LNHU160712R-L55T WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the WKP35G grade and the L55T chipbreaker for stable, high‑productivity milling of Stahl and Gusseisen; order directly via Metav Werkzeuge or consult our specialists for process optimisation. LNHU160712R-L55T WKP35G milling insert — Tiger‑tec Gold coating for Stahl and Gusseisen | Walter Tools A LNHU160712R-L55T WKP35G indexable milling insert engineered for productive face and profile milling in Stahl and Gusseisen, featuring a negative 0° relief and a 1.2 mm corner radius for robust edge security Tiger‑tec Gold coating for high wear resistance WKP35G grade for Stahl and Gusseisen machining Negative 0° relief with 1.2 mm corner radius Rectangular insert with L55T chipbreaker Consistent productivity through advanced grade and coating The combination of the WKP35G carbide grade and the Tiger‑tec Gold coating delivers improved wear resistance and stable cutting performance under typical milling loads. Designed for demanding production environments, the insert's coated carbide substrate reduces flank wear and prolongs edge life, which translates into fewer indexings and steadier cycle times. The described coating technology also supports predictable tool life, helping to maintain part quality over longer runs. Reliable chip control and edge strength for secure machining Equipped with the L55T chipbreaker and a 1.2 mm corner radius, the insert provides controlled chip formation and enhanced edge robustness. The negative 0° relief offers increased cutting edge support, particularly advantageous in interrupted cuts and heavy engagement milling. For operations where process reliability matters, these design choices reduce the risk of edge chipping and support consistent surface finish, enabling smoother downstream operations. Material scope and application advantages Specified for ISO groups P / K, the insert is suited for a broad range of Stahl grades and many Gusseisen variants. The substrate and chipbreaker geometry are optimised for the thermal and mechanical conditions typical when machining these workpiece groups. As a result, the plate supports both roughing and semi‑finishing strategies where predictable wear behaviour and robust removal rates are required. Practical integration and handling in the toolline The rectangular form and standard indexable geometry permit straightforward integration into common milling holders and tool systems. With tolerance class H and the given plate dimensions, mounting is reliable and repeatable, which is essential for reproducible results in batch production. The insert's specifications allow quick tool setup and minimal adjustment cycles, aiding in faster machine changeovers and improved shopfloor efficiency. Discuss Walter Tools Tiger‑tec Gold inserts with Metav Werkzeuge for tailored process recommendations and availability — contact Metav Werkzeuge by e‑mail or phone for expert advice and order support Technical data SKU: LNHU160712R-L55T-WKP35G-WALTER Article: Fräswendeschneidplatte LNHU160712R-L55T WKP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WKP35G Chipbreaker: L55T Core specifications Insert size: 16 mm Corner radius: 1.2 mm Relief angle: 0° (negative) Thickness: 07 Plate form: Rectangular Tolerance class: H ISO material groups: P / K Designs and special features Coating technology: Tiger‑tec Gold Grade type: WKP35G (coated carbide) Material suitability: Stahl, Gusseisen Chip control: L55T chipbreaker Application focus: face and profile milling Plate designation: LNHU160712R-L55T FAQ What materials is this insert suitable for? The LNHU160712R-L55T WKP35G milling insert (Walter Tools) is specified for ISO groups P / K and is suitable for machining Stahl and Gusseisen. How does the Tiger‑tec Gold coating benefit tool life? The Tiger‑tec Gold coating on the WKP35G grade enhances wear resistance and reduces flank wear, which extends the service interval of the insert and supports more consistent tool life under production conditions. What is the purpose of the L55T chipbreaker? The L55T chipbreaker on this insert promotes controlled chip formation and evacuation, improving surface quality and reducing the risk of chip‑related interruptions during milling. Can this insert withstand interrupted cuts? Yes, the negative 0° relief and 1.2 mm corner radius provide strengthened cutting edge support, making the insert well suited to interrupted and heavy engagement milling tasks. Which insert designation and SKU should be ordered for this geometry? Order the LNHU160712R-L55T WKP35G insert; the SKU for reference is LNHU160712R-L55T-WKP35G-WALTER and the item is listed under the Tiger‑tec Gold series by Walter Tools. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are cited for explanation only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory‑new product of the manufacturer. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
LNHU160712R-L55T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP35S grade and the L55T chipbreaker for consistent chip control and extended tool life; order directly via Metav Werkzeuge or consult our experts for application-specific advice. LNHU160712R-L55T WKP35S rectangular milling insert — Tiger‑tec Silver, Walter Tools LNHU160712R-L55T WKP35S is a rectangular, negative‑rake milling insert designed for productive machining of steel and cast iron in industrial milling applications Tiger‑tec Silver coated grade WKP35S Optimised chipbreaker L55T for stable chips Suitable for steel (P) and cast iron (K) 0° negative relief for robust cutting performance Increased productivity through controlled chip formation The LNHU160712R-L55T WKP35S insert combines a coated carbide grade with a dedicated chipbreaker L55T, delivering reliable chip control under varying cutting conditions. The Tiger‑tec Silver coating reduces adhesive wear and supports consistent surface quality, while the rectangular geometry ensures stable clamping in indexable milling cutters. For production environments this means fewer interruptions for chip clearing and a steadier cycle time, which translates directly into improved throughput and process stability. Reliable performance across steel and cast iron The cutting grade is optimised for the ISO groups P (steel) and K (cast iron), so the insert performs well on both unalloyed and alloyed steels as well as abrasive cast materials. The WKP35S formulation balances toughness and wear resistance to handle the thermal and mechanical loads typical in steel machining and the brittle, breaking chips of cast iron. Explaining the term: a chipbreaker like L55T shapes and breaks the chip into manageable lengths, reducing risk of entanglement and improving evacuation in high‑volume milling. Geometry engineered for tool life and surface quality A corner radius of 1.2 mm and a negative 0° relief create a robust cutting edge that resists chipping in interrupted cuts and heavy engagement scenarios. The insert’s thickness 07 and rectangular form factor provide secure seating and repeatable positioning in compatible indexable milling cutters. Together, these geometric choices support longer tool life and consistent part finish, reducing the need for frequent insert changes and helping to maintain dimensional accuracy in series production. Practical integration and benefits for the workshop Adopting this insert offers straightforward benefits for CNC milling setups: the coated, grade‑matched insert helps to lower tooling costs per component through extended cutting intervals, while the chip control strategy reduces cycle variability. The insert’s characteristics suit both roughing and semi‑finishing operations where predictable wear behaviour and process security are priorities. For teams planning tool setups, the combination of Tiger‑tec Silver technology and the WKP35S grade makes this insert a reliable option for mixed‑material production runs. For application guidance or to secure supplies of Walter Tools Tiger‑tec Silver inserts, contact Metav Werkzeuge for expert consultation and availability information. Technical Data SKU: LNHU160712R-L55T-WKP35S-WALTER Article designation: LNHU160712R-L55T WKP35S Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Silver Core data Size: 16 Corner radius: 1.2 mm Thickness: 07 Relief angle: 0° (negative) Tolerance class: H Special features Grade: WKP35S (coated carbide) Chipbreaker: L55T Shape: rectangular Applicable materials: Steel (P), Cast iron (K) Execution: U FAQ What materials is this insert suitable for? The LNHU160712R-L55T WKP35S insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. What does the chipbreaker L55T do? The L55T chipbreaker is designed to form and split chips into short, controllable segments, improving evacuation and reducing the risk of chip-related interruptions during milling. How does the 0° negative relief affect cutting? A 0° negative relief creates a stronger cutting edge and higher edge support, which is beneficial in interrupted cuts and heavy milling where edge robustness and stability are required. Is the WKP35S grade coated? Yes, WKP35S is a coated carbide grade utilising Tiger‑tec Silver technology to enhance wear resistance and process reliability in demanding milling applications. Which toolholders are compatible with this rectangular insert? Compatibility depends on the insert seat and clamping system; the LNHU160712R‑L55T geometry fits holders designed for that designation—consult cutter manufacturer specifications or Metav Werkzeuge for matching toolholder options. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification and identification purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer Walter Tools.
LNHU160712R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated grade that combines stable chip formation, broad material compatibility and predictable edge life to keep milling operations productive. The combination of the Tiger·tec Gold grade and the L55T chipbreaker supports efficient machining of steel, stainless steel and heat-resistant alloys; order directly via Metav Werkzeuge or consult our technical team for application advice. LNHU160712R-L55T WSP45G milling insert – Tiger·tec Gold, negative 0° (Walter Tools) The LNHU160712R-L55T WSP45G is a rectangular milling indexable insert designed for versatile face and peripheral milling across steel, stainless steel and superalloys, delivering reliable PVD-coated performance in mixed-production environments Tiger·tec Gold PVD coating for high durability Designed for steel, stainless steel and superalloys Negative 0° rake with 1.2 mm corner radius Rectangular insert with L55T chipbreaker Optimised performance for high-productivity milling The insert is supplied in the Tiger·tec Gold family and the WSP45G grade, a PVD-coated cemented carbide developed for robust milling. This composition prioritises edge stability and repeatable wear behaviour, which translates into longer intervals between index changes and fewer unplanned tool changes. For production environments with mixed batches, the combination of coating technology and substrate hardness reduces the risk of premature flank wear and supports stable cutting forces, thereby helping to maintain consistent component dimensions and surface finish throughout longer tool cycles. Predictable cutting behaviour and secure edge life The negative 0° rake geometry and the 1.2 mm corner radius deliver a secure cutting action that favours controlled chip formation under variable cutting conditions. The integrated L55T chipbreaker promotes short, manageable chips during interrupted cuts and slotting, lowering the chance of re-cutting and tool damage. As a result, machining cycles benefit from enhanced process reliability and fewer interruptions, which improves throughput and supports leaner production planning with predictable tool replacement intervals. Broad material capability with clear application guidance This grade is specified for the ISO material groups P / M / S, meaning suitability for unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium. The WSP45G chemistry is tuned to handle the typical heat generation and work-hardening tendencies of these materials while maintaining a stable cutting edge. In practice, this makes the insert suitable for a range of operations from robust roughing passes to medium-finishing, especially where a single insert stock is preferred to reduce tool inventory and changeover time. Production-ready design and handling benefits The rectangular form factor and the thickness code support secure clamping and simple indexing, while the tolerance class H ensures repeatable seating in standard toolholders. As a component of the Tiger·tec Gold series, the insert aligns with Walter Tools’ emphasis on process security and consistent surface quality. For workshops aiming to streamline tool management, the robust combination of geometry and coating contributes to fewer stoppages, stable cycle times and ultimately improved overall equipment effectiveness. Secure reliable milling performance with Walter Tools’ Tiger·tec Gold insert — contact Metav Werkzeuge for availability and dedicated application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: LNHU160712R-L55T-WSP45G-WALTER Designation: LNHU160712R-L55T Product type: Fräswendeschneidplatte / Milling insert Manufacturer: Walter Tools Facts Plate size: 16 Corner radius: 1.2 mm Thickness code: 07 Free angle: 0° (negative) Tolerance class: H Special features Series: Tiger·tec Gold Grade: WSP45G (PVD-coated cemented carbide) Chipbreaker: L55T Shape: Rectangular insert Material groups: P / M / S (steel, stainless steel, superalloys/titanium) Execution: U FAQ What materials is the insert suitable for? The LNHU160712R-L55T WSP45G insert is specified for ISO groups P, M and S, covering steel, stainless steel and high-temperature alloys or titanium. How does the Tiger·tec Gold grade affect tool life? The Tiger·tec Gold coating on the WSP45G grade enhances wear resistance and heat management, delivering more predictable tool life and consistent cutting performance in milling operations. Which machining tasks benefit most from the L55T chipbreaker? Operations with interrupted cuts, pocketing and general roughing to medium finishing gain from the L55T chipbreaker, which creates short, controlled chips and reduces re-cutting. Is the negative 0° rake suitable for heavy cuts? Yes, the negative 0° rake provides a robust cutting edge and is suited to higher radial loads and roughing passes where stability and edge protection are priorities. What does the thickness code 07 mean for clamping? The thickness code indicates the insert profile used in standard indexable holders; correct seating and the H tolerance class support repeatable mounting and secure clamping. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand-new product from the manufacturer Walter Tools.
LNHU160716R-L55T WSP45G WSP45G Wendeplatten - Walter Tools
Taking advantage of a proven PVD grade and a robust geometry, this insert combines consistent edge life with reliable chip control for demanding milling tasks. Benefit from the Tiger‑tec Gold wear resistance and the L55T chipbreaker for stable performance; order directly via Metav Werkzeuge or consult the specialists for application-specific advice. LNHU160716R-L55T WSP45G — Rectangular milling indexable insert, Tiger‑tec Gold, Walter Tools A LNHU160716R-L55T WSP45G rectangular milling insert designed for versatile roughing and finishing in steel, stainless steel and heat‑resistant alloys Tiger‑tec Gold PVD coating Suitable for steel, stainless steel, superalloys 0° negative rake for stable cutting 1.6 mm corner radius for edge strength Higher productivity through a versatile coated grade The Tiger‑tec Gold coating and the WSP45G grade provide a balance of wear resistance and toughness that supports productive milling across many materials. As a PVD‑coated, coated cemented carbide grade, it is engineered for the heat and chip‑formation characteristics typical of steels (P), for the toughness of stainless steels (M) and for the demands of heat‑resistant superalloys and titanium (S). This combination reduces flank wear and allows for predictable tool life, which in turn minimises unplanned stoppages and supports a smoother production flow. Geometry that secures edge stability and chip control The insert’s 0° negative rake and corner radius 1.6 mm enhance mechanical strength at the cutting edge, making the geometry suited to interrupted cuts and heavier radial engagement. The chipbreaker L55T is tuned to reliably control chips and improve surface finish during both roughing and finishing passes, while the rectangular format provides clear reference edges for toolholder clamping. Together these features mean fewer insert changes and more consistent component quality in serial production. Practical use and process guidance for consistent results When paired with appropriate feeds and cutting speeds for each material group, the robust design of this rectangular plate helps to keep machining stable over long runs. For steels and stainless steels the grade encourages secure chip formation; for superalloys, the wear resistance of the coating helps to withstand high thermal loads. The insert’s stable performance supports cost‑effective machining by extending regrinding intervals and reducing scrap rates. For tailored cutting data and holder recommendations, the technical consultants at Metav Werkzeuge provide application‑oriented support. For machining challenges that demand process security and consistent edge life, contact Metav Werkzeuge for detailed recommendations and ordering support by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: LNHU160716R-L55T-WSP45G-WALTER Product type: Fräswendeschneidplatte / milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Sort: WSP45G Execution: U Shape: Rectangular Designation: LNHU160716R-L55T Core dimensions & tolerances Plate size: 16 mm Corner radius: 1.6 mm Thickness: 7.0 mm Rake angle: 0° Tolerance class: H Material compatibility & features Coating: PVD (Tiger‑tec Gold) Chipbreaker: L55T Applicable materials: Steel (P), Stainless steel (M), Superalloys / Titanium (S) Grade description: coated cemented carbide Series information: Tiger‑tec Gold Shape: Rectangular Execution code: U FAQ What materials is this insert suitable for? The LNHU160716R-L55T WSP45G insert from Walter Tools is suitable for machining Steel (P), stainless steel (M) and heat‑resistant superalloys/Titanium (S) thanks to its Tiger‑tec Gold coated grade. What benefits does the L55T chipbreaker provide? The chipbreaker L55T ensures controlled chip formation and evacuation, improving surface finish and reducing the risk of built‑up edge during operations with the LNHU160716R-L55T WSP45G insert. How does the 0° negative rake affect machining performance? A 0° negative rake increases edge robustness and stability, which helps the insert resist shock and perform reliably in interrupted or heavy cutting conditions. Is this insert compatible with standard rectangular toolholders? The rectangular form and coded designation of the LNHU160716R-L55T make it compatible with matching rectangular milling holders designed for this insert geometry; holders must match the insert size and clamping style. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand presence: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, brand‑new product from the manufacturer.
LNHU160812-F57T WKP25S U Wendeplatten - Walter Tools
Benefit from the combination of broad material capability, high cutting-edge stability and effective chip control; order the LNHU160812-F57T WKP25S insert directly via Metav Werkzeuge or consult their specialists for tailored advice. LNHU160812-F57T WKP25S indexable milling insert – Tiger·tec Silver grade for steel and cast iron, 0° negative, Walter Tools The LNHU160812-F57S WKP25S is an indexable milling insert designed for productive face and shoulder milling in steel and cast iron, utilising Tiger·tec Silver coating technology to extend tool life and process reliability. Tiger·tec Silver coating for stable cutting WKP25S grade optimised for steel and cast iron Rectangular 16 size with 1.2 mm corner radius 0° negative rake for secure engagement High productivity through a coated, wear-resistant grade The LNHU160812-F57T WKP25S combines the Tiger·tec Silver coating with a specially developed WKP25S grade to deliver coated carbide performance tailored to the heat and abrasion typical of P and K materials. This results in greater tool life and a more predictable wear pattern, which directly reduces tool change frequency and supports continuous production. The chemistry and coating stack behind the grade are optimised to maintain a stable cutting edge under varying cutting conditions, offering measurable gains in process efficiency for series production and single-part runs alike. Consistent chip control and secure cutting geometry The insert’s chipbreaker F57T and 0° negative rake work together to produce controlled, short chips when machining cast iron and stable chips when cutting steel, improving evacuation and reducing re-cutting. The 1.2 mm corner radius supports robust edge strength and helps maintain surface quality with each pass. As a rectangular insert, it provides predictable engagement and repeatable contact geometry, which simplifies programming and holder selection while reducing vibration and the risk of workpiece damage. Streamlined tooling and integration for efficient workflows By covering both P (steel) and K (cast iron) material groups, this insert lowers the need for multiple specialised grades in a tool cabinet, supporting leaner inventory and faster set-ups. The tolerance class H ensures consistent dimensions for reliable clamping and repeatable results across tool changes. Integration into standard cutter bodies is straightforward thanks to the common designation and form factor; process planners benefit from predictable cutting data and shorter qualification times. For application-specific data or geometry checks, technical consultation is available to confirm suitability for particular holders and components. Contact Metav Werkzeuge for application advice and procurement of Walter Tools LNHU160812-F57T WKP25S inserts – eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: LNHU160812-F57T-WKP25S-WALTER Designation: LNHU160812-F57T Full designation: LNHU160812-F57T WKP25S Manufacturer: Walter Tools Product type: Indexable milling insert Facts Size: 16 Thickness: 08 Corner radius: 1.2 mm Free angle: 0° (negative) Tolerance class: H Special features Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: F57T Material suitability: P / K (steel, cast iron) Insert form: Rectangular Execution: U FAQ Which materials is this insert suitable for? The LNHU160812-F57T WKP25S is designed for machining steel (P) and cast iron (K), matching ISO material group recommendations for this grade and coating. How does the Tiger·tec Silver coating help in production? Tiger·tec Silver increases wear resistance and cutting-edge stability on the WKP25S grade, extending tool life and improving process reliability under typical steel and cast-iron cutting conditions. What is the effect of the 0° negative rake? A 0° negative rake provides secure engagement and edge strength, reducing the risk of edge chipping during interrupted cuts and supporting stable chip formation with the F57T chipbreaker. Is the geometry compatible with standard cutter bodies? The rectangular form and tolerance class H ensure dimensional consistency for common cutter systems; however, the clamping pocket and seat should be checked against the insert’s full designation before assembly. What surface finish can be expected with the 1.2 mm corner radius? A 1.2 mm corner radius balances edge strength and surface quality, producing improved finish compared with larger radii while maintaining robustness for medium-depth milling passes. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer.
LNHU160812-F57T WKP35S Wendeplatten - Walter Tools
Take advantage of the WKP35S grade and the Tiger·tec Silver coating for consistent chip control and extended edge life; the combination of a robust negative 0° rake and the F57T chipformer ensures productive milling in steel and cast iron. Order the insert directly via Metav Werkzeuge or consult the specialists for application support. LNHU160812-F57T WKP35S milling indexable insert — Walter Tools, Tiger·tec Silver, negative 0° rake LNHU160812-F57T WKP35S is a rectangular milling indexable insert designed for demanding steel and cast iron applications, offering a resilient cutting edge and proven chip control in interrupted and continuous cuts. Tiger·tec Silver coated grade WKP35S Optimised chipformer F57T for reliable chips Negative 0° rake for robust engagement 1.2 mm corner radius for consistent edge life Robust performance for steel and cast iron machining The WKP35S grade, realised in Walter Tools' Tiger·tec Silver technology, is tailored to the thermal and abrasive conditions encountered in machining steel and cast iron. This coated carbide grade balances wear resistance and fracture toughness to maintain a stable cutting edge under fluctuating loads. The negative 0° rake increases cutting-edge strength, which reduces the risk of chipping in interrupted cuts and when machining castings with variable material density. For production environments seeking dependable cycle times, this geometry supports a stable process and predictable regrinding intervals. Reliable chip control and surface quality Equipped with the F57T chipformer, the insert delivers controlled chip breaking and evacuation, reducing tool pressure spikes and heat concentration at the cutting zone. A consistent chip shape minimises recutting and helps to preserve the workpiece finish; the 1.2 mm corner radius further contributes to edge stability and can improve surface integrity on demanding components. Clear chip flow also supports higher feed rates where cycle-time reduction is a priority, making the insert suitable for both roughing and mixed finishing steps in stainless workflows where steel and cast iron dominate. Process security and easier tool planning The rectangular format with the specified thickness and the H tolerance class provides repeatable seating and indexing, which simplifies toolset management on machining centres. The coated carbide substrate of the Tiger·tec Silver series resists flank wear and maintains dimensional predictability across tool life, supporting lean manufacturing principles. For maintenance planning, predictable wear behaviour reduces unscheduled downtime and enables longer uninterrupted production runs, translating into a measurable improvement in overall equipment effectiveness. Practical application notes for production planners Selection of the WKP35S grade is appropriate when process robustness is more critical than maximising finish at the lowest feeds. Its balanced properties favour medium to high cutting speeds common in modern milling strategies for steel and cast iron. Tooling engineers should pair the insert with appropriate cutter bodies rated for the insert format and verify recommended cutting data from Walter Tools to match workpiece hardness and required chip thickness. When optimising for economy, the combination of a tough grade and effective chip control frequently extends net tool life and reduces total machining cost per part. For Walter Tools' robust Tiger·tec Silver inserts and tailored application advice, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and supply options. Technical Data Article number: LNHU160812-F57T-WKP35S-WALTER Product type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger·tec Silver Grade: WKP35S Manufacturer: Walter Tools Designation: LNHU160812-F57T WKP35S Facts Corner radius: 1.2 mm Format: 16 Thickness: 08 Rake angle: 0° (negative) Tolerance class: H Special features Coating: Tiger·tec Silver coated carbide Chipformer: F57T Shape: Rectangular Material suitability: Steel (P), Cast iron (K) Robust edge for interrupted cuts FAQ What materials is this insert suitable for? The insert is designed for machining steel (P) and cast iron (K); the WKP35S grade and Tiger·tec Silver coating address both thermal and abrasive conditions typical for these groups. How does the F57T chipformer affect milling? The F57T chipformer provides controlled chip breaking and evacuation, which reduces recutting and stabilises cutting forces for improved surface quality and tool life with this Walter Tools insert. Why choose a negative 0° rake for this insert? A negative 0° rake increases cutting-edge strength and resistance to chipping, especially useful in interrupted cuts or when material inconsistency occurs in cast parts. What benefit does the 1.2 mm corner radius bring? The 1.2 mm corner radius increases edge robustness and can improve surface integrity, making the insert suitable for applications where a balance of strength and finish is required. Manufacturer: Walter AG; Headquarters: Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHU160812-F57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and the WPP35G grade for productive, stable steel machining with robust chip control; order or request cutting data via Metav Werkzeuge for process-optimised results. LNHU160812-F57T WPP35G Milling indexable insert — Tiger‑tec Gold, for steel (Walter Tools) The LNHU160812-F57T WPP35G is a rectangular milling indexable insert engineered for high‑productivity steel machining where balanced wear resistance and toughness are required. Tiger‑tec Gold coated for stable edge life WPP35G grade optimised for steel machining Rectangular insert with 1.2 mm corner radius Negative 0° relief angle for secure clamping Consistent performance through an advanced grade The combination of the Tiger‑tec Gold coating and the WPP35G carbide grade delivers consistent machining results across a wide range of steel materials. The coating technology reduces flank wear and improves thermal resistance, which extends tool life under typical steel cutting temperatures. Specifying this grade supports predictable tool change intervals and contributes to higher uptime in milling operations. For manufacturing planners, this means fewer unplanned stops and steadier output quality when machining unalloyed and alloyed steel. Effective chip control and secure cutting geometry The F57T chipbreaker profile and the 1.2 mm corner radius are designed to improve chip formation and evacuation when milling steels. A chipbreaker shapes the chip at the cutting edge, reducing the risk of long, stringy chips and helping to prevent re-cutting and surface damage. The negative 0° relief angle increases clamping stability and is especially advantageous in interrupted cuts or where rigidity is limited. Together, these geometry choices result in more reliable finishes and lower risk of edge chipping during demanding operations. Built for durability and economical tool life A coated carbide indexable insert from the Tiger‑tec Gold family combines wear resistance with sufficient toughness to handle variable cutting conditions. The design aims to balance economy and performance: extended edge life reduces the frequency of index changes, while the grade’s resilience minimises unexpected chipping. This balance contributes to lower overall tooling costs per component and supports a more predictable production plan. For production engineers seeking repeatable results and controlled tool consumption, the insert represents a practical compromise between longevity and robustness. For tailored cutting data, application guidance or to secure supply of Walter Tools Tiger‑tec Gold inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or phone +49 2822 7131930 for consultancy and ordering assistance. Technical Data Article number: LNHU160812-F57T-WPP35G-WALTER Designation: LNHU160812-F57T WPP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP35G Core Dimensions Plate size: 16 Thickness: 08 Corner radius: 1.2 Relief angle: 0° (negativ) Tolerance class: H Materials & Features Suitable for steel Chipbreaker: F57T Shape: Rectangular Execution: U Material code: P FAQ What materials is this insert intended for? The LNHU160812-F57T WPP35G insert is intended primarily for steel machining; the WPP35G grade and Tiger‑tec Gold coating are optimised for the typical heat and chip characteristics of steel. What advantages does the WPP35G grade offer? WPP35G is a Walter Tools coated carbide grade that balances wear resistance and toughness; it is part of the Tiger‑tec Gold family and is selected to provide stable edge life and reliable performance in steel applications. How does the F57T chipbreaker affect machining? The F57T chipbreaker promotes controlled chip formation and evacuation, reducing the risk of long, entangling chips and improving surface finish during milling of steel. Is the negative 0° relief angle suitable for interrupted cuts? Yes, the negative 0° relief angle increases clamping security and edge support, making the insert well suited to interrupted cuts and operations where rigidity is limited. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes; there is no affiliation between our company and the mentioned brands. The offered item is an original, brand‑new product from the manufacturer.
LNHU160812-F57T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, a heat-resistant Tiger·tec Gold grade and precise chip control for confident milling of stainless steels and superalloys. Order directly via Metav Werkzeuge or consult our specialists for application support. LNHU160812-F57T WSM35G rectangular milling insert – Tiger·tec Gold, for stainless steels and superalloys (Walter Tools) LNHU160812-F57T WSM35G is a rectangular milling insert designed for heavy-duty and difficult-to-machine materials, featuring a Tiger·tec Gold coating and a negative 0° relief geometry Tiger·tec Gold coated carbide grade WSM35G For stainless steels and heat-resistant alloys Rectangular shape with 1.2 mm corner radius F57T chipbreaker for stable chips and edge security High-process stability for demanding materials The WSM35G grade, part of the Tiger·tec Gold family, is engineered for machining stainless steels and heat-resistant superalloys where thermal load and material toughness challenge conventional inserts. The coated carbide composition provides improved heat resistance and promotes a stable cutting edge, reducing the risk of built-up edge and premature wear. This results in predictable tool life and fewer interruptions in production, supporting a consistent output in serial milling operations. Geometry and chip control that reduce downtime A negative 0° relief and the F57T chipbreaker combine to ensure robust edge support and controlled chip formation during high cutting forces. The rectangular format with a 1.2 mm corner radius resists chipping under interrupted cuts and shoulder milling. Controlled chip formation lowers the chance of recutting and tool damage, which translates into less machine downtime and improved surface quality on demanding alloys. Clear economic and process advantages Choosing this insert brings concrete efficiency gains: the coated grade extends cutting intervals and the reliable edge stability reduces regrinds and rejects. In practical terms, shops machining components in stainless steels or nickel-based alloys will benefit from fewer tool changes and more reproducible cycle times. The result is a positive impact on overall productivity and a clearer cost-per-part calculation when integrating the grade into existing toolsets. Practical application guidance and compatibility The insert is suitable for heavy milling tasks where toughness and heat generation are critical. It performs well in shoulder milling, slotting and rough to semi-finish operations on low-thermal-conductivity materials. For best results pair the insert with stable toolholders and appropriate cutting parameters adapted to material and depth of cut. The robust chip control of the F57T geometry simplifies swarf handling in automated cells and manual setups alike. Contact Metav Werkzeuge for tailored machining recommendations for Tiger·tec Gold inserts or to discuss application-specific parameters and stock availability Technical data SKU: LNHU160812-F57T-WSM35G-WALTER Article designation: LNHU160812-F57T WSM35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Core data Insert size: 16 Corner radius: 1.2 mm Plate thickness: 08 Relief angle: 0° (negative) Tolerance class: H Designs / special features Shape: Rectangular Chipbreaker: F57T Coating: Tiger·tec Gold (coated carbide) Application groups: stainless steels (M), heat-resistant alloys and titanium (S) FAQ What materials is this insert best suited for? The LNHU160812-F57T WSM35G insert (Walter Tools) is optimised for stainless steels and heat-resistant superalloys, with the Tiger·tec Gold coating supporting stable cutting under high thermal load. Which operations benefit most from this insert geometry? Its rectangular shape and 1.2 mm corner radius make the insert well suited to shoulder milling, roughing and semi-finishing where interrupted cuts and heavy engagement occur. How does the F57T chipbreaker affect machining? The F57T chipbreaker promotes controlled chip formation and evacuation, reducing recutting and improving tool life for the WSM35G grade during demanding milling tasks. Is this insert compatible with standard milling holders? The insert conforms to established rectangular milling insert formats; it is compatible with toolholders designed for LNHU-style plates and should be seated with correct clamping for optimal performance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LNHU160812-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD durability and the WSP45G grade’s versatility for efficient, repeatable milling of steel, stainless steels and heat-resistant alloys; order directly via Metav Werkzeuge or consult our experts for machining recommendations. LNHU160812-F57T WSP45G rectangular milling insert with Tiger·tec Gold coating – Walter Tools The LNHU160812-F57T WSP45G is a compact rectangular milling insert engineered for versatile, high-productivity face and shoulder milling across steels, stainless steels and heat-resistant superalloys. Tiger·tec Gold coating for improved wear resistance Grade WSP45G for versatile steel and superalloy machining Rectangular insert with 1.2 mm corner radius Negative 0° rake and F57T chipbreaker for stable cuts Durable coating and material range for steady production The combination of the Tiger·tec Gold PVD coating and the WSP45G carbide grade delivers improved wear resistance and consistent edge life under the thermal and mechanical loads typical of milling. This grade is specially tuned for the ISO workpiece groups P, M and S, which means reliable performance on unalloyed and alloyed steel, stainless steels and heat-resistant superalloys or titanium. The rectangular form factor and robust substrate make the insert well suited to medium- and heavy-duty milling operations where predictable tool life reduces downtime and simplifies production planning. Stable cutting behaviour and controlled chip formation Negative geometry with a 0° rake improves the insert’s ability to withstand interrupted cuts and variable engagement, while the F57T chipbreaker promotes reliable chip control and surface finish. The chipbreaker is designed to fragment swarf and channel it away from the cutting edge, reducing the risk of built-up edge and helping to maintain dimensional consistency. For workshops moving from conventional inserts, this arrangement balances toughness and edge stability, enabling higher feed rates with lower risk of edge failure and fewer tool changes in repetitive milling tasks. Precision fit and simplified tooling choices Manufactured to tolerance class H, the insert features a 1.2 mm corner radius that supports robust edge strength and improved component corner quality. Its compact 16 size and thickness code 08 make it compatible with standard clamping systems for rectangular inserts, simplifying inventory and toolholder selection. The combination of grade, geometry and coating supports predictable reconditioning intervals and efficient tool use in job shops and production lines seeking cost-effective milling solutions. This indexable design contributes to steady cycle-times and consistent surface quality over extended runs. For high-productivity milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for tailored cutting data and fast delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: LNHU160812-F57T-WSP45G-WALTER Designation: LNHU160812-F57T WSP45G Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Form: Rectangular Chipbreaker: F57T Execution: U Core data Corner radius: 1.2 mm Relief angle: 0° (negative) Plate size: 16 Thickness code: 08 Tolerance class: H Materials & features Coating: Tiger·tec Gold (PVD) Carbide: coated cemented carbide Applicable for: steel (P), stainless steels (M), superalloys/titanium (S) Geometry: negative rake, indexable insert Typical applications: face milling, shoulder milling, general milling FAQ What materials can be machined with this insert? The LNHU160812-F57T WSP45G is formulated for machining steel, stainless steels and heat-resistant superalloys (ISO groups P, M, S) thanks to the Tiger·tec Gold coated grade. How does the F57T chipbreaker affect performance? The F57T chipbreaker promotes controlled chip formation and evacuation, improving surface finish and reducing the likelihood of built-up edge during milling operations with the insert. Is this insert suitable for interrupted cuts? Yes, the negative 0° rake geometry enhances edge strength and resistance to impact, making the insert well suited to interrupted and mixed engagement milling situations. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and thermal stability, which extends tool life and supports consistent production quality. Which tolerance and dimensions should be expected for toolholder compatibility? The insert is produced to tolerance class H, with a 1.2 mm corner radius and size 16, enabling straightforward compatibility with standard rectangular insert toolholders. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
LNHX070204-F57T WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating and the WKP35S carbide grade for a reliable balance of tool life and process stability; the rectangular format and F57T chipbreaker ensure controlled chip formation during machining. Order the LNHX070204-F57T WKP35S directly via Metav Werkzeuge or consult their advisors for application-specific recommendations. LNHX070204-F57T WKP35S – Rectangular milling indexable insert, Tiger‑tec Silver coated, for steel and cast iron | Walter Tools The LNHX070204-F57T WKP35S is a rectangular milling indexable insert engineered for productive turning and milling operations in steel and cast iron, combining a specialised chipbreaker and a negative rake geometry for stable material removal. Tiger‑tec Silver coated carbide grade WKP35S Optimised chip control with F57T breaker Negative 0° rake for stable cutting Rectangular 07 format with 0.4 mm corner radius Outstanding wear resistance for consistent production results The combination of the Tiger‑tec Silver coating and the WKP35S coated carbide grade provides high wear resistance and stable cutting edge performance, which translates directly into longer tool life and fewer insert changes on the shop floor. Designed specifically for machining both steel (ISO group P) and cast iron (ISO group K), this insert compensates for the heat and abrasive effects encountered in these materials. The result is a predictable process window that supports higher metal removal rates while maintaining component quality. Controlled chip formation and surface quality from insert geometry The integrated F57T chipbreaker and the rectangular geometry deliver reliable chip control, reducing the risk of entanglement and improving swarf evacuation in interrupted or continuous cuts. The 0.4 mm corner radius contributes to consistent edge strength and surface finish without compromising dimensional accuracy. With a 0° negative rake, the insert offers increased cutting stability in heavy cuts and interrupted machining, making it suitable for demanding production environments that prioritise repeatability and minimal downtime. Practical application guidance to optimise productivity Designed as a versatile production insert, the component is suitable for a range of milling strategies in job shops and serial production. The format code 07 and thickness code 02 correlate with common toolholder systems; the rectangular shape facilitates secure clamping and indexability. For process optimisation, pairing the insert with suitable cutting parameters for steel and cast iron delivers the best compromise between tool life and cycle time. For specific parameter recommendations and application notes, consult the product advisors to align feed and speed with machine rigidity and coolant strategy. The result is improved throughput and reduced tooling costs per component. Reliable choice for industrial machining routines As part of the Tiger‑tec Silver series, this insert offers a balance of economy and performance: lower overall tooling cost through extended life, plus dependable results across diverse workpiece batches. The design supports stable chip formation and robust cutting edges, which reduces the occurrence of unplanned stoppages. In production environments where consistency and uptime matter, this insert helps secure process reliability and quality repeatability. The Walter Tools pedigree further emphasises the insert’s suitability for professional engineering contexts. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is recognised for precision tooling and is part of the Swedish Sandvik Group; the company’s portfolio emphasises high process reliability and consistent tool life. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer. For application support and availability of the Walter Tools LNHX070204-F57T WKP35S insert, contact Metav Werkzeuge for cutting data sheets and delivery options at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: LNHX070204-F57T-WKP35S-WALTER Product label: Fräswendeschneidplatte LNHX070204-F57T WKP35S Walter Tools Product type: Fräswendeschneidplatte (milling indexable insert) Brand: Walter Tools Designation: LNHX070204-F57T WKP35S Series: Tiger‑tec Silver Grade: WKP35S Chipbreaker: F57T Shape: Rectangular Execution: X Tolerance class: H Core Data Plate size code: 07 Thickness code: 02 Corner radius: 0.4 mm Free rake angle: 0° (negative) Material suitability: P (steel), K (cast iron) SKU: LNHX070204-F57T-WKP35S-WALTER Design & Features Coating: Tiger‑tec Silver Material of insert: Coated carbide Chip control: F57T chipbreaker Geometry: Rectangular insert for indexable mounting Application focus: Production machining of steel and cast iron Tolerances: Class H Series characteristic: Balanced wear resistance and process stability FAQ What materials is this insert suited for? The LNHX070204-F57T WKP35S insert is specified for ISO groups P (steel) and K (cast iron), with the WKP35S grade optimised for these material families. How does the F57T chipbreaker improve machining? The F57T chipbreaker on the insert shapes chips for safer evacuation and reduces the chance of swarf clogging, improving process stability and surface finish during continuous and interrupted cuts. What is the effect of the 0° negative rake in heavy cuts? A 0° negative rake increases insert strength and cutting stability, making the geometry particularly effective for interrupted cuts and higher depth‑of‑cut conditions where edge robustness is critical. Can this insert be used in automated production lines? Yes, the insert’s coated carbide grade and proven chip control make it suitable for automated, high‑volume operations where consistent tool life and repeatable results are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
LNHX070204-F57T WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WPP35G grade for reliable steel machining, resulting in steady tool life and predictable process windows; order directly via Metav Werkzeuge or consult the Metav team for application support. LNHX070204-F57T WPP35G — milling indexable insert, Tiger·tec Gold, for steel (ISO P) — Walter Tools A LNHX070204-F57T WPP35G milling indexable insert designed for robust steel machining, built on the Tiger·tec Gold coated carbide grade for stable cutting and long edge life Tiger·tec Gold coating for extended tool life Optimised for ISO P (steel) machining Negative 0° rake for robust cutting action Chipbreaker F57T for consistent chip control Boosted productivity through a proven coated grade The combination of the Tiger·tec Gold coating with the WPP35G carbide grade delivers a measurable increase in process stability when machining steel. The coating reduces flank wear and increases resistance to thermal and abrasive influence, which translates into longer intervals between indexings and fewer tool changes. For production environments where cycle-time consistency matters, this coated insert offers improved uptime and more predictable part quality. The technical design supports typical heat and chip formation in steel cutting, enhancing surface finish and reducing risk of edge chipping. Stable cutting behaviour and reliable chip control Engineered with a chipbreaker F57T and a negative 0° rake, the insert provides a robust cutting geometry that resists mechanical and thermal shock. The 0.4 mm corner radius contributes to a stable cutting edge, improving edge strength for interrupted cuts and heavy roughing passes. The chipbreaker geometry is tuned to evacuate chips efficiently during continuous milling of Steel (ISO P), reducing re-cutting and supporting consistent coolant interaction. This results in fewer tool-related stoppages and more predictable machining results across batch runs. Seamless integration and predictable performance on steel As an indexable insert in the LNHX-series, the component fits common milling toolholders and supports fast, repeatable replacement. Suitability for ISO P steels ensures selection simplicity for process planners and operators aiming for consistent parameters across different machines. The rectangular form and standardised size allow straightforward programming and repeatability in tool offsets. With its combination of grade, coating and chip control, the insert supports both productivity-oriented roughing and stable semi-finishing, offering a well-balanced solution for workshop and production environments. Contact Metav Werkzeuge today for tailored advice on Walter Tools Tiger·tec Gold inserts and to ensure the optimal machining set-up for steel applications. Technical data SKU: LNHX070204-F57T-WPP35G-WALTER Article name: Fräswendeschneidplatte LNHX070204-F57T WPP35G Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Facts Corner radius: 0.4 mm Free angle: 0° (negative) Plate size: 07 Plate thickness: 02 Tolerance class: H Special features Coating / grade: Tiger·tec Gold / WPP35G Chipbreaker: F57T Shape: Rectangle Execution: X Material suitability: Steel (ISO P) FAQ What materials is this insert intended for? The LNHX070204-F57T WPP35G insert from Walter Tools is intended for machining steel, designated by ISO group P. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold on the WPP35G grade reduces flank wear and improves heat resistance, giving the insert longer usable life and steadier performance in steel milling operations. What is the effect of the negative 0° rake angle? A negative 0° rake provides a robust cutting edge that is better at withstanding shock and interrupted cuts; the LNHX070204-F57T benefits from this for heavy-duty milling. Which chip control behaviour can be expected with chipbreaker F57T? The F57T chipbreaker is designed to produce short, controllable chips during steel milling, improving evacuation and reducing the chance of entanglement or re-cutting. Is this insert compatible with standard milling holders? This indexable insert follows common LNHX-series dimensions and can be used in compatible milling toolholders; check holder compatibility against the SKU LNHX070204-F57T-WPP35G for precise fit. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
LNHX070204-F57T WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of a coated Tiger·tec Gold grade that combines WSM35G heat resistance with a 0.4 mm corner radius and negative 0° geometry for reliable chip control and consistent edge life; order the insert through Metav Werkzeuge or consult the team for grade selection and application advice. LNHX070204-F57T WSM35G rectangular indexable milling insert — Tiger·tec Gold, for rostfreier Stahl and heat‑resistant alloys (Walter Tools) LNHX070204-F57T WSM35G is a rectangular milling indexable insert designed for high‑stress machining of rostfreier Stahl and heat‑resistant superalloys, offering a Tiger·tec Gold coating and a chipbreaker optimised for stable cutting. Tiger·tec Gold coating for heat resistance Suitable for rostfreier Stahl and superalloys Corner radius 0.4 mm for reliable edge strength Negative 0° geometry for secure chip control Robust performance for demanding materials The Tiger·tec Gold WSM35G grade is formulated for machining rostfreier Stahl (stainless steels) and heat‑resistant superalloys; it supports secure chip formation where workpieces show toughness and high heat generation. The combination of a coated cemented‑carbide grade and the F57T chipbreaker helps to reduce built‑up edge and stabilise the cutting process. For production environments where material mix and thermal load vary, this insert offers consistent cutting behaviour and predictable tool life, translating into fewer tool changes and improved throughput. Predictable surface quality and process security With a 0.4 mm corner radius and 0° (negative) rake, the insert delivers a balance between edge strength and surface finish. The negative geometry increases edge stability under interruption or heavy cross‑cutting, while the modest corner radius supports a fine surface when feeds and speeds are adapted accordingly. The tolerance class H ensures repeatable seating in the toolholder, contributing to reliable part accuracy and minimised setup variation in serial production. Durable design and efficient chip handling The F57T chipbreaker geometry, paired with the Tiger·tec Gold technology, is engineered for improved heat resistance and wear behaviour during machining of tough alloys. This results in more uniform flank wear and extended productive life of the cutting edge. The rectangular form factor and the insert thickness designation support sturdy clamping and help to prevent vibration in heavy‑duty roughing passes. These features combine to lower overall process costs through fewer interruptions and stable machining cycles. Practical application guidance and compatibility The insert is deliverable in size designation 07 with thickness code 02 and is compatible with tooling systems accepting the LNHX series geometry. It is particularly suited to roughing and semi‑finishing operations in rostfreier Stahl and titanium‑alloy components where thermal loads and chip control are critical. Selection of cutting parameters should take into account the material group (M for rostfreier Stahl; S for superalloys/titanium) and the machine/toolholder rigidity to exploit the grade's heat resistance and edge stability most effectively. Contact Metav Werkzeuge for tailored grade recommendations and availability of Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid technical support and ordering. Technical Data SKU: LNHX070204-F57T-WSM35G-WALTER Article: LNHX070204-F57T WSM35G Type: Fräswendeschneidplatte Series: Tiger·tec Gold Grade: WSM35G Manufacturer: Walter Tools Core technical data Corner radius: 0.4 mm Free rake angle: 0° (negative) Plate size: 07 Plate thickness: 02 Tolerance class: H Design and special features Coating: Tiger·tec Gold Chipbreaker: F57T Shape: Rectangular Geometry: X / negative Material suitability: rostfreier Stahl (M), heat‑resistant superalloys and titanium (S) FAQ What materials is this insert designed for? The LNHX070204‑F57T WSM35G insert is designed primarily for rostfreier Stahl and heat‑resistant superalloys/titanium (material groups M and S), offering enhanced heat resistance and chip control. How does the 0.4 mm corner radius affect machining? A 0.4 mm corner radius increases edge strength and distributes cutting forces more evenly, improving durability during roughing while still allowing acceptable surface quality in semi‑finishing when parameters are adapted. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating on the WSM35G grade improves thermal stability and wear resistance, which supports longer tool life and more consistent performance in high‑temperature machining conditions. Is the negative 0° geometry suitable for interrupted cuts? Yes, the negative 0° geometry enhances edge stability under interrupted cuts and heavy engagement, reducing the risk of chipping on the cutting edge. Can this insert be used for finishing operations? While optimised for roughing and semi‑finishing in tough materials, the insert can be used for finishing if cutting data are finely tuned and machine rigidity is sufficient to achieve the required surface quality. What does tolerance class H mean for toolholders? Tolerance class H indicates a precision fit to the specified geometric tolerances, ensuring repeatable positioning in the toolholder and consistent machining accuracy with the LNHX series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade designations are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product from the manufacturer.
LNHX070204-F57T WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the robust 0° negative rake geometry for dependable performance on demanding milling tasks; the WSP45G grade delivers wear resistance across Stahl, rostfreier Stahl and high‑temperature alloys. Order the insert directly via Metav Werkzeuge or contact the consultants for application-specific recommendations. LNHX070204-F57T WSP45G – Fräswendeschneidplatte (rectangular), Tiger·tec Gold, Walter Tools The LNHX070204-F57T WSP45G is a rectangular indexable milling insert designed for high‑productivity face and shoulder milling where edge stability and reliable chip control are required. Tiger·tec Gold PVD coating for long tool life Suitable for Stahl, rostfreier Stahl and Superalloys 0° negative rake for robust cutting performance Chipbreaker F57T for controlled chip formation Increased process stability through advanced coating and grade selection The combination of the Tiger·tec Gold coating and the WSP45G carbide grade yields high wear resistance and consistent edge life under thermal and mechanical load. As a PVD‑coated carbide insert, it supports elevated cutting speeds while preserving the cutting edge, which in turn reduces downtime for index changes and tool handling. For operations on unalloyed and alloyed Stahl, the coated substrate facilitates predictable chip formation and lowers the risk of built‑up edge. When machining rostfreier Stahl, the grade’s toughness helps prevent premature chipping during the typically adhesive cutting process. Robust geometry that tolerates heavy cuts and interrupted machining The insert’s 0° negative rake geometry provides a reinforced cutting edge suitable for heavy axial engagement and interrupted cuts. The 0.4 mm corner radius balances edge strength and surface finish, delivering acceptable machined surface quality while increasing resistance against chipping. The integrated F57T chipbreaker is engineered to control swarf in a wide range of feeds, reducing the likelihood of entanglement and allowing stable metal removal rates. For applications requiring repeatable performance, this geometry reduces process variability and supports reliable cycle times. Application focus and productivity advantages in milling operations Specifically engineered for milling tasks across the ISO groups P, M and S, the insert is well suited to operations on Stahl, rostfreier Stahl and heat‑resistant superalloys or Titan components where thermal load and difficult chip behaviour are common challenges. The rectangular form and the dimensional code 07 with thickness 02 make the insert a flexible option for a range of cutter bodies and pocket designs. By selecting this insert, shops can expect improved tool life, fewer tool changes and more predictable surface results, which contributes directly to increased throughput and lower overall machining costs. For tailored grade and geometry advice regarding Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss application specifics and availability. Technical data SKU: LNHX070204-F57T-WSP45G-WALTER Article label: Fräswendeschneidplatte LNHX070204-F57T WSP45G Walter Tools Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WSP45G Designation: LNHX070204-F57T WSP45G Facts Shape: Rectangular Size code: 07 Thickness code: 02 Corner radius: 0.4 mm Rake: 0° (negative) Chipbreaker: F57T Tolerance class: H Substrate / coating: PVD-coated carbide Special features Suitable for Stahl machining Suitable for rostfreier Stahl machining Applicable to high-temperature alloys and Titan (ISO group S) Robust negative-rake geometry for interrupted cuts Optimised chip control with F57T breaker FAQ What materials is this insert suitable for? The LNHX070204-F57T WSP45G insert from Walter Tools is specified for machining Stahl, rostfreier Stahl and heat‑resistant superalloys/Titan (ISO groups P, M and S). How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold coating on the WSP45G grade increases wear resistance and thermal stability, enabling higher cutting speeds and more consistent tool life in Walter Tools milling applications. What benefit does the 0° negative rake provide? A 0° negative rake strengthens the cutting edge for heavy engagement and interrupted cuts; the geometry enhances edge stability in demanding milling operations with the Walter Tools insert. Is the chipbreaker F57T suitable for finishing passes? The F57T chipbreaker is optimised for controlled chip formation across a range of feeds and can deliver acceptable surface finishes while maintaining reliable swarf control with this Walter Tools insert. Which cutter holders are compatible with size code 07 inserts? Size code 07 inserts are commonly compatible with a broad range of indexable cutter bodies; verification of pocket dimensions for LNHX070204-F57T is recommended before selection. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used for explanation only; there is no affiliation between our company and the named manufacturers. The item offered is original and factory new.
LNHX0904PDR-L55T WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of WAK15 uncoated carbide and the L55T chipbreaker for efficient aluminium machining; the rectangular 09 format with 0° negative rake offers stable cutting and reduced material adhesion. Order directly via Metav Werkzeuge or contact the consultants for application advice. LNHX0904PDR-L55T WAK15 — Milling indexable insert for aluminium and non‑ferrous metals (Rectangular 09, 0° negative) — Walter Tools A LNHX0904PDR-L55T WAK15 milling indexable insert designed for high‑performance machining of aluminium and other non‑ferrous metals within the Walter N‑series system. Uncoated carbide WAK15 for aluminium and NE metals Rectangular 09 format with 0° negative rake L55T chipbreaker for reliable chip control Compatible with Walter N‑series milling system Faster, cleaner aluminium machining with a grade optimised for non‑ferrous metals The combination of the WAK15 grade and an uncoated carbide substrate provides a very sharp cutting edge and a low friction contact zone, specifically optimised for aluminium and other non‑ferrous materials. The included L55T chipbreaker promotes short, controllable chips and reduces the risk of material build‑up on the tool flank, which improves surface finish and decreases downtime for cleaning. For production environments where cycle times and part quality matter, this geometry supports consistent removal rates and predictable tool behaviour under moderate cutting parameters. Robust geometry for process security and repeatable tool life The rectangular 09 format combined with a 0° negative rake strengthens the cutting edge and increases resistance to edge chipping during interrupted cuts or when facing variable workpiece conditions. This results in improved process security and repeatable tool life across batches. The insert’s tolerance class H and the Walter N‑series integration ensure stable seating in compatible toolholders, reducing vibration and improving dimensional stability of produced parts. The negative rake also allows slightly higher feed rates where required, without sacrificing edge integrity. System integration and handling benefits for the workshop As part of the Walter N‑series, this insert fits into a proven ecosystem of toolholders and support fixtures that simplify tool setup and replacement. The nominal thickness and rectangular outline permit a straightforward indexable strategy: when an edge becomes dull, the insert can be indexed or replaced to restore cutting performance quickly. For teams transitioning from solid tools to indexable systems, the uncoated carbide nature of the grade avoids coating interference in soft metals, helping to maintain predictable cutting forces and a consistent surface appearance on the finished component. For precision aluminium milling with Walter Tools' WAK15 grade and L55T chip control, contact Metav Werkzeuge for selection guidance and toolholder compatibility at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: LNHX0904PDR-L55T-WAK15-WALTER Designation: LNHX0904PDR-L55T WAK15 Product type: Fräswendeschneidplatte Brand: Walter Tools Series: Walter N‑Sortensystem Numbers / Core technical data Format: Rectangular Size: 09 Thickness: 04 Free angle: 0° (negativ) Tolerance class: H Designs / Special features Grade: WAK15 (uncoated carbide) Chipbreaker: L55T Execution: X Application: aluminium and non‑ferrous metals (ISO group N) System compatibility: Walter N‑series FAQ What materials is this insert suitable for? The LNHX0904PDR-L55T WAK15 insert is designed primarily for aluminium and other non‑ferrous metals; the WAK15 grade and L55T chipbreaker reduce material adhesion and improve surface finish. Is the insert coated or uncoated? This milling insert uses an uncoated carbide grade (WAK15), chosen to maintain sharp cutting edges and low friction when machining soft, adhesive materials. What does the 0° negative rake mean for machining? A 0° negative rake provides a stronger cutting edge and better resistance to chipping during interrupted cuts, enhancing process security and repeatable tool life with this insert. Which tool system accepts this insert? The insert is part of the Walter N‑series and is compatible with corresponding Walter toolholders that accept a rectangular 09 insert with this geometry. How does the L55T chipbreaker affect chip control? The L55T chipbreaker produces short, controllable chips when machining aluminium and similar materials, reducing the risk of entanglement and improving machine and operator safety. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer (Walter Tools).
LNHX0904PDR-L55T WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of robust cutter geometry, a coated carbide grade for reliable edge life and consistent chip control to maintain productive milling cycles; order the required inserts directly via Metav Werkzeuge or consult the technical team for cutting data and application advice. LNHX0904PDR-L55T WHH15X milling insert (rectangular, 0° negative rake) by Walter Tools The LNHX0904PDR-L55T WHH15X is a rectangular milling insert intended for productive general milling operations where stable chip formation and predictable tool life are required. WHH15X coated carbide for stable edge life L55T chipbreaker for consistent chip control Rectangular format, size 09, thickness 04 0° negative rake for robust cutting action Consistent performance from a purpose-designed grade and chipbreaker The combination of the WHH15X coating and the L55T chipbreaker delivers predictable chip formation and extended edge life under varying cutting conditions. The coated carbide substrate provides wear resistance while the specifically profiled chipbreaker promotes short, controllable chips, reducing rework and machine stoppages. This technical pairing supports higher process stability in serial milling and helps increase overall plant throughput. Stable clamping and cutting geometry for reliable results The insert’s rectangular format and 0° negative rake geometry create a robust cutting edge that resists edge chipping during interrupted cuts and heavy engagement. With format 09 and thickness 04, the geometry contributes to repeatable positioning in standard pocket clamps and reduces the need for frequent adjustments. The design is aimed at maintaining consistent dimensional tolerances on machined components, supporting quality assurance requirements in production environments. Practical application guidance and material suitability The grade is specified as coated carbide and users are advised to verify suitability against the product matrix for specific workpiece materials and cutting conditions. Given the broad application intent of this series, the insert can be deployed across general milling tasks; however, matching cutting speed, feed and depth of cut to the selected grade ensures optimal life. For tailored recommendations, cutting parameters and test data can be provided by technical advisers to align the insert with particular alloys and processes. Process benefits: repeatability, reduced downtime and quality focus Tolerance class H and the standardised form of the insert support repeatable replacement cycles and predictable process windows. Using a uniform indexable insert series simplifies tool management and spare-part stock keeping, which reduces downtime and administrative overhead. The clearly defined geometry and grade selection contribute to consistent surface finish and dimensional accuracy, supporting lean production targets and reliable batch conformity. Contact Metav Werkzeuge for specific cutting data, delivery options and to secure Walter Tools LNHX0904PDR-L55T WHH15X inserts for immediate integration into production. Technical Data SKU: LNHX0904PDR-L55T-WHH15X-WALTER Product designation: LNHX0904PDR-L55T WHH15X Product type: milling insert Manufacturer: Walter Tools Facts Format: 09 Thickness: 04 Free rake angle: 0° (negative) Tolerance class: H Special features Grade: WHH15X (coated carbide) Chipbreaker: L55T Shape: rectangular Series: Walter Schneidstoffsorte - Serie offen Material: catalogue dependent Note: Check product matrix for material suitability FAQ What materials is the insert suitable for? The WHH15X grade is a coated carbide formulation; the LNHX0904PDR-L55T WHH15X insert should be checked against the manufacturer’s product matrix to confirm suitability for specific materials and hardness ranges. How does the L55T chipbreaker affect machining? The L55T chipbreaker is designed to produce short, consistent chips, improving chip evacuation and protecting the cutting edge, which supports continuous machining and reduces the risk of built-up edge. What operational advantages does the 0° negative rake provide? A 0° negative rake increases edge robustness for interrupted cuts and heavy milling engagements, resulting in greater resistance to chipping and more stable cutting in demanding operations. Is the insert compatible with standard clamping systems? The rectangular format (format 09) and the standardised geometry of this insert enable mounting in common rectangular pocket clamps; tolerance class H supports repeatable seating and exchange. How to obtain cutting data for optimal performance? Cutting data tailored to the LNHX0904PDR-L55T WHH15X insert can be provided by Metav Werkzeuge’s technical team to ensure optimal speeds, feeds and depths of cut for the intended application. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer.
LNHX0904PDR-L55T WPM15G WPM15G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating, the L55T chipbreaker and a 0° negative rake that deliver reliable chip control, extended tool life and stable milling performance; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. LNHX0904PDR-L55T WPM15G indexable milling insert — Tiger‑tec Gold, L55T chipbreaker — Walter Tools LNHX0904PDR-L55T WPM15G is a rectangular indexable milling insert designed for productive milling tasks where tool life and chip control are critical Tiger‑tec Gold coating for extended tool life L55T chipbreaker for controlled chip formation Rectangular form with 0° negative rake for stability WPM15G grade, coated carbide for broad suitability Consistent productivity through optimised wear resistance and coating technology The combination of the Tiger‑tec Gold coating and the WPM15G grade provides a balanced response to wear mechanisms encountered in milling. Coated carbide offers higher thermal and mechanical resistance compared with uncoated grades, which results in longer tool life and fewer tool changes on the shop floor. For shops aiming to reduce machine downtime, this means a measurable increase in productive cutting hours and lower per-part tooling cost. Reliable chip control and cutting stability for safer, faster machining The integrated L55T chipbreaker is engineered to shape and eject chips predictably during milling, reducing rework and risk to the workpiece. Paired with a 0° negative rake, the rectangular geometry delivers a stable cutting action that is less prone to vibration in interrupted cuts. This stability supports higher feed rates and reliable surface finish without compromising tool life, so production processes can be pushed for better throughput. Practical application guidance and holder compatibility This insert’s rectangular form and defined 09 × 04 dimensions suit a range of milling systems; selection of a matching toolholder with the correct pocket geometry ensures clamping security and repeatable results. When planning a cutting operation, consider the workpiece material and cutting conditions: the coated carbide grade is intended for a wide material spectrum—verify suitability against the supplier’s product matrix for optimal results. Proper coolant strategy and stable fixturing further enhance performance. Series reliability and benefits for process engineers Belonging to the Tiger‑tec Gold family, this insert follows Walter Tools’ emphasis on consistent edge quality and reproducible results. The WPM15G grade is designed to offer broad applicability across common milling tasks while maintaining stable chip formation. For process engineers, this translates into predictable tool life, fewer unexpected tool failures and improved process capability, supporting both small-batch flexibility and higher-volume production. Discuss Walter Tools' Tiger‑tec Gold advantages with Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm holder compatibility and secure supply of the LNHX0904PDR-L55T WPM15G insert Technical data Article number / SKU: LNHX0904PDR-L55T-WPM15G-WALTER Label: Fräswendeschneidplatte LNHX0904PDR-L55T WPM15G Walter Tools Series: Tiger‑tec Gold Facts Plate size: 09 Plate thickness: 04 Free rake angle: 0° (negative) Tolerance class: H Special features Coating: Tiger‑tec Gold (coated carbide) Chipbreaker: L55T Shape: Rectangular Grade: WPM15G Execution: X Material: catalogue dependent FAQ What materials is this insert suitable for? The LNHX0904PDR-L55T WPM15G insert uses a coated carbide grade intended for broad material coverage; suitability must be checked against the product matrix for specific workpiece materials. How does the L55T chipbreaker affect milling performance? The L55T chipbreaker improves chip control and evacuation, which reduces rework and supports stable cutting conditions during interrupted and continuous milling. Is the 0° negative rake suitable for heavy cuts? A 0° negative rake increases cutting edge strength and stability, making the insert appropriate for heavier engagement and less deflection in demanding operations. Which toolholders are required for this rectangular insert? A toolholder with a compatible rectangular pocket and correct clamping geometry is required to secure the insert and maintain repeatable positioning in the cutter body. Is this an original Walter Tools product? This indexable insert is supplied as an original factory-new Walter Tools product; refer to the SKU for exact identification. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners and are mentioned here for explanatory purposes only. There is no affiliation between our company and the mentioned trademark owners. The offered item is original, factory-new merchandise from the manufacturer.
LNHX120604R-L65T WSM45X WSM45X Wendeplatten - Walter Tools
Take advantage of coated carbide reliability and optimised chip control for consistent, productive machining of demanding alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. LNHX120604R-L65T WSM45X – Milling indexable insert for rostfreier Stahl and heat-resistant superalloys | Walter Tools LNHX120604R-L65X WSM45X is a rectangular milling indexable insert engineered for heavy-duty work on rostfreier Stahl and high-temperature alloys, combining a robust coated carbide grade with an L65T chipbreaker for reliable machining. *Coated carbide grade WSM45X for tough materials *Optimised L65T chipbreaker for stable chip control *Negative 0° rake for secure heavy-duty cutting *Rectangular insert, 12 mm size with 0.4 mm radius High-performance grade for challenging materials The WSM45X grade is a coated carbide composition developed for applications involving rostfreier Stahl and heat-resistant superalloys, offering an excellent balance between wear resistance and edge stability. This makes the insert suitable where temperature-induced softening and work hardening can otherwise shorten tool life. Using the right grade reduces unplanned interruptions and supports a steady metal-removal rate, which in turn improves overall process reliability and productivity on demanding components. Stable chip control and secure cutting geometry Equipped with the L65T chipbreaker and a negative 0° rake, the insert promotes consistent chip formation and safe, vibration-resistant cutting under elevated forces. The chipbreaker geometry channels swarf away from the cutting zone, lowering the risk of built-up edge and improving surface finish. As a result, operators and process planners gain measurable benefits in machine uptime and repeatable component quality, especially during tough turning or face milling operations on stainless and heat-resistant alloys. Rectangular form for clamping security and edge utilisation The rectangular insert shape with a 0.4 mm corner radius and 12 mm size is designed for secure clamping and predictable cutting engagement. This geometry supports high cutting forces and allows stable indexing, so each edge maintains consistent performance over its service life. The combination of form and finish helps to reduce chatter and ensures that the insert remains the dependable choice for production and maintenance machining where repeatability and dimensional stability matter. Practical advantages in workshop workflows As a milling insert from Walter Tools, the product shows strengths in long runtimes and consistent surface quality when applied correctly. The coated carbide construction increases resistance to abrasive wear, while the chip control and negative rake reduce unexpected rework. For procurement and process teams, this means fewer tool changes, better scrap rates and improved throughput—key factors when machining rostfreier Stahl and temperature-sensitive alloys. Discuss application requirements with Metav Werkzeuge for precise insert selection and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: LNHX120604R-L65T-WSM45X-WALTER Designation: LNHX120604R-L65T WSM45X Manufacturer: Walter Tools Product type: Milling indexable insert Facts Size: 12 Thickness: 06 Corner radius: 0.4 mm Free rake angle: 0° (negative) Tolerance class: H Special features Coated cemented carbide (WSM45X) Chipbreaker: L65T Rectangular insert form Series: Walter Schneidstoffsorte - Serie offen Application groups: rostfreier Stahl (M), heat-resistant superalloys and titanium (S) FAQ Is this insert suitable for rostfreier Stahl? The LNHX120604R-L65T WSM45X milling indexable insert from Walter Tools is specifically formulated for rostfreier Stahl and supports secure chip formation and edge life in such applications. What role does the L65T chipbreaker play? The L65T chipbreaker in the Walter Tools insert shapes and evacuates chips consistently, reducing built-up edge and improving surface finish during heavy or interrupted cuts. How does the negative 0° rake affect machining? A negative 0° rake provides a stronger cutting edge and greater stability under heavy loads; in the case of the LNHX120604R-L65T WSM45X this helps maintain dimensional accuracy when machining tough alloys. Can this insert handle titanium and superalloys? Yes—the WSM45X grade is designed for applications in the S group, making the insert suitable for heat-resistant superalloys and titanium when cutting parameters are adapted to the material. Walter Tools: The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
LNHX120604R-L65T WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold coating and the tough WSP45G carbide grade for reliable machining across steel, rostfreier Stahl and heat‑resistant alloys; the rectangular insert with 0° negative rake and L65T chipbreaker ensures stable chip control and predictable tool life. Order the LNHX120604R‑L65T WSP45G milling insert directly via Metav Werkzeuge or consult their advisors for application support. LNHX120604R-L65T WSP45G — Walter Tools milling indexable insert, Tiger‑tec Gold, for P / M / S machining LNHX120604R-L65T WSP45G is a rectangular milling insert from Walter Tools’ Tiger‑tec Gold family, engineered for robust, versatile performance when cutting steel, rostfreier Stahl and high‑temperature alloys. Tiger‑tec Gold PVD coating Suitable for steel, rostfreier Stahl and superalloys Rectangular form with 0° negative rake L65T chipbreaker for stable chip control Longer tool life and material versatility for productive machining The combination of the Tiger‑tec Gold coating and the WSP45G grade delivers a balance of wear resistance and toughness that addresses the common trade‑offs in milling. Designed for the ISO groups P / M / S, the insert copes with the heat and abrasive wear typical of unalloyed and alloyed steel, the work‑hardening tendency of rostfreier Stahl, and the severe conditions found in nickel‑based superalloys and titanium. This results in fewer indexings and more stable cycle times, which supports higher overall productivity on centre and reduces process variability in production environments. Predictable cutting behaviour and secure edge stability A 0° negative rake strengthens the cutting edge, allowing for heavier engagement and improved resistance to chipping under interrupted cuts. Combined with the 0.4 mm corner radius, the geometry provides a compromise between edge strength and surface finish, enabling reliable shoulder and ramping operations while maintaining dimensional control. The L65T chipbreaker is tuned to the insert geometry to promote consistent chip formation and evacuation across a range of feeds, reducing the risk of built‑up edge and facilitating safer, more predictable tool life in automated and manual milling setups. Practical integration and selection guidance for the workshop The rectangular shape and the designation LNHX120604R‑L65T make the insert straightforward to specify for modular cutter systems that accept this contour. The tolerance class H and execution X indicate manufacturing precision compatible with industrial milling holders; this supports reproducible clamping and concentricity in multi‑tooth cutters. For process planning, select cutting parameters that leverage the insert’s toughness for roughing and its coating for finishing passes. If mixed batches or material changes are frequent, this insert reduces the need for multiple tool types thanks to its broad applicability. For purchase recommendations and tailored machining advice regarding Walter Tools’ Tiger‑tec Gold inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best cutter and parameter choices for the application. Technical Data Article number / SKU: LNHX120604R-L65T-WSP45G-WALTER Product type: milling indexable insert Series: Tiger-tec Gold Grade: WSP45G Shape: rectangular Chipbreaker: L65T Designation: LNHX120604R-L65T Tolerance class: H Execution: X Facts Corner radius: 0.4 mm Free rake angle: 0° (negative) Plate size: 12 Plate thickness: 06 Special features Coating: Tiger‑tec Gold PVD (coated carbide) Material applicability: P / M / S Suitable for: steel, rostfreier Stahl, superalloys and titanium applications Geometry benefits: rectangular form, strong cutting edge, designed chip control FAQ What materials is this insert suitable for? The LNHX120604R‑L65T WSP45G insert is specified for ISO groups P / M / S, covering steel, rostfreier Stahl and heat‑resistant alloys including titanium and superalloys. How does the 0° negative rake affect cutting performance? A 0° negative rake increases edge strength and resistance to chipping, allowing the insert to withstand heavier cuts and interrupted milling while maintaining dimensional stability. When is the 0.4 mm corner radius recommended? The 0.4 mm corner radius is suited to general milling tasks requiring a balance between edge robustness and surface finish, such as shoulder milling or semi‑finishing passes. What benefit does the L65T chipbreaker provide? The L65T chipbreaker promotes controlled chip formation and evacuation, reducing the likelihood of built‑up edge and improving consistency across varying feeds and materials. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is an original, brand‑new product from the manufacturer.
LNHX120604R-L65W WSM45X Wendeplatten - Walter Tools
Take advantage of the combination of a WSM45X coated carbide grade and an optimised L65W chipbreaker for secure chip control and extended edge life; order directly via Metav Werkzeuge or ask our consultants for tailored machining advice. LNHX120604R-L65W WSM45X milling insert for stainless steels and superalloys — Walter Tools The LNHX120604R-L65W WSM45X is a coated carbide milling insert designed for demanding machining of stainless steels and heat‑resistant superalloys and titanium, offering robust edge stability and reliable chip formation. Coated carbide grade WSM45X for tough materials Optimised L65W chipbreaker for secure chips Rectangular 12 mm insert with 0.4 mm corner radius Negative 0° rake for stable cutting action Reliable grade engineered for tough materials and consistent tool life The coated cemented carbide WSM45X combines a wear‑resistant coating and a substrate optimised for high thermal and mechanical loads. When machining stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), this grade supports stable chip formation and reduces the risk of built‑up edge. Coated carbide means a thin, hard layer on the substrate that improves heat resistance and wear performance; for production this translates into fewer tool changes, more predictable tool life and consistent part quality. The design suits both roughing passes and finishing operations where edge reliability is critical. Optimised chip control and dimensional stability for efficient milling The insert’s L65W chipbreaker is configured to produce short, controllable chips under the cutting conditions typical for tough alloys. Combined with the 0.4 mm corner radius, the geometry balances edge strength and surface finish: the radius reinforces the cutting edge to resist chipping, while the chipbreaker reduces heat concentration and prevents long, stringy chips that can damage the workpiece or tool. The negative 0° rake promotes stable cutting forces and improves seat stability in face‑milling applications, which supports repeatable tolerances and lowers the scrap rate in series production. Practical benefits for workshop productivity and part quality The rectangular insert format and the specified dimensions give a reliable seating and clamping interface, simplifying index changes and minimising set‑up time. For machining centres handling stainless steels or superalloys, the insert offers a balance of process security and economical performance: fewer interruptions for tool changes, improved surface integrity and predictable consumable planning. For shops uncertain about the optimal cutting data, Metav Werkzeuge provides application advice and feed/speed recommendations to match the insert grade and holder geometry to the workpiece material. For machining tasks on stainless steels and heat‑resistant alloys, request application support from Metav Werkzeuge — consult at info@metav-werkzeuge.com or call +49 2822 7131930 to determine the best insert configuration and cutting parameters for the intended operation. Technical Data Article number: LNHX120604R-L65W-WSM45X-WALTER Name: LNHX120604R-L65W WSM45X Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Numbers / Core technical data Insert size: 12 Corner radius: 0.4 mm Thickness: 06 Rake: 0° (negative) Tolerance class: H Special features / Versions Grade: WSM45X (coated carbide) Chipbreaker: L65W Shape: Rectangular Series: Walter insert grade — open series Suitable for: stainless steels (M), heat‑resistant superalloys and titanium (S) FAQ What materials is this insert suitable for? The LNHX120604R-L65W WSM45X insert is designed for stainless steels (ISO group M) and heat‑resistant superalloys or titanium (ISO group S), offering enhanced thermal and edge stability for these demanding materials. How does the L65W chipbreaker affect machining performance? The L65W chipbreaker produces short, controlled chips that improve evacuation and reduce heat concentration, helping to maintain edge integrity and a consistent surface finish when machining tough alloys. What advantage does the 0.4 mm corner radius provide? A 0.4 mm corner radius increases edge strength and resistance to chipping, which is beneficial for interrupted cuts and heavier feed rates; it helps to extend tool life while maintaining acceptable surface quality. Is the negative 0° rake suitable for finishing operations? Yes, the negative 0° rake improves seat stability and reduces the tendency to vibrate under heavy loads; combined with the WSM45X grade, it supports stable finishing and roughing passes depending on the selected cutting data. Can this insert be used in standard rectangular tool holders? The rectangular form and standard dimensions ensure compatibility with holders designed for this insert family; verify the exact seat and clamping specifications of the toolholder to ensure correct seating and clearance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
LNHX130608R-L55T WAK15 Wendeplatten - Walter Tools
Take advantage of the combination of productive aluminium machining, reliable wear behaviour and precise chip control for consistent results in series production; source genuine Walter Tools inserts via Metav Werkzeuge or consult our specialists for application advice. LNHX130608R-L55T WAK15 milling indexable insert for aluminium and non‑ferrous metals (Walter Tools) — 0° negative clearance, L55T chipbreaker The LNHX130608R-L55T WAK15 is a rectangular milling insert engineered for high‑efficiency machining of aluminium and other non‑ferrous materials, offering robust performance and consistent chip formation in profiling and face‑milling applications. Optimised chip control L55T For aluminium and non‑ferrous metals Negative 0° clearance geometry Rectangle form with 0.8 mm corner radius Consistent aluminium machining with dedicated carbide grade The insert is built on the WAK15 uncoated carbide grade, specifically developed for non‑ferrous metals. This composition delivers a sharp, wear‑resistant cutting edge while limiting built‑up edge during aluminium machining. The integrated L55T chipbreaker improves chip evacuation and reduces the risk of material adhesion, which supports higher feed rates and stable cycle times. As a result, productivity rises without compromising component quality. Stable process and improved surface quality A negative 0° clearance and the rectangular geometry ensure a secure seat in the cutter body and predictable cutting forces. The 0.8 mm corner radius balances edge strength with the ability to produce good surface finishes on soft alloys. Together these characteristics promote repeatable results, lower scrap rates and longer tool life in medium‑ to high‑volume production. The insert’s geometry is optimised for controlled chip formation, which contributes directly to consistent surface quality. Simple integration and application scope Designed for use in the Walter N‑Series, the insert is suitable for profiling, slotting and light face milling in aluminium and other ISO group N materials. The execution code X denotes the insert’s negative geometry, compatible with a wide range of cutter bodies that accept rectangular plates. The tolerance class H supports high repeatability in indexing and re‑clamping, helping to reduce downtime and set‑up effort on automated machines and manual toolholders alike. Contact Metav Werkzeuge to discuss the suitability of Walter Tools LNHX130608R-L55T WAK15 for specific aluminium applications or to request availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: LNHX130608R-L55T-WAK15-WALTER Article designation: LNHX130608R-L55T WAK15 Manufacturer: Walter Tools Product type: milling indexable insert Series: Walter N‑Sortensystem Specifications Corner radius: 0.8 mm Free clearance angle: 0° (negative) Plate size: 13 Plate thickness: 06 Tolerance class: H Chipbreaker: L55T Materials & special features WAK15 uncoated carbide grade Walter N‑Sortensystem Application: aluminium and non‑ferrous metals (ISO 513 group N) Plate form: rectangle Execution: X (negative geometry) Optimised for chip control and reduced material adhesion FAQ Is this insert suitable for high‑feed milling of aluminium? The LNHX130608R-L55T WAK15 insert, with its L55T chipbreaker and uncoated WAK15 grade, is designed to support higher feeds in aluminium machining while maintaining chip control. Can the insert be used for other non‑ferrous metals? Yes, the insert is specified for ISO 513 group N, which covers aluminium, copper, brass and similar non‑ferrous materials. What does the negative 0° clearance mean for cutter selection? Negative 0° clearance indicates a robust geometry requiring compatible cutter bodies that are designed for negative inserts; this increases edge strength and stability during interrupted cuts. How does the 0.8 mm corner radius affect surface finish? A 0.8 mm corner radius provides a compromise between edge strength and finishing capability, giving good surface quality on softer alloys while protecting the cutting edge. What does tolerance class H imply for repeatability? Tolerance class H denotes tight manufacturing tolerances for the insert, supporting consistent seating and repeatable machining results after indexing. Hersteller: Walter Tools; Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory‑new merchandise from the manufacturer.
LNHX130608R-L55T WHH15X Wendeplatten - Walter Tools
Take advantage of the robust combination of the WHH15X coated carbide grade, the L55T chipbreaker and the rectangular format to increase process stability and predictable chip control; order or request application advice via Metav Werkzeuge for confirmation against the product matrix LNHX130608R-L55T WHH15X milling indexable insert, rectangular, L55T chipbreaker — Walter Tools The LNHX130608R-L55T WHH15X is a rectangular milling indexable insert designed for productive, reliable metalcutting where controlled chip formation and robust edge strength are required Coated carbide grade WHH15X L55T chipbreaker for controlled chips Rectangular form for stable clamping 0.8 mm corner radius, 0° negative rake Consistent chip control for higher throughput The insert is engineered around a coated carbide cutting grade that emphasises reproducible chip formation and extended tool life. The combination of the WHH15X grade and the L55T chipbreaker produces uniform chip segmentation, which reduces interruptions caused by poor chip evacuation and supports longer uninterrupted cutting cycles. This translates into measurable productivity gains in milling operations and helps maintain stable cycle times in series production. The technical design thus focuses on reducing secondary processes linked to chip management and improving overall machining efficiency. Increased edge security and wear resistance in demanding cuts A rectangular plate geometry, together with a 0° negative rake and a 0.8 mm corner radius, provides mechanical strength where it is most needed. The negative rake angle increases the effective cutting-edge support and lowers the risk of chipping under interrupted cuts or higher cutting forces, while the corner radius contributes to a sturdier cutting edge and improved wear behaviour. These characteristics are particularly useful when machining tougher materials or when encountering variable cutting conditions, as they favour repeatable surface finishes and predictable tool life. Straightforward integration into common cutter systems With an ISO designation of LNHX130608R-L55T WHH15X and a tolerance class H, the insert is suitable for integration into standard holders that accept this format; size code 13 and thickness code 06 identify its envelope for tool selection. The open-series cutting-grade description indicates a coated cemented-carbide class; suitability for specific workpiece materials should be verified against the manufacturer’s product matrix before application. Clear specification values facilitate correct toolholder matching and setup, reducing setup time and minimising the need for adjustments during commissioning. Application advice and benefits for production planners Specifying an insert from a recognised toolmaker ensures consistent batch-to-batch performance and simplifies reordering. The Walter Tools cutting-grade approach aims to combine stable edge life with broad machinability across common workpiece groups. For integrators and process engineers, the main benefits are improved process reliability, comparable surface quality and easier tool consumption planning. For any complex or high-value components, verifying the Insert’s performance in a short trial run and consulting the product matrix will support optimal grade selection and cutting parameters. Contact Metav Werkzeuge for application-specific advice on the Walter Tools LNHX130608R-L55T WHH15X insert and to confirm suitability for particular materials via the product matrix; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: LNHX130608R-L55T-WHH15X-WALTER Designation: LNHX130608R-L55T WHH15X Product type: milling indexable insert Facts Size code: 13 Thickness code: 06 Corner radius: 0.8 mm Free angle: 0° (negative) Tolerance class: H Special features Grade: WHH15X (coated carbide) Chipbreaker: L55T Shape: rectangular Series: Walter cutting grade series - open FAQ What materials is this insert intended for? The insert is supplied in the WHH15X coated carbide grade; suitability for specific materials should be checked against the Walter Tools product matrix and confirmed for the intended workpiece. How does the L55T chipbreaker influence machining? The L55T chipbreaker is designed for controlled chip segmentation, improving chip evacuation and reducing interruptions in milling operations when using the LNHX130608R-L55T WHH15X insert. What advantage does a 0° negative rake provide? A 0° negative rake increases cutting-edge support and reduces the risk of chipping during interrupted cuts, enhancing reliability under variable cutting loads. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanation and identification of compatibility; there is no affiliation or endorsement implied between Metav Werkzeuge and the mentioned manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
LNHX130608R-L55T WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPM15G grade combined with the L55T chipbreaker for stable chip control and reliable tool life; order the insert directly via Metav Werkzeuge or request application advice from the consultants. LNHX130608R-L55T WPM15G — Rectangular milling insert, Tiger‑tec Gold (Walter Tools) LNHX130608R-L55T WPM15G is a rectangular milling indexable insert designed to deliver stable chip formation and consistent surface quality in versatile milling operations Tiger‑tec Gold coated carbide Grade WPM15G for coated carbide Rectangular insert with 0.8 mm radius Chipbreaker L55T for controlled chips Enhanced process stability and predictable tool life The combination of the Tiger‑tec Gold coating and the WPM15G grade provides a robust, coated carbide solution that supports consistent cutting performance. This construction reduces premature edge wear under standard milling conditions, resulting in more predictable change intervals and fewer unscheduled tool changes. The technical design emphasises repeatable behaviour in series production, making the insert a suitable choice where steady output and surface quality matter. Check the product matrix for precise workpiece suitability. Geometry and chip control that improve throughput The rectangular form with a 0.8 mm corner radius and the integrated L55T chipbreaker combine to produce stable chip formation and reliable evacuation. The negative 0° rake helps maintain edge strength during interrupted cuts or heavier radial engagement, which supports operational robustness in common milling tasks. These geometric traits translate into fewer interruptions for rework and a smoother production flow, particularly in applications that demand repeatable edge behaviour rather than aggressive material removal. Practical application guidance and material suitability Material compatibility for this insert is catalogue-dependent; suitability must be confirmed against the specific product matrix before selection. The designation and series information make it straightforward to match the insert to the appropriate holder and process: the insert is offered with the designation LNHX130608R-L55T and belongs to the Tiger‑tec Gold series. For customers seeking reliable milling performance with a coated-carbide solution, the insert offers a balance of edge stability and chip control suited to a wide range of general machining tasks. Contact Metav Werkzeuge for availability and tailored application advice on the Walter Tools LNHX130608R-L55T WPM15G insert — eMail: info@metav-werkzeuge.com; Phone: +49 2822 7131930 Technical data SKU: LNHX130608R-L55T-WPM15G-WALTER Designation: LNHX130608R-L55T WPM15G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Core dimensions Plate size: 13 Corner radius: 0.8 mm Thickness code: 06 Relief / rake angle: 0° (negative) Tolerance class: H Design & features Shape: Rectangular Chipbreaker: L55T Grade: WPM15G (coated carbide) Execution: X Material: Catalogue-dependent FAQ Which materials is this insert suitable for? Suitability depends on the specific grade and machining matrix; the LNHX130608R-L55T WPM15G insert uses the Tiger‑tec Gold coated carbide grade and requires verification against the product matrix to confirm compatibility with the intended material. What effect does the 0.8 mm corner radius have on machining? A 0.8 mm radius supports improved edge strength and helps achieve a consistent surface finish while reducing the risk of chipping at the corners during standard milling operations. Is the insert designed for positive or negative rake applications? The insert is manufactured with a 0° negative rake, which enhances edge robustness for applications with interrupted cuts or heavier engagement, contributing to stable performance. What role does the L55T chipbreaker play? The L55T chipbreaker is engineered to promote controlled chip formation and evacuation, improving process reliability and reducing the likelihood of chip-related interruptions. How is the insert identified for ordering and integration? The insert is listed as LNHX130608R-L55T WPM15G (Walter Tools) and should be matched with the appropriate tool holder and clamping system according to the holder manufacturer’s instructions. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools), with headquarters in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
LNHX1306PDR-L55T WAK15 Wendeplatten - Walter Tools
Take advantage of a purpose-built solution for non-ferrous machining that combines a sharp, uncoated carbide grade with an optimised chipbreaker geometry for reliable productivity. The rectangular insert with a 0° negative rake and L55T chipbreaker ensures stable chip formation and repeatable results — order directly via Metav Werkzeuge or contact our consultants for application advice. LNHX1306PDR-L55T WAK15 – Milling indexable insert for aluminium machining, Walter Tools A compact milling insert designed for non-ferrous metals, the LNHX1306PDR-L55T WAK15 serves as a robust choice for aluminium and similar materials in the Walter N-system. Uncoated carbide grade WAK15 Optimised L55T chipbreaker geometry Rectangular 13 size, thickness 06 0° negative rake for secure cutting Increased process reliability when machining aluminium The combination of the WAK15 uncoated carbide grade and a sharp-edge geometry targets machining of aluminium and related non-ferrous alloys. Uncoated carbide provides a sharp cutting edge that reduces friction and the tendency for material to weld onto the tool, which is critical when working with sticky materials. The built-in L55T chipbreaker promotes controlled chip formation, decreasing the risk of built-up edge and improving tool life. These factors translate into a more consistent machining process and less unplanned downtime. Better chip control for improved surface finish Controlled chips reduce interruptions and protect the workpiece surface. The L55T chipbreaker is designed to fragment and evacuate chips efficiently, which helps maintain a clean cutting zone and contributes to a superior surface finish on non-ferrous components. The 0° negative rake increases edge security in interrupted or light finishing cuts, balancing cutting forces and offering a predictable behaviour that supports repeatable part quality. System compatibility and accurate seating for consistent results Engineered for the Walter N-system, the insert conforms to a high tolerance class H, ensuring a precise fit in compatible milling cutters. Accurate seating reduces vibration and runout, providing repeatable indexability and straightforward corner reversal when an edge is resharpened or rotated. The rectangular format and standard series designation make tool planning and inventory management easier in production environments. Practical application notes and material guidance This insert is specifically intended for aluminium and other non-ferrous materials; it is not specified for steel or stainless applications. When selecting cutting parameters, favour moderate speeds with appropriate feeds for chip evacuation and surface integrity. The designation indicates an uncoated carbide grade optimised for low adhesion; where coolant or air blast is available, chip clearance becomes even more effective. For customised parameter recommendations, refer to cutting data from the toolholder manufacturer or consult Metav Werkzeuge for tailored guidance. Discuss application requirements and request an offer from Metav Werkzeuge for the Walter Tools LNHX1306PDR-L55T WAK15 insert to optimise non-ferrous machining processes. Technical Data SKU: LNHX1306PDR-L55T-WAK15-WALTER Label: Fräswendeschneidplatte LNHX1306PDR-L55T WAK15 Walter Tools Manufacturer: Walter Tools Facts Plate size: 13 Plate thickness: 06 Rake angle: 0° (negative) Tolerance class: H Special features Grade: uncoated carbide WAK15 Chipbreaker: L55T Plate form: Rectangular Series: Walter N-Sortensystem Suitable for: Aluminium and non-ferrous metals FAQ What materials is this insert suitable for? The LNHX1306PDR-L55T WAK15 insert is intended for aluminium and other non-ferrous metals, using the uncoated carbide grade to reduce adhesion and improve edge life. Does this insert require a coating for aluminium machining? No; the WAK15 designation denotes an uncoated carbide grade optimised for non-ferrous work, so a coating is not necessary for the intended materials. How does the L55T chipbreaker affect machining? The L55T chipbreaker promotes controlled chip formation and evacuation, which reduces built-up edge and supports a consistent surface finish during milling. Is the insert compatible with Walter N-series toolholders? Yes; the insert is part of the Walter N-system and is produced to a tolerance class H for accurate seating in compatible cutters. What does a 0° negative rake mean in practice? A 0° negative rake increases cutting-edge security, particularly in interrupted cuts or light finishing passes, offering a compromise between sharpness and robustness. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, brand-new product from the manufacturer. The Walter AG (brand: Walter Tools) is part of the Sandvik Group and is known for precision tooling and engineering solutions.
LNHX1306PDR-L55T WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of the WHH15X coated-carbide grade and the L55T chipbreaker for controlled chip formation and steady tool life; the rectangular design with 0° (negative) relief supports secure clamping and repeatable performance. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. LNHX1306PDR-L55T WHH15X — Milling indexable insert, rectangular, L55T chipbreaker (Walter Tools) The LNHX1306PDR-L55T WHH15X is a rectangular milling indexable insert engineered for reliable, general milling tasks where controlled chip formation and consistent edge life are required. Coated carbide WHH15X for wear resistance L55T chipbreaker for predictable chips Rectangular shape with 0° (negative) relief Tolerance class H for interchangeability Predictable production performance through material and geometry The coated-carbide WHH15X grade and the defined L55T chipbreaking geometry are combined to give stable cutting behaviour in series production. The insert’s rectangular outline and 0° (negative) relief support secure seating in robust toolholders, which helps to reduce vibration and maintain dimensional accuracy across batches. For process planners this translates into fewer tool changes and more consistent part quality over time. Controlled chip formation for safer, efficient machining Integrating a dedicated chipbreaker simplifies swarf evacuation and reduces the risk of long, entangling chips that can compromise surface finish or tool life. The L55T geometry is optimised for reliable fragmentation under a range of cutting parameters, encouraging steady machining feeds and minimised interruptions. By focusing on chip control, the insert supports improved cycle times and operator safety without complex setup changes. Compatibility and straightforward selection for workshop use The insert is supplied in the LNHX1306PDR-L55T designation and follows a clear series definition from Walter Tools, helping production engineers to match grades and geometries across tool families. Material suitability should be checked against the supplier’s product matrix to confirm the best match for specific workpiece alloys; the WHH15X grade is a coated carbide class intended for a broad set of milling tasks where coated grades are advantageous. Process stability and handling benefits for daily operation Tolerance class H and a standardised plate thickness ensure consistent fit and repeatable indexing when inserts are rotated or exchanged. This repeatability reduces setup time and supports predictable maintenance intervals. The combination of geometry, grade and form is aimed at delivering measurable productivity benefits: more parts per tool life and fewer monitoring interventions during high-volume milling. For technical advice, availability and to place enquiries about Walter Tools inserts like the WHH15X grade, contact Metav Werkzeuge for tailored recommendations and local delivery options — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: LNHX1306PDR-L55T-WHH15X-WALTER Description: Fräswendeschneidplatte LNHX1306PDR-L55T WHH15X Walter Tools Manufacturer: Walter Tools Facts Plate size: 13 Plate thickness: 06 Relief angle: 0° (negative) Tolerance class: H Special features Chipbreaker: L55T Grade: WHH15X (coated carbide) Plate form: Rectangular Series: Walter Schneidstoffsorte - Serie offen Designation: LNHX1306PDR-L55T ISO designation: LNHX1306PDR-L55T WHH15X Material: Katalogabhängig FAQ What is the primary benefit of the WHH15X grade? The WHH15X coated-carbide grade provides enhanced wear resistance and stable cutting performance for milling applications where a coated grade is preferred. Which chip behaviour can be expected from the L55T breaker? The L55T chipbreaker is designed for controlled fragmentation to improve chip evacuation and maintain consistent surface finishes during milling. Is the insert suitable for any specific material range? Material suitability should be verified against the Walter Tools product matrix; the insert’s WHH15X grade is a coated carbide class intended for a broad set of milling tasks. How does the 0° (negative) relief affect toolholding? A 0° (negative) relief increases edge strength and requires robust clamping but yields improved resistance to edge chipping and higher process reliability under moderate to heavy milling loads. What does tolerance class H mean for workshop practice? Tolerance class H indicates tighter dimensional limits for improved interchangeability and repeatable seating when inserts are exchanged or indexed. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com