Robust high-speed steel (HSS) construction combined with precise Whitworth G 1" x 11 tpi geometry delivers durable, repeatable pipe threads for workshop and industrial use. The solid 25 mm shank and right-hand cutting make the tap suitable for both through and blind holes; order the tool via Metav Werkzeuge or consult the technical team for selection support. TECWERK HSS hand tap DIN 5157 No.2 — G 1" x 11 tpi, 25 mm shank The TECWERK HSS hand tap DIN 5157 No.2 is a manual pipe-threading tap for Whitworth G pipes (ISO 228), engineered for workshop threading in steel and general maintenance applications High-speed steel (HSS) design Whitworth pipe thread G 1" x 11 tpi Suitable for through and blind holes For steels up to ~900 N/mm² tensile strength Consistent pipe threads through proven materials and standards Manufactured from high-speed steel (HSS), this hand tap is built for consistent performance when cutting Whitworth pipe threads. Conforming to ISO 228 and DIN 5157 No.2, the geometry ensures that each pass produces repeatable results suitable for assembly and maintenance tasks. The right-hand cutting configuration is compatible with standard tap holders and manual tap wrenches, while the robust flute form supports reliable chip evacuation. The tool’s specification for steels up to ≈900 N/mm² gives a clear indication of mechanical limits, allowing production planners and workshop technicians to select the correct tool for mild and medium-strength steel workpieces. Practical benefits for workshop workflows and repair tasks The combination of an established G 1" x 11 tpi thread form and a 25 mm shank offers practical advantages: stable clamping in holders, reduced vibration, and consistent thread profiles that lower rework rates. Designed for both through and blind holes, the tap handles common pipe-threading situations without the need for multiple specialised tools. The HSS cutting material provides a balance of hardness and toughness, meaning longer tool life under typical workshop conditions and predictable maintenance intervals. Clear standards compliance (ISO 228, DIN 5157) simplifies quality assurance and documentation in regulated environments. Where this tap adds value and reduces downtime In maintenance, plumbing retrofit and light production environments, this hand tap enables precise threading with minimal setup. The solid shank diameter aids secure holding in manual or light machine tap holders, promoting alignment and reducing the risk of damaged threads. For operations that prioritise uptime, the durability of HSS and the standardised G thread form support quick replacements and straightforward spare-part management. Overall, the tool helps streamline workflows by delivering reliable threads, cutting down on assembly failures and improving overall process efficiency. For reliable G 1" x 11 pipe threads choose the TECWERK HSS hand tap and contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867147NW Product: HSS hand tap DIN 5157 No.2 G 1" x 11 tpi Brand: TECWERK Packaging unit: 1 Core technical data Shank diameter: 25 mm Thread: G 1" x 11 tpi Material performance: for steels up to approx. 900 N/mm² Packaging unit: 1 Special features High-speed steel (HSS) Whitworth pipe thread G to ISO 228 Right-hand cutting For through and blind holes Standard: DIN 5157 No.2 Hand tap (manual use) FAQ Which materials can be machined with this tap? The TECWERK HSS hand tap is designed for machining steels and is specified for use in materials up to approximately 900 N/mm² tensile strength; it is suitable for typical workshop steelwork. Is the tap suitable for blind-hole threading? Yes, the tool is intended for both through and blind holes and features flute geometry that supports chip evacuation in blind-hole conditions. What thread standard does the tap produce? The tap cuts a Whitworth pipe thread in accordance with ISO 228 — specifically G 1" x 11 tpi — and complies with DIN 5157 No.2. How should the tap be clamped for best results? A secure clamping arrangement matching the 25 mm shank is recommended; stable holding in a manual tap wrench or tap holder reduces runout and ensures consistent thread quality. What is the article number for ordering and reference? Order reference: 2000867147NW for the TECWERK HSS hand tap DIN 5157 No.2 Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of precision-engineered pipe threading combined with durable HSS cutting material and a two-stage tapping sequence for consistently reliable BSPP connections; order the set via Metav Werkzeuge or consult our advisers for application-specific guidance. Hand tap set DIN 5157 G 1 inch HSS ISO 228, 2-piece – TECWERK Hand tap set DIN 5157 G 1 inch HSS ISO 228, 2-piece – TECWERK is a manual tapping kit for producing BSPP (ISO 228) G 1" parallel pipe threads in workshop and industrial environments HSS cutting material BSPP (ISO 228) G 1" parallel thread Two-piece set: roughing and finishing Shank Ø 25 mm, 11 TPI Consistent, standard-compliant pipe threads for assembly reliability The kit provides a controlled two-stage process to form BSPP (Whitworth pipe thread G) threads to ISO 228 dimensions, delivering repeatable sealing surfaces for fittings. Made from HSS, the cutters preserve cutting geometry under normal workshop use and support regrinding where required. The 11 TPI specification matches the nominal G 1" standard, ensuring compatibility with common pipe fittings and reducing rework on assemblies. Workflow advantages through staged cutting and robust shank design The two-piece composition—roughing and finishing tap—reduces cutting forces per pass and lowers the risk of tap breakage in blind or through holes. The substantial shank Ø 25 mm offers improved concentricity and stability in hand-held tapping wrenches or machine guides, translating into straighter threads and fewer rejects. Right-hand cutting geometry ensures standard rotational direction and predictable chip formation during manual tapping operations. Material capability and application limits explained clearly Designed for use in steels with tensile strength of up to approx. 900 N/mm², the set is suitable for many construction and mechanical applications that require parallel pipe threads. The designation for through and blind holes means the tools are versatile for both open-ended components and enclosed bores; appropriate tapping lubricant and correct feed should be used to preserve tool life. The use of HSS combines toughness and wear resistance, making the taps dependable across repeated cycles. Practical handling, maintenance and safe operation in workshop settings For best results, secure the workpiece and ensure the tapping axis is perpendicular to the bore before starting. Use light, consistent pressure with the roughing tap, then complete the thread with the finishing cutter to achieve the final tolerance. Regular inspection and regrinding of the HSS cutting edges, combined with appropriate cleaning of chips, extends service life and maintains thread quality. Proper handling reduces the likelihood of tool breakage and supports predictable production. For reliable BSPP threading in workshops, select the TECWERK hand tap set and contact Metav Werkzeuge for tailored advice or to arrange supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867097NW Label: Handgewindebohrersatz DIN 5157 G 1 Zoll HSS ISO 228 2tlg.TECWERK Manufacturer: TECWERK Packaging unit: 1 Specifications Shank diameter: 25 mm Threads per inch: 11 TPI Set pieces: 2 Suitable material tensile strength: up to approx. 900 N/mm² Features Cutting material: HSS Thread type: BSPP / Whitworth pipe thread G (ISO 228) Cutting direction: right-hand cutting Application: through and blind holes Tap types: roughing and finishing FAQ Which thread standard does the set produce? The TECWERK hand tap set creates BSPP (Whitworth pipe thread G) threads to ISO 228 dimensions for a G 1" connection, with 11 TPI as specified. What components are included in the kit? The set comprises two taps: a roughing (starter) tap and a finishing tap, supplied as a 2-piece manual tapping kit under SKU 2000867097NW. Which materials are suitable for these taps? These taps are intended for machining steels with tensile strength up to about 900 N/mm² and are suitable for both through and blind hole operations when used with correct lubrication. How should the taps be maintained? Maintain cutting performance by cleaning chips after use, applying suitable tapping lubricant during operation, and arranging regrinding of the HSS cutters when wear becomes evident. Are the taps suitable for machine tapping as well as hand use? The robust shank Ø 25 mm and standard thread form allow these taps to be used with compatible machine guides or hand-tapping wrenches, observing appropriate speed and feed for HSS tooling. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of precise metric fine-thread performance and robust HSS durability to produce accurate, repeatable threads in steel; the paired pre- and finishing cutters ensure clean results and extended tool life. Order the TECWERK hand tap set directly via Metav Werkzeuge or ask our consultants if needed. Hand tap set DIN 2181 MF10x1mm HSS ISO2 (6H) — TECWERK metric fine-thread taps with ISO2 tolerance A Hand tap set DIN 2181 MF10x1mm HSS ISO2 (6H) from TECWERK designed for precision metric fine-thread tapping in steel components HSS cutting material for longevity Metric fine thread MF10x1 to DIN 13 ISO2 tolerance (6H) for accurate fits Suitable for through and blind holes Precision threading for demanding applications The Hand tap set DIN 2181 MF10x1 HSS ISO2 (6H) delivers high-precision metric fine threads compliant with DIN 13, combining the wear resistance of HSS with the dimensional reliability of ISO2 (6H) tolerance. Specified for MF10×1 threads and rated for steels up to 900 N/mm², the kit reduces the need for rework by ensuring consistent thread profiles. For engineers and workshop managers this means fewer rejects and tighter assembly tolerances without complex adjustments. Paired cutters for consistent thread quality A two-stage tapping approach with a pre- and finishing cutter provides progressive material removal, improving surface finish and reducing chip load. The tools are right-hand cutting and designed for both through and blind holes, helping to avoid thread distortion in sensitive components. The compact shank Ø 7 mm makes the set compatible with a wide range of hand holders and machines used in general workshop environments, while careful geometry control minimises the risk of tap breakage during interrupted cuts. Engineered for workshop efficiency and repeatability Built from HSS and optimised for routine shop-floor use, the set supports reliable production cycles and longer service intervals through stable cutting edges and consistent chip evacuation. The solid construction contributes to fast, repeatable tapping operations and improved process stability. For practical use, correct lubrication and appropriate spindle control will further extend tool life and ensure clean thread runs; technical queries can be clarified with Metav’s advisory resources to match tooling to specific workflows. For tailored technical advice or to secure this TECWERK tap set, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 2000867059NW Description: Hand tap set DIN 2181 MF10x1mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: MF10×1 mm Tolerance: ISO2 (6H) Material strength suitability: up to approx. 900 N/mm² Shank diameter: 7 mm Special features Cutting material: HSS Standard: DIN 13 Right-hand cutting For through and blind holes Paired pre- and finishing cutter FAQ What materials can be tapped with this set? The TECWERK hand tap set is suitable for machining steels up to approximately 900 N/mm² tensile strength; the HSS cutting material provides the necessary wear resistance for these applications. What does ISO2 (6H) tolerance mean for assembly? ISO2 (6H) indicates a standard metric tolerance class that delivers precise internal thread diameters, helping to achieve consistent fits and reliable assembly without additional adjustment. Can the set be used for blind holes? Yes, the geometry is specified for both through and blind holes, and the paired cutters help to control chip formation when tapping into closed bores. Which holder or machine fits the taps? The taps have a shank Ø 7 mm, making them compatible with common hand holders and light machine tap holders used in workshop settings. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS cutting material, standardised ISO2 (6H) tolerance and compatibility with both through and blind-hole threading for reliable, repeatable assemblies; order directly via Metav Werkzeuge or consult our advisors for tailored recommendations. Hand tap No.2 MF10×1 mm — HSS finishing tap (DIN 2181, ISO2/6H) by TECWERK A precision Hand tap No.2 MF10×1 mm designed for cutting metric fine threads in steels up to approximately 900 N/mm², suitable for both through and blind-hole applications. HSS material for durable cutting Metric fine thread MF10×1 mm ISO2 (6H) tolerance for precision Suitable for through and blind holes Consistent thread accuracy for demanding assemblies This finishing tap follows the DIN 2181 specification and the ISO2 (6H) tolerance class, ensuring consistent thread geometry and interchangeability in fine-thread applications. The combination of standardised dimensions and a finishing cut reduces the need for subsequent rework and supports predictable assembly performance. The MF10×1 mm designation denotes a metric fine thread with a 1 mm pitch, which is commonly used where a finer pitch improves clamping control and vibration resistance in mechanical joints. Robust cutting performance and tool life Manufactured from HSS, the tool offers improved wear resistance and toughness compared with general-purpose steels, making it suitable for repeated hand tapping in tougher materials. The geometry is optimised for right-hand cutting and the tap is rated for use in steels up to around 900 N/mm², providing a balance between cutting efficiency and flank strength. Using a finishing tap reduces burr formation and delivers a cleaner root and flank, which translates into longer component life and more reliable assembly behaviour. Practical handling that increases shop-floor efficiency With a compact design and a shank Ø 7 mm, the tap is straightforward to mount in standard tap handles or holders; the shank size provides secure clamping while keeping the tooling compact for confined spaces. The tool’s suitability for both through and blind holes makes it a flexible choice for mixed production runs, reducing tool changes and simplifying inventory. The finishing cut characteristic of this tap makes it particularly useful when thread tolerance and surface finish are critical, enabling predictable torque and preload during assembly. Typical uses and benefits across industries This finishing tap is well matched to workshops and production environments that require fine-thread fastenings, such as precision fixtures, hydraulic assemblies and instrumentation. The standard-compliant thread form and HSS construction provide a reliable foundation for repeatable thread quality, helping to lower rejection rates and minimise downtime. For operations seeking dependable manual tapping solutions with a small footprint, this tool delivers targeted performance where fine threads and tight tolerances are required. Contact Metav Werkzeuge for individual guidance on integrating TECWERK finishing taps into production — our specialists at Metav Werkzeuge can advise on selection and compatibility to ensure the right tool for each application. Technical data Article number: 2000867083NW Designation: Hand tap DIN 2181 finishing tap No.2 MF10×1 mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: MF10×1 mm Shank diameter: 7 mm Suitable for steels up to approx. 900 N/mm² Tolerance: ISO2 (6H) Special features HSS cutting material For through and blind holes Right-hand cutting Conforms to DIN 2181 Finishing tap for metric fine threads FAQ What thread form does this tap produce? The tap cuts a metric fine thread in size MF10×1 mm, producing the DIN 13-compliant profile as a finishing tap. Is the tool suitable for hardened steels? This TECWERK finishing tap (SKU 2000867083NW) is intended for steels up to approximately 900 N/mm² tensile strength; it is not specified for significantly hardened materials. Can the tap be used in blind holes? Yes, the tool is designed for both through and blind-hole applications and provides a finishing cut to improve thread quality in confined bores. What are the key advantages of the HSS material? HSS offers enhanced wear resistance and toughness, giving the tap good durability during manual tapping and consistent cutting performance over multiple cycles. Which shank size is required for mounting? The tap has a shank Ø 7 mm, which fits standard tap handles and small holders for secure clamping. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Reliable two-piece hand tap set combining durable HSS cutting material with ISO2 (6H) tolerance for precise MF 12 x 1.5 mm metric fine threads; suitable for both through and blind holes and for steels up to approx. 900 N/mm². Order the TECWERK set directly via Metav Werkzeuge or ask our consultants if needed. TECWERK hand tap set DIN 2181 — MF 12 x 1.5 mm, HSS, ISO2 (6H) The TECWERK hand tap set DIN 2181 MF 12 x 1.5 mm is intended for manual cutting of metric fine threads in through and blind holes, delivering consistent ISO2 (6H) internal thread quality. HSS construction for durable cutting ISO2 (6H) tolerance for precise fits For through and blind hole threading 2-piece set: starter and finishing tap Precise threads that reduce rework The combination of HSS cutting material and the ISO2 (6H) tolerance field ensures consistently accurate internal threads for MF 12 x 1.5 mm applications. The defined tolerance reduces play between mating parts and minimises the need for subsequent fitting or corrective grinding, which supports a more efficient production flow. The standardised thread quality is particularly valuable in assemblies where repeatable fit and alignment are essential, helping to lower scrap rates and assembly time. Performance for demanding steel grades This tap set is specified for use in steels up to around 900 N/mm², making it suitable for many common engineering applications. The right-hand cutting geometry and robust HSS substrate maintain cutting performance under moderate loads while preserving tool life. When machining harder steels, adopting correct feed and lubrication practices improves results and reduces the risk of tap breakage; the material limits given indicate reliable performance within these ranges rather than suitability for hardened steels. Designed for manual handling and secure guidance Conforming to DIN 2181, the set comprises a starter and finishing tap in a 2-piece set, designed to streamline thread formation in hand-operated work. The Shaft Ø 9 mm provides a stable grip and straightforward centring in common tap handles and holders, improving control during manual tapping. Using the starter tap first reduces torque peaks and guides the finishing tap to the final form, lowering thread distortion and the risk of cross-threading. Practical compatibility and workshop benefits The taps are intended for both through and blind holes, offering flexible use across maintenance and production tasks. The compact set format supports lean tooling practices: fewer tool changes, predictable thread tolerances and straightforward storage. For workshop planners and buyers, the clear technical specification simplifies inventory management and supports standardisation of thread-making operations across multiple workstations. For assured workshop accuracy, choose the TECWERK hand tap set and arrange supply through Metav Werkzeuge GmbH — for personal advice and reliable delivery contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867061NW Model: TECWERK hand tap set DIN 2181 MF 12 x 1.5 mm Manufacturer: TECWERK Packaging unit: 1 Key Specifications Thread size: MF 12 x 1.5 mm Number of pieces: 2 Shaft diameter: 9 mm Suitable for steels up to: ~900 N/mm² Tolerance: ISO2 (6H) Special features HSS cutting material DIN 2181 standard Right-hand cutting For through and blind holes Starter and finishing tap FAQ What thread form does this set produce? The TECWERK hand tap set produces an MF 12 x 1.5 mm metric fine internal thread with ISO2 (6H) tolerance, suitable for standard mechanical assemblies. Which materials can be machined with this tap set? The set is specified for use in steels up to approx. 900 N/mm²; the HSS material provides durability for common engineering steels. Is the set suitable for blind holes? Yes — the 2-piece configuration supports threading in both through and blind holes, with the starter tap easing initial entry. What does the two-piece format include? The package contains a starter (pre-cut) and a finishing tap to achieve the final thread form and tolerance. What is the shaft diameter and how is the set intended to be used? The shafts are Ø 9 mm and the set is intended for manual tapping with suitable tap handles or holders; for powered tapping, verify machine suitability separately. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combine reliable HSS cutting performance with an ISO2 (6H) tolerance for consistent MF12×1.5 finishing threads; order the tap directly via Metav Werkzeuge or ask the consultants for tailored technical advice. Hand tap DIN 2181 No.2 MF12x1.5mm HSS ISO2 (6H) — TECWERK finishing tap A Hand tap DIN 2181 No.2 MF12x1.5mm HSS ISO2 (6H) designed for producing metric fine threads in through and blind holes, suitable for steels up to approx. 900 N/mm². DIN 2181 finishing tap, right-hand cut HSS cutting material for durability Tolerance class ISO2 (6H) Suitable for through and blind holes Precision finishing that reduces rework and ensures fit As a finishing tap, this cutting tool is optimised to produce the final thread profile with close dimensional control. The ISO2 (6H) tolerance provides a predictable fit for mating parts, reducing the need for subsequent rework or measurement cycles. The finishing geometry removes minimal material while forming a clean flank, which directly improves assembly reliability and repeatability in production runs. Robust material and usable limits explained Manufactured from HSS, the tool offers sustained sharpness and toughness for manual threading tasks. The specified capacity for steels up to approx. 900 N/mm² means the tap is suitable for a broad range of mild and medium-alloy steels commonly used in workshops. The shank Ø 9 mm allows secure clamping in standard tap wrenches or handheld holders, while the right-hand cutting direction matches conventional threading practice. Practical handling and process recommendations For consistent results, use appropriate cutting fluid and controlled feed during hand tapping to support chip evacuation and extend tool life. When producing threads in blind holes, withdraw the tap periodically to clear chips; for through holes a steady stroke typically suffices. The finishing geometry is not intended for roughing; use a plug or intermediate tap for heavier stock removal before switching to the finishing cutter to achieve the specified MF12x1.5 accuracy. Workshop benefits and supply reliability The finishing tap integrates into standard tooling assortments and supports quality-oriented shops seeking dependable thread precision. Its conformity to DIN 2181 and the ISO2 (6H) tolerance assists in meeting inspection criteria without complex measurement setups. Supplied through Metav’s distribution, the tool benefits from a consolidated procurement process and consistent availability for production or maintenance needs. Contact Metav Werkzeuge for personalised technical advice and to secure the TECWERK finishing tap for reliable MF12x1.5 thread production Technical data Article number: 2000867085NW Designation: Hand tap DIN 2181 No.2 MF12x1.5mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Package unit: 1 UID: 2000867085NW Core specifications Thread: MF12 x 1.5 mm Shank diameter: 9 mm Strength capability: up to approx. 900 N/mm² Tolerance class: ISO2 (6H) Standard: DIN 2181 Special features Material: HSS Right-hand cutting For through and blind holes Finishing tap geometry FAQ What materials can this tap machine reliably thread? The TECWERK finishing tap is specified for use in steels up to approximately 900 N/mm²; its HSS construction is suitable for common mild and medium-alloy steels. Is this tap suitable for blind-hole threading? Yes — the tool is designed for both through and blind holes; when tapping blind holes with this finishing tap, withdraw periodically to clear chips. What tolerance and fit does the tap deliver? With ISO2 (6H) tolerance the tap produces a standard metric fine thread fit, appropriate for consistent assembly with corresponding ISO-classified fasteners. Can the tap be used directly after drilling without a pilot or intermediate tap? For best results, use an appropriate drill size and consider an intermediate tap for heavy material removal; the finishing tap is optimised for the final pass to achieve accurate thread form. Which holder or wrench fits the shank? The shank Ø 9 mm allows clamping in standard manual tap wrenches and holders compatible with a 9 mm shank diameter. Is this tap suitable for high-speed machine tapping? This item is specified as a hand finishing tap; machine use is not covered in the specifications and would require verification of clamping and speed parameters against the tool’s intended application. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

High-precision HSS cutting and an ISO2 (6H) tolerance deliver consistent fine-thread quality, while the two-stage configuration reduces rework and increases throughput; order the set directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Hand tap set DIN 2181 MF14 x 1.5 HSS ISO2 (6H) – 2-piece set, TECWERK The Hand tap set DIN 2181 MF14 x 1.5 HSS ISO2 (6H) – 2-piece set, TECWERK is designed for reliable production of metric fine threads in a wide range of steels, suitable for both through and blind hole tapping in workshop and maintenance environments. HSS cutting material for durability and wear resistance Metric fine thread MF14 x 1.5, ISO2 (6H) tolerance Suitable for steel up to 900 N/mm² tensile strength Two-piece set: roughing and finishing tap Precision thread form for repeatable assembly performance Producing a consistent MF14 x 1.5 thread with an ISO2 (6H) tolerance ensures reliable mating with standard fine-thread fasteners and reduces assembly rejections. The set follows DIN 2181 specifications, which means the thread geometry and pitch are aligned with established industry norms, simplifying inspection and interchangeability. By choosing HSS as the cutting material, the set combines toughness with good wear resistance; this is particularly relevant in mixed-production runs where repeatability and dimensional stability matter. The result is predictable tightening behaviour and fewer rejects on the production line. Two-stage tapping for smoother chip control and longer tool life The two-piece arrangement—one roughing tap and one finishing tap—splits material removal into distinct stages to lower cutting forces and improve chip evacuation. The roughing tap removes the bulk of the material and makes chip formation more manageable, while the finishing tap restores final geometry and surface finish. This staged approach reduces torque peaks in hand or machine tapping, which decreases the likelihood of tap breakage and extends the service life of the tooling. The 11 mm shank offers a sturdy connection for tap holders and manual tap wrenches, giving a balanced compromise between rigidity and accessibility in confined bores. Robust performance across common steels and hole types Engineered for use in steels up to 900 N/mm² tensile strength, the set is suitable for many maintenance and light industrial applications. The hand taps are specified for both through and blind holes, so they handle typical workshop scenarios without the need for multiple specialised tools. Right-hand cutting geometry delivers familiar machining behaviour and straightforward feed direction. For operations where surface finish and fit precision are critical, the combination of HSS material, ISO tolerance and the two-stage method provides a cost-effective route to achieve required thread quality with reduced rework rates. For precise metric fine-thread tapping and application advice, contact Metav Werkzeuge in Emmerich for specification support or order the TECWERK MF14 x 1.5 two-piece hand tap set directly from stock Technical data Article number: 2000867062NW Name: Hand tap set DIN 2181 MF14 x 1.5 HSS ISO2 (6H) – 2-piece, TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867062NW Facts Thread size: MF14 x 1.5 Set composition: 2 pieces Shank diameter: 11 mm Suitable material strength: up to 900 N/mm² Special features Cutting material: HSS Tolerance field: ISO2 (6H) Standards: DIN 2181, referenced DIN 13 Cutting direction: right-hand Application: through holes and blind holes Set types: roughing and finishing tap FAQ What materials can this set machine reliably? The Hand tap set DIN 2181 MF14 x 1.5 HSS ISO2 (6H) – 2-piece set, TECWERK is specified for steels up to approximately 900 N/mm² tensile strength and performs reliably in common construction and engineering steels. Is the set suitable for blind-hole tapping? Yes, the TECWERK two-piece hand tap set is designed for both through and blind holes and its two-stage configuration helps control chips in shallower or interrupted bores. What tolerance and fit does the tapping produce? Threads produced by the set conform to ISO2 (6H) tolerance, giving a standard close-fit metric fine thread suitable for general engineering assemblies. Why use a two-piece set instead of a single tap? The roughing and finishing taps split cutting duties: the roughing tap removes bulk material while the finishing tap restores final dimensions and surface quality, reducing tool stress and improving thread accuracy. What toolholding size is required for these taps? The supplied taps have an 11 mm shank, which is compatible with standard tap holders and manual tap wrenches that accept this shank diameter. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS cutting material, compliance with DIN ISO 228, and the practical two-piece set for fast thread production; order the TECWERK hand tap set G 1/2" directly via Metav Werkzeuge or ask our consultants if needed. TECWERK hand tap set G 1/2" — HSS, DIN ISO 228, 2-piece A compact hand tap set designed for Whitworth pipe threads G 1/2", suitable for both through and blind holes in steels up to approx. 900 N/mm². HSS cutting material for long tool life Whitworth pipe thread G 1/2" (14 tpi) compatibility Two-piece set: roughing and finishing taps Shank Ø 16 mm for sturdy clamping Faster, reliable thread making for workshop routines The solid high-speed steel (HSS) construction delivers a consistent cutting edge, which translates into longer service life and fewer tool changes in daily use. Compliance with DIN ISO 228 ensures threads meet established pipe-fitting standards, supporting predictable assembly and leakage-free connections. The combination of a roughing and a finishing tap reduces machining time: the first tool removes material rapidly, while the second ensures the final thread tolerance and surface. This sequence increases throughput without sacrificing precision and is particularly effective where repeatability matters. Practical design that simplifies machining and reduces downtime Equipped for both through-hole and blind-hole applications, the set’s right-hand cutting geometry and clear designation for G 1/2" (14 tpi) threads make selection straightforward for maintenance and fabrication tasks. The robust shank diameter of 16 mm provides secure clamping in standard tap holders and T-handles, reducing wobble and improving concentricity. The two-piece approach helps avoid premature wear: the roughing tap lowers cutting forces, while the finishing tap restores geometry, resulting in cleaner threads and less rework for trades such as plumbing, hydraulics and workshop fabrication. Durable workmanship, straightforward standards, and shop-friendly handling The taps are specified for steels up to approximately 900 N/mm² tensile strength, covering a wide range of common construction and engineering grades. The solid HSS cutting material resists abrasion and heat better than carbon steel, extending service intervals and lowering lifecycle costs. For users seeking reliable, standards-compliant thread production without extensive setup, this set combines simplicity, robustness, and industry conformity, fitting well into a stocked tooling cabinet or mobile service kit. For robust, standards-ready pipe-threading choose the TECWERK HSS two-piece set and contact Metav Werkzeuge for procurement or technical advice — Metav’s specialists in Emmerich are available to assist with selection and compatibility checks Technical Data Article number: 2000867095NW Product: Hand tap set DIN 5157 G 1/2 in HSS ISO 228 2pc TECWERK Manufacturer: TECWERK Facts Set composition: 2 pieces (roughing tap + finishing tap) Shank diameter: 16 mm Thread: Whitworth pipe thread G 1/2" — 14 tpi Material suitability: steels up to approx. 900 N/mm² Cutting direction: right-hand Special features Cutting material: HSS Standard: DIN ISO 228 Applications: through holes and blind holes Designation: suitable for Whitworth pipe thread production FAQ What thread form does this set produce? The set produces a Whitworth pipe thread G 1/2" (14 tpi) in accordance with DIN ISO 228, suitable for standard pipe fittings. Can the taps be used in blind holes? Yes. The two-piece configuration is specified for both through holes and blind holes, allowing controlled depth machining and a clean thread profile. Which materials are appropriate for these taps? The taps are made from HSS and specified for steels with tensile strength up to approximately 900 N/mm²; they are therefore suitable for common engineering steels. What is the advantage of the two-piece set? Using a roughing tap followed by a finishing tap reduces cutting forces, improves thread finish and extends tool life compared with single-step tapping. What is the article number or SKU for ordering? The article number is 2000867095NW and the item is listed as the TECWERK hand tap set G 1/2" HSS ISO 228 2pc. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust, high-speed steel finishing tap that delivers precise MF16×1.5 threads with an ISO2 (6H) tolerance and is suitable for both through and blind holes in steels up to 900 N/mm²; order directly via Metav Werkzeuge or consult the specialists for application guidance. TECWERK Hand finishing tap DIN 2181 — MF16×1.5 HSS, ISO2 (6H) The TECWERK Hand finishing tap MF16×1.5 is a precision metric fine-thread finishing tool designed for reliable threading in workshop and industrial environments. HSS construction for long tool life Metric fine thread MF16×1.5 ISO2 (6H) Suitable for through and blind holes Shank Ø 12 mm for secure clamping Accurate metric fine threads for reliable assemblies The finishing tap produces MF16×1.5 metric fine threads to the ISO2 (6H) tolerance, delivering consistent fit and engagement for mating fasteners. As a finishing tool, the thread form is completed to final dimensions, which reduces the need for subsequent rework and ensures predictable assembly behaviour. The DIN references assure compatibility with standard fasteners and simplify production planning by aligning with established industrial norms. Durable HSS body to cope with demanding steels Made from HSS, the tool offers a balance of toughness and wear resistance, suitable for threading steels with tensile strength up to 900 N/mm². The high-speed steel construction helps to resist premature wear and chipping during repeated use, extending tool life and reducing replacement frequency. The tap’s right-hand cutting geometry is optimised for standard machining directions, providing clean chips and a secure cutting action in typical workshop operations. Streamlined handling and compatibility for workshop use Engineered with a shank Ø 12 mm, the tap fits standard tap holders and wrenches for swift tool changes and secure clamping. Its design supports both through and blind holes, so stock can be kept lean while covering a broad range of threading tasks. The finishing nature of the tool minimises cleanup and inspection time, which contributes to faster cycle times and a more predictable production flow for maintenance teams, small toolrooms and industrial workshops. Contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich — secure the TECWERK MF16×1.5 finishing tap and confirm compatibility with specific material grades Technical data Article number: 2000867087NW Item: Hand finishing tap MF16×1.5 HSS ISO2 (6H) Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: MF16×1.5 Standard: DIN 2181 / DIN 13 Tolerance field: ISO2 (6H) Shank diameter: 12 mm Suitable for steels up to approx. 900 N/mm² Special features Cutting material: HSS Right-hand cutting For through and blind holes Finishing tap (Fertigschneider) For metric fine threads (MF) FAQ What thread form does the tap produce? The tap cuts an MF16×1.5 metric fine thread to the ISO2 (6H) tolerance as specified for metric fine-thread fits. What material is the tool made from? The tool is manufactured from HSS, offering a combination of toughness and wear resistance suitable for workshop use. Is the tap suitable for blind hole threading? Yes, the TECWERK hand finishing tap is specified for both through and blind holes and is designed to finish threads in either application. What clamping size is required for this tap? The tap features a shank Ø 12 mm, compatible with standard tap holders and wrenches used in typical workshops. Which steels can be machined with this tap? The tap is rated for steels with tensile strength up to approx. 