LNHU100508-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold PVD coating and the WSP45G grade for dependable chip control and extended edge life; the insert’s 0° negative rake and 0.8 mm corner radius deliver robust milling in steel, stainless steel and heat-resistant alloys. Order directly via Metav Werkzeuge or consult our specialists for cutting-data recommendations. LNHU100508-F57T WSP45G milling indexable insert – rectangle, 0° rake, Walter Tools The LNHU100508-F57T WSP45G is a rectangular milling indexable insert designed for versatile face and shoulder milling of steel, stainless steel and heat-resistant superalloys in industrial production. Tiger·tec Gold PVD-coated carbide grade WSP45G Suitable for steel, stainless steel and superalloys Negative rake 0° for robust cutting Rectangle 10 format with 0.8 mm corner radius High-performance grade for consistent chip control and edge life The Tiger·tec Gold WSP45G grade combines a PVD coating with a tough substrate to deliver stable chip formation and improved resistance against abrasive wear. This results in more predictable tool behaviour during interrupted cuts and high-temperature cutting typical for stainless steel and nickel‑base alloys. The result is fewer unplanned tool changes and a more productive machining cycle. For planners and process engineers, the coated carbide’s balance between toughness and wear resistance supports longer tool life while maintaining dimensional stability on critical faces and shoulders. Robust geometry that supports heavy and interrupted milling The insert’s 0° negative rake and rectangular form provide a conservative cutting geometry that favours mechanical strength at the cutting edge. Combined with a 0.8 mm corner radius, this geometry reduces the risk of edge chipping during interrupted cuts and when machining difficult alloys. The integrated F57T chipbreaker is tuned to promote manageable chip shapes across a range of feeds, which simplifies evacuation and reduces heat concentration at the tool tip. Production managers will appreciate the reliability this brings to mix-and-match machining operations where varying workpiece materials are processed on the same machine. Practical process benefits and application guidance Intended for face and slot milling, the insert is compatible with steel (P), stainless steel (M) and high‑temperature alloys (S) as defined by ISO 513, so a single grade can cover multiple workpieces in a cell. The insert’s tolerance class H and the U execution contribute to consistent seating and repeatable clamping, which supports process stability and quality assurance. Where higher cutting speeds and improved surface finish are required, the Tiger·tec Gold technology helps maintain a stable cutting edge under thermal load, enabling tighter control of surface roughness without sacrificing tool life. Contact Metav Werkzeuge for tailored cutting-data sheets, toolholder recommendations and rapid delivery for Walter Tools Tiger·tec Gold inserts Technical data Article number: LNHU100508-F57T-WSP45G-WALTER Designation: LNHU100508-F57T WSP45G Series: Tiger-tec Gold Manufacturer: Walter Tools Product type: Milling indexable insert Core dimensions Size: 10 Corner radius: 0.8 mm Rake angle: 0° Thickness: 05 Plate form: Rectangle Special features Grade: WSP45G (coated carbide) Chipbreaker: F57T Execution: U Tolerance class: H Applicable material groups: P / M / S FAQ What materials is this insert suitable for? The LNHU100508-F57T WSP45G from Walter Tools is specified for steel (P), stainless steel (M) and heat‑resistant superalloys/titanium (S) according to the ISO groupings listed for the grade. How does the 0° negative rake affect cutting performance? A 0° negative rake gives the insert mechanical robustness and reduced tendency to chipping under interrupted cuts; the LNHU100508-F57T WSP45G benefits from this geometry when facing tough or abrasive workpieces. What role does the F57T chipbreaker play? The F57T chipbreaker promotes controlled chip breakage and evacuation across a range of feed rates, improving surface quality and lowering the risk of built‑up edge when using the WSP45G grade. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are used solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
LNHU120608-B57T WKK25G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and a dedicated B57T chipbreaker ensures superior wear resistance and stable chip control for cast iron milling, improving uptime and process security. Order directly via Metav Werkzeuge or consult our specialists for application advice and compatible toolholders. LNHU120608-B57T WKK25G — Fräswendeschneidplatte for cast iron (Tiger·tec Gold) by Walter Tools A LNHU120608-B57T WKK25G indexable milling insert designed for productive machining of cast iron components in industrial milling applications Tiger·tec Gold coating for superior wear resistance Optimised B57T chipbreaker for stable chips Rectangular insert with 0.8 mm nose radius Designed specifically for cast iron machining Extended tool life through advanced coating technology The Tiger·tec Gold coating and coated carbide substrate combine to resist the abrasive wear typical of cast iron workpieces. This coating system forms a hard, heat-resistant barrier that slows flank and crater wear, which translates into longer tool life and fewer tool changes on the shop floor. For users not specialised in coating chemistries, think of the coating as a protective skin that allows the cutting edge to maintain geometry under the high thermal and abrasive loads of cast iron machining. Reliable chip control and consistent surface quality The integrated B57T chipbreaker is engineered to produce short, controlled chips when machining cast iron, reducing the risk of chip entanglement and improving process stability. Combined with the rectangular geometry and the 0° (negative) rake, this insert offers a stable cutting action that supports steady material removal and a predictable surface quality. Stable chip control also reduces machine stoppages and contributes to higher productive throughput in serial production. Geometry tuned for productive milling operations With a 0.8 mm nose radius and a robust rectangular form, this insert provides a reliable cutting edge for a range of milling tasks on cast iron. The negative rake angle enhances edge strength, making the geometry suitable for interrupted cuts and tougher cast structures. As a direct benefit, machining cycles can be run with confidence at higher engagement depths where a regular edge might chip, thereby increasing overall productivity without sacrificing component integrity. Clear application guidance and integration into existing processes The grade WKK25G is specified for ISO group K (cast iron) and is balanced between wear resistance and toughness to handle the typical breaking chips of these materials. The insert designation and format fit standard toolholder systems that accept the LNHU120608-B57T family, enabling straightforward integration. For process planning, expect reliable performance in abrasive cast iron when the tool is used with appropriate cutting data; Metav Werkzeuge can advise on cutter selection and recommended parameters for optimum results. Contact Metav Werkzeuge for tailored advice on Walter Tools inserts such as the LNHU120608-B57T WKK25G and for assistance selecting compatible toolholders and cutting data — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: LNHU120608-B57T-WKK25G-WALTER Product name: Fräswendeschneidplatte LNHU120608-B57T WKK25G Brand: Walter Tools Series: Tiger·tec Gold Numbers / Core technical data Nose radius: 0.8 mm Plate size: 12 mm Thickness code: 06 Free angle: 0° (negative) Tolerance class: H Material group: K (cast iron) Designs / Special features Coating: Tiger·tec Gold Grade: WKK25G Chipbreaker: B57T Shape: Rectangular Execution: U Application: Cast iron (ISO group K) Sort description: Coated carbide optimised for abrasive wear FAQ What materials is this insert designed for? This Fräswendeschneidplatte LNHU120608-B57T WKK25G from Walter Tools is designed primarily for machining cast iron (ISO group K). How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the LNHU120608-B57G grade improves wear resistance and heat tolerance, which extends tool life and supports consistent performance in abrasive cast iron applications. What chip behaviour can be expected with the B57T chipbreaker? The B57T chipbreaker promotes short, manageable chips on cast iron, aiding chip evacuation and reducing the likelihood of machine stoppages due to chip build-up. Is the insert suitable for interrupted cuts? Yes; the rectangular shape combined with a 0° (negative) rake and a 0.8 mm nose radius gives the insert a robust edge suitable for interrupted and heavy engagement cuts in cast iron. Can Metav Werkzeuge help with cutting data and holder selection? Metav Werkzeuge provides application support and can recommend cutting data and compatible toolholders for the LNHU120608-B57T WKK25G to achieve optimal process security. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU120608-B57T WKP35S Wendeplatten - Walter Tools
High performance and consistent wear resistance through the combination of the WKP35S grade and Tiger‑tec Silver coating; rectangular geometry with a 0.8 mm corner radius and 0° (negative) relief ensures stable cut engagement and controlled chip formation for steel and cast iron machining. Order the LNHU120608-B57T WKP35S directly via Metav Werkzeuge or ask our consultants for application advice. LNHU120608-B57T WKP35S — Walter Tools indexable milling insert, Tiger‑tec Silver coating for steel and cast iron The LNHU120608-B57T WKP35S indexable milling insert is designed for productive milling of steel and cast iron, combining a coated carbide grade with a rectangular geometry for stable cutting and reliable chip control. High-performance Tiger‑tec Silver coating WKP35S grade for steel and cast iron 0° negative relief for stable cutting Rectangular form with 0.8 mm corner radius Durable machining performance with coated carbide technology The combination of the Tiger‑tec Silver coating and the WKP35S grade delivers improved wear resistance and consistent performance under typical steel and cast iron cutting conditions. This coated carbide insert is optimised for the thermal and abrasive demands associated with group P (steel) and group K (cast iron) materials according to ISO 513. The result is longer tool life and fewer indexings, which contributes to predictable cycle times and reduced tool costs in production environments. The thermal stability of the coating supports higher cutting speeds while maintaining edge integrity. Geometry that stabilises the cut and improves process security A 0° (negative) free angle and rectangular shape provide robust support at the cutting edge, making the insert particularly suitable for operations requiring stable engagement, such as roughing and interrupted cuts. The 0.8 mm corner radius improves edge strength and distributes cutting forces over a larger area, reducing the likelihood of chipping. Together with the insert’s geometry, these features enable a steadier cutting action, which increases process security and reduces vibration on demanding surfaces. Chip control and consistent surface quality The integrated B57T chipbreaker is tuned for controlled chip formation when machining steel and cast iron, helping to avoid long, stringy chips and to maintain smooth evacuation. Controlled chip flow reduces surface rework and minimises tool interference in multi-pass operations. The insert’s configuration supports consistent surface finish between indexings, which is especially beneficial in batch production where reproducible results are required. Practical benefits for workshop and production use As a cartridge-style indexable solution, the insert simplifies tool management: fewer regrinds, easy replacement and compatibility with toolholders that accept the LNHU-style geometry. The coated grade helps reduce the frequency of tool changeovers and supports higher productivity. When paired with appropriate cutting data and coolant strategy, this insert contributes to efficient material removal rates and predictable tool life, supporting leaner production workflows. For reliable, high‑productivity milling with Walter Tools' Tiger‑tec Silver inserts, contact Metav Werkzeuge to place orders or request technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: LNHU120608-B57T-WKP35S-WALTER Designation: LNHU120608-B57T WKP35S Series: Tiger-tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts Free angle: 0° (negative) Corner radius: 0.8 mm Insert shape: Rectangle Plate size: 12 Thickness code: 06 Tolerance class: H Special features Coating: Tiger·tec Silver Material base: P / K (steel, cast iron) Chipbreaker: B57T Execution: U Series description: Coated carbide insert FAQ What materials is this insert suitable for? The LNHU120608-B57T WKP35S is designed primarily for ISO group P (steel) and group K (cast iron) applications, reflecting the WKP35S grade’s optimisation for those materials. What advantage does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the insert enhances wear resistance and thermal stability, supporting higher cutting speeds and longer tool life compared with uncoated grades. How does the 0° negative relief affect machining? A 0° (negative) relief offers robust edge support for heavy engagement and interrupted cuts, improving stability and reducing the risk of edge breakage during demanding milling operations. What role does the B57T chipbreaker play? The B57T chipbreaker promotes controlled chip formation for both steel and cast iron, assisting chip evacuation and helping to maintain consistent surface quality over multiple indexings. Is this insert compatible with standard LNHU toolholders? The insert follows the LNHU geometry and is intended for compatible rectangular milling cutter bodies; users should verify toolholder compatibility with the LNHU120608-B57T designation. Manufacturer: Walter Tools — The Walter AG (brand: Walter Tools), headquartered in Tübingen, is part of the Sandvik group. Protected trademarks and brand names are the property of their respective owners. Brand names are used for explanatory purposes only. There is no connection between our company and the named manufacturers. The offered item is original and brand-new.
LNHU120608-B57T WPP35G WPP35G Wendeplatten - Walter Tools
Reliable productivity in steel machining results from the combination of the Tiger·tec Gold WPP35G grade and the B57T chipbreaker: longer tool life, stable chip formation and predictable performance reduce downtime. Order the LNHU120608-B57T WPP35G directly via Metav Werkzeuge or ask our consultants for advice on optimal cutting parameters. LNHU120608-B57T WPP35G – rectangular milling insert, Tiger·tec Gold, Walter Tools The LNHU120608-B57T WPP35G is a rectangular indexable insert designed for efficient steel machining with Tiger·tec Gold coating for high wear resistance. Tiger·tec Gold coating WPP35G for steel machining Rectangular insert with 0° negative rake Corner radius 0.8 mm for robust edge strength Chipbreaker B57T for controlled chip formation Consistent performance for steel production The combination of the WPP35G grade and the Tiger·tec Gold coating delivers wear resistance and consistent cutting behaviour in ISO P applications (steel). The coated carbide substrate is engineered to manage the heat and chip formation typical for steel machining; this means fewer insert changes and more predictable cycle times. For production environments where component repeatability matters, the insert’s material pairing and coating technology contribute to steady tool life and reduced scrap rates, improving overall process efficiency. Robust geometry that protects the cutting edge A rectangular shape combined with a 0° negative rake and a 0.8 mm corner radius enhances edge stability under interrupted cuts and higher feed rates. Negative rake geometry increases edge strength and reduces the risk of chipping during heavy cuts, while the modest corner radius balances durability with achievable surface quality. The tolerance class H supports consistent seat fitment and repeatable positioning in toolholders, ensuring the insert performs reliably across batch runs. Controlled chips and improved surface finish The B57T chipbreaker is designed to direct and break chips effectively when machining steels, reducing entanglement and promoting safe evacuation from the cutting zone. Better chip control lowers thermal load on the tool and workpiece, which in turn helps maintain dimensional accuracy and surface finish. For users transitioning from common grades, the Tiger·tec Gold finish and chip geometry give an immediate uplift in process stability and fewer interruptions, making the tool suitable for both roughing and mixed finishing tasks. Ready integration and clear specification for selection Available as a 12 mm rectangular insert with thickness code 06 and the ISO designation LNHU120608-B57T WPP35G, the insert fits standard Walter toolholders that accept this format. The grade is tailored to the steel material group (P), giving a broad application range from general-purpose to more wear-demanding operations. When choosing cutting parameters, prioritise stable feeds and sufficient coolant or lubrication for steel to exploit the grade’s optimised wear characteristics; this approach yields economical machining through extended time between indexings. For specification support, cutting data recommendations or to secure stock of the Walter Tools LNHU120608-B57T WPP35G insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to discuss the best grade and holder combination for the task. Technical data Article number: LNHU120608-B57T-WPP35G-WALTER Designation: LNHU120608-B57T WPP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Size: 12 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Thickness code: 06 Tolerance class: H Special features Series: Tiger·tec Gold Grade: WPP35G (coated carbide) Chipbreaker: B57T Insert shape: Rectangle Material group: P (steel) FAQ What materials is this insert suitable for? The LNHU120608-B57T WPP35G is specified for ISO P applications and is intended primarily for machining steel; the WPP35G grade and Tiger·tec Gold coating are optimised for steel-specific heat and chip conditions. How does the B57T chipbreaker improve machining? The B57T chipbreaker on the LNHU120608-B57T promotes predictable chip formation and breakage, reducing chip congestion and lowering thermal load on the cutting edge while supporting consistent surface quality. Is the insert suitable for roughing and finishing operations? Yes—the insert’s 0.8 mm corner radius and negative 0° rake give edge robustness for roughing while still allowing acceptable surface quality in semi-finishing with appropriate cutting data. What benefits does Tiger·tec Gold provide? Tiger·tec Gold coating on the WPP35G grade increases wear resistance and offers better process stability, which typically extends tool life and reduces the frequency of index changes in steel machining. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, brand-new merchandise from the manufacturer. The Walter Tools brand is used herein for product identification only.
LNHU120608-F57T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coated carbide and a dedicated F57T chipbreaker to achieve consistent chip control and extended tool life when machining steel and cast iron; order directly via Metav Werkzeuge or consult our specialists for application support. LNHU120608-F57T WKP25S — Milling indexable insert (rectangular) for steel and cast iron, Walter Tools The LNHU120608-F57T WKP25S is a rectangular milling insert from the Tiger·tec Silver series, developed for productive machining of steels and cast irons with reliable wear resistance and predictable performance. Tiger·tec Silver coated carbide grade WKP25S Optimised for steel and cast iron machining Rectangular insert with 0.8 mm corner radius Negative 0° rake and F57T chipbreaker Durable coated grade for demanding milling operations The WKP25S grade from the Tiger·tec Silver range is a coated carbide designed to balance wear resistance and toughness for continuous, industrial milling. As a coated cutting grade, it reduces flank and crater wear under the thermal loads typical when machining steel and the abrasive conditions of cast iron. This combination results in longer tool life and fewer index changes, which supports higher uptime and lower unit cost per component. For production environments seeking steady cycle times, the proven coating technology helps maintain cutting-edge integrity over extended runs. Stable geometry and precise chip control for consistent surfaces The rectangular geometry with a 0.8 mm corner radius and the dedicated F57T chipbreaker provide predictable chip formation and evacuation. The insert’s negative 0° rake increases cutting edge robustness, reducing the risk of chipping during interrupted cuts or heavy engagement. In practice, this means improved stability at higher feed rates and a more consistent surface finish, reducing downstream rework. The chipbreaker is tuned to the grade and geometry to produce short, controllable chips in cast iron while managing heat and continuous chips in steel, supporting both process reliability and operator safety. Precision manufacturing for reliable toolholder integration Manufactured to a tolerance class H, the insert ensures repeatable seating and clamping in standard rectangular toolholders. The rectangular form and execution code U denote a design that prioritises secure clamping and straightforward indexing. Such dimensional consistency reduces set-up variability and supports reproducible machining across multiple cutters. Where tight dimensional control and interchangeability are required, this consistency simplifies tool management and contributes to overall process security in both small-batch and serial production. Application guidance to maximise productivity Specified for ISO groups P and K, the insert is particularly suited to unalloyed and alloyed stainless applications in steel (P) and the abrasive, short-chipping behaviour of cast iron (K). As a coated grade engineered for these material families, the insert helps balance wear resistance and edge strength to deliver consistent component quality. For best results, select a toolbody that matches the rectangular insert seat and check clamping torque recommendations from the toolholder manufacturer; the grade’s strengths are most evident when combined with stable fixturing and adequate coolant or chip removal strategies. The coated carbide construction supports prolonged service life and predictable index changes, aiding planning for tool replenishment and inventory. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools Tiger·tec Silver inserts into existing processes; our consultants will recommend suitable toolholders, cutting strategies and grade selection for the LNHU120608-F57T WKP25S. Technical Data SKU: LNHU120608-F57T-WKP25S-WALTER Designation: LNHU120608-F57T WKP25S Product type: Milling indexable insert Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: F57T Facts Plate size: 12 Corner radius: 0.8 mm Thickness code: 06 Free angle: 0° (negative) Tolerance class: H Special features Coated carbide cutting grade Rectangular insert form Execution: U Material suitability: P / K (steel and cast iron) Optimised chip control for production milling FAQ Which materials is this insert suitable for? The LNHU120608-F57T WKP25S from Walter Tools is formulated for ISO groups P and K, meaning it is suitable for machining steel (unalloyed and alloyed) and cast iron applications. What benefits does the WKP25S grade offer? WKP25S is a coated carbide grade within the Tiger·tec Silver family that provides enhanced wear resistance and edge stability for extended tool life when machining steel and cast iron. How does the F57T chipbreaker influence performance? The F57T chipbreaker promotes controlled chip formation and evacuation, reducing the risk of long, entangling chips in steel and producing short, manageable chips in cast iron, which improves both process reliability and surface quality. What does the 0° negative rake mean for cutting? A 0° (negative) rake increases the cutting edge’s robustness, making the insert more resistant to chipping during interrupted cutting and when encountering hard inclusions, at the cost of slightly higher cutting forces—beneficial for heavy-duty milling. Is the insert suitable for all rectangular toolholders? The insert’s dimensions and tolerance class H ensure accurate seating in compatible rectangular toolholders, but verification of seat geometry and clamping specifications with the chosen toolbody is recommended. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
LNHU120608-F57T WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WKP35G grade for productive machining of steel and cast iron; the robust F57T chipbreaker and rectangular form support consistent chip control and stable tool life. Order the LNHU120608-F57T WKP35G insert directly via Metav Werkzeuge or consult our advisers for machining guidance. LNHU120608-F57T WKP35G – Walter Tools indexable milling insert, Tiger‑tec Gold, F57T chipbreaker A LNHU120608-F57T WKP35G indexable milling insert designed for productive machining of steel and cast iron in versatile milling applications Tiger‑tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron F57T chipbreaker for controlled chip formation Rectangular 12 size with 0° negative clearance Increase throughput with a coated grade tuned for mixed materials The combination of Tiger‑tec Gold technology and the WKP35G grade delivers a coated cemented‑carbide solution optimised for applications in steel and cast iron. As a result, the insert offers enhanced wear resistance and predictable performance in varying production scenarios. The design supports higher cutting productivity through stable edge behaviour and reliable wear progression, which reduces unplanned downtime and contributes to a more efficient machining cycle. Reliable chip control for safer, repeatable milling The specialised F57T chipbreaker manages chip formation to reduce entanglement and improve evacuation during both continuous and interrupted cuts. For workshops unfamiliar with chipbreaker terminology: a chipbreaker shapes and breaks chips to prevent long, stringy swarf that can foul the tool or workpiece. Combined with the rectangular geometry and 0.8 mm corner radius, this results in consistent surface quality and easier post‑process handling of swarf, particularly when machining abrasive or brittle cast materials. Robust geometry for heavy‑duty operations and repeatability The insert’s 0° (negative) clearance and rectangular format provide a robust cutting edge that tolerates higher mechanical loads and supports aggressive milling strategies where required. The H tolerance class ensures manufacturing repeatability and interchangeability of inserts, which aids process stabilisation across tool changes. These attributes make the component suitable for series production where consistent tool behaviour and predictable tool life are priorities. Practical applications and process notes for best results Intended primarily for the machining of steel (ISO group P) and cast iron (ISO group K), the insert performs across a range of operations, depending on cutter geometry and process parameters. For catalogue‑dependent main applications, pairing this insert with appropriate cutter bodies and optimised cutting data will unlock its full potential. For complex or high‑value components, it is advisable to validate cutting parameters in a short series trial to balance productivity and tool life. For machining strategies that demand a durable, multi‑material insert from Walter Tools, contact Metav Werkzeuge for availability and tailored application advice: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LNHU120608-F57T-WKP35G-WALTER Designation (ISO): LNHU120608-F57T WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: F57T Shape: Rectangular Facts Corner radius: 0.8 mm Plate size: 12 Plate thickness: 06 Clearance: 0° (negative) Tolerance class: H Execution: U Special features Coating: Tiger‑tec Gold (coated cemented carbide) Material applications: steel (P) and cast iron (K) Coated carbide grade for stable wear behaviour Rectangular insert for versatile milling FAQ What materials is this insert suitable for? This insert is suitable for machining steel (ISO group P) and cast iron (ISO group K) thanks to the WKP35G grade and Tiger‑tec Gold coating. How does the F57T chipbreaker help in production? The F57T chipbreaker shapes and breaks chips for safer evacuation, reducing chip entanglement and improving surface consistency when using the insert in milling operations. Is the insert compatible with standard tool holders? The insert uses a rectangular form and H tolerance class to support repeatable mounting; compatibility depends on the cutter body and clamping system selected. What does the 0° (negative) clearance mean for cutting? A 0° negative clearance provides a robust cutting edge that resists mechanical loading and is beneficial for operations requiring edge stability and durability. Can the insert be used for both roughing and finishing? Depending on cutter geometry and process settings, the insert can be applied in roughing or semi‑finishing operations; process validation is recommended for high‑precision tasks. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen
LNHU120608-F57T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of precision, robust chip control and broad material compatibility for dependable milling performance; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. LNHU120608-F57T WKP35S — milling insert, Tiger·tec Silver, Walter Tools A high-performance rectangular milling insert, LNHU120608-F57T WKP35S, designed for machining steel and cast iron with the Tiger·tec Silver coating and an F57T chipbreaker Tiger·tec Silver coating for long tool life Optimised for steel and cast iron machining F57T chipbreaker for consistent chip control 0° negative relief angle for stable milling Higher throughput through optimised coating and grade The Tiger·tec Silver series combined with the WKP35S grade delivers an excellent balance between wear resistance and toughness. As a coated carbide insert, it is formulated to manage the heat and abrasive forces typical when machining steel and cast iron, reducing flank wear and extending tool life. This results in higher process reliability and fewer tool changes, which directly supports continuous production and lower overall machining costs. The combination of coating technology and grade composition is especially beneficial for medium to heavy milling where consistent performance matters. Reliable chip control and geometry that enhances productivity Equipped with the F57T chipbreaker and a rectangular geometry, the insert promotes controlled, repeatable chip formation that helps avoid built-up edge and unstable cutting conditions. The 0° negative relief angle provides a robust cutting edge suited to interrupted cuts and heavy engagement, while the 0.8 mm corner radius improves edge strength for roughing operations. Together these features enable higher feed rates and consistent surface results, making the component a pragmatic choice for manufacturers seeking measurable productivity gains and stable cycle times. Practical selection and application guidance for the workshop This insert is presented in the LNHU120608-F57T format with plate size 12 and thickness 06, matching standard toolholders for rectangular inserts. Its specification supports machining under ISO groups P and K — that is, steel and cast iron — and is therefore suitable for a wide range of production tasks from general-purpose milling to more demanding finishing and semi-roughing applications. The robust design reduces the need for frequent adjustment, and the predictable wear behaviour simplifies process planning and inventory management. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Silver inserts and application-specific optimisation — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: LNHU120608-F57T-WKP35S-WALTER Designation: LNHU120608-F57T WKP35S Brand: Walter Tools Facts Relief angle: 0° (negative) Corner radius: 0.8 mm Insert size: 12 Plate thickness: 06 Tolerance class: H Special features Series: Tiger·tec Silver Grade: WKP35S (coated carbide) Chipbreaker: F57T Shape: Rectangular Material suitability: P / K (steel, cast iron) Execution: U FAQ What materials is this insert suitable for? This insert is suitable for steel and cast iron applications; the WKP35S grade and Tiger·tec Silver coating are optimised for ISO groups P and K. How does the F57T chipbreaker benefit milling operations? The F57T chipbreaker promotes consistent chip formation and evacuation, which enhances process stability and reduces the risk of built-up edge when using the LNHU120608-F57T WKP35S insert. Is the insert geometry appropriate for interrupted cuts? Yes, the 0° negative relief angle and rectangular form provide a robust cutting edge that withstands interrupted milling and heavier engagements. What advantage does the Tiger·tec Silver coating provide? Tiger·tec Silver offers improved wear resistance and thermal stability, extending tool life and supporting higher cutting speeds in production environments. Can this insert be used for finishing and roughing? The insert’s 0.8 mm corner radius and coated carbide grade make it suitable for both semi-roughing and finishing, depending on the chosen cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer (Walter Tools).
LNHU120608-F57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, a robust 0.8 mm corner radius and stable 0° negative rake for uninterrupted steel machining; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. LNHU120608-F57T WPP35G indexable milling insert — Tiger·tec Gold, 0° negative rake (Walter Tools) The LNHU120608-F57T WPP35G is an indexable milling insert optimised for steel machining, offering a coated-carbide grade designed for reliable chip formation and consistent tool life Tiger·tec Gold coated carbide grade WPP35G Optimised for steel machining (ISO P) Negative 0° rake for stable cutting Rectangular insert, 0.8 mm corner radius Consistent chip control for fewer interruptions The Tiger·tec Gold coating combined with the F57T chipbreaker provides controlled chip formation when working with steels. This reduces the frequency of manual chip management and minimises toolholder overload, which in turn supports steadier cycle times. For shops where uptime matters, the coated carbide construction improves wear resistance while the chip geometry eases evacuation, translating directly into more predictable machining and fewer unplanned stops. Stable edge life under higher loads A 0° negative rake and a 0.8 mm corner radius yield a robust cutting edge that resists chipping under moderate to heavy engagement. The rectangular form contributes to secure clamping and even load distribution across the seat, so the insert maintains dimensional stability in interrupted and continuous cuts alike. For applications requiring repeatable results, this combination enhances edge security and reduces the need for frequent tool changes. Broad suitability across steel grades The WPP35G grade is tailored for ISO P materials and strikes a balance between toughness and wear resistance. It copes with typical heat build-up and chip characteristics encountered in unalloyed and alloyed steels, making it suitable for general-purpose milling where both economy and surface finish are priorities. The grade’s design supports a range of cutting conditions, so single-grade inventory can cover multiple steel components while maintaining process reliability. Practical integration for workshop efficiency Available in the LNHU120608-F57T geometry with standard sizing, the insert fits established indexable milling systems and simplifies tool management. The combination of the Tiger·tec Gold series and a defined chipbreaker reduces regrinding needs and eases tool selection for production planning. With clear grade and geometry markers, the insert supports predictable reordering and streamlined tooling logistics for machine shops focused on throughput and consistent part quality. For application advice on the Walter Tools LNHU120608-F57T WPP35G insert or to confirm suitability for specific steel grades, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or phone +49 2822 7131930 — our consultants will advise on tooling selection and supply. Technical data SKU: LNHU120608-F57T-WPP35G-WALTER Article designation: LNHU120608-F57T Full designation: LNHU120608-F57T WPP35G Product type: Indexable milling insert Series: Tiger·tec Gold Grade: WPP35G Manufacturer: Walter Tools Measurements / core data Corner radius: 0.8 mm Rake: 0° (negative) Size: 12 Thickness: 06 Tolerance class: H Design / special features Shape: Rectangular Chipbreaker: F57T Coating: Tiger·tec Gold (coated carbide) Material suitability: Steel (ISO P) Execution: U Intended application: Milling / indexable insert FAQ Which materials is this insert suitable for? The LNHU120608-F57T WPP35G insert from Walter Tools is optimised for ISO P (steel) applications, covering unalloyed and alloyed steels with reliable chip control. What does the WPP35G grade offer compared with other grades? WPP35G is a Tiger·tec Gold coated-carbide grade focused on balanced wear resistance and toughness; the LNHU120608-F57T WPP35G is therefore suitable where consistent tool life and surface finish are required in steel machining. How does the 0° negative rake affect cutting behaviour? A 0° negative rake increases edge robustness and stability under load, so the Walter Tools insert resists chipping in interrupted cuts and heavy engagement situations while maintaining form accuracy. Is the chipbreaker F57T suitable for medium-depth milling passes? Yes, the F57T chipbreaker on this insert is designed to manage chips efficiently in typical steel milling operations, helping to maintain process security and reduce manual intervention. Can this insert be used in existing rectangular toolholders? The LNHU120608-F57T geometry matches standard rectangular indexable milling systems; verify seat compatibility and clamping parameters with existing holders before assembly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU120608-F57T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of high wear resistance and reliable chip control for uninterrupted milling of tough materials; the combination of the Tiger·tec Gold coating and the WSM35G grade ensures long tool life and stable cutting edges. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. LNHU120608-F57T WSM35G milling indexable insert by Walter Tools — Tiger·tec Gold, chipbreaker F57T, negative 0° LNHU120608-F57T WSM35G is a rectangular milling insert designed for heavy-duty milling of rostfreier Stahl and heat-resistant alloys, combining Tiger·tec Gold coating with a robust chipbreaker for stable machining. *Tiger·tec Gold coating for extended tool life *Optimised chipbreaker F57T for secure chip control *0.8 mm corner radius for reliable edge stability *Negative 0° rake for heavy-duty milling Longer service life from advanced coating technology The Tiger·tec Gold coating paired with the WSM35G cemented carbide grade offers outstanding resistance to flank wear and thermal loading. This combination supports consistent cutting performance when machining materials that generate heat and adhesion, such as rostfreier Stahl and nickel-base superalloys. By reducing the tendency to build up material on the cutting edge, the coating prolongs insert life and lowers tool-change frequency, which contributes directly to improved process economy and less unscheduled downtime. Controlled chips and dependable cutting geometry The integrated F57T chipbreaker is engineered for secure chip formation and evacuation under interrupted or continuous milling. The rectangular form and the 0.8 mm corner radius deliver mechanical strength at the cutting edge, while the 0° (negative) rake angle increases edge robustness for heavier cuts. Together, these properties enable stable cutting forces and predictable machining behaviour, which is particularly advantageous in operations where surface integrity and reproducible dimensions are required. Consistent performance in demanding materials and applications Designed for applications in group S and M according to ISO classification, the insert excels with high-temperature alloys, titanium and rostfreier Stahl where heat and strain on the cutting edge are critical factors. The insert geometry and coating choice minimise built-up edge and provide reliable edge retention, supporting repeatable component quality. Integration into existing milling systems is straightforward thanks to the standard designation LNHU120608-F57T WSM35G, making it suitable for production runs where repeatability and tool life are key performance indicators. Contact Metav Werkzeuge for tailored application support and to secure the Walter Tools LNHU120608-F57T WSM35G insert for challenging rostfreier Stahl and superalloy milling tasks Technical data Article number: LNHU120608-F57T-WSM35G-WALTER SKU: LNHU120608-F57T-WSM35G-WALTER Product type: Fräswendeschneidplatte (milling indexable insert) Facts Size: 12 Thickness code: 06 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: H Special features Series: Tiger·tec Gold Grade: WSM35G (coated cemented carbide) Chipbreaker: F57T Plate form: rectangle Material suitability: rostfreier Stahl; S (heat-resistant alloys/titanium) and M (rostfreier Stahl) Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The LNHU120608-F57T WSM35G insert is suitable for machining rostfreier Stahl and heat-resistant alloys (ISO groups S and M), thanks to the Tiger·tec Gold coating and the WSM35G grade. How does the F57T chipbreaker affect machining? The F57T chipbreaker on the LNHU120608-F57T optimises chip formation and evacuation, resulting in stable cutting forces and improved surface quality during milling. What advantages does the negative 0° rake provide? A 0° (negative) rake increases cutting-edge strength on the LNHU120608-F57T insert, enabling heavier cuts and greater resistance to edge chipping in demanding milling operations. Is this insert suited to high-temperature or hard-to-cut alloys? Yes, the WSM35G grade combined with Tiger·tec Gold coating is formulated for high-temperature stability and wear resistance, making the insert appropriate for superalloys and titanium in many milling applications. What is the role of the 0.8 mm corner radius? The 0.8 mm corner radius provides a robust edge geometry that improves tool life and reduces the risk of chipping during roughing and semi-finish passes. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of Walter Tools.
LNHU120608-F57T WSP45G Wendeplatten - Walter Tools
Combine the Tiger·tec Gold coating with the versatile WSP45G grade and the secure negative 0° geometry for reliable milling of steel, stainless steel and heat-resistant alloys; order the insert via Metav Werkzeuge or contact our consultants for application support. LNHU120608-F57T WSP45G – Rectangular milling insert, Tiger·tec Gold, Walter Tools LNHU120608-F57T WSP45G is a rectangular indexable milling insert designed for productive milling of steels, stainless steels and difficult-to-machine superalloys. Tiger·tec Gold coating for extended tool life Suitable for steel, stainless steel and S-class alloys Rectangular shape with 0.8 mm corner radius Chipbreaker F57T for consistent chip control Longer cutting life through advanced coating and grade The combination of Tiger·tec Gold surface technology and the WSP45G grade provides a robust, PVD-coated cutting edge that resists abrasive wear and preserves edge geometry under elevated temperatures. This results in a measurable reduction of unscheduled tool changes and improved process stability. For production environments where consistent cycle times are critical, the insert’s engineered coating and carbide substrate translate into fewer interruptions and predictable performance. Broad material capability for flexible use in production Designed for universal milling duties, the insert supports machining of steel, stainless steel and demanding S materials such as nickel‑base superalloys and titanium. The substrate and coating pairing enables controlled chip formation and thermal resistance where conventional grades would soften or develop built-up edge. For shops running mixed batches or small-series components, the insert offers the practical advantage of one grade covering multiple ISO material groups. Geometry and chip control that protect the cutting edge The rectangular geometry with a 0.8 mm radius and a negative 0° clearance angle gives reliable edge support and dimensional stability in interrupted cuts and heavy engagement. The F57T chipbreaker is shaped to promote stable chip evacuation and reduce heat concentration at the cutting zone, which benefits surface integrity and tool life. The insert format matches common milling bodies and enables fast index changes to get production moving again without complex adjustments. For application guidance or to specify Walter Tools inserts such as LNHU120608-F57T WSP45G for a particular machining task, contact Metav Werkzeuge for tailored recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LNHU120608-F57T-WSP45G-WALTER Designation: LNHU120608-F57T WSP45G Manufacturer: Walter Tools Facts Plate size: 12 Corner radius: 0.8 Clearance angle: 0° (negative) Plate thickness: 06 Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated cemented carbide) Chipbreaker: F57T Shape: Rectangular Substrate material: P / M / S Tolerance class: H FAQ What materials can this insert machine effectively? The LNHU120608-F57T WSP45G insert is suitable for machining steel, stainless steel and S‑class heat‑resistant alloys, making it a versatile choice for mixed production runs. How does the Tiger·tec Gold coating benefit production? Tiger·tec Gold on the WSP45G grade increases wear resistance and thermal stability, which helps to extend cutting life and reduce downtime in continuous milling operations. What does the 0.8 mm corner radius mean for component finish? A 0.8 mm radius provides a strong cutting edge that improves dimensional stability and tends to produce a more robust surface finish in roughing and semi‑finishing passes. Is the rectangular format compatible with standard milling holders? The rectangular shape and the LNHU120608-F57T designation match common milling bodies; compatibility should be confirmed with the toolholder specifications before ordering. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Markennamen and protected product names are mentioned for explanation only; there is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new merchandise of the manufacturer.
LNHU130608R-L55T WAK15 Wendeplatten - Walter Tools
Benefit from the combination of Walter N‑series consistency, the sharp uncoated WAK15 grade for aluminium and non‑ferrous metals, and the L55T chipbreaker for reduced built‑up edge; order the insert directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. LNHU130608R-L55T WAK15 indexable milling insert — negative 0° relief, L55T chipbreaker — Walter Tools The LNHU130608R-L55T WAK15 is an indexable milling insert designed for high‑quality machining of aluminium and other non‑ferrous metals, combining a sharp cutting geometry with a chipbreaker optimised to prevent material adhesion Uncoated carbide grade WAK15 for non‑ferrous metals L55T chipbreaker reduces built‑up edge Negative 0° relief for stable engagement Rectangular 13 mm insert, 0.8 mm corner radius Faster, cleaner aluminium machining through edge geometry The combination of the WAK15 uncoated carbide grade and a finely tuned cutting geometry ensures efficient removal of soft, ductile materials such as aluminium and other non‑ferrous metals. The uncoated carbide offers a very sharp edge that reduces cutting forces and helps to avoid torn surfaces; the result is improved surface finish and fewer secondary operations. In practical terms, this means shorter cycle times and reduced rework when machining thin‑walled components or profiles where adhesion would otherwise degrade results. Stable engagement with negative relief for reliable productivity A negative 0° relief provides a robust contact zone between the insert and the toolholder, increasing stability during interrupted cuts and plunge operations. This geometry supports secure clamping and helps maintain a consistent cutting edge under moderate radial loads, translating into predictable tool life and fewer insert changes. For production environments where repeatability matters, the stable engagement reduces vibration and contributes to constant part tolerances across batches. Chip control designed to prevent material build‑up The L55T chipbreaker is engineered to direct chips away from the cutting zone and to minimise built‑up edge when working with sticky materials. Good chip control reduces the risk of smearing and sticking on the flank face, which in turn protects the cutting edge and preserves dimensional accuracy. For users transitioning from conventional tools, this feature helps to maintain process reliability while preserving surface integrity on delicate aluminium alloys. Practical specification and compatibility for workshop selection The insert is supplied in a rectangular form with a nominal size of 13 mm and a corner radius of 0.8 mm, thickness code 06, and tolerance class H. These dimensions make it suitable for a range of common toolholders used in face and shoulder milling of non‑ferrous components. The product belongs to the Walter N‑series, which is noted for consistent manufacturing quality; matching toolholders to the insert geometry ensures optimal clamping and cutting performance. For precise advice on integrating this Walter Tools indexable milling insert into a production process or to request specific cutting data, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with our technical advisers and arrange supply. Technical Data SKU: LNHU130608R-L55T-WAK15-WALTER Product type: Indexable milling insert Designation: LNHU130608R-L55T WAK15 Manufacturer: Walter Tools Core Data Insert size: 13 Thickness: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Shape: Rectangular Special features Grade: WAK15 (uncoated carbide) Chipbreaker: L55T Series: Walter N‑Sortensystem Material application: Aluminium and non‑ferrous metals Tolerance class: H FAQ Which materials are suitable for this insert? The LNHU130608R-L55T WAK15 insert from Walter Tools is intended for aluminium and other non‑ferrous metals in accordance with ISO 513 classifications. Is the cutting grade coated or uncoated? The WAK15 grade is uncoated carbide, selected to provide a very sharp edge and minimise adhesion when machining non‑ferrous materials. What is the relief or clearance angle of the insert? This insert has a 0° negative relief, offering increased stability and secure engagement for milling operations with moderate radial loads. What are the insert dimensions and form? The insert is rectangular, nominal size 13, thickness code 06, with a 0.8 mm corner radius and tolerance class H. How does the L55T chipbreaker help in practice? The L55T chipbreaker guides chips away from the cutting zone and reduces built‑up edge, which preserves the cutting edge and improves surface finish when machining aluminium alloys. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
LNHU130608R-L55T WKK25G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, a dedicated chipbreaker L55T for controlled chips, and a robust 0° negative rake for stable milling of cast iron; order the insert directly via Metav Werkzeuge or request application advice from our consultants. LNHU130608R-L55T WKK25G milling insert for cast iron | Walter Tools The LNHU130608R-L55T WKK25G is a rectangular milling indexable insert designed for productive machining of cast iron, featuring Tiger‑tec Gold coating and a chipbreaker tuned for short, breaking chips. Tiger‑tec Gold coating for wear resistance Optimised for cast iron machining Rectangular insert, 13 mm width 0° negative rake, 0.8 mm corner radius Higher productivity through engineered coating and grade The coated carbide grade WKK25G, part of the Tiger‑tec Gold family, is formulated for the abrasive wear typical of cast iron machining. This creates a direct productivity advantage: longer cutting edge life and fewer insert changes reduce downtime and machine idle time. The coating technology improves thermal stability and adhesion, which means more consistent performance under the shock‑prone conditions often encountered when milling grey and nodular cast iron. As a result, the insert delivers reliable tool life and predictable replacement intervals, supporting efficient production planning. Geometry and chip control for safer, cleaner milling The rectangular geometry with a 13 mm cutting width and the L55T chipbreaker are designed to handle the short, brittle chips produced by cast iron. The combination of a 0° negative rake and a 0.8 mm corner radius gives a robust cutting edge that resists chipping during interrupted cuts and heavy radial engagement. Improved chip control reduces recutting and potential damage to the workpiece, helping to maintain surface quality and decrease rework. These design features translate into fewer tool interventions and steadier cycle times on milling operations. Practical application guidance and process benefits This insert suits face and peripheral milling operations where consistent chip formation and wear resistance are priorities. The grade is optimised for cast iron according to ISO group K, offering a balance between wear resistance and toughness for typical foundry alloys. The dimensional and tolerance data support straightforward seat fitting and repeatable clamping. For tailored parameter settings or specific workpiece conditions, technical consultation is recommended; Metav Werkzeuge can provide application hints and availability information to match machining goals while safeguarding component finish and tool economy. Contact Metav Werkzeuge for application support and supply of Walter Tools Tiger‑tec Gold inserts; call +49 2822 7131930 or email info@metav-werkzeuge.com for detailed machining recommendations and delivery options Technical data Article number: LNHU130608R-L55T-WKK25G-WALTER Name: LNHU130608R-L55T WKK25G Manufacturer: Walter Tools Product type: milling indexable insert Series: Tiger‑tec Gold Facts Insert width: 13 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Thickness code: 06 Tolerance class: H Special features Grade: WKK25G Coating technology: Tiger‑tec Gold Chipbreaker: L55T Shape: rectangular Suitable for: cast iron machining FAQ What materials is this insert intended for? The insert is intended primarily for cast iron machining; the WKK25G grade and Tiger‑tec Gold coating are optimised for the abrasive, short‑chip behaviour of cast iron. How does the L55T chipbreaker help process stability? The L55T chipbreaker promotes the formation of short, controllable chips when milling cast iron, which reduces recutting and improves surface consistency when using the LNHU130608R-L55T WKK25G insert. Is the insert suitable for interrupted cuts and heavy engagement? Yes. The 0° negative rake and the 0.8 mm corner radius provide a robust cutting edge that withstands shock and reduces the risk of chipping during interrupted cuts. Which series and coating does the insert use? The insert belongs to the Tiger‑tec Gold series and uses a coated carbide grade WKK25G, promoting wear resistance in abrasive applications. How should the insert be specified when ordering? Specify the full designation (LNHU130608R-L55T WKK25G) and mention Walter Tools as the manufacturer; the SKU is LNHU130608R-L55T-WKK25G-WALTER for unambiguous identification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU130608R-L55T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger‑tec Silver coating and the WKP25S grade for stable edge life and reliable machining of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the Metav team for application support. LNHU130608R-L55T WKP25S milling indexable insert – Tiger‑tec Silver, for steel & cast iron | Walter Tools The LNHU130608R-L55T WKP25S is a rectangular milling insert designed for productive machining of steel and cast iron, featuring a Tiger‑tec Silver coating and a 0° negative rake for robust cutting performance Tiger‑tec Silver coating for edge stability Grade WKP25S for steel and cast iron Negative 0° rake for robust cutting 0.8 mm corner radius for edge strength Higher throughput through a wear‑resistant grade The combination of Tiger‑tec Silver technology and the WKP25S grade provides a wear‑resistant, coated carbide solution that is optimised for the ISO material groups P and K. This means the insert copes with the typical heat and chip formation of steels while also resisting the abrasive nature of cast iron. The result is consistent edge life and fewer unscheduled tool changes, which supports continuous production and predictable machining costs. Where process stability matters, this grade delivers reproducible results without complex intervention. Reliable chip control that keeps the process running Built with the chipbreaker L55T and a rectangular form, the insert promotes controlled chip formation and efficient evacuation during peripheral and face milling operations. The 0° rake (negative) gives the geometry robustness for interrupted cutting and heavy engagement, helping to avoid unstable cuts and tool damage. Better chip control reduces machine stoppages and makes coolant and chip‑conveyance strategies more effective, supporting a smoother workflow on the shop floor. Robust geometry for repeatable surface quality With a 0.8 mm corner radius and a defined tolerance class H, the insert offers a balance between edge strength and achievable surface finish. The insert's geometry maintains dimensional consistency across tool changes, aiding process repeatability and helping to meet tightening component tolerances. The combination of stable cutting edge and reliable dimensions supports both serial production and demanding one‑off components where reproducible results and minimal rework are required. The LNHU130608R‑L55T WKP25S is thus a practical choice for production environments that prioritise uptime and quality. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Silver inserts or request tailored machining recommendations via info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: LNHU130608R-L55T-WKP25S-WALTER Label: Fräswendeschneidplatte LNHU130608R-L55T WKP25S Walter Tools Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger‑tec Silver Grade: WKP25S ISO designation: LNHU130608R-L55T WKP25S Facts Rake angle: 0° (negative) Corner radius: 0.8 mm Insert size: 13 Thickness code: 06 Tolerance class: H Special features Tiger‑tec Silver coating technology WKP25S coated carbide grade Chipbreaker L55T Material groups: P / K (steel, cast iron) Rectangular insert form FAQ What materials is this insert suitable for? The LNHU130608R‑L55T WKP25S milling indexable insert from Walter Tools is specified for ISO groups P and K, i.e. steel and cast iron, and its WKP25S grade and Tiger‑tec Silver coating are adapted to those material behaviours. How does the chipbreaker L55T affect machining? The chipbreaker L55T on this insert promotes controlled chip formation and evacuation, which improves process stability and reduces the risk of recut chips during milling with the LNHU130608R‑L55T WKP25S insert. What does the 0° rake mean in practice? A 0° rake (negative) creates a robust cutting edge that tolerates heavier engagement and interrupted cuts; this geometry favours durability and secure cutting conditions with the Walter Tools insert. Is the corner radius suitable for finishing? The 0.8 mm corner radius on the insert increases edge strength while still allowing good surface quality in many general machining tasks; selection should be matched to the required surface finish and cutting parameters. What does tolerance class H indicate for this insert? Tolerance class H denotes the insert's dimensional specification and consistency; for the LNHU130608R‑L55T WKP25S this supports repeatable positioning and predictable results in fixture and toolholder setups. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no association between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
LNHU130608R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold wear resistance, a WKP35G coated‑carbide grade adapted to steel and cast iron, and the stable 0° negative rake for consistent machining results; order directly via Metav Werkzeuge or consult our specialists for tailored application advice. LNHU130608R-L55T WKP35G rectangular milling insert — Tiger‑tec Gold coated, for steel and cast iron (Walter Tools) A LNHU130608R-L55T WKP35G rectangular indexable insert designed for productive milling of steel and cast iron with a controlled chipbreaker and robust edge geometry Tiger‑tec Gold coating for long tool life Optimised for steel and cast iron machining 0° negative rake for stable cutting forces 0.8 mm corner radius for reliable edge strength Maximise uptime with a high‑performance coated grade The WKP35G grade from the Tiger‑tec Gold family combines a modern multilayer coating with a wear‑resistant substrate to deliver prolonged tool life under typical steel and cast iron conditions. This coated‑carbide construction reduces flank wear and helps maintain dimensional accuracy over longer tool cycles, resulting in fewer changeovers and lower production interruption. The result is improved throughput and predictable replacement intervals that support efficient shop‑floor planning. Consistent chip control and material suitability Designed for the ISO groups P (steel) and K (cast iron), the insert’s chipbreaker L55T is tuned to the characteristic chip forms of these materials. For steels that tend to produce long, continuous chips, the geometry promotes controlled breaking and evacuation; for cast iron, the insert tolerates abrasive conditions and frequent short chip formation. Compliance with ISO 513 material groupings provides clear orientation when selecting grades for mixed‑material production runs. Stable cutting geometry for repeatable results The rectangular shape with a 0° negative rake delivers low deflection and stable cutting forces during interrupted or heavy engagement milling. A 0.8 mm corner radius enhances edge strength and reduces chipping risk when machining tougher workpieces, supporting consistent surface finish and repeatable tolerances. The insert’s format and thickness are engineered for secure clamping in compatible toolholders, which maintains concentricity and run‑out control throughout the machining operation. Practical application and process guidance The insert is well suited to general and semi‑finishing milling tasks where durability and process security matter. The WKP35G coating technology permits higher cutting speeds than conventional uncoated grades, while the chipbreaker helps avoid built‑up edge and improves evacuation in slotting or face milling. Integration into existing tool systems is straightforward when the correct LNHU‑style pocket is used; for process optimisation, consult machining tables and adjust feeds to exploit the grade’s wear resistance without overloading the cutting edge. For reliable production results with Walter Tools technology, request a technical quotation for the LNHU130608R-L55T WKP35G from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and cutting data Technical Data Article number: LNHU130608R-L55T-WKP35G-WALTER Brand: Walter Tools Product type: Rectangular milling insert Grade/series: WKP35G / Tiger‑tec Gold Material group suitability: P (steel), K (cast iron) Facts Corner radius: 0.8 mm Rake angle: 0° (negative) Plate size: 13 mm Thickness: 6 mm Chipbreaker: L55T Tolerance class: H Special features Coating technology: Tiger‑tec Gold Coated carbide grade WKP35G Rectangular plate form Robust edge for interrupted cuts Suited to LNHU insert geometries FAQ Which materials can this insert machine effectively? The LNHU130608R‑L55T WKP35G is designed for steel and cast iron (ISO groups P and K), with the WKP35G coating optimised to handle the heat and abrasive wear typical of these groups. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold on the WKP35G grade enhances wear resistance and edge stability, helping the insert maintain accuracy and prolonging service life under continuous milling conditions. What benefit does the 0° negative rake provide? A 0° negative rake offers increased cutting stability and reduced deflection, which is particularly useful in milling operations with variable engagement or interrupted cuts. Is the chipbreaker suitable for mixed milling operations? Yes, the L55T chipbreaker is configured to manage chip formation reliably across both continuous chips from steel and shorter chips from cast iron, improving evacuation and surface finish. How to select the right insert holder for this product? Use a toolholder compatible with the LNHU‑series rectangular inserts and verify pocket seating and clamping dimensions; Metav Werkzeuge can advise on holder compatibility and cutting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names are used for explanatory purposes only; there is no affiliation between our company and the brands mentioned. The offered item is original, brand‑new merchandise from the manufacturer Walter Tools.
LNHU130608R-L55T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S grade for consistent, productive machining of steel and cast iron; the rectangular geometry with a 0.8 mm corner radius and the L55T chipbreaker ensure controlled chip formation and long tool life — order the insert through Metav Werkzeuge or request detailed application advice. LNHU130608R-L55T WKP35S – Milling insert, Tiger‑tec Silver (Walter Tools) LNHU130608R-L55T WKP35S is a rectangular indexable milling insert designed for productive machining of steel and cast iron in industrial milling applications Tiger‑tec Silver coating technology Designed for steel and cast iron machining Rectangular insert with 0.8 mm corner radius Negative rake 0° and L55T chipbreaker High-efficiency machining with a wear‑resistant grade The combination of the Tiger‑tec Silver coating and the WKP35S grade delivers a balance between wear resistance and thermal stability that supports high process reliability in series production. The coating reduces adhesive and abrasive wear on the cutting edge, which translates into longer in‑service intervals and fewer tool changes. For operations where cycle time and predictable tool life determine output, the insert’s formulation targets the typical heat generation and chip behaviour encountered when machining steel and cast iron, helping to maintain consistent component quality and reduce downtime. Geometry and chip control that improve productivity The rectangular geometry with a 0.8 mm corner radius provides a sturdy cutting edge that resists chipping during interrupted cuts and heavy roughing passes. The negative rake angle of 0° contributes to a robust edge for stable engagement with the workpiece, while the L55T chipbreaker is designed to produce short, controlled chips in the ISO P and K material groups. For users less familiar with insert geometry: a larger corner radius generally increases edge strength and tool life at the expense of slightly higher cutting forces, and a dedicated chipbreaker like L55T helps evacuate chips reliably, lowering the risk of recutting and improving surface finish. Application focus and operational benefits Engineered for use in industrial milling, this insert supports productive machining strategies across general engineering and foundry applications. The P / K material designation confirms suitability for unalloyed and alloyed steels as well as a range of cast irons, enabling flexible tooling setups on milling machines that handle mixed batches. The insert’s construction promotes repeatable results and simplified process planning: consistent wear behaviour reduces the need for frequent parameter adjustments, while the combination of grade and chip control contributes to improved surface integrity and predictable tool life, which are key for cost‑effective batch manufacture. For clarification on application ranges or cutting parameters, Metav Werkzeuge can provide additional technical guidance. Contact Metav Werkzeuge for tailored advice on applying the Walter Tools LNHU130608R-L55T WKP35S milling insert in production environments — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: LNHU130608R-L55T-WKP35S-WALTER Product label: Fräswendeschneidplatte LNHU130608R-L55T WKP35S Walter Tools Manufacturer: Walter Tools Product type: Milling insert Core Data Corner radius: 0.8 Plate size: 13 Plate thickness: 06 Free rake angle: 0° (negativ) Tolerance class: H Special features Series: Tiger‑tec Silver Grade: WKP35S Chipbreaker: L55T Shape: Rectangular Material designation: P / K Suitable for machining: steel, cast iron Execution: U ISO designation: LNHU130608R-L55T WKP35S FAQ What materials is this insert suitable for? The LNHU130608R-L55T WKP35S insert from Walter Tools is specified for ISO material groups P and K, meaning it is suitable for machining various steel grades and cast iron. How does the L55T chipbreaker affect machining behaviour? The L55T chipbreaker is engineered to produce short, controllable chips when milling steel and cast iron; this improves chip evacuation and reduces the likelihood of recutting with the Walter Tools milling insert. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP35S grade increases thermal stability and wear resistance, supporting longer tool life and consistent surface quality under industrial milling conditions. Is the insert geometry suitable for interrupted cuts? Yes, the rectangular form combined with the 0.8 mm corner radius and 0° negative rake gives a robust cutting edge that withstands interrupted cutting and roughing operations when using the Walter Tools insert. Which production scenarios are best served by this insert? This insert is well suited to high‑volume or mixed‑batch milling where predictable tool life and reliable chip control are priorities; it supports efficient processing of steel and cast iron components. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not imply any affiliation between Metav Werkzeuge and the trademark owners. The offered article is an original, factory‑new product from the manufacturer.
LNHU130608R-L55T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the robust WPP35G grade for reliable steel machining and consistent tool life; the combination of a negative 0° clearance and the L55T chipbreaker ensures predictable chip control and stable machining results — order directly via Metav Werkzeuge or consult our advisors for application-specific cutting data LNHU130608R-L55T WPP35G — Milling indexable insert, Tiger·tec Gold, Walter Tools The LNHU130608R-L55T WPP35G is a rectangular milling indexable insert designed for productive machining of steel, combining a Tiger·tec Gold coating with a dedicated chipbreaker for controlled chips Tiger·tec Gold coating for extended tool life WPP35G grade optimised for steel machining Negative 0° clearance for stable engagement 0.8 mm corner radius for robust cutting edges Consistent performance and longer service life from Tiger·tec Gold The coated carbide composition of the Tiger·tec Gold series provides higher resistance to wear while maintaining edge stability in demanding operations. The chosen grade, WPP35G, is optimised for machining steel and balances wear resistance with toughness to reduce flank wear and edge chipping. In practice, this means the milling insert delivers predictable tool life and fewer unplanned tool changes, helping to keep cycle times steady and production throughput reliable. The L55T chipbreaker promotes effective chip formation, which reduces heat concentration at the cutting edge and supports consistent surface quality. Precision engagement and reliable chip control for industrial milling The insert’s negative 0° clearance gives a positive engagement behaviour in heavy feed and interrupted cuts, improving dimensional stability in roughing operations. The 0.8 mm corner radius increases edge strength and distributes cutting forces over a larger area, lowering the chance of premature edge failure when machining tougher steel grades. Thanks to the rectangular plate form and the dedicated L55T chipbreaker geometry, the insert maintains controlled chip flow even under elevated cutting forces, which simplifies chip evacuation and reduces the risk of built-up edge. Practical benefits for process security and ease of use As an indexable milling plate from Walter Tools’ Tiger·tec Gold range, this insert supports efficient, repeatable results across series production and batch jobs. The coated surface reduces friction and improves resistance to thermal and mechanical stresses, while the material adaptation for steel reduces the need for frequent optimisation of cutting parameters. For production engineers, this translates into fewer machine interruptions and easier process standardisation. If additional cutting data or parameter recommendations are required for specific steels or milling strategies, Metav Werkzeuge provides technical consultation and can assist with application-specific guidance. Contact Metav Werkzeuge for tailored cutting data and application advice on Walter Tools Tiger·tec Gold inserts, and arrange an expert consultation to optimise machining parameters for your steel applications Technical data SKU: LNHU130608R-L55T-WPP35G-WALTER Article designation: LNHU130608R-L55T WPP35G Manufacturer: Walter Tools Core specifications Plate size: 13 Plate thickness: 06 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: H Design & features Rectangular plate form Chipbreaker: L55T Series: Tiger·tec Gold Grade: WPP35G Application group: P (steel) Execution: U FAQ What materials is this insert suitable for? The LNHU130608R-L55T WPP35G insert is formulated for machining steel (ISO group P), with the Tiger·tec Gold coating and the WPP35G grade optimised for typical steel cutting conditions. How does the chipbreaker L55T affect machining? The L55T chipbreaker on this Walter Tools milling insert promotes controlled chip formation and evacuation, improving surface finish and reducing heat concentration on the cutting edge during steel machining. What does the negative 0° clearance mean for operation? A negative 0° clearance provides a stable cutting engagement, particularly advantageous in roughing or interrupted cuts, offering improved dimensional stability and resistance to edge damage. Can this insert be used for finishing operations? While the insert is primarily optimised for robust steel machining and roughing strategies, its combination of coating and corner radius can also deliver consistent surface quality in semi-finish applications depending on machining parameters. Is the Tiger·tec Gold coating suitable for high-speed cutting? The Tiger·tec Gold technology enhances wear resistance and thermal stability, supporting higher cutting speeds within the limits advised for steel machining; application-specific parameters should be verified with Metav Werkzeuge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory-new product of the manufacturer Walter Tools.
LNHU130608R-L55T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold performance, a robust 0° negative clearance and the WSM35G grade for secure machining of stainless steels and superalloys; order the insert directly via Metav Werkzeuge or ask our consultants for application-specific advice. LNHU130608R-L55T WSM35G Milling indexable insert, Tiger·tec Gold coated – for stainless steel & superalloys | Walter Tools A LNHU130608R-L55T WSM35G is a rectangular milling indexable insert engineered for machining rostfreie Stähle and heat‑resistant alloys, combining a Tiger·tec Gold coating with an L55T chipbreaker and a 0.8 mm corner radius. Tiger·tec Gold coating for increased tool life Optimised for stainless steels and superalloys Rectangular geometry with 0.8 mm nose radius 0° negative clearance for secure chip control Higher productivity when machining difficult materials The combination of the WSM35G grade and the Tiger·tec Gold coating delivers a reliable balance between toughness and wear resistance, specifically developed for machining rostfreie Stähle and heat‑resistant superalloys. The coated cemented carbide substrate supports stable cutting edges and reduces built‑up edge formation, which improves process stability under elevated cutting temperatures. The integrated L55T chipbreaker promotes predictable chip formation, so the machining process becomes more efficient and less prone to interruptions. In practical terms, this means fewer unscheduled tool changes and a steadier surface finish on demanding components. Secure geometry for repeatable, robust machining The insert’s rectangular form and 0° (negative) clearance are designed to provide mechanical stability and secure clamping in milling cutters. The 0.8 mm corner radius contributes to an increased edge strength that tolerates interrupted cuts and light engagement conditions, while the plate thickness code 06 supports durable mounting and vibration resistance. The combination of these geometric features reduces the risk of edge chipping and allows for consistent workpiece tolerances across serial production runs. Engineers benefit from clear, verifiable geometry that simplifies process setup and repeatability. Application-focused specification and handling guidance This indexable plate is intended for the targeted machining of rostfreie Stähle (ISO group M) and superalloys/titanium (ISO group S), where heat generation and material toughness require advanced grades and coatings. The WSM35G grade is a coated carbide tailored to maintain a stable cutting edge under thermally aggressive conditions. For best results, pair the insert with a suitably rigid milling cutter, select cutting parameters that limit excessive temperatures, and use the L55T chipbreaker geometry to manage chip flow. The result is predictable tool life and reproducible surface quality in industrial applications. For technical advice on integrating Walter Tools Tiger·tec Gold inserts into production, contact Metav Werkzeuge for tailored recommendations and delivery options – info@metav-werkzeuge.com · +49 2822 7131930 Technical Data Article number: LNHU130608R-L55T-WSM35G-WALTER Product type: Milling indexable insert Series: Tiger‑tec Gold Grade: WSM35G Chipbreaker: L55T Facts Corner radius: 0.8 mm Clearance angle: 0° (negative) Insert size: 13 Thickness code: 06 Tolerance class: H Special features Coating: Tiger·tec Gold Substrate: coated cemented carbide Shape: Rectangular Suitable for: rostfreie Stähle (M), superalloys / titanium (S) Manufacturer: Walter Tools FAQ What materials is this insert suited for? The LNHU130608R-L55T WSM35G insert is specified for rostfreie Stähle (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), using the WSM35G grade and Tiger·tec Gold coating to manage heat and maintain edge stability. How does the L55T chipbreaker affect performance? The L55T chipbreaker promotes controlled chip formation and evacuation, improving process stability for the coated carbide grade and helping to avoid built‑up edge during the machining of tough materials. What advantage does the 0° negative clearance provide? A 0° (negative) clearance enhances mechanical support at the cutting edge, reducing the tendency for edge deformation and chipping, which is particularly beneficial when machining demanding workpiece materials. Is this insert suitable for interrupted cuts and heavy engagement? Yes, the rectangular geometry combined with a 0.8 mm corner radius and the robust WSM35G grade provide enhanced edge strength and resistance to chipping under interrupted or high‑load conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
LNHU130608R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the L55T chipbreaker and a 0° negative rake, this insert offers stable cutting and reliable edge life for demanding milling tasks; order the LNHU130608R-L55T WSP45G directly via Metav Werkzeuge or consult their specialists for application support. LNHU130608R-L55T WSP45G milling indexable insert — Tiger·tec Gold, negative rake (0°) by Walter Tools A LNHU130608R-L55T WSP45G is a rectangular milling insert engineered for versatile use in interrupted and continuous milling of Stahl, rostfreier Stahl and heat‑resistant alloys. Tiger·tec Gold PVD coating Suitable for Stahl, rostfreier Stahl and superalloys Negative rake 0° for robust cutting Rectangular insert with 0.8 mm corner radius Consistent chip control and extended tool life The combination of the Tiger·tec Gold PVD system and the WSP45G carbide grade provides a balanced mix of wear resistance and toughness that supports longer tool life under typical milling loads. The L55T chipbreaker is designed to produce short, controllable chips for secure evacuation in both slotting and face milling. For end users this means fewer tool changes and reduced unproductive machine time; the coating reduces flank and crater wear while the chip control geometry helps prevent re-cutting of chips, which in turn improves surface quality and process stability. Broad material capability with predictable performance Designed for the ISO groups P, M and S, the insert is suitable for machining unalloyed and alloyed Stahl, rostfreier Stahl and heat‑resistant superalloys and titanium. The cutting geometry and grade of this insert address the specific challenges of each group: controlled heat management and stable edge for Stahl, improved anti-build‑up characteristics for rostfreier Stahl, and enhanced thermal resistance for S‑group materials. The 0.8 mm corner radius increases edge strength and helps absorb intermittent load peaks, making the insert a reliable choice where robustness and repeatability are required. Practical integration into tool programmes and production The ISO designation LNHU130608R-L55T WSP45G simplifies specification and reordering and supports straightforward integration into existing tool holders and tool lists. The negative rake (0°) geometry provides a robust cutting edge that performs well under higher feed rates and moderate depths of cut, helping to maintain dimensional stability and reduce the risk of premature edge breakdown. Tolerance class H and the rectangular plate form further support repeatable clamping and predictable performance in series production. When planning tool setups, consider the chipbreaker function and the insert geometry to match feed and depth settings for optimal productivity. Contact Metav Werkzeuge for tailored milling recommendations for Walter Tools Tiger·tec Gold inserts and for delivery or stock information. Technical data Article number: LNHU130608R-L55T-WSP45G-WALTER Designation: LNHU130608R-L55T WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Core specifications Size: 13 Corner radius: 0.8 mm Relief angle: 0° (negative) Thickness designation: 06 Tolerance class: H Special features Grade: WSP45G Chipbreaker: L55T Coating: Tiger·tec Gold (PVD) Applicable material groups: P / M / S Plate form: rectangular Execution: U FAQ Which materials can this insert machine? The insert is rated for the ISO material groups P, M and S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys/titanium using the LNHU130608R-L55T WSP45G milling insert from Walter Tools. What advantages does Tiger·tec Gold offer? Tiger·tec Gold is a PVD coating technology that enhances wear resistance and edge stability; on the WSP45G grade it supports consistent tool life and improved surface finish under varied milling conditions. How does the L55T chipbreaker affect machining? The L55T chipbreaker produces compact, controllable chips for secure evacuation; this reduces recutting and improves process stability when using the WSP45G insert in interrupted or continuous milling. Is the insert suited to heavy roughing operations? With a 0° negative rake and a 0.8 mm corner radius, the geometry of this insert provides robust cutting edges that tolerate heavier loads and intermittent cutting, making it appropriate for many roughing scenarios with suitable parameter adjustments. How to identify the correct insert for replacement? Refer to the ISO designation LNHU130608R-L55T WSP45G and the Walter Tools series details when matching inserts; these identifiers ensure the correct grade, chipbreaker and plate form are selected. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is a leading global manufacturer of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands beyond the sale of original, factory‑new products from the manufacturer.
LNHU130608R-L65T WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of a Tiger·tec Gold PVD grade, reliable chip control from the L65T breaker and broad material capability (P/M/S) for efficient, repeatable milling; order the insert directly via Metav Werkzeuge or consult the technical advisers for cutting data and application recommendations. LNHU130608R-L65T WSP45G – Milling insert (Tiger·tec Gold), for steel, stainless and superalloys | Walter Tools The LNHU130608R-L65T WSP45G is a rectangular milling insert engineered for high-productivity milling of steels, rostfreiem and heat-resistant alloys, combining a tough PVD coating with a stable geometry for demanding shop-floor operations. Tiger·tec Gold PVD coating for extended tool life Versatile for steel, stainless and superalloys L65T chipbreaker for stable chip control 0.8 mm corner radius with 0° negative rake Precision and performance for demanding milling The Tiger·tec Gold grade offers a balanced combination of wear resistance and edge stability that supports both finishing and more aggressive cutting strategies. Matched to the geometry of the plate, the PVD-coated cemented carbide provides consistent results when machining steel, stainless steels and heat-resistant superalloys, minimising downtime associated with edge deterioration. The rectangular form and robust substrate enable repeated indexing and predictable tool life, which in turn helps maintain cycle times and production throughput. Controlled chip evacuation and secure cutting edge The dedicated L65T chipbreaker ensures controlled chip formation across a wide range of feeds and depths, reducing recutting and improving surface integrity. Coupled with the 0° negative rake and a 0.8 mm corner radius, the insert stabilises the cutting edge under intermittent cuts and elevated temperatures typical for M and S group materials. This geometry translates technical advantages into operational benefits: fewer interruptions for tool changes and a more reliable surface finish on each workpiece. Application guidance and practical advantages Selected for versatility, the insert suits diverse milling operations where material mix and process stability are priorities. The combination of grade and breaker supports applications from medium-duty finishing to more productive semi-finishing passes, producing consistent chip control and repeatable dimensional outcomes. Integration into standard toolholders is straightforward thanks to the common ISO-style designation, making the insert a practical choice for workshops seeking a balance of productivity and process security. Contact Metav Werkzeuge for cutting data, tailored recommendations and order information for the Walter Tools LNHU130608R-L65T WSP45G milling insert Technical Data Article number: LNHU130608R-L65T-WSP45G-WALTER SKU: LNHU130608R-L65T-WSP45G-WALTER Product type: Fräswendeschneidplatte Designation: LNHU130608R-L65T WSP45G Brand: Walter Tools Facts Plate shape: Rectangle Plate size: 13 mm Corner radius: 0.8 mm Thickness code: 06 Free rake: 0° (negative) Tolerance class: H Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated cemented carbide) Chipbreaker: L65T Material suitability: P / M / S (steel, stainless steels, superalloys/titanium) Execution: U FAQ What materials can be machined with this insert? The LNHU130608R-L65T WSP45G insert is specified for P / M / S groups, meaning it is suitable for steel, stainless steels and heat-resistant superalloys including titanium. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold PVD coating on this Walter Tools grade improves wear resistance and edge life, enabling longer productive cutting intervals with stable surface quality. What cutting behaviour does the L65T chipbreaker provide? The L65T breaker promotes controlled chip formation across varying feeds, reducing the risk of built-up edge and facilitating consistent chip evacuation during milling. Is the negative rake suitable for tougher materials? The 0° negative rake combined with the 0.8 mm corner radius stabilises the cutting edge under thermal and mechanical load, which is advantageous when machining tougher or heat-resistant materials. Can this insert be used for both finishing and semi-finishing? Yes, the grade and geometry are designed to support a range of milling operations from finishing to productive semi-finishing, depending on the chosen cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU130608R-L85T WK10 Wendeplatten - Walter Tools
Take advantage of the combination of robust chip control, negative rake geometry and the proven WK10 carbide grade for consistent milling performance; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. LNHU130608R-L85T WK10 — milling indexable insert, rectangular, L85T chipbreaker, Walter Tools The LNHU130608R-L85T WK10 is a rectangular milling insert designed for industrial milling operations where reliable chip control and a robust cutting edge are required. Rectangular form for stable seat and repeatable indexing L85T chipbreaker for controlled chip formation 0° negative rake for strong cutting edge stability Corner radius 0.8 for reduced edge chipping Consistent chip control and productive cutting The insert’s defining element is the L85T chipbreaker, engineered to promote a predictable chip flow and reduce re-cutting of chips in interrupted or continuous milling passes. Combined with the WK10 uncoated carbide grade, this configuration supports stable chip formation and reliable tool life in suitable applications. The negative rake geometry with 0° clearance provides a robust cutting edge that resists mechanical shock, making the insert appropriate where edge strength is a priority. Material suitability should be checked against the manufacturer’s product matrix to ensure optimal results. Durable geometry that prioritises process reliability The rectangular form and the H tolerance class contribute to precise locating and repeatable setup in milling pockets or cutter bodies, which helps to reduce setup variability. The 0.8 corner radius decreases the likelihood of micro-chipping at the cutting edge while maintaining a good balance between strength and surface finish. These geometric features are aimed at operators and engineers seeking predictable performance and reduced scrap rates during serial production or batch machining. Clear identification and safe selection The ISO designation LNHU130608R-L85T WK10 and the series entry "Walter Schneidstoffsorte - Serie offen" ensure straightforward identification when selecting replacement inserts or compiling tool lists. As the insert is supplied in an uncoated carbide grade, process engineers should verify compatibility with the workpiece material before use. Appropriate cutting parameters and coolant strategy further influence tool life and surface quality; consult the product matrix or Metav Werkzeuge for precise parameter recommendations. For application advice and ordering of Walter Tools inserts such as the LNHU130608R-L85T WK10, contact Metav Werkzeuge for tailored consultation and availability at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: LNHU130608R-L85T-WK10-WALTER Name: LNHU130608R-L85T WK10 Type: Fräswendeschneidplatte Series: Walter Schneidstoffsorte - Serie offen Grade: WK10 Core specifications Plate size: 13 Corner radius: 0.8 Thickness: 06 Clearance angle: 0° (negative) Tolerance class: H Design & special features Chipbreaker: L85T Uncoated carbide Rectangular form ISO designation: LNHU130608R-L85T WK10 Execution: U FAQ What is the main purpose of the L85T chipbreaker? The L85T chipbreaker on the LNHU130608R-L85T WK10 is designed to produce controlled, manageable chips that reduce entanglement and improve process stability during milling. Which materials can this insert machine effectively? Material suitability for the LNHU130608R-L85T WK10 must be verified against the Walter product matrix; the insert is supplied in WK10 uncoated carbide, so compatibility depends on the specific workpiece material and cutting parameters. How does the 0° negative rake affect cutting performance? A 0° negative rake increases cutting-edge strength and resistance to impact, making the insert well suited to interrupted cuts or applications where edge robustness is essential. What does the tolerance class H signify for this insert? Tolerance class H indicates close manufacturing tolerances for dimensions and seating accuracy, which helps ensure repeatable positioning in cutter bodies and consistent machining results. Is the corner radius of 0.8 suitable for high-feed milling? A 0.8 corner radius provides a compromise between edge strength and surface finish; for high-feed operations, the radius helps reduce edge breakdown but process parameters should be adjusted accordingly. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU130608R-L85T WXN15 Wendeplatten - Walter Tools
Take advantage of the combination of a sharp, uncoated WXN15 cutting grade and the L85T chipbreaker for clean, efficient machining of non‑ferrous metals; order directly via Metav Werkzeuge or consult our specialists for cutting data and process recommendations. LNHU130608R-L85T WXN15 milling insert — uncoated carbide for non‑ferrous metals, Walter Tools The LNHU130608R-L85T WXN15 is an uncoated rectangular milling insert designed for sharp, high‑quality machining of non‑ferrous materials such as aluminium, copper and brass Uncoated carbide grade WXN15 Optimised L85T chipbreaker Rectangular 13 mm plate 0.8 mm corner radius Consistent, economical machining of non‑ferrous metals This indexable insert is built around the uncoated WXN15 cemented carbide grade and an L85T chipbreaker, a combination that supports predictable chip formation when working with non‑ferrous metals. The sharp, uncoated cutting edge reduces the risk of built‑up edge on aluminium and brass, improving surface quality and reducing secondary finishing. The geometry and the negative relief 0° provide a stable cutting action that is particularly effective for uninterrupted production runs, where repeatable performance translates directly into lower unit costs and less scrap. Stability and surface quality through controlled geometry The rectangular format and the 13 mm plate dimension, together with a 0.8 mm corner radius, deliver a balance between edge strength and fine surface finish. The moderate corner radius increases edge life under typical feed rates while maintaining the ability to produce smooth surfaces on soft metals. The tolerance class H ensures consistent seating and minimal runout in standard toolholders, so the machining result is reproducible from index to index. These features reduce set‑up time and help maintain a steady process window across batch production. Practical application guidance for reliable results The insert’s profile and sharp uncoated nature are particularly suited to applications where low cutting forces and clean chips are priorities, such as high‑feed finishing and medium‑depth milling in aluminium alloys, copper components and brass workpieces. The Walter N‑series base and the WXN15 grade are optimised for uncoated performance, providing reliable tool life in appropriately matched cutting conditions. For process optimisation, consider moderate cutting speeds and chip evacuation strategies suited to non‑ferrous materials; technical advice and cutting data are available to support integration into production. For tailored machining advice and to secure suitable Walter Tools inserts for upcoming production, contact Metav Werkzeuge — our consultants provide application support and cutting data to match the tool to the task. Technical Data Article number: LNHU130608R-L85T-WXN15-WALTER Designation: LNHU130608R-L85T Brand: Walter Tools Series: Walter N‑Sortensystem Facts Plate size: 13 mm Thickness code: 06 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: H Special features Grade: WXN15 (uncoated cemented carbide) Chipbreaker: L85T Plate form: Rectangular Execution: U Suitability: Non‑ferrous metals (aluminium, copper, brass) Sharp, uncoated geometry for reduced built‑up edge FAQ What materials is this insert suitable for? The insert is intended for non‑ferrous metals; the WXN15 grade is optimised for aluminium, copper and brass machining with the LNHU130608R-L85T WXN15. Is the cutting edge coated? No, the insert is uncoated; the uncoated cemented carbide ensures a very sharp edge suitable for non‑ferrous machining. What is the corner radius and why does it matter? The corner radius is 0.8 mm; this radius improves edge strength and surface finish while keeping cutting forces moderate. Which chipbreaker is used and what benefit does it provide? The L85T chipbreaker is designed to produce controlled chips in soft metals, aiding chip evacuation and maintaining surface integrity. Does the plate fit standard rectangular toolholders? Yes, the rectangular plate form and tolerance class H support consistent seating in compatible toolholders. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Walter Tools is a brand of the Walter AG group and part of the Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names are used for clarification only and indicate that the offered item is an original, factory‑new product of the manufacturer.
LNHU130612R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the proven WKP35G grade and Tiger‑tec Gold coating for extended cutting edge life and stable chip formation; combine that with the rectangular geometry and L55T chipbreaker for reliable machining of steel and cast iron — order directly via Metav Werkzeuge or ask the consultants for application-specific advice. LNHU130612R-L55T WKP35G Fräswendeschneidplatte — Tiger‑tec Gold, for steel and cast iron (Walter Tools) The LNHU130612R-L55T WKP35G is a rectangular milling indexable insert engineered for efficient removal of material in steel and cast iron applications, combining Walter Tools' Tiger‑tec Gold coating with a chipbreaker optimised for consistent chip control Tiger‑tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron Rectangular geometry with 1.2 mm corner radius 0° negative rake with L55T chipbreaker Extended life and wear resistance for demanding turning and milling The combination of Tiger‑tec Gold coating and the WKP35G coated-carbide grade delivers a measurable improvement in wear resistance and edge stability under typical steel and cast-iron cutting conditions. The coating technology reduces abrasive wear and heat-related edge degradation, which translates into longer intervals between indexings and fewer tool changes. Designed with ISO 513 workpiece groups in mind, this grade is adapted to the thermal loads and chip behaviour characteristic of steel (P) and cast iron (K). The result is predictable performance across a broad range of geometries and cutting speeds, supporting higher process reliability and lower overall tooling costs. Consistent chip control and surface quality through geometry The rectangular plate form and the L55T chipbreaker are matched to provide controlled chip formation and evacuation during interrupted and continuous cuts. A 0° negative rake contributes to a robust cutting edge that resists chipping under heavy engagement, while the 1.2 mm corner radius helps distribute cutting forces to improve surface finish and reduce notch wear. These geometric features support stable machining conditions, minimise secondary machining steps and aid in achieving repeatable dimensional results. For production environments where cycle time and component quality are both critical, this geometry offers a balance between cutting strength and finished-surface integrity. Productivity gains and process security for batch production Using this insert in the Tiger‑tec Gold series supports higher material removal rates and predictable tool life, which helps to shorten cycle times and increase throughput. The WKP35G grade and coating combination is designed to maintain a stable cutting edge, allowing for consistent feed and speed settings across multiple workpieces. That stability reduces setup variance and contributes to overall process security. Paired with the correct toolholder and machining parameters, the insert enables economical, repeatable machining in small to medium batches — a pragmatic choice for workshops seeking a robust, high‑performance solution from Walter Tools. For high-process reliability with the Tiger‑tec Gold WKP35G insert, contact Metav Werkzeuge to discuss optimal toolholder pairing and availability for the Walter Tools LNHU130612R-L55T insert Technical data SKU: LNHU130612R-L55T-WKP35G-WALTER Article designation: LNHU130612R-L55T WKP35G Label: Fräswendeschneidplatte LNHU130612R-L55T WKP35G Walter Tools Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Corner radius: 1.2 Free angle: 0° (negative) Plate size: 13 Plate thickness: 06 Geometry: Rectangle Execution: U Tolerance class: H Special features Coating: Tiger‑tec Gold Grade: WKP35G Chipbreaker: L55T Applicable materials: steel (P) and cast iron (K) Material code: P / K Wendeplatte ISO designation: LNHU130612R-L55T WKP35G FAQ What materials is this insert suitable for? The LNHU130612R-L55T WKP35G insert is specified for steel (P) and cast iron (K), reflecting the WKP35G grade and the Tiger‑tec Gold coating designed for these ISO workpiece groups. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold on this insert reduces abrasive wear and improves edge stability under thermal load, extending tool life and supporting consistent performance when machining steel and cast iron. What is the effect of the 0° negative rake on cutting performance? A 0° negative rake gives the insert a robust cutting edge that tolerates heavy engagement and intermittent cutting, increasing resistance to chipping and enhancing process security. Which chipbreaker is fitted and what advantage does it provide? The insert features the L55T chipbreaker, which is optimised for controlled chip formation and evacuation, helping to maintain surface quality and reduce the risk of chip-related interruptions. Are there recommended applications for the rectangular geometry and 1.2 corner radius? The rectangular form with a 1.2 corner radius is well suited to operations requiring strength at the cutting edge and improved surface finish, making it a solid choice for general milling tasks in steel and cast iron. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original factory-new goods of the manufacturer.
LNHU130612R-L55T WPP35G Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Gold coating and the WPP35G grade for reliable steel machining; the combination of a 0° negative rake and a 1.2 mm corner radius provides robust cutting performance and predictable tool life — order or request advice via Metav Werkzeuge for tailored application support. LNHU130612R-L55T WPP35G — Milling indexable insert by Walter Tools, Tiger·tec Gold, for steel A LNHU130612R-L55T WPP35G milling indexable insert designed for productive machining of steel using a Tiger·tec Gold coated, coated-carbide grade. Tiger·tec Gold coated for long tool life WPP35G grade optimised for steel machining 0° negative rake for stable cutting 1.2 mm corner radius for robust edge Improved process stability and wear resistance with Tiger·tec Gold The coated-carbine grade WPP35G, developed under the Tiger·tec Gold family, combines enhanced thermal resistance with optimised chip control for steel machining. The coating reduces flank wear and helps maintain a consistent cutting edge under the thermal and mechanical stresses typical of steel turning and milling. As a result, cycle times remain stable and tool-change intervals become more predictable, supporting continuous production runs. This paragraph explains how the coating supports higher cutting temperatures and improved surface quality while maintaining cutting-edge integrity. Geometry engineered for reliable metal removal and chip control The insert’s 0° negative rake and the dedicated L55T chipbreaker form a geometry that prioritises stability and controlled chip formation when machining steels. A neutral rake angle reduces the tendency for edge chipping under interrupted cuts and heavy engagement; the 1.2 mm corner radius increases edge strength for roughing and semi-finishing passes. These geometrical choices translate into fewer unexpected interruptions, better dimensional reproducibility and reduced rework — particularly valuable in mixed-batch or high-variation production environments. Practical compatibility and designation for workshop use This rectangular milling indexable insert carries the designation series and size markers that align with standard cutter bodies: size 13, thickness 06, execution U and tolerance class H. It is explicitly specified for machining steel (P) and therefore matches applications ranging from unalloyed to alloyed steel grades where balanced toughness and wear resistance are required. The clear series and grade labelling simplifies tool selection and inventory management, enabling straightforward replacement and comparability across jobs and machines. Contact Metav Werkzeuge to discuss application parameters, availability and recommendations for integrating this Walter Tools Tiger·tec Gold insert into existing tooling systems Technical data Article number: LNHU130612R-L55T-WPP35G-WALTER Designation: LNHU130612R-L55T WPP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Numeric data Corner radius: 1.2 mm Free angle: 0° (negative) Plate size: 13 Plate thickness: 06 Tolerance class: H Materials & features Coating: Tiger·tec Gold Chipbreaker: L55T Shape: Rectangle Execution: U Suitable for: Steel (P) Product type: Milling indexable insert (Fräswendeschneidplatte) FAQ What materials is this insert intended for? The LNHU130612R-L55T WPP35G from Walter Tools is specified for machining steel (designation P), covering unalloyed and alloyed steel applications. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WPP35G grade increases thermal resistance and improves wear behaviour, which leads to longer periods of consistent cutting performance in steel machining. Why choose a 0° negative rake for this insert? A 0° negative rake provides a stable cutting geometry that reduces edge breakage under heavy or interrupted cuts, improving process reliability and repeatability. Is the L55T chipbreaker suitable for roughing and semi-finishing? Yes, the L55T chipbreaker is designed to control chips in steel machining and supports both roughing and semi-finishing passes with effective chip evacuation. What designation details should be checked when ordering replacements? Match the designation LNHU130612R-L55T WPP35G, the series Tiger·tec Gold and the size/thickness markers (size 13, thickness 06) to ensure compatibility with existing cutter bodies. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU130612R-L55T WSM35G WSM35G Wendeplatten - Walter Tools
Combining the Tiger‑tec Gold coating with the L55T chipbreaker and a 1.2 mm corner radius yields a milling insert optimised for secure chip control and extended edge life when machining stainless steels and heat‑resistant superalloys; order directly via Metav Werkzeuge or request application advice from our specialists. LNHU130612R-L55T WSM35G milling insert — Tiger‑tec Gold, for stainless steels and superalloys (Walter Tools) LNHU130612R-L55T WSM35G is a rectangular milling insert designed for demanding applications on stainless steels and heat‑resistant superalloys, combining a coated carbide grade with a specialised chipbreaker for improved process stability Tiger‑tec Gold coating for extended life Optimised L55T chipbreaker for stable chips 0° negative rake for secure cutting edge 1.2 mm corner radius for consistent finish Reliable edge life for demanding materials The Tiger‑tec Gold coating, a coated carbide grade, is engineered to resist built‑up edge and thermal stress when cutting tough materials. With the integrated L55T chipbreaker, the insert supports reliable chip formation and evacuation, reducing the risk of edge failure and unplanned downtime. The combination of coating and geometry leads to a consistent tool life and contributes to predictable cycle times in series production. Geometry tuned for process security and surface quality Featuring a 0° negative rake and a 1.2 mm corner radius, this rectangular insert stabilises the cutting edge under heavy loads and provides a robust flank for interrupted cuts. The negative rake increases edge strength for roughing passes while the modest corner radius helps maintain a good surface finish, making the insert suitable for operations where both durability and final part quality matter. The L55T chipbreaker further ensures short, controllable chips for automated machining. Application range and machining advantages This insert is intended primarily for machining stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), where material toughness and heat generation demand specialised grades and geometries. The coated carbide grade offers improved wear resistance and cutting‑edge stability, which translates into higher productivity and lower tooling costs per component. The LNHU130612R-L55T WSM35G performs well in both roughing and semi‑finishing operations when matched to appropriate cutting parameters. Contact Metav Werkzeuge for tailored selection advice on Walter Tools inserts and to arrange application‑specific recommendations or a quotation Technical Data Article number: LNHU130612R-L55T-WSM35G-WALTER SKU: LNHU130612R-L55T-WSM35G-WALTER Manufacturer: Walter Tools Product type: Milling insert Facts Geometry: rectangular Size: 13 Thickness code: 06 Corner radius: 1.2 mm Negative rake: 0° (negative) Chipbreaker: L55T Tolerance class: H Special features Series: Tiger‑tec Gold Grade: WSM35G (coated carbide) Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) Execution: U Insert designation: LNHU130612R-L55T WSM35G Robust chip control and edge stability FAQ What materials is this insert suitable for? This insert is suited for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S) as stated for the WSM35G grade. How does the Tiger‑tec Gold series improve performance? The Tiger‑tec Gold coating on the insert enhances wear resistance and heat tolerance, contributing to stable cutting edges and longer tool life in demanding machining conditions. What does the L55T chipbreaker do? The L55T chipbreaker creates short, controlled chips and supports efficient evacuation, improving process reliability and reducing the risk of built‑up edge. Is this insert suitable for roughing and finishing? Yes; the combination of a 0° negative rake and a 1.2 mm corner radius allows the insert to perform in both roughing and semi‑finishing applications when set with appropriate cutting parameters. What is the insert designation to order? Order using the designation LNHU130612R-L55T WSM35G (Walter Tools) to ensure the correct grade and geometry. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and brand names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, brand‑new goods from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com