Gibt es einen Hahn und Kolb Online Shop?

Combining 32 mm diameter, internal coolant and a secure M16 thread, this screw-in cutter delivers stable cutting performance and extended insert life. Order the tool directly via Metav Werkzeuge or consult the advisors for application-specific guidance. Screw-in cutter for XEKT 1904 indexable inserts — 32 mm, internal coolant (Teknik Makina) The screw-in cutter is designed as a compact tool head for roughing and finishing where coolant-through capability and secure clamping are required; suitable for indexable insert applications in general workshop and light industrial milling. 32 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with XEKT 1904 indexable inserts M16 thread connection, 82 mm overall length Consistent cooling and improved tool life The integrated internal coolant channel ensures directed coolant supply directly to the cutting zone, which reduces built-up edge and helps evacuate chips effectively. For operations where thermal control is critical, the cooling path prolongs insert life and maintains a more consistent cutting geometry under load. This targeted coolant delivery also helps in reducing rework and downtime by limiting thermal distortion on the workpiece. The coolant feature is particularly useful when paired with coated inserts that perform better under lower cutting temperatures. Secure mounting and mechanical rigidity for precise cuts A robust M16 screw connection with a 28 mm thread engagement ensures axial stability and repeatable positioning of the cutting head. The tool features two cutting edges with a 55 mm cutting height, which balances material removal rate and surface finish in many milling setups. The combination of a compact 82 mm overall length and the 32 mm head diameter provides reduced overhang compared with longer toolholders, helping to lower vibration and improve concentricity during operation. Mechanical stability translates directly into dimensional accuracy and predictable tool wear. Wide compatibility and workshop efficiency Designed for use with XEKT 1904 indexable inserts and compatible with inserts from Korloy, this head (SKU VT261-1TM) simplifies logistics by supporting widely available inserts. The modest mass of 0.23 kg contributes to lower spindle load and quicker tool changes in automated or manual tool stations. For shops looking to streamline consumables, the standard Torx fastener (T15) and supplied screw specification (M4x8.5) mean replacement parts and maintenance are straightforward. This results in higher uptime and a more economical production flow when combined with regular insert rotation and standard maintenance practices. For procurement or technical matching of the Teknik Makina screw-in cutter VT261-1TM, contact Metav Werkzeuge to arrange delivery from Emmerich or request application advice from the in-house consultants Technical Data SKU: VT261-1TM Label: 32mm screw-in cutter XEKT 1904 L82mm with internal coolant Manufacturer: Teknik Makina Product type: Screw-in cutter Core specifications Diameter: 32 mm Overall length: 82 mm Thread height: 28 mm Cutting height: 55 mm Number of cutting edges: 2 Thread: M16 Weight: 0.23 kg Torx key: T15 Torx screw: M4x8.5 Internal coolant: yes Compatibility & special features Compatible with XEKT 1904 indexable inserts Suitable insert manufacturer: Korloy Eclass: 21180806 UID: VT261-1TM Product label detail: 32mm screw-in cutter XEKT 1904 L82mm with internal coolant FAQ What inserts fit this tool head? The VT261-1TM screw-in cutter is designed for XEKT 1904 indexable inserts and is compatible with inserts from Korloy. What is the connection type and how secure is the clamping? Clamping is via an M16 thread with 28 mm engagement, providing high axial rigidity and repeatable mounting for the screw-in cutter. Is the cutter suitable for coolant-through machining? Yes — the cutter features internal coolant, delivering fluid directly to the cutting zone to improve chip evacuation and insert life. Which fastener is required for insert clamping? Insert retention uses a Torx screw specified as M4x8.5 with a T15 Torx key for installation and replacement. How long is the tool and what is its mass? Overall length is 82 mm and the tool weighs 0.23 kg, offering a compact, lightweight head that reduces spindle load. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust 32 mm cutting diameter combined with a secure M16 screw‑in thread and two cutting edges for dependable chip removal and stable mounting; order the screw‑in milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Screw-in milling cutter for XEKT 1904 indexable inserts, 32 mm, M16 thread — Teknik Makina The screw-in milling cutter for XEKT 1904 indexable inserts is a compact, screw‑mounted tool designed for reliable material removal in CNC milling operations where quick insert changes and firm clamping are essential. 32 mm cutting diameter M16 screw‑in thread Compatible with Korloy XEKT 1904 inserts Torx fastening, M4 x 8.5 mm Consistent clamping for uninterrupted production A screw‑in design with an M16 thread and a thread height of 28 mm delivers a secure mechanical interface between spindle and tool body. This mounting method reduces micro‑movement and ensures repeatable seating of the insert, which translates into consistent part tolerances and reduced rework. Specifying a tool with these mounting dimensions supports stable machining cycles in batch production and reduces downtime caused by retightening or unexpected loosening. Cut‑width and edge geometry optimised for efficiency With a 32 mm diameter and two cutting edges, the tool balances material removal rate with surface finish. The dual‑edge configuration enables efficient chip evacuation while keeping cutting forces manageable, which is particularly useful when machining mixed batches or when machine spindle power is limited. The cutter’s overall length of 82 mm helps position the cutting zone close to the spindle, improving rigidity and minimizing vibration during interrupted cuts. Practical assembly and maintenance for workshop workflows Assembly and insert changes are straightforward: the head is secured by a Torx screw (size M4 x 8.5 mm) tightened with a T15 key, allowing rapid replacement of worn inserts without special fixtures. At 0.23 kg, the tool is light enough for safe manual handling yet robust in construction, easing logistics for tool assemblies and storage. Clear, standardised fastening simplifies maintenance planning and shortens tool changeover time on the shop floor. Compatibility that fits existing tool inventories Designed for the widely used XEKT 1904 indexable inserts from Korloy, the cutter integrates with common insert geometries and grades, reducing the need for bespoke consumables. This compatibility supports inventory consolidation and faster replenishment. The tool’s specifications also make it suitable as a direct replacement in fixtures or holders that accept M16 screw‑in bodies, streamlining retrofits and upgrades. Contact Metav Werkzeuge for tailored advice on procurement and application of the Teknik Cutting Tools screw‑in milling cutter VT261TM; reach out from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 to discuss suitable inserts and delivery options Technical data SKU: VT261TM Model label: 32mm Einschraubfräser XEKT 1904 L82mm Manufacturer: Teknik Cutting Tools / Teknik Makina Diameter: 32 mm Overall length: 82 mm Thread: M16 Thread height: 28 mm Cutting edges: 2 Cutting‑edge height: 55 mm Weight: 0.23 kg Torx key: T15 Torx screw: M4 x 8.5 mm Compatible inserts: XEKT 1904 Compatible insert manufacturer: Korloy eClass: 21180806 Screw‑in mounting M16 Torx fastening system Designed for indexable inserts Compact 82 mm length FAQ Which indexable inserts fit this tool? The screw‑in milling cutter VT261TM accepts XEKT 1904 indexable inserts, typically supplied by Korloy, enabling straightforward replacement with standard insert geometries. What fastening hardware is required for insert changes? Insert retention uses a Torx screw M4 x 8.5 mm, tightened with a T15 key, allowing quick and secure insert replacement on the VT261TM tool head. How does the M16 thread affect machine compatibility? The M16 screw‑in thread and 28 mm thread height provide a standardised mounting interface; compatibility depends on the holder or arbor accepting M16 screw‑in bodies. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact tool that combines a 32 mm cutting diameter, an M16 screw connection and compatibility with XEKT 1904 indexable inserts to increase process stability and reduce tool-change time; order via Metav Werkzeuge or contact our consultants for application support. VT261-2TM screw-in milling cutter by Teknik Makina — 32 mm, M16 thread, for XEKT 1904 indexable inserts The VT261-2TM screw-in milling cutter is a purpose-built 32 mm cutter for industrial finishing and light roughing operations, designed to accept XEKT 1904 indexable inserts and to fit standard M16 screw interfaces. 32 mm cutting diameter for stable engagement M16 screw connection for secure mounting Compatible with XEKT 1904 Korloy inserts Three cutting edges for efficient material removal Improve cycle times with a stable 32 mm cutting diameter The tool body offers a 32 mm cutting diameter that balances cutting capacity and rigidity, enabling consistent chip formation and reduced vibration during milling. With three cutting edges, the cutter distributes cutting forces evenly, which translates into smoother feeds and longer cutter life compared with single‑edge solutions. The result is measurable productivity gains on repetitive machining tasks and a reduced need for rework, supporting predictable production planning. Seamless compatibility with the XEKT 1904 insert system Designed for XEKT 1904 indexable inserts from Korloy, the cutter ensures fast insert changes and reproducible seating geometry. The standardised interface reduces setup time and avoids alignment errors; the included Torx screw specification (M4x8.5) and tool key (T15) mean replacement and clamping are both secure and quick. For users familiar with indexable systems, this configuration delivers immediate process reliability and simplifies inventory management. Secure mounting and concise dimensions for workshop efficiency The cutter features an M16 screw connection and a thread engagement height of 28 mm, combining ease of installation with robust clamping. With an overall length of 82 mm and a cutting-edge height of 55 mm, the geometry is compact enough for tight setups while still offering sufficient reach for many shoulder and face milling operations. The modest weight of 0.242 kg supports easier handling during tool changes and reduces load on toolholders. Durable construction and straightforward maintenance for less downtime Manufactured by Teknik Makina to industrial tolerances, the tool body is built for repeatable use in production environments. The use of indexable inserts concentrates wear on replaceable carbide tips rather than the cutter body, lowering long‑term operating costs. Regular inspection of clamping screws and insert seats ensures consistent cutting performance; the standard Torx interface simplifies maintenance and reduces the likelihood of incorrect torque application. Contact Metav Werkzeuge today to check application fit and order the VT261-2TM or to request technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VT261-2TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Core technical data Cutting diameter: 32 mm Overall length: 82 mm Thread: M16 Thread engagement height: 28 mm Cutting-edge height: 55 mm Number of cutting edges: 3 Weight: 0.242 kg Compatible insert: XEKT 1904 Special features Compatible with Korloy XEKT 1904 indexable inserts Torx screw: M4x8.5 Torx key: T15 Model: VT261-2TM Manufacturer: Teknik Makina FAQ Which inserts fit this cutter? The VT261-2TM accepts XEKT 1904 indexable inserts; compatibility with Korloy-specified inserts ensures correct seating and cutting geometry. What thread connection is required for mounting? This screw-in cutter uses an M16 thread with 28 mm engagement height for secure mounting in compatible toolholders. How many cutting edges does the tool have and what is the benefit? The cutter has three cutting edges, which distribute forces for smoother machining and improved productivity during repetitive operations. Is a special key required to change inserts? Insert clamping uses a Torx screw M4x8.5 and requires a T15 Torx