900 N/mm²; selection for specific alloys should consider hardness and machining conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of robust HSS cutting geometry and precise ISO2 (6H) tolerance to produce consistent metric fine threads with minimal rework — the two-stage design and 12 mm shank ensure reliable handling and long service life. Order directly via Metav Werkzeuge or consult the team for application advice. Hand tap set DIN 2181 MF 16 x 1.5 HSS ISO2 (6H) — 2-piece manual tapping set (TECWERK) Hand tap set DIN 2181 MF 16 x 1.5 HSS ISO2 (6H) — 2-piece manual tapping set (TECWERK) is a compact two-stage tapping solution for cutting metric fine threads in through and blind holes in medium-strength steels. HSS material for high wear resistance ISO metric fine thread MF 16 x 1.5 Includes rough and finish tap 12 mm shank for secure holding Consistent fit through certified tolerance and fine-thread standard The Hand tap set DIN 2181 MF 16 x 1.5 delivers threads to the ISO2 (6H) tolerance, which is suited to assemblies where a precise clearance fit is required. Manufactured to DIN 2181 and matching the MF 16 x 1.5 metric fine-thread profile, the set is targeted at components where repeatable dimensional accuracy reduces need for later rework. Because the taps are rated for steel up to 900 N/mm², the resulting threads maintain mechanical integrity under typical workshop loads, helping to ensure consistent assembly behaviour and predictable torque values. Faster cycles and improved chip control with two-stage cutting The combination of rough and finish taps in one set separates material removal from the final form-cut, which shortens cycle times and reduces cutting forces on the finishing pass. The design supports efficient chip evacuation, lowering the risk of chip packing in blind holes and promoting longer tool life. The taps are right-hand cutting and suitable for both through and blind holes, so they can be applied across maintenance and small-series production tasks without the need for multiple tool types. Durable high-speed steel construction for workshop use Constructed from HSS, the cutting edges offer good wear resistance and are generally amenable to resharpening where workshop conditions permit. High-speed steel provides a balance of toughness and hardness that is appropriate for handheld and machine-assisted tapping in typical engineering workshops. The 12 mm shank facilitates secure clamping in standard tap holders and chucks, ensuring stable engagement and reduced wobble during manual or machine tapping operations. Versatile for maintenance, toolroom and production environments This tapping pair is well suited to repair work, prototype builds and light production use where metric fine threads are required. Compatibility with common tooling interfaces and the focus on quality tolerances make the set suitable for toolrooms and maintenance departments that prioritise repeatability. The compact set format reduces tool inventory while maintaining the ability to produce precision threads reliably on a variety of steel components. For dependable metric fine-thread production trust TECWERK's precision tap set — contact Metav Werkzeuge for tailored advice and swift supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000867063NW Description: Hand tap set DIN 2181 MF 16 x 1.5 HSS ISO2 (6H) 2-piece Manufacturer: TECWERK Internal ID: 2000867063NW Data Thread size: MF 16 x 1.5 Thread standard: DIN 13 Tolerance: ISO2 (6H) Pieces: 2 Shank diameter: 12 mm Suitable for steels up to 900 N/mm² Special features High-speed steel (HSS) cutting material Right-hand cutting For through and blind holes Consists of rough and finish tap FAQ What materials is this tap set suitable for? The TECWERK hand tap set is intended for metric fine threads in medium-strength steel up to 900 N/mm², using HSS cutting material for durability. Can the set be used in blind holes? Yes, the two-stage design supports both through and blind holes; the rough tap clears material while the finish tap forms the final thread profile for a clean result. What does the ISO2 (6H) tolerance mean in practice? ISO2 (6H) is a common tolerance class that specifies a consistent internal thread tolerance for metric fittings, ensuring predictable fit and performance in assembled components. Is the shank compatible with standard holders and chucks? The 12 mm shank provides secure clamping in typical tap holders and machine chucks, enabling use in both hand-operated and machine-assisted tapping setups. Does the set include different cutting stages? Yes, the package comprises a roughing (pre) tap and a finishing tap, which together reduce cutting forces and improve surface finish of the thread. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a hardened HSS construction combined with an ISO2 (6H) tolerance to produce consistent, serviceable fine threads; order directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Hand Tap DIN 2181, Finish Tap No. 2 – M20 x 1.5 HSS, ISO2 (6H) | TECWERK A Hand Tap DIN 2181 engineered for metric fine threads, suitable for through and blind holes and steels up to approximately 900 N/mm². HSS construction for durability ISO fine thread M20 × 1.5, tolerance ISO2 Suitable for through and blind holes Compatible with steels up to 900 N/mm² 16 mm shank for secure clamping Consistent fine threads with industrial tolerances The finish tap is designed to produce M20 x 1.5 metric fine threads to the DIN 13 specification, delivering the dimensional reliability required in production and repair work. The ISO2 (6H) tolerance class ensures that internal threads meet common assembly requirements for medium-fit applications; this reduces rework and minimises rejected parts. Where traceable, repeatable thread form is essential, the combination of finish geometry and standard-compliant tolerance gives a deterministic outcome that supports downstream assembly processes. Robust material and cutting behaviour for demanding steels Manufactured from HSS, the tool offers a balance between toughness and wear resistance suited to conventional workshop environments. The geometry is right-hand cutting and intended for both through and blind holes, enabling versatile use across component types. The tool is rated for steels up to about 900 N/mm² tensile strength, which covers many structural and engineering grades; this capability reduces the number of specialised taps needed in a mixed-material shop and streamlines tool inventory. Workshop-ready design that speeds set-up and handling A 16 mm shank diameter provides a secure interface with standard chucks and tap holders, improving concentricity and reducing run-out during manual or powered tapping operations. The designation as a finish tap (Fertigschneider) indicates a geometry optimised for producing the final thread form after any initial sizing or intermediate passes; this shortens total cycle time by reducing the need for corrective passes. Clear labelling and standard dimensions also simplify tool selection and inventory management, helping maintain a steady production flow. For reliable fine-thread tapping with TECWERK finish taps, contact Metav Werkzeuge for tailored advice or to place an order by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical Data Article number: 2000867089NW Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: M20 × 1.5 Shank diameter: 16 mm Material strength suitability: up to ≈ 900 N/mm² Tolerance class: ISO2 (6H) Special features Cutting material: HSS Metric ISO fine thread (MF) Standard: DIN 2181 / DIN 13 Right-hand cutting Suitable for through and blind holes Finish tap (Fertigschneider) No. 2 FAQ What materials can be machined with this tap? The TECWERK hand tap (SKU 2000867089NW) is made from HSS and specified for use on steels up to approximately 900 N/mm², making it suitable for many common engineering steels. Is this tool suitable for blind holes? Yes. The design supports both through and blind holes, and the finish geometry is intended to complete the thread form in the final pass. What does the tolerance ISO2 (6H) mean for assembly? The ISO2 (6H) tolerance provides a standard medium-fit internal thread suitable for reliable assembly without excessive play; the TECWERK finish tap produces threads that comply with this class for predictable mating behaviour. Can the tap be used in a powered tapping holder? The 16 mm shank allows secure mounting in standard holders and chucks; however, matching the holder to the machining method and ensuring correct alignment are essential for best results with this finishing tap. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of robust HSS construction, ISO2 (6H) tolerance and a practical two‑tap arrangement for reliable, repeatable fine-thread production; order the set directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. Hand tap set DIN 2181 MF20x1.5mm HSS ISO2 (6H), 2-piece – TECWERK A Hand tap set DIN 2181 MF20x1.5mm HSS ISO2 (6H) designed for cutting metric fine threads in industrial steel applications, suitable for both through and blind holes. HSS material for high wear resistance Metric MF20x1.5 thread, ISO fine pitch ISO2 (6H) tolerance for precise fit Includes roughing and finishing taps Consistent fine‑thread accuracy for secure assemblies The set, specified as MF20x1.5 with ISO2 (6H) tolerance and manufactured to DIN 2181, enables consistent production of fine threads that meet interchangeability expectations in assemblies. Compliance with the stated tolerance band reduces the need for rework and ensures predictable engagement with mating parts. Where thread accuracy determines whether components mate without play, this toolset provides the measurable basis for reliable results. Durable cutting performance and simple handling Made from HSS, the taps tolerate workshop conditions and are suitable for machining steels up to 900 N/mm², delivering a balance of hardness and toughness for extended service life. The shank Ø16 mm fits common tap wrenches and holders, simplifying set‑up. The two‑piece configuration—roughing tap followed by finishing tap—speeds material removal while producing a clean, dimensionally accurate thread, which saves cycle time and reduces finishing operations. Practical advantages for everyday workshop use Designed for both through and blind holes, the pair of taps covers typical maintenance and production tasks without complex tooling changes. The right‑hand cutting geometry suits standard machining directions and the HSS cutting material can be reground when required, offering economical life‑cycle management. For technicians and maintenance staff, the toolset combines predictable performance with straightforward handling to keep jobs moving and inventories lean. Contact Metav Werkzeuge in Emmerich for tailored advice on the TECWERK tap set and to discuss technical requirements via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867065NW Label: Hand tap set DIN 2181 MF20x1.5mm HSS ISO2 (6H) 2-piece TECWERK Manufacturer: TECWERK Core specifications Thread: MF20x1.5 Tolerance: ISO2 (6H) Material: HSS Shank diameter: 16 mm Set: 2‑piece Suitable for steels up to: ca. 900 N/mm² Special features DIN 2181 standard Right‑hand cutting For through and blind holes Includes roughing and finishing taps FAQ Which materials can be machined with this tap set? The TECWERK hand tap set is intended primarily for steels up to ca. 900 N/mm²; the HSS cutting material provides the hardness and toughness required for those grades. Does the set include both a roughing and a finishing tap? Yes, the two‑piece configuration consists of a roughing (pre) tap and a finishing tap to combine efficient material removal with precise thread form. Is the thread tolerance suitable for standard assemblies? The ISO2 (6H) tolerance specified for the set ensures a close, reproducible fit for metric fine‑thread applications and is appropriate where precise engagement is required. What does DIN 2181 signify for this product? DIN 2181 denotes the standard dimensions and form for hand taps, ensuring compatibility with established thread gauges and tap holders when using the TECWERK set. Can the taps be used in blind holes as well as through holes? Yes, the tool geometry is suitable for both through and blind holes, enabling flexible use across typical workshop tasks. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

