Take advantage of the tap's combination of HSS‑Co wear resistance, Form B straight flutes and a robust 20 mm shank for reliable pipe-thread production; order direct via Metav Werkzeuge or request advice from our consultants for application-specific guidance. TECWERK Machine Tap G 3/4" x 14 – HSS‑Co, Form B TECWERK Machine Tap G 3/4" x 14 is a dedicated machine tap for cutting Whitworth pipe threads (G) to DIN ISO 228, optimised for through-threading in medium-strength steels and temper cast iron. HSS‑Co for improved heat and wear resistance Form B straight flutes for machine tapping Whitworth pipe thread G to DIN ISO 228 Suitable for steels up to ≈1000 N/mm² Consistent performance where thread integrity matters Manufactured in a cobalt‑alloy high‑speed steel (HSS‑Co) grade, this machine tap is engineered for durability and thermal stability during continuous operation. The cobalt content increases hot hardness, which translates into longer tool life and fewer interruptions for tool changes. Using a Form B design with straight flutes provides controlled chip flow when producing standard Whitworth pipe threads, reducing the risk of thread distortion and ensuring repeatable, measurable results for production runs. Standards-compliant threads and secure machine mounting Conformity to ISO 228 guarantees compatibility with established Whitworth pipe fittings and gauges, which simplifies assembly and inspection procedures. The designation for through threads means the tool is intended to pass completely through the workpiece, avoiding the special geometry required for blind holes. A 20 mm shank enables secure clamping in common tapping holders and machine spindles, ensuring concentricity and reducing runout for more accurate thread profiles. Designed for common industrial materials This tap is specified for use in steels up to ≈1000 N/mm² tensile strength and in malleable (temper) cast iron, making it suitable for many hydraulic and pipework applications where Whitworth pipe threads are required. The relief‑ground flanks reduce cutting forces and support smoother engagement with the material, which helps to avoid galling and prolongs both tool and thread quality under repetitive use. Practical handling and workshop integration Ideal for production environments, the tool’s geometry and material combination reduce dressing frequency and support predictable replacement intervals. The straight‑fluted form eases chip evacuation in through‑thread operations and simplifies process planning. For best results, use appropriate cutting fluid and ensure the machine holder matches the 20 mm shank for correct alignment; the result is reliable, standard‑compliant pipe threads ready for assembly or sealing. Contact Metav Werkzeuge for tailored application advice and order the TECWERK machine tap from our Emmerich stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867504NW Manufacturer: TECWERK Packaging unit: 1 UID: 2000867504NW Core specifications Shank diameter: 20 mm Thread designation: G 3/4" x 14 tpi Material suitability: steels up to ≈1000 N/mm² Intended thread type: through threads Design & features Material: HSS‑Co Form: Form B, straight fluted Flank treatment: relief‑ground flanks Thread standard: Whitworth pipe thread G to DIN ISO 228 Application: for through threads, also suitable for temper cast iron FAQ What materials can this tap machine work with? The TECWERK machine tap G 3/4" x 14 is suitable for steels up to ≈1000 N/mm² and for malleable (temper) cast iron, as specified in the product data. Is this tap suitable for blind holes? This tap is designed for through threads; it is optimised for applications where the tap passes entirely through the workpiece rather than forming blind holes. What does Form B and straight flutes mean for production? Form B indicates a straight‑fluted machine tap geometry; straight flutes promote consistent chip evacuation in through‑threading and simplify machine setup for repetitive production. How does the HSS‑Co material affect tool life? The HSS‑Co composition improves hot hardness and wear resistance compared with standard HSS, resulting in longer life under continuous cutting and higher process reliability for the TECWERK tap. Which standard ensures compatibility with pipe fittings? Threads produced with this tap conform to DIN ISO 228, the Whitworth pipe thread (G) standard, ensuring compatibility with corresponding fittings and gauges. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

A high‑performance HSS‑Co composition combined with a vapourised, nitrided surface ensures extended tool life and consistent thread quality for demanding pipe fittings; the tap is optimised for Whitworth G 3/4" x 14 pipe threads and hard‑to‑machine stainless and heat‑resistant steels. Order the TECWERK tap directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Machine Pipe Tap DIN 5156B — HSS‑Co, Vapourised Surface TECWERK machine pipe tap for Whitworth G 3/4" x 14 threads, designed for through threading in stainless and other difficult‑to‑machine alloys HSS‑Co material for high cutting performance Vapourised, nitrided surface for longer tool life Straight flute and relieved flanks for reliable chip control Whitworth G 3/4" x 14 to DIN ISO 228 for pipe threads Robust cutting performance for demanding alloys The HSS‑Co composition combines high‑speed steel with cobalt to maintain hardness at elevated temperatures, which translates into sustained sharpness during long runs. For applications involving stainless steels and heat‑resistant alloys with tensile strengths above 850 N/mm², this material mix reduces wear and helps preserve thread form. The result is fewer tool changes and more predictable cycle times on production lines and maintenance tasks. Consistent thread quality and standard conformity Engineered for Whitworth G 3/4" x 14 pipe threads and manufactured to DIN ISO 228 tolerances, the tap produces reliable, standardised threads for pipe fittings and assemblies. The straight‑flute design combined with the through‑thread configuration supports uniform chip evacuation, which aids in achieving clean thread flanks and repeatable fitment. This makes the tool suitable for workshops and light industrial production where conformity and interchangeability are essential. Surface treatment and geometry that extend service life The tool is vapourised and nitrided, producing a hard, low‑friction surface that improves resistance to abrasion and adhesion. In combination with the straight flute and relieved flanks (flank honing), the surface treatment reduces built‑up edge and facilitates smoother cutting in sticky or work‑hardening materials. The blue identification ring signals the Type VA variant intended for corrosion‑resistant and heat‑resistant steels, simplifying inventory distinction. Practical workshop advantages and handling With a 20 mm shank, the tap fits robust holders and standard machine tool collets, ensuring secure clamping during spindle operation. The geometry and coating reduce torque peaks and vibrations, which benefits tool life and machine spindle bearings. For maintenance, installation and repeat jobs, the combination of material, treatment and form offers a practical balance between durability and thread accuracy, lowering downtime and supporting consistent assembly quality. For specification support or to secure the TECWERK DIN 5156B HSS‑Co G 3/4" x 14 tap for production use, contact Metav Werkzeuge — our consultants can confirm suitability and help with order placement Technical Data Article number: 2000867498NW Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 20 mm Thread: G 3/4" x 14 tpi Standard: DIN ISO 228 Special features HSS‑Co material Form B, Type VA Nitrided and vapourised surface Blue identification ring Straight fluted Relieved flanks Whitworth pipe thread G For through threads Suitable for hard‑to‑machine materials, e.g. stainless, acid‑ and heat‑resistant steels > 850 N/mm² FAQ What materials is this tap suitable for? The TECWERK machine pipe tap is designed for difficult‑to‑machine materials and is explicitly suitable for stainless, acid‑ and heat‑resistant steels with strengths above 850 N/mm², thanks to its HSS‑Co composition and surface treatment. Does the tap conform to a recognised standard for pipe threads? Yes — the tap produces Whitworth G 3/4" x 14 threads in accordance with DIN ISO 228, ensuring compatibility with standard pipe fittings. What is the shank size and how is the tool clamped? The tap features a 20 mm shank, suitable for machine tool holders and collets commonly used in workshop and production environments. How does the vapourised and nitrided surface benefit operation? The vapourised, nitrided finish increases surface hardness and reduces friction, which helps to minimise built‑up edge, extend tool life and improve overall thread quality when machining challenging alloys. Is this tool intended for through threads or blind holes? This variant is specified for through threads, optimising chip evacuation and thread form for pipe installations and through‑bore assemblies. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of HSS‑Co construction and a vapourised protective finish together with a universal Form C geometry to produce consistent Whitworth G 3/4" × 14 pipe threads with minimal rework; order directly via Metav Werkzeuge or consult their specialists for technical guidance. TECWERK machine tap DIN 5156C – G 3/4" × 14, HSS‑Co The TECWERK machine tap DIN 5156C G 3/4" × 14 is a universal cobalt high‑speed steel tap designed to produce Whitworth pipe threads (DIN ISO 228) in blind holes and standard bores across a wide range of workshop materials. HSS‑Co construction for high wear resistance Whitworth pipe thread G 3/4" × 14 Vapourised surface with green ring marking Suitable for steel, stainless and non‑ferrous metals High‑performance threading for consistent pipe connections The tapped thread quality is driven by the HSS‑Co substrate and the Form C, universal geometry which together deliver reliable thread form and long tool life. Conformity with DIN 5156C and DIN ISO 228 ensures compatibility with established Whitworth pipe systems, reducing the risk of misfits and sealing issues. This translates into fewer rejects and lower rework rates on assemblies where leak‑tight joints are essential. The combination of geometry and material enables efficient metal removal while maintaining the required pitch and flank form for durable pipe fittings. Material versatility that reduces tool inventory Designed for machining a broad range of materials, the tool performs well in steel, stainless steel, spheroidal cast iron and non‑ferrous metals, widening its applicability across general workshop and industrial applications. Using a single universal tap for multiple substrates reduces the need for frequent tool changes, streamlines setup procedures and lowers stocking complexity. The result is improved uptime on production lines and a simpler spare‑parts strategy for maintenance teams and small workshops alike. Geometry engineered for blind holes and controlled chips The tap features a 40° right‑hand helix and flank honing to promote chip control and reduce the tendency for jamming in enclosed holes. Intended for blind‑hole thread production, the honed flanks and helix angle assist chip evacuation and prevent premature wear at the cutting edges. The solid shank with 20 mm diameter offers secure clamping in standard holders, contributing to concentricity and repeatable thread accuracy when used on conventional tapping heads or CNC tapping spindles. Protective finish, clear marking and machine compatibility A vapourised surface treatment with a green ring marking increases surface hardness and wear resistance while helping to reduce galling in stainless materials. The universal Form C profile and the HSS‑Co material make the tool robust under moderate cutting conditions and compatible with a wide range of machine tool setups. Packaged as a single unit, the tap is ready for immediate integration into workshop tooling systems and supports efficient maintenance routines thanks to predictable service life and straightforward handling. Contact Metav Werkzeuge in Emmerich for technical advice and to secure the TECWERK HSS‑Co machine tap (SKU 2000867957NW) for reliable Whitworth G 3/4" × 14 pipe threading in workshop and industrial applications Technical Data Article number: 2000867957NW Product designation: Machine tap DIN 5156C G 3/4" × 14 Manufacturer: TECWERK Specifications Thread: G 3/4" × 14 (Whitworth) Shank diameter: 20 mm Helix angle: 40° right‑hand Standard: DIN 5156C / DIN ISO 228 Pack unit: 1 Special features Material: HSS‑Co Coating: vapourised (green ring) Form: C, universal type Flanks honed for improved finish For blind‑hole thread production Suitable for steel, stainless steel, spheroidal cast iron, non‑ferrous metals FAQ Which materials can be machined with this tap? The TECWERK machine tap is suitable for steel, stainless steel, spheroidal cast iron and a range of non‑ferrous metals, offering a versatile solution for mixed‑material workshops. Is the tool designed for blind‑hole threading? Yes. The tap is configured for blind‑hole applications, with flank honing and a 40° helix to support chip control and reduce the risk of jamming. What thread standard and size does the tap produce? The tool produces Whitworth pipe threads to DIN ISO 228 standard: G 3/4" × 14, complying with the DIN 5156C specification. Which machines or holders accept the shank? The solid shank with 20 mm diameter is compatible with standard collets and tool holders commonly used on tapping heads and CNC spindles for workshop and industrial equipment. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Made for reliable, repeatable pipe-threading in demanding production environments: the combination of cobalt-containing high-speed steel, a vapour-deposited coating and a 20 mm shank ensures long tool life, consistent thread form and stable machine mounting. Order the tool directly via Metav Werkzeuge or consult our technical team for application-specific advice. TECWERK G 3/4" x 14 HSS-Co Universal Machine Tap (DIN 5156B) – vapour-deposited coating, straight flute The TECWERK G 3/4" x 14 HSS-Co Universal Machine Tap is a machine-grade pipe-threading tool for producing Whitworth (G) threads to DIN ISO 228 in a wide range of workshop and industrial applications High-speed cobalt steel for long life Universal Form B for versatile threading Vapour-deposited coating with green ring Straight flute and relieved flanks for clean chips Consistent, industrial-grade threads with minimal rework Manufactured from HSS-Co, this tool is designed for high thermal resistance and extended edge retention on continuous production runs. The tap complies with DIN ISO 228 for Whitworth (G) thread geometry, which supports interchangeability and reliable joint sealing in pipework assemblies. The vapour-deposited coating provides improved surface hardness and wear resistance, so the tool maintains cutting performance over longer cycles and reduces the frequency of regrinding or replacement. Clean chip control and dependable through-threading The straight flute geometry combined with relieved flanks and a dedicated peel chamfer for through-threading yields controlled chip formation and safe evacuation during machining. This results in fewer stalled cycles, less thread damage and a reduced need for secondary finishing. For automated or semi-automated machinery where uninterrupted cycle times matter, the design helps maintain process stability and lowers scrap rates. Suitable for a broad range of workshop materials Engineered for versatility, the tool cuts effectively in steel, stainless steel, spheroidal cast iron and non-ferrous metals, covering the most common demands in maintenance and production shops. Its universal specification (Form B) enables a balance between performance and robustness, making it appropriate for general-purpose threading tasks without frequent tool changes. Material-specific process parameters should be adjusted to exploit the tool’s cobalt alloy and coating advantages. Machine integration and secure mounting for stable operation The solid design includes a 20 mm shank for positive clamping in standard collets and holders used on production machines. The tool’s universal machine-tap profile supports straightforward integration into tool lists and fixtures, enabling rapid changeovers and consistent concentricity. As a result, set-up times are shortened and part-to-part repeatability is improved, supporting efficient throughput on mid- to high-volume runs. For procurement or technical consultation on the TECWERK universal machine tap, contact Metav Werkzeuge for project-specific recommendations and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000867945NW Designation: Machine tap DIN 5156B, Whitworth G 3/4" x 14, HSS-Co, vapour-deposited coating, TECWERK Brand: TECWERK Facts Shank diameter: 20 mm Thread form: G 3/4" x 14 tpi Packaging unit: 1 Special features HSS-Co material Form B, type Universal Vapour-deposited coating (green ring) Straight flute Relieved flanks Peel chamfer for through-threading Conforms to DIN ISO 228 Suitable for steel, stainless steel, spheroidal cast iron, non-ferrous metals FAQ What materials can this machine tap cut reliably? The TECWERK machine tap is suitable for steel, stainless steel, spheroidal cast iron and various non‑ferrous metals, leveraging its HSS‑Co composition and vapour‑deposited coating for sustained performance. Which thread standard does the tap produce? The tool produces Whitworth pipe threads conforming to DIN ISO 228 for G 3/4" × 14, ensuring compatibility with standard pipe fittings. How does the peel chamfer benefit through-threading? The peel chamfer reduces entry forces and promotes controlled chip removal in through‑holes, improving thread integrity and cutting stability during continuous machining. Is the shank size compatible with standard machine holders? Yes, the 20 mm shank is intended for standard collets and holders, offering secure clamping and consistent concentricity on production equipment. What distinguishes Form B (Universal) for this tap? Form B provides a general-purpose balance between cutting aggressiveness and robustness, making the tap versatile across common threading tasks without specialised tooling. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from the combination of durable HSS‑Co construction, a nitrided and vapour‑treated surface and a straight‑fluted geometry that delivers consistent Whitworth pipe threads; order the TECWERK machine pipe thread tap via Metav Werkzeuge or consult our specialists for application advice. TECWERK machine pipe thread tap G 3/8" x 19 — HSS‑Co, vapour‑treated (DIN 5156B) The TECWERK machine pipe thread tap G 3/8" x 19 is a high‑performance tool for producing parallel Whitworth pipe threads to DIN ISO 228 in through‑hole applications, designed for demanding, hard‑to‑machine materials. HSS‑Co for enhanced heat resistance Nitrided and vapour‑treated surface Straight flutes with flank relief Whitworth G 3/8" to DIN ISO 228 Long life and consistent thread quality for demanding production Constructed from HSS‑Co, this machine tap combines cobalt‑alloyed high‑speed steel with surface hardening to resist heat and wear during continuous operation. The nitrided and vapour‑treated finish reduces friction and improves surface hardness, which translates into extended tool life and fewer tool changes on the shop floor. For production environments machining high‑strength workpieces, the result is a noticeable reduction in downtime and a stable thread geometry across long runs. Geometry that reduces forces and secures thread form The straight‑fluted design, together with flank relief, ensures controlled chip formation and reliable evacuation in through‑threading. Straight flutes are particularly effective for producing parallel pipe threads where spiral taps could distort the profile; the flank relief minimises contact on the thread flanks during cutting, lowering torque and the risk of seizure in tough materials. These features support repeatable process parameters and reduce the need for rework after tapping. Standards, compatibility and intended applications Engineered for Whitworth G pipe threads to DIN ISO 228, this tap is specified as Type B in DIN 5156B, with a nominal thread size of G 3/8" x 19 and a 12 mm shank for use with standard machine holders. It is intended for through‑threads and is suitable for hard‑to‑machine materials, including stainless, acid‑ and heat‑resistant steels with tensile strengths above 850 N/mm². The characteristic blue ring marking and vapourised surface finish make identification and handling straightforward in mixed‑tool environments. Purchase the TECWERK tap through Metav Werkzeuge for reliable supply from Emmerich and precise application support; for technical queries contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867495NW Designation: Machine pipe thread tap, DIN 5156B VA, G 3/8" x 19, HSS‑Co, vapour‑treated Manufacturer: TECWERK Core specifications Thread size: G 3/8" x 19 (Whitworth, 19 tpi) Shank diameter: 12 mm For through‑threads Special features HSS‑Co material Form B / Type VA Nitrided and vapour‑treated surface Blue ring identification Straight flutes Flank relief ground Surface finish: vapourised Suitable for hard‑to‑machine materials (e.g. stainless and heat‑resistant steels > 850 N/mm²) FAQ What thread standard does this tap produce? The tap produces Whitworth parallel pipe threads to DIN ISO 228; the designation is G 3/8" x 19. Which materials is the TECWERK tap suitable for? This TECWERK machine tap is intended for hard‑to‑machine materials, such as stainless, acid‑ and heat‑resistant steels with tensile strength above 850 N/mm². Can this tap be used for blind holes? The tool is specified for through‑threads; for blind‑hole applications a different flute geometry is normally recommended. What benefits does the vapour‑treated and nitrided finish provide? The nitrided and vapour‑treated surface increases wear resistance and reduces friction, extending tool life and improving thread quality in continuous production. What machine connection is required for the tool? The tap has a 12 mm shank and is intended for use with standard machine holders that accept this diameter; it conforms to DIN 5156B specifications. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine the durability of HSS‑Co with a thread geometry that meets DIN ISO 228, and benefit from a 12 mm shank for secure machine mounting; order the machine tap directly via Metav Werkzeuge or consult our specialists for application advice. Machine tap DIN 5156B G 3/8 in x 19 HSS‑Co ISO 228 – TECWERK A TECWERK machine tap designed for Whitworth (G) parallel pipe threads, offering straight flutes and relieved flanks for through-thread tapping in medium‑strength steels HSS‑Co for increased heat resistance and tool life Straight flutes with relieved flanks for reliable chip control Conforms to DIN ISO 228 for Whitworth (G) parallel threads Shank diameter 12 mm for secure clamping High‑precision pipe threads that keep production moving The Machine tap DIN 5156B G 3/8 in x 19 HSS‑Co ISO 228 TECWERK delivers consistent Whitworth (G) thread form in line with DIN ISO 228, ensuring interchangeability and leak‑tight assembly where parallel pipe threads are required. The combination of HSS‑Co grade and the specified geometry produces repeatable results in series production, reducing rework and downtime. By standardising on a tap that matches industrial thread norms, process reliability and inspection routines become simpler and less time‑consuming. Robust cutting geometry for cleaner chips and longer service life The tool’s Form B geometry with straight flutes and relieved flanks is engineered to balance cutting performance and chip evacuation when producing through threads. Straight flutes facilitate axial chip flow, which is advantageous in pipe threading where chips must not compact in the bore. The cobalt‑alloyed high‑speed steel provides higher red hardness than conventional HSS, which improves wear resistance under elevated temperatures. The 12 mm shank secures the tool in collets or holders and reduces run‑out, supporting precise thread profiles and extended tool life. Application scope and practical handling notes This tap is specified for use in steels up to ca. 1000 N/mm² tensile strength and in malleable cast iron, making it suitable for common workshop and industrial tasks that involve mechanical pipe connections. It is intended for through-thread applications and should be used with appropriate cutting fluid and controlled feed to maintain thread quality. For machines with compatible toolholders and sufficient rigidity, the tool offers dependable throughput; routine inspection and replacement according to wear criteria will preserve thread accuracy and component fit. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK machine tap into production processes or to discuss quantity and delivery from our Emmerich stock – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867502NW Product: Machine tap DIN 5156B G 3/8 in x 19 HSS‑Co ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Shank Ø: 12 mm Thread specification: G 3/8 (Whitworth pipe thread) to DIN ISO 228 Gg/1″: 19 Special features Material: cobalt high‑speed steel (HSS‑Co) Form B Straight flutes with flanks relieved (flank grinding) For through threads Suitable for steels up to ca. 1000 N/mm² and temper cast iron FAQ What materials is this tap suitable for? The Machine tap DIN 5156B G 3/8 in x 19 HSS‑Co ISO 228 (TECWERK, SKU 2000867502NW) is specified for steels up to ca. 1000 N/mm² tensile strength and for temper cast iron. Which thread standard does the tap produce? The tool produces a Whitworth (G) parallel pipe thread in accordance with DIN ISO 228, suitable for standardised pipe fittings. What does HSS‑Co mean and why is it used here? HSS‑Co signifies cobalt‑alloyed high‑speed steel; the alloy increases red hardness and wear resistance, which benefits the tap when cutting at higher temperatures or under continuous production. Is this tap intended for through threads or blind holes? The design and flute geometry are intended primarily for through‑thread tapping, where chip evacuation along the flute is required. What machine requirements should be considered before use? A rigid tapping setup and a matching collet or holder for the 12 mm shank are recommended to minimise run‑out and achieve accurate thread profiles. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine the durability of HSS‑Co with a universal straight‑flute design to produce precise Whitworth pipe threads G 3/8" × 19 in a range of engineering materials; order the tool directly via Metav Werkzeuge or consult our specialists for selection guidance. TECWERK machine tap DIN 5156B — G 3/8" × 19, HSS‑Co, vapourised The TECWERK machine tap DIN 5156B is a universal straight‑flute tapping tool designed for producing Whitworth pipe threads G 3/8" in steel, stainless steels, spheroidal graphite cast iron and non‑ferrous metals HSS‑Co for high wear resistance Whitworth pipe thread G to DIN ISO 228 Straight flutes with flank relief 12 mm shank for secure clamping High endurance for continuous production Built from HSS‑Co, this machine tap delivers increased wear resistance and consistent thread quality under continuous use. The vapourised treatment improves surface hardness and reduces built‑up edge, which translates into longer tool life and fewer interruptions in production. The universal geometry (Form B) offers a balance between robustness and cutting action, enabling predictable cycle times in repetitive machining processes. Such performance reduces downtime and supports stable process planning on milling or tapping heads. Clean chip control and precise Whitworth pipe threads The straight flutes combined with flank relief and a dedicated peel cutting edge for through threads ensure reliable chip evacuation and a defined thread profile. Conforming to DIN ISO 228, the tap produces parallel Whitworth pipe threads G 3/8" × 19, suitable where standard pipe fittings and seals are required. The straight‑flute design is particularly advantageous for through holes and helps to avoid chip packing; this yields a cleaner thread form and minimises rework in assembly operations. Versatile application and secure clamping Engineered for a wide material spectrum, the tool is suitable for steel, stainless steels, spheroidal graphite cast iron and non‑ferrous metals, making it a practical choice for mixed production runs. The 12 mm shank gives reliable retention in collets and tool holders, improving concentricity and reducing runout. As a universal tap, it is designed to simplify tooling inventories while maintaining the capacity to meet varied component specifications; the single‑piece packaging supports straightforward integration into workshop workflows. For dependable Whitworth pipe threading with TECWERK's HSS‑Co machine tap, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 2000867943NW Designation: Machine tap DIN 5156B Univ. G 3/8" × 19 HSS‑Co ISO 228 (TECWERK) Manufacturer: TECWERK Packaging unit: 1 Facts Shank diameter: 12 mm Thread: G 3/8" × 19 tpi Standard: DIN 5156B / DIN ISO 228 Special features HSS‑Co material Form B, universal type Vapourised surface treatment Green ring identification Straight fluted design Flanks relief‑ground Peel cutting edge for through threads Suitable for steel, stainless steels, spheroidal cast iron, non‑ferrous metals FAQ What thread form does this tap produce? The TECWERK machine tap DIN 5156B produces Whitworth pipe threads G 3/8" in accordance with DIN ISO 228, with a 19 tpi profile. Is the tap suitable for stainless steel? Yes, the HSS‑Co composition and flank relief of the tap make it suitable for machining stainless steels as listed in the product specification. What clamping size is required for this tap? The tool features a 12 mm shank and is intended for secure clamping in collets or tool holders that accept a 12 mm shank. Can this tap be used for through holes only? The tap includes a peel cutting edge designed for through threads but the universal geometry also permits use in standard through‑hole threading applications. Does the vapourised treatment require special maintenance? The vapourised surface improves wear resistance; standard care — cleaning and correct storage — is recommended to preserve the coating and cutting performance. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co construction, right‑hand 40° spiral for reliable chip evacuation, and a shank Ø 12 mm for secure clamping; order the TECWERK machine tap directly via Metav Werkzeuge or consult the Metav team for application advice. TECWERK machine tap DIN 5156C — Universal Whitworth G 3/8" x 19, HSS‑Co, vapour‑treated TECWERK machine tap DIN 5156C is a universal machine tap for Whitworth pipe threads (G) designed for blind‑hole tapping in demanding workshop and production environments. HSS‑Co for high wear resistance Whitworth G to DIN ISO 228 Right‑hand spiral 40° for chip control Shank Ø 12 mm, universal type Consistent cutting performance for production use The HSS‑Co composition ensures a high resistance to heat and abrasion during continuous tapping cycles, so the tool maintains profile accuracy under load. Manufactured in Form C as a universal type, the tap balances cutting strength and chip evacuation for a wide range of operations. The vapour‑treated surface improves tool life by reducing friction and offering improved wear characteristics, which in turn lowers tool change frequency and supports a steady production flow. Controlled chips and cleaner threads in blind holes A right‑hand spiral 40° directs chips back toward the hole entry, which is particularly effective when producing blind holes and reduces the risk of breakage. The flanks are honed to improve thread finish and decrease burr formation, resulting in cleaner internal threads and fewer rework steps. The thread form is Whitworth G manufactured to DIN ISO 228, a standard for parallel pipe threads that makes the tap suitable for reliable sealing and consistent mating with compatible components. Compatibility with a broad range of materials This machine tap is specified for use in steel, stainless steel, spheroidal cast iron and non‑ferrous metals, offering versatility across metalworking tasks. The cobalt‑alloyed high‑speed steel retains hardness at elevated temperatures, which assists in cutting tougher alloys and maintaining flank integrity. The tool’s green ring identification and universal geometry permit straightforward selection in mixed stockrooms and reduce sorting errors on fast‑moving shop floors. Practical design for seamless machine integration With a shank Ø 12 mm, the tap is easy to mount in standard collets and machine holders, providing secure clamping and concentricity for accurate threads. The universal profile and solid HSS‑Co material make it suitable for automated tapping cycles on machine spindles or tapping heads. Secondary benefits include improved cycle reliability and reduced tool inventory complexity thanks to the tap’s broad applicability and robust finish treatments. Choose the TECWERK HSS‑Co universal machine tap for robust thread production and contact Metav Werkzeuge for tailored technical advice or to specify the item — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for particular materials or machines. Technical data Article number: 2000867955NW Designation: Maschinengewindebohrer DIN 5156C Univ.G 3/8 Zollx19 HSS-Co vap.ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867955NW Facts Shank Ø: 12 mm Thread: G 3/8" x 19 Spiral angle: 40° Special features HSS‑Co material Form C, universal type Vapour‑treated surface Green ring identification Right‑hand spiral 40° Flanks honed for improved finish Whitworth pipe thread G to DIN ISO 228 For blind holes Suitable for steel, stainless steel, spheroidal cast iron and non‑ferrous metals FAQ What materials can this tap process effectively? The Maschinengewindebohrer DIN 5156C Univ.G 3/8" x19 HSS‑Co from TECWERK is specified for steel, stainless steel, spheroidal cast iron and non‑ferrous metals, offering broad material compatibility for general shop use. Is the thread standard compatible with BSPP fittings? Yes, the tap produces a Whitworth G thread to DIN ISO 228, which corresponds to parallel pipe threads commonly used for BSPP connections and compatible sealing systems when fitted correctly. How does the vapour treatment influence performance? The vapour‑treated surface on the TECWERK tap reduces friction and improves wear resistance, which extends tool life and helps maintain thread quality during longer production runs. Can this tap be used for blind holes on CNC machines? The right‑hand spiral and 40° helix of the TECWERK machine tap are optimised for blind holes, improving chip evacuation and reducing the risk of breakage during CNC tapping cycles. What clamping size is required for safe use? The tap features a shank Ø 12 mm, allowing secure clamping in standard collets and holders; always ensure concentric chucking and correct axial alignment for best results. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co durability, precision 6H tolerance and secure 22 mm shank clamping for reliable series tapping results. Order the machine tap M30 x 1.5 HSS‑Co (TECWERK) directly via Metav Werkzeuge or ask our consultants if needed. Machine tap DIN 374B M30 x 1.5 HSS‑Co, Form B – TECWERK The machine tap M30 x 1.5 for producing metric fine threads in production environments, suited to steels up to approx. 1000 N/mm² and long‑chipping non‑ferrous metals HSS‑Co for high wear resistance Form B, straight flutes for chip control Tolerance 6H for precision threads Shaft Ø 22 mm for secure clamping Precise, repeatable metric fine threads for series production The machine tap M30 x 1.5 is engineered for consistent creation of metric fine threads to DIN standards. The 6H tolerance class ensures tight, repeatable fits that reduce rework and minimise assembly variation — a clear advantage in batch production and component assembly. By using a tap matched to DIN 13, shop floors gain a verifiable baseline for thread accuracy; the specified tolerance and geometry support predictable process capability and make inspection and acceptance simpler for quality management. Cutting geometry and material choice for demanding applications Manufactured from HSS‑Co, this tap provides elevated heat and wear resistance compared with standard high‑speed steel, extending tool life in mixed production runs. The Form B geometry with straight flutes and flanks relieved improves chip formation and evacuation when machining alloys and long‑chipping non‑ferrous materials. These design choices translate into fewer tool changes and less downtime, supporting higher overall throughput and lower unit processing costs. For applications in medium‑strength steels and temperate cast irons the combination of cutter alloy and flute design balances cutting performance with tool durability. Reliable clamping and through‑thread performance for workshop integration A shaft Ø 22 mm provides a robust interface for standard machine collets and holders, reducing runout and improving stability under load. The tap’s cutting chamfer for through threads is optimised to start cleanly and reduce the risk of chip packing in through‑hole tapping, which aids uninterrupted threading cycles on automated machines. Supplied as a single unit per package, the tool integrates straightforwardly into existing tool sets and is suitable for both repetitive CNC operations and high‑precision manual machine tapping, supporting efficient workflow on the shop floor. Contact Metav Werkzeuge for tailored application advice and to order the TECWERK machine tap M30 x 1.5 HSS‑Co; telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: 2000867281NW Label: Maschinengewindebohrer DIN 374B MF30x1,5mm HSS-Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: M30 x 1.5 Tolerance: 6H Shaft diameter: 22 mm Standard: DIN 13 Special features Material: HSS‑Co Form B Straight flutes Flanks relieved Cutting chamfer for through threads Suitable for steels up to approx. 1000 N/mm² Suitable for temperate cast iron (Temperguss) Suitable for long‑chipping non‑ferrous metals FAQ What thread does the tap produce and to which standard does it conform? The tap produces a metric fine thread, M30 x 1.5, and is manufactured to the DIN 13 standard as specified for the TECWERK machine tap (SKU 2000867281NW). Which materials can be machined with this tap? The tool is suitable for machining steels up to approx. 1000 N/mm², temperate cast iron and long‑chipping non‑ferrous metals; the HSS‑Co composition supports enhanced wear resistance in these materials. How does the Form B geometry affect chip control? Form B with straight flutes promotes predictable chip formation and evacuation, reducing the chance of chip re‑cutting and improving cycle reliability for through‑hole threading. Is the shank size compatible with common machine holders? Yes, the shaft Ø 22 mm provides a secure clamping diameter compatible with standard collets and chucks used in production tapping equipment. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of high-temperature-resistant HSS‑Co construction, precise DIN 13 / tolerance class 6H threading and a stout shank Ø 22 mm for reliable machine tapping in production environments; order the tool directly via Metav Werkzeuge or consult the Metav specialists for application guidance. Machine Tap MF30x1.5 DIN 374C HSS‑Co 6H – TECWERK The Machine Tap MF30x1.5 DIN 374C HSS‑Co 6H TECWERK is a metric fine‑thread, machine-grade tap designed for producing blind threads in medium‑strength steels, malleable cast iron and long‑chipping non‑ferrous metals. HSS‑Co high hot‑hardness for durability Metric ISO fine thread MF30x1.5, tolerance 6H Right‑hand 40° helix for reliable chip control Flank‑ground cutting edges for improved thread quality Precision threading that protects assembly tolerances The tap is manufactured to DIN 374C and produces a metric ISO fine thread (MF30x1.5) with tolerance class 6H, ensuring consistently tight fits for components where axial play must be minimised. The tolerance specification is applied during production and guarantees interchangeability with standard nuts and threaded components used in industrial assemblies. This level of precision reduces scrap rates and supports predictable assembly performance in serial production. Geometry tailored to blind‑hole performance Equipped with Form C geometry and a right‑hand 40° helix, the tool is optimised for blind holes where controlled chip formation and evacuation are critical. The combination of helix angle and flank‑ground cutting edges produces short, manageable chips that are less likely to pack in the bottom of a blind thread, lowering tap breakage risk and improving cycle reliability. For machine operations, this geometry translates into more consistent thread quality and fewer interruptions to production. Material and build for sustained productivity Made from HSS‑Co, the tap offers improved hot hardness and wear resistance compared with standard high‑speed steel, which helps maintain cutting performance under elevated temperatures and repeated cycles. The tool is suitable for steels up to approx. 1000 N/mm² tensile strength, malleable cast iron and long‑chipping non‑ferrous metals, so one tool can cover several common workshop applications. A robust shank Ø 22 mm provides secure clamping in machine tool holders and reduces vibration, supporting longer tool life and stable cutting conditions. Practical guidance for reliable tapping results For best outcomes, match spindle speed and feed to the workpiece material and ensure appropriate lubrication for the chosen metal class; correct machining parameters assist the tool geometry to deliver clean threads without excessive wear. The tap is supplied in single‑unit packaging and is intended for machine tapping applications where repeatability is essential. When uncertainty remains about parameters for a specific alloy or workpiece geometry, Metav Werkzeuge can supply application guidance and recommended cutting data to integrate the tool into production workflows. For secure, high‑precision tapping with TECWERK quality, contact Metav Werkzeuge for ordering and technical advice—Metav Werkzeuge is available at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 2000867557NW Manufacturer: TECWERK Packing unit: 1 Facts Thread size: MF30x1.5 Tolerance class: 6H Shank diameter: 22 mm Helix angle: 40° Suitable tensile strength: up to approx. 1000 N/mm² Special features Material: HSS‑Co Standard: DIN 374C Form C geometry Right‑hand helix Flank‑ground cutting edges Designed for blind holes Application: steels, malleable cast iron, long‑chipping non‑ferrous metals FAQ Which thread does the tap produce and to which standard does it conform? The tap produces a metric fine thread MF30x1.5 and is manufactured to DIN 374C with tolerance class 6H, ensuring compatibility with standard ISO‑metric components. For which materials is this machine tap suitable? The TECWERK machine tap is suitable for steels up to approx. 1000 N/mm², malleable cast iron and long‑chipping non‑ferrous metals, as specified in the technical data. Is the tool intended for blind‑hole tapping? Yes, the tool’s Form C geometry and 40° helix are specifically chosen to improve chip control and reduce the risk of chip packing in blind holes. What is the shank diameter and how should it be clamped? The tap features a shank Ø 22 mm and should be securely clamped in an appropriate machine holder to minimise runout and vibration. What is the article number for ordering or reference? The article number is 2000867557NW and the product is listed as the Machine Tap MF30x1.5 DIN 374C HSS‑Co 6H by TECWERK. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of precise metric threads, robust HSS‑Co material and a secure 22 mm shank for reliable production results; order the tap directly via Metav Werkzeuge or consult the team for application guidance. Maschinengewindebohrer DIN 376C M30×3.5 mm – HSS‑Co machine tap with right‑hand spiral, TECWERK The Maschinengewindebohrer DIN 376C M30×3.5 mm is a machine tap designed for producing metric ISO threads in blind holes, combining cobalt‑alloy HSS for thermal durability with a 40° right‑hand spiral for controlled chip evacuation. HSS‑Co cobalt for high heat resistance Metric ISO thread M30×3.5 mm Right‑hand 40° spiral, Form C flanks Shank Ø 22 mm for secure clamping Consistent, ISO‑grade thread precision for production use The tool achieves M30×3.5 mm metric threads to DIN 13 sheet 1 standards with tolerance ISO2 (6H), delivering repeatable joint integrity for assemblies. Tight tolerance control reduces rework and minimises scrap by ensuring thread form and pitch match mating components; this is especially relevant where interchangeability and torque specifications matter. Specifying an ISO2 (6H) class provides a clear, industry‑recognised measure of fit quality, which supports downstream assembly processes and quality control documentation. Engineered material and geometry for challenging steel work Made from HSS‑Co (cobalt‑alloy high‑speed steel), the tap withstands the thermal and mechanical stress typical of machining medium‑high strength steels, specified for use in steels up to approximately 900 N/mm². The Form C geometry with flanks relieved and the right‑hand spiral 40° promote reliable chip formation and extraction when working blind holes, reducing the risk of chip packing. These design choices extend tool life and contribute to stable cycle times in serial production, supporting predictable throughput. Secure clamping and machine compatibility for low runout A shank Ø 22 mm offers a robust interface with standard taper adaptors or collet chucks, improving concentricity and reducing runout compared with smaller shanks. Improved clamping stability translates directly into cleaner thread flanks and reduced vibration, which in turn diminishes premature wear. The tool is intended for machine tapping operations; selecting appropriate holders and maintaining correct alignment will preserve the tap’s dimensional accuracy and surface finish. Practical application and maintenance to preserve performance The tap is optimised for blind hole tapping; the spiral lead and relieved flanks encourage chips to evacuate axially. For best results, apply suitable cutting fluid and monitored feed rates to balance chip control with cutting forces. Regular inspection of the thread profile and adherence to a replacement schedule will maintain process reliability. Supplied as a single unit, the tool integrates cleanly into production tool inventories and is suited to milling‑machine tapping heads and dedicated tapping centres where cycle repeatability is required. For specific machining recommendations or to secure procurement through Metav Werkzeuge — leveraging Metav’s European stock and quality assurance from Emmerich — contact the Metav Werkzeuge team for tailored advice and order placement. Technical Data Article number: 2000867392NW Product: Machine tap DIN 376C M30×3.5 mm, HSS‑Co, 6H, TECWERK Brand: TECWERK Facts Thread: M30×3.5 mm Tolerance class: ISO2 (6H) Standard: DIN 13 (sheet 1) Shank diameter: 22 mm Suitable material strength: up to approx. 900 N/mm² Special features Material: HSS‑Co (cobalt high‑speed steel) Geometry: Form C, flanks relieved Spiral: right‑hand spiral 40° Application: for blind‑hole tapping Packaging unit: 1 FAQ What materials can be machined with this tap? The Maschinengewindebohrer DIN 376C M30×3.5 mm (TECWERK) is specified for use in steels up to approximately 900 N/mm² and is suitable for a wide range of medium‑to‑high strength steel applications. Is this tap suitable for blind holes? Yes; the tool features a right‑hand spiral 40° and relieved flanks expressly designed for blind hole tapping to improve chip evacuation and reduce packing. What tolerance and standard does the tap meet? The tap produces metric threads to DIN 13 sheet 1 and conforms to ISO2 (6H) tolerance class, ensuring consistent assembly fits. Which shank size does the tool use and why does that matter? The shank Ø 22 mm provides a stable clamping interface to reduce runout and vibration, improving thread quality during machine tapping operations. How should the tap be maintained to maximise life? Regular inspection of thread form and timely replacement when wear is evident, coupled with appropriate cutting fluid and correct feed control, will preserve performance of the TECWERK machine tap. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of precise metric fine‑threading, cobalt‑alloy durability and blind‑hole capability for reliable production runs; order directly via Metav Werkzeuge or consult our specialists for application advice. Machine tap DIN 374C MF 30x2 mm HSS‑Co 6H — TECWERK, right‑hand spiral 40° The Machine Tap DIN 374C MF 30x2 mm HSS‑Co 6H is a precision metric fine‑thread tap designed for producing blind threads in medium‑to‑high‑strength steels, temper cast iron and long‑chipping non‑ferrous metals. DIN 374C Form C metric fine thread HSS‑Co for high wear resistance Right‑hand spiral 40° for blind holes Shaft Ø 22 mm for secure clamping Achieve consistently accurate fine threads with standardised tolerances Built to DIN 374C and matching the DIN 13 metric ISO fine‑thread system, this tap delivers repeatable thread geometry with a 6H tolerance. The standardised dimensions reduce assembly issues and rework by ensuring interchangeability with mating parts. For production environments where thread fit and functional reliability are critical, the combination of metric fine‑pitch specification MF 30x2 mm and precise tolerance control supports predictable assembly outcomes and improved first‑pass yield. Durable cobalt high‑speed steel construction lowers tooling costs Made from HSS‑Co, the tool provides increased hardness and heat resistance compared with standard high‑speed steel, improving performance when cutting harder materials. The cobalt alloy increases service life under elevated temperatures and sustained cutting loads, which translates into fewer tool changes and reduced machine downtime. When machining steels up to approximately 1000 N/mm², the material choice helps maintain sharp cutting edges and consistent surface finish, offering a cost‑effective balance between tool life and cutting performance. Optimised spiral and flank geometry for blind‑hole tapping The right‑hand spiral 40° and flank relief grinding are engineered to evacuate chips efficiently when forming blind threads, minimising chip packing and reducing the risk of thread damage. This geometry guides chips back into the flutes rather than forcing them deeper into the hole, so the thread form remains intact and the tapping cycle is more robust. Where blind holes are common, the spiral design enhances process stability and reduces scrap rates, improving overall production reliability. Machine compatibility and secure clamping for stable machining A shaft diameter of 22 mm provides a robust connection with standard machine holders, ensuring stable torque transmission and reduced run‑out during tapping. Classified as Form C, the tool is suitable for standard machine tapping operations and integrates readily into existing tapping workflows. The combination of secure clamping, standard form factor and compliance with ISO metric thread standards facilitates straightforward machine setup and consistent thread quality across batches. Choose the TECWERK machine tap for precise metric fine threads and contact Metav Werkzeuge in Emmerich for tailored application advice and reliable supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000867559NW Manufacturer: TECWERK Label: Maschinengewindebohrer DIN 374C MF30x2mm HSS‑Co 6H TECWERK Packing unit: 1 Core specifications Thread: MF 30x2 mm Tolerance: 6H Shaft diameter: 22 mm Spiral angle: 40° Suitable for steels up to approx. 1000 N/mm² Special features HSS‑Co Form C (DIN 374C) Flank ground Right‑hand spiral for blind holes For temper cast iron and long‑chipping non‑ferrous metals DIN 13 metric ISO fine thread FAQ What materials can be machined with this tap? The TECWERK machine tap is suitable for steels up to approx. 1000 N/mm², temper cast iron and long‑chipping non‑ferrous metals, as indicated by the HSS‑Co tool specification. Is this tap suitable for blind‑hole threading? Yes, the right‑hand spiral 40° and flank relief grinding are specifically designed to evacuate chips during blind‑hole tapping and to protect the thread form. What does the tolerance 6H mean for assembly? Tolerance 6H denotes a standard internal thread tolerance that ensures a reliable fit with corresponding external threads, supporting consistent assembly quality. How does the HSS‑Co material affect tool life? The cobalt‑alloy HSS‑Co increases heat resistance and hardness, extending tool life under higher cutting temperatures and when machining tougher materials. What size of machine holder is recommended? The tap features a shaft diameter of 22 mm, which is intended for secure clamping in compatible machine holders to reduce run‑out and ensure stable tapping. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of HSS‑Co construction and flank‑honed Form B geometry to achieve durable, precise metric fine threads; the integrated shearing cut for through‑holes reduces chip disturbance and thread damage. Order the tap directly via Metav Werkzeuge or contact consultants for application advice. Machine tap DIN 374B MF30x2mm (HSS‑Co, 6H) – TECWERK The Machine tap DIN 374B MF30x2mm is a straight‑fluted, cobalt high‑speed steel tap designed for producing metric fine internal threads in steels and long‑chip non‑ferrous metals. HSS‑Co for extended wear resistance Straight flutes, Form B geometry Tolerance field 6H for accurate fits Shank Ø 22 mm for rigid toolholding Optimised material and geometry for consistent thread quality The combination of HSS‑Co construction and Form B geometry delivers a balance of toughness and hardness that supports sustained cutting performance. The straight flutes are particularly suitable for through‑hole threading, where rapid chip ejection is needed to avoid jamming. Flank‑honed cutting edges reduce the risk of burr formation and improve the fit of the finished thread; together with the 6H tolerance, this ensures interchangeability with mating fasteners produced to DIN 13. The result is a reliable, repeatable process that reduces rework and inspection time. Performance across a range of workshop materials This threading tool is specified for use in steels up to 1000 N/mm², temper‑cast iron and long‑chip non‑ferrous metals, providing a versatile option for mixed production environments. The shearing cut (Schälanschnitt) is tailored for through‑hole applications: it shortens chips and minimises thread surface damage, which in turn reduces tool stresses and breakage. With a shank Ø 22 mm, the tool offers stable clamping in standard holders and machines, improving concentricity and lowering the likelihood of chatter during high‑speed cuts. Practical advantages in day‑to‑day use The straight‑fluted design and cobalt‑alloy HSS composition extend tool life under cyclic loads and higher cutting speeds compared with plain HSS. The toleranced MF30x2mm thread form provides fine pitch engagement for applications requiring greater load distribution or precise axial adjustment. Maintenance is straightforward: regular cleaning of flutes and proper lubrication extend life and maintain thread quality. Supplied as a single unit, the tap is ready for immediate integration into production lines and is compatible with common machining centres and tapping heads. For demanding fine‑thread machining tasks, choose the TECWERK MF30x2mm machine tap from Metav Werkzeuge; contact Metav Werkzeuge for tailored application support and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000867282NW Item: Machine tap DIN 374B MF30x2mm, HSS‑Co, tolerance 6H, TECWERK Packaging unit: 1 Facts Thread: MF30x2 mm Shank Ø: 22 mm Recommended material strength: up to 1000 N/mm² Special features HSS‑Co material Form B, straight flutes Flank‑honed cutting edges Shearing cut for through‑holes Suitable for steels, temper‑cast iron, long‑chip non‑ferrous metals FAQ What materials can be machined with this tap? The TECWERK machine tap MF30x2mm is suitable for steels up to 1000 N/mm², temper‑cast iron and long‑chip non‑ferrous metals. Is the thread tolerance suitable for interchangeable parts? Yes, the tap produces a metric fine thread to tolerance field 6H, providing interchangeability with standard mating fasteners. What is the advantage of the straight‑flute design? Straight flutes offer efficient chip evacuation for through‑hole tapping and reduce chip packing, which protects the thread form during cutting. How should the tap be clamped for best results? Use a rigid holder that accepts a 22 mm shank to ensure concentric clamping and minimise vibration during tapping operations. Is this tap appropriate for blind holes? The tool is optimised for through‑hole applications due to its shearing cut and straight‑flute design; for blind holes, alternative flute geometries may be preferable. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust combination of HSS‑Co toughness and precise Whitworth pipe-thread geometry for reliable series production. The tap's straight flute design and honed flanks reduce rework and extend service life. Order the machine thread tap directly via Metav Werkzeuge or consult our specialists for application support. Machine thread tap DIN 5156B G 1 1/4 in x 11 HSS‑Co ISO 228 — TECWERK The machine thread tap DIN 5156B G 1 1/4 in x 11 HSS‑Co ISO 228 is a straight‑fluted, Form B tap for producing parallel Whitworth pipe threads to ISO 228 in through‑thread applications HSS‑Co construction for long tool life Straight fluted Form B design for clear chip flow Whitworth pipe thread G to ISO 228 standard Suitable for steels up to approx. 1000 N/mm² Consistent, accurate Whitworth pipe threading for production use This tap delivers reproducible thread form in accordance with ISO 228, making it suitable for assembly lines and machine shops that require standardised parallel pipe threads. The HSS‑Co material increases hardness and wear resistance compared with plain high‑speed steel, which translates into longer tool life under continuous use. Because the design is for through threads, setups can be kept simple and cycle times reduced, supporting an efficient production flow with fewer tool changes. Durable geometry and surface finish reduce rework and downtime The Form B geometry combined with straight flutes provides reliable chip evacuation when threading longer workpieces or thin‑walled components. Flanks honed to a refined edge reduce the tendency to form burrs and improve the fit of mating parts, lowering post‑machining finishing. A substantial shank diameter of 32 mm ensures secure clamping in machine holders and contributes to dimensional stability during high‑load operations, which benefits repeatability across batches. Clear application range and material compatibility Designed for use in steels with tensile strengths up to approximately 1000 N/mm² and in malleable cast iron, this tap covers a broad range of common industrial materials. The G 1 1/4 in x 11 tpi specification refers to a parallel Whitworth pipe thread size frequently used in fluid and pneumatic systems; compliance with recognised standards simplifies quality control and inspection. The tap is intended for machine threading applications in commercial and industrial environments where standard pipe fittings are required. Integrating the tap into workshop practice with confidence Selecting a tool with proven geometry and robust material means fewer interruptions and a predictable tool lifecycle. Metav Werkzeuge positions itself as a precision partner with extensive inventory and logistics capacity, ensuring timely delivery from Emmerich and ongoing product availability. For technical clarifications about clamping, machine speed ranges or chip control strategies, consult the product documentation or contact Metav’s technical team for tailored advice. For reliable Whitworth pipe threading in serial production, choose the TECWERK machine thread tap and contact Metav Werkzeuge for application guidance and procurement at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867506NW Description: Machine thread tap DIN 5156B G 1 1/4 in x 11 HSS‑Co ISO 228 TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867506NW Core data Shank diameter: 32 mm Thread: G 1 1/4 in x 11 tpi Standard: DIN 5156B, ISO 228 Material: HSS‑Co (cobalt alloyed high‑speed steel) Special features Form B, straight fluted Flanks honed for reduced burr formation Whitworth pipe thread G (parallel) to ISO 228 For through threads Suitable for steels up to approx. 1000 N/mm² Suitable for malleable cast iron Machine tap design for secure clamping FAQ What thread standard does this tap produce? The tap produces parallel Whitworth pipe threads to ISO 228; the designation G 1 1/4 in x 11 tpi identifies the thread size and pitch. Which materials is the tap suitable for? This TECWERK machine thread tap (SKU 2000867506NW) is suitable for steels up to approx. 1000 N/mm² and for malleable cast iron as stated in the technical data. What does HSS‑Co mean for tool life? HSS‑Co indicates a cobalt‑alloyed high‑speed steel that offers improved heat resistance and wear performance compared with standard HSS, extending service life in demanding operations. Is the tap intended for blind holes or through threads? The tool is specified for through threads, which facilitates chip evacuation and reduces risk of tool breakage in continuous threading tasks. What clamping diameter is required? A shank diameter of 32 mm is specified; appropriate holders or collets that accept this diameter should be used to ensure stable, concentric clamping. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of cobalt HSS construction, precise DIN-specified geometry and robust shank design to streamline production and reduce rework; order the machine tap directly via Metav Werkzeuge or contact our consultants for detailed application guidance. TECWERK machine tap MF32x1.5 (DIN 374B, HSS‑Co, 6H) The TECWERK machine tap MF32x1.5 (DIN 374B, HSS‑Co, 6H) is a straight‑fluted machine tap for producing metric fine threads in through‑holes on production machinery and tapping heads Cobalt HSS (HSS‑Co) for improved wear resistance Straight flutes, flank relief for smoother chip flow DIN 374B, metric fine thread MF32x1.5, tolerance 6H Suitable for steels up to 1000 N/mm² and non‑ferrous metals Faster, more consistent threading with cobalt high‑performance steel The combination of HSS‑Co material and Form B geometry gives reliable cutting performance and extended tool life in industrial use. Cobalt alloying increases red hardness and edge stability, which maintains thread quality over longer production runs. The straight‑fluted design with flank relief improves chip evacuation, reducing the risk of thread damage and machine stoppages when machining medium‑strength steels. This results in fewer rejects and a more predictable production flow. Precise metric fine threads that meet industry tolerances Designed for metric ISO fine thread applications according to DIN 13, the tap produces accurate threads with the 6H tolerance class for repeatable assembly fits. The built‑in peel‑type chamfer for through‑hole threads ensures clean entry and exit, lowering the need for secondary finishing. For components requiring tight engagement and repeatable torque behaviour, this geometry helps secure consistent performance and reduces inspection overhead on finished parts. Machine‑ready shank and material compatibility for workshop integration With a shaft Ø 22 mm the tool fits standard machine holders and tapping heads used in production environments. The cutting geometry is suitable for a range of materials including steels up to 1000 N/mm², tempered cast iron and long‑chipping non‑ferrous metals, offering versatility across mixed production batches. The robust shank dimension and straight flute layout simplify clamping, helping to maintain concentricity and reduce chatter on high‑volume machines. Industrial standards and practical benefits for procurement and maintenance Compliance with DIN 374B and a clear specification of thread form, tolerance and material make tool selection and inventory management straightforward. The robust construction reduces frequency of replacement and supports cost‑efficient maintenance schedules. When combined with Metav’s supply reliability and broad product range, this tap contributes to a more streamlined procurement process and predictable machine uptime for workshops and production lines. For ordering or specific application advice on the TECWERK MF32x1.5 HSS‑Co machine tap, contact Metav Werkzeuge for prompt technical consultation and secure supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 2000867287NW Manufacturer: TECWERK Packaging unit: 1 Product name: Machine tap MF32x1.5 DIN 374B HSS‑Co 6H Core data Thread: MF32x1.5 (metric fine thread) Tolerance: 6H Shank Ø: 22 mm Suitable for steels up to approx. 1000 N/mm² Special features HSS‑Co material Form B Straight fluted Flanks honed (flank relief) Metric ISO fine thread (DIN 13) Peel‑type chamfer for through‑hole threads Suitable for tempered cast iron and long‑chipping non‑ferrous metals FAQ What thread form and tolerance does this tap produce? The TECWERK MF32x1.5 machine tap produces a metric ISO fine thread to DIN 13 with a 6H tolerance class. Which materials can be machined with this tap? This tap is suitable for steels up to approx. 1000 N/mm², tempered cast iron and long‑chipping non‑ferrous metals as specified for the tool. What is the shank diameter and is it compatible with standard holders? The tool has a shaft Ø 22 mm, compatible with common machine holders and tapping heads used in production environments. How does the tap manage chips during through‑hole threading? The straight‑flute geometry combined with a peel‑type chamfer improves chip evacuation for clean through‑hole thread formation and reduced risk of chip packing. Is the material specification HSS‑Co beneficial for high‑volume production? Yes, the HSS‑Co composition increases red hardness and wear resistance, supporting longer tool life in repeated production cycles. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS‑Co construction, a straight‑fluted Form B geometry and a sturdy 28 mm shank, this machine tap ensures durable, high‑precision production of metric fine threads; order directly via Metav Werkzeuge or consult our specialists for application advice. Machine tap DIN 374B MF36×1.5 HSS‑Co TECWERK – straight‑fluted machine tap with 28 mm shank The machine tap DIN 374B MF36×1.5 HSS‑Co TECWERK is designed for machining metric ISO fine threads in production environments, offering stability and repeatable tolerance in through‑hole applications. HSS‑Co cobalt alloy for higher wear resistance Straight‑fluted Form B for reliable chip evacuation Tolerance class 6H for precise fine threads Precision and productivity for fine‑thread series production The HSS‑Co construction combined with the DIN 13 geometry ensures consistent cutting performance across repeated cycles, reducing tool changes and downtime. The tap’s thread specification M36×1.5 with tolerance 6H yields tight, ISO‑compliant threads suitable for mechanical assemblies where interchangeability is required. Ground flank relief delivers clean thread flanks and reduces post‑process rework, while the cobalt alloy increases hot hardness and tool life under elevated cutting temperatures. Designed for through‑hole threading and reliable chip control The straight‑fluted Form B design paired with a peel chamfer makes the tool particularly effective for through threads, as chips are guided out of the hole rather than compacting. This geometry minimises the risk of chip jamming in long‑chip non‑ferrous metals and temper‑cast iron, resulting in fewer interrupted cycles and a smoother production flow. The shearing characteristics of the chamfer reduce cutting force peaks, which is beneficial when working at moderate feeds and in machines with varying rigidity. Machine compatibility and secure clamping for consistent results A 28 mm shank provides secure seating in collets or toolholders and improves concentricity for large‑diameter fine threads. The tool’s specifications support machining in steels up to approximately 1000 N/mm² tensile strength, malleable cast iron and long‑chip non‑ferrous alloys, making it versatile for maintenance, fabrication and series production. Built to DIN 374B standards, the tap integrates easily into established machining routines and supports efficient set‑up and reliable repeatability. For reliable fine‑thread machining with this TECWERK machine tap, contact Metav Werkzeuge for purchasing and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867289NW Manufacturer: TECWERK Facts Thread size: M36×1.5 Tolerance class: 6H Shank diameter: 28 mm Packaging unit: 1 Suitable for steels up to approximately 1000 N/mm² Special features HSS‑Co (cobalt alloy) material Form B, straight‑fluted design Flanks ground (flank relief) Metric ISO fine thread (MF) to DIN 13 Peel chamfer for through threads Suitable for temper‑cast iron and long‑chip non‑ferrous metals FAQ What is the thread size and tolerance of this tap? The tap produces an M36×1.5 metric fine thread with tolerance class 6H, ensuring ISO‑compatible fits for standard assemblies. Is this tool suitable for through‑hole threading? Yes, the TECWERK machine tap DIN 374B MF36×1.5 HSS‑Co is supplied with a peel chamfer for reliable chip evacuation in through threads. Which materials can be machined with this tap? The tool is designed for steels up to approximately 1000 N/mm² tensile strength, malleable cast iron and long‑chip non‑ferrous metals. What advantages does the 28 mm shank offer? A 28 mm shank provides robust clamping and improved concentricity, which supports consistent thread quality and reduces vibration during machining. Does the tap comply with recognised standards? The tap conforms to DIN 13 specifications for metric ISO fine threads and is manufactured to Form B straight‑flute geometry for production use. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of M3 x 0.5 mm thread accuracy, the wear resistance of HSS‑Co and the low friction of the TiN coating for dependable series production; order directly via Metav Werkzeuge or consult our specialists for application support. Machine tap DIN 371B, universal M3 x 0.5 mm, HSS‑Co TiN — TECWERK Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK is a universal straight‑flute threading tool designed for reliable machine tapping of metric threads in production and repair environments HSS‑Co alloy for high wear resistance TiN coating reduces friction and extends life Straight flutes for effective chip evacuation Tolerance ISO2 (6H) for standard metric fit Durable cutting performance for repetitive machining The combination of HSS‑Co substrate and TiN surface treatment yields a tool that resists abrasive wear while maintaining cutting geometry under load. The material choice allows stable cutting temperatures and longer intervals between tool changes; this translates into fewer production stops and more consistent cycle times when manufacturing metric threads such as M3 x 0.5 mm. The result is measurable efficiency gains for machining centres and automated tapping units. Reliable thread form and process stability Built to the Form B (universal) specification with straight flutes and relieved flanks, the thread cutter offers predictable chip control and reduced risk of jamming in through holes. The incorporated peeling chamfer for through threads assists chip formation and reduces burrs, improving first‑pass quality. Combined with the ISO2 (6H) tolerance class, the tool secures a standard internal thread fit that simplifies assembly and reduces rework in small‑thread applications. Versatile material compatibility to cut stock variety This machine tap is suitable for a wide range of materials — including steel, stainless steels, spheroidal cast iron and non‑ferrous metals — allowing consolidation of tooling across different jobs. The robust construction and geometry support both series production and maintenance tasks, lowering the need for multiple specialised taps. The compact shaft 3.5 mm and universal design make the tool easy to integrate into existing tapping heads and collets, helping workshops reduce inventory without sacrificing capability. Contact Metav Werkzeuge for tailored advice and immediate availability — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss supply from our Emmerich site Technical data Article number: 2000867696NW Label: Maschinengewindebohrer DIN 371B Univ.M3x0,5mm HSS-Co TiN 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M3 x 0.5 mm Shaft diameter: 3.5 mm Tolerance field: ISO2 (6H) Standard: DIN 13 sheet 1 Special features HSS‑Co material TiN coating Form B · Universal type Green ring · straight‑fluted · flanks relieved With peeling chamfer for through threads Suitable for steel, stainless steels, spheroidal cast iron and non‑ferrous metals FAQ What materials can be machined with the Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK? The Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK is suitable for steel, stainless steels, spheroidal cast iron and a range of non‑ferrous metals. Which thread standard and tolerance does the Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK meet? The Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK conforms to DIN 13 sheet 1 and uses the ISO2 (6H) tolerance field for a standard metric internal fit. How does the TiN coating help the Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK? The TiN coating on the Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK lowers friction, improves wear resistance and helps maintain cutting performance over longer production runs. Is the Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK suitable for through holes? Yes, the Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK features a peeling chamfer designed specifically to produce clean threads and facilitate chip evacuation in through‑hole tapping. What packaging and identification apply to the Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK (SKU 2000867696NW)? The Machine tap DIN 371B Univ. M3 x 0.5 mm HSS‑Co TiN 6H TECWERK (Article number 2000867696NW) is supplied in a packaging unit of 1. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from durable HSS‑Co construction and TiCN coating for longer tool life and stable thread form; the tap is engineered for M3×0.5 metric threads to DIN 371B with ISO2 (6H) tolerance for reliable assembly. Order the TECWERK machine tap directly via Metav Werkzeuge or consult our advisors for material‑specific recommendations. TECWERK machine tap DIN 371B VA M3×0.5 HSS‑Co TiCN 6H The TECWERK machine tap DIN 371B VA M3×0.5 HSS‑Co TiCN 6H is a straight‑flute, TiCN‑coated machine tap designed for producing through metric threads in stainless, acid‑resistant and heat‑resistant steels. HSS‑Co construction for improved durability TiCN coating reduces wear and extends life For through threads in stainless and heat‑resistant steels Shank Ø 3.5 mm for secure clamping Reliable thread quality for assembly and inspection The combination of DIN 371B geometry and ISO2 (6H) tolerance delivers a consistent thread profile for demanding assemblies. The tap's metric M3×0.5 pitch and the standardised form guarantee interchangeability with DIN‑conforming fasteners, reducing rework and quality checks. Where traceability and repeatable results matter, this machine tap secures a measurable production outcome and supports downstream inspection routines. Longer tool life and predictable process performance Manufactured from HSS‑Co and finished with a TiCN coating, the tool resists abrasive wear and thermal degradation during repetitive tapping. The TiCN coating lowers friction and promotes smoother chip evacuation with the straight‑flute geometry, while the pecking or peeling cut is optimised for through threads to avoid material build‑up. The net effect is fewer tool changes and steadier cycle times, improving overall process economy. Practical handling and material compatibility Feature details such as relieved flanks, a blue ring identification and a shank Ø 3.5 mm support secure clamping and quick visual sorting at the machine. The tap is specified for use in stainless, acid‑resistant and heat‑resistant steels up to 1000 N/mm² tensile strength, making it suitable for structural components, valves and fittings where corrosion resistance and strength are required. Clear labelling and standard shank diameter simplify integration into existing tool holders. For tailored application advice on TECWERK taps or to check stock levels, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — Metav's experts will recommend the right tap geometry and operational parameters for the intended material. Technical data SKU: 2000867516NW Item: Machine tap DIN 371B VA M3×0.5 HSS‑Co TiCN 6H TECWERK Packaging unit: 1 UID: 2000867516NW Core specifications Thread: M3×0.5 Tolerance: ISO2 (6H) Shank Ø: 3.5 mm Material strength limit: up to 1000 N/mm² Materials & features Material: HSS‑Co Coating: TiCN Geometry: Form B / Type VA, straight flutes Special features: blue ring identification, relieved flanks, peeling cut for through threads Standards: Metric ISO thread, DIN 13 sheet 1 FAQ What thread form and tolerance does this tap produce? The TECWERK machine tap produces a metric M3×0.5 thread to DIN 371B with an ISO2 (6H) tolerance suitable for standardised fastener fits. Which materials is the tap suitable for? This tap is specified for stainless, acid‑resistant and heat‑resistant steels up to 1000 N/mm² tensile strength and is therefore appropriate for demanding corrosion‑resistant applications. How does the TiCN coating benefit performance? The TiCN coating on the tap reduces friction and wear, improving tool life and enabling more consistent cutting performance when machining tough alloys. Is the tap suitable for through threads only? The tap features a peeling cut optimised for through threads, providing clean chip flow; it is configured primarily for through‑hole tapping applications. What shank size is required for clamping? The tap has a shank Ø 3.5 mm, which must be matched to the tool holder or collet for secure clamping. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑Co construction, a 40° right‑hand spiral and ISO2 (6H) tolerance to achieve consistent, high‑quality metric threads in blind holes; order directly via Metav Werkzeuge or consult our specialists for application guidance. Machine tap DIN 371C M3 x 0.5 HSS‑Co (Form C) – TECWERK The Machine tap DIN 371C M3 x 0.5 HSS‑Co is a precision cutting tool for creating metric ISO threads in blind holes, designed for use in medium‑strength steels and machining centres. HSS‑Co construction for high wear resistance Right‑hand spiral 40° for blind‑hole chip control Metric ISO M3 x 0.5, DIN 371C, ISO2 (6H) Shank Ø 3.5 mm for secure clamping Reliable metric threads for repeatable assembly quality This machine tap delivers predictable thread form for small‑diameter metric applications. Built to DIN 371C standards, the tool produces an M3 x 0.5 thread with an ISO2 (6H) tolerance, ensuring interchangeability and correct fit in production and repair work. The standardised geometry reduces rework and inspection time by delivering threads that meet common specification limits; for less experienced operators, the DIN reference provides a clear benchmark for quality and acceptance. Durability and cutting performance under load Manufactured from HSS‑Co, the tap combines high hardness with improved red hardness for extended tool life in interrupted cuts and higher temperatures. The Form C geometry and relieved flanks reduce friction at the cutting edges, which lowers torque peaks and extends service intervals. When machining steels up to approximately 900 N/mm², the tool sustains sharpness longer than standard high‑speed taps, translating into fewer tool changes and more uptime on the machine. Optimised chip control for blind‑hole threading The 40° right‑hand spiral clears chips axially away from the cutting zone, a decisive advantage when producing blind‑hole threads. This spiral angle helps prevent chip packing and reduces the risk of thread damage in confined depths. For operators, this means fewer failed threads and less time spent on remedial operations; for production managers, it translates into a more consistent yield on batches that include small threaded features. Machine integration and practical handling A shank diameter of 3.5 mm provides secure clamping in standard collets and chuck systems used in tapping spindles and tapping heads. The simplified clamping geometry improves concentricity and reduces run‑out, which supports accurate thread pitch and surface finish. The tool’s construction suits both CNC machining centres and automated tapping heads where consistent alignment and repeatable results are required. If there is any uncertainty about fitment, material suitability or machine setup, Metav Werkzeuge offers technical advice and data clarification; technical enquiries can be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930. Contact Metav Werkzeuge for tailored advice on TECWERK machine taps or to arrange supply from our Emmerich distribution centre. Technical data Article number: 2000867263NW Product: Maschinengewindebohrer DIN 371C M3x0,5mm HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M3 x 0.5 Standard: DIN 371C Tolerance: ISO2 (6H) Shank diameter: 3.5 mm Helix angle: 40° right‑hand Suitable up to: ca. 900 N/mm² (steel) Special features Material: HSS‑Co Form: C Flanks relieved For blind‑hole threading Metric ISO thread Designed for steel machining FAQ What materials can be machined with this tap? The TECWERK machine tap (Machine tap DIN 371C M3 x 0.5 HSS‑Co) is specified for use in steels up to approximately 900 N/mm²; the HSS‑Co composition provides improved wear resistance in such materials. Is this tap suitable for blind holes only? While optimised for blind‑hole threading thanks to the 40° spiral, the tap can also be used in through holes where the spiral helix assists chip evacuation. What does ISO2 (6H) tolerance mean for assembly? An ISO2 (6H) tolerance indicates a standard internal thread tolerance class that ensures interchangeability and a controlled clearance when paired with standard bolts or screws. How does the 40° right‑hand spiral help production? The 40° helix moves chips away from the cutting edge and out of the hole, reducing chip packing in blind holes and lowering the risk of thread defects during automated or manual tapping. What clamping requirements are recommended for this tool? The tap has a shank Ø 3.5 mm to suit standard collets and tapping spindles; secure, concentric clamping is recommended to minimise run‑out and preserve thread quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-performance HSS-Co construction with TiN coating and precise 6H tolerance for reliable blind-thread production in ferrous components; order directly via Metav Werkzeuge or consult the team for application guidance. Machine tap DIN 371C M3 × 0.5 HSS‑Co TiN (6H) by TECWERK The Machine tap DIN 371C M3 × 0.5 HSS‑Co TiN (6H) by TECWERK produces ISO metric M3 × 0.5 blind threads for medium-strength steels and workshop environments requiring repeatable thread quality Cobalt high-speed steel (HSS‑Co) body TiN coating for extended tool life Form C geometry, right‑hand 40° spiral Tolerance ISO2 (6H) for precise fit Consistent blind-thread performance for workshop series production The TECWERK tap is designed for reliable creation of blind holes with a geometry tailored to minimise plug‑up and improve chip evacuation. The combination of Form C fluting and a 40° right‑hand spiral supports controlled chip formation, reducing downtime for clearing swarf. This results in a measurable increase in processing stability when producing small ISO metric threads in batches, which is particularly relevant for component assembly processes that demand repeatable torque behaviour. Material compatibility and hard-use capability explained Constructed from HSS‑Co, the tool is suitable for machining steels up to 1000 N/mm² tensile strength, offering improved hot‑hardness compared with conventional high‑speed steels. The TiN coating reduces friction and wear, extending tool life under elevated cutting temperatures. For maintenance planning, this means fewer tool changes and lower cumulative tool cost per thread — a direct efficiency gain for production lines that balance cutting performance with predictable life cycles. Precision fit and tolerance control for secure assemblies The defined ISO2 (6H) tolerance class ensures thread accuracy compatible with standard ISO metric fasteners, giving assemblies consistent preload and reduced variability in joint strength. The relieved flanks provide a clean thread profile that eases installation while maintaining mechanical integrity. For quality assurance, the DIN 371C designation and referenced standards provide a verifiable basis for procurement decisions and process documentation. Practical integration into existing tooling systems With a shank Ø 3.5 mm, the tap is ready for collet or chuck mounting in conventional tapping spindles and CNC tapping heads, enabling straightforward integration into workshop tooling fixtures. The tool’s geometry and coating support stable operation in interrupted and continuous cuts, reducing the need for special cycle changes. For planners seeking predictable throughput, the tap offers an efficient balance of wear resistance and thread accuracy for small‑diameter metric threads. Contact Metav Werkzeuge in Emmerich for stock availability or technical clarification on the TECWERK M3 × 0.5 machine tap; call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and rapid supply. Technical Data SKU: 2000867311NW Article designation: Machine tap DIN 371C M3 × 0.5 HSS‑Co TiN 6H TECWERK Packing unit: 1 UID: 2000867311NW Facts Thread: M3 × 0.5 metric ISO Tolerance: ISO2 (6H) Material suitability: steels up to 1000 N/mm² tensile strength Shank diameter: 3.5 mm Spiral: right‑hand 40° Application: blind hole threads Special features Material: HSS‑Co (cobalt high‑speed steel) Coating: TiN (titanium nitride) Geometry: Form C Flank treatment: relieved flanks Standard reference: DIN 13 Sheet 1 FAQ What materials can this tap machine effectively cut? The TECWERK Machine tap DIN 371C M3 × 0.5 HSS‑Co TiN (6H) is specified for use in steels up to 1000 N/mm² tensile strength and is optimised for common ferrous workshop materials. Is the tap suitable for blind holes or through holes? The tool geometry and spiral angle are configured for blind hole threading, providing improved chip control in confined depths. What does the TiN coating provide in practice? The TiN coating on the TECWERK tap lowers friction and enhances wear resistance, which contributes to longer tool life and more consistent thread quality under elevated temperatures. How precise are the threads produced with this tap? Threads conform to ISO2 (6H) tolerance, delivering repeatable, standardised fit for metric fasteners and reliable joint performance. What mounting options are compatible with the tap’s shank? With a shank Ø 3.5 mm, the tap can be held in collets, chucks or dedicated tapping holders compatible with small‑diameter tooling. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS‑Co construction, a nitrided and vapourised surface finish and an ISO2 (6H) tolerance for reliable blind-thread production; order the tap directly via Metav Werkzeuge or consult the technical team for application advice. TECWERK Machine Tap DIN 371C M3×0.5 mm HSS‑Co, nitrided & vapourised A TECWERK Machine Tap DIN 371C M3×0.5 mm designed for accurate production of ISO metric blind threads in high-strength and corrosion‑resistant steels HSS‑Co alloy for high-temperature strength Nitrided and vapourised surface treatment DIN 371C form C for ISO metric threads Ground flanks and 40° right‑hand helix Consistent ISO threads for demanding materials The tap follows DIN 371C and produces M3×0.5 mm ISO metric threads to ISO2 (6H) tolerance, ensuring a precise fit for assemblies requiring tight clearances. Manufactured in HSS‑Co, the tool resists deformation at elevated temperatures and maintains cutting geometry under load. Compliance with recognised thread standards reduces inspection time and simplifies component interchangeability, which benefits production planning and quality assurance. Surface treatment that extends service life The combination of nitrided and vapourised surface treatment increases surface hardness and wear resistance, resulting in longer tool life during serial production. The treated flute surfaces improve chip flow and reduce adhesion on sticky alloys, while the ground flanks help to form clean thread flanks and lower the risk of burr formation. These characteristics translate into fewer tool changes and reduced rework rates for thread machining processes. Geometry optimised for blind holes and tough steels With a 40° right‑hand helix and a geometry tailored for blind holes, the tap evacuates chips reliably from short axial depths and minimises the chance of chip packing. The tool is specified for machining stainless, acid‑ and heat‑resistant steels with tensile strengths above 850 N/mm², offering a robust solution where conventional taps would wear prematurely. The geometry choices combine to produce repeatable, high‑quality threads even in challenging workpiece materials. Integration in machine workflows and handling The tool features a shank Ø 3.5 mm, suitable for standard machine tap holders and collet chucks used in production lines. This compact shank supports stable clamping and concentricity, contributing to accurate thread form and reduced runout. Specified as a machine tap for industrial tapping operations, it is suited to automated or semi‑automated workflows where throughput and reproducibility are priorities. Metav’s distribution ensures access to spare items and consistent stock levels for uninterrupted production. For reliable thread production with TECWERK machine taps and tailored application advice, contact Metav Werkzeuge for proximity support and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867273NW SKU: 2000867273NW Label: Maschinengewindebohrer DIN 371C VA M3x0,5mm HSS‑Co nitr.u.vapor.6H TECWERK Manufacturer: TECWERK Key measurements Thread size: M3×0.5 mm Shank diameter: 3.5 mm Helix angle: 40° Tolerance class: ISO2 (6H) Special features Material: HSS‑Co (cobalt high‑speed steel) Surface: nitrided and vapourised treatment Form: DIN 371C, Form C Application: blind holes Workpiece suitability: stainless, acid‑ and heat‑resistant steels > 850 N/mm² Flank type: flanks relief‑ground FAQ What thread standard does this tap comply with? The tap produces ISO metric threads to DIN 371C specifications with an ISO2 (6H) tolerance for precise fits. Is the tap suitable for blind holes in stainless steel? Yes, the TECWERK Machine Tap DIN 371C M3×0.5 mm is specifically designed for blind holes and for machining stainless and heat‑resistant steels with tensile strengths above 850 N/mm². What material is the tap made from and how does that help? The tool is made from HSS‑Co (cobalt high‑speed steel), which retains cutting performance at higher temperatures and extends tool life under heavy machining loads. How does the surface treatment affect performance? The nitrided and vapourised finish improves wear resistance and reduces adhesion of chips, which helps to maintain cutting geometry and reduces the frequency of tool changes. What clamping or holder sizes suit this tap? The tap has a shank Ø 3.5 mm, making it compatible with standard machine tap holders and collet systems commonly found on production equipment. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS‑Co strength, Form C geometry and an ISO2 (6H) tolerance, this machine tap delivers consistent, industry‑grade M3×0.5 threads in blind holes; order directly from Metav Werkzeuge or consult the technical advisors for application-specific guidance. Machine tap DIN 371C H M3×0.5 HSS‑Co 6H (TECWERK) — High‑performance tap for blind‑hole threading A machine tap DIN 371C M3×0.5 designed for reliable blind‑hole threading in high‑strength steels, featuring a 40° right‑hand spiral and precision ISO2 tolerance. HSS‑Co grade for hard steels Form C geometry with 40° spiral ISO2 (6H) tolerance for precise threads Designed for blind‑hole threading Precise threading where tolerance matters The HSS‑Co composition ensures elevated hot‑hardness and wear resistance, so the tap maintains cutting geometry under sustained load. With its ISO2 (6H) tolerance, the tool creates repeatable, standardised internal threads that fit mating parts without rework. This makes the threading tool particularly suitable for production environments where assembly reliability and interchangeability are critical. The construction minimises tool wear, which reduces downtime for replacements and helps maintain steady throughput on high‑mix benches. Optimised geometry for chip control in blind holes The Form C geometry and right‑hand spiral 40° promote controlled chip evacuation from blind holes, reducing the risk of chip packing and premature tool failure. Flank relief that is ground on the cutting edges improves the entry and exit behaviour in small‑diameter threads, translating into smoother thread generation and fewer rejects. For workshops processing hard‑to‑machine materials, this combination of geometry and helix angle reduces process variability and helps achieve consistent surface finish and thread form in confined hole depths. Application range and material compatibility Designed to produce M3×0.5 metric ISO threads to DIN 371C, the tap is specified for blind‑hole use and recommended for steels with high tensile strength (notably those above 1000 N/mm²) where conventional high‑speed tools would dull quickly. The compact shank and robust cutting material enable performance in batches as well as one‑off precision work. The tool is a pragmatic choice where high mechanical properties of the workpiece demand a tougher cutting grade than plain HSS. Integration into production and maintenance benefits A solid shank diameter of 3.5 mm supports secure clamping and stable concentricity in machine spindles, while the clear marking and standard DIN compliance simplify tooling logistics and inspection routines. Where efficiency is paramount, the durable HSS‑Co composition reduces the frequency of replacements and contributes to predictable operating costs. For purchasers seeking an integrated supply solution, Metav’s quality filter and logistics from Emmerich ensure consistent availability and traceability across orders. For robust M3×0.5 blind‑hole threading, choose the TECWERK HSS‑Co machine tap and order through Metav Werkzeuge in Emmerich — contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and fast supply. Technical Data Article number: 2000867283NW UID: 2000867283NW Product name: Machine tap DIN 371C H M3×0.5 HSS‑Co 6H TECWERK Manufacturer: TECWERK Packaging unit: 1 Data Thread size: M3 Thread pitch: 0.5 mm Standard: DIN 371C Tolerance: ISO2 (6H) Shank diameter: 3.5 mm Special features Material: HSS‑Co (cobalt high‑speed steel) Geometry: Form C, Type H Spiral: right‑hand spiral, 40° Flank relief: flanks ground Application: blind‑hole threading Marking: red ring (rotring) Suitable for: hard‑to‑machine steels > 1000 N/mm² Thread form: metric ISO thread, DIN 13 sheet 1 FAQ Is this tap suitable for blind holes only? The machine tap is specified for blind‑hole threading and its 40° spiral is optimised to evacuate chips from confined depths, reducing the risk of chip build‑up. Which thread specification does the tool produce? This tool produces M3×0.5 metric threads to DIN 371C with ISO2 (6H) tolerance for reliable assembly fit. What material is the tap made from and why is that important? The tap is manufactured from HSS‑Co (cobalt high‑speed steel), which provides higher hot‑hardness and wear resistance compared with standard HSS, making it suited to tough steels with tensile strengths above 1000 N/mm². Can the tap be clamped in standard collets and toolholders? The tool has a shank diameter of 3.5 mm, suitable for secure clamping in compatible collets and holders that accept that shank dimension. What is the article number for ordering and reference? The article number for ordering is 2000867283NW, listed as the machine tap DIN 371C H M3×0.5 HSS‑Co 6H by TECWERK. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co substrate combined with a nitrided and vapour‑coated surface for reliable thread production in high‑strength stainless and heat‑resistant steels; order directly via Metav Werkzeuge or consult our specialists if further machining data is required. TECWERK machine tap DIN 371B VA M3×0.5 HSS‑Co – nitrided and vapour‑coated for high‑strength steels TECWERK machine tap DIN 371B VA M3×0.5 HSS‑Co is a straight‑fluted machine tap designed for ISO metric M3×0.5 threads in demanding stainless and heat‑resistant steels HSS‑Co for high strength materials Nitrided and vapour‑coated surface finish Straight flute with flank relief ISO M3×0.5, tolerance ISO2 / 6H Consistent cutting performance for demanding alloys The tap delivers repeatable results when machining stainless and heat‑resistant steels with tensile strengths above >850 N/mm². The HSS‑Co composition provides higher hot hardness than standard high‑speed steels, which reduces wear when cutting tough alloys. The straight flute geometry and flank relief offer stable chip formation in through‑holes, while the identification blue ring and the compliance with DIN 13 ensure straightforward tool selection and process validation in production environments. Surface treatment and tool life that reduce downtime A combined nitrided and vapour‑coated treatment increases surface hardness and lowers friction at the cutting edge, extending service life under intermittent production conditions. This surface engineering reduces galling and adhesive wear when tapping corrosion‑resistant materials and therefore helps maintain thread tolerance over longer production runs. The design focuses on predictable consumption so tool change intervals can be planned, supporting efficient maintenance cycles and fewer unplanned stops. Standards and tolerance for assembly reliability Manufactured for ISO metric M3×0.5 threads to DIN 13 with tolerance field 6H (ISO2), the tap secures thread fit and interchangeability for fasteners and components. The integrated chip‑relief geometry and the through‑thread cutting chamfer simplify production of blind and through holes, ensuring reliable clamp and assembly behaviour. For customers specifying mechanical interchangeability, this tool supports conformity checks and traceable quality assurance across batches. Workshop handling and integration into processes The tool includes a 3.5 mm shank for secure clamping and is produced in the Form B straight‑flute style to suit automatic tapping spindles and toolholders. The measured, industrial‑grade construction eases integration into CNC and tapping stations without extensive parameter tuning. With documented material suitability and a consistent manufacturing standard, the tap allows machining planners to predict cycle times and maintain throughput with fewer trial cuts. For product availability or technical consultation on TECWERK machine taps, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to arrange supply or further machining data. Technical data Article number: 2000867203NW SKU: 2000867203NW Brand: TECWERK Numbers / Core technical data Thread: M3×0.5 Tolerance: ISO2 (6H) Shank diameter: 3.5 mm Material suitability: steels >850 N/mm² Special features / Versions Material: HSS‑Co Surface: nitrided and vapour‑coated Geometry: straight flute (Form B) Flank relief ground Identification: blue ring Standard: DIN 13 Sheet 1 Chamfer: peel‑cut for through threads FAQ What materials is this machine tap suitable for? The TECWERK machine tap DIN 371B VA M3×0.5 HSS‑Co is specified for stainless, acid‑ and heat‑resistant steels with strengths above 850 N/mm² and is manufactured to handle those alloys reliably. Which tolerance and standard does the tap conform to? Threads are produced to DIN 13 and tolerance field ISO2 (6H), ensuring interchangeability and compliance with common assembly requirements. What surface treatments are applied and what do they achieve? The tap is nitrided and vapour‑coated, which increases surface hardness and reduces friction to extend tool life when machining tough or adhesive materials. What is the shaft diameter and how is the tap clamped? The tool features a shank diameter of 3.5 mm, suitable for standard collets and tapping toolholders compatible with straight‑flute, Form B taps. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of high-performance HSS-Co construction with a TiCN surface and precise ISO2 (6H) tolerance to reduce rework and ensure reliable assembly. Order the TECWERK machine tap directly via Metav Werkzeuge or consult our specialists for application-specific advice. TECWERK Machine Tap M4×0.7 (DIN 371B, HSS‑Co, TiCN, 6H) TECWERK Machine Tap M4×0.7 — a straight‑fluted, Form B machine tap engineered for producing metric ISO through‑threads in corrosion‑ and heat‑resistant steels up to 1000 N/mm² HSS‑Co material with TiCN coating Straight‑fluted Form B for reliable chip evacuation ISO metric thread M4×0.7, tolerance 6H Suitable for stainless and heat‑resistant steels Consistent thread quality for assembly‑ready parts The TECWERK machine tap delivers reproducible thread form by combining a specified ISO metric thread M4×0.7 with the tighter ISO2 (6H) tolerance band. The flanks are precision ground, which stabilises the cutting geometry and minimises dimensional variation between batches. As a result, components enter assembly with fewer rejected parts and less post‑processing, supporting predictable cycle times and improved first‑pass yield. Efficient machining in demanding alloys Manufactured from HSS‑Co and finished with a TiCN coating, the tool excels when cutting corrosion‑, acid‑ and heat‑resistant steels up to 1000 N/mm². The straight flute geometry promotes controlled chip formation for through‑hole tapping, while the specialised peel chamfer reduces insertion torque for clean starts. Together, these features shorten machining cycles and lower the risk of tap breakage under elevated cutting forces. Reduced downtime through robust design and handling Durability is supported by a hardened core and wear‑resistant surface treatment, which extend tool life under continuous production use. The tap’s shank Ø 4.5 mm and clear identification via a blue ring simplify changeover and tool identification in toolholders. Maintenance is straightforward: predictable wear patterns make it easier to schedule replacements and keep spindle uptime high, thereby reducing overall production interruptions. Seamless integration into industrial workflows Conforming to DIN 371B and supplied as a Form B / Type VA geometry, the tap fits standard machining setups and inspection routines. The combination of standardisation and robust design supports automated manufacturing lines and mixed‑lot production. If application requirements need verification, Metav’s technical advisors can provide guidance on machine speeds, lubrication and clamping to ensure the tap performs optimally in each specific environment. Contact Metav Werkzeuge for tailored application advice and supply of TECWERK machine taps from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and fast delivery Technical Data Article number: 2000867517NW Packaging unit: 1 SKU: 2000867517NW Facts Thread: M4 × 0.7 mm Shank Ø: 4.5 mm Tolerance: ISO2 (6H) Strength capacity: up to 1000 N/mm² Special features Material: HSS‑Co Coating: TiCN Form: B, Type VA Flute: straight Flank: ground Chamfer: peel chamfer for through holes Standard: DIN 371B Identification: blue ring FAQ What materials can this tap machine through reliably? The TECWERK machine tap is suitable for corrosion‑, acid‑ and heat‑resistant steels and is specified for materials up to 1000 N/mm², making it appropriate for many stainless and high‑strength alloys. What does the TiCN coating provide? The TiCN coating on this tap improves wear resistance and reduces friction, extending tool life and helping to maintain consistent thread quality across longer production runs. Which tolerance class does the thread conform to? Threads produced with this tool meet the ISO2 (6H) tolerance class for metric threads, ensuring compatibility with standard mating components and reliable assembly fits. Is this tap suitable for through‑hole applications? Yes — the tap features a peel chamfer specifically designed for through‑threading, facilitating chip escape and lowering insertion torque for cleaner starts. What identification and handling features aid production use? The tap is supplied with a blue ring for quick visual identification and a 4.5 mm shank suited to common toolholders, which supports fast changeovers and orderly tool management. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund