Gibt es einen Hahn und Kolb Online Shop?

Take advantage of the combination of a 25 mm shank for stable clamping, a 3 mm cutting width for precise narrow grooves and a 200 mm overall length for versatile reach, ensuring consistent parting and grooving performance; order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. Parting and grooving clamp holder K704TM — 25 mm shank, 3 mm cutting width by Teknik Makina A robust Parting and grooving clamp holder K704TM engineered for accurate narrow-grooving and parting operations on lathe workpieces, compatible with 3C indexable inserts. 25 mm shank for stable clamping 3 mm cutting width for narrow grooves 35 mm cutting height for deeper cuts Compatible with ISCAR 3C indexable inserts Stable clamping for repeatable grooves and parting operations The holder delivers stability through its 25 mm shank and a secure clamping layout derived from the 3C-R GRP designation. Stable tool support reduces vibration and tool deflection, which in turn improves surface quality and dimensional repeatability. The combination of a robust shank and a precisely located clamping block helps maintain cutting geometry over repeated cycles, making the tool appropriate where consistent groove width and repeatable parting lines are required. Precision narrow-grooving with defined cutting geometry Featuring a 3 mm cutting width and 35 mm cutting height, the design focuses on narrow-grooving tasks and controlled parting cuts. Narrow cutting widths limit material engagement and chip volume, easing chip evacuation and reducing cutting forces; this benefits both tool life and lathe spindle load. The holder suits operations where small kerf size and tight dimensional control are priorities, while the defined cutting height supports secure insert positioning for accurate depth control. Compatibility that streamlines inventory and setup Compatibility with 3C indexable inserts and the noted fit for ISCAR inserts simplifies tool procurement and reduces adapter complexity. Using a widely adopted insert format allows straightforward replacement and predictable cutting performance. The holder’s ISO-style shank reference S25R clarifies mounting requirements and assists process planners in matching the tool to existing tool posts and turret systems. Practical dimensions for workshop flexibility With a 200 mm overall length and a tool diameter of 32 mm, the holder offers reach without excessive overhang. The listed weight of 0.809 kg reflects a balance between rigidity and manageable handling during tool changes. These measured specifications aid in assessing suitability for particular lathes and part geometries and support rapid decision-making in production planning. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina K704TM and check stock availability at our Emmerich location via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K704TM Manufacturer: Teknik Makina Product: Parting and grooving clamp holder ECLASS: 21181005 Facts Shank diameter: 25 mm Cutting height: 35 mm Cutting width: 3 mm Overall length: 200 mm Tool diameter: 32 mm Weight: 0.809 kg Shank designation: S25R Special features Compatible with ISCAR 3C indexable inserts Clamping designation: 3C-R GRP Intended for parting and narrow-grooving tasks Robust clamp block for reduced vibration FAQ Which indexable inserts fit this holder? The holder accepts 3C indexable inserts; compatibility with ISCAR-format 3C plates is specified for the K704TM. What are the shank and mounting details? The tool has a 25 mm shank and the ISO-style designation S25R, which indicates the required shank mounting standard. What groove width and cutting height does it support? The clamp holder is configured for a 3 mm cutting width and a 35 mm cutting height, providing a defined kerf and secure insert seat. What are the overall length and weight for setup planning? Overall length is 200 mm and the weight is 0.809 kg, details useful for calculating reach and overhang in turret or toolpost setups. Is the holder suitable for different insert manufacturers? The design is specified for 3C inserts and lists ISCAR compatibility; alternative manufacturers offering the same 3C geometry should be compatible, subject to insert seating and clamping checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of high removal rates and secure clamping: the cutter’s 32 mm tool holder and 46 mm cutting height enable deeper passes while maintaining stiffness, and the compatibility with APKT 1003 inserts from Korloy keeps tooling costs predictable; order directly from Metav Werkzeuge or consult the specialists for integration advice. Igelfräser — Indexable insert milling cutter with 32 mm holder, 46 mm cutting height (Teknik Makina) A Igelfräser designed as an indexable milling head for efficient roughing and face milling applications, compatible with standard APKT 1003 inserts and tailored to stable, high‑material‑removal operations. 32 mm tool holder diameter Compatible with APKT 1003 inserts 46 mm effective cutting height 15 cutting edges for high material removal Faster cycle times with stable clamping and deeper cuts The combination of a 32 mm tool holder and a 46 mm cutting height delivers a balance of rigidity and reach that benefits high‑volume machining. This configuration reduces chatter and allows for more aggressive axial engagement, which in turn shortens cycle times and increases throughput. By accepting APKT 1003 indexable inserts, the head simplifies inventory management and keeps regrinding or retooling downtime to a minimum, so operational efficiency is improved without complex changeovers. Predictable performance through standardised inserts and secure fixing Compatibility with Korloy APKT 1003 inserts creates a predictable performance envelope: insert geometry and grade selection define cutting forces and surface finish, while the proven clamping method — fixed with M2.5x5.5 Torx screws and the T08 key — ensures repeatable seating and quick index changes. For workshops that value repeatability, this results in consistent part quality and lower scrap rates. The indexable system also supports cost‑efficient maintenance since worn inserts are exchanged rather than the whole cutter. Designed for heavy material removal with many cutting edges With 15 cutting edges, the cutter head distributes cutting load across multiple inserts, reducing per‑edge wear and enabling higher material removal per revolution. This arrangement is particularly effective on roughing passes and large surface engagements where productivity is prioritised. The head’s overall length of 200 mm gives sufficient overhang for common setups while keeping deflection low, and the modest mass of 1.144 kg contributes to controlled dynamics in spindle‑driven operations. Choose this Teknik Makina milling head for robust roughing performance and streamlined insert logistics — order through Metav Werkzeuge for reliable supply and application guidance from the Emmerich‑based specialists Technical Data Article number: HF17TM Manufacturer: Teknik Makina Diameter: 32 mm Tool holder diameter: 32 mm Effective cutting height: 46 mm Overall length: 200 mm Weight: 1.144 kg Cutting edges: 15 For indexable inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T08 FAQ What insert type does this milling head require? The milling head uses APKT 1003 indexable inserts; selecting the appropriate grade determines wear resistance and surface finish for the task. Is the cutter compatible with Korloy inserts? Yes — the tool is specified for use with inserts from Korloy, ensuring interchangeability with commonly stocked grades. What is the shank or holder diameter of the tool? The tool features a 32 mm tool holder diameter, providing a stable connection to the spindle or arbor. How deep can the cutter engage axially? The cutter provides an effective cutting height of 46 mm, enabling deeper axial cuts compared with short‑reach heads. Which fasteners are used for insert clamping? Inserts are secured with M2.5x5.5 Torx screws and a T08 Torx key for reliable, repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a combination of rapid material removal and simple insert service: the HF08TM provides a 32 mm cutting diameter with 15 cutting edges and is compatible with APKT 1003 indexable inserts for efficient milling operations. Order or discuss application details directly via Metav Werkzeuge for reliable supply and expert advice. Hedgehog cutter HF08TM — indexable insert milling cutter, Ø 32 mm, APKT 1003 compatible A Hedgehog cutter HF08TM engineered for insert-based milling where compact diameter and multiple cutting edges reduce cycle times in component machining Teknik Makina HF08TM, Ø 32 mm Compatible with APKT 1003 inserts (Korloy) 15 cutting edges for efficient removal Torx fixing M2.5x5.5, key T08 Faster throughput from compact geometry The milling head is designed to convert a modest footprint into substantial material removal. With a 32 mm diameter and 15 cutting edges, the tool reduces the number of passes required on many conventional operations, which translates into shorter cycle times and improved throughput. The use of APKT 1003 indexable inserts means cutting edges can be renewed instantly, keeping setup time low and production steady. Secure insert retention and straightforward servicing Maintenance is simplified by a standard Torx fixing system. The M2.5x5.5 Torx screw and T08 key allow secure clamping of inserts while enabling fast changes during shift breaks. The compact mass (approximately 0.627 kg) keeps spindle load predictable and makes balancing simpler, so downtime for maintenance is limited and repeatability is supported by a robust mechanical interface. Deep cutting capacity in a compact tool The cutter offers a substantial cutting height of 46 mm within an overall length of 120 mm, providing enough engagement for many profiling and face-milling tasks without excessive overhang. This geometry balances stiffness and accessibility: the effective cutting range helps to perform deeper passes where permitted by machining strategy, cutting fewer grooves and reducing time spent on finishing operations. Ready integration with common inserts and tooling systems Designed for indexable insert workflows, the head accepts APKT 1003 inserts and pairs well with Korloy-specified cutters, enabling straightforward procurement of replacement parts. The 32 mm shank diameter is compatible with standard collet and holder systems, which simplifies integration into existing tool assemblies and supports consistent clamping performance across multiple machines. Contact Metav Werkzeuge to discuss HF08TM application suitability, recommended inserts and delivery options — Metav Werkzeuge provides expert guidance and reliable supply from Emmerich. Technical data Article number: HF08TM Manufacturer: Teknik Makina Diameter: 32 mm Cutting edges: 15 Cutting height: 46 mm Overall length: 120 mm Shank diameter (aufnahme): 32 mm Weight: 0.627 kg Compatible insert: APKT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T08 Special features Indexable inserts for rapid edge renewal High cutting-edge count for improved material removal Compact overall length for reduced overhang Standard Torx fixing for simple servicing Suitable for insert-based milling operations FAQ Which inserts fit this cutter? The HF08TM is specified for APKT 1003 indexable inserts; the tool accepts inserts from Korloy as listed and is aligned with common APKT insert geometries. How are the inserts secured and changed? Inserts are clamped with a Torx screw (M2.5x5.5). A T08 key is used for removal and installation, allowing quick, secure service of the cutting edges. Can the head be used in standard toolholders? Yes. The shank (32 mm) matches common collet and holder interfaces, permitting straightforward integration into standard machining setups. What benefits does the high number of cutting edges bring? A larger number of cutting edges spreads wear and increases material removal per revolution, which often reduces the number of tool passes and improves productivity in batch and series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of quick insert changes, sturdy clamping and compact dimensions to keep machining cycles efficient and repeatable; order the tool via Metav Werkzeuge or consult our specialists for technical clarifications. Igelfräser HF12TM — 32 mm indexable-insert milling cutter (APKT 1003 compatible) by Teknik Makina The Igelfräser HF12TM is a compact indexable-insert milling cutter designed for high-efficiency peripheral milling with quick insert replacement and secure fastening for industrial shop-floor use Indexable APKT 1003 compatible 32 mm tool diameter 46 mm cutting height Secured with M2.5x5.5 Torx screws T08 Faster set-up through standardised inserts and secure fixing The HF12TM is built around compatibility with APKT 1003 indexable inserts, a common triangular insert format that simplifies inventory and replacement. By accepting standard inserts from manufacturers such as Korloy, the cutter reduces procurement complexity and downtime associated with bespoke tooling. The Torx M2.5x5.5 fixing screws and specified T08 key enable repeatable clamping torque, which supports consistent tool behaviour between changeovers. For production environments where set-up time equals lost minutes on the shop floor, the combination of standard inserts and secure screw fixing delivers a measurable improvement in process reliability. Compact dimensions that retain cutting capacity With a nominal diameter and shank of 32 mm and an overall length of 150 mm, this cutter offers a compact footprint while maintaining a significant cutting zone. The 46 mm cutting height and 15 cutting edges provide extended contact length suitable for continuous passes and shallow-step high-feed operations. The balanced geometry reduces vibration and supports stable chip formation; this stabilisation improves surface finish and reduces the likelihood of premature insert wear. The relatively modest mass (approx. 1.12 kg) further helps to limit spindle load and preserve spindle bearings during repetitive cycles. Practical handling and serviceability for workshop efficiency Designed for straightforward maintenance, the indexable concept removes the need for regrinding and enables quick in‑situ replacement of worn tips. The use of standardised APKT inserts means that stocking a small range of grades covers a wide array of routine tasks without complex logistics. The tool’s construction permits rapid inspection and replacement of the small Torx screws, keeping planned maintenance brief. Over time, this approach reduces total tooling cost and keeps machines productive by favouring predictable, fast service intervals rather than lengthy downtime. Where the cutter fits into production routines This indexable-insert milling solution is particularly well suited to workshops and production cells that prioritise predictable cycle times, low inventory complexity and fast recoverability after insert changes. The HF12TM functions as a flexible peripheral cutter in mixed-production contexts where standard inserts such as APKT 1003 are already used, allowing teams to harmonise tooling across machines. Where process planners aim to simplify tool control and ensure consistent clamping and repeatability, this cutter offers a balanced compromise between compact design and useful cutting engagement. For technical advice or stock details on the HF12TM from Teknik Cutting Tools, contact Metav Werkzeuge for precise availability information and application guidance at +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: HF12TM Manufacturer: Teknik Makina Product name: Igelfräser eClass: 21180806 ETIM: EC011860 Facts Diameter: 32 mm Shank/holder diameter: 32 mm Cutting height: 46 mm Overall length: 150 mm Weight: 1.12 kg Cutting edges: 15 Special features Compatible inserts: APKT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key size: T08 SKU: HF12TM FAQ Which insert type does this cutter accept? The cutter accepts APKT 1003 indexable inserts; the HF12TM is prepared for this common triangular insert geometry. Which insert brands are compatible with the tool? The HF12TM is compatible with inserts from Korloy and other suppliers offering APKT 1003-format inserts. What are the key dimensions to note for machine setup? Key dimensions are 32 mm diameter, 46 mm cutting height and 150 mm overall length for the HF12TM, which should be checked against spindle and toolholder clearance. How are the inserts secured? Inserts are fastened using M2.5x5.5 Torx screws; the specified key size is T08 for reliable clamping. Is this tool heavyweight for its size? At approximately 1.12 kg, the cutter offers a compact, balanced mass that is appropriate for most toolholders and reduces spindle load. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of an indexable design that reduces tooling cost while maintaining process stability: the combination of compatibility with APKT 1604 inserts and a robust 32 mm shank ensures dependable performance in serial milling. Order directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina HF30TM indexable milling cutter — Ø32 mm, 8‑edge system The HF30TM indexable milling cutter is an industrial milling head designed for slotting and profile milling with APKT 1604 inserts, suitable for production environments requiring quick insert changes and steady cutting performance Indexable cutter for APKT 1604 inserts Ø 32 mm shank for stable clamping 58 mm effective cutting height 8 cutting edges for continuous operation Precision and cost efficiency through indexable inserts The HF30TM is built around an indexable milling concept that lowers running costs by allowing individual insert replacement rather than discarding the whole head. Fitted for APKT 1604 inserts from Korloy, the tool provides a predictable wear pattern and controlled chip formation, which contributes to longer tool life and consistent surface quality. The use of standardised fixing hardware (M4x10, T15) reduces spare‑part complexity and speeds up maintenance routines, so cycle time loss during servicing is minimised. Stable geometry for accurate cuts and process reliability A sturdy Ø 32 mm holder and a generous 58 mm cutting height give the cutter a favourable stiffness-to-reach ratio, improving vibration damping and dimensional repeatability on longer overhangs. The tool’s overall length of 200 mm balances accessibility with rigidity, while the distribution of 8 cutting edges supports continuous machining without frequent index changes. For shop floors that prioritise repeatability, this configuration reduces rework and keeps throughput steady. Fast serviceability and predictable production planning Designed for fast insert changes and uncomplicated assembly, this indexable head simplifies toolroom logistics. The clear compatibility with APKT 1604 inserts and the specified screw standard (M4x10 / T15) mean that replacement parts and tightening tools are widely available, shortening downtime. The cutter’s mass (approx. 1.12 kg) aids stable engagement and helps maintain consistent feed and finish during feed-sensitive operations. Overall, the design supports efficient scheduling and fewer unexpected interruptions. For tailored advice on integrating the Teknik Makina HF30TM indexable milling cutter into existing processes or to secure supply via Metav Werkzeuge, contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists in Emmerich will support specification and logistics planning Technical data Article number: HF30TM Manufacturer: Teknik Makina Facts Diameter / shank: 32 mm Cutting height: 58 mm Overall length: 200 mm Number of cutting edges: 8 Weight: 1.12 kg Features Compatible with APKT 1604 inserts Recommended insert manufacturer: Korloy Fixing screws: M4x10, Torx T15 Indexable milling cutter design FAQ What inserts does this cutter accept? The HF30TM is configured for APKT 1604 indexable inserts; Korloy inserts are a recommended match for consistent performance. What is the shank diameter and how does it affect stability? The cutter uses a 32 mm shank; the larger shank diameter increases rigidity and reduces vibration compared with smaller holders, improving surface finish and dimensional control. How many cutting edges are available and what is the benefit? The tool carries 8 cutting edges, enabling sustained machining with fewer interruptions for index changes and better productivity on long runs. Which screws and key are required for insert replacement? Insert fastening uses M4x10 screws tightened with a T15 Torx key, a common standard that simplifies maintenance and spare stocking. Is the HF30TM suitable for automated tool racks and indexed tool changes? Yes — the standardised shank diameter and indexable insert format make the HF30TM compatible with automated tool systems that accommodate Ø32 mm holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of precise, indexable-insert milling with a compact Ø32 mm tool that combines a generous 43 mm cutting height and six cutting edges for steady productivity; order directly via Metav Werkzeuge or consult the technical team for application advice. HF20TM indexable insert cutter by Teknik Makina – Ø32 mm, 6 cutting edges A robust HF20TM indexable insert cutter designed for milling with Korloy APKT 1604 inserts, engineered for demanding finishing and semi-finishing applications where stability and fast insert changes matter *Compatible with Korloy APKT 1604 inserts *32 mm diameter for confined toolpaths *Six cutting edges for smooth material removal *43 mm cutting height and 125 mm overall length Consistent machining quality through insert compatibility and geometry The HF20TM is built as an indexable insert cutter that accepts Korloy APKT 1604 inserts, providing a predictable cutting geometry across operations. The Ø32 mm diameter and the arrangement of six cutting edges lead to reduced vibration and a more uniform surface finish when compared with single-edge alternatives. A 43 mm effective cutting height allows deeper engagement without frequent re‑tooling, which supports longer uninterrupted runs and improves process reliability in batch production. Faster tool changes and predictable maintenance intervals Tool maintenance is simplified by a standardised fastening system: inserts are secured with a M4x10 Torx screw and require a T15 key for removal. This design reduces downtime during insert replacement and ensures repeatable clamping force, which benefits tool life and cutting consistency. The compact mass (0.658 kg) and the 125 mm overall length contribute to a stable setup that is straightforward to balance in most milling spindles, helping to keep maintenance predictable and efficient. Easy integration into existing setups and process planning With a common shank and compatible insert type, the cutter integrates into standard tool cycles and holder systems that accept a 32 mm interface. The modular nature of indexable inserts makes the cutter cost‑effective for workshops that prefer replaceable cutting edges over full-tool regrinds. By selecting this cutter, production planners gain a tool that supports quick insert swaps, repeatable part quality and streamlined inventory management, which suits both small-series and larger production environments. Discuss the HF20TM indexable insert cutter with Metav Werkzeuge for tailored application advice and reliable supply from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: HF20TM Manufacturer: Teknik Makina Specifications Diameter: 32 mm Cutting height: 43 mm Cutting edges: 6 Overall length: 125 mm Weight: 0.658 kg Features / Compatibility Suitable for Korloy APKT 1604 inserts Torx screw: M4x10 Torx key: T15 ECLASS: 21180806 ETIM: EC011860 FAQ Which indexable inserts fit this cutter? The HF20TM indexable insert cutter accepts Korloy APKT 1604 inserts as specified, providing a standardised seating and clamping arrangement for reliable performance. What are the cutter’s main dimensions and cutting geometry? The cutter has a 32 mm diameter, 43 mm cutting height, six cutting edges and an overall length of 125 mm, optimised for stable finishing and semi‑finishing passes. How are the inserts fastened and serviced? Inserts are secured with a M4x10 Torx screw and require a T15 key for removal, enabling quick and repeatable insert changes. What milling tasks is this cutter suited to? This indexable insert cutter is intended for finishing and semi‑finishing milling operations where the use of replaceable inserts is preferred for economy and uptime. Does the cutter require a special holder or adapter? The cutter uses a 32 mm interface and is compatible with standard toolholders that accept a Ø32 mm shank; specific holder selection depends on the machine spindle and clamping method. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high-stability milling solution that combines standardised ADMX 0702 compatibility with a robust M16 screw-in design and an efficient Ø32 mm cutting diameter for consistent machining results; order the VT203TM directly via Metav Werkzeuge or consult our specialists for integration advice. VT203TM Screw-in milling cutter (Ø32 mm) for ADMX 0702 indexable inserts — Teknik Makina A VT203TM screw-in milling cutter engineered for reliable face and shoulder milling with ADMX 0702 indexable inserts, suited to production and maintenance environments where repeatable geometry and quick insert changes matter 32 mm diameter for compact milling M16 screw-in shank with 23 mm thread depth Fits ADMX 0702 indexable inserts by Pramet Eight cutting edges with 90° cutting angle Consistent results through standardised insert compatibility The screw-in design delivers a stable connection between tool body and machine by using a standard M16 thread and a defined 23 mm thread depth, which reduces runout and vibration during cuts. Compatibility with ADMX 0702 indexable inserts from Pramet allows for predictable chip control and straightforward replenishment of cutting edges. This standardisation simplifies tool management in busy shops and supports repeatable surface quality across batches. Geometry and edge count tuned for productivity A compact Ø32 mm tool body combined with a 43 mm cutting height and eight cutting edges means more usable edge length per cutter and longer intervals between indexings. The 90° cutting angle produces square shoulder finishes and helps to maintain dimensional stability during heavy radial engagement, while the multi-edge layout spreads wear and supports higher material removal rates. For operators new to indexable tooling, the cutting angle denotes the orientation of the cutting face relative to the workpiece and determines finish and load distribution. Practical assembly and low downtime in service routines Service and insert changes are expedited by the use of a single Torx clamping screw (Torx screw M2x4.2) secured with a T6 key, reducing maintenance time compared with multi-component clamps. The tool’s overall length of 66 mm and a net weight of 0.235 kg make handling straightforward when fitting into compact toolholders or storage systems. The screw-in arrangement also allows quick replacement of the cutter body without altering the machine spindle setup, supporting fast tool changes in production environments. For fast integration and supply from our European quality hub, contact Metav Werkzeuge in Emmerich for tailored advice on the VT203TM screw-in milling cutter — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss toolholders, insert choices and delivery timelines. Technical data Article number: VT203TM Name: Screw-in milling cutter for ADMX 0702 indexable inserts Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Core measurements Diameter: 32 mm Overall length: 66 mm Cutting height: 43 mm Thread depth: 23 mm Weight: 0.235 kg Cutting edges: 8 Cutting angle: 90° Design & special features Screw-in design with M16 thread Torx screw M2x4.2 Torx key T6 Fits ADMX 0702 indexable inserts Compatible with inserts by Pramet FAQ What insert type does this cutter accept? The VT203TM accepts ADMX 0702 indexable inserts, a standard size compatible with Pramet-manufactured grades. Is the tool suitable for shoulder milling and face operations? Yes, the screw-in cutter’s 90° cutting angle and Ø32 mm body are designed for both face and shoulder milling tasks. How many cutting edges are available before indexing? The tool body presents eight cutting edges, extending effective edge life and reducing the frequency of indexings. Which fastening hardware is used for the insert clamp? A single Torx screw (M2x4.2) secures the insert; the corresponding key size is T6, enabling quick and secure clamp changes. What thread and mounting interface does the cutter use? The cutter uses an M16 screw-in shank with a 23 mm thread depth for a positive and repeatable mounting interface. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a secure, screw‑in design with internal coolant and a robust M16 thread for repeatable clamping and consistent chip evacuation; the compatibility with EPMT 0603 indexable inserts ensures flexible tooling setups. Order directly via Metav Werkzeuge or consult our specialists for process optimisation. Screw-in cutter VT233-1TM — 32 mm, internal coolant, for EPMT 0603 indexable inserts (Teknik Cutting Tools) The Screw-in cutter VT233-1TM is a compact, coolant-fed milling head intended for machining operations that require repeatable clamping and high chip‑control performance with EPMT 0603 indexable inserts. 32 mm diameter for mid‑range milling Internal coolant for improved chip evacuation Secure M16 screw‑in mounting for stability Compatible with EPMT 0603 indexable inserts Consistent clamping and stable machining for repeatable parts The screw‑in design with an M16 thread delivers a compact, rigid connection to the holder, reducing runout and vibration for repeatable dimension control. With a 32 mm cutting diameter and a total length of 60 mm overall, the tool head is suited to close‑quarter operations where stability matters. The combination of the screw‑in mount and a defined 34.7 mm thread height gives secure axial support; this reduces the need for frequent rework and helps maintain process reliability in serial production. The rigid interface also contributes to tool life by limiting micro‑movements that accelerate insert wear. Efficient cooling and improved surface finishes Internal coolant is routed directly to the insert zone, promoting efficient chip breaking and evacuation while reducing heat at the cutting edge. This controlled cooling supports consistent cutting conditions and can help to extend the life of indexable inserts, particularly during interrupted cuts or heavier engagement. The head accepts EPMT 0603 inserts and features 5 cutting edges height of 25.3 mm, which together enable controlled material removal and reduce built‑up edge formation. For workshops and subcontractors focused on productivity, the coolant feed and compact head design translate into fewer stoppages and more predictable cycle times. Flexible compatibility for streamlined tooling Designed for use with EPMT 0603 indexable inserts and noted compatibility with Hitachi insert variants, the milling head integrates into common tooling systems and simplifies inventory. The Torx connection uses a T8 key and M2.5x5.5 Torx screw for secure insert fastening, enabling quick insert changes and minimising downtime. Weighing approximately 0.197 kg, the unit is easy to handle during setup while remaining substantial enough for demanding machining tasks. The combination of a standardised insert family and a compact screw‑in body supports flexible tool configurations on rotating toolholders and reduces the number of specialised heads required in the tool crib. Practical benefits for workshops and production cells This cutter head is engineered to be a practical addition to CNC toolsets: compact dimensions, internal coolant and a reliable mounting thread reduce setup complexity and improve first‑pass yields. The tool suits a range of applications where tool change speed and robust clamping are priorities, for example short‑run serial work and precision finishing passes. When integrated into a broader tooling strategy, the head helps to lower part variability and supports efficient supply chains thanks to its compatibility with widely used insert geometries. For advice on integrating the Teknik Cutting Tools screw‑in cutter VT233-1TM into an existing tooling setup, or to discuss process suitability with Metav Werkzeuge, contact our consultants at Metav Werkzeuge GmbH; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored recommendations. Technical data SKU: VT233-1TM Product type: Screw‑in cutter Brand: Teknik Cutting Tools Compatible inserts: EPMT 0603 Core specifications Diameter: 32 mm Overall length: 60 mm Thread: M16 Thread height: 34.7 mm Cutting edge height: 25.3 mm Number of cutting edges: 5 Weight: 0.197 kg Special features Internal coolant Torx key: T8 Torx screw: M2.5x5.5 Compatible with Hitachi insert variants FAQ Which insert size fits this cutter head? The cutter accepts EPMT 0603 indexable inserts; the VT233-1TM is configured specifically for that insert family. Is the tool coolant‑fed? Yes — the VT233-1TM features internal coolant to the insert zone for improved chip evacuation and thermal control. What mounting thread does the head use? The head uses an M16 screw‑in thread with a thread height of 34.7 mm to provide secure clamping. Which fastening hardware is required for the inserts? Inserts are secured with a Torx screw M2.5x5.5 using a T8 driver for reliable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust turning solution that combines secure clamping, compatibility with VCMT inserts and a compact footprint for reliable workshop performance — order the Klemmhalter SVJC for VCMT Indexable Inserts directly via Metav Werkzeuge or consult our specialists for tailored advice. Klemmhalter SVJC for VCMT Indexable Inserts — Right-hand holder, ISO SVJCR 3232 (Teknik Makina) A Klemmhalter SVJC for VCMT Indexable Inserts engineered for right-hand turning operations, offering rigid clamping and precise insert seating for VCMT 1604 inserts. Compatible with VCMT 1604 indexable inserts Right-hand cutting direction for standard turning ISO designation SVJCR 3232 for consistent fitting Robust 32 mm clamp height for stable cutting Engineered for predictable turning performance The holder is built to deliver stable cutting and repeatable results in routine turning work. The ISO SVJCR 3232 designation ensures a standardised fit with tool posts and tool holders, while the 32 mm clamp height provides a solid seating that reduces vibration and helps maintain surface finish. With a right-hand configuration, this toolholder is suited to conventional lathe set-ups where consistent chip control and predictable toolpath behaviour contribute directly to process reliability. Simple compatibility reduces set-up time Designed specifically for VCMT 1604 indexable inserts, the clamping geometry secures the insert reliably and simplifies index changes. The holder accepts the insert form and locates it accurately against the seat, which minimises regrinding or adjustment time between operations. The P16 designation for the shank interface aligns with common toolpost interfaces, and the tool’s 93° cutting angle offers a balance between strength and accessibility at the cut edge, reducing downtime and streamlining changeovers. Practical dimensions that suit everyday workshop demands Compact but robust, the holder’s 170 mm overall length and 40 mm cutting head width offer good reach without excess overhang, while the 32 mm holder width aids rigidity in confined set-ups. A 50 mm cutting height and a mass of 1.284 kg mean the component is substantial enough to resist deflection yet light enough for straightforward handling during mounting. These dimensional characteristics support efficient toolpaths and predictable machining forces, helping to extend insert life and maintain consistent part quality. For tailored technical advice or to secure the SVJC holder from Teknik Cutting Tools, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our advisers will assist with application-specific recommendations and order processing Technical Data SKU: D249TM Manufacturer: Teknik Makina ISO designation: SVJCR 3232 Compatible inserts: VCMT 1604 Cutting direction: right Clamp height: 32 mm Cutting head width: 40 mm Holder width: 32 mm Overall length: 170 mm Cutting height: 50 mm Weight: 1.284 kg Cutting angle: 93° Right-hand turning configuration For SVJC style holders for VCMT indexable inserts Shank designation: P16 FAQ What inserts fit this holder? The holder is made for VCMT 1604 indexable inserts; compatibility is ensured by the SVJCR 3232 ISO seating used in the design. Is the holder left- or right-hand? This toolholder is configured for right-hand cutting direction and is therefore intended for standard right-hand turning operations. Does the holder require a special shank or interface? The clamping holder uses the P16 shank designation and the ISO SVJCR form, compatible with common toolpost interfaces that accept this standard. How do the dimensions affect stability and reach? With a 32 mm clamp height, 40 mm cutting head width and 170 mm overall length, the holder balances reach and rigidity to reduce deflection and support consistent insert life Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise indexable-insert compatibility, stable left-hand orientation and compact dimensions for reliable turning performance; order the toolholder directly via Metav Werkzeuge or consult the technical advisors for integration guidance. DCLN clamping holder for CN-- indexable inserts (DCLNL 3232) – left-hand turning toolholder by Teknik Makina The DCLN clamping holder is a left-hand turning toolholder engineered for use with CN-- 1606 indexable inserts, offering a compact 170 mm overall length for close-quarter and stable lathe operations. DCLNL 3232 mounting for CN-- 1606 inserts Left-hand cutting orientation for turning Robust 170 mm overall length, 1.407 kg Precision clamping with 95° cutting angle Precision and process stability for left-hand turning The holder is built around the DCLNL 3232 form, delivering a defined tool geometry with a 95° cutting angle that promotes consistent chip formation and predictable cutting forces. This geometry supports stable insert seating and reduces the need for corrective finish passes; the result is improved machining repeatability and shorter cycle-time variance. The controlled geometry is particularly beneficial where left-hand orientation is required for specific spindle or workpiece set-ups, enabling a rational improvement in throughput without speculative claims. Clear specification for set-up and reach Key dimensional values are disclosed to facilitate rapid integration: 170 mm overall length, head width 40 mm, holder height 32 mm, holder width 32 mm and cutting height 36 mm. The component weight of 1.407 kg signals a solid build that helps dampen vibration and maintain cutting line. The tool accepts CN-- 1606 indexable inserts and is compatible with shank designation P16, making it suitable for a wide range of standard turning fixtures. These measurable characteristics allow accurate tool-offset programming and dependable fixturing in production planning. Secure clamping and operational benefits Designed as a clamping solution rather than a disposable unit, the item provides a dependable seating for indexable inserts that simplifies repeat installation and inspection. The left-hand orientation and ISO designation support predictable assembly and replacement procedures on the shopfloor, while the mass and form factor contribute to rigidity during cuts. Where changeover speed and predictable tool life are priorities, this holder reduces setup iteration and supports consistent surface finish without introducing speculative performance claims. Contact Metav Werkzeuge today to discuss technical integration of the DCLN left-hand clamping holder or to request specific compatibility details from Metav Werkzeuge in Emmerich. Technical Data SKU: D306TM Manufacturer: Teknik Makina Article designation: DCLN for CN-- Indexable Inserts (DCLNL 3232) Facts Overall length: 170 mm Weight: 1.407 kg Cutting head width: 40 mm Holder height: 32 mm Holder width: 32 mm Cutting height: 36 mm Cutting angle: 95° Cutting direction: left For indexable inserts: CN-- 1606 Shank designation: P16 Special features ISO designation: DCLNL 3232 Left-hand turning orientation Suitable for CN-- 1606 indexable inserts Solid, compact toolholder form factor FAQ Which inserts fit this clamping holder? The holder is specified for CN-- 1606 indexable inserts; the DCLNL 3232 form ensures correct seating and repeatable geometry for those inserts. Is the DCLN clamping holder left-hand or right-hand? This toolholder is a left-hand turning unit, designed for operations where the cutting direction is left-oriented; referenced as SKU D306TM in technical documentation. What are the key dimensions to consider when planning set-up? Important dimensions include 170 mm overall length, head width 40 mm, holder height 32 mm, holder width 32 mm and cutting height 36 mm, all of which determine clearances and offset programming. Can this holder be mounted in standard tool posts? The DCLN clamping holder uses a common form factor with shank designation P16, enabling mounting in fixtures that accept this designation; compatibility depends on the tool post specification. Who manufactures this toolholder and what is the SKU for ordering? The item is supplied by Teknik Makina and listed as SKU D306TM for ordering and inventory reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of precise clamping, a rigid 32 mm shank and easy insert replacement for reliable milling cycles and reduced downtime; order via Metav Werkzeuge or consult the technical team for application support. Teknik Makina Shank Milling Cutter S504TM — 32 mm diameter, 4-cutting-edge indexable-insert cutter Teknik Makina Shank Milling Cutter S504TM is designed for heavy-duty shank-mounted milling with ADMT 1204 indexable inserts, offering square‑shoulder capability and a compact overall length for machine clearance 32 mm diameter, rigid shank 4 cutting edges for balanced cutting Compatible with ADMT 1204 indexable inserts Torx screw M3×7 and T8 key specification Faster, more consistent material removal with fewer tool changes The S504TM is a shank-mounted milling cutter engineered to work with ADMT 1204 indexable inserts, providing efficient chip formation while keeping change‑over simple. The combination of a 32 mm diameter and 4 cutting edges creates a stabilised cutting process that reduces vibration and supports consistent surface quality. With a 90° cutting angle, the cutter is suitable for operations that require true square shoulders, meaning fewer finishing passes are needed and cycle times are reduced. The modular insert system also makes edge changes quick and repeatable, lowering toolroom downtime without complex maintenance. Robust clamping and straightforward serviceability for production environments A rigid shank diameter of 32 mm and a compact 150 mm overall length deliver high stiffness at the cutting zone, improving dimensional stability during heavy cuts. Fastening is secured with a Torx screw M3x7, tightened with a T8 key, which ensures repeatable clamp force and simple servicing on the shop floor. The cutter’s mass—approximately 0.932 kg—strikes a balance between rigidity and handling, aiding spindle dynamics while remaining straightforward to mount. Because the tool accepts standard ADMT 1204 inserts (as supplied by Walter), procurement and stocking are simplified. Clear setup and application advantages for daily machining tasks With a 50 mm cutting length and a design tailored to indexable-insert use, the tool is well suited to face and shoulder milling tasks where accurate right‑angled cuts are required. The use of replaceable inserts keeps the body service life long and allows for quick reconditioning of cutting geometry by swapping worn inserts rather than replacing the entire tool. The cutter’s geometry supports predictable toolpaths and reliable tolerances in routine production; for specialised materials or bespoke programmes, consult the technical advisers at Metav Werkzeuge to align insert grade and cutting data with the intended workpiece. Contact Metav Werkzeuge for tailored application advice and procurement from our Emmerich distribution centre; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with selection and compatibility of the Teknik Makina S504TM Technical data Article number: S504TM Manufacturer: Teknik Makina Designation: Shank milling cutter for ADMT 1204 indexable inserts Brand SKU: S504TM Facts Cutting diameter: 32 mm Shank diameter: 32 mm Cutting length: 50 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.932 kg Cutting angle: 90° Special features Compatible with ADMT 1204 indexable inserts Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key size: T8 FAQ Which inserts fit this cutter? The cutter accepts ADMT 1204 indexable inserts; compatibility was specified for ADMT 1204 and is standard for the Teknik Makina S504TM. Is the S504TM suitable for square‑shoulder milling? Yes, the 90° cutting angle and the 32 mm diameter provide the geometry required for accurate square shoulders in general milling operations. What fastening hardware is required for insert clamping? Insert clamping on the S504TM is retained by a Torx screw M3x7; a T8 key is used to secure or replace the inserts. How long is the cutting zone and how does that affect setup? The tool offers a 50 mm cutting length, providing a clear working area for shoulder and face milling without excessive overhang, which helps maintain rigidity during setup. Can standard Walter inserts be used directly? Yes, the cutter is specified as compatible with inserts from Walter that meet the ADMT 1204 designation, simplifying procurement and stock management. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact holder that combines precise insert compatibility and robust clamping for efficient milling operations; the tool delivers consistent results with a 32 mm cutting diameter and a secure 25 mm shank. Order the tool directly via Metav Werkzeuge or ask their consultants for processing recommendations. Shank milling cutter R320TM by Teknik Makina — 32 mm diameter, for RPMW 10T3 The Shank milling cutter R320TM is a purpose-built toolholder for indexable RPMW 10T3 inserts, designed to provide stable, repeatable performance in general milling applications. Compatible with RPMW 10T3 Korloy inserts Solid 25 mm shank for secure clamping 32 mm cutting diameter for versatile milling Securing screw M3.5x8.5, Torx T15 interface Consistent process results through measured geometry and indexable compatibility The R320TM holder pairs a controlled cutter geometry with standard indexable inserts to deliver repeatable machining. The tool accepts RPMW 10T3 inserts, a common form factor that simplifies tool procurement and reduces set‑up variance. With a 32 mm diameter and 4 cutting edges, the design spreads cutting forces across several teeth, which lowers vibration and improves surface finish. For production planning, that means fewer interruptions for regrinding and a steadier cycle time, translating into measurable throughput gains on typical milling tasks. Secure clamping and simple serviceability reduce downtime A robust 25 mm shank ensures rigid clamping in conventional toolholders and minimises runout at the spindle nose, while the dedicated securing screw specification (M3.5x8.5, Torx T15) defines a clear maintenance procedure. The retention method is straightforward: the specified Torx drive provides a reliable torque interface for repeatable insert fixation without complex fixtures. This configuration shortens maintenance intervals and supports predictable tool life, which is particularly valuable in mixed‑batch production or when using the tool across several machines. Compatibility that supports flexible application planning By accepting Korloy‑compatible RPMW 10T3 inserts, the holder integrates into existing tooling stocks and cutter systems without the need for bespoke inserts. The overall length of 200 mm gives adequate reach for many setups while maintaining stability during side‑cutting or face‑milling operations. The combination of standard insert format, clear screw and key dimensions and a sturdy shank enables straightforward tool management in workshop environments and helps to harmonise inventories across production lines. For procurement advice or to secure the R320TM shank milling cutter from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for fast, reliable supply and expert application support. Technical data Article number: R320TM Manufacturer: Teknik Makina Brand SKU: R320TM Eclass: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 32 mm Shank diameter: 25 mm Overall length: 200 mm Number of cutting edges: 4 Features & compatibility For indexable inserts: RPMW 10T3 Compatible insert manufacturer: Korloy Securing screw: M3.5x8.5 Torx key size: T15 Tool type: Shank milling cutter / holder FAQ What insert type does the holder accept? The R320TM accepts RPMW 10T3 indexable inserts; this is the specified insert form for the holder and enables use of standard Korloy grades. What are the key dimensions to check for machine compatibility? Check the 25 mm shank diameter, the 200 mm overall length, and the required toolholder interface; these dimensions determine secure mounting and adequate reach. Which screw and driver are required to fit inserts? The holder uses a securing screw sized M3.5x8.5 with a Torx T15 drive for insert clamping and maintenance. Is the tool suitable for face milling and side milling? Yes, the combination of a 32 mm cutting diameter and four cutting edges makes the holder suitable for both face and light side‑milling operations in a wide range of workshop tasks. Can the R320TM be used with inserts from other manufacturers? Compatibility is defined by the RPMW 10T3 form; any insert matching that geometry and clamping style should fit, though Korloy grades are the specified matching manufacturer. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust clamping, precise indexable-insert compatibility and compact overall length for uninterrupted milling operations. Order the shank cutter directly via Metav Werkzeuge or consult our specialists for application-specific setup and insert recommendations. Teknik Makina S841TM shank cutter – Ø32 mm, for XNKT 0604 indexable inserts The S841TM shank cutter is an indexable-insert milling tool designed for secure, repeatable machining with XNKT 0604 inserts; ideal where rigidity and fast insert changes matter Ø32 mm shank diameter 40 mm cutting length Compatible with XNKT 0604 inserts Torx screw M3x7, key T8 Consistent chip control and predictable cutting results The S841TM is engineered for milling with indexable inserts, using four cutting edges to maintain stable engagement and predictable chip formation. By accepting XNKT 0604 inserts from Korloy, the tool enables quick index changes and reduced tool handling time. The 90° cutting angle supports square shoulders and effective face milling, while the indexable system separates cutting material from the holder so wear is limited to the replaceable inserts, lowering ongoing tooling costs and simplifying inventory. Rigid shank and compact geometry for vibration-free performance A 32 mm shank diameter and a 150 mm overall length give the holder a compact, rigid footprint that minimises deflection during cutting. The 40 mm effective cutting length balances reach with stiffness, helping to maintain surface finish and dimensional accuracy. Secure clamping is ensured via the Torx M3x7 fastening screw with T8 key, which provides consistent insert seating and repeatable positioning—reducing set-up time and the need for frequent re-torque checks. Designed for flexible milling workflows and fast reconditioning As an indexable-insert holder, the cutter is intended for use across standard milling operations when paired with the appropriate insert geometry and grade. The replaceable nature of the inserts makes the system versatile: a single holder can serve multiple jobs simply by selecting inserts optimised for roughing or finishing. Application parameters such as feed, depth of cut and insert grade should be chosen to match the workpiece material; Metav Werkzeuge can advise on insert selection and cutting data to suit specific tasks. Low-maintenance handling and predictable service routines Maintenance is straightforward: change worn inserts, inspect the seat for chips and secure the Torx screw to the specified torque. The modular design reduces downtime because failures are typically limited to the insert rather than the holder. The compact weight and balanced configuration also make the product easy to handle and integrate into existing tool assemblies, contributing to smoother tool exchanges and fewer interruptions on the shopfloor. For a practical upgrade to indexable-insert milling, contact Metav Werkzeuge to discuss the S841TM and obtain recommended Korloy inserts for intended applications; Metav’s specialists will advise on optimal setup and procurement. Technical Data Article number: S841TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 4 Overall length: 150 mm Weight: 0.941 kg Cutting angle: 90° Diameter: 32 mm Special features Compatible inserts: XNKT 0604 Compatible insert manufacturer: Korloy Torx screw: M3x7, key T8 Indexable-insert holder design FAQ Which inserts fit this cutter? The holder accepts XNKT 0604 indexable inserts; for the S841TM by Teknik Makina, choose the appropriate Korloy grade and geometry for the required finish and material. What is the shank diameter and overall length? The S841TM shank cutter has a 32 mm shank diameter and an overall length of 150 mm, providing a compact and rigid solution for many milling setups. How many cutting edges does the tool provide? This indexable holder uses 4 cutting edges (one per insert position) when fitted with the corresponding XNKT 0604 inserts for balanced engagement. What fastening hardware is required for insert clamping? Insert clamping uses a Torx M3x7 screw tightened with a T8 key; consistent torque ensures correct insert seating and repeatable positioning for the S841TM. Can the holder be reconditioned or repaired? Wear is typically confined to the replaceable inserts; the S841TM holder should be inspected for seat damage and cleaned when inserts are changed to maintain repeatable performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Product Technical Details: Order Number: VT143TM Item: Modular End Mill usable with APKT 1003 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 32mm Cutting Edges: 4 Weight: 0.195kg Total length: 60mm Cutting Height: 35.5mm Thread: M16 Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com

Take advantage of the S25S MTENR design with a 60° cutting angle and a 25 mm shank to achieve stable, high-precision turning with TNMG 1604 inserts; this combination supports consistent chip control and long tool life. Order directly via Metav Werkzeuge or contact their consultants for specification checks and application advice. Boring bar S25S MTENR — MTENR for TNMG 1604 indexable inserts by Teknik Makina — 60° cutting angle, right-hand Boring bar S25S MTENR for precision turning and insert clamping; designed for TNMG 1604 indexable inserts and right-hand cutting in CNC turning applications S25S MTENR holder for TNMG 1604 inserts 60° cutting angle for versatile turning 25 mm shank for rigid clamping 250 mm overall length for deeper reach Stable clamping for repeatable turning results The S25S MTENR toolholder prioritises rigidity and repeatability. With a 25 mm shank and a nominal body diameter of 32 mm, the bar resists deflection under load, delivering consistent engagement of the TNMG 1604 insert. The robust geometry and clamping arrangement reduce vibration, which helps to extend insert life and maintain surface finish — a clear efficiency gain for batch and single-piece production alike. The design supports right-hand cutting and a 60° cutting angle, offering a balance between strength and access for common turning profiles. Workpiece-focused performance and predictable tool life Built for standardised indexable inserts, the holder enables fast insert changes and predictable machining cycles. The compatibility with TNMG 1604 insert geometry ensures familiar chip formation and stable cutting forces, which translates to lower setup times and predictable maintenance intervals. At a weight of 0.96 kg and an overall length of 250 mm, the assembly remains manageable in automated tool turrets while providing enough overhang for medium-depth turning tasks. This combination enhances process reliability and helps to reduce unplanned downtime. Practical benefits for workshop and production planning The toolholder’s 55 mm cutting height provides correct seating for TNMG inserts, simplifying tool presetting and reducing the need for shimming. The S25S MTENR designation identifies the shank and mounting form, assisting toolroom inventory management and preventing mix-ups during rapid tool changes. For operations migrating inserts across machines, the standardised interface and right-hand orientation streamline tool allocation and spare-part planning, supporting lean stock management and lower tooling costs over time. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina S25S MTENR boring bar; technical consultants are available by phone or email to confirm suitability for specific machining tasks and to recommend compatible inserts and clamping arrangements Technical Data SKU: K456TM Manufacturer: Teknik Makina Shank diameter: 25 mm Body diameter: 32 mm Overall length: 250 mm Cutting height: 55 mm Cutting angle: 60° Cutting direction: right Compatible inserts: TNMG 1604 Weight: 0.96 kg ISO designation: S25S MTENR Title: Bohrstange 60° Wendeplatten TNMG 1604 Model: MTENR for TNMG 1604 Indexable Inserts FAQ What inserts fit this boring bar? The S25S MTENR boring bar is designed for TNMG 1604 indexable inserts and secures them at the specified 55 mm cutting height for correct geometry and chip control. Is the tool suitable for right-hand cutting only? Yes, the holder is configured for right-hand cutting, matching the listed cutting direction and the 60° cutting angle for standard turning operations. How long is the bar and how does that affect stiffness? The overall length is 250 mm; combined with a 25 mm shank, this provides a practical reach while maintaining sufficient rigidity for medium-depth turning. Can this holder be used in automated tool turrets? The mass of 0.96 kg and standardised ISO designation make the holder compatible with many turret systems; users should verify turret clamping and tool offset capacity before fitting. What is the SKU and who manufactures the tool? The item is listed as K456TM and is manufactured by Teknik Makina; the S25S MTENR designation identifies the shank type and mounting form. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Robust right‑hand clamping performance with ISO MTJNR 3232, a 93° cutting angle and 170 mm overall length for extended reach; combine stability, repeatable clamping and compatibility with TN-- 2204 inserts. Order the Klemmhalter directly via Metav Werkzeuge or ask our consultants if needed. Klemmhalter MTJN for TN-- Indexable Inserts — Right‑hand turning toolholder, ISO MTJNR 3232 (Teknik Makina) The Klemmhalter is a right‑hand turning toolholder engineered for external turning with TN-- 2204 indexable inserts, offering a compact clamping head and long‑reach shank for stable machining in workshop and light industrial production Right‑hand holder ISO MTJNR 3232 Compatible with TN-- 2204 inserts 170 mm overall length for extended reach P22 shank, 1.348 kg for stable cutting Precision where consistent surface finish is required The holder delivers repeatable clamping and controlled cutting geometry by combining a 93° cutting angle with a compact clamping head. This geometry reduces deflection and improves chip control when using TN-- 2204 indexable inserts, which in turn helps to maintain tolerances and surface finish across serial runs. The ISO MTJNR 3232 designation ensures compatibility with standardised tool stations and makes tool changes predictable and traceable in mixed fleets. Stable construction for lower vibration and predictable tool life Designed with a substantial mass and rigid shank, the toolholder’s 1.348 kg weight and P22 shank contribute to vibration damping and cutting stability. The 170 mm overall length gives extra reach for external turning without sacrificing rigidity, while the 40 mm cutting head width and 32 mm holder height are dimensioned for controlled tool overhang. These mechanical characteristics translate into fewer tool re‑sets, less scrap and more reliable cycle times on the shop floor. Practical benefits for everyday turning operations As a right‑hand toolholder for indexable inserts, this solution suits common external turning tasks where quick index changes and machine uptime are priorities. The holder’s shape and cutting height support effective insert seating and secure clamping, reducing the time needed for adjustment. For operations targeting productivity, the combination of stable geometry and standard ISO compatibility makes integration into existing tool inventories straightforward, supporting efficient setup and less downtime between jobs. For technical clarification or to secure this Teknik Cutting Tools holder from Metav Werkzeuge — with reliable supply from Emmerich and expert advice available — contact Metav Werkzeuge for a customised quotation or specification check. Technical data Article number: D204TM Manufacturer: Teknik Makina Designation: MTJN for TN-- Indexable Inserts (Klemmhalter) Direction: right Overall length: 170 mm Cutting head width: 40 mm Holder width: 32 mm Holder height: 32 mm Cutting height: 40 mm Cutting angle: 93° Weight: 1.348 kg Compatible inserts: TN-- 2204 ISO designation: MTJNR 3232 Shank designation: P22 SKU: D204TM FAQ Which inserts fit this holder? The holder accepts TN-- 2204 indexable inserts; the clamping geometry is designed for secure seating of that insert family in the MTJN pocket. Is this a right‑hand or left‑hand tool? This is a right‑hand turning toolholder, specified for right‑hand cutting operations and listed under ISO MTJNR 3232. What are the key dimensions to check before ordering? Important dimensions include the 170 mm overall length, 40 mm cutting head width, 32 mm holder height and a cutting height of 40 mm; the weight is 1.348 kg. For which applications is this toolholder best suited? The holder is optimised for external turning with TN-- type indexable inserts, providing stability for serial machining and good reach where tool overhang must be limited. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of stable clamping, a 107.5° cutting geometry and broad compatibility with TNMG 1604 indexable inserts to maintain productive turning cycles; order directly via Metav Werkzeuge or contact the technical team for further clarification. Boring Bar 107.5° for TNMG 1604 Indexable Inserts — Teknik Makina, right-hand, 25 mm shank The Boring Bar 107.5° for TNMG 1604 Indexable Inserts is a right-hand internal turning tool engineered for precision profiling and finishing in industrial turning applications, compatible with common TNMG indexable insert systems. Boring bar with 107.5° cutting angle For TNMG 1604 indexable inserts 25 mm shank diameter for rigid clamping 250 mm overall length, right-hand design Higher cutting reliability through geometry and insert compatibility The combination of a 107.5° cutting angle and support for TNMG 1604 indexable inserts provides a practical balance between approach access and effective chip control. This geometry reduces radial cutting forces in finishing passes, which in turn lowers the risk of chatter and contributes to improved surface quality. The use of standard indexable inserts enables quick regrinding or replacement, reducing downtime and supporting predictable cutting performance across batch work and single-part production. Stable clamping and reach for consistent machining Designed with a 25 mm shank and an overall length of 250 mm, the tool delivers the necessary rigidity for reliable bore finishing while offering sufficient reach for medium-depth operations. The specified 32 mm diameter and the ISO designation S25S MTQNR indicate a holder-form suited to secure clamping systems, supporting repeatable concentricity and minimised runout. Right-hand cutting orientation is integrated into the tool geometry to match standard lathe setups and common turning cycles. Economical operation and simple integration into existing tooling systems Acceptance of TNMG 1604 inserts and the familiar ISO holder format allow straightforward integration into established tool inventories, lowering tooling costs through the use of widely available inserts. The modular nature of indexable insert systems shortens service intervals since only the insert requires replacement or rotation, not the entire bar. With a mass of 0.942 kg the bar balances manageable handling with sufficient mass to dampen vibrations, supporting both finishing and light roughing tasks when combined with appropriate feeds and speeds. Contact Metav Werkzeuge for availability details and guidance on integrating the Teknik Makina K365TM boring bar into existing tool setups, or request tailored technical advice from the Metav specialists located in Emmerich Technical data Article number: K365TM Manufacturer: Teknik Cutting Tools ISO designation: S25S MTQNR Cutting direction: right Measurements Shank diameter: 25 mm Diameter: 32 mm Cutting height: 50 mm Overall length: 250 mm Weight: 0.942 kg Cutting angle: 107.5° Features Compatible inserts: TNMG 1604 Insert designation (en): MTWN for TNMG Indexable Inserts Right-hand operation FAQ Which inserts fit this boring bar? The boring bar accepts TNMG 1604 indexable inserts; this compatibility is specified for the Teknik Makina K365TM and supports standard TNMG grades for finishing and general-purpose turning. What are the key dimensions for toolholding? Relevant dimensions include a 25 mm shank diameter, 250 mm overall length and a 32 mm diameter, as indicated for the Teknik Makina K365TM. Is the cutting orientation right-hand or left-hand? The tool is configured for right-hand cutting; this orientation suits conventional lathe setups and is part of the K365TM specification. What is the ISO designation and what does it imply? The ISO designation S25S MTQNR denotes the holder form and clamping interface; it ensures compatibility with standard clamping fixtures and simplifies exchange in modular toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the DCLNL 3232 combination of secure clamping and standard ISO compatibility to increase turning stability and simplify tool inventory; order and supply coordination is available through Metav Werkzeuge for reliable delivery and advice. DCLNL 3232 Clamping Toolholder DCLN for CN-- Indexable Inserts, left‑hand A DCLNL 3232 clamping toolholder engineered for left‑hand external turning operations with CN-- 1204 indexable inserts, designed to deliver stable cutting performance and straightforward insert replacement Left‑hand turning orientation Accepts CN-- 1204 indexable inserts Robust 170 mm overall length 32 mm shank height for secure clamping Greater process stability through secure clamping The holder provides secure clamping via a 32 mm shank height and a firm head width, reducing vibration and producing more consistent surface finishes. With an ISO designation of DCLNL 3232, the component aligns with industry standards for indexable turning, allowing predictable seating of CN-- 1204 inserts. The 95° cutting angle positions the insert for controlled material removal, helping to extend insert life and maintain repeatable dimensional results on external turning tasks. Compatibility and practical integration for production layouts Built with a 170 mm overall length and a weight of 1.379 kg, the toolholder integrates easily into lathe setups that require left‑hand orientation. It is designed for use with standard tool posts and references the boring‑bar designation P12, allowing straightforward mounting and interchangeability. The arrangement simplifies stocking and reduces setup time, since the holder accepts commonly used indexable plates and follows the ISO format, which makes changeovers faster under production conditions. Reduced downtime and predictable maintenance routines A predictable clamping concept and clear geometry—including a 30 mm cutting height and 40 mm head width—enable quick insert changes and routine checks without complex adjustments. The robust construction contributes to stable toolholding during heavy cuts, while the standardised design supports routine maintenance practices and inventory control. For workshops aiming for consistent cycle times and workmanship, the holder delivers measurable benefits in uptime and process reliability. For tailored supply and technical advice on the DCLNL 3232 clamping toolholder from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for delivery and compatibility guidance. Technical data Article number: D305TM Name: DCLN for CN-- Indexable Inserts Manufacturer: Teknik Makina ISO designation: DCLNL 3232 Cutting direction: Left Compatible inserts: CN-- 1204 Numerical data Overall length: 170 mm Shank height: 32 mm Head width: 40 mm Shank width: 32 mm Cutting height: 30 mm Cutting angle: 95° Weight: 1.379 kg ECLASS: 21181004 Features & compatibility Boring bar designation: P12 For CN-- 1204 indexable inserts Files: 62de7ed7148ec6b71020ffb4, 62de7e390f56dbb4de4dbef9 Left‑hand orientation for specific turning setups FAQ What inserts fit this toolholder? The holder is specified for CN-- 1204 indexable inserts and seats them in the ISO DCLNL 3232 arrangement to ensure correct positioning and secure clamping. Is the holder suitable for right‑hand turning? This toolholder is configured for left‑hand cutting direction; use the corresponding right‑hand version for right‑hand operations. What are the key dimensions to check for machine compatibility? Important dimensions include a 32 mm shank height, 170 mm overall length, 40 mm head width, and a 30 mm cutting height—these determine clearance and mounting on the tool post. How does the 95° cutting angle affect turning? The 95° cutting angle offers a geometry that balances effective material removal with stable insert support, improving surface finish and tool life in external turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise internal turning thanks to a rigid left‑hand boring bar with a 25 mm shank and compatibility with DC-- 11T3 indexable inserts; the 200 mm overall length and 40 mm cutting height deliver stable machining. Order the tool via Metav Werkzeuge or consult our advisors for application-specific guidance. Boring bar K262TM (SDUC for DC-- Indexable Inserts) — 25 mm shank, left‑hand, Teknik Makina A Boring bar K262TM engineered for internal turning with SDUC‑style pockets, optimised for left‑hand cutting in CNC lathes and turning centres. 25 mm shank diameter Compatible with DC-- 11T3 inserts Left‑hand cutting orientation 200 mm overall length Built for rigidity and stable machining The design prioritises rigidity to reduce vibration in internal turning operations. A 25 mm shank combined with a 32 mm outside diameter and 200 mm overall length increases the tool’s resistance to deflection, which helps to preserve dimensional accuracy when boring. The 40 mm cutting height and a 93° cutting angle provide a stable interface between insert and workpiece, so the process becomes more repeatable and less dependent on machine tuning. Reliable insert interface and quick changeover Featuring an SDUC pocket for indexable inserts, the bar accepts DC-- 11T3 grades, providing access to a broad range of insert geometries and coatings for different machining tasks. The S25R SDUCL ISO designation describes the holder geometry and the left‑hand orientation, ensuring consistent locating and clamping of each insert. This standardised interface simplifies tool replacement and reduces machine downtime during insert changes. Integration into workshop workflows Left‑hand cutting orientation and compact proportions make the tool suitable for a variety of internal turning setups on CNC lathes and machining centres. The combination of left‑hand cutting and a secure SDUC pocket enables efficient chip evacuation and repeatable tool positioning, which supports both finishing passes and controlled stock removal when paired with the appropriate insert grades. The modest weight of the assembly aids handling and fixture stability during tool exchange. Supply reliability and industry partnership Sourcing TekniK Makina tooling through Metav brings process confidence: Metav acts as a practical quality filter for the European market and maintains a broad portfolio, ensuring availability for production demands. The partnership supports consistent delivery and technical advice from a supplier experienced in precision tools and workshop equipment, contributing to uninterrupted machining workflows. For specification assistance or stock information on the Teknik Makina SDUC boring bar K262TM, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K262TM Designation: Boring bar, SDUC for DC-- indexable inserts Manufacturer: Teknik Cutting Tools ISO designation: S25R SDUCL Facts Shank diameter: 25 mm Cutting height: 40 mm Weight: 0.748 kg Diameter: 32 mm Overall length: 200 mm Cutting angle: 93° Cutting direction: left Special features Compatible with DC-- 11T3 indexable inserts SDUC pocket for indexable inserts ISO S25R SDUCL Left‑hand cutting orientation FAQ Which inserts are compatible with this boring bar? The K262TM boring bar by Teknik Makina is specified for DC-- 11T3 indexable inserts in an SDUC pocket, allowing use of common insert grades and geometries for internal turning. Is the tool left‑hand or right‑hand? This unit is a left‑hand cutting boring bar; the ISO designation S25R SDUCL indicates the holder geometry and left‑hand orientation. What are the key dimensional features necessary for mounting? Mounting requires a toolholder or turret that accepts a shank of 25 mm and an assembly length compatible with the 200 mm overall length; these dimensions define the mechanical fit in the turret pocket. Can the K262TM deliver stable finishing results? With its 32 mm diameter, 40 mm cutting height and SDUC insert interface, the K262TM offers the rigidity needed for stable finishing passes when paired with suitable insert grades. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of rigid clamping, compatibility with DC-- 11T3 indexable inserts and a 200 mm reach for consistent bore quality; order directly via Metav Werkzeuge or consult our specialists for application advice. Bohrstange S25R SDUCR – SDUC boring bar for DC-- 11T3 indexable inserts, right‑hand The Bohrstange S25R SDUCR is a right‑hand boring bar engineered for machining operations with DC-- 11T3 indexable inserts, providing stable support for finishing and profiling tasks in CNC turning applications. S25R SDUCR holder for DC-- 11T3 inserts 25 mm shank diameter for stable clamping 200 mm overall length for deep reach Greater stability for improved surface finish The rigid 25 mm shank and compact holder geometry increase resistance to vibration, which delivers a more consistent surface finish and reduces rework. A reduced tendency to chatter means longer useful life for both the tool body and the inserts. The ISO designation S25R SDUCR identifies the shank size and the right‑hand cutting orientation, enabling predictable setup in automated tool turrets and reducing fixture adjustments. Lower operating cost through insert compatibility Designed for use with DC-- 11T3 indexable inserts, the holder allows straightforward index changes and fast insert replacement, cutting downtime and tooling costs. Indexable inserts separate cutting edge wear from the tool body: worn edges are replaced instead of replacing the entire tool. This modular approach supports efficient inventory management and simplifies process planning in production environments. Reach and accessibility for challenging bores With a 200 mm overall length and a tool diameter of 32 mm, the bar provides access into extended bore depths while maintaining rigidity. The 40 mm cutting height supports secure insert seating and consistent chip control at the cutting zone. A cutting angle of 93° offers a geometry that balances cutting forces and clearance, enabling reliable performance in profiling and internal turning where space and precision matter. Supply reliability and technical support from Metav The holder is supplied by Teknik Cutting Tools and distributed through Metav Werkzeuge, which combines a broad product range with applied expertise. Metav’s logistics and technical advisers help integrate the tool into existing toolchains and can advise on insert grades, clamping torque and turret compatibility. That combination of product quality and practical guidance supports uninterrupted production and process confidence. For tailored advice on integrating the Teknik Cutting Tools S25R SDUCR boring bar into production, or to request availability from Metav Werkzeuge, please contact Metav’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: K132TM Designation: Boring bar (Bohrstange) ISO designation: S25R SDUCR Compatible inserts: DC-- 11T3 Manufacturer: Teknik Makina Core data Shank diameter: 25 mm Overall length: 200 mm Diameter: 32 mm Cutting height: 40 mm Weight: 0.748 kg Cutting angle: 93° Cutting direction: right Special features SDUC holder type Designed for indexable inserts Right‑hand cutting orientation Stable clamping geometry Suitable for bore finishing and profiling FAQ What inserts fit this holder? The holder accepts DC-- 11T3 indexable inserts; the SDUC design secures the insert for repeatable seat location and simple replacement. Is the shank size suitable for heavy cuts? The 25 mm shank provides good rigidity for finishing and moderate roughing; heavier cuts may require larger diameter tooling. How does the ISO code S25R SDUCR translate to the tool features? S25R indicates the 25 mm shank with a right‑hand orientation; SDUCR specifies the SDUC‑style clamp and indexable insert arrangement used on the holder. Can this bar be used in automated turrets? Yes, the bar’s standard shank and ISO designation allow integration into most CNC turrets that accept 25 mm shank tooling, facilitating automated machining sequences. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of S25R SDXCR compatibility, 32 mm cutting diameter and a shaft Ø 25 mm for reliable rigidity and predictable tool life; order the boring bar directly via Metav Werkzeuge or contact our consultants for matching inserts and clamping options. Bohrstange — Boring bar S25R SDXCR, 32 mm, right-hand, by Teknik Makina The Bohrstange is a right-hand boring bar designed for indexable turning and internal profiling with DC-- 11T3 compatible inserts in CNC and workshop tooling applications. Fits DC-- 11T3 indexable inserts Right-hand cutting orientation Shaft Ø 25 mm for stable clamping 200 mm overall length for extended reach Predictable productivity through proven insert compatibility The S25R SDXCR designation denotes a standardised holder geometry that accepts DC-- 11T3 style indexable inserts, ensuring quick insert changes and consistent seating geometry. This compatibility reduces setup variation, which translates to shorter machine downtime and more stable cycle times in serial production. By choosing a holder matched to a common insert format, procurement and stockkeeping become more efficient while tool-change precision stays high. Rigidity and clamping for vibration-minimised cuts With a shaft Ø 25 mm, the bar offers increased bending resistance compared with slender alternatives, resulting in stable clamping and reduced chatter during heavy cuts. The combination of a robust shaft and a 200 mm overall length balances reach and stiffness, making the tool suitable for internal turning where access is required but tool deflection must be controlled. For applications that demand repeatable diameters and tight tolerances, this mechanical stability supports reliable part quality across batches. Geometry tuned for clean chip flow and tool life A 120° cutting angle on the holder promotes favourable chip evacuation when used with the recommended inserts, reducing the likelihood of chip re-cutting and heat concentration at the cutting edge. The specified cutting height 50 mm and compatible insert seat geometry ensure that insert position is consistent, which helps maintain edge life and surface finish. Explaining the function: the holder secures the insert at the correct rake and clearance, so even operators with limited tooling experience can expect dependable cutting behaviour when feeds and speeds are correctly chosen. Versatility for CNC centres and toolroom set-ups This boring bar is supplied in a standard 32 mm cutting diameter and a 200 mm overall length, making it a practical choice for medium-reach internal operations on lathes and turning centres. The right-hand orientation suits standard turning directions on most machines. As an economical holder for indexable inserts, it integrates into workflows where fast tool changes and predictable tolerances matter — from prototype runs to small-series production. Specification-led selection like this simplifies process planning and reduces the need for bespoke tooling. For a tailored recommendation and to ensure the correct insert and clamp configuration, contact Metav Werkzeuge — our specialists will advise on matching S25R SDXCR holders and DC-- 11T3 inserts for the intended CNC application. Technical data Article number: K473TM Manufacturer: Teknik Makina Product name: Bohrstange Designation (EN): SDXCR for DC-- Indexable Inserts Facts Cutting diameter: 32 mm Shaft diameter: 25 mm Overall length: 200 mm Cutting height: 50 mm Cutting angle: 120° Weight: 0.748 kg Cutting direction: right ECLASS: 21180806 Special features ISO designation: S25R SDXCR Compatible inserts: DC-- 11T3 Right-hand cutting orientation For CNC turning and internal profiling FAQ What type of inserts fit this boring bar? The holder accepts DC-- 11T3 style indexable inserts, secured in the SDXCR seat for standardised positioning. Is the bar suitable for long internal bores on turning centres? With a 200 mm overall length and a shaft Ø 25 mm, the bar is suitable for medium-reach internal bores, offering a balance between reach and rigidity. What does the ISO code S25R SDXCR indicate? The ISO code refers to the holder geometry and mounting form; S25R SDXCR specifies a shaft size and the SDXCR seat for DC-- 11T3 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High radial stability and clear compatibility with VBMT 1604 indexable inserts deliver precise internal turning results; the 25 mm shank and 200 mm overall length provide secure clamping and the reach needed for deep bore operations. Order the S25R SVQBR boring bar through Metav Werkzeuge or contact our consultants for machining guidance. S25R SVQBR Boring Bar — SVQB for VBMT Indexable Inserts, 25 mm shank, right‑hand S25R SVQBR is a right‑hand boring bar designed for internal turning applications using VBMT 1604 indexable inserts, offering a balance of rigidity and reach for workshop and production environments 25 mm shank diameter Compatible with VBMT 1604 inserts Right‑hand cutting orientation 200 mm overall length Consistent precision for internal turning operations The S25R SVQBR delivers repeatable turning accuracy through a compact yet rigid design. The tool’s compatibility with VBMT 1604 indexable inserts reduces setup time and maintains cutting-edge geometry across multiple regrinds, which helps sustain component tolerances. With a defined cutting angle of 107.5°, the geometry supports stable chip flow and predictable tool behaviour, contributing to process reliability and reduced scrap rates. Secure clamping and extended reach reduce setups A 25 mm shank and 200 mm overall length give a favourable ratio between stick‑out and stiffness for many common bore sizes. The bar’s 32 mm diameter and 50 mm cutting height ensure positive insert support and a stable cutting interface; the unit weight of 0.725 kg balances inertia and controllability, simplifying tool handling during changeover. These dimensional choices translate into fewer trial cuts and shorter machine downtime in series production. Compatibility and operational efficiency in machining Designed for right‑hand turning, the tool accepts VBMT 1604 inserts for straightforward insert indexing and replacement, lowering tooling costs per part. The SVQB holder style brings a proven clamping principle that secures insert seats and supports repeatable positioning. For contract shops and in‑house production alike, this combination reduces cycle variability and simplifies tooling logistics while supporting consistent surface finishes and dimensional control. Contact Metav Werkzeuge for application advice or availability of the Teknik Cutting Tools S25R SVQBR boring bar (SKU K218TM) and to discuss suitable inserts and clamping options Technical data Article number: K218TM Type: Boring bar Designation: SVQB for VBMT Indexable Inserts ISO designation: S25R SVQBR Brand: Teknik Makina ECLASS: 21180806 Dimensions & weight Shank diameter: 25 mm Diameter: 32 mm Cutting height: 50 mm Overall length: 200 mm Weight: 0.725 kg Cutting angle: 107.5° Features & compatibility For VBMT 1604 indexable inserts Right‑hand cutting direction Clamping holder designation: 16 SKU: K218TM FAQ Which insert type fits this boring bar? The S25R SVQBR accepts VBMT 1604 indexable inserts; these inserts are commonly used for turning and are compatible with the SVQB holder concept used on this bar (SKU K218TM). Is the cutting direction right or left? This boring bar is manufactured for right‑hand cutting, designed to suit standard right‑hand internal turning setups. What are the key dimensions for setup planning? Shank diameter is 25 mm, overall length 200 mm, diameter 32 mm and cutting height 50 mm, providing the reach and profile for deep bore applications. How does the clamping system affect repeatability? The SVQB holder seating and clamping designation ensure secure insert siting and repeatable positioning, helping to maintain dimensional consistency across tool changes. Is this tool suitable for production environments? The S25R SVQBR is designed with rigidity and straightforward insert replacement in mind, making it suitable for repetitive internal turning tasks in small to medium batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a stable combination of 32 mm diameter, a 25 mm shank and compatibility with VCMT 1604 inserts for accurate, vibration‑reduced turning. The compact 200 mm overall length and 107.5° cutting angle ensure predictable chip flow and consistent surface quality. Order the S25R SVQCL boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar S25R SVQCL — SVQC for VCMT indexable inserts by Teknik Cutting Tools (K322TM) The S25R SVQCL boring bar is a left‑hand turning tool engineered for secure clamping and reliable performance with VCMT 1604 indexable inserts in standard lathe operations. Diameter 32 mm for stable cutting Shank diameter 25 mm for secure clamping Compatible with VCMT 1604 indexable inserts Increased stability for heavy turning operations The solid‑shank design and 32 mm diameter provide enhanced rigidity, reducing chatter and improving surface finish when performing internal and external turning tasks. With a 25 mm shank, the tool fits common clamping systems and maintains concentricity under load, which translates into fewer reworks and longer tool life. For buyers planning production runs, this means more predictable cycle times and a straightforward integration into existing tool holders. Insert compatibility and controlled chip flow Configured specifically for VCMT 1604 indexable inserts, the toolhead geometry with a 107.5° cutting angle and 50 mm cutting height supports consistent chip control and repeatable cutting edge positioning. The rhomboid‑style VCMT insert is widely available and offers economical indexable edges that are quick to replace, reducing downtime. Left‑hand cutting direction suits operations where tool approach and machine orientation require a counter‑clockwise feed, simplifying setup for certain lathe configurations. Practical dimensions that streamline workshop planning With an overall length of 200 mm and a weight of 0.728 kg, the bar is compact enough for tight setups while offering the reach needed for typical boring and light facing tasks. The ISO designation S25R SVQCL identifies the shank and head arrangement for inventory and ordering, and the SKU K322TM helps with procurement and stock management. These clear specifications support efficient tooling logistics and help purchasing managers reduce supplier complexity. Contact Metav Werkzeuge in Emmerich for tailored advice on the Teknik Cutting Tools S25R SVQCL boring bar — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K322TM ISO designation: S25R SVQCL Type: SVQC for VCMT indexable inserts Facts Diameter: 32 mm Shank diameter: 25 mm Cutting height: 50 mm Overall length: 200 mm Weight: 0.728 kg Cutting direction: left Cutting angle: 107.5° Special features For VCMT 1604 indexable inserts Solid shank design SVQC cutting head geometry FAQ Which insert type fits this tool? The S25R SVQCL boring bar accepts VCMT 1604 indexable inserts; this compatibility ensures easy replacement and broad availability of inserts. Is the cutting direction left or right? This version is configured for left‑hand cutting, suitable for operations requiring a counter‑clockwise feed relative to the tool. What are the key dimensions to check for clamping? Check the 25 mm shank diameter and the 200 mm overall length to ensure compatible toolholder and sufficient reach for the intended application. Can this bar be used for finishing passes? Yes — the combination of rigidity and the 107.5° cutting geometry supports controlled cutting that is appropriate for many finishing operations when paired with the correct insert grade. How is the product identified for ordering and stock control? Refer to SKU K322TM and ISO designation S25R SVQCL when ordering or checking inventory to avoid confusion. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, ISO‑coded boring solution that combines SVQC geometry and compatibility with VCMT 1604 indexable inserts for stable internal turning. The combination of a 25 mm shank, 50 mm cutting height and a 200 mm overall length supports consistent set‑up and predictable tool life — order via Metav Werkzeuge or request specialist advice from our consultants. Boring bar S25R SVQCR (K223TM) — SVQC bar for VCMT indexable inserts, 25 mm shank, right‑hand Boring bar S25R SVQCR provides a right‑hand SVQC configuration for internal turning with VCMT 1604 indexable inserts, engineered for repeatable clamping and stable chip control in workshop and small‑batch production environments Right‑hand SVQC geometry for stable cuts Compatible with VCMT 1604 indexable inserts 25 mm shank diameter for standard holders 50 mm cutting height for deeper engagement Precision and predictable cutting performance The SVQC geometry is designed to deliver stable cutting behaviour during internal turning operations. With the ISO S25R SVQCR designation, the tool offers a standardised interface for workshop tool management and straightforward documentation. The 25 mm shank provides rigidity in most standard clamping systems while the 50 mm cutting height increases engagement capacity without compromising stability. These characteristics reduce chatter and lead to more consistent diameters and surface finishes, which supports higher first‑pass yield in serial and repair work. Fast integration and low setup times Compatibility with VCMT 1604 indexable inserts simplifies inventory and changeover: a single insert family covers a wide range of materials and cutting regimes. The bar’s 200 mm overall length and 32 mm body diameter balance accessibility in deep bores with manageable overhang, helping to keep setup iterations to a minimum. Repeatable clamping geometry and the standardised ISO code make tool changes predictable and reduce machining downtime, improving productivity in mixed‑technology workshops and small production lines. Practical value for workshop and production planning For shops focused on reliable results rather than experimental tool trials, this SVQC boring bar delivers measurable benefits: improved process stability, lower scrap rates and simpler tool management. The right‑hand cutting direction and the compatibility with a widely used insert format mean the bar fits established machining strategies and common turnover stocks. Combined with Metav’s supply reliability and quality filter in Emmerich, this tool is suitable for both maintenance teams and production engineers seeking consistent internal turning solutions. For tailored advice on integrating Teknik Makina’s S25R SVQCR into existing toolsets, contact Metav Werkzeuge for a technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will recommend the optimum inserts and holders for the application Technical data Article number: K223TM Brand: Teknik Makina ISO designation: S25R SVQCR Type: SVQC for VCMT indexable inserts Facts Shank diameter: 25 mm Cutting height: 50 mm Overall length: 200 mm Body diameter: 32 mm Cutting angle: 107.5° Weight: 0.728 kg Cutting direction: right Special features Compatible with VCMT 1604 indexable inserts SVQC geometry for stable chip control Clamping holder size: 16 Designed for internal turning applications FAQ What insert type does this boring bar accept? The boring bar accepts VCMT 1604 indexable inserts and is configured for the SVQC insert seat to ensure reliable seating and chip control. Which shank size is this bar supplied with? This bar is supplied with a 25 mm shank (ISO S25R SVQCR) to fit standard boring toolholders and ensure rigidity during internal turning. Is the cutting direction right‑hand or left‑hand? The bar is specified for right‑hand cutting, suitable for conventional internal turning setups requiring right‑hand orientation. What are the main dimensional limits for deep hole work? Key dimensions: overall length 200 mm, body diameter 32 mm and cutting height 50 mm, which together determine usable overhang and maximum stable engagement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com