Take advantage of the combination of a cobalt high‑speed steel composition, a precision tolerance field 6H, and a straight‑fluted Form B geometry for consistent, high‑quality fine threads; order directly via Metav Werkzeuge or consult the team for application advice. TECWERK machine tap MF12×1.5 DIN 374B – HSS‑Co, Form B The TECWERK machine tap MF12×1.5 DIN 374B is a machine tap engineered for producing metric ISO fine threads in steels, malleable cast iron and long‑chip non‑ferrous metals with consistent dimensional accuracy. HSS‑Co for enhanced wear resistance Form B with straight flutes and relieved flanks Tolerance field 6H for precise thread fit Reliable material performance for demanding threads The threading tool is manufactured from HSS‑Co (cobalt high‑speed steel), a material selected to provide improved hardness and wear resistance when machining tougher grades. Combined with the tolerance field 6H and compliance with DIN 13, the tool produces metric ISO fine threads with reproducible fits, which is essential where thread accuracy affects assembly performance and interchangeability. This composition and specification support machining in steels up to ca. 1000 N/mm², malleable cast iron and long‑chip non‑ferrous metals, ensuring the tool sustains dimensional stability over longer production runs. Optimised geometry for clean chip control and reliable starts The Form B geometry with straight fluted design and relieved flanks improves chip formation and evacuation when cutting fine threads, reducing the risk of jamming in through holes. The integrated shear chamfer for through threads enhances the thread start and minimises burr formation, which shortens secondary finishing operations. These features translate into fewer interruptions, steadier cycle times and a more reliable machining process in automated or manual tapping setups. Practical design for workshop integration and tool life With a shank Ø 9 mm, the tool is designed for secure clamping in standard machine holders and collets, allowing straightforward integration into existing production equipment. The combination of a machine‑grade shank and the cobalt alloy matrix ensures improved resistance against softening at elevated cutting temperatures, extending useful service life and reducing replacement frequency. The tool’s specification as a machine tap makes it suitable for production environments where repeatability and throughput matter, while the geometry minimises rework and supports efficient downstream assembly. For precise production of MF12×1.5 fine threads with TECWERK’s HSS‑Co construction, contact Metav Werkzeuge for ordering or technical clarification: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 2000867472NW Name: Maschinengewindebohrer DIN 374B MF12x1,5mm HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: MF 12 × 1.5 Tolerance: 6H Shank diameter: 9 mm Material suitability: steels up to ca. 1000 N/mm² Special features HSS‑Co (cobalt high‑speed steel) Form B, straight fluted Flanks relieved Metric ISO fine thread (DIN 13) Shear chamfer for through threads Suitable for malleable cast iron and long‑chip non‑ferrous metals FAQ What materials can be machined with this machine tap? The TECWERK machine tap MF12×1.5 DIN 374B is suitable for steels up to ca. 1000 N/mm², malleable cast iron and long‑chip non‑ferrous metals as indicated in the product specification. What does the tolerance field 6H mean for thread fit? Tolerance field 6H, specified for this machine tap, denotes the standard internal thread tolerance for metric ISO threads and ensures consistent, snug fits in typical assembly applications. How does the shear chamfer help with through threads? The integrated shear chamfer on the tool improves the thread start and chip separation when producing through threads, which reduces burrs and the need for secondary finishing. Is the shank diameter compatible with standard machine holders? Yes, the shank Ø 9 mm is intended for secure clamping in common collets and holders used in machine tapping operations. Why is HSS‑Co chosen for this tap? HSS‑Co (cobalt high‑speed steel) provides higher hot hardness and wear resistance compared with standard HSS, which benefits thread quality and tool life when machining tougher materials listed for this tap. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of precise metric fine-thread production and long tool life with the strength of HSS‑Co and a vapour coating; the result is consistent, ISO‑class thread accuracy and reduced rework. Order the machine tap directly via Metav Werkzeuge or consult the Metav team for application advice. Machine tap DIN 374B — MF12 × 1.25 HSS‑Co, Universal (TECWERK) The Machine tap DIN 374B is a universal high-speed steel cobalt tool for cutting MF12×1.25 metric fine threads in a wide range of metals, designed for use in production machines and tapping heads HSS‑Co for high wear resistance Vapour‑coated for improved lifespan Straight flute for reliable chip evacuation ISO2 (6H) tolerance for accurate threads Consistent fine-thread accuracy for production use The Machine tap DIN 374B combines HSS‑Co construction with ISO‑class tolerance to deliver repeatable results in production runs. The designation MF12×1.25 indicates a metric fine thread; paired with the 6H tolerance field this ensures a snug, standard-compliant fit in mating parts. Using a tool with such specification reduces the likelihood of rejects and post-process rework, which supports efficient throughput on the shop floor. The robust material composition also contributes to dimensional stability under load. Cutting geometry that supports clean chips and reliable form A straight-flute design with relieved flanks and a chamfered lead for through threads optimises chip flow and reduces the risk of clogging in blind or through holes. The vapour‑coated surface treatment and green ring identification mark indicate enhanced surface hardness and quick recognition in tool racks. These geometry choices make the tool suitable for continuous machining where predictable chip behaviour and consistent thread form are essential, particularly when working with a range of alloys. Wide application range and secure clamping The tool is specified for machining steel, stainless steels, spheroidal cast iron and non‑ferrous metals, offering versatility across maintenance, prototyping and serial production tasks. The Form B, universal type design is compatible with common machine tap holders and tapping spindles; the 9 mm shank provides a compact mounting diameter for use in multi-spindle or automated cells while maintaining sufficient rigidity for precise thread generation. This combination supports flexible integration into existing machining setups. Practical handling and shop-floor recommendations To prolong service life and maintain thread quality, apply appropriate cutting fluid for the work material and ensure correct spindle alignment and feed control during tapping cycles. The vapour coating enhances surface durability but does not substitute for correct machining parameters; controlled feed and regular inspection of thread form will secure the expected service life. Supplied as a single unit, the tool is ready for immediate installation in production or maintenance environments. For availability, batch sizes and specialist machining advice on this TECWERK machine tap, contact Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867654NW Manufacturer: TECWERK Designation: Machine tap DIN 374B MF12×1.25 HSS‑Co Facts Thread: MF12 × 1.25 mm Tolerance field: ISO2 (6H) Shank diameter: 9 mm Packaging unit: 1 Special features Material: HSS‑Co Form: Form B, universal type Flute: straight flute Coating: vapour‑coated Flank treatment: relieved flanks Application: steel, stainless steels, spheroidal cast iron, non‑ferrous metals Through-hole capability: chamfered lead for through threads FAQ What materials is this tap suitable for? The TECWERK machine tap is specified for steel, stainless steels, spheroidal cast iron and non‑ferrous metals, making it suitable for diverse machining tasks. What thread and tolerance does the tool produce? This tool cuts an MF12 × 1.25 metric fine thread to the ISO2 (6H) tolerance, delivering standardised fits for mating components. Is the tap intended for through holes or blind holes? The design includes a chamfered lead for reliable performance in through threads, while the straight flute and relieved flanks also permit use in many blind-hole applications with appropriate chip control. What is the shank diameter and how does it affect mounting? The shank diameter is 9 mm, which facilitates secure clamping in standard small-diameter tap holders and is suitable for multi-spindle and machine tap systems. Which standard does the tool conform to? The product follows the DIN 374B specification for machine taps and is produced as a universal form B tool for industrial tapping operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high-performance HSS‑Co material, a Form B straight‑flute geometry and precise ISO tolerance to produce consistent metric fine threads with low rework rates; order directly via Metav Werkzeuge or consult our specialists for application advice. Machine tap DIN 374B Univ. MF12x1.5 mm — HSS‑Co, Form B (TECWERK) The Machine Tap DIN 374B Univ. MF12x1.5 mm is a universal, straight‑fluted machine tap designed for metric fine threads in a wide range of engineering materials. HSS‑Co for increased wear resistance Straight‑fluted Form B for reliable chip control Metric fine thread MF12x1.5 mm, tolerance ISO2 (6H) Shank Ø 9 mm, universal type Consistent thread quality for serial production The cobalt‑alloy high‑speed steel construction (HSS‑Co) delivers elevated hot hardness and abrasion resistance, which translates into longer tool life and fewer interruptions in production. Combined with the Form B straight‑flute geometry, the tool supports controlled chip formation and evacuation, reducing the risk of thread damage in through holes. This specification suits repetitive machining tasks where dimensional repeatability and surface integrity of internal threads are required, making it appropriate for batch and automated manufacturing environments. Broad material compatibility for mixed workflows Engineered for application across assorted substrates, the tap is specified for steel, stainless steels, spheroidal cast iron and non‑ferrous metals, enabling one tool to cover multiple workpieces in mixed‑material production. The universal designation and robust material choice minimise tool changes and lower tooling inventories, while the vapourised surface treatment enhances performance in abrasive or intermittent cutting conditions. The result is improved workflow efficiency and reduced handling between operations. Precision standards that support assembly reliability Manufactured to DIN 13 and finished to the metric fine thread form MF12x1.5 mm with tolerance ISO2 (6H), the tap provides defined dimensional and tolerance characteristics for high‑fit assemblies. Such standard compliance ensures interchangeability and predictable fit with mating parts, which is crucial where seal integrity, preload or positional accuracy are critical. Using a tool that complies with established thread standards reduces inspection effort and supports leaner quality assurance processes. Tool geometry and handling advantages The tool features straight flutes with relieved flanks, a green identification ring and a chamfer specifically for through threads, which facilitates chip flow and reduces entry torque at the start of threading. The shank Ø 9 mm supports compatibility with standard machine holders and reduces vibration when clamped correctly, while the universal design enables use across a range of machine setups. These geometric attributes combine to lower breakage risk and to simplify process planning for engineers and operators. For reliable metric fine threading with TECWERK machine taps, contact Metav Werkzeuge for tailored application advice and fast supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867655NW Designation: Maschinengewindebohrer DIN 374B Univ. MF12x1,5mm HSS‑Co vap.6H TECWERK Manufacturer: TECWERK Facts Thread size: MF12 x 1.5 mm Shank Ø: 9 mm Tolerance: ISO2 (6H) Special features Material: HSS‑Co (cobalt high‑speed steel) Form B, straight‑fluted Vapourised surface treatment Green identification ring Relieved flanks Chamfer for through threads Complies with DIN 13 Application: steel, stainless steels, spheroidal cast iron, non‑ferrous metals Type: Universal machine tap FAQ Which materials is this tap suitable for? The TECWERK machine tap is specified for steel, stainless steels, spheroidal cast iron and non‑ferrous metals, enabling flexible use across common industrial substrates. Does the tap support through‑hole threading? Yes, the tool includes a chamfer designed for through threads, improving chip evacuation and reducing start‑cutting forces when producing through holes. What tolerance and standard does the thread meet? Threads produced with this tap conform to DIN 13 and are finished to the metric fine thread size MF12x1.5 mm with ISO2 (6H) tolerance for consistent assembly fit. What is the shank size and how does it affect clamping? The shank diameter is 9 mm, a common size for machine holders; correct clamping of the 9 mm shank helps reduce vibration and supports repeatable machining results. Is the tool suited for serial production and automated machines? Built from HSS‑Co with a straight‑flute Form B design and vapourised treatment, the tap is well suited to serial production where wear resistance and controlled chip formation are priorities. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co toughness, a 40° helix for improved chip evacuation and ISO2 (6H) tolerance for consistently accurate metric fine threads; order directly via Metav Werkzeuge or ask the consultants for specification support. Machine tap DIN 374C Univ. M12 x 1.25 HSS‑Co, 40° helix – TECWERK A universal machine tap, Machine tap DIN 374C Univ. M12 x 1.25 HSS‑Co, designed for producing precise metric fine threads in blind holes across a range of engineering materials. HSS‑Co for high wear resistance 40° right‑hand helix for chip control ISO2 (6H) tolerance for exact thread fit 9 mm shank for robust toolholding Consistent cutting performance through cobalt high‑speed steel The use of HSS‑Co (cobalt high‑speed steel) delivers improved hot hardness and extended tool life compared with standard high‑speed steel. This material choice means fewer tool changes and more predictable process windows when machining steel, stainless steel or non‑ferrous metals. For production environments where downtime is costly, the alloyed substrate maintains cutting edges under elevated temperatures, reducing wear and ensuring that thread quality remains within specification over longer batches. Accurate fine threads with DIN conformity for reliable assemblies Compliant with DIN 374C and intended for metric ISO fine thread M12 x 1.25, the tap meets established standards for thread geometry and quality. The ISO2 (6H) tolerance class ensures a consistent internal fit, which minimises assembly play and the need for rework. The form and relief of the cutting flanks are engineered to reduce insertion torque and lower the risk of thread distortion, delivering reliable thread profiles for components that demand precise mating and repeatable performance. Optimised chip evacuation and surface finish for blind‑hole tapping A 40° right‑hand helix provides aggressive chip control, particularly advantageous when forming threads in blind holes, as chips are guided away from the cutting edge and out of the hole more effectively. The tap’s vapourised coating improves lubricity and wear resistance in interrupted cuts, while the flank relief reduces friction at the thread flank, aiding surface finish and reducing the tendency to gall. The 9 mm shank secures the tool in standard collets and holders for stable machining under power tapping conditions. Practical benefits for workshop and production use The universal design and material compatibility make this tool suitable for general workshop and industrial use where fine threads are required across mixed workpiece materials. By standardising on a robust thread‑forming tool that adheres to DIN/ISO norms, procurement can reduce variant stock while maintaining process reliability. For technical clarifications or application advice, Metav Werkzeuge provides specification guidance and can advise on machine settings and coolant strategies to match the chosen workpiece material and tapping cycle. For precision tapping where durability and repeatability matter, choose the TECWERK machine tap with HSS‑Co and a 40° helix — consult Metav Werkzeuge for tailored recommendations and reliable supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867925NW Designation: Machine tap DIN 374C Univ. M12 x 1.25 HSS‑Co vapourised 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867925NW Specifications Thread: M12 × 1.25 (metric fine thread) Tolerance class: ISO2 (6H) Helix angle: 40° Shank diameter: 9 mm Features HSS‑Co material Form C (DIN 374C) Universal type Vapourised coating Green ring marking Right‑hand helix 40° Relief on flanks For blind‑hole tapping Conforms to DIN 13 Suitable for steel, stainless steel, spheroidal graphite cast iron and non‑ferrous metals FAQ Which materials can be machined with this tap? The TECWERK machine tap is suitable for steel, stainless steel, spheroidal graphite cast iron and non‑ferrous metals, as specified in the product features. Is this tap suitable for blind holes? Yes, the tool is designed for blind‑hole tapping, with a helix and relief geometry that favour chip evacuation from closed holes. What tolerance and thread form does the tap provide? The tap produces an M12 × 1.25 metric fine thread to DIN 13, with ISO2 (6H) tolerance for accurate internal fit. How does the vapourised coating affect performance? The vapourised coating reduces friction and enhances wear resistance, improving tool life and surface finish in interrupted cuts and demanding materials. Which shank size is required for the toolholder? The tap has a 9 mm shank, intended for secure clamping in compatible collets and holders. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high‑speed cobalt performance, precise 6H tolerance and efficient chip control for reliable thread production and fewer reworks; order the tap directly via Metav Werkzeuge or consult the team for application guidance. Machine thread tap DIN 374C MF 12 x 1.5 mm HSS‑Co 6H — TECWERK A machine thread tap DIN 374C MF 12 x 1.5 mm HSS‑Co 6H designed for forming metric fine threads in blind holes across a range of steels and long‑chipping non‑ferrous metals. HSS‑Co for high cutting performance 40° right‑hand spiral for chip evacuation Relief‑ground flanks for precise thread form Suitable for blind holes, shank Ø 9 mm Consistent performance for demanding machining The TECWERK machine thread tap is manufactured from HSS‑Co, offering superior wear resistance compared with standard high‑speed steels; this translates into longer service intervals and stable thread geometry under repetitive production conditions. Conformance to DIN 374C and the metric ISO fine thread specification means predictable results in series manufacture. For materials up to approx. 1000 N/mm² tensile strength, the material selection and geometry combine to reduce the frequency of tool changes and limit scrap rates, supporting a more efficient production flow. Clean threads and controlled chip evacuation The 40° right‑hand spiral and relief‑ground flanks promote regular chip formation and removal, which is particularly beneficial when producing blind holes. The spiral geometry guides chips away from the cutting edges, reducing the risk of chip jamming and improving surface finish in the thread root. With a manufacturing tolerance of 6H, the tap provides reliable interchangeability and precise fitment of mating parts, lowering rework and inspection needs in assembly processes. Machine compatibility and straightforward integration With a shank Ø 9 mm, the tool integrates into common machine tap holders and collet systems used in automated tapping stations and machining centres. The Form C design indicates a machine tap optimised for driven tapping operations, allowing straightforward implementation into existing tool sets. The compact geometry for the 12 x 1.5 mm fine pitch maintains thread accuracy while fitting typical production workflows, supporting consistent cycle times and predictable tool life. Production benefits and supply assurance Selecting a quality machine tap with these properties delivers measurable operational advantages: reduced downtime through extended tool life, fewer rejects thanks to accurate thread form, and smoother process control with improved chip handling. Metav Werkzeuge acts as a quality filter for the European market and offers supply reliability from its Emmerich location, backed by broad product availability and long‑term customer trust, which supports uninterrupted production planning. Contact Metav Werkzeuge in Emmerich for application advice and to order the TECWERK HSS‑Co machine tap with 40° spiral and shank Ø 9 mm — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 2000867486NW Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: 12 x 1.5 mm Shank diameter: 9 mm Spiral angle: 40° Tolerance: 6H Material suitability: steels up to approx. 1000 N/mm² Special features HSS‑Co material Form C machine tap Metric ISO fine thread (MF), DIN 13 Relief‑ground flanks Right‑hand spiral Suitable for blind hole threads Application: temperguss and long‑chipping non‑ferrous metals FAQ Which materials can be machined with this tap? The TECWERK machine thread tap is suitable for steels up to approx. 1000 N/mm², temperguss and long‑chipping non‑ferrous metals as stated in the technical description. Is the tap suitable for blind hole threads? Yes — the tool is specified for blind hole applications and features a 40° spiral and relieved flanks to aid chip control in such conditions. What standard and tolerance does the tap conform to? The tap complies with DIN 374C and produces a metric ISO fine thread per DIN 13 with 6H tolerance. What is the shank diameter and how does that affect holder selection? The shank diameter is 9 mm, which is intended for common machine tap holders and collet systems that accept a 9 mm shank. How does the spiral geometry influence chip behaviour? The 40° right‑hand spiral promotes controlled chip formation and evacuation, improving thread root quality and reducing the likelihood of chip clogging in blind holes. What are the core materials and construction of the tap? Construction is HSS‑Co, which provides improved wear resistance and heat tolerance compared with standard HSS, supporting longer tool life under demanding conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of cobalt HSS construction and a vapourised surface with a 40° right‑hand spiral for reliable blind‑hole tapping and consistent ISO‑class thread quality; order directly via Metav Werkzeuge or consult the technical advisors for application support. TECWERK machine tap DIN 374C — M12 x 1.5, HSS‑Co, vapourised The TECWERK machine tap DIN 374C M12 x 1.5 is a universal Type C machine tap designed for producing metric fine threads in blind holes across a broad range of engineering materials. Cobalt HSS for high wear resistance Vapourised coating and green ring identification Right‑hand spiral 40° for blind hole evacuation ISO2 (6H) tolerance for precision threads Consistent thread quality for industrial use The HSS‑Co construction delivers elevated hot‑hardness and wear resistance compared with conventional high‑speed steel, enabling longer life under demanding conditions. Combined with the vapourised coating, friction at the cutting edges is reduced, which helps to maintain thread form and surface finish on fine metric threads such as M12 x 1.5. This results in fewer rejects and less frequent reworking, supporting a more efficient production flow and predictable tool costs for the workshop. Reliable blind‑hole performance and chip control The 40° right‑hand spiral and flank relief are engineered for blind‑hole tapping: the spiral helms chips away from the cutting edges and towards the shank, reducing the risk of chip jamming deep in the workpiece. The combination of spiral geometry and vapourised surface reduces cutting forces and improves evacuation, which protects both the thread form and the machine spindle. Identification via the green ring simplifies tool selection in mixed tool sets and speeds up changeover, supporting uptime and operator confidence. Precision standards and workshop compatibility Manufactured to DIN 374C (Form C) and conforming to DIN 13 thread specifications with ISO2 (6H) tolerance, the tool produces threads that meet recognised fit and interchangeability requirements. A shank diameter of 9 mm ensures compatibility with standard collets and holders commonly found in modern machining centres. The universal Type C geometry makes this tap suitable for steel, stainless steels, spheroidal graphite cast iron and non‑ferrous metals, offering versatility for maintenance shops and production environments alike. For specification queries or application matching, Metav Werkzeuge’s technical advisors can provide tailored guidance and data sheets. For reliable fine‑thread production with cobalt performance, contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867926NW Product name: Machine tap DIN 374C, M12 x 1.5, HSS‑Co, vapourised, TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867926NW Core data Thread: M12 x 1.5 Shank diameter: 9 mm Spiral angle: 40° (right‑hand) Tolerance: ISO2 (6H) Form: C (DIN 374C) Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: vapourised surface Right‑hand spiral, flanks relieved For blind holes (suitable for blind‑hole tapping) Suitable for steel, stainless steels, spheroidal graphite cast iron, non‑ferrous metals Identification: green ring Standard: DIN 13 FAQ What materials is this tap suitable for? The TECWERK machine tap DIN 374C M12 x 1.5 is suitable for steel, stainless steels, spheroidal graphite cast iron and various non‑ferrous metals, benefiting from the HSS‑Co composition and vapourised surface. Is the tap designed for blind holes or through holes? The tap is a Form C Type designed specifically for blind‑hole applications; the 40° right‑hand spiral assists chip evacuation away from the cutting edge in blind holes. What tolerance and standard does the tap comply with? Threads produced meet DIN 13 with a tolerance field ISO2 (6H), providing precision fits for metric fine threads. What is the shank size and how is it held? The tap has a 9 mm shank diameter, suitable for standard collets and holders used in machine tool setups. How does the vapourised coating benefit machining? The vapourised coating reduces friction and heat at the cutting edge, which improves tool life and thread surface quality, especially under higher cutting speeds or intermittent production cycles. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co construction and a Form C geometry for reliable fine-thread cutting in blind holes; the tool’s 6H tolerance and suitability for steels up to approx. 1000 N/mm² ensure consistent thread quality in demanding shop use. Order or request further guidance via Metav Werkzeuge when planning integration into production. TECWERK machine tap M12 x 1.25 mm — HSS‑Co, Form C, DIN 374C The TECWERK machine tap M12 x 1.25 mm is a high-performance machine tap for producing metric fine threads (DIN 13) in blind holes, designed for industrial use in steels, malleable cast iron and long‑chipping non‑ferrous metals HSS‑Co construction for enhanced hardness and wear resistance Form C geometry with 40° right‑hand helix Flank‑honed cutting edges for improved chip control Suitable for blind holes; tolerance field 6H High productivity and consistent thread quality for industrial tapping The combination of HSS‑Co material and precise Form C geometry delivers a balance of toughness and cutting performance that supports higher cycle rates in production environments. The cobalt alloy increases heat resistance and edge retention during machining of tougher steels up to approximately 1000 N/mm², reducing the frequency of tool changes and downtime. As a result, process reliability and component repeatability improve, which is particularly important in series production and maintenance operations. Clear guidance on materials and application scope Designed for metric fine threads in accordance with DIN 13, the tool is optimised for blind‑hole tapping where controlled chip formation is essential. The specification “M12 x 1.25 mm” denotes a fine thread profile, while the 6H tolerance field ensures compatible fit with standard mating parts. The tool is suitable for use in steels, malleable cast iron and long‑chipping non‑ferrous metals, offering versatility for workshops handling mixed batches or repair work across different materials. Geometry and chip control explained for safe, reliable results A 40° right‑hand helix combined with flank‑honed cutting edges promotes predictable chip flow and reduces the risk of chip jamming in blind holes. The honed flanks lower cutting forces and improve surface finish by smoothing the engagement between tool and workpiece. In practice, this geometry helps maintain machine spindle and tapping head life while producing clean internal threads with minimal rework. Compatibility, mounting and operational considerations The tool’s shaft Ø 9 mm allows secure clamping in common tapping fixtures and tooling systems used on CNC machines and tapping heads. Designed as a machine tap for power tapping operations, the component benefits from controlled feed and rigid support to exploit the HSS‑Co material advantages fully. Appropriate coolant and correct spindle speeds for the workpiece material further enhance tool life and thread accuracy. For tailored technical advice and delivery options from Emmerich, contact Metav Werkzeuge for assistance with integrating TECWERK machine taps into production or for availability information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000867485NW Label: Maschinengewindebohrer DIN 374C MF12x1,25mm HSS-Co 6H TECWERK Brand: TECWERK Packaging unit: 1 Facts Thread: M12 x 1.25 mm (metric fine thread) Tolerance: 6H Shaft diameter: 9 mm Helix angle: 40° Suitable for steels up to approx. 1000 N/mm² Special features Material: HSS‑Co Form: Form C Right‑hand helix Flank‑honed cutting edges For blind holes (Sacklochgewinde) Standard: DIN 13 Application materials: steels, malleable cast iron, long‑chipping non‑ferrous metals FAQ What thread standard does this tap produce? The TECWERK machine tap produces a metric fine thread according to DIN 13 with a specification of M12 x 1.25 mm and a tolerance field of 6H. Which materials can be machined with this tap? The tool is suitable for steels up to approx. 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals as specified for the TECWERK machine tap (SKU 2000867485NW). Is this tap suitable for blind‑hole tapping? Yes, the design explicitly supports blind holes; the Form C geometry and flank‑honed edges aid chip control in blind‑hole applications. What are the key geometry features that improve performance? The combination of a 40° right‑hand helix and flank‑honed cutting edges reduces cutting forces and improves chip evacuation, which enhances thread quality and tool life for this machine tap. What clamping interface is required for the tool? The tap features a shaft Ø 9 mm, which is compatible with standard tapping holders and chucking systems used in machine tapping operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a combination of precise metric fine threading and robust HSS‑Co cutting performance to reduce rework and ensure consistent assembly quality; order the tap conveniently via Metav Werkzeuge or consult our specialists for application‑specific advice. TECWERK Machine tap DIN 374C MF12×1 HSS‑Co, 6H The TECWERK Machine tap MF12×1 HSS‑Co is a Form C metric fine‑thread tool engineered for blind‑hole tapping in a wide range of steels and long‑chipping non‑ferrous metals HSS‑Co for high wear resistance Form C with 40° right‑hand helix For blind holes and MF fine threads 6H tolerance for precise thread fit Accurate fine threads for reliable assemblies The MF12×1 metric fine thread, produced to DIN 13 with a 6H tolerance, gives a predictable thread fit that reduces the need for rework and minimises assembly variation. Tight tolerances mean mating parts achieve consistent preload and alignment, which is especially valuable in precision mechanical and instrument assemblies. The standardised metric specification also supports interchangeability across suppliers and fixtures, simplifying inventory and procurement decisions. Durable cutting performance under demanding conditions Made from HSS‑Co, the tool combines high base hardness with improved red hardness from cobalt alloying, maintaining cutting edge integrity at elevated temperatures. This composition enables efficient machining in steels up to 1000 N/mm², as well as in temper cast iron and long‑chipping non‑ferrous materials. The result is extended tool life and fewer tool changes, delivering measurable savings in machine downtime and consumable turnover. Optimised geometry for blind‑hole tapping and chip control The Form C geometry with a 40° helix and relieved flanks is tailored for blind‑hole applications: the helix angle promotes smooth chip formation and evacuation, while the flank relief reduces the risk of binding at the thread root. These features lower the likelihood of tap breakage at depth and improve cycle reliability when working to a blind‑hole bottom. Where coolant and controlled feed are available, productivity and surface finish benefits are most evident. Stable clamping and machine compatibility for consistent results A 9 mm shank provides secure engagement in standard collets and holders, ensuring reliable torque transmission and concentricity in automated or manual tapping setups. Conformance to DIN 374C supports compatibility with common tapping fixtures and machining centres, simplifying integration into existing production lines. The compact tooling form is suitable for routine workshop use as well as series production, balancing stability with accessibility in confined bores. For tailored application advice on TECWERK HSS‑Co machine taps or to arrange supply via Metav Werkzeuge from Emmerich, please contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867535NW Product: Machine tap DIN 374C MF12×1 HSS‑Co TECWERK Packaging unit: 1 Core specifications Thread size: MF12×1 Tolerance: 6H Shank diameter: 9 mm Helix angle: 40° Suitable tensile strength: up to ≈1000 N/mm² Materials & features Material: HSS‑Co Form: C, right‑hand helix Flanks: relieved / honed Application: blind holes Standard: DIN 374C / DIN 13 FAQ Which materials is the TECWERK Machine tap MF12×1 suitable for? The TECWERK machine tap MF12×1 (HSS‑Co) is suitable for steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals, benefiting from the cobalt alloy’s improved high‑temperature hardness. Is this tap designed for blind‑hole use? Yes, the Form C geometry and 40° right‑hand helix make the tap optimised for blind holes, encouraging controlled chip removal and reducing the risk of tap breakage at depth. What tolerance class and thread standard does this tap produce? Threads are produced to DIN 13 as MF12×1 with a 6H tolerance class, offering a standardised fine‑thread fit suitable for precision assemblies. What clamping size is required for the tool? The tool has a 9 mm shank, which fits common collets and holders used in drilling and tapping spindles for secure clamping and accurate torque transmission. What does HSS‑Co mean and why is it beneficial here? HSS‑Co denotes cobalt‑alloyed high‑speed steel; the cobalt content increases red hardness and wear resistance, extending tool life under higher cutting temperatures and abrasive conditions common when machining tougher steels. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

The cobalt HSS construction, vapourised coating and right‑hand 40° spiral combine to deliver longer tool life and reliable metric fine threads; order the tap directly via Metav Werkzeuge or request advice from our consultants to ensure optimal integration into production. TECWERK machine tap DIN 374C – M12×1 HSS‑Co, vapourised, 6H The TECWERK machine tap M12×1 is a universal DIN 374C tap designed for cutting metric fine threads in blind holes across steel, stainless steels, spheroidal graphite cast iron and non‑ferrous metals Cobalt HSS for high wear resistance Universal DIN 374C, form C geometry Vapourised coating with green ring Right‑hand 40° spiral for blind holes Engineered for reliable, high‑efficiency threading Built in cobalt high‑speed steel (HSS‑Co) with a vapourised coating, this tool prioritises wear resistance and consistent cutting performance. The combination of alloyed substrate and surface treatment extends the service interval and reduces stoppages for tool change, which supports continuous production. Form C geometry and flank relief maintain chip control and reduce torque peaks, resulting in a steady process and fewer rejects when forming fine metric threads to DIN standards. Consistent ISO‑accurate threads in difficult materials The tap produces M12×1 metric fine threads to ISO2 (6H) tolerance, giving reliable fit and interchangeability for fine‑pitched assemblies. The right‑hand 40° spiral is specifically suited for blind holes, promoting chip evacuation into the flute rather than the root of the thread, while the flank relief lowers cutting forces and improves thread finish. Compatibility with steel, stainless steels, spheroidal graphite cast iron and a range of non‑ferrous metals makes this tool a versatile choice for mixed production environments. Designed for machine integration and dependable handling As a universal machine tap in DIN 374C form C, the tool integrates smoothly into automated machining centres and tapping heads. The shaft diameter of 9 mm supports secure clamping and repeatable concentricity, helping to reduce setup time and maintain process stability. Marking with a green ring and the vapourised finish simplifies identification on the tool board, while adherence to DIN 13 thread standards ensures compatibility with existing components and gauges. For specific cycle recommendations or to verify suitability for a particular workpiece material, the technical team can provide application guidance. Discuss production requirements with Metav Werkzeuge for tailored supply of the TECWERK machine tap; quote SKU 2000867924NW for direct delivery from Emmerich and precise advice. Technical data Article number: 2000867924NW Description: Machine tap, DIN 374C, M12×1, HSS‑Co, vapourised Brand: TECWERK Packaging unit: 1 Facts Thread: M12×1 Tolerance: ISO2 (6H) Spiral angle: 40° right‑hand Shank diameter: 9 mm Special features Cobalt high‑speed steel (HSS‑Co) Vapourised coating, green ring Flank relief for reduced cutting forces Universal type, form C geometry, DIN 374C Metric fine thread, DIN 13 For blind holes Suitable for steel, stainless steels, spheroidal graphite cast iron, non‑ferrous metals FAQ Which materials can the TECWERK machine tap handle? The TECWERK machine tap M12×1 is suitable for machining steel, stainless steels, spheroidal graphite cast iron and a range of non‑ferrous metals as indicated in the product specification. Is this tap suitable for blind‑hole threading? Yes, the right‑hand 40° spiral and flank relief are