key for secure and repeatable replacement. Which applications suit this cutter best? The tool is suitable for face and shoulder milling where a compact, rigid cutter with quick insert changes is beneficial, particularly in production environments using XEKT 1904 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of internal coolant and a robust M16 screw-in mounting ensures reliable chip evacuation and fast tool changes for uninterrupted production; the 32 mm diameter and three cutting edges deliver stable material removal and consistent surface quality. Order the tool directly via Metav Werkzeuge or consult their specialists for machining recommendations. Screw-in milling cutter for XEKT 1904 indexable inserts — 32 mm, internal coolant (Teknik Makina) The screw-in milling cutter provides a coolant-fed, compact screw-in solution for use with XEKT 1904 indexable inserts, designed for quick head changes and consistent machining performance. Internal coolant for improved chip evacuation 32 mm diameter for stable cutting M16 screw-in mounting for quick replacement Compatible with XEKT 1904 inserts by Korloy Consistent cutting performance through coolant-fed design The tool’s internal coolant channel directs cutting fluid right to the cutting zone, supporting efficient chip evacuation and improved heat control. That coolant-fed design lowers thermal build-up at the insert edge, helping to extend insert life and maintain repeatable surface finish over longer sequences. With a 32 mm diameter and a tri-edged geometry, the milling head offers a balance of rigidity and material removal rate that stabilises spindle loads and reduces vibration during interrupted cuts. Practical mounting and serviceability for shop-floor efficiency A screw-in configuration with M16 thread reduces downtime when replacing heads and simplifies toolholder inventory. The tool features a thread height of 28 mm and an overall length of 82 mm, dimensions that enable compact setups in tight tool magazines without compromising reach. Fastening is secured via a Torx M4x8.5 screw with a T15 Torx key, allowing quick, repeatable clamping and safe torque transfer. The lightweight design (approx. 0.242 kg) supports high-speed tool changes and agile handling in automated tool systems. Broad compatibility with indexable inserts to reduce stock variety Designed specifically for XEKT 1904 indexable inserts, the head accepts inserts from Korloy, enabling use of widely available insert grades and geometries. Using standardised inserts simplifies regrinding and replacement logistics and allows process engineers to select grades that best match cutting strategies. The indexable concept delivers consistent geometry with each insert index, ensuring predictable tool-life cycles and easier process documentation for production control. Reliable tool choice for repetitive milling operations The tri-edge configuration offers a good compromise between material removal and surface integrity; with a cutting-edge height of 55 mm, the head supports stable chip formation and predictable engagement. The screw-in design and internal cooling together reduce the risk of thermal distortion and edge chipping in continuous production runs, which helps maintain throughput and minimise rework. For applications requiring a compact, coolant-fed screw-in solution, this milling head is an efficient option that aligns with modern CNC toolchange workflows. For application advice, specification requests or to arrange supply of the Teknik Makina screw-in milling cutter (SKU VT261-3TM), contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number / SKU: VT261-3TM Product type: Screw-in milling cutter Manufacturer: Teknik Makina Label: 32 mm screw-in milling cutter XEKT 1904 L82 mm with internal coolant Facts Diameter: 32 mm Overall length: 82 mm Thread height: 28 mm Cutting-edge height: 55 mm Cutting edges: 3 Weight: 0.242 kg Thread: M16 Torx screw: M4x8.5 Torx key: T15 Special features Internal coolant For XEKT 1904 indexable inserts Compatible with Korloy inserts Screw-in mounting for quick replacement Torx fastening for secure clamping FAQ How does the internal coolant benefit machining with this tool? The internal coolant channel delivers fluid directly to the cutting edge, reducing heat and improving chip evacuation; the screw-in milling cutter with internal coolant therefore helps prolong insert life and stabilise cutting conditions. Which inserts fit this milling head? The head is designed for XEKT 1904 indexable inserts and is compatible with Korloy inserts, allowing the use of standardised grades and geometries for flexible tooling strategies. What is required to mount and secure the cutter? Mounting uses an M16 screw-in thread; fastening is achieved with an M4x8.5 Torx screw and a T15 Torx key for repeatable, secure clamping of the milling head. Is the tool suitable for automated toolchange systems? Yes, the compact screw-in design, modest overall length and lightweight construction make the milling head well suited to automated toolchange systems and compact tool magazines. What does the three cutting-edge design mean for productivity? Three cutting edges provide a balance between material removal rate and stability, delivering steady cutting forces and predictable insert indexing that supports continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The combination of internal coolant, an M16 threaded connection and a robust Ø 32 mm body provides reliable chip control and secure mounting for high‑productivity milling. Choose this tool for stable indexable‑insert machining and contact Metav Werkzeuge for ordering or technical advice. Screw-in milling cutter VT249-1TM – Ø 32 mm, internal coolant (Teknik Makina) The Screw-in milling cutter VT249-1TM for XNEX 0403 indexable inserts is designed as a compact, coolant‑through solution for secure, repeatable cutter changes in metalworking environments. Ø 32 mm diameter with 5 cutting edges Internal coolant for improved chip evacuation M16 threaded mount, 65 mm overall length Compatible with XNEX 0403 Tungaloy inserts Increased material removal with stable cutter geometry The compact tool body and five cutting edges enable a higher material removal rate while maintaining surface quality. With a 32 mm diameter and a focus on balanced geometry, vibration is reduced and tool life is optimised. The combination of a short 65 mm overall length and a solid connection supports high‑efficiency milling, so cycle times can be shortened without compromising component tolerances. Fast insert changes and secure mounting reduce downtime A standard M16 thread provides a robust interface that simplifies clamping and repeatability; the head is secured with a Torx T8 key and M2.5x6.5 Torx screw, allowing quick insert swaps. The cutter accepts XNEX 0403 indexable inserts from Tungaloy, so insert availability and interchangeability are straightforward. This design minimises machine downtime and ensures precise seating for consistent cutting geometry. Coolant‑through design improves chip evacuation and finish The internal coolant supply is routed to the cutting zone, improving chip control and enabling efficient heat dissipation during aggressive cuts. With a 40 mm cutting height and a lightweight 0.253 kg body, the tool supports steady feed conditions while helping to preserve insert edges. This makes the cutter suitable for serial production tasks where consistent surface finish and repeatability are priorities. For improved milling performance with coolant‑through capability, request availability of the Teknik Makina screw‑in cutter VT249-1TM from Metav Werkzeuge and receive tailored advice and delivery options via Metav Werkzeuge at Parkring 45, Emmerich or email info@metav-werkzeuge.com. Technical data Article number: VT249-1TM SKU: VT249-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Facts Diameter: 32 mm Overall length: 65 mm Thread: M16 Thread height: 25 mm Cutting edges: 5 Cutting height: 40 mm Weight: 0.253 kg Special features Internal coolant (coolant‑through) Compatible with XNEX 0403 indexable inserts Recommended insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x6.5 Label: 32mm screw-in cutter XNEX 0403 L65mm with internal coolant FAQ Which inserts fit this cutter? The cutter accepts XNEX 0403 indexable inserts; compatibility is specified for inserts from Tungaloy and should be confirmed against the insert grade and application. Is coolant-through functionality included? Yes, the tool features internal coolant routing to the cutting zone, which supports chip evacuation and better heat control during machining. What is the mounting thread and how is the head secured? The tool uses an M16 threaded mount and the cutting head is secured with a Torx T8 drive using an M2.5x6.5 Torx screw for insert retention. How many cutting edges does the tool have and what is the benefit? The body utilises five cutting edges, enabling increased material removal and smoother engagement, which helps to improve productivity and surface finish. What are the key dimensions to consider for machine setup? Key dimensions include a Ø 32 mm cutter body, 65 mm overall length and 40 mm cutting height; these should be matched to the machine's toolholder and spindle clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, robust threaded arbor offering Ø 32 mm body diameter and an M16 screw connection combined with three cutting edges and a 90° cutting angle for reliable face and slot milling; order the tool via Metav Werkzeuge or consult our specialists for application advice. Screw-in cutter VT163TM for APKT 1604 indexable inserts – Ø 32 mm, M16 thread (Teknik Makina) The Screw-in cutter VT163TM is a compact threaded arbor designed for secure mounting and efficient use with APKT 1604 indexable inserts in general machining operations. Ø 32 mm body diameter M16 threaded mounting Compatible with APKT 1604 inserts Three cutting edges, 90° cutting angle Rigidity and repeatable accuracy for consistent results The screw-in design with a robust M16 thread and a thread engagement height of 24.5 mm ensures a firm connection to the holder, which translates into improved stability and repeatable tool positioning. With a cutting height of 35.5 mm and a compact overall length of 60 mm, the arbor minimises overhang and helps maintain cutting geometry under load. Such mechanical security reduces vibration and contributes to predictable machining outcomes, making the solution suitable where repeatability and tool life are priorities. Fast insert handling and predictable clamping Using common APKT 1604 indexable inserts keeps consumable logistics straightforward and cost-efficient, especially given compatibility with Korloy inserts. The head is secured with a Torx M4x10 screw; a T15 Torx key is required for insert changes and tightening. The presence of three cutting edges and a 90° cutting angle provides balanced engagement and even wear distribution, which simplifies tool management and lowers the frequency of unscheduled rework. The arbor’s low mass (0.18 kg) also reduces spindle load during tool changes. Straightforward integration and maintenance in production The compact geometry and standardised mounting form make the tool easy to integrate into modular tooling systems and common toolholders. Clear mechanical specifications support process planning: diameter 32 mm, thread M16, three cutting edges and defined cutting height permit predictable set-ups and shortened preparation times. Regular maintenance is limited to insert replacement and screw torque checks with the specified Torx key, keeping downtime to a minimum while preserving machining quality. For delivery options, stock status and technical guidance on integrating the VT163TM screw-in cutter into existing toolholders, contact Metav Werkzeuge directly at +49 2822 7131930 or info@metav-werkzeuge.com to discuss the right configuration for the workshop or production line Technical data Article number: VT163TM Manufacturer: Teknik Makina Description: Screw-in cutter for APKT 1604 indexable inserts Diameter: 32 mm Thread: M16 Thread engagement height: 24.5 mm Cutting height: 35.5 mm Overall length: 60 mm Weight: 0.18 kg Number of cutting edges: 3 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Design: screw-in arbor Application: indexable-insert face and slot milling FAQ Which insert type does this cutter accept? The VT163TM accepts APKT 1604 indexable inserts; the tool is specified for that insert size and form. Is the arbor compatible with Korloy inserts? Yes, compatibility with Korloy APKT 1604 inserts is indicated for the VT163TM screw-in cutter. What fastener and tool are required for insert changes? Insert clamping uses a Torx M4x10 screw; a T15 Torx key is specified for tightening and removal. What are the key dimensions to consider for set-up? Important set-up dimensions are Ø 32 mm body diameter, M16 thread, thread engagement height 24.5 mm, cutting height 35.5 mm and overall length 60 mm. How many cutting edges does the tool have and what is the cutting angle? The arbor carries three cutting edges and features a 90° cutting angle, giving balanced engagement and predictable wear. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a compact screw-in milling cutter that combines a secure M16 threaded connection with compatibility for BLMP 0603 indexable inserts; the 32 mm diameter and two cutting edges deliver steady material removal and reproducible results. Order the screw-in milling cutter VT193TM directly via Metav Werkzeuge or ask our consultants if needed. Screw-in milling cutter VT193TM – Teknik Makina, Ø32 mm, M16 thread The screw-in milling cutter VT193TM is a threaded cutter body designed to accept BLMP 0603 indexable inserts for efficient face and shoulder milling in general machining applications. Screw-in holder with M16 thread Suitable for BLMP 0603 indexable inserts Ø32 mm with two cutting edges 100° cutting angle for versatile milling Secure connection and direct compatibility for reliable toolholding The threaded arbor provides a positive mechanical clamping system that ensures radial stability during milling. The M16 thread and concise overall length reduce tool overhang, while the Ø32 mm body increases rigidity compared with smaller holders. Compatibility with BLMP 0603 inserts means established insert geometries and chipbreakers from recognised manufacturers can be used, simplifying tool procurement and tool-setting routines. The compact mass contributes to lower vibration levels and improved surface finish. Consistent cutting performance with efficient chip removal A 100° cutting angle combined with 2 cutting edges offers predictable cutting forces and a favourable balance between material removal rate and tool life. The holder accepts the common BLMP 0603 format, enabling quick indexable-insert changes and repeatable positioning. Insert clamping relies on a Torx screw M3x6,5 tightened with a T8 key, a proven approach that facilitates secure retention while remaining quick to service during tool changes. The 25 mm cutting height supports deeper engagements where required without compromising stability. Workshop integration, ease of maintenance and proven traceability With an overall length of 65 mm and a low mass of 0.044 kg, the tool is easy to handle and integrates cleanly into standard tool presetting and storage systems. Thread and head dimensions allow straightforward replacement in modular toolholders or quick-change systems, reducing downtime. The design accepts Taegutec-compatible inserts, widening sourcing options and supporting consistent stock management. Where process repeatability matters, this screw-in format delivers a robust foundation for series production and single-part milling alike. For compatibility checks, technical queries or to secure Teknik Makina’s VT193TM screw-in milling cutter for BLMP 0603 inserts, contact Metav Werkzeuge for tailored advice and reliable supply. Technical data Article number: VT193TM Manufacturer: Teknik Makina Product: Screw-in milling cutter for BLMP 0603 indexable inserts Specifications Diameter: 32 mm Overall length: 65 mm Cutting height: 25 mm Thread height: 25 mm Weight: 0.044 kg Number of cutters: 2 Cutting angle: 100° Thread: M16 Torx screw: M3x6,5 Torx key: T8 Features For BLMP 0603 indexable inserts Compatible with Taegutec inserts Screw-in design for secure clamping Two cutting edges for balanced machining FAQ Which indexable inserts fit this screw-in milling cutter? The VT193TM is designed for BLMP 0603 indexable inserts; compatible inserts from Taegutec and equivalent manufacturers can be used. What is the thread specification of the holder? The cutter body features an M16 thread for secure screw-in mounting. How are the inserts secured? Inserts are fastened with a M3x6,5 Torx screw tightened using a T8 key, ensuring reliable clamping of the BLMP 0603 insert. What are the key dimensions to consider when fitting into a toolholder? Relevant dimensions include Ø32 mm diameter and 65 mm overall length; cutting height is 25 mm, which helps determine clearance and reach. Is this tool suitable for heavy overhangs? The compact design and modest overall length reduce overhang and improve rigidity, but specific suitability depends on the application and machine setup. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from the combination of secure clamping and coolant-assisted machining provided by the 32 mm screw-in milling cutter with an M16 connection and internal coolant; this reduces tool change frequency and improves chip control. Order the cutter via Metav Werkzeuge or contact our consultants for application-specific advice. Screw-in milling cutter VT305-1TM by Teknik Makina — 32 mm, internal coolant The screw-in milling cutter for LNMU 0303 indexable inserts offers coolant-fed performance and a compact screw-in design for industrial milling tasks. 32 mm diameter for robust material removal Internal coolant for improved chip evacuation M16 screw-in connection for secure clamping Compatible with LNMU 0303 indexable inserts Maximum material removal with reproducible accuracy The design combines a compact 32 mm diameter with five cutting edges to deliver high material removal rates while maintaining stable cutting conditions. The M16 thread and 23 mm thread engagement ensure a rigid connection to the holder, reducing vibration and improving surface finish. With an overall length of 63 mm and a cutting-edge height of 40 mm, the tool is suited to operations requiring both reach and stability. The result is predictable cycle times and fewer interrupted runs, which supports production planning and machine utilisation. Faster index changes and reduced downtime Tool maintenance and insert replacement are simplified by the secure clamping system and standard fasteners. The cutter uses a Torx T8 interface and M2.5x7 Torx screws for insert fixation, enabling quick, repeatable insert swaps with common workshop tools. The relatively low mass of 0.227 kg contributes to reduced inertia during tool changes and benefits automated tool changers where applicable. Compatibility with widely used indexable inserts streamlines stocking and reduces the variety of spare parts required in the tooling cabinet. Coolant-fed stability for reliable machining results Internal coolant delivery improves chip evacuation from the cutting zone and supports edge life under continuous loads. The integrated coolant path helps maintain consistent cutting temperatures, which in turn preserves insert geometry and reduces premature wear. Compatibility with LNMU 0303 indexable inserts, including those from Tungaloy, provides flexibility in selecting grades and geometries for specific materials and cutting conditions. For procurement and application assurance, Metav Werkzeuge supplies the component with industry-grade logistics and advisory services to help match the cutter to the machining task. For application support or to place an order for the Teknik Makina screw-in milling cutter VT305-1TM, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply. Technical data SKU: VT305-1TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Designation: for LNMU 0303 Indexable Inserts Core technical data Diameter: 32 mm Overall length: 63 mm Thread engagement height: 23 mm Cutting-edge height: 40 mm Number of cutting edges: 5 Weight: 0.227 kg Thread: M16 Special features Internal coolant Compatible inserts: LNMU 0303 Compatible insert manufacturer: Tungaloy Torx screw: M2.5x7 Torx key: T8 FAQ Which indexable inserts fit this cutter? The cutter accepts LNMU 0303 indexable inserts; compatibility with Tungaloy grades is indicated for VT305-1TM. Is the cutter coolant-fed? Yes, internal coolant is integrated to improve chip evacuation and edge life in the VT305-1TM screw-in milling cutter. What is the clamping connection type? The tool uses an M16 screw-in connection with 23 mm thread engagement for stable clamping. How many cutting edges are supplied? The toolholder is designed for five cutting edges to increase material removal rates per revolution. Which tools are required for insert changes? Insert fixation uses Torx fasteners (Torx T8 key, Torx screw M2.5x7) for dependable, repeatable replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of fast tool change, stable screw‑in mounting and compatibility with RDMT 1003 indexable inserts for consistent external milling results; order the component via Metav Werkzeuge or consult our technical team for integration advice. Screw-in milling cutter VT103TM – Ø 32 mm, M16 thread, 3‑edge design by Teknik Makina The Screw-in milling cutter VT103TM is a compact screw‑in milling head intended for external profiling and finishing operations using RDMT 1003 indexable inserts, engineered for reliable repeatability in production toolholders. For RDMT 1003 indexable inserts Ø 32 mm with M16 thread Three cutting edges for fine surface quality Compact 60 mm length and 0.188 kg mass Precise external milling with changeable inserts The VT103TM is developed for repeatable external machining where consistent results and low downtime are priorities. With a screw‑in design and compatibility with RDMT 1003 indexable inserts, the head provides a cost‑efficient approach to finishing and profiling without full tool‑replacement. The three cutting edges geometry supports stable chipload distribution and helps maintain surface integrity during peripheral passes. Technical variables such as cutting height (35.5 mm) and mounting thread height (24.5 mm) have been balanced to ensure secure clamping and controlled overhang for common turning and milling set‑ups. Reduced inertia and quick, secure clamping for throughput Tool change efficiency and dynamic behaviour have been considered: the compact 60 mm overall length and low mass (0.188 kg) reduce rotational inertia, aiding acceleration and deceleration in automated cycles. Fast clamping and secure locking are enabled by the Torx clamping screw (M3.5×8.5) and dedicated T15 key, together with the locking screw (M3.5) that fixes the insert carrier reliably. These features contribute directly to shorter cycle times, less unproductive time during insert swaps and more consistent process capability on the shop floor. Practical integration and maintenance benefits in production The head suits installations that accept an M16 thread toolholder interface and where indexable insert systems are preferred to minimise regrinds and simplify maintenance. Replaceable inserts mean expenditure is concentrated on wear parts only, while the main body remains in service. The Torx fastening geometry ensures repeatable seat torque and simplifies periodic maintenance using common workshop tools. This approach supports a pragmatic balance between production uptime and predictable tooling costs in both small workshops and larger cell environments. Speak with Metav Werkzeuge for technical compatibility checks and to procure the Teknik Cutting Tools screw‑in milling cutter VT103TM from our Emmerich stock — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: VT103TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 32 mm Thread: M16 Number of cutting edges: 3 Overall length: 60 mm Cutting height: 35.5 mm Thread height: 24.5 mm Weight: 0.188 kg Torx screw: M3.5×8.5 Locking screw: M3.5 Torx key size: T15 Special features For RDMT 1003 indexable inserts Screw‑in mounting Replaceable indexable inserts Torx clamping screw system Compact, low‑mass design FAQ What inserts does this milling head accept? The milling head is designed for RDMT 1003 indexable inserts; the VT103TM accepts these standard inserts for external profiling and finishing. Which toolholder interface is required for mounting? A toolholder or adapter with an M16 thread is required to mount the VT103TM securely in the machine spindle or turret. How is the insert clamped and serviced? Insert clamping uses a Torx screw (M3.5×8.5) tightened with a T15 key; the locking screw (M3.5) secures the insert carrier for repeatable seating and straightforward maintenance. Is the head suitable for automated tool change applications? Yes, the VT103TM’s compact 60 mm overall length and low mass (0.188 kg) reduce inertia and help maintain cycle speed, making it appropriate for automated and CNC environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a secure M16 thread and compatibility with RDMT 12T3 indexable inserts to reduce setup time and ensure consistent machining. Benefit from three cutting edges and a compact overall length for stable, efficient milling cycles. Order directly via Metav Werkzeuge or contact the consultants for application advice. Screw-in milling cutter VT123TM by Teknik Makina — Ø32 mm, M16 thread The Screw-in milling cutter VT123TM is a compact screw-in cutter body engineered for use with RDMT 12T3 indexable inserts, providing a reliable solution for general milling tasks in CNC machining and toolroom operations. For RDMT 12T3 indexable inserts Ø32 mm solid cutter body M16 screw-in thread for secure mounting Three cutting edges for smooth chip flow Cutting height 35.5 mm, overall length 60 mm Consistent clamping for repeatable machining results The screw-in design with a robust M16 thread ensures a rigid tool mounting that minimises runout and vibration. This repeatability reduces dimensional scatter across batch runs and helps maintain surface quality when switching tools or inserts. The 32 mm diameter of the tool body stabilises the cutting zone, enabling predictable tool life and fewer secondary operations. Reliable insert system for controlled chip removal Designed for RDMT 12T3 indexable inserts, the cutter body supports three cutting edges, which balance material removal rate and surface finish. The insert geometry combined with a cutting height of 35.5 mm allows secure seating and consistent cutting engagement; this makes the holder suitable for finishing and semi-finishing passes where consistent chip control and tool rotation stability are essential. Fast, maintenance-friendly fastening to keep downtime low The cutting head is secured using an M3.5 locking screw and a Torx M3.5x8.5 fastener that accepts a T15 key, allowing quick insert changes and straightforward re-tightening on the shop floor. The simple fastening arrangement reduces service time per tool change and supports predictable maintenance intervals, contributing directly to higher machine uptime and lower total machining costs. Compact, lightweight design for flexible machine integration With an overall length of 60 mm and a weight of 0.177 kg, the cutter body is compact enough for tight-tooling envelopes and compatible with automatic tool changers on modern CNC centres. The reduced mass shortens acceleration periods and lessens centrifugal load on the spindle, which can be advantageous in high-speed applications and when tool clearance is limited. Specification-focused benefits for production flow A combination of secure thread mounting, standardised insert compatibility and straightforward fastening delivers measurable benefits: fewer setup adjustments, standardised spare parts inventory and reproducible cutting conditions. These technical advantages translate into practical productivity gains and easier process planning for workshop managers and production engineers. Discuss specific machining requirements with Metav Werkzeuge to confirm suitability of the Teknik Cutting Tools screw-in milling cutter VT123TM and arrange rapid supply from Emmerich. Technical data Article number: VT123TM Brand: Teknik Makina Description: Screw-in milling cutter for RDMT 12T3 indexable inserts eClass: 21180806 ETIM: EC011860 Facts Diameter: 32 mm Thread: M16 Number of cutting edges: 3 Cutting height: 35.5 mm Thread height: 24.5 mm Overall length: 60 mm Weight: 0.177 kg Torx screw: M3.5x8.5 Locking screw: M3.5 Torx key size: T15 Special features Compatible with RDMT 12T3 indexable inserts Screw-in design for secure mounting Three cutting edges for balanced cutting forces Fastening via Torx M3.5x8.5 and T15 key FAQ Which insert type fits this cutter? The cutter is designed for RDMT 12T3 indexable inserts; the VT123TM supports standard seating for that insert geometry ensuring correct chip evacuation and repeatable clamping. How is the cutter secured in the spindle or arbor? The VT123TM uses an M16 thread for screw-in mounting; the tool body is then fixed by an M3.5 locking screw and a Torx M3.5x8.5 fastener (T15). How many cutting edges does the cutter provide and why does that matter? The body accommodates three cutting edges, which offers a compromise between chip load distribution and surface finish — suitable for both semi-finishing and finishing operations where steady cutting forces are required. Is the Torx key included for insert changes? Insert retention is via a Torx M3.5x8.5 screw (T15). Tooling accessories are usually supplied separately; please check the order details for included items when purchasing the VT123TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

The compact 32 mm screw-in milling cutter delivers stable, coolant-fed machining with an M16 screw connection and three cutting edges; combine precise chip control and secure mounting for consistent cycle times — order directly from Metav Werkzeuge or consult our specialists for application advice. Screw-in milling cutter VT123-1TM — 32 mm with internal coolant (Teknik Makina) The screw-in milling cutter VT123-1TM is a compact, coolant-fed milling head engineered for face and peripheral milling applications using RDMT 12T3 indexable inserts, offering a slim design for restricted tool access. 32 mm diameter for compact milling heads Internal coolant for reliable chip evacuation M16 screw-in thread for secure attachment Compatible with RDMT 12T3 indexable inserts Precision where space is limited The compact 32 mm body provides a close-working solution for fixtures and tight bores while maintaining consistent cutting geometry. The reduced overhang lowers vibration, which helps to protect insert life and improve surface finish. Specified dimensions and clearances make this milling head suitable for machines where tool accessibility is at a premium, delivering repeatable performance in short-cycle and multi-station workflows. Secure mounting and optimised coolant flow A robust M16 thread ensures positive clamping and precise concentricity at high spindle speeds, while the internal coolant channel feeds lubricant and wash-through directly to the cutting zone. This arrangement reduces thermal load at the insert, supports reliable chip evacuation and can extend tool life, leading to fewer interruptions for insert changes and improved process stability in production environments. Designed for indexable insert efficiency The tool accepts RDMT 12T3 indexable inserts and uses three cutting edges to distribute cutting forces evenly. Assembly and maintenance are straightforward thanks to the supplied Torx fastening system (Torx T15 with M3.5x8.5 screw), enabling quick insert changes and minimal set-up time. The cutter’s geometry is optimised for common face-milling requirements, balancing metal removal rate and insert longevity for predictable productivity. Workshop readiness and serviceability With an overall length of 60 mm and a net weight of 0.177 kg, this milling head is lightweight yet sufficiently rigid for many standard milling setups. The compact design simplifies storage and handling while the standardised screw-in interface helps reduce tool inventory complexity. For traceability and ordering, refer to the designation VT123-1TM, which identifies the TekniK Makina variant tailored for RDMT 12T3 inserts. Discuss production requirements with Metav Werkzeuge and specify the Teknik Makina 32 mm screw-in milling cutter VT123-1TM to optimise cycle times and coolant management — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VT123-1TM Product type: Screw-in milling cutter Manufacturer: Teknik Makina Specifications Diameter: 32 mm Overall length: 60 mm Thread height: 24.5 mm Thread: M16 Weight: 0.177 kg Cutting edges: 3 Cutting-edge height: 35.5 mm Torx screw: M3.5x8.5 Torx key: T15 Features & compatibility Internal coolant Compatible with RDMT 12T3 indexable inserts M16 screw-in connection Three cutting edges for balanced cutting Compact design for restricted access FAQ Is the cutter compatible with other insert geometries? This cutter is designed specifically for RDMT 12T3 indexable inserts; alternative insert types with different seat forms are not supported without adapter solutions. Does the tool provide through-tool coolant? Yes, the VT123-1TM features internal coolant that supplies lubricant directly to the cutting zone to improve chip evacuation and thermal control. What fastening hardware is required for insert mounting? Insert clamping uses a Torx screw (M3.5x8.5) requiring a Torx T15 key for secure and repeatable assembly. Which machine spindle interface is required? The tool uses an M16 screw-in thread for mounting; ensure the machine holder accepts an M16 screw-in milling head. How many cutting edges are available and what is their arrangement? The cutter uses three cutting edges arranged to balance cutting forces and provide steady material removal during face or peripheral milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of robust compatibility with RPMT inserts, precise screw-in mounting and a compact, lightweight design to streamline milling setups and reduce changeover time; order directly via Metav Werkzeuge or consult our specialists for application support. Screw-in Cutter VT176TM — 32 mm, M16 thread for RPMT 10–12 indexable inserts by Teknik Makina A Screw-in Cutter VT176TM engineered for efficient indexable-insert milling operations where quick insert replacement and secure screw-in mounting are required 32 mm diameter, M16 screw-in thread Accepts RPMT 10–12 indexable inserts Three cutting edges for balanced cutting Lightweight 0.164 kg for easy handling High compatibility and predictable performance for CNC milling The VT176TM delivers a predictable cutting cycle thanks to its threaded M16 mounting and compatibility with RPMT 10–12 inserts. The screw-in design reduces runout and secures the head in the machine spindle, which helps to maintain a consistent cutting height of 34.7 mm. For production planners this means repeatable tool offsets and simplified tool life calculations; the interface with Mitsubishi RPMT inserts ensures widely available geometries and grades for different workpiece materials. Compact design that improves handling and reduces set-up time A compact overall length of 60 mm and a nominal diameter of 32 mm combine with a weight of 0.164 kg to make the cutter easy to manipulate during tool changes and less demanding on toolholding systems. The three cutting edges are arranged to provide a balanced cut, which moderates vibration and supports improved surface finish without requiring complex toolholders. The included fastening elements — M3.5 locking screw, M3.5x8.5 Torx screw and T15 Torx key — are industry-standard sizes that simplify maintenance and reduce the need for special spares. Clear technical fitment that aids purchase decisions The screw-in head is supplied with a thread height of 25.3 mm and a defined cutting height of 34.7 mm, enabling quick verification against existing tool holders and machine clearances. The three-flute layout is suited to light-to-medium material removal rates where insert indexing and repeatability are priorities. Where tool change frequency or tool inventory is a concern, the VT176TM’s compatibility with common RPMT insert formats reduces SKUs and supports leaner stock management. Practical handling and workshop integration Assembly and replacement follow straightforward mechanical steps: the cutter is torqued into the mating thread and inserts are secured with the supplied Torx screw. The compact mass and reliable fixing help to limit centrifugal imbalance at operational speeds. For workshops integrating this head into existing tool sets, the familiar screw sizes and insert family facilitate rapid training of machinists and reduce the onboarding time for new operations. For tailored procurement advice or to secure the Teknik Makina VT176TM for production use, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for delivery and technical consultation. Technical data SKU: VT176TM Brand: Teknik Makina Type: Screw-in cutter for RPMT 10–12 indexable inserts Compatible inserts: RPMT 12 (Mitsubishi) Facts