Take advantage of the combination of durable HSS cutting steel, a 16 mm shank for stable clamping and the BSP parallel G 1/2" × 14 thread form to ensure consistent pipe-thread production; order or request advice through Metav Werkzeuge for reliable supply and application support. TECWERK hand tap DIN 5157 No.2 G 1/2" × 14 HSS (BSPP, 16 mm shank) A TECWERK hand tap for cutting BSP parallel (G) pipe threads, intended for through and blind holes and optimised for steels up to approximately 900 N/mm². HSS cutting steel for durable performance BSPP G 1/2" × 14 thread per ISO 228 Suitable for through and blind holes 16 mm shank diameter for stable clamping Reliable thread creation with industrial efficiency The TECWERK hand tap DIN 5157 No.2 is designed for consistent, repeatable results in pipe-thread production. Manufactured from HSS, the tool retains edge integrity under moderate thermal and mechanical loads, which reduces the need for frequent regrinding and supports higher throughput. The combination of a parallel BSP (G) thread form compliant with ISO 228 and the 14 threads-per-inch pitch provides compatibility with standard fittings, while the right-hand geometry ensures conventional cutting behaviour and predictable chip evacuation for efficient manual or machine-assisted tapping. Stable clamping and clear material limits for process planning A robust 16 mm shank offers secure clamping in standard toolholders, diminishing vibration and improving concentricity during tapping operations. The cutting geometry is suited to steels with tensile strengths up to about 900 N/mm², which covers a wide range of structural and engineering steels; this classification helps planners select the tap where performance and tool life are optimised. Because the material and geometry are specified, decisions on cutting speeds and lubricants can be made with precision, resulting in fewer rejects and smoother production cycles. Standards-compliant design for versatile shop-floor use Conformance to DIN 5157 No.2 and the ISO 228 thread specification means the tool integrates seamlessly into existing production processes and inspection routines. The tap is designed for both through and blind holes, enabling flexibility across assemblies. The right-hand cutting action promotes controlled chip flow; when paired with appropriate cutting fluid and a correctly sized pilot hole, the result is a clean thread profile with minimal secondary finishing. Clear technical conformity reduces uncertainty during procurement and supports quality assurance documentation. Contact Metav Werkzeuge in Emmerich for tailored application advice and procurement of the TECWERK HSS hand tap with 16 mm shank (SKU 2000867107NW) to ensure the tool fits the intended process and materials. Technical Data Article number: 2000867107NW Label: Hand tap DIN 5157 No.2 G 1/2" × 14 HSS ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: G 1/2" × 14 tpi Shank diameter: 16 mm Material: HSS Suitable for steels up to approx. 900 N/mm² Special features Right-hand cutting For through and blind holes BSP parallel (G) to ISO 228 DIN 5157 No.2 FAQ What thread form does this tap produce? The tap cuts a BSP parallel thread (G) in the G 1/2" × 14 configuration in accordance with ISO 228; the thread form is suitable for standard parallel pipe fittings. Which materials are suitable for use with this tap? The tool is made of HSS and specified for use in steels up to approximately 900 N/mm² tensile strength; other materials are not listed in the product data. Can the tap be used for blind holes? Yes, the design supports both through and blind hole tapping operations without modification. What is the shank size and why does it matter? The shank diameter is 16 mm, which gives secure clamping in common holders and improves stability and concentricity during tapping. Does the product conform to any standards? The tap is specified as DIN 5157 No.2 and the thread form follows ISO 228 for BSP parallel (G) threads. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of robust HSS construction and ISO‑conformant Whitworth pipe threading for dependable on‑site preparation and reduced rework; the combination of a starter and finishing tap delivers consistent thread quality and efficient production — order or request consultancy via Metav Werkzeuge for tailored advice. Hand tap set DIN 5157 G 1/4" HSS ISO 228 — TECWERK, right‑hand cutting The Hand tap set DIN 5157 G 1/4" provides HSS taps for Whitworth pipe threads to ISO 228, suitable for through and blind holes and for steels up to approx. 900 N/mm² HSS cutting material for durability Whitworth pipe thread G to ISO 228 Right‑hand cutting for conventional machines Suitable for steels up to approx. 900 N/mm² Precise Whitworth threads for reliable pipe joints This tap set is designed specifically for producing Whitworth pipe threads to ISO 228, which ensures compatibility with standard fittings and avoids mismatched connections. Conformity to the standard means the produced threads meet expected dimensions and tolerances, reducing assembly time and the need for rework. For operations requiring dependable sealing and mechanical integrity, the set delivers repeatable results that integrate into existing production and maintenance procedures. Durable high‑speed steel for consistent performance Manufactured in HSS (high‑speed steel), the cutters combine toughness with heat resistance to withstand typical workshop stresses. The material choice helps maintain cutting geometry across multiple operations, extending tool life when working with medium‑strength steels — specified here up to approx. 900 N/mm². Because the taps are right‑hand cutting, they are compatible with standard tapping procedures and common tapping handles, enabling rapid changeover and predictable machining behaviour in everyday industrial use. Two‑step system for efficiency and reduced breakage The set comprises a starter tap (Vor‑schneider) and a finishing tap (Fertigschneider), a sequence that eases chip evacuation and reduces torque during thread generation. Using a tapered or starter cutter first produces a guiding thread, then the finishing cutter brings the thread to full dimensions and surface quality, improving thread accuracy and lowering the risk of tap breakage. This two‑step approach is particularly beneficial in blind‑hole applications and where consistent thread form is a production priority. Workshop compatibility and handling benefits With a shank diameter of 11 mm, the taps fit common tap handles and adapters used in professional shops, simplifying storage and tool selection. The set is suitable for both through and blind holes, offering flexibility across maintenance, plumbing and fabrication tasks. Clear labelling and ISO conformity make inventory control and procurement straightforward for purchasing departments that prioritise standardisation and traceability. For precise Whitworth pipe threading with TECWERK quality, contact Metav Werkzeuge for ordering and expert advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications. Technical Data Article number: 2000867093NW Name: Hand tap set DIN 5157 G 1/4" HSS ISO 228 Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 11 mm Material strength suitability: up to approx. 900 N/mm² Pieces: 2 Gg/1": 19 Special features HSS cutting material Whitworth pipe thread G to DIN ISO 228 Right‑hand cutting For through and blind holes Set includes starter and finishing tap FAQ What thread standard does this tap set follow? The set produces Whitworth pipe threads to ISO 228, ensuring compatibility with standard pipe fittings and connectors. Is the material suitable for hardened steels? The TECWERK hand tap set is specified for steels up to approx. 900 N/mm²; it is not intended for significantly hardened steels beyond that strength. Which pieces are included in the set? The package comprises a starter (pre‑cut) tap and a finishing tap designed to be used in sequence for improved thread accuracy. Can the taps be used in blind holes? Yes, the set is suitable for both through and blind holes, with the two‑step process helping to control chip formation and reduce the risk of tool breakage. What is the shank size and clamping compatibility? The taps feature a shank diameter of 11 mm, compatible with common tap handles and standard holders for handheld or machine tapping. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust, HSS-made tap that delivers precise Whitworth pipe threads and reliable durability for workshop and industrial use; the combination of DIN ISO 228 conformity and a secure 11 mm shank ensures consistent performance and easy machine or hand chucking. Order directly via Metav Werkzeuge or contact the consultants for application advice. Hand tap DIN 5157 No.2 G 1/4" x19 HSS ISO 228 — Hand tap, right‑hand cutting, TECWERK A compact Hand tap DIN 5157 Nr.2 G 1/4" x19 HSS ISO 228 TECWERK designed for forming Whitworth pipe threads in steel components and suitable for both through and blind holes. HSS construction for durable cutting performance Whitworth G pipe thread to DIN ISO 228 Shank Ø 11 mm for secure chucking Consistent pipe‑thread form for secure assemblies The tap produces the standard Whitworth G pipe thread in compliance with DIN ISO 228, guaranteeing compatible connections for fittings and valves. Its geometry is configured for right‑hand cutting and calibrated flank form, which reduces the need for trial fittings and supports predictable sealing behaviour. This translates into fewer rejects and faster assembly cycles, a direct productivity benefit for metal‑working shops and maintenance teams. Durable high‑speed steel for extended tool life Manufactured from HSS, the tool combines toughness and edge retention for repetitive thread cutting in ferrous materials. The high‑speed steel composition resists chipping under moderate feed and torque, meaning longer intervals between tool replacement. For work on steels up to approximately 900 N/mm², the tool maintains cutting integrity and reduces downtime associated with frequent tap changes. Designed for practical workshop use and versatile hole types With a shank diameter of 11 mm, the tap fits common hand‑tool chucks and small machine holders, providing secure mounting and straightforward handling. Engineered for both through and blind holes, it offers controlled chip formation so operators can manage extraction and avoid clogging in tight bores. The straightforward shank and standard thread form favour rapid changeover and simple storage in tool racks. Integration into production and procurement strategies Choosing this tap supports streamlined procurement: the standard G 1/4" x19 specification simplifies part selection across suppliers and maintenance schedules. The tool’s conformity to recognised standards assists quality assurance documentation and allows purchasing managers to forecast service life based on material and cycle figures. As an industrial partner, Metav promotes reliable supply from its Emmerich warehouse to maintain continuous workshop operation. For robust pipe‑threading performance from TECWERK, contact Metav Werkzeuge for ordering, technical clarification, or to discuss application suitability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867105NW Brand: TECWERK Designation: Hand tap DIN 5157 No.2 G 1/4" x19 HSS ISO 228 Packaging unit: 1 Facts Shank diameter: 11 mm Thread form: G 1/4" x19 (Whitworth pipe thread) Material: HSS Suitable for steels up to approx. 900 N/mm² Special features Conforms to DIN ISO 228 Right‑hand cutting For through and blind holes Gg/1": 19 FAQ What thread standard does this tap produce? The tap produces a Whitworth G pipe thread in accordance with DIN ISO 228, as specified for the TECWERK hand tap (SKU 2000867105NW). Which material is the tool made from? The tool is manufactured from HSS; the material choice supports durability and stable cutting when machining steel components. Is the tap suitable for blind holes? Yes, the tap is specified for both through and blind hole threading, offering controlled chip behaviour for confined bores. What is the shank size for mounting? The shank diameter is 11 mm, suitable for standard chucks and small machine tool holders commonly used in workshops. For which steel strengths is this tap recommended? The tap is recommended for use in steels up to approximately 900 N/mm² tensile strength. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable HSS construction and the two-step taper-and-finish arrangement for consistent Whitworth pipe threads in steels up to approximately 900 N/mm²; order the set directly via Metav Werkzeuge or contact the consultants for tailored advice. Hand thread tap set DIN 5157 G 1/8 (HSS, ISO 228) – 2-piece pipe tap set by TECWERK A Hand thread tap set DIN 5157 G 1/8 (HSS) designed for cutting Whitworth pipe threads to DIN ISO 228 in through and blind holes, suitable for general workshop and industrial maintenance. HSS material for durable cutting Whitworth pipe thread G to DIN ISO 228 Suitable for through and blind holes Designed for steels up to 900 N/mm² Reliable pipe connections through standardised Whitworth threads The set produces Whitworth pipe threads (G) in accordance with DIN ISO 228, ensuring compatibility with common pipe fittings and seals. Conforming to a recognised standard reduces mismatch risk and supports repeatable assembly processes, which is particularly relevant in workshop repair and industrial maintenance contexts. This standard conformity translates into fewer sealing issues and more predictable joint performance. Robust high-speed steel for extended service life Manufactured from HSS, the taps offer a balance between toughness and wear resistance that suits frequent hand‑tapping tasks. The HSS composition stands up to moderate abrasive loads and maintains cutting edge integrity longer than standard tool steels. For operations in steels up to about 900 N/mm², this material choice reduces the need for frequent replacement, lowering downtime and contributing to more economical shop-floor operation. Two-step design for precise thread form and reliable starts The set comprises a starter and finish tap, allowing controlled material removal and accurate thread geometry. The initial tap establishes the thread profile and clearance; the finishing tap refines the form and pitch, producing a tighter tolerance fit. This two-step approach minimises the risk of chatter and cross-threading in both through and blind holes, improving first-pass yield and reducing rework. Practical dimensions and cutting characteristics for workshop use A 7 mm shank provides compatibility with standard tap wrenches and holders, while the right-hand cutting action matches conventional thread direction for most applications. The specification of 28 threads per inch for the G 1/8 profile aligns with established Whitworth pipe thread pitches, simplifying selection and inventory management in stores that service plumbing, hydraulics and pneumatic assemblies. Clear benefits for procurement and maintenance teams Choosing this tap set supports efficient tooling strategies: the standard thread form reduces part interchange issues, the HSS construction extends tool life under typical workshop conditions, and the two-piece sequence improves thread quality on the first attempt. These aspects combine to lower operational disruption and simplify spare-part planning for maintenance departments. For reliable supply and specialist advice on the TECWERK pipe tap set, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or phone +49 2822 7131930 for ordering and technical clarification Technical Data Article number: 2000867092NW Product name: Hand thread tap set DIN 5157 G 1/8 HSS ISO 228 Manufacturer: TECWERK Facts Shank diameter: 7 mm Thread pitch: 28 tpi (G 1/8) Material strength suitability: up to approx. 900 N/mm² Special features Material: HSS Thread form: Whitworth pipe thread G to DIN ISO 228 Cutting direction: right-hand cutting Applications: through and blind holes Set composition: starter and finish tap (2-piece) FAQ What thread standard does this tap set produce? The set cuts Whitworth pipe threads (G) to DIN ISO 228, so components and fittings specified to that standard will be compatible with the produced threads. Can the set be used in blind holes? Yes. The two-piece arrangement includes a starter and a finish tap that together accommodate both through and blind holes while maintaining correct thread form. Which materials are suitable for these taps? The taps are made of HSS and are specified for use in steels up to approximately 900 N/mm², providing a good compromise between durability and toughness for general workshop steels. Is the shank compatible with standard tap wrenches? The set features a 7 mm shank, which fits common hand tap wrenches and holders used for manual tapping operations. What is included in the set and how does it improve results? The two-piece set contains a starter and a finish tap; using both in sequence improves thread accuracy, reduces the risk of cross-threading and yields a cleaner final thread. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a proven combination of HSS durability, precise Whitworth G thread form and a compact 7 mm shank to keep assembly work efficient and reliable; order the tool through Metav Werkzeuge or consult their specialists for application advice. Hand tap DIN 5157 No.2 G 1/8" x 28 HSS ISO 228 – TECWERK hand tap for parallel pipe threads The Hand tap DIN 5157 No.2 G 1/8" x 28 HSS ISO 228 is a manual cutting tool designed for producing Whitworth G (parallel) pipe threads to ISO 228 standards, suitable for both through and blind holes in workshop and industrial environments. HSS construction for extended tool life Whitworth G parallel pipe thread (ISO 228) Suitable for through and blind holes Shank Ø 7 mm, right-hand cutting Reliable thread form for secure pipe connections The Whitworth G thread specification (ISO 228) ensures a consistent, parallel pipe thread that matches standard fittings and sealing elements. The tool’s 28 tpi geometry and DIN 5157 No.2 designation provide predictable flank form and pitch, which translates into fewer leaks and faster assembly. For fabricators and maintenance teams the practical benefit is straightforward: repeatable threads that reduce rework and ensure compatibility with standard BSPP components. Robust HSS material for demanding steel applications Manufactured from HSS, the tap is engineered to withstand the stresses of cutting metal with higher tensile strengths. It is specified for steels up to approximately 900 N/mm², which covers a broad range of structural and engineering steels. The right-hand cutting geometry and solid high-speed steel construction contribute to longer tool life and consistent chip formation, reducing downtime for tool changes and improving process economy in serial production or repair work. Workshop-friendly design for manual and machine use A 7 mm shank diameter offers secure clamping in standard tap handles or suitable adaptors, while the tool’s suitability for both through and blind holes increases flexibility on the shop floor. The combination of compact shank, standardised thread form and HSS cutting material makes the item practical for maintenance crews, fitting workshops and light production lines where reliable pipe-thread creation is required without specialised machinery. For secure supply and practical advice on TECWERK taps, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm suitability and delivery options Technical Data Article number: 2000867104NW Label: Handgewindebohrer DIN 5157 Nr.2 G 1/8 Zollx28 HSS ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867104NW Core data Thread: G 1/8" (ISO 228) Threads per inch: 28 Shank diameter: 7 mm Material: HSS Cutting direction: right-hand Suitable for through and blind holes Max material strength: approx. 900 N/mm² Applications / Special features Whitworth parallel pipe thread G DIN 5157 No.2 specification Right-hand cutting Shank Ø 7 mm HSS cutting material For through and blind holes FAQ What thread standard does this tap produce? The TECWERK hand tap produces a Whitworth G parallel pipe thread to ISO 228 standards, specified as G 1/8" with 28 tpi. Can the tap be used in blind holes? Yes, the tool is designed for both through and blind holes, with flute geometry suited to controlled chip evacuation. Is this tap suitable for hardened steels? The tap is intended for steels up to approximately 900 N/mm²; it is not specified for pre-hardened or high-hardness steels beyond that value. Which shank size is required for clamping? Clamping requires a holder or tap wrench compatible with a 7 mm shank for secure retention during manual tapping. What material is the cutting tool made from? The cutting material is high-speed steel (HSS), offering a balance of toughness and wear resistance for general workshop use. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the robust combination of precision thread form, durable HSS cutting material and a secure 12 mm shank to ensure consistent pipe connections in production and maintenance tasks; order the item directly via Metav Werkzeuge or consult their specialists for application guidance. Hand tap G 3/8" x 19 tpi – HSS, DIN ISO 228 (TECWERK) The hand tap G 3/8" x 19 tpi is a tool for cutting Whitworth pipe threads to DIN ISO 228 standard, suitable for general workshop and industrial pipe‑fitting applications. HSS construction for durable cutting Whitworth pipe thread G 3/8″ × 19 tpi Right‑hand cutting for through and blind holes 12 mm shank diameter for secure clamping Consistent pipe-thread form for reliable connections The tap produces the Whitworth pipe thread defined by DIN ISO 228, delivering a standardised thread profile appropriate for many fluid and gas fittings. Manufactured from HSS, the tool maintains cutting geometry under the loads typical for pipe‑threading, which helps reduce rework and leak risks. The right‑hand cutting geometry supports both through and blind holes, providing predictable chip formation and thread quality in materials with tensile strengths up to 900 N/mm². Secure clamping and practical workshop handling A 12 mm shank enables stable clamping in hand tap wrenches or suitable collets, improving concentricity during manual tapping operations. The combination of a standardised shank and a conventional tap length makes the tool compatible with common workshop fixtures, reducing setup time. This physical compatibility, together with the tool’s straightforward geometry, supports a smoother workflow and lowers the probability of cross‑threading or tap breakage. Material compatibility and cutting performance Designed for machining steels up to approximately 900 N/mm², the tool’s HSS composition balances hardness and toughness for repeated use in mixed‑material environments. The specification indicates suitability for non‑hardened steels and typical workshop alloys; the robust cutting material helps the tap retain a sharp cutting edge longer than standard carbon steel alternatives, which benefits throughput and tool life. The thread pitch of G 3/8" × 19 tpi provides fine engagement suitable for many pipe assemblies where sealing integrity is essential. Integration into production and maintenance routines Incorporating a standardised, HSS hand tap from TECWERK into routine maintenance or production kits supports operational consistency across multiple workstations. The tap’s compatibility with both through and blind hole applications reduces the need for specialised variants and simplifies inventory. For procurement and supply chain reliability, the tool is supplied in single units and can be ordered to replenish workshop stocks or to standardise tooling across departments. Request an application consultation or a tailored supply proposal from Metav Werkzeuge for this TECWERK hand tap (SKU 2000867106NW) to ensure the tool matches the intended pipe‑threading tasks and material conditions; contact via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867106NW Label: Handgewindebohrer DIN 5157 Nr.2 G 3/8 Zollx19 HSS ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867106NW Core Measurements Thread: G 3/8" × 19 tpi Standard: DIN ISO 228 Shaft Ø: 12 mm Material suitability: steels up to ca. 900 N/mm² Materials & Features Cutting material: HSS Cutting direction: right‑hand cutting Application: for through and blind holes Thread type: Whitworth pipe thread (G) FAQ What thread form does the tap produce? The tap cuts a Whitworth pipe thread to DIN ISO 228, specified as G 3/8" × 19 tpi for the TECWERK hand tap (SKU 2000867106NW). Which materials can be machined with this tap? The tool is suitable for steels up to approximately 900 N/mm² tensile strength and comparable workshop alloys when using the recommended cutting conditions. Can the tap be used in blind holes? Yes, the right‑hand cutting geometry of the TECWERK hand tap is designed for both through and blind holes, offering controlled chip evacuation. What clamping or driving interface is required? A secure clamping method compatible with a 12 mm shank—such as a tap wrench or collet—is recommended to ensure concentricity and reduce breakage risk. Is the tap appropriate for production or occasional maintenance? The HSS construction and standard thread form make this tap suitable for both regular maintenance and light production tasks where standardised pipe threads are required. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a toolset that combines HSSG cutting material with a double-ended design and ISO2 (6H) tolerance for consistent, high-quality thread production; order the set directly via Metav Werkzeuge or consult the team for application advice. Hand tap set HexTap G1/8–1 in HSSG ISO2 (6H) by VÖLKEL The Hand tap set HexTap G1/8–1 in HSSG ISO2 (6H) offers a compact solution for cutting both metric ISO and Whitworth pipe threads in through and blind holes. HSSG high-speed steel for durable cutting Double-ended taps with plug and bottoming cutter ISO2 (6H) metric and G Whitworth pipe threads Suitable for through and blind holes Precision threads with industrial consistency The set is built around HSSG cutting material, offering a reliable balance between toughness and edge retention for serial and occasional thread cutting. The double-ended design with both a plug cutter and a bottoming cutter ensures that threads are formed cleanly from start to finish, reducing the need for rework. With the tolerance class ISO2 (6H) and compliance to recognised standards, this toolset supports reproducible results on parts where fit and interchangeability are critical. Fast setup and efficient machining for workshops Designed for manual operation, the hand taps provide efficient material removal without complex tooling changes, which shortens cycle times and simplifies workshop workflows. The combination of a lead-in flute and finishing geometry means fewer passes are required to achieve full form, so throughput is increased while maintaining thread profile integrity. The construction is especially well suited to operations where quick, dependable threading is needed without investing in dedicated tapping machines. Broad material compatibility minimises tool inventory This tapping range is suitable for many commonly machined steels and low-alloy materials up to approximately 900 N/mm² tensile strength, which covers most unalloyed and low-alloy steels encountered in general engineering. The set also supports Whitworth pipe thread forms (G) as well as metric ISO threads, making it a versatile choice for workshops that handle mixed specifications. Specifying one compact set reduces the number of separate tools required, simplifying stock management. Practical handling and maintenance for long service life The tool geometry and material choice provide a favourable balance between wear resistance and toughness, which helps extend service intervals. Correct use in adequately prepared holes—proper pilot dimensions and lubrication—ensures the taps reach their expected lifetime and deliver consistent thread quality. The double-ended format reduces handling time and keeps the necessary cutters close at hand, supporting a smooth workflow on the shop floor. For reliable delivery and tailored advice, contact Metav Werkzeuge GmbH in Emmerich — Metav’s consultants can confirm suitability for specific materials and applications and arrange supply quickly via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000867039NW Product: Hand tap set HexTap G1/8–1 in HSSG ISO2 (6H) VÖLKEL Manufacturer: VÖLKEL GmbH Packaging unit: 1 UID: 4000867039NW Key figures Thread range: G1/8–1 in Tensile strength capability: up to 900 N/mm² Tolerance: ISO2 (6H) Design & special features Material: HSSG (high-speed steel) Double-ended taps with plug and bottoming cutter Suitable for through and blind holes Metric ISO threads to DIN 13 Whitworth pipe threads G to DIN ISO 228 For unalloyed and low-alloy steels FAQ Which thread standards are covered by this set? The HexTap hand tap set covers metric ISO threads to DIN 13 with tolerance ISO2 (6H) and Whitworth pipe threads (G) to DIN ISO 228, allowing use across common industrial specifications. Is the set suitable for blind holes as well as through holes? Yes, the set is designed for both through and blind holes; the inclusion of a bottoming cutter allows complete thread formation at the base of blind holes. What materials can be machined with these taps? The taps are intended for unalloyed and low-alloy steels and other readily machinable materials up to about 900 N/mm² tensile strength; the HSSG cutting material offers good durability across these workpieces. How does the double-ended design benefit workshop efficiency? Having both a plug and a bottoming cutter in a compact format reduces tool changes and handling time, which streamlines tapping operations and lowers the chance of selection errors during production. Can this set be used for pipe fittings and mechanical components? Yes, the combination of G (Whitworth) pipe threads and metric ISO threads in the set makes it suitable for both pipework applications and mechanical threaded parts where those standards are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise ISO threading, robust HSS construction and a practical three-stage tapping process for reliable results in everyday workshop applications. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. Hand tap set DIN 352 M10 x1.5 HSS ISO2 (6H) – 3-piece right-hand metric taps by TECWERK Hand tap set DIN 352 M10 x1.5 HSS ISO2 (6H) is a compact solution for producing standard metric threads in workshop and industrial environments, engineered for steels with tensile strengths of approximately 900 N/mm² and suitable for both through and blind hole applications HSS construction for high wear resistance ISO2 (6H) tolerance for precise metric threads Suitable for through and blind hole threading Accurate ISO metric threads for consistent assembly The set complies with DIN 352 and is specified for M10 x1.5 metric threads in the common ISO2 (6H) tolerance class, which balances manufacturability and thread fit for general engineering applications. Using a tap set conforming to recognised standards ensures interchangeability of fasteners and reduces the risk of assembly issues. The defined tolerance field supports predictable allowance between bolt and thread, making the solution particularly suitable where repeatable accuracy and reduced rework are priorities. The named tap set delivers these benefits in a format intended for manual tapping workflows. Robust HSS construction and staged cutting for longer life Manufactured from HSS, the tools resist wear under intermittent and continuous use while maintaining cutting edge integrity. The three-piece composition—rough, intermediate and finishing cutters—permits a progressive material removal approach that lowers torque peaks and distributes cutting forces more evenly, which improves thread form and extends service life. The 7 mm shank allows accommodation in common tap handles and holders, ensuring straightforward mounting and firm retention during manual tapping operations. Right-hand cutting geometry matches standard thread direction for metric fastenings. Practical application guidance for dependable results Designed for use in steel up to 900 N/mm² tensile strength and adaptable to both through and blind holes, the set is optimised for workshop versatility. For best outcomes, combine correct tap sequence with appropriate cutting fluid and moderate hand feed to avoid chip congestion in blind holes. The compact shank diameter makes the tools compatible with standard manual tapping equipment and lightweight tap holders, promoting fast changeover and minimal downtime. This approach supports efficient production flow and dependable thread quality across a range of maintenance and fabrication tasks. Choose the TECWERK hand tap set for robust, standard-compliant threading and contact Metav Werkzeuge for order placement or tailored technical advice – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867116NW Item designation: Handgewindebohrersatz DIN 352 M10 x1,5mm HSS ISO2 (6H) 3tlg.TECWERK Manufacturer: TECWERK Facts Thread size: M10 x1.5 Shank diameter: 7 mm Standard: DIN 352 Material strength suitability: steels up to approx. 900 N/mm² Set composition: 3 pieces (rough, intermediate, finishing) Special features Material: HSS Tolerance class: ISO2 (6H) Cutting direction: right-hand Suitable for: through and blind holes Reference: DIN 13 Blatt 1 FAQ What sizes and pitch does the set cover? The set is specified for M10 x1.5 metric threads and includes the three-stage taps required to produce a full ISO thread to the ISO2 (6H) tolerance. Can the taps be used in blind holes? Yes, the design is suitable for through and blind holes; when tapping blind holes, progressive cutting and proper chip evacuation are recommended to avoid clogging. What material is recommended for machining with this set? The taps are manufactured from HSS and are suitable for steels up to approximately 900 N/mm² tensile strength. How does the three-piece configuration benefit thread quality? The sequence of rough, intermediate and finishing cutters reduces cutting forces per tap and improves final thread geometry, leading to more consistent results and extended tool life. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of precise metric threading, robust HSS cutting material and a compact 7 mm shank for secure clamping. The combination of DIN 352 conformity and ISO2 (6H) tolerance reduces rework and ensures interchangeability in serial and maintenance work. Order the tap directly via Metav Werkzeuge or consult the team for technical clarification. Hand tap DIN 352 No.2 M10×1.5 HSS ISO2 (6H) – TECWERK The Hand tap DIN 352 No.2 M10×1.5 HSS ISO2 (6H) is a manual threading tool designed to produce standard metric M10×1.5 threads in steels of typical workshop strength. HSS construction for durable cutting DIN 352 standard, right-hand cutting Metric M10×1.5 thread, ISO2 tolerance (6H) Suitable for steels up to approx. 900 N/mm² Consistent metric threads that reduce rework The tap is built from HSS, a material known for its toughness and wear resistance, which supports consistent cutting performance in everyday workshop use. Compliance with DIN 352 and the ISO2 (6H) tolerance class means produced threads match standard gauges and mating parts reliably, lowering the need for reworking components. The adherence to the metric thread form (referenced in DIN 13 Blatt 1) makes this tool appropriate where repeatable, standardised threads are required for assemblies or repairs. Engineered for typical steel machining demands Designed for use in steels up to approximately 900 N/mm², the tool’s geometry and material combination balance cutting action and tool life. The right-hand cutting configuration and precise flute form promote controlled chip evacuation when combined with adequate lubrication, which maintains thread profile integrity and extends service intervals. The 7 mm shank offers a compact interface suited to standard tap wrenches and collet chucks, providing stable drive and straightforward handling when working on maintenance, prototyping or small-batch production. Practical handling and workshop compatibility As a hand-operated threading tool, this tap delivers fine control in blind and through-hole applications when used with the correct tapping technique and cutting fluid. The solid HSS construction supports repeatable results across a range of workshop tasks while the metric M10×1.5 specification ensures compatibility with widely used fasteners and components. The tool’s compact design and compliance with industry standards make it a pragmatic choice for machinists seeking dependable manual threading without specialist equipment. For robust metric threading in steel, request availability or technical advice from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery from Emmerich. Technical data Article number: 2000867156NW Description: Hand tap DIN 352 No.2 M10×1.5 HSS ISO2 (6H) TECWERK Brand: TECWERK Packaging unit: 1 Core specifications Thread: M10×1.5 Tolerance: ISO2 (6H) Shank diameter: 7 mm Material: HSS Suitable material strength: up to approx. 900 N/mm² Materials & special features DIN 352 compliant Right-hand cutting Metric ISO thread form (DIN 13 Blatt 1) For steel machining Solid HSS cutting material FAQ How should the tap be used for best results? Use a proper tap wrench or suitable holder, apply cutting fluid, and advance with steady, controlled strokes; remove chips frequently. The Hand tap DIN 352 No.2 M10×1.5 HSS ISO2 (6H) is intended for manual tapping with attention to correct alignment and lubrication. Which materials can this tap machine? The tool is specified for steel machining up to approx. 900 N/mm². It is optimised for standard steels; harder materials outside this range require specialist tooling. Does the shank fit standard tap wrenches? Yes; the 7 mm shank diameter permits secure clamping in common tap wrenches and compatible holders for controlled manual operation. What maintenance is recommended? Keep the tap clean, use appropriate cutting fluid during operation, inspect for wear or rounding of cutting edges, and replace when thread quality declines. Is the thread form fully standardised? Yes; the tap follows DIN 352 for hand taps and the metric thread form as per DIN 13 Blatt 1, producing ISO-compliant M10×1.5 threads. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Efficient, durable thread production results from the combination of HSS cutting material and the conservative ISO2 (6H) tolerance; choose this hand tap for dependable M10×1.5 metric threads and order the tool directly via Metav Werkzeuge or consult Metav’s advisors for technical clarification. Hand tap DIN 352 No.3 M10×1.5 HSS (ISO2) — TECWERK Hand tap DIN 352 No.3 M10×1.5 HSS (ISO2) TECWERK is a straight-cutting, right-hand hand tap designed for forming metric internal threads in medium-strength steels and workshop applications. Solid HSS for robust wear resistance DIN 352 / DIN 13 compliant design ISO2 (6H) tolerance for accurate M10×1.5 threads Suitable for steels up to ~900 N/mm² Consistent thread quality for reliable assemblies The conservative ISO2 (6H) tolerance, referenced to DIN 13, ensures produced threads meet established metric interchangeability standards — a clear advantage for assemblies that require repeatable fit and function. With the designation for M10×1.5 metric ISO threads, the tool is tailored to common engineering fastenings, reducing rework and ensuring components mate consistently. This standard conformity supports quality control processes and simplifies inspection criteria in production or repair environments, making compliance straightforward for purchasing and quality assurance teams. Robust cutting performance tailored to steel machining Made from HSS (high-speed steel), the tap combines toughness with cutting-edge hardness to withstand the demands of machining ferrous materials. The tool is specified for use in steels up to approximately 900 N/mm², which encompasses a wide range of mild and medium-alloy steels encountered in assembly work and maintenance. The right-hand cut design follows conventional machining practice, providing intuitive handling and predictable chip formation. This results in longer tool life and consistent performance, which translates into fewer tool changes and more efficient throughput on the shop floor. Practical handling and compatibility to save time A 7 mm shank provides straightforward compatibility with common tap holders and manual wrenches, enabling rapid set-up and secure clamping for both hand-tapping and guided tapping operations. The shank size and standardised geometries mean that the tool integrates smoothly into existing tool assortments without requiring specialised adaptors. The nominal shaft configuration supports stable alignment, helping to reduce the likelihood of cross-threading and making the tapping process more reliable for technicians with varying levels of experience. A sensible workshop choice for maintenance and production As a compact, standards-based hand tap, this tool is a pragmatic option for workshops seeking dependable threadmaking without specialised equipment. Conformity to DIN 352 and the referenced metric standards ensures the component is understandable across supply chains and tooling inventories, simplifying stock management. The combination of precision and wear resistance supports both intermittent maintenance tasks and small-batch production runs, offering a balance of durability and value that aligns with Metav’s commitment to accessible precision for every workshop. Select the TECWERK hand tap through Metav Werkzeuge for dependable metric threadmaking; Metav Werkzeuge in Emmerich can provide procurement guidance and technical advice to ensure the tool matches specific application needs. Technical data Article number: 2000867176NW SKU / UID: 2000867176NW Packaging unit: 1 Facts Thread size: M10×1.5 Shank diameter: 7 mm Material strength suitability: up to ~900 N/mm² Tolerance: ISO2 (6H) Special features Material: HSS (high-speed steel) Standard: DIN 352 Thread standard reference: DIN 13 Sheet 1 Cut direction: right-hand cutting Application: metric ISO threads in steels FAQ What thread form does this tap produce? The tool produces a metric M10×1.5 ISO thread in accordance with DIN 13, ensuring standardised thread form and pitch for common engineering fasteners. Which materials is this tap suitable for? The TECWERK hand tap is specified for use in steels up to approximately 900 N/mm², making it appropriate for mild and medium-alloy steels encountered in general maintenance and production. What does ISO2 (6H) tolerance mean in practice? ISO2 (6H) denotes a commonly used tolerance class for internal threads that provides a precise, conservative fit; users can expect reliable interchangeability with standard bolts and components. How should the tap be held for safe operation? Use a suitable tap wrench or holder that accepts a 7 mm shank, and ensure secure, axial alignment during hand-tapping to reduce the risk of cross-threading. Is the cutting material suitable for long runs? Constructed from HSS, the tap offers a combination of toughness and hardness; it is well suited for workshop use and moderate production volumes where wear resistance and impact tolerance are beneficial. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS cutting material and ISO2 (6H) tolerance for accurate, repeatable thread production; the tool is suited for steels up to approximately 900 N/mm², enabling reliable assembly in small-scale production or maintenance work. Order the TECWERK hand tap directly via Metav Werkzeuge or consult the technical advisors if further specification is required. TECWERK Hand Tap M10×1.5 HSS (DIN 352) — ISO2 (6H) The TECWERK Hand Tap M10×1.5 HSS is a right-hand, metric ISO hand tap designed for cutting M10×1.5 threads to DIN 13 Blatt 1 tolerances, primarily for use in steel components and workshop repairs HSS construction for lasting cutting performance Metric ISO M10×1.5 thread to DIN 352 ISO2 (6H) tolerance class for precise fits Suitable for steels up to approx. 900 N/mm² Consistent thread quality for secure assemblies The tap’s compliance with DIN 352 and threading to M10×1.5 mm under the ISO2 (6H) tolerance delivers consistent thread geometry, which reduces variability in bolted connections and minimises rework. For production and repair tasks where thread fit and preload are important, this tool ensures repeatable results by cutting threads to a standardised tolerance class. The metric format and adherence to DIN standards provide straightforward integration into existing processes and inspection routines, supporting traceability and quality control. Durable high-speed steel for demanding workshop use Manufactured from HSS, the tap offers a balance of hardness and toughness suited to manual tapping of medium-strength steels. Its material composition resists abrasive wear better than standard carbon steels, extending service life during routine maintenance and repetitive operations. Rated for use in steels up to 900 N/mm², the tool is appropriate for many structural and engineering steels commonly encountered in workshops. Regular use with appropriate cutting lubricant will further conserve cutting edges and maintain dimensional accuracy over a longer service interval. Designed for straightforward handling and compatibility The hand tap features a 7 mm shank diameter that fits standard tap wrenches and holders, enabling secure clamping and stable manual control. Being right-hand cutting, it matches conventional tapping directions and machine settings, avoiding operator confusion and reducing setup time. The straightforward geometry and familiar dimensions mean minimal adaptation of tooling sockets and jigs, thereby keeping changeover times short and workflow efficient in small-batch environments. Practical guidance for reliable results To optimise tool life and thread finish, operate the tap with controlled feed and intermittent reversal when manually tapping blind holes; use a suitable cutting fluid for steel applications to aid chip evacuation and reduce heat. The tool’s conformity to DIN 13 Blatt 1 simplifies inspection and acceptance checks: measuring thread diameter and pitch against standard gauges will confirm conformity quickly. When used and maintained correctly, the tap contributes to lower assembly failures and a more dependable production flow. Choose the TECWERK HSS hand tap for precise, repeatable M10×1.5 threading and contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000867136NW Name: Hand tap M10×1.5 HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M10 × 1.5 mm Shank Ø: 7 mm Strength suitability: up to approx. 900 N/mm² Tolerance: ISO2 (6H) Special features Material: HSS Standard: DIN 352 Cutting direction: right-hand cutting Application: metric ISO thread cutting to DIN 13 Blatt 1 FAQ What materials is this tap suitable for? The TECWERK hand tap is suitable for machining steels up to approximately 900 N/mm² and is intended for typical workshop steel applications. Does the tap meet recognised standards? Yes, the tool is manufactured to DIN 352 and produces threads in accordance with DIN 13 Blatt 1, cut to the ISO2 (6H) tolerance class. Can this tap be used in a machine or only by hand? This item is a hand tap designed for manual use with tap wrenches; machine use is not recommended unless the machine is configured for manual-style taps and appropriate speeds and feeds are observed. What is the shank size and compatibility with tap wrenches? The shank diameter is 7 mm, compatible with common manual tap wrenches and holders used in workshop environments. How can long tool life and best thread finish be achieved? Use suitable cutting fluid, ensure correct alignment, employ controlled feed with intermittent chip clearance, and inspect threads against gauges to maintain performance for the TECWERK hand tap. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of high-precision, ISO-compatible threading combined with durable HSS construction and a three-step tap sequence for reliable, low-risk tapping in demanding steel applications; order directly via Metav Werkzeuge or consult the team for technical advice. TECWERK Hand tap set M12 x 1.75 HSS, ISO2 (6H) — DIN 352 The TECWERK Hand tap set M12 x 1.75 HSS ISO2 (6H) is a metric hand-tapping kit designed for cutting internal threads in both through and blind holes in steels with tensile strengths up to approximately 900 N/mm². HSS cutting material for long tool life Metric ISO thread M12 x 1.75, ISO2 tolerance For through and blind holes in steels up to 900 N/mm² Consistent, ISO-accurate threads for production environments Engineered to DIN standards, this three-piece set delivers reliable metric threads with a tolerance that matches common assembly requirements. The combination of HSS cutting material and the specified ISO2 (6H) tolerance ensures a predictable thread fit, reducing rework and assembly issues. A sequence of taper, intermediate and bottoming taps allows progressive material removal, lowering breakage risk and extending the lifetime of the cutting edges. The kit name appears only to identify the product; the focus here is on dependable thread geometry and reproducible results for everyday workshop and light industrial use. Faster tapping cycles and reduced scrap through staged cutting Using a dedicated sequence of taps improves process economy: the initial tap forms the thread lead, the intermediate tap removes most material, and the finishing tap restores thread form to tolerance, which together speeds up production and reduces scrap. The 9 mm shank offers compatibility with standard hand-holders and tapping fixtures, while the right‑hand cutting geometry matches conventional machining directions. For operations that prioritise throughput and repeatability, this kit supports a leaner workflow and steadier quality results. Robust construction and straightforward handling for daily use Made from high-speed steel, the taps resist deformation and maintain cutting performance under repeated use, especially when machining steels up to around 900 N/mm². Compliance with DIN 352 and reference to DIN 13 Blatt 1 mean the tools are produced to recognised specifications, helping to integrate them into existing quality systems. The set’s features reduce the need for frequent regrinding and simplify tool management on the shop floor, providing a practical, durable solution for maintenance shops, toolrooms and production lines. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for personalised advice on the TECWERK hand tap set and reliable supply from our Emmerich location Technical data Article number: 2000867117NW Name: Hand tap set DIN 352 M12 x 1.75 HSS ISO2 (6H) 3tlg. TECWERK Brand: TECWERK Facts Thread: M12 x 1.75 Shank diameter: 9 mm Material: HSS Tolerance: ISO2 (6H) Application strength: steels up to ≈ 900 N/mm² Special features Set comprises taper, intermediate and bottoming taps For through and blind holes DIN 13 Blatt 1 / DIN 352 referenced Right‑hand cutting FAQ What materials are suitable for machining with these taps? The TECWERK hand tap set M12 x 1.75 HSS ISO2 (6H) is specified for use in steels up to approximately 900 N/mm² tensile strength; the HSS composition supports repeated cutting in such materials. Can the set be used for blind holes as well as through holes? Yes — the set is intended for both through and blind holes; the taper, intermediate and bottoming sequence enables safe tapping into limited-depth applications. What exactly is included in the kit and how is it built? The kit contains three taps: taper (lead), intermediate (second) and bottoming (finishing) taps, manufactured to DIN 352 dimensions with a 9 mm shank and HSS cutting material (SKU 2000867117NW). What does ISO2 (6H) tolerance mean for thread fit? ISO2 (6H) denotes a standard internal thread tolerance that provides a commonly used fit for fasteners and assemblies; the specification promotes consistent mating with corresponding bolts and screws. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of precise, repeatable threading combined with the durability of high-speed steel and a secure 9 mm shank for uninterrupted workshop throughput; order directly via Metav Werkzeuge or request specialist advice from our consultants. Hand tap DIN 352 No.3 M12×1.75 HSS ISO2 (6H) — Metric hand tap, HSS, TECWERK The Hand tap DIN 352 No.3 M12×1.75 HSS ISO2 (6H) TECWERK is designed for cutting M12×1.75 metric ISO threads, suited to manual tapping tasks in workshop and maintenance environments HSS material for high wear resistance Metric ISO thread M12×1.75, DIN 13 compliant Right-hand cut, ISO2 (6H) tolerance field Shank Ø 9 mm for secure chucking Consistent thread quality for reliable assemblies The tap delivers repeatable, accurate threads by combining a defined geometry with the DIN 352 specification and ISO2 (6H) tolerance class. This ensures a predictable fit in mating components and reduces scrappage and rework. Where interchangeability matters, the compliance with DIN 13 Blatt 1 offers a recognised reference for thread form and pitch, helping procurement and production planners maintain consistent stock and assembly quality. The result is fewer rejects and a smoother production flow. Durable cutting performance that supports uptime Manufactured from HSS, this hand tap resists wear under frequent use and keeps cutting edges sharper for longer, which lowers tool-change frequency and downtime. The shank Ø 9 mm provides stable clamping in tap wrenches or holders, improving concentricity and reducing the risk of breakage during manual tapping. For operations handling steels up to approx. 900 N/mm² tensile strength, the tool offers a balanced combination of toughness and hardness that sustains performance in everyday workshop conditions. Practical suitability and recommended workflow Intended primarily for manual thread cutting, the tap is a practical choice for maintenance, prototyping and small-batch production where control and flexibility are important. For best results, drill an appropriate pilot hole before tapping and apply suitable cutting fluid to reduce friction and support chip evacuation. The right-hand cut aligns with standard machining practices, simplifying operator training and integration into existing processes. Built for simpler procurement and dependable supply As a standardised cutting tool produced under recognised metric and DIN norms, the tap simplifies inventory management and helps central purchasing achieve reliable replacements. The compact specification and clear standards marking make selection straightforward for technical buyers and workshop managers seeking predictable performance from branded cutting tools. The robust specification supports long-term workshop operation without the need for frequent spec checks. For specialist procurement advice or to secure this TECWERK M12×1.75 hand tap, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored support Technical data Article number: 2000867177NW Label: Hand tap DIN 352 No.3 M12x1.75 HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M12×1.75 Shank Ø: 9 mm Tolerance: ISO2 (6H) Standards: DIN 352; DIN 13 Blatt 1 Material strength suitability: steels up to approx. 900 N/mm² Special features Material: HSS Cutting direction: right-hand cut Type: hand tap for metric ISO threads Shank diameter suitable for tap wrenches and holders FAQ What materials is this tap suitable for? The TECWERK Hand tap DIN 352 No.3 M12×1.75 HSS ISO2 (6H) is specified for steels up to approx. 900 N/mm² and is suitable for common workshop steel applications. Is a pilot hole required before tapping? Yes, a correct pilot hole should be drilled before using the hand tap to ensure thread accuracy and reduce the risk of tool breakage when using the TECWERK M12×1.75 tap. What does ISO2 (6H) tolerance mean for assembly? ISO2 (6H) denotes a medium-fit tolerance class suitable for general engineering use, offering reliable assembly clearance for standard bolts and nuts. Can the tap be used in handheld electric tools? The tool is designed for manual tapping; for powered tapping, ensure the holder and feed control are appropriate and that the application matches the tap’s manual-design geometry. Which standards does the tap comply with? The tap is produced to DIN 352 and aligns with DIN 13 Blatt 1 thread specifications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a combination of precision and durability, with a high-speed steel geometry and ISO2 tolerance that ensures reliable assemblies and reduced rework; order directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK Hand Tap M12×1.75 HSS DIN 352, ISO2 (6H) The TECWERK Hand Tap M12×1.75 is a manual metric tap designed for cutting standard ISO threads in medium-strength steels and routine workshop applications. HSS high-speed steel construction Metric M12 × 1.75 ISO thread Tolerance ISO2 (6H) for precision fits Suitable for steels up to 900 N/mm² Accurate metric threading for dependable assemblies The tool follows DIN 352 and produces a M12×1.75 metric thread with ISO2 (6H) tolerance, which corresponds to a standard internal thread fit for general engineering and assembly tasks. This conformity to recognised standards reduces uncertainty during component matching and simplifies quality control. The standard thread profile defined in DIN 13 Blatt 1 ensures threads engage predictably with bolts and fittings, reducing the risk of premature wear or joint failure and supporting repeatable production or repair work. Robust HSS construction for extended tool life Manufactured from HSS (high-speed steel), the tap is engineered to cut reliably in common workshop materials and is rated for steels up to 900 N/mm² tensile strength. The use of HSS provides a balance between hardness and toughness, so the cutting edges retain sharpness under intermittent manual use while resisting chipping. The 9 mm shank offers a compact, rigid interface for hand-held tooling, and the right-hand cutting geometry aligns with standard tapping practice, helping to achieve clean threads with reduced risk of tool breakage. Practical design that supports efficient workflows The tap's geometry and adherence to metric standards result in straightforward handling and predictable performance in maintenance, repair and small-batch production settings. The specified tolerance ISO2 (6H) and recognised standards reduce the need for additional measurement checks, improving throughput. Where repetitive manual tapping is required, the consistent thread form and cutting material help minimise rework and scrap, contributing to time savings and more efficient workshop processes. For reliable, standard-compliant tapping choose the TECWERK HSS hand tap M12×1.75 and contact Metav Werkzeuge for tailored advice and dependable supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867157NW Name: Hand Tap M12×1.75 HSS DIN 352 ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Dimensions & core data Thread: M12 × 1.75 Shank diameter: 9 mm Tolerance: ISO2 (6H) Material strength suitability: up to approx 900 N/mm² Standards & special features DIN 352 compliance DIN 13 Blatt 1 thread profile HSS cutting material Right-hand cutting Metric ISO thread FAQ What thread size and pitch does this tap produce? The TECWERK hand tap produces a M12×1.75 metric thread, matching the standard pitch for M12 bolts and fasteners. Which materials is this tap suitable for? This HSS tap is suitable for cutting threads in medium-strength steels and is specified for use up to approximately 900 N/mm² tensile strength. What standards does the tap conform to? The tap conforms to DIN 352 and uses the thread profile defined in DIN 13 Blatt 1, with ISO2 (6H) tolerance for standard internal thread fits; SKU 2000867157NW identifies the specific article. Is this a hand (manual) tap or intended for machine tapping? This product is a hand tap per the DIN 352 designation; it is intended for manual tapping operations and routine workshop use. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a precision ISO2 (6H) tolerance combined with durable HSS construction and a 9 mm shank for reliable manual threading in steels up to 900 N/mm²; order directly via Metav Werkzeuge or consult our specialists for application guidance. Hand tap M12 x 1.75 mm DIN 352 Nr.1 – HSS, ISO2 (6H) by TECWERK The Hand tap M12 x 1.75 mm DIN 352 Nr.1 (HSS, ISO2 6H) is a manual cutting tool designed for producing metric internal threads in medium-strength steels and general workshop alloys. HSS high-speed steel construction For metric ISO threads M12 x 1.75 Tolerance ISO2 (6H) for precision fits Suitable for steels up to 900 N/mm² Accurate threads with standardised tolerance for dependable assemblies The tool complies with DIN 352 geometry and follows the thread form reference in DIN 13 Blatt 1, which together ensure consistent flank form and pitch accuracy for metric threads. The ISO2 (6H) tolerance class means threads are held to a defined dimensional allowance suitable for general engineering and assembly work, reducing rework. By selecting a tap made to these standards, workshop processes gain repeatability and lower reject rates, which supports smoother production flows and predictable fitment in mating parts. Durable HSS cutting material for extended tool life in steel Constructed from HSS (high-speed steel), the tap offers a balance between toughness and wear resistance for hand-threading tasks. The choice of HSS makes the tool suitable for use in steels with strengths up to 900 N/mm², providing resistance to micro-chipping during manual operation. This material selection translates into longer service intervals and steady cutting performance under typical workshop conditions, which benefits maintenance cycles and reduces the frequency of tool replacement. Practical design for manual operation and simple set-up The right-hand cutting geometry and a 9 mm shank diameter allow straightforward clamping in common tap wrenches and holders, facilitating quick changeovers at the bench. Right-hand cutting is standard for most workshop applications, so the tap integrates easily into established workflows without special fixturing. The compact shank and conventional form make handling and alignment intuitive, which supports efficient tapping and reduces the likelihood of thread distortion during entry. Reliable choice for everyday production and maintenance tasks As a workshop tool from TECWERK, this hand tap is intended for routine metric thread production where consistent results and straightforward use are priorities. The combination of standard-compliant geometry, HSS cutting material and practical shank dimensions makes the tool a pragmatic solution for repair, refurbishment and small-batch production. For purchasers seeking a consistent supplier of precision tools, Metav Werkzeuge offers this tap alongside an extensive range of related items to streamline procurement and ensure compatibility across tooling sets. Select the TECWERK HSS hand tap for dependable metric thread production and contact Metav Werkzeuge for purchase or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867137NW Description: Hand tap DIN 352 Nr.1 M12 x 1.75 mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: M12 x 1.75 mm Shank diameter: 9 mm Material strength suitability: up to 900 N/mm² Special features High-speed steel (HSS) cutting material DIN 352 geometry Metric ISO thread per DIN 13 Blatt 1 Right-hand cutting Tolerance field: ISO2 (6H) FAQ What materials can be machined with this hand tap? The Hand tap M12 x 1.75 mm DIN 352 Nr.1 (HSS, ISO2 6H) is specified for use in steels up to approximately 900 N/mm² and is suitable for common workshop alloys where HSS performance is appropriate. How does the ISO2 (6H) tolerance affect assembly? An ISO2 (6H) tolerance class provides a standard internal thread fit that balances manufacturability and functional clearance, ensuring predictable mating with bolts and studs produced to corresponding external thread tolerances. Is the shank compatible with standard tap wrenches? Yes, the 9 mm shank diameter is compatible with common manual tap holders and wrenches used in general workshop environments, enabling fast set-up. Does the tap follow recognised standards for thread form? The tool conforms to DIN 352 form and references DIN 13 Blatt 1 for metric thread geometry, which supports consistent profile and pitch accuracy in workshop production. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

