LNHU080304-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the versatile WSP45G grade for stable edge life and reliable chip control in mixed‑material production. The combination of a robust chipbreaker F57T and a 0° negative rake gives predictable performance in interrupted cuts. Order the insert directly from Metav Werkzeuge or consult the advisers for tool selection. LNHU080304-F57T WSP45G — Milling insert, Tiger‑tec Gold, Walter Tools The LNHU080304-F57T WSP45G is a rectangular milling insert designed for flexible machining tasks across steel, stainless steel and heat‑resistant alloys, offering a balanced combination of edge stability and chip control. Tiger·tec Gold PVD-coated grade WSP45G Suitable for steel, stainless steel and superalloys Rectangular form with 0.4 mm corner radius Negative rake 0° for robust cutting action Predictable edge life for continuous production The Tiger·tec Gold WSP45G grade delivers a dependable compromise between wear resistance and toughness. The PVD-coated, coated carbide substrate resists flank wear while retaining a stable cutting edge under elevated temperatures, which supports longer tool life and fewer insert changes. For production environments where consistency matters, this translates to reduced downtime and more predictable cycle times. The 0.4 mm corner radius helps distribute cutting stresses, improving surface integrity on the workpiece. Reliable chip control and secure machining of difficult materials Equipped with the chipbreaker F57T, the insert promotes controlled chip formation even when machining tough alloys. The dedicated chip geometry reduces the risk of build‑up and secures evacuation, which is particularly beneficial when working with stainless steel or heat‑resistant superalloys that tend to form problematic chips. This stable chip management reduces rework and protects the cutting edge, enabling higher material removal rates without compromising finish. Robust design for interrupted and heavy cuts The 0° negative rake and rectangular form give the insert mechanical strength for interrupted cuts and heavier engagement. Negative rake geometry increases edge support and resists chipping under shock loading, making the insert suitable for milling operations where tool engagement varies. Combined with the tolerance class H and proven coated substrate, users benefit from a sturdy tool that maintains dimensional stability during demanding operations. Easy integration and wide application range With standard dimensions and a common ISO designation, the insert fits many conventional holders, simplifying tool setup and inventory management. The material group designation P / M / S confirms suitability for unalloyed and alloyed steels, stainless steel and high‑temperature alloys, offering versatility across mixed production batches. This flexibility supports lean tooling strategies and helps shops respond faster to varied customer demands. For machining challenges that require heat‑resistant, stable cutting edges, contact Metav Werkzeuge to discuss the Tiger‑tec Gold WSP45G insert and available sizes — email info@metav-werkzeuge.com or call +49 2822 7131930 to request tailored recommendations. Technical Data SKU: LNHU080304-F57T-WSP45G-WALTER Article designation: LNHU080304-F57T WSP45G Brand: Walter Tools Series: Tiger‑tec Gold Facts Material grade: WSP45G Applicable material groups: P / M / S Corner radius: 0.4 mm Rake angle: 0° (negative) Insert size: 08 Insert thickness: 03 Chipbreaker: F57T Tolerance class: H Designation suffix: U Special features Rectangular insert form Coated carbide (PVD) grade Versatile for steel, stainless steel and superalloys Optimised chip control for stable cutting Suitable for interrupted cuts FAQ What materials is the insert suitable for? The LNHU080304-F57T WSP45G insert is specified for groups P, M and S — in other words, steel, stainless steel and heat‑resistant superalloys — thanks to the Tiger·tec Gold coating and robust substrate. How does the chipbreaker F57T improve machining results? The F57T chipbreaker promotes controlled chip formation and evacuation, reducing the risk of build‑up on the edge and enabling safer machining of ductile and gummy materials with fewer surface defects. Is the negative‑rake geometry suitable for interrupted cuts? Yes. The 0° negative rake increases edge strength and resistance to chipping, making the insert well suited to interrupted milling and operations with varying engagement. Which series or coating does this insert belong to? This insert is part of the Tiger‑tec Gold series, a PVD‑coated, coated‑carbide technology developed for a balance of wear resistance and toughness. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and imply no affiliation between our company and the referenced manufacturers. The offered article is an original, factory‑new product of Walter Tools.
LNHU080404-B57T WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of durable coated carbide, precise geometry and excellent chip control to achieve consistent, productive cast iron milling. The insert's negative rake and robust chipbreaker deliver stable cutting and long tool life; order via Metav Werkzeuge or consult our specialists for application support. LNHU080404-B57T WKK25G — Indexable milling insert, Tiger‑tec Gold for cast iron — Walter Tools A LNHU080404-B57G WKK25G indexable milling insert engineered for high‑output machining of cast iron components, offering consistent wear resistance and reliable chip control in demanding industrial applications. Tiger‑tec Gold coating for extended wear resistance Optimised for cast iron machining (ISO K) Rectangular insert with 0.4 mm corner radius Negative 0° rake angle for robust cutting Improved productivity through advanced coating and grade The combination of the Tiger‑tec Gold coating and the WKK25G grade provides a balanced performance for abrasive cast iron work. The specialised coated carbide substrate reduces flank wear under interrupted cuts and short, breaking chips typical of cast iron, which in turn extends tool life and reduces machining downtime. For operations requiring repeatable results on grey and ductile cast iron, this configuration delivers measurable gains in process stability. Robust geometry that enhances chip control and surface quality A rectangular insert with a 0.4 mm corner radius and B57T chipbreaker offers controlled chip formation and evacuation when machining cast iron. The negative 0° rake angle increases cutting edge strength, making the insert suitable for heavier feeds and interrupted cuts without compromising surface finish. These geometric choices translate into fewer tool changes and more predictable component tolerances during serial production. Application guidance and material compatibility Designed specifically for the ISO group K (cast iron), the insert excels where high abrasive wear is expected. The WKK25G grade is optimised for the short, brittle chips of cast materials and provides a blend of hardness and fracture resistance. When paired with suitable cutter bodies and correct cutting parameters, the insert improves cycle times and delivers a consistent workpiece quality that supports lean manufacturing workflows. Durable design for industrial milling demands The insert’s construction supports high‑productivity milling strategies: the coated surface resists thermal and mechanical wear, while the robust cutting edge maintains integrity under variable loads. This makes the component a dependable choice for series production and repair tasks where repeatability and tool life are priorities. Integration into established tooling systems is straightforward thanks to the standard LNHU form factor. For tailored advice on integrating this Walter Tools Tiger‑tec Gold insert into specific machining processes or to confirm suitability for a particular cast iron grade, contact Metav Werkzeuge for application support and availability: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: LNHU080404-B57T-WKK25G-WALTER Designation: LNHU080404-B57T WKK25G Manufacturer: Walter Tools Core measurements Size: 08 Thickness: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Shape: Rectangular Tolerance class: H Materials and special features Series: Tiger‑tec Gold Grade: WKK25G Chipbreaker: B57T Material group: K (cast iron) Coated carbide insert, suited to abrasive cast iron machining FAQ What materials is this insert suitable for? The insert is designed for cast iron (ISO group K); the WKK25G grade and Tiger‑tec Gold coating optimise performance on abrasive cast materials. How does the B57T chipbreaker help in milling? The B57T chipbreaker shapes short, brittle chips typical of cast iron, improving evacuation and reducing the risk of built‑up edge, which helps maintain surface finish and tool life. What advantages does the negative 0° rake angle provide? A 0° (negative) rake angle increases cutting edge strength and resistance to fracturing, making the insert robust under interrupted cuts and heavier feed conditions. Is this insert compatible with standard LNHU toolholders? The insert follows the LNHU form factor and is intended for use in compatible indexable milling holders that accept rectangular insert geometry. How does the Tiger‑tec Gold coating affect productivity? The Tiger‑tec Gold coating enhances wear resistance and thermal stability, leading to longer tool life and more consistent machining cycles, especially in series production. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand: Walter Tools) is part of the Sandvik Group and is recognised for its precision cutting tools for metalworking. Protected trademarks and trade names are the property of their respective owners. There is no affiliation between our company and the mentioned brands; the offered article is original and factory‑new.
LNHU080404-B57T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust WKP35G grade and precise negative-rake geometry for consistent tool life and reliable chip control; order directly via Metav Werkzeuge or consult our experts for application-specific advice. LNHU080404-B57T WKP35G Fräswendeschneidplatte (milling indexable insert) by Walter Tools the LNHU080404-B57T WKP35G is a rectangular milling indexable insert designed for medium to heavy-duty milling in steel and cast iron applications Tiger·tec Gold coating for extended life Optimised for steel and cast iron machining 0° negative rake for secure cutting engagement Rectangular form with 0.4 mm corner radius Longer wear life through advanced coating technology The combination of the Tiger·tec Gold coating and the WKP35G grade delivers a measurable increase in productive cutting time. The advanced coated carbide composition stabilises the cutting edge under thermal stress, which directly reduces flank wear and prolongs service intervals. This means fewer insert changes and more continuous machining, which is particularly beneficial in high-volume production environments where predictable tool life supports planning and cost control. Reliable chip control and process stability for ferrous materials Designed for the ISO groups P and K, this insert is optimised for machining steel and cast iron, providing stable chip formation even under typical steel heat loads and abrasive cast-iron conditions. The integrated B57T chipbreaker geometry helps to break and evacuate chips reliably, reducing re-cutting and minimising surface damage. As a result, the cutting process becomes more consistent and reproducible, which supports higher throughput and better surface quality on finished parts. Geometry that improves cutting security and surface finish The rectangular form and the 0.4 mm corner radius combine with the 0° (negative) rake to deliver secure cutting engagement and enhanced edge strength. These geometric choices reduce the risk of chipping when interrupted cuts or varying depths of cut occur, and they contribute to a stable cutting force vector. The result is improved surface integrity and fewer rejects, making this insert a practical choice for applications requiring robust performance and repeatability. Practical selection and application guidance The insert thickness and form factor suit a broad range of tool holders and milling strategies; the negative rake profile is particularly effective where a strong edge is required or when facing interrupted cuts. The grade WKP35G is balanced for wear resistance and toughness, making it suitable for mixed-production environments. If assistance is needed to determine the optimal cutting data or matching holder, Metav Werkzeuge can provide cutting recommendations and material-specific parameters. Contact Metav Werkzeuge for tailored tooling advice and to secure the LNHU080404-B57T WKP35G for production use, ensuring fast availability and application support Technical data Article number: LNHU080404-B57T-WKP35G-WALTER Product: Fräswendeschneidplatte (milling indexable insert) Manufacturer: Walter Tools Facts Size: 08 Thickness: 4 mm Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: H Special features Grade: WKP35G Series: Tiger·tec Gold Chipbreaker: B57T Coating: Tiger·tec Gold (coated carbide) Suitable materials: steel (P), cast iron (K) Form: Rectangular FAQ What materials is this insert designed for? The LNHU080404-B57T WKP35G from Walter Tools is designed for machining steel (ISO group P) and cast iron (ISO group K), providing stability under the respective thermal and abrasive conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WKP35G grade improves wear resistance and thermal stability, which extends tool life and supports higher process reliability in continuous milling operations. What does the 0° negative rake mean in practice? A 0° (negative) rake increases edge strength and reduces the tendency for chipping during interrupted cuts, making the insert suitable for heavy engagement or unstable cutting conditions. Which chipbreaker is integrated, and what is its role? The insert features the B57T chipbreaker, which is engineered to control chip formation and evacuation, reducing re-cutting and helping to maintain consistent surface finish and process security. Can this insert be used in standard rectangular milling holders? Yes, the rectangular form and the 4 mm thickness are compatible with common holder types designed for LNHU-style inserts; specific holder selection should match the intended cutting parameters. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU080404-B57T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of a Tiger·tec Silver coating, a robust B57T chipbreaker and a 0° negative rake for consistent machining of steel and cast iron; order directly via Metav Werkzeuge or contact our consultants for cutting data and delivery options. LNHU080404-B57T WKP35S rectangular milling insert, Tiger·tec Silver, Walter Tools A LNHU080404-B57T WKP35S rectangular indexable milling insert designed for high‑productivity machining of steel and cast iron in demanding milling operations Tiger·tec Silver coated carbide grade For steel and cast iron (ISO P/K) Rectangular form 08, 0.4 mm corner radius Negative rake 0° for stable cutting Maximised productivity with controlled chip formation The insert combines the WKP35S grade with the Tiger·tec Silver coating to deliver reliable performance when machining ISO P/K materials. The coated carbide matrix resists thermal and abrasive wear, which helps to maintain cutting parameters at high spindle speeds. The result is more consistent material removal and reduced risk of unexpected wear, translating into predictable cycle times and fewer tool changes. Technical users will appreciate the clear link between coating technology and sustained productivity. Lower machining costs through longer tool life A 0° negative rake geometry and the B57T chipbreaker are optimised for short, controllable chips typical of cast iron and the heat‑developing behaviour of steels. This geometry contributes to a stable cutting edge and consistent surface finish, which reduces rework and extends time between indexings. The economic advantage is tangible on batch jobs: fewer interruptions and improved tool utilisation provide a rapid return on tooling investment while keeping process routines straightforward. Versatile geometry for dependable setups The rectangular 08 form with a 0.4 mm corner radius provides a balance between strength and edge definition, suitable for both roughing passes and finishing cuts where robustness matters. The insert thickness (04) supports secure clamping in compatible toolholders and ensures repeatable seating for accurate indexability. Such geometry minimises vibration and promotes dimensional stability, simplifying setup and supporting consistent part quality across runs. Practical integration and application guidance Designed for production environments, the indexable plate integrates smoothly into standard milling toolholders and is suited to a wide range of machining strategies. The combination of grade, chipbreaker and negative rake supports process reliability in mixed‑material workshops working mainly with steel and cast iron. If additional clarification of cutting parameters or recommended feeds and speeds is required, Metav Werkzeuge provides technical consulting to align the insert with specific machine and workpiece conditions. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools inserts like the LNHU080404-B57T WKP35S and for advice on optimal cutting data and availability Technical Data SKU: LNHU080404-B57T-WKP35S-WALTER Designation: LNHU080404-B57T WKP35S Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Dimensions & key figures Plate size: 08 Plate thickness: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: H Materials & features Coating: Tiger·tec Silver Grade / Sort: WKP35S Chipbreaker: B57T Form: Rectangular Execution: U Suitable for: Steel (P), Cast iron (K) Series: Tiger‑tec Silver FAQ What materials is this insert suitable for? The LNHU080404-B57T WKP35S insert is designed for machining steel (ISO P) and cast iron (ISO K), reflecting the WKP35S grade and Tiger·tec Silver coating. How does the B57T chipbreaker affect chip control? The B57T chipbreaker produces short, controlled chips ideal for cast iron and steels with typical chip‑breaking behaviour, improving evacuation and process stability during milling. What benefits does the 0° negative rake provide? A 0° negative rake increases edge strength and stability under heavy cut loads, helping to maintain surface quality and extend the time between indexings. Is the insert compatible with standard rectangular toolholders? The rectangular form 08 and thickness 04 make the insert compatible with holders designed for this geometry; correct clamping and seat condition ensure repeatable performance. Which coating technology is used and why is it important? The insert uses Tiger·tec Silver, a multilayer coating that enhances wear resistance and thermal stability, supporting higher productivity and more predictable tool life. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered article is original, brand‑new and supplied by the manufacturer, Walter Tools.
LNHU080404-B57T WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPP35G carbide grade for efficient, repeatable steel machining; the robust B57T chipbreaker and negative 0° rake support stable cutting and predictable tool life. Order or request cutting-data advice directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. LNHU080404-B57G WPP35G — Rectangular indexable milling insert, Tiger·tec Gold, for steel machining (0° negative rake) | Walter Tools The LNHU080404-B57T WPP35G is a rectangular milling indexable insert designed for productive steel machining; it combines a coated cemented-carbide grade with a dedicated chipbreaker and compact corner radius for consistent surface finish and process reliability. Tiger·tec Gold coated for high productivity WPP35G grade for steel machining Rectangular insert with 0.4 mm corner radius Negative 0° rake for robust cutting High-efficiency steel machining with Tiger·tec Gold The insert uses the Tiger·tec Gold coating together with the WPP35G grade to deliver high cutting performance on ISO P (steel) materials. This combination reduces flank wear and improves tool life, resulting in fewer indexings and less downtime. The coated cemented-carbide substrate promotes consistent edge behaviour under the temperatures typical of steel machining, so cycle times can be shortened without sacrificing component quality. For production environments seeking measurable productivity gains, the coated grade supports stable chip formation and reliable repeatability. Robust geometry for predictable results and surface quality A dedicated chipbreaker B57T and a 0.4 mm corner radius provide a balance between strength and finishing capability: the chipbreaker controls curl and evacuation, reducing risk of built-up edge, while the compact radius helps to maintain dimensional accuracy and minimise vibration. The rectangular plate form and negative 0° free angle enhance insert clamping stability, making this solution suitable for heavier radial engagement and roughing passes where consistent cutting forces are required. These geometric choices translate into fewer rejects, steadier surface finish and improved process stability on steels. Practical application guidance and process benefits The insert is intended primarily for machining steel (ISO P). The design supports both roughing and mixed rough/finish operations when combined with appropriate cutting data. Choosing the WPP35G grade brings a balance between wear resistance and toughness, which is particularly useful when batches include varying heat treatment states. For production planning, the predictable wear behaviour and the optimized chip control reduce tool-change frequency and support lower overall machining costs. If cutting parameters need tuning for specific grades of steel, Metav Werkzeuge can provide tailored recommendations and trial data to integrate the insert into existing machining cycles. For tailored cutting-data recommendations or to secure the Walter Tools LNHU080404-B57T WPP35G for a specific steel application, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LNHU080404-B57T-WPP35G-WALTER Label: Fräswendeschneidplatte LNHU080404-B57T WPP35G Walter Tools Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger-tec Gold Grade: WPP35G Data Plate size: 08 Plate thickness: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: H Special features Chipbreaker: B57T Plate form: Rechteck (rectangular) Execution: U Material application: Steel (ISO P) Coated cemented-carbide grade FAQ What materials is this insert suitable for? The Walter Tools LNHU080404-B57T WPP35G is specified for ISO P materials, primarily unalloyed and alloyed steel, leveraging the WPP35G grade and Tiger·tec Gold coating for these applications. How does the B57T chipbreaker affect machining? The B57T chipbreaker on the LNHU080404-B57T promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge during steel machining. Is the insert suitable for heavy roughing? Yes. The rectangular plate form combined with a negative 0° free angle and robust corner radius provides stable clamping and cutting-edge support suitable for higher radial engagements. What benefits does Tiger·tec Gold offer for production runs? Tiger·tec Gold coating enhances wear resistance and thermal stability, so the WPP35G grade maintains edge condition over longer cycles, supporting consistent part quality and fewer tool changes. Can Metav Werkzeuge provide cutting-data recommendations? Metav Werkzeuge offers tailored cutting-data advice for integrating the LNHU080404-B57T WPP35G into specific machining processes and can advise on feeds and speeds for different steel grades. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only; there is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
LNHU080404-F57T WKP25S Wendeplatten - Walter Tools
Benefit from the Tiger·tec Silver coating and WKP25S grade for extended tool life and consistent chip control in demanding operations; combine wear resistance and stable cutting for predictable productivity. Order the LNHU080404‑F57T WKP25S directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. LNHU080404-F57T LNHU080404-F57T WKP25S — Indexable milling insert for steel and cast iron (Walter Tools) A robust LNHU080404‑F57T WKP25S indexable milling insert designed for productive machining of steel and cast iron, featuring a Tiger·tec Silver coating and a dedicated chipbreaker geometry. Tiger·tec Silver coating for long tool life WKP25S grade for steel and cast iron Negative 0° rake for stable cutting 0.4 mm corner radius, rectangular form Consistent performance through advanced coating and grade The combination of Tiger·tec Silver coating and the WKP25S substrate offers a balance between toughness and abrasion resistance that translates into longer tool life and fewer tool changes. This composition specifically addresses the thermal and mechanical demands of machining steel and cast iron, reducing flank wear and improving dimensional consistency. The result is a measurable rise in uptime and predictable process behaviour, particularly in mixed‑batch production where repeatability is critical. Stable cutting and controlled chip formation for reliable machining A 0° rake (negative) geometry and the F57T chipbreaker are configured to deliver stable cutting conditions and effective chip control when machining medium to heavy sections. The rectangular plate shape combined with a 0.4 mm corner radius provides increased cutting edge strength and resistance to chipping, which is beneficial during interrupted cuts or when tool engagement varies. These features contribute directly to safer machining windows and reduced risk of unexpected tool failure. Practical benefits that improve throughput and quality Selecting this insert supports faster cycle times and consistent surface quality thanks to the engineered edge preparation and coating technology. Optimised for standard milling cutter bodies that accept the LNHU form factor, the insert helps maintain precision across runs while lowering the frequency of re‑grinds. For shops seeking cost‑effective productivity gains, the plate’s design reduces setup variability and simplifies insert inventory management without compromising on component finish. Contact Metav Werkzeuge for tailored recommendations on cutter compatibility and grade selection; Metav Werkzeuge’s consultants will advise on optimal cutting parameters for the LNHU080404‑F57T WKP25S and assist with immediate procurement. Technical Data SKU: LNHU080404-F57T-WKP25S-WALTER Article: LNHU080404-F57T WKP25S Product: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Rake angle: 0° (negative) Plate size: 08 Plate thickness: 04 Tolerance class: H Special features Coating series: Tiger·tec Silver Grade: WKP25S Application: Steel (P) and Cast iron (K) Chipbreaker: F57T Plate shape: Rectangular Execution: U FAQ What materials is this insert suitable for? The LNHU080404‑F57T WKP25S is specified for steel (P) and cast iron (K); the grade and coating are tuned for thermal and abrasive conditions typical of these groups. How does the 0° rake affect cutting performance? A 0° rake (negative) increases edge strength and stability, which is advantageous for interrupted cuts and heavy engagement; combined with the F57T chipbreaker, it supports reliable chip control. Is the insert compatible with standard LNHU toolholders? The insert follows the LNHU form factor and is intended for use in cutters that accept this ISO geometry; verify cutter compatibility before mounting. What are the main advantages of the Tiger·tec Silver coating? The Tiger·tec Silver coating provides increased wear resistance and thermal stability, extending edge life and supporting consistent surface finish over longer tool life. Can the insert be used for high‑speed machining? While optimised for robust performance in steel and cast iron, cutting speeds should be selected according to material and machine capability; the grade supports efficient machining within recommended parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the manufacturers named. The offered article is an original, factory‑new product of the manufacturer (Walter Tools).
LNHU080404-F57T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of sustained cutting performance, broad material versatility and reliable edge stability for consistent production results; order the insert directly via Metav Werkzeuge or consult the team for application advice. LNHU080404-F57T WKP35G indexable milling insert — Tiger‑tec Gold, for steel and cast iron (Walter Tools) LNHU080404-F57T WKP35G is an indexable milling insert designed for robust milling operations in steel and cast iron, offering a balance of wear resistance and predictable chip control Tiger‑tec Gold coating for long tool life Optimised WKP35G grade for steel and cast iron Rectangle geometry with 0.4 mm corner radius Negative 0° rake for stable cutting High-performance coating and grade for economical machining The combination of the Tiger‑tec Gold coating and the WKP35G substrate delivers a measurable improvement in tool life and process reliability. The advanced coating reduces abrasive wear during sustained cutting of P- and K-group materials, while the grade is tuned to maintain a stable cutting edge under typical steel and cast-iron heat loads. This results in fewer insert changes, lower tooling costs per part and more predictable machine utilisation. The description of the cut and chip formation is aligned with ISO 513 group designations, so material selection and cutting data can be matched to standardised recommendations. Geometry and edge design that support stable, repeatable cuts Rectangle geometry combined with a 0.4 mm corner radius and a negative 0° rake angle provides enhanced edge strength and vibration resistance in interrupted or heavy milling passes. The F57T chipbreaker is optimised for controlled chip formation in both unalloyed and alloyed steels and in cast iron, reducing recutting of chips and improving surface finish. Tolerance class H and the execution U ensure consistent seating and repeatability in compatible toolholders, supporting tight process windows and reproducible part quality in serial production. Practical benefits for workshop and production planning Selection of this insert supports both roughing and mixed finishing strategies where tool life and process security are priorities. The insert’s suitability for P and K workpieces means fewer tool variants are needed across mixed-material production runs, simplifying inventory and tool management. For detailed cutting data and application-specific feed and speed recommendations, Metav Werkzeuge provides technical support and further documentation; the insert’s coded designation helps ensure the correct holder geometry and clamping are chosen for safe operation. For application advice or to request batch availability of the LNHU080404-F57T WKP35G indexable milling insert from Walter Tools, contact Metav Werkzeuge for precise recommendations and delivery options Technical data Article number: LNHU080404-F57T-WKP35G-WALTER Designation: LNHU080404-F57T WKP35G Brand: Walter Tools Series: Tiger‑tec Gold Numbers / Core technical data Size code: 08 Thickness code: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Tolerance class: H Special features / Versions Grade: WKP35G Chipbreaker: F57T Geometry: Rectangle Execution: U Material suitability: P (steel), K (cast iron) Coating technology: Tiger‑tec Gold FAQ What materials is this insert suitable for? The LNHU080404-F57T WKP35G insert is specified for ISO groups P and K, meaning it is suitable for machining various steels and cast iron. What is the corner radius and why does it matter? This insert has a 0.4 mm corner radius, which increases edge strength and improves resistance to chipping during heavy or interrupted milling. Which chipbreaker is fitted and what does it do? The insert uses the F57T chipbreaker, engineered to control chip formation for both steel and cast-iron machining, helping to reduce recutting and improve surface finish. Is the insert coated and how does the coating help? Yes, the insert features Tiger‑tec Gold coating, which enhances wear resistance and thermal stability to extend tool life under demanding conditions. Which series and grade identify the insert’s performance level? The Tiger‑tec Gold series with WKP35G grade indicates a coated cemented carbide solution optimised for economical, productive machining in steel and cast iron. Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; support@walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
LNHU080404-F57T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, consistent chip control and stable cutting geometry to keep milling cycles efficient; order the LNHU080404-F57T WKP35S directly via Metav Werkzeuge or ask the consultants for application advice. LNHU080404-F57T WKP35S indexable milling insert, Tiger‑tec Silver, negative 0° rake — Walter Tools The LNHU080404-F57T WKP35S is an indexable milling insert designed for medium‑ to heavy‑duty milling of steel and cast iron, offering a rectangular shape and a dedicated chipbreaker for controlled material removal. Tiger‑tec Silver coating technology Grade WKP35S for steel and cast iron Rectangular insert, 0.4 mm corner radius 0° negative rake for stable cutting Productivity through engineered cutting performance This rectangular indexable insert is built around the WKP35S coated cemented carbide grade within the Tiger‑tec Silver series, delivering a balance of wear resistance and fracture toughness. The combination of a dedicated F57T chipbreaker and a 0° negative rake reduces radial and axial vibration, which in turn improves tool life and produces repeatable component quality. For manufacturing environments where cycle time and consistency matter, the engineered geometry enables higher sustained cutting parameters with fewer insert changes, supporting more efficient production flows and predictable maintenance intervals. Reliable chip control and surface quality for industrial applications The insert’s chipbreaker and 0.4 mm corner radius support stable chip formation when machining unalloyed and alloyed steel (ISO group P) as well as cast iron (ISO group K). Stable chip control reduces machine downtime from recutting and eases swarf handling, while the coated surface helps to maintain an even cutting edge under thermal load. The net effect is a measurable improvement in surface finish and dimensional stability on the workpiece, which benefits downstream processes such as heat treatment or assembly by reducing rework and inspection overhead. Practical selection and compatibility in tool systems As a rectangular, negative‑rake insert with a series‑specific grade, the component fits standard indexable milling toolholders designed for this insert geometry and tolerance. The tolerance class H and the thickness designation 04 ensure repeatable seating in hardened pockets, while the size designation 08 aligns the insert to compatible cutter bodies. When evaluating tool sets, the emphasis should be on matching the insert grade to the material group (P/K) and selecting holder geometries that maintain rigidity to exploit the insert’s wear characteristics and Tiger‑tec Silver coating advantages. Contact Metav Werkzeuge for tailored cutting data and toolholder recommendations for Walter Tools Tiger‑tec Silver inserts, and for rapid delivery and technical clarification. Technical Data Article number: LNHU080404-F57T-WKP35S-WALTER Description: Fräswendeschneidplatte LNHU080404-F57T WKP35S Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Grade: WKP35S Facts Size designation: 08 Thickness designation: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Tolerance class: H Special features Series: Tiger‑tec Silver Chipbreaker: F57T Shape: Rectangular Applicable materials: Steel (P), Cast iron (K) Coated cemented carbide grade FAQ What materials is this insert intended for? The LNHU080404-F57T WKP35S insert is specified for ISO material groups P (steel) and K (cast iron) and is optimised for the typical wear and chip behaviour of those groups. Does the insert require a special toolholder? No unique holder is required, but the insert must be used in a milling cutter designed for rectangular, negative‑rake inserts with the appropriate seating for the 04 thickness and 08 size designation. What is the benefit of the Tiger‑tec Silver technology? The Tiger‑tec Silver surface treatment on the WKP35S grade improves wear resistance and thermal stability, which translates into extended tool life and consistent cutting performance under higher cutting loads. How does the 0° negative rake affect cutting? A 0° negative rake increases edge strength and reduces the likelihood of chipping under interrupted or heavy cuts, providing stable machining conditions for tougher steel and cast iron applications. Is this insert suitable for finishing operations? While mainly designed for robust material removal and stability, the combination of chip control and corner radius can produce acceptable surface finishes; selection for finishing should consider feed, speed and toolholder rigidity. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
LNHU080404-F57T WPP35G U Wendeplatten - Walter Tools
Taking advantage of Tiger·tec Gold coating and the WPP35G carbide grade provides a durable, wear-resistant solution optimised for steel machining; the rectangular shape with a 0.4 mm corner radius and negative 0° rake ensures stable cutting and reliable chip control. Order the LNHU080404-F57T WPP35G insert directly via Metav Werkzeuge or consult the team for application advice. LNHU080404-F57T WPP35G — Milling indexable insert, Tiger·tec Gold, for steel — Walter Tools LNHU080404-F57T WPP35G is a rectangular milling indexable insert designed for stable steel machining, featuring the Tiger·tec Gold coated carbide grade for high process reliability. Tiger·tec Gold coating for long tool life Coated carbide grade WPP35G for steel Rectangular insert with 0.4 mm corner radius Negative 0° rake for stable cutting High-process reliability and predictable tool life with Tiger·tec Gold The Tiger·tec Gold series delivers consistent performance across steel applications; the coated carbide WPP35G is formulated for a balance of wear resistance and toughness, supporting both steady cuts and brief interruptions. This characteristic reduces unscheduled tool changes and contributes to a stable cutting edge, while the series design helps maintain surface quality and repeatable results. The insert’s specification targets ISO P materials, making it suitable where heat and typical steel chip formation must be managed effectively. Precise geometry for chip control and tool stability A rectangular plate geometry combined with a 0.4 mm corner radius and negative 0° rake results in robust cutting behaviour under varying loads. The geometry supports controlled chip formation and minimises vibration in medium-to-heavy cuts, which in turn improves dimensional consistency. The included chipbreaker designation F57T is tuned to aid evacuation for common steel grades; when paired with appropriate cutter bodies the insert contributes to predictable cycle times and reduced rework. Application advantages and integration into production This insert is optimised for steel machining and is a practical option where repeatable performance and reduced downtime are priorities. The coated grade is suited to varied steel subclasses, offering a compromise between wear resistance and toughness to handle typical interruptions in industrial environments. Integration into modular milling systems is straightforward thanks to the standardised insert size and thickness coding, allowing efficient stocking and simple changeover procedures that support continuous production flow. Contact Metav Werkzeuge today for availability and application recommendations for the Walter Tools Tiger·tec Gold LNHU080404-F57T WPP35G insert Technical data Article number: LNHU080404-F57T-WPP35G-WALTER Designation: LNHU080404-F57T WPP35G Brand: Walter Tools Core technical data Insert size: 08 Thickness code: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Special features Series: Tiger·tec Gold Grade: WPP35G (coated carbide) Chipbreaker: F57T Shape: Rectangular Application group: Steel (ISO P) Execution: U (negative geometry) FAQ What materials is this insert suitable for? The LNHU080404-F57T WPP35G insert from Walter Tools is specified for steel (ISO P) applications and is designed to manage the typical heat and chip formation associated with those materials. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold on the WPP35G grade provides improved wear resistance and edge stability, which helps extend tool life and maintain consistent surface finish during steel milling operations. What is the effect of the negative 0° rake on performance? The negative 0° rake increases edge strength and process stability during heavier or interrupted cuts, supporting secure chip control and minimising the risk of edge chipping under load. Is the corner radius suitable for finishing? The 0.4 mm corner radius balances robustness and finish capability; it supports reliable cutting with acceptable surface quality for many intermediate finishing tasks in steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is original, brand-new goods from the manufacturer.
LNHU080404-F57T WSM35G WSM35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WSM35G grade ensures secure chip formation and long edge life when machining demanding alloys; paired with a 0° negative rake and 0.4 mm corner radius, this insert supports consistent, productive milling of stainless steel and heat‑resistant superalloys. Order the LNHU080404-F57T WSM35G milling insert directly via Metav Werkzeuge or ask our consultants if needed. LNHU080404-F57T WSM35G milling indexable insert – Tiger·tec Gold, 0° negative rake (Walter Tools) The LNHU080404-F57T WSM35G is a rectangular milling indexable insert developed for robust chip control and edge stability during the machining of stainless steel and other difficult‑to‑cut alloys. Tiger·tec Gold coated cutting grade WSM35G Optimised chip control F57T geometry 0° negative rake, rectangular insert form 0.4 mm corner radius for robust edges High‑performance coating for consistent machining results The Tiger·tec Gold coating combined with the WSM35G grade provides a balance of heat resistance and wear protection that is especially beneficial when working with stainless steel and heat‑resistant superalloys. This coated cemented carbide composition supports a stable cutting edge under elevated temperatures and reduces the risk of build‑up on the tool flank. The result is a reproducible surface finish and predictable tool life, which simplifies process planning and reduces downtime caused by premature insert changes. Optimised chip control and secure cutting geometry The F57T chipbreaker geometry is engineered to produce controlled, segmented chips rather than long, tangled swarf, improving evacuation in interrupted cuts and deep pocketing. The combination of chipbreaker and the insert’s 0.4 mm corner radius maintains edge strength while enabling fine finishes in finishing passes. For milling operations requiring repeatable chip shape and reliable evacuation, this geometry reduces cycle times and supports higher productive feeds without compromising workpiece integrity. Robust negative rake and rectangular form for heavy cuts A 0° negative rake configuration increases the robustness of the cutting edge by distributing cutting forces across the insert body, which is beneficial for interrupted cuts, heavy radial engagement or unstable clamping conditions. The rectangular form delivers predictable seating in suitable toolholders and helps maintain alignment during index rotations, so less re‑adjustment is required. This construction is aimed at stable, repeatable performance in demanding milling tasks where edge stability is a priority. Application guidance for stainless steel and superalloys This indexable insert is particularly suitable for machining stainless steel and Group S alloys according to ISO classifications, where thermal resistance and edge security are paramount. Use the insert in tool assemblies and conditions that favour stable clamping and controlled cooling; the coated grade helps mitigate adhesion and heat‑related wear. For turning strategies that require chip segmentation, the F57T chipbreaker and rectangular shape support predictable results and simplified post‑process handling, improving overall process efficiency. Contact Metav Werkzeuge to specify Tiger·tec Gold inserts for stainless steel applications and to receive tailored recommendations for tooling and parameters Technical data Article number: LNHU080404-F57T-WSM35G-WALTER Manufacturer: Walter Tools Designation: LNHU080404-F57T WSM35G Product type: milling indexable insert Facts Plate size: 08 Plate thickness: 04 Corner radius: 0.4 mm Relief angle: 0° negative Tolerance class: H Special features Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: F57T Shape: rectangular Material suitability: stainless steel, heat‑resistant superalloys FAQ What materials is this insert suited for? The LNHU080404-F57T WSM35G insert from Walter Tools is designed primarily for stainless steel and heat‑resistant superalloys (ISO groups M and S), offering heat resistance and stable chip formation. How does the F57T chipbreaker improve milling performance? The F57T geometry produces segmented chips and promotes secure evacuation during milling; in combination with the WSM35G coating it reduces the risk of built‑up edge and supports consistent surface quality. Can the rectangular form be used in standard milling holders? Yes, the rectangular form of this indexable insert is compatible with suitable milling cutter bodies designed for rectangular inserts; correct toolholder seating ensures reliable indexing and repeatable results. What is the benefit of the 0° negative rake for heavy operations? A 0° negative rake increases edge robustness by distributing cutting forces more evenly, which is advantageous in interrupted cuts or heavy radial engagement and helps protect the cutting edge under severe conditions. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) is part of a leading global group for precision tools. Protected trademarks and product names are the property of their respective owners and are mentioned solely for explanation. The offered item is an original, factory‑new product of the manufacturer.
LNHU080404-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold WSP45G grade and the insert’s chip-control geometry for consistent, high-productivity milling across steel, stainless steel and superalloys; order the LNHU080404-F57T WSP45G milling insert directly via Metav Werkzeuge or ask our consultants if needed. LNHU080404-F57T WSP45G Milling Insert (Tiger·tec Gold) — Walter Tools The LNHU080404-F57T WSP45G is a PVD-coated carbide milling insert designed for versatile milling of steel, rostfreier Stahl and heat-resistant superalloys including titanium, optimised for stable chip formation and long cutting-edge life. Tiger·tec Gold PVD grade WSP45G Versatile for steel, stainless and superalloys Negative 0° rake for stable cutting Rectangular insert with 0.4 mm radius Maximum productivity for mixed-material batches The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a balance of toughness and wear resistance that supports reliable machining across mixed batches of steel, stainless steel and superalloys. The PVD-coated carbide composition improves thermal stability and reduces adhesion at the cutting edge, which means fewer interruptions for edge-related issues and more consistent cycle times. This translates into measurable process reliability when switching between different workpiece materials typical in job-shop and production settings. Geometry engineered for process security and chip control The insert’s rectangular form, F57T chipbreaker and 0.4 mm corner radius are designed to provide controllable chip formation and secure edge engagement. A negative 0° rake increases cutting-edge robustness under interrupted cuts and tough material conditions, reducing the risk of edge chipping. In practice, this means improved tolerance retention on complex contours and a lower scrap rate when machining demanding components, especially where stable chip flow and predictable tool behaviour are essential. Practical benefits for operation and tool management With a clear material designation for ISO groups P / M / S and the Tiger·tec Gold technology, the insert supports longer tool life and predictable wear progression, simplifying tool management and reducing set‑up variance. The insert’s design allows shops to concentrate fewer variants in inventory while covering a broad range of applications, supporting faster job changeovers and fewer tool changes. For engineers and operators, this reduces downtime and contributes to a more efficient workflow without compromising surface quality or dimensional accuracy. For demanding milling tasks, specify the Walter Tools Tiger·tec Gold WSP45G grade and consult Metav Werkzeuge for application advice or availability of compatible grades and geometries Technical data Article number: LNHU080404-F57T-WSP45G-WALTER Designation: LNHU080404-F57T WSP45G Type: Milling insert Manufacturer: Walter Tools Facts Corner radius: 0.4 mm Free rake angle: 0° (negative) Insert size: 08 Insert thickness: 04 Tolerance class: H Chipbreaker: F57T Special features Grade: WSP45G (Tiger·tec Gold, PVD-coated carbide) Material application: Steel (P), rostfreier Stahl (M), Superalloys/Titanium (S) Rectangular form Designed for stable chip formation and long tool life FAQ What materials can be machined with this insert? The LNHU080404-F57T WSP45G is specified for machining steel (P), rostfreier Stahl (M) and superalloys/titanium (S) in accordance with the grade’s intended ISO material groups. How does the Tiger·tec Gold WSP45G grade improve tool life? The Tiger·tec Gold PVD coating on the WSP45G grade enhances thermal stability and wear resistance, so the insert maintains a stable cutting edge for longer under varying cutting conditions. Is the negative 0° rake suitable for interrupted cuts? Yes, the negative 0° rake increases edge robustness, making the insert well suited to interrupted cutting and heavy engagement where edge strength is critical. What is the effect of the F57T chipbreaker? The F57T chipbreaker controls chip formation to aid evacuation and reduce the risk of built-up edge, improving surface finish and process reliability during milling. Can the insert be used for finishing operations? With its 0.4 mm corner radius and coated grade, the insert balances durability and surface quality; it is suitable for many finishing applications provided the geometry matches the required surface tolerance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU090404R-L55T WAK15 Wendeplatten - Walter Tools
Benefit from precise aluminium machining thanks to the sharp WAK15 grade and the insert's 0° negative rake; the rectangular form with a 0.4 mm corner radius ensures stable edge definition and predictable chip behaviour — order the LNHU090404R-L55T WAK15 directly via Metav Werkzeuge or consult the team for application guidance. LNHU090404R-L55T WAK15 rectangular milling insert, 0° negative rake — Walter Tools A LNHU090404R-L55T WAK15 rectangular indexable milling insert designed for high-quality machining of aluminium and other non‑ferrous metals in light to medium‑duty production. Optimised for aluminium and non‑ferrous metals Uncoated carbide grade WAK15 for sharp edges Rectangular insert with 0° negative rake 0.4 mm corner radius for fine edge definition Consistent surface quality for aluminium components The combination of the WAK15 uncoated carbide grade and a geometry tailored for non‑ferrous alloys delivers noticeably improved surface finishes when machining aluminium and similar materials. The sharp, wear‑resistant cutting edge reduces material adhesion and burr formation, which translates into fewer secondary operations and a more efficient production flow. As a result, components leave the machine with consistent tolerance adherence and reduced rework. Stable chip control and predictable tool life from dedicated geometry A rectangular form with a 0° negative rake and the L55T chipbreaker provide controlled chip formation and evacuation during milling. This geometry supports higher feeds where suitable, increasing material removal rates without compromising edge stability. The modest 0.4 mm corner radius helps maintain edge integrity under intermittent loading, offering a balance between edge strength and fine detail — particularly beneficial in profile milling and shoulder operations on soft metals. Seamless system integration for productive machining Belonging to the Walter N‑grade system, the insert is designed for reliable interchangeability and repeatable performance across a production cell. The execution marked U and tolerance class H ensure dimensional stability in tool holders and quick index changes, which reduces downtime and streamlines tool management. For shops seeking straightforward tooling solutions for non‑ferrous machining, this insert supports predictable cycle times and consistent part quality. Contact Metav Werkzeuge for application suggestions, availability and tailored recommendations for Walter Tools inserts — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: LNHU090404R-L55T-WAK15-WALTER Designation: LNHU090404R-L55T WAK15 Manufacturer: Walter Tools Series: Walter N‑grade system Grade: WAK15 (uncoated carbide) Execution: U Tolerance class: H Core data Corner radius: 0.4 mm Free rake angle: 0° (negative) Plate size: 09 Plate thickness: 04 Chipbreaker: L55T Special features Rectangular plate form Optimised for aluminium and non‑ferrous metals Uncoated carbide for very sharp edges Stable chip control for light to medium cuts Consistent indexability within Walter N system FAQ What materials is this insert suitable for? The LNHU090404R-L55T WAK15 is optimised for aluminium and other non‑ferrous metals; the WAK15 grade and geometry reduce material adhesion during machining. Is the insert coated? No, this insert uses an uncoated carbide grade (WAK15) to maintain very sharp cutting edges for non‑ferrous applications. What does the 0° negative rake mean in practice? A 0° negative rake offers a stable cutting edge with less tendency to deflect under load, improving edge life and process reliability in interrupted or heavier passes. How does the L55T chipbreaker influence performance? The L55T chipbreaker promotes controlled chip formation and evacuation, which supports higher productivity and reduces the risk of material build‑up on the cutting edge. Which tool system is this insert part of? This plate is part of the Walter N‑grade system, ensuring repeatable positioning and straightforward interchangeability in compatible tool holders. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
LNHU090404R-L55T WKK25G WKK25G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the wear-resistant WKK25G grade together with the stable negative rake geometry to increase uptime and reduce tool changes; order the insert directly via Metav Werkzeuge or consult our team for application advice. LNHU090404R-L55T WKK25G milling indexable insert, Tiger·tec Gold, for cast iron – Walter Tools LNHU090404R-L55G is a rectangular milling insert optimised for cast iron applications with a Tiger·tec Gold coating and a robust L55T chipbreaker Tiger·tec Gold coating for high wear resistance Optimised for cast iron machining Negative 0° rake for stable cutting Corner radius 0.4 mm for predictable edge strength Longer tool life and steady performance for abrasive cast iron work The combination of the Tiger·tec Gold coating and the WKK25G grade is engineered for cast iron, where abrasive wear and short, breaking chips are common. The coated cemented carbide substrate provides improved wear resistance, helping to extend tool life and reduce the frequency of index changes. This results in fewer interruptions to the production run and a clearer return on tooling investment. For shops moving from uncoated grades, the coating technology offers a measurable improvement in consistent cutting performance under abrasive conditions. Stable geometry for reliable chip control and surface quality A negative 0° rake and a defined corner radius 0.4 mm create a cutting geometry that favours stability in interrupted or heavy milling of cast iron. The chipbreaker L55T promotes controlled chip formation, reducing the risk of tangling and improving surface finish. In practice, the negative rake lowers the tendency for aggressive cutting edge wear and supports predictable cutting forces, which is especially beneficial on rugged cast-iron components and during heavy-duty axial engagement. These features combine to deliver repeatable results and reduced rework. Practical insert format that integrates easily and saves cost The rectangular, indexable insert design with size 09 and thickness 04 simplifies handling and mounting in compatible cutter bodies. Rectangular inserts offer straightforward clamping and a stable support surface, which helps maintain concentricity and repeatability in milling operations. Reduced downtime for tool changes and the ability to rotate or replace worn faces quickly contribute to lower operating costs. Where inventory rationalisation is a priority, the compatibility of these inserts with common toolholders makes them a pragmatic choice for production-oriented machine shops. For detailed application guidance or to procure the LNHU090404R-L55T WKK25G from Walter Tools, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific cast iron operations Technical Data Article number: LNHU090404R-L55T-WKK25G-WALTER Designation: LNHU090404R-L55T WKK25G Product type: Milling indexable insert Brand: Walter Tools Facts Plate size: 09 Plate thickness: 04 Corner radius: 0.4 mm Rake angle: 0° (negative) Tolerance class: H Special features Series: Tiger·tec Gold Grade: WKK25G (coated cemented carbide) Chipbreaker: L55T Shape: Rectangular Application: Suitable for cast iron machining FAQ What work materials is this insert designed for? The LNHU090404R-L55T WKK25G insert from Walter Tools is designed primarily for cast iron applications and is optimised for abrasive, breaking-chip behaviour typical of those materials. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the WKK25G grade reduces abrasive wear and improves tool life, enabling longer cutting intervals and more consistent surface quality when machining cast iron. What does a negative 0° rake mean in practice? A negative 0° rake provides a more robust cutting edge and increased stability during interrupted cuts, which helps to maintain consistent cutting forces and extend edge life on demanding cast-iron jobs. Is chip control satisfactory for medium-depth milling? Yes. The chipbreaker L55T is designed to promote reliable chip separation in cast iron, reducing the risk of entanglement and improving surface finish in medium to heavy milling passes. Can the insert be used in common cutter bodies and indexable systems? The rectangular format and standard size 09 / thickness 04 make the insert compatible with many conventional milling cutter bodies that accept this code, facilitating straightforward integration into existing tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU090404R-L55T WKP25S Wendeplatten - Walter Tools
Benefit from the combination of long tool life and stable chip control offered by the Tiger·tec Silver WKP25S grade together with a negative 0° rake and 0.4 mm corner radius for reliable milling of steel and cast iron. Order the LNHU090404R-L55T WKP25S insert directly via Metav Werkzeuge or request application advice from our consultants. LNHU090404R-L55T WKP25S — Milling indexable insert, Tiger·tec Silver, 0.4 mm radius (Walter Tools) LNHU090404R-L55S WKP25S is a rectangular milling indexable insert designed for productive machining of steel and cast iron in demanding industrial applications Tiger·tec Silver coating for longer tool life Optimised for steel and cast iron machining Negative 0° rake for stable cutting forces 0.4 mm corner radius for controlled surface finish High-performance coating and robust grade for consistent productivity The Tiger·tec Silver coating paired with the WKP25S coated carbide grade delivers a balance of wear resistance and toughness specifically engineered for machining steel and cast iron. As a milling indexable insert with a rectangular form and a sturdy geometry, it helps maintain cutting-edge stability under variable cutting conditions. The coated substrate reduces abrasive wear and improves heat resistance, which in turn supports longer tool life and fewer tool changes during production runs. The result is a measurable increase in machine uptime and process reliability. Predictable chip formation and surface quality thanks to geometry Equipped with the chipbreaker L55T and a corner radius 0.4 mm, this insert promotes controlled chip formation and consistent surface finish. The negative 0° rake produces stable cutting forces, which is advantageous when machining interrupted cuts or heavier engagement depths. For users less familiar with insert geometry: a smaller corner radius concentrates cutting forces for robust material removal while still enabling acceptable surface finish; the chipbreaker channels and breaks chips to avoid entanglement and protect the component surface. These design elements combine to reduce rework and improve first-pass part quality. Designed for process security in serial and jobbing work With tolerance class H and a rectangular plate form, the insert supports repeatable clamping and positioning in modern milling holders, aiding precise batch-to-batch performance. The size and thickness codes correspond to standard toolholder systems, allowing straightforward integration into existing tool sets. Where stable repeatability and reduced downtime are priorities, the combination of coated carbide grade, negative geometry and optimised chip control contributes to predictable tool behaviour and consistent component finish—even across mixed-series production or varying workpiece alloys. For precision milling in steel and cast iron, specify the Walter Tools Tiger·tec Silver insert LNHU090404R-L55T WKP25S and contact Metav Werkzeuge for tailored application guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: LNHU090404R-L55T-WKP25S-WALTER Designation: LNHU090404R-L55T WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Core data Insert size: 09 Plate thickness: 04 Corner radius: 0.4 mm Free angle: 0° (negative) Tolerance class: H Special features Coating: Tiger·tec Silver Grade: WKP25S Chipbreaker: L55T Applicable materials: steel (P), cast iron (K) Plate form: rectangular Geometry: negative rake FAQ What materials is this insert suitable for? The LNHU090404R-L55T WKP25S insert is formulated for machining steel (P) and cast iron (K), reflecting the WKP25S grade’s balance between wear resistance and toughness. What does the WKP25S designation indicate? WKP25S identifies the Walter Tools carbide grade within the Tiger·tec Silver family, a coated carbide designed to combine abrasion resistance with reliable performance on steel and cast iron. How does the 0.4 mm corner radius affect the finished part? A 0.4 mm corner radius offers a compromise between robust cutting edge strength and surface finish quality; it supports stable material removal while delivering a controlled edge profile on the workpiece. Why is a negative 0° rake used for this insert? The negative 0° rake increases edge strength and supports stable cutting forces, which is particularly useful for interrupted cuts, heavy engagement or tougher workpiece conditions. Which chipbreaker should be chosen for general-purpose milling? The L55T chipbreaker integrated with this insert is tuned for effective chip control in steel and cast iron, reducing the risk of long, stringy chips and improving machining safety. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the named brands. The offered article is an original factory-new product of Walter Tools.
LNHU090404R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coated carbide grade and the robust 0° negative rake geometry with a 0.4 mm corner radius to secure stable chip control and extended tool life in steel and cast iron milling; order directly via Metav Werkzeuge or contact the consultants for tailored advice. LNHU090404R-L55T WKP35G — milling indexable insert, Tiger‑tec Gold grade for steel and cast iron | Walter Tools The LNHU090404R-L55T WKP35G is a rectangular, negative‑rake milling insert engineered for productive machining of steel (P) and cast iron (K) applications Tiger‑tec Gold coated carbide grade WKP35G Negative rake 0° for robust cutting Rectangular geometry with 0.4 mm corner radius Chipbreaker L55T for stable chip control Reliable cutting performance for steel and cast iron The combination of the WKP35G grade and Tiger‑tec Gold technology delivers a consistently wear‑resistant cutting edge optimised for the demands of ISO groups P (steel) and K (cast iron). The coated carbide construction improves thermal and abrasive resistance, reducing flank wear and preserving cutting geometry under cyclic loads. In practical terms, this means fewer indexings, predictable tool life and improved process economy when machining unalloyed and alloyed steels or abrasive cast materials. Geometry designed for strength and predictable results A negative rake 0° geometry increases edge robustness and reduces the risk of chipping in interrupted cuts; the corner radius 0.4 mm enhances edge stability while maintaining acceptable surface finish. The rectangular shape paired with the chipbreaker L55T controls chip formation and evacuation, which lowers machining interruptions and assists in achieving repeatable component tolerances. These features make the insert suitable for heavier engagement depths and operations where tool reliability is critical. Practical advantages on the shop floor The indexable insert fits established cutter bodies and supports rapid index changes for minimal downtime. The Tiger‑tec Gold coating and grade selection translate into improved process security and consistent surface quality, reducing rework and enhancing productivity. For application guidance or cutting data specific to a workpiece and machine setup, Metav Werkzeuge provides technical support and supplementary documentation to align insert choice with production targets. For tailored advice on integrating Walter Tools’ Tiger‑tec Gold inserts into production workflows, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for rapid, application‑oriented support Technical data SKU: LNHU090404R-L55T-WKP35G-WALTER Product: Milling indexable insert LNHU090404R-L55T WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Core data Corner radius: 0.4 mm Free rake angle: 0° (negative) Plate size: 09 Thickness: 04 Tolerance class: H Materials & features Geometry: rectangular Chipbreaker: L55T Applicable materials: steel (P), cast iron (K) Coated carbide grade Execution: U FAQ What materials is this insert designed for? The LNHU090404R-L55T WKP35G milling indexable insert from Walter Tools is specified for steel (ISO P) and cast iron (ISO K) applications, matching the wear and chip characteristics of these groups. How does the insert geometry affect machining stability? The negative 0° rake and 0.4 mm corner radius provide a robust cutting edge that resists chipping during interrupted cuts; combined with the L55T chipbreaker, this geometry supports stable chip control and consistent surface results. Which series and grade does the insert use and what are the benefits? This insert belongs to the Tiger‑tec Gold series and uses the WKP35G coated carbide grade, offering improved abrasion resistance and thermal stability for longer tool life and dependable performance. Can Metav Werkzeuge provide cutting data for this insert? Yes, Metav Werkzeuge offers application‑specific advice and cutting recommendations to match the insert to machine, workpiece and process requirements. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no connection between our company and the named brands. The offered article is original, factory‑new merchandise of the manufacturer.
LNHU090404R-L55T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of a durable Tiger‑tec Gold coating and a geometry optimised for steel to keep cycle times stable and tool changes to a minimum; order directly via Metav Werkzeuge or consult the specialists for cutting‑data support. LNHU090404R-L55T WPP35G milling indexable insert – Tiger‑tec Gold for steel (Walter Tools) The LNHU090404R-L55T WPP35G is a rectangular milling insert engineered for efficient machining of steel, combining a Tiger‑tec Gold coated carbide grade with an L55T chipbreaker for controlled chip formation. Tiger‑tec Gold coated carbide grade WPP35G Optimised chip control with L55T chipbreaker 0° negative clearance for stable cutting Rectangular insert with 0.4 mm corner radius Consistent performance with a steel‑focused grade The WPP35G grade, belonging to the Tiger‑tec Gold series, is a coated carbide designed specifically for machining steels (ISO P). As a result, the insert offers balanced toughness and wear resistance across common steel applications, supporting reproducible tool life and stable cutting forces. The grade composition and coating technology aim to reduce flank wear and maintain a reliable cutting edge under the heat and strain typical of steel machining, which translates directly into fewer unplanned tool changes and more predictable production throughput. Geometry and edge design for reliable surface finish A rectangular form with a 0.4 mm corner radius and 0° negative clearance delivers dimensional stability and robust edge support during intermittent or heavy engagement cuts. The integrated L55T chipbreaker promotes consistent chip control, reducing the risk of built‑up edge and aiding coolant access at the cutting zone. Together, these features help to improve surface quality and allow higher material removal rates while keeping vibration low. The insert thickness and size codes indicate a platform suited for stable clamping and repeatable indexability in standard milling toolholders. Practical process benefits and integration into workflows In workshop practice, this insert is particularly suitable for operations where steel is the primary material group: roughing passes with consistent chip evacuation and finishing passes where edge stability matters. Using a grade tailored to steel machining supports higher productivity by combining wear resistance and sufficient toughness for mixed cutting conditions. For process optimisation, pairing the insert with appropriate speeds, feeds and coolant strategies will preserve the Tiger‑tec Gold coating performance and extend service intervals, contributing to lower overall manufacturing costs and higher uptime. For selection of holder systems and cutting parameters, Metav Werkzeuge can provide application‑specific guidance. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools inserts into production processes and for rapid availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: LNHU090404R-L55T-WPP35G-WALTER Name: Fräswendeschneidplatte LNHU090404R-L55T WPP35G Walter Tools Series: Tiger-tec Gold Grade: WPP35G Shape: Rectangular Core specifications Corner radius: 0.4 mm Clearance angle: 0° (negative) Size code: 09 Thickness code: 04 Design / Special features Chipbreaker: L55T Coating: Tiger‑tec Gold Material suitability: Steel (ISO P) Execution: U Tolerance class: H ISO designation: LNHU090404R-L55T WPP35G Base designation: LNHU090404R-L55T FAQ What materials is this insert intended for? The insert is designed for machining steel (ISO group P); the WPP35G grade and Tiger‑tec Gold coating optimise performance for unalloyed and alloyed steels. What does the WPP35G grade offer compared with other grades? WPP35G is a Walter Tools coated carbide grade within the Tiger‑tec Gold family that balances wear resistance and toughness for steel machining, providing good edge life under typical steel cutting conditions. How does the L55T chipbreaker affect machining? The L55T chipbreaker promotes reliable chip formation and evacuation, which helps maintain a stable cutting process and improves surface finish when using the LNHU090404R-L55T WPP35G insert. What does the 0° negative clearance mean in practice? A 0° negative clearance provides a robust cutting edge and reduced risk of chipping during heavy engagement cuts, aiding stability and repeatability in milling operations. Is this insert suitable for finishing and roughing operations? Yes; the combination of the 0.4 mm corner radius, robust grade and the chipbreaker makes the insert suitable for both productive roughing and controlled finishing passes in steel. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) with headquarters in Tübingen is one of the world's leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and brand names are the property of their respective owners and are mentioned here for clarification only. There is no affiliation between our company and these manufacturers; the offered article is an original, factory‑new product of the manufacturer.
LNHU090404R-L55T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Gold coated grade WSM35G, a secure chip control geometry and a 0° negative rake for reliable machining of stainless steels and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult our technical advisors for precise application support. LNHU090404R-L55T WSM35G Rectangular milling insert, Tiger‑tec Gold by Walter Tools A LNHU090404R-L55T WSM35G milling insert engineered for heavy‑duty machining of stainless steels and heat‑resistant superalloys, featuring a chipbreaker L55T and a compact 0.4 mm corner radius. Tiger‑tec Gold coating for high heat resistance Suitable for stainless steels and superalloys Rectangular form with 0.4 mm corner radius 0° negative rake for secure cutting Consistent performance on demanding materials The Tiger‑tec Gold WSM35G grade combines a coated carbide substrate with a geometry tuned for stable cutting in demanding conditions. This results in improved edge life when machining tough, work‑hardening materials such as stainless steels and nickel‑based alloys. The insert’s negative 0° rake reduces the tendency for built‑up edge and supports repeatable chip formation, which translates into fewer interruptions and higher process reliability on production runs. Better chip control and surface integrity The integrated chipbreaker L55T and the rectangular insert form work together to guide and break chips efficiently, reducing rework and machine downtime. A 0.4 mm corner radius balances edge strength with accessible cutting detail, helping to maintain component surface quality while extending the usable life of the cutting edge. These design choices support a predictable machining window and make tool change intervals easier to plan. Application scope and mounting considerations Designed for slotting and shoulder milling operations, the insert fits standard rectangular cutter bodies specified for this ISO designation. The 04 thickness and 09 plate size provide compact support in holders while the H tolerance class ensures consistent seating and repeatable positioning. When paired with a suitable cutter body, the grade performs well under interrupted cuts and in scenarios where thermal stability is critical. Process benefits and economic rationale Using a Tiger‑tec Gold WSM35G insert reduces unplanned stoppages through improved wear resistance and predictable flank performance. This leads to higher overall equipment effectiveness and a favourable cost‑per‑component ratio for medium to long production series. The insert’s composition and geometry support higher cutting parameters than uncoated grades in the same class, enabling operators to achieve productive cycle times without sacrificing safety margins. Secure process stability with Walter Tools' Tiger‑tec Gold grade — contact Metav Werkzeuge for application advice or to purchase the LNHU090404R-L55T WSM35G insert directly through Metav Werkzeuge Technical data Article number: LNHU090404R-L55T-WSM35G-WALTER Designation: LNHU090404R-L55T ISO designation: LNHU090404R-L55T WSM35G Type: Milling insert Facts Corner radius: 0.4 mm Free angle: 0° Plate size: 09 Plate thickness: 04 Tolerance class: H Special features Coating: Tiger‑tec Gold Grade: WSM35G Chipbreaker: L55T Plate form: Rectangular Execution: U Series: Tiger‑tec Gold Material application: stainless steels (M), heat‑resistant superalloys and titanium (S) FAQ What materials are recommended for this insert? The LNHU090404R-L55T WSM35G insert is recommended for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), utilising the Tiger‑tec Gold coating to resist heat and preserve edge integrity. Which chipbreaker is integrated and what is its benefit? This insert features the L55T chipbreaker, which promotes controlled chip fragmentation and evacuation, reducing the risk of entanglement and improving surface quality during milling. How does the 0° negative rake affect cutting? A 0° negative rake increases cutting edge robustness and reduces the formation of built‑up edge when machining sticky or work‑hardening materials, offering more consistent tool life under heavy engagement. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer.
LNHU090404R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Taking advantage of the durable Tiger·tec Gold coating and the robust rectangular geometry with a 0.4 mm corner radius delivers consistent tool life and stable chip control in demanding milling operations; order the LNHU090404R-L55T WSP45G directly via Metav Werkzeuge or consult the technical team for process optimisation. LNHU090404R-L55T WSP45G rectangular milling insert by Walter Tools — Tiger·tec Gold PVD, chipbreaker L55T LNHU090404R-L55G WSP45G is a PVD-coated, rectangular milling insert designed for productive milling of steel, stainless steel and heat-resistant alloys Tiger·tec Gold coating for extended life Suitable for steel, stainless and superalloys Negative 0° relief for stable cutting Rectangular shape with 0.4 mm corner radius Reliable wear resistance for productive milling The combination of the Tiger·tec Gold coating and the WSP45G grade produces a PVD-coated carbide body that is optimised for the thermal and mechanical loads typical of milling steel, stainless steel and superalloys. The coating reduces flank wear and enhances resistance to built-up edge, which translates into longer tool life and fewer indexings. For production environments this means more predictable tool-change intervals and improved part-to-part consistency. The technical advantage of a coated grade is that it supports secure chip formation under variable cutting conditions and contributes directly to lower unit costs in series machining. Geometry engineered for cutting stability and edge strength The rectangular plate form with a negative 0° relief provides a mechanically strong cutting edge that tolerates interruptions and heavy engagement without premature chipping. The 0.4 mm corner radius increases edge strength for robust profile milling and shoulder operations, while the L55T chipbreaker supports controlled chip flow, reducing the risk of clogging in slotting or higher-feed passes. Negative relief geometry also improves vibration damping and makes the insert suitable for higher-depth cuts where stability is critical. These design choices ensure a balance between reliable edge life and the capacity for demanding material removal. Process reliability, suitability and application guidance Classified in tolerance H and delivered within the Tiger·tec Gold series, this insert is intended for versatile milling duties across ISO groups P, M and S (steel, stainless steel and heat-resistant alloys). The WSP45G grade favours secure chip control and stable cutting edges during continuous and interrupted cuts. In practice, the insert benefits job shops and production lines requiring repeatable surface quality and machining economy; lower downtime and predictable wear behaviour enhance overall productivity. For specifics on cutting data and adaptation to a given machine or workpiece material, the Metav Werkzeuge technical team can provide application-oriented guidance and cutting-parameter recommendations. For high-performance milling with Tiger·tec Gold reliability, contact Metav Werkzeuge for tailored advice and ordering support. Technical Data Article number: LNHU090404R-L55T-WSP45G-WALTER SKU: LNHU090404R-L55T-WSP45G-WALTER Designation: LNHU090404R-L55T WSP45G Type: Fräswendeschneidplatte (milling insert) Facts Plate size: 09 Plate thickness: 04 Corner radius: 0.4 mm Relief angle: 0° (negative) Tolerance class: H Special features Coating: Tiger·tec Gold Grade/sort: WSP45G Chipbreaker: L55T Material suitability: P / M / S (steel, stainless steel, heat‑resistant alloys) Shape: rectangular Series: Tiger·tec Gold Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The LNHU090404R-L55T WSP45G insert is specified for ISO groups P, M and S, making it suitable for steel, stainless steel and heat‑resistant superalloys in milling applications. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold PVD coating on the WSP45G grade reduces flank wear and supports stable chip formation, which extends insert life and improves process stability in series milling. Why choose a negative 0° relief insert for milling? A negative 0° relief increases edge robustness and resistance to chipping during interrupted cuts; this geometry supports higher engagement and improved vibration damping for consistent surface quality. What role does the L55T chipbreaker play? The L55T chipbreaker promotes controlled chip breaking and evacuation, lowering the risk of chip congestion in slotting and improving heat management at the cutting zone. Is this insert appropriate for heavy-duty shoulder milling? Yes; the rectangular form combined with a 0.4 mm corner radius and the WSP45G grade provides the edge strength required for heavier passes and shoulder milling with enhanced reliability. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand: Walter Tools) with headquarters in Tübingen is a global supplier of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. There is no affiliation between our company and the mentioned manufacturers; the offered item is original and factory‑new.
LNHU090404R-L65T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated grade that combines high edge stability and consistent chip control for productive milling across a wide material range; the insert’s negative 0° geometry and L65T chipbreaker support secure machining and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. Fräswendeschneidplatte LNHU090404R-L65T WSP45G — Tiger·tec Gold coated, L65T chipbreaker, Walter Tools The Fräswendeschneidplatte LNHU090404R-L65G WSP45G is a coated carbide milling insert designed for versatile face and shoulder milling of Stahl, rostfreier Stahl and heat-resistant alloys in industrial production Tiger·tec Gold PVD coating for wear resistance L65T chipbreaker for predictable chips 0° (negativ) rake for stable cutting forces Rectangle form with 0.4 corner radius Optimised coating for longer, more predictable tool life The combination of the Tiger·tec Gold series and the WSP45G grade delivers a PVD-coated carbide chemistry that is tuned for machining operations with high thermal loading. This coating technology reduces flank wear and enhances resistance to abrasive and adhesive wear mechanisms, which translates into fewer tool changes and longer productive cycles. By choosing a coated grade that balances toughness and hardness, shops benefit from improved process stability and reduced scrap rates when machining mixed batches. Geometry engineered for consistent chip control and secure edges The insert’s L65T chipbreaker together with a 0° (negativ) rake angle creates robust cutting edges that resist chipping under interrupted cuts and heavy engagement. The 0.4 corner radius increases edge strength without sacrificing the ability to produce defined features, supporting repeatable surface quality. These geometric choices enable reliable chip formation and evacuation, reducing the risk of built-up edge and facilitating stable feeds even under variable cutting conditions. Broad material capability for versatile shop-floor use Specified for material groups P / M / S, the grade is suitable for machining Stahl, rostfreier Stahl and demanding high-temperature alloys including Titan and superalloys. The formulation of the grade supports secure chip formation in tough, heat-prone materials and maintains edge integrity where thermal and mechanical loads are high. For operations that require flexibility across component families, this insert reduces tool inventory complexity while maintaining consistent performance. Practical integration and tolerance assurance for production With a rectangle format and standard designation, the insert fits straightforwardly into common milling toolholders and is manufactured to toleranzklasse H, ensuring dimensional reliability for indexed cutting. The negative rake and chipbreaker combination prioritises process security in roughing and medium-finishing operations. For optimal results, match the insert to stable clamping fixtures and toolpaths designed to exploit the chipbreaker; Metav Werkzeuge can advise on holder compatibility and parameter windows for specific CNC platforms. For milling tasks demanding process reliability and extended edge life, discuss Tiger·tec Gold solutions with Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations. Technical Data Article number: LNHU090404R-L65T-WSP45G-WALTER SKU: LNHU090404R-L65T-WSP45G-WALTER Designation: LNHU090404R-L65T WSP45G Series: Tiger-tec Gold Grade/sort: WSP45G Manufacturer: Walter Tools Facts Plate shape: Rechteck Plate size: 09 Plate thickness: 04 Corner radius: 0.4 mm Rake angle: 0° (negativ) Chipbreaker: L65T Tolerance class: H Special features Coating: Tiger·tec Gold (PVD-coated) Substrate: coated carbide Material suitability: Stahl, rostfreier Stahl, Titan / Superalloys Application focus: milling, versatile face and shoulder operations Edge condition: robust negative-rake geometry for interrupted cuts FAQ What materials is this insert best suited for? The Fräswendeschneidplatte LNHU090404R-L65T WSP45G is designed for machining Stahl, rostfreier Stahl and heat-resistant alloys such as Titan and other superalloys, as indicated by its P/M/S classification. How does the L65T chipbreaker affect machining? The L65T chipbreaker on the insert helps produce predictable chips and improves evacuation, which supports stable cutting conditions and reduces the likelihood of built-up edge during milling. Is the coating suitable for high-temperature cutting? Yes, the Tiger·tec Gold PVD coating of the WSP45G grade is formulated to withstand elevated temperatures and abrasive wear, contributing to consistent edge life in thermally demanding operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names mentioned are the property of their respective owners. Brand names and protected designations are used for clarification and identification only; there is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
LNHU090404R-L85T WK10 Wendeplatten - Walter Tools
Take advantage of the combination of robust edge strength, precise chip control and a compact rectangular format for consistent machining results. The uncoated WK10 grade together with a L85T chipbreaker supports stable cutting and predictable tool life — order the insert directly via Metav Werkzeuge or consult our application specialists for compatibility advice. LNHU090404R-L85T WK10 – milling indexable insert (rectangular 09, 0.4 mm radius) by Walter Tools The LNHU090404R-L85T WK10 is a rectangular milling insert designed for secure, repeatable milling operations where reliable chip control and edge stability are required. Uncoated carbide grade WK10 Negative 0° free angle for secure cutting Rectangular 09 format, 0.4 mm corner radius L85T chipbreaker for controlled chips Predictable performance through robust geometry and grade The insert combines the WK10 uncoated carbide grade with a negative 0° free angle, a geometry that prioritises edge strength over aggressive cutting. This makes the component particularly well suited to interrupted cuts or applications where edge robustness limits microchipping and reduces unexpected tool changes. The uncoated carbide composition offers a straightforward cutting behaviour; customers are advised to verify suitability against the manufacturer’s product matrix for specific workpiece materials and cutting parameters. Consistent chip formation for easier process control The integrated L85T chipbreaker is designed to produce short, well formed chips that evacuate reliably from the cutting zone. Controlled chip formation lowers the risk of built-up edge and clamp interference, which in turn helps to maintain a constant surface finish and reduces downtime for chip clearing. Where coolant and chip evacuation are restricted, this chipbreaker geometry supports safer operation and easier downstream handling of swarf. Compact format that balances strength and accessibility Presented in a rectangular 09 format with a 0.4 mm corner radius, the insert provides a firm corner for stable engagement while remaining accessible for fine finishing passes. The thickness code 04 and the tolerance class H reflect the manufacturing precision and fit expected from this series; these details help ensure repeatable seating in compatible toolholders and predictable runout behaviour on the cutter body. Seamless workshop integration and brand assurance The insert is part of Walter Tools’ open series of cutting grades and is intended for straightforward integration into standard milling tool systems that accept the corresponding ISO designation. Walter Tools is known for process-orientated solutions and reliable tool performance, making this component a practical option for production and jobshop environments where consistent results matter. For supply, compatibility checks or application recommendations, Metav Werkzeuge can provide technical advice and stock information. For guaranteed genuine Walter Tools inserts and tailored application guidance, contact Metav Werkzeuge for availability and recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LNHU090404R-L85T-WK10-WALTER ISO designation: LNHU090404R-L85T WK10 Manufacturer: Walter Tools Type: milling indexable insert Facts Corner radius: 0.4 mm Free angle: 0° (negative) Format code: 09 Thickness code: 04 Tolerance class: H Special features Chipbreaker: L85T Grade: uncoated carbide (WK10) Shape: rectangular Series: Walter Schneidstoffsorte - Serie offen Execution: U FAQ What materials is this insert suitable for? The WK10 grade is an uncoated carbide; material suitability should be checked against Walter Tools’ product matrix and the LNHU090404R-L85T WK10 technical data to confirm suitability for specific steels or alloys. How does a negative 0° free angle affect machining? A negative 0° free angle increases edge strength and stability; the LNHU090404R-L85T WK10 geometry therefore favours interrupted cuts and applications where a robust cutting edge is required. What benefit does the L85T chipbreaker provide? The L85T chipbreaker promotes short, controlled chips and reliable evacuation, reducing the risk of built-up edge and improving surface consistency when using the insert. Which toolholders accept this insert? The insert uses a standard ISO-style designation (LNHU090404R-L85T); compatibility depends on the cutter body or holder that accepts rectangular 09 inserts — check the holder specifications and the insert’s ISO code. What does tolerance class H indicate? Tolerance class H denotes the manufacturing tolerance for the insert, which affects fit and repeatability in the toolholder and contributes to predictable machining performance. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no connection between our company and the brands named. The offered item is an original, factory-new product of the manufacturer.
LNHU090404R-L85T WXN15 Wendeplatten - Walter Tools
Take advantage of a sharp, uncoated carbide grade combined with a dedicated chipbreaker for clean machining of non‑ferrous metals; the result is reduced built‑up edge and reliable cycle times. Order the insert directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. LNHU090404R-L85T WXN15 milling insert — Walter Tools — for non‑ferrous metals, 0° negative rake The LNHU090404R-L85T WXN15 is a rectangular milling insert designed for sharp, uncoated performance when machining non‑ferrous materials such as aluminium and brass. Uncoated solid carbide grade WXN15 Dedicated L85T chipbreaker for NE‑metals Rectangular geometry with 0.4 mm radius Negative rake 0° for stable cutting Consistent chip control for non‑ferrous machining The combination of a sharp uncoated carbide grade and the L85T chipbreaker delivers predictable chip formation when working with aluminium, copper or brass. This results in fewer built‑up edge occurrences and a cleaner surface finish, which reduces secondary operations. The geometry and cutting edge preparation are optimised for reaming off thin materials without smeared chips; as a consequence, production processes run with fewer interruptions and tool life becomes more reproducible. Designed for secure, repeatable results and easy tool management Built as part of the Walter N‑Sortensystem, this insert provides a well‑defined seating and tolerance class H, supporting repeatable clamping and indexing. The negative rake of 0° enhances edge strength for interrupted cuts and keeps deflection low in light‑to‑medium milling tasks. Together with the compact rectangular form and a 0.4 mm corner radius, the geometry balances edge robustness with the fine finishing capability needed in many non‑ferrous applications. Productivity gains through simplified tool choice and integration Using an uncoated, sharp‑edge grade reduces the need for complex coatings when machining NE‑metals, lowering the risk of built‑up edge and minimising thermal adhesion. The insert’s clear designation and compatibility with standard holders make tool changeover straightforward; fewer variations in tooling mean quicker setup times and reduced inventory complexity. For workshops seeking reliable productivity in non‑ferrous milling, this plate supports efficient throughput while maintaining surface quality. Discuss specific application requirements with Metav Werkzeuge to determine how the Walter Tools LNHU090404R-L85T WXN15 milling insert can be integrated into production workflows and tooling systems Technical Data Article number: LNHU090404R-L85T-WXN15-WALTER Product: Milling insert Brand: Walter Tools Series: Walter N‑Sortensystem Grade: WXN15 Shape: Rectangular Facts Size: 09 Thickness: 04 Corner radius: 0.4 mm Free rake: 0° (negative) Tolerance class: H Special features Uncoated solid carbide grade Chipbreaker: L85T Application: Non‑ferrous metals (N) Sharp edge geometry for reduced material adhesion FAQ Which materials is this insert suitable for? The LNHU090404R-L85T WXN15 is optimised for non‑ferrous metals such as aluminium, copper and brass and is specified for group N materials. What does the WXN15 grade indicate? WXN15 denotes an uncoated Walter carbide grade developed for sharp cutting in NE‑metals; it prioritises low adhesion and consistent edge retention. How does the 0° negative rake affect machining? A 0° negative rake increases edge strength and stability during milling; with the L85T chipbreaker it supports controlled chips and reduces the risk of edge chipping. Is the insert compatible with standard rectangular tool holders? Yes, the rectangular form and tolerance class H ensure reliable seating in compatible holders designed for the Walter N‑Sortensystem. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU090408R-L55T WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a grade optimised for cast iron, and precise chip control for reliable milling cycles; order directly via Metav Werkzeuge or consult the team for application support. LNHU090408R-L55G – Milling insert, Tiger·tec Gold, for cast iron (Walter Tools) The LNHU090408R-L55T WKK25G is a rectangular milling insert designed for robust and consistent machining of cast iron components in production and repair environments. Tiger·tec Gold coated for high wear resistance Optimised grade WKK25G for cast iron machining Rectangular 09 format with 0.8 mm corner radius L55T chipbreaker for reliable chip control Greater uptime through advanced coating and grade selection The combination of the Tiger·tec Gold coating and the WKK25G grade delivers a measurable improvement in tool life when working with abrasive cast iron. The coated cemented carbide substrate is tailored to resist the micro‑abrasive wear typical of grey and nodular cast irons, so the insert sustains cutting performance for longer intervals. In practice, this means fewer indexings and tool changes, which directly supports higher machine uptime and lower process costs while preserving component tolerances. Stable machining and predictable chip formation A 0° negative rake and the L55T chipbreaker create a cutting geometry that promotes short, controlled chips and reduces the risk of built‑up edge during interrupted cuts. The negative rake increases edge strength, making the insert well suited to shock‑loaded or interrupted milling common in automotive and heavy engineering castings. Reliable chip control reduces rework and scrap, improving overall process reliability in repetitive production runs. Robust edge and surface quality from the rectangular format The rectangular 09 format with a 0.8 mm corner radius balances edge strength and surface finish: the radius supports a stable cutting edge under heavy feed rates, while the geometry maintains an acceptable surface quality without excessive cutting forces. For operations that require a compromise between tool life and part finish, this insert provides a practical middle ground, allowing productive material removal rates without sacrificing geometry consistency. Practical application guidance and process support This insert is specified for machining cast iron in accordance with its grade designation and material group compatibility. When integrating the insert into a machining process, select holders that accept rectangular inserts of the 09 format and tune feeds and speeds for the abrasive nature of cast irons. If additional data or cutting parameter recommendations are needed, Metav Werkzeuge can provide tailored advice to match the insert’s capabilities to the machine and job requirements. Contact details for technical queries are available for straightforward consultation. For cast iron milling applications that demand wear resistance and predictable chip control, rely on Walter Tools’ Tiger·tec Gold WKK25G inserts — contact Metav Werkzeuge for ordering and technical application support: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: LNHU090408R-L55T-WKK25G-WALTER Label: Fräswendeschneidplatte LNHU090408R-L55T WKK25G Walter Tools Product type: Milling insert Facts Size format: 09 Thickness: 04 Corner radius: 0.8 mm Free cutting angle: 0° (negative) Tolerance class: H Special features Grade: WKK25G (coated carbide) Coating technology: Tiger·tec Gold Chipbreaker: L55T Insert shape: Rectangular Suitable for: Cast iron Series: Tiger‑tec Gold FAQ What materials is this insert suitable for? The insert is designed for machining cast iron, as indicated by the WKK25G grade and the substrate/coating combination. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating enhances wear resistance and protects the carbide substrate against abrasive particles common in cast iron, which extends tool life and improves process stability. What is the advantage of the L55T chipbreaker? The L55T chipbreaker produces short, controlled chips that reduce folding and entanglement, improving safety and surface quality during interrupted and continuous milling. Is the corner radius suitable for heavy roughing? The 0.8 mm corner radius provides a robust cutting edge that tolerates higher feed rates and shock loads, making it appropriate for many roughing applications in cast iron. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
LNHU090408R-L55T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life from the Tiger‑tec Silver coating, the material versatility of the WKP25S grade and the geometry‑driven chip control for stable, productive machining; order the insert directly via Metav Werkzeuge or consult our technical team for process optimisation. LNHU090408R-L55T WKP25S milling insert for steel and cast iron by Walter Tools — Tiger‑tec Silver, 0° negative rake A LNHU090408R-L55T WKP25S milling insert engineered for productive machining of steel and cast iron, designed to deliver stable cutting and consistent results in industrial milling applications Milling insert LNHU090408R-L55T WKP25S, Walter Tools Tiger‑tec Silver coating for extended tool life Suitable for steel (P) and cast iron (K) 0° negative rake; 0.8 mm corner radius Rectangular shape with L55T chipbreaker Higher process reliability for steel and cast‑iron work The combination of the Tiger‑tec Silver technology and the WKP25S grade offers a reliable basis for machining steel and cast iron according to ISO 513 classifications. The coated carbide substrate is optimised for the thermal and mechanical demands typical of these materials, which results in steadier cutting behaviour and predictable tool wear. The execution code U and the stated tolerance class H contribute to consistent seating and repeatable mounting in suitable cutter bodies, supporting uninterrupted production cycles and fewer tool changes. Geometry that improves chip formation and surface outcomes The rectangular plate format and the dedicated L55T chipbreaker work together to control chip shape and evacuation in interrupted and continuous cuts. A 0° negative rake decreases cutting edge exposure under high feed and heavy engagement, while the 0.8 mm corner radius balances edge strength with achievable surface finish. These geometric choices reduce the risk of edge chipping in demanding operations and help to maintain dimensional stability on machined components—advantages that are particularly relevant in medium‑ to high‑volume milling tasks. Economical machining through wear resistance and consistency The coating and grade combination is aimed at reducing overall tooling costs by extending the effective lifetime per indexable edge. With fewer unexpected replacements and stable cutting data, cycle times remain predictable and machine uptime improves. The insert’s design supports consistent surface quality on successive parts, which lowers rework rates and feeds directly into a better cost‑benefit ratio for production runs. This makes the component suitable where process economy and repeatability are priorities. Shop‑floor integration and practical application notes The insert code and dimensions (LNHU090408R‑L55T WKP25S) align with common Walter Tools pocket types and standard cutter bodies; match the plate thickness and seat geometry as specified by the toolholder manufacturer. The plate’s strengths lie in general steel and cast‑iron applications, where the coated grade stabilises edge life under varying cutting conditions. For specific machining strategies or to confirm cutter compatibility with a given toolbody, the operator may consult Metav Werkzeuge for tailored recommendations and process parameters. Contact Metav Werkzeuge today to discuss how the Walter Tools LNHU090408R-L55T WKP25S insert can be integrated into existing milling systems and to request cutting data tailored to the intended application Technical Data Article number: LNHU090408R-L55T-WKP25S-WALTER Item designation: LNHU090408R-L55T WKP25S Manufacturer: Walter Tools Product type: Milling insert (indexable insert) Facts Corner radius: 0.8 mm Rake: 0° (negative) Plate size: 09 Thickness code: 04 Tolerance class: H Special features Tiger‑tec Silver coated carbide grade WKP25S Suitable for steel (P) and cast iron (K) Chipbreaker: L55T Rectangular plate form Execution: U Series: Tiger‑tec Silver FAQ Which materials is this insert designed for? The LNHU090408R‑L55T WKP25S insert is intended for machining steel (P) and cast iron (K) as defined in the product series and grade information. What are the key geometry features to note? The plate offers a 0° negative rake, a 0.8 mm corner radius and a rectangular form with an L55T chipbreaker, features that support robust cutting and controlled chip formation. How does the Tiger‑tec Silver coating help production? The Tiger‑tec Silver coating improves wear resistance and thermal stability of the cutting edge, which extends effective edge life and supports more consistent part quality over longer runs. Is this insert compatible with standard Walter toolholders? The designation aligns with common Walter Tools cutter pockets; compatibility depends on the specific cutter body—match the plate code and seat geometry when assembling. What does the tolerance class H signify? Tolerance class H indicates the manufacturing tolerance of the plate; it ensures predictable seating and repeatable positioning when installed in the correct toolholder. Are there recommended application types for this insert? The insert is suited for general milling tasks in steel and cast‑iron components, especially where a balance between edge strength and surface finish is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for clarification only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
LNHU090408R-L55T WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WKP35G grade and a 0° negative relief for consistent performance in steel and cast iron machining. Order the milling insert directly via Metav Werkzeuge or consult our technical team for further application advice. LNHU090408R-L55T WKP35G – Milling indexable insert, Tiger·tec Gold coating (for steel & cast iron) by Walter Tools The LNHU090408R-L55T WKP35G is a negative‑relief rectangular milling insert designed for high‑productivity face and slot milling in steel and cast iron. Tiger·tec Gold coating for high wear resistance WKP35G grade optimised for steel and cast iron 0° negative relief for secure edge engagement 0.8 mm corner radius for robust cutting edge Increased process reliability from advanced coating technology The Tiger·tec Gold coating and the WKP35G cemented‑carbide grade are engineered to extend tool life under continuous machining of unalloyed and alloyed steel and abrasive cast iron. The coating reduces flank wear and thermal softening at the cutting edge, which translates into fewer indexings and longer effective cutting times. For operations where consistent surface quality and predictable tool change intervals matter, this combination contributes directly to higher net productivity and lower process variance. Secure cutting engagement and predictable chip control A 0° negative relief geometry improves edge stability during interrupted cuts and heavy depth‑of‑cut entries. The rectangular plate form, paired with the chipbreaker L55T, promotes controlled fragmentation of swarf in both long‑ and short‑chip conditions typical for P and K material groups. The result is reduced risk of built‑up edge and improved evacuation of chips from pocketed or through‑slot operations, which supports reliable cycle times and fewer machine interruptions. Robust edge design for repeatable performance The 0.8 mm corner radius and the insert’s construction prioritise edge strength, making the plate suitable for heavier engagement and general milling tasks where edge chipping must be avoided. This geometry gives a balance between strength and achievable surface finish: a larger radius increases edge resilience, while the coating maintains wear resistance. For shops standardising on versatile inserts, this option reduces the need for frequent grade changes across similar steel and cast‑iron components. Practical advantages for workshop integration The insert is supplied in a proven rectangular format and a standard thickness/size code that fits common milling bodies, allowing straightforward integration into existing tool holders. Its negative geometry is particularly beneficial for robust clamping systems and milling heads where secure seating is essential. The overall design aims to simplify inventory: one insert grade covers a broad material range and a variety of general‑purpose milling operations, lowering tooling complexity without sacrificing performance. Contact Metav Werkzeuge today to discuss application-specific recommendations for this Walter Tools Tiger·tec Gold insert and to arrange an order or technical consultation Technical data Article number: LNHU090408R-L55T-WKP35G-WALTER Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Gold Grade: WKP35G Core specifications Plate size code: 09 Plate thickness code: 04 Relief angle: 0° (negative) Corner radius: 0.8 Chipbreaker: L55T Special features Rectangular plate form Material suitability: steel (P) and cast iron (K) Tolerance class: H Execution/type: U Material designation: P / K FAQ What materials is this insert suitable for? This insert is designed for machining steel (P) and cast iron (K); the WKP35G grade is optimised for those material groups. How does the Tiger·tec Gold coating improve tool life? The Tiger·tec Gold coating reduces abrasive and thermal wear on the cutting edge, so the insert maintains cutting performance for longer under typical steel and cast‑iron conditions. Why choose a 0° negative relief geometry? A 0° negative relief increases edge stability and secure clamping, which is advantageous for interrupted cuts and heavy engagement common in milling operations. Is the corner radius suitable for finishing operations? The 0.8 mm corner radius prioritises edge strength; while it supports good surface quality in general milling, finer finishing may require a smaller radius depending on tolerances. Can the chipbreaker handle both long and short chips? The L55T chipbreaker is developed for controlled chip formation across varying cutting conditions, improving evacuation in both long‑chip and short‑chip scenarios. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer. The brand indicated in the product data is Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com