Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of rigid clamping, clear compatibility with VBMT 1604 inserts and compact dimensions for predictable tool performance — order directly via Metav Werkzeuge or consult the team for application advice. K208TM Boring Bar — SVUB for VBMT indexable inserts, 25 mm shank The K208TM boring bar is a right‑hand turning tool designed for use with VBMT 1604 indexable inserts, offering a compact 200 mm overall length for stable, space‑efficient machining. *Right‑hand orientation for conventional turning *25 mm shank for secure clamping *Compatible with VBMT 1604 inserts *200 mm overall length for compact setups *93° cutting angle for controlled chip flow Proven rigidity for consistent cutting results The toolholder is engineered around a 25 mm shank that provides a reliable interface with standard toolposts and clamping systems. The reduced overhang afforded by the 200 mm overall length lowers bending moments and improves repeatability; this translates into more consistent part tolerances and less need for rework. The ISO designation S25R SVUBR indicates the standardised interface for easy identification in tool lists and fixtures, supporting efficient set‑ups in production environments. Geometry that supports controlled material removal A 93° cutting angle together with a 40 mm cutting height helps to direct chip flow and reduce cutting forces at the insert edge. Compatibility with VBMT 1604 indexable inserts means insert changes are rapid and predictable, reducing downtime during routine tool maintenance. Right‑hand cutting direction is specified for installations that require conventional lathe operation; the geometry is optimised for secure seating of the insert and for stable contact between cutting edge and workpiece. Built for practical workshop handling and fixture compatibility With a nominal diameter of 32 mm and a weight of 0.73 kg, the bar balances mass for stable operation without causing undue operator fatigue when mounting or adjusting tools. The item suits clamping systems sized around 16 (clamping holder reference), enabling straightforward integration with common toolholder kits. The standardised interface reduces guesswork during tool changeovers and supports a structured tooling inventory strategy, cutting set‑up time and lowering the risk of mis‑clamping. Operational benefits and application fit Designed as a workhorse for indexable‑insert turning, the bar offers quick insert replacement, stable cutting performance and clear specification data for process planners. Typical users in industrial turning cells and jobbing shops will appreciate the predictable behaviour provided by the combination of VBMT compatibility, compact length and robust shank diameter. For technical clarifications or to confirm fitment with existing holders, Metav Werkzeuge provides specification support and can advise on clamping options and matching insert grades. Contact Metav Werkzeuge for application guidance or to arrange a tailored clamping recommendation for the K208TM boring bar — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss mounting and insert pairing with the Teknik Cutting Tools range. Technical data Article number: K208TM Manufacturer: Teknik Makina ISO designation: S25R SVUBR For inserts: VBMT 1604 Cutting direction: right Data Shank diameter: 25 mm Overall length: 200 mm Cutting height: 40 mm Weight: 0.73 kg Diameter: 32 Cutting angle: 93° Special features Compatibility with VBMT indexable inserts Clamping holder reference: 16 Right‑hand tool orientation Compact design for reduced overhang FAQ What inserts fit this boring bar? The K208TM is specified for use with VBMT 1604 indexable inserts and accepts the standard clamping and seating geometry for that insert size. Is the tool right‑hand or left‑hand? This tool is a right‑hand boring bar designed for conventional turning applications. What is the shank diameter and why does it matter? The shank diameter is 25 mm; a stiffer shank reduces deflection under load and improves repeatability in machining processes. How long is the boring bar and how does that affect setup? The boring bar has a 200 mm overall length; the shorter overhang helps to lower bending moments and is preferable for tight or compact setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust left-hand turning performance with a 25 mm shaft and 200 mm overall length, delivering stable insert seating and reproducible results for series production; order the boring bar directly via Metav Werkzeuge or ask our consultants for application advice. Boring Bar SVUC for VCMT Indexable Inserts — S25R SVUCL (25 mm shaft, left-hand) The Boring Bar SVUC for VCMT Indexable Inserts is a left-hand toolholder engineered for turning applications, compatible with VCMT 1604 indexable inserts and suited to both workshop and production environments. Left-hand cutting orientation 25 mm shaft diameter Compatible with VCMT 1604 inserts 200 mm overall length Consistent rigidity for improved surface finish and tool life The S25R SVUCL toolholder is designed to provide rigidity and repeatability in left-hand turning operations. The combination of a 25 mm shaft and a secure ISO shank reduces vibration at the cutting edge, which directly improves surface finish and extends insert life. The 93° cutting angle promotes favourable chip flow and predictable tool engagement, making the bar a rational choice where process stability and productivity matter. Quick insert changes and accurate positioning for efficient setups Built for indexable inserts, the toolholder accepts VCMT 1604 plates and offers a stable clamping interface that simplifies changeovers. A defined cutting height of 40 mm and precise seat geometry ensure that inserts sit at the correct datum every time, reducing set-up time and the risk of misalignment. This translates into measurable gains in throughput and lower rework rates on repetitive turning tasks. Designed for production realities: reach, balance and handling With a 200 mm overall length and a body diameter of 32 mm, the boring bar balances reach with torsional stiffness, providing access to deeper bores without sacrificing control. The modest mass (approximately 0.771 kg) aids in handling and reduces centrifugal loading at higher spindle speeds, while the left-hand configuration is ideal for applications that require reverse cutting direction or specific toolpath strategies on CNC lathes. Supply confidence and application support for workshop and industry Selected from a manufacture line by Teknik Cutting Tools, this holder combines established manufacturing quality with the pragmatic supply chain offered by Metav. Metav’s position as a precision partner means transparent logistics and access to application guidance; this is particularly valuable for shops scaling production or standardising tooling across machines, where consistency and supplier reliability are decisive factors. For robust left-hand turning solutions order the Teknik Cutting Tools S25R SVUCL boring bar (SKU K304TM) through Metav Werkzeuge or contact our consultants at Metav Werkzeuge for tailored application advice. Technical data Article number: K304TM ISO designation: S25R SVUCL Product name: SVUC for VCMT Indexable Inserts Manufacturer: Teknik Makina Facts Shaft diameter: 25 mm Overall length: 200 mm Diameter: 32 mm Cutting height: 40 mm Weight: 0.771 kg Cutting angle: 93° Special features Compatible with VCMT 1604 inserts Left-hand cutting direction Clamping size: 16 For indexable turning applications FAQ Which insert type is recommended for this toolholder? The toolholder is specified for VCMT 1604 indexable inserts; using the correct insert grade and geometry for the workpiece material ensures optimal performance with the S25R SVUCL from Teknik Cutting Tools (SKU K304TM). Is the boring bar suitable for CNC lathe operations? Yes, the bar’s dimensions — 25 mm shaft and 200 mm overall length — and its secure mounting make it suitable for CNC lathe turning tasks where a left-hand cutting direction is required. What is the significance of the 93° cutting angle? A 93° cutting angle provides a stable engagement geometry that improves chip control and distributes cutting forces favourably, which is beneficial for repeatable finishing passes and consistent tool life. Can this holder be used for deep internal turning? With a 200 mm overall length and a 32 mm body diameter, the bar offers a balanced combination of reach and stiffness for medium-depth internal turning; deeper operations should be evaluated for rigidity and chatter risk. How is insert positioning ensured after changeover? The toolholder’s seat and clamping arrangement are engineered to reproducibly locate VCMT 1604 inserts at the correct cutting height (40 mm), reducing adjustment time and ensuring consistent cutting geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of 75° cutting geometry and standard insert compatibility to improve process stability and reduce tooling changeover time; combine this with secure clamping from the Ø25 mm shank for consistent results. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. S25S DCKNR Boring Bar (DCKNR for CN-- 1204 Indexable Inserts) – 75° cutting angle, Ø32 mm overall diameter by Teknik Makina The S25S DCKNR is a right-hand boring bar designed for turning operations with CN-- 1204 indexable inserts, ideal for medium-duty internal and external turning on CNC lathes and manual lathes 75° cutting angle for stable cutting Compatible with CN-- 1204 indexable inserts Shank Ø25 mm for secure clamping Robust construction, 0.955 kg weight Precision and stability for demanding turning tasks The boring bar delivers consistent chip control thanks to its 75° cutting angle and right-hand geometry, which together reduce radial loads and vibration in many turning applications. A Ø25 mm shank ensures a reliable clamping interface for standard toolholders, while the Ø32 mm overall diameter contributes to torsional stiffness. These measurable design choices translate into improved surface finish and longer insert life, helping maintain process stability during series production or batch runs. Faster set-up through standardised inserts and straightforward tool interface Acceptance of CN-- 1204 indexable inserts simplifies logistics and reduces set-up time: stock common insert grades and change tools quickly without complex adjustments. The tool follows the ISO-style designation S25S DCKNR, enabling easy identification in tooling lists and CAD programmes. With an overall length of 250 mm, the bar is suited to general turning distances while keeping the cutting edge at the correct seat height, delivering repeatable positioning and faster machine changeovers with minimal downtime. Robust handling that supports a reliable workflow Constructed for everyday workshop use, the bar's 55 mm cutting edge height and 0.955 kg mass provide a balance between rigidity and manoeuvrability. The tool's geometry and weight reduce chatter on interrupted cuts and maintain cutting stability on thin-walled components. Where tool life and predictable results are required, this turning solution helps lower rework rates and improves throughput, making it suitable for toolrooms and production cells that demand dependable performance. For application advice or to secure supply of the Teknik Makina S25S DCKNR boring bar, contact Metav Werkzeuge in Emmerich – technical consultation and orders: info@metav-werkzeuge.com, phone +49 2822 7131930 Technical data Article number: K401TM Manufacturer: Teknik Cutting Tools ISO designation: S25S DCKNR Compatible inserts: CN-- 1204 Brand: Teknik Makina Numbers / Facts Shank diameter: 25 mm Overall length: 250 mm Cutting edge height: 55 mm Weight: 0.955 kg Cutting angle: 75° Diameter: 32 mm SKU / eClass: K401TM / 21180806 Special features / Versions Right-hand cutting direction Indexable-insert compatible design Toolholder style: DCKNR FAQ Which insert type fits this boring bar? The bar accepts CN-- 1204 indexable inserts; the holder follows the DCKNR pocket geometry for standard insert clamping and positioning. Is the shank compatible with common toolposts and holders? The Ø25 mm shank matches standard toolholder clamps and is suitable for most lathe toolposts and CNC turret pockets sized for this shank diameter. What cutting direction does the tool support? The tool is specified for right-hand cutting direction, designed for conventional right-hand turning operations. What machining tasks is this bar intended for? Designed for medium-duty internal and external turning, the bar is suitable for finishing and semi-finishing where stable cutting geometry and standard inserts are required. How does the 75° cutting angle benefit machining? A 75° cutting angle reduces radial load and improves chip flow, increasing insert life and producing a more consistent surface finish in many turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the precise 107.5° cutting geometry and stable 25 mm shank for reliable boring performance; combined with compatibility for DN-- 1506 indexable inserts this tool supports consistent component tolerances and efficient insert changes. Order the part directly via Metav Werkzeuge or consult the technical team for application advice. Boring bar K476TM — S25S DDQNR with 107.5° cutting angle and DN-- 1506 compatibility Boring bar K476TM is a right-hand cutting tool designed for internal turning and boring with indexable inserts in industrial turning applications 107.5° cutting angle for deep machining Compatible with DN-- 1506 indexable inserts Shank diameter 25 mm for stable clamping 250 mm overall length for extended reach Consistent metal removal with a defined cutting geometry The 107.5° cutting angle delivers a predictable chip flow and reduced vibration during internal turning, which translates into improved surface finish and repeatable diameters. This geometry is particularly effective where axial clearance is limited: the defined rake and contact geometry of the toolholder reduce chatter and support stable cutting forces. Using a tool with a controlled cutting angle shortens set-up times and lowers scrap rates, creating measurable gains in process efficiency. Simple compatibility and rapid insert replacement Built to the S25S DDQNR ISO designation, this boring bar accepts DN-- 1506 indexable inserts (DDQN style), allowing fast insert changes without altering tool alignment. The concept of indexable inserts means that worn cutting edges are rotated or replaced rather than regrinding the whole tool, which reduces tooling costs and machine downtime. With a right-hand cut configuration and a shaft diameter of 25 mm, the bar fits standard clamping systems and maintains rigidity during heavy cuts, supporting both coarse material removal and finishing passes. Reach, balance and suitability for production workshops With a 250 mm overall length and a nominal outer diameter of 32 mm, the bar provides the reach required for deep bores while keeping weight low at 0.935 kg, which helps reduce spindle load and improves tool life. The 50 mm cutting height supports larger insert formats for higher productivity where applicable. Designed for series production and workshop use, the component supports CNC turning centres and conventional lathes that demand reliable, repeatable results. Metav Werkzeuge’s supply chain ensures consistent availability and a quality filter for European customers, reducing procurement uncertainty for plant managers and buyers. Contact Metav Werkzeuge in Emmerich for detailed setup recommendations, compatibility checks for DN-- 1506 inserts and assistance selecting the correct clamping solution for Teknik Cutting Tools' boring bar K476TM — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: K476TM Manufacturer: Teknik Makina Model designation: S25S DDQNR Designation (EN): DDQN for DN-- Indexable Inserts Core technical data Shaft diameter: 25 mm Overall length: 250 mm Diameter: 32 mm Cutting angle: 107.5° Cutting height: 50 mm Weight: 0.935 kg Cutting direction: Right Special features Compatible with DN-- 1506 indexable inserts For DDQN indexable insert type ISO designation S25S DDQNR Clamping holder designation: 15 FAQ Which insert type fits this boring bar? The boring bar K476TM is designed for DN-- 1506 indexable inserts, corresponding to DDQN-style inserts for internal turning. Is the cutting direction right-hand or left-hand? This tool features a right-hand cutting direction; the geometry and ISO designation reflect a standard right-hand boring configuration. What are the key dimensions for setting up the tool? Key values for setup are shaft diameter 25 mm, overall length 250 mm, outer diameter 32 mm, cutting height 50 mm and cutting angle 107.5° as listed for K476TM. Which machines is this bar suited to? The bar is suitable for CNC lathes and conventional turning centres requiring a rigid, indexable-insert boring solution; its form and clamping diameter make it compatible with standard toolholders. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid, ISO-designated boring bar that combines stable clamping and straightforward insert compatibility to maintain consistent bore quality; request application advice or place the order through Metav Werkzeuge for reliable supply and fast guidance. K488TM Boring Bar (S25S DDUNL) – 25 mm shank, left-hand, for DN-- 1104 inserts | Teknik Makina The K488TM boring bar is a left-hand internal toolholder designed for indexable-insert machining, offering a compact 250 mm overall length for versatile workshop and production use 25 mm shank diameter for stable clamping Compatible with DN-- 1104 indexable inserts Left-hand cutting direction for reverse operations 250 mm overall length for standard setups High rigidity for repeatable bore quality The S25S DDUNL configuration provides a 25 mm shank and a solid construction that improves stability during internal turning operations. With a 50 mm cutting height and a nominal cutting angle of 93°, the toolholder is engineered to reduce chatter and deliver consistent bore concentricity. The result is a measurable improvement in cycle-to-cycle repeatability, which supports throughput targets and reduces rework in batch production. Geometry and insert compatibility that simplify setup Designed for the DN-- 1104 indexable insert family, the holder uses the DDUN pocket geometry to ensure secure siting and repeatable seat position. The left-hand cutting orientation and the ISO designation S25S DDUNL make the assembly straightforward for lathe setups requiring reverse feed direction. Clear mechanical references such as 32 mm outer diameter and the ISO holder code allow quick verification of compatibility with existing toolposts and turret stations. Practical handling and integration into production At 250 mm overall length and a weight of 0.956 kg, the bar balances reach and manoeuvrability for typical workshop and CNC turret applications. The compact dimensions support confined bores while maintaining sufficient cutting leverage for medium-duty internal turning. The shank diameter and standardised holder interface reduce the need for additional adaptors, shortening changeover time and helping maintain uptime on multi-shift production lines. For application-specific recommendations on using the S25S DDUNL K488TM boring bar or to check stock and delivery from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge for expert advice and local supply coordination. Technical data Article number: K488TM Manufacturer: Teknik Makina ISO designation: S25S DDUNL For inserts: DN-- 1104 Specifications Shank diameter: 25 mm Cutting height: 50 mm Weight: 0.956 kg Overall length: 250 mm Diameter: 32 mm Cutting angle: 93° Features Left-hand cutting direction Compatible with DN-- 1104 indexable inserts ISO holder format S25S DDUNL Suited for internal boring and facing operations FAQ Which insert series fits this holder? The K488TM boring bar is specified for DN-- 1104 indexable inserts and uses the DDUN pocket geometry to ensure correct seating and repeatable positioning. Is the cutting direction left-hand or right-hand? This toolholder is manufactured for left-hand cutting operations as indicated by the ISO designation S25S DDUNL. What are the main dimensions to check for turret compatibility? Key dimensions are the 25 mm shank diameter, 250 mm overall length, and a 32 mm diameter profile; these determine clamping and clearance requirements. Can the K488TM be used for deep internal bores? With a 250 mm overall length the bar is suitable for standard internal bores; for deeper applications, evaluate reach versus stability based on the machine setup and material being machined. What is the ISO designation and why is it important? The designation S25S DDUNL identifies the shank format and pocket geometry, simplifying compatibility checks with inserts and toolholders and ensuring consistent replacement parts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

With a Ø25 mm shank, 250 mm overall length and compatibility with DN-- 1506 indexable inserts, this boring bar delivers stable, repeatable internal turning in left‑hand operations; combine reach and rigidity for fewer tool changes and consistent cycle times. Order the S25S DDUNL boring bar directly via Metav Werkzeuge or ask our consultants if needed. S25S DDUNL Boring Bar — left‑hand, Ø25 mm, L 250 mm (Teknik Makina) The S25S DDUNL is a left‑hand boring bar engineered for internal turning with DN-- 1506 indexable inserts, offering extended reach and consistent chip control for CNC lathes and turning centres Left‑hand geometry for internal turning Holds DN-- 1506 indexable inserts Ø25 mm shank with 250 mm overall length 50 mm cutting height for deeper bores Precision and rigidity for internal machining This boring solution emphasises stability through a compact, stiff design that reduces vibrations and improves surface finish. The combination of a Ø25 mm shank and 250 mm overall length gives a favourable length‑to‑diameter ratio, while the 50 mm cutting height supports secure insert seating and repeatable cutting engagement. Users benefit from a predictable machining process: reduced tool wear and more consistent bore tolerances when compared with less rigid set‑ups. The included ISO designation S25S DDUNL identifies the bar for straightforward integration into tooling lists. Efficiency through compatible inserts and clear geometry Compatibility with DN-- 1506 indexable inserts simplifies tool inventory and reduces set‑up time, since standard inserts can be fitted and replaced quickly. The left‑hand cutting direction and a 93° cutting angle are optimised for specific turning strategies where reverse‑hand orientation is required, enabling reliable chip flow and safer plunging in internal operations. Lightweight at 0.95 kg, the bar balances manoeuvrability with sufficient mass to dampen chatter, helping to keep cycle times short and productivity high. Practical guidance for workshop integration Designed for use with common clamping systems, the boring bar matches holders specified as size 15, allowing rapid mounting and secure fixation. For best results, ensure the insert seat is clean and the clamping screw torqued to the toolholder manufacturer’s recommendation to maintain the 50 mm cutting height and correct cutting geometry. Suitable for routine internal facing and bore finishing, this tool fits well into mixed‑workshop environments where compatibility, repeatability and easy replacement of inserts are priorities. For precise left‑hand internal turning with proven insert compatibility, contact Metav Werkzeuge to discuss the S25S DDUNL boring bar and suitable clamping holders — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K490TM Manufacturer: Teknik Makina ISO designation: S25S DDUNL Insert type: DN-- 1506 Cutting direction: left Facts Shaft diameter: 25 mm Cutting height: 50 mm Overall length: 250 mm Weight: 0.95 kg Cutting angle: 93° Special features Compatible with DN-- 1506 indexable inserts Clamping holder reference: 15 Left‑hand boring geometry ISO designation for tool lists: S25S DDUNL FAQ Which inserts are compatible with this boring bar? The S25S DDUNL boring bar is designed for DN-- 1506 indexable inserts, allowing use of standard inserts for internal turning. Is the boring bar suitable for deep internal bores? With a 250 mm overall length and Ø25 mm shank, the bar is suitable for moderate‑depth internal operations where rigidity and controlled reach are required. What is the cutting direction and how does it affect use? This tool has a left‑hand cutting direction; ensure the lathe or CNC programme and tool assignments match this orientation for safe and effective machining. Which holder size is recommended for secure clamping? Use a clamping holder referenced as 15 to achieve proper fixation and maintain the specified 50 mm cutting height. Can the S25S DDUNL be used on CNC turning centres and manual lathes? Yes, the bar is suitable for both CNC turning centres and manual lathes provided the machine accepts the required left‑hand tooling orientation and appropriate holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a sturdy 25 mm shank and a 250 mm overall length for stable machining and predictable tool behaviour; order the tool via Metav Werkzeuge or request application advice from our consultants. S25S DDUNR boring bar — right‑hand holder for DN-- 1104 indexable inserts by Teknik Makina The S25S DDUNR boring bar is a right‑hand turning holder engineered for use with DN-- 1104 indexable inserts, providing a precise 25 mm shank and 250 mm overall length for workshop and CNC turning tasks 25 mm shank diameter 250 mm overall length Right‑hand cutting orientation For DN-- 1104 indexable inserts Stable clamping and consistent cutting performance The holder is designed around a 25 mm shank and the ISO designation S25S DDUNR, which together provide secure seating in standard tool posts and a predictable centre of gravity during rotation. This translates into reduced vibration and a steadier cutting action, so machining passes are more consistent and surface finish variation is minimised. The specification also supports repeatable setups when changing between similar operations, reducing non‑productive time at the machine. Geometry that improves chip control and tool life With a cutting angle of 93° and a cutting height of 50 mm, the tool geometry is arranged to guide chips away from the cutting zone and to present the insert at an effective engagement angle. This positioning lowers radial loads and helps to avoid unexpected insert edge damage, enabling longer insert life and fewer interruptions for tool changes. The design is particularly advantageous where stable material removal and predictable tool behaviour are essential for productivity. Practical dimensions for reliable workshop integration The boring bar’s 250 mm overall length and a nominal diameter of 32 mm provide a compromise between reach and rigidity; extended reach is available without sacrificing too much stiffness. The unit weighs 0.956 kg, which aids in stable handling and mounting while keeping the assembly manageable during tool changes. Compatibility with DN-- 1104 indexable inserts makes the holder suitable for a wide range of common turning tasks where indexable tooling is preferred for economy and fast indexability. Clear sourcing and workshop support from Metav Acquiring tooling is simplified by a reliable supply chain: the holder is stocked and can be supplied through Metav Werkzeuge, which combines extensive range and consistent availability from a European distribution point. Technical details such as ISO designation S25S DDUNR, shank and length figures are provided to support purchasing decisions and to ensure the holder matches existing tool stations and insert families. Contact Metav Werkzeuge for personalised application advice and to secure the S25S DDUNR boring bar compatible with DN-- 1104 inserts Technical Data Article number: K409TM Manufacturer: Teknik Makina ISO designation: S25S DDUNR SKU: K409TM Facts Shank diameter: 25 mm Overall length: 250 mm Cutting height: 50 mm Weight: 0.956 kg Cutting angle: 93° Diameter: 32 mm Cutting direction: Right‑hand Special features For DN-- 1104 indexable inserts DDUN ISO holder geometry Clamping designation: 11 FAQ Which inserts are compatible with this holder? The S25S DDUNR boring bar is specified for DN-- 1104 indexable inserts and is configured to locate and clamp that insert family reliably. Is the holder suitable for right‑hand turning only? Yes, the S25S DDUNR is a right‑hand holder; the cutting orientation and geometry are optimised for right‑hand turning operations. What are the key dimensions to check when mounting this tool? Important measures are the 25 mm shank diameter, 250 mm overall length and the 50 mm cutting height, which should match the tool post clearance and the intended reach requirements. How does the 93° cutting angle affect machining results? A 93° cutting angle reduces radial loading on the insert and improves chip evacuation, which supports smoother cutting and can extend insert life under comparable cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Reliable and versatile: a rigid boring bar with a Ø32 mm body, shank Ø25 mm and compatibility with DN--1504 indexable inserts ensures stable turning and simple insert changes; order the tool directly via Metav Werkzeuge or consult the advisors for application-specific guidance. K411TM Boring bar S25S DDUNR — Ø32 mm body, shank Ø25 mm, right-hand cut (Teknik Makina) A K411TM boring bar designed for indexable DN-- inserts, suited to right-hand turning tasks in CNC lathes and metal‑working shops Right-hand cutting direction Ø 32 mm body diameter Shank Ø 25 mm for secure clamping Compatible with DN--1504 inserts Greater rigidity for consistent bore quality The robust Ø32 mm body combined with a shank Ø25 mm provides increased stiffness compared with slimmer tool bars, which reduces chatter and improves surface finish. The 250 mm overall length is balanced for common lathe setups, while the 93° cutting angle helps maintain tool engagement and precise material removal. These design choices translate into fewer reworks and steadier cycle times on production runs. Fast insert changes and predictable costs Compatible with DN--1504 indexable inserts and specified as S25S DDUNR, the holder accepts standard replaceable plates for efficient changeovers. With a cutting height 50 mm and a dedicated insert pocket, the system enables quick indexing and repeatable seating without complex adjustment. The use of indexable inserts reduces consumable costs per hole and simplifies maintenance compared with solid tools. Built for shop-floor productivity and machine compatibility Optimised for CNC turning, the bar’s right-hand cut and measured mass of 0.958 kg support predictable cutting forces and steadier tool life. The 250 mm overall length and clear ISO designation make fixture planning straightforward, and the bar’s geometry reduces setup time by enabling reliable clamping. For operations requiring repeatable bore diameters and minimal set-up variance, this tooling option improves throughput without sacrificing precision. For machining operations that prioritise rigidity and simple insert handling, request availability from Metav Werkzeuge or contact the consultants at info@metav-werkzeuge.com or +49 2822 7131930 for specification support Technical data Article number: K411TM Manufacturer: Teknik Makina Facts Overall length: 250 mm Body diameter: 32 mm Shank diameter: 25 mm Cutting height: 50 mm Weight: 0.958 kg Cutting angle: 93° Cutting direction: right ISO designation: S25S DDUNR Special features Compatible inserts: DN-- 1504 For insert type: DDUN for DN-- wendeplatte Design suited to CNC turning operations Indexable-insert system for economical tool life FAQ What insert type fits this boring bar? The boring bar accepts DN--1504 indexable inserts; the holder is designated S25S DDUNR and designed for DDUN-style plates. Is the bar suitable for CNC lathes? Yes, the tool is intended for CNC turning applications; its dimensions and geometry support reliable clamping and stable cutting on common lathe setups. What is the shank and body diameter of the tool? The tool features a shank Ø25 mm and a body Ø32 mm, giving a balance of clamping security and rigidity for precise boring. Which cutting direction does the holder use? The holder is configured for right-hand cutting operations, compatible with standard right-hand lathe turning practices. How does the insert system affect running costs? Using indexable DN--1504 inserts in the S25S DDUNR holder reduces per-hole consumable cost and shortens downtime for exchange compared with solid‑carbide alternatives. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust, left-hand DWLN boring bar that combines secure clamping, precise insert compatibility and easy handling for uninterrupted production — order the DWLN boring bar directly via Metav Werkzeuge or ask our consultants if technical clarification is required. DWLN for WN-- Indexable Inserts — left-hand boring bar with 25 mm shank and 95° cutting angle DWLN for WN-- Indexable Inserts is a left-hand boring bar designed for precision internal turning with standard WN-- 0604 indexable inserts, suitable for workshop and light industrial CNC applications Left-hand cutting orientation 25 mm shank diameter for stability Compatible with WN-- 0604 inserts 95° cutting angle for controlled engagement Stable set-up for accurate internal turning The S25S DWLNL form provides a 25 mm shank and a 32 mm body diameter, delivering improved rigidity compared with slimmer holders; this stability reduces chatter in interrupted cuts and supports tight tolerances on bore walls. With an overall length of 250 mm, the tool balances reach and resilience for medium-depth internal operations. The design therefore supports predictable material removal rates and consistent surface finish, making it suitable where steady performance matters to production throughput. Secure insert mounting that speeds changeovers Engineered for WN-- 0604 indexable inserts, the holder's geometry and clamp interface enable rapid insert replacement while maintaining repeatable positioning. The 95° cutting angle together with the specified 50 mm cutting height gives a controlled cutting engagement that limits side loading on the insert seat. As a result, tool life is preserved and downtime for regripping or readjustment is minimised — a direct operational benefit for shops aiming to reduce non-cutting time without sacrificing precision. Compatibility and handling that keep jobs on schedule Left-hand cutting orientation is clearly marked and the holder weighs 0.955 kg, offering a balance between manageable handling and the mass needed to dampen vibrations. The designation S25S DWLNL denotes the shank interface and flank form, simplifying selection when matching blank holders or adapters. For processes requiring left-hand orientation with standard indexable inserts, this boring bar ensures compatibility with established insert stocks while maintaining a compact, serviceable footprint on the toolsetter. Contact Metav Werkzeuge for tailored advice on the Teknik Cutting Tools S25S DWLNL boring bar and to arrange supply from our Emmerich warehouse Technical Data Article number: K498TM Manufacturer: Teknik Makina Type: DWLN for WN-- Indexable Inserts ISO designation: S25S DWLNL Facts Shank diameter: 25 mm Body diameter: 32 mm Overall length: 250 mm Cutting height: 50 mm Cutting angle: 95° Weight: 0.955 kg Cutting direction: left-hand Special features For WN-- 0604 indexable inserts Left-hand orientation Suitable for indexable insert turning applications Clamp designation: 06 FAQ What insert type does this holder accept? The holder is designed for WN-- 0604 indexable inserts and is designated DWLN for straightforward compatibility with that insert geometry. Is the holder suitable for deep internal boring? With an overall length of 250 mm and a 25 mm shank, the tool balances reach and rigidity, making it appropriate for medium-depth internal turning where a stable setup is required. How is the cutting direction specified? This boring bar features a left-hand cutting orientation; the specification lists the cutting direction as left-hand for correct mounting and machining setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a cost-effective combination of precision, compatibility and robust rigidity for reliable turning operations; the design supports quick insert changes and consistent chip control. Order the S25S DWLNL boring bar directly via Metav Werkzeuge or ask our consultants if needed. S25S DWLNL Boring Bar (DWLN for WN-- Indexable Inserts) – 25 mm shank, 250 mm overall by Teknik Makina A S25S DWLNL boring bar designed for left-hand external turning with compatibility for WN-- 0804 indexable inserts, intended for CNC and workshop lathe applications 25 mm shank diameter Compatible with WN-- 0804 inserts Left-hand cutting direction 95° cutting angle for secure contact Increased process stability for consistent results The holder delivers high rigidity through its slim but stiff 25 mm shank and engineered body, which reduces vibration during external turning and boring tasks. This translates into fewer reworks and improved surface finish when using indexable inserts. The tool’s 250 mm overall length offers reach without compromising stability, while the 95° cutting angle ensures reliable tool-to-workpiece contact; these attributes combine to raise throughput and reduce machining downtime, making the solution attractive for production environments that prioritise predictable cycle times. Fast insert changes and adaptable machining Compatibility with WN-- 0804 inserts simplifies tooling logistics and shortens tool-change intervals. The DWLN-style geometry supports secure clamping of the insert and straightforward seating, enabling rapid replacement and reproducible set-up. The moderate mass of 0.966 kg contributes to balanced spindle dynamics, helping to maintain concentricity in longer overhangs. Operators benefit from a holder that is straightforward to prepare for a new job, while planners appreciate reduced tooling complexity and improved machine utilisation across batch or single-piece workflows. Practical fit for common turning tasks and integration Designed as a DWLN-type external toolholder, the bar suits standard lathe toolposts and ISO-compatible fixturing strategies. The cutting height 50 mm provides adequate clearance and geometry for common insert types, supporting stable chip evacuation when paired with appropriate insert grades. The left-hand cutting orientation is useful for specific set-ups where tool approach and machine configuration demand that direction. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component is intended to slot into existing tooling systems with minimal adjustment, helping to keep workshops running efficiently. Request a stock check, technical clarification or a tailored recommendation from Metav Werkzeuge for this S25S DWLNL boring bar to ensure optimal integration into the production line Technical data Article number: K500TM SKU: K500TM Brand: Teknik Makina Core data Shank diameter: 25 mm Overall length: 250 mm Cutting height: 50 mm Weight: 0.966 kg Diameter: 32 mm Cutting direction: left Cutting angle: 95° Special features ISO designation: S25S DWLNL For indexable inserts: WN-- 0804 DWLN-style external toolholder design Left-hand turning configuration Suitable for CNC lathes and workshop turning FAQ Which inserts fit this toolholder? The toolholder accepts WN-- 0804 indexable inserts; the DWLN geometry secures the insert for stable cutting performance. Is the bar suitable for CNC lathes? Yes, the S25S DWLNL boring bar is designed for CNC and conventional lathe use, offering standard DWLN compatibility for common toolposts. How does the 95° cutting angle affect machining? The 95° angle provides a secure engagement area that improves contact stability and helps maintain surface finish under varying feed conditions. What are the mounting and handling considerations? The 25 mm shank is compatible with standard clamping systems; balanced handling is aided by the bar’s 0.966 kg mass to reduce vibration in extended overhangs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of stable clamping and indexable-insert versatility to keep turning processes efficient; the S25S DWLNR boring bar delivers this through its 25 mm shaft and 250 mm overall length. Order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Boring Bar S25S DWLNR — Teknik Makina (Shaft Ø 25 mm, 250 mm length) The Boring Bar S25S DWLNR is a right-hand, indexable-insert boring bar designed for turning and internal facing operations using WN-- 0804 inserts, offering a balance of reach and rigidity for industrial workshop applications. Shaft diameter 25 mm for stable clamping Compatible with WN-- 0804 indexable inserts Overall length 250 mm for deeper bores Right-hand cutting with 95° cutting angle Greater rigidity for consistent bore quality Thanks to its shaft diameter 25 mm and a compact mass of 0.966 kg, this boring bar reduces deflection and dampens vibration during internal cutting. The result is improved surface finish and tighter roundness control compared with more slender tooling. For shops focused on repeatable accuracy, the combination of stable clamping and a calculated overall length provides a predictable tool behaviour that supports consistent cycle times and less scrap. Efficient indexable-insert system lowers operating costs Built for indexable inserts, the bar accepts WN-- 0804 inserts and features a cutting edge height 50 mm with a 95° cutting angle that favours robust chip control and tool life. The S25S DWLNR designation denotes the ISO-style shank and holder geometry, simplifying replacement and standardising inventory across a tooling cabinet. When inserts are indexed or changed, downtime is minimised and per-part tooling cost is reduced compared with solid-carbide solutions, while maintenance remains straightforward. Streamlined workshop integration and practical handling With an overall length 250 mm and a nominal body diameter of 32 mm, the bar provides reach for deeper bore access without excessive overhang. The right-hand cut orientation suits conventional spindle rotation setups. The bar’s ISO-style mounting and familiar insert form factor make it straightforward to adopt in CNC lathes or tooling towers, while the modest weight aids manual handling during setup. Metav’s supply chain in Emmerich supports reliable availability and technical guidance, making the product easy to specify into a tooling list and order through established procurement channels. For technical specification or application support on the Teknik Makina boring bar, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — to discuss integration and to place an order. Technical data SKU: K420TM Manufacturer: Teknik Makina ISO designation: S25S DWLNR Type: DWLN for WN-- Indexable Inserts Cutting direction: right Facts Shaft diameter: 25 mm Cutting edge height: 50 mm Overall length: 250 mm Body diameter: 32 mm Weight: 0.966 kg Cutting angle: 95° Compatible insert: WN-- 0804 Special features Right-hand cutting orientation Indexable-insert system for cost-effective maintenance ISO-style shank for standard clamping Designed for turning/boring operations FAQ Which inserts are required for this boring bar? The boring bar is specified for WN-- 0804 indexable inserts; these inserts are the correct form factor for the bar’s pocket geometry and clamping method. What is the ISO designation and what does it mean? The S25S DWLNR ISO designation describes the bar’s shank and holder geometry, indicating compatibility with standard clamping systems and the DWLN family of indexable-holder types. What length and diameters are given for the bar? The tool lists an overall length of 250 mm, a shaft diameter of 25 mm, and a body diameter of 32 mm, providing reach and rigidity data for setup planning. Is the cutting angle suited to heavy cutting tasks? With a 95° cutting angle, the geometry supports robust engagement and effective chip formation for a range of turning operations where insert-based cutting is appropriate. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of Ø32 mm body diameter, a 25 mm shaft for high rigidity and compatibility with WN-- 0804 indexable inserts delivers stable, repeatable internal boring results for workshop and production environments; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. K510TM Boring bar (MWLN) for WN-- indexable inserts — Ø32 mm, left-hand The K510TM Boring bar is a left-hand MWLN tool designed for internal boring with WN-- 0804 indexable inserts, suitable for lathe and milling centre set-ups. Left-hand cutting direction Ø32 mm body diameter Compatible with WN-- 0804 inserts 250 mm overall length 95° cutting angle for stability Consistent internal machining with reduced vibration The K510TM is engineered as an MWLN-style boring bar to accept standard WN-- 0804 indexable inserts, which simplifies tooling logistics and keeps changeover fast. The 95° cutting angle and the MWLN geometry concentrate cutting forces close to the support area, which reduces deflection and vibration. This geometry translates into a finer surface finish and more reliable tool life, making the bar a practical choice for precision internal bores where consistent tolerances matter. Rigidity and reach that support deeper bores With a Ø32 mm body and a 25 mm shaft, the tool offers a balance of stiffness and accessibility: the larger diameter increases bending resistance while the 250 mm overall length provides reach for medium-depth internal operations. The 45 mm cutting height allows the correct insert overhang for secure seating and stable chip formation. The unit’s mass (approx. 0.945 kg) contributes to damping cutting forces without compromising manoeuvrability during set-up. Secure clamping and straightforward maintenance The MWLN configuration pairs with a clamping holder 08 and standard insert dimensions, so insert replacement and clamping follow familiar workshop procedures; this reduces downtime and the need for specialised tooling training. The use of common indexable inserts also supports cost-efficient maintenance: stock one insert type for multiple bars and minimise inventory complexity while maintaining cutting performance. Practical for mixed production and workshop environments Designed for compatibility with conventional turning and boring fixtures, this boring bar supports flexible production workflows — from small-batch precision tasks to repeatable workshop work. The tool’s clear specifications and ISO designation (S25S MWLNL) make it easy to document in tool lists and integrate into CNC programmes. Paired with Metav Werkzeuge’s product selection, the bar contributes to a dependable, centralised supply of measurement and cutting technology for busy shops. For application guidance or to reserve the Teknik Cutting Tools K510TM MWLN boring bar, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K510TM Manufacturer: Teknik Makina ISO designation: S25S MWLNL Type: MWLN for WN-- Indexable Inserts Dimensions & core data Diameter: 32 mm Shaft diameter: 25 mm Cutting height: 45 mm Overall length: 250 mm Weight: 0.945 kg Cutting angle: 95° Cutting direction: left Fits inserts: WN-- 0804 Special features Compatible inserts: WN-- 0804 Clamping holder designation: 08 Story trigger: bohrstange SKU: K510TM Brand: Teknik Makina FAQ Which insert type fits this boring bar? The bar is specified for WN-- 0804 inserts; the MWLN geometry is matched to that insert form for secure seating and correct cutting geometry. Is the tool suitable for left-hand machining only? Yes, the K510TM is configured for left-hand cutting direction; confirm machine set-up and programme direction before operation. What are the main dimensions to consider for tooling set-up? Key dimensions are Ø32 mm body diameter, 25 mm shaft, 250 mm overall length and 45 mm cutting height; use these values when planning tool offsets and reach. How does the 95° cutting angle help in practice? A 95° cutting angle concentrates support near the cutting edge, improving stability, reducing chatter and enhancing surface finish in internal boring. Which machines are suitable for this boring bar? The bar is appropriate for conventional lathes and milling centres equipped for internal boring and indexable insert tooling where MWLN-style holders are supported. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid tool design and proven insert compatibility for reliable internal turning results; the combination of a Ø25 mm shaft, 93° cutting angle and compatibility with KNUX 1604 inserts supports consistent bore quality and long tool life. Order the component via Metav Werkzeuge for fast, dependable supply or consult the Metav team for application advice. Boring bar S25T CKUNR (RK750TM) — 93° right-hand bar for KNUX 1604 inserts by Teknik Makina A boring bar S25T CKUNR engineered for precise internal turning and heavy-duty steel machining, compatible with KNUX 1604 indexable inserts and optimised for right-hand cutting operations 93° cutting angle for secure insert seating Ø25 mm shaft for high rigidity Compatible with KNUX 1604 inserts 300 mm overall length for extended reach Greater process stability through a rigid design The bar is built around a Ø25 mm shaft that reduces deflection in deep or small-diameter bores, delivering repeatable concentricity and surface finish. The 93° cutting angle concentrates cutting forces at the insert pocket for secure seating and reduced vibration, which translates into stable machining cycles and fewer reworks. Such mechanical stability is particularly relevant in serial production and quality-sensitive applications where bore tolerance and form are critical. Fast insert change and clear compatibility for efficient setups Designed for use with KNUX 1604 indexable inserts, the tool simplifies tool inventory and changeover. The ISO designation S25T CKUNR identifies the bar’s geometry and clamping concept, helping to match holders and toolposts quickly. The right-hand cutting orientation and the specified clamping size support predictable chip flow and confident fixture planning, reducing setup time and boosting machine uptime. Built for productivity and high material removal in steel work With an overall length of 300 mm and a cutting height of 52 mm, the bar is intended to balance reach and stiffness for demanding steel operations. The mass and geometry—presented here as 1.4 kg total weight—support steady feed rates without compromising finish. For shops focused on throughput, the tool’s construction enables longer tool life and consistent cycle times, improving process economics over multiple production runs. Practical application and workshop integration The design suits internal turning tasks where robust clamping and standard insert formats shorten procurement and maintenance chains. Compatibility with widely used inserts means easier stocking and fewer special components. The bar’s metrics — including the Ø32 mm outer diameter at the cutting head and the ISO designation — aid planners when integrating the tool into existing tool magazines or tool carts, supporting a smoother transition from prototype to series production. For tailored advice or supply, request Teknik Makina’s S25T CKUNR boring bar through Metav Werkzeuge — Metav’s specialists in Emmerich can confirm fitment, lead times and delivery directly at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: RK750TM Manufacturer: Teknik Makina ISO designation: S25T CKUNR Type: CKUNR for KNUX indexable inserts Core technical data Shaft diameter: 25 mm Cutting height: 52 mm Overall length: 300 mm Diameter: 32 mm Weight: 1.4 kg Cutting angle: 93° Cutting direction: right-hand ECLASS: 21180806 Design and compatibility Compatible inserts: KNUX 1604 Clamping holder reference: 16 Right-hand cutting orientation For internal turning and steel machining FAQ What inserts are compatible with this boring bar? The boring bar is specified for KNUX 1604 indexable inserts; the ISO designation S25T CKUNR indicates the matching insert geometry. Is the bar suitable for deep bores with small diameters? Yes, the Ø25 mm shaft and the 93° cutting angle are chosen to reduce deflection and support stable machining in extended-reach internal turning. What is the overall length and mass of the tool? The tool measures 300 mm overall and weighs 1.4 kg, providing a balance between reach and rigidity for workshop applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Schaftfräser – für BLMP 0904 Wendeplatten Der Schaftfräser ist ein modularer Fräskörper zur Aufnahme von BLMP 0904 Wendeplatten und wurde für effiziente Planfräs- und Schruppbearbeitungen in der Serienfertigung konzipiert 32 mm Schaftdurchmesser für stabile Spannbedingungen Innenkühlung für bessere Kühlung und Spanabfuhr 4 Schneiden für hohe Zerspanleistung Schaftlänge 150 mm, Schneidenlänge 40 mm Passend für Taegutec BLMP 0904 Wendeplatten Effizienz und Präzision für Serienfertigung Der Fräskörper überzeugt durch die Aufnahme von BLMP 0904 Indexierbaren Platten und ist ausdrücklich kompatibel mit Taegutec-Platten, was Rüstzeiten deutlich reduziert. Mit einem Schaftdurchmesser 32 mm und vier Schneiden lässt sich ein gleichmäßiger Schnittaufwand erzielen, wodurch Prozessstabilität und Oberflächenqualität steigen. Die modulare Schneidenaufnahme ermöglicht schnellen Plattenwechsel ohne aufwändige Nachjustage, was insbesondere bei wiederkehrenden Losgrößen zu spürbarer Produktivitätssteigerung führt. Robuste Schnittstelle und sichere Befestigung Die Montage der Wendeplatten erfolgt mit einer Torx Schraube M3,5x8,5, gesichert über den Torx Schlüssel T10, was eine reproduzierbare Vorspannung und einfache Wartung sicherstellt. Der Schaft mit einer Gesamtlänge von 150 mm bietet ausreichend Zugänglichkeit bei gleichzeitiger Steifigkeit, während die effektive Schneidenlänge von 40 mm praktikable Eingriffstiefen erlaubt. Diese Kombination aus stabiler Schnittstelle und praxisgerechtem Abmessungsprofil erleichtert das Einspannen und minimiert Schwingungen im Bearbeitungsprozess. Längere Standzeit durch kontrollierte Kühlung Die integrierte Innenkühlung erhöht die Werkzeugstandzeit, indem Kühlmittel gezielt an die Schnittzone geführt wird und so Wärmebelastung und Aufbauschneiden reduziert werden. Das Ergebnis ist eine geringere Werkzeugabriebrate und konstantere Bearbeitungsqualität über längere Laufzeiten. Durch die verbesserte Spanabfuhr sinkt zudem die Wahrscheinlichkeit von Nacharbeit und Maschinenstillstand, was die Wirtschaftlichkeit in der Fertigung erhöht. Empfehlung: Für präzise und produktive Fräsprozesse mit BLMP 0904 Wendeplatten empfiehlt sich dieses Werkzeug von Teknik Makina; technische Beratung und Belieferung erfolgen zuverlässig durch Metav Werkzeuge, erreichbar unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: S491TM Marke: Teknik Makina Bezeichnung: Schaftfräser für BLMP 0904 Wendeplatten Fakten Durchmesser: 32 mm Gesamtlänge: 150 mm Schaftdurchmesser: 32 mm Schaftlänge Schneide: 40 mm Schneiden: 4 Gewicht: 0.912 kg Besonderheiten Innenkühlung Passend für Wendeplatten: BLMP 0904 Passend für Hersteller: Taegutec Torx Schlüssel: T10 (Schraubenschlüsselgröße) Torx Schraube: M3,5x8,5 (Befestigungsschraube) FAQ Wie sichere ich die Wendeplatten korrekt? Die Wendeplatten werden mit der Torx Schraube M3,5x8,5 montiert und mit dem Torx Schlüssel T10 angezogen, wodurch eine reproduzierbare Vorspannung für den Schaftfräser von Teknik Makina ermöglicht wird. Ist das Werkzeug für Taegutec BLMP 0904 Platten geeignet? Ja, der Schaftfräser ist speziell für BLMP 0904 Indexierbare Platten ausgelegt und kompatibel mit Taegutec-Platten, was einfachen Plattenwechsel und standardisierte Ersatzteilbeschaffung gewährleistet. Welche Vorteile bietet die Innenkühlung in der Praxis? Die Innenkühlung reduziert die thermische Belastung an der Schneide, verbessert die Spanabfuhr und verlängert dadurch die Standzeit des Fräsers deutlich, was Ausfallzeiten und Nacharbeit minimiert. Welche Abmessungen sind für die Spannvorrichtung relevant? Wesentliche Abmessungen sind der Schaftdurchmesser 32 mm und die Schaftlänge 150 mm; diese Werte bestimmen die Einspannbarkeit und die erreichbare Steifigkeit im Spannmittelsystem. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Schaftfräser — Schaftfräser für XNKT 0805 Wendeplatten Der Schaftfräser für XNKT 0805 Wendeplatten bietet eine robuste Lösung für Präzisionsfräsen mit integrierter Innenkühlung und hoher Laufruhe 32 mm Durchmesser für stabile Bearbeitung Innenkühlung für sichere Spanabfuhr Passend für Korloy XNKT 0805 Wendeplatten 3 Schneiden für ruhigen Lauf und Standzeit Torx Schraube M4x10 mit Torx Schlüssel T15 Präzise Konstruktion für gleichbleibende Ergebnisse Der Fräser zeichnet sich durch eine kompakte Bauform und eine präzise Schaftaufnahme aus, die Vibrationen reduziert und die Oberflächenqualität verbessert. Mit einem Durchmesser von 32 mm und einer Gesamtlänge von 125 mm sorgt das Werkzeug für stabile Schnittbedingungen, selbst bei mittleren bis anspruchsvollen Bearbeitungsaufgaben. Die Auslegung auf drei Schneiden minimiert den Rundlauf und erhöht die Standzeit, was zu planbaren Produktionszyklen führt. Innenkühlung für bessere Spanabfuhr und Prozesssicherheit Die integrierte Innenkühlung führt das Kühlmittel direkt zur Schneidezone und verbessert dadurch die Spanabfuhr sowie die Wärmeabfuhr an kritischen Stellen. Durch die Kühlmittelzufuhr an der Schnittstelle sinkt die Hitzeentwicklung, was die Standzeit der Wendeplatten verlängert und Nachbearbeitungen reduziert. Anwender profitieren von konstanteren Schnittbedingungen und geringerer Belastung für Werkzeughalter und Maschine. Kompatibilität und einfache Montage Das Werkzeug ist speziell ausgelegt für XNKT 0805 Wendeplatten und wurde für die Verwendung mit Wendeplatten des Herstellers Korloy abgestimmt. Die Befestigung erfolgt über eine Torx Schraube M4x10; zum Anziehen wird ein Torx Schlüssel T15 verwendet. Diese Kombination garantiert eine sichere Fixierung der Wendeplatte und einfache Wechselvorgänge im Fertigungsablauf, was die Rüstzeiten reduziert. Einsatzfelder und wirtschaftlicher Nutzen Der Schaftfräser eignet sich für vielseitige Fräsoperationen in der Metallbearbeitung, insbesondere für Kontur‑ und Planfräsen mit Indexplatten. Durch die Kombination aus Innenkühlung, drei Schneiden und stabiler Schaftaufnahme ermöglicht das Werkzeug konstante Bearbeitungsqualität und längere Standzeiten. Das reduziert Werkzeugkosten pro Bauteil und trägt zur Effizienzsteigerung in kleinen und mittleren Serien bei. Empfehlung: Der Schaftfräser von Teknik Makina ist ideal für Maschineneinsätze, die stabile Schnittbedingungen und kompatible Korloy XNKT 0805 Wendeplatten erfordern — bei Fragen oder für Bestellhilfe bitte Kontakt aufnehmen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: S843-1TM Marke: Teknik Makina Bezeichnung: Schaftfräser für XNKT 0805 Wendeplatten Produktart: Schaftfräser Daten Durchmesser: 32 mm Gesamtlänge: 125 mm Schaftdurchmesser: 32 mm Schaftlänge Schneide: 37 mm Schneiden: 3 Gewicht: 0.817 kg Besonderheiten Innenkühlung: ja, kühlmittelgeführt Passend für Wendeplatten-Hersteller: Korloy Wendeplatten-Typ: XNKT 0805 Torx Schlüssel: T15 (zum Anziehen der Schraube) Torx Schraube: M4x10 FAQ Ist der Fräser mit Korloy Wendeplatten kompatibel? Der Schaftfräser S843-1TM ist geeignet für XNKT 0805 Wendeplatten und wurde explizit auf Kompatibilität mit Korloy Wendeplatten ausgelegt, sodass ein sicherer Sitz und optimale Spanbildung gewährleistet sind. Wie unterstützt die Innenkühlung die Bearbeitung? Die Innenkühlung des Schaftfräsers leitet Kühlmittel direkt zur Schnittzone, verbessert die Spanabfuhr und reduziert Wärmeeintrag an der Schneide, was die Standzeit der XNKT 0805 Wendeplatten erhöht. Welche Befestigung wird genutzt und welches Werkzeug wird benötigt? Die Wendeplattenfixierung erfolgt mit einer Torx Schraube M4x10; zum Anziehen und Lösen wird ein Torx Schlüssel T15 verwendet, was schnellen und sicheren Wechsel ermöglicht. Für welche Bearbeitungsaufgaben ist der Fräser besonders geeignet? Der Schaftfräser von Teknik Makina eignet sich für Kontur‑ und Planfräsen mit Indexplatten und bietet dank drei Schneiden und stabiler Schaftaufnahme eine gute Option für mittlere Serien und präzise Aufgaben. Wie viele Schneiden hat der Fräser und welchen Vorteil bringt das? Der Fräser verfügt über drei Schneiden, was den Lauf ruhig hält und gleichmäßige Schnittkräfte erzeugt; das trägt zu konstanter Oberflächenqualität und längeren Standzeiten bei. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combining a 32 mm cutting diameter with internal coolant and compatibility for 3PKT 1004 indexable inserts, this screw-in milling cutter delivers stable material removal and simplified insert replacement. Order the VT272TM directly via Metav Werkzeuge or ask our consultants if needed. VT272TM screw-in milling cutter — 32 mm, internal coolant (for 3PKT 1004 indexable inserts) by Teknik Makina The VT272TM is a screw-in milling cutter designed for indexable-insert milling, offering coolant-fed operation for improved tool life and consistent surface finish. 32 mm cutter diameter Internal coolant for thermal stability Compatible with Taegutec 3PKT 1004 inserts Four cutting edges for productive material removal High removal rates and rigid tool engagement for productive milling The combination of a 32 mm diameter and four cutting edges supports higher material removal without sacrificing stability. The screw-in design produces a secure seating and reduced vibration compared with clamped systems, which improves process reliability and repeatability. With a generous cutting-edge height and robust geometry, this tool is aimed at workshops and production environments that prioritise consistent cycle times and predictable tool life. Coolant-fed design to reduce heat and extend insert life Integral coolant channels guarantee directed coolant flow to the cutting zone, which lowers tool temperature and reduces built-up edge formation. The internal coolant arrangement helps maintain dimensional accuracy and surface quality while extending the service intervals of indexable inserts. Quick insert changes are facilitated by the standard Torx interface, enabling efficient maintenance and reduced downtime on the shop floor. Compact dimensions and simple system integration for versatile use With a 63 mm overall length, thread 16 and a thread height of 23 mm, the cutter integrates readily into common screw-in toolholders and machining setups. The assembly weighs 0.228 kg, making it manageable for automated tool changers and manual handling alike. Compatibility with 3PKT 1004 inserts from Taegutec ensures access to proven carbide grades and grades optimised for a wide range of materials, helping to keep inventory simple and costs predictable. For coolant-fed, stable milling with Teknik Makina’s VT272TM, contact Metav Werkzeuge for procurement advice and specification support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT272TM Product type: Screw-in milling cutter Brand: Teknik Makina Facts Diameter: 32 mm Overall length: 63 mm Weight: 0.228 kg Thread: 16 Thread height: 23 mm Cutting-edge height: 40 mm Number of cutting edges: 4 Special features Internal coolant Compatible with 3PKT 1004 indexable inserts Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M2.5x7 Screw-in mounting FAQ Is this cutter suitable for high-speed finishing operations? The VT272TM is designed for productive milling; coolant-fed operation and four cutting edges support higher cutting speeds, but final parameters depend on insert grade and machine capability. Which inserts fit the cutter? This screw-in milling cutter uses 3PKT 1004 indexable inserts and is specified to accept inserts from Taegutec, enabling selection of grades for roughing or finishing. How are inserts secured and replaced? Inserts are fixed with a Torx screw; the tool uses Torx T8 and screw M2.5x7, allowing fast and repeatable insert changes with standard tooling. Can the cutter be used on automated tool changers? With a compact 63 mm overall length, thread 16 and a weight of 0.228 kg, the cutter is compatible with many automatic tool-change systems, subject to the machine’s spindle and holder interface. What advantages does internal coolant provide for production runs? Directed coolant reduces temperature and improves chip evacuation at the cutting edge, which extends insert life and helps maintain consistent surface finish over long production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of a compact 32 mm tool diameter, internal coolant and the secure M16 screw-in fastening to keep cycle times short and tool changes rapid; order directly via Metav Werkzeuge or consult our specialists for integration into existing toolholders. Screw-in milling cutter VT163-1TM — 32 mm, internal coolant, for AP-- 1604 indexable inserts (Teknik Cutting Tools) Screw-in milling cutter VT163-1TM is a robust screw-in cutter tailored for medium-duty milling with AP-- 1604 indexable inserts, offering internal coolant for improved chip control and a compact overall length for tight setups 32 mm diameter for versatile milling Internal coolant for improved chip evacuation Compatible with AP-- 1604 indexable inserts M16 screw-in fastening, three cutting edges Higher throughput from stable clamping and coolant delivery The VT163-1TM head combines a 32 mm diameter with a secure M16 screw-in connection to increase repeatability at the spindle interface. With internal coolant directed through the body, coolant reaches the cutting zone directly to support consistent chip formation and reduce built-up edge, which leads to fewer interruptions and longer insert life. The arrangement of three cutting edges and a cutting height 24 mm provides a balance between material removal rate and surface finish, making the head suitable for serial production tasks where process stability matters. Easy maintenance and quick insert changes for less downtime Designed for workshop efficiency, the tool accepts AP-- 1604 indexable inserts and is compatible with inserts from Korloy, reducing inventory complexity when matching grades and geometries. The clamping screw is a M4x10 Torx fastener tightened with a Torx T15 key, enabling quick, repeatable insert changes at the machine. The compact total length 60 mm and low mass (0.18 kg) help minimise spindle load during high-speed indexing and reduce inertial forces when accelerating, which supports fast tool-change cycles and predictable machining intervals. Practical benefits for modern production floors Beyond single-operation gains, the screw-in design and proven geometry deliver long-term value through predictable performance and straightforward replacement. The head’s configuration supports a variety of milling strategies while simplifying tool management because the same body works with standard AP-- 1604 insert families. Combined with Metav’s role as a quality filter for the European market, the product aligns with workshops that prioritise reliable supply chains and clear technical documentation to keep production moving. Choose the Teknik Cutting Tools screw-in milling cutter VT163-1TM for dependable indexable-insert milling — contact Metav Werkzeuge for technical advice and prompt delivery from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VT163-1TM Product: Screw-in milling cutter Brand: Teknik Cutting Tools Specifications Diameter: 32 mm Total length: 60 mm Thread height: 24.5 mm Cutting height: 24 mm Thread: M16 Cutting edges: 3 Weight: 0.18 kg Compatibility & features Compatible with AP-- 1604 indexable inserts Compatible insert manufacturer: Korloy Internal coolant Torx screw: M4x10, Torx key: T15 Screw-in fastening FAQ Is the cutter compatible with AP-- 1604 indexable inserts? Yes. The VT163-1TM screw-in milling cutter is designed specifically for AP-- 1604 indexable inserts and accepts compatible Korloy grades. Does this head provide internal coolant? Yes. The VT163-1TM features internal coolant to support chip evacuation and reduce thermal load at the cutting edge. What is the mounting thread and how is the insert secured? The head uses an M16 screw-in thread and inserts are secured with an M4x10 Torx screw (Torx key T15). How many cutting edges does the tool have and what is the cutting height? The tool has three cutting edges and a cutting height of 24 mm, optimised for balanced material removal and surface quality. Is the VT163-1TM suitable for fast tool changes in production? Yes. Its compact 60 mm overall length, low mass and Torx clamping system enable quick insert changes and reduced downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the secure M16 screw-in connection and the Ø32 mm cutting diameter combined with five cutting edges for consistent surface results; the tool’s compatibility with APMT 0903 indexable inserts and Korloy variants keeps maintenance straightforward. Order or request a stock check via Metav Werkzeuge for fast delivery and technical advice. VT227TM — Screw-in milling cutter, M16 thread, Ø32 mm, Teknik Cutting Tools The VT227TM is a screw-in milling cutter designed for use with APMT 0903 indexable inserts, offering a compact holder for stable, repeatable milling operations in industrial settings Screw-in cutter M16 thread Ø32 mm cutting diameter Five cutting edges for smooth cuts Compatible with APMT 0903 inserts Secure clamping and consistent cutting performance The screw-in design with an M16 connection ensures a rigid interface between spindle and toolholder, which reduces vibration and supports repeatable machining results. With a Ø32 mm diameter and five cutting edges, the tool distributes cutting forces evenly; this lowers the load per edge and helps to maintain a steady chip flow. The cutter’s cutting angle 15° contributes to controlled engagement and predictable surface finish. Overall dimensions — 65.3 mm overall length and 25.3 mm cutting height — provide a compact profile that suits many toolholders while keeping the cutting geometry accessible for maintenance. Fast indexable-insert handling and reliable clamping Compatibility with APMT 0903 indexable inserts and the specified Torx fixing system streamlines insert changes and reduces downtime. The fixing screw is listed as M2.5x5.5 Torx, with a matching T7 key for secure tightening; this standardised fastening method simplifies inventory management for spare parts. Indexable inserts allow for quick renewal of cutting edges without regrinding, and the holder’s five-edge configuration extends the service intervals between insert changes. The modest tool weight (0.229 kg) lessens spindle inertia effects, supporting stable high-speed operation where appropriate. Workflow advantages for production environments Designed as a modular cutting solution, this screw-in cutter integrates into existing cutter pools that accept APMT 0903 inserts, including Korloy-manufactured grades. The combination of M16 retention, clearly specified fixing hardware and an industry-standard insert size facilitates predictable procurement and replacement cycles. For production planners, the holder’s compact footprint and standardised interface support flexible tool assemblies and simplify changeover procedures. Technical teams benefit from precise specifications that aid in tool selection and process planning. For purchases, stock enquiries or technical consultation about the VT227TM from Teknik Cutting Tools contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: VT227TM Product name: Einschraubfräser (screw-in milling cutter) Brand: Teknik Makina Core technical data Diameter: 32 mm Thread: M16 Number of cutting edges: 5 Overall length: 65.3 mm Cutting height: 25.3 mm Thread height: 40 mm Cutting angle: 15° Weight: 0.229 kg Special features For APMT 0903 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key size: T7 Indexable-insert system for quick edge changes FAQ What insert type does this cutter accept? The cutter accepts APMT 0903 indexable inserts; the holder is specified for that insert size and is compatible with Korloy variants. Which thread and diameter are specified for the holder? The holder uses an M16 screw-in thread and has a Ø32 mm cutting diameter. How many cutting edges does the tool have and what is the benefit? The tool has five cutting edges, which spreads cutting forces across multiple edges for smoother cutting and longer intervals between insert changes. What fixing hardware is required to secure the inserts? Fixing is via a Torx M2.5x5.5 screw, tightened with a T7 key to ensure secure clamp force. Is the VT227TM suitable for quick tool changes in a production environment? Yes, the screw-in holder and indexable-insert system are designed to facilitate rapid insert replacement and standardised tool handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of internal coolant, secure M16 thread mounting and compatibility with APMT 0903 indexable inserts for reliable milling performance and reduced changeover times. Order directly via Metav Werkzeuge or consult our specialists for technical advice. Screw-in milling cutter 32 mm with internal coolant by Teknik Makina A screw-in milling cutter for APMT 0903 indexable inserts, designed for secure M16 mounting and optimised coolant supply for milling operations 32 mm cutting diameter Internal coolant supply Compatible with APMT 0903 inserts Secure mounting that keeps production running The tool is engineered around a robust M16 thread with a thread engagement of 25.3 mm, ensuring a firm connection to the holder and minimising vibration during cutting. With an overall length of 65.3 mm and a compact 0.229 kg mass, the design balances rigidity and low centrifugal load for stable machining. The secure fastenings use a Torx T8 drive and an M2.5x5.5 Torx screw, supporting quick, repeatable setups. These specifications translate into fewer interruptions on the shop floor and more predictable cycle times for series production. Optimised cooling and chip control for longer tool life Built-in internal coolant channels enable directed cooling at the cutting zone, which improves heat dissipation and helps maintain cutting-edge integrity. Combined with five cutting edges, the geometry distributes wear across multiple edges, extending indexable-insert life and reducing tooling costs per component. Effective chip evacuation and reduced thermal load also support consistent surface finish quality over longer runs, making the head suitable for tasks where tool life and repeatability are priorities. Compatibility that simplifies inventory and changeover Designed for APMT 0903 indexable inserts and compatible with inserts from Korloy, the head integrates with widely used triangular insert systems, allowing fast insert changes without specialised parts. The cutter’s configuration supports common workshop processes, enabling seamless replacement in existing tool chains and standard toolholders. For operations aiming to reduce supplier complexity while maintaining versatility, this solution harmonises with common insert stocks and keeps downtime to a minimum. Contact Metav Werkzeuge for tailored application advice or to secure the Teknik Cutting Tools screw-in milling cutter VT227-1TM with internal coolant for dispatch from Emmerich Technical data Article number: VT227-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Core specifications Cutting diameter: 32 mm Overall length: 65.3 mm Thread height: 25.3 mm Cutting-edge height: 40 mm Weight: 0.229 kg Cutting edges: 5 Special features Thread: M16 Compatible inserts: APMT 0903 Compatible insert manufacturer: Korloy Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this milling head? The screw-in milling cutter accepts APMT 0903 indexable inserts; compatible inserts from Korloy are supported and recommended for straightforward replacement. How is cooling supplied to the cutting zone? Internal coolant is integrated into the tool body; the internal coolant feature requires connection through the machine spindle or coolant-fed holder to deliver directed coolant to the inserts. What is the mounting thread and engagement length? Mounting is via an M16 thread with a thread engagement of 25.3 mm, offering secure fixation and reduced vibration in demanding milling operations. How many cutting edges are available and why does that matter? The head is equipped with five cutting edges, which spreads cutting forces and wear across multiple edges, improving tool life and lowering cost per part. What are the fastening details for the insert seat? Insert fastening uses a Torx T8 driver and an M2.5x5.5 Torx screw for reliable clamping and quick insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust, compact design that combines internal coolant and a 32 mm diameter for efficient chip evacuation and stable cutting. The M16 screw‑in interface with 24.5 mm engagement and four cutting edges supports reliable cycle times and simple insert changes — order directly via Metav Werkzeuge or consult our specialists for integration advice. Screw‑in milling cutter for APXT 1003 indexable inserts – 32 mm, internal coolant (Teknik Makina) a screw‑in milling cutter designed for use with APXT 1003 indexable inserts, suited to precise finishing and roughing operations 32 mm diameter with internal coolant M16 screw-in thread, 24.5 mm engagement Compatible with APXT 1003 inserts (Korloy) Four cutting edges for productive machining Faster machining and controlled chip evacuation with internal coolant The combination of internal coolant and a 32 mm diameter body ensures consistent chip control and improved thermal management during continuous operation. Using APXT 1003 indexable inserts the head achieves efficient material removal while reducing built‑up edge formation; this results in fewer unplanned stops and longer insert life. The tool’s four cutting edges distribute cutting forces evenly, enabling steady feed rates and an even surface finish. For production environments seeking predictable throughput, this configuration supports stable machining across batch runs. Secure connection and quick insert retention to reduce setup time The screw‑in design features an M16 thread with a 24.5 mm engagement depth, delivering a rigid connection to compatible toolholders and minimizing runout. Replacement and retention are facilitated by a Torx fastening system — T8 Torx key and M2.5x5.5 screw — allowing swift insert changes with standard workshop tools. These characteristics simplify setup procedures and reduce downtime during tool changes, helping to keep cycle times tight without sacrificing repeatability. Stability and repeatability for demanding workshop tasks With an overall length of 60 mm and a compact mass of 0.195 kg, the cutter balances stiffness and accessibility for a broad range of operations. The use of indexable inserts makes component quality repeatable: the insert seat design maintains position accuracy after every change. Compatibility with Korloy inserts offers access to a wide range of grades and geometries, enabling adaptation to different materials and cutting strategies while maintaining consistent results from one batch to the next. Practical maintenance and operational benefits for production floors Routine maintenance is straightforward thanks to the standard Torx screw and the robust screw‑in interface. The compact head minimises overhang in the spindle, contributing to reduced vibration and extended bearing life in the machine tool. Spare parts and replacement inserts for this type of tooling are widely available, and the modular concept helps keep inventory lean while preserving machining capability. If additional technical details are required or integration into an existing toolset needs discussion, Metav’s technical team is available to advise via email or telephone. Contact Metav Werkzeuge for a tailored tooling recommendation and to discuss the implementation of this Teknik Makina screw‑in milling cutter in production Technical data Article number: VT143-1TM Manufacturer: Teknik Makina Label: 32mm Einschraubfräser APXT 1003 L60mm mit Innenkühlung SKU: VT143-1TM Facts Diameter: 32 mm Overall length: 60 mm Thread: M16 Thread engagement height: 24.5 mm Cutting height: 36 mm Number of cutting edges: 4 Weight: 0.195 kg Internal coolant: yes Torx key: T8 Torx screw: M2.5x5.5 Special features Compatible with APXT 1003 indexable inserts Suitable for Korloy inserts Screw‑in mounting for secure clamping Indexable insert system for fast replacement FAQ Which inserts fit this cutter? This screw‑in milling cutter accepts APXT 1003 indexable inserts; it is specified for use with Korloy inserts in the standard insert seat. Is the tool suitable for wet machining? Yes, the cutter is configured with internal coolant, allowing direct supply of cutting fluid to the insert rake face for improved cooling and chip evacuation. What size and type of thread does the cutter use? The body uses an M16 screw‑in thread with 24.5 mm engagement to ensure a rigid connection to the toolholder. How are the inserts secured? Inserts are retained with a Torx screw; the head requires a T8 Torx key and a M2.5x5.5 screw for insert clamping and replacement. Can this head be used on long overhangs? The compact 60 mm overall length and balanced mass (0.195 kg) offer improved stiffness compared with larger heads, but long overhang applications should be evaluated for machine spindle rigidity to maintain finish and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-performance tool that combines internal coolant and a secure M16 thread to maintain process stability and extend insert life; its compatibility with BLMP 0603 indexable inserts ensures fast reconditioning and predictable machining. Order the cutter directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Screw-in milling cutter for BLMP 0603 indexable inserts — 32 mm, internal coolant, Teknik Makina The Screw-in milling cutter is a compact, threaded milling head designed for light to medium face and shoulder milling with BLMP 0603 indexable inserts, offering internal coolant and a robust M16 mounting interface for workshop and industrial use 32 mm diameter for compact machining Internal coolant for improved tool life M16 thread for secure mounting Compatible with Taegutec BLMP 0603 inserts Precise cuts from a compact head for repeatable results The compact 32 mm diameter design delivers a small footprint without compromising stability. The Screw-in milling cutter is engineered to keep vibrations low through a precise M16 thread interface and a 25 mm thread engagement, which together maintain concentricity during interrupted cuts. For production environments where repeatability matters, the reduced overhang and balanced head geometry translate into consistent surface finish and longer indexable insert life, reducing process variation and rework. Controlled cooling and secure fastening for extended performance Built with internal coolant, the tool supplies cutting fluid directly to the cutting zone, lowering temperatures at the insert edge and helping to evacuate chips efficiently. This targeted coolant feed reduces thermal wear on the insert grade and extends cutting edge life, particularly when machining aluminium alloys or steel under higher cutting speeds. The solid mounting via M16 thread ensures axial retention and simplifies changeover; Torx fastenings (T8 key, M3x6.2 screw) give reliable clamp torque and straightforward maintenance of the insert seat. Compatibility and workshop advantages for efficient tool management Compatibility with BLMP 0603 indexable inserts and verified fit for Taegutec insert families allows streamlined stocking and rapid reconditioning of cutting edges. The head provides five cutting edges distributed for stable engagement and a 40 mm effective cutting-edge height for suitable material engagement. At 0.233 kg and a total length of 65 mm, the tool is lightweight and well suited to compact toolholders and modular systems, making it practical for small-batch production as well as larger machining centres. Contact Metav Werkzeuge for application advice and procurement of the Teknik Cutting Tools VT193-1TM screw-in milling cutter with internal coolant and BLMP 0603 compatibility Technical data SKU: VT193-1TM Product type: Screw-in milling cutter Brand: Teknik Makina Facts Diameter: 32 mm Overall length: 65 mm Thread height: 25 mm Thread: M16 Cutting edges: 5 Cutting-edge height: 40 mm Weight: 0.233 kg Special features Internal coolant: yes Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 FAQ What insert type does this cutter accept? The cutter accepts BLMP 0603 indexable inserts; the design is proven compatible with Taegutec insert ranges for straightforward stocking and replacement. Is the tool suitable for through-coolant machining? Yes, the tool features internal coolant, which delivers lubricant and coolant directly to the cutting edge to help reduce temperatures and improve chip evacuation. How is the cutter secured to the holder? The cutter mounts via an M16 thread with 25 mm thread engagement; Torx fastening uses a T8 key and M3x6.2 screw for stable clamping. What applications suit this cutter best? The head is intended for compact face and shoulder milling tasks where a small diameter and stable indexed inserts are required; the combination of a short overall length and internal coolant supports medium-duty production. What is the SKU and manufacturer of the tool? The tool is sold as VT193-1TM and manufactured by Teknik Makina; the screw-in design is optimised for use with BLMP 0603 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Combine the tool's 32 mm diameter, internal coolant and compatibility with BLMP 0904 indexable inserts for reliable milling performance; order via Metav Werkzeuge or consult their technical team for process integration. VT266-1TM screw-in milling cutter — for BLMP 0904 indexable inserts with internal coolant The VT266-1TM screw-in milling cutter is a compact, screw-in milling head designed for industrial roughing and finishing operations using BLMP 0904 indexable inserts. 32 mm diameter for wide material removal Internal coolant for improved chip evacuation Four cutting edges for stable cutting performance Compatible with BLMP 0904 indexable inserts Faster, more stable milling for series production The combination of a 32 mm diameter and four cutting edges provides a balance between material removal rate and cutter stability. A shorter overhang combined with the 65 mm overall length reduces bending moments, which in turn lowers vibration and improves surface finish. In practice, these characteristics enable more consistent cycle times during repeated operations and contribute to reduced scrap rates. Less chatter and a predictable cutting behaviour are beneficial when integrating the cutter into automated or indexed machining sequences. Optimised coolant flow extends tool life This milling head features internal coolant, which supplies lubricant and coolant directly to the cutting zone. Direct coolant delivery improves chip evacuation, cools the cutting edge and reduces built-up edge formation, thereby prolonging insert life and maintaining dimensional stability. The tool accepts indexable inserts, a system where the cutting edges are replaceable when worn; this keeps running costs predictable and maintenance straightforward. The designation BLMP 0904 refers to the specific insert geometry the tool is engineered to accept, ensuring correct seating and secure clamping. Quick insert changes and reliable compatibility reduce downtime Tooling serviceability is supported by standardised fastening: a Torx T10 drive and screw M3.5x8.5 secure the insert, permitting rapid changeovers with common workshop tools. The shank incorporates an M16 thread with a thread height of 25 mm for screw-in mounting, which simplifies fixture compatibility across many adaptors and holders. The head is compatible with inserts from Taegutec, aiding parts procurement and supply-chain flexibility. The compact mass and balanced construction support repeatable clamping and easy handling during maintenance. Contact Metav Werkzeuge for a technical consultation on Teknik Makina screw-in milling cutters and to verify compatibility with existing BLMP 0904 inserts before fitting Technical Data Article number: VT266-1TM Manufacturer: Teknik Makina Type: Screw-in milling cutter Designation: for BLMP 0904 indexable inserts Facts Diameter: 32 mm Overall length: 65 mm Number of cutting edges: 4 Cutting-edge height: 40 mm Weight: 0.245 kg Thread: M16 Thread height: 25 mm Torx key: T10 Torx screw: M3.5x8.5 Internal coolant: Yes Special features Compatible insert type: BLMP 0904 Compatible insert manufacturer: Taegutec SKU: VT266-1TM FAQ What insert type does this milling cutter accept? The VT266-1TM screw-in milling cutter accepts BLMP 0904 indexable inserts and is specified for that insert geometry. Is coolant supplied through the tool? Yes, the tool features internal coolant to direct lubricant to the cutting zone for improved chip control and tool life. Which fastening and drive are required for changing inserts? Insert clamping uses a Torx screw (M3.5x8.5) tightened with a Torx T10 driver for secure and quick insert changes. What are the mounting thread details for the cutter? Mounting is via an M16 thread with a thread height of 25 mm, suited to screw-in holders and adaptors. Which manufacturers’ inserts are compatible? The cutter is compatible with BLMP 0904 inserts and lists Taegutec as a compatible insert manufacturer, supporting straightforward supply options. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of stable toolholding and efficient insert changes thanks to the 32 mm diameter and M16 screw-in thread; the compact design and five cutting edges help maintain productive cycle times. Order the VT316TM directly via Metav Werkzeuge or consult our specialists for application-focused advice. Screw-in milling cutter VT316TM — 32 mm, for LOGU 0303 indexable inserts (Teknik Makina) The Screw-in milling cutter is a compact threaded cutter designed to accept LOGU 0303 indexable inserts for fast insert replacement and reliable peripheral milling in CNC and production environments 32 mm diameter for versatile milling M16 screw-in thread for secure clamping Compatible with Kyocera LOGU 0303 inserts Five cutting edges, 40 mm effective cutting height Stable clamping and high removal rates for consistent production The screw-in design delivers a secure connection to the spindle via the M16 thread, improving concentricity and reducing vibration compared with modular adapters. With a 32 mm head diameter and five cutting edges, the tool provides a balanced cut for uninterrupted material removal; this reduces the need for frequent tool changes and supports predictable cycle times. The LOGU 0303 indexable system enables rapid insert swaps, turning wear-related downtime into a short maintenance task and preserving machine throughput. Compact length and component design that support rigidity and accessibility A compact overall length of 65 mm combined with a 25 mm thread height increases rigidity at the cutting zone while keeping overhang low. The 40 mm cutting height allows effective engagement on a single pass in many applications, and the tool’s low mass (0.21 kg) minimises centrifugal load at higher speeds. Fixing is straightforward using the supplied Torx fastener (M3x7) and Torx key T8, ensuring repeatable clamping torque and safe insert retention. These mechanical details translate directly into better surface quality and longer insert life. Practical fitment and workshop benefits for production environments Designed for use with LOGU 0303 indexable inserts and compatible with Kyocera-specified inserts, the tool is aimed at operations that prioritise quick changeover and predictable tooling behaviour. The screw-in cutter concept simplifies tool inventory: fewer holder variants are needed when indexable inserts are standardised, and replacements are cost-efficient. Sourcing this component from Teknik Makina via Metav Werkzeuge combines manufacturer expertise with a local logistics partner, offering a streamlined supply chain and technical guidance when choosing inserts for specific machining tasks. Contact Metav Werkzeuge for tailored machining recommendations and to secure the Teknik Makina VT316TM screw-in milling cutter for LOGU 0303 operations; technical advisors are available to discuss insert choices and integration into existing tool systems Technical data SKU: VT316TM Label: 32mm Einschraubfräser LOGU 0303 L65mm Product: Screw-in milling cutter Brand: Teknik Makina Compatibility: LOGU 0303 indexable inserts (Kyocera) Core specifications Diameter: 32 mm Overall length: 65 mm Cutting height: 40 mm Thread height: 25 mm Thread: M16 Cutting edges: 5 Weight: 0.21 kg Torx key: T8 Torx screw: M3x7 Special features Screw-in mounting for secure clamping Designed for LOGU 0303 indexable inserts Compatible inserts manufacturer: Kyocera Compact design for reduced overhang FAQ Which indexable inserts fit this cutter? The VT316TM accepts LOGU 0303 indexable inserts; it is specified as compatible with Kyocera LOGU 0303 inserts for reliable fit and repeatable seating. What is the required clamping hardware and tool for assembly? Assembly requires the Torx screw M3x7 supplied with the cutter and a Torx key T8 for correct torque and repeatable clamp performance. How does the M16 screw-in thread benefit machining stability? The M16 screw-in interface reduces overhang and improves concentricity compared with adapter-based systems, increasing rigidity and lowering vibration during milling operations. Can this cutter be used with other brands of LOGU 0303 inserts? The tool is designed for LOGU 0303 geometry; inserts from Kyocera are specified as compatible, and other manufacturers producing the same insert geometry may also fit if dimensions match exactly. What part number should be referenced when ordering or requesting spare parts? Reference SKU VT316TM and the Teknik Makina designation when enquiring about the screw-in milling cutter or compatible fasteners. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of high material removal capacity, rigid M16 screw-in clamping and integrated internal coolant for longer insert life; order the 32 mm screw-in milling cutter VT316-1TM directly via Metav Werkzeuge or request advice from our technical consultants. Screw-in milling cutter VT316-1TM – 32 mm diameter with internal coolant (Teknik Makina) The screw-in milling cutter VT316-1TM is a compact, internally cooled tool for LOGU 0303 indexable inserts, engineered for reliable face and peripheral milling in CNC production environments. 32 mm diameter, compact L65 mm Internal coolant for improved chip control Five cutting edges for steady material removal M16 thread for secure screw-in clamping Measurable productivity through rigid clamping and efficient cutting The combination of a M16 thread and a substantial thread height (25 mm) provides a stable connection to the tool holder, reducing vibration and improving surface results. With five cutting edges, the tool balances material removal and finish quality while distributing cutting forces evenly, which helps maintain consistent cycle times. The externally visible specifications translate into tangible benefits on the shop floor: fewer interruptions for rework and a lower risk of unexpected tool changeovers. Coolant-through design for longer insert life and cleaner chips The internal coolant channel is designed to deliver cutting fluid directly to the cutting zone, reducing heat at the edge and promoting efficient chip evacuation. This targeted cooling helps protect the insert geometry and can extend service life under continuous operation. The cutter’s built-in coolant capability also supports higher consistent cut parameters while maintaining dimensional stability, making it suitable for demanding series production where process reliability is required. Compact form factor for flexible integration in production lines At 65 mm overall length and a 32 mm diameter, the tool is compact enough for tight machining envelopes yet long enough to reach typical workpiece contours. The lightweight design (0.21 kg) minimises tool overhang stress and helps maintain spindle balance. Compatibility with LOGU 0303 indexable inserts (Kyocera) and the standard T8 Torx interface with M3x7 Torx screws enables quick insert changes and straightforward inventory matching. The clear SKU VT316-1TM simplifies procurement and traceability in parts lists. Contact Metav Werkzeuge to discuss integration of the VT316-1TM into production, request application recommendations or arrange a supply from our Emmerich warehouse via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: VT316-1TM Product type: Screw-in milling cutter Compatible inserts: LOGU 0303 (Kyocera) Manufacturer: Teknik Makina Core specifications Diameter: 32 mm Overall length: 65 mm Thread: M16 Thread height: 25 mm Cutting edges: 5 Cutting-edge height: 40 mm Weight: 0.21 kg Features & versions Internal coolant: yes Torx key: T8 Torx screw: M3x7 Label: 32mm screw-in milling cutter LOGU 0303 L65mm with internal coolant FAQ Are LOGU 0303 inserts compatible with this cutter? Yes. The cutter accepts LOGU 0303 indexable inserts and is matched for Kyocera-style holders to ensure correct seating and cutting geometry. Does the tool support coolant-through machining? Yes. The internal coolant channel supplies fluid directly to the cutting zone, helping to control temperature and improve chip flow during machining. What thread and clamping are required for mounting? The tool uses an M16 screw-in thread with a 25 mm thread height for secure clamping; Torx screws (M3x7) are used for insert fixation and the Torx key size is T8. Which operations are best suited to this tool? Designed for face and peripheral milling, the cutter performs well in continuous production where a balance of material removal rate and surface quality is required. How are inserts changed and secured? Inserts are fastened with the supplied M3x7 Torx screws using a T8 key; the screw-in body simplifies replacement of the cutting head to reduce downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com