Diameter: 32 mm Thread: M16 Overall length: 60 mm Thread height: 25.3 mm Cutting height: 34.7 mm Cutting edges: 3 Weight: 0.164 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Special features For RPMT 10–12 indexable inserts Compatible with Mitsubishi inserts Screw-in mounting for reduced runout Three cutting edges for balanced machining Compact and lightweight construction FAQ Is the cutter compatible with standard RPMT inserts? The VT176TM accepts RPMT 10–12 indexable inserts and is specified for RPMT 12 format; compatibility with Mitsubishi RPMT geometries is confirmed in the product data. What is the mounting thread and how deep is it? The cutter uses an M16 screw-in thread with a thread height of 25.3 mm, designed for secure screw-in mounting in compatible toolholders. Which fastening hardware is supplied or required? Assembly requires an M3.5 locking screw, an M3.5x8.5 Torx screw and a T15 Torx key for insert clamping and locking. How many cutting edges does the head have and what is the benefit? The head features three cutting edges, providing a balanced cut that helps to reduce vibration and improve surface finish during light-to-medium milling. Is the VT176TM suitable for high-speed machining? The tool is optimised for reliable insert seating and balanced cutting; suitability for high-speed applications depends on the selected insert grade and machine capability — verify insert recommendations for the intended cutting speed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the combination of compact design, reliable coolant supply and robust M16 screw mounting to maintain steady chip control and long insert life. Request the VT296TM directly via Metav Werkzeuge or consult the technical team for optimum insert and feed recommendations. Screw-in milling cutter for RPMT 1204 indexable inserts — 32 mm, internal coolant (Teknik Makina) A screw-in milling cutter for RPMT 1204 indexable inserts, designed as a compact face milling head with an M16 connection and 65 mm overall length for versatile light to medium milling tasks. 32 mm diameter for compact milling heads Internal coolant for improved chip evacuation M16 screw connection for secure mounting Compatible with RPMT 1204 Korloy inserts Compact head design that improves stability and cycle time The compact 32 mm diameter head is engineered to reduce overhang and improve rigidity during face and slot milling. With a 65 mm overall length and a secure M16 screw connection, the assembly is stable when mounted, which helps to lower vibration and extend insert life. The three cutting edges are arranged to deliver consistent material removal and predictable forces, making the tool suitable for series production where repeatability is required. The design reduces the need for frequent rework and supports efficient setup times. Coolant-through routing for cleaner cuts and longer insert life The integrated internal coolant channel directs cutting fluid close to the cutting zone to support chip breaking and temperature control. This targeted cooling reduces edge wear and can improve surface finish on the machined workpiece. Compatibility with RPMT 1204 indexable inserts — commonly available from Korloy — means insert changes are fast and cost-effective, lowering overall tooling expenditure. Because the coolant is delivered internally, coolant pressure is used more efficiently, which benefits cycle stability and repeatable quality. Practical operation, maintenance and tool change advantages The head carries three cutting edges with a 40 mm cutting height, simplifying regrinding and index changes compared with solid-tool alternatives. Insert replacement is a quick process, minimising downtime; the screw-in format allows straightforward mounting and dismounting when paired with standard holders. The compact form factor and coolant capability make this cutter a versatile choice for workshops seeking an economical indexable solution that balances performance with serviceability. For detailed spindle speeds and cutting parameters, a short consultation with the technical team is recommended to match machine capability and material requirements. Contact Metav Werkzeuge for tailored cutting data and to confirm holder compatibility for the VT296TM screw-in cutter from Teknik Makina. Technical data Article number: VT296TM Manufacturer: Teknik Makina Facts Diameter: 32 mm Overall length: 65 mm Thread: M16 Thread height: 250 mm Number of cutting edges: 3 Cutting height: 40 mm Special features Internal coolant For RPMT 1204 indexable inserts Compatible with Korloy inserts Product type: screw-in milling cutter SKU: VT296TM FAQ What insert type fits this cutter? The cutter uses RPMT 1204 indexable inserts; compatibility with Korloy inserts is specified for straightforward sourcing and exchange. What mounting connection does the head require? The tool features an M16 screw connection for secure mounting to compatible holders and tool adapters. Is coolant supported through the tool? Yes, the cutter provides internal coolant routing to the cutting edge to aid chip control and temperature management. How many cutting edges does the cutter have? The head is equipped with three cutting edges, facilitating efficient material removal and straightforward index changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

High-precision 32 mm screw-in milling cutter with internal coolant, M16 thread and SDMT 09T3 compatibility for reduced tool change time and consistent surface quality; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. 32 mm screw-in milling cutter VT240-1TM — internal coolant, M16 thread (Teknik Makina) 32 mm screw-in milling cutter VT240-1TM is a compact milling head designed for machining operations using SDMT 09T3 indexable inserts, offering internal coolant delivery and a robust M16 screw-in connection for stable cutting. 32 mm diameter for stable cutting Internal coolant for improved chip evacuation Threaded M16 screw-in connection Compatible with SDMT 09T3 indexable inserts Consistent cooling and efficient chip control for longer insert life The internally channelled coolant system delivers cutting fluid directly to the cutting edge, improving heat control and chip evacuation. By focusing coolant at the insert interface, the tool reduces thermal stress on the insert and workpiece alike, which helps to extend tool life and maintain surface finish over longer cycles. This targeted cooling is particularly advantageous where interrupted cuts or heavier cutting depths would otherwise accelerate wear. Secure mounting and mechanical rigidity for repeatable performance A threaded M16 screw-in connection with a 29 mm thread height provides a compact, rigid interface that reduces runout and vibration. The solid mechanical coupling ensures repeatable positioning of the indexable head, which supports predictable toolpaths and consistent tolerances. Combined with the 32 mm diameter and an overall length of 69 mm, the design balances accessibility in confined setups with the stiffness required for reliable milling. Practical handling and maintenance to minimise downtime Equipped for three cutting edges with a 40 mm cutting-edge height and supplied with Torx hardware (Torx key T15; screw M3.5x8.5), the assembly and insert changes are straightforward and fast. Compatibility with SDMT 09T3 indexable inserts from ZCC simplifies stockkeeping and replacement: a standardised insert system reduces inventory complexity and shortens maintenance intervals, contributing to higher machine availability and lower operational costs. Request a technical consultation from Metav Werkzeuge to specify the Teknik Makina VT240-1TM screw-in milling cutter with internal coolant — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VT240-1TM Product type: Screw-in milling cutter Manufacturer: Teknik Makina Compatible inserts: SDMT 09T3 (ZCC) Internal coolant: yes Thread: M16 Torx key: T15 Torx screw: M3.5x8.5 Core specifications Diameter: 32 mm Overall length: 69 mm Weight: 0.211 kg Thread height: 29 mm Cutting-edge height: 40 mm Number of cutting edges: 3 Special features Internal coolant Threaded screw-in connection M16 Compatible with SDMT 09T3 indexable inserts Torx T15 fastening Suitable for ZCC SDMT 09T3 inserts FAQ Is the cutter compatible with inserts from other manufacturers? The VT240-1TM screw-in milling cutter by Teknik Makina is specified for SDMT 09T3 indexable inserts; inserts from other manufacturers that conform to the SDMT 09T3 geometry (for example ZCC alternatives) will fit the tool head. Does the tool have internal coolant and what benefit does it bring? Yes — internal coolant channels are integrated into the VT240-1TM, delivering cooling directly to the cutting edge to improve chip removal, reduce thermal load and extend insert life. What is the mounting thread and how deep is it? Mounting is by an M16 screw-in connection with a thread height of 29 mm, providing a compact, rigid interface for repeatable positioning. Which fastening hardware is required for insert clamping? The head uses a Torx fastening system: Torx key T15 and screw M3.5x8.5 are specified for insert clamping and replacement. For which applications is this milling head intended? Designed for general milling tasks where SDMT 09T3 indexable inserts are used, the VT240-1TM is suitable for routine face, shoulder and profile milling operations that benefit from internal coolant and a rigid screw-in connection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from secure M16 clamping, compatibility with XNEX 0403 indexable inserts and five cutting edges for efficient material removal—ensuring consistent cycle times and simple insert changes; order directly via Metav Werkzeuge or consult our specialists for process integration. Screw-in milling cutter VT249TM — 32 mm diameter, M16 thread by Teknik Makina The screw-in milling cutter provides a compact, robust mounting solution for indexable inserts and is designed for versatile face and shoulder milling applications with reliable repeatability 32 mm diameter for stable cutting M16 threaded shank for secure clamping Compatible with XNEX 0403 indexable inserts Five cutting edges for efficient material removal Improved rigidity and predictable performance on the shop floor The compact design delivers rigidity where it matters: a 32 mm diameter body and an M16 thread create a stable connection that reduces vibration and improves tool life. This stability translates into repeatable machining results and fewer reworks. By combining a short, stiff toolholder with a 65 mm total length and a modest weight of 0.253 kg, the assembly keeps spindle loads predictable, which helps to maintain constant surface finish and dimensional accuracy across batches. Flexible insert system that simplifies tool management Compatibility with XNEX 0403 indexable inserts and recognised manufacturers such as SECO allows rapid adaptation between finishing and roughing operations. The cutter accepts the insert geometry designed for radial and axial engagement, enabling quick insert indexing without special adapters. The five cutting edges maximise the number of effective edges per indexable plate, reducing tooling costs per component and lowering machine downtime during insert changes. The included Torx fastener specification (M2.5x5.5, key T7) standardises clamping and simplifies inventory. Practical handling that speeds set-up and maintenance A defined thread height of 25 mm and cutting height of 40 mm mean the tool seats securely with consistent overhang, aiding process planners in calculating stable cutting parameters. The simple screw-in interface shortens tool changes and reduces the need for complex balancing procedures. Maintenance routines are straightforward: visual check of insert seats, torque of the Torx M2.5x5.5 screw and replacement of worn inserts restore original cutting performance quickly. These features support efficient shop workflows and reduce non-productive time. For tailored advice on integrating the VT249TM into existing tool systems or to order through Metav Werkzeuge, contact our Emmerich-based team at +49 2822 7131930 or info@metav-werkzeuge.com for fast, expert support and reliable supply from our European stock. Technical data SKU: VT249TM Manufacturer: Teknik Makina Product type: Screw-in milling cutter Facts Diameter: 32 mm Thread: M16 Cutting edges: 5 Total length: 65 mm Cutting height: 40 mm Thread height: 25 mm Weight: 0.253 kg Special features Compatible