Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of rigid shank design and precise indexable-insert compatibility for consistent turning results; the 25 mm shank and 32 mm head diameter provide stability while the tool accepts WNMG 0804 inserts for versatile finishing. Order the Teknik Makina boring bar directly via Metav Werkzeuge or consult their advisors for application-specific recommendations. PWLN for WNMG Indexable Inserts boring bar by Teknik Makina — right-hand, 32 mm head A robust PWLN for WNMG Indexable Inserts boring bar intended for right-hand turning operations, compatible with WNMG 0804 inserts and designed for stable, repeatable metalcutting in workshop and production environments. 25 mm shank diameter for high rigidity Compatible with WNMG 0804 indexable inserts 95° cutting angle for profile accuracy Stable performance for indexable-insert turning The design focuses on delivering consistent cut quality when used with indexable turning inserts. The tool accepts WNMG 0804 inserts, which are a common format for finishing and general turning, enabling predictable geometry and repeatable results. The specified 95° cutting angle supports profile work and controlled tool engagement, reducing the need for extensive rework. This compatibility simplifies tooling logistics and helps maintain a steady production flow with established insert grades. Rigidity and toolholding that reduce vibration A 25 mm shank diameter paired with a 32 mm head diameter gives the bar improved stiffness compared with smaller-shank alternatives. Greater rigidity translates to less chatter, better surface finish and longer insert life under comparable cutting conditions. The tool’s mass of 0.911 kg contributes to stable cutting dynamics without excessive overhang, which is beneficial during medium- to light-duty turning cycles on conventional and CNC lathes where repeatable dimensional accuracy matters. Practical integration and predictable handling With an overall length of 250 mm and the ISO designation S25S PWLNR, the boring bar is straightforward to identify and mount in common toolposts and turret systems. The right-hand cutting direction conforms to typical lathe setups and cutting strategies, so adaptations are minimal. The combination of standard ISO labelling and WNMG insert compatibility supports quick insert changes and predictable tool indexing, reducing downtime and keeping throughput steady in both jobbing and batch production. Contact Metav Werkzeuge for application-specific advice on Teknik Makina boring bars and ensure the right clamping and insert choice for reliable workshop performance Technical data Article number: P360TM Manufacturer: Teknik Makina Name: PWLN for WNMG Indexable Inserts ISO designation: S25S PWLNR Weight: 0.911 kg Facts Diameter: 32 mm Shank diameter: 25 mm Cutting edge height: 50 mm Overall length: 250 mm Cutting angle: 95° Special features Right-hand cutting direction For WNMG 0804 indexable inserts PWLN geometry for insert turning FAQ What inserts fit this boring bar? The boring bar is specified for WNMG 0804 indexable inserts; Teknik Makina's PWLN geometry and the ISO designation S25S PWLNR ensure correct seating for that insert format (SKU P360TM). Is the bar suitable for CNC turret use? Yes — the bar’s 25 mm shank and 250 mm overall length are compatible with standard turret and toolpost clamping; the design supports stable cutting when securely mounted. What does the 95° cutting angle mean in practice? A 95° cutting angle provides a near-neutral approach suitable for profile turning and finishing; this geometry helps maintain dimensional stability when using WNMG 0804 inserts on the PWLN toolholder. Can the bar be used for heavy roughing cuts? The PWLN boring bar is optimised for rigidity and finishing operations with indexable inserts; for heavy roughing, assessment of insert grade and machine power is recommended before use with the Teknik Makina PWLN boring bar (P360TM). How does the shank diameter affect performance? The 25 mm shank diameter increases stiffness compared with smaller shanks, reducing deflection and vibration for improved surface finish and longer insert life on both manual and CNC lathes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable, indexable‑insert system combined with a compact 25 mm shaft and a 200 mm overall length for consistent bore quality and efficient machining; order the tool directly via Metav Werkzeuge or ask our consultants for application advice. S25R ST‑CR boring bar — for TC-- 16T3 indexable inserts, shaft Ø 25 mm A robust S25R ST‑CR boring bar designed for right‑hand cutting operations, compatible with TC-- 16T3 indexable inserts for precise internal turning and finishing in production and workshop environments. Right‑hand cutting direction Shaft diameter 25 mm for rigid support For TC-- 16T3 indexable inserts Consistent bore quality through proven insert compatibility The combination of a 25 mm shaft and compatibility with TC-- 16T3 indexable inserts provides a predictable machining setup that reduces variability between batches. The tool's 50 mm cutting height and 60° cutting angle are coordinated to deliver uniform chip formation, which in turn improves surface finish and repeatability. For production environments where cycle‑to‑cycle consistency matters, this indexable‑insert arrangement simplifies tool changes and inventory management while maintaining a high level of machining accuracy. Stable shank and balanced geometry for reduced vibration A compact overall length of 200 mm together with a 32 mm diameter profile and a mass of 0.772 kg contributes to the bar's inherent stability. Reduced overhang limits deflection and vibration, which leads to better concentricity and longer insert life. The mechanical balance and firm clamping reduce the need for additional damping measures, so operators and CNC programmers can expect fewer rejects and longer uninterrupted cutting sequences in both prototype and serial runs. Efficient chip control and reduced downtime Engineered for indexable inserts, the system allows rapid replacement of cutting edges without full tool withdrawal, improving uptime in the workshop. The right‑hand cutting orientation aligns with common lathe setups, enabling straightforward integration into existing processes. By using standardised indexable inserts, tooling costs can be optimised: worn edges are replaced instead of the entire tool, which supports predictable maintenance cycles and cost‑efficiency in the medium to long term. Practical integration, handling and workshop benefits The boring bar's S25R ST‑CR designation reflects its ISO‑style mounting and compatibility with common clamp holders, including the nominal clamp designation 16. This makes tool changeovers and inventory control simpler for procurement and floor staff. Metav's emphasis on accessible precision means that suppliers and smaller workshops benefit from a product filtered for European quality standards and supported from the Emmerich hub. For further clarification on selection or suitability for specific materials and setups, technical advice is available. For a reliable upgrade to internal turning performance, contact Metav Werkzeuge for tailored advice and to arrange procurement of the Teknik Makina S25R ST‑CR boring bar from our Emmerich hub. Technical Data SKU: K183TM Model: S25R ST‑CR Brand: Teknik Makina For inserts: TC-- 16T3 Core dimensions Shaft diameter: 25 mm Tool diameter: 32 mm Cutting height: 50 mm Overall length: 200 mm Cutting angle: 60° Weight: 0.772 kg Cutting direction: right Compatibility & features Compatible with TC-- 16T3 indexable inserts Clamp designation: 16 Indexable‑insert system for quick edge changes FAQ What insert type is required for this boring bar? The boring bar is designed for TC-- 16T3 indexable inserts, ensuring standardised replacement and predictable cutting behaviour. Is the bar suitable for right‑hand turning only? Yes, the tool features a right‑hand cutting orientation as specified in the product data. What are the key dimensions to check before ordering? Check the shaft diameter (25 mm), overall length (200 mm) and the cutting height (50 mm) to ensure compatibility with the machine tool and clamp holder. How does the bore finish benefit from this design? A compact, well‑balanced shank and a 60° cutting angle contribute to reduced vibration and consistent chip evacuation, which together improve bore surface quality. Can the bar be integrated into existing toolholders? The bar uses a standard S25R ST‑CR mounting style and a clamp designation of 16, which allows integration into compatible holders and existing setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, ISO‑specified tooling solution that combines stable clamping, compatibility with standard indexable inserts and consistent performance across repetitive turning tasks — order directly via Metav Werkzeuge or consult the technical team for application advice. K428TM Boring Bar (S25S MWLNR) – right‑hand, for WN-- 0804 indexable inserts, 25 mm shank The K428TM is a right‑hand boring bar intended for turning operations with WN-- 0804 indexable inserts, providing a compact toolholder for medium‑depth internal and external turning tasks Right‑hand boring bar for turning operations Accepts WN-- 0804 indexable inserts 25 mm shank diameter for stable clamping 250 mm overall length for deeper reach Consistent rigidity and geometry for repeatable finishing The design centres on a 25 mm shank that delivers dependable clamping rigidity, reducing vibration and improving surface results during repeated cycles. With the S25S MWLNR ISO designation, the toolholder conforms to widely used tooling standards, which simplifies integration with existing setups and shortens changeover times. The defined 95° cutting angle helps maintain predictable chip flow and tool engagement, supporting consistent dimensional accuracy and lower rework rates. Flexible insert compatibility for varied turning tasks Compatibility with WN-- 0804 inserts and the MWLN insert type allows straightforward selection of grades and coatings for specific materials. The cutter’s 45 mm cutting height supports a stable insert seat, which contributes to predictable wear behaviour and extended insert life when paired with appropriate grades. Right‑hand cutting orientation offers clear toolpath planning for conventional lathe setups, enabling effective finishing passes without compromise to feed control. Reach and balance tailored to workshop efficiency At a 250 mm overall length, the boring bar combines reach with a compact profile that reduces overhang and preserves balance during operation. The assembly’s mass (approx. 0.945 kg) is optimised to avoid unnecessary inertia while still offering tactile stability on the toolpost. This balance supports safer, more precise movement in medium‑depth bores and external facing tasks, reducing manual adjustments and downtime between setups. For bespoke applications or uncertainty about fitment, in‑house specialists can advise on clamping adapters and holder compatibility. For application guidance or to specify tooling for a particular machining task, contact Metav Werkzeuge — our consultants provide practical advice from Emmerich and can recommend the correct holder and insert pairing for reliable results. Technical Data Article number: K428TM Manufacturer: Teknik Makina SKU: K428TM Facts Shank diameter: 25 mm Overall length: 250 mm Cutting height: 45 mm Weight: 0.945 kg Diameter: 32 mm Cutting angle: 95° Special features Compatible inserts: WN-- 0804 ISO designation: S25S MWLNR Cutting direction: right Suitable for: MWLN for WN-- indexable inserts Clamping holder designation: 08 FAQ Which inserts fit this boring bar? The K428TM is intended for WN-- 0804 indexable inserts and supports the MWLN insert form for reliable seating and exchange. What are the key dimensions to check for holder compatibility? Key dimensions are a 25 mm shank diameter, 250 mm overall length and a cutting height of 45 mm; these determine clamp fit and effective reach for the K428TM boring bar. Is the cutting direction suitable for common lathe setups? Yes, the tool is manufactured for right‑hand cutting and a 95° cutting angle, matching conventional lathe orientations for typical turning operations. Does the tool conform to an ISO designation? The boring bar carries the S25S MWLNR ISO designation, facilitating compatibility with standardised holders and simplifying tool selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Einschraubfräser für RDMT 1003 Wendeplatten Einschraubfräser mit Innenkühlung für präzise Aufnahme von RDMT 1003 Wendeplatten und kompakte Montage über M16 Gewinde Innenkühlung für bessere Spanabfuhr 32 mm Durchmesser für stabile Aufnahme M16 Gewinde, Einschraubtiefe 24,5 mm 3 Schneiden, Schneidenhöhe 35,5 mm Sichere Klemmung mit Torx Schraube M3,5x8,5 Höhere Prozesssicherheit durch integrierte Innenkühlung Der Einschraubfräser überzeugt durch seine Innenkühlung, die direkt an der Schneidzone für effiziente Kühlung und verbesserte Spanabfuhr sorgt. Weil Kühlschmierstoff punktgenau zur Schneide geleitet wird, reduziert sich die Wärmeentwicklung deutlich, was zu stabileren Schnittbedingungen und längeren Standzeiten führt. Die Kombination aus 32 mm Durchmesser und 3 Schneiden gewährleistet eine ausgewogene Schnittkraftverteilung und gleichmäßigen Verschleiß. Flexible Bestückung mit RDMT 1003 Wendeplatten Das Werkzeug ist speziell auf RDMT 1003 Wendeplatten abgestimmt und ermöglicht schnellen Wechsel der Schneidplatten ohne Anpassungen am Halter. Die klare Auswahl an Standardplatten vereinfacht die Ersatzteilbeschaffung und reduziert Rüstzeiten. Für die spanende Bearbeitung bleibt so mehr Zeit für die Feinabstimmung von Schnittdaten und Prozessparametern, während die mechanische Schnittstelle über das M16 Gewinde stabile und wiederholgenaue Aufnahmen sichert. Montage und Wartung einfach umgesetzt Die Montage erfolgt über das M16 Gewinde mit einer Einschraubhöhe von 24,5 mm, was eine sichere Verbindung zur Aufnahme erzeugt. Für die Plattenbefestigung wird die Torx Schraube M3,5x8,5 verwendet; empfohlenes Werkzeug: Torx Schlüssel T15. Durch diese standardisierte Verbindung sind Nachmontage und regelmäßige Kontrollen schnell durchführbar, was Rüst- und Stillstandszeiten minimiert. Regelmäßige Sichtprüfung der Schneidkante und kontrollierte Kühlmittelführung verlängern die Nutzungsdauer. Konstruktion und Maße für effiziente Bearbeitung Mit einer Gesamtlänge von 60 mm und einer Schneidenhöhe von 35,5 mm bietet dieses Werkzeug eine kompakte Bauform bei ausreichend Eingriffstiefe. Die klare mechanische Geometrie erleichtert die Integration in vorhandene Werkzeugaufnahmen und sorgt für konstante Schneidenpositionen. Durch die drei Schneiden entsteht eine gute Balance zwischen Spanvolumen und Oberflächengüte, was sich positiv auf Werkstückqualität und Produktionsstabilität auswirkt. Hinweise zur Anwendung und Beschaffung Die Montagefreundlichkeit und die Innenkühlung machen dieses Werkzeug zur sinnvollen Wahl, wenn es auf konstante Schnittbedingungen und kurze Rüstzeiten ankommt. Bei Fragen zur Auswahl passender RDMT 1003 Platten oder zur Optimierung der Schnittwerte steht Metav mit technischer Beratung zur Verfügung. Artikelbezeichnung im Lager: VT103-1TM; Hersteller: Teknik Makina Empfehlung: Für zuverlässige Zerspanung mit RDMT 1003 Wendeplatten direkt bei Metav Werkzeuge anfragen – eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: VT103-1TM Bezeichnung: Einschraubfräser für RDMT 1003 Wendeplatten Marke: Teknik Makina Produktart: Einschraubfräser Fakten Durchmesser: 32 mm Gesamtlänge: 60 mm Schneidenhöhe: 35,5 mm Einschraubgewinde Höhe: 24,5 mm Schneidenzahl: 3 Gewicht: 0,188 kg Besonderheiten Innenkühlung — Kühlschmierstoffzufuhr direkt an der Schneide Gewinde: M16 Für Wendeplatten: RDMT 1003 Torx Schraube: M3,5x8,5 Torx Schlüssel: T15 FAQ Wie wird die Innenkühlung beim Einschraubfräser genutzt? Die Innenkühlung des Einschraubfräsers leitet Kühlschmierstoff direkt zur Schneidzone; beim Modell VT103-1TM von Teknik Makina verbessert das die Spanabfuhr und reduziert Wärmebildung für stabilere Standzeiten. Welche Wendeplatten passen auf dieses Werkzeug? Das Werkzeug ist für RDMT 1003 Wendeplatten ausgelegt; kompatible Platten können ohne Modifikation eingesetzt werden, sodass der Wechsel und die Bevorratung standardisierter Schneidplatten vereinfacht werden. Welche Schrauben und Werkzeuge werden für die Montage benötigt? Für die Plattenbefestigung ist eine Torx Schraube M3,5x8,5 vorgesehen; zum Anziehen und Lösen wird der Torx Schlüssel T15 empfohlen, um sicheren Sitz und Wiederholgenauigkeit zu gewährleisten. Welche Maße sind für die Aufnahme relevant? Wesentliche Maße sind das M16 Gewinde mit 24,5 mm Einschraubtiefe sowie der 32 mm Durchmesser und die Gesamtlänge von 60 mm; diese Angaben dienen der korrekten Einpassung in Werkzeugaufnahmen. Wie bestelle ich Ersatzteile oder zusätzliche Einheiten? Für Ersatzteile und Bestellungen mit Bezug auf den Einschraubfräser VT103-1TM bitte Metav Werkzeuge kontaktieren unter eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930; technische Beratung ist verfügbar. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Taking advantage of a 32 mm shank and internal coolant, this indexable cutter delivers reliable chip evacuation and long tool life for insert-based milling operations; its compatibility with ADKT 10T3 inserts and Korloy tooling ensures straightforward integration into existing holder systems — order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Indexable milling cutter S081TM — 32 mm shank, internal coolant (Teknik Makina) The indexable milling cutter S081TM is a shank-mounted cutter body designed for high-performance face and shoulder milling with ADKT 10T3 indexable inserts. 32 mm shank diameter for stable clamping Internal coolant for improved chip control Compatible with ADKT 10T3 inserts (Korloy) Four cutting edges for steady material removal Coolant-fed machining for consistent results The built-in internal coolant channel is engineered to direct cutting fluid straight to the cutting zone, improving heat dissipation and chip evacuation. This design reduces thermal stress on the insert seats and can extend the service interval of the cutting edges. For workshops transitioning from solid tooling to indexable systems, the internal coolant feature provides an immediate productivity advantage by lowering the risk of edge build-up and enabling more consistent cutting conditions under moderate to heavy feeds. Rigidity and repeatability through robust dimensions With a 32 mm shank diameter and 125 mm overall length, the tool body delivers a balance between reach and stiffness that supports repeatable machining quality. The 45 mm cutting length and the configuration of four cutting edges are optimised to maintain cutting stability during shoulder and face operations. Stiff clamping coupled with the cutter’s geometric design reduces vibration, which helps to preserve surface finish and dimensional accuracy across production runs. Simple insert handling and proven compatibility The cutter accepts ADKT 10T3 indexable inserts and is compatible with inserts from Korloy, which simplifies procurement and tool management. Fastening is achieved with M2.5x5.5 screws that require a T8 Torx key for secure seating; this conventional fixing method keeps insert changes straightforward and predictable. The use of standard insert formats minimises inventory complexity and shortens downtime associated with tool changes in multi-shift production environments. Integration into production workflows and maintenance benefits Designed for repeatable performance, the tool body supports predictable cycle times and easier process planning. The cutter’s geometry and coolant routing work together to reduce insert wear, which can lower total tooling costs over time while maintaining throughput. For operations seeking to consolidate tooling suppliers and simplify logistics, Metav’s distribution from Emmerich supplies a reliable channel for replacement components, technical information and spare parts procurement. For application-specific recommendations or to source the Teknik Makina indexable milling cutter S081TM with internal coolant, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering options Technical data Article number: S081TM Product type: Indexable milling cutter Manufacturer: Teknik Makina Compatibility: for ADKT 10T3 indexable inserts Inner coolant: yes SKU: S081TM Core dimensions Diameter: 32 mm Shank diameter: 32 mm Overall length: 125 mm Cutting length: 45 mm Number of cutting edges: 4 Weight: 0.7 kg ECLASS: 21180806 Design & compatibility Compatible insert manufacturer: Korloy Insert type: ADKT 10T3 Torx key size required: T8 Torx screw: M2.5x5.5 Label: 32mm Schaftfräser ADKT 10T3 L125mm mit Innenkühlung UID: S081TM FAQ Which insert geometry is required for this cutter? The cutter accepts ADKT 10T3 indexable inserts; ADKT 10T3 geometry is specified for the S081TM body and Korloy-manufactured inserts are listed as compatible. Does the tool provide internal coolant delivery? Yes, the S081TM features internal coolant routing to the cutting zone to improve heat control and chip evacuation during machining. What are the shank and overall lengths? The tool has a 32 mm shank diameter and a total length of 125 mm; the cutting portion measures 45 mm. How many cutting edges are fitted and what is the fastening method? The cutter uses four cutting edges and inserts are secured with M2.5x5.5 screws that require a T8 Torx key. Who manufactures the cutter and who supplies it in Europe? Teknik Makina is the manufacturer of the tool body, while Metav Werkzeuge supplies and supports distribution from Emmerich for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a stable 32 mm shank, integrated internal coolant and compatibility with ADKT 1204 indexable inserts to increase throughput and process reliability. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice and fast delivery from Emmerich. Shank milling cutter for ADKT 1204 indexable inserts — 32 mm, internal coolant, L125 mm by Teknik Makina The Shank milling cutter for ADKT 1204 indexable inserts is designed for industrial milling applications where stability, chip control and quick insert changes matter 32 mm shank diameter for stable machining Internal coolant supply for improved chip evacuation Compatible with ADKT 1204 indexable inserts Four cutting edges for high material removal rates Increased productivity through a rigid shank and precise geometry The robust 32 mm shank and overall design prioritise stability under load, reducing vibration and improving surface finish during heavy passes. The combination of a compact length and guided insert clamping supports consistent run-out and predictable tool life, which translates into fewer tool changes and higher net operating time. This results in measurable efficiency gains on repetitive production runs without compromising process reliability. Better cooling and chip evacuation for process security Integrated internal coolant channels direct cutting fluid straight to the cutting zone, improving heat dissipation and chip evacuation. That targeted coolant supply helps maintain cutting edge integrity and reduces burr formation on the workpiece. For operations where coolant-assisted machining is standard practice, this internal supply supports longer insert life and more predictable cycle times, aiding planning and reducing unexpected downtime. Secure insert fixation and proven indexable system Designed for ADKT 1204 indexable inserts and compatible with Korloy inserts, the tool uses an M3x7 Torx screw with a T8 key for secure, repeatable clamping. The four cutting edges allow balanced stock removal and lower per-edge wear, which is particularly advantageous for serial milling tasks. The familiar indexable insert format simplifies inventory management and keeps changeover times short in a busy workshop. Practical dimensions for easy integration into existing toolholders With an overall length of 125 mm and a cutting shank length of 45 mm, the cutter fits common toolholder setups while delivering substantial cutting capacity. The modest mass supports stable spindle dynamics without excessive inertia, and the compact form factor makes the cutter suitable for both compact CNC machines and larger milling centres. Identification is simplified by the SKU S053TM for ordering and stockkeeping. Discuss technical integration of the Teknik Makina shank milling cutter and secure supply via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt dispatch from Emmerich. Technical data SKU: S053TM Product type: Shank milling cutter Manufacturer: Teknik Makina Label: 32mm Schaftfräser ADKT 1204 L125mm mit Innenkühlung Core measurements Diameter: 32 mm Overall length: 125 mm Shank diameter: 32 mm Cutting length (shank): 45 mm Weight: 0.68 kg Number of cutting edges: 4 Special features Internal coolant Compatible with ADKT 1204 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M3x7 FAQ Which indexable inserts are compatible with this cutter? The cutter accepts ADKT 1204 indexable inserts; it is compatible with Korloy inserts and designed for secure clamping with the M3x7 Torx screw. Is the tool suitable for coolant-assisted machining? Yes, the integrated internal coolant supply directs fluid to the cutting zone to aid heat control and chip evacuation during coolant-assisted machining. How many cutting edges does the tool have and what is the benefit? The tool has four cutting edges, offering balanced material removal and improved edge life, which helps maintain stable cycle times in serial production. What are the key dimensions and identification for ordering? Key dimensions: 32 mm diameter, 125 mm overall length, 45 mm cutting shank length, weight 0.68 kg. Order as SKU S053TM for efficient stock and logistics handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a 32 mm shank, internal coolant and compatibility with ADKT 1706 indexable inserts for reliable, high-performance milling; order the shaft cutter directly via Metav Werkzeuge or ask the consultants for application advice. Shaft cutter for ADKT 1706 indexable inserts — 32 mm, internal coolant (Teknik Makina) The Shaft cutter is a 32 mm-diameter milling tool designed for robust slotting and face milling with ADKT 1706 indexable inserts, offering internal coolant for improved tool life and process stability. 32 mm shank diameter Internal coolant supply Compatible with ADKT 1706 inserts (Korloy) Consistent metal removal and reduced cycle times with internal coolant The combination of internal coolant and a solid 32 mm shank provides stable chip evacuation and consistent cutting temperatures, which translates into shorter cycle times and fewer tool changes. With a 200 mm overall length and a dedicated 45 mm cutting section, this milling tool sustains deeper engagement while maintaining surface quality. The internal coolant feed reduces built-up edge and enhances the life of the indexable inserts, making the tool suited to continuous production runs where thermal control is essential. Industrial rigidity and reliable indexable-insert economy Designed for indexable-insert milling with ADKT 1706 inserts, the cutter delivers the rigidity required for demanding operations. The three cutting edges enable balanced cutting action and predictable forces, which helps to reduce vibration and extend spindle life. Using replaceable inserts keeps operating costs lower than solid-carbide alternatives, as worn cutters can be refreshed quickly without regrinding. The tool’s compatibility with Korloy inserts ensures access to widely available grades for aluminium, steel and alloyed materials. Practical handling and quick insert replacement for uptime Maintenance and insert changes are straightforward: the clamping screw supplied uses a T15 torque key and an M4x10 screw fixation for secure seat retention. The modest 1.5 kg mass and standard shank diameter make the tool easy to mount and balance, while the clearly defined cutting length simplifies process set-up. Clear tool geometry and accessible fixing mean that insert changes are fast, supporting higher machine utilisation and predictable machining cycles. Choose the Teknik Makina shaft cutter with internal coolant for stable, high-performance milling — contact Metav Werkzeuge for technical advice and fast delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S066TM Product type: Shaft cutter Brand: Teknik Makina Suitable inserts: ADKT 1706 Shank diameter: 32 mm Overall length: 200 mm Cutting length (shank/edge): 45 mm Cutting edges: 3 Weight: 1.5 kg Torx key: T15 Fixing screw: M4x10 Special features Internal coolant Compatible with Korloy inserts Indexable-insert system for economical operation Robust shank for high stability Designed for slotting and face milling FAQ What insert type does this cutter accept? The cutter accepts ADKT 1706 indexable inserts; the tool is specified for this insert geometry to ensure correct seating and cutting performance. Is there internal coolant on the shaft cutter and why is it important? Yes, the shaft cutter features internal coolant which improves chip evacuation, reduces cutting temperatures and prolongs insert life during continuous machining. Which shank diameter and overall length does the tool have? The tool has a 32 mm shank diameter and a 200 mm overall length, providing a balance between reach and rigidity for industrial milling tasks. How are inserts secured and what tool is required? Inserts are secured with an M4x10 fixing screw tightened with a T15 Torx key, enabling consistent clamping torque and quick insert changes. Can the cutter be used with Korloy inserts? Compatibility is specified for ADKT 1706 inserts and the tool is suitable for Korloy-manufactured inserts of that designation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable tool geometry and wide compatibility: the combination of a 32 mm shaft and compatibility with ANHX 1004–1206 indexable inserts ensures repeatable milling performance and straightforward maintenance. Order the S785TM directly via Metav Werkzeuge or contact the consultants for precise technical guidance. S785TM Milling Cutter (indexable) – 32 mm diameter, 4-flute by Teknik Makina The S785TM is a robust indexable milling cutter designed for ANHX 1004–1206 indexable inserts, intended for general milling tasks in workshop and light production environments. 32 mm shaft diameter for stable clamping Compatible with ANHX 1004–1206 inserts 40 mm cutting length for deeper cuts Torx T8 screw M3x7 for secure insert fixation Stable geometry for consistent, accurate milling The cutter's 32 mm shaft diameter and 4 flutes deliver a rigid connection between spindle and cutting head, which reduces vibration and improves dimensional repeatability. A 90° cutting angle provides predictable engagement with the workpiece and is well suited to face and shoulder milling operations. For users who require reproducible tolerances, the rigid shaft and balanced flute count help maintain tool life and part quality, while the modest overall mass (approx. 0.136 kg) keeps spindle load within typical workshop limits. Deep-cut capability with proven indexable insert compatibility Designed with a 40 mm cutting length, this tool enables deeper cuts while maintaining chip control and surface finish. Accepting ANHX 1004–1206 indexable inserts means the cutter can be reconditioned quickly by replacing worn inserts rather than the entire body. Indexable systems reduce tooling costs over time: once an insert reaches wear limits it can be rotated or replaced, restoring cutting performance without regrinding. Compatibility with Palbit-specified inserts ensures a wide selection of grades for steel, stainless steel or cast materials where appropriate. Secure clamping for rapid insert changes and reliable performance Insert retention is engineered for workshop efficiency: the cutter uses a Torx T8 drive and M3x7 fixing screws to clamp inserts reliably. Tight, repeatable clamping minimises micro-movement under cutting forces and supports consistent surface finish across multiple setups. The Torx interface reduces the risk of cam-out during torqueing, keeping insert seating precise and facilitating faster tool changes on the shop floor — a practical advantage where downtime costs are significant. Suited to workshop workflows and dependable supply With an overall length of 150 mm and a balanced design, the tool integrates easily into common tool holders and machining centres used in small series production and maintenance shops. The indexable configuration supports quick adaptation to different grades and geometries of inserts, helping workshops maintain throughput without complex retooling. Combined with Metav Werkzeuge’s sourcing and logistics, the cutter is positioned as a practical choice for teams aiming to streamline tooling inventories while retaining machining precision. For secure supply of Teknik Cutting Tools’ S785TM indexable milling cutter and tailored advice on insert grades and clamping, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S785TM Manufacturer: Teknik Makina Weight: 0.136 kg Facts Shaft diameter: 32 mm Cutting length: 40 mm Overall length: 150 mm Cutting angle: 90° Number of flutes: 4 Special features Compatible with ANHX 1004–1206 indexable inserts Insert supplier fit: Palbit Torx key size: T8 Torx screw: M3x7 FAQ Which inserts fit this cutter? The S785TM accepts ANHX 1004–1206 indexable inserts; the tool is designed for those insert geometries and sizes and is compatible with Palbit-specified grades. Is the cutter suitable for deep shoulder milling? Yes, the 40 mm cutting length and rigid 32 mm shaft make the cutter suitable for deeper shoulder milling where controlled chip evacuation and stability are required. How are the inserts secured and changed? Inserts are secured with an M3x7 screw operated via a Torx T8 key, enabling reliable clamping and quick replacement on the shop floor. Can this tool be used for stainless steel and aluminium? Material suitability depends on the chosen insert grade; the cutter body accepts standard ANHX inserts, so selecting appropriate Palbit grades provides options for stainless steel, aluminium and other materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable productivity and stable clamping are provided by the combination of internal coolant and compatibility with Korloy AP-- 1604 inserts. Benefit from a rigid 25 mm shank and a 32 mm cutting head for consistent material removal; order or request advice via Metav Werkzeuge for fast delivery from Emmerich. Shank milling cutter S260-1TM for AP-- 1604 indexable inserts, 32 mm, internal coolant (Teknik Makina) A Shank milling cutter S260-1TM designed for indexable‑insert milling where coolant delivery and secure fastening support continuous industrial production 32 mm cutting head diameter Internal through‑coolant Compatible with Korloy AP-- 1604 inserts 25 mm shank for rigid clamping Higher throughput through stable cutting geometry The combination of a robust 32 mm cutting head and three cutting edges yields steady chip load and predictable cutting forces, which translates into higher throughput in batch operations. The use of indexable inserts enables quick refreshment of the cutting edge without regrinding, reducing machine downtime and simplifying tool management. For production planners this means fewer interruptions and a reproducible surface finish on repeated workpieces. Coolant at the cutting zone for extended insert life Integrated internal coolant channels deliver lubricant and cooling directly to the cutting zone, helping to control temperatures and improve chip evacuation. That targeted cooling reduces thermal wear on the insert seating and can lead to longer tool life, particularly under demanding cutting conditions. The design supports conventional coolant systems and contributes to process stability during extended cycles. Secure clamping and fast, maintenance‑friendly assembly A 25 mm shank ensures solid clamping in standard collets and shrink holders, minimising run‑out and vibration. Insert retention uses a Torx drive to provide repeatable torque; the key and screw specification are T15 and M4x10, allowing quick, tool‑based insert changes and consistent clamping force. The assembly concept shortens maintenance intervals and reduces setup variability on the shop floor. Clear dimensions and workshop compatibility for procurement Key dimensions are plainly stated for straightforward integration: 120 mm overall length with a 45 mm effective cutting length and a compact weight of 0.469 kg, supporting ergonomic handling during tool changes. The cutter accepts AP-- 1604 indexable inserts from Korloy, easing procurement of replacements and ensuring compatibility across widely used insert ranges. Documentation and SKU referencing simplify stock keeping and reordering within an organised tooling system. Contact Metav Werkzeuge for tailored advice on the Teknik Makina S260-1TM, compatibility with Korloy AP-- 1604 inserts and reliable delivery from Emmerich. Technical Data Article number: S260-1TM Product type: Shank milling cutter Brand: Teknik Makina Compatible inserts: AP-- 1604 (Korloy) Facts Diameter: 32 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Cutting edges: 3 Weight: 0.469 kg Special features Internal cooling Torx key: T15 Torx screw: M4x10 SKU: S260-1TM FAQ What inserts fit this cutter? The S260-1TM accepts AP-- 1604 indexable inserts; compatibility with Korloy AP-- 1604 inserts is specified for straightforward replacement. Does the internal coolant enable through‑coolant machining? Yes. The internal coolant channels on the S260-1TM deliver coolant directly to the cutting zone, improving chip evacuation and aiding thermal control. Which dimensions are essential to confirm before ordering? Confirm the 32 mm head diameter, 25 mm shank diameter and 120 mm overall length; the SKU S260-1TM ensures the correct item is supplied. What fastening tools and screws are required for insert changes? Insert retention uses a Torx T15 drive and M4x10 screws; these standard fittings support reliable and repeatable insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, indexable milling system that combines efficient chip control and straightforward insert changes for reduced cycle times and predictable tool life; order this cutter through Metav Werkzeuge or consult our technical team for application-specific advice. 32 mm Shank Milling Cutter (for APKT 1003 indexable inserts) – Teknik Makina 32 mm Shank Milling Cutter (for APKT 1003 indexable inserts) is a shank-mounted milling tool engineered for CNC milling operations requiring indexable-insert performance and internal coolant delivery. 32 mm diameter with 4 cutting edges Internal coolant for improved chip evacuation Shank Ø 25 mm, L overall 100 mm Compatible with APKT 1003 Korloy inserts Consistent cycle times through controlled chip evacuation The tool's internal coolant channel and 4 cutting edges deliver predictable chip flow and thermal control, which reduces the risk of built-up edge and extends insert life. By supplying coolant directly to the cutting zone, the arrangement lowers temperatures at the insert edge and helps evacuate chips from pockets and slots, so machining interruptions are reduced and process stability improves. This results in more reliable cycle times and fewer unscheduled tool changes in series production. Rigidity and compact design for precision milling A shank Ø 25 mm combined with an overall length of 100 mm and a cutting length of 35 mm minimises overhang while maintaining a stiff tool set-up. The reduced projection increases bending stiffness and lowers radial run-out, which benefits dimensional accuracy and surface finish when performing slotting or light shoulder milling. The tool's mass and design support consistent concentricity during high-speed rotations, supporting reproducible results across batches. Fast, service-friendly insert system for efficient shopfloor routines Designed for use with APKT 1003 indexable inserts from Korloy, the cutter enables rapid insert replacement and secure clamping via a Torx T8 screw (type M2.5x5.5). The indexable concept separates cutting geometry from the body, allowing cost-effective reconditioning of cutting edges and quick changeovers. For workshops aiming to reduce non-productive time, this system shortens maintenance tasks and keeps machines cutting rather than standing idle. Speak to Metav Werkzeuge about Teknik Makina's shank milling range with internal coolant for tailored machining recommendations and reliable European supply from Emmerich Technical data SKU: S152-1TM Brand: Teknik Makina Product type: Shank milling cutter Dimensions & weight Diameter: 32 mm Overall length: 100 mm Shank diameter: 25 mm Cutting length: 35 mm Number of cutting edges: 4 Weight: 0.415 kg Torx key: T8 Screw: M2.5x5.5 Internal coolant: yes Materials & compatibility Compatible inserts: APKT 1003 Suitable insert manufacturer: Korloy Product category: Shank milling cutters SKU identifier: S152-1TM FAQ What insert type does the cutter accept? The cutter accepts APKT 1003 indexable inserts, specified for use with the Teknik Makina shank milling cutter (SKU S152-1TM). Is the tool supplied with internal coolant? Yes, the shank milling cutter is equipped with internal coolant routing to the cutting zone for improved chip evacuation. Which shank diameter is required for mounting? The tool features a 25 mm shank diameter and requires a compatible holder or spindle collet sized for Ø 25 mm. How many cutting edges are available per head? The milling head is configured with 4 cutting edges, supporting steady material removal and process stability. Which screw and key are used for the inserts? Inserts are secured with a Torx T8 screw, size M2.5x5.5, enabling quick and secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of a 32 mm shank, internal coolant and compatibility with APKT 1003 indexable inserts to secure stable material removal and extended tool life; order the S189-1TM directly via Metav Werkzeuge or contact the consultants for tailored technical advice. S189-1TM Shank milling cutter – 32 mm shank, internal coolant (Teknik Makina) A Shank milling cutter S189-1TM designed for coolant-fed milling with APKT 1003 indexable inserts, suitable for a wide range of general milling tasks in production environments. 32 mm shank diameter Integrated internal coolant Compatible with APKT 1003 inserts 200 mm overall length, 60 mm cutting length High-efficiency cutting for continuous production Engineered for repeatable performance, this shank milling cutter features a 32 mm shank and a 60 mm cutting length, providing a balanced combination of rigidity and material engagement. The geometry supports stable chip formation when fitted with APKT 1003 indexable inserts, which reduces chatter and improves surface finish on both roughing and finishing passes. By pairing a compact cutting zone with a robust shank, the tool minimises deflection under load, allowing higher feed rates and consistent cycle times in repetitive production processes. The result is increased throughput with predictable results across batches. Coolant-fed design that prolongs tool life The integrated internal coolant channel directs cutting fluid precisely to the insert edge, effectively reducing heat at the cutting zone and improving chip evacuation. This targeted coolant delivery reduces thermal wear and allows the inserts to retain cutting performance for longer, which in turn lowers tooling change frequency and downtime. For operations where thermal stability is critical—such as interrupted cuts or deep pocketing—the internal feed helps maintain dimensional accuracy and surface integrity throughout long runs, supporting predictable maintenance intervals. Compatibility and straightforward maintenance Designed for use with APKT 1003 indexable inserts from Korloy, the cutter accepts standard insert grades and geometries, enabling straightforward selection for different materials and cutting strategies. The tool is supplied with a Torx screw mounting system (Torx key T8, screw M2.5x5.5), simplifying insert changes and ensuring repeatable seating torque. Clear mechanical interfaces reduce setup time and lower the risk of incorrect assembly, making the shank cutter an efficient choice for workshops that need reliable insert exchange and minimal tooling complexity. Robust construction for versatile machining Manufactured by a recognised tooling partner, the design emphasises a durable body and precise concentricity to keep vibrations low during high-volume machining. With 4 cutting edges and a total length optimised at 200 mm, the cutter suits both face and light shoulder milling applications in steel and general workshop materials. The solid construction supports stable chip loads and contributes to repeatable dimensional outcomes, which is essential for component series that demand consistent tolerances and surface quality. For coolant-fed, compatible milling with guaranteed supply reliability, contact Metav Werkzeuge to discuss technical details or to arrange a procurement consultation on the Teknik Cutting Tools S189-1TM shank milling cutter; Metav’s consultants in Emmerich can advise on grades, inserts and delivery options. Technical data Article number: S189-1TM Label: 32 mm shank milling cutter for APKT 1003 L200 mm with internal coolant SKU: S189-1TM Product type: Shank milling cutter Brand: Teknik Makina Data Shank diameter: 32 mm Overall length: 200 mm Cutting length: 60 mm Weight: 1.253 kg Number of cutting edges: 4 Special features Internal coolant supply: yes Compatible inserts: APKT 1003 Inserts manufacturer compatibility: Korloy Torx key: T8 Torx screw: M2.5x5.5 eClass: 21180806 FAQ What insert type fits this shank milling cutter? The cutter accepts APKT 1003 indexable inserts; compatibility with Korloy-specified grades is standard for the S189-1TM. Is the coolant internal or external, and how does it help? Internal coolant is integrated into the tool body; the S189-1TM directs fluid to the cutting edge to reduce heat, improve chip evacuation and extend insert life. What are the key dimensions to check for machine compatibility? Check the 32 mm shank diameter and 200 mm overall length for spindle and toolholder fit; the 60 mm cutting length determines material engagement depth. How is insert retention handled on this shank cutter? The tool uses a Torx screw system (Torx key T8, screw M2.5x5.5) for repeatable insert clamping and straightforward maintenance on the S189-1TM. Which materials is this cutter typically used on? The design targets general workshop applications and steel machining where APKT 1003 inserts are suitable; select insert grade according to material and cutting strategy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from stable clamping and efficient material removal thanks to a 32 mm cutting diameter and a shank Ø25 mm, combined with a three-edge geometry and a 90° cutting angle for predictable cycle times. Order the S260TM directly via Metav Werkzeuge or ask the consultants for tailored advice. S260TM indexable shank milling cutter – Ø32 mm, shank Ø25 mm (Teknik Makina) the S260TM indexable shank milling cutter is designed for precise face and shoulder milling using APKT 1604 indexable inserts in CNC and manual milling setups 32 mm cutting diameter Shank Ø25 mm, overall length 120 mm Compatible with APKT 1604 inserts Reliable machining performance with predictable results The tool delivers consistent cutting behaviour through a 32 mm cutting diameter and a balanced three cutting edges layout. This geometry reduces vibration and evens out tool wear, which supports repeatable tolerances in serial production. The 90° cutting angle enables efficient shoulder milling and square-sided features, translating into shorter cycle times and fewer tool changes for batch runs. Fast insert changes and secure clamping to reduce downtime Indexable inserts are secured with a M4x10 Torx screw, tightened using a T15 key, which simplifies maintenance and keeps setup time to a minimum. The cutter is specified for APKT 1604 inserts and is compatible with inserts from Korloy, allowing immediate use with established insert grades. Quick replacement of inserts supports uninterrupted production and straightforward service routines in a busy workshop. Stable mounting and compact handling for varied toolholders A shank diameter of 25 mm provides secure engagement with common collet and chuck toolholders while the overall length of 120 mm keeps the assembly compact for reduced overhang. The cutter’s modest mass (approx. 0.469 kg) contributes to lower spindle load during rapid traverses and is beneficial where tool change dynamics and balance are relevant. The design supports efficient inventory management by using widely available APKT 1604 inserts for fast replenishment. For order placement, specification checks or procurement advice for the S260TM by Teknik Makina, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance Technical data Article number: S260TM Manufacturer: Teknik Makina Name: Indexable shank milling cutter for APKT 1604 Indexable Inserts Facts Diameter: 32 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.469 kg Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 eClass: 21180806 ETIM: EC011860 FAQ How are the indexable inserts fixed in place? The S260TM secures APKT 1604 inserts with an M4x10 Torx screw; use a T15 key for clamping and removal. Can Korloy inserts be used with this cutter? Yes, the cutter is specified for APKT 1604 inserts and is compatible with Korloy APKT 1604 grades. What shank size is required for mounting? The tool features a shank diameter of 25 mm, suitable for standard collet and chuck toolholders that accept this diameter. How many edges does the cutter have and what is the machining benefit? The cutter has three cutting edges; this configuration provides a good compromise between material removal rate and surface finish, with balanced wear across inserts. What are the key dimensions to note for tool planning? Important dimensions are Ø32 mm cutting diameter, 45 mm cutting length and 120 mm overall length; weight is approximately 0.469 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable, repeatable machining thanks to the Ø32 mm shank and three cutting edges, combined with compatibility for APKT 1604 indexable inserts for fast insert changes and consistent surface finish. Order the S270TM directly via Metav Werkzeuge or ask our consultants if needed. S270TM — Indexable insert milling cutter, Ø32 mm shank, Teknik Makina S270TM is an indexable insert milling cutter designed for reliable roughing and finishing in general metalworking applications using APKT 1604 inserts. Ø32 mm shank diameter Compatible with APKT 1604 inserts Three cutting edges for stable cutting Overall length 150 mm for deeper reach Higher productivity with predictable metal removal The S270TM combines a 32 mm shank with a 55 mm effective cutting length to deliver a balance of rigidity and reach that supports consistent metal removal rates. Using APKT 1604 indexable inserts reduces downtime for tool changes: worn edges are replaced quickly without reclamping the holder, improving uptime at the machine. The cutter’s three cutting edges ensure smoother chip flow and reduced vibration compared with fewer-edge alternatives, which translates into a more reliable surface quality and longer insert life per edge. For planners and shop managers this means more predictable cycle times and easier process control. Robust design for everyday workshop demands Engineered for use in production and maintenance environments, the tool features a solid shank construction with a total length of 150 mm and a mass of approximately 0.876 kg, giving a stable feel in the toolholder. The 90° cutting geometry provides versatile face and peripheral milling capability, suitable for a wide range of steels and general-purpose applications. The assembly uses an M4x10 Torx screw secured with a T15 key, simplifying insert fastening and ensuring repeatable clamping torque. This practical, serviceable design reduces setup complexity and supports consistent part quality during extended runs. Versatile insert compatibility for flexible tooling strategies The cutter accepts standard APKT 1604 indexable inserts and is listed as compatible with Korloy inserts, enabling procurement flexibility and fast access to proven grades for different materials. By separating cutter body and insert grade decisions, users can adapt cutting data to component material — from general steels to alloyed materials — without replacing the holder. The modular approach lowers tooling inventory costs while offering quick on-machine changes. For operations seeking to streamline tooling, this configuration supports a clear cost-to-performance optimisation strategy. For reliable supply and application advice on the Teknik Makina S270TM indexable insert cutter, contact Metav Werkzeuge to arrange stock checking and technical guidance tailored to specific machining tasks. Technical data Article number: S270TM Brand: Teknik Makina Description: Indexable insert milling cutter for APKT 1604 indexable inserts Facts Shaft diameter: 32 mm Cutting length (effective): 55 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.876 kg Special features For APKT 1604 indexable inserts Compatible inserts manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 SKU: S270TM FAQ Which inserts fit this milling cutter? The cutter is designed for APKT 1604 indexable inserts; Korloy grades are suitable choices for typical applications with the S270TM. What are the key dimensions of the tool? The S270TM has a 32 mm shank diameter, 55 mm effective cutting length and an overall length of 150 mm, providing a balance of rigidity and reach. How many cutting edges does it have and what is the geometry? This indexable cutter uses three cutting edges with a 90° cutting angle to enable stable peripheral and face milling operations. What fastening hardware is required for insert clamping? Insert clamping uses an M4x10 Torx screw, tightened with a T15 Torx key for secure and repeatable clamping on the S270TM. Who manufactures and supplies this tool? The tool is produced by Teknik Cutting Tools and is available through Metav Werkzeuge under SKU S270TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of internal coolant and a secure 32 mm shank to improve cycle stability and extend insert life. The tool's compatibility with APMT 11T3 indexable inserts (Korloy) and a compact 125 mm overall length make it efficient for space-conscious setups. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Indexable insert shank cutter S240-1TM — 32 mm shank, internal coolant (Teknik Makina) The Indexable insert shank cutter S240-1TM is a coolant-fed milling tool engineered for insert-mounted machining with APMT 11T3 inserts, suitable for stable roughing and semi-finishing operations. 32 mm shank for secure clamping Internal coolant for extended tool life Compatible with APMT 11T3 Korloy inserts 125 mm overall length, 40 mm cutting length Improved tool life through controlled cooling and chip evacuation The presence of internal coolant directs cutting fluid precisely to the cutting edge, reducing thermal load and enabling more consistent cutting temperatures. This results in longer insert life and fewer unscheduled tool changes, which increases uptime in production environments. By combining coolant delivery with an indexable system for APMT 11T3 inserts, the cutter supports repeatable performance under varying cutting conditions while keeping maintenance straightforward. Stable clamping and predictable machining dynamics A 32 mm shank diameter provides a stiff connection to the holder, reducing vibration and improving surface integrity when machining. The tool features 4 cutting edges, which distribute cutting forces evenly and help maintain cutting balance at elevated feeds. Secure fastening using the specified T8 Torx engagement and M2.5x6.5 screw ensures reliable insert retention, making the system suitable for continuous production where reproducible tool setup is essential. Compact design with workshop-friendly handling and compatibility With an overall length of 125 mm and a 40 mm cutting length, the cutter balances accessibility and reach for confined set-ups while maintaining rigidity. The design accepts standard APMT 11T3 inserts and is matched to Korloy inserts as specified, simplifying procurement and inventory management. The relatively modest mass supports rapid axis accelerations without compromising process stability, helping operations achieve efficient cycle times with predictable quality. For procurement or technical guidance on the Teknik Cutting Tools S240-1TM with internal coolant, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks or to place an order Technical data Article number: S240-1TM Manufacturer: Teknik Makina Label: 32mm Schaftfräser APMT 11T3 L125mm mit Innenkühlung SKU: S240-1TM Core specifications Diameter: 32 mm Overall length: 125 mm Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 0.764 kg Torx key: T8 Torx screw: M2.5 x 6.5 Internal coolant: Yes Special features Fits APMT 11T3 indexable inserts Compatible with Korloy inserts Insert-mounted milling cutter Robust shank for stable clamping FAQ Which inserts are compatible with this cutter? The shank cutter S240-1TM is designed for APMT 11T3 indexable inserts and is specified to work with Korloy inserts as indicated in the product data. Is internal coolant integrated into the tool? Yes — the S240-1TM features internal coolant, which delivers cutting fluid directly to the insert seat and cutting edge to aid cooling and chip evacuation. What clamping interface and fastening hardware are specified? The cutter uses a secure clamping arrangement with a T8 Torx engagement and an M2.5 x 6.5 screw for insert retention, ensuring consistent insert seating and torque control. What are the physical dimensions of the cutter? Key dimensions are: 32 mm diameter, 125 mm overall length and 40 mm cutting length, with a tool weight of 0.764 kg. How many cutting edges does the tool have and what is the benefit? The cutter has 4 cutting edges, which distribute load and support balanced cutting forces for improved stability and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of a 32 mm shank, compatibility with APXT 1003 indexable inserts and four cutting edges for stable, repeatable material removal; this design supports reliable face and peripheral milling. Order directly via Metav Werkzeuge or consult our specialists for machining recommendations. Shank cutter S181TM – indexable cutter for APXT 1003, 32 mm shank The Shank cutter S181TM is a shank-mounted indexable milling cutter engineered for secure insert clamping and efficient face milling in general workshop and production environments. 32 mm shank diameter Compatible with APXT 1003 inserts Four cutting edges for balanced cutting 90° cutting angle for face milling Consistent material removal with reduced vibration The S181TM is designed as an indexable insert cutter with a 32 mm shank and a moderate overall length, giving a predictable stiffness-to-reach ratio. The combination of a substantial shank diameter and four cutting edges minimises chatter and spreads cutting forces across multiple edges, which leads to more uniform tool wear and improved surface finish. The 90° cutting angle is particularly advantageous for face milling operations where axial engagement and flat surfaces are priorities, enabling stable passes with consistent material removal rates. Fast insert changes and secure clamping for high uptime Tool change efficiency is built in: inserts for this holder follow the APXT 1003 format and are secured with an M2.5x5.5 Torx screw, tightened using a T8 key. The straightforward clamping concept reduces downtime during index changes and routine maintenance. Reduced changeover time improves machine utilisation and makes the cutter a practical choice where frequent insert indexing is part of the process. The robust fixing method also contributes to repeatable axial and radial run-out, supporting precise, repeatable cuts. Practical dimensions for workshop flexibility With an overall length of 150 mm and a cutting length of 45 mm, this tool balances accessibility and rigidity for common milling tasks. The nominal diameter is 32 mm, and the tool weight is approximately 0.916 kg, values that reflect a stable toolholder suitable for both automated and manual setups. These dimensional characteristics make the shank-mounted cutter suitable for conventional face milling and light shoulder work where tool stability and predictable deflection behaviour are required. Clear compatibility and maintenance facts The holder is produced for use with APXT 1003 style indexable inserts and is listed as compatible with inserts from Korloy, simplifying procurement and replacement logistics. The design uses a standard Torx screw specification for insert fixation, enabling maintenance with commonly available tools. Spare parts and replacement inserts follow industry-standard formats, which helps to keep inventory manageable and reduces lead times for production-critical components. Select the Teknik Cutting Tools S181TM for dependable indexable milling performance and contact Metav Werkzeuge for tailored technical advice or ordering assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S181TM Manufacturer: Teknik Makina Designation: Shank cutter for APXT 1003 indexable inserts Facts Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Cutting edges: 4 Weight: 0.916 kg Cutting angle: 90° Diameter: 32 mm Special features For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key size: T8 SKU: S181TM FAQ Which insert type does this cutter accept? The cutter accepts APXT 1003 indexable inserts; the holder is configured specifically for this insert format. How are the inserts fastened and which tool is required? Inserts are secured with an M2.5x5.5 Torx screw; a T8 Torx key is used for tightening and loosening. What machining tasks is the cutter intended for? This shank-mounted cutter is intended for face milling and general indexable milling tasks where a 90° cutting angle and balanced cutting edges are beneficial. Is the cutter compatible with Korloy inserts? Yes, the tool is listed as compatible with Korloy-manufactured inserts that match the APXT 1003 geometry. What are the key dimensional data to consider for setup? Important setup dimensions include a 32 mm shank diameter, 45 mm cutting length and 150 mm overall length, which affect stiffness and reach during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact solution that combines robust insert compatibility with a stable shank design for consistent results and reduced changeover times; order directly via Metav Werkzeuge or consult their specialists for application advice. Shank milling cutter for F75° APKT 1003 indexable inserts – Teknik Makina Shank milling cutter for medium-duty face and shoulder milling with indexable inserts, suited to operations that prioritise quick insert changes and machining stability Compatible with Korloy APKT 1003 inserts 32 mm cutting diameter, 25 mm shank 75° cutting angle for versatile face milling Three cutting edges for stable material removal Consistent results through proven geometry and insert compatibility The Shank milling cutter is built around a defined cutting geometry that supports reliable chip formation and surface finish. With a 75° cutting angle and a 32 mm cutting diameter, the tool enables controlled face and shoulder milling on a range of workpieces. Compatibility with APKT 1003 indexable inserts from Korloy reduces toolholder complexity and makes insert procurement straightforward. The three-flute design ensures stable cutting forces and helps maintain dimensional accuracy during interrupted cuts. Technical specifications like the 25 mm shank and 100 mm overall length make the cutter suitable for standard arbors and extensions commonly found in workshop setups. Faster changeovers and predictable tool life for productive shops Tool changes are simplified by the supplied fastening arrangement: a M2.5x5.5 Torx screw (T8) secures each insert, allowing quick replacement and minimising downtime. The indexable-insert concept separates cutting geometry from the body, so wear on the cutter body does not directly affect cutting performance; worn edges are swapped for fresh ones, restoring cutting behaviour without complex regrinds. The combination of insert standardisation and a compact shank contributes to predictable maintenance intervals and lower lifecycle costs, while the measured mass of 0.413 kg ensures manageable handling during tool changes. Practical handling, integration and workshop benefits Workshops benefit from a compact package that integrates easily into existing toolrooms: the 25 mm shank diameter fits common collets and holders, while an overall length of 100 mm balances reach with rigidity. Three cutting edges distribute the load for smoother engagement and reduced vibration, which supports improved surface quality and longer insert life. The tool’s design aligns with corporate metrology and quality expectations by providing consistent repeatable results in production environments. For users who require tailored advice on machining parameters or holder compatibility, Metav Werkzeuge provides technical guidance from its Emmerich location to ensure efficient implementation. For professional milling operations using Teknik Makina components, contact Metav Werkzeuge for application guidance and assured supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S344TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Cutting diameter: 32 mm Shank diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Number of cutting edges: 3 Cutting angle: 75° Weight: 0.413 kg Designs / Special features Compatible inserts: APKT 1003 (Korloy) Torx screw: M2.5x5.5 (T8) Indexable-insert system Three-flute geometry FAQ What inserts fit this shank milling cutter? The cutter is designed for APKT 1003 indexable inserts; compatibility with Korloy inserts is specified for reliable seating and cutting geometry. Is the shank suitable for standard tool holders? Yes, the 25 mm shank diameter conforms with common collet and holder sizes used in general workshop and production environments. How are the inserts secured? Inserts are fastened with an M2.5x5.5 Torx screw (T8), enabling quick and secure replacement without special tooling. What machining tasks does this cutter cover best? The tool is intended for face and shoulder milling where a 75° cutting angle and three-edge geometry deliver stable chip evacuation and consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: S361TM Item: End Mill usable with LNMX 1510 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 32mm Cutting Edges: 2 Weight: 0.885kg Total length: 150mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of a robust, indexable-insert solution that combines a rigid Ø32 mm shank, internal coolant and a 70 mm cutting length for reliable chip evacuation and consistent material removal; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Insert Milling Cutter S095TM (Ø32 mm) by Teknik Makina — internal coolant, L150 mm Indexable Insert Milling Cutter S095TM for LNMX 1004 indexable inserts, engineered as a shank-mounted cutter body for efficient milling tasks in workshop and production environments. Ø32 mm shank for stable clamping Internal coolant for improved tool life 4 cutting edges for steady material removal Compatible with LNMX 1004 Korloy inserts Consistent cutting performance through rigid design The milling body features a Ø32 mm shank and a total length of 150 mm, delivering the axial stability required for repeatable grooves and face milling. With a 70 mm cutting length and 4 cutting edges, the tool generates balanced chip load distribution that reduces vibration. The resulting improvement in process stability is reflected in more consistent surface finishes and reduced rework, while the 0.75 kg mass helps maintain momentum without unnecessary strain on spindle bearings. Optimised coolant routing and insert interface Equipped with internal coolant, the cutter directs coolant precisely to the insert cutting zones, promoting effective cooling and improved chip control. The body is specified for LNMX 1004 indexable inserts and is compatible with Korloy manufactured inserts, allowing straightforward insert changes. Fixing hardware uses T15 Torx engagement and M4x10 Torx screws for secure clamping of inserts, which simplifies maintenance and shortens replacement time during tool changes. Practical benefits for the workshop and production line As an indexable-insert tool, the cutter body reduces toolholder inventory by enabling multiple inserts to be fitted on a single shank tool, cutting tooling costs and setup complexity. The modular nature of the system ensures that wear is managed at the insert level rather than the entire tool, making downtimes shorter and consumable replacement more economical. The robust construction supports steady cutting parameters, which aids throughput and repeatability in batch production. Quick maintenance and reliable compatibility Maintenance is made straightforward by standardised fastening and widely available insert types. The use of a Torx T15 key and M4x10 screws ensures repeatable clamping torque during reassembly; spare screws and keys are commonly stocked. The cutter body’s compatibility with LNMX 1004 inserts from Korloy allows selection of grades and geometries tailored to the workpiece material and cutting strategy, providing a flexible solution for varied milling tasks. For procurement or application guidance on the Teknik Makina S095TM with internal coolant, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a tailored supply and technical consultation Technical data SKU: S095TM Manufacturer: Teknik Makina Product type: Milling cutter (shank cutter) Label: 32mm shank cutter LNMX 1004 L150mm with internal coolant Core measurements Diameter: 32 mm Total length: 150 mm Shank diameter: 32 mm Cutting length: 70 mm Number of cutting edges: 4 Weight: 0.75 kg Design and special features Internal coolant: yes Compatible insert type: LNMX 1004 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ What insert type does this cutter accept? The cutter accepts LNMX 1004 indexable inserts; Korloy inserts in this format are compatible with the S095TM. Is the coolant internal or external on the tool? The tool is supplied with internal coolant, which channels fluid directly to the insert cutting edges for improved cooling and chip evacuation. How many cutting edges does the cutter have? The cutter body is configured for 4 cutting edges, providing balanced material removal and steady cutting forces. What is the shank diameter and overall length? The tool has a Ø32 mm shank and a total length of 150 mm, with a cutting length of 70 mm. Which fastening hardware is used for the inserts? Inserts are secured with M4x10 Torx screws and require a T15 Torx key for fitting and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance milling solution that combines 32 mm cutting diameter, internal coolant and compatibility with R390 17 indexable inserts for consistent cycle times and low downtime. Order this insert milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shaft milling cutter S514-1TM — 32 mm, internal coolant, for R390 17 indexable inserts (Teknik Makina) The Shaft milling cutter S514-1TM is an indexable-insert cutter body engineered for versatile face and slot milling in production and jobbing environments, offering coolant-through capability for improved tool life and stable cutting. 32 mm cutting diameter Internal coolant for improved chip removal Compatible with R390 17 Sandvik inserts 25 mm precision shank, 3 cutting edges Consistent metal removal for repetitive production Designed for reliable material removal, this indexable milling cutter delivers stable cutting with a 32 mm diameter and three cutting edges, which balance cutting force and surface finish. The configuration reduces vibration in medium-depth passes and supports repeatable part tolerances, making it suitable for batch production where process stability is essential. The cutter body construction ensures concentricity on the 25 mm shank, facilitating secure clamping in standard toolholders and minimising runout-related rejects. Improved cooling and chip control for longer tool life The integrated internal coolant channel directs cutting fluid close to the cutting zone, improving lubrication and chip evacuation. This targeted coolant flow lowers cutting temperatures and reduces built-up edge on the insert, which translates into longer intervals between index changes and fewer unscheduled tool changes. For shops pursuing throughput gains, the coolant-through design supports higher average cutting speeds without compromising insert life. Broad compatibility and straightforward maintenance Compatibility with R390 17 inserts from Sandvik simplifies tooling inventories and enables fast reconditioning of cutting edges. The cutter uses a Torx T15 key and M3.5x8.5 Torx screws for secure insert retention, allowing quick insert replacement with commonly available hand tools. Clear configuration and standard fasteners reduce maintenance time and help keep machine uptime high in mixed-production shops. Practical choice for mixed-material applications With a compact overall length and a 25 mm shank dimension, the cutter suits machines with limited tool clearance while still providing 45 mm effective cutting length for many slotting and face-milling tasks. The tool body mass and geometry assist in damping chatter, which benefits surface quality when machining a range of steels and general workshop alloys. This makes the cutter a pragmatic option where versatility and reliable surface results are required. For reliable high-performance milling with internal coolant and proven insert compatibility, contact Metav Werkzeuge to order the Teknik Makina S514-1TM or discuss the best insert and holder combination with our product specialists. Technical data Article number: S514-1TM Manufacturer: Teknik Cutting Tools Product type: Shaft milling cutter (indexable insert cutter) Compatible inserts: R390 17 Compatible insert manufacturer: Sandvik Facts Diameter: 32 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Number of cutting edges: 3 Weight: 0.459 kg Special features Internal coolant (coolant-through) Torx key: T15 Torx screw: M3.5x8.5 Suitable for indexable-insert milling applications SKU: S514-1TM FAQ What inserts fit this cutter? The cutter accepts R390 17 indexable inserts; the S514-1TM is specified for the R390 17 geometry commonly supplied by Sandvik. Does the cutter support coolant-through operation? Yes — the S514-1TM features internal coolant channels that deliver fluid directly to the cutting zone for improved chip control. Which shank diameter is required in the holder? The tool has a 25 mm precision shank; a compatible 25 mm clamping system or collet holder is required for safe operation. How many cutting edges does the tool use and what is the benefit? The body is configured with three cutting edges; this provides a balance of material removal rate and surface finish while reducing cutting forces compared with higher-tooth counts. Which fasteners are needed for insert retention? Inserts are secured with M3.5x8.5 Torx screws; a T15 Torx key is used for tightening and replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of 32 mm shank rigidity, internal coolant delivery and proven indexable-insert compatibility for reliable milling performance; order directly via Metav Werkzeuge or ask the consultants for application support. Shank milling cutter S057TM — 32 mm shank, internal coolant, for TNKT 1105 indexable inserts (Teknik Makina) Shank milling cutter S057TM engineered for indexable-insert milling with internal coolant, suitable for industrial machining setups where fast insert changes and secure clamping are required. 32 mm shank for rigid clamping Internal coolant supply for tool life Designed for TNKT 1105 inserts (Korloy compatible) Maximum rigidity and consistent chip control for production runs The design centres on a 32 mm shank, delivering high clamping stiffness that reduces vibration and improves surface consistency during interrupted or continuous milling. With three cutting edges and a defined 40 mm cutting length, the cutter balances metal removal rate with tool life: fewer index changes are required compared with smaller tools, which supports predictable cycle times and reduces machine downtime. The use of indexable inserts means lower running costs and quick restoration of edge geometry without regrinding. Targeted cooling at the cutting zone for longer service intervals An integrated internal coolant channel supplies coolant directly to the cutting zone, helping to control temperatures and evacuate chips from the insert pockets. This directed cooling reduces thermal wear on the insert seats and cutting edges, which in turn extends the interval between insert changes and maintenance. The cutter’s compatibility with TNKT 1105 indexable inserts (Korloy) allows selection of grades optimised for specific applications, while the internal coolant functionality supports consistent performance under demanding conditions. Practical handling and quick insert replacement to keep shops running The tool features a robust attachment system using a Torx T8 key and M3x7 Torx screw for each insert pocket, enabling repeatable clamping torque and straightforward insert replacement. With a 130 mm total length and a compact weight of 0.69 kg, the cutter is easy to handle during setup yet long enough for many standard machining fixtures. The combination of standardised fastening and indexable inserts ensures predictable assembly times and simple inventory management for spare parts. Contact Metav Werkzeuge for specific application advice on the Teknik Makina S057TM shank milling cutter and to arrange tailored supply options from our Emmerich centre. Technical data Article number: S057TM Manufacturer: Teknik Makina Product type: Shank milling cutter Suitable for inserts: TNKT 1105 (Korloy) Facts Shank diameter: 32 mm Total length: 130 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.69 kg Special features Internal coolant Torx key: T8 Torx screw: M3x7 FAQ Which inserts fit this cutter? The cutter accepts TNKT 1105 indexable inserts; the tool was specified for Korloy-compatible TNKT 1105 grades to provide a wide choice of carbide grades and coatings. Is the tool supplied with screws or a wrench? The tool uses an M3x7 Torx screw per pocket and a T8 Torx key is the required wrench; typical supply contents vary, so confirm with Metav Werkzeuge when ordering. How does internal coolant benefit everyday machining? Directed internal coolant reduces cutting temperatures and aids chip evacuation at the insert seat, improving edge life and lowering the frequency of insert replacements in continuous production. What are the key dimensions to check for fixture compatibility? Important dimensions are the 32 mm shank diameter, 130 mm total length and 40 mm cutting length; these determine clamping requirements and reach in most standard fixtures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, long cutting reach and proven insert compatibility to maintain consistent productivity on series milling tasks; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina S712TM Shaft Milling Cutter — 32 mm shank, for VCGT 1604 indexable inserts The S712TM shaft milling cutter is a purpose-built milling tool for industrial slotting and shoulder milling where repeatable accuracy and simple indexable-insert handling are required. 32 mm shank diameter for rigid clamping Accepts VCGT 1604 indexable inserts 60 mm solid cutting length Two cutting edges for balanced cuts M4x10 Torx screw with T15 key Consistent cutting performance for series production Designed for stable metal removal, this shaft cutter offers a 32 mm shank and 60 mm cutting length to extend reach without compromising rigidity. The robust shank diameter reduces vibration and improves surface finish when machining shoulders or light slotting operations, which translates into fewer rework cycles and higher first-pass yield. The tool’s geometry with two cutting edges delivers a balanced cut pattern that helps maintain consistent tool life and repeatability on batch runs. Quick insert changes and secure clamping The tool accepts VCGT 1604 indexable inserts, enabling rapid replacement and flexible choice of grades for different workpiece materials. Clamping is secured with an M4x10 Torx screw tightened using a T15 key, providing a compact and reliable fastening solution that reduces downtime during tool changes. For managers planning production, replacing inserts is a short, safe operation, so machine availability is maximised while maintaining cutting stability. Suitable for workshop and light industrial use With an overall length of 150 mm and a weight of 0.852 kg, the cutter is designed to integrate smoothly into standard milling set-ups without requiring special adapters. The combination of modest mass and a 32 mm diameter means good compatibility with common toolholders while preserving the stiffness needed for repeatable geometric results. The tool’s specification supports use in operations where controlled metal removal and surface integrity are priorities. Practical benefits and handling guidance Using indexable inserts reduces tooling inventory costs and simplifies tool management: different grades can be deployed depending on whether the task demands wear resistance or improved surface finish. The cutter’s straightforward fastening system and clear dimensional data make set-up predictable; training for fitters and operators is minimal, so process changeover remains efficient and documented. For enquiries about suitable insert grades or clamping parameters, technical consultation is available. For assured workshop precision and tailored application support, contact Metav Werkzeuge for guidance on integrating the Teknik Cutting Tools S712TM shaft milling cutter into production—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S712TM Manufacturer: Teknik Makina Designation: Shaft milling cutter for VCGT 1604 indexable inserts SKU: S712TM Facts Shank diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.852 kg Special features Compatible inserts: VCGT 1604 Torx screw: M4x10 Torx key size: T15 Diameter: 32 mm FAQ What insert type is specified for this cutter? The cutter is specified for VCGT 1604 indexable inserts and is configured to accept industry-standard insert sizes for flexible grade selection. How is the insert secured in the cutter? Insert clamping is achieved with an M4x10 Torx screw; the required key size is T15, ensuring reliable fastening and straightforward replacement. What are the key dimensions for machine setup? Key dimensions include a 32 mm shank diameter, 60 mm cutting length and an overall length of 150 mm, which support compatible toolholder selection and reach planning. Is the tool suitable for high-speed milling? The S712TM is optimised for stable, repeatable cuts; suitable insert grade and machine parameters should be selected to match required cutting speeds and material specifics. Can the cutter be used for shoulder milling and slotting? Yes, the geometry and two cutting edges provide balanced performance for both shoulder milling and light slotting tasks in series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of stable clamping, high material removal and reliable indexable insert compatibility for efficient, repeatable milling results. Order the tool through Metav Werkzeuge or consult their specialists for the correct holder and insert pairing. Indexable Shank Milling Cutter S648TM — 32 mm shank, 4 cutting edges (Teknik Makina) A Indexable Shank Milling Cutter S648TM designed for precision face and peripheral milling with XOMX 0602–1204 indexable inserts in industrial machining environments 32 mm shank for stable clamping 4 cutting edges for efficient material removal Compatible with SECO XOMX 0602–1204 inserts 90° cutting angle for square shoulder milling Improved throughput with controlled cutting performance The cutter body delivers repeatable removal rates by combining a 32 mm shank with four cutting edges, which reduces vibration and increases tool life compared with smaller, less rigid tools. Fitted with XOMX-format indexable plates, the system allows rapid edge changes and consistent surface finishes; the XOMX 0602–1204 insert format is widely supported, facilitating procurement and inventory management. The robust geometry and 90° cutting angle make this cutter particularly effective for shoulder milling and for operations where true perpendicular faces are required, helping to shorten cycle times and improve part accuracy. Secure clamping and straightforward servicing for less downtime Rigidity is provided by the substantial shank diameter and a simple fastener system that uses a Torx M3.5x8.5 screw and a T10 key for insert retention. This combination ensures secure seating of the indexable plates and quick, repeatable insert changes, lowering maintenance times on the shopfloor. The cutter’s overall length and cutting length proportions are optimised for common toolholder arrangements to maintain concentricity and minimise run-out. Clear mechanical design reduces the need for frequent rework and supports steady production throughput in small-batch and series production alike. Versatile application range and practical workshop benefits Engineered for use with SECO-standard inserts and built to industry expectations, this milling solution supports a range of machining tasks where robust, indexable tooling is preferred. The tool’s balance of 32 mm shaft diameter, 55 mm cutting length and a compact 150 mm overall length offers a good compromise between reach and stability. For shops seeking dependable indexable tooling that integrates with existing holders and inserts, the S648TM provides compatibility and predictability. Choosing this cutter helps simplify tooling lists and supports leaner setup procedures, contributing to measurable process reliability. Discuss tool selection and holder‑insert configuration with Metav Werkzeuge to ensure optimal use of the Teknik Makina S648TM — Metav Werkzeuge provides expert advice and reliable supply from Emmerich to the workshop Technical data Article number: S648TM Type: Indexable shank milling cutter For inserts: XOMX 0602–1204 Indexable Inserts Manufacturer: Teknik Makina Numbers / Core technical data Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.937 kg Cutting angle: 90° Diameter: 32 mm Torx screw: M3.5x8.5 Torx key: T10 Special features Compatible with SECO insert standards Designed for XOMX 1204 indexable plates Rapid indexable insert replacement Suitable for face and shoulder milling applications FAQ Which insert format is required for this cutter? The cutter is designed for XOMX 0602–1204 indexable inserts; XOMX 1204 plates are supported for this body. Is this tool compatible with SECO inserts? Yes, the design specifies compatibility with SECO‑type inserts and the cutter accepts standard XOMX plates. What clamping hardware is used for the inserts? Insert retention uses a Torx M3.5x8.5 screw tightened with a T10 key for secure and repeatable clamping. What machining tasks suit this cutter best? With a 90° cutting angle and four edges, the tool is well suited for square-shoulder milling and general face/peripheral milling where rigidity and repeatability are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, stable design that combines precise indexing, a generous 60 mm cutting length and compatibility with BDMT 1704 inserts to keep machining cycles efficient and predictable; order directly via Metav Werkzeuge or consult the technical advisors if clarification is required. Shank milling cutter S582TM – Ø32 mm, 3 cutting edges, for BDMT 1704 indexable inserts by Teknik Makina The Shank milling cutter S582TM is a purpose-built indexable-insert tool for medium-duty milling tasks, designed to accept BDMT 1704 inserts and provide stable, repeatable cutting performance in production and jobbing environments. Ø32 mm shank for stable cutting 3 cutting edges for balanced material removal 60 mm cutting length for deeper passes Compatible with BDMT 1704 inserts (Kyocera) Consistent cutting performance for predictable cycle times The S582TM is engineered around a robust 32 mm shank and 3 cutting edges, which together deliver improved rigidity and a steady cutting rhythm. The 90° cutting angle provides a controlled engagement with the workpiece, reducing deflection during shoulder and face milling. Measured attributes such as a 60 mm cutting length and 150 mm overall length balance reach with stability, allowing longer passes without sacrificing surface quality. For production planners, this translates into fewer tool changes and more uniform part-to-part accuracy, supporting tighter process control on the shop floor. Serviceability and quick insert changes to reduce downtime Maintenance and indexable-insert replacement are simplified by the standard Torx fixing: the tool uses an M4x10 Torx screw secured with a T15 key, enabling fast, secure insert clamping with conventional workshop tooling. The insert pocket accepts BDMT 1704 indexable inserts, which are widely stocked and, in this configuration, listed as compatible with Kyocera manufacture. The design minimises fiddly adjustments and keeps changeover time predictable — a practical advantage for mixed-batch production where fast tool swaps preserve machine availability. Integration into indexable-insert tool systems for flexible machining As an insert-based cutter, this shank tool works within the broader ecosystem of indexable tooling: insert geometry, grade and clamping practice define the cutting result as much as the tool body. The S582TM’s specifications — 32 mm diameter, 3 cutting edges and a weight of 0.895 kg — provide a clear basis for process planning and spindle load calculations. Using standard BDMT 1704 inserts enables quick adaptation to different materials by selecting appropriate grades and geometries without changing the toolholder. This modular approach supports lean inventory strategies and rapid response to varied production requirements. Contact Metav Werkzeuge for tailored guidance on integrating the Teknik Cutting Tools S582TM into the workshop setup and benefit from fast, reliable supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S582TM Manufacturer: Teknik Makina Designation: Shank milling cutter for BDMT 1704 indexable inserts Secondary designation (EN): for BDMT 1704 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 32 mm Cutting edges: 3 Weight: 0.895 kg Special features Compatible with BDMT 1704 indexable inserts Compatible insert manufacturer: Kyocera Cutting angle: 90° Torx screw: M4x10 Torx key size: T15 Files: 62de7e560f56dbb4de4dbf0d, 62de7ee9148ec6b71020ffc7 FAQ Which inserts fit this shank cutter? The S582TM accepts BDMT 1704 indexable inserts; the tool body and pocket geometry are matched for that insert form and compatible grades, including those offered by Kyocera. How is the insert secured and which tool is required? Inserts for the S582TM are clamped with an M4x10 Torx screw; a T15 Torx key is specified for secure and repeatable fastening. What are the key dimensions to consider for fixture planning? Fixture and tool-holder planning should reference the 32 mm shank diameter, 60 mm cutting length and 150 mm overall length to ensure sufficient clearance and rigidity. Is the cutter suitable for long stepovers and deep cuts? The combination of a 32 mm shank and three cutting edges gives the S582TM a stable platform for extended passes; actual cutting parameters depend on insert grade and machine capability. How heavy is the tool for spindle balancing? The S582TM has a mass of 0.895 kg, which can be used as a reference when checking spindle balance and load calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise facing results and secure clamping: the combination of compatibility with LNMX 0603 indexable inserts and a compact, rigid design ensures reliable production throughput. Order the face milling head directly via Metav Werkzeuge or consult the team for technical advice. Face milling head for LNMX 0603 indexable inserts — 32 mm diameter, five cutting edges (Teknik Makina) The face milling head for LNMX 0603 indexable inserts is a compact cutter head engineered for efficient facing operations and straightforward insert changes on standard toolholders Compatible with LNMX 0603 Korloy inserts 32 mm cutter diameter for precise facing Five cutting edges for increased material removal Secure clamping with M3x7 Torx screws Reliable compatibility for predictable facing results This cutter head is tailored for use with LNMX 0603 indexable inserts from Korloy, providing a consistent cutting geometry that simplifies tool selection and repeatability in production. The 32 mm diameter offers a controlled contact area that reduces deflection during facing, while the arrangement of five cutting edges delivers uniform material removal. The result is a stable process that supports tight tolerances and predictable cycle times, making the component suitable for repetitive finishing tasks in busy workshops and light production lines. Secure clamping and fast serviceability reduce downtime Assembly and service have been engineered for efficiency: the insert is retained using M3x7 Torx screws and accessed with a T8 key, enabling quick and safe insert replacement. The tool shank accepts a 16 mm connection (aufnahme 16 mm) and the overall compactness — 40 mm overall height — reduces interference in confined setups. These mechanical choices minimise machine downtime and simplify maintenance routines, ensuring that machining schedules remain uninterrupted and tool changes are completed without specialised fixtures. Stability and throughput for production workflows A well-balanced cutter head geometry increases cutting stability and reduces chatter without resorting to oversized tools. The compact design and multiple cutting edges mean fewer index changes and more continuous cutting time, which directly improves productivity in repeated facing operations. The robust construction from a reputable tooling supplier ensures that the cutter head maintains edge position and alignment even under frequent use, supporting consistent surface finish and dimensional accuracy across runs. Metav's supply reliability and workshop support Sourced through Metav's European distribution network, this face milling solution benefits from a quality filter in Emmerich that prioritises reliable supply and clear specifications. Metav combines decades of metrology and tooling expertise with a broad product range, offering straightforward procurement for workshops and trade customers. Technical documentation and accessory parts such as replacement screws and keys are available through the same channel to keep the production line moving. For production-ready facing tasks choose the Teknik Cutting Tools face milling head and contact Metav Werkzeuge for ordering or tailored technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T835TM Designation: Face milling head for LNMX 0603 indexable inserts Manufacturer: Teknik Makina Core dimensions Diameter: 32 mm Overall height: 40 mm Shank diameter (aufnahme): 16 mm Cutting edges: 5 Torx screw: M3x7 Torx key: T8 Special features Compatibility: LNMX 0603 (Korloy) indexable inserts Secure clamping with Torx screws Compact design for facing operations Suitable for standard toolholders FAQ Which inserts fit this cutter head? The cutter head is designed for LNMX 0603 indexable inserts and is confirmed compatible with Korloy LNMX 0603 grades. How is the insert secured in the head? Insert clamping uses M3x7 Torx screws; the fasteners are tightened with a T8 Torx key to ensure a firm, repeatable seat. What dimensions define the tool's footprint? Core dimensions include a 32 mm cutter diameter, 40 mm overall height and a 16 mm shank connection for mounting. Can the head be used in compact tool setups? Yes; the compact overall height and shank size support installation in confined tool arrangements while maintaining cutting stability. Who supplies this face milling head? The face milling head is supplied by Teknik Makina and distributed through Metav Werkzeuge for seamless procurement and accessory availability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com