The three-piece TECWERK hand tap set M14 x2 mm HSS ISO2 (6H) combines standard-compliant thread accuracy with robust cutting performance, making metric thread production for steels up to ≈900 N/mm² both reliable and efficient. Order the hand tap set directly via Metav Werkzeuge or ask the consultants if needed. TECWERK Hand Tap Set M14 x2mm HSS ISO2 (6H) – DIN 352, metric thread The TECWERK hand tap set M14 x2 mm HSS ISO2 (6H) is a metric threading solution for producing ISO threads in both through and blind holes, designed for industrial workshops and maintenance applications. HSS high-speed steel for durable performance ISO2 tolerance (6H) for reliable thread fit Suited for through and blind hole threads For steels up to ≈900 N/mm² tensile strength Consistent metric threads for reliable assemblies The set is specified for M14 x2 mm metric threads and manufactured to DIN 352 in accordance with DIN 13 Blatt 1, ensuring conformity with common industrial standards. The ISO2 (6H) tolerance band provides a dependable fit for bolted assemblies where thread clearance and preload consistency matter. Made from HSS, the tools maintain cutting edge integrity under typical workshop conditions; this material choice favours toughness and wear resistance during hand tapping operations. Right-hand cutting geometry supports conventional threading sequences, while the shaft Ø 11 mm ensures compatibility with standard tap handles and holders. Efficient workflow with staged taps for extended tool life The three-stage arrangement — starter, intermediate and finishing taps — reduces axial load on each individual tool and improves chip formation, which lowers the risk of tap breakage and eases manual operation. Splitting the cut across three tools accelerates production by enabling smoother entry and less rework, particularly in steels up to approximately 900 N/mm² tensile strength. The set is suitable for both through-hole and blind-hole applications, so threading tasks that require controlled chip escape or precise thread depth can be handled with the same kit. For special applications or process integration, technical advice and dimension checks are available from the supplier to assist with fixture or machine adaptations. Workshop compatibility and supply reliability for professional results Designed for industrial and trade environments, the set supports consistent quality across repeated operations and maintenance tasks. The HSS cutting material and standard-compliant geometry contribute to reproducible results, reducing scrap and rework. Supply and procurement are backed by a dependable distribution channel that emphasises product availability and traceability, making the set a practical choice for stocking in production and repair workshops. For further specification details or to confirm suitability for particular alloys and part geometries, direct consultation is recommended to align process parameters with component requirements. For consistent metric thread quality and dependable workshop supply, secure the TECWERK hand tap set through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and order arrangements Technical Data Article number: 2000867118NW Label: Handgewindebohrersatz DIN 352 M14 x2mm HSS ISO2 (6H) 3tlg.TECWERK Brand: TECWERK Facts Thread: M14 x2 mm Tolerance: ISO2 (6H) Shaft diameter: 11 mm Cutting material: HSS Standards: DIN 352; DIN 13 Blatt 1 Cutting direction: right-hand For steels up to ≈900 N/mm² Special features Metric ISO thread geometry Suitable for through and blind holes Set composition: pre (starter), middle (intermediate), finishing tap Right-hand cutting Designed for manual hand tapping FAQ What thread size and pitch does the set produce? The TECWERK hand tap set produces an M14 x2 mm metric thread, specified for ISO metric applications and manufactured according to DIN 352 and DIN 13 Blatt 1. Which materials can be machined with these taps? The taps are made of HSS and are suitable for use in steels up to approximately 900 N/mm² tensile strength; typical workshop steels fall within this range, while specialised alloys may require specific process checks. What is included in the set? The set comprises three taps: a starter (pre) tap, an intermediate (middle) tap and a finishing tap, intended to be used sequentially to improve chip removal and extend tool life. Is the tap geometry suitable for blind holes? Yes, the design of the set accommodates both through-hole and blind-hole threading, offering controlled chip formation and reliable thread profile in confined depths. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS cutting material, ISO2 (6H) thread tolerance and a compact shank Ø 11 mm, which together ensure reliable threads in steels up to approximately 900 N/mm² while keeping tool handling simple; order this tap directly via Metav Werkzeuge or consult the technical team for application advice. Hand tap DIN 352 No.3 M14×2 mm HSS ISO2 (6H) — TECWERK, right-hand metric tap The Hand tap DIN 352 No.3 M14×2 mm HSS ISO2 (6H) is a manually operated metric thread tap designed for cutting M14×2 threads in medium-strength steels, offering precise form and consistent tolerance for workshop and industrial maintenance tasks. HSS material for durability and sharpness Metric ISO M14×2 thread, ISO2 (6H) tolerance Conforms to DIN 352 and DIN 13 Sheet 1 Shank Ø 11 mm for secure mounting Consistent thread quality for assembly reliability The tap delivers a repeatable thread form thanks to the ISO2 (6H) tolerance class, which ensures parts fit without overstress or play. For production or repair work where component interchangeability matters, this results in reduced rework and fewer assembly failures. The combination of metric standardisation and the DIN 13 reference supports compatibility with common fasteners and gauges, providing an objective basis for quality control and process documentation. Robust cutting performance for medium-strength steels Manufactured from HSS, the tool resists wear while maintaining a sharp cutting edge, making it suitable for steels with tensile strength up to around 900 N/mm². The material choice enables stable cutting at typical manual tapping speeds and improves resistance to chipping in interrupted cuts. For users unfamiliar with material classes, this means the tap can be used on common structural and machine steels without premature dulling, extending service intervals and lowering tooling costs overall. Practical handling, mounting and preparation benefits A shank Ø 11 mm provides a secure grip in standard tap handles and holders, reducing wobble and improving alignment during manual operation. Compliance with DIN 352 and the right-hand cutting orientation simplify tool selection and integration into existing workflows. For workshop planners, the compact geometry and standardised thread form minimise storage complexity and allow a single tool to serve maintenance, prototyping and low-volume production tasks with reliable results. For robust, ISO-accurate hand tapping choose the TECWERK hand tap and contact Metav Werkzeuge in Emmerich for order placement or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867178NW Product name: Hand tap DIN 352 No.3 M14×2 mm HSS ISO2 (6H) Manufacturer: TECWERK Facts Thread size: M14×2 mm Shank diameter: Ø 11 mm Suitable for steels up to approx. 900 N/mm² Tolerance class: ISO2 (6H) Special features Cutting material: HSS Standard: DIN 352 Thread type: metric ISO (DIN 13 Sheet 1) Cutting direction: right-hand FAQ What materials can this tap machine threads in? This TECWERK hand tap is specified for use in steels up to approximately 900 N/mm²; the HSS cutting material provides suitable wear resistance for common structural and machine steels. Which tolerance and thread standard does the tap follow? The tool produces metric threads in accordance with DIN 13 (Sheet 1) and uses the ISO2 (6H) tolerance class to ensure standardised fit and interchangeability. Is the shank compatible with standard tap handles? Yes, the shank Ø 11 mm is compatible with common manual tap handles and holders, offering secure mounting for accurate manual tapping. Can the tap be used for blind holes or only through holes? The TECWERK hand tap is a general-purpose manual cutting tool; appropriate tapping technique and chip evacuation should be used for blind holes to avoid chip packing. How does DIN 352 affect selection and use? DIN 352 specifies geometry and tolerances for hand taps; selection of a tap conforming to DIN 352 ensures the cutting geometry and dimensions meet recognised workshop standards for manual tapping. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

A reliable, high-precision hand tap that combines HSS cutting material, DIN 352 conformity and ISO2 (6H) tolerance to produce consistent M14 x 2 threads in medium-strength steels. Secure supply and technical guidance are available through Metav Werkzeuge — contact the team for application advice or procurement. TECWERK hand tap M14 x 2 mm (HSS, ISO2 6H) The TECWERK hand tap M14 x 2 mm DIN 352 No.1 (HSS, ISO2 6H) is a manual tapping tool designed to cut metric ISO threads in steel components up to medium tensile strength, suitable for workshop and light industrial use HSS high-speed steel construction Metric thread M14 x 2 mm Tolerance ISO2 (6H) accuracy Shank Ø 11 mm for secure grip Accuracy that keeps production moving For operations where repeatable thread quality matters, this metric hand tap delivers measurable benefits. The combination of HSS cutting material and the ISO2 (6H) tolerance yields consistent thread form and fit, reducing rework and part rejection. Conforming to DIN 352 ensures the geometry and dimensions meet recognised standards, which simplifies process documentation and quality control. Used in routine maintenance or small-batch production, the tool supports predictable cycle times and helps maintain throughput in mixed workshop environments. Robust design for common engineering materials Built to endure workshop conditions, the tap features a compact shank and right-hand cutting geometry for conventional machining practice. The 11 mm shank enables a secure clamping interface with standard tap wrenches or holders, improving torque transfer and reducing slippage. Rated for use in steels up to approximately 900 N/mm², the tool is suitable for many structural and machine-grade steels; the cutting geometry and material selection balance wear resistance and toughness to extend tool life. Where unfamiliar technical terms appear, ISO2 (6H) indicates a tighter tolerance band for internal threads, resulting in a better fit for mating bolts. Quick integration and dependable supply for workshops This hand tap is straightforward to adopt in everyday workshop workflows: chamfer, align, and cut using standard hand-tapping practice or a bench-mounted guide. The tool’s right-hand cut and metric pitch align with common fastener specifications, reducing the need for special setup. From a procurement perspective, Metav Werkzeuge provides centralised supply and expert advice so small workshops and specialist repair shops benefit from a consistent quality filter and reliable stock. The combination of technical clarity and supplier reliability gives teams confidence when specifying tools for recurring maintenance or new assemblies. For specification support or to secure reliable supply from Metav Werkzeuge, contact our advisors by phone or email to discuss compatibility and ordering options — Tel: +49 2822 7131930, eMail: info@metav-werkzeuge.com Technical data Article number: 2000867138NW Label: Handgewindebohrer DIN 352 Nr.1 M14x2mm HSS ISO2 (6H) TECWERK Brand: TECWERK Packaging unit: 1 Core specifications Thread size: M14 x 2 mm Shank diameter: 11 mm Material strength suitability: up to ≈ 900 N/mm² Tolerance class: ISO2 (6H) Standard: DIN 352 Special features Cutting material: HSS Cutting direction: right-hand Metric ISO thread to DIN 13 Sheet 1 Designed for manual hand tapping FAQ What materials can be machined with this tap? The TECWERK hand tap M14 x 2 mm is intended primarily for steels and is specified for use in materials up to approximately 900 N/mm² tensile strength; it is therefore suitable for many common workshop steels. Is this tap suitable for machine tapping? This tool is a manual hand tap designed according to DIN 352 and is optimised for hand-tapping operations; machine tapping may be possible in light-duty set-ups but requires appropriate fixturing and speed control. How does the ISO2 (6H) tolerance affect thread fit? ISO2 (6H) represents a tighter internal thread tolerance, producing a closer fit with standard external threads and improving assembly accuracy for bolted connections. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of precise metric threading, durable HSS construction and ISO2 (6H) tolerance for reliable manual tapping operations; order directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. Hand tap DIN 352 No.2 M14×2 mm HSS ISO2 (6H) by TECWERK Hand tap DIN 352 No.2 M14×2 mm HSS ISO2 (6H) TECWERK is a metric threading tool for manual tapping in industrial and workshop settings HSS construction for long tool life Metric ISO thread M14×2 mm Tolerance ISO2 (6H) for precision fits Shank Ø 11 mm for standard tap wrenches Consistent, standard-compliant threads for assemblies The tap delivers metric ISO thread accuracy in accordance with DIN 352 and DIN 13 sheet 1, providing a reliable basis for fasteners and components that demand repeatable fits. The ISO2 (6H) tolerance class ensures that the internal threads produced will match standard bolts and nuts without the need for additional rework, reducing rejects and assembly time. This makes the tool especially suitable for production maintenance and repair tasks where interchangeability and traceable conformity matter. Durable HSS design for workshop robustness Manufactured from HSS, the tool combines hardness with toughness to resist wear during manual use and shorter production runs. The geometry and choice of material support cutting in steels up to approximately 900 N/mm², delivering an economical solution for common workshop steels without premature blunting. The solid construction translates into fewer tool changes and predictable thread quality, which supports a smoother workflow and reduced downtime. Practical handling and reduced setup time The shank Ø 11 mm provides a secure fit in standard tap wrenches and holders, allowing safe, controlled manual tapping. As a right-hand, metric hand tap it follows conventional operation and tooling practice, so integration into existing processes is straightforward. The clear standard compliance and defined material specification remove guesswork from tool selection, helping purchasing and shop-floor staff make informed choices quickly and efficiently. Prefer a precision-tested tap from a trusted supplier? Contact Metav Werkzeuge in Emmerich for tailored advice and procurement support — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000867158NW Label: Hand tap DIN 352 No.2 M14×2 mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Core specifications Thread size: M14×2 mm Shank diameter: 11 mm Tolerance class: ISO2 (6H) Suitable for steels up to approx. 900 N/mm² Pack unit: 1 Standards and features Material: HSS Standard: DIN 352; DIN 13 sheet 1 Cutting direction: right-hand Thread type: metric ISO thread FAQ What materials can be tapped with this tool? The TECWERK hand tap is specified for use in steels up to approximately 900 N/mm²; the HSS construction provides the necessary wear resistance for these materials. Is this tap suitable for machine tapping? This item is a hand tap designed for manual operation; for machine tapping select a tool specified for machine use. The TECWERK hand tap is optimised for controlled manual threading. What does ISO2 (6H) mean for the finished thread? ISO2 (6H) denotes a standard internal thread tolerance that produces a close, standard fit with metric bolts, ensuring interchangeability and consistent assembly performance. Which standards does the tap comply with? The tool conforms to DIN 352 and references DIN 13 sheet 1 for metric threading, guaranteeing compatibility with industry-standard components. What shank size is required for holding this tap? The tap features a shank diameter of 11 mm and is compatible with standard tap wrenches and holders that accept that size. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining HSS cutting material, an ISO2 (6H) tolerance class and suitability for both through and blind-hole threads, this M16 × 2 tap set delivers reliable, consistent thread production; order the product directly via Metav Werkzeuge or ask our consultants if needed. Hand tap set DIN 352 M16 x2 HSS ISO2 (6H) – TECWERK Hand tap set DIN 352 M16 x2 HSS ISO2 (6H) TECWERK is a precision metric tap set intended for producing M16 × 2 threads in through and blind holes, optimised for steels with tensile strength up to approximately 900 N/mm² HSS cutting material, robust performance Metric ISO thread M16 x 2 mm ISO2 (6H) tolerance for precision fit For through and blind hole threads Precision threads for demanding assemblies The three-piece metric tap set is configured as taper, intermediate and bottoming taps to distribute the cutting load across three operations, reducing breakage risk and ensuring a clean thread profile. Constructed from High-Speed Steel (HSS) and conforming to DIN 352, the set is suitable for standardised metric internal threads M16 x 2 mm and manufactured to ISO2 (6H) tolerance for a consistent fit. A 12 mm shank and right-hand cut make these taps compatible with common tapping holders and manual tools, while the geometry supports both through-hole and blind-hole applications in steels up to ~900 N/mm², providing predictable results in serial production and repair tasks. Faster, safer tapping in everyday workflows Using a sequential taper → intermediate → bottoming procedure simplifies chip evacuation and reduces hand fatigue, which translates into fewer tap failures and less rework in shop-floor environments. The set’s cutting geometry and material choice allow elevated cutting speeds compared with carbon steel taps, while retaining toughness at the core. For complex jobs or material mixes, clarification on application parameters is available from Metav Werkzeuge; technical advice helps to match coolant use, spindle torque and tapping speed to the workpiece and machine, supporting reliable cycle times and lower scrap rates. Durable design and standardised interchangeability The taps’ HSS composition offers a balance of wear resistance and toughness appropriate for general engineering steels. The ISO2 (6H) tolerance designation means threads produced will meet widely accepted assembly standards, facilitating interchangeability with mating parts produced to the same class. Compliance with DIN 352 and reference to DIN 13, sheet 1 for metric threads underlines the set’s suitability for professional use. Stored and used correctly—sharp, clean threads and appropriate lubrication—the set will maintain cutting performance over many cycles, supporting a steady production rhythm and long service life. For advice tailored to this TECWERK tap set or to arrange supply via Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com / +49 2822 7131930), request personalised application support and prompt delivery. Technical Data Article number: 2000867119NW Manufacturer: TECWERK SKU/UID: 2000867119NW Facts Thread: M16 x 2 mm Shank diameter: 12 mm Set composition: 3 pieces Suitable material tensile strength: up to ≈ 900 N/mm² Special features Cutting material: HSS (High-Speed Steel) Tolerance class: ISO2 (6H) Standard: DIN 352; DIN 13 sheet 1 Right-hand cut Application: through-hole and blind-hole threads Set includes: taper, intermediate and bottoming taps FAQ What materials can be tapped with this set? The TECWERK hand tap set is suitable for steels with tensile strength up to approximately 900 N/mm²; the HSS composition provides the necessary wear resistance and toughness for typical engineering steels. Is the set suitable for blind holes? Yes, the set is designed for both through and blind-hole threads; using the taper and intermediate taps first improves chip control before the bottoming tap completes the thread. What does ISO2 (6H) mean for the thread fit? ISO2 (6H) is a tolerance class indicating a standard internal thread fit; threads produced with this classification will meet common assembly tolerances for interchangeability. Which standards does the tap set comply with? The taps reference DIN 352 for tap geometry and are intended for metric threads according to DIN 13, sheet 1, ensuring compatibility with standard metric components. What is included in the 3-piece set? The set comprises a taper (starter) tap, an intermediate (second) tap and a bottoming (finishing) tap to complete the thread with controlled chip removal and dimensional accuracy. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Reliable precision and workshop compatibility make this tool an efficient choice for manual threading: hardened HSS cutting material and compliance with DIN 352 deliver consistent M16×2 threads, while the 12 mm shank ensures secure mounting and handling. Order the Hand tap DIN 352 No.2 M16×2mm HSS ISO2 (6H) TECWERK directly via Metav Werkzeuge or ask our consultants if needed. Hand tap DIN 352 No.2 M16×2mm, HSS, ISO2 (6H) — TECWERK The Hand tap DIN 352 No.2 M16×2mm HSS ISO2 (6H) is a right-hand cutting workshop tap for producing metric ISO threads, designed for manual tapping in steels up to approx. 900 N/mm². HSS material for robust cutting Metric ISO M16×2 thread to DIN 13 Tolerance ISO2 (6H) for precision fits Suitable for steels up to 900 N/mm² Consistent thread quality for dependable assemblies Designed to meet recognised standards, this hand tap produces M16×2 metric threads to DIN 13 Blatt 1 with the precision of ISO2 (6H) tolerance. The combination of a standardised geometry and high-speed steel cutting edges ensures repeatable thread form and dimensional accuracy. This reduces rework and assembly issues, allowing mechanical fittings to meet specified clearances and torque requirements with confidence. The tap’s conformity to DIN 352 gives procurement certainty when specifying tooling for batch work or repairs. Durable cutting performance for workshop environments Made from HSS, the tool provides sustained cutting performance in manual operations and short production runs. The right-hand cutting design and stable flute geometry resist wear when tapping steels with tensile strength up to 900 N/mm², while the 12 mm shank gives a secure fit in tap holders or collets. These material and design choices translate into longer tool life and more consistent surface finish in the thread root, supporting predictable assembly behaviour and fewer rejects in daily workshop use. Precision tolerances that simplify assembly processes A tolerance of ISO2 (6H) means threads produced with this tap achieve the required clearances for mating bolts and nuts without additional finishing. For engineering teams this reduces measurement checks and fitting trials: components align more readily, and fasteners distribute loads as intended. Compliance with DIN 352 and metric ISO threading standards makes the tool a reliable option in mixed-standard environments, helping to standardise thread quality across different batches and operators. Practical handling and safe manual use The tap’s proportions and standard shank diameter allow straightforward mounting and comfortable manual operation. Correct tapping technique—adequate lubrication, incremental feed and reversal to clear chips—extends the tool’s service life and maintains thread quality. For users requiring guidance on selection, suitability for specific alloys or best-practice tapping parameters, Metav Werkzeuge provides practical advice and application support to ensure optimal results in the workshop. Choose the TECWERK HSS hand tap for precise M16×2 thread production and contact Metav Werkzeuge for procurement or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867159NW Name: Hand tap DIN 352 No.2 M16x2mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M16×2 Shank diameter: 12 mm Suitable for steels up to approx. 900 N/mm² Tolerance: ISO2 (6H) Standard: DIN 352 Special features Material: HSS Right-hand cutting Metric ISO thread to DIN 13 Blatt 1 For manual tapping / workshop use FAQ What materials can be tapped with this hand tap? This hand tap is designed for use in steels up to approximately 900 N/mm² tensile strength; the Hand tap DIN 352 No.2 M16x2mm HSS ISO2 (6H) TECWERK performs best in such steels. What does ISO2 (6H) tolerance mean for the finished thread? ISO2 (6H) specifies a medium tolerance class for internal threads, giving a reliable fit for standard bolts and nuts without additional rework when the M16×2 thread is produced correctly. How should the tap be mounted for manual use? Use a suitable tap wrench or a 12 mm collet holder that secures the 12 mm shank; ensure firm but controlled torque and use cutting fluid to improve chip evacuation and tool life. Is this tap suitable for production or only for repairs? The tap is suitable for manual production runs and repair work; its HSS construction and standard geometry make it appropriate for repeated workshop use under correct operating conditions. Can the hand tap be resharpened or recoated? Resharpening is possible for HSS taps depending on wear; assess the cutting edges and consult tool service experts for refurbishment options for the TECWERK tap. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of HSS construction and an ISO2 (6H) tolerance for consistently accurate M16×2 metric threads; the robust shank diameter and DIN 352 conformity support reliable hand‑tapping in medium‑strength steels. Order directly via Metav Werkzeuge or contact our consultants for application guidance. Hand tap DIN 352 No.1 M16×2 HSS ISO2 (6H) – TECWERK Hand tap DIN 352 No.1 M16×2 HSS ISO2 (6H) is a right‑hand tool for cutting precision M16×2 metric ISO threads, designed for manual tapping tasks in metalworking and maintenance applications. High‑speed steel (HSS) construction Complies with DIN 352 standard Metric ISO M16×2 thread ISO2 (6H) Suited for steels up to approx. 900 N/mm² Shank diameter 12 mm Precision threading that reduces rework and scrap The ISO2 (6H) tolerance combined with the DIN 352 specification delivers a consistent fit and predictable assembly behaviour, which reduces the need for rework in serial production or maintenance jobs. Manufactured from HSS, the tool keeps a sharp cutting edge under repeated use and maintains dimensional accuracy when producing M16×2 threads in materials within its specified strength range. This performance orientation supports efficient workflow and reliable component interchangeability. Robust design for everyday workshop use A 12 mm shank offers stable clamping in standard tap wrenches and holders, while the right‑hand cutting geometry ensures conventional thread direction for most assemblies. The high‑speed steel composition provides a balance between toughness and wear resistance, making the tap suitable for regular manual operations. The combination of these features means fewer tool changes and less downtime, contributing to measurable productivity gains in small workshops and industrial settings alike. Practical handling and maintenance benefits As a hand tap intended for manual use, the tool excels where controlled, precise tapping is required rather than high‑speed production tapping. The HSS cutting material tolerates intermittent work and can be used with appropriate cutting fluid to improve chip evacuation and surface finish. Clear standard conformity and the defined tolerance class make tool selection straightforward for purchasing and quality assurance processes, simplifying inventory and ensuring compatibility with ISO‑specified fasteners. Choose TECWERK hand taps via Metav Werkzeuge for assured standard conformity and dependable supply — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and delivery from our Emmerich hub. Technical Data Article number: 2000867139NW Label: Hand tap DIN 352 No.1 M16×2 HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Key figures Thread: M16×2 Shank diameter: 12 mm Suitable for steels up to: approx. 900 N/mm² Tolerance class: ISO2 (6H) Features Material: HSS Standard: DIN 352 Thread form: Metric ISO (DIN 13 Blatt 1) Cutting direction: Right‑hand Tolerance/fit: ISO2 (6H) FAQ What materials is this hand tap suitable for? This hand tap is specified for use in steels up to approximately 900 N/mm² tensile strength and performs reliably when used within that material range. Which thread and tolerance does the tap produce? The tool cuts an M16×2 metric ISO thread with tolerance class ISO2 (6H) in accordance with the DIN 13 and DIN 352 specifications. What is the shank size and why does it matter? The shank diameter is 12 mm, which provides stable clamping in standard tap wrenches and holders to ensure straight, controlled hand tapping. Is this tap suitable for production or only for manual tasks? Designed as a hand tap, it is optimised for manual tapping and maintenance tasks; its HSS construction supports regular use but it is not intended as a direct substitute for specialised production machine taps. How does conformity to DIN 352 benefit quality assurance? Compliance with DIN 352 and the clearly defined ISO2 (6H) tolerance makes specification, inspection and procurement straightforward and reduces uncertainty in quality control processes. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS construction, DIN 352 conformity and a 12 mm shank, this hand tap delivers consistent metric threading and long service life for workshop use. Order the TECWERK Hand Tap M16 x 2 mm directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Hand Tap M16 x 2 mm, HSS, ISO2 (6H) — DIN 352 No. 3 The TECWERK Hand Tap M16 x 2 mm is a manual metric threading tool designed for machining internal threads in steels up to approximately 900 N/mm², produced to DIN standards for reliable interchangeability HSS construction for durability and heat resistance Metric ISO thread M16 x 2 mm, ISO2 (6H) Conforms to DIN 352 No. 3 for hand taps Shank Ø 12 mm, right-hand cutting Precision and material compatibility for fewer reworks The tap is manufactured from HSS, offering a balanced combination of hardness and toughness that withstands intermittent heat during manual tapping. Its M16 x 2 mm metric profile and ISO2 (6H) tolerance ensure a standardised internal thread fit suitable for general assembly tasks. For workshops machining medium-strength steels, the specification "for steels up to approx. 900 N/mm²" provides a clear limit: this tool is optimised for carbon and alloy steels in typical workshop environments, reducing the risk of premature wear or thread failure. The result is predictable fitting behaviour and fewer rejected parts. Faster, safer manual threading in everyday production Designed as a hand tap to DIN 352 No. 3, this product simplifies manual threading operations without compromising accuracy. The shank Ø 12 mm is compatible with standard tap holders and drill chucks, enabling secure clamping during hand or slow-power tapping. The right-hand cutting geometry promotes efficient chip formation and evacuation when used with appropriate cutting fluid; this improves surface finish and lowers the likelihood of tap breakage. By using the correct pilot hole and lubrication, the workflow becomes more efficient, lowering labour time and rework rates in small-batch production. Recognised standards and handling guidance to extend service life Conformity with DIN 352 and reference to DIN 13 Part 1 for thread forms means the tap matches established engineering tolerances and thread profiles, facilitating interchangeability across parts and assemblies. Practically, follow the recommended drill size for the nominal M16 x 2 mm thread, apply a suitable lubrication for the material being machined, and use controlled, reversible feed for chip clearance. These handling measures, combined with the tap's HSS cutting material and standard tolerance class, contribute to consistent thread quality and extended tool life. The clear specification supports procurement decisions where traceability and standard compliance are priorities. Choose the TECWERK hand tap for dependable metric threading and contact Metav Werkzeuge for tailored technical advice and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867179NW Label: Handgewindebohrer DIN 352 Nr.3 M16x2mm HSS ISO2 (6H) TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M16 x 2 mm Standard: DIN 352 No. 3 Shank diameter: 12 mm Cutting material: HSS Tolerance: ISO2 (6H) Suitable for steels up to approx. 900 N/mm² Right-hand cutting Special features Metric ISO thread DIN 13 Part 1 reference Right-hand cutting geometry Shank Ø 12 mm for standard holders Designed for manual tapping FAQ What materials is this tap suitable for? The TECWERK hand tap is specified for machining steels up to approximately 900 N/mm² and, being made of HSS, performs well on typical carbon and alloy steels under manual tapping conditions. Which standards does the tool conform to? The tap is produced to DIN 352 No. 3 and references DIN 13 Part 1 for the metric thread form; the tolerance is ISO2 (6H) for standard internal thread fits. What hole preparation is recommended before tapping? Use the recommended drill diameter for an M16 x 2 mm nominal thread, apply suitable lubrication for the work material, and ensure chip evacuation—these steps improve thread finish and reduce the risk of breakage when using the tap. Can the tap be clamped in a tap holder or chuck? Yes — the shank Ø 12 mm allows secure clamping in standard tap holders or drill chucks for controlled manual or slow-power tapping operations. What is included in the packaging? Packaging unit: 1; the article is supplied as a single hand tap under SKU 2000867179NW. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of precise metric thread production, robust HSS cutting performance and a three-stage tap sequence that reduces rework and improves cycle reliability; order the set via Metav Werkzeuge or consult our technical advisers for compatibility and fast supply. Hand tap set M18 x 2.5 mm, HSS, ISO2 (6H) – TECWERK The Hand tap set M18 x 2.5 mm is a right-hand, three-piece HSS kit for cutting metric ISO threads to DIN 13 standards, designed for both through and blind holes in medium-strength steels. HSS construction for high wear resistance Metric ISO thread M18 × 2.5 mm, ISO2 (6H) Three-piece set: rough, intermediate, finish Shank Ø 14 mm for secure clamping Consistent ISO threads that reduce assembly problems The set delivers metric ISO thread quality in accordance with DIN 13, using the ISO2 (6H) tolerance band to ensure repeatable fits for fastened joints. By progressing from a roughing to a finishing cutter, the process compensates for material displacement and reduces the risk of damaged threads or poor engagement. This repeatable accuracy translates into fewer rejected parts and less downtime for rework, helping production to run more smoothly when reliable thread form is required. Robust HSS construction for durability in workshop use Manufactured from HSS, the taps combine toughness with wear resistance appropriate for a wide range of production and maintenance tasks. The shank Ø 14 mm offers secure clamping in standard tap holders, supporting stable manual or powered tapping operations. The cutters are specified for use in steels up to 900 N/mm², so the kit suits general engineering and maintenance across workshops where repeatability and tool life are valued. The three-stage approach—preliminary, intermediate and finishing cutter—improves chip control and extends service intervals. Workshop-friendly design that speeds up routine work The right-hand cutting geometry and the three-piece arrangement simplify thread formation in both through and blind holes, enabling controlled chip removal and minimised hand effort during tapping. The set is intended for manual thread production and for tasks where a reliable, metric ISO thread is required without complex tooling changes. For questions about suitability in specific applications or to confirm compatibility with existing tap holders, Metav Werkzeuge’s technical team can provide guidance and clarify any detail before purchase. For fast supply and expert advice on application or compatibility, contact Metav Werkzeuge to request tailored support or to place an order through Metav Werkzeuge’s sales team. Technical data Article number: 2000867120NW Manufacturer: TECWERK Product name: Hand tap set M18 x 2.5 mm, HSS, ISO2 (6H) Facts Thread: M18 × 2.5 mm Tolerance: ISO2 (6H) Pieces: 3 Shank diameter: Ø 14 mm Material suitability: steels up to ≈ 900 N/mm² Special features Material: HSS Standard: DIN 13 Blatt 1 Cutting direction: right-hand For through and blind holes Set composition: rough, intermediate, finishing tap FAQ What materials can be machined with this set? The Hand tap set M18 x 2.5 mm (TECWERK) is specified for use in steels up to approximately 900 N/mm², making it suitable for common engineering steels and general maintenance work. Does the set include all tap stages for a clean thread finish? Yes; the three-piece configuration comprises a preliminary, an intermediate and a finishing cutter to produce clean, accurate metric ISO threads. Is the tolerance suitable for standard fasteners? The taps are manufactured to ISO2 (6H) tolerance, which is a commonly used fit for standard metric fasteners and assemblies. Can these taps be used in blind holes as well as through holes? The design and sequence of the three taps make the set suitable for both through and blind hole applications when used with appropriate tapping technique. Which holder size is required for secure clamping? A clamping system compatible with a shank of Ø 14 mm is recommended to ensure stable operation and accurate thread formation; for further compatibility questions refer to Metav Werkzeuge with SKU 2000867120NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund