Reliable thread production is achieved through the combination of HSS‑Co construction, a Whitworth G 3/4" x 14 thread form and the right‑hand 40° spiral geometry, delivering consistent results in steels up to 1000 N/mm²; order the TECWERK machine tap directly via Metav Werkzeuge or consult the specialists for application support. Machine tap DIN 5156C G 3/4" x 14 HSS‑Co (ISO 228) — TECWERK The Machine tap DIN 5156C G 3/4" x 14 HSS‑Co (ISO 228) is a right‑hand spiral pipe‑thread tap designed for forming Whitworth G threads in blind holes and medium‑strength steels. HSS‑Co cobalt steel for extended tool life Whitworth G 3/4" x 14 pipe thread Right‑hand 40° spiral, Form C flanks honed For blind holes; works in steels up to 1000 N/mm² Consistent thread quality for industrial production Built from HSS‑Co, this tapping tool prioritises wear resistance and dimensional stability, which translates into repeatable thread quality across production runs. Compliance with DIN ISO 228 ensures that the produced pipe threads match established Whitworth standards, simplifying assembly and reducing rework. The combination of a hardened cobalt matrix and honed flank geometry results in controlled cutting behaviour and improved surface finish, making the component threads suitable for sealed pipe connections and mechanical fittings. Reliable performance in demanding materials and blind holes The tap is configured in Form C with a 40° spiral, a geometry that promotes chip control during tapping operations, particularly in blind‑hole threading. It is specified for use in steels up to approximately 1000 N/mm² and in temper‑cast iron, which provides clear guidance for material selection on the shop floor. Because the design is optimised for blind holes, chip evacuation and breakage risk are reduced, enhancing process reliability and lowering scrap rates for internal thread production. Practical handling and integration benefits A 20 mm shaft provides a rigid connection to common holders and reduces run‑out during machine tapping, supporting consistent thread form and longer tool life. The honed flanks contribute to smoother engagement and less back‑taper on the thread, which benefits sealing surfaces. From a workflow perspective, the robust geometry and standardised thread form mean fewer tool changes and faster setup times in batch production, improving overall throughput while maintaining high quality. For applications requiring dependable Whitworth pipe‑threading performance, opt for the TECWERK G 3/4" x 14 HSS‑Co machine tap — procure through Metav Werkzeuge for reliable supply from Emmerich and expert application advice; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867514NW Product: Machine tap DIN 5156C G 3/4" x 14 HSS‑Co ISO 228 Manufacturer: TECWERK Package unit: 1 Core data Thread: G 3/4" x 14 TPI Shank diameter: 20 mm Material application: steels up to approx 1000 N/mm² Spiral: right‑hand 40° Standard: DIN ISO 228 Special features Material: HSS‑Co Form: C Flanks honed For blind holes Whitworth pipe thread FAQ What thread form does the tap produce? The tap produces a Whitworth pipe thread to ISO 228, specifically G 3/4" x 14, suitable for standard pipe fittings and sealed connections. Which materials can be machined with this tap? The TECWERK tap is suitable for steels up to approximately 1000 N/mm² and for temper‑cast iron, making it appropriate for many industrial applications. Is the tool suitable for blind‑hole threading? Yes — the right‑hand 40° spiral and honed flanks are designed to aid chip control in blind holes, reducing the likelihood of chip jamming and breakage. What is the shank size and how does it affect clamping? The tool has a 20 mm shank diameter, providing a rigid interface with standard toolholders to minimise run‑out and maintain thread accuracy. Which standard does the product comply with? The tap conforms to DIN ISO 228 for Whitworth pipe threads, ensuring compatibility with established fittings and gauges. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine the durable HSS‑Co core with TiN coating and ISO2 (6H) tolerance to achieve consistent, long‑lasting thread production with minimal rework; order the tool directly via Metav Werkzeuge or request specialist advice from our consultants. Machine tap DIN 376C M27 x 3mm HSS‑Co TiN (6H) — TECWERK The Machine tap DIN 376C M27 x 3mm is a machine threading tap designed for blind‑hole use in medium‑strength steels, delivering high wear resistance and ISO‑class accuracy for industrial workshop applications HSS‑Co construction for high toughness TiN coating for extended tool life ISO2 (6H) tolerance for precise threads Suitable for blind holes in steels ≤1000 N/mm² Durable cutting performance for demanding production Manufactured from HSS‑Co, this tap combines toughness with thermal resilience to withstand continuous machine tapping in production environments. The TiN coating reduces friction and increases tool life, which translates directly into fewer tool changes and less downtime on the machine. The right‑hand spiral at 40° and flanks honed reduce cutting forces and improve chip formation, making the tool particularly effective where service life and consistent cycle times are priorities. Accurate threads that lower rejection rates The tool is manufactured to DIN 13 (sheet 1) standards with ISO2 (6H) tolerance, ensuring repeatable thread geometry and reliable assembly fit. This level of accuracy reduces the need for reworking parts or second operations, improving first‑pass yield. The metric M27 x 3 mm specification meets common industrial requirements, so thread compatibility with standard fasteners is assured and assembly processes remain predictable. Secure clamping and efficient chip control for blind holes A robust shank Ø 20 mm supports secure clamping in machine tool holders, minimising run‑out and maximising concentricity during high‑speed tapping. The geometry and helix angle are tuned for blind‑hole applications, enhancing chip evacuation away from the cutting zone and lowering the risk of chip packing. Rated for steels up to 1000 N/mm², the tap balances cutting performance with longevity under typical workshop loads. Supply reliability and practical workshop support Sourced from a trusted supplier network, the tool is supported by a logistics and service approach tailored to workshops and industrial users. Metav’s positioning as a precision partner ensures access to technical information, availability from central stock and guidance for application selection. The combination of proven materials and standards‑based manufacturing provides a dependable basis for repeatable production results. Contact Metav Werkzeuge today for tailored advice or to secure this TECWERK machine tap with HSS‑Co and TiN coating — local stock in Emmerich and technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867898NW SKU: 2000867898NW Packaging unit: 1 Manufacturer: TECWERK Facts Thread size: M27 x 3 mm Shank diameter: 20 mm Helix angle: 40° Tolerance: ISO2 (6H) Material strength capacity: up to 1000 N/mm² Special features HSS‑Co material TiN‑coated Form C (DIN 376C) Flanks honed Right‑hand spiral For blind‑hole threads Metric ISO thread (DIN 13 sheet 1) FAQ What materials can this tap machine threads in? The TECWERK machine tap M27 x 3 mm is specified for use in steels up to 1000 N/mm² and is designed for reliable performance in typical workshop steels. Is this tap suitable for blind‑hole applications? Yes — the tool is made for blind‑hole threading, with a 40° right‑hand spiral and geometry optimised to improve chip evacuation in closed cavities. Which tolerance class does the tap deliver? Threads are produced to ISO2 (6H) tolerance in accordance with DIN 13 sheet 1, offering dimensional consistency for standard metric fasteners. What are the key wear‑resistance features? The combination of HSS‑Co substrate and TiN coating reduces friction and increases wear resistance, extending tool life under continuous machine operation. What shank size is required for clamping? The tap has a 20 mm shank diameter to ensure secure clamping and reduced run‑out in machine holders. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co for high thermal resistance, the Form B straight‑flute geometry for consistent chip formation, and the precise 6H tolerance for reliable fine threads; order the Maschinengewindebohrer DIN 374B MF20x2mm HSS‑Co 6H TECWERK directly via Metav Werkzeuge or ask the consultants for tailored procurement advice. Maschinengewindebohrer DIN 374B MF20x2mm HSS‑Co 6H – Machine tap with HSS‑Co and straight flutes by TECWERK Maschinengewindebohrer DIN 374B MF20x2mm HSS‑Co 6H is a machine tap designed for creating metric ISO fine threads MF 20 × 2 mm in a wide range of engineering materials HSS‑Co cobalt high‑speed steel construction Form B straight flute geometry Metric ISO fine thread MF 20×2 mm Shank Ø 16 mm for stable machine clamping High‑performance threads for demanding materials The tap is made from HSS‑Co, a cobalt‑alloy high‑speed steel that boosts heat resistance and maintains cutting hardness under higher temperatures. This makes the tool particularly suited for machining steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. The choice of material translates into a longer useful life and fewer tool changes on the production line, supporting a steady output and reduced downtime. Consistent thread quality and machine compatibility Built to DIN 374B with Form B geometry and a 6H tolerance class, the tool ensures repeatable, high‑quality fine threads that meet ISO requirements. The straight flute design and flank relief ground cutting edges produce accurate thread profiles while simplifying chip evacuation in many through‑hole operations. The shank Ø 16 mm provides secure clamping in common machine tool holders, reducing runout and improving thread concentricity for serial production. Efficient chip control and lower process forces Equipped with a dedicated cutting‑edge design for through threads, the tool features a specialised cutting entry that reduces torque and prevents jamming when creating full‑length threads through workpieces. This through‑thread optimisation and the straight flute layout help to manage chips effectively in long‑chipping materials, which in turn reduces rework and contributes to a cleaner machining environment. The result is more efficient cycles and measurable savings in operator time. For procurement and delivery of the TECWERK machine tap, contact Metav Werkzeuge for expert advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 2000867241NW Product name: Machine tap DIN 374B MF 20 x 2 mm HSS‑Co 6H (TECWERK) Manufacturer: TECWERK UID: 2000867241NW Facts Thread size: MF 20 × 2 mm (metric ISO fine thread) Standard: DIN 374B Tolerance: 6H Shank diameter: 16 mm Packaging unit: 1 Special features Material: HSS‑Co (cobalt high‑speed steel) Form B, straight flute (geradegenutet) Flank relief ground (Flanken hinterschliffen) Cutting geometry for through threads (mit Schälanschnitt für Durchgangsgewinde) Suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals FAQ What thread standard and tolerance does this tap produce? The Maschinengewindebohrer is made to DIN 374B and cuts a metric ISO fine thread MF 20 × 2 mm with a 6H tolerance class, ensuring compatibility with standard fine‑thread components. Which materials can be machined with this tap? This TECWERK tap is suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals, thanks to its HSS‑Co construction and dedicated cutting geometry. What are the clamping requirements for stable operation? Secure clamping with a holder matching the 16 mm shank diameter is recommended to minimise runout; this ensures the tap maintains the intended thread form and surface finish throughout a production run. How does the cutting geometry affect chip formation? The straight flute and the specially designed cutting entry for through threads reduce torque and promote orderly chip evacuation, lowering the risk of breakage and extending tool life. Is this tap suitable for automatic machine tapping? Yes. The machine‑grade shank and the Form B straight‑flute design make the tool appropriate for automated tapping cycles in standard machine tool holders. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co material, Form C spiral geometry and precise tolerance 6H for efficient, repeatable fine-thread production; order or consult Metav Werkzeuge for tailored application support. TECWERK machine tap DIN 374C MF 20 x 1.5 mm HSS‑Co 6H The TECWERK machine tap MF 20 x 1.5 mm is a DIN 374C-form machine thread tap for producing metric ISO fine threads in blind holes, optimised for industrial machining HSS‑Co cobalt high‑speed steel construction Form C, 40° right‑hand spiral Flank‑honed cutting edges for smooth finish Metric ISO fine thread MF, tolerance 6H Suitable for blind holes; shaft Ø 16 mm High‑performance threading with cobalt HSS for industrial use The HSS‑Co composition provides elevated red hardness and wear resistance compared with conventional high‑speed steels, making the tool suitable for sustained machining cycles. The combination of Form C geometry and a 40° right‑hand spiral promotes reliable chip control when producing MF 20 x 1.5 mm metric fine threads in blind holes. In practice, this design reduces the risk of chip congestion, which in turn decreases rework and machine downtime, supporting a predictable production rhythm. Consistent thread quality and dimensional reliability Flank honing (flank‑honed cutting edges) improves the surface finish of the internal thread and lowers the likelihood of burr formation at the thread crest. The tolerance 6H conforms to the DIN 13 specification for internal threads and ensures a standardised fit with external threads of the corresponding tolerance class; this supports interchangeability and mating accuracy in assemblies. For technicians and production engineers, the result is repeatable thread geometry and fewer quality rejects. Material compatibility and secure clamping for machine operation The geometry and material make the tool suitable for a range of substrates, including steels up to approximately 1,000 N/mm² tensile strength, malleable cast iron, and long‑chipping non‑ferrous metals. The solid shaft Ø 16 mm enables rigid clamping in machine tool holders, improving axial stability and reducing chatter during tapping cycles. For machine shops seeking a durable solution for fine‑pitch internal threading, this specification balances cutting performance with operational robustness. Secure the TECWERK HSS‑Co machine tap via Metav Werkzeuge for reliable fine threading in industrial applications — contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 2000867490NW Designation: Machine tap DIN 374C MF 20 x 1.5 mm, HSS‑Co, 6H (TECWERK) Packing unit: 1 Facts Shank Ø: 16 mm Spiral angle: 40° right‑hand Material strength capacity: steels up to approx. 1,000 N/mm² Special features HSS‑Co construction Form C geometry Flank‑honed cutting edges Metric ISO fine thread MF per DIN 13 For blind holes Suitable for temper cast iron and long‑chipping non‑ferrous metals FAQ What materials can be machined with the TECWERK machine tap MF 20 x 1.5 mm? The TECWERK machine tap is suitable for steels up to approx. 1,000 N/mm² tensile strength, malleable cast iron and long‑chipping non‑ferrous metals. Is the tap suitable for blind holes or through holes? The tool’s Form C geometry with a 40° spiral is designed for blind holes, making the TECWERK MF 20 x 1.5 mm tap appropriate where chip evacuation out of the hole is required. What does the tolerance class 6H mean for assembly fit? Tolerance 6H is an internal thread class per DIN 13 that guarantees a standard fit with corresponding external threads, ensuring predictable mating and interchangeability in assemblies produced with the TECWERK tap. How does flank honing affect thread quality? Flank honing refines the cutting edges to reduce burrs and improve the surface finish of the internal thread, delivering cleaner threads and fewer post‑machining operations with the TECWERK tap. Which shank diameter is required for correct clamping of this tap? The tool is supplied with a shank Ø 16 mm, allowing secure clamping in compatible machine holders for stable tapping cycles using the TECWERK MF 20 x 1.5 mm tap. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of wear‑resistant HSS‑Co construction, precise 6H tolerance and a through‑hole cutting chamfer for consistent fine‑thread performance; order the thread cutter via Metav Werkzeuge or consult their specialists for application advice. TECWERK machine tap DIN 374B MF20×1.5 HSS‑Co, Form B TECWERK machine tap DIN 374B MF20×1.5 HSS‑Co, Form B is a through‑hole tapping tool engineered for metric ISO fine threads in steels and long‑chipping non‑ferrous metals HSS‑Co for higher heat resistance Form B straight flutes for reliable chip evacuation Metric ISO fine thread MF20×1.5, tolerance 6H Shank Ø16 mm for standard toolholders Robust alloy for long tool life and consistent results The HSS‑Co composition provides increased red hardness and wear resistance compared with standard high‑speed steel, which is beneficial where sustained cutting temperatures occur. Specified to work in steels up to approx. 1000 N/mm², as well as temper cast iron and long‑chipping non‑ferrous metals, the material choice reduces flank wear and extends service intervals. Combined with the DIN 374B designation and 6H tolerance, this configuration supports repeatable, industry‑compliant thread quality and interchangeability in precision assemblies. Geometry designed for reliable chip control and thread form The Form B geometry with straight flutes and ground flanks helps maintain thread profile accuracy while easing chip flow in through‑hole applications. The integrated through‑hole chamfer (Schälanschnitt) is tailored for cutting exit threads cleanly, which reduces burr formation and post‑process finishing. With the MF20×1.5 thread profile, the tool delivers fine‑pitch accuracy for components that demand close fitment, and the shank Ø16 mm ensures compatibility with common collets and toolholder systems in production environments. Practical benefits for workshop and production environments Incorporating this machine tap into a production line or workshop reduces rework by delivering consistent thread tolerances and cleaner exits on through holes. The tool’s specifications favour batch and single‑part manufacture where fine threads and interchangeability are required. Clear technical definition—material, tolerance and geometry—simplifies process planning and contributes to predictable cycle times. For complex applications or confirmation of fitment in a specific machine, Metav Werkzeuge offers technical guidance to ensure the threading tool integrates seamlessly with existing tooling systems. Choose the TECWERK HSS‑Co machine tap for durable, precise fine threads and contact Metav Werkzeuge in Emmerich for procurement or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000867476NW Manufacturer: TECWERK Packaging unit: 1 Core specifications Thread size: MF20×1.5 Tolerance: 6H Material: HSS‑Co Shank diameter: 16 mm Special features DIN 374B Form B, straight‑fluted Ground flanks Through‑hole chamfer for exit threads Suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals FAQ What materials is this tap suitable for? The TECWERK machine tap DIN 374B MF20×1.5 HSS‑Co 6H (SKU 2000867476NW) is specified for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. Why is the 6H tolerance important? A 6H tolerance ensures a consistent internal thread fit according to metric ISO standards, supporting interchangeable assemblies and accurate mating with standard fasteners. Is the tool suitable for through‑hole threading? Yes; the integrated through‑hole chamfer is designed to produce clean exit threads and reduce burrs on through holes. What does Form B and straight flutes mean for production? Form B with straight flutes improves chip evacuation in through‑hole operations and helps to preserve the thread profile during continuous or series production. Which holders fit the tap? The shank Ø16 mm allows use with common collets and standard toolholders; adaptors can be used where different interfaces are required. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co construction, Form B straight flutes and a 16 mm shank to produce consistent metric fine threads in demanding materials while reducing rework and downtime. Order the machine tap directly via Metav Werkzeuge or consult our advisers for application-specific guidance. TECWERK Machine Tap DIN 374B MF20×1 HSS‑Co 6H – Form B straight flutes, 16 mm shank A TECWERK machine tap DIN 374B MF20×1 HSS‑Co 6H engineered for efficient production of metric fine threads in steels and long‑chipping non‑ferrous materials HSS‑Co solid construction for wear resistance Form B straight flutes for controlled chip evacuation Metric ISO fine thread per DIN 13, tolerance 6H Shank Ø 16 mm for stable mounting Reliable fine threads for assembly integrity The combination of HSS‑Co material and a fine, ISO‑metric thread form delivers reliable, repeatable results where thread tolerance matters. The tool is specified for metric ISO fine thread MF and manufactured to DIN 13 with a 6H tolerance, so mating parts fit predictably and assemblies maintain clamp‑up without additional rework. In practical terms, this means fewer rejects and a steadier production process when producing precision fastenings for machine components or instrumentation parts. Reduced cycle time through improved chip control and toughness Built to Form B with straight flutes, the tap offers predictable chip formation and evacuation for through threads, aided by the specialised peel chamfer on the cutting end. The HSS‑Co alloy provides increased heat resistance and toughness compared with plain high‑speed steel, which helps maintain cutting geometry during higher feed rates or interrupted cuts. The result is a balance between cutting performance and tool life when machining steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals, supporting faster cycles without compromising thread quality. Practical workshop compatibility and quality assurance With a 16 mm shank, this tap integrates easily into standard machine holders and reduces runout risk in automated spindles and tool posts. The tool’s flank relief and precision grind help ensure consistent starts and reduced torque peaks during tapping, which benefits both manual and CNC workflows. Supplied as a single item in the packaging unit, the component is subject to Metav’s quality filtering in Emmerich, where every delivery is checked for conformity — a practical advantage for workshops seeking dependable measuring and tooling partners. Discuss application details and request supply of the TECWERK HSS‑Co machine tap via Metav Werkzeuge; Metav’s advisers in Emmerich can confirm fitment and delivery options Technical Data Article number: 2000867239NW SKU/UID: 2000867239NW Brand: TECWERK Packaging unit: 1 Facts Thread size: MF20×1 mm Tolerance field: 6H Shank diameter: 16 mm Material strength rating: up to ≈1000 N/mm² Special features HSS‑Co cutting material Form B, straight flutes Flank relief (flanken hinterschliffen) Peel chamfer for through threads Metric ISO fine thread, DIN 13 Suitable for steels, temper cast iron and long‑chipping non‑ferrous metals FAQ Which materials is this tap suitable for? This TECWERK machine tap DIN 374B MF20×1 HSS‑Co 6H is suitable for steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals What thread standard and tolerance does it produce? The tool produces a metric ISO fine thread according to DIN 13 with a tolerance field of 6H, as specified for the TECWERK MF20×1 HSS‑Co tap (SKU 2000867239NW) Is the tap designed for through‑hole threads? Yes, the tap includes a specialised peel chamfer for through threads to aid chip evacuation and produce clean entries What are the mounting requirements for this tap? The tap has a 16 mm shank, so use an appropriate collet or toolholder rated for that diameter to ensure stable clamping and low runout with the TECWERK machine tap What advantages does the HSS‑Co grade provide? The HSS‑Co composition offers improved heat resistance and toughness compared with conventional HSS, giving longer tool life and greater stability under elevated cutting temperatures when using the TECWERK MF20×1 tap Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co PM cutting material, HARDLUBE surface treatment and a Form C spiral geometry to achieve consistent thread quality in blind holes; order the tap through Metav Werkzeuge for fast processing or consult Metav’s product specialists for application-specific advice. Maschinengewindebohrer DIN 376C Univ. M20 x 2.5 mm – Machine thread tap, HSS‑Co PM, HARDLUBE (TECWERK) Maschinengewindebohrer DIN 376C Univ. M20 x 2.5 mm is a universal machine tap designed for producing metric ISO threads in blind holes across a broad range of engineering materials Machine thread tap M20 x 2.5, universal design HSS‑Co PM for high wear resistance HARDLUBE coating for reduced friction Suitable for blind holes and multiple materials Consistent thread quality and process efficiency The tap combines HSS‑Co PM (powder‑metallurgy cobalt high‑speed steel) with an optimised cutting geometry to deliver reliable thread formation under industrial conditions. The M20 x 2.5 metric specification and compliance with DIN 376 ensure compatibility with standard tapping cycles, while the tolerance 6HX provides the required allowance for assembly. Because the tool is produced to the DIN length and features a 2×D flute length, chip control and evacuation are tuned for blind‑hole tapping, reducing the risk of chip build‑up and rework. These technical choices translate into fewer rejects and a steadier production flow. Longer tool life and smoother machining A HARDLUBE surface finish reduces adhesion and wear, lowering cutting forces and heat generation during threading. The use of HSS‑Co PM increases red‑hardness and abrasion resistance compared with conventional HSS, which benefits longer runs and intermittent stainless‑steel operations. The tap’s optimised edge rounding and cutting geometry improve entry behaviour and reduce vibration, resulting in cleaner threads and extended service intervals. Where process reliability matters, these attributes lower overall machining costs by extending tool life and stabilising cycle times. Versatile application range and handling notes Designed as a universal solution, the tool is suitable for machining in steel, stainless steel, aluminium and copper alloys as well as cast materials. The tap has a shaft Ø 16 mm and a right‑hand spiral 40°, making it compatible with standard machine holders and automatic tapping heads. For blind holes, the spiral geometry aids chip transport back toward the flutes, which is particularly helpful in less accessible bores. When selecting cutting parameters, follow material‑specific speed and feed recommendations for HSS‑Co PM tools and consider modest pecking cycles in deep or difficult holes to preserve the cutting edge. Practical advantages for workshop and production environments The compact design to DIN 376 and the universal form make this tap a convenient choice for mixed production and maintenance inventories. Its features reduce the likelihood of thread failure in assembly and lower scrap rates, improving overall operational efficiency. Where workshops consolidate tooling, a single, versatile tap that performs across several materials reduces inventory complexity and simplifies order handling. The result is a straightforward improvement in availability and uptime for daily production tasks. Contact Metav Werkzeuge for an application assessment or to request a tailored delivery from Emmerich; technical advice is available by phone or email through Metav’s specialist team Technical data Article number: 2000867999NW Description: Maschinengewindebohrer DIN 376C Univ. M20 x 2.5 mm HSS‑Co PM HARDLUBE 2×D TW Manufacturer: TECWERK Packaging unit: 1 UID: 2000867999NW Numbers / Core technical data Thread: M20 x 2.5 Flute length: 2×D Shank diameter: 16 mm Spiral angle: 40° (right‑hand) Standard: DIN 376 Tolerance: 6HX Designs / Special features Material: HSS‑Co PM (powder metallurgy cobalt high‑speed steel) Coating: HARDLUBE Form: C, Type UNIVERSAL Optimised edge rounding and cutting geometry For blind holes (sacklochgewinde) Metric ISO thread to DIN 13 Sheet 1 Universal use in steel, stainless steel, aluminium and copper alloys and cast Cutting direction: Right FAQ What thread form and size does this tap produce? The tap produces a metric M20 x 2.5 ISO thread in accordance with DIN 376, with a tolerance field of 6HX for standardised fit. Is the tool suitable for blind‑hole tapping? Yes, the design is specifically indicated for blind holes; the 2×D flute length and right‑hand spiral help evacuate chips from blind bores. Which materials can be machined with this tap? The tool is intended for universal use in steel, stainless steel, aluminium, copper alloys and cast materials, benefiting from the HSS‑Co PM substrate and HARDLUBE coating. What are the key wear‑resistance features of the tap? Wear resistance derives from the HSS‑Co PM base material and the HARDLUBE surface treatment, together with an optimised cutting geometry for improved tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co material for sustained cutting performance and the 6H tolerance for an accurate fit, ensuring consistent thread quality in demanding workshops; order the tap directly via Metav Werkzeuge or consult our specialists for application advice. Machine tap DIN 374B MF22×1.5 HSS‑Co 6H (TECWERK) The machine tap MF22×1.5 HSS‑Co 6H by TECWERK is a DIN‑compliant tool for producing metric ISO fine threads in steels, temper cast iron and long‑chipping non‑ferrous metals. Cobalt HSS for elevated heat resistance Form B straight flutes for reliable chip evacuation Tolerance 6H for precise metric fine threads Shank Ø 18 mm for stable machine clamping Accurate fine threads for repeatable assembly performance Designed for fine metric threads, this machine tap delivers repeatable geometry thanks to its MF22×1.5 specification and 6H tolerance. The combination of a defined thread form and DIN conformity reduces rework and minimises assembly variation, which translates into measurable production savings. The use of HSS‑Co supports maintained cutting edges under thermal load, so the process remains stable during series production and interrupted cycles. Robust construction that supports faster machining cycles Manufactured in HSS‑Co and built to Form B with straight flutes, the tool balances toughness with predictable chip flow. The straight‑flute design promotes controlled chip evacuation in continuous machining of steels up to ca. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous alloys. As a result, cycle times are optimised and the risk of tap breakage is reduced, providing clear operational benefits for production environments where uptime matters. Precision features that simplify set‑up and tool handling The tool is supplied with a shank Ø 18 mm, enabling secure clamping in standard toolholders and reducing run‑out during machining. The relieved/flank‑ground cutting edges and the dedicated cutting chamfer for through threads help to reduce thread burr and facilitate entry, which is particularly useful when working with tight‑tolerance components. These design choices lower scrap rates and make process validation simpler for quality control teams. Application suitability and machining recommendations This tap is intended for use in turning and machining centres or tapping heads where rigid support and appropriate spindle alignment are provided. It is particularly suitable for metric fine threads in medium‑strength steels and certain non‑ferrous materials; users should verify machine spindle concentricity and use appropriate coolant and tapping cycles to extend tool life. For operations that require a secure standard fit and consistent thread form, the TECWERK tap offers a pragmatic combination of material and geometry. Discuss application requirements and secure supply through Metav Werkzeuge for fast delivery from Emmerich – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867477NW Manufacturer: TECWERK Packaging unit: 1 Data Thread: MF22×1.5 Standard: DIN 374B; DIN 13 Tolerance: 6H Shank diameter: 18 mm Suitable material strength: steels up to ca. 1000 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Design: Form B, straight flutes Cutting geometry: flank ground (relieved flanks) Chamfer: cutting chamfer for through threads Applications: steels, temper cast iron, long‑chipping non‑ferrous metals FAQ What thread size and standard does this tap produce? The TECWERK machine tap produces an MF22×1.5 metric ISO fine thread and conforms to DIN 374B and DIN 13 standards. Which materials can be machined with this tap? The tap is suitable for machining in steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals when used with correct process parameters. What does the 6H tolerance mean for assembled parts? A 6H tolerance ensures a standard internal thread tolerance class for secure and repeatable fits in metric fine threaded assemblies produced with this tap. How should the tool be clamped in the machine? Use a rigid holder that accepts a shank Ø 18 mm to minimise run‑out; stable clamping improves thread quality and tool life when using the TECWERK tap. Is this tap suitable for through threads only? The tap features a cutting chamfer designed for through threads, but it can be used in suitable blind hole strategies when appropriate pecking or cycle adjustments are applied. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from precise thread form, durable HSS‑Co construction and secure clamping with the 18 mm shank for reliable blind‑hole tapping; order the TECWERK machine tap MF22×1.5 HSS‑Co directly via Metav Werkzeuge or ask our consultants if needed TECWERK machine tap MF22×1.5 HSS‑Co — DIN 374C, right‑hand 40° spiral A TECWERK machine tap MF22×1.5 HSS‑Co designed for machining metric fine threads in blind holes in steels up to approx. 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals HSS‑Co construction for high wear resistance Right‑hand 40° spiral for blind holes DIN 374C, metric fine thread MF 22×1.5 Shank Ø 18 mm for secure clamping Accurate fine threads with proven DIN specification The tool is manufactured to DIN 374C and produces a metric fine thread (MF 22×1.5) with a 6H tolerance that ensures consistent fit and interchangeability. Such standard conformity means threads are comparable across assemblies and replacement parts, reducing rework and inspection time. The cobalt alloy in HSS‑Co increases red hardness and wear resistance, so thread form is retained over longer production runs, which contributes to predictable cycle times and lower tool change frequency. Reliable blind‑hole tapping thanks to spiral geometry Equipped with a right‑hand 40° spiral, the tap actively evacuates chips from the cutting zone when used in blind holes; this significantly reduces chip jamming and the risk of thread damage. The flanks are relief‑ground, improving chip control and leaving clean flank surfaces on the thread form. For applications where chip evacuation and surface integrity are essential, this spiral‑flute design is particularly effective, and the tool is optimised for blind‑hole use rather than through threading. Robust shank and compatibility with common workshop setups A shank Ø 18 mm provides a stable connection to standard toolholders and reduces vibration during tapping. The combination of shank diameter and the DIN specification allows secure clamping in end‑mill holders or collet chucks commonly used in production cells. The cutting geometry and material specification make the tap suitable for operation in steels up to approx. 1000 N/mm², tempered cast iron and many long‑chipping non‑ferrous alloys, balancing cutting performance with tool life in mixed‑material job shops. Practical benefits for production and maintenance planning Using a cobalt high‑speed steel tap with defined spiral and relief features reduces the incidence of broken taps and rework, improving first‑pass yield. The tool’s construction supports higher temperatures at the cutting edge, allowing slightly more aggressive feeds in many cases without sacrificing thread quality. For buyers and production planners this translates into fewer tool changes, less downtime and a demonstrable impact on throughput. Technical advisors at Metav Werkzeuge can confirm material compatibility and recommended spindle speeds for specific machining centres. Contact Metav Werkzeuge for tailored technical advice and ordering — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com; Metav Werkzeuge offers proximity from Emmerich and can confirm availability and delivery options Technical Data Article number: 2000867491NW Item: Machine tap DIN 374C MF22×1.5 HSS‑Co Manufacturer: TECWERK Packaging unit: 1 Data Thread: M22×1.5 (metric fine thread MF) Shank diameter: 18 mm Spiral angle: 40° right‑hand Tolerance: 6H Suitable material strength: up to approx. 1000 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Form C (DIN 374C) Flank relief / undercut flanks Designed for blind‑hole threads Complies with DIN 13 Suitable for malleable cast iron and long‑chipping non‑ferrous metals FAQ What thread does this tap produce and to which standard does it conform? The tap produces a metric fine thread M22×1.5 and is manufactured to DIN 374C, ensuring the thread form and tolerance class 6H meet standardised requirements. Which materials can be machined with this tool? This TECWERK machine tap MF22×1.5 HSS‑Co is specified for steels up to approx. 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals; the cobalt alloy improves performance in tougher materials. Is this tap suitable for blind holes or through holes? The spiral‑flute design with a 40° right‑hand spiral is optimised for blind‑hole applications, as chip evacuation is directed away from the cutting edge to reduce packing. What clamping arrangements are recommended for stable operation? The shank Ø 18 mm is intended for secure clamping in collets or holder systems common in production environments to minimise runout and vibration. How does the HSS‑Co material affect tool life and cutting parameters? Cobalt alloyed HSS retains hardness at elevated temperatures, allowing more aggressive cutting in many cases and extending tool life compared with standard HSS for comparable operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co wear resistance, precise M22 x 2 mm metric fine thread form and a robust shank Ø 18 mm for consistent in‑house production; order the TECWERK tap directly via Metav Werkzeuge or ask their consultants for technical advice. TECWERK machine tap M22 x 2 mm (DIN 374B) — HSS‑Co, 6H TECWERK machine tap M22 x 2 mm (DIN 374B) is a straight‑fluted HSS‑Co tool designed for producing metric ISO fine internal threads in through‑holes, suitable for demanding steel and non‑ferrous applications. HSS‑Co for high wear resistance Form B with straight flutes for machine tapping Metric fine thread M22 × 2 mm, tolerance 6H Suitable for steels up to 1000 N/mm² Precision thread quality for reliable assembly performance The HSS‑Co composition combined with Form B geometry delivers a balance of toughness and heat resistance, ensuring stable cutting when producing fine metric threads. The tool’s straight flutes and flank relief reduce thread deformation and support a clean chip evacuation pattern, which is particularly important for through‑hole tapping. Specified to DIN 374B and manufactured to the 6H tolerance band, this tap generates threads that match standardised mating parts, contributing to predictable assembly performance and reduced rework. Broad material range and industrial suitability Engineered for a wide material spectrum, the tap is suitable for steels up to 1000 N/mm², temper cast irons and long‑chipping non‑ferrous metals. The geometry and cobalt‑alloy substrate maintain cutting edge integrity when facing tougher workpiece materials, so the tool performs reliably in mixed production environments. The presence of a peel‑cut (shear cut) for through‑hole tapping improves chip formation and lowers the risk of thread blockage, which supports higher process uptime in repetitive machining tasks. Robust shank and machine compatibility for secure clamping A shank Ø 18 mm provides solid clamping in standard collets and tool holders, offering axial stability and minimised run‑out during high‑precision tapping cycles. The straight‑flute configuration favours machine tapping operations with mechanical or electronic tapping cycles, and the relieved flanks help maintain thread form accuracy over extended tool life. These design elements together reduce the frequency of tool changes and help sustain consistent part dimensions across batches. Practical benefits for production planning and procurement Choosing a factory‑grade machine tap with HSS‑Co construction and metric fine thread specification simplifies production planning where fine‑pitch fastenings are required. The combination of standard compliance and material capability supports leaner tool inventories by enabling one tap to address several component families. For procurement and workshop managers seeking reliable supply and professional guidance, Metav Werkzeuge provides consolidated sourcing and technical consultation to align the tool selection with process parameters and component tolerances. For robust fine‑pitch tapping choose the TECWERK HSS‑Co machine tap (M22 x 2 mm, DIN 374B) and contact Metav Werkzeuge for supply coordination or expert consultation from Emmerich. Technical Data Article number: 2000867242NW Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: M22 x 2 mm Tolerance: 6H Shank diameter: 18 mm Material: HSS‑Co (cobalt high‑speed steel) Material capability: steels up to ~1000 N/mm² Special features Form B (DIN 374B) Straight flutes Flanks relieved Metric ISO fine thread (MF), DIN 13 Peel‑cut for through‑hole threading Suitable for temper cast iron and long‑chipping non‑ferrous metals FAQ What thread standard does this tap follow? The tap conforms to DIN 374B and produces M22 x 2 mm metric ISO fine threads with a 6H tolerance fit, matching common mating thread specifications. Which materials can be machined with this tool? This TECWERK machine tap (SKU 2000867242NW) is suitable for steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. Why is HSS‑Co used for this tap? HSS‑Co offers improved red hardness and wear resistance compared with standard HSS, which helps the tap retain cutting edges when machining tougher materials and in continuous operations. Is the tool suitable for machine tapping cycles? Yes; the Form B geometry with straight flutes and a shank Ø 18 mm ensures stable clamping and consistent chip evacuation during machine tapping cycles. What advantage does the peel‑cut deliver for through‑hole tapping? The peel‑cut produces predictable, striping chip formation that reduces the risk of chip packing in through‑holes and supports uninterrupted thread production. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a combination of HSS‑Co tool steel, straight‑flute geometry and a tolerance 6H finish to secure reliable, repeatable MF24x2 threads in production environments; order the machine tap directly via Metav Werkzeuge or ask our consultants if needed. Machine tap DIN 374B MF24×2 mm, HSS‑Co, Form B – TECWERK The Machine tap DIN 374B MF24×2 mm, HSS‑Co, Form B (TECWERK) is a precision machine tap for producing metric fine MF threads in through‑hole applications across steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. HSS‑Co for elevated heat resistance Straight flutes (Form B) for stable cutting Tolerance field 6H for consistent fit Shank Ø 18 mm for secure clamping Consistent fine‑thread accuracy for reliable assembly The combination of MF24×2 threading according to DIN 13 and a tolerance 6H specification ensures consistent thread geometry and predictable assembly behaviour on mating parts. This high level of dimensional control reduces rework and rejects, translating into improved production yield and fewer assembly stoppages. For engineers seeking dependable tolerance conformity, the metric fine‑thread form offers close fits where vibration resistance and load distribution matter. Durable cutting performance and tool life Constructed from HSS‑Co (cobalt high‑speed steel) and executed in Form B with straight flutes, the tool delivers elevated red‑hardness and wear resistance compared with standard high‑speed steel. The flanks are ground for precise cutting action, which lowers cutting forces and supports longer service intervals under industrial cycle loads. The shank Ø 18 mm provides enhanced rigidity in machine holders, reducing chatter and improving surface finish on the thread flank. Designed for through threads and varied materials Equipped with a peeling‑type chamfer for through threads, this tap is optimised for continuous feed machining where chip evacuation and thread quality must be maintained across mixed batches. It is suitable for machining steels up to around 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals such as aluminium and copper alloys. The tool geometry balances cutting stability and chip control, helping to avoid chip jamming and downtime in automated tapping cycles. Practical machine integration and handling benefits The straight‑flute form and ground flanks simplify dressing and reconditioning where necessary, while the standardised shank diameter allows fast integration into existing tool holders and adaptors. In production environments focused on repeatability, the combination of material grade and geometry reduces the frequency of tool change‑overs and supports steady cycle times. Technical queries about machining parameters or holder compatibility can be addressed by Metav’s product experts to match the tool to the specific machining centre. Contact Metav Werkzeuge for tailored advice and reliable supply of TECWERK HSS‑Co machine taps — discuss machining parameters or request availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867269NW Name: Maschinengewindebohrer DIN 374B MF24×2 mm HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: MF24 × 2 mm Tolerance: 6H Shank diameter: 18 mm Recommended max material tensile strength: approx. 1000 N/mm² Special features HSS‑Co (cobalt high‑speed steel) Form B — straight flutes Flanks ground (flank relief) Metric ISO fine thread (DIN 13) Peeling chamfer for through threads Suitable for steel, temper cast iron and long‑chipping non‑ferrous metals FAQ What materials can this tap machine threads in? The tap machines threads in steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals; these applications are explicitly listed for the TECWERK MF24×2 machine tap. Is the thread form compatible with standard ISO nuts and components? Yes — the MF24×2 profile follows DIN 13 with a tolerance 6H, providing compatibility with standard metric fine‑thread components designed to that specification. What advantages does HSS‑Co provide for tapping operations? HSS‑Co offers increased red‑hardness and wear resistance compared with conventional high‑speed steel, so the TECWERK tap sustains cutting performance longer under elevated temperatures and demanding cycle use. Is this tap intended for through‑hole threading only? The tool is supplied with a peeling‑type chamfer optimised for through threads, making it particularly effective for through‑hole applications while still usable in many general tapping situations in production. What machine holder is required for the shank size? The tap has a shank Ø 18 mm, so a corresponding 18 mm collet or chuck adapter with secure retention is recommended to ensure rigidity and repeatable alignment for efficient tapping. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

A resilient HSS‑Co construction combined with Form B geometry and an 18 mm shank ensures consistent metric fine-thread production in demanding materials; the combination of wear resistance and precise tolerance control supports uninterrupted machine tapping. Order the tap directly via Metav Werkzeuge or consult their specialists for application guidance. Machine tap DIN 374B — MF 24×1.5 HSS‑Co 6H (TECWERK), Form B, straight flutes The Machine tap MF 24×1.5 HSS‑Co is a Form B, straight‑fluted tool for producing metric fine threads to DIN 13 with tolerance 6H, suited to machine tapping in steels and long‑chipping non‑ferrous metals. HSS‑Co construction for high wear resistance Form B, straight flutes for stable cutting Metric fine thread MF 24×1.5, tolerance 6H 18 mm shank; chamfered entry for through threads Precision threads that meet industrial tolerance requirements The high‑alloy HSS‑Co composition provides enhanced hot‑hardness and wear life compared with standard high‑speed steels, which makes the tool appropriate for medium‑ to high‑strength materials. Built to the DIN 13 metric fine‑thread standard and finished to tolerance 6H, the tap guarantees repeatable thread form and fit in serial production. This level of specification reduces scrap and rework by maintaining consistent engagement with mating components, which supports reliable assembly processes on automated machines where interchangeability is essential. Controlled chip flow and reduced breakage for machine applications Form B geometry with straight flutes and relieved flanks optimises chip formation and evacuation during through‑hole tapping. The tool’s chamfered entry (peel chamfer) is designed for through threads, allowing the cutting edges to engage progressively and minimise axial loads at start‑up. As a result, the risk of tap breakage is reduced and surface finish of the internal thread is improved, lowering post‑process deburring and inspection time and maintaining uptime on production lines. Material compatibility and application advantages This tapping tool is specified for use in steels up to approximately 1000 N/mm² tensile strength, temper‑cast iron and long‑chipping non‑ferrous metals, offering versatility across typical workshop and light industrial applications. The cobalt‑enriched alloy retains hardness at elevated cutting temperatures, which prolongs tool life under cyclic loading and frequent machine starts. For production planners, this translates into predictable tool change intervals and fewer unscheduled stoppages, improving overall process efficiency. Machine integration and handling benefits An 18 mm shank diameter provides secure clamping in standard toolholders and spindles, while the tap’s machine‑grade shank allows rapid changeover in automated setups. Conformance to recognised standards and robust shank dimensions simplifies storage, tool management and tool life forecasting in a centralised procurement strategy. The combined effect is a dependable threading solution that aligns with systematic production practices and reduces downstream variances in assembled parts. For application support or to secure TECWERK machine taps for fine‑thread production, contact Metav Werkzeuge for tailored advice and reliable dispatch from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000867478NW Label: Maschinengewindebohrer DIN 374B MF24x1,5mm HSS-Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Thread: MF 24×1.5 Tolerance: 6H Shank diameter: 18 mm Material: HSS‑Co Suitable tensile strength: up to approx. 1000 N/mm² Special features Form B geometry Straight flutes Relieved flanks Peel chamfer for through threads Metric fine thread to DIN 13 Suitable for steels, temper cast iron and long‑chipping non‑ferrous metals FAQ What thread size and pitch does this tap produce? The tool cuts a metric fine thread MF 24×1.5 in accordance with DIN 13, using a tolerance class of 6H. Which materials are suitable for machining with this tap? The TECWERK machine tap is intended for steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals. How does Form B geometry affect performance? Form B with straight flutes and relieved flanks improves chip control and stability during machine tapping, reducing the likelihood of tap breakage and improving thread quality. Is the shank suitable for standard machine holders? Yes, the 18 mm shank is designed for secure clamping in common machine toolholders and supports rapid changeovers in production environments. What feature assists in starting through‑hole threads? The tap’s peel chamfer gives a progressive entry for through threads, decreasing axial shock at engagement and promoting consistent cutting performance. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a HSS‑Co design and DIN 374C geometry for reliable metric fine threading in blind holes; the robust shank Ø 18 mm ensures secure clamping and steady production. Order the tap directly via Metav Werkzeuge or consult the specialists for tailored advice. TECWERK machine tap DIN 374C MF24×1.5 mm HSS‑Co 6H, shank Ø 18 mm TECWERK machine tap MF24×1.5 mm for precision metric fine threads in production environments, optimised for blind‑hole threading and medium‑strength steels Cobalt HSS for increased heat resistance DIN 374C standard for reliable thread form Right‑hand spiral 40° for effective chip removal Suitable for blind holes and steels up to 1000 N/mm² Precision threading for demanding components The tap employs DIN 374C geometry and produces an ISO fine thread (MF24×1.5 mm) with 6H tolerance, delivering consistent pitch and flank form for assemblies that require tight fits. This specification reduces the risk of mis‑fits and rework, as the defined tolerance band ensures compatibility with standard nuts and gauges. The described geometry is particularly beneficial where a secure, vibration‑resistant connection is needed, translating technical accuracy into fewer rejects and more predictable assembly times. Reliable chip control and extended tool life Built from HSS‑Co and configured as Form C with a right‑hand spiral 40°, the tool clears chips upward and away from the cutting zone, a decisive advantage when working into blind holes. The flanks are relief‑ground, improving cutting action and reducing heat buildup at the cutting edge. Together, these features extend tool life and lower the frequency of tap breaks, improving uptime and reducing consumable costs — a practical benefit for shops running small to medium batch sizes on lathes or machining centres. Workshop compatibility and material range Designed for use in a wide range of materials, the tap is suitable for structural steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous alloys. The shank Ø 18 mm provides a secure fit in common machine holders and quick‑change adaptors, simplifying integration into existing tool inventories. Where process reliability matters, this threading tool offers a balance of hardness, toughness and geometry that supports stable cycles and predictable thread quality across serial production. For ordering, availability checks or production advice contact Metav Werkzeuge — supply from our Emmerich hub and technical guidance by phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 2000867492NW Product designation: Machine tap DIN 374C MF24×1.5 mm HSS‑Co 6H TECWERK Manufacturer: TECWERK Core specifications Thread size: MF24×1.5 mm Shank diameter: 18 mm Tolerance: 6H Spiral angle: 40° Strength range: up to approx. 1000 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Standard: DIN 374C, DIN 13 compatibility Form: C, right‑hand spiral Flanks relief‑ground For blind holes Suitable for steels, temper cast iron and long‑chipping non‑ferrous metals FAQ Which materials can be machined with this tap? The TECWERK machine tap is specified for use in steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals, matching typical workshop requirements for fine metric threads. Is this tap suitable for blind‑hole threading? Yes, the tool is designed for blind holes; the right‑hand spiral and form C geometry promote upward chip evacuation to avoid clogging in closed‑end bores. What does the 6H tolerance mean for assemblies? A 6H tolerance specifies a standard internal thread class that ensures interchangeability with standard external threads, providing reliable fits for bolts and nuts in metric fine series. Can the tap be used in a machining centre or manual tapping head? The shank Ø 18 mm allows secure fitting in common machine holders and many tapping adaptors, making it compatible with both machining centres and suitable tapping heads used in production shops. How does the HSS‑Co material affect performance? The HSS‑Co composition increases red hardness and wear resistance compared with standard HSS, improving durability under higher cutting temperatures and extending service life in demanding applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-performance cobalt tool that combines durability, precise ISO metric threads and robust shank stability for trouble-free production. Order the TECWERK machine tap directly via Metav Werkzeuge or consult Metav’s advisors for application-specific guidance. Machine tap DIN 376B VA M24×3 HSS‑Co, nitrided and vapourised (6H) — TECWERK The Machine tap DIN 376B VA M24×3 HSS‑Co is a straight-fluted, Form B tap designed to cut ISO metric internal threads in high-strength and heat-resistant stainless steels. HSS‑Co for high wear resistance Nitrided and vapourised surface treatment ISO2 (6H) tolerance for precise thread fit Straight flutes for controlled chip evacuation Longer tool life thanks to cobalt and surface treatment Manufactured from HSS‑Co, this tap delivers improved toughness and wear resistance compared with standard high-speed steels. The additional nitrided and vapourised surface treatment reduces friction at the cutting edges and delays flank wear, which translates into fewer tool changes and longer continuous production runs. The blue identification ring provides rapid visual recognition of the tool type on the shelf or in the toolroom. These material and surface choices are particularly beneficial where tool replacement intervals directly affect throughput and operating costs. Consistent, accurate threads for reliable assembly The geometry follows the metric thread form specified in DIN 13 Blatt 1 and the tolerance class ISO2 (6H), ensuring a reliable fit for bolts and fasteners in precision assemblies. The tool’s flank relief is ground to maintain thread profile accuracy while reducing insertion torque; a dedicated lead (Schälanschnitt) facilitates entry for through-thread applications and improves start reliability. For production engineering this means repeatable thread quality with less rework and predictable torque characteristics during assembly. Designed for demanding materials and stable clamping This tap is expressly suited to machining stainless, acid- and heat-resistant steels with tensile strength above 850 N/mm², where conventional taps often fail. The straight flutes support chip control in tougher materials, and the 18 mm shank provides a robust connection to holders and spindles, improving concentricity and reducing vibration. Together, these features lower the risk of breakage in continuous tapping operations and enhance process stability across batch and flow manufacturing. For high-strength threading applications, choose the TECWERK machine tap and contact Metav Werkzeuge for tailored advice or order handling via Metav Werkzeuge. Technical data Article number: 2000867527NW Manufacturer: TECWERK Packaging unit: 1 UID: 2000867527NW Facts Thread size: M24×3 Shank diameter: 18 mm Tolerance class: ISO2 (6H) Special features Material: HSS‑Co Form: B, Type VA Surface: nitrided and vapourised Identification: blue ring Flute type: straight flutes Flank treatment: relief ground Thread standard: DIN 13 Blatt 1 Lead: chamfer/peel cut for through threads Suitable for: stainless, acid- and heat-resistant steels >850 N/mm² FAQ What materials is this tap suitable for? The TECWERK machine tap M24×3 is suitable for stainless, acid- and heat-resistant steels with tensile strengths above 850 N/mm², as specified in the product data. What does the ISO2 (6H) tolerance mean in practice? ISO2 (6H) on the TECWERK tap indicates a standard internal thread tolerance that ensures a secure and repeatable fit with standard metric bolts and fasteners. How does the nitrided and vapourised surface benefit production? The nitrided and vapourised finish on this tap reduces friction and wear at the cutting edges, extending tool life and maintaining machining stability during extended runs. Is the shank diameter compatible with standard holders? The 18 mm shank provides a robust interface for common machine tool holders and chucks, improving concentricity and reducing the risk of vibration-related breakage. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from the combination of HSS‑Co construction and a vapourised surface finish for improved wear resistance and longer tool life; the tap is engineered for Whitworth pipe thread G 1"×11 and blind‑hole applications in heat‑resistant and stainless steels. Order the item directly via Metav Werkzeuge or consult the sales team for specification checks and supply details. Machine thread tap DIN 5156C VA G 1 inch × 11 HSS‑Co, vapourised — TECWERK A machine thread tap DIN 5156C VA G 1 inch × 11 HSS‑Co designed for forming Whitworth pipe threads in blind holes and for machining hard, heat‑resistant steels under demanding workshop and production conditions HSS‑Co construction for high wear resistance Vapourised surface finish for extended tool life Right‑hand 40° spiral, flanks relieved For Whitworth pipe thread G 1" × 11, blind holes Precision threading for demanding materials The tap is manufactured from HSS‑Co, a cobalt‑alloy high‑speed steel that retains hardness at elevated temperatures and improves resistance when cutting hard‑to‑machine materials. As a Form C / Type VA tool, it is optimised for long‑run performance and stable geometry, which reduces the frequency of regrinding and tool changeovers. The use of a cobalt‑enhanced substrate ensures consistent thread form in materials with higher tensile strength, translating into reliable joint integrity and fewer rejects in serial production. Consistent performance and extended tool life A vapourised surface combined with nitriding produces a hard, low‑friction layer that reduces flank wear and improves chip flow. The tap’s right‑hand 40° spiral and flanks relieved profile aid chip control and reduce cutting forces, notably in interrupted cuts and sticky alloys. Together these features lower torque peaks and the risk of tap breakage, providing measurable gains in process stability and less downtime for tool changes — a clear efficiency advantage in batch and continuous machining environments. Built for Whitworth pipe threads and blind‑hole tapping Engineered specifically for Whitworth pipe thread G 1"×11 in accordance with DIN ISO 228, the tool produces the standard pipe thread form required for pressure‑tight connections. The geometry and spiral direction make it particularly suitable for blind holes, where controlled chip evacuation and conservative cutting action are essential to avoid tool seizure. This combination of standards compliance and practical design ensures compatibility with common pipe fittings and makes the tool an appropriate choice for HVAC, plant construction and hydraulic assembly tasks. Workshop compatibility and handling advantages With a shank Ø 25 mm, the tap is intended for secure clamping in machine tool holders and compatible spindles, enabling robust torque transmission and concentric accuracy. The single‑unit packaging reflects workshop convenience for immediate replacement needs. Identification is simplified by the blue ring marking and the vapourised finish, which also aids inspection and sorting. For production planners, the tool’s specification supports predictable service intervals and straightforward inventory management. Contact Metav Werkzeuge for tailored technical advice or to secure the TECWERK machine thread tap (DIN 5156C VA, G 1"×11, SKU 2000867572NW); the Metav specialists in Emmerich will provide supply clarification and specification support Technical Data Article number: 2000867572NW Brand: TECWERK Packaging unit: 1 Facts Shank diameter: 25 mm Thread: G 1" × 11 (11 tpi) Spiral angle: 40° Suitable for tensile strength: > 850 N/mm² Special features Material: HSS‑Co Form/Type: Form C / Type VA Surface: nitrided and vapourised Identification: blue ring Geometry: flanks relieved Application: Blind holes, Whitworth pipe thread per DIN ISO 228 Suitable materials: stainless, acid‑ and heat‑resistant steels FAQ Which thread standard does this tap produce? The TECWERK machine thread tap DIN 5156C VA G 1"×11 (SKU 2000867572NW) produces Whitworth pipe thread in accordance with DIN ISO 228. Is this tool suitable for blind‑hole tapping? Yes, the TECWERK DIN 5156C VA tap is designed for blind holes, with a 40° right‑hand spiral and relieved flanks to aid chip removal and reduce breakage risk. Which materials can be machined with this tap? This tap is suitable for hard‑to‑machine materials, including stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm², as specified for the TECWERK tool. What is the shank size and how should it be clamped? The TECWERK tap has a shank Ø 25 mm and should be clamped in a suitably sized holder or spindle collet to ensure concentric clamping and torque transmission. What surface treatment does the tool have and what benefit does it provide? The TECWERK tool features a nitrided and vapourised surface finish, which reduces friction, improves wear resistance and helps to extend tool life under heavy‑duty cutting conditions. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co construction, straight‑fluted Form B geometry and a robust 25 mm shank for reliable Whitworth G threading in demanding workshop use; order the tap directly via Metav Werkzeuge or consult the Metav team for technical advice. Machine pipe tap DIN 5156B G 1" x11 HSS‑Co ISO 228 – TECWERK A machine pipe tap for Whitworth G threads, specified to DIN ISO 228 and engineered for through threads in steels and malleable cast iron. Solid HSS‑Co material for durability Straight‑fluted Form B for stable cutting For Whitworth pipe threads G to ISO 228 Shank Ø 25 mm, suited for through threads Precision threading that reduces rework and downtime The machine pipe tap DIN 5156B G 1" x11 HSS‑Co ISO 228 is designed to deliver repeatable, high‑quality threads in production and repair environments. Constructed from HSS‑Co, the tool provides elevated wear resistance and retains cutting geometry longer than standard high‑speed steels, which translates into fewer tool changes and reduced machine downtime. The Form B straight‑fluted design with flank relief produces clean thread flanks and consistent chip evacuation when used in through‑hole operations, improving first‑pass accuracy and lowering the risk of rework. Broad material compatibility for versatile workshop use This tap is suitable for machining in steel up to 1000 N/mm² and in malleable cast iron, enabling a single tool to cover common industrial applications. The capability to handle these materials means fewer specialised tools are required, simplifying tooling inventories. The shank Ø 25 mm ensures secure clamping in standard toolholders and reduces run‑out, supporting consistent performance across batches and enhancing component interchangeability in assemblies that rely on Whitworth G pipe fittings. Reliable integration into production workflows Engineered for through threads and conforming to DIN ISO 228, this tap aligns with established standards to facilitate predictable assembly and inspection processes. The straight‑fluted Form B geometry balances cutting forces for stable operation under varying feeds, and the HSS‑Co composition offers high durability under cyclic loads. For production planners and maintenance engineers, the tap provides a pragmatic balance of longevity and machining quality, supporting leaner tool management and dependable throughput in workshop and light industrial settings. For Whitworth G thread requirements choose the TECWERK machine pipe tap and contact Metav Werkzeuge for tailored advice and stock information at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867505NW Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 25 mm Thread: G 1" x 11 (11 tpi) Suitable for steels up to approx. 1000 N/mm² Special features HSS‑Co material Form B, straight fluted, flank relief Whitworth pipe thread G to DIN ISO 228 For through threads; suitable for steel and malleable cast iron FAQ What thread standard does this tap conform to? The tap conforms to DIN ISO 228 for Whitworth pipe threads G and is specified as G 1" x11 for standard pipe fittings. Which materials can be machined with this tap? This HSS‑Co machine pipe tap is suitable for steel up to approximately 1000 N/mm² and for malleable cast iron, offering versatility for common workshop materials. What is the shank size and how does it affect clamping? The shank Ø 25 mm provides a secure grip in standard toolholders, reducing run‑out and supporting consistent thread quality during through‑hole tapping. Is the geometry suitable for through threads or blind holes? The straight‑fluted Form B geometry is optimised for through threads, promoting efficient chip evacuation and reliable thread form in continuous drilling conditions. How does the HSS‑Co composition benefit production use? The HSS‑Co alloy improves wear resistance and heat tolerance compared with standard HSS, extending tool life and reducing frequency of replacement in repetitive production tasks. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a HSS‑Co construction and Form B straight flutes for consistent fine‑thread quality; the chamfer for through holes and 6H tolerance ensure reliable assembly in demanding production runs. Order the machine tap directly via Metav Werkzeuge or request application advice from our consultants. Machine tap DIN 374B MF26×1.5 HSS‑Co 6H (TECWERK) A machine tap MF26×1.5 HSS‑Co optimised for through threads and fine metric applications in steels and long‑chipping non‑ferrous metals HSS‑Co high‑performance cutting material Straight flutes (Form B) for controlled chip flow Metric ISO fine thread MF26×1.5, tolerance 6H Chamfer for reliable through‑threading Shank Ø 18 mm for secure tool holding Consistent fine threads with industrial grade material The TECWERK machine tap MF26×1.5 combines HSS‑Co metallurgy with a Form B straight‑flute geometry to deliver repeatable thread profiles in production environments. The cobalt‑alloy high‑speed steel provides elevated red‑hardness and wear resistance, which translates into longer tool life when machining medium‑strength steels. The tap’s 6H tolerance aligns with DIN‑based fitting standards, reducing rework and ensuring interchangeability in series production. Safer chip evacuation and reduced tap breakage Straight flutes with flank honing improve chip formation and evacuation on through holes, while the dedicated chamfer for through holes facilitates smooth thread entry and exit. These features lower the risk of tap fracture during continuous use, particularly in materials that produce long chips. Compatibility with materials up to approx. 1000 N/mm² tensile strength, malleable cast iron and long‑chipping non‑ferrous metals gives process planners clear boundaries for optimal application. Workshop integration, handling and quality gains Conforming to DIN 13 and specified as a metric fine thread, the tool supports standardised workflows and simplifies quality control. The shank Ø 18 mm offers stable clamping for reduced run‑out and better surface integrity of the formed thread. For procurement and supply security, Metav’s distribution combines broad stock depth with technical consultancy, helping maintenance and production teams select the correct tap and avoid costly downtime. For further technical details or material‑specific recommendations, Metav’s technical team can be contacted by e‑mail or phone. Contact Metav Werkzeuge to discuss application suitability and to request the TECWERK MF26×1.5 machine tap for precise, repeatable fine‑thread production Technical Data Article number: 2000867271NW Label: Maschinengewindebohrer DIN 374B MF26x1,5mm HSS-Co 6H TECWERK Manufacturer: TECWERK Packing unit: 1 Facts Thread: MF26×1.5 mm Tolerance: 6H Shank Ø: 18 mm Suitable up to: approx. 1000 N/mm² tensile strength Special features HSS‑Co (cobalt alloy high‑speed steel) Form B, straight fluted Flank honing (flanks honed) Metric ISO fine thread (MF) DIN 13 compliance Chamfer for through holes (peel‑type chamfer) Suitable for steels, malleable cast iron and long‑chipping non‑ferrous metals FAQ What materials can be machined with this tap? The TECWERK machine tap MF26×1.5 is suitable for steels up to approx. 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals. Which standard and tolerance does the tap follow? The tap is manufactured to DIN 13 and specified with a 6H tolerance for metric fine threads MF26×1.5. How does the Form B geometry benefit production? Form B straight flutes improve chip control in through‑hole tapping, and flank honing enhances thread quality and reduces burr formation. What does the chamfer for through holes do? The dedicated chamfer eases thread entry and exit on through holes, lowering axial load peaks and reducing the chance of tap breakage. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Compact HSS‑Co construction and DIN 374C Form C geometry deliver consistent metric fine threads in blind holes, while the shank Ø 18 mm permits secure machine mounting; order the TECWERK machine tap via Metav Werkzeuge or consult the Metav team for application matching and availability. TECWERK machine tap MF26×1.5 HSS‑Co — DIN 374C, Form C A TECWERK machine tap MF26×1.5 engineered for cutting metric fine threads in blind holes, suitable for medium‑to‑high tensile steels, temper castings and long‑chipping non‑ferrous metals HSS‑Co cobalt high-speed steel DIN 374C Form C geometry Right-hand 40° spiral for blind holes Shank Ø 18 mm for secure machine mounting Robust material for extended service life and repeatable production The use of HSS‑Co (cobalt high‑speed steel) provides increased heat and wear resistance compared with standard high‑speed grades, extending tool life in continuous production. The M26×1.5 metric fine thread form, combined with the DIN 374C specification, enables reliable repeatability across batches. For manufacturing environments where consistent thread quality and downtime reduction are priorities, this construction reduces the frequency of rework and tool changes. The result is a measurable improvement in process economy and component interchangeability. Geometry and tolerance that secure precise, interchangeable threads The Form C geometry with flank relief reduces side pressure on the thread flank and helps produce clean thread profiles. The tool is specified to DIN 13 with a tolerance field 6H, which corresponds to a standard engineering fit for internal threads and supports compatibility with mating parts. The right‑hand 40° spiral is optimised for blind‑hole tapping, promoting controlled chip evacuation and lowering the risk of chip packing in the blind end. These design choices increase surface quality and reduce the likelihood of thread distortion during tapping. Machine compatibility and application scope for workshop and production use With a shank diameter of 18 mm, the tap fits common machine holders and machining centres that accept solid shanks for direct mounting. The tool is rated for use in steels up to approximately 1000 N/mm² tensile strength, in temper cast iron and in long‑chipping non‑ferrous metals, making it suitable for maintenance, small‑series production and industrial assemblies. The solid construction and ground flank detail allow stable cutting behaviour under series conditions; when combined with appropriate speeds and lubricant choice, the tap supports efficient thread creation with minimal secondary finishing. For dependable metric fine‑thread production with TECWERK quality, contact Metav Werkzeuge for purchasing details or tailored application advice — Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000867551NW Brand: TECWERK Thread: M26 × 1.5 (metric fine thread MF) Standard: DIN 374C; DIN 13 Material: HSS‑Co (cobalt high‑speed steel) Form: C; right‑hand spiral 40° Tolerance: 6H Application: blind‑hole threads Suitable for: steels up to approx. 1000 N/mm²; temper cast iron; long‑chipping non‑ferrous metals Shank diameter: 18 mm Packing unit: 1 FAQ What materials are suitable for this tap? The TECWERK machine tap MF26×1.5 HSS‑Co is suitable for steels up to approximately 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals, as stated in the product data. Is the tool suitable for blind‑hole tapping? Yes — the right‑hand 40° spiral and Form C geometry are designed for blind‑hole threads, improving chip control and reducing the risk of chip blockage at the blind end. What tolerance and standard are provided? The thread is produced to DIN 13 with a tolerance field of 6H, providing a standard engineering fit for internal metric fine threads. What machine mounting is required? The tap has a shank diameter of 18 mm, compatible with machine holders and chucks that accept solid shank tools of that size. Does this tap require a specific coolant or lubricant? The TECWERK HSS‑Co construction benefits from appropriate cutting fluid or lubricant for the material being machined to support surface finish and tool life; selection depends on the workpiece material and machining conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co construction, a Form B straight flute geometry and a 6H tolerance for consistent, high‑quality fine threads; order the machine tap directly via Metav Werkzeuge or consult our specialists for application guidance. Maschinengewindebohrer DIN 374B MF27×2 mm — machine tap, HSS‑Co, 6H tolerance (TECWERK) A TECWERK machine tap designed for producing metric ISO fine threads MF27×2 in through‑hole applications, optimised for high‑strength steels and long‑chipping non‑ferrous materials. HSS‑Co material for extended tool life Straight‑fluted Form B for reliable chip flow Tolerance 6H for accurate thread fit Suitable for steels up to 1000 N/mm² Consistent fine threads with industrial durability Manufactured from HSS‑Co, this machine tap delivers a balance of hardness and toughness that prolongs service life under demanding production conditions. The Form B straight flutes and the specially ground flanks reduce cutting forces and support predictable wear patterns, which translates into fewer rejects and more predictable cycle times. For production environments where repeatable thread quality is essential, this tool combines material technology and geometry to maintain thread integrity across extended runs. Broad material capability explained for workshop planners The tool is rated for machining in steels up to approximately 1000 N/mm², along with temper‑cast iron and long‑chipping non‑ferrous metals. The quoted tensile strength gives a practical limit for common structural and engineering steels; selecting a tap suited to that range avoids premature wear and maintains thread accuracy. Using a tool matched to the workpiece material reduces thread‑repair needs and supports efficient downstream assembly, especially where fine metric threads are specified by DIN 13. Precise fit and reduced rework through tolerance control The combination of DIN 13 standardisation and 6H tolerance ensures a snug, standardised internal thread fit for metric fine threads. A 6H tolerance class typically provides a reliable fit with standard bolts, reducing the likelihood of play or interference that can cause assembly problems. The inclusion of a cutting chamfer for through threads simplifies the initial engagement and helps avoid burr formation at the thread start, which lowers the need for secondary finishing. Operational advantages and workshop integration A 20 mm shank offers stable clamping in toolholders and adapters commonly found in machining centres and tapping heads. The straight‑flute configuration aids chip evacuation in through‑hole tapping and helps maintain thread form when cutting long‑chipping materials. Together, these features improve cycle reliability and reduce stoppages for clearing chips, supporting a smoother production flow and predictable maintenance intervals. For reliable production of MF27×2 fine threads choose the TECWERK machine tap and contact Metav Werkzeuge for tailored application advice and dependable supply from Emmerich. Technical Data Article number: 2000867277NW Product name: Machine thread tap DIN 374B MF27×2 mm HSS‑Co 6H TECWERK Brand: TECWERK Packaging unit: 1 UID: 2000867277NW Facts Thread size: MF27×2 mm Standard: DIN 13 / DIN 374B Tolerance class: 6H Shank diameter: 20 mm Suitable for materials up to approx. 1000 N/mm² tensile strength Special features Material: HSS‑Co (cobalt high‑speed steel) Form B, straight fluted Flanks honed Cutting chamfer for through threads Suitable for steels, temper cast iron and long‑chipping non‑ferrous metals FAQ Is this tap suitable for through‑hole tapping in steel? Yes. The TECWERK machine tap is specified for through‑hole threads and is suitable for steels up to approximately 1000 N/mm², with a cutting chamfer optimised for clear thread starts. What does the 6H tolerance mean for assembly? A 6H tolerance on the internal thread gives a standard, reliable fit with commonly used metric bolts; it reduces play while allowing standard external thread tolerances to assemble without interference. Can this tap be used for non‑ferrous metals such as aluminium or brass? Yes. The tool’s geometry and HSS‑Co material make it suitable for long‑chipping non‑ferrous metals, providing controlled chip formation and evacuation. What is the shank size and how does it affect tooling? The shank diameter is 20 mm, which is compatible with standard holders and tapping heads used in industrial machining centres, ensuring stable clamping and improved concentricity. Which standards are referenced for the thread form and tolerance? The tap adheres to DIN 13 for metric fine threads and is manufactured to DIN 374B specifications with a 6H tolerance class; the SKU is 2000867277NW for ordering and specification checks. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high wear resistance and precise ISO tolerance for reliable, repeatable thread production; the robust shank ensures secure clamping and stable machining. Order the tap directly via Metav Werkzeuge or consult Metav’s technical advisers for application-specific guidance. Machine tap DIN 374C MF27×1.5 HSS‑Co 6H – TECWERK The Machine tap DIN 374C MF27×1.5 HSS‑Co 6H is a right‑hand, fine‑pitch ISO metric tap engineered for producing blind threads in steels, temper cast iron and long‑chip non‑ferrous metals HSS‑Co for enhanced wear resistance 40° right‑hand spiral for chip control Form C with chamfered flanks Shank Ø 20 mm for secure mounting Precision threads with extended tool life The HSS‑Co composition combined with the 6H tolerance delivers a reliable balance between hardness and toughness, which extends tool life under continuous use. The tap is manufactured to ISO fine‑pitch standards so that threads meet consistent dimensional requirements; this reduces rework and inspection effort on the shop floor. Measurable production benefits include fewer rejects and steadier cycle times when machining metric fine threads. Safer machining in blind holes and improved chip evacuation Designed with a 40° right‑hand spiral and Form C geometry, the tool promotes axial chip evacuation, which is particularly important for blind holes where chip buildup risks tap breakage. The chamfered flanks improve thread entry and reduce cutting forces, while the shank Ø 20 mm ensures stable clamping in machine holders. These features together lower the likelihood of tool failure and minimise unscheduled downtime during batch runs. Versatile application and workshop integration Suitable for use in steels up to ca. 1000 N/mm², temper cast iron and long‑chip non‑ferrous metals, the machine tap integrates into standard production environments without special requirements. The robust construction supports automated tapping cycles and repeated use in industrial settings. For procurement and stocking strategies, the tool is a pragmatic choice for workshops seeking consistent performance and simplified supplier management; Metav Werkzeuge’s quality filter further ensures dependable supply logistics and product consistency. For workshop‑grade reliability choose the TECWERK HSS‑Co machine tap and contact Metav Werkzeuge for application advice or order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867552NW Product: Machine tap DIN 374C MF27×1.5 HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Data Thread size: MF27×1.5 Tolerance: 6H Shank diameter: Ø 20 mm Spiral angle: 40° right‑hand Material: HSS‑Co Suitable strength: steels up to ca. 1000 N/mm² Special features Form C geometry Chamfered flanks For blind hole threads Conforms to DIN 13 Suitable for temper cast iron and long‑chip non‑ferrous metals FAQ What thread form and pitch does this tap cut? The TECWERK machine tap cuts an ISO fine‑pitch metric thread MF27×1.5, produced to DIN 374C and DIN 13 specifications. Is the tap suitable for blind hole tapping? Yes, the tool features a 40° right‑hand spiral and Form C geometry specifically intended for reliable chip evacuation in blind holes. Which materials can be machined with this tap? The tap is suitable for steels up to ca. 1000 N/mm², temper cast iron and long‑chip non‑ferrous metals, taking advantage of the HSS‑Co composition. What tolerance can be expected from the threads? Threads produced with this machine tap meet the 6H tolerance class for metric ISO fine threads, offering consistent dimensional accuracy. How should the tap be held in the machine? Use a secure clamping system compatible with a shank Ø 20 mm to ensure stable mounting and minimise runout during tapping. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co cutting material and 6H tolerance to ensure precise, repeatable metric fine threads while reducing downtime; order the tap directly via Metav Werkzeuge or consult the technical team for application-specific advice. Machine tap MF27×1.5 HSS‑Co DIN 374B — TECWERK, Form B, 20 mm shank The Machine tap MF27×1.5 HSS‑Co DIN 374B is a straight‑fluted Form B tap designed for producing precise metric fine threads in through‑hole applications on medium‑strength steels and long‑chipping non‑ferrous metals HSS‑Co, Form B, straight flutes, flanks relieved Metric ISO fine thread MF27×1.5, DIN 13, tolerance 6H Through‑hole chamfer for clean thread start Suitable for steels up to 1000 N/mm² and non‑ferrous High precision where thread tolerance matters The use of HSS‑Co (cobalt‑alloyed high‑speed steel) and the 6H tolerance field make this tap a reliable choice when reproducible fits and assembly tolerances are required. The tool’s Form B geometry with relieved flanks reduces radial cutting forces, which supports consistent thread form and helps maintain gauge tolerances over long production runs. For workshops transitioning from hand taps to machine tapping, this specification ensures compatibility with standard metric ISO fine‑thread requirements and DIN 13 nomenclature while offering improved wear resistance compared with plain HSS. Optimised for through‑hole tapping and mixed materials Equipped with a dedicated through‑hole chamfer, the tap initiates threads cleanly in through holes and evacuates chips effectively during continuous operation. The geometry and material are specified for use in steels up to 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals, making it suitable for diverse components from structural brackets to lightweight housings. The 20 mm shank supports secure clamping in machine holders, stabilising concentricity and contributing to reliable runout control — a key factor for achieving uniform thread quality across batches. Practical integration into workshop and production environments Designed as a machine tap for standard tool spindles and holders, the item supports efficient cycle planning and predictable maintenance intervals. The straight‑flute cut combined with the peel‑style chamfer reduces the need for frequent tool changes when processing compatible materials, which benefits throughput and total cost of ownership. When selecting cutting speeds and feeds, aligning parameters with material machinability and coolant use will extend tool life; the tap’s specification simplifies this decision by clearly defining suitable material classes and maximum recommended strength. For specification matching and batch planning, the SKU and technical data block below provide concise reference values. For tailored supply and application advice on TECWERK HSS‑Co machine taps, contact Metav Werkzeuge today for direct ordering and professional consultation from Emmerich. Technical data Article number: 2000867272NW Designation: Machine tap DIN 374B MF27×1.5 HSS‑Co 6H, TECWERK Packaging unit: 1 Manufacturer: TECWERK Facts Thread: MF27×1.5 Tolerance field: 6H Standard: DIN 13 Shank diameter: 20 mm Material strength suitability: up to approx. 1000 N/mm² Special features HSS‑Co cutting material Form B geometry Straight flutes Flanks relieved Through‑hole chamfer (Schälanschnitt) Intended for steels, malleable cast iron, long‑chipping non‑ferrous metals FAQ Which materials is this tap suitable for? The Machine tap MF27×1.5 HSS‑Co DIN 374B from TECWERK is specified for steels up to approx. 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals. What thread standard and tolerance does it produce? This tool produces a metric ISO fine thread MF27×1.5 conforming to DIN 13 with tolerance field 6H, matching common assembly and gauge requirements. Is the tool intended for through‑hole or blind‑hole tapping? The tap is supplied with a through‑hole chamfer, making it optimised for through‑hole tapping and ensuring a clean thread start and improved chip evacuation. What shank size should the machine holder accept? The shank diameter is 20 mm, allowing secure clamping in standard machine tool holders designed for that shank size. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high‑performance cutting geometry, standardised thread tolerance and sturdy shank design to ensure consistent production runs with minimal rework; order the tap directly via Metav Werkzeuge or consult the team for specification advice. Machine tap DIN 376C M27 x 3 mm — HSS‑Co, 6H tolerance by TECWERK The Machine tap DIN 376C M27 x 3 mm — HSS‑Co, 6H tolerance is a precision machine tap for producing metric ISO threads in blind holes and medium‑strength steels Machine tap DIN 376C Form C HSS‑Co Right‑hand 40° spiral for blind holes Tolerance ISO2 (6H) for standard fits 20 mm shank for secure clamping Reliable thread quality and consistent fit The HSS‑Co construction combines heat resistance with toughness, making the tap suitable for machining steels up to approx. 900 N/mm² tensile strength. The specified tolerance field ISO2 (6H) ensures a predictable internal thread fit, which reduces the need for manual adjustment and guarantees interchangeability with bolts and fasteners made to metric ISO standards. This technical consistency supports smoother assembly processes and fewer rejects in serial production. Designed for blind‑hole tapping with effective chip control Equipped with a right‑hand 40° spiral, this tap is optimised for blind holes, where chip evacuation is critical. The spiral geometry directs chips away from the cutting zone and helps prevent clogging at the thread root, which in turn lowers the risk of tool breakage and surface damage. The Form C profile and relieved flanks contribute to stable cutting behaviour and predictable thread form, especially when tapping in stopping holes in medium‑strength materials. Practical compatibility and machine integration A 20 mm shank provides robust engagement in the toolholder or collet, improving concentricity and reducing vibration during high‑speed tapping. The thread specification M27 x 3 mm and the adherence to DIN 376C enable straightforward substitution in existing production jigs and fixtures. For planners and process engineers, these measurable attributes mean easier integration into CNC tapping cycles and predictable tool life across batch runs. Productivity benefits and workshop confidence Using a cobalt‑alloy tap such as this reduces the frequency of tool changes and downtime compared with standard high‑speed steel in tougher steels. The combination of HSS‑Co, spiral design and standard tolerance delivers both performance and repeatability — practical advantages that translate into lower rework rates and steadier output. Metav Werkzeuge’s inventory practices and European distribution help ensure consistent supply and a quality filter that supports reliable procurement for workshops and industry. For specification guidance, availability and tailored advice on the TECWERK machine tap contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best solution for the application. Technical data Article number: 2000867391NW Label: Maschinengewindebohrer DIN 376C M27x3mm HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M27 x 3 mm Shank diameter: 20 mm Tolerance: ISO2 (6H) Spiral angle: 40° Suitable for steels up to approx. 900 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Standard: DIN 376C Form: C Application: blind‑hole threads Flanks: relieved FAQ What materials can be machined with this tap? The TECWERK machine tap is suitable for machining steels up to approx. 900 N/mm² tensile strength and is intended for typical workshop steel grades. Is the thread produced compatible with standard fasteners? Yes, the tap cuts a metric ISO thread M27 x 3 mm with ISO2 (6H) tolerance, giving a standard internal fit for ISO metric bolts and screws. Can this tap be used for blind holes only? The design, including the right‑hand 40° spiral, is optimised for blind holes, improving chip evacuation; it may also be used in certain through‑hole operations depending on machining conditions. What does Form C indicate for this tap? Form C denotes the specific chamfer and cutting geometry defined under the DIN standard, offering a balance between entry chamfer and machine‑use suitability for consistent thread starts. Which toolholder is appropriate for this tap? A holder or collet suitable for a 20 mm shank and capable of securing the required concentricity is recommended for best results with this tap. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co material and a Form B straight‑flute geometry with honed flanks for consistent thread quality and long tool life; order the tap directly via Metav Werkzeuge or request advice from our consultants. TECWERK machine tap MF 28×1.5 mm (DIN 374B) – HSS‑Co, tolerance 6H A TECWERK machine tap MF 28×1.5 mm engineered for cutting metric fine internal threads in steels up to approximately ~1000 N/mm², temper cast and long‑chipping non‑ferrous metals, suitable for machining centres and automated tapping units HSS‑Co for enhanced wear resistance Form B, straight flutes, honed flanks Metric MF 28×1.5 mm, tolerance 6H Lead cut for through‑hole threads Shank Ø20 mm for secure clamping Reliable cutting performance for demanding materials The tap is manufactured from HSS‑Co, a cobalt‑alloyed high‑speed steel that maintains hardness at elevated temperatures and extends tool life under intermittent cutting and higher feed rates. This material choice reduces wear when working in tougher steels and improves lifetime when machining long‑chipping non‑ferrous alloys. The HSS‑Co composition allows for reliable performance in serial production, lowering downtime and the need for frequent tool changes while supporting efficient cycle times on machine tools. Thread accuracy that reduces rework and assembly issues Designed to the DIN 13 specification and producing a metric MF 28×1.5 mm ISO fine thread with 6H tolerance, the tool delivers predictable dimensional results and repeatable fits. The honed flanks improve thread surface finish and contact quality, which helps to avoid galling and ensures consistent torque behaviour in assemblies. For quality‑sensitive applications, the reduced tolerance scatter leads to fewer rejects and less rework, contributing to a more economical production flow. Geometry and handling optimised for machine use The Form B design with straight flutes supports controlled chip formation in through‑hole tapping when combined with the lead cut for through‑hole threads; this promotes smooth chip evacuation and prevents clogging in longer production runs. A shank Ø20 mm provides a robust clamping interface for collets or toolholders, ensuring concentricity and minimising runout on automated tapping spindles. The combination of geometry and shank design aids process stability and simplifies integration into existing setups. Application contexts and practical benefits Suited to toolrooms, maintenance departments and industrial production lines, this tap is intended for both one‑off repairs and serial production where fine metric threads are required. It is appropriate for use in steels up to about ~1000 N/mm², temper cast materials and long‑chipping non‑ferrous metals, delivering a balance of durability and precision. The tap’s construction and finish help to conserve machine time and reduce tooling costs through extended service intervals and fewer rejects. For precision threading in industrial environments opt for the TECWERK machine tap MF 28×1.5 mm — contact Metav Werkzeuge in Emmerich for tailored advice or to place an order at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867279NW Manufacturer: TECWERK Packaging unit: 1 Facts Thread: MF 28×1.5 mm Shank Ø: 20 mm Tolerance: 6H Max material strength: ~1000 N/mm² Special features HSS‑Co material Form B, straight flutes Flanks honed Lead cut for through‑hole threads DIN 13 compliant FAQ What materials can be machined with this tap? The TECWERK machine tap MF 28×1.5 mm is suitable for steels up to approximately ~1000 N/mm², temper cast materials and long‑chipping non‑ferrous metals. Is the tap suitable for automated tapping units? Yes, the shank Ø20 mm and straight‑flute Form B geometry make the tap compatible with machine spindles and automated tapping heads where secure clamping and stable chip evacuation are required. What does the 6H tolerance mean for threaded assemblies? A 6H tolerance on the MF 28×1.5 mm thread indicates a standard internal thread class that provides a reliable fit for general engineering assemblies and predictable mating behaviour with external threads. Does the tool have a specific lead for through‑hole applications? The tap features a lead cut for through‑hole threads, which facilitates chip flow in through‑hole tapping and reduces the risk of chip packing in serial production. Which standard does the tap conform to? The thread form and dimensions are produced in accordance with DIN 13, ensuring compatibility with standard metric fine thread specifications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS‑Co PM construction with a HARDLUBE coating and a universal 2×D geometry delivers reliable metric threads and prolonged tool life; order the tap directly via Metav Werkzeuge or consult our technical team for cutting data. Machine tap M2×0.4 (DIN 371C) — HSS‑Co PM, HARDLUBE, 2×D (TECWERK) A machine tap M2×0.4 (DIN 371C) engineered for producing metric ISO blind threads across a wide range of materials in both workshop and production environments HSS‑Co PM material for high wear resistance HARDLUBE coating to reduce friction and build‑up Right‑hand spiral 40° for controlled chip evacuation DIN 371 2×D length optimised for blind holes Consistent thread quality and extended tool life The Machine tap M2×0.4 (DIN 371C) is manufactured from HSS‑Co PM, a powder‑metallurgy cobalt high‑speed steel that maintains hardness at elevated temperatures and increases resistance to wear. Combined with the HARDLUBE coating, friction at the cutting edge is lowered, which reduces chip adhesion and prolongs tool life. The result is repeatable metric ISO thread quality and a reduced need for frequent regrinding or replacement, supporting continuous production with fewer interruptions. Reliable performance in blind‑hole applications Designed to the DIN 371 2×D length, the tap features a right‑hand spiral 40° that actively channels chips away from the cutting zone, significantly lowering the risk of chip jamming in blind hole threads. The optimised cutting geometry and edge rounding assist in forming a clean flank and root, so holes finished with this tool show consistent form and fit. This focused geometry facilitates secure thread starts and improves process reliability when machining recessed or blind features. Versatile material compatibility for fewer tools As a universal Form C tap, the tool is suitable for machining steel, stainless steel, aluminium and copper alloys, as well as cast iron, enabling one tool to cover multiple applications. The combination of cobalt‑enriched substrate and specialised coating provides a balance between toughness and hardness, which helps when switching between workpiece materials. This versatility reduces inventory complexity and aids small batches or mixed‑material production runs. Practical design for production and workshop use The tap’s design follows standard norms, offering a tolerance field 6HX in accordance with DIN 13, sheet 1, and a shank Ø 2.8 mm compatible with common collet and holder systems. The Form C universal geometry and standardised dimensions make the tap straightforward to integrate into existing toolsets and automated processes. For machining planners, the standard conformity simplifies tool selection and ensures interchangeability across machines and fixtures. For precision threadmaking with proven wear resistance, request supply or cutting recommendations from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery or technical consultation. Technical Data Article number: 2000867989NW SKU: 2000867989NW Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M2×0.4 Length: DIN 371 (2×D) Shank diameter: 2.8 mm Spiral: right‑hand 40° Tolerance: 6HX Special features Material: HSS‑Co PM (powder metallurgy cobalt) Coating: HARDLUBE Type: Form C, universal Application: blind hole threads Suitable for: steel, stainless steel, aluminium alloys, copper alloys, cast iron Standards: DIN 13 sheet 1 FAQ What materials can the tap machine thread? The TECWERK machine tap M2×0.4 (DIN 371C) is suitable for steel, stainless steel, aluminium and copper alloys, as well as cast iron, thanks to its HSS‑Co PM substrate and HARDLUBE coating. Is this tap suitable for blind holes? Yes — the DIN 371 2×D length and right‑hand spiral 40° are specifically matched to blind‑hole threading to improve chip control and reduce the risk of jamming. How does the HARDLUBE coating benefit machining? HARDLUBE reduces friction and adhesion at the cutting edge, which lowers tool wear and helps maintain surface finish and dimensional stability when using the M2×0.4 machine tap. Which thread standard and tolerance does the tool meet? The tap produces metric ISO threads to DIN 13 sheet 1 and is manufactured to a tolerance field of 6HX, ensuring compatibility with standard metric fasteners. What are the key dimensional details of the tap (shank, length, SKU)? Shank Ø 2.8 mm, length DIN 371 (2×D), designation and article number SKU 2000867989NW for ordering and tool identification. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund