Gibt es einen Hahn und Kolb Online Shop?

Take advantage of a rigid, indexable drilling solution that combines 28 mm cutting diameter, 56 mm effective cutting length and compatibility with Korloy WCM-0503 inserts for efficient larger-bore machining; order directly via Metav Werkzeuge or consult the specialists for application advice. Solid drill U124TM — indexable drill, Ø 28 mm, 25 mm shank (Teknik Cutting Tools) The Solid drill U124TM is an indexable solid drill designed for precision holemaking in production and workshop environments, compatible with Korloy WCM-0503 inserts for economical insert replacement Indexable cutting system, compatible with Korloy WCM-0503 Solid 25 mm shank for rigid clamping 28 mm cutting diameter for larger bores 56 mm effective cutting length, 140 mm overall Consistent productivity for larger-bore operations The combination of a 28 mm cutting diameter and a 56 mm cutting length enables steady, repeatable holemaking in longer cycles. The indexable design with WCM-0503 inserts reduces downtime for tool changes and keeps overheads predictable; insert replacement is faster than regrinding solid tools, which supports higher overall throughput and a lower cost per hole. This section highlights performance gains achievable through optimised tool life and straightforward insert handling. Rigidity and clamping that support precision A 25 mm shank and a 140 mm overall length deliver the balance between reach and stiffness required for deeper holes. Rigid clamping and appropriate toolholder selection are critical: the sturdy shank reduces vibration and helps maintain precision even at higher feed rates. For workshops integrating the cutter into CNC or turret systems, the indexable concept offers consistent dimensional control because insert geometry remains constant without the variable wear pattern of solid-ground drills. Economical operation and workshop benefits Compatibility with Korloy inserts means access to established insert grades and geometry options, enabling rapid adaptation to different materials and cutting conditions. The indexable approach supports reduced tool costs and quicker changeovers, which is particularly valuable for batch processing and mixed-production shops. In practical terms, the tool's configuration helps to keep machine idle time low and to simplify inventory management where insert-only replacement is preferred over whole-tool procurement. For professional workshops seeking robust, indexable drilling for larger bores, contact Metav Werkzeuge to discuss Teknik Cutting Tools' Solid drill U124TM (SKU U124TM) and arrange tailored delivery from Emmerich. Technical data Article number: U124TM Manufacturer: Teknik Makina Core dimensions Diameter: 28 mm Overall length: 140 mm Cutting length: 56 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.491 kg Design & special features Compatible inserts: WCM-0503 Insert manufacturer compatibility: Korloy Indexable insert system Solid drill body for rigid clamping FAQ What insert type does this drill use? The Solid drill U124TM is designed for WCM-0503 indexable inserts and is compatible with Korloy insert grades for flexible cutting performance. Is the shank suitable for standard toolholders? The tool features a 25 mm shank, which is intended for standard holders that provide secure clamping and the rigidity required for deeper-hole work with the U124TM. What is the effective cutting length and overall reach? The cutter provides a 56 mm cutting length and a 140 mm overall length, offering sufficient reach for many through-hole and partial-depth applications. Can the U124TM be used in automated production cells? Yes — the indexable concept of the U124TM supports fast insert changes and predictable tool behaviour, making it well suited to automated and CNC production environments. How does the indexable system affect operating costs? By allowing insert-only replacement, the indexable design lowers material waste and reduces tooling expenditure over time compared with solid regrindable drills. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tooling solution that combines precise holemaking, repeatable rigidity and easy insert changeover — the Ø 28 mm drill body with a 25 mm shank and 84 mm cutting length supports stable machining and efficient tool maintenance; order via Metav Werkzeuge for reliable supply from Emmerich or consult the specialists for process optimisation Vollbohrer U166TM — Indexable insert drill, Ø 28 mm, 84 mm cutting length (Teknik Makina) The Vollbohrer U166TM is a purpose‑built indexable insert drill body designed for industrial metalworking where predictable hole quality and quick insert replacement are required Ø 28 mm cutting diameter 25 mm shank diameter 84 mm cutting length Compatible with Korloy WCM‑0503 inserts Greater rigidity for consistent hole quality The drill body is engineered around a 25 mm shank, which increases stiffness in the holder and reduces vibration during penetration. Greater rigidity directly translates into improved runout control and more consistent bore tolerances, especially on medium‑diameter holes. With a 28 mm nominal diameter and an 84 mm cutting length, the geometry balances access and stability to deliver repeatable results when set up with the correct spindle speeds and feeds. This combination supports productive batch runs and lowers scrap rates through mechanical stability and controlled chip formation. Minimise tooling cost with indexable inserts Designed for use with Korloy WCM‑0503 indexable inserts, this drill body separates the cutting edge from the tool body so that only the insert needs replacing after wear. The result is a lower cost per hole and shorter downtime compared with solid‑tool regrinds. Insert technology also enables rapid selection of grades and geometries for different materials and surface finishes; changing the insert adapts the same body to diverse jobs, which supports lean inventory and faster response to mixed production demands. Simple integration and predictable handling Compact dimensions — 168 mm overall length and a 56 mm effective shank length — make the body straightforward to mount in standard toolholders while keeping overhang modest for reduced deflection. The unit weight of 0.576 kg gives a sense of balance in spindle change routines and transport between stations. These measured dimensions help in calculating effective reach and in selecting appropriate holder clamping to maintain concentricity, so the tool becomes an easy component of existing toolpacks and machining strategies. Backed by dependable supply and industrial expertise Sourcing this indexable drill body through Metav Werkzeuge connects the tool to a broad service and supply network that emphasises consistent availability and technical competence. Metav’s approach to accessible precision means the drill body can be procured alongside complementary inserts and holder solutions, enabling a consolidated supply chain and a single point for order management. For production environments prioritising uptime and tooling standardisation, the configuration offered here supports straightforward replacement and planning. For tailored tooling advice or to secure prompt delivery of the Teknik Makina U166TM — discuss insert grades, holder compatibility and delivery options directly with Metav Werkzeuge in Emmerich Technical data Article number: U166TM Manufacturer: Teknik Makina SKU: U166TM Facts Diameter: 28 mm Overall length: 168 mm Cutting length: 84 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.576 kg Special features Compatible with Korloy WCM‑0503 indexable inserts Indexable‑insert drill body for rapid edge replacement Compact design for reduced overhang and improved rigidity FAQ Which indexable inserts fit this drill body? The drill body accepts Korloy WCM‑0503 indexable inserts as specified for the Teknik Makina U166TM What are the key dimensions to check for holder compatibility? Check the 25 mm shank diameter, 56 mm shank length and 168 mm overall length to ensure correct clamping and minimal overhang for the U166TM What is the effective cutting length and hole diameter? The tool provides an 84 mm cutting length for a nominal hole diameter of 28 mm Can the drill body be used for different materials? Material suitability depends on the selected insert grade and cutting parameters; the U166TM functions as a carrier for appropriate Korloy WCM‑0503 inserts chosen for the specific workpiece material How does the indexable concept affect running costs? Using replaceable inserts with the U166TM reduces the cost per cutting edge compared with solid regrinds and shortens maintenance time because only the worn insert is changed Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precision engineering, standardised insert compatibility and a robust shank for repeatable hole quality in production. The combination of a 28 mm cutting diameter, extended 112 mm cutting length and a secure 25 mm shank diameter supports stable machining and reduced tool changes. Order the drill directly via Metav Werkzeuge or consult Metav’s specialists for application advice. U728TM Indexable Insert Drill — Ø28 mm, 112 mm cutting length (Teknik Makina) The U728TM indexable insert drill for metalworking centres and production drilling, designed for long cutting engagement and reliable insert replacement. 28 mm cutting diameter 112 mm cutting length 25 mm shank diameter Compatible with SPMG 0904 inserts Consistent machining performance with defined cutting geometry The U728TM is built to deliver repeatable hole quality across series production by combining a long cutting engagement with a solid, machined body. The 112 mm cutting length gives extended reach for deep-hole applications while the Ø28 mm diameter maintains concentricity and roundness under load. Engineers benefit from predictable tool life and stable cutting forces, which reduces process variation and the need for costly rework. The robust construction also supports reliable clamping in standard toolholders, enabling steady chip evacuation and improved surface finish. Faster tool changes and lower process costs through standard inserts Compatibility with SPMG 0904 indexable inserts from established vendors (notably Taegutec and YG-1) simplifies logistics and lowers inventory overhead. Using widely available inserts means quick replacement and minimal machine downtime; worn cutting edges are swapped rather than replacing the entire tool body. This standardisation helps to calculate cost-per-hole precisely and demonstrates a clear cost-benefit advantage for batch production. The insert interface is designed for secure seating, ensuring repeatable positioning and consistent cutting geometry after every change. Stable clamping and balanced design for vibration control A 25 mm shank diameter combined with a 56 mm shank length and an overall length of 196 mm provides secure toolholding and improved torsional rigidity. The moderate mass (approx. 0.642 kg) contributes to a balanced assembly that resists chatter during plunge and peck drilling cycles. These mechanical properties translate into better hole tolerances and longer insert life, particularly when machining steels and alloys where tool deflection would otherwise compromise form and finish. The design supports standard mounting systems, making integration into existing tool inventories straightforward. Workflow reliability supported by Metav’s supply and expertise Selecting a tool is part of a wider production decision. Metav’s distribution philosophy focuses on accessible precision: a European supply hub in Emmerich acts as a quality filter, and a broad catalogue reduces the number of suppliers required. With a track record of over 48,000 customers and more than 250,000 products, Metav provides continuity of supply and technical advice that helps plan tool replacement cycles and spares stocking. For procurement and process engineers this means reliable deliveries and transparent handling from order to workshop. Contact Metav Werkzeuge for tailored application guidance on the U728TM and to check insert availability and delivery options. Technical data Article number: U728TM Manufacturer: Teknik Makina Facts Diameter: 28 mm Total length: 196 mm Cutting length: 112 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.642 kg Special features Compatible insert type: SPMG 0904 Compatible insert manufacturers: Taegutec, YG-1 Indexable insert design for quick edge changes FAQ What materials is this drill suitable for? The U728TM indexable insert drill is intended for general metalworking applications; compatibility with specific materials depends on the chosen SPMG 0904 insert grade and the cutting data supplied by insert manufacturers Which insert manufacturers are compatible with the tool? This drill accepts SPMG 0904 inserts and is compatible with inserts from Taegutec and YG-1, allowing use of standardised cutting grades and chipbreakers How is the tool clamped in the machine spindle? The tool features a 25 mm shank diameter and a 56 mm shank length for secure clamping in standard holders; appropriate clamping torque and runout control are recommended for best results What are the key dimensions to plan for in a tool setup? Important dimensions are the 28 mm cutting diameter, 112 mm cutting length and an overall length of 196 mm; these determine reach, clearance and holder selection Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable design that combines precise cutting capacity with straightforward tool integration: the 28 mm diameter and 84 mm cutting length provide high material removal for production runs, while the 25 mm shank enables secure clamping and stable operation—order directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina indexable insert drill body — 28 mm, 25 mm shank An indexable insert drill body designed for CNC and production drilling, compatible with SPMG 0904 inserts for flexible machining in workshops and industrial shops. High material removal for production use Secure 25 mm shank for stable clamping Compatible with SPMG 0904 indexable inserts Balanced 168 mm overall length for deep holes Consistent production performance for repetitive drilling The indexable insert drill body delivers steady machining cycles thanks to its defined geometry and compatibility with standard inserts. With a 28 mm cutting diameter and a 84 mm effective cutting length, the tool is set up for medium to deep through-hole operations where repeatability matters. The use of replaceable inserts reduces downtime compared with regrinding solid tools and keeps cycle times predictable, which supports throughput targets on CNC lathes and machining centres. Clear data on diameter, cutting length and overall length helps production planners match the tool to process parameters. Flexible integration with common insert systems Designed to accept SPMG 0904 inserts, the drill body integrates with known indexable systems from suppliers such as Taegutec and YG-1, allowing inventory optimisation and easier sourcing of spare parts. This compatibility means a workshop can standardise on a single insert grade across different holders, improving cost-efficiency and simplifying toolroom logistics. The option to use widely available inserts supports quick recovery from tool wear and maintains part quality without complex reconditioning. Secure clamping and compact overall dimensions A 25 mm shank diameter ensures a reliable clamping interface in standard drill holders and adaptors, while the 56 mm capture/holder length provides sufficient engagement for rigid setups. The tool’s 168 mm overall length and compact mass (approx. 0.562 kg) make it suitable for both turret-fed machines and handheld fixtures where access and balance are factors. The result is a stable tool that reduces chatter risk and improves surface finish, which is particularly valuable when machining steels and common engineering alloys. Practical benefits for workshop efficiency Using an indexable approach with this body reduces the number of complete drills that must be kept in stock: worn cutting edges are replaced quickly, not the entire tool, shortening maintenance breaks. The readily available technical data—diameter, shank size, cutting length and compatible insert types—supports straightforward process planning and minimises trial-and-error setups. For manufactures seeking predictable cycle times and simplified tool management, the combination of defined dimensions and insert compatibility makes this an economical choice. For supply, technical clarification or to secure rapid dispatch for Teknik Cutting Tools components, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange order and delivery details Technical data Article number: U828TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Facts Diameter: 28 mm Overall length: 168 mm Cutting length: 84 mm Shank diameter: 25 mm Shank/holder length: 56 mm Weight: 0.562 kg ECLASS: 21180201 Special features Compatible inserts: SPMG 0904 Compatible insert manufacturers: Taegutec, YG-1 Design: indexable insert drill body FAQ What insert type does the drill body accept? The drill body accepts SPMG 0904 indexable inserts; compatible suppliers include Taegutec and YG-1 for flexible sourcing. Is the shank size suitable for standard holders? Yes, the 25 mm shank diameter and 56 mm engagement length are sized for common drill holders and adaptors used in production environments. What hole depth can be achieved with this tool? The tool’s 84 mm cutting length and 168 mm overall length are suited to medium-depth through-holes typical in component machining. Which materials are appropriate for this drill body? The indexable design is intended for general engineering materials; the choice of insert grade determines suitability for specific steels and alloys. How does the indexable concept reduce workshop downtime? Worn cutting edges are swapped quickly, so the tool body remains in service while inserts are replaced—this reduces tool change time and maintenance complexity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precise holemaking, easy insert replacement and straightforward tool handling for uninterrupted production. Order the Teknik Makina U624TM indexable drill directly via Metav Werkzeuge or consult the technical team for integration advice. U624TM indexable drill by Teknik Makina — 28 mm diameter, 25 mm shank The U624TM indexable drill is a compact drill body engineered for production environments, offering replaceable cutting inserts for economical high-volume holemaking. Ø28 mm cutting diameter 25 mm tool shank 112 mm cutting length Compatible with Korloy WCM-0503 inserts Faster cycle times through focused geometry and replaceable cutting edges The design centres on delivering consistent productivity: a 28 mm cutting diameter combined with a 112 mm cutting length provides a balance between hole depth capacity and rigidity. As an indexable drill, the unit eliminates full-tool replacement when cutting edges wear, shortening maintenance cycles and reducing tooling cost per hole. The use of standardised inserts keeps replenishment simple — the body accepts Korloy WCM-0503 inserts, allowing a workshop to rely on widely available cutting tips and minimise inventory complexity. This results in measurable efficiency gains on repetitive drilling operations in manufacturing and subcontracting environments. Practical handling and reduced machine downtime A focused shank specification contributes to secure clamping and predictable run-out. The 25 mm shank and 56 mm shank length enable stable fixing in common toolholders, while the moderate mass (0.662 kg) reduces spindle load without compromising stiffness. With replaceable edges rather than solid carbide tips, maintenance becomes a quick swap of inserts, which supports lean workflow practices on CNC machines and in manual drilling stations. The straightforward replaceability also helps sustain part tolerances across long batches, supporting consistent quality without prolonged stoppages. Clear technical fit for workshop and CNC integration The overall length of 196 mm and the shank dimensions are typical for drill bodies intended for both vertical machining centres and lathes with live tooling; these dimensions should be checked against the intended holder and reach requirements before selection. The construction is focused on clamp-and-go practicality: the centrepiece is the tool body that accepts indexable inserts, rather than a monolithic twist drill, so stocking compatible inserts and a suitable tightening key ensures rapid turnarounds. The compatibility with Korloy WCM-0503 inserts also simplifies the selection of grades for different workpiece materials where necessary. Technical guidance for consistent hole quality When planning a machining cycle, match the insert grade to the workpiece and set conservative feed rates for the first passes to verify chip evacuation and stability. The combination of 112 mm cutting length and the body geometry requires attention to support the workpiece and reduce deflection for deep holes. The 25 mm shank typically fits standard collets and holders; ensure the holder provides full contact length to maintain concentricity. Regular inspection of the insert seats and torqueing of the clamping screws will preserve alignment and help to achieve repeatable hole tolerances across production batches. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina U624TM indexable drill into production—technical consultancy and ordering support available at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: U624TM Manufacturer: Teknik Makina Dimensions & mass Diameter: 28 mm Overall length: 196 mm Cutting length: 112 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.662 kg Compatibility & features Indexable drill body For replaceable indexable inserts Compatible with Korloy WCM-0503 inserts FAQ Which inserts are compatible with this drill body? The U624TM drill body is compatible with Korloy WCM-0503 indexable inserts, which are specified for the cutting edges of this model. What are the main dimensions to check for toolholder compatibility? Key dimensions are 28 mm diameter, 25 mm shank diameter and 196 mm overall length; these values determine holder selection and reach. How long is the effective cutting length? The effective cutting length is 112 mm, which indicates the working depth available for through-hole and shallow blind-hole applications. What shank length should the clamping fixture accommodate? The clamping fixture should allow for a 56 mm shank length to ensure full contact and stable clamping. What is the unit weight for spindle load considerations? The tool weighs 0.662 kg, which helps when calculating spindle load and dynamic balancing for high-speed operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of 28 mm diameter, 56 mm effective cutting length and a compact 25 mm shank for stable, repeatable drilling operations; order the component directly via Metav Werkzeuge or consult our specialists for application-matched advice. Vollbohrer U928TM — solid drill, 28 mm diameter · 140 mm overall length · Teknik Makina The Vollbohrer U928TM is a solid drilling solution designed for indexable insert applications, combining a long overall length for deep-hole access with a short cutting length for controlled chip formation in serial production. 28 mm diameter for medium drilling 140 mm overall length for deep access 56 mm cutting length for controlled chip removal High-performance drilling where repeatability matters The drill body is engineered for consistent results in production environments: its 28 mm diameter and 56 mm cutting length deliver a balance between rigidity and chip evacuation, while the 140 mm overall length enables access to deeper features without sacrificing stability. The modular nature of the tool means cutting performance is defined by the chosen indexable insert, so tool life and surface finish can be adapted to process requirements. This configuration supports efficient cycle times and helps reduce rework in series machining. Secure clamping and compatibility to reduce setup time With a 25 mm shank for standard rigid chucks and a matching 56 mm shank length, the tool ensures reliable clamping and concentricity in high-torque operations. The drill body is specified for SPMG 0904 inserts and is compatible with inserts from Taegutec and YG-1, enabling straightforward sourcing of cutting grades and geometries. Using established insert standards simplifies inventory management and minimises downtime when inserts are exchanged. Clear workshop advantages and practical handling Weighing approximately 0.5 kg, the component is easy to handle during tool changeovers yet remains heavy enough to feel robust, supporting safe installation and removal. The indexable approach allows economical replacement of worn cutting edges instead of entire tools, improving cost efficiency per part and lowering waste. Where insert selection is matched to material and speed, the tool body supports controlled chip flow and predictable surface quality, making it suitable for repeated production cycles. Discuss application requirements with Metav Werkzeuge for tailored advice on the Teknik Cutting Tools solid drill U928TM — call +49 2822 7131930 or email info@metav-werkzeuge.com to receive specification support or ordering information Technical data SKU: U928TM Manufacturer: Teknik Makina Dimensions and weight Diameter: 28 mm Overall length: 140 mm Cutting length: 56 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.5 kg Features Compatible inserts: SPMG 0904 Compatible insert manufacturers: Taegutec; YG-1 Product type: solid drill (indexable insert body) SKU reference: U928TM FAQ What insert type fits this drill body? The drill body accepts SPMG 0904 indexable inserts; compatible manufacturers listed are Taegutec and YG-1 for a wide choice of grades and geometries. Is the body suitable for deep-hole drilling? Yes, the 140 mm overall length provides access for deeper holes while the 56 mm cutting length keeps chip control and rigidity suitable for many production tasks. Which clamping system is recommended? A chuck or holder that secures a 25 mm shank with sufficient axial support is recommended to maintain concentricity and repeatability with the U928TM. Can the cutting performance be adapted for different materials? Cutting performance depends on the selected insert grade and geometry; using SPMG 0904 inserts from Taegutec or YG-1 allows adaptation to a broad range of materials and cutting conditions. What is the workshop benefit of an indexable drill body? An indexable design reduces tooling cost per cutting edge, simplifies maintenance and shortens downtime because only inserts are replaced, not the entire tool body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the 28 mm cutting diameter and compatibility with SCMT 09T3 indexable inserts for consistent, repeatable T-slot production; the robust 16 mm shank and Torx-fastened inserts ensure secure clamping and fast tooling changes. Order the T-slot cutter directly via Metav Werkzeuge or request advice from our consultants for application-specific setup. T-slot cutter TKC192TM — 28 mm diameter, for SCMT 09T3 indexable inserts (Teknik Makina) A T-slot cutter for SCMT 09T3 indexable inserts, designed to produce precise T-slots in standard milling operations with efficient insert replacement and dependable clamping. 28 mm cutting diameter for precise T-slots Accepts SCMT 09T3 indexable inserts 16 mm shank diameter for secure clamping Faster slotting with consistent cutting geometry The 28 mm cutting diameter combined with a 55° cutting angle provides a stable engagement geometry, which reduces vibration and promotes consistent slot profiles across runs. With two cutting edges, the tool balances load distribution and simplifies machining strategies, enabling shorter cycle times on repetitive tasks. The compatibility with SCMT 09T3 indexable inserts allows the use of established grades for varied workpiece requirements while maintaining predictable performance. Secure mounting and quick insert maintenance A 16 mm shank with an overall length of 100 mm offers rigid support for standard collets and holders, improving concentricity during operation. The insert is secured with a M3.5x8.5 Torx screw, tightened with a T15 Torx key, which standardises service procedures and minimises downtime. The low mass of the assembly (approx. 0.132 kg) aids rapid acceleration and deceleration when employed in automated cycles, while the straightforward screw‑retention system keeps maintenance time to a minimum. Built for productive workshops with reliable sourcing Designed for use in professional milling environments, this cutter body accepts industry-standard inserts and fits established toolholder systems, simplifying inventory management. The combination of precise geometry and standardised fastening supports reproducible results batch after batch. Backing from an experienced supplier ensures consistent availability and traceable quality control, supporting continuous production without unnecessary interruptions. For secure procurement and application guidance on the Teknik Makina TKC192TM T-slot cutter, contact Metav Werkzeuge for order coordination and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: TKC192TM Manufacturer: Teknik Makina EClass: 21180605 Facts Cutting diameter: 28 mm Overall length: 100 mm Shank diameter: 16 mm Cutting length (shaft): 40 mm Cutting edges: 2 Cutting angle: 55° Weight: 0.132 kg Special features For SCMT 09T3 indexable inserts Torx screw M3.5x8.5 for insert clamping Torx key: T15 Product type: T-slot cutter Label: 28mm T-Nut Fräser SCMT 09T3 L100mm FAQ What insert type is required for this cutter? The cutter accepts SCMT 09T3 indexable inserts; this designation is specified for the TKC192TM body and matches common triangular insert families. Which toolholder systems suit the cutter's shank? The 16 mm shank is compatible with standard collets and holders designed for 16 mm tool shanks; ensure correct clamping for optimal concentricity. How are inserts secured and changed? Inserts are clamped with a M3.5x8.5 Torx screw and a T15 Torx key is used for tightening and removal, allowing rapid and repeatable insert changes. Is the cutter balanced for high-speed milling? The two‑edge design and compact mass (approx. 0.132 kg) support stable operation; however, balance checks and holder compatibility checks are recommended for high peripheral speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise T-slot cutting with a 28 mm diameter tool and reliable compatibility with SCMT 09T3 indexable inserts to maintain consistent slot geometry and production tempo; order directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter for SCMT 09T3 indexable inserts — 28 mm, L200 mm (Teknik Makina) T-slot cutter for precise machining of T-slots and T-nuts using SCMT 09T3 indexable inserts, designed for secure clamping and repeatable slot geometry in production environments. 28 mm diameter for deep T-slots Designed for SCMT 09T3 indexable inserts 16 mm shank for secure clamping T15 Torx fixing, M3.5x8.5 screw Consistent slot geometry through precise cutting mechanics The cutter provides a reliable solution for producing uniform T-slots, with a 28 mm nominal diameter and a 55° cutting angle that together ensure predictable chip flow and stable slot profiles. Using SCMT 09T3 indexable inserts allows fast seat-and-run replacement, reducing downtime and keeping cycle times low. The two cutting edges deliver a balanced cut that minimises vibration and results in repeatable dimensions across a batch, which is vital when tolerance control and interchangeability are required on jigs, fixtures and component assemblies. Stable clamping and tool life for uninterrupted machining A 16 mm shank and a compact overall length of 200 mm combine to deliver good rigidity for slotting operations from the arbor or holder. Secure fastening is achieved with a T15 Torx drive and an M3.5x8.5 screw, providing repeatable insert retention under moderate cutting forces. The modest tool mass supports reduced spindle load and controlled runout, contributing to longer insert life and predictable maintenance intervals. This mechanical reliability translates into fewer interventions at the machine and steadier production throughput. Indexable system benefits and integration into tooling strategies Adopting an indexable T-slot cutter simplifies tooling logistics: the insert-based concept allows stocking fewer cutters while keeping a supply of SCMT 09T3 inserts for fast replenishment. The tool is suited to series production where changeover speed and consistent surface finish matter; replacing inserts is quicker and more economical than regrinding solid tools. Paired with a coherent holder strategy, the cutter supports a cost-effective route to maintaining quality across multiple workpieces, while the compatible design from Teknik Makina aligns with standard holder interfaces for straightforward integration. Contact Metav Werkzeuge for tailored application support and to discuss suitable insert grades or machining parameters for specific materials. Technical data Article number: TKC195TM Label: 28mm T-Nut Fräser SCMT 09T3 L200mm Manufacturer: Teknik Makina Numerical data Diameter: 28 mm Overall length: 200 mm Weight: 0.272 kg Shank diameter: 16 mm Cutting length (shank): 32 mm Cutting edges: 2 Cutting angle: 55° Torx key: T15 Torx screw: M3.5x8.5 Special features Compatible with SCMT 09T3 indexable inserts Indexable insert system for fast replacement Two cutting edges for balanced machining Designed for T-slot / T-nut profile production FAQ What insert type does the cutter accept? The cutter accepts SCMT 09T3 indexable inserts, which are standard triangular inserts suitable for the intended T-slot geometry. Is the shank suitable for standard tool holders? Yes, the 16 mm shank is specified for secure clamping in compatible holders, providing good rigidity for slotting tasks. What is the nominal diameter and overall length? The tool is specified with a 28 mm diameter and an overall length of 200 mm, intended for T-slot production with adequate reach. How many cutting edges are fitted and what is the cutting angle? The cutter uses two cutting edges and a 55° cutting angle, optimised to balance chip evacuation and slot accuracy. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust industrial drilling solution that combines a substantial 29.5 mm cutting diameter with a long 87 mm cutting length for efficient material removal and stable chip control; order the tool directly via Metav Werkzeuge or consult our specialists for application matching. Solid drill U829-1TM – 29.5 mm cutting diameter, 25 mm shank by Teknik Makina The Solid drill U829-1TM is an indexable-insert drilling solution designed for production machining where repeatable hole quality and quick insert replacement are required. 29.5 mm cutting diameter 25 mm shank diameter 87 mm cutting length Compatible with SPMG 0904 inserts High material removal rates with predictable performance The combination of a 29.5 mm cutting diameter and an 87 mm cutting length delivers high-volume chip evacuation and stable cutting forces during through-hole and deep-hole operations. The measured geometry of the tool reduces vibration and helps maintain concentricity over the cycle, which in turn supports consistent hole tolerances. For production environments this means fewer reworks and more reliable cycle times, while the tool’s 0.585 kg mass contributes to a balanced spindle load without excessive inertia. Clear mounting and setup for fast machine changeovers With a 25 mm shank diameter and a defined 56 mm clamping length, the tool is straightforward to fit in standard holders and adaptors. The specified shank length assists in setting the correct projection and minimises runout risk when clamped to the recommended depth. Because the design accepts indexable inserts, the cutting geometry can be restored quickly by replacing the insert type SPMG 0904, reducing downtime compared with regrinding solid cutters. The tool’s 171 mm overall length gives a practical reach while maintaining rigidity for routine drilling tasks. Insert compatibility and maintenance advantages This drilling solution accepts indexable inserts of type SPMG 0904 and is compatible with inserts from Taegutec and YG-1, enabling flexible sourcing of cutting edges. Indexable inserts offer a cost-effective approach to maintain sharp cutting edges: only the insert is exchanged when wear occurs, rather than the entire tool. The modular nature of the system simplifies inventory management and allows teams to select grades and coatings from established insert manufacturers to suit specific cutting conditions and materials. Designed for industrial use and predictable procurement Manufactured for workshop and shop-floor use, the tool supports standardised workflows and repeatable setups. The design focus is on predictable tool life and straightforward replacement procedures, which aligns with industry demand for reliable consumables in serial production. Metav’s role as a precision partner provides an additional assurance: a broad product range and centralised distribution from Emmerich support continuous supply and pragmatic procurement for production planners. Contact Metav Werkzeuge for detailed application advice or to arrange procurement of the U829-1TM solid drill — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist support and delivery options Technical Data Article number: U829-1TM Manufacturer: Teknik Makina Facts Diameter: 29.5 mm Overall length: 171 mm Cutting length: 87 mm Shank diameter: 25 mm Shank length (clamping length): 56 mm Weight: 0.585 kg Special features Compatible inserts: SPMG 0904 Compatible insert manufacturers: Taegutec, YG-1 FAQ What insert type does the tool accept? The tool accepts SPMG 0904 indexable inserts; compatible insert suppliers include Taegutec and YG-1 for a broad choice of grades and coatings. What are the key dimensions to check before mounting? Verify the 25 mm shank diameter and the 56 mm clamping length when preparing holders; overall length is 171 mm and cutting length 87 mm. Is the drill suitable for production changeovers? Yes, the indexable-insert concept enables rapid edge changes and predictable set-ups, making it well suited to production environments with frequent changeovers. How does the cutting length affect performance? An 87 mm cutting length provides deeper reach while maintaining rigidity; this improves chip evacuation and helps sustain consistent hole quality during longer machining cycles. Which manufacturers supply compatible inserts for this tool? Compatible inserts are available from Taegutec and YG-1, allowing selection of grades optimised for different cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of precision, proven insert compatibility and secure clamping for reliable holemaking; the tool’s generous 29.5 mm diameter and 87 mm cutting length deliver consistent performance across long runs. Order directly via Metav Werkzeuge or consult the technical team for application advice. Indexable Insert Drill U169TM — Teknik Makina · 29.5 mm diameter · 25 mm shank The Indexable Insert Drill U169TM is a purpose-built drill body for industrial holemaking, engineered to accept indexable inserts for efficient and repeatable material removal in production and repair shops. 29.5 mm drill diameter 25 mm shank for secure clamping 87 mm cutting length for deep holes Compatible with Korloy WCM-0503 inserts Consistent productivity through engineered stability The drill body is designed to ensure stable chip evacuation and repeatable hole quality in series production. With a 25 mm shank, the holder provides secure clamping in standard toolholders, reducing vibration and improving bore accuracy. The combination of a 29.5 mm cutting diameter and 87 mm cutting length supports productivity gains when deeper bores are required, while the moderate 0.61 kg mass keeps spindle load predictable. This construction leads to fewer rejects and less rework, translating into tangible time savings on the shop floor. Clear compatibility for fast tooling decisions Compatibility with Korloy WCM-0503 inserts simplifies procurement and inventory management by allowing the use of established indexable tooling grades. The drill body accepts standard insert geometries, which makes replacement straightforward and minimises downtime during tool changes. Stating the insert type and manufacturer gives purchasing and planning departments the confidence to source consumables that match tool performance requirements without lengthy qualification cycles. Practical benefits that reduce total process cost Indexable insert tooling reduces per-hole cost by separating the cutting edge from the body; worn inserts are replaced rather than discarding the entire tool. The U169TM’s geometry supports efficient cutting parameters for many steels and general engineering alloys, improving tool life of the inserts and lowering overall tooling expenditure. The combination of the 87 mm cutting length and robust shank design means fewer tool setups are required for multi-pass operations, improving machine utilisation. Supportive documentation and workshop integration The drill body’s dimensions and interfaces are intentionally standardised to integrate into existing toolholding systems with minimal adaptation. Technical staff will appreciate clear numerical data for fixture and programme preparation, and maintenance routines are simplified by the replaceable insert concept. For additional technical data or to confirm suitability for a specific application, Metav’s technical advisors are available to provide detail drawings and process recommendations. Contact Metav Werkzeuge for tailored application support or to request detailed drawings and ordering information — Metav’s experts can advise on inserts, clamping and feed parameters to match production needs. Technical Data Article number: U169TM Manufacturer: Teknik Makina Product name: Indexable insert drill Facts Diameter: 29.5 mm Overall length: 171 mm Cutting length: 87 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.61 kg Special features Compatible inserts: WCM- 0503 Compatible insert manufacturer: Korloy Suitable for indexable insert drilling FAQ What materials is the drill body suited to machine? The Indexable Insert Drill U169TM is intended for general engineering alloys and typical production steels; insert selection should be matched to the workpiece material for best results. Which inserts fit this drill body? This drill body is specified for Korloy WCM-0503 type indexable inserts; matching the insert grade to the application will deliver optimal life and hole quality. What are the key dimensions to check for toolholder compatibility? Check the 25 mm shank diameter, overall length of 171 mm and 87 mm cutting length to ensure correct clamping and reach in the toolholder and machining programme. How often should the insert be changed? Insert life depends on material and cutting conditions; the U169TM benefits from rapid replacement of worn inserts to maintain bore quality and minimise machine downtime. Is this product available with technical drawings or cutting data? Cutting data and drawings can be provided for the Indexable Insert Drill U169TM by Teknik Makina; Metav Werkzeuge can assist with feed and speed recommendations for specific machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise insert compatibility and a robust shank design that ensure stable internal turning and predictable cycle times; order the THB103TM boring tool directly via Metav Werkzeuge or ask our consultants if needed. Boring tool THB103TM by Teknik Makina — 290 mm capacity, for CCMT 09T3 indexable inserts The Boring tool THB103TM is a heavy‑duty internal turning tool engineered for machining centres, optimised for use with CCMT 09T3 indexable inserts and medium to large bore diameters. Compatible with CCMT 09T3 indexable inserts 290 mm cutting diameter for extended reach Shank diameter 40 mm for stable clamping Cutting height 93.7 mm for secure insert seating Precise insert compatibility for repeatable finishes The tool is designed around the widely used CCMT 09T3 insert geometry to provide repeatable edge placement and consistent surface quality. By using a standard insert family, tool change and stocking are simplified and process stability is improved. The assembly ensures accurate insert seating and clearance, which reduces vibration and prolongs insert life; this results in fewer interruptions for re‑grind or replacement and more predictable machining cycles. Compatibility with established indexable inserts also enables faster setup times in shops that standardise on common cutting grades. Robust shank and bore capacity for stable machining A solid shank diameter of 40 mm combines with an effective cutting diameter of 290 mm (with a maximum cutting diameter of 350 mm) to provide the rigidity required for deep internal turning. The design reduces deflection under load, permitting heavier material removal rates while maintaining dimensional accuracy. The tool’s cutting height of 93.7 mm secures the insert in a stable pocket, reducing the risk of chatter during interrupted cuts. For production environments where tolerance and surface finish are critical, the mechanical stability of the assembly translates directly into reduced scrap rates and fewer rework operations. Easier integration, fewer interruptions in the workflow Integration into existing toolholders and turret stations is straightforward thanks to the standardised form factor and clear specification of mounting dimensions. Shops benefit from predictable tool behaviour when switching between similar setups, leading to reduced setup time and improved overall equipment effectiveness (OEE). Metrology and quality checks are simplified because the tool produces stable results with standard inserts; as a consequence, process documentation and quality protocols remain consistent across batches. For procurement, the association with a recognised supplier streamlines replenishment and aftermarket support. For reliable integration of Teknik Makina tooling into precision workshops, contact Metav Werkzeuge for procurement advice and specification support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THB103TM Designation: 290 mm boring tool for CCMT 09T3 Manufacturer: Teknik Makina ECLASS: 21041590 Facts Cutting diameter: 290 mm Maximum cutting diameter: 350 mm Shank diameter: 40 mm Cutting height: 93.7 mm Special features Compatible inserts: CCMT 09T3 Product type: Boring tool SKU: THB103TM Suitable for internal turning operations FAQ What insert type is required for this boring tool? The THB103TM is designed for CCMT 09T3 indexable inserts; the toolbed and pocket geometry match this insert family for secure seating and consistent cutting geometry. What are the key dimensions to check for mounting? Check the shank diameter (40 mm) and the cutting diameter specifications (290 mm nominal, 350 mm maximum) to ensure compatibility with the machine turret or toolholder when fitting the THB103TM. Can this tool be used for large bore machining? Yes — the tool’s nominal cutting capacity of 290 mm and its maximum cutting diameter of 350 mm make it suitable for medium to large bore internal turning applications with stable clamping. How does the cutting height affect performance? The cutting height of 93.7 mm secures the insert in the pocket and reduces deflection and vibration, which improves surface finish and increases insert life on the THB103TM. Is this tool suitable for high‑volume production environments? The THB103TM’s robust shank and standardised insert compatibility support repeatable performance and reduced downtime, making it appropriate for series production where process stability is essential. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of high‑rigidity design and precise insert compatibility for consistent fine finishing; the robust 290 mm cutting capability and 40 mm shank ensure stable machining and fewer tool changes. Order the tool directly via Metav Werkzeuge or request technical advice from our consultants. Fine‑finishing boring tool for CCMT 09T3 indexable inserts — 290 mm cutting capacity The Fine‑finishing boring tool for CCMT 09T3 indexable inserts is engineered for accurate internal finishing in medium to large bores, providing a stable platform for fine machining operations with standard CCMT 09T3 inserts. Large 290 mm cutting capacity Compatible with CCMT 09T3 inserts 40 mm shank for enhanced rigidity Up to 350 mm maximum cutting diameter Precision and productivity for fine finishing The head is designed to support fine finishing tasks where dimensional accuracy and surface quality are decisive. With a substantial 290 mm nominal diameter and dedicated compatibility for CCMT 09T3 inserts, the tool reduces the need for multiple passes by enabling consistent chip control and predictable radial engagement. This translates into shorter cycle times and improved throughput on components where tight tolerances and low surface roughness are required. The construction aims to maintain repeatability across batches, supporting justifiable process planning in production environments. Stability and rigidity to reduce rework A robust 40 mm shaft provides a solid connection to the machine spindle or toolholder, increasing rigidity and reducing deflection during finishing cuts. The combination of a high‑stiffness shank and the tool’s geometry allows controlled use up to a 350 mm cutting diameter, while the specified 93.7 mm cutting height gives the necessary reach for deeper bores without compromising stability. Reduced vibration means fewer surface defects and lower risk of premature insert wear, contributing to predictable tool life and reduced rework rates. Workflow advantages in the machine shop Compatibility with indexable inserts such as the CCMT 09T3 family offers operational advantages: fast insert changes, standardised inventory, and the ability to tailor grades for different steels or finishing needs. The modular approach supports rapid setup changes and keeps spindle downtime to a minimum — a clear benefit where small series and varied job orders dominate. Backed by the experience of Teknik Makina, the design supports streamlined workflows and better utilisation of machining capacity, helping to align productivity with quality targets. Compatibility, setup and handling explained Mounting and adjustment are straightforward when the tool is integrated into standard tooling systems; the head accepts CCMT 09T3 style inserts and is labelled internally for the correct orientation and clamping procedure. The product designation and SKU THB113TM should be referenced when preparing tooling lists or ordering replacement heads and inserts. For commissioning, basic checks of clamping torque and run‑out are recommended to ensure ideal performance; correct setup further enhances the tool’s ability to deliver consistent fine finishes over extended runs. For fine finishing tasks that demand rigidity and reproducible results, choose the Teknik Makina THB113TM — contact Metav Werkzeuge in Emmerich for ordering or to discuss application details at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: THB113TM Manufacturer: Teknik Makina eClass: 21041590 Facts Diameter: 290 mm Max cutting diameter: 350 mm Shank diameter: 40 mm Cutting height: 93.7 mm Special features Compatible with CCMT 09T3 indexable inserts Label: 290mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 Product type: Fine‑finishing boring tool FAQ Which insert type fits this tool? The tool is designed for CCMT 09T3 indexable inserts and accepts standard CCMT 09T3 geometries for fine finishing applications. What is the maximum recommended cutting diameter? The maximum cutting diameter listed is 350 mm; machining strategy and machine rigidity will determine safe cutting parameters for each setup. How does the 40 mm shank benefit machining? A 40 mm shank increases overall stiffness and reduces deflection, which helps maintain dimensional accuracy and surface quality during finishing cuts. Is the tool suitable for deep bore finishing? With a 93.7 mm cutting height and the specified geometry, the boring head is suitable for deeper finishing operations within the tool’s reach and machine capabilities. How should the tool be referenced when ordering spares or inserts? Use the model designation and SKU THB113TM together with the note that the head is compatible with CCMT 09T3 inserts to ensure correct spare parts and insert selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise chamfering with a 29 mm cutting diameter, a sturdy 25 mm shank, and a 50 mm cutting length for deeper edge preparation; efficient indexing and secure fixing reduce changeover time. Order the chamfer mill directly via Metav Werkzeuge or ask our consultants for tailored advice. Chamfer mill S355TM by Teknik Makina – Ø29 mm, L110 mm A Chamfer mill S355TM engineered for accurate chamfering in shank cutter applications, offering secure clamping and compatibility with Korloy indexable inserts. 29 mm cutting diameter for robust chamfers 25 mm shank for solid toolholder clamping 50 mm cutting length for deeper chamfers Compatible with Korloy indexable inserts Consistent edge geometry for reliable finishing The design delivers precision chamfering through a controlled tool geometry that stabilises the cut and reduces vibration. With a 29 mm diameter and a defined cutting length, the tool provides repeatable results across batches, supporting predictable downstream assembly and finishing processes. For production environments where consistent chamfer angles matter, this cutter minimises rework and contributes to process reliability. Secure clamping and straightforward indexable insert changes A 25 mm shank ensures firm seating in standard toolholders, increasing concentricity and reducing runout risk. The cutter uses a single cutting edge arrangement that simplifies indexing and toolpath planning while the M4x10 screw secures the insert reliably. Insert retention is managed with a Torx T15 drive for consistent torque during maintenance, supporting fast, repeatable insert changes and low downtime. Compatibility that reduces tooling complexity Built to accept Korloy indexable inserts, the cutter integrates into tooling systems already using Korloy grades, enabling stock consolidation and simpler spare-part handling. The configuration fits typical shank cutter workflows and allows the use of specialised inserts for diverse chamfer geometries. This compatibility means toolrooms can standardise insert families and benefit from broader availability and proven insert performance. Durable construction with predictable handling characteristics Weighing 0.278 kg and finished to industry tolerances, the cutter balances handling convenience with robust performance. The overall length of 110 mm gives a practical reach for many chamfering setups while maintaining stiffness. Specified as a shank cutter within the tooling category, the component supports stable machining cycles and dependable life under standard operating conditions, helping to avoid unnecessary tool changes and maintain throughput. Contact Metav Werkzeuge for availability, technical advice and purchasing of the Teknik Makina Chamfer mill S355TM directly from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S355TM Manufacturer: Teknik Makina Product type: Chamfer mill Core specifications Diameter: 29 mm Overall length: 110 mm Weight: 0.278 kg Shank diameter: 25 mm Cutting length: 50 mm Number of cutting edges: 1 Special features Compatible with Korloy indexable inserts Torx key: T15 Torx screw: M4x10 Category path: Zerspanen > Schaftfräser FAQ What inserts are compatible with this cutter? The chamfer mill S355TM is compatible with Korloy indexable inserts, enabling the use of standard Korloy grades and geometries for chamfering tasks. How is the insert secured and what drive is required? Insert retention on the Teknik Makina Chamfer mill S355TM is by an M4x10 screw tightened with a Torx T15 drive, ensuring a secure and repeatable clamping interface. What are the key dimensions for toolholder selection? Key mounting dimensions for the S355TM are a 25 mm shank diameter and an overall length of 110 mm; these values guide holder choice and set-up planning. How many cutting edges does the cutter have and what does that mean for machining? The cutter features one cutting edge; this simplifies indexing and can improve chip evacuation and control for chamfer operations compared with multi-edge variants. Is the cutter suitable for deep chamfers? With a 50 mm cutting length and a 29 mm diameter, the S355TM is configured to perform deeper chamfers while maintaining stability when clamped in an appropriate shank holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tool that combines precise chamfering geometry with secure clamping and straightforward insert changes; the tool supports Korloy inserts and is suitable for medium‑duty edge preparation on milling centres. Order directly via Metav Werkzeuge or consult the technical team for application advice. 29 mm chamfer mill L90 mm — Chamfer cutter with 25 mm shank (Teknik Makina) A 29 mm chamfer mill L90 mm designed for accurate edge profiling and chamfer preparation in milling operations 29 mm diameter for precise chamfering 90 mm overall length for extended reach 25 mm shank for robust toolholding Compatible with Korloy inserts Consistent chamfers through defined geometry The chamfer mill is engineered to deliver repeatable edge preparation thanks to its optimised diameter and single cutting edge. The 29 mm tool body and defined cutting geometry produce uniform chamfer angles with minimal burr formation, which reduces rework and inspection time. Where consistent component appearance and fit are required, this tool supports higher first‑pass quality and predictable cycle times. Rigid clamping and extended reach minimise vibration A 25 mm shank combined with a 90 mm overall length provides a balance between reach and stiffness. The increased shank diameter improves toolholding stability, lowering the risk of chatter during chamfering operations on vertical or horizontal machining centres. The 40 mm cutting length allows access to recessed features while maintaining the mechanical resilience necessary for repeatable edge finishing. Fast insert changes cut downtime Insert fixation via a standard Torx screw enables quick maintenance and reduces machine idle time. The cutter uses a Torx key T15 and an M4x10 screw for secure clamping; the simple fastening concept supports fast replacement of worn inserts, helping to keep throughput high. This practical fixing system translates into measurable gains in productivity for batch runs and frequent tool changes. Application versatility and traceability for production Designed as a dedicated chamfering tool for milling operations, the cutter accepts inserts from Korloy, offering a wide selection of grades for different workpiece requirements. The product is identified as SKU S354TM, making tool management and reordering straightforward within an organised inventory system. Traceable components support quality workflows and enable rapid tool replacement in scheduled maintenance. Discuss application needs with Metav Werkzeuge and secure the Teknik Cutting Tools chamfer mill S354TM with fast delivery from Emmerich; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S354TM Label: 29mm Fasenfräser L90mm Product type: Chamfer mill Manufacturer: Teknik Makina ECLASS: 21180806 Facts Diameter: 29 mm Overall length: 90 mm Weight: 0.264 kg Shank diameter: 25 mm Cutting length (shank): 40 mm Number of cutting edges: 1 Special features Compatible with Korloy inserts Torx key: T15 Torx screw: M4x10 SKU: S354TM Category path: Zerspanen > Schaftfräser FAQ What machining tasks is this chamfer mill suited for? The chamfer mill is designed for edge profiling and chamfer preparation on milling centres; it excels at producing consistent chamfers and preparing edges for assembly or welding. Which insert manufacturer is compatible with this cutter? This cutter is compatible with Korloy inserts, allowing selection of grades suited to the workpiece and cutting conditions. What are the key dimensions to check for toolholder compatibility? Important dimensions are the 25 mm shank diameter, 90 mm overall length, and 29 mm cutter diameter; these ensure correct fit and reach in the toolholder. How is the insert secured and how quick is replacement? The insert is secured with an M4x10 screw tightened using a T15 Torx key, providing a fast and reliable method for insert changes. Is the tool suitable for recessed or hard‑to‑reach chamfers? The 90 mm overall length and 40 mm cutting length permit access to many recessed features while maintaining sufficient stiffness for precise chamfering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise chamfer control, a rigid 25 mm shank and compatibility with Korloy indexable inserts for uninterrupted production. Order the chamfer mill directly via Metav Werkzeuge or ask our consultants for matching holders and insert recommendations. Chamfer mill S356TM — 29 mm diameter, 25 mm shank (Teknik Makina) The Chamfer mill S356TM is a robust indexable cutter engineered for repeatable chamfering and edge preparation in production and workshop environments 29 mm chamfer diameter 25 mm shank for stable clamping 200 mm overall length for deep reach Compatible with Korloy indexable inserts Engineered for consistent chamfering accuracy and productivity The S356TM delivers a clear technical advantage via its 29 mm cutting diameter combined with a 25 mm shank, providing high radial stiffness for consistent chamfer geometry. With a single cutting insert configuration, the design reduces vibration and helps maintain surface quality during repetitive operations. The solid geometry and balanced mass (approx. 0.412 kg) support stable spindle performance, which translates into predictable tool life and reduced scrap rates. The ability to fit standard Korloy indexable inserts contributes to lower operating costs through accessible insert supply and fast replacement. Rapid tool changes and straightforward setup to cut downtime Setup and maintenance are designed for workshop efficiency: the cutter secures inserts with an M4x10 screw tightened using a Torx T15 key, allowing quick and safe indexable-insert replacement. The 60 mm cutting length on the shank and the 200 mm overall length permit flexible positioning in typical clamping systems, reducing the need for frequent tool reorientation. Fewer components and a simple fastening method mean less time at the bench and more time in production, supporting operational continuity in batch runs or single-part flows. Robust construction that supports repeatable results A 25 mm shank diameter ensures secure clamping in standard holders and minimises run-out, which is essential for precise chamfer angles and tool balance at speed. The single-insert concept focuses cutting forces on one well-supported edge, improving heat dissipation and lowering mechanical stress on the holder. These features combine to deliver reliable repeatability and consistent edge finish over multiple insert changes, making the cutter a solid choice where process stability is a priority. Practical fit for workshop and production workflows Designed for use where indexable-insert systems are standard, the cutter integrates easily into existing toolsets that rely on Korloy inserts, streamlining inventory and tool management. Its balanced design and measured dimensions make it suitable for series production and maintenance workshops that require a dependable chamfering solution without complex setup. The SKU S356TM identifies the version with a 29 mm diameter and the extended 200 mm overall length for tasks requiring additional reach. Discuss the Teknik Cutting Tools S356TM with Metav Werkzeuge to verify holder compatibility and stock availability — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for personalised advice and fast delivery information. Technical Data SKU: S356TM Product type: Chamfer mill Label: 29mm Fasenfräser L200mm Manufacturer: Teknik Makina eClass: 21180806 Facts Diameter: 29 mm Overall length: 200 mm Shank diameter: 25 mm Cutting length (shank): 60 mm Weight: 0.412 kg Number of cutting edges: 1 Special features Compatible with Korloy indexable inserts Torx screw: M4x10 Torx key: T15 Category path: Schaftfräser / Shaft cutters FAQ What shank diameter is required for tool holders? The cutter features a 25 mm shank; the S356TM is intended for holders that accept a 25 mm shank for secure clamping. Which inserts fit this chamfer mill? This tool is compatible with Korloy indexable inserts; choose the appropriate Korloy insert grade for the material and chamfer angle required. How long is the tool and what reach does it offer? The overall length is 200 mm, with a 60 mm cutting length on the shank, offering extended reach for deeper chamfering tasks. How is the insert secured and what tool is needed? Inserts are fastened with an M4x10 screw using a Torx T15 key for quick and secure replacement. Is the cutter suitable for series production environments? Yes — the S356TM’s rigid 25 mm shank and single-insert design are optimised for repeatability and reduced downtime in production settings. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, rigid boring solution that combines compatibility with standard IR/ER inserts and straightforward maintenance for uninterrupted workshop operation; the design delivers reliable clamping for 16 IR inserts and convenient integration into existing toolholders from Metav Werkzeuge. S25R STIR boring bar — STI for IR/ER indexable inserts, 25 mm shank S25R STIR boring bar as a right-hand cutting tool for precision internal turning and boring with IR/ER indexable inserts Right-hand cutting for conventional spindle setups 25 mm shank for rigid clamping and reduced vibration Compatible with 16 IR indexable inserts 200 mm overall length for mid-reach operations Stable cutting and consistent bore quality The S25R STIR is engineered to provide rigidity and dimensional consistency in internal turning operations. With a 25 mm shank and a 29 mm body diameter, the bar reduces deflection under cutting loads and helps maintain concentricity. The 40 mm cutting height gives sufficient clearance for indexed insert seating while keeping the tool profile compact. These dimensional choices translate directly into repeatable bore tolerances and fewer rework cycles, which supports efficiency and predictable process planning in production environments. Fast insert changes and toolholder compatibility Designed specifically for the STI system, the tool accepts 16 IR indexable inserts and mates with an IR16 clamping holder, enabling fast insert replacement without complex adjustments. The indexable system separates cutting geometry from the shank, so wear is managed economically: worn inserts can be changed quickly, restoring original cutting geometry and reducing downtime. The right-hand cutting orientation matches standard lathe and boring head setups, streamlining tool set-up procedures on the shop floor. Practical dimensions for workshop fit and handling With a 200 mm overall length and a mass of 0.762 kg, the bar is balanced for handling and installation while offering sufficient reach for many internal operations. The compact form factor eases storage and jigs mounting, and the S25R STIR ISO designation simplifies procurement and inventory labelling. The modest weight and standardised shank dimension support secure clamping in conventional boring fixtures, improving tool life through reduced micro-movement at the interface. Reliability, maintenance and process integration The mechanical simplicity of an indexable boring bar keeps routine maintenance straightforward: periodic inspection of insert seating, clamp torque and cutting-edge condition prevents unexpected downtime. The combination of a standardised IR16 clamping interface and a recognised ISO tool code aids in process documentation and changeover control. For operations seeking predictable throughput and a low-administration tooling strategy, this configuration supports leaner tool management and reproducible machining results. For precision internal turning with proven compatibility, request the Teknik Cutting Tools S25R STIR via Metav Werkzeuge — technical supply and purchasing support are available from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: K356TM ISO designation: S25R STIR Type: STI for IR/ER indexable inserts Manufacturer: Teknik Makina Dimensions & weight Shank diameter: 25 mm Cutting height: 40 mm Body diameter: 29 mm Overall length: 200 mm Weight: 0.762 kg Cutting direction: right Compatibility & features Compatible insert size: 16 IR Clamping holder reference: IR16 Suitable for STI indexable insert system Right-hand cutting configuration FAQ What insert size does this boring bar accept? The boring bar accepts 16 IR indexable inserts; the tool is specified for the STI system and pairs with IR16 clamping holders. Is the bar suitable for right-hand cutting only? Yes — the tool is configured as a right-hand cutting boring bar (ISO designation S25R STIR). Which shank diameter and length should be expected? The shank is 25 mm in diameter and the overall length is 200 mm, making it suitable for standard mid-reach boring tasks. Can this tool be used with common IR16 holders? The design is compatible with IR16 clamping holders and is intended for quick insert changes within that interface. What is the product reference for ordering? Order reference: SKU K356TM — Teknik Makina S25R STIR boring bar for 16 IR indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise internal turning with a left-hand STI toolholder that pairs compact rigidity with universal ER16 clamping; its 25 mm shank and 200 mm overall length deliver stable performance across series machining. Order directly via Metav Werkzeuge or consult the team for specification matching. STI for IR/ER Indexable Inserts boring bar — S25R STIL by Teknik Cutting Tools, left-hand, ER16 The STI for IR/ER Indexable Inserts boring bar is designed for internal turning with ER16 clamping and left-hand cutting orientation, suitable for workshop and production environments Left-hand cutting direction Compatible with 16 ER inserts 25 mm shank diameter 200 mm overall length Precision compatibility for repeatable internal turning This toolholder combines an ISO designation of S25R STIL with a compact 25 mm shank, offering a balanced solution for internal turning operations where repeatable positioning matters. The ER16 clamping standard ensures secure retention of the cutting head and simplifies tool changes when exchanging indexable inserts. By choosing a holder built for standardised insert systems, preparation time is reduced and reproducibility is improved, which helps maintain cycle-time stability in small-batch and series production. Rigidity and setup benefits that save time on the shopfloor With a 200 mm overall length and a body diameter of 29 mm, the design provides a compromise between reach and stiffness. The 40 mm cutting height delivers adequate engagement for common insert geometries while the tool’s modest mass of 0.762 kg makes handling and spindle load predictable. These attributes translate into fewer repeat setups and reduced vibration risk, so processes run more smoothly and allow reliable surface finishes even when operators have varying experience levels. Left-hand orientation explained and its practical advantages Left-hand cutting orientation means the cutting action is directed towards the left when viewed from the spindle, a necessary configuration for specific internal turning strategies and certain CNC program routines. This orientation is particularly useful when machining internal bores from one direction without reversing tool rotation or when matching the geometry of a left-hand insert. For workshops adapting existing toolpaths, selecting the correct orientation avoids unnecessary reprogramming and keeps production continuous. Workshop versatility and quality assurance for trade professionals Designed for compatibility with 16 ER insert systems, this holder supports fast insert indexing and replacement, reducing downtime in maintenance cycles. As part of a pragmatic toolkit, it offers a clear upgrade path for precision-focused workshops that require standard interfaces and dependable mechanical clamping. The product aligns with Metav’s focus on accessible precision: a supplier network that supports reliable supply, straightforward logistics and a quality filter that helps procurement teams minimise risk. For left-hand internal turning tasks choose the Teknik Cutting Tools STI boring bar and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: K363TM Manufacturer: Teknik Makina Description: STI for IR/ER Indexable Inserts boring bar ISO designation: S25R STIL Clamping: ER16 Core specifications Shank diameter: 25 mm Overall length: 200 mm Diameter: 29 mm Cutting height: 40 mm Weight: 0.762 kg Materials & features Left-hand cutting direction Compatible with 16 ER indexable inserts Designed for internal turning applications ER16 collet/clamp interface FAQ What insert systems fit this toolholder? The STI toolholder is compatible with 16 ER indexable inserts and is intended for IR/ER-style insert geometries. Is the orientation left-hand or right-hand? This holder is manufactured for left-hand cutting, suited to internal turning routines requiring that orientation. What are the key mounting dimensions? Key dimensions include a 25 mm shank diameter, 200 mm overall length and a 29 mm body diameter, which inform rigidity and reach considerations. Can this be used for heavy interrupted cuts? The design targets stable internal turning; however, suitability for interrupted cuts depends on machine power, fixture rigidity and the selected insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the indexable insert design, robust clamping and straightforward insert compatibility to keep cycle times low and maintenance predictable; order the tool directly via Metav Werkzeuge or consult the technical team for application support. Indexable Insert Drill U729TM – 29 mm diameter, 25 mm shank, by Teknik Makina The Indexable Insert Drill U729TM is a heavy-duty drill body intended for precision holemaking with replaceable SPMG 0904 inserts, suited to machining centres and CNC drilling stations. High-stability 25 mm shank for secure clamping 29 mm nominal diameter for large holemaking 116 mm cutting length for deeper bore capacity Compatible with SPMG 0904 indexable inserts Boost throughput with stable, indexable drilling The indexable insert drill design reduces non-productive time by allowing quick insert changes while maintaining cutting performance. With a 29 mm diameter and 116 mm cutting length, the tool supports extended depth capacity without necessitating multiple operations. The replaceable SPMG 0904 inserts permit economical reconditioning of the cutting edge and predictable machining costs, making the system attractive where uptime and tool-change speed directly affect throughput. Secure clamping for consistent hole quality A robust 25 mm shank and a clamping length of 56 mm are engineered to deliver axial rigidity and minimise runout during drilling. The controlled tool mass of 0.646 kg contributes to balanced rotation and reduced vibration, so the drilling system produces repeatable bore geometry and surface condition. These mechanical characteristics help sustain dimensional accuracy across production runs and support stable cutting conditions for indexable insert operations. Seamless integration with insert systems and workshop logistics Compatibility with established insert manufacturers such as Taegutec and YG-1 simplifies procurement and spare-part logistics, as the tool accepts common SPMG 0904 indexable plates. The overall length of 200 mm and a defined clamping interface ensure straightforward fitting into standard toolholders and collets. For workshops seeking consolidated supply and reliable delivery, Metav Werkzeuge provides order and advisory services to align insert selection and delivery schedules with production demands. Contact Metav Werkzeuge for tailored advice on using the Teknik Makina U729TM indexable insert drill and to arrange compatible SPMG 0904 inserts, delivery options or machining recommendations Technical data Article number: U729TM Manufacturer: Teknik Makina Product: Indexable insert drill (Vollbohrer) Diameter: 29 mm Cutting length: 116 mm Overall length: 200 mm Shank diameter: 25 mm Clamping length: 56 mm Weight: 0.646 kg Compatible insert type: SPMG 0904 Compatible insert manufacturers: Taegutec, YG-1 SKU: U729TM FAQ Which insert type fits this drill body? The U729TM accepts SPMG 0904 indexable inserts; suppliers such as Taegutec and YG-1 provide suitable plates for this tool body. What are the key dimensions to check for toolholder compatibility? Verify the 25 mm shank diameter, the 56 mm clamping length and the 200 mm overall length to ensure the U729TM fits the intended holder. How deep can holes be made in a single operation? With a 116 mm cutting length, the drill body permits deeper bore capacity than short-flute alternatives, enabling fewer setups for extended holes. Is this drill body suitable for CNC machining centres? Yes, the U729TM is designed as an indexable insert drill body for use in CNC drilling and machining operations where insert changeability and stable clamping are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise holemaking through a compact combination of robust clamping, a 29 mm cutting diameter and fast indexable-insert changes; this improves throughput and reduces setup time. Order the Indexable Drill U929TM directly via Metav Werkzeuge or ask our consultants if needed. Indexable Drill U929TM by Teknik Makina — 29 mm diameter, compatible with SPMG 0904 inserts Indexable Drill U929TM is designed for efficient holemaking in standard machining applications, featuring a secure 25 mm shank and a 58 mm cutting length for reliable tool setup and repeatable results. 29 mm diameter for standard hole sizes 25 mm shank for secure clamping Compatible with SPMG 0904 indexable inserts Lightweight 0.535 kg to reduce spindle load Consistent hole quality through precise tool geometry The tool is engineered to deliver repeatable bore tolerances by combining a defined 29 mm diameter with a controlled cutting length of 58 mm. The measured overall length of 142 mm and the compact 25 mm shank make the unit straightforward to set up in common toolholders while preserving spindle clearance. These controlled dimensions reduce the need for excessive trial cuts and enable predictable cycle times on production runs, which is particularly valuable for jobbing shops and volume machining where reproducibility is critical. Faster machining cycles with indexable inserts Designed around an indexable-insert concept, the drill accepts SPMG 0904 inserts, enabling quick edge changes without regrinding. Compatibility with insert suppliers such as Taegutec and YG-1 supports flexible sourcing and cost control for spare inserts. The indexable approach shortens downtime and lowers per-hole tooling costs compared with full regrind workflows, so process engineers can plan maintenance windows more efficiently and maintain steady throughput. Secure clamping and reduced spindle load for stable cutting A 25 mm shank ensures firm clamping in standard chucks or holders, improving concentricity and minimising runout. At a tool mass of 0.535 kg, the assembly keeps spindle loads moderate, which helps to extend bearing life and maintain machining stability at higher feed rates. The balance between rigidity and weight supports consistent chip evacuation and stable cutting conditions, contributing to longer insert life and fewer unexpected interruptions. Practical setup data for quick integration into tool lists Key dimensions—29 mm diameter, 58 mm cutting length, 25 mm shank and 142 mm overall length—are suitable for quick entry into tool management systems and NC setups. The tool’s design for SPMG 0904 inserts simplifies purchasing and inventory decisions, as compatible indexable plates from recognised manufacturers are readily available. For complex setups or mixed-machine fleets, this clarity in specification makes it simple for tool prescribers and operators to match holder types and program offsets, reducing the likelihood of tooling errors. For reliable supply and technical advice on the Teknik Makina U929TM indexable drill (29 mm), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: U929TM Manufacturer: Teknik Makina Product: Indexable drill (Vollbohrer) Numbers / Core technical data Diameter: 29 mm Overall length: 142 mm Cutting length: 58 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.535 kg ECLASS: 21180201 Designs / Special features Compatible insert type: SPMG 0904 Suitable insert suppliers: Taegutec, YG-1 Indexable-insert concept for quick edge replacement Compact design for standard toolholders FAQ Which insert type is required for this drill? The tool uses SPMG 0904 indexable inserts; compatible inserts from Taegutec and YG-1 are suitable for the Indexable Drill U929TM. What are the essential dimensions for programme entry? Key dimensions: diameter 29 mm, cutting length 58 mm, overall length 142 mm, shank 25 mm — use these values for offsets and tool lists when setting up the U929TM. What shank size is recommended for clamping? A 25 mm shank is specified for secure clamping; ensure the holder or chuck accepts 25 mm shanks for stable machining with the U929TM. Are inserts included with the tool? Insert supply is handled separately; the drill body accepts SPMG 0904 plates which should be ordered to match the U929TM. Which machines are compatible with this drilling tool? Machines that accept a 25 mm shank and are set up for indexable-insert drilling are compatible; confirm toolholder and spindle clearance against the U929TM dimensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of 29 mm diameter, 87 mm cutting length and SPMG 0904 insert compatibility to reduce tooling costs and maintain steady production flow; order directly via Metav Werkzeuge or consult the advisors for application support. Indexable insert drill U829TM — Teknik Cutting Tools precision drilling, 29 mm diameter Indexable insert drill U829TM for industrial drilling operations, compatible with triangular SPMG 0904 inserts and suited to CNC toolholders 29 mm diameter for standard bores 87 mm effective cutting length Compatible with SPMG 0904 inserts 25 mm shank diameter, secure clamping Efficient, cost-conscious drilling for production environments The indexable insert design delivers clear economic advantages for batch production: replaceable inserts mean fewer full-tool changes and a lower cost per hole compared with solid tools. With an 87 mm cutting length and 29 mm diameter, the tool provides a reliable balance between reach and rigidity, supporting stable chip formation and consistent hole quality. Compatibility with recognised insert lines such as SPMG 0904 (suitable from manufacturers Taegutec and YG-1) ensures flexible stocking and quick reconditioning, which keeps spindle downtime to a minimum and production lines running smoothly. Stable clamping and practical dimensions for workshop reliability A 25 mm shank with a 56 mm shank length provides a secure grip in standard toolholders, improving concentricity and reducing vibration during operation. The 171 mm overall length is engineered to offer practical access for deeper bores while maintaining sufficient overhang control to protect tool life. At 0.58 kg, the assembly minimises spindle load and inertia without compromising rigidity, which supports repeatable bore tolerances and extends component life in high-output environments. Simple maintenance, broad compatibility and application advice The drill accepts SPMG 0904 indexable inserts, which simplifies maintenance cycles: worn inserts are changed in seconds, returning the tool to productive duty without specialist regrinding. Compatibility with insert lines from Taegutec and YG‑1 allows procurement choices based on availability or coating requirements. For planners and buyers, this combination of indexable toolholding, compact mass and industry-standard insert compatibility translates into lower total cost of ownership and easier process planning in CNC drilling applications. Contact Metav Werkzeuge for Teknik Cutting Tools indexable drills — expert advice and rapid dispatch from Emmerich for reliable workshop supply Technical Data Article number: U829TM Manufacturer: Teknik Makina Facts Diameter: 29 mm Overall length: 171 mm Cutting length: 87 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.58 kg ECLASS: 21180201 Special features Compatible insert: SPMG 0904 Compatible insert manufacturers: Taegutec, YG-1 Indexable insert drill configuration Files available for reference (migration IDs included) FAQ Which inserts fit this indexable drill? The drill is specified for SPMG 0904 inserts; compatible grades from Taegutec and YG‑1 are commonly used with the U829TM. What drilling depth is achievable with this tool? With a cutting length of 87 mm and an overall length of 171 mm, the tool supports medium-depth bore operations while maintaining rigidity. Is the shank suitable for standard toolholders? The 25 mm shank diameter and 56 mm shank length are intended for secure clamping in conventional holders, improving concentricity for repeatable results. How does insert replacement affect production time? The indexable concept reduces downtime: worn SPMG 0904 inserts are replaced quickly, restoring cutting performance without full-tool replacement or regrinding. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of deep-hole capability and secure clamping for uninterrupted production: the drill's Ø 29 mm diameter with a 116 mm cutting length enables stable, deeper bores while the 25 mm shank ensures reliable chucking. Order the drill directly via Metav Werkzeuge or ask our consultants for application advice. Solid drill U626TM — indexable drill body, Ø 29 mm, 200 mm overall length (Teknik Makina) A U626TM solid drill engineered for metalworking applications, offering deep-hole capacity with compatibility for Korloy WCM-0503 indexable inserts. Robust 29 mm diameter body 116 mm cutting length for deep holes 25 mm shank for secure clamping Consistent deep-hole performance for stable cycles The design provides a 116 mm cutting length within a 200 mm overall length, delivering the reach required for many through-hole and deep-pocket operations. That extended cutting zone reduces the need for multiple tool changes and supports fewer interruptions on the machine, which in turn improves process throughput. The combination of length and diameter is aimed specifically at avoiding flex and chatter during continuous runs, so production remains steady and predictable. Secure tool holding and precise positioning A 25 mm shank and a 56 mm shank length ensure firm clamping in standard toolholders and reduce axial play during machining. Reliable clamping is essential for repeatable bore quality; by stabilising the tool, the design reduces runout and optimises hole geometry. The resulting improvement in concentricity means fewer rejected parts and less rework, which is particularly relevant when producing precision components to tight tolerances. Cost-effective machining through insert compatibility Compatibility with WCM-0503 indexable inserts from Korloy allows economical regrinding cycles to be replaced by simple insert changes. This approach lowers per-hole tooling costs and shortens maintenance time compared with full-tool replacement. Using standardised inserts also simplifies inventory management and helps achieve consistent cutting performance across batches — a practical advantage for workshops and production shops aiming to control operating expenses without compromising quality. Built for workshop reliability and straightforward inspection With a measured weight of 0.68 kg and a compact but robust body, the tool balances rigidity with handling convenience for set-up and inspection tasks. The component's measurable metrics (diameter, cutting length, shank dimensions) support quick quality checks and documentation during incoming inspection or tool-room audits. Clear, verifiable specifications help integrate the part into tool lists and ERP systems without ambiguity. Contact Metav Werkzeuge for tailored advice on Teknik Makina indexable drill bodies and secure the U626TM for reliable deep-hole drilling — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: U626TM Manufacturer: Teknik Makina Type: Solid drill / indexable drill body Facts Diameter: 29 mm Overall length: 200 mm Cutting length: 116 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.68 kg Special features Compatible with WCM-0503 indexable inserts Suitable insert manufacturer: Korloy Designed for metalworking deep-hole operations FAQ What inserts are compatible with this drill? The drill accepts WCM-0503 indexable inserts; the body is specified to work with Korloy WCM-0503 cutting inserts for straightforward replacement and consistent cutting performance. Which materials can be machined with this indexable drill body? The U626TM is intended for general metalworking applications; insert selection and cutting data should be matched to the workpiece material to achieve optimal results. How deep can this drill cut in one pass? The tool provides a 116 mm cutting length, which defines the maximum effective cutting depth in a single operation; actual axial engagement should follow the chosen insert manufacturer's recommendations. Is the shank suitable for standard collet or hydraulic chucks? The 25 mm shank and 56 mm shank length are compatible with standard toolholders; selection of the appropriate holder type depends on the machine and precision requirements. How does indexable insert use affect running costs? Using replaceable WCM-0503 inserts reduces the cost per cutting edge by avoiding full-tool replacement and minimises downtime for reconditioning, improving overall machining economy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the practical combination of durable construction, straightforward insert replacement and precise holemaking for efficient production. Order the indexable insert drill directly via Metav Werkzeuge or ask our consultants if needed. Indexable Insert Drill – high-performance insert drill, Ø 29 mm, 25 mm shank (Teknik Makina) The Indexable Insert Drill is designed for precision drilling with replaceable Korloy inserts in industrial CNC and workshop applications Ø 29 mm cutting diameter 25 mm shank for standard toolholders 145 mm cutting length for deeper holes Compatible with Korloy WCM-0503 inserts Reliable hole quality with replaceable inserts The primary benefit of an indexable insert drill lies in consistent hole quality while reducing tooling costs. The design accepts Korloy WCM-0503 inserts so cutting edges can be exchanged quickly instead of replacing the entire tool, which lowers downtime and inventory expense. With a 25 mm shank and a robust body, the tool delivers stable clamping and repeatable concentricity, enabling uniform results across production batches. Efficient deep-hole performance for CNC operations Optimised for longer engagement, the tool’s 145 mm cutting length and overall length 229 mm permit deeper holemaking without frequent tool changes. This configuration supports higher material removal per tool life, improving process efficiency on lathes and milling machines equipped for indexable drills. The balanced geometry promotes effective chip evacuation and steady feed rates, which translates to faster cycle times and reduced secondary finishing. Practical integration and workshop advantages Compatibility with a recognised insert family simplifies stocking and process planning: the insert type accepted is WCM-0503, supplied by Korloy. The tool’s moderate weight of 0.76 kg and standard shank dimensions make it straightforward to mount into common toolholders, while the replaceable-insert concept delivers low running costs compared with one-piece drills. For engineering teams, this means predictable maintenance intervals and straightforward quality checks, supporting smoother production management. Contact Metav Werkzeuge in Emmerich for tailored application advice and to arrange supply of the Teknik Makina indexable insert drill with compatible Korloy inserts Technical data Article number: U789TM Manufacturer: Teknik Makina Diameter: 29 mm Shank diameter: 25 mm Cutting length: 145 mm Shank length: 56 mm Overall length: 229 mm Weight: 0.76 kg Compatible insert manufacturer: Korloy Compatible insert type: WCM-0503 Indexable insert concept Standard shank for conventional holders FAQ What insert type does the drill use? The drill accepts Korloy WCM-0503 indexable inserts; the modular concept allows rapid insert replacement to restore cutting performance. Which shank size should the toolholder accommodate? A 25 mm shank is required; the drill is specified with a 25 mm shank diameter for standard clamping systems. Is the tool suitable for deep holes? Yes, with a 145 mm cutting length and overall length of 229 mm the design supports deeper holemaking without frequent tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of durable indexable design, straightforward insert replacement and precise holemaking for efficient production. Order the component through Metav Werkzeuge or request technical advice for seamless integration. Vollbohrer (Indexable drill) by Teknik Makina — 29 mm diameter, WCM‑0503 inserts Vollbohrer presented as an indexable drill for reliable holemaking in production and workshop environments Indexable design for fast insert replacement Compatible with WCM‑0503 inserts (Korloy) 29 mm diameter, 87 mm cutting length 25 mm shank, 171 mm overall length High-performance drilling for consistent production results This indexable drill is engineered to deliver repeatable hole quality and stable process performance. With a 29 mm nominal diameter and an 87 mm cutting length, the tool provides an effective balance between reach and rigidity, reducing deflection during machining. The tool’s geometry supports predictable chip formation and consistent entry/exit behaviour, which helps maintain cycle times and reduces rework. Choosing an indexable solution also lowers tooling overhead because only the inserts require periodic replacement, not the entire body. Practical compatibility and easy maintenance for workshop efficiency Designed with a 25 mm shank and a 171 mm overall length, the holder ensures secure clamping in common toolholders and collets. The drill accepts WCM‑0503 inserts, compatible with Korloy specifications, enabling rapid index changes and straightforward inventory management of cutting edges. At 0.617 kg, the component is light enough for safe handling while offering sufficient mass for stable machining. The insert-based concept simplifies maintenance routines: worn edges are exchanged quickly, restoring cutting performance with minimal downtime. Proven supply and dependable service for professional users Sourcing this indexable tool from a reliable partner means fewer procurement risks and steady access to high-precision consumables. Teknik Makina’s component is suitable for standard production runs and retrofit applications where a robust, serviceable drill is required. Combined with Metav Werkzeuge’s broad product range and logistical experience, the solution supports uninterrupted workshop operation and straightforward restocking. For buyers seeking measurable improvements in machining uptime and tool utilisation, this tool contributes to consistent process economics and predictable output quality. For procurement or application guidance on Teknik Cutting Tools products such as this indexable drill, contact Metav Werkzeuge for personalised advice and assured supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: U168TM Manufacturer: Teknik Makina Product: Vollbohrer (indexable drill) Facts Diameter: 29 mm Overall length: 171 mm Cutting length: 87 mm Shank diameter: 25 mm Shank length: 56 mm Weight: 0.617 kg Special features Insert type: WCM‑0503 Compatible inserts manufacturer: Korloy Indexable design for insert replacement Suitable for standard toolholder clamping FAQ What inserts fit this drill and from which supplier are they compatible? The drill accepts WCM‑0503 inserts; compatibility is specified for Korloy-type cutting inserts to ensure proper seating and cutting geometry. Which dimensions should be considered when selecting a holder for this tool? Important dimensions include the 25 mm shank diameter and 171 mm overall length, which determine holder selection and required clearance. How much cutting length is available for through-hole operations? The tool provides an 87 mm cutting length, offering a balance between reach and rigidity for many through-hole and deep-hole tasks. Is this tool heavy to handle during setup? Weighing 0.617 kg, the component is manageable for manual handling and mounting while remaining substantial enough for stable machining. What identification helps when reordering the same item? Use the article number U168TM and reference the indexable design with WCM‑0503 inserts to ensure consistent replacement and reordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust combination of a 29 mm cutting diameter, 58 mm cutting length and a rigid 25 mm shank that delivers stable holemaking and repeatable results; order the indexable drill body from Metav Werkzeuge or consult our specialists for application support. Indexable drill body by Teknik Makina — 29 mm Ø, 58 mm cutting length The Indexable drill body is a purpose-built drilling solution for medium-depth holemaking in industrial machining, compatible with Korloy WCM-0503 indexable inserts. 29 mm cutting diameter for larger bores 58 mm effective cutting length 25 mm cylindrical shank for solid clamping Compatible with Korloy WCM-0503 inserts Stable bore geometry for consistent production The tool’s design prioritises consistent hole geometry, with a 29 mm nominal diameter and a 58 mm cutting length that together reduce run-out and positional variance in repetitive drilling tasks. The effective cutting length refers to the portion of the tool engaging the workpiece; a clearly defined cutting length helps plan depth passes and minimise unexpected tool overload. By focusing on dimensional stability, the drill body supports predictable cycle times in component production and simplifies downstream processing that depends on accurate hole location. Secure clamping and compact overall design A 25 mm shank diameter paired with a 142 mm overall length provides a rigid connection to standard toolholders, limiting vibration during heavy cuts. The compact construction and a mass of 0.515 kg keep centrifugal load low while retaining the stiffness necessary for repeatable machining. Compatibility with Korloy WCM-0503 inserts means insert changes are quick and unambiguous, and the component is produced by Teknik Makina to fit industrial workflows where clamping reliability is essential. Efficiency gains through indexable inserts Using indexable inserts reduces tool change frequency and simplifies maintenance: only the worn insert is replaced, not the entire drill body. This approach leads to reduced downtime and a lower cost per hole in serial operations, particularly where insert stock is readily available. The body is suited to workshop and production settings that value fast reconditioning and predictable tooling lifecycle; planners can schedule insert rotations instead of complete tool swaps, improving machine utilisation. Contact Metav Werkzeuge for tailored application advice and procurement of the Teknik Makina indexable drill body U126TM, compatible with Korloy WCM-0503 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: U126TM Manufacturer: Teknik Makina Diameter: 29 mm Overall length: 142 mm Cutting length: 58 mm Shank diameter: 25 mm Shank length: 56 mm Compatible inserts: WCM-0503 Compatible insert manufacturer: Korloy Weight: 0.515 kg Numbers / Core technical data Ø 29 mm Cutting length 58 mm Shank Ø 25 mm Shank length 56 mm Overall length 142 mm Weight 0.515 kg Special features Indexable drill body design Compatibility with Korloy WCM-0503 inserts Compact and rigid geometry for stable holemaking FAQ Which insert type fits this drill body? The drill body accepts Korloy WCM-0503 indexable inserts; compatibility is specified for the body to ensure correct seating and cutting geometry. What is the shank diameter and is it suitable for standard toolholders? The tool has a 25 mm shank diameter, providing a secure interface for standard clamping systems and resisting vibration under normal drilling conditions. What lengths are relevant for planning drilling depth? Use the 58 mm cutting length to define the maximum effective engagement in the workpiece and the 142 mm overall length to check clearance and holder compatibility. Is the product identified by a stock code? Yes, the item is listed as U126TM, which can be used when enquiring or ordering the Teknik Makina indexable drill body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com