inserts: XNEX 0403 Compatible with SECO inserts Torx screw: M2.5x5.5 Torx key size: T7 FAQ What insert type does this cutter accept? The screw-in milling cutter VT249TM accepts XNEX 0403 indexable inserts; the system is compatible with inserts from manufacturers such as SECO and uses the standard pocket geometry for reliable seating. Which shank and thread are used for mounting? Mounting is via an M16 threaded shank; the defined thread height of 25 mm ensures secure clamping and consistent positioning in the toolholder. How many cutting edges are available per cutter? The VT249TM is specified with five cutting edges, which increases the effective number of index positions and reduces tooling cost per produced part. What are the relevant dimensions for process planning? Key dimensions are 32 mm diameter, 65 mm total length and 40 mm cutting height; these values help determine overhang, rigidity and suitable spindle settings. Which fastener and key are required for insert clamping? Insert clamping uses a Torx M2.5x5.5 screw tightened with a T7 key for secure and repeatable fixing of the inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, high‑performance screw‑in milling cutter engineered for efficient face milling: its 32 mm diameter and four cutting edges deliver consistent metal removal while the screw‑in design accepts BLMP 0904 indexable inserts for fast tool changes. Order this tool via Metav Werkzeuge or consult our specialists for integration advice. Screw‑in milling cutter for BLMP 0904 indexable inserts by Teknik Makina — 32 mm, L65 mm Screw‑in milling cutter for light to medium face milling applications in CNC and conventional machining, designed for use with BLMP 0904 indexable inserts. Screw‑in cutter for BLMP 0904 indexable inserts 32 mm diameter for compact milling operations Four cutting edges for high material removal rates Compatible with Taegutec inserts and T10 Torx screw Consistent milling output with compact cutter geometry The 32 mm tool body combines a short overall length with a rigid construction to keep runout and vibration low during milling. With four cutting edges, the cutter spreads cutting forces evenly across the tool, which reduces tool‑holder stress and improves surface finish. The screw‑in mounting provides a secure connection to the spindle or arbor and supports steady chip evacuation. These characteristics make the tool suitable for series work where reproducible quality and short cycle times are priorities. Rapid insert changes and secure clamping reduce downtime Designed for BLMP 0904 indexable inserts, the cutter accepts widely available insert grades and geometries from Taegutec, enabling quick adaptation to different materials or surface requirements. The insert is secured with a Torx screw (key T10, screw M3.5x8.5), which ensures a compact and reliable clamping method; this simplifies maintenance and minimises changeover time. The result is higher net machining time and lower process variability in batch production. Engineered for versatile mounting and predictable handling With an overall length of 65 mm and a mounting thread height of 25 mm, the tool balances accessibility and rigidity for use on smaller mills and multi‑axis machines alike. The moderate mass (approx. 0.248 kg) makes handling easier in tool preparation while still providing enough inertia to stabilise cutting forces. The screw‑in concept allows straightforward replacement of worn cutter bodies without altering insert stock, which streamlines inventory and reduces capital tied up in tooling. Contact Metav Werkzeuge for tailored advice on Teknik Makina screw‑in milling cutters and to discuss application compatibility for the VT266TM SKU Technical data SKU: VT266TM Product type: Screw‑in milling cutter Label: 32mm Einschraubfräser BLMP 0904 L65mm Brand: Teknik Makina Compatible indexable inserts: BLMP 0904 (Taegutec) Facts Diameter: 32 mm Overall length: 65 mm Thread height: 25 mm Thread size: 16 Cutting edges: 4 Cutting edge height: 40 mm Weight: 0.248 kg Torx key: T10 Torx screw: M3.5x8.5 ECLASS: 21180806 Special features Screw‑in mounting for secure fit Compatible with Taegutec inserts Indexable inserts for fast replacement Compact design for small‑machine use Suitable for face milling and light shoulder milling FAQ What insert type does the cutter use? The cutter accepts BLMP 0904 indexable inserts; the body is configured for the standard BLMP 0904 pocket for reliable seating. Is the tool compatible with Taegutec inserts? Yes, the tool is specified as compatible with Taegutec inserts and supports standard geometries for that insert family. Which screw and key are required to secure the insert? The insert is clamped with a Torx screw M3.5x8.5, tightened using a T10 Torx key. What is the SKU for ordering and reference? The product is listed under SKU VT266TM for ordering and stock management. Can this cutter be used on small CNC machines? The compact 65 mm overall length and moderate weight (0.248 kg) make the cutter suitable for small to medium CNC machines where space and rigidity must be balanced. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from precise, stable milling with the M16 screw-in interface and five cutting edges that deliver consistent material removal and reduced machining chatter; take advantage of the compact Ø 32 mm head for flexible tool setup — order directly via Metav Werkzeuge or consult our advisors for application support. Screw-in milling cutter VT233TM – M16 threaded cutter, Ø 32 mm, for EPMT 0603 indexable inserts by Teknik Makina Screw-in milling cutter VT233TM designed for secure insert clamping and versatile finishing tasks in workshop and production environments using EPMT 0603 indexable inserts Screw-in design with M16 thread Ø 32 mm cutting diameter Five cutting edges for stable machining Compatible with EPMT 0603 indexable inserts Predictable chip control and reliable surface finish The compact head geometry provides a predictable cutting behaviour that supports consistent results when machining repeat batches. With a 93° cutting angle and five cutting edges, the tool promotes even loading of the insert corners and helps to avoid premature wear on individual cutting corners. This leads to improved dimensional repeatability and a cleaner surface finish, especially beneficial where component tolerance and appearance matter. The described behaviour reduces rework and contributes to steady production throughput. Quick, secure mounting that reduces downtime Threaded mounting via the M16 thread and the dedicated Torx screw arrangement enables fast, repeatable tool changes. The supplied screw specification M2.5 x 5.5 together with a T7 Torx interface ensures secure clamping of the insert seat and straightforward maintenance procedures. A compact overall length of 60 mm and a modest weight of 0.197 kg make handling and setup easier at the machine spindle, shortening non-productive time between operations and simplifying inventory management for tooling spares. Compatibility that simplifies tooling logistics Engineered for use with EPMT 0603 indexable inserts and compatible with inserts from Hitachi, this cutter supports a standardised insert family that reduces the number of different parts kept in stock. The cutter’s cutting height (25.3 mm) and thread height (34.7 mm) match common mounting requirements in modular tooling systems, enabling quick adaptation to different holders or retrofit situations. Specification clarity and interchangeability help purchasing and production planners achieve cost-effective tool consolidation without compromising machining performance. Contact Metav Werkzeuge for tailored recommendations and to arrange supply of the Teknik Makina VT233TM screw-in milling cutter; technical advisors are available by phone or email to confirm suitability for specific applications Technical data Article number: VT233TM Manufacturer: Teknik Makina Type: Screw-in milling cutter for indexable inserts Compatible inserts: EPMT 0603 Compatible insert manufacturer: Hitachi SKU: VT233TM Facts Diameter: 32 mm Overall length: 60 mm Cutting height: 25.3 mm Thread height: 34.7 mm Thread: M16 Number of cutting edges: 5 Cutting angle: 93° Weight: 0.197 kg Torx screw: M2.5 x 5.5 Torx key size: T7 Special features Screw-in design for secure mounting Compatible with standard EPMT 0603 inserts Compact, service-friendly dimensions Suitable for modular tooling systems Manufacturer: Teknik Makina FAQ What inserts does the cutter accept? The cutter accepts EPMT 0603 indexable inserts and is compatible with inserts from Hitachi as stated for the VT233TM screw-in milling cutter. Which thread is used to mount the tool? Mounting is via an M16 thread; the cutter’s threaded interface ensures stable clamping in compatible holders. How many cutting edges are available on the head? The head is manufactured with five cutting edges, which promotes balanced cutting forces and longer tool life under suitable machining conditions. What are the key dimensions to check for holder compatibility? Check the Ø 32 mm head diameter, overall length 60 mm and thread height 34.7 mm to confirm compatibility with existing tool holders. What screw and key are required for insert fastening? Insert fastening uses a M2.5 x 5.5 Torx screw and a T7 Torx key for installation and service. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, repeatable holder that combines a secure M16 thread interface with acceptance of LNMU 0303 indexable inserts for reliable small-diameter milling; order the tool directly via Metav Werkzeuge or request consultancy if further specification is required. Screw-in Milling Cutter VT305TM — for LNMU 0303 indexable inserts, Ø 32 mm (Teknik Makina) The Screw-in Milling Cutter VT305TM is a compact tool holder designed for precision milling applications using standard LNMU 0303 indexable inserts, offering a space-saving design for confined tool paths and straightforward insert changes Screw-in cutter with M16 thread 32 mm cutting diameter Accepts LNMU 0303 indexable inserts Torx fixing screw M2.5x7 (T8) Secure insert clamping for consistent repeatability The screw-in design with an M16 thread provides a robust mechanical interface that minimises runout and promotes repeatable positioning of the cutting head. Paired with the supplied Torx M2.5x7 fixing screw and standard T8 key, the holder allows fast and secure clamping of the LNMU 0303 indexable inserts, enabling quick replacement during scheduled maintenance. This configuration reduces set-up time and helps maintain consistent cutting geometry across batches, supporting lean production and predictable tool life. Compact geometry that balances rigidity and access With a Ø 32 mm cutting diameter and a 63 mm overall length, the tool body is engineered to offer a compromise between stiffness and accessibility in tighter machining envelopes. The arrangement of 5 cutting edges distributes cutting forces and can improve surface stability on interrupted cuts or short-step milling operations. The compact dimensions are particularly useful in applications where clearance is limited or where multiple tools must be nested closely in the turret or toolchanger, ensuring the holder remains an effective option for general purpose and finish passes without excessive overhang. Standardisation to simplify inventory and operations Compatibility with the LNMU 0303 insert family and recognised insert supplier codes such as TNGLY-OKE supports parts standardisation across a workshop. Using a common insert type reduces the variety of spare parts held in stock and simplifies reordering, while the familiar Torx interface (T8) keeps the tool serviceable with standard hand tools. For procurement and technical planning the tool body is identified as VT305TM, making specification checks and BOM entries straightforward for purchasing departments and toolroom personnel. For procurement or technical advice on the Teknik Cutting Tools VT305TM screw-in milling cutter with an M16 thread, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: VT305TM Product: Screw-in milling cutter For inserts: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE Manufacturer: Teknik Makina Core data Cutting diameter: 32 mm Thread: M16 Overall length: 63 mm Cutting edges: 5 Torx screw: M2.5x7 Torx key: T8 Special features Accepts indexable inserts (LNMU 0303) Compact holder for restricted tool paths Standard Torx mounting for insert retention Identified SKU: VT305TM FAQ What insert type does this tool use? The tool accepts LNMU 0303 indexable inserts, which are mounted and secured by the Torx M2.5x7 screw in the VT305TM holder. Is the holder compatible with inserts from other manufacturers? Compatibility is specified for the TNGLY-OKE insert family; the VT305TM is designed to work with inserts matching the LNMU 0303 geometry and tolerances. What are the key dimensions to consider for setup? Important dimensions include a 32 mm cutting diameter and a 63 mm overall length; the holder is secured via an M16 screw-in thread. Which tool is required to change the insert? Insert clamping and removal use a Torx fixing screw M2.5x7, operated with a T8 key for secure and repeatable retention in the VT305TM holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of robust clamping and precise indexable-insert compatibility to increase machining stability and tool life; the compact design with Ø 32 mm diameter and M16 thread ensures straightforward integration into standard toolholders. Order the cutter directly via Metav Werkzeuge or consult the team for application-specific advice. Screw-in milling cutter VT155TM — for LNMX 0603 indexable inserts, Ø 32 mm, M16 thread (Teknik Makina) A screw-in milling cutter engineered to accept LNMX 0603 indexable inserts for reliable face and shoulder milling with quick, secure insert clamping. Screw-in holder with M16 thread Ø 32 mm cutting diameter Five cutting edges for higher feed Compatible with LNMX 0603 inserts Stable connection for consistent machining performance The VT155TM screw-in milling cutter combines a secure M16 thread with a compact overall length of 67 mm to reduce overhang and increase rigidity. The solid mechanical connection minimises vibration and run-out, which translates directly into improved surface finish and longer insert life. Specified dimensions and the precise clamping geometry make the tool a dependable choice when repeatability and toolholder stability are required on production-critical workpieces. Productivity through insert count and secure clamping Equipped for five effective cutting edges and designed for LNMX 0603 indexable inserts from Korloy, the holder allows frequent index changes while maintaining alignment accuracy. The clamping system uses an M3x7 Torx screw tightened with a T8 key, ensuring positive seat and consistent cutting performance across cycles. This configuration supports efficient chip evacuation and straightforward insert replacement, reducing downtime and supporting continuous machining workflows. Practical fitment and supply reliability Integration is simplified by the standardised screw-in interface and clear specifications: Ø 32 mm diameter and M16 thread permit immediate use with matched spindles or adapter sleeves. Supplied by Teknik Makina and distributed via Metav Werkzeuge, availability from a European stock point helps secure dependable replenishment and consistent lead times. For production environments where predictability matters, this insert holder offers a pragmatic combination of straightforward fitment and shop-floor resilience. Contact Metav Werkzeuge for tailored machining recommendations and to arrange prompt delivery from Emmerich for Teknik Cutting Tools' screw-in milling cutter VT155TM Technical data Article number: VT155TM Manufacturer: Teknik Makina (Teknik Cutting Tools) Facts Cutting diameter: 32 mm Thread: M16 Overall length: 67 mm Number of cutting edges: 5 Special features Compatible inserts: LNMX 0603 Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key size: T8 SKU: VT155TM FAQ Which inserts fit this screw-in milling cutter? The holder accepts LNMX 0603 indexable inserts; compatibility is specified for inserts from Korloy and other manufacturers producing the same ISO designation. What size is the clamping screw and which key is required? Clamping is effected with an M3x7 Torx screw and requires a T8 Torx key for secure tightening. What are the main dimensions to check for machine compatibility? Verify the Ø 32 mm cutting diameter, M16 screw-in thread and 67 mm overall length to ensure correct seating and clearance in the intended toolholder or adapter. Is this tool suited for frequent index changes in production? Yes; the design supports fast insert indexing and repeatable seating, making it suitable for operations with regular insert changes and high machine utilisation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a compact, screw-in design and proven indexable-insert compatibility to secure consistent milling performance and fast insert changes. Combine the M16 thread and robust Torx locking to reduce downtime—order via Metav Werkzeuge or request tailored advice from our consultants. VT182TM screw-in milling cutter — M16 thread, Ø32 mm (Teknik Makina) A compact VT182TM screw-in milling cutter designed for RPMT 10-12 indexable inserts, offering stable clamping for light to medium milling operations. M16 thread for secure clamping Ø32 mm cutting diameter Compatible with RPMT 10 indexable inserts Torx M3.5x8.5 screws, key T15 Consistent clamping for repeatable finishes The holder's M16 thread and dedicated locking parts ensure a rigid connection to the spindle or arbor, which directly improves repeatability and surface quality. With a locking screw sized M3.5 and a Torx screw M3.5x8.5 driven by a T15 key, the system minimises micro-movement at the insert seat. That mechanical stability translates into fewer reworks and predictable tool life, making the assembly a sound choice where dimensional consistency is critical. Fast insert changes that reduce machine downtime Designed for RPMT 10 indexable inserts, the cutter body accepts standard triangular inserts for quick replacement and economical tooling cycles. Compatibility with established manufacturers such as Mitsubishi allows straightforward sourcing of cutting edges. The indexable concept reduces setup time: worn edges are rotated or swapped without regrinding, improving throughput and keeping machining cells productive in small-batch and mixed-production environments. Compact geometry that balances reach and rigidity With an overall length of 68 mm, cutting height of 36 mm, and a cutting diameter of Ø32 mm, the tool offers a compact profile that limits overhang while providing sufficient engagement for common milling tasks. The shaft and thread geometry produce a low-mass, 0.189 kg assembly that is quick to handle yet engineered for stable cutting. Three cutting edges spread cutting forces evenly, supporting controlled chip formation and extending insert life where consistent chip evacuation is required. Contact Metav Werkzeuge in Emmerich for specification matching or to reserve the VT182TM screw-in milling cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VT182TM Manufacturer: Teknik Makina Facts Diameter: 32 mm Total length: 68 mm Cutting height: 36 mm Thread: M16 Thread height: 24.5 mm Number of cutting edges: 3 Weight: 0.189 kg Special features For RPMT 10 indexable inserts Compatible with Mitsubishi inserts Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 FAQ Which inserts fit this screw-in cutter? The VT182TM screw-in milling cutter is specified for RPMT 10 indexable inserts and supports RPMT 10–12 styles; Mitsubishi-compatible inserts are confirmed suitable for this holder. What thread and mounting are required? Mounting uses an M16 thread with a 24.5 mm thread height on the VT182TM, providing a secure screw-in connection for standard arbors. How is the insert clamped and serviced? Inserts are secured with a Torx M3.5x8.5 screw; service and replacement require a T15 Torx key and allow fast edge changes without special tools. What machining tasks suit this cutter? The compact geometry with Ø32 mm diameter and three cutting edges makes the VT182TM suitable for light to medium milling operations where rigidity and quick insert exchange are priorities. How does the tool support production efficiency? By combining a robust screw-in mount, standardised RPMT 10 inserts and simple Torx fastening, the VT182TM reduces setup times and maintains consistent cutting performance over repeated cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a compact holder that combines stable screw-in mounting, compatibility with SDMT 09T3 indexable inserts and a robust three-edge geometry to maintain production flow; order via Metav Werkzeuge or request specialist advice from the consultants. Screw-in milling cutter VT240TM – 32 mm diameter, M16 thread (Teknik Makina) The Screw-in milling cutter VT240TM is a screw-in cutter designed for efficient steel machining with SDMT 09T3 indexable inserts, suited to industrial turning and milling toolholders Compatible with SDMT 09T3 indexable inserts 32 mm cutting diameter M16 screw-in thread for secure mounting Three cutting edges for stable material removal High-performance cutting that reduces cycle times The holder’s 32 mm nominal diameter and three cutting edges deliver a balance of material removal rate and stability that supports consistent cycle times in serial production. The geometry is optimised for controlled chip formation when used with SDMT 09T3 indexable inserts from ZCC, which helps to maintain surface quality while reducing vibration. The clamping screw specification (Torx M3.5x8.5) and hex drive (T15) ensure repeatable insert retention, which translates into fewer stoppages for rework and predictable machining results. Quick insert changes and secure mounting for uptime Screw-in mounting via the M16 thread with a 29 mm thread engagement and a compact 69 mm overall length enables rapid exchange of the toolholder and minimal spindle downtime. At just 0.211 kg, the unit keeps tool overhang and centrifugal load modest, aiding tool life and spindle bearing longevity. The straightforward clamp design and widely used Torx screw mean insert replacements are fast and require only standard workshop tools, supporting lean maintenance routines and quick changeover in both single-shift and multi-shift operations. Built for precise steel machining with reliable repeatability Specifically aimed at high-quality steel machining, the construction supports consistent flank finish and dimensional control when combined with appropriate cutting data. The robust screw-in concept reduces axial play and improves concentricity compared with some modular holders, contributing to improved part tolerances and reduced scrap rates. The compact design and compatibility with proven insert geometries make the toolholder a practical choice for workshops seeking reproducible performance in steel turning and milling tasks using indexable inserts. The branded origin and model (Teknik Makina, VT240TM) provide traceability within industrial procurement and maintenance systems. Contact Metav Werkzeuge for tailored technical advice on the VT240TM screw-in milling cutter, availability from Emmerich and recommendations for insert grades and cutting parameters Technical data Article number: VT240TM Brand: Teknik Makina eClass: 21180806 ETIM: EC011860 Numbers / Core technical data Diameter: 32 mm Total length: 69 mm Cutting height: 40 mm Thread: M16 Thread engagement height: 29 mm Weight: 0.211 kg Cutting edges: 3 Special features Compatible with SDMT 09T3 indexable inserts Recommended insert manufacturer: ZCC Torx screw: M3.5x8.5 Torx key size: T15 Screw-in mounting type Suitable for high-quality steel machining FAQ Which inserts fit the holder? The holder accepts SDMT 09T3 indexable inserts; insert compatibility is specified for SDMT 09T3 from ZCC. What fastening parts are required for insert clamping? Insert clamping uses a Torx M3.5x8.5 screw, tightened with a T15 Torx key as supplied by standard workshop tool sets. How is the toolholder mounted in the spindle? Mounting is via the M16 screw-in thread with 29 mm thread engagement and a 69 mm overall tool length for compact installation. Is the VT240TM suitable for steel machining? Yes, the design and recommended insert geometry make the VT240TM appropriate for high-quality steel machining, providing stable cutting and repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust combination of high rigidity and quick insert changes: the tool’s 32 mm shank and 35 mm cutting length deliver stable shoulder milling with indexable inserts, while compatibility with ANHX 1004–1206 inserts keeps running costs low. Order this milling cutter directly via Metav Werkzeuge or request advice from the on-site consultants. Schaftfräser S765TM — insert milling cutter with Ø32 mm shank, compatible with ANHX 1004–1206 (Teknik Makina) The Schaftfräser S765TM is an indexable milling cutter engineered for productive shoulder and face milling applications using ANHX series indexable inserts. 32 mm shank diameter 35 mm effective cutting length Compatible with ANHX 1206 inserts Torx screw M3.5×8.5; key size T10 Stable cutting performance for demanding milling The solid construction and 32 mm shank provide high radial stiffness, which reduces vibration and improves surface finish during heavy-duty operations. The tool’s three cutting edges and 90° cutting angle are especially suited to shoulder milling and slotting where chatter resistance and repeatable geometry matter. For procurement and workshop planning, the robust mass (approx. 0.922 kg) and 150 mm overall length make it straightforward to check for clearance and toolholder compatibility. Quick insert changes that reduce downtime Designed around the ANHX family of inserts, the cutter enables fast indexable changes without complex regrinding. The ANHX 1206 pocket accepts standard insert sizes, simplifying inventory and cutting data harmonisation across machines. The retention system uses a Torx screw M3.5×8.5 with a T10 key, allowing secure clamping with standard maintenance tools and minimising changeover time on the shop floor. Compatibility and mounting for reliable integration With a 32 mm shank diameter, the cutter is compatible with common toolholders and clamping systems used in production workshops and jobbing shops. The axial dimensions and 35 mm cutting length balance reach and rigidity; the geometry supports precise step milling and finishing passes when combined with suitable feeds and speeds. For customers standardising tooling, the cutter’s acceptance of ANHX inserts (1004–1206) aligns with Palbit insert ranges to simplify spare parts management. Procurement confidence and workshop support Sourced from Teknik Makina and supplied via Metav’s distribution channel, the tool benefits from dependable logistics and clear specification data for ordering and planning. Performance claims focus on measurable attributes — shank size, cutting length and insert compatibility — so purchasing decisions can be based on verifiable technical parameters rather than marketing hyperbole. For complex applications, matching insert grade and cutting data to the component material is recommended to obtain the expected tool life and process reliability. For procurement or detailed technical advice on the Teknik Cutting Tools S765TM insert milling cutter, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 for tailored supply and rapid delivery. Technical data SKU: S765TM Brand: Teknik Makina Facts Shank diameter: 32 mm Effective cutting length: 35 mm Total length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.922 kg Special features Compatible inserts: ANHX 1206 Compatible insert range: ANHX 1004–1206 Torx screw: M3.5×8.5 Torx key size: T10 Compatible insert manufacturer: Palbit Application: Indexable milling cutter for shoulder/face milling FAQ Which inserts fit this cutter? The cutter accepts ANHX 1206 indexable inserts and supports the ANHX 1004–1206 range, allowing use of standard Palbit ANHX grades for common milling tasks. What is the shank diameter and is it compatible with standard holders? The tool features a 32 mm shank, suitable for common toolholders that accept Ø32 mm shanks; compatibility should be checked against the specific holder clamping length. How many cutting edges does the tool have and what is the cutting angle? The milling cutter is equipped with three cutting edges and a 90° cutting angle, optimised for stable shoulder milling and repetitive face passes. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M3.5×8.5; the corresponding key size is T10 for secure and repeatable clamping. Is this tool supplied with inserts? The product is supplied as an indexable milling cutter compatible with ANHX inserts; inserts are ordered separately in accordance with process requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a robust combination of stable clamping and fast insert changes: the solid 32 mm shank and four cutting edges ensure consistent performance, while compatibility with APMT 11T3 indexable inserts keeps tool management efficient. Order or request advice through Metav Werkzeuge for reliable delivery and technical guidance. Schaftfräser S242TM – Teknik Makina insert milling cutter for APMT 11T3, 32 mm shank The Schaftfräser S242TM is a shank milling cutter engineered for indexable-insert milling operations, optimising setup stability and changeover speed in production environments. Insert milling cutter for APMT 11T3 inserts 32 mm shank diameter for stable clamping Four cutting edges for efficient material removal Overall length 180 mm, cutting length 50 mm Stable clamping and consistent cutting for predictable results Built around a 32 mm shank, this insert milling cutter delivers enhanced rigidity and reduced vibration during machining, which translates to improved surface finish and longer insert life. The tool’s mass of 1.123 kg contributes to stable cutting dynamics without excessive spindle load, making it suitable for repeated face and peripheral milling cycles. With four cutting edges, chip load distribution is more even than single-edge alternatives, supporting steady material removal rates and predictable tool wear patterns. Fast insert changes that minimise downtime Compatibility with APMT 11T3 indexable inserts simplifies inventory and reduces set-up time. Insert retention is secured with an M2.5x5.5 Torx screw, operated with a T8 key, enabling rapid cartridge replacement and straightforward maintenance on the shop floor. The standardised fixing arrangement supports consistent seating of inserts and reliable repeatability after each change, helping to maintain production throughput and reduce unplanned stoppages. Designed for straightforward integration into milling operations The cutter’s 180 mm overall length and 50 mm cutting length provide a practical reach-to-stability ratio for many milling tasks, while a 90° cutting angle offers predictable engagement for angled and shoulder cuts. The tool is configured for use with recognised insert manufacturers such as Korloy, allowing straightforward sourcing of spare inserts. Its geometry and dimensions permit easy mounting in standard toolholders, so the component integrates quickly into existing tool setups without the need for special adaptors. Central supply and technical assurance from Metav Sourcing this industrial-grade milling solution through Metav brings logistical and technical benefits: a broad catalogue that simplifies procurement, a local warehousing presence that reduces lead times, and experienced advice to confirm fitment and application. For operations seeking reliable tooling with minimal administrative overhead, the combination of standardised inserts and a robust shank cutter supports efficient shop-floor routines and predictable production planning. Contact Metav Werkzeuge for tailored technical advice on the Teknik Cutting Tools S242TM shank cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical Data Article number: S242TM Manufacturer: Teknik Makina Description: Shank milling cutter for APMT 11T3 indexable inserts SKU: S242TM Facts Shank diameter: 32 mm Cutting length: 50 mm Overall length: 180 mm Weight: 1.123 kg Number of cutting edges: 4 Cutting angle: 90° Special features For APMT 11T3 indexable inserts Torx screw M2.5x5.5 Torx key T8 Compatible with Korloy inserts FAQ Which inserts fit this shank milling cutter? The cutter accepts APMT 11T3 indexable inserts; compatibility with Korloy-type inserts is specified for straightforward replacement. How are the inserts fastened and changed? Inserts are secured with an M2.5x5.5 Torx screw; removal and installation use a T8 key for quick, reliable changeovers. What are the key dimensions to check for toolholder fitment? Relevant dimensions include a 32 mm shank diameter, 50 mm cutting length and 180 mm overall length, plus the tool weight of 1.123 kg for balance considerations. How many cutting edges does the tool provide and what is the benefit? The tool features four cutting edges, which distribute the chip load and support consistent material removal and improved surface quality. Is the cutter suitable for shoulder and face milling? Yes, the combination of a 90° cutting angle and the specified cutting length makes the tool suitable for both shoulder and face milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Benefit from a robust indexable milling solution with a Ø 32 mm shank, 3 cutting edges and full compatibility with ENMX 0905 inserts; efficient set-up and reliable clamping help to reduce downtime and maintain consistent cycle times. Order directly via Metav Werkzeuge or consult our specialists for setup advice. S935TM milling cutter – indexable milling cutter, Ø 32 mm, 3 cutting edges (Teknik Makina) A S935TM milling cutter engineered for use with ENMX 0905 indexable inserts, optimised for stable milling operations in CNC machining centres and industrial workshops. Indexable design for ENMX 0905 inserts Stable Ø 32 mm shank for precise clamping Three cutting edges for smooth material removal Torx M3.5x8.6 screw with T16 key Greater throughput through indexable tooling and robust geometry The tool body is designed around indexable inserts, offering predictable tool life and quick index changes that lower per-part costs. With a Ø 32 mm shank and a design accommodating ENMX 0905 plates, the cutter delivers repeatable concentricity, which supports tighter tolerances and consistent surface finish. The combination of a rigid shank and three cutting edges reduces vibration and improves chip control, translating into measurable productivity gains on batch and continuous runs. Secure clamping and fast changeover for production reliability A secure clamping system is provided via the specified Torx screw M3.5x8.6 and matching T16 key, which ensures the insert seats are held firmly during heavy cuts and at higher feed rates. The mechanical simplicity of the fastening reduces changeover time and the risk of assembly errors, supporting shorter tool-change cycles. This design choice supports maintenance routines with predictable torque values and straightforward spare-part handling, helping to maintain uptime in the shop. Practical workshop compatibility and economical tooling strategy The cutter’s overall length 160 mm and matching shank diameter 32 mm make it suitable for standard toolholders and collet systems, enabling easy integration into existing tool sets. Compatibility with YG-1-manufactured inserts and the ENMX 0905 format offers broad availability of insert grades for various materials and cutting conditions. By using indexable plates rather than solid cutters, the mill body reduces tooling spend over time while allowing process engineers to select the most appropriate insert grade for the application. Contact Metav Werkzeuge for further technical details or to discuss application-specific setups; Metav Werkzeuge provides direct delivery from Emmerich and expert advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S935TM Manufacturer: Teknik Makina Model designation: Schaftfräser for ENMX 0905 indexable inserts Compatible insert type: ENMX 0905 Compatible insert manufacturer: YG-1 Dimensions & cutting data Diameter: 32 mm Shank / clamping diameter: 32 mm Overall length: 160 mm Number of cutting edges: 3 Features & compatibility Torx screw: M3.5x8.6 Torx key: T16 Designed for indexable inserts ENMX 0905 Suited for CNC milling and industrial workshop use FAQ Which insert type fits this milling cutter? The S935TM milling cutter accepts ENMX 0905 indexable inserts; the design is matched to common ENMX geometries. Which insert manufacturers are compatible? The cutter is compatible with inserts from YG-1, enabling access to a wide range of grades for varied materials. What shank diameter and overall length does the tool have? The tool features a 32 mm shank diameter and an overall length of 160 mm, suitable for standard collet and holder systems. How many cutting edges does the cutter use? This tool uses 3 cutting edges, balancing material removal rate with surface finish and cutting forces. What screw and key are required for insert fastening? Insert clamping requires a Torx screw M3.5x8.6 and a T16 key for installation and secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com