LDMT170408R-D57 WSP45G WSP45G Wendeplatten - Walter Tools
Combine the PVD‑coated Tiger·tec Gold grade WSP45G with the D57 chipbreaker and a 0.8 mm corner radius to secure consistent chip control and extended tool life in mixed-production environments; order directly via Metav Werkzeuge or consult their specialists for cutting data and application support. LDMT170408R‑D57 WSP45G Fräswendeschneidplatte – Tiger·tec Gold, rectangular insert, Walter Tools A LDMT170408R‑D57 WSP45G indexable milling insert engineered for reliable finishing and roughing operations in steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold PVD-coated WSP45G Versatile for steel, stainless and superalloys Rectangular insert with 0.8 mm corner radius 15° relief angle for stable cutting Increased throughput with Tiger·tec Gold performance The Tiger·tec Gold design of this indexable insert combines a PVD‑coated carbide grade and a geometry optimised for continuous chip flow to boost cycle times and tool life. The WSP45G grade was developed for demanding milling where heat and built‑up edge are concerns; the coating supports a stable cutting edge under elevated temperatures, resulting in fewer interruptions for tool change. In practical terms, the robust grade and chipformer reduce flank wear and improve process repeatability, turning material removal tasks into a more predictable production step. Broad material capability for mixed‑run production This insert is suitable for the ISO groups P, M and S, so it handles unalloyed and alloyed steel, stainless steel and high‑temperature superalloys or titanium with effective chip control. For shops running mixed batches, one grade that covers multiple material classes reduces tool inventory and changeovers. The combination of substrate and PVD coating promotes secure chip formation in tough, heat‑prone alloys while maintaining edge stability in normal structural steels, which supports consistent surface finish and dimensional accuracy across different workpieces. Geometry that stabilises the cut and extends edge life The insert’s geometry—15° relief angle and 0.8 mm corner radius—is tuned for stability and durability during interrupted and continuous cuts. A rectangular form with a thickness corresponding to the “04” series provides a stiff seat in the cutter body, reducing vibration and promoting consistent contact conditions. The D57 chipbreaker shapes chips for controllable evacuation, lowering the risk of recutting and thermal spikes at the cutting edge. These combined features help maintain a sharper edge over longer tool life, reducing downtime and improving overall process economy. Practical selection for production reliability Choosing the right insert involves matching grade, geometry and chipbreaker to the machining task. The LDMT170408R‑D57 design brings a balance of toughness and coating wear resistance that pays off in serial production and in challenging one‑off jobs alike. The tolerance class M supports consistent repeatability across insert lots, enabling reliable programme transfer between machines. For operations seeking fewer tool changes and predictable component quality, this insert is a pragmatic choice that emphasises process security and machining efficiency. For tailored advice on Walter Tools inserts such as the LDMT170408R‑D57 WSP45G and to ensure optimal productivity, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data SKU: LDMT170408R-D57-WSP45G-WALTER Label: Fräswendeschneidplatte LDMT170408R-D57 WSP45G Walter Tools Manufacturer: Walter Tools Measurements / Core data Relief angle: 15° Corner radius: 0.8 mm Insert size: 17 mm Thickness: 4 mm (series 04) Tolerance class: M Design / Special features Rectangular insert form Chipbreaker: D57 Grade/Series: WSP45G, Tiger·tec Gold Material capability: steel, stainless steel, superalloys (ISO P / M / S) FAQ What materials is this insert suitable for? The LDMT170408R‑D57 WSP45G is formulated for ISO groups P, M and S, covering steel, stainless steel and heat‑resistant superalloys. How does the D57 chipbreaker improve machining? The D57 chipbreaker on this insert promotes controlled chip formation and evacuation, reducing recutting and improving surface integrity for more consistent results. What advantages does the Tiger·tec Gold grade offer in milling? Tiger·tec Gold provides a PVD‑based coating system and a carbide substrate designed for heat resistance and stable edge behaviour, which together extend tool life in mixed and high‑temperature applications. Is the geometry suitable for interrupted cuts? Yes; the combination of a 15° relief angle, rigid rectangular form and 0.8 mm corner radius supports stability during interrupted and roughing cuts. How does tolerance class M affect production? Tolerance class M ensures reproducible insert dimensions between lots, supporting accurate programme transfer and minimising adjustment work when changing cutters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Mention of brand names such as Walter Tools is for identification and explanation only; there is no affiliation or endorsement implied. The offered item is an original, factory‑new product from the named manufacturer.
LDMT170408R-F57 WKP25S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WKP25S grade for consistent tool life and productive chip control; the rectangular design with a 0.8 mm radius and 15° relief angle reduces downtime and improves surface quality. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. LDMT170408R-F57 WKP25S milling indexable insert – Tiger·tec Silver, 15° relief | Walter Tools The LDMT170408R-F57 WKP25S is a rectangular milling insert engineered for productive machining of steel and cast iron in general milling applications. Tiger·tec Silver coating for high wear resistance Optimised chipbreaker F57 for controlled chips Suitable for steel and cast iron machining Rectangular insert with 0.8 mm nose radius Productivity gains through a coated, grade-optimised design The combination of the Tiger·tec Silver technology and the WKP25S grade is aimed at stable cutting conditions when machining steel and cast iron. The coated carbide substrate reduces flank wear and extends cutting edge life, which translates into fewer tool changes and longer uninterrupted production cycles. As a result, process reliability improves and total throughput can increase without altering existing machine parameters. Reliable chip control for safer machining and better surface finish Equipped with the F57 chipbreaker and a 0.8 mm nose radius, the insert promotes predictable chip formation and evacuation during slotting and light shoulder milling. Controlled chips reduce the risk of recutting and tool breakage, leading to a more consistent surface quality and less manual cleaning at the machine. The rectangular geometry contributes to cycle stability and simplifies indexable insert handling during replacement. Consistent edge life and dimensional stability under industrial loads The 15° relief angle and the M tolerance class ensure a robust cutting edge that withstands variable cutting forces. Coating and grade choices deliver a balance between abrasion resistance and toughness, offering repeatable performance across batch production. The insert geometry supports repeatable clamping and predictable wear progression, which aids in planning tool-change intervals and reduces unexpected stoppages. Seamless integration into production workflows This insert is compatible with standard rectangular milling cutter bodies designed for the LDMT form factor. The simple geometry and familiar identification (LDMT170408R-F57 WKP25S) ease tool selection and inventory management. For manufacturing environments aiming to maintain a high level of productivity with reduced process variation, the insert represents an economical route to stable performance and improved component quality. For reliable milling performance with Tiger·tec Silver and WKP25S grade, contact Metav Werkzeuge for expert application support and fast supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LDMT170408R-F57-WKP25S-WALTER Designation: LDMT170408R-F57 WKP25S Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 17 mm Plate thickness: 04 Tolerance class: M Special features Grade: WKP25S Chipbreaker: F57 Material grade: P / K (steel and cast iron) Plate form: Rectangular Execution: T FAQ What materials is this insert suitable for? The LDMT170408R-F57 WKP25S insert is designed for machining steel and cast iron (material groups P and K) thanks to the WKP25S grade and the Tiger·tec Silver technology. What does the F57 chipbreaker provide? The F57 chipbreaker on the insert improves chip control and evacuation, which helps to maintain a consistent surface finish and reduces the risk of recutting during milling. How does the Tiger·tec Silver series benefit production? Tiger·tec Silver offers enhanced wear resistance and a balance of toughness, supporting longer tool life and repeatable cutting performance in industrial milling operations. What are the key dimensional features to consider? Note the 15° relief angle, 0.8 mm corner radius and the rectangular plate form; these dimensions influence chip flow, corner strength and compatibility with cutter bodies. Is this insert compatible with standard LDMT milling cutters? Yes, the LDMT170408R-F57 WKP25S conforms to the LDMT form factor and is intended for use in standard rectangular milling cutter bodies that accept this insert style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LDMT170408R-F57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, reliable chip control and material versatility for consistent, productive milling results; order directly via Metav Werkzeuge or contact our consultants for application advice. LDMT170408R-F57 WKP35G indexable milling insert — Tiger‑tec Gold, 15° relief (Walter Tools) LDMT170408R-F57 WKP35G is an indexable milling insert designed for productive machining of steel and cast iron, offering a rectangular form and precision geometry for stable cutting. Tiger‑tec Gold coating for wear resistance Optimised F57 chipbreaker for controlled chips Suitable for steel (P) and cast iron (K) machining 15° relief angle and 0.8 mm corner radius Improved productivity through reliable coating and geometry The Tiger‑tec Gold grade WKP35G is a coated carbide designed to extend tool life and maintain a stable cutting edge under typical steel and cast‑iron conditions. The combination of a wear‑resistant coating and the insert’s geometry reduces flank wear and leads to longer intervals between indexing. For workshop environments where reproducible performance matters, this plate contributes directly to higher part counts per tool set and lower downtime for regrinding or replacement. The F57 chipbreaker supports predictable chip formation, which simplifies chip evacuation and reduces the risk of collisions or surface damage. Precise chip control and surface quality for predictable results A well‑matched chipbreaker and relief angle translate into consistent chip flow and surface finish. The rectangular form and 15° relief ensure a secure cutting engagement and stable forces during transverse milling passes, while the 0.8 mm corner radius balances edge strength with the ability to produce acceptable surface roughness. These features help to avoid chatter and secure repeatable dimensions on production runs, making the insert suitable for both roughing and semi‑finishing tasks where economical material removal and consistent tolerances are priorities. Application versatility: steel and cast iron explained This insert is specified for ISO material groups P (steel) and K (cast iron). In practice, that means the grade and chip management are tuned for the thermal and abrasive conditions encountered when machining unalloyed and alloyed steels, as well as typical cast‑iron alloys. The coated carbide chemistry of WKP35G is selected to resist abrasive wear from graphite in cast iron and to tolerate the heat spikes encountered when cutting steels, delivering a balanced performance across a broad range of workpiece materials. Practical benefits for workshop use and tool management Using this indexable plate helps standardise tooling across different operations by offering a versatile geometry and a durable coating. The rectangular shape simplifies inventory decisions for modular cutter bodies, and the defined tolerance class ensures interchangeability without time‑consuming adjustments. When paired with a suitable cutter body and clamping system, the insert reduces process variability and supports predictable cycle times—advantages that contribute directly to lower unit costs and higher throughput in production environments. Contact Metav Werkzeuge today for tailored advice on integrating the Tiger‑tec Gold WKP35G insert into current tool holders and process plans; Metav Werkzeuge can recommend cutting data and compatible assemblies to optimise performance and tool life. Technical data SKU: LDMT170408R-F57-WKP35G-WALTER Product: Indexable milling insert Brand: Walter Tools Grade: WKP35G Series: Tiger‑tec Gold Dimensions & measurable data Relief angle: 15° Corner radius: 0.8 mm Plate size: 17 mm Plate thickness: 4 mm Tolerance class: M Design & special features Coating: Tiger‑tec Gold coated carbide Chipbreaker: F57 Plate form: Rectangular Material groups: P (steel), K (cast iron) Execution: T FAQ What materials is this insert suitable for? The LDMT170408R‑F57 WKP35G insert from Walter Tools is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger‑tec Gold coating benefit tool life? The Tiger‑tec Gold coating on the WKP35G grade improves wear resistance and maintains edge stability under thermal and abrasive loads, extending tool life in demanding steel and cast‑iron applications. What is the purpose of the F57 chipbreaker? The F57 chipbreaker is engineered to produce predictable chip shapes and to support safe chip evacuation, which reduces the risk of built‑up edge and improves surface quality during milling. Can this insert be used for finishing operations? With a 0.8 mm corner radius and stable geometry, the insert is suitable for semi‑finishing and certain finishing passes when the process parameters are adjusted for surface quality and tolerance requirements. Which cutter bodies are compatible with this insert? Compatibility depends on the cutter body pocket and clamping design; the LDMT170408R‑F57 WKP35G is intended for cutter systems that accept rectangular indexable plates with the LDMT‑style footprint and the corresponding clamping method. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names are mentioned only for product identification and explanation. There is no affiliation between our company and the trademark owners; the offered article is an original, brand‑new product from the manufacturer.
LDMT170408R-F57 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Gold coating, reliable chip control via the F57 breaker and a compact rectangular geometry for consistent milling of steels. Order the LDMT170408R-F57 WPP35G insert directly via Metav Werkzeuge or ask our consultants if needed. LDMT170408R-F57 WPP35G – Rectangular milling insert with Tiger‑tec Gold, 15° relief The LDMT170408R-F57 WPP35G is a rectangular milling insert engineered for demanding steel machining applications, combining Walter Tools' Tiger‑tec Gold coating with a defined 15° relief and an F57 chipbreaker for dependable metal removal. Tiger‑tec Gold coating for extended tool life Optimised for steel machining (ISO P) Rectangular insert, 0.8 mm corner radius F57 chipbreaker for reliable chip control Longer tool life and predictable machining quality The coated carbide grade WPP35G, part of the Tiger‑tec Gold series, is formulated to resist abrasive wear while retaining edge stability under the high temperatures typical for steel cutting. This results in longer tool life and fewer insert changes, which directly improves uptime and reduces handling-related downtime. The combination of coating technology and a 0.8 mm corner radius provides a balance between strength at the cutting edge and controlled cutting forces, so feeds and speeds remain steady over extended cycles. The 15° relief angle supports positive cutting geometry, helping to reduce cutting forces and improving surface consistency on steel workpieces. Reliable chip formation and process security for steel work The F57 chipbreaker is tuned to the insert geometry and intended material group, promoting short, controllable chips when milling steels. Predictable chip behaviour reduces the risk of surface damage and tool interference, enabling safer higher-feed passes and stable batch production. Rectangular form inserts provide a robust clamping seat and multiple usable edges, which increases the cost-efficiency per insert in repetitive tasks. The product’s design supports efficient swarf evacuation and steady cutting conditions, contributing to consistent surface finishes and repeatable component quality. Practical selection and application guidance for workshop planners When specifying an insert for a milling operation on steels, prioritise substrate and coating combination, chipbreaker style and edge geometry to match the intended operation — roughing or finishing. The LDMT170408R-F57 WPP35G insert is particularly suitable for steel machining in general-purpose operations where a compromise between wear resistance and toughness is required. For fixture and holder pairing, choose a compatible rectangular toolholder that secures the insert reliably to make full use of the insert’s multiple cutting edges. For further process optimisation, consult machining data sheets or contact technical advisors for recommended feeds and speeds for specific steel grades. Contact Metav Werkzeuge for personalised application advice on the LDMT170408R-F57 WPP35G insert and to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LDMT170408R-F57-WPP35G-WALTER Designation: LDMT170408R-F57 WPP35G Product type: Fräswendeschneidplatte (milling insert) Brand: Walter Tools Core specifications Relief angle: 15° Corner radius: 0.8 mm Insert shape: Rectangular Insert size: 17 Thickness: 04 Special features and applications Coating: Tiger‑tec Gold (coated carbide) Grade: WPP35G Chipbreaker: F57 Series: Tiger‑tec Gold Material application: Steel (ISO P) Tolerance class: M FAQ What materials is this insert intended for? The LDMT170408R-F57 WPP35G insert is formulated for machining steels and is classified for ISO P applications, offering a good balance between wear resistance and toughness. How does the Tiger‑tec Gold coating benefit performance? The Tiger‑tec Gold coating on the WPP35G grade increases wear resistance and thermal stability, resulting in longer tool life and more consistent cutting performance during steel milling. What does the F57 chipbreaker provide in operation? The F57 chipbreaker promotes controlled, short chips and improved swarf management, which supports higher feeds and safer, more stable milling cycles. Is the insert suitable for finishing as well as roughing? With a 0.8 mm corner radius and the WPP35G grade, the insert is versatile for general-purpose milling; it can be used for both roughing and semi-finishing depending on cutting parameters and workpiece requirements. How many cutting edges are available per insert? The rectangular geometry provides multiple usable edges; actual edge count depends on indexing strategy and insert orientation in the toolholder. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
LDMT170408R-F57 WSM35G Tiger-tec Gold Wendeplatten - Walter Tools
Benefit from the combination of robust edge stability, targeted chip control and the Tiger·tec Gold coating for dependable performance in demanding milling operations; order the LDMT170408R-F57 WSM35G milling insert directly via Metav Werkzeuge or consult our specialists for optimal tool selection. LDMT170408R-F57 WSM35G milling indexable insert by Walter Tools — 15° relief, 0.8 mm nose radius The LDMT170408R-F57 WSM35G is a rectangular milling insert engineered for productive machining of stainless steel and heat‑resistant superalloys in industrial milling applications. *Tiger·tec Gold coating for high temperature stability *Optimised F57 chipbreaker for reliable chip control *15° relief and 0.8 mm nose radius for stable cuts Higher productivity on tough alloys through advanced coating and grade The combination of the Tiger·tec Gold coating and the WSM35G grade yields improved resistance to thermal and abrasive wear, which translates into longer tool life and fewer interruptions in production. Designed for materials in groups S and M, the carbide composition supports stable chip formation even when machining stainless steel or heat‑resistant superalloys. For shops facing mixed batches of difficult materials, this translates into fewer insert changes and more predictable cycle times, helping maintain throughput and part quality. Geometry that improves surface finish and tool reliability A modest 0.8 mm nose radius and a 15° relief angle provide a balance between cutting edge strength and dimensional accuracy. The rectangular 17 mm format offers stable support in milling cutters, reducing vibration and improving repeatability. The F57 chipbreaker is configured to guide swarf away from the cutting zone, which decreases the risk of built‑up edge and helps preserve the cutting edge for longer. The result is consistent surface quality with fewer rework cycles and a reliable process window for semi‑roughing to finishing passes. Process security and predictable economics for series production With a tolerance class of M and the Walter Tools manufacturing standards behind it, the insert supports reproducible performance across machining batches. The combination of grade, coating and chipbreaker promotes secure cutting behaviour under thermal load, reducing unexpected tool failures. For production environments this means lower downtime, simpler tool inventory management and better overall machining economy. The insert’s execution code T and rectangular form allow integration into standard tool holder systems for rapid changeover during scheduled servicing. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and to arrange supply of LDMT170408R-F57 WSM35G — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: LDMT170408R-F57-WSM35G-WALTER Article: Fräswendeschneidplatte LDMT170408R-F57 WSM35G Manufacturer: Walter Tools Measured data Relief angle: 15° Nose radius: 0.8 mm Plate size: 17 Plate thickness: 04 Tolerance class: M Plate form: Rectangle Materials / Special features Grade: WSM35G Series: Tiger-tec Gold Chipbreaker: F57 Execution: T Material groups: S / M Applicable material (flag): stainless steel: yes FAQ What materials is this insert suited for? The LDMT170408R-F57 WSM35G insert is designed for machining materials in groups S and M, in particular heat‑resistant superalloys, titanium and stainless steel. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on the WSM35G grade improves thermal stability and wear resistance, which extends tool life and increases process security in continuous milling operations. Which chip control can be expected from the F57 geometry? The F57 chipbreaker channels swarf reliably away from the cutting edge, supporting secure chip formation and reducing the risk of built‑up edge during milling. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LDMT170408R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, precise F57 chip control and a compact 0.8 mm corner radius for reliable finishing and semi‑finishing operations on steel, stainless steel and heat‑resistant alloys; order directly via Metav Werkzeuge or consult our technical team for application-specific recommendations. LDMT170408R-F57 WSP45G — Indexable milling insert (Tiger‑tec Gold) by Walter Tools The LDMT170408R-F57 WSP45G is an indexable milling insert engineered for versatile finishing and semi‑finishing of steels, stainless steels and superalloys, combining PVD coating technology with stable chip control. Tiger·tec Gold PVD coating Versatile for P / M / S materials F57 chipbreaker for controlled chips 15° clearance angle for secure cutting Consistent performance across demanding materials The Tiger‑tec Gold coating and the WSP45G grade deliver a balance of wear resistance and edge toughness that is particularly effective when machining a broad range of workpiece groups, specified here as P / M / S. In practical terms, this means predictable tool life when machining unalloyed and alloyed steel, tougher rostfreier Stahl (stainless steel) and heat‑resistant alloys or titanium where cutting temperatures and edge loads are high. The coating is a PVD type that supports stable cutting-edge behaviour and reduces the tendency for built‑up edge, translating technical specification into fewer stoppages and more consistent component quality. Precision edge geometry for superior surface finishes The rectangular plate form with a 0.8 mm corner radius and a 15° free angle provides a combination of strength and accessible cutting geometry that suits finishing passes and light semi‑finishing. The F57 chipbreaker is tuned to produce short, controllable chips under typical milling conditions, reducing recutting and improving surface condition. With tolerance class M, the insert maintains repeatable geometry for predictable positioning in standard toolholders; this supports finishing tolerances and contributes to stable cycle times in batch production. The relatively small corner radius aids in achieving tight corner radii and fine surface quality while preserving edge security. Productivity benefits and application scenarios Designed for general milling tasks where a balance of economy and performance is required, this insert supports operations such as shoulder milling, light face milling and profile finishing. The LDMT170408R-F57 WSP45G grade is particularly suited to shops aiming to standardise on one PVD‑coated solution for mixed batches of steel, rostfreier Stahl and high‑temperature alloys, reducing tool changes and simplifying inventory. Combined with appropriate cutting data and clamping, the insert helps sustain productivity with consistent part quality and predictable insert life, delivering measurable gains in throughput and process reliability. Contact Metav Werkzeuge for tailored application advice and to place an order for Walter Tools Tiger‑tec Gold inserts, ensuring the right insert geometry and grade for each machining task Technical data Article number: LDMT170408R-F57-WSP45G-WALTER Product name: Fräswendeschneidplatte LDMT170408R-F57 WSP45G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Dimensions & core values Plate size: 17 mm Corner radius: 0.8 mm Clearance angle: 15° Plate thickness code: 04 Tolerance class: M Special features Grade: WSP45G Chipbreaker: F57 Coating: Tiger‑tec Gold (PVD) Applicable workpiece groups: P / M / S Plate form: Rectangular Execution code: T FAQ What workpiece materials can this insert machine effectively? The LDMT170408R-F57 WSP45G insert is specified for the ISO workpiece groups P, M and S, meaning it is suitable for various steels, rostfreier Stahl (stainless steels) and heat‑resistant superalloys or titanium‑based materials. How does the F57 chipbreaker affect machining? The F57 chipbreaker on this insert promotes controlled chip formation and effective evacuation during milling, supporting improved surface finishes and reduced risk of chip recutting in finishing operations. What does the 0.8 mm corner radius mean for surface quality? A 0.8 mm corner radius provides a compromise between edge strength and finish quality: it helps produce fine surface results while retaining sufficient edge robustness for light to medium finishing cuts. Is the coating suitable for high‑temperature applications? The Tiger‑tec Gold PVD coating enhances wear resistance and edge stability under elevated cutting temperatures, making the grade appropriate for demanding milling tasks within its specified material groups. Which toolholders are compatible with the LDMT170408R-F57 geometry? The rectangular LDMT geometry is compatible with standard indexable milling toolholders designed for LDMT inserts; toolholder selection should ensure correct seating and clamping to maintain tolerance class M positioning. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanation only and do not imply any affiliation with or endorsement by the trademark holders. The described article is an original, factory‑new product of the manufacturer Walter Tools.
LDMT170412R-D51 WKP35G Wendeplatten - Walter Tools
Benefit from the combination of economical performance, Tiger‑tec Gold coating and optimised chip control for a stable production process; order the LDMT170412R‑D51 WKP35G directly via Metav Werkzeuge or ask our consultants if needed. LDMT170412R-D51 WKP35G indexable milling insert — Tiger‑tec Gold coated, for steel and cast iron | Walter Tools The LDMT170412R‑D51 WKP35G is an indexable milling insert engineered for reliable machining of steel and cast iron, offering a 15° clearance angle and a 1.2 mm corner radius for consistent edge performance. Tiger‑tec Gold coating for extended tool life Optimised chip control with D51 breaker 15° clearance and 1.2 mm corner radius Increase throughput with proven coating technology The combination of the Tiger‑tec Gold series and the WKP35G grade delivers a measurable rise in tool life and process security. The coated cemented‑carbide composition is designed to withstand the typical heat and abrasion encountered when turning and milling steel, while the coating technology reduces flank wear and improves resistance to built‑up edge. As a result, cycle times remain consistent and tool change intervals can be planned more economically, supporting higher machine uptime and predictable production rates. Reliable chip formation and broad material coverage Equipped with the D51 chipbreaker, the insert provides stable chip control across interrupted cuts and varied feed rates. The grade is specified for the ISO material groups P (steel) and K (cast iron), meaning the geometry and coating are balanced for both ductile and abrasive conditions. This deliberate match of chip geometry and coating reduces rework and improves surface integrity, so workpieces achieve the required dimensional quality with fewer passes and less manual intervention. Geometry engineered for stability and repeatability The rectangular form, 15° clearance and 1.2 mm corner radius contribute to cutting-edge stability and predictable wear patterns. The plate size of 17 and thickness code 04 are compatible with standard toolholders designed for this family of inserts, while the tolerance class M ensures tight dimensional consistency between indexings. Together these factors reduce vibration, enable secure clamping and support repeatable finish quality across series production — important where batch consistency is critical. Contact Metav Werkzeuge for application advice on Walter Tools inserts and to request a tailored recommendation based on machining conditions; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: LDMT170412R-D51-WKP35G-WALTER Name: Fräswendeschneidplatte LDMT170412R-D51 WKP35G Manufacturer: Walter Tools Facts Clearance angle: 15° Corner radius: 1.2 mm Plate size: 17 Plate thickness: 04 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WKP35G (coated cemented carbide) Chipbreaker: D51 Shape: Rectangular Suitable materials: steel (P), cast iron (K) FAQ What materials is the LDMT170412R‑D51 WKP35G suitable for? The LDMT170412R‑D51 WKP35G is specified for ISO groups P (steel) and K (cast iron), offering balanced performance for both ductile and abrasive materials. How does the Tiger‑tec Gold coating benefit machining? The Tiger‑tec Gold coating on the WKP35G grade enhances wear resistance and reduces flank wear, which extends tool life and helps maintain surface quality over long production runs. What role does the D51 chipbreaker play in cutting performance? The D51 chipbreaker is designed to produce controllable chip shapes in varying feeds and interrupted cuts, improving evacuation and reducing the risk of recutting and surface damage. Is the insert compatible with standard rectangular toolholders? The rectangular geometry and size code 17 align with common toolholder families; the tolerance class M supports accurate indexing and secure clamping in standard mounts. What cutting edge geometry supports process stability? The combination of the 15° clearance angle and a 1.2 mm corner radius provides stable engagement, dampens vibration and yields repeatable edge life under typical milling conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product designations are mentioned for explanatory purposes only and do not imply any affiliation with our company. The offered item is an original, factory‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik Group and is referenced here for identification purposes.
LDMT170412R-D51 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, a reliable D51 chipbreaker and a compact rectangular geometry for consistent milling performance; order the LDMT170412R‑D51 WSP45G directly via Metav Werkzeuge or request application advice from our consultants. LDMT170412R‑D51 WSP45G rectangular milling insert, 15° clearance — Walter Tools The LDMT170412R‑D51 WSP45G is a rectangular milling insert designed for versatile milling of Stahl, rostfreier Stahl and heat‑resistant alloys, optimised for secure chip control and long tool life Tiger‑tec Gold PVD coating for extended tool life Optimised D51 chipbreaker for reliable chip control 15° clearance angle for stable cutting performance Rectangular form with 1.2 mm corner radius Consistent performance through advanced coating and chip control The combination of the Tiger‑tec Gold coating and the WSP45G grade delivers a durable cutting edge that reduces flank wear and improves process reliability. The engineered D51 chipbreaker ensures predictable chip formation even under interrupted or heavy milling, which helps to avoid build‑up on the cutting edge and minimises unplanned tool changes. For production environments this means more stable cycle times and reduced tool consumption, supporting higher throughput without compromising surface quality. Wide material capability for fewer tool variants Rated for the material groups P / M / S, this insert is suitable for machining a broad spectrum of workpiece materials: Stahl (P), rostfreier Stahl (M) and heat‑resistant superalloys and Titan (S). The WSP45G PVD grade is formulated to handle the thermal and mechanical demands of these groups, providing secure chip formation on sticky stainless grades and enhanced edge stability when cutting high‑temperature alloys. Using one insert across multiple materials reduces inventory complexity and simplifies tool selection at the machine. Geometry engineered for rigidity and precise edge control The rectangular plate with a 15° clearance angle and a 1.2 mm corner radius offers a balance between edge strength and the ability to produce clean transitions in shoulder and slot milling. The compact plate dimensions support rigid clamping and minimise vibration, which improves surface finish and repeatability. The tolerance class M signals consistent manufacturing accuracy, ensuring interchangeability and predictable tool‑holding behaviour in standard cutter bodies. Designed for productivity and predictable costs As part of the Tiger‑tec Gold series, this insert focuses on process security and long tool life, translating into fewer interventions at the machine and lower overall cutting costs. The coated Hartmetall grade and the D51 chipformer contribute to stable cutting forces and consistent part quality in series production. If further process data or cutting parameters are required, the Metav Werkzeuge team is available to provide application‑oriented recommendations and technical data to support integration into existing machining strategies. E‑mail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Request tailored application advice from Metav Werkzeuge for genuine Walter Tools Tiger‑tec Gold inserts and ensure optimal machining results on Stahl and rostfreier Stahl Technical data Article number: LDMT170412R‑D51‑WSP45G‑WALTER SKU: LDMT170412R‑D51‑WSP45G‑WALTER Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Tiger‑tec Gold Facts Size: 17 Thickness: 04 Clearance angle: 15° Corner radius: 1.2 mm Tolerance class: M Chipbreaker: D51 Special features Grade: WSP45G Coating technology: Tiger‑tec Gold (PVD) Applicable material groups: P / M / S Form: Rectangular Execution: T FAQ What materials can be machined with this insert? The LDMT170412R‑D51 WSP45G milling insert from Walter Tools is suitable for Stahl, rostfreier Stahl and heat‑resistant alloys classified under P / M / S. How does the D51 chipbreaker affect performance? The D51 chipformer on the Walter Tools insert promotes controlled chip formation and reduces the risk of built‑up edge, improving process stability in milling operations. Is this insert compatible with standard rectangular cutter bodies? Yes, the LDMT170412R‑D51 WSP45G is designed for standard rectangular insert seats; ensure the cutter body accepts the plate dimensions specified. What advantage does the Tiger‑tec Gold coating provide? Tiger‑tec Gold coating enhances wear resistance and thermal stability, extending tool life and supporting consistent surface quality over longer tool campaigns. Which tolerance class is specified and why does it matter? The insert is produced to tolerance class M, ensuring dimensional consistency and reliable fitment in precision milling assemblies. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LDMW08T204R-A57 WKP25S Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver coating and the WKP25S grade delivers consistent tool life and reliable chip formation in mixed production runs; combined with the A57 chipbreaker and the 15° relief geometry this insert supports productive machining of steel and cast iron. Order the LDMW08T204R-A57 WKP25S directly via Metav Werkzeuge or ask our consultants if needed. LDMW08T204R-A57 WKP25S milling indexable insert — Tiger·tec Silver, rectangular format — Walter Tools The LDMW08T204R-A57 WKP25S is a rectangular milling insert engineered for high-process security in the productive machining of steel and cast iron, providing stable cutting performance across varied part geometries. Tiger·tec Silver coating for high process security WKP25S grade for steel and cast iron machining 15° relief angle and 0.4 mm corner radius Rectangular 08 format with A57 chipbreaker Reliable performance for uninterrupted production The insert combines a coated carbide substrate with the Tiger·tec Silver technology to ensure a balance between wear resistance and edge stability. This design reduces unplanned downtime by offering predictable tool life under typical milling forces, which in turn supports consistent cycle times. The focus on geometric stability means fewer edge failures in medium-duty to heavy interrupted cuts, delivering measurable gains in shop-floor reliability. Efficient chip control and improved surface finish Equipped with the A57 chipbreaker, the cutting geometry is optimised for controlled chip formation, reducing the risk of long stringy chips and improving evacuation in peripheral and face milling operations. The result is an improved surface quality and reduced rework. For workshops transitioning between castings and forged parts, the insert’s chip control helps maintain process consistency and simplifies coolant and chip-management strategies. Broad material compatibility with clear standards The WKP25S grade is tuned for ISO groups P (steel) and K (cast iron), meaning the chemistry and coating are selected to handle the heat generation typical of steel machining and the abrasive wear common with iron. For users less familiar with ISO groupings: P indicates suitability for unalloyed and alloyed steels; K denotes cast irons. This makes the insert a versatile choice for mixed production environments where both material families occur. Geometry and handling that save setup time With a 15° relief and a 0.4 mm corner radius in a rectangular 08 format, the insert provides a balance between edge strength and dimensional control. The standard tolerance class M simplifies toolholder selection and replacement workflows. Handling benefits include predictable mounting behaviour in standard rectangular pockets and compatibility with holders that accept the LDMW08T204R-A57 geometry, which helps to speed changeovers and maintain accurate tool offsets. Choose Tiger·tec Silver quality from Walter Tools — contact Metav Werkzeuge for application advice and stock information Technical data SKU: LDMW08T204R-A57-WKP25S-WALTER Article: LDMW08T204R-A57 WKP25S Manufacturer: Walter Tools Product type: Milling indexable insert Series: Tiger·tec Silver Core dimensions and data Relief angle: 15° Corner radius: 0.4 mm Size: 08 Thickness: T2 Tolerance class: M Materials and special features Grade: WKP25S Coating technology: Tiger·tec Silver Chipbreaker: A57 Shape: Rectangular Suitable for: Steel (P) and Cast iron (K) Execution: W FAQ What materials is this insert suitable for? The LDMW08T204R-A57 WKP25S from Walter Tools is designed for machining steel (ISO P) and cast iron (ISO K), offering a good compromise between heat resistance for steels and abrasion resistance for castings. How does the Tiger·tec Silver coating benefit production? The Tiger·tec Silver coating on this milling insert increases wear resistance and edge stability, which leads to longer tool life and more consistent cycle times in medium to high cutting conditions. Which chipbreaker is fitted and what is its effect? The insert uses the A57 chipbreaker, engineered to produce short, controllable chips in face and peripheral milling, improving chip evacuation and resulting surface quality. What are the key geometric features to consider for holder selection? Important dimensions include the rectangular 08 format, relief angle of 15° and corner radius of 0.4 mm; the tolerance class M aids reproducible seating in compatible toolholders. Is this insert suitable for interrupted cuts or heavy machining? Yes — the combination of WKP25S grade and the coated carbide substrate provides edge strength and wear resistance that perform well in interrupted and tougher milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LDMW08T204R-A57 WKP35G W - Wendeplatten - Walter Tools
Combine long tool life with reliable chip control and process stability thanks to the Tiger‑tec Gold grade WKP35G and chipbreaker A57; this results in consistent productivity and fewer tool changes. Order the LDMW08T204R-A57 WKP35G milling insert directly via Metav Werkzeuge or consult the technical team for application support. LDMW08T204R-A57 WKP35G — Milling indexable insert, Tiger‑tec Gold, chipbreaker A57 — Walter Tools A LDMW08T204R-A57 WKP35G milling indexable insert engineered for efficient machining of steel and cast iron in finishing and light roughing tasks. Tiger‑tec Gold coating for long tool life Grade WKP35G for steel and cast iron Chipbreaker A57 ensures controlled chips 15° relief with 0.4 mm corner radius Reliable performance across steel and cast iron The insert is based on the Tiger‑tec Gold technology and the WKP35G grade, a coated carbide designed for stable wear behaviour when machining steel (ISO group P) and cast iron (ISO group K). The coating and substrate combination reduces flank wear and extends in‑service life, which improves productivity by lowering frequency of tool changeovers. For users unfamiliar with coating technology: the coating provides thermal protection and a low‑friction surface, while the carbide core maintains edge strength under load. These characteristics deliver predictable performance in series production and support consistent component quality. Controlled chips and improved surface finish The built‑in chipbreaker A57 is dedicated to producing short, controllable chips and aiding evacuation in slotting and side‑milling operations. Combined with the 15° relief geometry and 0.4 mm corner radius, the insert smooths engagement forces and helps achieve a repeatable surface finish. The relief angle reduces rubbing at the cutting edge, so heat generation is lowered and edge life is preserved. The modest corner radius balances edge robustness with the ability to maintain fine surface quality on typical finishing passes. Easy integration and stable process results Designed in a rectangular form with size 08 and thickness T2, the insert fits common Walter toolholders for modular milling systems and enables quick index changes. The tolerance class M supports repeatable clamping accuracy, which is essential for maintaining dimensional stability across batches. In production terms, this combination reduces setup variation and contributes to predictable cycle times. For shops seeking to optimise throughput, the grade and geometry prioritise process stability and repeatable results, making the insert a solid choice for mixed production of steel and cast iron components. For extended tool life and proven chip control, opt for the Walter Tools Tiger‑tec Gold WKP35G insert — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: LDMW08T204R-A57-WKP35G-WALTER Label: Fräswendeschneidplatte LDMW08T204R-A57 WKP35G Walter Tools Product type: Fräswendeschneidplatte ISO designation: LDMW08T204R-A57 WKP35G Short designation: LDMW08T204R-A57 Grade: WKP35G Manufacturer: Walter Tools Core specifications Relief angle: 15° Corner radius: 0.4 mm Size: 08 Thickness: T2 Tolerance class: M Special features Series: Tiger‑tec Gold Chipbreaker: A57 Shape: Rectangular Execution: W Material suitability: steel (P), cast iron (K) Material designation: P / K FAQ Which materials is this insert suitable for? The LDMW08T204R-A57 WKP35G insert is engineered for steel (ISO group P) and cast iron (ISO group K), reflecting the WKP35G grade’s focus on abrasive wear resistance and reliable chip formation. What machining tasks is the insert best suited to? The insert is intended for finishing and light roughing operations where controlled chips and consistent surface quality are required; the geometry and chipbreaker A57 support these application types. How does the Tiger‑tec Gold grade affect productivity? The Tiger‑tec Gold technology improves thermal resistance and edge stability, which leads to longer tool life and more consistent results over production runs, reducing downtime for insert changes. Manufacturer /Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a registered trademark of its respective owner. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
LDMW14T308R-A57 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold wear resistance, precise geometry and reliable chip control for consistently productive milling of Stahl and Gusseisen; order directly via Metav Werkzeuge or request tailored application advice from our consultants. LDMW14T308R-A57 WKP35G rectangular milling insert — Walter Tools, Tiger·tec Gold, for Stahl & Gusseisen The LDMW14T308R-A57 WKP35G is a rectangular milling indexable insert designed for productive machining of Stahl and Gusseisen, combining a wear-resistant coating with a geometry optimised for stable chip formation. Tiger·tec Gold coating for high wear resistance Optimised for Stahl and Gusseisen machining 15° relief angle with 0.8 mm corner radius Rectangular insert LDMW14T308R-A57, thickness T3 Durable coating for extended cutting performance The combination of the Tiger·tec Gold series and the WKP35G grade provides a coated carbide body that significantly improves wear resistance and process stability. This coating technology is engineered to reduce flank wear and maintain a stable cutting edge at elevated cutting temperatures, which translates into longer tool life and fewer insert changes. For production environments where uninterrupted throughput matters, the improved abrasion resistance helps sustain component tolerances and reduces downtime caused by premature insert wear. Geometry engineered for reliable chip control and surface quality With a 15° relief angle and a 0.8 mm corner radius, the insert offers an effective balance between cutting edge strength and smooth chip flow. The integrated chipbreaker A57 is tuned to promote predictable chip segmentation when machining Stahl and Gusseisen, lowering the risk of built-up edge and improving surface finish. The rectangular geometry and T3 thickness ensure secure clamping in standard milling cutter bodies, delivering consistent radial and axial stability during interrupted cuts or heavier engagement conditions. Broad applicability across ISO material groups for process flexibility The grade is supplied for ISO groups P and K, which means the insert is intended for machining materials categorised as P (Stahl) and K (Gusseisen). The welding and microstructure of the WKP35G sort are optimised to handle the heat generation and chip behaviour typical of those material families, providing versatility across common production tasks. The insert’s tolerance class M and plate size 14 ensure interchangeability in many modular tool systems, simplifying tool inventory and enabling faster setup times across different machining centres. Practical benefits and economical production flow Using this indexable design reduces the operational complexity of regrinding and lengthy resharpening cycles: when the cutting edge is spent, a quick index or replacement restores original geometry. The combination of Tiger·tec Gold wear protection and the grade’s robustness supports higher cutting parameter windows, which can improve productivity while controlling unit costs. Clear identification of the insert geometry and chipbreaker facilitates predictable process planning and eases tool management in high-mix or batch production environments. Contact Metav Werkzeuge for application-specific recommendations and availability of Walter Tools LDMW14T308R-A57 WKP35G inserts; expert advice and order processing are provided by Metav Werkzeuge. Technical data SKU: LDMW14T308R-A57-WKP35G-WALTER Name: LDMW14T308R-A57 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Relief angle: 15° Corner radius: 0.8 mm Plate size: 14 Thickness: T3 Tolerance class: M Special features Grade: WKP35G Coating/technology: Tiger·tec Gold Chipbreaker: A57 Shape: rectangular Application groups: Stahl (P), Gusseisen (K) Execution: W FAQ What materials can be machined with this insert? The LDMW14T308R-A57 WKP35G insert from Walter Tools is suitable for machining materials in ISO groups P and K — specifically Stahl and Gusseisen. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WKP35G grade reduces abrasive wear and increases thermal stability, extending service life and improving consistency under higher cutting speeds. How does the chipbreaker A57 affect machining? The chipbreaker A57 promotes controlled chip breakage when cutting Stahl and Gusseisen, improving swarf evacuation and surface finish while lowering the likelihood of built-up edge. Is the insert compatible with standard milling tool bodies? The rectangular shape, plate size 14 and T3 thickness, together with tolerance class M, make the insert compatible with many standard milling cutter systems that accept LDMW-style indexable plates. What cutting conditions suit this insert best? The combination of a coated carbide grade and the geometry of the insert is intended for productive general-purpose milling of Stahl and Gusseisen, with the option to increase cutting parameters where process security allows. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and do not imply any affiliation between our company and the mentioned manufacturers. The offered item is original, factory-new merchandise of Walter Tools.
LDMW170408R-A57 WKP35G Wendeplatten - Walter Tools
High-performance Tiger‑tec Gold grade and the WKP35G coating deliver reliable chip control and extended tool life, while the 15° relief and 0.8 mm corner radius ensure stable cutting in steel and cast iron; order the milling indexable insert via Metav Werkzeuge or consult our specialists for application support. LDMW170408R-A57 WKP35G milling indexable insert — Tiger‑tec Gold, for steel and cast iron | Walter Tools A LDMW170408R-A57 WKP35G milling insert engineered for efficient machining of steel (P) and cast iron (K) with a robust chipbreaker geometry and consistent dimensional tolerance. Tiger‑tec Gold coated WKP35G grade For steel and cast iron machining 15° relief angle, 0.8 mm corner radius Rectangular 17 mm insert with A57 chipbreaker Maximise material removal with a coated grade optimised for steels and cast iron The Tiger‑tec Gold WKP35G grade is a coated carbide formulation developed for stable performance when cutting both steel (P) and cast iron (K). The multilayer coating reduces wear from abrasive cast materials and moderates heat buildup when machining steels, resulting in longer edge life and fewer insert changes. The integrated A57 chipbreaker promotes predictable chip formation, which improves surface quality and reduces the risk of built-up edge during interrupted cuts. This combination supports higher feed rates and consistent cycle times across batch and single‑piece production. Precision geometry for consistent surface finish and process security A relief angle of 15° combined with a 0.8 mm corner radius provides a balance between strength and finishing capability: the edge resists chipping under moderate depths of cut while still producing a controlled surface texture. The insert’s rectangular shape and size designation (17) enable stable clamping in compatible cutter bodies, and the tolerance class M ensures repeatable seating and concentricity in multi‑insert tools. For production planners, these characteristics translate into predictable tool life, reduced rework and higher first‑pass yield. Practical integration: handling, inventory and selection guidance The LDMW designation and chipbreaker code simplify stock keeping and cutter selection: the plate thickness code (04) and execution W identify the mounting profile and seat requirements for compatible milling heads. Because the grade is optimised for a broad range of steels and cast irons, one insert family can cover diverse workpieces, reducing the need for multiple specialised items. For shops shifting between finishing and medium roughing, this insert offers a pragmatic compromise: adequate edge robustness for moderate cuts and the geometry to sustain acceptable surface quality, lowering tooling complexity on the shop floor. Discuss integrating the Tiger‑tec Gold WKP35G insert with Metav Werkzeuge for tailored cutting data and ordering; Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 for specification advice Technical data SKU: LDMW170408R-A57-WKP35G-WALTER Article designation: LDMW170408R-A57 WKP35G Type: milling indexable insert Series: Tiger‑tec Gold Manufacturer: Walter Tools Core data Relief angle: 15° Corner radius: 0.8 mm Insert size: 17 mm Thickness code: 04 Tolerance class: M Design and applications Rectangular insert shape Chipbreaker: A57 Grade: WKP35G (coated carbide) Suitable for: Steel (P) and cast iron (K) Execution: W FAQ What materials is this insert suited for? The LDMW170408R-A57 WKP35G insert is designed for machining steel (P) and cast iron (K), utilising the Tiger‑tec Gold coating to manage heat and abrasive wear. What does the A57 chipbreaker do? The A57 chipbreaker on the insert controls chip shape and evacuation, improving surface finish and reducing the risk of chip entanglement in both finishing and medium cutting operations. How does the 0.8 mm corner radius affect cutting? A 0.8 mm corner radius provides improved edge strength for interrupted cuts and contributes to a consistent surface texture, offering a compromise between durability and finish quality. Is this insert compatible with standard cutter bodies? The LDMW designation and size 17 indicate compatibility with cutter systems that accept rectangular inserts of this form and thickness; always check the cutter body’s seat and clamping specifications against the insert’s code. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered article is original, factory‑new merchandise of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LNGX130708R-L55 WKK25G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating, the WKK25G grade and the L55 chipbreaker delivers reliable wear resistance and predictable chip formation for cast iron machining; order the insert directly via Metav Werkzeuge or contact the technical team for application advice. LNGX130708R-L55 WKK25G – Milling indexable insert, Tiger·tec Gold grade for cast iron (Walter Tools) LNGX130708R-L55 WKK25G is a rectangular milling indexable insert engineered for productive machining of cast iron, featuring a Tiger·tec Gold coating and a neutral 0° negative rake for robust cutting performance Tiger·tec Gold coating for enhanced wear resistance Optimised for cast iron machining (ISO group K) Negative 0° rake for stable cutting conditions Rectangular insert with 0.8 mm corner radius Extended wear life and consistent edge performance The combination of the Tiger·tec Gold coating and the WKK25G carbide grade is designed to resist the abrasive wear typical of cast iron applications. This coating-system pairing reduces flank and crater wear under high abrasive loads, which results in more predictable tool life and fewer unscheduled tool changes. For production environments where repeatability matters, the improved wear resistance translates directly into steady component quality and reduced process variation. Geometry that stabilises heavy cuts and intermittent milling The insert’s negative 0° rake and rectangular form factor provide enhanced mechanical support at the cutting edge, making the geometry well suited to interrupted cuts and heavy engagement. The 0.8 mm corner radius increases edge strength and helps prevent premature chipping, while the robust body supports consistent seating in the toolholder. Together, these features help maintain surface finish and dimensional stability during demanding milling operations. Controlled chips and reliable process security Equipped with the L55 chipbreaker, the insert manages the short, brittle chips typical of cast iron, promoting reliable chip evacuation and reducing the risk of re-cutting. The tool’s tolerance class G ensures repeatable indexing and seating accuracy, which simplifies tool changes and keeps cycle times steady. Integrating this insert into a workflow supports higher process security and helps maintain throughput across batch production. For application-specific cutting data, machined-surface targets or to discuss suitable toolholder pairings for the Tiger·tec Gold WKK25G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical consultation and supply options Technical data SKU: LNGX130708R-L55-WKK25G-WALTER Label: Fräswendeschneidplatte LNGX130708R-L55 WKK25G Walter Tools Manufacturer: Walter Tools Facts Insert size: 13 mm Thickness: 7.0 mm Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: G Special features Coating: Tiger·tec Gold Grade: WKK25G Chipbreaker: L55 Shape: Rectangular Material application: cast iron (ISO group K) Series: Tiger·tec Gold Execution: X FAQ Which materials is this insert intended for? This insert is optimised for machining cast iron (ISO group K); the WKK25G grade and Tiger·tec Gold system are tuned for abrasive grey and nodular cast irons. What advantages does the Tiger·tec Gold coating bring? The Tiger·tec Gold coating on the WKK25G grade improves resistance against abrasive wear and thermal softening, extending effective cutting life under the short-chip conditions typical of cast iron. How does the negative 0° rake affect cutting behaviour? A negative 0° rake contributes to a stronger cutting edge and greater mechanical stability, which benefits interrupted cuts and heavy material engagement by reducing edge deflection and chipping. What chip control can be expected with the L55 chipbreaker? The L55 chipbreaker shapes and fractures short chips reliably for cast iron, aiding evacuation and lowering the risk of chip build-up that can affect surface quality. Does the insert offer consistent positioning and repeatability? Yes. The tolerance class G and standardised geometry provide reliable seating and repeatable indexing, supporting consistent part quality across multiple insert changes. Protected trademarks and trade names are the property of their respective owners and are mentioned here for descriptive purposes only. There is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
LNGX130708R-L55 WKP25S Wendeplatten - Walter Tools
Benefit from a combination of Tiger‑tec Silver coating and the WKP25S grade for reliable wear resistance and consistent chip control in steel and cast‑iron milling. Order the insert directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. LNGX130708R-L55 WKP25S — Rectangular milling insert, Tiger‑tec Silver grade, for steel & cast iron | Walter Tools LNGX130708R-L55 WKP25S is a coated indexable milling insert designed for robust performance in general milling of steel and cast iron components. Tiger‑tec Silver coating for long tool life Suitable for steel (P) and cast iron (K) Rectangular 13 mm insert, R0.8 corner L55 chipbreaker for stable chip control Predictable performance thanks to the Tiger‑tec Silver grade The WKP25S grade, developed within the Tiger‑tec Silver family, is a coated carbide variant optimised for the thermal and mechanical demands of steel and cast‑iron machining. The coating improves wear resistance and reduces flank and crater wear under cyclic loads, so cutting edges retain their geometry longer. In practical terms, this means fewer indexings and more consistent cycle times in production runs. The design is aimed at workshops and production facilities seeking a balance between cost efficiency and repeatable component quality. Geometry and chip control that stabilise machining processes The rectangular form with a corner radius R0.8 mm and the dedicated L55 chipbreaker deliver controlled chip formation and evacuation. The insert’s 0° (negative) rake setting promotes a robust cutting edge that is less prone to chipping under interrupted cuts or heavy engagement, making it suitable for moderate roughing and general‑purpose face milling where edge stability is critical. The combination of profile and chipbreaker reduces vibration and supports a predictable surface finish, thereby improving downstream processes like assembly or heat treatment. Production integration and process reliability for series machining Designed with a tolerance class G, this insert ensures repeatable seating and alignment in compatible indexable toolholders. The rectangular insert form and standardised dimensions facilitate quick replacement and minimise machine downtime. As a Walter Tools product from the Tiger‑tec Silver series, the insert is intended for industrial environments that prioritise process security and consistent output. For specific cutting data and holder compatibility, technical guidance is recommended to match speeds, feeds and depth of cut to the chosen workpiece and machining strategy. For tailored recommendations on integrating Walter Tools Tiger‑tec Silver inserts into production workflows, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss geometry, tooling and availability. Technical data SKU: LNGX130708R-L55-WKP25S-WALTER Article: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Material: P / K Chipbreaker: L55 Shape: Rectangular Free angle: 0° (negative) Tolerance class: G Execution: X Core measurements Size: 13 mm Thickness: 0.7 mm Corner radius: R0.8 mm Free angle: 0° (negative) Special features Coating: Tiger‑tec Silver Grade type: Coated carbide Suitable for: Steel (P), Cast iron (K) Chip control: L55 chipbreaker Series designation: Tiger‑tec Silver Label: LNGX130708R-L55 WKP25S FAQ Which materials is this insert designed for? The LNGX130708R-L55 WKP25S insert from Walter Tools is designed for machining steel (P) and cast iron (K), with the coating and grade tuned to handle the typical heat and chip characteristics of those groups. What does the WKP25S grade indicate? WKP25S denotes a Walter Tools coated‑carbide grade within the Tiger‑tec Silver technology, developed for high wear resistance and stable cutting-edge performance in steel and cast‑iron applications. How does the L55 chipbreaker affect machining? The L55 chipbreaker promotes short, controlled chips and reliable evacuation, which reduces the risk of built‑up edge and improves surface finish and process stability during continuous milling operations. What is the significance of the 0° (negative) free angle? A 0° (negative) free angle provides a robust cutting geometry that supports interrupted cuts and heavier engagements by strengthening the edge, which is beneficial for roughing and heavy milling passes. Is this insert suitable for high‑speed milling? The Tiger‑tec Silver coating and the WKP25S grade offer improved wear resistance; suitability for high‑speed milling depends on the specific machine, holder and cutting parameters, so performance should be validated with the chosen setup. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer.
LNGX130708R-L55 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance from the Tiger‑tec Gold coating and the WKP35G grade for consistent productivity when machining steel and cast iron; the L55 chipbreaker and 0° negative rake ensure controlled chip formation and stable cutting. Order the insert directly from Metav Werkzeuge or consult their application specialists for process matching. LNGX130708R-L55 WKP35G milling insert — rectangular, Tiger‑tec Gold, 0° negative — Walter Tools The LNGX130708R-L55 WKP35G is a rectangular milling insert engineered for productive machining of steel and cast iron, combining a coated‑carbide grade with a dedicated chipbreaker and a compact corner radius. Tiger‑tec Gold coated for wear resistance L55 chipbreaker for controlled chip formation Rectangular insert with 0° negative rake Suited for ISO P (steel) and ISO K (cast iron) Consistent process reliability through advanced coating and grade The combination of Tiger‑tec Gold technology and the WKP35G grade provides pronounced wear resistance and thermal stability under typical steel and cast‑iron cutting conditions. This coating stack is designed to reduce flank and crater wear, which translates into longer tool life and fewer insert changes. For production environments, that means higher uptime and a predictable tool‑change rhythm, supporting stable cycle times and repeatable component quality. Optimised chip control and surface results from the L55 geometry The L55 chipbreaker is engineered to produce short, controllable chips across a range of feed and depth settings, improving evacuation in both slotting and shoulder milling. Combined with the 0.8 mm corner radius, the geometry helps achieve a balance between edge strength and surface finish: the radius supports edge robustness while the chipbreaker reduces the risk of built‑up edge on cast parts. The result is a reliable surface quality with reduced rework and a lowered risk of workpiece damage. Geometry and mounting benefits for robust machining The rectangular shape with a 0° negative rake gives the insert mechanical stability and a consistent cutting edge orientation that suits interrupted cuts and heavy engagement. The compact plate thickness and precise tolerance class G ensure repeatable seating in standard toolholders, which contributes to steady tool performance and simplified inventory management. The insert’s form factor supports productive milling strategies where rigidity and repeatability are decisive. Application scope and material compatibility Designed for ISO groups P (steel) and K (cast iron), the grade and coating combination is tuned for the thermal loads and abrasive wear typical of these materials. The wrapped technical concept focuses on adaptable performance for a wide range of steels and grey or ductile cast irons, making the insert a versatile choice in mixed‑workshop environments where quick toolchange decisions and broad material coverage are required. The construction supports both finishing and medium‑duty roughing tasks when paired with appropriate cutting data. For reliable, productive milling with Walter Tools quality, specify the LNGX130708R-L55 WKP35G with Tiger‑tec Gold — contact Metav Werkzeuge for application advice, availability and to discuss the best tooling combination via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: LNGX130708R-L55-WKP35G-WALTER Name / ISO designation: LNGX130708R-L55 WKP35G Manufacturer: Walter Tools Product type: Milling insert (rectangular) Core technical data Plate size: 13 Plate thickness: 07 Corner radius: 0.8 mm Rake angle: 0° negative Chipbreaker: L55 Tolerance class: G Series: Tiger‑tec Gold Special features Grade: WKP35G (coated carbide) Coating technology: Tiger‑tec Gold Material suitability: ISO P (steel), ISO K (cast iron) Plate shape: rectangular Application focus: controlled chip formation, stable edge life FAQ What materials is this insert suitable for? The LNGX130708R-L55 WKP35G milling insert from Walter Tools is designed for machining ISO P (steel) and ISO K (cast iron), with the grade and coating optimised for those material groups. How does the L55 chipbreaker affect performance? The L55 chipbreaker on this insert promotes short, controllable chips that ease evacuation and reduce the likelihood of chip accumulation, improving process stability and surface finish in milling operations. What does the 0° negative rake mean for cutting? A 0° negative rake provides a mechanically robust cutting edge, better suited to interrupted cuts and higher engagement depths; the geometry helps maintain tool life under heavy loads. Which benefits does the Tiger‑tec Gold series deliver? Tiger‑tec Gold coating increases thermal resistance and wear protection, resulting in longer edge life and more predictable performance across a variety of steels and cast irons. What is the corner radius and how does it influence results? The corner radius of 0.8 mm offers a compromise between edge strength and surface quality, protecting the cutting edge while enabling good finishing characteristics. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools belongs to the Walter AG group, a leading manufacturer of precision tools for metalworking, known for high process security, precise machining and reliable tool life. Protected trademarks and trade names remain the property of their respective owners and are cited here for explanation only. There is no affiliation between our company and the named brands; the offered item is an original, brand‑new product from the manufacturer.
LNGX130708R-L55 WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from high wear resistance and precise chip control thanks to the Tiger‑tec Gold coated WPP35G grade combined with the L55 chipbreaker and a 0° negative rake; this configuration boosts productivity and process stability in steel machining. Order the Fräswendeschneidplatte LNGX130708R-L55 WPP35G directly via Metav Werkzeuge or ask our consultants if needed. Milling insert LNGX130708R-L55 WPP35G by Walter Tools — Tiger‑tec Gold coated for steel machining The LNGX130708R-L55 WPP35G is a rectangular milling insert engineered for robust steel machining, combining a Tiger‑tec Gold coated carbide grade with a controlled‑chip L55 geometry for consistent performance. Tiger‑tec Gold coated carbide for wear resistance L55 chipbreaker for stable chip control Rectangular form with 0.8 mm corner radius Optimised for unalloyed and alloyed steel (ISO P) Prolonged tool life through advanced coating technology The Tiger‑tec Gold coating and the WPP35G grade deliver high wear resistance, thermal stability and repeatable edge performance under typical steel cutting conditions. By reducing flank wear and adhesion, the coated carbide minimises unscheduled tool changes and stabilises batch production. This technical combination supports higher productivity with predictable maintenance intervals and makes the grade suitable for extended cutting cycles on steels that generate significant heat during machining. Geometry tuned for chip control and surface consistency The insert’s rectangular shape and the L55 chipbreaker are designed to direct and fragment chips reliably during milling, improving evacuation and reducing re-cutting. The 0° negative rake lowers cutting edge vulnerability in interrupted cuts, while the 0.8 mm corner radius balances edge strength with surface finish. Together these features produce steady cutting forces and help maintain consistent component tolerances, especially in series production where repeatability is essential. Broad applicability across common steel applications Classified for the ISO P material group, the grade is tailored for both unalloyed and alloyed steel, covering a wide range of everyday milling tasks. This versatility reduces tooling complexity on the shop floor and supports flexible process planning: one insert grade can serve roughing and medium finishing operations when cutting parameters are adapted. The result is a simpler inventory and reliable machining across typical steel components. Process security and integration into standard tool systems Produced within the Tiger‑tec Gold series, the WPP35G grade offers consistent edge quality and tolerance class G, which eases insertion into standard toolholders and repeatable set‑up procedures. The stable cutting performance contributes to process security and quality assurance across production runs. For customers seeking predictable machining results, the insert’s combination of grade, geometry and series pedigree delivers measurable improvements in cycle stability. Contact Metav Werkzeuge for application‑specific cutting data and supply of the LNGX130708R-L55 WPP35G; expert advice and tailored recommendations are available to optimise machining performance. Technical data Article number: LNGX130708R-L55-WPP35G-WALTER Designation: LNGX130708R-L55 WPP35G Product type: Milling insert Brand: Walter Tools Dimensions and core data Plate size: 13 mm Thickness: 7 mm Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: G Features and application Grade/coating: WPP35G (Tiger‑tec Gold) Chipbreaker: L55 Shape: Rectangular Series: Tiger‑tec Gold Material group: Steel (ISO P) Execution: X UID: LNGX130708R-L55-WPP35G-WALTER FAQ What materials is this insert suitable for? The LNGX130708R-L55 WPP35G is specified for the ISO P material group, meaning it is optimised for machining unalloyed and alloyed steel. How does the L55 chipbreaker affect machining? The L55 chipbreaker on this insert promotes controlled chip formation and evacuation, improving process stability and reducing the risk of re‑cutting. What advantage does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on the WPP35G grade increases wear resistance and thermal stability, extending tool life during demanding steel cutting operations. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake enhances edge robustness in interrupted cutting conditions, helping to protect the cutting edge during heavy engagements. How does the 0.8 mm corner radius influence surface finish? A 0.8 mm corner radius balances edge strength with surface quality, delivering a stable finish while maintaining durability for longer cycles. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names mentioned are the property of their respective owners. Brand names are used for explanation only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer.
LNGX130708R-L55 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WSM35G grade for demanding machining of stainless steels and heat‑resistant alloys; the insert’s negative 0° rake and 0.8 mm corner radius deliver stable cutting edges and consistent performance. Order genuine Walter Tools inserts via Metav Werkzeuge or consult their specialists for application advice. LNGX130708R-L55 WSM35G – milling indexable insert, Walter Tools The LNGX130708R-L55 WSM35G is a rectangular milling insert designed for productive machining of stainless steels and heat‑resistant superalloys in industrial milling applications Tiger·tec Gold coating WSM35G grade for stainless and superalloys Negative 0° rake for robust engagement 0.8 mm corner radius for reliable edge strength Higher productivity with a specialised grade and coating The combination of the Tiger·tec Gold coating and the WSM35G carbide grade provides a measurable improvement in wear resistance and thermal stability during high‑load milling. This results in longer edge life and fewer tool changes, which supports uninterrupted production cycles. The coating is optimised for adhesion and thermal protection, helping the insert maintain cutting performance when machining stainless steels and heat‑resistant alloys that typically generate high temperatures and adhesive wear. Geometry engineered for process security The insert’s negative 0° rake and 0.8 mm corner radius contribute to a stable cutting geometry that resists chipping and maintains dimensional accuracy over extended runs. The rectangular format and nominal thickness help ensure correct seating and repeatable clamping in indexable milling cutters, while the corner radius provides a balance between edge strength and surface finish. These geometric choices reduce the risk of premature tool failure and support consistent part quality in serial production. Controlled chip formation and improved surface results Equipped with the chipbreaker L55, the insert delivers reliable chip control across the recommended material groups, reducing the likelihood of entanglement and improving swarf evacuation. Stable chips and predictable cutting forces help to lower spindle load variance and can lead to better surface finish with fewer secondary operations. In practice, this contributes to reduced cycle times and a more efficient machining process on demanding workpieces. Application fit and integration into machining cells Designed in line with ISO material group assignments, the insert is suitable for ISO 513 groups M (stainless steels) and S (heat‑resistant alloys and titanium), making it a focused solution for aerospace, power generation, and specialised stainless steel components. The insert size, rectangular shape and chipbreaker make it straightforward to integrate into standard milling cutters and replace worn inserts without extensive set‑up changes, supporting quick changeover and process continuity. Contact Metav Werkzeuge today for tailored application advice or to source genuine Walter Tools LNGX130708R-L55 WSM35G inserts — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: LNGX130708R-L55-WSM35G-WALTER Type designation: LNGX130708R-L55 WSM35G Manufacturer: Walter Tools Facts Insert size: 13 mm Thickness: 07 Corner radius: 0.8 mm Rake angle: 0° (negative) Special features Grade: WSM35G (Tiger·tec Gold) Chipbreaker: L55 Shape: Rectangular Material applicability: stainless steels (M), heat‑resistant alloys/titanium (S) Tolerance class: G FAQ What materials is this insert suitable for? The LNGX130708R-L55 WSM35G insert is formulated for stainless steels (ISO group M) and heat‑resistant alloys or titanium (ISO group S), providing reliable machining in those demanding material classes. How does the Tiger·tec Gold coating benefit the cutting process? The Tiger·tec Gold coating on this Walter Tools insert enhances thermal resistance and reduces adhesive wear, extending edge life and improving performance when milling tough, heat‑generating materials. What is the role of the chipbreaker L55? The chipbreaker L55 on the insert promotes stable chip formation and easier swarf evacuation, which supports consistent cutting forces and improved surface quality during milling operations. What does the negative 0° rake mean for application? A negative 0° rake provides a robust cutting edge and better shock resistance, making the insert suitable for heavier engagement and interrupted cuts while maintaining dimensional stability. Which dimensions and tolerance class apply to this insert? The insert is 13 mm in size, with a thickness code of 07, a corner radius of 0.8 mm, and is produced to tolerance class G for consistent interchangeability. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. The mentioned brand is used for explanatory purposes only; there is no affiliation between our company and the brands listed. The offered item is an original, factory‑new product of the manufacturer.
LNGX130708R-L55 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, a robust L55 chipbreaker and a 0° negative rake for stable cutting and consistent surface finish; these characteristics contribute to longer tool life and reliable milling performance. Order the LNGX130708R-L55 WSP45G directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. LNGX130708R-L55 WSP45G milling indexable insert — Tiger‑tec Gold, P/M/S application (Walter Tools) LNGX130708R-L55 WSP45G is a rectangular milling indexable insert engineered for demanding milling tasks across steel, stainless steel and heat‑resistant superalloys Tiger‑tec Gold PVD‑coated carbide Suitable for Steel, Stainless steel and Superalloys Chipbreaker L55 for stable chip formation 0° negative rake; 0.8 mm corner radius Consistent edge life through advanced coating technology The Tiger‑tec Gold coating combined with the WSP45G grade delivers a wear‑resistant surface that supports stable cutting-edge performance in a wide range of materials. Designed as a coated carbide insert, the combination of PVD coating and the underlying carbide substrate reduces flank and crater wear under typical milling heat loads. Where steels generate significant heat and stainless steels tend to adhere to the cutting edge, the coating and substrate pairing promote predictable chip control and reduce the risk of built‑up edge. The insert’s chipbreaker L55 and a 0.8 mm corner radius contribute to controlled chip formation and a reliable surface finish, making the insert suitable for both continuous and slightly interrupted cuts. Improved process reliability and productivity in milling The rectangular geometry and 0° negative rake make this insert particularly robust for heavy engagement and interrupted milling operations. The design focuses on process reliability: a stable cutting edge reduces the likelihood of unexpected tool changes and helps to maintain constant part quality. With the LNGX130708R-L55 WSP45G configured in the correct toolholder, shops benefit from longer insert life and fewer rework cycles, which supports higher productivity and consistent batch outcomes. The combination of a proven chipbreaker and the Tiger‑tec Gold technology contributes to predictable performance across the P, M and S material groups. Practical guidance for material selection and application The insert is specified for machining the ISO material groups P, M and S — that is, unalloyed and alloyed steels, stainless steel, and heat‑resistant superalloys or titanium alloys. These material classes exhibit differing thermal and mechanical behaviours: steels commonly require solid edge stability, stainless steels demand attention to sticking and work hardening, and superalloys stress the cutting edge due to poor thermal conductivity. The insert’s geometry, chipbreaker and coating are matched to these demands to support secure chip evacuation and repeatable cutting results. Details such as the rectangular form, the size designation and the thickness code are intended to match standard cutter bodies and clamping systems for straightforward integration. Operational benefits and predictable machining results Choosing a coated carbide insert with a dedicated chipbreaker like L55 helps to reduce cycle‑to‑cycle variability and to lower scrap rates. The Tiger‑tec Gold family is designed for balanced hardness and toughness, which translates into improved wear resistance without sacrificing edge strength. The combination of stable chip control and a resilient PVD coating typically results in better surface quality and extended tool life compared with uncoated grades in similar applications. For production environments where repeatability and uptime are priorities, this insert offers a pragmatic balance between performance and robustness. Discuss application‑specific tooling with Metav Werkzeuge to match the LNGX130708R-L55 WSP45G to production needs — the Metav Werkzeuge technical team provides material‑specific recommendations and cutting‑data guidance Technical data SKU: LNGX130708R-L55-WSP45G-WALTER Designation: LNGX130708R-L55 WSP45G Brand: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Execution: X Plate form: Rectangular Core dimensions and figures Size: 13 Thickness code: 07 Corner radius: 0.8 mm Rake angle: 0° (negative) Tolerance class: G Chipbreaker: L55 Materials & special features Coating: Tiger‑tec Gold (PVD coated carbide, WSP45G) Suitable for: Steel (P), Stainless steel (M), Superalloys / Titanium (S) Shape: Rectangular Series name: Tiger‑tec Gold Execution code: X FAQ Which materials can be machined with this insert? The LNGX130708R-L55 WSP45G is specified for ISO groups P, M and S — suitable for steels, stainless steels and heat‑resistant superalloys or titanium alloys. What is the benefit of the L55 chipbreaker? The L55 chipbreaker on this insert promotes stable chip formation, aiding evacuation and contributing to consistent surface finish and tool life. How does the 0° negative rake affect performance? A 0° negative rake increases edge robustness for interrupted cuts and heavy cross‑sections, supporting process reliability in demanding milling operations. Is the Tiger‑tec Gold coating suitable for high‑temperature applications? The Tiger‑tec Gold PVD coating enhances wear resistance and helps maintain cutting‑edge integrity under elevated temperatures commonly encountered when machining P, M and S material groups. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are stated for explanation and identification purposes only. The offered item is an original, factory‑new product of the manufacturer, and there is no affiliation between Metav Werkzeuge and the named brands.