A compact, standards‑compliant kit that pairs HSS durability with DIN 352 geometry to deliver reliable metric threading from M3–M12; the 21‑piece layout supports both through and blind holes and is available via Metav Werkzeuge for straightforward procurement and technical guidance. Ruko Hand tap set DIN 352 M3–M12 — 21‑piece HSS taps A Ruko Hand tap set DIN 352 M3–M12 engineered for manual metric threading in common workshop materials including steels, cast irons and non‑ferrous metals. High-performance HSS taps DIN 352 standard geometry Metric ISO threads M3–M12 For through and blind holes Reliable threads with production‑grade geometry The set is built around HSS cutting material and the DIN 352 profile to ensure consistent thread form and long tool life under manual use. This combination reduces the likelihood of thread distortion and wear, which translates into fewer scrapped components and less rework. The standardised geometry also simplifies quality assurance: thread gauges and M‑class fittings mate predictably, making integration into existing inspection routines straightforward. Suitable for common engineering materials and moderate tensile strengths Designed for applications in unalloyed and low‑alloy steels up to 800 N/mm², the taps also machine temper cast iron and a range of non‑ferrous metals without specialised tooling. Specifying the allowable tensile strength provides an objective basis for tool selection: users can assess whether the kit fits their workpiece material rather than relying on vague claims. The result is a measurable reduction in trial‑and‑error and a clearer route to dependable production outcomes. Practical layout for manual tapping operations The 21‑piece composition covers the standard metric progression from M3–M12, permitting one‑stop access to everyday thread sizes. Organisation in a compact set accelerates size selection and reduces setup time at the bench. For through and blind holes, the tool geometry and flute design support efficient chip evacuation when combined with appropriate lubrication; this preserves cutting edges and maintains surface finish. Basic procedural advice—correct alignment, steady feed and suitable cutting fluid—will extend service life and improve repeatability. Purchase confidence with a trusted partner Choosing this Ruko kit via Metav Werkzeuge combines product quality with supply reliability. Metav’s catalogue and logistics philosophy aim to make precision measuring and tooling accessible to workshops, backed by decades of distribution experience. The partnership reduces supplier complexity and offers a central point for additional tooling and metrology needs, contributing to uninterrupted workshop throughput and predictable procurement. Select the Ruko hand tap set through Metav Werkzeuge for workshop‑grade manual threading; contact Metav Werkzeuge in Emmerich for procurement or technical clarification by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 8000422357NW Label: Hand tap set DIN 352 M3–M12 21‑piece HSS RUKO Manufacturer: Ruko GmbH Präzisionswerkzeuge Facts Sizes: M3, M4, M5, M6, M8, M10, M12 Piece count: 21‑piece Strength suitability: up to 800 N/mm² Special features Cutting material: HSS Standard: DIN 352 Thread type: metric ISO threads Applications: through holes and blind holes Materials: unalloyed and low‑alloy steels, temper cast iron, non‑ferrous metals Packaging unit: 1 FAQ What thread sizes are included in the kit? The set contains taps for M3, M4, M5, M6, M8, M10 and M12, arranged across a 21‑piece kit. Can the taps be used for blind holes? Yes, the geometry supports both through and blind holes when used with correct feed and lubrication. Which materials are suitable for these taps? The taps are intended for unalloyed and low‑alloy steels up to 800 N/mm², temper cast iron and a variety of non‑ferrous metals as stated for the Ruko hand tap set. Is the geometry compatible with inspection gauges and standard fasteners? The DIN 352 profile and metric ISO threads ensure predictable mating with standard gauges and fittings. How is the set supplied and identified? The kit is supplied as a single packaging unit and is listed under article number 8000422357NW. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen

Take advantage of precise, standard-compliant thread production combined with durable HSS construction and a robust 18 mm shank for reliable manual tapping operations; order the set via Metav Werkzeuge or consult the team for application advice. Hand tap set DIN 2181 MF 22 x 1.5 mm HSS ISO2 (6H) — TECWERK Hand tap set DIN 2181 MF 22 x 1.5 mm HSS ISO2 (6H) designed for cutting fine metric threads in standard workshop and industrial steels HSS solid high-speed steel construction Metric fine thread MF 22 x 1.5 mm ISO2 (6H) Includes pre- and finish tap for precise threads Suitable for steels up to 900 N/mm² Accurate, standard-compliant fine-thread cutting for production use The Hand tap set DIN 2181 MF 22 x 1.5 mm HSS ISO2 (6H) delivers consistent results where fine metric threads are required. Manufactured to recognised standards, the kit targets MF fine threads and adheres to the tolerance class ISO2 (6H), which ensures a reliable fit in components produced to DIN specifications. The use of HSS as the cutting material combines hardness with sufficient toughness for manual tapping tasks, reducing the risk of premature tool failure when working within the specified material limits. The kit is suitable for both general workshop use and repetitive assembly tasks where repeatable thread quality is essential. Two-stage thread formation for reduced breakage and higher accuracy The two-piece configuration — a pre-tap followed by a finish tap — is engineered to split chip formation into distinct steps, which lowers cutting forces and extends tool life. The pre-tap removes the bulk of the material and establishes the thread lead, while the finish tap achieves the final tolerance and surface finish. This sequence is particularly effective for through and blind holes, and the right-hand cutting geometry ensures compatibility with standard hand-tapping techniques and common threading fixtures. Reduced torque peaks during tapping translate into fewer broken taps and more predictable production outcomes. Workshop-ready dimensions and material compatibility for practical use A shank Ø 18 mm provides secure engagement in standard tap wrenches and holders, improving stability during manual operations. The set is specified for use in steels up to 900 N/mm², which covers a broad range of structural and engineering steels encountered in everyday mechanical work. The compliance with DIN 2181 and related thread standards simplifies documentation and quality control, facilitating integration into existing production processes. The compact, standardised format supports efficient storage and easy selection at the workplace, while the robust construction contributes to dependable performance across multiple tapping cycles. Contact Metav Werkzeuge for tailored application advice and secure the TECWERK hand tap set through their expert ordering service at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867066NW Item name: Hand tap set DIN 2181 MF 22 x 1.5 mm HSS ISO2 (6H) 2-piece Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: MF 22 x 1.5 mm Tolerance: ISO2 (6H) Shank diameter: 18 mm Material strength rating: up to approx. 900 N/mm² Set composition: 2 pieces (pre- and finish tap) Special features HSS cutting material Metric ISO fine thread (MF) DIN 13 compatibility Right-hand cutting For through and blind holes Designed according to DIN 2181 FAQ What materials can be tapped with this set? This TECWERK hand tap set is specified for steels up to approximately 900 N/mm²; the Hand tap set DIN 2181 MF 22 x 1.5 mm HSS ISO2 (6H) is optimised for standard engineering steels. Is the set suitable for blind holes? Yes. The two-piece configuration is intended for both through and blind holes, with the pre-tap easing chip evacuation before final sizing with the finish tap. What does ISO2 (6H) tolerance mean for the thread fit? ISO2 (6H) denotes a standard metric tolerance class that provides a reproducible fit and is suitable for general mechanical assemblies where standardised, reliable thread quality is required; the TECWERK set is manufactured to meet this class. Can these taps be used in power tapping machines? The set is designed as a hand tap set; while the HSS material is robust, the taps are optimised for manual tapping operations and secure use with a shank Ø 18 mm tap wrench rather than automated high-speed tapping equipment. Which standards does the set follow? Threads and dimensions follow DIN 2181 and related DIN/ISO metric fine thread standards; the product label specifies compliance with DIN 13 for metric threads. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

A precision finishing hand tap in HSS for M22 x 1.5 metric fine threads delivers consistent ISO2 (6H) tolerance and reliable performance in steels up to approximately 900 N/mm²; the robust 18 mm shank ensures stable manual handling. Order the tool directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Hand tap DIN 2181 – finishing tap No.2, M22 x 1.5 mm HSS ISO2 (6H) by TECWERK The Hand tap DIN 2181 finishing tap No.2 M22 x 1.5 mm HSS ISO2 (6H) TECWERK is a manual finishing tap designed for producing metric fine threads to ISO tolerance in steel components HSS cutting material for durability ISO2 (6H) tolerance for precise threads Suitable for through and blind holes For steels up to 900 N/mm² strength Accurate thread form for secure assemblies The finishing tap provides a precise M22 x 1.5 metric fine thread produced to ISO2 (6H) tolerance, which translates into reliable thread fit and repeatable assembly behaviour. This level of accuracy reduces play between mating parts and improves fatigue life where threaded connections are subject to dynamic loads. For engineers and skilled workshop operators, the defined tolerance class simplifies quality control and compatibility with standard ISO fasteners. Durable cutting performance for prolonged use Made from high-speed steel, the tool delivers consistent cutting action across multiple operations. The HSS cutting material offers a balance of hardness and toughness that resists wear while maintaining a sharp cutting edge, especially when tapping medium-strength steels. A solid 18 mm shank provides secure clamping in manual tap handles and reduces the risk of wobble, improving hole alignment and surface finish during tapping operations. Practical handling for through and blind holes Designed as a finishing/plug tap (No.2) in accordance with DIN 2181, this hand tap is suitable for both through and blind hole applications, enabling clean thread bottoms and reliable engagement. The right-hand cutting direction and the specified geometry support controlled chip formation when tapping steels up to around 900 N/mm² tensile strength. For manual production or maintenance tasks, the tool’s geometry facilitates safer, more predictable tapping cycles and helps avoid thread damage from poor chip evacuation. Streamlined procurement and workshop assurance Selecting a standardised finishing tap from a recognised supplier reduces procurement complexity and supports consistent output across teams. Metav Werkzeuge acts as a reliable distribution partner with wide availability and technical know-how, helping workshops stock tools that meet industrial specifications. Choosing this finishing tap contributes to steady production flows, fewer reworks and clear traceability in workshop documentation. For reliable M22 fine-thread production with proven HSS performance, contact Metav Werkzeuge to request the TECWERK finishing hand tap or obtain tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867090NW Label: Hand tap DIN 2181 finishing tap No.2 M22 x 1.5 mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Facts Thread: M22 x 1.5 Tolerance: ISO2 (6H) Material: HSS Shank diameter: 18 mm Standard: DIN 2181 / DIN 13 Cutting direction: right-hand Application: through and blind holes Max material strength: up to 900 N/mm² Special features Metric fine thread Finishing/plug tap No.2 For manual tapping Suitable for steel applications Robust shank for secure clamping FAQ What thread does this tap cut? The TECWERK hand tap cuts an M22 x 1.5 metric fine thread to ISO2 (6H) tolerance. Is the tool suitable for blind holes? Yes, the finishing tap is specified for both through and blind hole applications and is designed to form clean thread bottoms. What materials can be machined with this tap? The tool is made of HSS and is intended for use in steels up to approximately 900 N/mm² tensile strength; other materials are not explicitly specified in the data. What is the shank diameter and why does it matter? The shank diameter is 18 mm, which provides stable clamping in manual holders and helps maintain alignment during tapping. Which standard and tolerance class does the tap conform to? The tap conforms to DIN 2181 and references DIN 13 thread standards with ISO2 (6H) tolerance. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust HSS construction, metric M24 x 1.5 ISO fine thread and ISO2 tolerance for reliable thread accuracy in industrial applications; order directly via Metav Werkzeuge or consult the specialists for specification matching. Finishing hand tap No.2 — M24 x 1.5 HSS (ISO2, 6H) by TECWERK A finishing hand tap No.2 M24 x 1.5 designed for producing metric ISO fine threads to DIN standards, suitable for through and blind hole tapping in medium-strength steels. HSS construction for long tool life Metric ISO fine thread M24 x 1.5 Tolerance ISO2 (6H) for accurate fits Suitable for through and blind holes Precise thread geometry for consistent assembly results The DIN 2181 finishing tap delivers a defined thread form for assemblies that demand repeatable engagement and torque behaviour. Manufactured from HSS, the tool maintains cutting geometry through repeated cycles, while the ISO2 (6H) tolerance secures a consistent clearance fit with ISO-classified nuts and components. This combination reduces rework and helps maintain process quality when producing metric fine threads to M24 x 1.5 standards. Durable performance in common workshop steels Rated for use in steels up to approximately 900 N/mm², the tap is tailored for typical industrial and maintenance applications where a balance of toughness and wear resistance is required. The HSS material provides effective heat resistance during conventional cutting speeds, ensuring longer life compared with unalloyed carbon options. By selecting a tool matched to material strength, machining stability is improved and workpiece integrity is preserved. Stable clamping and straightforward machining workflow A shank Ø 18 mm affords secure clamping in standard tool holders and hand tap wrenches, promoting axial stability during tapping operations. The right-hand cutting geometry and finishing flute design support clean chip formation in both through and blind holes, reducing the chance of chip jamming and improving surface finish. For workshops aiming to streamline operations, the tap’s compatibility with metric ISO threads simplifies inventory and shortens setup time. For reliable metric fine-thread tapping, choose the TECWERK finishing hand tap and consult Metav Werkzeuge for delivery and application advice — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support from Emmerich Technical data Article number: 2000867091NW Label: Hand tap DIN 2181 finishing tap No.2 M24 x 1.5 HSS ISO2 (6H) TECWERK Brand: TECWERK Packaging unit: 1 UID: 2000867091NW Core measurements Thread size: M24 x 1.5 Shank diameter: 18 mm Material strength suitability: up to approx. 900 N/mm² Tolerance: ISO2 (6H) Tool type: finishing hand tap No.2 Design and special features Material: HSS Standard: DIN 2181 Right-hand cutting For through and blind holes Metric ISO fine thread (MF) FAQ What materials can be tapped with this finishing hand tap? The TECWERK finishing hand tap is specified for use in steels up to approximately 900 N/mm² tensile strength and is suitable for standard workshop steels within that range. Is the thread form compatible with standard ISO nuts and components? Yes, the tool produces a metric ISO fine thread M24 x 1.5 with ISO2 (6H) tolerance, which matches ISO-classified internal and external thread components. Can the tap be used for blind holes as well as through holes? The design permits tapping of both through and blind holes; appropriate pecking or chip clearing is recommended for blind-hole operations to avoid chip congestion. What clamping size is required for secure use? A shank diameter of 18 mm allows secure clamping in compatible tool holders and manual tap wrenches that accept an 18 mm shank. Does the tap have any surface coating specified? No coating is specified for this tool; the fundamental construction is HSS, chosen for its balance of toughness and heat resistance. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine proven HSS cutting performance with standard Whitworth pipe-thread compatibility and a robust 20 mm shank for dependable workshop threading; order the tool directly via Metav Werkzeuge or consult our advisors for additional technical details. Hand tap DIN 5157 No.2 G 3/4" x 14 HSS (ISO 228) – TECWERK A hand tap DIN 5157 No.2 G 3/4" x 14 HSS engineered for Whitworth pipe-threading to ISO 228, suitable for right‑hand threads in through and blind holes and for steels up to approx. 900 N/mm² tensile strength HSS high‑speed steel cutting edges Whitworth pipe thread to DIN ISO 228 Suitable for through and blind holes 20 mm shank for secure clamping Reliable cutting performance for consistent production results The TECWERK hand tap DIN 5157 No.2 is manufactured from HSS, delivering the hardness and toughness required for routine threading tasks in workshop environments. The tool’s geometry and material choice enable stable cutting behaviour and prolonged edge life when used within its specification for steels up to approx. 900 N/mm² tensile strength. This results in fewer tool changes and reduced process interruptions, supporting a smoother production flow and predictable throughput. Compatibility with Whitworth pipe systems simplifies assembly work Designed specifically for Whitworth pipe thread (G) in compliance with DIN ISO 228, the tap produces a 3/4" x 14 tpi thread that matches common pipe fittings and components. Conformity to these standards ensures interchangeability and reduces the risk of misfitting parts in plumbing, hydraulic and machine-installation applications. The right‑hand cutting direction and standard thread form make the tool straightforward to integrate into existing workshop procedures. Practical design that eases setup and improves clamping security A 20 mm shank provides a stable interface for chucks and tool holders, improving centring and minimising vibration during manual or light‑machine tapping. The solid shank diameter helps achieve consistent thread coaxiality and reduces the risk of breakage in demanding hand‑tapping operations. For maintenance teams and production technicians, this translates into faster setups and reliable repeatability across batches. Standards-based construction for dependable workshop use Complying with DIN 5157 No.2 and ISO 228 means the tool is compatible with established quality expectations and workshop norms. The tap is suitable for both through and blind holes, offering flexibility across repair and manufacturing tasks. Given its specification and robust HSS material, the tool is particularly well suited for routine mechanical workshops, service departments and industrial maintenance where standardised pipe threads are frequently required. Contact Metav Werkzeuge for expert purchase advice and to secure TECWERK hand taps for immediate workshop use; technical enquiries can be sent to info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 2000867146NW SKU: 2000867146NW Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 20 mm Thread form: G 3/4" x 14 tpi Material suitability: steels up to approx. 900 N/mm² Special features Material: HSS Standard: DIN 5157 No.2, ISO 228 Cutting direction: right‑hand cutting Application: for through and blind holes Thread type: Whitworth pipe thread (G) FAQ What thread does the tap cut? The TECWERK hand tap cuts a Whitworth pipe thread G 3/4" x 14 tpi in accordance with DIN ISO 228, suitable for standard pipe fittings. Is the tap suitable for hardened steels? This tap is designed for use in steels with a tensile strength of up to approx. 900 N/mm² and is not intended for high‑hardness or case‑hardened materials beyond that range. Can the tap be used in a tapping machine? The tool is primarily a hand tap but the 20 mm shank and robust HSS construction allow use in light tapping machines or holders that securely accept the shank diameter. What distinguishes DIN 5157 No.2 specification? The DIN 5157 No.2 designation describes the tap style and geometry suitable for general-purpose threading tasks, offering a balance between strength and chip evacuation for standard workshop use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS cutting material, precise BSPP G 3/4 thread to ISO 228, and a two-piece design that ensures fast start-up and accurate finish threading in steels up to ≈900 N/mm²; order the set directly via Metav Werkzeuge or consult our advisors for technical guidance. TECWERK Hand tap set G 3/4 HSS ISO 228 (2-piece) The TECWERK hand tap set G 3/4 is a two-piece tapping solution for producing BSP parallel (G) threads to ISO 228 in through and blind holes, optimised for workshop and maintenance environments. HSS construction for long tool life BSPP G 3/4 threads to ISO 228 Two-piece set: starter and finishing tap Suitable for steels up to approx. 900 N/mm² Reliable BSPP threads for consistent assembly performance The two-piece tap set is designed to produce repeatable, standard-compliant BSPP (G) threads to ISO 228, combining a starter and a finishing cutter for reliable thread form and fit. The initial cutter eases entry and centres the tool, while the finishing cutter restores full profile and tolerance, reducing rework and ensuring swift assembly of pipe connections. This approach improves throughput in repair and small-batch production where consistent sealing surfaces and thread accuracy are essential. Workshop-ready design for efficient manual tapping Constructed from HSS, the set withstands typical workshop stresses and maintains sharp cutting edges longer than standard carbon tools. The 20 mm shank provides stable clamping in ordinary tap handles or adaptors, and the right-hand cutting geometry matches conventional machining practise. For users less familiar with tapping terminology: the starter tap creates a controlled lead-in, the finishing tap completes the thread profile to specification — together they reduce the risk of cross-threading and minimise the need for corrective machining. Broad material compatibility and straightforward application Suitable for use in steels with tensile strengths of up to ≈900 N/mm², this set handles common maintenance and fabrication tasks without specialised equipment. It is engineered for both through and blind holes, with a thread pitch of 14 tpi appropriate for G 3/4 applications. The conformity to DIN 5157 and ISO 228 standards means the resulting threads are compatible with standard pipe fittings and sealing solutions, facilitating reliable joint assembly and leak-free connections in hydraulic and pneumatic systems. Discuss suitability with Metav Werkzeuge today: contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply Technical data Article number: 2000867096NW Label: Hand tap set DIN 5157 G 3/4 HSS ISO 228 2-piece Manufacturer: TECWERK UID: 2000867096NW Facts Shank diameter: 20 mm Threads per inch: 14 tpi Set size: 2-piece Material strength suitability: up to approx. 900 N/mm² Special features Material: HSS Thread type: BSP parallel (G) to ISO 228 / DIN 5157 Right-hand cutting For through and blind holes Includes starter and finishing tap FAQ What thread standard does this set produce? The TECWERK hand tap set produces BSP parallel (G) threads to ISO 228 (DIN 5157), suitable for standard pipe fittings. Is the set suitable for blind holes? Yes, the two-piece configuration is specified for both through and blind holes and includes a starter and a finishing tap for complete profile formation. What materials can be machined with these taps? These HSS taps are intended for steels up to approximately 900 N/mm² tensile strength; the set performs well in typical workshop steel applications. How many pieces are included and what is the shank size? The delivery comprises a two-piece set (starter and finishing tap) with a 20 mm shank diameter for stable clamping. What is the thread pitch and how does it relate to pipe fittings? The set cuts G 3/4 threads with 14 tpi, matching the standard pitch for BSPP G 3/4 pipe connections. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

The combination of HSS construction, a 12 mm shank and compatibility with Whitworth pipe thread G 3/8 in (19 tpi) ensures robust, repeatable thread cutting in workshop environments; order the TECWERK hand tap set directly via Metav Werkzeuge or consult their specialists for application advice. Hand tap set DIN 5157 G 3/8 in HSS ISO 228 — TECWERK — right-hand cutting, 19 tpi Hand tap set DIN 5157 G 3/8 in HSS ISO 228 — TECWERK provides a compact solution for creating parallel Whitworth pipe threads to ISO 228 in a variety of steel grades and typical workshop materials HSS material for long tool life Whitworth pipe thread G (parallel) Suitable for through and blind holes 19 tpi for G 3/8" standard Reliable performance for workshop threading These HSS hand taps deliver consistent cutting performance where standard pipe threads are required. Designed to create Whitworth pipe thread G profiles to ISO 228, the set comprises a pilot and a finish cutter for staged cutting, which reduces load on the operator and the machine. The two-stage approach minimises the risk of chatter and deformation and is particularly useful when machining carbon and alloy steels. The right-hand cutting geometry promotes reliable chip formation and evacuation, so thread quality is improved without extra rework. Practical compatibility and machining guidance The cutter duo is specified for steels up to approx. 900 N/mm², making the set suitable for many common workshop steels. The taps are matched to G 3/8 in nominal size with 19 tpi, which complies with the Whitworth parallel pipe-thread standard; this ensures interchangeability with standard fittings. For blind holes, reduced cutting depth techniques and appropriate lubricant selection help prevent chip packing. For through holes, the finish cutter normalises thread flank geometry, ensuring a better sealing surface where required. Design features that support daily use A 12 mm shank provides secure clamping in conventional tap holders and T‑handles, while the HSS substrate delivers wear resistance across repeated cycles. The set’s right-hand cutting direction suits standard turning and drilling setups. Where higher production demands exist, the staged tapping reduces cycle times by lowering the cutting forces on the finish pass; this is a practical efficiency advantage in both maintenance and small-batch production contexts. Why choose this set via Metav Werkzeuge Selecting this TECWERK set through Metav Werkzeuge offers the advantages of a tested supply chain and specialist advice. Metav’s emphasis on precision democratisation, a broad catalogue and dependable logistics supports small workshops and industry buyers alike. With established quality controls and a large customer base, Metav ensures access to consistent tooling and can advise on lubricant choice, tapping speed and fixture recommendations. For tailored ordering or application advice on the TECWERK HSS G 3/8 in hand tap set, contact Metav Werkzeuge’s specialists for immediate procurement and technical guidance. Technical data Article number: 2000867094NW Manufacturer: TECWERK Designation: Hand tap set G 3/8 in HSS DIN 5157 ISO 228 Facts Shank diameter: 12 mm Thread standard: ISO 228 (Whitworth, parallel G) Thread size: G 3/8 in Threads per inch: 19 tpi Material strength suitability: up to approx. 900 N/mm² Set composition: 2-piece (pilot and finish) Special features Cutting material: HSS Cutting direction: right-hand cutting Application: through holes and blind holes Standard: DIN 5157 FAQ What materials can be machined with this hand tap set? The TECWERK hand tap set is suitable for machining common workshop steels up to approximately 900 N/mm²; the HSS construction supports durable cutting in carbon and many alloyed steels. Does the set include both a pilot and a finishing tap? Yes, the set consists of two taps — a starter (pilot) and a finish cutter — to stage the thread cutting and improve surface quality. Which thread standard and size does this set produce? The taps are produced to ISO 228 for Whitworth parallel pipe threads, nominally G 3/8 in with 19 tpi, matching standard G-thread fittings. Can the taps be used in blind holes as well as through holes? The TECWERK set is designed for both through and blind hole applications; using suitable lubrication and correct tapping depth improves performance in blind holes. What clamping or holder size is recommended? A 12 mm shank enables secure clamping in standard tap holders and conventional T‑handles suitable for manual or low-speed machine tapping. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of durable HSS cutting, DIN 352 standardisation and precise ISO2 (6H) thread fit to ensure reliable M3 connections in production and maintenance. Order the TECWERK hand tap directly via Metav Werkzeuge or contact the consultants for stock and technical guidance. Hand tap DIN 352 No.3 M3×0.5 HSS ISO2 (6H) – TECWERK A Hand tap DIN 352 No.3 M3×0.5 HSS ISO2 (6H) TECWERK for cutting metric M3 threads in steels up to approx. 900 N/mm² High-speed steel (HSS) for durable cutting DIN 352 standard, right-hand cut ISO2 (6H) tolerance for precision threads Suitable for steels up to ~900 N/mm² Consistent thread fit for dependable assemblies The Hand tap DIN 352 No.3 M3×0.5 HSS ISO2 (6H) is designed to deliver a consistent thread fit across batches, thanks to the ISO2 (6H) tolerance class. This tolerance ensures the resulting M3 thread conforms to metric ISO dimensions, reducing variability between mating parts and simplifying assembly processes. For engineering teams and quality managers, that predictability translates into fewer reworks and improved interchangeability of fastened components. Robust cutting performance for workshop use Made from HSS, the tool combines toughness with wear resistance for repetitive tapping operations. The right-hand cutting geometry, as specified by the standard, is suitable for conventional tapping motions and typical machine or hand-held tapping systems. Its construction supports machining in steels with strengths of up to approx. 900 N/mm², offering a reliable option for maintenance, prototyping and small-series production where a hard-wearing cutting edge is required. Standards-based design eases tool selection and inventory Conformance with DIN 352 and the reference to DIN 13 Blatt 1 means the tap follows established German workshop standards for form and function, facilitating compatibility with standard tap holders and handling tools. Standardisation reduces the number of special items to stock and makes tool replacement straightforward for maintenance crews and toolroom managers, streamlining procurement and logistics. Predictable handling and reduced downtime With a shaft Ø 3.5 mm the tap can be secured reliably in standard tapping handles and holders, improving concentricity and control during use. The combination of standard geometry and robust material reduces the likelihood of unexpected tool wear, contributing to more predictable maintenance intervals and lower scrap rates. For operations focused on efficiency, that predictability supports continuous workflow and lower total production costs. For specification checks, availability or tailored advice on TECWERK taps, contact Metav Werkzeuge—our specialists in precision tools can advise on compatibility and supply; eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 2000867170NW Description: Hand tap DIN 352 No.3 M3x0.5 HSS ISO2 (6H) TECWERK Packaging unit: 1 Facts Thread: M3 x 0.5 mm Shaft diameter: 3.5 mm For steels up to approx. 900 N/mm² Tolerance field: ISO2 (6H) Special features Material: HSS Standard: DIN 352; reference DIN 13 Blatt 1 Right-hand cutting Metric ISO thread FAQ Which thread size and pitch does this tap produce? The tap produces a metric M3 x 0.5 thread; the specification is stated in the product description and complies with metric ISO thread form. Is this tap suitable for hard materials? The tool is made of HSS and specified for use in steels with strengths up to approximately 900 N/mm²; harder or specially hardened materials are not covered by the stated rating. What standards does the tap adhere to? The tap conforms to DIN 352 and references DIN 13 Blatt 1, ensuring standard geometry and interchangeability with common workshop equipment. Is the cutting direction right-hand or left-hand? The cutting geometry is right-hand, as indicated in the technical data. What is the shaft diameter for clamping? The tool features a shaft Ø 3.5 mm, suitable for standard tapping handles and holders designed for that shank size. Manufacturer/Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund

Taking advantage of HSS construction and an ISO2 (6H) tolerance for the MF 6×0.75 thread delivers precise, repeatable results with minimal rework; order directly via Metav Werkzeuge or consult our advisors for technical guidance and fast supply from Emmerich. TECWERK Hand Tap MF 6×0.75 HSS ISO2 (6H) – DIN 2181 No.2 Finished Tap The TECWERK Hand Tap MF 6×0.75 HSS ISO2 (6H) is a right-hand, finished hand tap for metric fine threads, engineered for both through and blind holes and for steels up to approximately 900 N/mm². HSS high-speed steel for long life Metric fine thread MF 6×0.75 ISO2 tolerance For through and blind holes in steel up to 900 N/mm² 6 mm shank, DIN 2181 hand tap design Consistent thread accuracy for precision assemblies The tap is built to deliver reliable, repeatable thread geometry for assemblies where fit and function matter. The MF 6×0.75 fine thread combined with ISO2 (6H) tolerance provides a close, controlled fit that reduces play and the likelihood of component failure. Using a finished tap eliminates additional sizing operations, so production flow is more consistent and inspection effort is reduced. This clarity in outcome supports efficient assembly lines and lowers rework rates. Robust material and design for repetitive use Made of HSS, this tap balances hardness and toughness for industrial workshop use. The high-speed steel cutting material endures repeated contact and higher temperatures better than standard carbon alternatives, which means longer tool life under cyclic load. The 6 mm shank and DIN 2181 form factor ensure stable clamping in standard holders, while the right-hand cutting geometry provides predictable chip formation. Together these characteristics support continuous operation with fewer tool changes and less downtime. Practical suitability and handling in workshop environments Designed for both through and blind holes, the tool performs well in common steel grades and is specified for materials up to 900 N/mm² tensile strength. For blind holes, controlled depth and correct use of cutting fluid reduce chip packing and extend tool life; for through holes, chip evacuation is straightforward. The finished cutting profile reduces the need for secondary operations, which saves setup time and simplifies inventory management. Where quick, accurate thread-making is required, this tap integrates smoothly into existing workflows. Integrating the tap into production and tool provisioning As a finished hand tap with standard dimensions, the component fits existing tap sets and holders, enabling rapid deployment across workstations. The compact specification facilitates stocking and tool control, and the combination of HSS construction with ISO2 tolerance makes it a pragmatic choice for small-batch and repeating production runs alike. Where traceability and consistency are priorities, the tool supports documented process steps and predictable outcomes, aiding quality assurance in metalworking operations. Contact Metav Werkzeuge for personalised technical advice or to source the TECWERK hand tap for immediate dispatch from Emmerich; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 2000867080NW Name: Hand tap MF 6×0.75 HSS ISO2 (6H) Brand: TECWERK Packaging unit: 1 Facts Thread: MF 6×0.75 Shank diameter: 6 mm Material: HSS Tolerance: ISO2 (6H) Applicable tensile strength: up to approx. 900 N/mm² Standard: DIN 2181 Type: No.2 finished tap Special features Right-hand cutting For through and blind holes Finished cut for accurate threads Suitable for hand tapping and standard holders Designed for metric fine threads FAQ What drill size is recommended for this MF 6×0.75 hand tap? For the TECWERK Hand Tap MF 6×0.75 HSS ISO2 (6H) the typical tap drill corresponds to the core diameter for MF fine threads; consult standard MF drill tables to match fit and tolerance requirements. Is the tap suitable for blind-hole tapping? Yes; the finished geometry and cutting characteristics of this TECWERK hand tap are intended for both through and blind holes, with attention to lubrication and chip control in blind operations. Which materials can be machined with this tap? The tool is specified for steels up to approximately 900 N/mm² tensile strength; the HSS material supports repetitive use in common workshop steels. What does ISO2 (6H) tolerance mean for the thread fit? The ISO2 (6H) tolerance denotes a close, standard metric internal thread fit that yields a reliable, consistent engagement suitable for precision assemblies. Can the tap be used in a tap holder or machine adaptor? The 6 mm shank and DIN 2181 dimensions allow clamping in common tap holders and adaptors, enabling secure use in manual and compatible power-assisted tapping fixtures. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS construction, DIN‑compliant precision and a workshop‑friendly shank diameter for reliable manual threading in steel components; order the part directly via Metav Werkzeuge or ask the consultants for application advice. Hand tap DIN 352 – M6 x 1 mm HSS ISO2 (6H) by TECWERK The Hand tap DIN 352 M6 x 1 mm HSS ISO2 is a right‑hand cutting metric tap designed for manual tapping of steel parts in maintenance, prototyping and small‑batch production. HSS high‑speed steel cutting material Metric M6 x 1 mm ISO thread Tolerance field ISO2 (6H) precision Consistent metric threads with industrial tolerances The tool is manufactured to DIN 352 and referenced against DIN 13 Blatt 1, ensuring metric M6 x 1 mm threads meet an industrial tolerance of ISO2 (6H). Such standardisation makes the tap suitable where interchangeability and repeatable assembly are required. The specification for workpiece strength—up to ~900 N/mm²—indicates suitability for a wide range of steels commonly found in workshops and light production environments, while the right‑hand cutting geometry supports conventional tapping sequences. Workshop durability and practical handling Made from HSS, the tap combines cutting edge hardness with resistance to abrasion for extended tool life under manual use. The shank Ø 6 mm provides a straightforward fit for collets and tap holders commonly used at bench level. The geometry is optimised for chip formation and evacuation during hand tapping, reducing the risk of breakage when used with recommended tapping lubricants and correct axial alignment. Maintenance is simplified by the possibility of regrinding in authorised tool shops, extending service life and lowering long‑term tooling costs. Application guidance and quality assurance Intended for hand tapping, the tool performs well in maintenance, general engineering and small production runs where controlled thread quality is required. The right‑hand cutting design and the DIN conformity mean produced threads are compatible with standard fasteners and gauges. Manufacturing from HSS and adherence to DIN standards serve as a clear quality signal: the component is suitable for reliable assembly operations and consistent part replacement in European workshop settings, supported by Metav’s quality control at the Emmerich location. Contact Metav Werkzeuge for stock status and technical guidance on the TECWERK hand tap (SKU 2000867153NW) at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to ensure the tap matches the application requirements Technical data Article number: 2000867153NW Name: Handgewindebohrer DIN 352 Nr.2 M6x1mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Shank diameter: 6 mm Thread: M6 x 1 mm Material strength: up to ~900 N/mm² Tolerance: ISO2 (6H) Special features High‑speed steel (HSS) DIN 352, DIN 13 Blatt 1 compliance Right‑hand cutting Metric ISO thread for hand tapping FAQ What materials can be tapped with this tool? The Hand tap DIN 352 M6 x 1 mm HSS ISO2 (6H) is specified for use in steels up to around 900 N/mm², making it suitable for a broad range of common workshop steels. Is the DIN conformity important for interchangeability? Yes. DIN 352 and DIN 13 Blatt 1 conformity ensures that threads produced with the TECWERK hand tap meet standard dimensions and tolerances for metric fasteners. Can the tap be used in a machine or only by hand? The tool is designed primarily for hand tapping; adaptation to machine tapping requires verification of spindle fit and appropriate speeds, but the shank Ø 6 mm suits common bench holders. How should chip evacuation be managed when using this tap? Use of appropriate tapping lubricant and periodic withdrawal to clear chips is recommended to reduce breakage risk when using the TECWERK hand tap. What does ISO2 (6H) tolerance mean for assembly? ISO2 (6H) denotes a medium tolerance suitable for standard fastener fits, providing a reliable fit with commonly available bolts and screws for consistent assembly. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a compact, high-performance HSS hand tap set for fine metric threads; the two-piece design combines roughing and finishing taps for reliable thread quality and compatibility with steels up to 900 N/mm²—order directly via Metav Werkzeuge or consult our team for advice. Hand tap set M6 x 0.75 mm (ISO2, HSS) — 2-piece by TECWERK A Hand tap set M6 x 0.75 mm designed for fine metric threads, suitable for through and blind holes in medium-strength steels and workshop environments. High-speed steel construction HSS Metric fine thread M6 x 0.75 mm ISO2 (6H) Two-piece set: roughing and finishing taps Consistent fine-thread performance for production use The two-piece set delivers a dependable workflow by separating the roughing and finishing operations. The initial tap removes material quickly while the finishing tap refines the profile to the ISO2 (6H) tolerance class, producing accurate threads with reduced rework. For machine shops and maintenance departments needing consistent repeatability, this approach improves cycle reliability and lowers scrap rates while preserving thread geometry for subsequent assembly. Built to handle through and blind holes in tougher steels Manufactured from HSS, the taps are specified for steels up to approximately 900 N/mm² tensile strength, making them suitable for a broad range of common workshop alloys. The geometry supports both through-hole and blind-hole tapping, keeping chip formation predictable and helping to avoid premature tool failure. The 6 mm shank ensures secure clamping in conventional tap holders, so the set integrates easily into existing tooling stocks. Practical handling that speeds workshop processes The compact two-piece format simplifies storage and selection: one starter (roughing) and one finishing tap reduce inventory while covering the complete thread-making task. Right-hand cutting and the standardised M6 x 0.75 mm thread form mean predictable engagement and straightforward manual or machine-assisted tapping. Clear material limits and standard shank dimensions ensure rapid task planning and make the set a pragmatic choice for everyday production and repair work. Trusted standards and traceable tooling for quality assurance Conformance to metric thread standards and a defined tolerance field supports inspection and interchangeability in assembly work. The set’s specification—HSS, ISO2 (6H) tolerance and compatibility with steel up to 900 N/mm²—helps maintain component reliability and supports quality management processes. For procurement teams seeking dependable, standards-compliant taps, this set offers a balance of practicality and traceability that aligns with workshop quality routines. For personalised technical advice or to secure supply of the TECWERK hand tap set M6 x 0.75 mm, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for immediate assistance and delivery options. Technical Data Article number: 2000867056NW Designation: Hand tap set M6 x 0.75 mm HSS ISO2 (6H) 2-piece TECWERK Manufacturer: TECWERK Facts Thread size: M6 x 0.75 mm Set pieces: 2 Shank diameter: 6 mm Material strength suitability: up to approx. 900 N/mm² Special features Material: HSS (high-speed steel) Tolerance: ISO2 (6H) Application: through and blind holes Cutting direction: right-hand cutting Set composition: roughing and finishing taps Standards referenced: DIN 13 / DIN 2181 FAQ What materials can be machined with this tap set? The TECWERK hand tap set is specified for steels up to about 900 N/mm² tensile strength and is suitable for typical workshop steel grades. Is the set suitable for blind holes as well as through holes? Yes, the two-piece set is designed for use in both through-hole and blind-hole tapping operations. What does ISO2 (6H) tolerance mean for thread fit? ISO2 (6H) indicates a standard internal thread tolerance that provides a reliable clearance and fit for typical metric fasteners in industrial assemblies. Can these taps be used in a machine or only by hand? The 6 mm shank allows secure clamping in manual tap handles and many machine tap holders; however, appropriate equipment and cutting parameters should be used. What is included in the two-piece set? The set comprises a roughing (starter) tap and a finishing tap to cover the material removal and thread finishing stages. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combine robust HSS construction with ISO2 tolerance to achieve reliable metric fine threads and consistent production results; the compact two-piece set delivers repeatable quality for both through and blind holes. Order the set directly via Metav Werkzeuge or contact their consultants for application advice. Hand tap set MF8x1mm HSS ISO2 (6H) – TECWERK two-piece hand tap set The Hand tap set MF8x1mm HSS ISO2 (6H) TECWERK provides a precise, two-step solution for cutting metric fine threads in steel components, suitable for both workshop and light industrial applications. HSS material for durability Metric fine thread MF8x1mm ISO2 (6H) tolerance for precision Two-piece set: pre and finish tap Precision threading for reliable assembly The set is designed for precise metric fine-thread cutting, specified as MF8x1mm and conforming to DIN 13, with a tolerance field ISO2 (6H). These standards ensure predictable thread fit and interchangeability in mechanical assemblies. For production environments where thread tolerance and repeatability matter, the defined tolerance class reduces rework and fitting issues, supporting predictable assembly times and fewer rejects. The technical designation indicates compatibility with standard fasteners and simplifies quality control during incoming inspection. Robust HSS construction for extended tool life Manufactured in HSS, the taps combine toughness and wear resistance for durable cutting performance. High-speed steel sustains sharper cutting edges under the moderate cutting speeds typical of hand tapping and small machine operations, and is suited to work on steels up to approx. 900 N/mm² tensile strength. Right-hand cutting geometry offers familiar handling characteristics for conventional machines and manual tapping, while the material choice minimises frequent tool changes, contributing to steady operation and lower lifecycle tooling costs. Two-stage tapping for consistent thread quality The kit includes a pre- and finish tap, enabling a controlled two-step process: the lead tap creates the initial profile and removes bulk material, while the finishing tap forms the final thread with full flank contact and the specified tolerance. This sequence reduces cutting forces, lowers the risk of tap breakage in blind holes and through holes, and produces cleaner threads with improved surface finish. For small-batch production or repair work, the method enhances first-pass yields and reduces the need for subsequent correction. Compact shank and workshop compatibility With a 6 mm shank, the tools fit standard holders and collets found in many bench drills and tapping attachments, enabling quick changeover and integration into existing workflows. The two-piece set is compact for convenient storage and is appropriate for craft workshops, maintenance departments and small subcontractors who require dependable metric fine threads without investing in specialised tapping machinery. The straightforward specification makes it easy for planners to match the tool to materials and process parameters. Request the TECWERK HSS two-piece tap set via Metav Werkzeuge to secure accurate metric fine-threading and expert application support—contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for order and technical guidance Technical data Article number: 2000867058NW Label: Handgewindebohrersatz DIN 2181 MF8x1mm HSS ISO2 (6H) 2tlg.TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: MF8x1mm Tolerance: ISO2 (6H) Shank Ø: 6 mm Pieces: 2 Material: HSS Suitable for steels up to approx. 900 N/mm² Special features DIN 13 compliance Right-hand cutting For through and blind holes Set consists of pre- and finish tap Shank diameter: 6 mm FAQ What materials can be machined with this tap set? The TECWERK hand tap set is intended for machining steels up to approximately 900 N/mm² tensile strength; the HSS cutting material provides suitability for common engineering steels. Is the set suitable for blind holes as well as through holes? Yes, the two-piece configuration supports both through and blind hole tapping, with the pre- and finish taps designed to reduce breakage risk in blind holes. What tolerance class does the set achieve? Threads produced meet the ISO2 (6H) tolerance field, offering accurate fits for standard metric fine-thread components. What size shank is supplied and is it compatible with standard holders? The taps have a 6 mm shank, compatible with common chucks and collets used in bench drills and tapping holders. What does the two-piece set contain exactly? The set comprises a lead/pre tap and a finishing tap to enable staged material removal and final thread formation for improved surface finish and dimensional control. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund