LNHU130612R-L55T WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of versatile WSP45G cutting grade and Tiger‑tec Gold coating for consistent machining across steels, stainless steels and heat‑resistant alloys; robust geometry and a dedicated L55T chipbreaker support reproducible chip control and long tool life. Order the insert directly via Metav Werkzeuge or consult the team for application advice. LNHU130612R-L55T WSP45G — milling insert for steel, stainless steel and superalloys (Walter Tools) A LNHU130612R-L55T WSP45G milling insert engineered for productive face milling and reliable chip control when machining steels, rostfreier Stahl and heat‑resistant alloys. Tiger‑tec Gold PVD coating for extended tool life Versatile grade for steel, stainless steel and superalloys 0° negative rake for robust cutting stability 1.2 mm corner radius for reliable edge strength High‑performance grade for broad material ranges The combination of the WSP45G grade with the Tiger‑tec Gold PVD system delivers a wear‑resistant cutting surface designed for demanding milling tasks. As a coated carbide grade developed for versatile milling, it balances toughness and thermal resistance to address the typical challenges when cutting P (steel), M (stainless steel) and S (heat‑resistant alloys and titanium). The integrated chipbreaker L55T supports stable chip formation, reducing the risk of built‑up edge and helping to maintain surface quality over longer tool lives. This translates into predictable process windows and reduced tool changes, supporting productive machining cycles. Geometry and edge security for robust machining The insert’s 0° negative rake and 1.2 mm corner radius combine to create a geometry that prioritises edge stability and resistance to mechanical and thermal shock. The rectangular plate form and negative rake make the grade particularly suited to interrupted cuts and heavier engagement depths, where a secure cutting edge and good seat support are essential. The robust form reduces vibrations and improves repeatability in series production, while the defined corner radius helps preserve edge integrity during ramping and exit cuts. Such geometric choices increase confidence in the cutting process and lower the likelihood of premature flank wear. Process benefits and practical application guidance Tolerance class H and consistent plate dimensions ensure reliable seating and repeatable clamping behaviour in indexable toolholders, supporting rapid tool set‑ups and consistent part quality. The insert’s balance of toughness and coating performance makes it suitable for mixed‑operation strategies: stable roughing followed by semi‑finishing without frequent grade changes. For users less familiar with technical terms: PVD describes the thin hard coating applied to the carbide to improve wear resistance, while the chipbreaker design actively shapes chips to avoid jamming. When combined with the correct feeds and speeds for the workpiece group, the insert supports efficient material removal and reliable component surfaces. For application support or availability of Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for tailored advice and ordering information: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: LNHU130612R-L55T-WSP45G-WALTER Designation: LNHU130612R-L55T WSP45G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WSP45G Facts Corner radius: 1,2 Rake angle: 0° (negativ) Plate size: 13 Plate thickness: 06 Tolerance class: H Special features Coating: Tiger‑tec Gold Chipbreaker: L55T Applicable materials: P / M / S Plate form: Rechteck Execution: U FAQ Which materials can this insert machine effectively? The LNHU130612R-L55T WSP45G insert is formulated for machining steels (P), stainless steels (M) and heat‑resistant superalloys or titanium (S), offering a versatile single‑grade solution. What advantages does the Tiger‑tec Gold coating provide? Tiger‑tec Gold enhances wear resistance and thermal stability on the LNHU130612R-L55T WSP45G, extending tool life and helping to maintain surface quality under elevated cutting temperatures. How does the L55T chipbreaker influence machining? The chipbreaker L55T actively shapes and controls chip formation, minimising the risk of entanglement and supporting consistent evacuation, which improves surface finish and reduces interruption risk. Is the insert suitable for heavy interrupted cuts? Yes — the 0° negative rake and the robust rectangular form provide secure edge support and resistance to shock, making it well suited to interrupted and heavy engagement applications. What does the tolerance class H mean for set‑up? Tolerance class H indicates consistent dimensional control of the insert, which supports repeatable seating in the toolholder and reliable clamping behaviour across production runs. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for descriptive purposes only; there is no affiliation between Metav Werkzeuge and the manufacturers mentioned. The item offered is original, factory‑new product from the stated manufacturer.
LNHU130616R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating, the negative 0° rake geometry and the robust 1.6 mm corner radius for reliable, high‑productivity milling of steel and cast iron; order directly via Metav Werkzeuge or consult the advisors for cutting data and tool pairing. Fräswendeschneidplatte LNHU130616R-L55T LNHU130616R-L55T WKP35G — Milling insert for steel and cast iron by Walter Tools Fräswendeschneidplatte LNHU130616R-L55T WKP35G is a carbide indexable insert optimised for productive face and shoulder milling in steel (P) and cast iron (K) Tiger·tec Gold coating for wear resistance Negative 0° rake for robust cutting action Rectangular geometry for stable clamping Corner radius 1.6 mm for improved edge strength Maximise metal removal with consistent chip control The coated carbide grade from the Tiger·tec Gold family brings a clear productivity advantage when machining abrasive or heat‑generating materials. The applied coating enhances wear resistance and reduces built‑up edge, which in turn supports longer tool life and steadier surface finish. With the designated chipbreaker L55T, chip formation is controlled to reduce recutting and evacuate chips efficiently — a practical benefit when running medium to heavy depths of cut on unalloyed and alloyed steel and on cast iron. The combination of coating and chip control therefore translates directly into higher process reliability and fewer unexpected tool changes. Robust geometry for secure performance under load A negative 0° rake gives the insert a mechanically stable cutting edge that tolerates higher radial forces and interrupted cuts typical in milling operations. The rectangular form and the 1.6 mm corner radius increase edge strength and reduce the risk of chipping, which is particularly relevant for demanding operations and catalogued geometries. These geometric attributes mean the insert delivers repeatable results across a batch, maintaining dimensional accuracy and surface consistency. For users aiming to reduce downtime and maintain steady production, this geometry supports reliable tool life and predictable replacement intervals. Practical selection and process guidance The grade is designated for ISO material groups P (steel) and K (cast iron), which indicates suitability across common workshop alloys rather than specifying the insert material itself. In practice, this means the insert is a good candidate for general steel machining and for abrasive cast materials where short, breaking chips are common. When integrating the insert into existing toolholders, ensure the clamping and seat match the rectangular shape and check cutter data for recommended cutting speeds and feeds. Conservative initial parameters help establish optimum cutting values quickly and protect the edge during trial cuts. Benefits for production management and quality Using a coated insert from a proven series reduces the frequency of unplanned tool changes and supports steadier throughput. The combination of a modern coating system and a robust edge geometry helps to achieve consistent surface quality and repeatable dimensions, supporting process stability across production lots. For procurement and tool management, the insert’s coded thickness and form allow straightforward replacement and inventory tracking, aiding lean workshop workflows without complex requalification steps. Contact Metav Werkzeuge for tailored cutting data, toolholder recommendations and order assistance: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: LNHU130616R-L55T-WKP35G-WALTER SKU: LNHU130616R-L55T-WKP35G-WALTER Item designation: Fräswendeschneidplatte LNHU130616R-L55T WKP35G Brand: Walter Tools Facts Corner radius: 1.6 mm Free rake angle: 0° (negative) Plate size: 13 Thickness code: 06 Tolerance class: H Special features Coating: Tiger·tec Gold Grade: WKP35G (coated carbide) Chipbreaker: L55T Shape: Rectangular Material application: Steel (P) and Cast iron (K) FAQ What materials is this insert suitable for? The LNHU130616R-L55T WKP35G insert from Walter Tools is specified for ISO groups P and K, making it suitable for steel and cast iron applications. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on the Walter Tools insert increases wear resistance and reduces built‑up edge, which supports longer tool life and improved surface finish in demanding milling tasks. What does the negative 0° rake mean in practice? A negative 0° rake provides a mechanically robust cutting edge that handles higher cutting forces and interrupted cuts more reliably than positive rake inserts. Is the chipbreaker L55T suitable for heavy cuts? The L55T chipbreaker is designed to control chip formation for efficient evacuation; it is appropriate for medium to heavy machining where stable chip control is required. How should the insert be introduced into a new process? Start with conservative cutting parameters and verify clamp and seat compatibility for the rectangular form; then adjust speeds and feeds based on observed tool life and surface quality. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new merchandise from the manufacturer. Walter Tools is a brand of Walter Deutschland GmbH.
LNHU130616R-L55T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP35G grade for productive Stahl machining; the rectangular geometry with a 0° negative rake and r1.6 corner radius ensures robust cutting and predictable edge life. Order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. LNHU130616R-L55T WPP35G – Rectangular milling insert, Tiger‑tec Gold (Walter Tools) The LNHU130616R-L55T WPP35G is a rectangular milling insert engineered for reliable, high-performance Stahl machining under general to demanding cutting conditions. Tiger‑tec Gold coated carbide grade WPP35G Optimised for Stahl machining (ISO P) Negative 0° rake for robust cutting r1.6 corner radius for stable edge life Consistent cutting performance for industrial Stahl applications The combination of Tiger‑tec Gold coating and the WPP35G grade provides a balance of wear resistance and toughness designed specifically for Stahl (ISO P). The coated carbide substrate controls heat and adhesion during high-temperature cutting, which translates into longer tool life and fewer indexings. The integrated chipbreaker L55T supports reliable chip formation and evacuation, reducing the risk of built-up edge and ensuring more consistent component surfaces. These technical characteristics produce measurable efficiency gains in production environments where repeatability matters. Robust geometry that protects the cutting edge and process stability A 0° negative rake geometry increases the insert’s mechanical strength at the cutting edge, making the tool particularly suitable for interrupted cuts or heavy engagement. The r1.6 corner radius contributes to a stable cutting edge that resists chipping and preserves dimensional accuracy over multiple tool lives. Together with tolerance class H, the insert offers process security and predictable clamping behaviour, which helps to maintain cycle-time stability and reduces the need for frequent adjustments. Practical format and handling for workshop integration The rectangular format in a compact 13 mm size with a 6 mm thickness provides a versatile solution for many face and slot milling applications. The standardised geometry ensures straightforward replacement and compatibility with common toolholders that accept this designation. As a coated carbide insert from Walter Tools, the component is intended for easy integration into existing tooling systems while delivering the performance and durability expected in industrial machining. Contact Metav Werkzeuge today for tailored advice on using Tiger‑tec Gold inserts in Stahl machining — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application parameters and tooling options Technical data Article number: LNHU130616R-L55T-WPP35G-WALTER Label: Fräswendeschneidplatte LNHU130616R-L55T WPP35G Walter Tools Product type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WPP35G Geometry: LNHU130616R-L55T Shape: Rectangular Corner radius: 1.6 mm Free angle: 0° (negative) Chipbreaker: L55T Thickness: 6 mm Size: 13 mm Tolerance class: H Material code: P (for Stahl) Manufacturer: Walter Tools Core technical data Corner radius: 1.6 mm Free angle: 0° Thickness: 6 mm Size: 13 mm Tolerance class: H Features / Special characteristics Tiger‑tec Gold coating technology Grade WPP35G (coated carbide) Chipbreaker L55T Rectangular insert form Suitable for Stahl machining FAQ What materials is this insert suitable for? The insert is formulated for machining Stahl (ISO P); the WPP35G grade and Tiger‑tec Gold coating are optimised for the heat and chip conditions typical when cutting Stahl. How does the 0° negative rake affect tool life? The 0° negative rake increases edge strength and resistance to chipping, improving tool life under heavy or interrupted cutting conditions compared with more acute rake geometries. Which chipbreaker should be expected on this insert? This designation includes the L55T chipbreaker, which is tuned to promote consistent chip formation and evacuation during common milling operations. Is this insert compatible with standard holders for rectangular inserts? Yes, the geometry LNHU130616R-L55T corresponds to a standard rectangular format; compatibility depends on the toolholder type and clamping method in use. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer.
LNHU130616R-L55T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, robust 1.6 mm corner radius and negative geometry for consistent chip control and extended edge life; order the inserts via Metav Werkzeuge or request application advice from our consultants. LNHU130616R-L55T WSM35G milling insert — Tiger·tec Gold grade for stainless steels and heat‑resistant superalloys (Walter Tools) The LNHU130616R-L55G WSM35G is a rectangular milling insert with a negative 0° geometry, optimised for demanding machining of stainless steels and superalloys, offering stable cutting behaviour and reliable edge life in heavy‑duty applications. Tiger·tec Gold coating WSM35G Optimised for stainless steel and superalloys Negative 0° geometry for stable cutting 1.6 mm corner radius for edge strength High thermal resistance and secure chip control for tougher materials The coated carbide grade WSM35G from the Tiger·tec Gold family combines a heat‑resistant coating system with a substrate engineered for tough alloys. This provides improved thermal stability and consistent chip formation, which reduces the risk of built‑up edge and unplanned rework when machining materials that tend to work‑harden. The integrated L55T chipbreaker supports controlled chip flow in semi‑continuous and segmented chips, translating the material and coating characteristics into measurable process advantages: fewer interruptions, longer tool life and a more reproducible surface finish on critical components. Designed geometry that stabilises cutting and increases productivity The insert’s negative 0° geometry and rectangular shape deliver a robust cutting edge suitable for interrupted cuts and higher feed rates. The 1.6 mm corner radius increases edge strength and reduces chipping during heavy depth‑of‑cut passes, while the negative relief improves positional stability in clamping systems. Together these attributes raise average material removal rates and help maintain dimensional accuracy over longer production runs. Shops focused on repeatability and throughput will recognise the direct productivity benefits and reduced downtime that this combination provides. Practical machining guidance and compatibility overview The insert is available in the specified rectangular format (size 13, thickness 06) and matched to the L55T chipbreaker for reliable performance in the M and S ISO groups. In practice, this means excellent suitability for stainless steels (group M) and heat‑resistant superalloys and titanium (group S). The coated carbide composition of WSM35G supports cutting at elevated temperatures and promotes stable cutting edges under thermal stress. When switching from standard grades, adjust cutting parameters conservatively and monitor chip shape; the insert’s geometry and chipbreaker are intended to support higher feeds with consistent chip evacuation. Support, selection and application advice to ensure the right tool choice For production environments where process security and repeatable component quality matter, pairing this graded insert with an appropriate cutter body and clamping setup is essential. Metav Werkzeuge can advise on recommended cutting data, suitable toolholders and workpiece‑specific strategies to exploit the Tiger·tec Gold advantages fully. The robust grade and proven geometry of the insert lower the overall machining cost per part by extending tool life and improving first‑pass yields, which supports faster cycles and predictable maintenance intervals. For specific cutting data, holder recommendations and to order Walter Tools LNHU130616R-L55T WSM35G inserts, contact Metav Werkzeuge via eMail or phone for tailored application support and rapid availability. Technical data Article number / SKU: LNHU130616R-L55T-WSM35G-WALTER Manufacturer: Walter Tools Product type: Milling insert (rectangular) Designation: LNHU130616R-L55T WSM35G Numbers / Core technical data Insert size: 13 Thickness: 06 Corner radius: 1.6 mm Clearance angle: 0° (negative) Chipbreaker: L55T Special features / Versions Series: Tiger·tec Gold Grade: WSM35G (coated carbide) Shape: Rectangular Geometry: Negative Material suitability: stainless steels (M), heat‑resistant superalloys and titanium (S) FAQ Is this insert suitable for machining stainless steel? Yes. The Walter Tools LNHU130616R-L55T WSM35G insert is specifically formulated for stainless steels (ISO group M), delivering improved chip control and resistance to work‑hardening. What advantages does the Tiger·tec Gold WSM35G grade offer? The WSM35G grade provides enhanced thermal stability and a coated carbide substrate that supports longer edge life and consistent cutting behaviour in demanding materials. How does the 1.6 mm corner radius affect performance? A 1.6 mm corner radius strengthens the cutting edge, reducing the risk of chipping under heavy cuts and contributing to stable dimensions and surface quality during high‑load operations. Which chipbreaker should be used for reliable chip control? The integrated L55T chipbreaker is designed to produce controlled chips in stainless steels and superalloys, improving evacuation and reducing the likelihood of surface damage. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
LNHU130616R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable Tiger·tec Gold coating, versatile WSP45G grade and robust negative geometry to boost milling productivity and tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for process-specific recommendations. LNHU130616R-L55T WSP45G — Indexable milling insert, Tiger·tec Gold, 0° negative free angle — Walter Tools The LNHU130616R-L55T WSP45G is a rectangular indexable milling insert designed for demanding face and shoulder milling where edge stability and chip control are essential Tiger·tec Gold PVD coating for universal milling Versatile for Stahl, rostfreier Stahl and Superalloys Negative 0° free angle for robust cutting edges 1.6 corner radius for durable edge life Durable coating for longer productivity and reduced wear The LNHU130616R-L55T WSP45G combines Tiger·tec Gold technology with a coated carbide substrate to deliver consistent wear resistance under high thermal and mechanical loads. This PVD-based finish supports stable chip formation and reduces flank wear in interrupted cuts, which in turn extends effective tool life and lowers the frequency of index changes. For production-oriented shops, this translates into fewer tool interventions and higher machine uptime, improving overall process economy without sacrificing precision. Geometry engineered for secure cutting and efficient chip control A 0° free angle (negative geometry) together with a 1.6 corner radius provides the mechanical strength required for heavy engagement and tough milling conditions. The integrated L55T chipbreaker ensures controlled chip formation and evacuation, helping to avoid recutting and surface damage. The rectangular plate form and sturdy edge preparation make this insert particularly suitable for shoulder milling and profile work where robustness and predictable wear behaviour are priorities. Broad applicability across materials and consistent surface quality The WSP45G grade is optimised for the ISO material groups P, M and S, making it a reliable choice for machining Stahl, rostfreier Stahl and heat-resistant superalloys or Titanium. The combination of grade and chipbreaker supports safe machining of materials that typically challenge cutters due to toughness or poor thermal conductivity. For operations seeking a balance between productivity and surface finish, this insert provides stable cutting edges that help maintain dimensional accuracy and repeatable results in series production. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and receive technical guidance or cutting recommendations directly from our team at Metav Werkzeuge. Technical data Article number / SKU: LNHU130616R-L55T-WSP45G-WALTER Designation: LNHU130616R-L55T WSP45G Series: Tiger-tec Gold Grade: WSP45G Version: U Core specifications Free angle: 0° Corner radius: 1.6 Plate size: 13 Plate thickness: 06 Tolerance class: H Design & special features Rectangular plate form L55T chipbreaker Coated carbide (PVD) Material suitability: Stahl, rostfreier Stahl, Superalloys/Titan Negative geometry for robust cutting edge FAQ What materials is this insert suitable for? The insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys or Titanium, reflecting the WSP45G grade’s P/M/S applicability. Why is the 0° free angle beneficial? A 0° free angle provides a negative geometry that reinforces the cutting edge, improving edge stability and resistance to mechanical shock during heavy or interrupted cuts. How does the L55T chipbreaker affect machining? The L55T chipbreaker promotes controlled chip formation and evacuation, reducing the risk of recutting and helping to maintain a consistent surface finish. Which production tasks suit this insert best? This insert is optimised for face and shoulder milling, roughing and applications requiring robust edge life and reliable chip control in series production. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is among the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is original, brand-new goods from the manufacturer Walter Tools.
LNHU130620R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G carbide grade and a robust chipbreaker L55T for a reliable machining process of steel and cast iron; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific cutting data. LNHU130620R-L55T WKP35G milling indexable insert — Tiger‑tec Gold, for steel and cast iron, Walter Tools A LNHU130620R-L55T WKP35G rectangular milling insert designed for productive machining of P (steel) and K (cast iron) applications, combining a coated carbide grade with a chipbreaker tuned for stable chip formation Tiger‑tec Gold coated carbide Grade WKP35G for P and K materials Rectangular form with corner radius 2 Robust chip control with L55T breaker Increased process reliability and longer tool life The Tiger‑tec Gold coating and the WKP35G carbide composition provide a balance between wear resistance and toughness that supports stable cutting under variable conditions. This insert is designed for consistent edge life when machining steel and cast iron according to ISO 513 classifications; the coating reduces thermal and abrasive wear while the substrate maintains fracture resistance. As a consequence, the component life is extended and tool change intervals are more predictable, which contributes to smoother production flow and reduced downtime. Robust geometry for demanding cutting conditions A negative 0° rake and the rectangular plate form give enhanced mechanical strength at the cutting edge, making the insert suitable for operations with higher radial loads. The pronounced corner radius 2 increases edge stability and lowers the risk of chipping on interrupted cuts, while the chipbreaker L55T promotes controlled chip formation and evacuation. For those less familiar with insert geometry: a negative rake increases cutting-edge support, and a dedicated chipbreaker assists in breaking and evacuating chips to protect the workpiece and tool. Practical application guidance and material compatibility The insert is intended primarily for the ISO material groups P (steel) and K (cast iron); P denotes unalloyed and alloyed steels and K stands for cast iron grades. The combination of the Tiger‑tec Gold coating and the WKP35G grade is tuned to handle the heat and chip behaviour typical of these groups. Further technical parameters such as insert thickness, plate dimensions and tolerance class are provided below to aid integration into existing toolholders. Further technical information and cutting data are available from Metav Werkzeuge on request. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Gold inserts, request application-specific cutting data or confirm toolholder compatibility via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LNHU130620R-L55T-WKP35G-WALTER Product type: Fräswendeschneidplatte / milling indexable insert ISO designation: LNHU130620R-L55T WKP35G Brand: Walter Tools Facts Plate size: 13 Plate thickness: 06 Corner radius: 2 Free rake: 0° (negativ) Tolerance class: H Plate form: Rechteck Special features Series: Tiger‑tec Gold Grade: WKP35G (coated carbide) Chipbreaker: L55T Material suitability: P / K (steel and cast iron) Execution: U FAQ Which materials is this insert suitable for? The LNHU130620R-L55T WKP35G insert is suitable for ISO material groups P and K, meaning it is designed for machining steel and cast iron. What is the key advantage of the Tiger‑tec Gold coating? The Tiger‑tec Gold coating on the WKP35G grade reduces thermal and abrasive wear, improving tool life and process stability during production machining. How does the 0° negative rake affect cutting performance? A 0° (negative) rake provides stronger support for the cutting edge and increased resistance to mechanical shock, which benefits applications with higher cutting forces or interrupted cuts. What role does the chipbreaker L55T play? The L55T chipbreaker promotes reliable chip formation and evacuation, reducing the likelihood of chip-related damage to the workpiece and improving surface finish consistency. What are the geometric details of the insert? The insert is rectangular in form, with a plate size of 13, plate thickness 06 and a corner radius of 2; its tolerance class is H and it is supplied in the LNHU130620R-L55T WKP35G specification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU130620R-L55T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of a Tiger‑tec Gold coated solution that combines robust WPP35G cutting performance and stable geometry for efficient steel machining; order directly via Metav Werkzeuge or consult our specialists for process optimisation. LNHU130620R-L55T WPP35G — Milling Insert (Rectangular), Tiger‑tec Gold, 0° negative rake — Walter Tools The LNHU130620R-L55T WPP35G is a rectangular milling insert designed for ISO P (steel) machining, offering Tiger‑tec Gold coating and a chipbreaker engineered for controlled swarf formation Tiger‑tec Gold coating for long tool life Designed for steel machining (ISO P) 0° negative rake for stable cutting Rectangular insert with 2 mm corner radius Higher productivity through a hard-wearing coating The combination of the Tiger‑tec Gold coating and the WPP35G grade delivers a marked improvement in tool life and repeatability when machining steels defined under ISO P. The specialised multi-layer coating reduces flank wear and improves thermal stability, which in turn allows for more consistent cutting parameters over longer tool life. For production environments this translates to fewer insert changes, less machine downtime and a more predictable process — a clear economic benefit when cycle time and consistency matter. Consistent chip control and secure cutting geometry Built with a chipbreaker L55T and a 0° negative rake, the geometry promotes uniform chip formation and stable cutting forces. The rectangular shape with a corner radius of 2 mm offers a balance between edge strength and surface finish, making the insert suitable for moderate finishing steps where robustness is required. The negative rake angle increases edge stability under interrupted cuts and heavy engagement, reducing the risk of edge chipping and improving process security in demanding milling operations. Application-focused efficiency for steel machining This insert is intended for the machining of steel (ISO group P) and is optimised to handle the heat and chip behaviour typical of that material group. The coated carbide grade provides universality across a range of steel grades, enabling productive material removal rates while maintaining acceptable surface quality. As part of Walter Tools’ Tiger‑tec Gold family, the insert supports production strategies that favour predictable performance and lower overall tooling costs, particularly in high-volume or mixed-lot workshops where reliability and rapid throughput are priorities. For reliable availability and application advice on Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge for personalised recommendations — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: LNHU130620R-L55T-WPP35G-WALTER Designation: LNHU130620R-L55T WPP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP35G Facts Plate size: 13 Thickness: 06 Corner radius: 2 mm Free angle: 0° (negative) Tolerance class: H Special features Coated carbide grade WPP35G Chipbreaker L55T Rectangular plate form Execution: U Suitable for steel (ISO P) FAQ What materials is this insert suitable for? The LNHU130620R-L55T WPP35G insert is specified for steel applications (ISO group P), offering coating and geometry tuned for typical steel chip formation. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WPP35G grade improves thermal and wear resistance, extending service life and supporting consistent machining results across production runs. What role does the 0° negative rake play? A 0° negative rake increases edge strength and stability, making the insert well suited to interrupted cuts and heavier milling operations where a robust cutting edge is required. Can this insert provide good surface finish? With a 2 mm corner radius and the chipbreaker L55T, the insert achieves a balance between strength and finish, enabling acceptable surface quality for many finishing passes in steel. Is this insert part of a recognised Walter Tools series? Yes, the insert belongs to the Tiger‑tec Gold series and is produced under Walter Tools' established grade and coating standards for metal cutting. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
LNHU130620R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WSP45G grade for reliable, long‑life machining across steel, stainless steel and heat‑resistant alloys; the combination of stable chip control and a 2 mm corner radius supports consistent part quality and tool life. Order original Walter Tools inserts via Metav Werkzeuge or consult the team for application-specific recommendations. Fräswendeschneidplatte LNHU130620R-L55T WSP45G — rectangular indexable insert with Tiger‑tec Gold The LNHU130620R-L55T WSP45G is an indexable milling insert designed for versatile milling operations on steels, stainless steels and superalloys. Tiger·tec Gold PVD coating for extended life Versatile for P / M / S applications Rectangular geometry with 0° negative rake Chipformer L55T for stable chip control Reliable cutting performance that raises process stability The Tiger‑tec Gold coating combined with the WSP45G grade delivers a wear‑resistant, coated carbide solution aimed at maintaining a stable cutting edge under varying heat and load conditions. This insert is engineered for milling operations where repeatable results are required across a broad material range: P (steel), M (stainless steel) and S (heat‑resistant superalloys and titanium). The material compatibility reduces set‑up complexity and helps to shorten series ramp‑up times, while the coated carbide substrate supports predictable tool life and surface finish. Geometry engineered for consistent chip control and edge security Rectangular plate geometry and a 0° negative relief angle promote a robust cutting edge that resists chipping in interrupted cuts and heavy engagement. The 2 mm corner radius smooths cutting transitions and improves surface integrity on finished parts, whereas the integrated chipformer L55T guides and breaks chips reliably to reduce rework and machine downtime. These features combine to lower the risk of edge build‑up and to support higher metal removal rates without compromising repeatability. Efficient integration and productivity gains in daily production Designed for easy fitment into standard milling holders, this insert supports process optimisation through longer intervals between indexings and fewer tool changes. The coated grade and stable geometry reduce unplanned stoppages and contribute to improved cycle time in high‑mix environments. For operation planning, the insert’s broad applicability simplifies tooling strategies and reduces inventory complexity, promoting cost efficiency and smoother production flow. For further machining parameters or application advice, Metav Werkzeuge can provide technical guidance to match speeds and feeds to specific workpiece materials. Contact Metav Werkzeuge for tailored cutting data and to discuss integrating the Walter Tools Tiger‑tec Gold insert into existing tool sets Technical Data Article number: LNHU130620R-L55T-WSP45G-WALTER Label: Fräswendeschneidplatte LNHU130620R-L55T WSP45G Walter Tools Facts Plate size: 13 Plate thickness: 06 Corner radius: 2 Relief angle: 0° (negative) Tolerance class: H Special features Series: Tiger‑tec Gold Grade: WSP45G Chipbreaker: L55T Shape: Rectangular Material suitability: P / M / S Coating: PVD coated carbide FAQ What materials is this insert suitable for? The LNHU130620R-L55T WSP45G insert is suitable for machining P (steel), M (stainless steel) and S (heat‑resistant superalloys and titanium), benefiting from the Tiger‑tec Gold coating and the WSP45G grade. How does the 0° negative relief angle affect performance? A 0° negative relief angle increases edge robustness and resistance to chipping during heavy milling; the geometry of the insert supports secure cutting in interrupted and high‑load conditions. What advantage does the L55T chipformer provide? The L55T chipformer improves chip breaking and evacuation, which reduces the likelihood of recutting and helps to maintain consistent surface quality and longer tool life. Is this insert compatible with standard rectangular milling holders? Yes, the LNHU130620R‑L55T insert is designed for use in common rectangular milling holders; Metav Werkzeuge can advise on holder selection and clamping recommendations. Can this insert improve productivity compared with uncoated grades? The Tiger‑tec Gold coating and WSP45G grade typically extend tool life and allow higher metal removal rates, contributing to improved productivity and fewer tool changes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for clarification purposes and do not indicate any affiliation with our company. The offered item is an original, brand‑new product from the manufacturer.
LNHU130625R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability from the Tiger‑tec Gold coating and the versatile WKP35G grade for efficient machining of steel and cast iron; the rectangular geometry with a 2.5 mm corner radius and L55T chipbreaker ensures consistent chip control and repeatable surface quality. Order the insert directly via Metav Werkzeuge or consult our technical team for cutting data and application advice. LNHU130625R-L55T WKP35G Milling indexable insert — Tiger‑tec Gold, for steel and cast iron (Walter Tools) LNHU130625R-L55T WKP35G is a rectangular milling insert engineered for medium‑ to heavy‑duty finishing and roughing operations in steel and cast iron, featuring the Tiger‑tec Gold coating and a dedicated L55T chipbreaker Tiger‑tec Gold coating for extended tool life WKP35G grade for steel and cast iron Rectangular insert with 2.5 mm corner radius L55T chipbreaker geometry for reliable chip control Consistent productivity through advanced coating and grade The Tiger‑tec Gold coating combined with the WKP35G grade provides a balanced solution for frequent, economical machining cycles. Coated carbide technology reduces abrasive wear and supports stable cutting-edge behaviour when machining group P (steel) and group K (cast iron) materials according to ISO designations. This insert’s coating system is tailored to maintain edge integrity under the thermal and mechanical loads typical of steel turning and cast‑iron milling, translating into fewer tool changes and more predictable production output. The result is measurable productivity gains and lower process downtime. Predictable chip control and surface quality for fewer reworks Equipped with the L55T chipbreaker, the insert channels chips reliably for both continuous and segmented chip forms, reducing the risk of re-cutting and machine interruptions. The rectangular geometry and 2.5 mm corner radius support consistent tool engagement and help achieve stable surface finish on each pass. Combined with the 0° (negative) rake configuration, the insert excels in applications that demand robustness and resistance to edge chipping, ensuring repeatable part quality and reducing secondary finishing operations. Application scope and process advantages This cutting grade is optimised for machining unalloyed and alloyed steel as well as cast iron, offering broad material coverage for job shops and production environments alike. The design supports both high material removal rate operations and finishing passes when process parameters are adapted accordingly. By selecting the appropriate cutting speeds and feeds for the WKP35G grade, operators benefit from improved tool life and consistent dimensional results, which in turn supports tighter process control and lower total cost per component. Practical integration and handling in production The insert’s ISO‑style designation and standard rectangular form make it straightforward to integrate into existing toolholder systems that accept this geometry. Identification as a coated carbide insert simplifies tool management and reordering. For assembly, standard mounting practice applies; ensure the seat and clamp are clean and torque is set per the toolholder manufacturer’s guidance to secure repeatable runout and stable cutting conditions. When paired with optimised machining parameters, this insert contributes to a reliable, economical production process. Contact Metav Werkzeuge for tailored cutting data and application recommendations for Walter Tools Tiger‑tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: LNHU130625R-L55T-WKP35G-WALTER Name: Milling indexable insert LNHU130625R-L55T WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: L55T Execution: U Tolerance class: H Facts Corner radius: 2.5 mm Plate size: 13 Thickness code: 06 Free angle: 0° (negative) Special features Coated carbide grade Suitable for ISO group P (steel) Suitable for ISO group K (cast iron) Rectangular plate form Designed for chip control and edge stability FAQ What materials is this insert suitable for? The LNHU130625R-L55T WKP35G insert (Walter Tools, Tiger‑tec Gold series) is designed for ISO group P (steel) and ISO group K (cast iron) machining. How does the Tiger‑tec Gold coating benefit production? The Tiger‑tec Gold coating on the WKP35G grade reduces abrasive wear and improves edge stability, which enhances tool life and supports stable process windows in steel and cast‑iron applications. What is the function of the L55T chipbreaker? The L55T chipbreaker promotes reliable chip formation and evacuation for a range of cutting conditions, helping to avoid re‑cutting and machine stoppages. Can this insert be used for finishing passes? Yes; when combined with appropriate cutting parameters the rectangular insert with a 2.5 mm corner radius delivers consistent surface quality suitable for finishing operations. Is the 0° free angle suitable for interrupted cuts? The 0° (negative) free angle provides increased edge strength and is advantageous in interrupted or heavy engagement cuts where chipping resistance is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU130625R-L55T WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold wear resistance, the WPP35G grade balance and a sturdy 2.5 mm corner radius for reliable, repeatable milling results; order the insert directly via Metav Werkzeuge or consult our specialists for cutting-data and application advice. LNHU130625R-L55T WPP35G — indexable milling insert, Tiger·tec Gold, Walter Tools The LNHU130625R-L55T WPP35G is a rectangular indexable milling insert optimised for steel machining, designed to deliver consistent chip control and long tool life in industrial milling applications. Tiger·tec Gold coating for extended tool life WPP35G grade for robust steel performance Rectangular form with 2.5 mm corner radius Negative 0° relief for stable cutting Durable coating and material balance for longer tool life The coated cemented-carbide technology of Tiger·tec Gold combined with the WPP35G grade provides a balanced performance profile that privileges wear resistance while retaining toughness for intermittent cuts. This composition is engineered for machining steel (ISO group P), where heat and chip formation demand a stable cutting edge. The grade’s allocation across wear/toughness categories (10 wear-resistant, 20 universal, 30/35 tougher) means fewer insert changes and more consistent part quality, which translates into lower cumulative tooling costs and predictable production throughput. Stable geometry for heavy cuts and reduced downtime A 2.5 mm corner radius and a 0° (negative) relief angle create a robust cutting edge that resists chipping under load and reduces vibration in interrupted or heavy milling passes. The rectangular shape adds support to the cutting edge, improving seat stability in the toolholder and lowering the risk of edge failure. Together these geometry choices support higher metal removal rates and improved surface finish while maintaining consistent tool life, which is critical for continuous production environments seeking reliable cycle times. Controlled chips and process predictability for steel applications The integrated L55T chipbreaker is optimised to form manageable chips when cutting steel, helping to prevent entanglement and improve coolant access to the cutting zone. With a clearly defined tolerance class H and the specified format, the insert supports reproducible clamping and interchangeability across tool sets. These features simplify process planning: consistent chip form, repeatable edge life and straightforward tool management reduce machine idle time and simplify operator instructions on the shop floor. Practical integration and application support for production use This insert is aimed at machining operations where throughput and consistency matter. The combination of Walter Tools engineering and the Tiger·tec Gold series supports predictable performance across batches, making it suitable for serial production and job-shop environments alike. For specific cutting parameters, workpiece variants or to check compatibility with existing toolholders, technical advice is available. Contact details and expert support can assist with feed/speed recommendations and insertion guidelines to ensure the tool integrates smoothly into existing machining processes. Contact Metav Werkzeuge for tailored cutting-data, batch availability and expert selection of Walter Tools Tiger·tec Gold inserts to match the production requirements of the operation Technical Data SKU: LNHU130625R-L55T-WPP35G-WALTER Designation: LNHU130625R-L55T WPP35G Product: Indexable milling insert (rectangular) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Corner radius: 2.5 mm Relief angle: 0° (negative) Shape: Rectangular Size: 13 Thickness code: 06 Tolerance class: H Special features Grade: WPP35G (coated cemented carbide) Chipbreaker: L55T Application: Steel (ISO P) Execution: U Series description: Coated carbide, Tiger·tec Gold; balanced wear and toughness FAQ What materials is this insert suitable for? The LNHU130625R-L55T WPP35G insert from Walter Tools is specified for steel (ISO P) applications and is formulated to handle the heat and chip characteristics typical of unalloyed and alloyed steels. How does the Tiger·tec Gold coating affect productivity? The Tiger·tec Gold coating on this insert enhances wear resistance and edge stability, which increases tool life and reduces the frequency of index changes, thereby improving overall productivity. What is the benefit of a 0° negative relief in milling? A 0° (negative) relief provides a stronger cutting edge and increased insert support in the pocket, which is beneficial for heavy and interrupted milling where edge robustness is required. How does the L55T chipbreaker improve machining? The L55T chipbreaker is designed to produce controlled chip segmentation when cutting steel, reducing chip entanglement and improving coolant access for stable cutting conditions. Can this insert be used for high-material-removal-rate operations? Yes; the combination of the rectangular form, 2.5 mm corner radius and the WPP35G grade makes the insert well suited to higher metal removal rates while maintaining edge security and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new merchandise from the manufacturer Walter Tools.
LNHU130625R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, a robust WSP45G grade and a sturdy 2.5 mm corner radius for reliable chip control and extended tool life; order the insert directly via Metav Werkzeuge or request application advice from our consultants. LNHU130625R-L55T WSP45G milling insert by Walter Tools — Tiger·tec Gold, negative 0° free angle LNHU130625R-L55T WSP45G is a rectangular indexable milling insert designed for heavy-duty and versatile milling applications in steels, stainless steels and heat-resistant alloys Tiger·tec Gold PVD coating WSP45G: versatile P/M/S grade Rectangular shape, 2.5 mm corner radius Negative 0° free angle for heavy cuts Faster cycle times through robust coating and grade The combination of the Tiger·tec Gold coating and the WSP45G grade provides a measurable advantage in productivity: the PVD-coated, wear-resistant cutting surface reduces flank wear and extends edge life, allowing for longer uninterrupted runs. The chemistry and layer design of the coating improve heat resistance and adhesion, which is particularly beneficial when machining steel and stainless steel where temperatures rise quickly. As a result, milling operations can run more consistently, with fewer insert changes and less unplanned downtime, supporting a more economical production flow. Consistent chip control and stable cutting performance Built with a dedicated chipbreaker L55T and a rectangular geometry, this insert promotes reliable chip formation across a range of cutting conditions. The 2.5 mm corner radius increases edge strength for interrupted cuts and roughing passes, while the negative 0° free angle gives a robust cutting edge suitable for higher engagement and material removal. Together, these features reduce the risk of built-up edge and brittle chipping, delivering improved surface quality and repeatable component tolerances—advantages that matter for batch production and tight machining windows. Precision fit and straightforward integration into existing toolholders Manufactured to tolerance class H, the insert meets high positional and dimensional standards, ensuring predictable seating and repeatable results in standard rectangular cutters. The designation and dimensions align with common ISO-compatible holders, simplifying tool management and inventory. Given the insert’s suitability for the ISO material groups P, M and S, it is a practical choice for shops handling mixed production—ranging from general structural steel components to corrosion-resistant and high-temperature alloy parts. Application guidance and selection advice for reliable results For roughing and semi-finishing on unalloyed or alloyed steel and stainless steel, the combination of WSP45G and Tiger·tec Gold delivers a balance of toughness and wear resistance. When machining titanium or nickel-based superalloys, moderate cutting parameters with active coolant and conservative feed per tooth help to maintain edge life and thermal stability. The insert’s chip control geometry supports a wider range of cutting depths; however, for critical component tolerances or unfamiliar alloys, a short trial under representative conditions is recommended to fine-tune spindle speed and feeds. If further specification data or cutting-parameter recommendations are required, our technical team can provide tailored guidance based on the specific machine, holder and workpiece material. Contact details and assistance are available to ensure the insert integrates smoothly into existing processes. For personalised application advice or to place an order for Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for fast technical support and reliable supply. Technical Data SKU: LNHU130625R-L55T-WSP45G-WALTER Article: LNHU130625R-L55T WSP45G Product type: milling insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Core Data Insert size: 13 mm Thickness: 06 Corner radius: 2.5 mm Free angle: 0° (negative) Tolerance class: H Special features Chipbreaker: L55T Shape: rectangular Execution: U Coating: Tiger·tec Gold (PVD) Material groups: P / M / S Suitable for: steel, stainless steel, heat-resistant superalloys and titanium FAQ What materials is this insert suitable for? The insert is formulated in the WSP45G grade and the Tiger·tec Gold coating, making it suitable for steel, stainless steel and heat-resistant superalloys/titanium in accordance with ISO 513 group assignments. How does the negative 0° free angle affect machining? A negative 0° free angle produces a stronger cutting edge and higher radial stability, which is advantageous for heavy cuts and interrupted milling where edge robustness is required. Which chipbreaker should be used for general roughing? The integrated chipbreaker L55T is optimised for consistent chip formation during roughing and semi-finishing, helping to avoid long stringy chips and improving evacuation in typical milling operations. Is the insert compatible with standard toolholders? Yes, the dimensions and tolerance class H ensure compatibility with ISO-standard rectangular milling holders that accept the stated insert size and thickness. Can this insert be used for finishing operations? While primarily designed for robustness and productivity, the insert can perform light finishing when combined with conservative feeds and fine depth of cut; for high-precision finishes, a dedicated finishing grade may be preferable. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation. There is no connection between our company and the named brands. The item offered is an original, brand-new article of the manufacturer.
LNHU130630R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the robust combination of Tiger‑tec Gold coating, the WKP35G carbide grade and a 0° negative rake for reliable roughing in steel and cast iron; order the LNHU130630R-L55T WKP35G directly via Metav Werkzeuge or ask our consultants if needed. LNHU130630R-L55T WKP35G milling insert — 0° negative rake for steel and cast iron, Walter Tools A LNHU130630R-L55T WKP35G milling insert engineered for high-process stability in machining of steel (P) and cast iron (K), suitable for demanding roughing and semi-finishing operations. Tiger‑tec Gold coated carbide grade WKP35G 0° negative rake for stable rough machining Rectangular insert with 3 mm corner radius Chipbreaker L55T for controlled chip formation Higher process stability for productive roughing The combination of the Tiger‑tec Gold coating and the WKP35G grade delivers a balanced performance that emphasises process stability and repeatable results when machining steel and cast iron. The insert’s negative rake at 0° reduces the tendency to dig in during heavy cuts, which translates into fewer interruptions and more consistent cycle times. Coated carbide provides a protective barrier against abrasive wear, so tool life is extended while surface integrity of the workpiece is preserved. Safer machining through controlled chip formation Equipped with the L55T chipbreaker and a 3 mm corner radius, the geometry promotes chip control that prevents long, entangling swarf and reduces the risk of re-cutting. Controlled chips improve throughput by lowering the need for secondary cleaning and minimising down-time caused by clogged tools or toolholders. For workshops prioritising uninterrupted production, the insert’s chip control contributes directly to operational efficiency. Cost-effective durability and consistent performance The coated carbide construction and the Tiger‑tec Gold technology are designed to offer reliable wear resistance under the thermal and mechanical loads typical for steel and cast-iron machining. This results in a longer effective cutting life and fewer insert changes over a production run, supporting better overall tool cost management. The product is produced to tolerance class H, ensuring dimensional consistency for repeatable tool set-ups and predictable machining results. Practical integration and application guidance The rectangular form and specification LNHU130630R-L55T make the insert straightforward to integrate into existing tool holders designed for this geometry. The grade is optimised for material groups P (steel) and K (cast iron) in accordance with ISO 513 principles — an explanation that helps planning of cut data: P grades are tuned for the heat and chip behaviour of steels, while K grades cope with the abrasive nature and brittle chips of cast iron. For specific cutting data and holder compatibility, refer to Metav Werkzeuge’s application support or catalogue resources. Contact Metav Werkzeuge for application advice and to arrange procurement of Walter Tools inserts; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: LNHU130630R-L55T-WKP35G-WALTER Article designation: LNHU130630R-L55T WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Core technical data Plate size: 13 Plate thickness: 06 Corner radius: 3 Free rake angle: 0° (negative) Tolerance class: H Special features Rectangular plate form Chipbreaker L55T Coated carbide (Tiger‑tec Gold) Material applicability: P / K (Steel / Cast iron) Execution: U FAQ What materials is this insert suitable for? The LNHU130630R-L55T WKP35G is specified for machining steel (P) and cast iron (K), benefiting from the Tiger‑tec Gold coating and WKP35G carbide grade. How does the 0° negative rake affect cutting performance? A 0° negative rake increases stability under heavy cuts, making the insert particularly suited to robust roughing operations where edge strength and reliable chip breaking are priorities. What is the purpose of the L55T chipbreaker? The L55T chipbreaker is designed to produce short, controllable chips and to reduce the risk of swarf entanglement, improving process security and reducing machine downtime. Can this insert be used for finishing passes? While optimised for roughing and semi-finishing, the insert can be employed for lighter passes if the tool geometry and cutting parameters are adjusted; consult Metav Werkzeuge for recommended cutting data. What does the WKP35G grade offer compared with other grades? WKP35G is a Walter Tools grade within the Tiger‑tec Gold family that balances wear resistance and edge robustness for a wide range of steels and cast irons, supporting consistent performance across production runs. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for clarification. There is no connection between our company and the named brands. The offered item is an original, factory-new product from the manufacturer Walter Tools.
LNHU130630R-L55T WPP35G WPP35G Wendeplatten - Walter Tools
Benefit from the combination of durable Tiger‑tec Gold coating, a grade tailored for steel machining and a secure chipformer that improves process stability; order originals via Metav Werkzeuge or consult our specialists for cutting data and integration advice LNHU130630R-L55T WPP35G — Milling insert for steel by Walter Tools The LNHU130630R-L55T WPP35G is a rectangular milling indexable insert designed for robust steel machining, offering high wear resistance and reliable chip control in industrial milling applications Tiger‑tec Gold coating for extended tool life Grade WPP35G optimised for steel machining L55T chipformer for secure chip control Rectangular geometry with 3 corner radius Faster, more reliable milling through improved wear resistance The combination of the Tiger‑tec Gold coating and the WPP35G grade delivers a measurable improvement in cutting-edge durability and repeatable performance when machining steels (ISO P). The coating reduces flank and crater wear, which translates into longer tool life and fewer insert changes, increasing productive milling time. For process engineers, this means a lower cost-per-part over medium- and long-run production and improved machine uptime. The insert’s coated carbide construction ensures consistent behaviour under typical steel cutting temperatures and repeated loading cycles. Stable chip control for safer, continuous operation A decisive practical benefit is the L55T chipformer, which actively shapes chips for controlled evacuation during shoulder and slot milling. Stable chip formation reduces the risk of entanglement and built-up edge, improving surface quality and lowering rework rates. The rectangular geometry and corner radius 3 combine to provide edge strength for interrupted cuts and superior surface finish in shoulder milling. The 0° (negative) clearance angle enhances robustness for demanding operations, favouring interrupted cuts and applications where a secure cutting edge is essential. Predictable integration into production workflows The insert’s form factor and tolerance class H ensure consistent seating and repeatable indexing in compatible toolholders, shortening setup times and simplifying inventory management. Because the grade is aimed at steel machining, cutting parameters are straightforward to adapt from existing ISO P strategies, enabling reliable cycle-time planning and process control. For teams requiring support with feed and speed selection or toolholder matching, technical consultancy is available to translate the insert’s specifications into optimal cutting data for specific machines and components. Contact Metav Werkzeuge for tailored cutting data and to secure original Walter Tools Tiger‑tec Gold inserts (SKU LNHU130630R-L55T-WPP35G) and application advice Technical data SKU: LNHU130630R-L55T-WPP35G-WALTER Label: Fräswendeschneidplatte LNHU130630R-L55T WPP35G Walter Tools Manufacturer: Walter Tools Product type: Milling insert / Fräswendeschneidplatte Grade: WPP35G Series: Tiger‑tec Gold Designation without grade: LNHU130630R-L55T ISO designation: LNHU130630R-L55T WPP35G Execution: U Chipformer: L55T Plate form: Rectangular Material group: P (steel) Tolerance class: H Edge radius: 3 Clearance angle: 0° (negative) Plate size code: 13 Plate thickness code: 06 Facts Plate size: 13 Corner radius: 3 Thickness code: 06 Clearance angle: 0° (negative) Special features Tiger‑tec Gold coating technology Coated carbide grade WPP35G Optimised for steel (ISO P) machining L55T chipformer for secure chip control Rectangular geometry for shoulder milling Tolerance class H for repeatable indexing Robust edge for interrupted cuts FAQ What materials is this insert best suited for? The LNHU130630R-L55T WPP35G insert is optimised for steels (ISO P); the WPP35G grade and Tiger‑tec Gold coating are tuned to the thermal and wear characteristics of steel machining. How does the L55T chipformer benefit production? The L55T chipformer produces short, controllable chips that reduce evacuation issues and the risk of built‑up edge, improving surface finish and process reliability when using the insert. Is the 0° (negative) clearance angle suitable for interrupted cuts? Yes, the 0° (negative) clearance provides added robustness and resistance to edge chipping, which is advantageous in interrupted or heavy milling operations. Can this insert be used in standard rectangular indexable holders? The rectangular geometry and tolerance class H support consistent seating in compatible toolholders; ensure the holder matches the designation LNHU130630R-L55T for correct fit and indexing. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Trademarks and trade names are the property of their respective owners. Brand names are used for identification and reference only. There is no affiliation between Metav Werkzeuge and the brand owners. The offered item is an original, factory‑new product from the stated manufacturer.
LNHU130630R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of robust cutting performance and wide material coverage for stable, productive milling cycles; the PVD-coated Tiger‑tec Gold grade delivers consistent edge life while the rectangular form with a 3 mm corner radius supports reliable chip control. Order directly via Metav Werkzeuge for availability and application advice. LNHU130630R-L55T WSP45G rectangular milling insert — Tiger‑tec Gold, for Steel/Stainless/Superalloys (Walter Tools) The LNHU130630R-L55T WSP45G is a rectangular milling insert engineered for stable, general‑purpose milling across steel, rostfreier Stahl and heat‑resistant superalloys, optimised for secure cutting and consistent surface quality Tiger‑tec Gold PVD coating for stable edges Designed for steel, stainless steel and superalloys Rectangular form with 3 mm corner radius 0° negative rake for secure cutting behaviour Proven coating and grade for demanding milling The combination of the Tiger‑tec Gold coating technology and the WSP45G cutting grade provides a predictable balance between tool life and cutting performance. Specifically developed as a PVD‑coated carbide grade, this insert copes well with the heat and adhesion tendencies encountered when machining steel, rostfreier Stahl and superalloys. The result is improved process stability and fewer unscheduled tool changes, which supports higher uptime on milling centres. Where consistent edge retention is required across mixed production batches, this grade offers a rational efficiency benefit by reducing tool‑change frequency and enhancing overall throughput. Geometry and chip control for secure cutting The rectangular plate profile, combined with a 3 mm corner radius and a 0° (negative) rake, results in a robust cutting edge that resists chipping under interrupted cuts and heavy engagement. The integrated L55T chipbreaker promotes controlled chip formation and evacuation, reducing the risk of re‑cutting and improving surface finish. With a plate thickness designation of 06 and tolerance class H, the insert supports stable clamping and repeatable positioning in pocketed toolholders. These geometric and tolerance choices translate directly into measurable production benefits: stable cutting forces, consistent part accuracy and reduced scrap rates. Versatile application and process advantages This indexable insert is suitable for a wide spectrum of milling tasks where productivity and process security are priorities. Its versatility across the ISO material groups P / M / S makes it a single‑grade solution for mixed‑material batches, cutting down tooling complexity and inventory. The rectangular format also enables straightforward indexing and economical use of insert edges. For process planners, the predictable wear behaviour of the Tiger‑tec Gold family supports better tool life planning and cost‑per‑part calculations, delivering a clear, rational case for adoption in both jobbing and serial production environments. Contact Metav Werkzeuge for tailored application support and availability of Walter Tools inserts, quoting SKU LNHU130630R-L55T-WSP45G, at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: LNHU130630R-L55T-WSP45G-WALTER Product type: milling insert Series: Tiger‑tec Gold Grade: WSP45G Manufacturer: Walter Tools Form: rectangular Designation: LNHU130630R-L55T Facts Tolerance class: H Free rake: 0° (negative) Corner radius: 3 mm Plate size: 13 Plate thickness: 06 Chipbreaker: L55T Special features PVD‑coated carbide (Tiger‑tec Gold) Material application groups: P / M / S Execution: U ISO designation: LNHU130630R-L55T WSP45G FAQ What materials is this insert suitable for? The LNHU130630R-L55T WSP45G insert is specified for ISO groups P, M and S, meaning it suits steel, rostfreier Stahl and heat‑resistant superalloys/titanium applications. How does the Tiger‑tec Gold coating affect performance? Tiger‑tec Gold provides improved edge stability and wear resistance for the WSP45G grade, extending effective cutting life under elevated temperatures and promoting reliable chip control. What does the 0° (negative) rake mean in practice? A 0° negative rake offers a more robust cutting edge that tolerates heavy engagements and intermittent cuts, reducing the likelihood of edge chipping during demanding milling operations. Is the L55T chipbreaker suitable for finishing operations? The L55T chipbreaker is engineered for effective chip control and consistent surface quality; it supports good finishing when cutting parameters are selected to match the material and desired surface specification. What does tolerance class H indicate for tool mounting? Tolerance class H denotes a precise manufacturing tolerance of the insert, supporting secure seating in the toolholder and repeatable positioning for accurate, repeatable machining results. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is the brand of Walter AG. The Walter AG (brand presentation: Walter Tools) is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation between Metav Werkzeuge and the named manufacturers.
LNHU130632R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent chip control and a robust negative-rake geometry to keep production running smoothly; order the insert directly via Metav Werkzeuge or consult the specialists for application-specific setup. LNHU130632R-L55T WKP35G milling indexable insert — Tiger‑tec Gold, for steel and cast iron | Walter Tools The LNHU130632R-L55T WKP35G is a rectangular milling insert engineered for productive machining of steel and cast iron, offering a coated‑carbide grade optimised for stable cutting and predictable tool life. Tiger‑tec Gold coating for extended life Suited to steel (P) and cast iron (K) machining Rectangular geometry with 3.2 mm corner radius Chipbreaker L55T for controlled chips Extended life from advanced coating technology The Tiger‑tec Gold coating combined with the WKP35G grade provides a balance of hardness and abrasion resistance that translates into longer tool life and fewer insert changes per shift. Designed as a coated carbide solution, this insert manages the heat and abrasive wear typical when machining steel and cast iron, reducing process interruptions. The result is improved overall equipment effectiveness and lower running costs for medium to high volume milling operations. Reliable chip control and cutting stability With the integrated chipbreaker L55T and a 0° negative rake geometry, chip formation is more consistent and secure, especially in heavy interrupted cuts or when dealing with the short, brittle chips of cast iron. The negative rake promotes a sturdy cutting edge and stable cutting forces, which helps maintain dimensional accuracy during longer cycles. This design supports predictable machining behaviour, aiding in cycle-time planning and scrap reduction. Geometry engineered for repeatable results The rectangular insert form and a 3.2 mm corner radius contribute to even wear distribution and robust edge strength across a range of milling tasks. The insert code and form (LNHU130632R-L55T) indicate the specific geometry and chip control features that simplify tool selection for standard toolholders. With tolerance class H and the plate size indicated as 13, the component integrates into established tool setups while offering the edge stability required for demanding production environments. Production benefits and workflow impact Selecting this insert supports a rational optimisation of machining campaigns: fewer tool changes, consistent surface finish and reduced downtime. The coated grade emphasises process reliability, while the combination of chip control and edge geometry helps protect machine spindle loads and fixture clamps. For operations prioritising throughput and repeatability when working with steel and cast iron, this insert offers a practical, performance‑oriented option from a recognised brand. Contact Metav Werkzeuge for a tailored recommendation on the Walter Tools Tiger‑tec Gold LNHU130632R-L55T WKP35G insert and to discuss stocking options for upcoming production runs. Technical data Article number: LNHU130632R-L55T-WKP35G-WALTER Product: Fräswendeschneidplatte / Milling indexable insert Manufacturer: Walter Tools Core dimensions Corner radius: 3.2 mm Plate size: 13 Plate thickness: 06 Free angle: 0° (negative) Tolerance class: H Special features Series: Tiger‑tec Gold Grade: WKP35G (coated carbide) Chipbreaker: L55T Shape: Rectangular Material applicability: Steel (P), Cast iron (K) FAQ What materials is this insert suitable for? The insert is specified for steel (P) and cast iron (K) machining; the WKP35G grade and Tiger‑tec Gold coating are optimised for these material groups. How does the L55T chipbreaker improve machining? The L55T chipbreaker promotes controlled chip formation and evacuation, improving stability in milling tasks and reducing the risk of built‑up edge when machining steel and cast iron. What does the 0° negative rake mean for cutting performance? A 0° negative rake gives a robust cutting edge that tolerates higher cutting forces and interruptions, enhancing edge life and dimensional consistency in heavy or interrupted milling. Can this insert be used for finishing and roughing? Yes; the combination of a 3.2 mm corner radius and the WKP35G grade makes the insert suitable for a mix of roughing and semi‑finishing operations where edge strength and wear resistance are required. Is the LNHU130632R-L55T WKP35G compatible with standard rectangular toolholders? The rectangular form and coded geometry align with common toolholder standards for milling inserts; please verify holder compatibility with the insert code before assembly. Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only; there is no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, brand‑new product from the stated manufacturer. Walter Tools / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
LNHU130632R-L55T WPP35G Wendeplatten - Walter Tools
Take advantage of durable Tiger·tec Gold performance and a robust chipbreaker geometry to increase machining uptime and reduce tool changes; the rectangular insert combines a 0° negative relief and 3.2 corner radius for reliable edge strength in steel operations. Order the LNHU130632R-L55T WPP35G directly via Metav Werkzeuge or ask our consultants if needed. LNHU130632R-L55T WPP35G rectangular milling insert — Tiger·tec Gold, for steel machining (Walter Tools) The LNHU130632R-L55T WPP35G is a rectangular milling indexable insert designed for productive steel machining, optimised for stable chip control and long tool life. Tiger·tec Gold coated for extended life Optimised for steel (ISO P) machining 0° negative relief for process stability 3.2 corner radius for strong cutting edges Prolonged tool life through advanced coating technology The combination of Tiger·tec Gold coating and the WPP35G grade delivers a balanced performance between wear resistance and toughness. This coated carbide grade is developed for the thermal and mechanical demands of machining steel, offering improved resistance to flank wear and stable edge life under typical cutting conditions. As a result, cycle times remain consistent and tool change frequency is reduced, which supports predictable production planning and lowers overall machining cost per component. Geometry that ensures stable cutting and chip control The insert’s L55T chipbreaker and rectangular form create controlled chip formation and evacuation, which is essential for uninterrupted productivity on milling machines. The 0° (negative) relief angle increases support behind the cutting edge and reduces vibration in heavy cuts. Combined with a corner radius of 3.2, the geometry provides a favourable balance between edge strength and surface finish, making the insert suitable for moderate to heavy roughing where robustness is required. Specifically tailored for steel applications (ISO P) Developed for the demands of ISO P materials, the WPP35G grade is formulated to handle the heat and chip behaviour typical of steels, from unalloyed to alloyed grades. The insert’s grade and geometry reduce the risk of built-up edge and provide dependable performance across a broad range of cutting conditions, supporting stable processes in both job-shop and production environments. This makes the insert a pragmatic choice when consistent results and predictable tool life are priorities. Practical benefits for the workshop and process planners With a compact rectangular design and clear specification, the insert simplifies tool selection and inventory management. The standardised designation and series information enable straightforward integration into existing tool systems and machining strategies. Because the cutting concept focuses on longevity and repeatability rather than maximising a single performance metric, the component supports continuous production and fewer interruptions for insert replacement. Contact Metav Werkzeuge for tailored application advice and to source original Walter Tools Tiger·tec Gold inserts for reliable steel machining Technical data Article number: LNHU130632R-L55T-WPP35G-WALTER Label: Fräswendeschneidplatte LNHU130632R-L55T WPP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Facts Corner radius: 3.2 Relief angle: 0° (negativ) Plate size: 13 Chipbreaker: L55T Plate thickness: 06 Tolerance class: H Special features Grade: WPP35G Coating: Tiger·tec Gold coated hardmetal Shape: Rechteck Execution: U Material designation: P (suitable for steel) ISO designation: LNHU130632R-L55T WPP35G FAQ What materials is this insert suitable for? This insert is specified for machining steel (ISO P); the WPP35G grade and Tiger·tec Gold coating are tuned to the thermal and chip-formation characteristics of steel. How does the 0° negative relief affect machining? The 0° negative relief provides greater support behind the cutting edge, improving stability in interrupted or heavy milling cuts for the LNHU130632R-L55T WPP35G insert. What is the purpose of the L55T chipbreaker? The L55T chipbreaker on this insert promotes controlled chip formation and evacuation, reducing the likelihood of long, tangled chips and supporting continuous milling cycles. Can this insert be used for finishing operations? While the insert is optimised for robust steel machining, its corner radius and geometry can deliver acceptable surface quality; application parameters should be adapted for finishing cuts. Is the insert part of a recognised series or coating technology? Yes, the insert belongs to the Tiger·tec Gold series, and the WPP35G coated carbide grade is designed for wear resistance and process reliability in steel machining. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are cited for explanation and identification only; there is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
LNHU130632R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
High-performance Tiger·tec Gold grade delivers a robust cutting edge and reliable chip control for a wide range of materials (steel, stainless steel and heat-resistant alloys); combined with a 0° negative rake and 3.2 mm corner radius, the insert supports heavy milling and extended tool life. Order this milling indexable insert directly via Metav Werkzeuge or ask the consultants for application support. LNHU130632R-L55T WSP45G — Milling indexable insert (Tiger·tec Gold) by Walter Tools A LNHU130632R-L55T WSP45G milling indexable insert engineered for productive face and slot milling across steel, stainless steel and superalloys. Tiger·tec Gold PVD coating Versatile for Steel, Stainless, Superalloys 0° negative rake for heavy cuts 3.2 mm corner radius for edge strength Increased machining throughput and stable edge life The combination of the WSP45G grade and the Tiger·tec Gold coating focuses on process reliability and consistent component finish when machining demanding materials. Designed as a PVD-coated cemented carbide grade for milling, this insert provides a balance between toughness and wear resistance that is particularly effective when cutting steels and alloys that generate heat and tend to work-harden. The coating promotes stable cutting edges, reducing the frequency of index changes and supporting longer uninterrupted machining cycles — a direct contribution to reduced cycle times and higher throughput on production lines. Predictable chip control and reduced downtime Built with the L55T chipbreaker and a 0° negative rake, the insert offers controlled chip formation even under interrupted cuts and varying engagement angles. The substantial 3.2 mm corner radius increases edge strength and resistance to mechanical overload, which translates into fewer unexpected tool failures and lower rework rates. For operators less familiar with chipbreaker nomenclature: the L55T geometry shapes the chips to evacuate reliably and minimise entanglement, thereby helping to keep coolant passages clear and machine downtime to a minimum. Broad material capability and recommended use cases The insert is specified for the ISO groups P / M / S, meaning suitability for unalloyed and alloyed steel, stainless steel and heat-resistant superalloys and titanium. Its rectangular form and thickness code provide a stable seating in milling cutters for heavy-duty roughing and medium finishing operations. The tolerance class H and execution U indicate manufacturing and dimensional standards that support repeatable clamping and indexing. Where a progressive increase in feed or depth of cut is required, the combination of the negative rake and large corner radius encourages secure performance and predictable tool life in demanding production scenarios. For tailored machining advice or to request a quotation for this Tiger·tec Gold milling insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LNHU130632R-L55T-WSP45G-WALTER Designation: LNHU130632R-L55T WSP45G Manufacturer: Walter Tools Dimensions & core data Plate size: 13 Corner radius: 3.2 mm Free cutting angle: 0° (negative) Thickness code: 06 Tolerance class: H Materials & features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated cemented carbide) Chipbreaker: L55T Shape: Rectangle Execution: U Applicable material groups: Steel, Stainless steel, Superalloys/Titanium Material designation: P / M / S FAQ Which materials can be machined with this insert? The LNHU130632R-L55T WSP45G milling indexable insert by Walter Tools is suitable for ISO groups P / M / S, i.e. typical steels, rostfreier Stahl (stainless steel) and heat-resistant superalloys including titanium. What is the purpose of the 0° negative rake on this grade? A 0° negative rake improves edge strength under heavy cutting conditions; the LNHU130632R-L55T WSP45G insert therefore resists chipping and performs reliably during interrupted or heavy-engagement milling. How does the L55T chipbreaker affect chip evacuation? The L55T chipbreaker shapes chips for dependable evacuation and reduced entanglement, supporting continuous production and helping to maintain coolant and chip-conveyor efficiency when using the Walter Tools insert. Is the insert suitable for roughing and finishing? Yes. The combination of a robust 3.2 mm corner radius and Tiger·tec Gold wear resistance makes this insert appropriate for heavy roughing and for medium finishing passes where edge integrity and surface quality are required. Which designation should be quoted when ordering? Quote the full designation LNHU130632R-L55T WSP45G and the SKU LNHU130632R-L55T-WSP45G-WALTER to ensure the correct Tiger·tec Gold grade and chipbreaker configuration are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU160708R-L55T WKK25G Wendeplatten - Walter Tools
High process reliability and extended tool life result from the combination of the Tiger·tec Gold coating and the WKK25G grade, optimised for abrasive cast iron machining; the rectangular 16 mm insert with a 0.8 mm corner radius and 0° negative rake delivers stable chip control and consistent surface quality. Order the LNHU160708R-L55T WKK25G directly via Metav Werkzeuge or ask our consultants if needed. LNHU160708R-L55T WKK25G – rectangular milling indexable insert, 16 mm, Tiger·tec Gold (Walter Tools) LNHU160708R-L55T WKK25G is a rectangular milling insert engineered for efficient machining of cast iron, combining a wear-resistant coating and a chipformer tailored to brittle chips. Tiger·tec Gold coating for wear resistance Optimised for cast iron (ISO K) machining 16 mm rectangular format, 0.8 mm radius 0° negative rake for stable cutting Higher productivity on abrasive cast iron The combination of the Tiger·tec Gold coating and the WKK25G grade provides a targeted response to the abrasive nature of cast iron. The grade is a coated carbide formulation designed to resist abrasive wear while maintaining a robust cutting edge; this reduces flank wear and extends the usable life of the insert. For operations where short, brittle chips dominate, the geometry and coating work together to prolong uptime and lower tooling costs, delivering measurable productivity gains in series production. Stable cutting geometry for repeatable surface finish The rectangular insert geometry and a 0.8 mm corner radius ensure a predictable contact area and improved edge stability during milling. The 0° negative rake supports secure engagement in interrupted cuts, reducing chatter and maintaining a repeatable surface quality across multiple indexings. Such stability benefits both roughing and light finishing passes where consistent dimensional results and surface integrity are required in cast iron components. Controlled chip formation and process security The integrated L55T chipbreaker is optimised for the short, breaking chips typical of cast iron (ISO K). The chipformer promotes reliable chip evacuation and prevents chip packing at the cutter periphery, which in turn safeguards the cutting edge and the workpiece finish. This technical design increases process security and simplifies cycle planning, especially on operations with variable engagement or intermittent contact. Practical advantages and application notes As a coated indexable insert, the component facilitates quick indexing and cost-effective reconditioning of the cutting edge, supporting lean tool management. The rectangular 16 mm format allows compact pocket designs and multiple effective cutting edges per insert. Given its focus on cast iron, the grade offers a balanced combination of wear resistance and edge robustness, making it suitable for continuous production runs where consistent tool life and surface quality are priorities. For specific application advice, batch availability or to request a specification sheet for the Walter Tools LNHU160708R-L55T WKK25G insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: LNHU160708R-L55T-WKK25G-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Series: Tiger·tec Gold Grade: WKK25G Manufacturer: Walter Tools Facts Insert size: 16 Thickness code: 07 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: H Special features Coating: Tiger·tec Gold Chipbreaker: L55T Shape: Rectangular Suitable for: cast iron (ISO K) Base material type: coated carbide FAQ Which materials is this insert intended for? The LNHU160708R-L55T WKK25G insert from Walter Tools is intended primarily for machining cast iron (ISO K), with its grade and coating tuned to resist abrasive wear typical of those materials. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the LNHU160708R-L55T WKK25G increases wear resistance and improves edge life, leading to longer intervals between indexings and more consistent production output. How does the L55T chipbreaker affect machining? The L55T chipbreaker promotes the formation of short, controlled chips during milling of cast iron, aiding chip evacuation and reducing the risk of chip-related edge damage with the LNHU160708R-L55T WKK25G insert. Is the 0° negative rake suitable for interrupted cuts? Yes, the 0° negative rake geometry contributes to stable engagement and resistance to mechanical shock, making the insert well suited to interrupted milling operations in cast iron. What are the key dimensional features to check when selecting a pocket? Verify the rectangular 16 mm format, the thickness code 07 and the 0.8 mm corner radius to ensure correct seating and clamping for the LNHU160708R-L55T WKK25G insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names remain the property of their respective owners. Brand names and trademarks are mentioned for clarification only; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product from Walter Tools.
LNHU160708R-L55T WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for consistent wear resistance and broad material coverage; the rectangular insert with L55T chipbreaker and a 0° negative rake provides stable chip control for steel and cast iron — order through Metav Werkzeuge or request application support from our consultants. LNHU160708R-L55T WKP25S rectangular milling insert, Tiger·tec Silver coating, for steel and cast iron (Walter Tools) LNHU160708R-L55T WKP25S is a rectangular indexable milling insert designed for productive milling operations in steel and cast iron applications Tiger·tec Silver coated carbide Suitable for steel and cast iron Rectangular form, 0.8 mm corner radius L55T chipbreaker for controlled chips Reliable performance for steel and cast iron machining The Tiger·tec Silver coating combined with the WKP25S grade is engineered to deliver improved wear resistance and thermal stability during continuous milling. This combination mitigates surface degradation at higher cutting temperatures, enabling longer tool life and more predictable results in serial production. Because the grade is optimised for both P (steel) and K (cast iron) groups according to ISO designations, the insert maintains consistent flank and crater wear behaviour when switching between these common engineering materials. The result is a measurable reduction in tool changes and process interruptions, improving throughput without sacrificing component quality. Geometry and chip control that support productivity The insert's rectangular form and the L55T chipbreaker generate consistent chip shapes, reducing the risk of entanglement and improving evacuation in both interrupted and continuous cuts. With a corner radius of 0.8 mm, the geometry balances edge strength and surface finish quality, while the 0° negative rake supports stable cutting in tougher engagement conditions. The tolerance class H ensures repeatable fit and seating in standard toolholders, which reduces setup variation and contributes to reproducible machining accuracy. These tangible geometry features translate into fewer reworks and a steadier production rhythm. Process security and economical machining Designed for industrial use, the insert promotes process security through stable cutting-edge behaviour and predictable wear progression. The WKP25S grade, part of the Tiger·tec Silver series, is aimed at wide-ranging applications where both abrasion resistance and edge toughness are required, making it suitable for mixed production environments. Using this insert can lower the overall cost per component by extending effective tool life and by reducing unplanned downtime. For production planners, these advantages mean improved scheduling reliability and clearer cost forecasting. Contact Metav Werkzeuge for application advice and availability of the Walter Tools LNHU160708R-L55T WKP25S insert; technical queries by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: LNHU160708R-L55T-WKP25S-WALTER Designation: LNHU160708R-L55T WKP25S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Core data Size: 16 Thickness code: 07 Corner radius: 0.8 mm Free cutting face angle: 0° (negative) Tolerance class: H Chipbreaker: L55T Material suitability: P / K Features Rectangular insert form Coating: Tiger·tec Silver Grade: WKP25S (coated carbide) Execution: U Plate thickness: 07 Plate size: 16 Corner radius code: 0,8 Applicable for steel and cast iron FAQ What materials is the insert suitable for? The insert is suitable for steel and cast iron machining; the WKP25S grade and Tiger·tec Silver coating provide balanced wear resistance and toughness for these material groups. How does the L55T chipbreaker affect machining? The L55T chipbreaker promotes controlled chip formation and efficient evacuation, which supports consistent surface finish and reduces the risk of chip-related interruptions during milling. Can this insert be used in heavy-duty interrupted cuts? With a 0° negative rake and a 0.8 mm corner radius, the insert offers enhanced edge strength and stability suitable for many interrupted cutting scenarios; toolholder and machine rigidity should be assessed for specific heavy-duty applications. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presentation: Walter Tools) is part of the Sandvik group and is recognised as a leading manufacturer of precision cutting tools for metalworking. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification purposes only and do not indicate any affiliation between our company and the trademark owners. The item offered is an original, factory-new product of the stated manufacturer.
LNHU160708R-L55T WKP35G Wendeplatten - Walter Tools
Benefit from the Tiger·tec Gold technology and the WKP35G grade to achieve consistent tool life and reliable chip control in steel and cast iron milling operations; the robust L55T chipbreaker and 0° negative relief deliver stable engagement and reproducible results—order directly via Metav Werkzeuge or contact a consultant for application advice. LNHU160708R-L55T WKP35G milling insert — Tiger·tec Gold, rectangular, Walter Tools The LNHU160708R-L55T WKP35G is a rectangular milling insert engineered for productive machining of steel and cast iron in serial and job-shop environments, combining a modern coated carbide grade with a controlled chipbreaker for repeatable results Tiger·tec Gold coating for extended tool life WKP35G grade optimised for steel and cast iron 0° negative relief for secure cutting engagement 0.8 mm corner radius for consistent edge strength Greater productivity through optimised grade and coating The combination of Tiger·tec Gold and the WKP35G grade focuses on high productivity and predictable wear behaviour when machining ISO group P (steel) and K (cast iron) materials. The coating system reduces flank wear and increases resistance to abrasive attack, while the substrate maintains toughness under typical milling loads. The integrated L55T chipbreaker improves chip separation and lowers heat concentration at the cutting edge, which results in longer intervals between indexings and fewer unplanned tool changes. For production planners this translates directly into improved machine uptime and lower per-part tooling cost. Stable cutting geometry for repeatable results A 0° negative relief geometry provides a stable cutting face ideal for interrupted cuts or applications with variable engagement. The 0.8 mm corner radius increases edge strength and reduces susceptibility to chipping under heavy feed, making the insert suitable for medium to heavy roughing passes. The rectangular form offers multiple effective cutting edges per index, and the plate thickness designation supports axial and radial rigidity in common milling holders. These geometric choices aim to deliver consistent surface quality and predictable tool life in everyday shop-floor conditions. Practical machining behaviour and process recommendations The insert is specified for machining steel and cast iron; the chipbreaker design helps produce short to segmented chips typical of these materials, reducing the risk of entanglement and improving evacuation. When using the insert, select cutting data that balances feed per tooth and cutting speed for the workpiece grade—prioritise stable clamping and appropriate coolant strategy where applicable. The controlled combination of grade and chipformer reduces thermal load at the cutting edge, enabling higher metal removal rates without sacrificing component tolerances. Operators will appreciate the straightforward performance characteristics during set-up and process validation. Reliability and workshop-level advantages Workshops seeking a balance of process security and cost-effectiveness gain from the repeatable performance of the Tiger·tec Gold family and the WKP35G grade. The insert supports predictable wear mechanisms, eases tool management, and aligns with modern manufacturing demands for throughput and consistent part quality. The Walter Tools pedigree behind this product underpins expectations of stable edge preparation and reliable batch-to-batch consistency, making it a pragmatic choice for operations focused on uptime and reproducibility. Contact Metav Werkzeuge for specific recommendations on clamping systems and cutting data for Walter Tools Tiger·tec Gold inserts and ensure optimal integration into existing production processes Technical Data Article number: LNHU160708R-L55T-WKP35G-WALTER Label: Fräswendeschneidplatte LNHU160708R-L55T WKP35G Walter Tools Product type: Fräswendeschneidplatte (milling insert) Facts Corner radius: 0.8 mm Plate size: 16 Plate thickness: 07 Relief angle: 0° (negative) Tolerance class: H Special features Series: Tiger·tec Gold Grade: WKP35G Chipbreaker: L55T Plate form: Rectangular Material suitability: P / K (steel and cast iron) Execution: U FAQ What materials is this insert designed for? The LNHU160708R-L55T WKP35G insert is designed primarily for ISO material groups P (steel) and K (cast iron), with the WKP35G grade and Tiger·tec Gold treatment optimised for these workpiece types. How does the L55T chipbreaker affect machining? The L55T chipbreaker provides controlled chip formation for short to segmented chips typical of steel and cast iron, improving chip evacuation and reducing heat concentration at the cutting edge. Why is a 0° negative relief useful in milling? A 0° negative relief increases contact stability at the cutting edge, making the insert less sensitive to interruption and fluctuation in engagement and thus enhancing process security. What advantages does the Tiger·tec Gold series provide? The Tiger·tec Gold series offers an advanced coating-substrate combination that improves wear resistance and edge stability, resulting in longer tool life and consistent performance during production. Can the insert be used for finishing and roughing operations? Yes; the 0.8 mm corner radius and robust chipformer make the insert suitable for medium to heavy roughing while still providing adequate control for certain semi-finish applications when the process is parameterised accordingly. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names belong to their respective owners and are mentioned for clarification only. There is no connection between our company and the mentioned brands beyond product distribution. The offered item is an original, brand-new product from the manufacturer.
LNHU160708R-L55T WKP35S Wendeplatten - Walter Tools
Reliable, process-oriented performance from the Tiger‑tec Silver grade and the WKP35S cutting material, combined with a 0.8 mm corner radius and a negative 0° relief, provides predictable chip control when machining steel and cast iron; order the LNHU160708R-L55T WKP35S milling insert directly via Metav Werkzeuge or consult our technical team for cutting-parameter recommendations. LNHU160708R-L55T WKP35S milling insert (rectangle, 16 mm) – Walter Tools, Tiger‑tec Silver The LNHU160708R-L55T WKP35S is a rectangular milling insert engineered for efficient machining of steel (P) and cast iron (K), featuring a dedicated chipbreaker and a negative 0° relief for robust cutting. Tiger‑tec Silver coated grade WKP35S Optimised chipbreaker L55T for stability Rectangle form, 16 mm for versatile milling 0.8 mm corner radius for consistent edge life Longer tool life through a proven grade The Tiger‑tec Silver coating and the WKP35S grade combine to deliver enhanced wear resistance and stable edge behaviour when machining demanding materials. Designed as a coated carbide solution, this grade balances toughness and hardness to reduce flank and crater wear in continuous and interrupted milling. For production environments where process repeatability matters, the coated grade reduces the frequency of tool changes and contributes to steady component quality across long batches. Predictable chip control and cutting mechanics The insert’s L55T chipbreaker and 0° (negative) relief are intended to promote controlled chip formation and to protect the cutting edge during heavy or interrupted cuts. A 0.8 mm corner radius supports durable edges and improved surface finish while minimising edge chipping in roughing passes. The rectangular geometry and 16 mm nominal size enable stable clamping in standard milling cutters, which helps maintain concentricity and reduces vibration for more consistent machining results. Practical selection and application guidance This indexable insert is specified for the ISO groups P (steel) and K (cast iron), making it suitable for a wide range of general milling tasks from semi‑finishing to more aggressive roughing where edge strength is required. The tolerance class H indicates manufacturing accuracy suitable for standard industrial applications. For specific cutting speeds and feeds, pairing the grade with coolant strategies and appropriate tool-holding will maximise productivity and workpiece quality. For assistance on selection or to confirm suitability for a particular machine or workpiece, Metav Werkzeuge’s consultants can advise on matching the insert to the cutter body and machining conditions. Contact Metav Werkzeuge for tailored recommendations on using this Walter Tools insert in production—email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed cutting data and availability Technical Data SKU: LNHU160708R-L55T-WKP35S-WALTER Name: LNHU160708R-L55T WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Facts Size: 16 mm Thickness: 07 Corner radius: 0.8 mm Relief angle: 0° (negative) Tolerance class: H Special features Grade: WKP35S Coating: Tiger‑tec Silver (coated carbide) Material suitability: P / K (steel / cast iron) Chipbreaker: L55T Shape: Rectangle Execution: U FAQ Which materials can be machined with this insert? The LNHU160708R-L55T WKP35S insert from Walter Tools is formulated for ISO material groups P and K, i.e. steels and cast iron, providing a balance of wear resistance and edge stability for these materials. What benefit does the 0.8 mm corner radius provide? A 0.8 mm corner radius increases the insert’s edge strength and improves surface finish compared with very small radii, reducing the risk of premature chipping during heavier milling operations. How does the L55T chipbreaker influence performance? The L55T chipbreaker promotes controlled chip formation and evacuation, which improves process stability and reduces the likelihood of entangling chips or inconsistent chip loads on the cutter. What does a 0° (negative) relief mean in practice? A negative 0° relief produces a robust cutting geometry with a stronger cutting edge, making the insert well suited to interrupted cuts and applications where edge security is a priority. Is this insert suitable for both finishing and roughing operations? Yes. The grade and geometry offer a compromise between toughness and wear resistance that suits semi‑finishing and roughing, provided the cutter body and clamping system are compatible with a rectangular 16 mm insert. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product from the manufacturer.
LNHU160708R-L55T WPP35G WPP35G Wendeplatten - Walter Tools
The combination of Tiger·tec Gold coating and the WPP35G carbide grade delivers reliable tool life and consistent chip control for steel machining; pair this with the negative 0° geometry and 0.8 mm corner radius for stable, vibration-resistant milling. Order directly via Metav Werkzeuge or consult the team for application-specific recommendations. LNHU160708R-L55T WPP35G – Indexable milling insert, Tiger·tec Gold, Walter Tools LNHU160708R-L55T WPP35G is a rectangular indexable milling insert designed for high-process security in steel machining, combining a coated carbide grade with a stabilising chipbreaker for productive milling applications Tiger·tec Gold coating for extended tool life Optimised for ISO P (steel) machining 0.8 mm corner radius for increased robustness Negative 0° geometry for vibration stability High process security for steel machining The combination of the WPP35G coated carbide and the Tiger·tec Gold series is engineered for consistent performance when machining steel. The grade is formulated to manage the heat and chip formation typical of ISO group P materials, enabling steady cutting conditions and predictable tool life. The insert’s coating reduces wear on the cutting edge and improves resistance to abrasive and adhesive mechanisms, resulting in fewer tool changes and higher machine uptime. Geometry and chip control that improve stability With a negative 0° relief and an integrated L55T chipbreaker, the insert provides a secure cutting edge and controlled chip formation during heavy or interrupted cuts. The 0.8 mm corner radius increases edge strength, reducing the risk of chipping under higher feed rates and slight tool deflection. This geometry helps maintain surface finish consistency and reduces the likelihood of vibration-related marks on the workpiece, which is especially relevant in demanding production environments. Productivity advantages and economical use The rectangular form and multi-edged design of the insert support efficient indexation and repeatable positioning, which minimises downtime during tool changes. As a coated carbide solution targeted at steel, the insert is suitable for a range of cutting conditions from general-purpose to moderately abrasive operations. The result is an attractive balance of processing reliability and cost-effectiveness for batch and series production where consistent component quality and tool life are essential. For specific cutting data, application advice or to request tailored recommendations for machining steel with this Walter Tools insert, contact Metav Werkzeuge for expert guidance and available stock details. Technical Data Article number: LNHU160708R-L55T-WPP35G-WALTER SKU: LNHU160708R-L55T-WPP35G-WALTER Product type: Fräswendeschneidplatte (indexable milling insert) Brand: Walter Tools Grade: WPP35G Facts Plate size: 16 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate thickness: 07 Tolerance class: H Special features Series: Tiger·tec Gold Coating: coated carbide (WPP35G) Shape: rectangular Chipbreaker: L55T Material suitability: steel (ISO P) Execution: U FAQ What materials is this insert best suited for? This insert is designed primarily for steel (ISO P); the WPP35G grade and Tiger·tec Gold coating are optimised for the heat and chip characteristics of unalloyed and alloyed steels. How does the negative 0° geometry affect machining? Negative 0° relief offers a robust cutting edge and improved vibration resistance, making this insert suitable for stable, heavy-duty milling operations with good surface finish control. Can the insert be indexed to use multiple cutting edges? Yes, the rectangular design allows indexation to expose fresh edges, improving utilisation of the insert and reducing overall tooling costs. What advantage does the 0.8 mm corner radius provide? A 0.8 mm corner radius strengthens the cutting edge, reduces chipping risk and supports higher feed rates while maintaining component surface quality. Is this insert part of a coated series and what does that mean for wear? The insert belongs to the Tiger·tec Gold series; the coating improves resistance to abrasion and extends tool life compared with uncoated grades. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and indicate no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from Walter Tools.
LNHU160708R-L55T WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold performance and the WSM35G grade for reliable machining of stainless steels and heat‑resistant superalloys; the robust geometry and controlled chip formation support consistent productivity and predictable tool life. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. Milling indexable insert LNHU160708R-L55T WSM35G – 0° negative relief, 0.8 mm corner radius · Walter Tools LNHU160708R-L55T WSM35G is a compact milling insert designed for heavy and demanding materials, primarily for machining stainless steels and high‑temperature superalloys in productive milling operations Tiger·tec Gold coating for heat resistance WSM35G grade for stainless and superalloys Rectangular form with 0.8 mm corner radius Negative relief 0° for stable cutting L55T chipbreaker for controlled chips High productivity when machining tough materials The combination of the Tiger·tec Gold coating and the WSM35G carbide grade delivers a process‑orientated cutting solution that resists thermal loading during continuous milling. This indexable solution is optimised for stainless steels and superalloys, where high cutting temperatures and adhesive wear threaten edge stability. The coated grade improves heat resistance and reduces the risk of built‑up edge, enabling longer effective tool life and fewer interruptions for tool change, which in turn supports predictable cycle times and higher overall output. Coating and grade engineered for edge stability A premium coating system on the insert enhances substrate protection and wear resistance, addressing common failure modes in demanding alloys. The stable cutting edge created by the coating and substrate pairing allows for secure chip formation under elevated thermal loads. With the integrated chipbreaker designation L55T, the insert controls swarf behaviour to avoid recutting and minimise surface damage, supporting consistent component quality and reduced downtime for chip management. Robust geometry for repeatable results and easy handling The rectangular plate geometry with a 0.8 mm corner radius and a 0° negative relief provides a balance between strength and surface finish, making the insert suitable for interrupted cuts and heavy feed conditions. The thickness code and execution ensure mechanical rigidity in the tool pocket, while the L55T chipbreaker promotes short, segmented chips during heavy milling. These geometric features translate into lower vibration sensitivity and repeatable machining results on demanding workpieces, simplifying process setup and safeguarding output quality. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts for optimised milling of stainless steels and superalloys; Metav Werkzeuge provides application advice and fast delivery to support continuous production. Technical Data SKU: LNHU160708R-L55T-WSM35G-WALTER Article designation: LNHU160708R-L55T WSM35G Product type: Milling indexable insert Brand: Walter Tools Core measurements Plate size: 16 Corner radius: 0.8 mm Relief angle: 0° (negative) Plate thickness code: 07 Tolerance class: H Design & compatibility Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: L55T Plate form: Rectangular Execution: U Suitable material groups: S (superalloys, titanium), M (stainless steels) FAQ Which materials is this insert suitable for? The LNHU160708R-L55T WSM35G insert is designed for stainless steels and heat‑resistant superalloys, addressing the thermal and adhesion challenges typical of these material groups. What benefits does the WSM35G grade deliver? WSM35G, in combination with the Tiger·tec Gold coating, offers improved heat resistance and a stable cutting edge, which enhances tool life and process reliability for demanding milling tasks. How does the L55T chipbreaker affect machining? The L55T chipbreaker on this insert promotes controlled chip formation, reducing the risk of recutting and supporting consistent surface quality and safer swarf management. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
LNHU160708R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WSP45G grade for durable, versatile milling; the L55T chipbreaker and 0.8 mm corner radius deliver stable chip control and consistent surface quality. Order directly via Metav Werkzeuge or consult their specialists for tailored application advice. LNHU160708R-L55T WSP45G rectangular milling indexable insert, Tiger·tec Gold, Walter Tools A LNHU160708R-L55T WSP45G milling insert designed for versatile milling of steel, stainless steel and heat‑resistant alloys with optimised chip control for stable, repeatable machining. Tiger·tec Gold PVD coating for long tool life Grade WSP45G for P, M and S materials Rectangular 16 size with 0.8 mm corner radius Negative 0° rake with L55T chipbreaker Durable grade and coating for reliable machining The combination of the WSP45G grade within the Tiger·tec Gold family and a PVD‑coated carbide substrate provides a robust solution for demanding milling tasks. This formulation is engineered to resist wear and thermal degradation while maintaining a stable cutting edge, which translates into longer effective tool life and fewer changeovers on the shop floor. For metallurgically diverse production runs, the WSP45G grade supports consistent performance across steel, stainless steel and heat‑resistant alloys, reducing the need for frequent grade changes. Geometry that improves surface finish and repeatability The insert’s rectangular format with a 0.8 mm corner radius and tolerance class H delivers a reliable cutting geometry that supports consistent part quality. A small corner radius reduces radial cutting forces and helps attain improved surface finish when milling shoulders or light finishing passes, while the negative 0° rake enhances edge strength during interrupted cuts. These design choices result in predictable machining behaviour and make the indexable plate suitable for both roughing and semi‑finishing operations where repeatability is essential. Optimised chip control for secure production The integrated L55T chipbreaker is configured to produce manageable chip shapes under a wide range of cutting conditions, lowering the risk of entanglement and promoting continuous material removal. For materials prone to long, stringy chips—such as certain stainless steels and superalloys—this chipbreaker contributes to safer handling and reduced cycle interruptions. The combined effect of chip control and a stable grade supports higher process reliability and fewer unplanned stops, improving overall throughput. Productivity advantages and application flexibility As a compact, rectangular milling insert, this component simplifies tooling logistics while enabling adaptable milling strategies across multiple workpiece materials. The insert’s construction supports elevated productivity by extending edge life and allowing aggressive cutting in many cases without sacrificing surface integrity. Paired with suitable toolholders, the plate provides an efficient balance between material removal rate and component quality, making it a practical choice for job shops and production environments that require versatile, dependable inserts. Contact Metav Werkzeuge for application guidance on Walter Tools’ Tiger·tec Gold LNHU160708R-L55T WSP45G insert and arrange a machining review with their technical team. Technical Data SKU: LNHU160708R-L55T-WSP45G-WALTER Article designation: LNHU160708R-L55T WSP45G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Core data Insert size: 16 Plate thickness: 07 Corner radius: 0.8 mm Free/relief angle: 0° (negative) Plate form: Rectangular Tolerance class: H Chipbreaker: L55T Special features Coating/technology: Tiger·tec Gold (PVD-coated carbide) Suitable for: Steel (P), Stainless steel (M), Superalloys / Titanium (S) Execution: U Application: Milling indexable insert optimized for stable chip formation and edge life FAQ Is this insert suitable for machining stainless steel? Yes. The LNHU160708R-L55T WSP45G plate is specified for M‑class materials and provides the chip control and heat resistance required for many stainless steel milling applications. What does Tiger·tec Gold bring to the process? Tiger·tec Gold is a PVD coating and substrate combination that improves wear resistance, thermal stability and edge strength, helping the insert sustain longer cutting times and consistent performance. How does the L55T chipbreaker affect machining? The L55T chipbreaker is designed to produce shorter, controlled chips across a range of cutting conditions, which reduces the likelihood of chip-related interruptions and supports safer, more efficient production cycles. Can this insert be used for titanium and superalloys? Yes. The WSP45G grade is intended for versatile use including S‑group materials such as heat‑resistant superalloys and titanium, where edge stability and thermal management are critical. What is the significance of the negative 0° rake? A negative 0° rake increases edge robustness for interrupted cuts and heavy engagement, improving resistance to chipping at the expense of slightly higher cutting forces, which is beneficial in demanding milling scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com