LNGX130708R-L88 WK10 Wendeplatten - Walter Tools
Combining stable chip formation, precise geometry and a robust grade delivers consistent milling performance and predictable edge life; the rectangular design and L88 chipbreaker support efficient chip control while maintaining repeatability—order directly via Metav Werkzeuge or consult the technical team for application matching. Milling indexable insert LNGX130708R-L88 WK10 – rectangular insert with L88 chipbreaker (Walter Tools) A LNGX130708R-L88 WK10 rectangular milling insert engineered for reliable chip control and repeatable edge location in industrial milling applications. Uncoated carbide grade WK10 Rectangular insert, 13 mm edge length 0° negative rake for robust cutting 0.8 mm corner radius for versatile finish L88 chipbreaker for stable chip control Greater process stability through optimised chip control The combination of a dedicated L88 chipbreaker and precise insert geometry reduces the risk of unstable chips and helps to maintain a steady machining cycle. The chipbreaker is designed to guide swarf away from the cutting zone, which supports uninterrupted production and reduces rework. By choosing an insert with defined chip formation characteristics, tool life and machine uptime can be improved, making the tooling decision a clear contributor to productivity. Robust, repeatable edge life from an uncoated grade The WK10 designation refers to an uncoated carbide grade intended to offer a balance between toughness and wear resistance. The plain carbide substrate provides a reproducible cutting edge that responds predictably under varying loads. For detailed material matching, the product matrix should be consulted to verify suitability for specific workpiece materials and cutting parameters. This approach ensures the correct grade selection and reduces the risk of premature wear. Accurate positioning and dimensional control for consistent results The rectangular form and defined corner radius of 0.8 mm support repeatable insert indexing and consistent surface results across multiple tool changes. The insert is supplied in the LNGX130708R-L88 geometry with a negative 0° rake, which contributes to a robust cutting edge that tolerates intermittent cuts and heavier engagement. Tolerance class G signals a controlled dimensional range for secure clamping and predictable run-out, supporting high repeatability in batch production. For dependable milling results with Walter Tools precision inserts, contact Metav Werkzeuge for tailored application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: LNGX130708R-L88-WK10-WALTER Product: Milling indexable insert LNGX130708R-L88 WK10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WK10 Facts Insert size: 13 Plate thickness: 07 Corner radius: 0.8 mm Free cutting angle: 0° (negative) Tolerance class: G Special features Chipbreaker type: L88 Plate shape: Rectangular Execution: X Coating / material note: uncoated carbide (WK10) Material designation: catalogue dependent ISO designation: LNGX130708R-L88 WK10 FAQ What is the primary benefit of the L88 chipbreaker? The L88 chipbreaker provides controlled chip formation to support steady machining and easier swarf evacuation when using the LNGX130708R-L88 WK10 insert from Walter Tools. Is the WK10 grade coated or uncoated? The WK10 grade of the LNGX130708R-L88 is an uncoated carbide grade, offering a consistent cutting edge and predictable wear characteristics. What does a 0° (negative) free cutting angle mean in practice? A 0° negative free cutting angle indicates a robust edge geometry that helps resist chipping under interrupted cutting and heavier engagement, increasing tool reliability. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius balances strength and finish: it improves edge durability while still permitting a controllable surface quality for many industrial milling tasks. Where can material suitability for this insert be verified? Material suitability should be confirmed using the manufacturer's product matrix and cutting data; the LNGX130708R-L88 WK10 insert requires application-specific verification to ensure optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation with our company. The offered article is an original, factory-new product of the manufacturer.
LNGX130708R-L88 WXN15 Wendeplatten - Walter Tools
The uncoated tungsten‑carbide insert delivers sharp cutting performance and reliable chip control for non‑ferrous machining, while the rectangular 13 format and 0.8 mm corner radius support consistent edge life and surface finish. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. Milling indexable insert LNGX130708R-L88 WXN15 – uncoated carbide for non‑ferrous metals (Walter Tools) A LNGX130708R-L88 WXN15 milling indexable insert engineered for sharp, uncoated cutting of aluminium, copper and brass in finishing and semi‑finishing applications. Uncoated carbide for non‑ferrous metals Negative 0° clearance for stable engagement Chipbreaker L88 for controlled chip formation Rectangular 13 format with 0.8 mm radius Consistent machining for non‑ferrous materials The insert is based on the WXN15 uncoated carbide grade, optimised for machining non‑ferrous metals such as aluminium, copper and brass. The combination of a very sharp cutting edge and the chipbreaker L88 reduces material adhesion and promotes predictable chip flow, which in turn lowers rework and improves throughput. This makes the component particularly suitable for high‑precision finishing where surface quality and repeatability are decisive. Geometry that stabilises the process and extends edge life With a rectangular form and an insert size of 13, the geometry provides a stable seating and predictable cutting forces. The 0.8 mm corner radius balances edge strength and surface finish, and the 0° (negative) clearance ensures a controlled entry angle for interrupted cuts or shallow radial engagements. These features together reduce edge chipping and enable longer tool life, resulting in fewer indexings and a steadier production rhythm. Practical advantages and application guidance The uncoated design of this grade supports very sharp edges and is therefore preferred for uncoated applications on NE‑materials; the insert is not coated, which simplifies edge replacement strategies and avoids coating‑related adhesion on soft alloys. The LNGX130708R-L88 WXN15 insert is intended for users seeking consistent chip control and reliable finishing results; pairing it with appropriate feeds and a chip evacuation strategy will maximise performance. For specific cutting parameters and grade selection, Metav Werkzeuge can provide tailored recommendations and machining data. Contact Metav Werkzeuge for personalised grade advice and to secure Walter Tools LNGX130708R-L88 WXN15 inserts for non‑ferrous production requirements. Technical data SKU: LNGX130708R-L88-WXN15-WALTER Label: Fräswendeschneidplatte LNGX130708R-L88 WXN15 Walter Tools Type: Milling indexable insert Brand: Walter Tools Series: Walter N‑Sortensystem Grade: WXN15 Numbers / Core technical data Insert size: 13 Thickness designation: 07 Corner radius: 0.8 mm Clearance angle: 0° (negative) Tolerance class: G Designs / Special features Rectangular plate form Chipbreaker: L88 Uncoated carbide for non‑ferrous metals Sharp, uncoated edge for NE‑materials Series description: Walter N‑Sortensystem FAQ Which materials is this insert suited for? The LNGX130708R-L88 WXN15 insert is designed for non‑ferrous metals — chiefly aluminium, copper and brass — using the WXN15 uncoated carbide grade for reduced adhesion and predictable cutting. Is the insert coated, and what is the practical consequence? This insert is uncoated (WXN15). The uncoated edge allows a very sharp cutting geometry, which is advantageous for soft, sticky alloys where coatings can promote build‑up. What role does the chipbreaker L88 play in machining? The L88 chipbreaker shapes and breaks chips to improve evacuation and reduce the risk of material reattachment on the cutting edge, supporting consistent surface finish and fewer interruptions. How does the negative 0° clearance affect cutting? A 0° (negative) clearance provides a controlled engagement angle that can stabilise the insert during side cutting and in interrupted cuts, enhancing edge robustness in demanding passes. What does the 0.8 mm corner radius mean for surface finish? A 0.8 mm radius offers a compromise between edge strength and surface quality: it reduces the risk of chipping while still allowing fine finishing passes when combined with appropriate feeds. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
LNGX130712R-L55 WKP25S Wendeplatten - Walter Tools
The combination of Tiger‑tec Silver coating and the WKP25S grade delivers high productivity and extended tool life for machining Stahl and cast iron; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. LNGX130712R-L55 WKP25S milling insert (Tiger‑tec Silver) — for Stahl and cast iron | Walter Tools A LNGX130712R-L55 WKP25S milling insert engineered for robust engagement and reliable chip control in demanding milling operations on Stahl and cast iron. Tiger‑tec Silver coating for extended wear life WKP25S grade for broad material coverage Negative rake 0° for heavy-duty engagement 1.2 mm corner radius for secure edge stability Maximise uptime through wear‑resistant coating and grade The Tiger‑tec Silver coating combined with the WKP25S carbide grade is designed to reduce flank and crater wear under the thermal and mechanical loads typical of milling Stahl and cast iron. Coating technology improves abrasion resistance and helps to prevent premature edge breakdown; as a result, tool change frequency is lowered and productive machining time is increased. For operations that demand repeatable results, this configuration supports consistent surface quality and process stability. Reliable machining performance and chip control Equipped with an L55 chipbreaker and a rectangular geometry, this indexable plate ensures controlled chip formation during roughing and semi‑finishing passes. The 0° negative rake provides robust cutting edge engagement where rigidity is required, while the 1.2 mm corner radius increases edge strength to withstand intermittent cuts. These features combine to give predictable forces and manageable chips, simplifying coolant and chip management in the machining cell. Suitable applications and installation guidance The insert is specified for machining applications within the ISO groups P and K, meaning it is suitable for a wide range of Stahl grades and for cast iron components. Its designation and tolerance class support compatibility with standard milling toolholders designed for the LNGX form factor. When selecting cutter bodies, attention to seat geometry and clamping torque is advised so that the plate seating and cutting edge geometry deliver the intended performance and repeatability. For procurement or tailored process recommendations based on Walter Tools' Tiger‑tec Silver technology, contact Metav Werkzeuge for consultancy and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: LNGX130712R-L55-WKP25S-WALTER Designation: LNGX130712R-L55 WKP25S Product type: milling insert Facts Size: 13 mm Corner radius: 1.2 mm Rake angle: 0° (negative) Tolerance class: G Special features Series: Tiger‑tec Silver Grade: WKP25S (coated carbide) Chipbreaker: L55 Plate form: Rectangular Applicable materials: P (Stahl), K (cast iron) Execution: X FAQ What materials is the insert suitable for? The LNGX130712R-L55 WKP25S insert is suitable for ISO groups P and K, explicitly covering a wide range of Stahl grades and cast iron applications. How does the Tiger‑tec Silver coating affect performance? The Tiger‑tec Silver coating on the WKP25S grade increases abrasion resistance and thermal stability, which extends tool life and maintains surface finish over longer machining cycles. What is the effect of the 0° negative rake on cutting behaviour? A 0° negative rake produces a more robust cutting edge that tolerates heavy engagement and unstable cutting conditions, making the insert suitable for demanding milling tasks where rigidity is essential. Which chipbreaker is integrated and why is it important? The insert features the L55 chipbreaker, designed to produce short, controllable chips and to improve evacuation when machining Stahl and cast iron, aiding process reliability and shop‑floor safety. Protected trademarks and trade names are the property of their respective owners. Brand names are used here for explanation only. There is no association between our company and the named manufacturers. The offered item is an original, factory‑new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LNGX130712R-L55 WKP35G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating and the WKP35G grade combined with an optimised L55 chipbreaker, this insert delivers consistent chip control and long tool life for milling of steel and cast iron; order the LNGX130712R-L55 WKP35G insert directly via Metav Werkzeuge or consult the technical team for application advice. LNGX130712R-L55 LNGX130712R-L55 WKP35G — Milling indexable insert (Steel & Cast iron) — Walter Tools A LNGX130712R-L55 WKP35G milling indexable insert engineered for productive milling operations on steel and cast iron, utilising the Tiger‑tec Gold coating technology. Tiger‑tec Gold coated carbide grade WKP35G Optimised L55 chipbreaker for reliable chips 0° negative rake for stable cutting Rectangular insert with 1.2 mm corner radius High-performance grade for steel and cast‑iron milling The WKP35G grade, implemented in the Tiger‑tec Gold family, is a coated carbide solution optimised for the thermal and abrasive conditions found when machining ISO group P (steel) and K (cast iron). The coating and substrate combination improves wear resistance and extends edge life, which reduces the frequency of index changes and supports longer unmanned runs. For process engineers this means fewer interruptions and a predictable tool‑life window, contributing directly to higher overall machine productivity. Reliable chip control that improves surface quality Equipped with the L55 chipbreaker, the geometry focuses on controlled chip formation and evacuation during intermittent and continuous cuts. The chipbreaker design reduces the risk of long, entangling chips and helps maintain a stable cutting zone, which normally results in more consistent surface finish and reduced rework. The tangible benefit is fewer machine stoppages and improved part quality, especially when machining medium to high carbon steels and diverse cast‑iron grades. Geometry engineered for process stability The insert’s 0° negative rake delivers a robust cutting edge that resists chipping under heavy engagement, while the rectangular form and 1.2 mm corner radius balance strength and edge life. This geometry is particularly suitable for shoulder milling and planing operations where stability is critical. The insert execution code X indicates a standardised layout compatible with common milling toolholders, aiding quick integration into existing toolsets without the need for bespoke adaptors. Operational benefits and brand reliability Using a Tiger‑tec Gold grade from Walter Tools typically leads to repeatable performance and consistent results across batches. The focused combination of coating technology, chip control and negative‑rake geometry helps to lower cost per component through extended edge life and improved machining stability. For production managers this translates into fewer tool changes, predictable production windows and a measurable contribution to machining economy. Contact Metav Werkzeuge today to specify the LNGX130712R-L55 WKP35G insert for the intended steel or cast‑iron application or to request cutting data and grade advice from the technical team Technical data Article number: LNGX130712R-L55-WKP35G-WALTER Name: LNGX130712R-L55 WKP35G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Core data Corner radius: 1.2 mm Plate size: 13 mm Thickness code: 07 Free rake: 0° (negative) Tolerance class: G Special features Grade: WKP35G Chipbreaker: L55 Shape: Rectangular Applicable materials: Steel (P), Cast iron (K) Execution: X Coating/Technology: Tiger‑tec Gold Substrate: Coated carbide FAQ What materials is this insert suitable for? The LNGX130712R-L55 WKP35G insert is designed for ISO groups P and K, making it suitable for machining steel and cast iron in a wide range of operations. How does the L55 chipbreaker affect machining? The L55 chipbreaker promotes controlled chip formation and evacuation, reducing the risk of entangling chips and supporting improved surface finish and process stability. Is the 0° negative rake suitable for heavy cuts? Yes, the 0° negative rake on this insert provides a robust edge that resists chipping under heavy engagements, enhancing reliability in demanding milling tasks. What benefit does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances wear resistance and thermal stability, which contributes to longer tool life and more predictable performance when machining abrasive or heat‑generating materials. Can this insert be used in standard toolholders? The insert’s rectangular form and execution code X are compatible with common milling toolholders, simplifying integration into existing tooling systems. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the listed brands. The offered item is an original, factory‑new product of the manufacturer.
LNGX130712R-L55 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP35S grade for durable performance in steel and cast-iron milling; the rectangular geometry with an L55 chipbreaker and a 1.2 mm corner radius ensures consistent chip control and stable cutting. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. LNGX130712R-L55 WKP35S rectangular milling insert – Tiger·tec Silver, negative 0° rake (Walter Tools) A LNGX130712R-L55 WKP35S indexable milling insert designed for productive machining of steel and cast iron with a Tiger·tec Silver coated carbide grade. Tiger·tec Silver coated carbide for long life Optimised L55 chipbreaker for controllable chips Rectangular geometry with 1.2 mm corner radius Negative 0° rake for stable, heavy cutting Long-lasting grade for demanding steel and cast-iron work The insert is built around the WKP35S coated-carbide grade within the Tiger·tec Silver series, developed to manage the typical heat generation and wear patterns associated with machining steel and cast iron. This composition promotes stable flank wear and a predictable flank-life curve, which translates into fewer unscheduled tool changes and higher uptime on production lines. The coated substrate improves resistance to abrasive wear while maintaining edge integrity during interrupted cuts. Where repeatability and cycle-time are critical, this insert provides a consistent baseline performance for shops running mixed steel and cast-iron batches. Stability and chip control for higher productivity Featuring a negative 0° rake and an L55 chipbreaker, the insert is optimised for stable engagement and effective chip formation under moderate to heavy cutting conditions. The rectangular form and 1.2 mm corner radius support robust corner life, reduce the risk of chipping in axial and radial encounters, and help maintain dimensional accuracy during extended runs. The chipbreaker geometry encourages short, manageable chips when cutting cast iron and smoother, curl-controlled chips when machining steel, simplifying swarf management and reducing downtime for clearing. Integration into tool systems and predictable tolerance Manufactured to tolerance class G with the designation LNGX130712R-L55, the insert fits standard clamping systems for this form factor and allows straightforward indexing during regrinds or replacements. The catalogue-grade specification and consistent coating process enable predictable tool-life calculations and process planning. For operations seeking to scale throughput without sacrificing surface integrity, the combination of geometry and grade makes the insert a reliable element in tool packs aimed at medium to high material removal rates. Practical application advice and recommended use cases This insert suits production environments that prioritise process security and repeatable part quality: general-purpose milling of shafts, housings and heavy components in steel and cast iron; slotting and shoulder work where chip control is essential; and mixed-production cells where a single grade across materials reduces tooling complexity. When selecting cutting parameters, favour the negative-rake strategy for interrupted cuts or tough contact scenarios; for finishing passes, moderate feeds paired with the insert’s radius support improved surface finish. For bespoke suggestions on cutting data and toolholder compatibility, consult the supplier. Contact Metav Werkzeuge for application advice, availability and a personalised quotation via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: LNGX130712R-L55-WKP35S-WALTER Name: Fräswendeschneidplatte LNGX130712R-L55 WKP35S Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Silver Grade: WKP35S Core specifications Free rake: 0° (negative) Corner radius: 1.2 mm Plate form: Rectangular Plate size: 13 Plate thickness: 07 Chipbreaker: L55 Tolerance class: G Material groups: P / K Materials & special features Coating: Tiger·tec Silver (coated carbide) Main application: Steel and cast iron Designation: LNGX130712R-L55 Series information: Tiger·tec Silver; WKP35S is a coated-carbide grade Suitability: optimized for typical steel and cast-iron chip formation FAQ What materials is this insert suitable for? The LNGX130712R-L55 WKP35S insert is designed primarily for steel (P) and cast iron (K) applications, reflecting the capabilities of the WKP35S grade within the Tiger·tec Silver series. How does the L55 chipbreaker affect machining? The L55 chipbreaker promotes controlled chip formation for both steel and cast iron, reducing long, stringy swarf and helping to maintain stable cutting forces during milling with the Walter Tools insert. What does the negative 0° rake mean in practice? A negative 0° rake gives the insert greater edge strength and resistance to impact and heavy radial loads, making it suitable for interrupted cuts and roughing operations where stability is a priority. Can this insert be used in finishing passes? Yes, the rectangular geometry and 1.2 mm corner radius can support finishing passes when combined with appropriate feed and speed settings, delivering consistent surface quality in many industrial applications. Is the Tiger·tec Silver coating beneficial for tool life? The Tiger·tec Silver coating enhances wear resistance and edge stability, often extending tool life compared with uncoated grades, particularly in mixed steel and cast-iron production environments. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer Walter Tools. The Walter AG (brand appearance: Walter Tools) is part of the Sandvik group.
LNGX130712R-L55 WPP35G Wendeplatten - Walter Tools
High-performance machining of steels is supported by the Tiger‑tec Gold coating and the WPP35G grade, while the L55 chipbreaker and 0° negative rake ensure stable chip formation and consistent surface quality; order the insert directly via Metav Werkzeuge or ask the technical consultants for tailored cutting data. LNGX130712R-L55 WPP35G indexable milling insert – Tiger‑tec Gold for steel (Walter Tools) The LNGX130712R-L55 WPP35G is a rectangular indexable milling insert designed for productive steel machining, combining a Tiger‑tec Gold coated carbide grade with an L55 chipbreaker for controlled chips. Tiger‑tec Gold coating for extended tool life Optimised L55 chip control for stable chips 0° negative rake for robust milling stability 1.2 mm corner radius for precision finishing Productive performance for steel machining The insert delivers a measurable increase in process reliability through its Tiger‑tec Gold technology and the WPP35G coated carbide grade. These characteristics make the component particularly suitable for machining steel where heat and chip formation are critical factors. The coated carbide substrate provides a balance between wear resistance and toughness, reducing flank wear and enabling longer tool life. By selecting a grade tailored to the P material group, operators will benefit from more predictable tool behaviour and fewer unplanned tool changes, which translates into higher machine utilisation and lower unit costs. Stable chip control and surface quality Optimised geometry and the L55 chipbreaker work together to produce consistent, short chips and to reduce the risk of built-up edge during interrupted cuts. The 0° negative rake contributes to a robust cutting edge that resists chipping under heavy engagement, while the corner radius 1.2 mm supports improved surface finish and edge strength. These features mean fewer rework cycles and a more reliable finish straight off the machine, which is particularly valuable in production runs where repeatability and part quality are essential. Integration into productive tool systems The rectangular format and the specified dimensions allow straightforward integration into standard milling cutters and toolholders designed for this insert shape. The design supports stable clamping and repeatable indexability, simplifying tool management on the shop floor. Complementary process data from Metav Werkzeuge’s technical advisors can help select cutting speeds and feed rates that match the workpiece grade and machining strategy, ensuring the full potential of the insert is realised while preserving tool life and achieving consistent part tolerances. Contact Metav Werkzeuge for application-specific recommendations on Walter Tools Tiger‑tec Gold inserts and secure supply via Metav Werkzeuge’s technical consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: LNGX130712R-L55-WPP35G-WALTER SKU: LNGX130712R-L55-WPP35G-WALTER Designation: LNGX130712R-L55 WPP35G Product type: Indexable milling insert Manufacturer: Walter Tools Core technical data Grade: WPP35G Series: Tiger‑tec Gold Corner radius: 1.2 mm Relief angle: 0° (negative) Plate size: 13 Thickness: 07 Tolerance class: G Special features Coated carbide grade Chipbreaker: L55 Rectangular geometry Designed for steel (P) machining Execution: X FAQ What materials is this insert suited for? The LNGX130712R-L55 WPP35G is formulated for the P material group and is optimised for machining steel, providing good performance with unalloyed and alloyed steels. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating on this insert reduces wear and improves thermal stability, which typically extends tool life and maintains consistent cutting performance under standard steel machining conditions. What advantage does the 0° negative rake offer? A 0° negative rake increases cutting-edge robustness and resistance to chipping, making the insert suitable for heavier engagement and interrupted milling operations. Can this insert improve surface finish? Yes; the combination of the L55 chipbreaker and the 1.2 mm corner radius contributes to controlled chip evacuation and a stable cutting edge, which aids in achieving a better surface finish. Is the LNGX130712R-L55 WPP35G compatible with standard toolholders? The rectangular shape and standardised dimensions of the insert are intended for conventional milling holders that accept this geometry; verify holder compatibility with the insert designation. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new merchandise directly from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com