designed to improve chip evacuation in blind holes, making the tool appropriate for producing threads without through‑hole clearance. What does the ISO2 (6H) tolerance mean for thread fit? ISO2 (6H) denotes the tolerance class for internal threads, providing a standardised fit and interchangeability; the TECWERK tap produces threads that meet this tolerance for reliable assembly. What is the shank size for clamping in a tapping head? The tap is supplied with a shank diameter of 9 mm, intended for secure clamping in standard machine tool holders and tapping adaptors. How is the vapourised coating identified and what is its benefit? The vapourised coating is marked by a green ring and improves surface hardness and wear resistance, contributing to longer tool life and more consistent thread quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Order with confidence: combine robust cobalt-enhanced high-speed steel, ISO fine-thread accuracy and a secure machine shank for dependable production results; request advice from Metav Werkzeuge for integration into existing tapping processes. Machine Tap DIN 374B MF14×1 HSS‑Co 6H – TECWERK Machine Tap DIN 374B MF14×1 is a straight‑fluted, high‑precision tap for cutting metric ISO fine threads in machine applications across steels and long‑chip non‑ferrous metals HSS‑Co for improved wear resistance Straight‑fluted Form B for controlled chip flow Metric ISO fine thread MF14×1 with tolerance 6H Shaft Ø 11 mm for secure machine mounting Precision thread form for consistent assemblies The Machine Tap DIN 374B MF14×1 is engineered to produce consistent metric ISO fine threads with the 6H tolerance grade specified in DIN 13, ensuring reliable mating with standard components. The close tolerance and standard conformity reduce rework and eliminate guesswork in assembly processes, which supports predictable part interchangeability. Designed for machine tapping, the tool sustains thread quality over repeated cycles, translating into fewer rejects and steadier production yields when machining components that require precise fine threads. Geometry that supports efficient machining cycles Form B geometry and straight‑fluted design provide reliable chip control in through‑hole tapping. The tool’s shear‑cut chamfer promotes gradual thread entry and is optimised for through threads, reducing the risk of chip packing and thread damage. Flank relief grinding improves thread profile accuracy and eases cutting forces, while the shaft Ø 11 mm offers stable clamping in machine holders. Together, these features deliver smoother tapping runs, reduced cycle interruptions and predictable tool behaviour when integrated into CNC or automated tapping setups. Material choice and application range for durable performance Manufactured from HSS‑Co, the tap offers elevated red hardness and wear resistance compared with standard high‑speed steels, making it suitable for steels up to approximately 1000 N/mm² tensile strength, malleable cast iron and long‑chip non‑ferrous metals. This material and the relief‑ground flanks extend tool life under intermittent or continuous production, lowering downtime for tool changes. The clear specification of material suitability allows planners to select the correct cutting parameters and cooling strategy, improving process security and overall cost‑effectiveness per produced part. Practical benefits for workshop and production planning Adopting a dedicated machine tap with defined standards simplifies tool inventory and process documentation. The DIN conformity and explicit tolerance class make quality assurance straightforward: thread gauges and inspection routines can be applied uniformly. The robust shank diameter and machine‑oriented design reduce set‑up variation, supporting higher first‑pass yields. For facilities aiming to streamline their tapping operations, the combination of HSS‑Co toughness and Form B geometry offers a balanced solution between cutting performance and lifecycle costs. For bespoke advice on integrating TECWERK machine taps into production, contact Metav Werkzeuge for detailed application support and procurement from Emmerich; Metav’s specialists can advise on cutting data and holder compatibility Technical data Article number: 2000867231NW Designation: Machine Tap DIN 374B MF14×1 HSS‑Co 6H TECWERK Manufacturer: TECWERK Numbers / Core technical data Thread: MF14×1 (metric ISO fine thread) Tolerance: 6H Shank diameter: 11 mm Suitable tensile strength: up to approx. 1000 N/mm² Special features / Versions Material: HSS‑Co (cobalt high‑speed steel) Form: DIN 374B, Form B Fluting: straight‑fluted Flank treatment: relief ground flanks Entry geometry: shear‑cut chamfer for through threads Standards: DIN 13 Application: steels, malleable cast iron, long‑chip non‑ferrous metals FAQ What materials can this tap machine through reliably? The TECWERK machine tap is suitable for steels up to approx. 1000 N/mm² tensile strength, malleable cast iron and long‑chip non‑ferrous metals as stated in the technical data. Is the thread form compatible with standard gauges? Yes. The tap cuts a metric ISO fine thread to DIN 13 specifications with tolerance 6H, ensuring compatibility with standard thread gauges and mating parts. What advantages does HSS‑Co offer for production runs? HSS‑Co provides higher red hardness and improved wear resistance, which extends tool life during continuous or high‑temperature cutting compared with conventional HSS tools. How does the Form B, straight‑fluted design affect chip control? The straight‑fluted Form B geometry promotes consistent chip evacuation in through‑hole tapping and the shear‑cut chamfer reduces chip build‑up at the thread entry. Which shank size is required for machine holders? The tap has a shaft Ø 11 mm, designed for secure clamping in compatible machine tool holders and tapping attachments. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-precision solution that combines cobalt high-speed steel, fine-metric thread accuracy and productivity for through holes; ideal where consistent thread quality and long tool life are essential. Order directly via Metav Werkzeuge for reliable supply or request tailored advice from the Metav consultants. TECWERK Machine Tap DIN 374B MF14×1.5 HSS‑Co 6H The TECWERK Machine Tap DIN 374B MF14×1.5 HSS‑Co 6H is a straight‑fluted, Form B machine tap for producing fine metric threads in through‑hole applications. HSS‑Co for improved wear resistance Form B straight flutes for stable chip formation Tolerance class 6H for consistent thread fit Shank Ø 11 mm for secure machine clamping Accurate fine threads with industrial tolerance The machine tap is engineered to produce MF14×1.5 metric ISO fine threads in accordance with DIN 13, meeting the 6H tolerance class. The use of cobalt high‑speed steel (HSS‑Co) ensures a combination of edge stability and heat resistance, which translates into predictable dimensional results and fewer rejects in serial production. For engineers and production planners this means reproducible thread geometry and reduced rework rates, supporting tighter process control on fine‑thread components. Designed for through‑hole productivity and chip control Form B straight flutes and a dedicated peel chamfer for through threads make this tap efficient when cutting through holes. The straight‑flute geometry promotes controlled chip breaking in long‑chipping non‑ferrous metals and temper‑cast materials, while the chamfer reduces lead‑in torque and minimises risk of thread distortion at entry. The shank Ø 11 mm provides a secure interface with standard machine holders, supporting steady rotation and axial guidance during tapping cycles. Robust geometry for demanding materials The tool is suitable for use in steels with tensile strength up to approximately 1,000 N/mm², temper cast iron and long‑chipping non‑ferrous alloys. The flanks are relief‑ground, which reduces friction along the thread flanks and lowers cutting forces; this improves tool life and surface finish. Where consistent thread quality is required across mixed batches of materials, the combination of material choice and flank treatment helps maintain performance under elevated cutting temperatures and variable cutting conditions. Practical integration into workshop and production workflows As a machine tap for production use, this item supports straightforward handling and inventory management. The compact specification and compatibility with standard tapping spindles simplify setup; the robust HSS‑Co composition and design choices reduce downtime linked to frequent tool changes. For purchasing departments and workshop managers, the product offers a dependable option to consolidate tooling needs while maintaining the precision required for fine‑thread assemblies. Contact Metav Werkzeuge for supply and technical consultation on TECWERK machine taps — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss batch sizes, delivery times and compatibility with existing tapping equipment Technical data Article number: 2000867473NW Item name: Maschinengewindebohrer DIN 374B MF14x1,5mm HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867473NW Specifications Thread: MF 14×1.5 Tolerance class: 6H Standard: DIN 13 Material: HSS‑Co (cobalt high‑speed steel) Shank diameter: 11 mm Suitable for steels up to approx. 1,000 N/mm² Special features Form B, straight‑fluted geometry Flanks relief‑ground With peel chamfer for through threads For temper cast iron and long‑chipping non‑ferrous metals Designed for fine metric ISO threads FAQ Is this tap suitable for fine metric threads in compliance with DIN standards? Yes. The TECWERK machine tap produces metric ISO fine threads (MF 14×1.5) and conforms to DIN 13 with a 6H tolerance class for industrially reliable fits. Which materials can be machined with this tap? The tap is suitable for steels up to approximately 1,000 N/mm² tensile strength, temper cast iron and long‑chipping non‑ferrous metals, as specified for the TECWERK machine tap. What does Form B straight‑fluted mean in practice? Form B indicates a straight‑fluted design that provides stable chip formation and is particularly effective for through‑hole tapping when combined with the peel chamfer present on this tool. What is the shank diameter and how does it affect machine mounting? The shank diameter is 11 mm, which ensures a secure clamping interface with common tapping holders and reduces run‑out during high‑precision tapping operations. Does the tool include any geometry to aid chip removal in through holes? Yes. The tool features a peel chamfer for through threads, designed to lower lead‑in torque and assist chip evacuation when cutting through holes. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co durability, ISO2 (6H) tolerance for precise fine threads and a right‑hand spiral 40° geometry that improves chip evacuation in blind holes; order the machine tap directly via Metav Werkzeuge or ask our consultants if needed. TECWERK machine tap DIN 374C MF14×1.5 HSS‑Co, right‑hand spiral 40° TECWERK machine tap DIN 374C Univ.MF14×1,5mm HSS‑Co vap.6H TECWERK is a universal machine tap for metric fine threads, optimised for blind‑hole threading in a wide range of engineering materials Cobalt high‑speed steel (HSS‑Co) construction Metric fine thread MF14×1.5 to DIN 13 Right‑hand spiral 40° for blind holes Shank Ø 11 mm, universal Form C Precision threads that meet industrial standards and save rework The MF14×1.5 specification with DIN 13 sizing and ISO2 (6H) tolerance provides a predictable fit for mating parts in assemblies where thread accuracy matters. Manufactured from HSS‑Co, the tool maintains cutting edge integrity under thermal stress, reducing the risk of premature wear. The combination of tolerance class and material selection leads to fewer rejects and lower rework rates in serial production. For shops upgrading from standard taps, this tool delivers measurable improvements in thread quality and consistency. Designed geometry for efficient blind‑hole machining A right‑hand spiral 40° flute geometry is specifically chosen to enhance chip removal from blind holes, where chip control is critical. The spiral angle propels chips away from the cutting zone and into the flutes, reducing the likelihood of chip packing at the hole bottom and improving surface finish. The tool’s Form C (universal) design and flanks honed finish help to balance cutting forces and extend tool life while maintaining reliable performance across different hole depths. Coating, markings and shank for workshop integration The tap features a vapourised surface finish and a green ring marking that aid identification and durability in frequent use. The shank Ø 11 mm allows secure clamping in common machine holders and reduces run‑out during high‑precision tapping cycles. The overall geometry, combined with the chosen surface treatment, supports higher cutting speeds where appropriate and contributes to consistent thread quality when working on steels, stainless steels, spheroidal cast iron and non‑ferrous metals. Application benefits and process reliability Specified for blind‑hole threading, the tool is suitable for machining components in automotive, machinery and toolmaking applications where metric fine threads are required. The HSS‑Co composition provides toughness against chipping and thermal softening, while the universal profile simplifies inventory management by covering a range of general machining tasks. The overall design promotes longer intervals between replacements and streamlines production planning through dependable results. For precise fine‑thread machining with TECWERK quality and fast advice from Metav Werkzeuge, contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and ordering Technical data Article number: 2000867927NW Description: Maschinengewindebohrer DIN 374C Univ.MF14x1,5mm HSS‑Co vap.6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: MF14×1.5 Shank diameter: 11 mm Spiral angle: 40° Tolerance: ISO2 (6H) Standard: DIN 13 Special features Material: HSS‑Co Type: Universal (Form C) Coating: vapourised Marking: green ring Flanks: honed For: blind holes Suitable for: steel, stainless steels, spheroidal cast iron, non‑ferrous metals FAQ What materials can be machined with this tap? The TECWERK machine tap is suitable for steel, stainless steels, spheroidal cast iron and non‑ferrous metals, as indicated in the product specification. Is this tap suitable for blind‑hole threading? Yes, the tap’s right‑hand spiral 40° geometry is optimised for blind holes, improving chip evacuation and reducing chip packing at the hole bottom. What does ISO2 (6H) tolerance mean for assembly fit? ISO2 (6H) denotes a standard tolerance class that ensures a reliable internal thread fit with common metric bolts and screws, reducing the need for iterative adjustments during assembly. Can the tap be used at higher spindle speeds? The HSS‑Co material and vapourised finish support increased cutting speeds compared with standard high‑speed steel taps, though recommended speeds depend on the workpiece material and machine setup. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Maschinengewindebohrer DIN 374B Univ. MF14x1,5mm HSS-Co vap.6H – TECWERK Der Maschinengewindebohrer DIN 374B Univ. MF14x1,5mm HSS-Co vap.6H ist ein universelles Gewindewerkzeug für präzises Schneiden von metrischen ISO-Feingewinden in Stahl, rostfreien Stählen und NE‑Metallen und wurde für den Einsatz in Serienfertigung und Werkstatt optimiert HSS-Co für hohe Standzeit bei Stahlbearbeitung Metrisches ISO-Feingewinde MF14x1,5mm Geradegenutet, Flanken hinterschliffen für saubere Späne Mit Schälanschnitt für Durchgangsgewinde Schaft-Ø 11 mm für sichere Spannfutteraufnahme Lange Standzeit durch kobaltlegierte Schneidstofftechnik Dank des HSS-Co-Schneidstoffs bleibt die Standzeit deutlich länger als bei unlegierten Ausführungen, was Stillstandszeit und Werkzeugwechsel reduziert. Die kobaltlegierte Zusammensetzung erhöht die Warmfestigkeit, sodass das Werkstückmaterial auch bei höheren Schnittgeschwindigkeiten zuverlässig bearbeitet werden kann. So lässt sich die Produktivität in der Fertigung steigern, ohne die Oberflächenqualität zu opfern Präzises Gewindebild und saubere Spanabfuhr Die Kombination aus geradegenutetem Schaft und Flankenhinterschliff sorgt für kontrollierte Spanabfuhr und ein ruhiges Schnittbild, was insbesondere bei Durchgangsgewinden wichtig ist. Der integrierte Schälanschnitt minimiert Vorschubkräfte und verhindert das Verstopfen des Gewindeganges, wodurch Nacharbeiten reduziert und die Wiederholgenauigkeit erhöht werden Vielseitiger Einsatz in Industrie und Werkstatt Dieses Werkzeug ist geeignet für die Bearbeitung von Stahl, rostfreien Stählen, Sphäroguss und NE‑Metallen, wodurch es sich für Lohnfertigung, Maschinenbau und Instandhaltung empfiehlt. Anwender profitieren von der universellen Form B und dem Typ UNIVERSAL, die eine breite Palette von Werkstoffanforderungen abdecken, ohne dass für jede Anwendung ein spezieller Gewindebohrer nötig wäre Handhabung, Spannaufnahme und Wirtschaftlichkeit Der Rundschaft mit Schaft-Ø 11 mm ermöglicht eine sichere Aufnahme im Spannfutter und reduziert Vibrationen während des Gewindeschneidens. Durch die höhere Lebensdauer und die stabile Schnittleistung amortisiert sich der Einsatz gegenüber billigeren Alternativen bereits in kurzen Serienläufen. Für Anwender bedeutet das: weniger Lager- und Werkzeugwechsel sowie planbare Fertigungsprozesse Empfehlung: Für dauerhaft präzise Gewindefertigung die Auswahl auf TECWERK setzen und bei Fragen direkt Metav Werkzeuge kontaktieren unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 2000867656NW Marke: TECWERK Bezeichnung: Maschinengewindebohrer DIN 374B Univ. MF14x1,5mm HSS-Co vap.6H Fakten Gewinde: MF14x1,5mm Schaft-Ø: 11 mm Toleranzfeld: ISO2 (6H) Norm: DIN 13 Besonderheiten Material: HSS-Co (kobaltlegiert) Form: B Typ: UNIVERSAL Beschichtung: vaporisiert (vap.) Kennzeichnung: Grünring Spanform: geradegenutet Schneidenbearbeitung: Flanken hinterschliffen Anschnitt: Schälanschnitt für Durchgangsgewinde Einsatzmaterialien: Stahl, rostfreie Stähle, Sphäroguss, NE‑Metalle FAQ Wie hoch ist die Standzeit im Vergleich zu Standard-HSS? Die Standzeit des HSS-Co Gewindebohrers ist deutlich höher als bei Standard-HSS, da der HSS-Co-Werkstoff wärmebeständiger ist und höhere Schnittgeschwindigkeiten erlaubt; dies reduziert Werkzeugwechsel und Stillstandszeiten Für welche Werkstoffe eignet sich der Gewindebohrer besonders? Der Gewindebohrer eignet sich für Stahl, rostfreie Stähle, Sphäroguss und verschiedenste NE‑Metalle und bietet damit eine flexible Lösung für viele Fertigungsaufgaben Welche Aufnahme ist für den Schaft mit Ø 11 mm empfohlen? Für den Schaft mit Schaft-Ø 11 mm wird eine sichere Spannfutteraufnahme empfohlen, um Vibrationen zu minimieren und eine konstante Oberflächenqualität zu gewährleisten Ist der Gewindebohrer für Durchgangsgewinde optimiert? Ja, der eingearbeitete Schälanschnitt ist speziell für Durchgangsgewinde vorgesehen und sorgt für sauberes Schneiden sowie zuverlässige Spanabfuhr Welche Normen und Toleranzen erfüllt das Werkzeug? Der Gewindebohrer entspricht DIN 13 für metrische ISO-Feingewinde und erreicht das Toleranzfeld ISO2 (6H) für präzise Gewinde Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust HSS‑Co composition and a 40° right‑hand spiral for reliable chip evacuation in blind holes; the result is consistent, DIN‑compliant threads with tolerance 6H, delivered ready for immediate integration into machine tapping operations — order via Metav Werkzeuge or request tailored advice from our consultants. Machine tap DIN 374C MF14×1.5 HSS‑Co 6H by TECWERK — 40° right‑hand spiral, Form C The Machine tap DIN 374C MF14×1.5 HSS‑Co 6H is a precision cutting tool designed for producing metric fine threads in industrial machining environments, optimised for blind‑hole applications and medium‑strength materials HSS‑Co solid cobalt composition Form C with 40° right‑hand spiral Metric fine thread MF14×1.5, tolerance 6H Relieved flanks for improved surface finish High‑performance material for consistent thread quality Constructed from HSS‑Co, this tap combines hardness and toughness to resist wear during repetitive machine tapping. The cobalt‑alloy composition increases hot hardness so threads remain dimensionally stable under load and temperature variations. Suitable for processing steels with tensile strengths up to 1000 N/mm², as well as malleable cast iron and long‑chip non‑ferrous metals, the tool offers a dependable balance between life expectancy and cutting reliability. As a result, cycle times stay predictable and rework is minimised, supporting efficient production scheduling. Geometry engineered for blind holes and cleaner chips The Form C profile paired with a 40° right‑hand spiral promotes positive chip evacuation away from the cutting edge, which is especially valuable when producing threads in blind holes. The tap’s relieved flanks reduce friction at the thread flank, lowering torque and improving the surface finish of the internal thread. The DIN standard compliance (DIN 374C and DIN 13) and tolerance 6H ensure interchangeability and compatibility with ISO metric fine thread gauges, providing measurable assurance of thread accuracy in assembly contexts. Machine‑ready design that supports productivity With an 11 mm shank diameter, the tap fits standard collets and holders used in automatic tapping units and CNC machines. The designation MF14×1.5 indicates a fine pitch suited to applications requiring greater clamping strength and finer adjustment than coarse threads. The combination of material, geometry and shank size delivers predictable performance for series production and repair work alike. If selection of the correct tap for a specific component or machine is uncertain, Metav’s technical advisors can assist with fitment and process integration to reduce downtime. Contact Metav Werkzeuge for expert selection guidance or to confirm suitability of the TECWERK machine tap for specific applications — reliable advice direct from Emmerich. Technical Data Article number: 2000867487NW Description: Machine tap DIN 374C MF14×1.5 HSS‑Co 6H TECWERK Packaging unit: 1 Core Data Shank diameter: 11 mm Thread: MF14×1.5 Spiral angle: 40° Tolerance: 6H Material suitability: steels up to approx. 1000 N/mm² Special features Material: HSS‑Co Form: C Right‑hand spiral for blind holes Flanks relieved (flank honing) Standard: DIN 374C, DIN 13 FAQ What materials can be machined with this tap? The TECWERK machine tap MF14×1.5 in HSS‑Co is suitable for steels up to around 1000 N/mm², malleable cast iron and long‑chip non‑ferrous metals. Is this tap suitable for blind‑hole threading? Yes. The 40° right‑hand spiral and relieved flanks are designed to evacuate chips effectively from blind holes, reducing the risk of chip packing. What tolerance and standard does the thread meet? Threads produced with this tap conform to DIN 13 with a 6H tolerance field for metric fine threads. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS‑Co construction, a straight‑flute Form B geometry and a secure 12 mm shank for consistent fine‑thread production; order directly via Metav Werkzeuge or contact our advisors for application guidance. TECWERK machine tap DIN 374B MF16×1 mm, HSS‑Co, 6H A TECWERK machine tap DIN 374B MF16×1 mm HSS‑Co 6H designed for producing metric ISO fine internal threads in through holes and for use in demanding workshop and industrial environments High‑performance HSS‑Co construction Straight flute, Form B geometry Metric ISO fine thread MF16×1 mm, DIN 13 Shank Ø 12 mm for secure clamping Consistent fine‑thread accuracy for critical assemblies This tap delivers reproducible thread quality by combining a metric ISO fine thread geometry with tolerance class 6H according to DIN 13, ensuring compatibility with standard mating parts and gauges. The HSS‑Co material improves edge stability and heat resistance, which helps maintain thread form during extended runs. For purchasers seeking predictable results, the mix of proven standard compliance and robust tool steel yields reliable production tolerances and fewer rejects in serial tapping. Robust cutting performance in a variety of materials The Form B, straight flute design with relief‑ground flanks is optimised for chips to flow axially, making the tool well suited for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. The cobalt alloy in HSS‑Co provides increased wear resistance and thermal stability compared with conventional high‑speed steels, extending tool life under intermittent higher loads. This combination reduces machine downtime and supports steady throughput in mixed‑material workshops. Practical setup and processing guidance for reliable results A clear advantage is the shank Ø 12 mm, which allows secure clamping in standard collets and tool holders, reducing chatter and runout. The tap features a cutting lead designed for through threads, easing chip evacuation in blind‑through holes and lowering the risk of thread damage. For best results, use correct clamping, moderate spindle feed aligned with the nominal pitch, and appropriate lubrication dependent on the workpiece material; these measures protect the cutting edges and ensure consistent thread geometry. Integration into the workshop for long‑term efficiency Suppliers such as Metav position this tool within a broader offering of precision workshop supplies, simplifying procurement and inventory management. The durable construction and standardised dimensions support interchangeability with common fixtures and thread‑checking equipment, yielding lower total cost of ownership through reduced regrinds and replacements. The product thus contributes to steady production flow and aligns with established quality assurance procedures. For dependable fine‑thread machining with TECWERK HSS‑Co taps, order via Metav Werkzeuge or request tailored application advice from our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867232NW Brand: TECWERK Type: Machine tap DIN 374B MF16×1 mm Facts Thread size: MF16×1 mm Tolerance class: 6H Material: HSS‑Co Shank diameter: 12 mm Standard: DIN 13 Packaging unit: 1 Special features Form B, straight flute Relief‑ground flanks With lead for through threads Suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals FAQ Which materials are suitable for this tap? The TECWERK machine tap MF16×1 mm is suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals as stated in the product specification. Is this tap designed for through holes or blind holes? This DIN 374B tap is supplied with a cutting lead intended for through threads, which supports effective chip evacuation in through‑hole applications. What is the required clamping diameter? The tool has a shank diameter of 12 mm, enabling secure clamping in common collets and standard tool holders. What thread standard and tolerance does the tap produce? The tap produces a metric ISO fine thread MF16×1 mm to DIN 13 with a 6H tolerance class for standardised mating with threaded components. How does the HSS‑Co material benefit performance? The cobalt‑alloyed high‑speed steel (HSS‑Co) increases thermal and wear resistance compared with standard HSS, improving edge life and stability under elevated cutting temperatures. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine high wear resistance, precise tolerance class 6H accuracy and machine-ready shaft dimensions for consistently efficient thread production; order the TECWERK tap directly via Metav Werkzeuge or consult our experts for application advice. Machine thread tap MF16×1.5 HSS‑Co, straight‑fluted (TECWERK) The machine thread tap MF16×1.5 HSS‑Co is a DIN‑compliant, straight‑fluted Form B tap for producing metric fine threads in steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. HSS‑Co high‑speed cobalt steel for wear resistance Straight‑fluted Form B for stable chip evacuation Tolerance class 6H for precise metric fine threads Shaft Ø 12 mm for secure machine mounting Consistent thread fit through standardised tolerance The tool is designed to produce a metric fine thread MF16×1.5 to DIN 13, manufactured to tolerance class 6H. This specification guarantees a consistent fit in serial production and reduces rework caused by loose or tight threads. The standardised tolerance supports interchangeability between mating parts and simplifies quality control routines, allowing production planners to rely on reproducible assembly behaviour and fewer rejects. Material capability and cutting performance for workshop reliability Built from HSS‑Co (high‑speed cobalt steel), the tap stands up to higher thermal and mechanical loads than conventional HSS, which translates into longer life when machining tougher alloys. Rated for use in materials up to 1000 N/mm² tensile strength as well as cast iron and long‑chipping non‑ferrous metals, the geometry and substrate together enable controlled wear and sustained cutting performance under industrial tapping conditions. This combination reduces tool change frequency and supports steady machine throughput. Geometry engineered for machine tapping and chip control The Form B straight‑fluted design with flank relief provides predictable chip formation and evacuation during machine tapping. The integrated peel‑type cutting edge for through threads improves the chip break at the entry and reduces the risk of thread deformation, making the tool especially suited for through‑hole applications on automatic tapping spindles. Such geometry minimises spindle load peaks and supports stable cycle times on CNC spindle heads and tapping attachments. Practical mounting and handling for production environments With a shaft diameter of 12 mm, the tap is compatible with common machine holders and collet systems, ensuring secure clamping and concentric running in automatic tapping units. The straight flute and relief features make the tool straightforward to use with conventional lubrication strategies for tapping, and the DIN conformity simplifies documentation and tool management. The robust construction helps maintain dimensional accuracy over longer production runs, contributing to lower overall process costs. Choose the TECWERK HSS‑Co machine tap for robust, high‑precision tapping — contact Metav Werkzeuge in Emmerich for technical advice or to request availability at info@metav-werkzeuge.com Technical Data Article number: 2000867474NW Name: Machine thread tap MF16×1.5 HSS‑Co 6H (DIN 374B) Brand: TECWERK Packaging unit: 1 Facts Thread: MF16×1.5 Tolerance class: 6H Shaft diameter: 12 mm Material capability: up to approx. 1000 N/mm² tensile strength Special features HSS‑Co substrate Form B, straight‑fluted Flank relief ground Peel‑type cutting edge for through threads Suitable for temper cast iron and long‑chipping non‑ferrous metals Conforms to DIN 13 FAQ What materials can this tap machine on? The TECWERK machine thread tap MF16×1.5 HSS‑Co is suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. Which tolerance and thread standard does the tap follow? Threads are produced to DIN 13 with tolerance class 6H, ensuring standardised metric fine threads MF16×1.5. Is the tap suitable for machine tapping units? Yes, the straight‑fluted Form B geometry and shaft Ø 12 mm make the tap compatible with common machine holders and automatic tapping spindles. How does the HSS‑Co material benefit production? The HSS‑Co substrate offers improved heat and wear resistance compared with standard HSS, extending tool life under higher cutting loads and temperatures. What does the peel‑type cutting edge mean for through threads? The peel‑type cutting edge for through threads improves chip break and reduces risk of clogging at thread entry, supporting cleaner thread starts and more reliable cycle times. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co durability, DIN 374B accuracy and a secure 12 mm shank for dependable metric fine-thread production; order the tap directly via Metav Werkzeuge or ask our consultants if needed. Machine tap DIN 374B MF16×1.5 HSS‑Co, vapourised, 6H — TECWERK The Machine tap DIN 374B MF16×1.5 HSS‑Co vapourised 6H TECWERK is a universal, straight-flute machine tap designed for cutting metric fine ISO threads in a wide range of metallic materials. HSS‑Co construction for higher wear resistance DIN 374B Form B, universal straight flute ISO fine thread MF16×1.5, tolerance field 6H Suitable for steel, stainless and non‑ferrous metals Precision that secures interchangeability and fit The tap is made from HSS‑Co, a cobalt-alloyed high-speed steel that maintains hardness at elevated temperatures, which translates into longer tool life and consistent thread form. Manufactured to DIN 374B and intended for MF16×1.5 metric fine threads, the tool meets the ISO2 (6H) tolerance requirement — ensuring thread compatibility with standard bolts and inserts. The vapourised coating reduces friction during cutting, helping to preserve flank geometry and reduce the risk of galling when machining stainless steels. Designed for reliable chip control and repeatable quality As a Form B universal tap with a straight flute and relieved flanks, the geometry supports dependable chip evacuation in through-thread applications. The integrated cutting chamfer for through threads reduces torque peaks during entry and minimizes the chance of tap breakage, which improves process uptime and reduces rework. A clearly identifiable green ring marks the tool family for quick selection in busy production environments, while the secure 12 mm shank ensures accurate clamping and concentricity in standard tap holders. Practical integration for workshop and production use The tool is supplied individually for direct installation into machine tap holders and is suited for machining steel, stainless steel, spheroidal cast iron and various non‑ferrous metals. For best results, match the drill pilot and use an appropriate lubricant or coolant for the material being tapped; this extends tool life and improves thread surface finish. If further technical data or application advice is required, Metav Werkzeuge can provide support and practical recommendations — contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed guidance. For reliable fine-thread production with TECWERK's HSS‑Co machine tap, request the MF16×1.5 unit via Metav Werkzeuge or consult our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for application-specific advice. Technical Data Article number: 2000867657NW Label: Maschinengewindebohrer DIN 374B Univ.MF16x1,5mm HSS-Co vap.6H TECWERK Brand: TECWERK Supplied individually Facts Thread: MF16×1.5 (metric fine thread) Tolerance: ISO2 (6H) Shank diameter: 12 mm Standard: DIN 374B, Form B Special features HSS‑Co material Vapourised coating Green ring identification Straight flute geometry Relieved flanks (flank grinding) Cutting chamfer for through threads Suitable for steel, stainless steel, spheroidal cast iron, non‑ferrous metals FAQ What materials can be machined with this tap? The TECWERK machine tap is suitable for steel, stainless steel, spheroidal cast iron and various non‑ferrous metals; the HSS‑Co composition and vapourised coating support robust performance across these materials. What does the 6H tolerance mean for my threads? A 6H tolerance corresponds to ISO internal thread tolerance class ISO2, which ensures standardised fit and interchangeability of the MF16×1.5 threads produced with this tap. Which pilot hole diameter is recommended before tapping MF16×1.5? Pilot diameter depends on thread standard and material; refer to engineering tables for MF16×1.5 pilot size. For application-specific recommendations, Metav Werkzeuge can advise based on part material and process. Can the tap be used in automatic tapping heads or rigid tapping on CNC machines? The DIN 374B universal design with a 12 mm shank is compatible with common machine tap holders and rigid tapping setups; ensure clamping is concentric and machine feed is synchronized for best results. How does the vapourised coating affect tool life and performance? The vapourised coating lowers friction and reduces adhesion on the cutting edges, which improves tool life and helps maintain thread quality, particularly when machining stainless or adhesive materials. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co durability, a right‑hand spiral 40° designed for blind‑hole chip evacuation and ISO fine‑thread accuracy for dependable production results; order the TECWERK machine tap directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK machine tap DIN 374C – MF16 x 1.5, HSS‑Co, 6H TECWERK machine tap for creating metric ISO fine threads MF16 x 1.5 in blind holes, optimised for steels and non‑ferrous alloys HSS‑Co for wear resistance and heat tolerance 40° right‑hand spiral for efficient chip control ISO fine thread MF16×1.5, tolerance 6H Vapourised surface for improved service life Consistent fine‑thread accuracy for reliable assemblies The ISO fine thread MF16 x 1.5 specification paired with the 6H tolerance (DIN 13) ensures repeatable, high‑precision mating in production and repair work. This level of dimensional control reduces the risk of assembly issues and scrap, improving throughput and lowering rework rates. The universal geometry translates DIN‑defined parameters into a tool that supports consistent thread quality across batches, making process planning and quality assurance simpler. Robust material and coating for extended tool life Manufactured from HSS‑Co, the tap offers enhanced toughness and temperature resistance compared with standard high‑speed steels, which helps sustain cutting edges when machining tougher alloys. The vapourised finish adds a wear‑resistant layer that reduces friction and sticking; identification by the green ring facilitates quick tool selection at the bench. Together these characteristics deliver longer service intervals and fewer tool changes, supporting continuous machining operations. Engineered geometry for blind‑hole performance and chip control The right‑hand spiral 40° and relieved flanks promote controlled chip flow when producing blind holes, where evacuation is critical to avoid chip packing and tap breakage. The Form C / universal flute profile balances strength and evacuation, enabling reliable performance across a range of materials. For applications that require secure blind‑hole threading, this design reduces cycle interruptions and increases process confidence. Practical workshop integration and material versatility With a 12 mm shank and the universal Form C designation, the tool fits common collet and chuck‑based tapping heads, simplifying retrofit into existing set‑ups. The tap is suitable for steel, stainless steel, spheroidal graphite cast iron and non‑ferrous metals, giving procurement teams a single, versatile tool for mixed‑material shops. By conforming to established standards, it also eases inspection and documentation in quality management systems. Choose the TECWERK HSS‑Co machine tap from Metav Werkzeuge for robust, accurate fine‑thread production; contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000867928NW Name: Machine tap DIN 374C, universal MF16 x 1.5, HSS‑Co, vapourised, 6H, TECWERK Packaging unit: 1 Facts Thread: MF16 x 1.5 Tolerance: ISO2 (6H) Shank diameter: 12 mm Spiral angle: 40° Special features Material: HSS‑Co Form: C, Type: Universal Coating: vapourised Flanks: relieved / ground For blind holes Suitable for steel, stainless steel, spheroidal graphite cast iron, non‑ferrous metals Metric ISO fine thread, DIN 13 FAQ What materials can be machined with this tap? The TECWERK machine tap is specified for steel, stainless steel, spheroidal graphite cast iron and non‑ferrous metals, making it suitable for a wide range of shop applications. Is this tap suitable for blind‑hole threading? Yes, the tool is designed for blind holes and features a right‑hand spiral 40° and relieved flanks to aid chip evacuation and reduce the risk of tap breakage. What does the vapourised finish provide? The vapourised surface reduces friction and increases wear resistance, which helps extend tool life and maintain consistent thread quality under industrial use. How is thread accuracy assured for production use? Thread geometry follows DIN 13 with ISO fine thread MF16 x 1.5 and 6H tolerance, ensuring interchangeability and consistent fit across production batches using this machine tap. Can the tap be used in standard tapping heads? Yes; the 12 mm shank and universal Form C design allow straightforward mounting in common collets and tapping heads for rapid integration into existing workflows. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

High‑performance HSS‑Co construction, a 40° right‑hand spiral and 6H tolerance enable precise, repeatable fine‑thread tapping in blind holes; benefit from a secure 12 mm shank for stable clamping. Order the TECWERK machine tap DIN 374C MF16×1.5 via Metav Werkzeuge or consult our advisors for application guidance. TECWERK machine tap DIN 374C MF16×1.5 HSS‑Co 6H — HSS‑Co, 40° spiral A TECWERK machine tap DIN 374C MF16×1.5 HSS‑Co 6H engineered for accurate metric ISO fine‑thread production in blind holes, compliant with DIN 13 and specified for industrial machining tasks HSS‑Co construction for higher hot hardness 40° right‑hand spiral for effective chip removal Designed for blind holes; metric ISO fine thread Shank Ø 12 mm for secure machine clamping Consistent fine‑thread quality for production runs The tap is designed to form metric ISO fine threads (MF16×1.5) to DIN 13 standards with 6H tolerance, providing consistent thread geometry for serial production. The combination of HSS‑Co material and flank honing reduces thread burrs and minimises rework, leading to fewer rejects and predictable assembly behaviour. This reliability supports tighter production tolerances and helps maintain throughput in machining cells. Optimised chip control improves process stability A 40° right‑hand spiral promotes efficient chip evacuation when working in blind holes, reducing the risk of chip clogging and tool breakage. The form C geometry with flanks hinterschliffen (flank honing) smooths the cutting edge, extending useful tool life and ensuring cleaner thread finishes. For operations producing long chips from non‑ferrous metals or temper cast iron, this geometry gives a measurable advantage in cycle consistency. Material capability and metallurgical benefits explained Made from HSS‑Co, the tap offers improved hot hardness and wear resistance compared with standard high‑speed steel, making it suitable for steels up to approx. 1000 N/mm² tensile strength as well as temper cast iron and long‑chip non‑ferrous alloys. The cobalt alloying element maintains cutting performance at elevated temperatures, so tapping cycles remain stable under demanding conditions. This metallurgical choice reduces frequency of tool changes and supports higher productive spindle speeds where applicable. Secure clamping and machine compatibility for reliable results A 12 mm shank diameter ensures secure clamping in standard toolholders and collets, providing concentricity for accurate thread form and reduced run‑out. The tool’s machine‑tap design is optimised for automatic machining centres and tapping heads; the robust shank and central geometry support repeatable placement and minimal set‑up time. For procurement, the combination of material specification, spiral geometry and shank size delivers a pragmatic balance of durability and ease of integration into existing workflows. For precise application advice and reliable supply from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and secure the TECWERK machine tap for production use Technical data Article number: 2000867488NW Description: Machine tap DIN 374C MF16×1.5 HSS‑Co 6H TECWERK Brand: TECWERK Packing unit: 1 Facts Thread size: MF16×1.5 Shank diameter: 12 mm Spiral angle: 40° Tolerance class: 6H Material strength suitability: up to approx. 1000 N/mm² Special features Material: HSS‑Co Form: C Spiral: right‑hand 40° Flank treatment: flank honing Thread standard: DIN 13 Application: blind holes Suitable for: steel, temper cast iron, long‑chip non‑ferrous metals FAQ What materials is this tap suitable for? The TECWERK machine tap (SKU 2000867488NW) is specified for steels up to approx. 1000 N/mm², temper cast iron and long‑chip non‑ferrous metals. Is this tap intended for blind holes or through holes? This product is designed for blind holes, complying with DIN 374C and producing metric ISO fine threads MF16×1.5 with a 6H tolerance. What does HSS‑Co mean for tool performance? HSS‑Co denotes high‑speed steel with cobalt alloying; the TECWERK tap benefits from improved hot hardness and wear resistance, which supports longer tool life and stable cutting under higher temperatures. What shank size is required for clamping? The tool features a 12 mm shank, suitable for standard collet and holder systems that accept this diameter, ensuring secure clamping and concentricity. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co construction and DIN 374C Form C geometry for reliable fine-thread production in blind holes; the tap’s 6H tolerance and 14 mm shank ensure consistent machine mounting and repeatable results. Order the component directly via Metav Werkzeuge or consult the technical team for application-specific advice. TECWERK Machine Thread Tap MF 18×1.5 mm — HSS‑Co, DIN 374C, 6H TECWERK Machine Thread Tap MF 18×1.5 mm designed for metric fine threads to DIN 13; optimised for blind-hole threading and medium-to-high strength materials HSS‑Co for high cutting performance DIN 374C Form C geometry Right‑hand spiral 40° for blind holes Faster, cleaner threading in blind holes The HSS‑Co composition provides elevated red hardness and wear resistance, allowing efficient machining in tougher materials without rapid tool wear. The right‑hand spiral 40° evacuates chips toward the shank, which significantly reduces the risk of chip packing in blind holes and improves surface finish. Flanks that are precision-honed minimise burr formation and lower the need for secondary deburring—this translates into fewer rework steps and steadier cycle times on production lines that require fine metric threads. Consistent assembly fit with DIN 13 and 6H tolerance With its MF 18×1.5 mm thread form and 6H tolerance, the tool delivers a predictable internal thread geometry compatible with standard metric fine-thread fasteners. The designation to DIN 374C signals a standardised thread-cutting geometry, making the tap suitable where interchangeability and repeatable assembly play a role. For engineering teams specifying tolerance stacks, the 6H class balances manufacturing ease with reliable mating characteristics, helping to reduce rejected assemblies and ensuring consistent torque behaviour in bolted joints. Robust shank and targeted material range for workshop use A 14 mm shank diameter enables secure clamping in conventional collets and holders, supporting stable running and accurate pitch transfer from spindle to thread. The tool is designed for use in steels up to approximately 1000 N/mm² tensile strength, malleable cast iron, and long‑chip non‑ferrous metals, offering versatility across common industrial substrates. The Form C geometry and cobalt alloy combine to extend service life under intermittent production loads; when integrated into standard machining setups, the tool contributes to a predictable maintenance schedule and steady throughput. Choose the TECWERK HSS‑Co machine thread tap MF 18×1.5 mm for dependable fine-thread production—contact Metav Werkzeuge for tailored application advice and prompt supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 2000867489NW Product: Machine thread tap MF 18×1.5 mm Brand: TECWERK Core data Shank diameter: 14 mm Thread size: MF 18×1.5 mm Thread pitch: 1.5 mm Tolerance: 6H Spiral angle: 40° Packaging unit: 1 Material strength capability: up to approx. 1000 N/mm² Features & applications Material: HSS‑Co (cobalt high‑speed steel) Form C geometry (DIN 374C) Flanks honed Right‑hand spiral for blind holes For malleable cast iron and long‑chip non‑ferrous metals FAQ Which materials can be machined with this tap? The TECWERK machine thread tap MF 18×1.5 mm is specified for steels up to approx. 1000 N/mm², malleable cast iron and long‑chip non‑ferrous metals, as stated in the technical data. Is the tap suitable for blind-hole threading? Yes; the right‑hand spiral at 40° is designed to evacuate chips from blind holes, making the tool appropriate for internal threads with limited depth. What does the 6H tolerance mean for assembly? The 6H tolerance class denotes the internal thread tolerance for metric ISO fine threads and ensures predictable fit with standard external threads, supporting reliable assembly performance. How should the shank be clamped? The tap has a 14 mm shank diameter and is intended for secure clamping in compatible collets or holders to maintain concentricity and minimise runout. Which standard defines the thread form and geometry? The thread form follows DIN 13 and the tool geometry is designated DIN 374C, providing standardised dimensions and cutting geometry for industrial applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-performance combination of HSS‑Co cutting material, Form B straight flutes and a precise 6H tolerance for consistent metric fine-thread production; order directly via Metav Werkzeuge or request application guidance from our consultants. TECWERK machine tap MF 18×2 mm — HSS‑Co, Form B (DIN 374B) The TECWERK machine tap MF 18×2 mm is a machine tap for producing metric fine internal threads in steels, malleable cast iron and long‑chip non‑ferrous metals, designed for through‑hole tapping in industrial production HSS‑Co for high wear resistance Form B straight flute for machine tapping 6H tolerance for accurate fit Suitable for steels up to 1000 N/mm² Consistent fine‑thread performance for production use The combination of HSS‑Co and a 6H tolerance ensures reproducible thread geometry and a secure mating fit in assemblies. In industrial tapping applications, the material selection provides improved wear resistance compared with standard HSS, extending tool life under sequence production. The DIN 374B design supports machine tapping with a straight flute, which stabilises chip formation when cutting through holes and reduces the risk of thread collapse. These attributes translate into fewer rejects and more predictable cycle times on CNC tapping heads or tapping attachments. Durable cutting geometry that reduces rework A Form B straight‑flute configuration with flank relief improves evacuation of long chips and promotes cleaner thread flanks, which helps to avoid burrs and reduces secondary operations. The tap's cutter geometry includes a chamfered lead for through‑hole threads, facilitating entry and reducing axial load during engagement. When working with medium‑strength steels (up to approximately 1000 N/mm²), temper cast iron and long‑chip non‑ferrous materials, this tool preserves dimensional accuracy while offering a balance between cutting performance and service life — a rational choice for repetitive production jobs. Production integration and practical handling benefits A shaft diameter of 14 mm provides robust clamping for machine tapping spindles and enhances concentricity during high‑speed operations. The tool’s standard compliance with DIN 13 and designation as a metric fine‑thread tap make it straightforward to specify within engineering drawings and procurement lists. The straight‑flute design and HSS‑Co composition reduce the frequency of tool changes, contributing to uninterrupted workflow. For workshops seeking a dependable industrial tap that fits established machining cells, the technical attributes support predictable throughput and simplified tool management. Contact Metav Werkzeuge today for ordering, technical matching or application advice on the TECWERK MF 18×2 mm machine tap — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 2000867237NW Label: Maschinengewindebohrer DIN 374B MF18x2mm HSS-Co 6H TECWERK Manufacturer: TECWERK Packing unit: 1 UID: 2000867237NW Facts Thread: MF 18×2 mm Tolerance: 6H Shaft diameter: 14 mm Special features Material: HSS‑Co Form: B (straight flute) Flank relief present Chamfered lead for through‑hole threads Standard: DIN 13 Suitable for steels up to approx. 1000 N/mm², temper cast iron, long‑chip non‑ferrous metals FAQ What materials is this tap suitable for? The TECWERK machine tap MF 18×2 mm is suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chip non‑ferrous metals as stated in the product specification. Which standard does the tap comply with? The tool is designed to DIN 13 for metric threads and conforms to the Form B (DIN 374B) straight‑flute machine tap specification. What tolerance class does the tap produce? This tap produces threads to a 6H tolerance, providing a precise internal thread fit for typical engineering assemblies. Is the tap intended for through‑hole threads or blind holes? The tap features a chamfered lead for through‑hole tapping, optimised for chip evacuation in penetrating applications. What is the shaft diameter for clamping? The tool has a shaft diameter of 14 mm, suitable for rigid clamping in machine spindles or collets. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

