the cutting edge. What is the mounting thread and engagement length? The tool uses an M12 screw-in mount with a 24 mm thread engagement for secure, concentric seating. How many cutting edges does it have and what is their purpose? The unit has 2 cutting edges, optimised for balanced cutting action, good surface finish and efficient chip removal in finishing passes. Which fastener and key are needed for insert changes? Inserts are secured with an M3.5×8.5 Torx screw, tightened with a T15 Torx key for quick and reliable replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of secure, coolant-fed clamping and standardised mounting components for reliable machining and reduced setup time; order the clamp holder directly via Metav Werkzeuge or consult the sales team for application advice. Clamp holder AP604TM — Toolholder with internal coolant for 16 ER indexable inserts (Teknik Makina) Clamp holder AP604TM is designed for turning and milling operations where controlled coolant delivery and consistent insert clamping are required Clamp holder for 16 ER indexable inserts Integrated internal coolant for chip evacuation Standard Torx fixing M3.5x11 and T15 key Compact 25 x 25 mm body with 150 mm overall length Consistent clamping and coolant management for longer tool life The AP604TM provides secure clamping for 16 ER indexable inserts while integrating a central internal coolant channel to channel lubricant directly to the cutting edge. This combination reduces flank wear and thermal shock, which leads to longer tool life and fewer unplanned changeovers. The unit accepts the standard U-plate TA061 and shim TA060, and is fastened with the supplied M3.5x11 Torx screw using a T15 key, enabling consistent torque and repeatable seating for every insert change. Compact design and straightforward installation to speed setup With a compact 25 x 25 mm cross-section and an overall length of 150 mm, the holder fits common turret and toolpost arrangements while keeping the cutting point stable. The reduced profile helps to minimise overhang and vibration, improving surface finish and dimensional repeatability. The modular interface with the TA061 mounting plate simplifies tool assembly and replacement, lowering setup time and supporting higher machine utilisation in both small-batch and continuous production environments. Measurable process benefits for production reliability Built for workshop and light industrial use, the holder supports process stability through defined mechanical fixation and direct coolant feed, which together cut tool-change frequency and scrap risk. The design translates into tangible efficiency gains: reduced downtime, more predictable cycle times and improved first-pass quality. Supplied components conform to industry conventions, ensuring that retrofitting or spares procurement remains straightforward for maintenance teams and tooling managers. For application-specific advice or to source the Teknik Makina clamp holder with Metav Werkzeuge as supplier, contact Metav Werkzeuge for tailored recommendations and availability. Technical Data Article number: AP604TM Brand: Teknik Makina Type: Clamp holder for ER indexable inserts SKU: AP604TM Facts Overall length: 150 mm Body dimensions: 25 x 25 mm Suitable for: 16 ER inserts Special features Internal coolant channel Torx screw: M3,5x11 Torx key: T15 U-plate: TA061 Shim/pass plate: TA060 Designed for ER indexable inserts FAQ What insert type does the holder accept? The clamp holder accepts 16 ER indexable inserts and is configured to clamp them securely while providing an internal coolant feed. Is coolant delivery integrated in the design? Yes, the toolholder features an internal coolant channel that directs fluid to the cutting zone to aid chip control and cooling. Which fastening components are specified for assembly? Assembly uses a Torx screw M3.5x11 tightened with a T15 key and mounts to the TA061 U-plate with the TA060 shim for correct positioning. Can this holder be used in compact turrets or small toolposts? The compact 25 x 25 mm body and 150 mm overall length make it suitable for many turret and toolpost arrangements where reduced overhang is preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise parting performance and a secure 20 mm shank for consistent production results; the combination of a narrow 2 mm cutting width and a 40 mm cutting height supports fine-grooving tasks with stable clamping. Order the holder through Metav Werkzeuge or consult our specialists for application-specific advice. Grooving Clamp Holder K642TM — 20 mm shank, 2 mm cutting width (Teknik Makina) Grooving Clamp Holder K642TM is a lathe-mounted clamp holder engineered for accurate parting and grooving with 2C indexable inserts, offering a compact 180 mm overall length for extended reach in turning operations Parting toolholder for 2C inserts 20 mm shank for secure mounting 2 mm cutting width for narrow grooves 180 mm overall length for extended reach Reliable rigidity for repeatable grooving quality The holder delivers stability through a robust clamping interface and a 20 mm shank, which together reduce vibration during cutting and promote repeatable results. With a 2 mm cutting width specified for narrow-groove operations and a 40 mm cutting height, the design supports controlled chip formation and consistent edge engagement. The clamping concept is aimed at maintaining insert position under varying cutting loads; this reduces rework and improves process uptime in production environments where consistent groove dimensions are required. Optimised for lathe setups and straightforward installation Designed for common lathe toolposts, the toolholder accepts inserts in the 2C form factor and mates with S20Q-type shank arrangements, simplifying tool setup and inventory management. The 180 mm overall length provides additional reach without compromising stiffness, so operators benefit from both accessibility and control. Clear nominal dimensions and a compact mass of 0.444 kg mean balancing and tool-change routines remain efficient, while the simple clamp mechanism reduces setup time compared with more complex holders. Practical compatibility and machining considerations Material compatibility depends on the chosen insert grade and cutting parameters; the holder itself is specified for use with 2C inserts, enabling selection of carbide or coated grades according to application needs. The combination of cutting height and insert geometry allows stable engagement for slim grooves, and the secure clamping reduces the risk of insert shift during interrupted cuts. For operations requiring repeatable groove widths and tight dimensional tolerances, the holder’s geometry supports predictable machining results when paired with appropriate insert technology. When this holder is the preferred choice Choose this toolholder where narrow-parting or precision grooving is needed across short to medium production runs. Its compact design and standard shank format simplify integration into existing tool inventories, while the secure clamp and nominal dimensions reduce the setup variables that can affect process consistency. The holder is particularly suitable for workshops and small-batch production that require a reliable, easy-to-handle solution for parting and grooving tasks. For application guidance and to obtain Teknik Makina grooving clamp holders directly from our European distribution hub, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and order coordination Technical data Article number: K642TM Manufacturer: Teknik Makina Designation: Grooving clamp holder Core specifications Shank diameter: 20 mm Cutting height: 40 mm Cutting width: 2 mm Overall length: 180 mm Diameter: 26 mm Weight: 0.444 kg Suitable for inserts: 2C Special features Compatible with S20Q shank type Insert form: 2C For grooving/parting operations Precision clamping mechanism FAQ Which insert shape fits this holder? The holder is designed for 2C indexable inserts and accepts the standard insert geometry for narrow grooving and parting tasks. What is the shank diameter and why does it matter? The shank diameter is 20 mm; this dimension ensures a secure mount in compatible toolposts and contributes to reduced vibration during cutting. What groove width can be produced with this holder? The holder specifies a 2 mm cutting width, making it suitable for narrow groove and parting operations where slim kerf performance is required. Is this holder suitable for long overhangs? With an overall length of 180 mm, the holder offers additional reach; however, stiffness decreases with overhang, so keep the setup as rigid as possible for high-precision work. How heavy is the toolholder and how does weight affect handling? The mass is 0.444 kg, which supports easy handling during tool changes while maintaining enough mass to dampen minor vibrations in typical lathe setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of ISCAR-compatible indexable insert support, rigid S20Q shank and compact 180 mm length for reliable parting operations; order via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Parting clamp holder K706TM – compact, rigid holder for 4C indexable inserts by Teknik Cutting Tools Parting clamp holder K706TM is a compact clamping solution designed for precise parting and grooving tasks in workshop and production environments; fits 4C indexable inserts and is compatible with ISCAR systems Clamp for 4C indexable inserts Shank Ø 20 mm, S20Q designation Cutting width 4 mm, cutting height 35 mm Overall length 180 mm, weight 0.463 kg Improved process reliability through stiff design and defined geometry The holder delivers a stiff, vibration-resistant interface between machine and cutting edge, engineered to keep the insert stable during parting operations. With a shank diameter of 20 mm and an S20Q shank designation, the toolholder reduces deflection and helps to preserve cutting-edge life. For machine shops where repeatability matters, the result is consistent parting quality and fewer rejects per batch, which supports predictable production throughput. Precise cutting parameters for narrow grooving and parting Designed around a cutting width of 4 mm and a cutting height of 35 mm, this clamp holder is suited to fine parting and narrow grooving tasks where clearance and accuracy are critical. The overall length of 180 mm provides access without excessive overhang, improving stability. Compatibility with 4C indexable inserts from established manufacturers such as ISCAR ensures readily available cutting geometries for a range of steels and non-ferrous materials, enabling fast tool changes and reduced downtime. Practical compatibility and easy integration for workshop use The clamp holder is specified for use with the 4C-R GRP clamp designation and pairs with standard S20Q shafts, which simplifies tool inventory and setup. Its compact mass (approx. 0.463 kg) keeps tool balance manageable on small and medium lathes. The clear designation of interface types and insert family supports quick selection for tooling lists and makes the component straightforward to integrate into existing turning and parting tool assemblies. For tailored advice on integrating the K706TM into production workflows or to request cutting data and availability, contact Metav Werkzeuge for expert consultation and fast, transparent supply from Emmerich Technical data Article number: K706TM Manufacturer: Teknik Makina Shank diameter: 20 mm Cutting height: 35 mm Cutting width: 4 mm Diameter: 26 mm Overall length: 180 mm Weight: 0.463 kg Fits indexable inserts: 4C Compatible insert maker: ISCAR Shank designation: S20Q Clamp holder designation: 4C-R GRP FAQ What insert type does this holder accept? This parting clamp holder accepts 4C indexable inserts; the K706TM is prepared for the 4C insert family and secures them with the 4C-R GRP clamping arrangement. Is the holder compatible with ISCAR inserts? Yes, the K706TM is ISCAR-compatible as stated in the product specification, allowing the use of widely available ISCAR 4C inserts. What are the key dimensions to check for machine compatibility? Check the shank diameter (20 mm), the overall length (180 mm) and the toolpost/dedicated holder diameter (26 mm) to ensure correct fit in the intended lathe or turret. Can this holder be used for narrow grooving applications? The specified cutting width of 4 mm and cutting height of 35 mm make the holder suitable for narrow grooving and fine parting where small kerf width is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of durable construction, insert compatibility and precise dimensions to maintain steady production cycles; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Indexable drill body U163TM – Ø 26.5 mm, 78 mm cutting length (Teknik Makina) The Indexable drill body U163TM is engineered for industrial metalworking where reliable holemaking and rapid insert changes are required, suited to batch production and maintenance operations. Robust indexable-drill body design Compatible with Korloy WCM-0503 inserts Ø 26.5 mm drilling diameter Lightweight at 0.497 kg Consistent hole quality for repeatable production The U163TM offers a dependable tool platform for demanding drilling tasks. With a Ø 26.5 mm cutting diameter and a 78 mm cutting length, the tool enables deep-hole passes with controlled chip evacuation, reducing cycle times and the need for multiple operations. Designed for indexable tooling, the body accepts the Korloy WCM-0503 insert format, which supports quick replacement and minimal downtime. This combination delivers measurable efficiency gains in repetitive manufacturing and helps maintain process stability on series parts. Practical mounting and handling to speed up set-up A precision 25 mm shank and a dedicated shank length of 56 mm ensure secure clamping in common toolholders, so the drill body stays concentric under load and contributes to improved surface finish and roundness. The component’s modest mass of 0.497 kg keeps handling straightforward during tool changes and reduces spindle imbalance risk. Fewer balancing steps and reliable clamping mean faster set-up and less machine idle time, which translates into better utilisation of machining assets. Built for compatibility and straightforward maintenance The design centres on replaceable cutting edges rather than full regrinds, making maintenance routines predictable and economical. Using standardised indexable inserts such as the Korloy WCM-0503 simplifies stocking and shortens procurement cycles. The modular approach reduces waste and allows teams to restore cutting performance quickly by swapping inserts, rather than replacing entire tools. For workshops aiming to rationalise tooling inventory, this drill body supports a pragmatic strategy: keep a small set of inserts to cover larger production runs. Application guidance and expected benefits in daily use When integrated into a consistent machining routine, the body’s geometry and insert system reduce vibration and tool wear. The practical design supports operations on a variety of ferrous and non-ferrous workpieces when paired with the correct insert grade and cutting data. As a result, customers can expect improved hole tolerances and fewer reworks. For engineers seeking predictable output and lower per-hole costs, the U163TM provides a focused tool solution that aligns with industrial productivity goals. Choose the Teknik Makina indexable drill body U163TM for efficient insert changes and steady drilling performance — contact Metav Werkzeuge for tailored advice and order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: U163TM Manufacturer: Teknik Makina Facts Diameter: 26.5 mm Cutting length: 78 mm Overall length: 161 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.497 kg SKU: U163TM Special features Compatible with Korloy WCM-0503 inserts Indexable-insert drill body Designed for industrial metalworking FAQ Which insert type fits this drill body? The drill body accepts Korloy WCM-0503 inserts; matching the correct grade to the workpiece material is recommended for optimal performance. What is the drilling diameter and cutting length? The tool provides a drilling diameter of 26.5 mm with a cutting length of 78 mm for deep-hole applications. What shank dimensions should the toolholder accommodate? A 25 mm shank diameter with a shank length of 56 mm is required for secure mounting in standard holders. Is the U163TM suitable for series production? Yes, the indexable design and quick insert changes make the U163TM suitable for repetitive manufacturing and batch processing. How heavy is the drill body for manual handling? The body weighs approximately 0.497 kg, which facilitates handling during tool changes and set-up. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

There is a data inconsistency: the item is described as "Vollbohrer" (solid drill) while the specification also lists compatibility with replaceable indexable inserts (SPMG 07T3) and names insert manufacturers Taegutec and YG‑1. A true solid drill does not accept replaceable inserts, so these details conflict. Please confirm whether the tool is a solid drill or an indexable insert drill and provide corrected specifications (for example: confirmation of insert usage, correct insert designation, or explicit solid‑carbide construction). Until the product type and related technical data are clarified, a production‑ready product description cannot be created, as the conflicting information prevents accurate categorisation and detailed technical documentation.

Take advantage of the internal coolant and BLMP 0603 compatibility to reduce cycle times and prolong insert life; combined with a robust shank Ø25 mm, this cutter delivers stable machining across a range of applications. Order the shank cutter directly via Metav Werkzeuge or request specialist advice from our consultants. Shank cutter for BLMP 0603 indexable inserts — 26 mm, internal coolant (Teknik Makina) The Shank cutter for BLMP 0603 indexable inserts is a coolant-fed indexable milling solution designed for workshop and production environments where repeatability, fast serviceability and secure clamping are required. 26 mm diameter, 200 mm overall length Internal coolant for controlled chip evacuation Compatible with BLMP 0603 inserts, Taegutec fit Shank Ø25 mm and 4 cutting edges Faster cycles through indexable technology The use of indexable inserts provides a clear productivity advantage: worn cutting edges are replaced in seconds, which minimises machine downtime and reduces per-part tooling cost. The tool’s 26 mm diameter and balanced geometry support stable cutting conditions, while the four cutting edges share the load to extend insert life. For operations that prioritise output and consistent chip control, this design yields measurable efficiency gains without sacrificing process reliability. Consistent surface quality with coolant-fed machining Built-in internal coolant channels direct cutting fluid to the cutting zone for improved cooling and chip evacuation, which stabilises cutting temperatures and helps avoid built-up edge. The result is more consistent surface finishes and predictable tool wear. Combined with the robust shank Ø25 mm, the configuration enhances rigidity in clamping systems, translating to fewer chatter marks and reproducible results across batches. Compatibility and maintenance designed for uptime Compatibility with BLMP 0603 indexable inserts and the specification for Taegutec-compatible seats simplifies spare part logistics and sourcing. Insert retention uses M3x6.2 Torx screws and a T8 Torx key, permitting swift insert changes with common workshop tools. The tool’s 200 mm overall length and 40 mm cutting length balance reach and stiffness, enabling flexible use in both face and light profile milling while keeping maintenance straightforward and fast. Contact Metav Werkzeuge for tailored application guidance and to secure the Teknik Makina shank cutter (SKU S482-1TM) for immediate supply from our Emmerich warehouse Technical data Article number: S482-1TM Brand: Teknik Makina Product type: Shank cutter (indexable) Label: 26mm Schaftfräser BLMP 0603 L200mm mit Innenkühlung Core specifications Diameter: 26 mm Overall length: 200 mm Shank diameter: 25 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 0.771 kg Features & compatibility Internal coolant: yes Indexable inserts: BLMP 0603 Compatible insert brand: Taegutec Torx screw: M3x6.2 Torx key: T8 FAQ Which indexable inserts are compatible with this cutter? This cutter accepts BLMP 0603 indexable inserts; the seating is compatible with Taegutec-style inserts as specified for the Teknik Makina model S482-1TM. Is there internal coolant feed on the tool? Yes — the tool features internal coolant channels to direct cutting fluid to the insert cutting edge, improving cooling and chip evacuation for more consistent machining. What shank size is required in the toolholder? The shank diameter is 25 mm, so a holder or collet rated for Ø25 mm is required to achieve the intended rigidity and repeatability. How many cutting edges does the cutter provide and what is the benefit? The cutter uses 4 cutting edges, which distribute cutting forces across inserts to improve tool life and enable smoother material removal under moderate depths of cut. Which Torx key and screw are used for insert clamping? Insert clamping is secured with M3x6.2 Torx screws and requires a T8 Torx key for exchange operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the cutter's internal coolant, precise compatibility with LNMU 0303 indexable inserts and a rigid 25 mm shank for enhanced stability and reproducible results in serial production. Order the tool directly via Metav Werkzeuge or contact our consultants for application-specific advice. 26 mm shank milling cutter S686-1TM — for LNMU 0303 indexable inserts, internal coolant (Teknik Makina) 26 mm shank milling cutter S686-1TM designed for reliable indexable-insert milling in CNC operations, combining coolant-fed performance with a rigid shank and versatile cutting length Internal coolant for optimised tool cooling Compatible with LNMU 0303 indexable inserts 26 mm cutting diameter, 25 mm shank 60 mm cutting length for versatile operations Deliver consistent production results with compatible indexable inserts The S686-1TM is engineered around the LNMU 0303 insert system to provide a predictable machining cycle time and straightforward insert changeover. Compatibility with established insert geometries means fewer process variables and faster setup. The combination of a 26 mm cutting diameter and a 25 mm shank reduces runout sensitivity, delivering consistent radial engagement and repeatable cutter behaviour across batches. For shops aiming for stable cycle times, this configuration supports higher feed rates without sacrificing surface finish. Maintain tool life and improve chip control through internal coolant The tool’s internal coolant channel directs cutting fluid precisely to the insert pocket, assisting with chip evacuation and temperature control at the cutting edge. With 4 cutting edges and a 60 mm effective cutting length, the cutter balances material removal rate and edge life; operators can increase cutting parameters where the machine and workholding permit. For materials that generate heat quickly, targeted coolant flow reduces flank wear and helps maintain insert geometry for longer, lowering overall tooling cost per component. Rigid shank and secure fastening for reliable clamping A robust design with 150 mm overall length and a substantial shank diameter provides axial and radial stiffness, reducing vibration during machining. The tool weighs 0.61 kg, a value that contributes to a stable dynamic balance when installed in the spindle. Assembly and insert retention use a M2.5x7 Torx screw operated with a T8 Torx key, enabling quick, repeatable insert changes with minimal risk of incorrect torque. This secure clamping arrangement supports reliable operation in medium-duty finishing and light roughing applications. Practical benefits for workshop workflows Designed for easy integration into existing tool inventories, the cutter supports inserts from Tungaloy, simplifying procurement and spare-part stocking. The combination of internal coolant, a long cutting length and a compact shank diameter helps reduce unplanned tool changes and rework, contributing to improved uptime on multi-shift production schedules. For engineers evaluating process improvements, the tool’s predictable performance makes it suitable for both prototype runs and series production. Contact Metav Werkzeuge for tailored application advice on the S686-1TM — our specialists in Emmerich provide specification support and delivery coordination to get the right cutter to the workbench quickly Technical Data SKU: S686-1TM Type: Shank milling cutter Manufacturer: Teknik Makina Compatible insert: LNMU 0303 Compatible insert manufacturer: Tungaloy Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length (shank-side): 60 mm Cutting edges: 4 Weight: 0.61 kg Torx screw: M2.5x7 Torx key: T8 Special features Internal coolant Indexable-insert system compatibility Robust shank for reduced runout Quick-change Torx fastening system FAQ Which inserts fit this cutter? The S686-1TM is designed for LNMU 0303 indexable inserts; compatible inserts from Tungaloy are suitable for standard applications. Does the cutter provide internal coolant? Yes, the tool features internal coolant channels to direct fluid to the insert pocket and aid chip evacuation. What shank and cutting diameters are provided? The cutter has a 25 mm shank and a 26 mm cutting diameter. What are the overall and cutting lengths? Overall length is 150 mm with a 60 mm effective cutting length on the shank side. Which screw and key are required for insert clamping? Insert clamping uses a M2.5x7 Torx screw, tightened with a T8 Torx key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise indexing and robust shank dimensions for reliable milling performance; the 26 mm cutting diameter paired with compatibility for LOGU 0303 indexable inserts ensures efficient changeover and consistent results. Order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. 26 mm shank cutter for LOGU 0303 indexable inserts (Teknik Makina) The 26 mm shank cutter is a purpose‑built indexable‑insert milling tool for CNC applications, offering secure Torx fixation and a 200 mm overall length for versatile machining setups 26 mm cutting diameter Compatible with LOGU 0303 inserts Shank Ø 25 mm, overall length 200 mm Four cutting edges for stable milling Reliable compatibility and quick insert changes for uninterrupted production The design focuses on compatibility with LOGU 0303 indexable inserts, providing a predictable tooling standard that reduces setup time and simplifies inventory management. The Torx T8 fixation with an M3x7 screw secures each insert reliably, which helps maintain cutting stability and repeatability during high‑volume runs. For operations that value fast indexable replacement and minimal downtime, this configuration supports orderly shift handovers and consistent component quality. Robust shank geometry for secure clamping and vibration control With a 25 mm shank diameter and 200 mm overall length, the cutter offers a balance between reach and rigidity. The substantial shank supports firm clamping in standard tool holders and reduces the risk of deflection during face and slot milling. The tool’s four cutting edges distribute cutting forces evenly, which contributes to smoother surface finish and longer insert life under constant feed conditions. These geometric attributes are particularly beneficial in batch production where tool stability affects part tolerances. Clear performance indicators for process planning and optimisation Key measurable specifications—such as the 26 mm cutting diameter and 60 mm cutting length—enable precise process planning and allow engineers to calculate material removal rates and tool engagement more accurately. The tangible data helps in selecting feeds and speeds appropriate for the intended machine and workpiece, supporting efficient cycle times and predictable tool change intervals. Using known parameters reduces the need for trial runs and accelerates qualification of machining programmes. Practical operation and service considerations for workshop workflows The cutter’s standardised fixing system (Torx T8 / M3x7) simplifies maintenance tasks and spare‑parts stocking, while the indexed insert concept minimises costly regrinding downtime. The tool arrives as a ready‑to‑fit shank cutter compatible with Kyocera‑grade inserts of the LOGU 0303 family, enabling straightforward integration into existing tooling estates. For procurement teams, the standard SKU S684TM makes reordering and inventory tracking unambiguous. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina shank cutter into production processes and to confirm availability from our Emmerich stock. Technical Data Article number: S684TM Brand: Teknik Makina Label: 26mm shank cutter LOGU 0303 L200mm eClass: 21180806 Facts Cutting diameter: 26 mm Shank diameter: 25 mm Cutting length (shank cutting): 60 mm Overall length: 200 mm Number of cutting edges: 4 Weight: 0.811 kg Torx key: T8 Torx screw: M3x7 Special features Compatible with LOGU 0303 indexable inserts Suitable for Kyocera insert systems Indexable‑insert shank cutter design SKU S684TM Category: Shank cutter FAQ Which insert type fits this cutter? The cutter accepts LOGU 0303 indexable inserts; it is supplied for use with Kyocera‑compatible insert systems and secured with the specified Torx fixation. What are the key dimensions to check for holder compatibility? Relevant dimensions are cutting diameter 26 mm, shank Ø 25 mm, and overall length 200 mm; verify holder bore and projection to ensure secure clamping. How many cutting edges are available and what is the cutting length? The tool has four cutting edges and a cutting length of 60 mm, which supports even load distribution and stable milling. Is a specific screw or tool required for insert changes? Insert replacement uses a T8 Torx key and an M3x7 screw, matching standard workshop tool sets for quick service. What is the SKU for reordering and stock management? Reorder using SKU S684TM to ensure the correct configuration and compatibility are supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 26 mm cutting diameter and a 25 mm shank that deliver stable machining with XNKT 0604 indexable inserts, ensuring predictable cycle times and simple insert changes. Order the shaft milling cutter directly via Metav Werkzeuge or consult their specialists for application advice. Schaftfräser S840TM — Shaft milling cutter, 26 mm diameter, 25 mm shank (Teknik Makina) The Schaftfräser S840TM is a shaft milling cutter designed for indexable-insert machining with XNKT 0604 inserts, suitable for general face and shoulder milling tasks in production and job-shop environments. 26 mm cutting diameter 25 mm shank diameter 40 mm cutting length Compatible with Korloy XNKT 0604 inserts 90° cutting angle Reliable indexable-insert performance for consistent output The cutter is optimised for repeatable results when used with XNKT 0604 inserts, providing a straightforward replacement routine that reduces downtime. With a 26 mm diameter and 40 mm cutting length, the tool balances material removal rate and tool rigidity to maintain stable cutting forces. In practice, this translates to fewer unexpected interruptions during batch runs and a predictable tool life profile, which supports production planning and cost estimation. Designed shank geometry for secure clamping and runout control A 25 mm shank ensures solid clamping in standard toolholders and helps to reduce runout under high spindle speeds. The combination of the shank dimension and the 150 mm overall length gives a compact tool overhang for many milling setups, improving stiffness compared with longer alternatives. Clear specification of these dimensions supports correct holder selection and helps avoid vibration-related marks on workpieces. Efficient insert change and serviceability for workshop uptime The cutter uses a Torx fastening with an M3x7 screw and a T8 key, allowing fast, repeatable insert changes without specialised tools. Compatibility with Korloy XNKT 0604 indexable inserts means a broad choice of chipbreakers and grades for different materials; choosing the appropriate insert grade optimises surface finish and cutting economy. This modularity reduces inventory burden while maintaining the flexibility to adapt to various workpiece alloys. Practical advantages for day‑to‑day machining operations Featuring 3 cutting edges and a 90° cutting angle, the tool is suitable for standard face and shoulder milling where square-cut profiles are required. The overall weight of 0.572 kg contributes to manageable handling and secure balancing in automated tool-change systems. Clear, measurable specifications help purchasing and production engineers to integrate the cutter into jigs and fixtures with confidence, ensuring reliable, repeatable machining across shifts. For procurement and technical guidance on the S840TM shaft milling cutter from Teknik Makina, contact Metav Werkzeuge — purchase and expert advice are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: S840TM Manufacturer: Teknik Makina Designation: Schaftfräser for XNKT 0604 Indexable Inserts Numbers Diameter: 26 mm Shank diameter: 25 mm Cutting length: 40 mm Number of cutting edges: 3 Overall length: 150 mm Weight: 0.572 kg Cutting angle: 90° Special features Compatible with Korloy XNKT 0604 indexable inserts Torx screw: M3x7 Torx key: T8 FAQ Which indexable inserts fit this cutter? The cutter accepts XNKT 0604 indexable inserts; Korloy variants for that insert type are compatible with the S840TM. What are the key dimensions for toolholder selection? Relevant dimensions for holder choice are a 25 mm shank diameter, 26 mm cutting diameter and 150 mm overall length, as listed for the S840TM. How many cutting edges does the tool have and what cutting angle is provided? This milling cutter is specified with 3 cutting edges and a 90° cutting angle, suitable for face and shoulder milling operations. Which fastening parts are required for insert changes? Insert clamping uses a Torx screw sized M3x7 and the corresponding T8 Torx key for secure and repeatable fastening on the S840TM. Is the tool weight relevant for balancing in tool magazines? Yes — the tool weight is 0.572 kg, a value to consider when programming automatic tool-change systems or checking spindle balance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of a 26 mm cutting diameter, integrated internal coolant, and compatibility with 4NKT 06 indexable inserts for stable, efficient milling and reduced tooling costs; order the shaft milling cutter directly via Metav Werkzeuge or consult our specialists for application-matched recommendations. Shaft milling cutter S476-1TM — 26 mm, internal coolant, for 4NKT 06 indexable inserts (Teknik Makina) The Shaft milling cutter S476-1TM is an indexable-insert milling tool engineered for face and shoulder milling in industrial metalworking, designed to accept 4NKT 06 inserts for economical and repeatable cutting performance. 26 mm cutting diameter for stable engagement Internal coolant for enhanced chip evacuation Compatible with 4NKT 06 Taegutec indexable inserts 25 mm shank with 200 mm overall length Stable machining through optimised geometry and rigidity The cutter’s 26 mm diameter and 25 mm shank deliver a robust interface with the spindle, reducing vibration and improving surface finish during interrupted and continuous cuts. With three cutting edges, the design balances material removal rate and chip load per edge, which helps maintain consistent cutting forces and prolongs insert life. For production environments where repeatability matters, this construction gives a measurable increase in process stability and part-to-part precision. Quick indexable-insert changes to cut downtime and costs Using proven 4NKT 06 indexable inserts (compatible with Taegutec) the tool enables rapid insert replacement without regrinding whole cutters, resulting in lower tooling costs and predictable cycle times. Inserts are secured with M3x6.2 Torx screws using a T8 key, allowing controlled clamping torque and straightforward servicing at the machine. This modular approach is particularly advantageous in batch production or when multiple pocket geometries are required across different jobs. Directed coolant and chip control for longer service intervals The integrated internal coolant supplies lubricant and coolant directly to the cutting edge, which improves chip evacuation and reduces thermal load on the insert seat. A 30 mm effective cutting length provides a practical balance between reach and rigidity, helping to avoid excessive deflection in deeper pockets. Together, these features contribute to extended tool life and more consistent tool performance across long production runs. Request tailored tooling advice from Metav Werkzeuge for the Teknik Cutting Tools S476-1TM to ensure optimal insert selection and coolant setup for the intended application. Technical data Article number: S476-1TM Product type: Shaft milling cutter Label: 26 mm shaft milling cutter for 4NKT 06 L200 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 26 mm Shank diameter: 25 mm Cutting length (shank): 30 mm Overall length: 200 mm Weight: 0.815 kg Number of cutting edges: 3 Special features Internal coolant Compatible with 4NKT 06 indexable inserts (Taegutec) Torx screw: M3x6.2 Torx key: T8 FAQ Which indexable inserts fit this cutter? The shaft milling cutter accepts 4NKT 06 indexable inserts; compatibility with Taegutec inserts is specified for the S476-1TM. Does the tool provide internal cooling? Yes — the S476-1TM features internal coolant to deliver lubricant directly to the cutting zone, improving chip evacuation and thermal control. What are the key dimensions of the cutter? Diameter 26 mm, shank diameter 25 mm, cutting length 30 mm, overall length 200 mm, weight 0.815 kg for the S476-1TM. How are inserts clamped on this cutter? Inserts are secured with M3x6.2 Torx screws; the required key size is T8, enabling secure and repeatable clamping on the S476-1TM. For which machining tasks is this cutter suited? The cutter is intended for face and shoulder milling where an indexable-insert solution is preferred for economical insert changes and sustained productivity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise 26 mm diameter cutting, compatibility with BLMP 0603 indexable inserts and a rigid 25 mm shank for consistent machining results; order the tool directly via Metav Werkzeuge or consult our technical team for application advice. Shank cutter S481-2TM – 26 mm Ø, 150 mm overall length, for BLMP 0603 indexable inserts by Teknik Makina The Shank cutter S481-2TM is a robust milling solution engineered to accept BLMP 0603 indexable inserts, providing secure insert retention and predictable performance for industrial milling tasks. 26 mm cutter diameter for stable cutting Accepts BLMP 0603 indexable inserts 25 mm shank for secure toolholder fit 150 mm overall length for reach and rigidity Consistent cutting performance with indexable inserts The tool is designed around the economic and operational advantages of indexable inserts. Using BLMP 0603 inserts reduces downtime because inserts can be rotated or replaced quickly, while the cutter body maintains concentricity. With 4 cutting edges, the design balances chip evacuation and material removal rate to sustain process reliability in series production. This translates into steady cycle times and reproducible surface quality when machining common ferrous and non-ferrous components. Rigidity and mounting for accurate machining A stable interface between tool and spindle is essential for dimensional accuracy. The 25 mm shank and 150 mm overall length offer a compromise between reach and stiffness: sufficient projection for recessed features while limiting deflection during heavy cuts. The cutter secures inserts with an M3x6.2 Torx screw, tightened using a T8 Torx key, enabling fast insert changes and secure clamping. The measured mass of the tool contributes to runout stability and helps maintain concentric bore conditions in standard toolholders. Application scope and workshop integration Configured for compatibility with Taegutec indexable inserts, the cutter is suitable for face milling and slotting operations where indexable systems provide economic advantages over solid tools. The tool’s dimensions and build make it a practical choice for machine shops seeking predictable tool life and simplified reconditioning routines. For inventory planning and retrofitting into existing tool sets, the S481-2TM is identifiable by its SKU and straightforward replacement procedure for consumable inserts. For tailored advice on integrating the Teknik Makina S481-2TM into current processes or for ordering through Metav Werkzeuge, please contact our consultants at Metav Werkzeuge for precise application support and supply assurance Technical data SKU: S481-2TM Product type: Shank cutter Designation: Shank cutter for BLMP 0603 indexable inserts Core data Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting edges: 4 Shank cutting length: 30 mm Weight: 0.558 kg ECLASS: 21180806 Special features Compatible inserts: BLMP 0603 Suitable insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 Manufacturer: Teknik Makina FAQ What inserts fit this shank cutter? The cutter accepts BLMP 0603 indexable inserts; Taegutec inserts are specified as suitable for reliable clamping and performance. What are the main dimensions to check for toolholder compatibility? Key dimensions are 26 mm cutter diameter and a 25 mm shank diameter with 150 mm overall length; these determine suitability for standard holders. How are the inserts secured and changed? Inserts are fixed with an M3x6.2 Torx screw, using a T8 Torx key for safe and quick insert replacement. Is this cutter suitable for high-production environments? Yes; the combination of indexable inserts and 4 cutting edges supports fast insert changes and steady production cycles, making it appropriate for series manufacturing. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combines robust indexable cutting performance with internal coolant and a compact 25 mm shank for secure clamping; order the S481-3TM directly via Metav Werkzeuge or consult the technical advisors for application-specific support. 26 mm milling cutter S481-3TM – indexable cutter body for BLMP 0603 with internal coolant (Teknik Cutting Tools) The 26 mm milling cutter S481-3TM is a precision indexable cutter body for BLMP 0603 inserts, designed for stable peripheral milling and efficient chip evacuation in industrial machining environments. Internal coolant for optimised chip evacuation Compatible with BLMP 0603 inserts (Taegutec) 26 mm diameter with 25 mm shank Robust 150 mm overall length Stable geometry for precise, repeatable milling The cutter body features a 26 mm diameter and a 25 mm shank, combined with a short cutting projection to reduce vibration and runout. This geometry provides consistent surface finish and dimensional accuracy in batch production or single-part machining. The arrangement of four cutting edges balances material removal rate and cutting forces, allowing reliable peripheral milling where repeatability is critical. Clear specifications enable straightforward planning of cutting parameters and machine setup. Internal coolant and secure insert clamping extend tool life The built-in internal coolant channel delivers coolant directly to the cutting zone, improving chip control and reducing thermal load on the insert and cutter body. Better cooling permits higher cutting speeds and longer insert life, which lowers downtime and tooling cost per component. Insert retention uses a Torx fastener system (T8 key, M3x6.2 screw) for torsion-resistant clamping, enabling fast, repeatable insert changes with minimal setup time. Compatibility that simplifies workshop logistics Designed for BLMP 0603 indexable inserts and compatible with inserts from Taegutec, this cutter body integrates easily into existing tooling families. The 150 mm overall length and 30 mm cutting length suit a wide range of end milling and shoulder milling tasks without overextending the tool projection. The compact, balanced design reduces load on the spindle and supports predictable cycle times, making it a practical choice for production shops seeking dependable indexable tooling that fits standard toolholders. Contact Metav Werkzeuge for tailored technical advice and efficient supply from Emmerich — we provide application support and fast delivery for Teknik Cutting Tools products such as the S481-3TM Technical data Article number: S481-3TM Label: 26mm Schaftfräser BLMP 0603 L150mm mit Innenkühlung Manufacturer: Teknik Makina UID: S481-3TM Core technical data Cutter diameter: 26 mm Shank diameter: 25 mm Overall length: 150 mm Cutting length (shank): 30 mm Number of cutting edges: 4 Weight: 0.558 kg Special features Internal coolant: yes Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 Product type: milling cutter (indexable inserts) FAQ Which indexable inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; inserts from Taegutec are listed as compatible for the S481-3TM. Does the cutter provide internal coolant supply? Yes, the S481-3TM is equipped with internal coolant channels to direct coolant to the cutting zone and improve chip evacuation. What are the shank and cutter diameters? The tool has a 25 mm shank and a 26 mm cutter diameter, providing a compact yet rigid connection for standard toolholders. How many cutting edges does the cutter use? The cutter body is designed for four cutting edges, optimising balance between material removal rate and surface quality. Which fastening hardware is required for inserts? Insert clamping uses a Torx T8 key with an M3x6.2 screw for secure, repeatable retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of stable clamping with a 25 mm shank, the versatility of LNMU 0303 indexable inserts, and the efficient material removal delivered by four cutting edges for a reliable milling cycle — order the cutter directly via Metav Werkzeuge or consult their specialists for application support. Shank milling cutter S688TM by Teknik Makina – 26 mm diameter, for LNMU 0303 indexable inserts The Shank milling cutter S688TM is a tool designed for precision and productivity in milling operations with LNMU 0303 indexable inserts, suitable for both finishing and medium roughing tasks 26 mm cutter diameter for stable engagement Compatible with LNMU 0303 indexable inserts 25 mm shank for robust clamping 200 mm overall length for deep reach Increased throughput with fewer tool changes The S688TM is engineered for a high material removal rate through its configuration of four cutting edges and a substantial 26 mm diameter. Using standard LNMU 0303 indexable inserts, the tool enables repeatable cutting performance while minimising downtime associated with regrinds. Indexable inserts allow rapid replacement of cutting edges without removing the holder from the spindle, which translates into measurable time savings on the shop floor. For operations seeking a balance between cost efficiency and cycle time, this cutter supports sustained production runs with consistent surface quality. Secure clamping and reach for confident machining A 25 mm shank provides the stiffness required for reliable clamping in standard toolholders, reducing vibration and improving dimensional stability. With a 200 mm overall length and 60 mm cutting length, the design suits components that require deeper pocketing or extended reach while keeping deflection low when used within recommended parameters. The combination of a rigid shank and defined cutting length keeps tolerances achievable in repetitive milling tasks, helping to protect workpiece integrity and reduce scrap rates. Simple insert retention and workshop serviceability Insert change and fastening are straightforward: the cutter uses Torx fixing with a T8 key and M2.5x7 Torx screws, ensuring quick and secure fastening of each insert. Compatibility with inserts from established manufacturers such as Tungaloy guarantees easy access to consumables across supply chains. Clear mechanical fastening reduces risk of incorrect assembly and supports predictable tool life. If further specification or matching of insert grades is required for particular materials, Metav Werkzeuge’s advisors can assist with grade selection to align performance with the application. Contact Metav Werkzeuge for a tailored recommendation on the S688TM and assistance with tooling combinations and supply logistics Technical data Article number: S688TM SKU: S688TM Manufacturer: Teknik Makina Facts Diameter: 26 mm Shank diameter: 25 mm Overall length: 200 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.814 kg Special features Compatible with LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 Product type: Shank milling cutter Label: 26mm Schaftfräser LNMU 0303 L200mm FAQ What inserts fit this shank milling cutter? The cutter is designed for LNMU 0303 indexable inserts, enabling use of commonly stocked insert geometries for a range of finishing and medium-roughing tasks. Which insert manufacturers are compatible? The S688TM is specified for compatibility with inserts from Tungaloy, though equivalent LNMU 0303-format inserts from other manufacturers may also be used where geometries match. How is an insert fastened to the cutter? Each insert is secured with a Torx screw (type M2.5x7) tightened using a T8 Torx key, providing positive retention and straightforward replacement. For which machining tasks is this cutter best suited? This shank milling cutter is suitable for operations requiring stable engagement and reach, such as pocketing, face milling and shoulder milling where a 60 mm cutting length and 200 mm overall reach are advantageous. How does the shank size affect performance? The 25 mm shank offers robust clamping for reduced runout and vibration, improving dimensional accuracy and extending insert life under steady cutting conditions. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Characteristics: Order Number: S486TM Item: End Mill usable with 3PKT 1004 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Numerical Representations: Diameter: 26mm Cutting Edges: 2 Weight: 0.773kg Total length: 200mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Technical Data: Item: End Mill Brand: Teknik Makina Order Number: S463TM usable with ADMT 1606 Indexable Inserts of Walter Diameter: 26mm Angle: 90° Total length: 150mm Cutting Edges: 2 Weight: 0.545kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Combining a compact 26 mm cutting head with internal coolant and compatibility for WNMX 0603 indexable inserts provides efficient chip control and reduced cycle times; order the tool directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Shank cutter for WNMX 0603 indexable inserts — 26 mm, internal coolant (Teknik Makina) Shank cutter for WNMX 0603 indexable inserts designed for robust indexable milling tasks on industrial CNC machinery, offering stable clamping and effective coolant routing for consistent metal removal. 26 mm diameter for compact toolpaths Internal coolant for improved chip evacuation Compatible with WNMX 0603 indexable inserts Solid 25 mm shank for stable clamping High material removal rates with reliable coolant control The combination of a 26 mm cutting head and internal coolant enables sustained cutting performance during demanding machining cycles. With 4 flutes, the cutter balances material removal rate and surface finish: the multiple cutting edges distribute cutting forces and reduce load per edge, which improves tool life and dimensional stability. Internal coolant channels supply the cutting zone directly, enhancing chip evacuation and heat dissipation; this reduces thermal growth in the tool assembly and helps maintain consistent tolerances during longer runs. For production environments where cycle time and repeatability matter, the tool’s geometry is optimised to keep machining efficient without sacrificing control. Stability and repeatability for precision milling A 25 mm shank delivers secure clamping and minimises deflection in shoulder milling and slotting operations. The tool accepts WNMX 0603 indexable inserts, a common insert system that allows rapid reconditioning: worn inserts are exchanged in seconds, avoiding full-tool replacement and reducing downtime. Compatibility with established insert geometries from Korloy ensures a broad selection of grades and edge preparations for different workpiece materials. Together, the shank diameter and insert system provide a stable platform for repeatable results in batch production and fixture-based workflows. Service-friendly assembly and predictable maintenance Assembly and insert replacement are straightforward: the cutter uses a T8 torx key and an M2.5x6.5 fastening screw, enabling quick, tool-room maintenance without specialised equipment. The straightforward screw and key combination simplifies insert indexing and reduces the time needed for set-up changes. Because the coolant is delivered internally, the system requires normal inspection of coolant paths and proper sealing at the holder interface; routine checks maintain performance and prevent pressure loss. Clear mechanical interfaces mean predictable maintenance intervals and easy documentation for quality control. Versatile use in industrial milling applications Engineered for indexable milling tasks, this shank cutter suits peripheral milling, face milling, shoulder work and light to moderate slotting where an indexable cutter is preferable to solid tools. The tool’s construction supports machining strategies that prioritise fast insert changes and consistent edge geometry. It is especially useful where replacement inserts from established manufacturers are preferred for cost-effective tool management. The cutter is suitable for integration into standard collet or chuck systems that accept a 25 mm shank, providing flexibility across a range of machine setups. For application advice or to secure the Teknik Makina S906-1TM for immediate delivery, contact Metav Werkzeuge; technical enquiries are welcome via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S906-1TM Label: 26 mm shank cutter for WNMX 0603, L150 mm, internal coolant Product type: Shank cutter eClass: 21180806 Facts Diameter: 26 mm Overall length: 150 mm Weight: 0.582 kg Shank diameter: 25 mm Cutting length (flute length): 60 mm Number of cutting edges: 4 Special features Internal coolant Compatible with WNMX 0603 indexable inserts Fitting inserts manufacturer: Korloy Torx key: T8 Torx screw: M2.5x6.5 Manufacturer: Teknik Makina FAQ What insert type does this cutter accept? The cutter accepts WNMX 0603 indexable inserts; the S906-1TM is configured specifically for this insert family and works with Korloy grades. Is the tool suitable for automated production lines? Yes, the shank cutter S906-1TM, with its internal coolant and robust 25 mm shank, is designed for stable, repeatable performance in automated CNC environments. Which key and screw are required for insert changes? Insert retention uses a T8 torx key and an M2.5x6.5 screw; this facilitates quick and standardised insert replacement on the S906-1TM. Can this cutter be used for slotting and shoulder milling? The indexable shank cutter is suitable for peripheral milling, shoulder operations and light slotting where insert-based tooling provides efficiency and rapid changeover. How does internal coolant improve machining with this tool? Internal coolant directs cutting fluid to the cutting zone, improving chip evacuation and heat control; this enhances tool life and machining stability for the S906-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a rigid 25 mm shank, internal coolant and a compact 26 mm cutting diameter for consistent, high-feed milling. The combination of secure clamping, replaceable WNMX 09T3 inserts and a 140 mm overall length keeps production moving with low downtime — order via Metav Werkzeuge or contact our consultants for configuration advice. Indexable insert milling cutter for WNMX 09T3 — 26 mm, internal coolant (Teknik Makina) Indexable insert milling cutter for WNMX 09T3 designed as a modular cutter body for industrial milling applications where fast insert changes and coolant-assisted chip control are required 26 mm cutting diameter Internal coolant supply 25 mm shank for secure clamping Compatible with Korloy WNMX 09T3 inserts Consistent chip control and longer tool life through coolant delivery The body integrates a dedicated internal coolant channel that directs cutting fluid directly to the cutting zone, improving chip evacuation and reducing thermal load on the insert. This targeted coolant supply helps maintain cutting-edge integrity under continuous operation, resulting in extended service intervals and fewer unplanned tool changes. With a compact 26 mm diameter and robust construction, the cutter ensures repeatable results when paired with a suitable holder and coolant system, supporting higher process stability across shifts. Rigid shank and secure fastening for accurate machining A 25 mm shank diameter and a total length of 140 mm overall length provide a stable connection to the machine spindle, reducing vibration and runout during heavy engagement cuts. The 60 mm cutting length accommodates deep axial cuts while the tool’s fastening system uses M3x7 Torx screws (Torx key T8) for reliable insert clamping. The combination of precise shank dimensions and proven screw standards simplifies workshop logistics and minimises set-up time, enabling more consistent tolerances on serial parts. Flexible indexable system for fast changeover and process control Built to accept WNMX 09T3 indexable inserts from Korloy, the milling body makes replacement straightforward: worn edges are swapped in seconds, restoring cutting performance without regrinding. This modular approach reduces per-part tooling costs compared with solid tools and supports varying grades and geometries for different process steps. The design with two cutting edges per pocket enables balanced cutting forces and predictable engagement behaviour, making the tool suitable for a range of milling strategies where throughput and repeatability are priorities. Integration into production and reduced maintenance overhead As a production-oriented tool, the cutter body simplifies inventory management: a single holder accepts standard WNMX 09T3 inserts, while the internal coolant and standardised screw sizes streamline maintenance. The modest weight and dimensional footprint assist handling and changeover in busy production cells. Combined with the backing of Teknik Makina’s manufacturing and Metav’s distribution, the setup delivers practical benefits — fewer machine stoppages, faster insert swaps and clearer reordering processes for procurement teams. For supply, configuration support and fast delivery of Teknik Makina indexable insert milling cutters, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm the exact holder and insert combination for the application. Technical data Article number: S803-1TM Product type: Indexable insert milling cutter Manufacturer: Teknik Makina Internal coolant: Yes Compatible insert type: WNMX 09T3 Compatible insert manufacturer: Korloy Measurements Cutting diameter: 26 mm Overall length: 140 mm Shank diameter: 25 mm Cutting length: 60 mm Weight: 0.477 kg Cutting edges: 2 Features & compatibility Internal coolant channel Compatible with WNMX 09T3 indexable inserts Compatible insert manufacturer Korloy Torx screw M3x7 Torx key T8 SKU: S803-1TM FAQ Which insert type does this milling cutter accept? The cutter accepts WNMX 09T3 indexable inserts; the body is compatible with Korloy inserts and identified as SKU S803-1TM. Is there internal coolant and how is it supplied? Yes, the milling cutter features internal coolant channels that deliver fluid directly to the cutting edge to aid chip evacuation and reduce cutting temperatures. What are the key dimensions for clamping and setup? The tool has a 25 mm shank diameter, 26 mm cutting diameter, 60 mm cutting length and 140 mm overall length, which should be matched to an appropriately rated tool holder. Which screw and key are required for insert fixation? Insert fixation uses M3x7 Torx screws tightened with a T8 Torx key, allowing secure and standardised insert clamping. What benefits does the indexable system provide to production? The indexable system enables rapid insert changes, predictable cutting behaviour with two cutting edges, and lower per-part tooling costs compared with regrindable solid cutters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact 180 mm overall length combined with a 26 mm tool diameter and secure clamping for consistent left-hand grooving. Order the holder via Metav Werkzeuge or request advice from our consultants for specification checks and rapid supply from Emmerich. Grooving clamp holder for MGM 300 indexable inserts — 26 mm, left-hand, 180 mm (Teknik Makina) A robust grooving clamp holder designed for left-hand parting and grooving operations with MGM 300 indexable inserts, suitable for production turning applications on lathes and turn-mill centres. 26 mm tool diameter Compatible with MGM 300 inserts (Korloy) Left-hand cutting direction 180 mm overall length, compact design Greater process reliability through defined geometry and compatibility The holder delivers repeatable results thanks to a precisely defined 26 mm tool diameter and a 20 mm shank compatible with standard tool posts. Built to accept MGM 300 indexable inserts from Korloy, the unit ensures insert seating and clamping are consistent across tool changes, which reduces setup variance and scrap. The specified 15.5 mm cutting head width and a nominal 3 mm cutting-width capability make this tool suitable for narrow grooving and parting tasks where tight tolerances are required. By describing the geometry in plain terms, workshops gain clarity on where the holder fits into existing tooling systems. Secure clamping and quick adjustment for uninterrupted production Clamping is achieved via an M5x12 clamping screw, tightened with a 4 mm Allen key, providing strong axial fixation without complex procedures. The compact design, at 180 mm overall length and a mass of 0.45 kg, keeps tool overhang low and helps maintain rigidity during aggressive cuts. The maximum grooving depth of 6 mm allows controlled material removal in a single pass for many applications; for deeper sections, a staged approach is recommended. Clear, standard fastenings and a simple adjustment routine support short changeover times and higher machine uptime, delivering measurable efficiency gains on the shop floor. Designed to support production goals and operator confidence Intended for left-hand operations, this holder is optimised for routines where directionality matters, such as facing from the chuck or back-grooving. Its compatibility with a widely used insert family simplifies purchasing and stock management, reducing the number of different toolholders and spare inserts required. The shank designation S20Q and the compact profile allow straightforward integration into automatic tool changers and modular tool systems. For quality assurance, the construction supports predictable cutting behaviour, which helps meet batch tolerances and customer specifications consistently. Contact Metav Werkzeuge today for expert guidance on the Teknik Makina grooving clamp holder (SKU K900TM) and to arrange prompt supply from Emmerich with tailored delivery options Technical data Article number: K900TM Label: 26mm Stechklemmhalter MGM 300 L180mm Manufacturer: Teknik Makina eClass: 21181005 Facts Diameter: 26 mm Shank diameter: 20 mm Overall length: 180 mm Weight: 0.45 kg Cutting width: 3 mm Max grooving depth: 6 mm Cutting head width: 15.5 mm Cutting direction: left Special features Compatible inserts: MGM 300 Suitable insert manufacturer: Korloy Clamping screw: M5x12 Allen key: 4 mm Shank designation: S20Q SKU: K900TM FAQ What insert types fit this holder? The holder is made for MGM 300 indexable inserts and is specified as compatible with inserts from Korloy for reliable seating and repeatability. Is the holder suitable for automatic tool changers? Yes, the S20Q shank and compact 180 mm overall length support integration into modular tool systems and many automatic tool changers. What is the maximum grooving depth? The maximum recommended grooving depth is 6 mm, enabling single-pass removal for many narrow-grooving tasks. Which clamping hardware is used? Clamping is secured with an M5x12 screw; adjustment and tightening use a 4 mm Allen key for straightforward maintenance. Is this a left- or right-hand holder? This tool is configured for left-hand cutting direction, optimised for grooving and parting operations that require that orientation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com