High-strength HSS‑Co construction and a straight‑flute Form B geometry ensure precise, repeatable metric fine threads with reduced wear. Benefit from a robust shank and the shearing chamfer for clean through‑threads; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Machine tap MF18 x 1.5 mm (DIN 374B) – HSS‑Co, 6H (TECWERK) The Machine tap MF18 x 1.5 mm (DIN 374B) is a straight‑flute machine tap designed for producing metric ISO fine threads in steels and long‑chipping non‑ferrous materials, optimised for industrial tapping. HSS‑Co for improved wear resistance Form B straight‑flute geometry Metric fine thread MF18×1.5, tolerance 6H Shank Ø 14 mm for secure machine mounting Consistent precision for fine‑thread production The TECWERK machine tap MF18 x 1.5 mm is built for repeatable accuracy when producing metric fine thread MF18×1.5 per DIN 13. The combination of tolerance 6H and a carefully ground tooth profile reduces dimensional deviation and minimises rework, which supports stable production yields. The HSS‑Co material contributes to a predictable wear pattern, enabling consistent thread quality over extended runs and lowering the risk of rejects. Durability and material versatility for workshop demands Constructed from HSS‑Co, the tap delivers enhanced hardness and heat resistance compared with standard high‑speed steel, improving service life under demanding conditions. It is suitable for steels up to 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals, making the tool a versatile choice for mixed‑material batches. Such material compatibility reduces tool changes and simplifies inventory planning for maintenance and production teams. Machine‑ready geometry that speeds up cycles The Form B straight‑flute design with a shear cutting edge is optimised for through‑hole tapping on machine tools; it promotes chip evacuation and steady cutting forces. Ground flank relief (flank grinding) lowers friction during thread forming and eases tool entry and exit, while the shank Ø 14 mm ensures rigid clamping in standard holders. These geometric attributes contribute to shorter cycle times and more predictable tapping operations on automated equipment. Process reliability and straightforward integration Tolerance conformity and hardened cutting edges support stable process windows and reduce the need for secondary operations. The tool’s geometry reduces chip-related interruptions in through‑hole applications, improving uptime. For integration into existing workflows, the tap requires standard machine mounting and appropriate cutting lubricant selection; when specified and used in line with machine capabilities, it reliably supports medium‑ to high‑volume threading tasks with minimal supervision. For reliable fine‑thread production choose the TECWERK HSS‑Co machine tap via Metav Werkzeuge; contact Metav Werkzeuge for tailored advice and to confirm suitability for specific materials or machines Technical data Article number: 2000867475NW Description: Machine tap DIN 374B MF18 x 1.5 mm HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: MF18 x 1.5 mm Tolerance: 6H Shaft Ø: 14 mm Suitable for materials up to approx. 1000 N/mm² tensile strength Features HSS‑Co material Form B, straight flutes Flanks ground (relief) Shear cutting edge for through‑threads Metric ISO fine thread (DIN 13) Suitable for malleable cast iron and long‑chipping non‑ferrous metals FAQ Which materials are suitable for this tap? The TECWERK machine tap MF18 x 1.5 mm (SKU 2000867475NW) is suitable for steels up to approx. 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals. What thread standard and tolerance does the tool produce? Threads are produced to metric ISO standard (DIN 13) with tolerance field 6H, matching common fine‑thread specifications. Is this tap intended for machine use or hand tapping? The tool is a machine tap with Form B straight‑flute geometry and shank Ø 14 mm, designed for secure machine mounting and automated tapping cycles. How does the cutting geometry improve chip control? The straight flutes and shear cutting edge promote continuous chip formation and evacuation in through‑hole operations, reducing chip jamming and improving cycle reliability. What advantages does HSS‑Co provide for thread production? The HSS‑Co composition increases wear resistance and thermal stability compared with standard HSS, extending tool life under higher cutting loads and temperatures. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high‑performance HSS‑Co construction, a vapour‑coated surface for extended wear resistance and a 40° right‑hand spiral that improves chip evacuation; order the TECWERK machine tap directly via Metav Werkzeuge or request technical advice from our consultants. Machine tap DIN 5156C Univ.G 1 in x 11 – TECWERK (HSS‑Co, vapour‑coated) Machine tap DIN 5156C Univ.G 1 in x 11 – TECWERK is a universal machine tap designed for producing Whitworth G pipe threads in blind holes, compliant with DIN ISO 228 HSS‑Co high‑performance cutting material Vapour‑coated for improved wear resistance Right‑hand spiral 40° for reliable chip control Suitable for steel and non‑ferrous materials 25 mm shank for stable machine mounting Precise thread form and consistent production results The combination of HSS‑Co and the universal Form C geometry delivers a stable cutting edge and predictable tool life in series production. The tap is manufactured to meet DIN ISO 228 for Whitworth G thread tolerances, which ensures interchangeability and reduces rework in assemblies. For machining blind holes the design provides reliable chip formation and evacuation, lowering the risk of thread defects and subsequent repair work. These attributes translate into consistent throughput and fewer production interruptions. Optimised chip flow and reduced breakage risk A right‑hand spiral 40° and flank relief ground geometry promote controlled chip flow away from the cutting zone, particularly important when working with sticky materials. The vapour‑coated surface improves lubricity and wear resistance, helping heat and friction management during high‑volume tapping. As a result, the tool sustains performance in mixed‑material workshops and decreases the incidence of tool breakage, which supports higher overall equipment effectiveness. Workshop compatibility and efficient tool handling With a 25 mm shank and universal type shank form, the tap integrates easily with standard tapping heads and machine tool holders, reducing changeover time. The tool is suitable for a broad range of materials including steel, stainless steel, spheroidal cast iron and non‑ferrous metals, making it a versatile choice for fabrication, maintenance and MRO tasks. The robust construction of the tap supports repeatable thread quality across batches, helping to streamline procurement and tool inventory for production planners. For robust Whitworth pipe threads with proven durability, order the TECWERK machine tap via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice. Technical data Article number: 2000867958NW Brand: TECWERK Standard: DIN 5156C Thread standard: DIN ISO 228 Facts Shank diameter: 25 mm Thread: G 1 in x 11 tpi Spiral angle: 40° Hole type: blind holes Special features Material: HSS‑Co Type: Universal (Form C) Coating: vapour‑coated Flanks: flank relief ground Marking: green ring Application: steel, stainless steel, spheroidal cast iron, non‑ferrous metals FAQ What materials is the TECWERK machine tap suitable for? The TECWERK machine tap (G 1 in x 11, SKU 2000867958NW) is suitable for steel, stainless steel, spheroidal cast iron and non‑ferrous metals as indicated in the technical data. Can this tap be used for blind holes and through holes? The tool is specifically designed for blind holes and provides chip control and geometry optimised for such applications; through‑hole use depends on machine setup and clamping. What does the vapour‑coated surface provide? The vapour‑coated finish enhances surface lubricity and wear resistance, improving tool life and reducing friction during high‑volume tapping operations. Which thread standard and pitch does the tap produce? The tap produces a Whitworth G pipe thread to DIN ISO 228 with a specification of G 1 in x 11 tpi, suitable for standard pipe fittings. Is the shank compatible with standard tapping holders? Yes, the 25 mm shank and universal form are intended for stable mounting in standard machine tool holders and tapping heads. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high wear resistance, universal applicability and a HARDLUBE surface finish for dependable machine tapping. Order the tap directly via Metav Werkzeuge or consult Metav's specialists for application advice and swift supply. TECWERK Machine Tap DIN 371B M2.5 x 0.45 — HSS‑Co PM, HARDLUBE, 2xD The Maschinengewindebohrer DIN371B Univ.M2,5x0,45mm HSS‑Co PM HARDLUBE DIN371 2xD TW is a universal machine tap designed for reliable metric ISO threading in a wide range of materials, suitable for production and workshop environments HSS‑Co PM for high wear resistance HARDLUBE coating for extended tool life Universal Form B for diverse materials Consistent ISO metric threads for serial production The HSS‑Co PM composition combined with the specified geometry ensures repeatable M2.5 x 0.45 metric threads to DIN 13 Blatt 1, making the tool suitable for cycle‑oriented machine tapping. The design conforms to DIN 371 dimensions, which supports predictable engagement and removal forces in machine‑centred workflows. Reliability in thread form reduces rework and supports a steady production flow. Broad material compatibility reduces tool changes The tap's Form B / universal geometry and flute design permit threading operations in a wide spectrum of workpiece materials, including conventional steel, stainless steel (VA), aluminium and copper alloys, as well as cast components. The incorporated peel chamfer (Schälanschnitt) is optimised for through‑hole threading, improving chip evacuation and reducing the risk of thread deformation during machining across these substrates. HARDLUBE coating and optimised cutting geometry for longevity A low‑friction HARDLUBE surface finish combined with an optimized edge rounding and cutting geometry reduces built‑up edge and wear under continuous operation. This pairing prolongs tool life and maintains dimensional consistency over longer tool cycles, which benefits shops seeking fewer tool changes and more uptime. The straight‑flute concept supports consistent chip formation in through‑hole conditions. Machine compatibility and measured handling features Constructed to DIN 371 length with a working length of 2xD, the tap has a shank Ø 2.8 mm and a right‑hand cutting direction suitable for standard machine holders. The tolerance class 6HX is specified for metric ISO threads and supports standard fit requirements in assembly processes. The combination of these dimensions and standards eases integration into existing tapping setups and tooling systems. For technical advice or to secure a supply of TECWERK machine taps with HARDLUBE finish, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or telephone +49 2822 7131930 — specialists will assist with selection and delivery. Technical Data Article number: 2000867976NW Label: Maschinengewindebohrer DIN371B Univ.M2,5x0,45mm HSS‑Co PM HARDLUBE DIN371 2xD TW Manufacturer: TECWERK Packaging unit: 1 Data Thread: M2.5 x 0.45 Length: 2xD (DIN 371) Shank diameter: 2.8 mm Tolerance: 6HX Cutting direction: right Special features Material: HSS‑Co PM Coating: HARDLUBE Flute type: straight flutes Form: B, universal Cutting geometry: optimized edge rounding and geometry Chamfer: peel chamfer for through threads Standards: DIN 371; DIN 13 Blatt 1 Suitable for: steel, stainless steel (VA), aluminium alloys, copper alloys, cast components FAQ What material is the tap made of? The tap is manufactured from HSS‑Co PM, offering enhanced wear resistance compared with conventional high‑speed steels. Which thread size and standard does the tap produce? This machine tap produces an M2.5 x 0.45 metric ISO thread to DIN 13 Blatt 1, with dimensions per DIN 371. For which materials is the tool suitable? The tap is suitable for steel, stainless steel (VA), aluminium and copper alloys, as well as cast components, thanks to its universal Form B geometry. What is the shank diameter and length specification? The tap has a shank Ø 2.8 mm and a working length designed as 2xD in accordance with DIN 371. What does the HARDLUBE coating provide? The HARDLUBE coating reduces friction and wear, supporting longer tool life and more consistent thread quality during extended machining cycles. Does the tap have a special chamfer for through threads? Yes, the tool includes a peel chamfer for through‑hole threading to improve chip evacuation and reduce thread distortion. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund