P26339R25 WPP35G WPP35G Wendeplatten - Walter Tools
Taking advantage of the Tiger‑tec Gold coating and a coated carbide substrate, this milling insert delivers stable chip formation and extended tool life for steel machining; order the P26339R25 WPP35G directly via Metav Werkzeuge or consult Metav Werkzeuge’s specialists for application advice. P26339R25 WPP35G — milling insert (Tiger‑tec Gold) for steel — Walter Tools The P26339R25 WPP35G is a coated carbide milling insert from the Tiger‑tec Gold series, engineered to provide reliable performance and predictable results in steel (ISO P) milling applications. Tiger‑tec Gold coating for extended tool life Coated carbide grade WPP35G for steel machining Stable chip formation and consistent surface finish Suitable for a wide range of steel grades Increase throughput with durable, predictable performance The combination of a coated carbide substrate and the Tiger‑tec Gold technology provides a strong foundation for sustained milling performance. The coating improves thermal stability at the cutting edge, which leads to longer tool life under continuous operation and reduces the frequency of tool changes. As a result, process uptime and productivity rise, while the cost per component falls. This benefit is particularly relevant in production environments and job shops where extended runs and repeatable results are required. Optimised for steel (ISO P): better chip control and surface quality Designed for machining materials classified under ISO P (steel), the insert’s geometry and grade suit both unalloyed and alloyed steels. The WPP35G grade is tuned to balance wear resistance and toughness, promoting stable chip formation and reducing built-up edge. That stability supports a consistent surface finish even during heavier material removal, simplifying downstream operations and inspection. Technical users unfamiliar with coating technology will find the practical advantage clear: improved edge retention under the thermal and mechanical loads typical of steel cutting. Process security through consistent edge performance Repeatability is a central requirement for high-volume machining. The insert’s construction and grade control flank wear and support a predictable tool-life window, which helps to plan maintenance and minimise unscheduled stops. Thanks to the thermal and chemical properties of the Tiger‑tec Gold system, the cutting edge maintains integrity across varying cut conditions, offering process security and fewer scrapped parts. For production engineering teams, the result is more reliable cycle times and easier quality assurance. Practical applications and workshop benefits This milling insert suits general and semi‑finishing milling operations in mechanical engineering and subcontract manufacturing where steel predominates. Its balanced properties make it a good choice for both slotting and peripheral milling where stable chips and tool life matter. Using a standardised grade across series simplifies tool management and inventory: fewer tool variants, predictable performance and a streamlined selection process for purchasing and toolroom staff. The association with Walter Tools supports expectations of consistent manufacturing standards and availability. Contact Metav Werkzeuge for availability and technical consultation on Walter Tools inserts, including application advice and selection support—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: P26339R25-WPP35G-WALTER Article designation: P26339R25 WPP35G Product type: milling insert Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Material code: P Application group: ISO P (steel) Grade: WPP35G Product label: P26339R25 WPP35G Special features Coating technology: Tiger‑tec Gold Substrate: coated carbide Designed for: steel machining (ISO P) Balanced wear resistance and toughness FAQ What materials is this insert suitable for? The P26339R25 WPP35G insert is specified for steel machining (ISO P) and is optimised for the heat and chip characteristics typical of unalloyed and alloyed steels. How does the Tiger‑tec Gold coating help in production? Tiger‑tec Gold improves thermal stability and wear resistance of the coated carbide grade, meaning the WPP35G insert maintains edge life longer and yields more consistent performance in serial milling tasks. Can this insert be used for finishing and semi‑finishing? Yes; the design and grade combination of the insert support both semi‑finishing and finishing passes where stable chip control and surface quality are required. Is the WPP35G grade suitable for high cutting speeds? The coated carbide composition and Tiger‑tec Gold coating are intended to enhance high‑performance cutting behaviour, making the grade appropriate for demanding steel milling where elevated cutting parameters are applied. What should be expected in terms of chip control? The insert promotes stable chip formation under typical steel cutting conditions, reducing the risk of irregular chips that can affect surface quality and tool life. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only and indicate no commercial relationship between Metav Werkzeuge and the named manufacturers. The offered item is an original, brand‑new product supplied by the manufacturer Walter Tools.
P26339R25 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger-tec Gold coating and the heat-resistant WSM35G grade for consistent performance in demanding milling tasks; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. P26339R25 WSM35G indexable milling insert by Walter Tools — Tiger-tec Gold coated, suited for rostfreier Stahl P26339R25 WSM35G is an indexable milling insert designed for productive machining of rostfreier Stahl and heat-resistant alloys in industrial milling applications Tiger-tec Gold coating for extended tool life Optimised for rostfreier Stahl and superalloys Coated solid carbide grade WSM35G Reliable edge stability under high heat Stable machining of rostfreier Stahl and superalloys for fewer interruptions The coated carbide WSM35G grade, applied within the Tiger-tec Gold series, is formulated to manage the demands of machining rostfreier Stahl and heat-resistant superalloys. These workpiece groups tend to produce high cutting temperatures and promote built-up edge; the combination of a wear-resistant coating and a thermally stable substrate promotes consistent chip formation and reduces the frequency of unexpected tool changes. This leads to a more predictable production flow and fewer process interruptions in mixed‑material batches. Improved tool life and maintained cutting performance under thermal load A key advantage of this insert is its edge stability under elevated temperatures. The coating system reduces abrasive wear and protects the cutting edge from premature failure, translating into longer service intervals and more economical machining cycles. For operations where changeover time and tool consumption affect overall throughput, the insert’s thermal resilience supports sustained cutting performance and contributes to a lower cost per finished component. Predictable behaviour across ISO groups M and S for application planning The insert is suitable for ISO group M (rostfreier Stahl) and S (heat-resistant superalloys and titanium), which indicates design optimisation for materials that either soften at elevated temperatures or conduct heat poorly. Understanding these classifications helps process planners select cutting parameters that prioritise process reliability and surface quality. The regular geometry and repeatable indexable format ensure consistent results each time an edge is indexed, so machine setups remain stable across production runs. Practical integration into milling toolsets and production workflows As an indexable milling insert, the component is compatible with a wide range of cutter bodies that accept the P26339R25 form factor. The standardised format simplifies inventory management and reduces lead times for replacements. Combined with manufacturer-grade materials and coating technology, the insert supports productive machining strategies where both component quality and machine uptime are critical. For complex jobs, pairing the insert with appropriate cutter geometries and cutting data will further unlock performance benefits. For robust and predictable machining of rostfreier Stahl with Walter Tools' Tiger-tec Gold grade, contact Metav Werkzeuge for tailored application advice and availability. Technical data Article number: P26339R25-WSM35G-WALTER Name: Fräswendeschneidplatte P26339R25 WSM35G Walter Tools Manufacturer: Walter Tools Product type: Indexable milling insert Series designation: Tiger-tec Gold Grade: WSM35G Facts Material group designation: S / M Suitable for rostfreier Stahl: yes SKU / UID: P26339R25-WSM35G-WALTER Special features Coated carbide (beschichtetes Hartmetall) Optimised for rostfreie Werkstoffe and heat-resistant alloys Designed for stable chip formation and edge retention Part of the Tiger-tec Gold coating technology FAQ What materials is this insert suitable for? The P26339R25 WSM35G insert is designed primarily for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), delivering improved chip control and edge life in these materials. How does the Tiger-tec Gold coating benefit machining? The Tiger-tec Gold coating on the WSM35G grade increases wear resistance and thermal stability, which helps maintain cutting-edge geometry and extends the insert’s usable life during continuous milling operations. Can the insert be used in standard indexable milling cutters? Yes, the P26339R25 form factor fits cutter bodies designed for this insert type; the standardised geometry supports straightforward replacement and repeatable machining performance. Does the insert improve process reliability? By combining a durable substrate with the Tiger-tec Gold coating, the insert enhances process reliability through predictable wear behaviour and reduced risk of built-up edge, particularly when machining rostfreier Stahl. Where can specification advice and application recommendations be obtained? Metav Werkzeuge provides application guidance and can assist with selecting the correct insert geometry and cutting parameters for specific milling tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (marketed as Walter Tools), with headquarters in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and forms part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is an original, factory-new product from the manufacturer.
P26339R25 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and robust edge stability for reliable milling of Stahl, rostfreier Stahl and heat‑resistant alloys; the result is consistent productivity and fewer tool changes. Order the insert through Metav Werkzeuge or consult the team for application advice. P26339R25 WSP45G milling insert — Tiger·tec Gold coated carbide for versatile milling, Walter Tools P26339R25 WSP45G is a coated milling insert designed for demanding metalcutting tasks across multiple material groups Tiger·tec Gold PVD coating Versatile for Stahl and rostfreier Stahl Stable cutting edge for high productivity Suitable for heat‑resistant alloys and Titan Reliable productivity through coating and chip control The combination of the Tiger·tec Gold coating and the substrate delivers improved wear resistance and edge stability, which translates into longer tool life and fewer interruptions on the shopfloor. The coating technology is a PVD system optimised for milling; it reduces adhesion and supports controlled chip formation when cutting Stahl and rostfreier Stahl. For workshop planners this means a measurable improvement in process reliability and reduced downtime for insert changes. Material range and application benefits explained This grade is intended for the ISO groups P / M / S, which corresponds to unalloyed and alloyed Stahl, rostfreier Stahl, and heat‑resistant superalloys or Titan. The formulation supports secure chip formation in tough, adhesive materials and maintains a stable cutting edge under thermal load. In practical terms, the insert enables higher average cutting parameters in semi‑finish and finish milling operations while maintaining surface quality and repeatability. How the insert improves operational efficiency By offering a balance of toughness and wear resistance, the geometry and coating reduce the tendency for built‑up edge and flank wear during interruptive milling or mixed‑material batches. The design promotes consistent chip evacuation, lowering the risk of rework and saving cycle time. For production engineers, this translates into a better cost‑to‑performance ratio and more predictable machining windows, which helps meet throughput targets without sacrificing surface integrity. Hard facts for process planning and tool selection The grade WSP45G is a beschichtetes Hartmetall variety within the Tiger·tec Gold family and is tailored to milling applications where a combination of productivity and process security is required. Its versatility across P, M and S materials allows for simplified tooling lists and fewer grade changes across job lots. When selecting parameters, take into account the workpiece material group and the cutter body to fully exploit the insert’s thermal and mechanical advantages. For a tailored recommendation on tooling or process parameters, contact Metav Werkzeuge for application support and ordering details via email or phone. Technical Data SKU: P26339R25-WSP45G-WALTER Article designation: P26339R25 WSP45G Product type: Fräswendeschneidplatte (milling insert) Series: Tiger-tec Gold Grade: WSP45G Manufacturer: Walter Tools Material groups: P / M / S Material substrate: beschichtetes Hartmetall Facts Net numerical data: none provided in source Special features Tiger·tec Gold PVD coating WSP45G cutting grade Suitable for Stahl and rostfreier Stahl Applicable to heat‑resistant alloys and Titan Designed for secure chip formation and stable edges FAQ What materials can this insert machine effectively? The P26339R25 WSP45G insert is specified for ISO groups P, M and S, which covers Stahl, rostfreier Stahl and heat‑resistant alloys such as Titan, so it is suitable for a broad material range in milling applications. Is the insert coated and what advantage does the coating give? Yes — the insert uses the Tiger·tec Gold PVD coating; this provides improved wear resistance and reduced adhesion, enhancing edge stability and extending service life under milling conditions. For which milling applications is this grade recommended? The grade excels in semi‑finish and finish milling where a balance of toughness and wear resistance is required; it helps maintain surface quality and reduces the frequency of index changes in batch production. How does this insert contribute to process stability? The combination of geometry and beschichtetes Hartmetall substrate minimises built‑up edge and supports consistent chip evacuation, resulting in steadier cutting forces and fewer unexpected tool‑related stoppages. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany, info@walter-tools.com Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26379-R10 WSP45G Wendeplatten - Walter Tools
Take advantage of a combination of durable Tiger·tec Gold coating, precise R10 chip control, and broad material capability for consistent milling productivity; order the insert directly via Metav Werkzeuge or consult the specialists for compatibility and stocking. P26379-R10 WSP45G – Milling insert (Tiger·tec Gold) by Walter Tools A P26379-R10 WSP45G milling insert for high-performance machining in Stahl, rostfreier Stahl and heat-resistant alloys Tiger·tec Gold PVD coating for edge stability Suitable for Stahl, rostfreier Stahl and superalloys R10 chipbreaker for consistent chip control High wear resistance and extended tool life Reliable cutting performance across common alloys The P26379-R10 WSP45G insert is engineered for stable, high-productivity milling. Its Tiger·tec Gold surface, a specialised PVD coating on coated carbide, offers improved resistance to abrasion and thermal loading, which translates into edge stability under intermittent and continuous cuts. Because the grade is tuned for the P/M/S groups, it supports safe chip formation and predictable wear behaviour when machining Stahl, rostfreier Stahl and superalloys, reducing unplanned tool changes and improving throughput. Better chip control and surface quality The integrated R10 chipbreaker is designed to fragment and evacuate chips effectively during milling, which lowers the risk of built-up edge and enhances process security. Consistent chip formation helps achieve a superior surface finish and reduces rework. In practical terms, the chip geometry and the insert’s edge preparation mean fewer interruptions for cleaning or tool correction, enabling stable cycle times and more reproducible component quality. Cost-efficiency through longer tool life Optimised wear resistance and a robust cutting edge reduce the frequency of index changes, lowering cost per workpiece. The combination of the grade’s toughness and the coating’s heat resistance prolongs tool life, particularly in demanding applications involving stainless steels and heat-resistant alloys. This makes the insert an economical choice for both batch production and series machining where machine uptime and predictable tool consumption are priorities. Practical application and integration notes The designation P26379-R10 indicates the insert family and the R10 chipbreaker geometry for milling holders that accept this style. The grade WSP45G is a versatile PVD-coated carbide that fits a wide range of shoulder and face milling operations. For retrofit or new-tool setups, matching insert seat and clamping system is essential to fully exploit the coating and chipbreaker design. For specific cutter compatibility and recommended cutting data, consult the technical advisors at Metav Werkzeuge. For specification support and to secure the Tiger·tec Gold WSP45G insert from Walter Tools for production-critical milling, contact Metav Werkzeuge to discuss integration, availability and recommended cutting data Technical Data Item number: P26379-R10-WSP45G-WALTER Designation: P26379-R10 Article name: P26379-R10 WSP45G Product type: Milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: R10 Material class: P / M / S UID: P26379-R10-WSP45G-WALTER Facts Suitable for: Stahl Suitable for: rostfreier Stahl Suitable for: superalloys / Titan Coating type: PVD (Tiger·tec Gold) Insert family: P26379-R10 Special features PVD-coated carbide for wear resistance Optimised chip control via R10 geometry Designed for milling applications in varied alloys Stable cutting edge for reduced index changes FAQ What materials can this insert machine reliably? The P26379-R10 WSP45G insert from Walter Tools is specified for machining Stahl, rostfreier Stahl and superalloys, delivering controlled chip formation across these material groups. What is the main advantage of the Tiger·tec Gold coating? The Tiger·tec Gold coating on this Walter Tools grade enhances abrasion and thermal resistance, which contributes to longer tool life and improved edge stability in demanding milling operations. How does the R10 chipbreaker affect performance? The R10 chipbreaker provides consistent chip segmentation and evacuation, improving surface finish and reducing the likelihood of built-up edge during milling. Is the insert suitable for high-temperature alloys and titanium? Yes, the grade is designed for the S group and is capable of handling heat-resistant superalloys and Titan, offering robustness where heat resistance is essential. Which insert family and designation should be specified when ordering? Order using the full designation P26379-R10 WSP45G (SKU P26379-R10-WSP45G-WALTER) to ensure the correct Tiger·tec Gold grade and R10 chipbreaker geometry are supplied. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26379-R14 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability, optimised chip control and broad material suitability to keep machining productive and predictable. Order the genuine Walter Tools insert directly via Metav Werkzeuge or consult our technical advisers for application-specific selection. Fräswendeschneidplatte P26379-R14 WKP35G (milling indexable insert) – Tiger·tec Gold for steel and cast iron | Walter Tools A Fräswendeschneidplatte P26379-R14 WKP35G designed for robust milling performance in steel and cast iron applications, combining coated carbide grade and a dedicated chipbreaker geometry Tiger·tec Gold coating for extended tool life Optimised for steel and cast iron machining R14 chipbreaker for reliable chip control Compatible with P26379-R14 tool geometries Consistent productivity through advanced grade and coating The WKP35G grade, part of the Tiger·tec Gold family, is a coated carbide solution created to balance wear resistance and thermal stability under continuous milling conditions. Its formulation is optimised for the characteristic heat and chip behaviour of steel and cast iron, which reduces flank wear and edge chipping in high-volume runs. For production environments that demand repeatable component quality, this cutting grade provides measurable gains in tool life and process stability while keeping changeover and regrind cycles predictable. Controlled chips and dependable geometry for smooth machining Equipped with the R14 chipbreaker, this indexable insert promotes stable chip formation and evacuation during face and peripheral milling. The geometry minimises chip entanglement and supports consistent surface finishes, so operators can expect fewer interruptions due to stuck or tangled chips. In practice, this means shorter non-cutting time and fewer manual interventions, improving overall throughput. The insert’s compatibility with the P26379-R14 geometry ensures straightforward integration into existing toolholders and cutting systems. Application-focused benefits and process guidance Designed specifically for the P / K material groups, the insert addresses the abrasive nature of cast components and the thermal loads typical of steel machining. The coating contributes to a lower friction contact and enhanced oxidation resistance at elevated cutting temperatures, which translates into reduced edge breakdown and longer intervals between replacements. For machining strategies that prioritise surface integrity and dimensional consistency, this insert supports both roughing and finishing passes when used with optimised feeds and speeds. Choose Walter Tools Tiger·tec Gold inserts via Metav Werkzeuge for reliable milling performance; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for expert advice and order assistance Technical Data SKU: P26379-R14-WKP35G-WALTER Designation: P26379-R14 WKP35G Product type: Fräswendeschneidplatte Series: Tiger-tec Gold Core Specifications Chipbreaker: R14 Grade/sort: WKP35G Material group: P / K Suitable for: Steel, Cast iron Features & Applications Coating technology: Tiger·tec Gold Application: Milling insert for steel and cast iron Geometry compatibility: P26379-R14 Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P26379-R14 WKP35G insert is intended for steel (P) and cast iron (K) applications and is engineered to handle the typical chip and wear behaviour of these material groups. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold coating on this insert improves thermal resistance and reduces friction at the cutting edge, which enhances tool life and stability during prolonged milling operations. Which chipbreaker does the insert use and why is it important? This insert features the R14 chipbreaker, which provides controlled chip formation and reliable evacuation, reducing interruptions and supporting consistent surface finishes. Is the insert compatible with existing toolholders? The insert matches the P26379-R14 geometry and is compatible with toolholders designed for that designation; confirmation of holder compatibility is recommended before assembly. Can this insert be used for both roughing and finishing operations? Yes. When combined with suitable feeds, speeds and tool path strategies, the insert’s grade and geometry support both robust roughing cuts and stable finishing passes. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
P26379-R14 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP35S grade and the R14 chipbreaker to achieve longer tool life and predictable chip control in steel and cast iron machining; order directly via Metav Werkzeuge or contact the consultants for tailored advice. P26379-R14 WKP35S milling insert — Tiger‑tec Silver coating, for steel and cast iron (Walter Tools) A P26379-R14 WKP35S is a precision milling indexable insert engineered for productive machining of steel and cast iron, combining a wear-resistant coating with a geometry optimised for stable chip formation. Tiger‑tec Silver coating extends tool life WKP35S grade for steel and cast iron R14 chipbreaker for stable chip control Precision indexable insert by Walter Tools Durable coating that reduces wear and operating costs The Tiger‑tec Silver coating, applied to a coated carbide substrate, provides enhanced wear resistance and thermal stability compared with uncoated grades. This results in longer tool life and fewer insert changes during production, which reduces downtime and tool inventory handling. For procurement and process planning, the higher durability translates into improved cost per cutting edge and steadier production throughput when machining demanding steels. Geometry designed for reliable chip control and surface quality The R14 chipbreaker geometry is developed to produce short, controllable chips in typical milling operations, lowering the risk of chip entanglement and workpiece damage. Predictable chip evacuation contributes directly to process stability and a consistent surface finish. In practice, a stable chip form reduces the frequency of operator intervention and supports higher uninterrupted cycle times, which is particularly advantageous for automated or lights-out machining setups. Broad applicability and process security across ISO groups P and K Specified for the ISO groups P (steel) and K (cast iron), this insert is suitable for a wide range of components where abrasive wear and varying chip forms are encountered. The WKP35S grade balances toughness and hardness to handle the heat and forces typical of steel machining while remaining resilient against the abrasive nature of cast iron. The result is consistent tool performance, fewer scrapped parts and reproducible results across batches. Contact Metav Werkzeuge for expert advice on Walter Tools inserts with Tiger‑tec Silver coating — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P26379-R14-WKP35S-WALTER Article: P26379-R14 WKP35S Product type: milling insert Manufacturer: Walter Tools Facts Grade: WKP35S Coating series: Tiger‑tec Silver Chipbreaker: R14 Applicable material groups: P (steel), K (cast iron) Special features Coated carbide substrate Optimised chipformer geometry for stable chips Designed for productive milling of steel and cast iron Brand: Walter Tools FAQ What materials is this insert suitable for? This insert is designed for machining steel and cast iron in accordance with ISO P and K material groups; the WKP35S grade and Tiger‑tec Silver coating ensure wear resistance and process stability. How does the R14 chipbreaker help in production? The R14 chipbreaker produces short, controllable chips and supports consistent chip evacuation, which reduces interruptions and protects the workpiece during milling operations. Is the insert supplied with a coating? Yes, the insert is supplied with the Tiger‑tec Silver coating on a coated carbide substrate to enhance wear resistance and thermal stability. Where can technical advice and availability be obtained? For technical questions and availability of Walter Tools inserts, Metav Werkzeuge provides consultancy and order support via email or telephone. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between Metav Werkzeuge and the named brands. The offered item is an original, factory‑new product of the manufacturer.
P26379-R14 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide durability and the R14 chipbreaker to achieve stable chip control and high productivity in steel milling; order the insert directly via Metav Werkzeuge or contact our consultants for process matching. P26379-R14 WPP35G Walter Tools — Milling indexable insert, Tiger‑tec Gold, R14 chipbreaker The P26379-R14 WPP35G is a coated carbide milling insert optimised for productive steel machining in demanding CNC operations. Tiger‑tec Gold coating for increased wear resistance WPP35G grade for balanced toughness and wear life R14 chipbreaker ensures stable chip formation Designed for ISO P steel machining Maximise cycle-time efficiency in steel cutting operations The Tiger‑tec Gold coating combined with the WPP35G grade delivers a marked improvement in wear resistance and edge stability during continuous milling of steels. By using a coated carbide substrate tuned for steel applications, the insert reduces flank wear and maintains cutting edge integrity over longer tool lives. This leads to fewer tool changes and more uninterrupted production time, which translates into measurable efficiency gains on high-volume jobs. The geometry with the R14 chipbreaker promotes predictable chip shapes and evacuation, supporting higher feed rates without sacrificing process security. Predictable chip control and surface quality The engineered chipbreaker geometry provides stable chip control that minimises the risk of built-up edge and tool damage in a wide range of steel grades. Stable chips improve coolant access and reduce heat concentration at the cutting edge, creating a more consistent thermal environment and therefore a consistent surface finish on machined components. For operators transitioning from general-purpose inserts, the optimized chipflow of this grade helps to reduce interruptions caused by problematic swarf and supports safer, faster machining cycles. Application guidance for reliable integration into existing processes The insert is specified for ISO P (steel) applications and suits a broad repertoire of unalloyed and alloyed steels where a balance of toughness and wear resistance is required. When integrating this insert into a machining cell, match the insert grade and chipbreaker to workpiece material and coolant strategy to exploit the high productivity potential. The right combination of spindle speed, feed per tooth and axial depth will allow the coated carbide grade to demonstrate its strength: longer edge life and fewer unplanned stops. For customers using diverse steel grades, the versatile nature of this grade reduces the need for multiple specialist inserts. For process recommendations and to ensure the P26379-R14 WPP35G is the optimal choice for a specific application, contact Metav Werkzeuge for expert advice and tailored technical support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: P26379-R14-WPP35G-WALTER Designation: P26379-R14 ISO designation: P26379-R14 WPP35G Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Series: Tiger‑tec Gold Grade: WPP35G Chipbreaker: R14 Data Applicable material class: P (steel) Geometry: R14 chipbreaker Coating technology: Tiger‑tec Gold Substrate: coated carbide Use case: milling/indexable insert Special features Coated carbide for increased wear resistance Balanced grade for toughness and durability Stable chip formation for reliable swarf control Suited for unalloyed and alloyed steels (ISO P) FAQ What steels is this insert suitable for? The P26379-R14 WPP35G insert is optimised for ISO P steels, covering both unalloyed and alloyed steel grades where balanced toughness and wear resistance are required. How does the R14 chipbreaker affect machining? The R14 chipbreaker promotes consistent chip formation and evacuation, improving coolant access and contributing to a stable cutting process and better surface finishes when milling steel. Is the coating suitable for high-speed milling? The Tiger‑tec Gold coating on the WPP35G grade enhances wear resistance and edge stability, supporting higher machining speeds within recommended parameters for steel machining. Can this insert reduce tool-change frequency? Yes; the combined effect of the coated substrate and the WPP35G grade is longer edge life, which typically leads to fewer tool changes and improved uptime in production workflows. Does the insert require a specific coolant strategy? While the insert performs across common coolant approaches, optimising coolant flow to the cutting zone improves chip evacuation and enhances the benefits of the R14 chipbreaker and the Tiger‑tec Gold coating. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, brand-new product from Walter Tools.
P26379-R14 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Gold PVD coating and the WSP45G grade for stable cutting edges and consistent chip control in milling operations; order the insert directly via Metav Werkzeuge or consult our team for application support. P26379-R14 WSP45G milling insert – Tiger·tec Gold, for steel, stainless steel and superalloys | Walter Tools The P26379-R14 WSP45G is a milling indexable insert engineered for versatile face and slot milling in a wide range of industrial alloys, offering robust edge stability and dependable chip formation. Tiger·tec Gold PVD coating for high durability Designed for steel, stainless steel and superalloys R14 chipbreaker for secure chip control Coated cemented carbide for stable cutting edge Consistent chip control for uninterrupted production The R14 chipbreaker is designed to shape chips reliably during milling, reducing clogging and enabling predictable evacuation. By creating shorter, controllable chips, the insert minimises interruptions at the tool–workpiece interface and lowers the risk of built-up edge. This reliability translates into fewer tool changes and improved productivity in continuous operations, especially where consistent cycle times are essential. Heat resistance and wear protection from Tiger·tec Gold The Tiger·tec Gold PVD system delivers an enhanced thermal barrier and wear resistance compared with uncoated grades. The coating maintains a cooler cutting zone and protects the substrate against abrasion and adhesive wear, which improves tool life and maintains surface quality over longer runs. For workshops seeking stable machining windows, the combination of coating and substrate ensures repeatable performance under elevated temperatures. Broad material capability for flexible use Rated for ISO groups P, M and S, this grade handles unalloyed and alloyed steel, stainless steel and heat-resistant superalloys including titanium-based materials. The composition and coating of the insert support secure chip formation in ductile steels as well as edge stability when machining tougher, heat-retaining alloys. For mixed-production environments, the versatility of the grade reduces the need for multiple specialised inserts and simplifies tooling decisions. Reliable edge integrity that pays off operationally Manufactured as a coated cemented carbide insert and optimised for milling, the design promotes a stable cutting edge and consistent surface finish. Stable edges reduce the incidence of rework due to poor finish or dimensional drift and support predictable tool-life planning. Process reliability therefore improves, which can result in reduced downtime and a clearer overview of manufacturing costs and throughput. For demanding milling applications choose the Walter Tools Tiger·tec Gold WSP45G grade — contact Metav Werkzeuge for material-specific advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: P26379-R14-WSP45G-WALTER Product type: Milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G ISO designation: P26379-R14 WSP45G Facts Chipbreaker: R14 Material groups: P / M / S UID: P26379-R14-WSP45G-WALTER Special features Coating: Tiger·tec Gold (PVD) Substrate: Coated cemented carbide Suitable for: Steel, stainless steel, superalloys Application: Milling FAQ Which materials can this insert machine effectively? The P26379-R14 WSP45G insert from Walter Tools is suitable for steel, stainless steel and heat-resistant superalloys (ISO groups P, M and S) and is intended for a variety of milling tasks. What is the benefit of the Tiger·tec Gold coating? The Tiger·tec Gold PVD coating on the WSP45G grade increases wear resistance and thermal stability, helping to preserve the cutting edge and extend tool life under demanding milling conditions. How does the R14 chipbreaker affect milling results? The R14 chipbreaker promotes controlled chip formation and reliable evacuation, which reduces the likelihood of clogging and supports consistent surface finish and cycle times. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and forms part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners; brand names are used here for explanatory purposes only and do not imply any commercial relationship.
P26379-R25 WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the R25 chipbreaker for consistent chip control and extended tool life; the result is higher productivity when machining steel and cast iron. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific parameters. P26379-R25 WKP35G — indexable milling insert with Tiger·tec Gold for steel and cast iron, Walter Tools The P26379-R25 WKP35G is an indexable milling insert engineered for robust performance in general steel and cast iron machining applications, combining a high-performance coated grade with a geometry optimised for reliable chip formation. Tiger·tec Gold coating for extended tool life Optimised R25 chipbreaker for reliable chips Suited for machining steel and cast iron Walter Tools quality and stable cutting edge Greater lifetime and wear resistance with Tiger·tec Gold The coated carbide grade delivers a clear benefit in routine production: Tiger·tec Gold provides advanced thermal stability and enhanced wear resistance, which reduces flank and crater wear in continuous cutting. This means fewer insert changes and less downtime, increasing overall productivity. The composition and coating structure are tuned for the typical heat and abrasion encountered in steel and cast iron turning and milling, giving a measurable extension of service life compared with uncoated grades. Only essential maintenance steps are required, so set-up time remains short and process reliability improves. Reliable chip control for safer, cleaner machining The insert’s R25 chipbreaker is designed to manage chip formation in both short and continuous cutting regimes. Controlled chip splitting and curling reduce the risk of snarling or ropey chips, improving surface integrity and facilitating automated chip evacuation. Good chip control translates into safer unattended runs and fewer interventions, which supports stable cycle times and consistent part quality. For production environments where repeatability matters, the controlled chips also help maintain tool edge condition and preserve the target surface quality. Application range and economical productivity in ISO groups P and K This grade is specified for ISO P (steel) and K (cast iron) workpiece groups and is set up to cope with the differing demands of each: heat and plastic deformation in steels, and abrasive, segmented chips in cast iron. The combination of grade and geometry delivers a balance between cost-effectiveness and machining performance: lower tooling consumption per part and predictable tool-change intervals. For process planners, the insert supports a broad spectrum of common steels and cast irons, simplifying tool selection and reducing inventory complexity. Practical integration and compatibility with existing toolholders As an indexable milling insert, the P26379-R25 WKP35G fits standard cutters designed for the specified insert geometry and clamping form; this enables quick replacements and consistent seat positioning. The insert’s stable cutting edge and proven coating technology from Walter Tools support reliable performance in serial production and single-piece flow alike. When matched with appropriate cutting data and coolant strategy, the insert helps achieve reproducible results and low scrap rates, making it a practical choice for workshops seeking dependable throughput. For technical recommendations tailored to the machining task and availability details for the Walter Tools Tiger·tec Gold grade, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation and supply options Technical data Article number: P26379-R25-WKP35G-WALTER Designation: P26379-R25 ISO designation: P26379-R25 WKP35G Grade: WKP35G Series: Tiger-tec Gold Chipbreaker: R25 Material group: P / K Product type: Indexable milling insert Manufacturer: Walter Tools Core data No dimensional data provided No cutting parameter default values provided No weight or packing details provided Special features Coating: Tiger·tec Gold Substrate: coated carbide Optimised for steel (ISO P) Optimised for cast iron (ISO K) Stable cutting edge for productive machining FAQ What workpiece materials are suitable for this insert? The P26379-R25 WKP35G insert is suitable for ISO P (steel) and ISO K (cast iron) machining, providing balanced performance for both material groups. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold reduces thermal and abrasive wear on the coated carbide grade, which extends service life and maintains cutting-edge stability during prolonged milling operations. What is the purpose of the R25 chipbreaker? The R25 chipbreaker is engineered to control chip shape and evacuation, improving surface finish and reducing the risk of chip-related interruptions in automated or manual milling. Is the insert compatible with standard toolholders? This indexable milling insert is intended for cutters designed to accept the specified insert designation and geometry; correct seating and clamping ensure repeatable positioning and performance. Can this insert be used for high-speed machining? The WKP35G grade and Tiger·tec Gold coating are optimised for robust performance; cutting speeds should be selected according to toolholder stability and machining strategy rather than a blanket high-speed setting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, brand-new goods from the manufacturer.
P26379-R25 WKP35S Wendeplatten - Walter Tools Technische Daten: - coating: Tiger-tec Silver (beschichtetes Hartmetall) - material: P / K - stahl_material_anwendung: ja - cast_iron_material_anwendung: ja
Take advantage of the Tiger·tec Silver coating and the WKP35S carbide grade for consistent productivity and extended tool life; the R25 chipbreaker ensures reliable chip control when machining steel and cast iron. Order directly via Metav Werkzeuge or consult our technical team for application advice and rapid supply. P26379-R25 WKP35S milling insert for steel and cast iron — Walter Tools The P26379-R25 WKP35S is a coated carbide milling insert from the Tiger·tec Silver series, engineered for productive machining of steel (P) and cast iron (K) applications. Tiger·tec Silver coating for extended tool life WKP35S grade for robust cutting performance R25 chipbreaker for reliable chip control Designed for steel and cast iron machining Greater productivity through a hard-wearing grade and coating The combination of the WKP35S coated carbide grade and the Tiger·tec Silver technology delivers stable cutting performance under continuous operation. This pairing reduces flank and crater wear, which translates into longer intervals between indexings and fewer tool changes. For production environments that prioritise throughput, the hardened coating helps to maintain cutting edge integrity at elevated cutting temperatures, resulting in lower scrap rates and more predictable cycle times. Continuous machining with controlled chips and process security The integrated R25 chipbreaker is designed to shape and break chips consistently during milling, improving evacuation and reducing the risk of entanglement or machine stoppages. Predictable chip control lessens the need for manual intervention and protects both workpiece and tool, supporting uninterrupted shifts. In practical terms, fewer interruptions mean higher machine availability and a smoother production flow for series machining. Broad material coverage tailored to common workshop needs This cutting grade is optimised for ISO groups P and K, making it suitable for a wide range of steels and cast irons encountered in workshop and industrial milling. The insert’s substrate and coating combination copes with the typical heat generation and abrasive interaction characteristic of these materials, offering a balance between toughness and wear resistance that supports consistent surface finish and dimensional stability. Practical benefits for operational efficiency and quality As an indexable insert, it allows rapid edge renewal by simple indexing rather than regrinding, supporting lean inventory and faster maintenance routines. The robust cut control and coating performance contribute to repeatable results, which simplifies process documentation and reduces variability between batches. For manufacturing environments focused on efficiency and reproducible part quality, this insert supports sustained productivity and predictable tool life. For tailored recommendations on the Tiger·tec Silver grade and to secure P26379-R25 WKP35S inserts, contact Metav Werkzeuge via email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt technical support and availability. Technical Data Article number: P26379-R25-WKP35S-WALTER Designation: P26379-R25 WKP35S Type: Fräswendeschneidplatte Brand: Walter Tools Core data Grade: WKP35S Series: Tiger·tec Silver Chipbreaker: R25 Material groups: P (steel), K (cast iron) Special features Coated carbide cutting grade Optimised for stable chip formation Suited to machining steel and cast iron Aimed at productive milling applications FAQ What materials is this insert suitable for? The P26379-R25 WKP35S insert is designed for ISO material groups P and K, meaning it is suitable for machining a range of steel and cast iron components. How does the Tiger·tec Silver coating improve performance? The Tiger·tec Silver coating increases wear resistance and thermal stability, which helps the insert retain cutting-edge integrity and extend service life under demanding milling conditions. What role does the R25 chipbreaker play? The R25 chipbreaker shapes and breaks chips reliably during milling, improving chip evacuation, reducing the risk of entanglement, and supporting uninterrupted production cycles. Is this insert a good choice for series production? Yes; the WKP35S grade and coating combination provides process stability and repeatable results, making the insert well suited to series and high-volume milling. Can the insert help reduce machine downtime? By offering consistent chip control and extended edge life, the insert contributes to fewer interruptions and less frequent indexings, which supports higher machine availability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metal machining and is part of the Swedish Sandvik group. Trademarked names and product designations are the property of their respective owners and are cited for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
P26379-R25 WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP35G grade for reliable steel machining with controlled chips; order the P26379-R25 WPP35G directly via Metav Werkzeuge or consult their specialists for application support and delivery options. P26379-R25 WPP35G Fräswendeschneidplatte (milling indexable insert) — Tiger‑tec Gold, R25 chipbreaker, Walter Tools The P26379-R25 WPP35G is a milling indexable insert engineered for high-productivity steel machining, combining a robust coated carbide substrate with an efficient R25 chipbreaker for stable cutting performance. Tiger‑tec Gold coating for extended tool life WPP35G grade for balanced wear and toughness R25 chipbreaker for predictable chip control Optimised for steel machining Longer tool life through advanced coating technology The Tiger‑tec Gold system delivers a multi-layer coating that reduces abrasion and thermal load during cutting, which results in noticeably improved wear resistance and longer tool life compared with uncoated grades. The WPP35G composition is a coated carbide developed to balance toughness with hardness, making it suitable for conventional and moderately demanding steel applications. For production environments this means fewer index changes and improved process economy, as the protective layers reduce flank wear and resist built-up edge formation under typical cutting temperatures. Predictable chips and safer, more efficient milling The integrated R25 chipbreaker is designed to shape and break chips reliably when machining steels, reducing entanglement and easing evacuation from the cut. Controlled chip control minimises the risk of tool damage and shortens set-up times for downstream handling. In practical terms, the insert’s geometry promotes a steady cutting force and a regular chip flow, which enhances surface finish and leads to improved productivity on milling operations with a range of feeds and speeds. The chipbreaker also simplifies coolant and chip management in automated lines. Process security and versatile performance in series production Manufactured by Walter Tools, this insert is part of the Tiger‑tec Gold family and is aimed at customers who require consistent performance and repeatable results. The WPP35G grade is positioned as a universal-to-ductile option, delivering a compromise between wear resistance and toughness that suits many steel grades. Its stable cutting behaviour supports predictable tool life and reduces variation between batches. For manufacturers seeking to standardise inserts across similar machining tasks, this option supports consistent cycle times and part quality while maintaining economical tool consumption. For reliable, high-volume steel milling using the Tiger‑tec Gold series, request an application sheet or a tailored quote from Metav Werkzeuge and discuss process parameters with their technical team. Technical data Article number: P26379-R25-WPP35G-WALTER SKU: P26379-R25-WPP35G-WALTER Designation: P26379-R25 WPP35G Series: Tiger‑tec Gold Core specifications Grade: WPP35G Chipbreaker: R25 Material group: P (steel) Product type: milling indexable insert Design and special features Coated carbide substrate Balanced wear resistance and toughness Optimised for steel machining per ISO P group Manufacturer: Walter Tools FAQ What materials is this insert intended for? The P26379-R25 WPP35G insert is optimised for machining steel (ISO P group) and is formulated to handle the heat and chip formation typical of such materials. How does the Tiger‑tec Gold coating benefit production? Tiger‑tec Gold on this Walter Tools insert increases wear resistance and thermal stability, which extends tool life and supports consistent machining results in series production. What role does the R25 chipbreaker play? The R25 chipbreaker on this insert provides controlled chip formation and evacuation, reducing entanglement and improving safety and surface finish during milling. Is this insert suitable for high-feed milling operations? The WPP35G grade is balanced to offer toughness and wear resistance; it is suitable for a range of feeds and speeds commonly used in steel milling, supporting productive and stable cutting. How should tool change intervals be planned with this insert? Tool change intervals depend on cutting conditions; the coated carbide and Tiger‑tec Gold technology of the P26379-R25 WPP35G typically extend intervals compared with uncoated grades, improving overall process economy. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26379-R25 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating and the R25 chipbreaker for reliable chip control across steel, stainless steel and heat‑resistant alloys; the insert delivers extended tool life and process stability. Order directly via Metav Werkzeuge or request specific pairing advice from the consultants. P26379-R25 WSP45G milling indexable insert, Tiger·tec Gold PVD, R25 – Walter Tools The P26379-R25 WSP45G is a PVD‑coated tungsten carbide milling insert engineered for versatile milling of steel, stainless steel and heat‑resistant alloys in demanding production environments. Tiger·tec Gold PVD coating for wear resistance Suited for steel, stainless steel and superalloys R25 chipbreaker for stable chip formation Consistent tool life through modern coating technology The combination of a PVD coating and a robust carbide substrate provides predictable wear behaviour and improved tool life, especially under the thermal and mechanical loads typical of milling. The Tiger·tec Gold technology is designed to reduce flank wear and maintain a steady cutting edge, which translates into fewer tool changes and less unplanned downtime. For shops focusing on productivity, the coated grade delivers consistent surface finish and repeatable component tolerances even during extended production runs. Stable chip control that improves surface quality The R25 chipbreaker geometry ensures reliable chip formation across a range of feeds and depths of cut. Stable chips reduce the risk of built‑up edge and improve evacuation in pocketing and slotting operations, which benefits both cycle time and component quality. The insert’s suitability for the ISO groups P / M / S means it handles unalloyed and alloyed steels, rust‑resistant materials and heat‑resistant superalloys with controlled chip flow. Clear chip control helps prolong the life of holders and minimises interruptions for chip clearing. Practical application guidance for efficient machining For milling applications that demand versatility, the insert performs well in roughing and semi‑finishing passes where thermal stability and edge robustness are required. Select appropriate feeds and speeds according to workpiece material and machine rigidity; higher temperatures in stainless steel and superalloys favour the thermal stability of the Tiger·tec Gold grade. The ergonomic benefits include fewer tool changes and predictable tool‑change intervals, which support a smoother production flow and easier process planning for manufacturing engineers. Reliability and brand performance for production environments Walter Tools’ grade design and coating process are engineered for high process reliability and stable cutting edges, offering repeatable results in serial production. Choosing a recognised grade and series supports better process documentation and easier tool allocation across similar machining tasks. The insert’s design aims at productivity and consistent quality, making it a fitting choice where reproducibility and tool life are priorities. Contact Metav Werkzeuge to specify the optimal Walter Tools Tiger·tec Gold insert for the machining task or to request a tailored technical recommendation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical overview SKU: P26379-R25-WSP45G-WALTER Designation: P26379-R25 WSP45G Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: R25 Material groups: P / M / S Manufacturer: Walter Tools Product type: milling indexable insert UID: P26379-R25-WSP45G-WALTER Measured data Applicable materials: steel, stainless steel, heat‑resistant alloys Coating type: PVD (Tiger·tec Gold) Substrate: coated cemented carbide Special features Coated carbide with Tiger·tec Gold technology Versatile P / M / S application range Robust chip control via R25 chipbreaker Designed for milling operations requiring thermal stability Suitable for roughing and semi‑finishing strategies FAQ What materials can this insert machine effectively? The P26379-R25 WSP45G insert is designed for machining steel, stainless steel and heat‑resistant superalloys (ISO groups P / M / S), offering stable cutting behaviour across these categories. What does the Tiger·tec Gold coating provide? The Tiger·tec Gold PVD coating on the insert improves wear resistance and thermal stability, which contributes to longer tool life and more consistent surface finish during milling. How does the R25 chipbreaker influence machining? The R25 chipbreaker promotes controlled chip formation and reliable evacuation, reducing the risk of built‑up edge and improving process stability in pocketing and slotting operations. Is this insert suitable for roughing and finishing passes? Yes, the insert is suitable for both roughing and semi‑finishing where a robust cutting edge and thermal resistance are required; final finishing should be planned according to surface tolerance requirements. Which brand manufactures this grade and series? The insert is a Walter Tools product from the Tiger·tec Gold series, intended for productive milling applications with a focus on repeatable results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are stated for explanatory purposes only. The item offered is original, factory‑new goods of the manufacturer.
P265676-UN1.1/2 UN1.1/2 Nicht zutreffend Wendeplatten - Walter Tools
Take advantage of the UN1.1/2 chipbreaker and the clear ISO designation for dependable chip control and consistent thread form; this results in stable production and reduced rework. Order the threading insert directly via Metav Werkzeuge or consult our advisors for integration into existing tool systems. P265676-UN1.1/2 Walter Tools — Threading insert with UN1.1/2 chipbreaker The P265676-UN1.1/2 is a threading insert designed for precision thread cutting in industrial turning operations, equipped with the UN1.1/2 chipbreaker to improve chip control and process stability. Threading insert P265676-UN1.1/2 Chipbreaker UN1.1/2 for controlled chips Suitable for industrial thread turning Consistent chip control for reliable thread quality The UN1.1/2 chipbreaker provides controlled chip formation, which supports uninterrupted turning cycles and reduces the likelihood of tool stoppages. By shaping chips into short, manageable fragments the insert helps to protect the cutting edge and the workpiece from damage; this leads to fewer interruptions on the shopfloor and improved process security. The clear ISO designation and part number also make replacement and inventory management straightforward. Designed for integration in industrial turning workflows As an indexable threading solution, this insert is suited to series production where repeatability matters. The geometry of the insert supports predictable cutting behaviour and simplifies setup, lowering the effort required for clamping and alignment. For machine shops aiming to maintain steady cycle times, the combination of defined geometry and a dedicated chip control feature assists in achieving consistent throughput and reduced downstream inspection. Precise thread form and repeatable results The defined chipbreaker and manufacturer designation contribute to reliable contour replication and threading accuracy, which is essential in assemblies that demand tight fitting threads. The ISO marking ensures that the insert can be identified unambiguously in technical documentation and spare-part lists, supporting traceability and process documentation. For applications that require repeatable quality, this insert helps to shorten set-up verification and stabilise serial production. Discuss the Walter Tools threading insert with Metav Werkzeuge today — call +49 2822 7131930 or email info@metav-werkzeuge.com to specify the optimum insert for the application Technical Data SKU: P265676-UN1.1/2--WALTER Article number / designation: P265676-UN1.1/2 Product type: Threading insert Manufacturer: Walter Tools Facts Chipbreaker: UN1.1/2 ISO designation: P265676-UN1.1/2 Series: Not applicable Special features Series note: For this grade no clear catalogue description is available Indexable insert format (wendeplatte) Clear part identification for logistics and replacement FAQ What is the purpose of the UN1.1/2 chipbreaker? The UN1.1/2 chipbreaker in the P265676-UN1.1/2 threading insert promotes controlled chip formation to reduce chip-related interruptions and to protect the cutting edge during turning operations. How is the insert typically used in production? The Walter Tools threading insert is designed for use in lathe-based thread cutting and in toolholder systems that accept indexable inserts; it supports stable, repeatable threading cycles in industrial workflows. Is the P265676-UN1.1/2 indexable or solid? This product is an indexable threading insert (wendeplatte) intended for interchangeability and straightforward replacement when wear occurs. What does the designation P265676-UN1.1/2 indicate? The designation combines the manufacturer part number (P265676) with the chipbreaker/feature notation (UN1.1/2), providing an unambiguous identifier for ordering and documentation. Where can further technical details about series and grades be found? The available data lists the series as not applicable and notes that no precise catalogue description was supplied; for exhaustive technical parameters, refer to the manufacturer documentation. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only; there is no connection between our company and the mentioned brands. The offered item is an original, factory-new product of Walter Tools.
P265676-UN1.1/4 UN1.1/4 Nicht zutreffend Wendeplatten - Walter Tools
Achieve consistent thread quality with a durable cutting edge and optimised chip control; benefit from improved process reliability and reduced rework. Order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. P265676-UN1.1/4 Threading insert with UN1.1/4 chipbreaker, Walter Tools The P265676-UN1.1/4 is a threading insert engineered for industrial thread cutting, offering controlled chip formation via its UN1.1/4 chipbreaker for stable turning operations. UN1.1/4 chipbreaker for controlled chips Indexable insert for standard threading holders Designed for consistent thread form Manufactured by Walter Tools Reliable chip control for steady production The UN1.1/4 chipbreaker provides consistent chip control, reducing the risk of built-up edge and minimising interruptions during turning cycles. This characteristic translates into fewer scrap parts and lower downstream rework, which supports a more predictable production rhythm. By focusing on controlled chip evacuation, the insert helps maintain surface finish quality and repeatable thread geometry in serial machining. Practical compatibility and simple integration Designed as an indexable insert for threading applications, the component integrates into holders that accept ISO-designated threading inserts. The geometry of the chipbreaker optimises chip flow for thread turning, which supports steady tool life under typical industrial conditions. For users assessing toolholder fits or thread form requirements, technical advisors can clarify compatibility based on the ISO designation and the application context. Consistent performance backed by recognised tooling expertise As a product from Walter Tools, this insert benefits from the manufacturer's emphasis on precision and robust cutting edges. The combination of a defined chipbreaker and stable insert geometry supports process reliability, encouraging repeatable results in production environments. For operations where thread accuracy and throughput are priorities, the insert represents a pragmatic choice to bolster productivity without extensive process modification. Contact Metav Werkzeuge for application advice or to request genuine Walter Tools threading inserts; info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: P265676-UN1.1/4--WALTER Label: Gewindeschneidplatte P265676-UN1.1/4 Walter Tools Manufacturer: Walter Tools Product type: Threading insert Facts No numerical specifications provided in the source data Special features Chipbreaker: UN1.1/4 ISO designation: P265676-UN1.1/4 Series: Nicht zutreffend Notes: Sorten- und Serienbeschreibung: Für diese Sorte liegt in den bereitgestellten Katalogen keine eindeutige Detailbeschreibung vor FAQ What is the primary purpose of the UN1.1/4 chipbreaker? The UN1.1/4 chipbreaker on this threading insert promotes controlled chip formation during thread turning, helping to maintain consistent thread profile and reduce interruptions in machining. Can the insert be used in standard threading holders? Yes, the P265676-UN1.1/4 is an indexable threading insert intended for holders that accept ISO-designated inserts with matching geometry. How does the insert affect surface finish and rework rates? By improving chip evacuation and reducing unstable cutting conditions, the insert supports a better surface finish and typically lowers the need for rework or additional finishing passes. Is this an original Walter Tools product and how is it referenced? The item is referenced as Walter Tools threading insert P265676-UN1.1/4; use SKU P265676-UN1.1/4--WALTER for ordering and specification checks. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and brand names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; no connection between Metav Werkzeuge and the mentioned brands is implied. The offered article is an original, factory-new product of the named manufacturer (Walter Tools).
P265676-UN1.1/8 UN1.1/8 Nicht zutreffend Wendeplatten - Walter Tools
Take advantage of the proven combination of precise UN 1 1/8 thread form accuracy, industrial-grade repeatability and the manufacturing quality associated with Walter Tools; order originals directly via Metav Werkzeuge or consult the technical team for application matching. Thread cutting insert P265676-UN1.1/8 by Walter Tools — UN 1 1/8 thread form, precision geometry The P265676-UN1.1/8 is a thread cutting insert designed for producing compact, repeatable UN 1 1/8 threads in industrial turning operations Thread form UN 1 1/8 compatibility Precision-ground cutting geometry Robust construction for repeatable results Suitable for high-productivity turning Consistent UN thread profile for reliable component assembly The primary advantage of a specialist thread cutting insert with the UN 1 1/8 designation is the capacity to produce a consistent, standardised thread profile that meets common assembly requirements. Where thread form accuracy is essential, an insert that is engineered for the Unified National (UN) profile ensures mating parts achieve predictable torque behaviour and sealing performance. The construction and geometry of the insert are tailored to the specific flank angles and pitch of this thread family, which reduces the need for post-process correction and supports efficient quality control in serial production. This results in fewer non-conforming parts and a more stable production flow. Designed to improve productivity and repeatability in turning cells Indexable thread inserts such as this are intended to support fast cycle times and straightforward edge changes. The precision-ground cutting geometry provides clean chip formation and helps maintain a consistent cutting engagement, which directly contributes to reduced cycle variation and longer intervals between tool changes. For manufacturing environments where throughput and reproducibility are priorities, the use of a dedicated insert offers measurable gains in operational efficiency, shorter set-up times and improved process stability over untailored solutions. Integration into tooling systems with attention to process security Although holders and clamping details are selected to match the machine and program, the insert’s ISO designation and clear thread-form labelling simplify selection and traceability within a tooling portfolio. The association with Walter Tools signals a focus on machining reliability and a stable cutting edge, attributes that assist process engineers when harmonising tool libraries across multiple lathes. Careful matching of holder geometry and cutting parameters to the insert’s profile preserves thread quality and extends the useful life of both insert and holder, supporting consistent production cycles. Operational benefits: inspection, maintenance and lifecycle considerations Operationally, the use of a purpose-made thread insert reduces inspection overhead: repeatable threads cut to the correct profile mean fewer manual checks and fewer adjustments. The insert’s indexing capability permits rapid renewal of the cutting edge without full tool replacement, improving uptime. When planning tool management, document the ISO designation and SKU to ensure identical replacements are used; this preserves process windows and reduces variability. For products destined for assembly, enhanced surface integrity and correct flank geometry reduce rework and assembly delays. Contact Metav Werkzeuge for matching holders, availability of original Walter Tools thread cutting inserts and tailored machining advice; technical advisors are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P265676-UN1.1/8--WALTER Label: Gewindeschneidplatte P265676-UN1.1/8 Walter Tools Manufacturer: Walter Tools Facts Thread size: 1 1/8 in (UN) Special features Product type: Thread cutting insert ISO designation: P265676-UN1.1/8 Thread form: UN1.1/8 Series: Not applicable FAQ What thread form does this insert produce? The insert produces the UN 1 1/8 thread form as indicated by the ISO designation and the span-breaker marking. Is this an original Walter Tools product and how is it identified? This is an original Walter Tools thread cutting insert; identification is via the SKU P265676-UN1.1/8--WALTER and the ISO designation P265676-UN1.1/8. Can the insert be used in high-volume manufacturing? The insert is intended for production environments where repeatability and stable thread form are required; pairing the insert with appropriate holders supports high-volume turning. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new goods of the manufacturer.
P265676-UN1.3/4 UN1.3/4 Nicht zutreffend Wendeplatten - Walter Tools
Take advantage of the original Walter Tools design combined with a dedicated UN1.3/4 chipbreaker for stable thread formation and consistent chip control; order the P265676-UN1.3/4 threading insert directly via Metav Werkzeuge or consult the sales team for application advice. P265676-UN1.3/4 threading insert (UN1.3/4 chipbreaker) by Walter Tools P265676-UN1.3/4 is a threading insert intended for industrial thread-cutting operations, offering a defined chipbreaker geometry for controlled chip evacuation in UN thread forms. Precisely matched UN1.3/4 chipbreaker Original Walter Tools product Designed for industrial thread cutting Consistent chip control for productivity Process stability through defined thread geometry The first priority in thread production is repeatability. The threading insert delivers a consistent thread outline thanks to its fixed geometry and the integrated UN1.3/4 chipbreaker, which supports regular chip formation and evacuation. For process planners and production engineers, this translates into fewer interrupted cycles, reduced rework and a more reliable machining sequence. The insert’s construction from a recognised tooling brand underpins predictable performance in series production. Productivity benefits from controlled chip formation Efficient chip control reduces cycle times and the risk of tool crashes. The chipbreaker included with this insert is configured for UN thread profiles and promotes short, manageable chips during turning or threading operations. The result is improved machine uptime and a lower incidence of manual intervention at the workpiece. Where high batch consistency is required, the stable chip behaviour contributes directly to throughput and operational efficiency. Procurement and integration guidance for shop floors Specification and replacement are straightforward: the designation identifies the insert unambiguously and supports stock-keeping and tool-change planning. Original Walter Tools parts ensure compatibility with established clamping systems and replacement cycles. For customers requiring further technical clarification—such as recommended cutting parameters or holder compatibility—product documentation should be requested from the distributor to confirm integration within the specific manufacturing setup. Secure original Walter Tools threading inserts through Metav Werkzeuge for dependable thread production and straightforward procurement; Metav Werkzeuge can provide application guidance and ordering support. Technical data SKU: P265676-UN1.3/4--WALTER Designation: P265676-UN1.3/4 Product type: Threading insert Manufacturer: Walter Tools Core specifications No dimensional or performance data provided in the source Special features Chipbreaker: UN1.3/4 ISO designation: P265676-UN1.3/4 Series: Not applicable Note: No further series or grade description available in the supplied catalogues FAQ What thread form is this insert designed for? The insert is configured for the UN thread form; its chipbreaker is specified as UN1.3/4 to match that profile. Is this an original brand component? Yes, the P265676-UN1.3/4 is listed as an original Walter Tools threading insert. How is chip control described for this insert? The integrated UN1.3/4 chipbreaker promotes consistent chip formation and evacuation suitable for industrial thread-cutting processes. Where can detailed cutting data be found? No cutting parameters are included in the provided data; consult the product documentation or catalogue for recommended speeds and feeds. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. The offered item is original factory-new material from the manufacturer. There is no affiliation between our company and the mentioned brands.
P265676-UN1.3/8 UN1.3/8 Nicht zutreffend Wendeplatten - Walter Tools
Take advantage of a robust threading solution that combines precise UN 1.3/8 thread form, reliable cutting performance and consistent indexability for smooth production runs. Benefit from Walter Tools' engineering pedigree and request further advice or place an order directly via Metav Werkzeuge for fast technical support. P265676-UN1.3/8 Threading insert (UN 1.3/8) by Walter Tools P265676-UN1.3/8 is a specialised threading insert engineered for producing UN 1.3/8 profiles in industrial turning applications, optimised for repeatable performance and stable chip formation Precision UN 1.3/8 thread form Stable chip formation for consistent cycles Engineered for industrial turning operations Walter Tools standard for repeatability Consistent thread geometry for dependable production The insert delivers a defined thread profile adapted to the UN 1.3/8 standard, which reduces rework and ensures interchangeability of parts across batches. By using a tooling solution that maintains a consistent cutting edge and profile, shops gain process reliability and reduced inspection effort. The design focuses on achieving the nominal form on each pass, making dimensional control and subsequent assembly operations more predictable. Stable chip control to increase uptime Stable chip formation is a key factor for continuous machining. The geometry promotes coherent chip flow, which reduces cycle interruptions and tool interference. Improved chip behaviour contributes directly to cutting performance and machine uptime, lowering the risk of tool breakage or part damage. For manufacturing environments where long runs are common, this characteristic supports fewer stoppages and steadier output. Indexability and handling for efficient tool management As a replaceable insert, the component simplifies tool change procedures and inventory handling. The flexibility of indexable tool systems allows quick restoration of cutting conditions by rotating or replacing the insert rather than rehoning complete holders. This approach shortens maintenance intervals and supports predictable production planning while preserving cutting edge consistency across serial production. Technical compatibility and application scope The component is intended for use in standard threading operations where UN 1.3/8 profiles are required. Its construction supports conventional turning centres and CNC lathes; when paired with an appropriate toolholder it delivers repeatable results even under demanding cycle conditions. For shops transitioning production or adapting existing setups, the insert provides a pragmatic balance of performance and operational simplicity. Discuss application suitability and ordering with Metav Werkzeuge; technical consultants are available by email or phone to advise on integration into existing tooling systems Technical data Article number: P265676-UN1.3/8--WALTER Designation: P265676-UN1.3/8 Product type: Threading insert Brand: Walter Tools Facts Thread form: UN 1.3/8 Series: Not applicable Special features Story trigger: inserts Sort/series note: For this grade no clear description available in the provided catalogues FAQ What thread form does this insert produce? The insert produces a UN 1.3/8 thread form; the P265676-UN1.3/8 threading insert by Walter Tools is specified for that standard. Is the insert indexable and suitable for long runs? Yes, the design of the P265676-UN1.3/8 threading insert supports indexable use, improving tool life management and suitability for serial production. Which machines is this insert compatible with? The insert is compatible with standard turning centres and CNC lathes when used with a matching toolholder and clamping system. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer. Walter Tools is referenced where applicable.
P265676-UN1.5/8- Walter Tools
Take advantage of the precise UN1.5/8 thread form, seamless compatibility with the Walter Tools system and consistent cutting performance for dependable thread production; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. P265676-UN1.5/8 – Threading insert UN1.5/8 by Walter Tools The P265676-UN1.5/8 is a threading insert designed for metalworking thread production, primarily for turning and CNC machining operations. Precision UN1.5/8 thread form Compatible with Walter Tools systems Suitable for standard turning operations Improve thread quality with reliable geometry The insert delivers consistent thread form and repeatable profiles thanks to its defined cutting edge geometry. For workshop and production environments where repeatability matters, a stable insert geometry reduces rework and inspection time. The term UN1.5/8 denotes the thread form integrated into the insert’s chipbreaking and cutting geometry; this ensures that the insert produces the intended profile without the need for extensive operator adjustment. As a result, overall process reliability and part conformity improve. Streamline setup and machining cycles Thanks to its standard designation and compatibility with established insert systems, the component reduces changeover complexity and helps maintain machining rhythm. Integration into existing toolholders is straightforward when using matched Walter Tools clamping systems, which supports shorter setup routines and steady cycle times. The predictable behaviour of the insert under stable cutting conditions contributes to higher productivity and fewer unplanned interruptions on CNC lathes and turning centres. Selection guidance and application fit While catalogue detail for the series is limited, the designation and chipbreaker marking provide clear orientation for selecting the correct insert for a given thread task. The insert is intended for typical thread-cutting applications in metalworking; pairing the insert with appropriate feed and spindle speed settings yields the best balance between surface finish and tool life. For users seeking advice on holder compatibility or recommended cutting parameters, specialist consultation is advised to translate the insert’s designation into optimal machining settings. For tailored threading solutions using Walter Tools inserts, contact Metav Werkzeuge for availability and technical consultation: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number / SKU: P265676-UN1.5/8--WALTER Product type: Threading insert Brand: Walter Tools Designation: P265676-UN1.5/8 Facts No numerical data available in source Special features Thread form / chipbreaker: UN1.5/8 Series: Not applicable Notes: No further catalogue description available FAQ What thread form does this insert produce? The P265676-UN1.5/8 threading insert produces a UN1.5/8 thread form as indicated by its designation; the marking defines the insert’s chipbreaker and cutting geometry for that profile. Is this insert compatible with standard Walter Tools holders? Yes, the insert is designed for use within the Walter Tools ecosystem and is compatible with holders and clamping systems intended for threading inserts of this designation. For which machining tasks is the insert suited? This threading insert is suited for general thread-cutting tasks in metalworking on lathes and CNC turning machines where the UN1.5/8 form is required. Where can additional cutting data or holder recommendations be obtained? Cutting data and holder recommendations for the P265676-UN1.5/8 insert are available on request; technical consultation can help translate the designation into feed and speed settings for specific materials. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
P265676-UN1.7/8 P265676-UN1.7/8 UN1.7/8 Wendeplatten - Walter Tools
Take advantage of the combination of precise chip control, consistent cutting performance and industrial-grade reliability for dependable threading cycles in production. Order originals through Metav Werkzeuge or consult our specialists for application-specific recommendations. P265676-UN1.7/8 threading insert — UN1.7/8 chipbreaker, Walter Tools A P265676-UN1.7/8 threading insert engineered for industrial thread cutting applications, featuring the UN1.7/8 chipbreaker for controlled chip formation and stable machining. Precision UN1.7/8 chipbreaker Threading insert P265676-UN1.7/8 Manufactured by Walter Tools Robust geometry for consistent chips Predictable chip control for reliable threading The combination of a defined chipbreaker geometry and stable insert seating ensures repeatable chip shapes during thread cutting. This results in fewer interruptions for chip removal and a steadier cutting force, which contributes to improved process stability on lathes and turning centres. The design focuses on delivering consistent chips that reduce the risk of rework and extend productive cutting windows, supporting continuous operation in batch and series production. Precision and surface quality through optimised geometry A well-engineered threading insert minimises tool chatter and promotes a uniform thread profile. The specific groove and edge preparation found in this insert support precise thread form reproduction and can help achieve the required surface finish with fewer passes. For workshops aiming to reduce cycle times, the predictable cutting behaviour means less trial-and-error when setting feeds and speeds, and a higher first-time-right rate for standard thread geometries. Practical handling and integration into production The insert is suitable for systematic tool management: clear designation and consistent performance simplify tool selection and inventory control. When paired with the correct toolholder and clamping system, the insert maintains its cutting geometry across multiple operations, supporting repeatable results. Recommendations for toolholders and clamping should be based on the machine and thread specification to ensure optimal seating and cutting conditions. For tailored application advice or to procure Walter Tools threading inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: P265676-UN1.7/8--WALTER Item designation: P265676-UN1.7/8 Product type: Gewindeschneidplatte (threading insert) Manufacturer: Walter Tools SKU: P265676-UN1.7/8--WALTER Facts Series: Nicht zutreffend Chipbreaker: UN1.7/8 ISO designation: P265676-UN1.7/8 UID: P265676-UN1.7/8--WALTER Special features UN1.7/8 chipbreaker geometry Industrial-grade insert for thread cutting Clear designation for tool management Documented Walter Tools provenance FAQ What chip control does this insert offer? The insert provides a defined UN1.7/8 chipbreaker shape, engineered to form consistent chips and reduce interruptions during thread cutting with the Walter Tools threading insert P265676-UN1.7/8. Is this insert suitable for series production? Yes, the insert’s robust geometry and predictable cutting behaviour make it appropriate for series and batch production where repeatability and reduced downtime are priorities. How should the insert be identified in stock management? Reference the designation P265676-UN1.7/8 and the Walter Tools brand; the clear labelling supports rapid identification and replacement in tool assemblies. Can this insert achieve a consistent thread profile? When used with a suitable toolholder and correctly set cutting parameters, the insert is designed to reproduce thread forms consistently and support good surface quality. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P265676-UN2 UN2 Gewindeschneidplatte - Walter Tools
Benefit from the combination of Walter Tools' manufacturing standards and the UN2 chipbreaker for dependable chip control and consistent thread quality; suitable for productive turning operations. Order the insert directly via Metav Werkzeuge or contact our consultants for specification guidance. P265676-UN2 UN2 threading insert – Walter Tools A precision threading insert designed with a UN2 chipbreaker for controlled chip flow in thread-turning applications. UN2 chipbreaker for controlled chip formation Optimised for thread turning operations Walter Tools precision and repeatability Suitable for productive machining cycles Predictable chip control for consistent thread surfaces The integrated UN2 chipbreaker ensures predictable chip formation during thread turning, which reduces the risk of chip packing and improves surface consistency. Controlled chip evacuation shortens cycle interruptions and lowers the likelihood of secondary finishing, delivering a measurable increase in process efficiency. For shops seeking reliable thread quality across batch production, the chip geometry promotes stable cutting conditions and helps maintain tolerances over longer tool life spans. Increased productivity through process stability A cutting solution with optimised chip control contributes directly to process stability. Stable cutting conditions reduce tool changes and machine downtime, resulting in higher throughput for repetitive threading tasks. The design emphasises consistent material removal rates and repeatability, so setups remain stable across shifts. Where repeatable results are critical, this insert supports predictable tool life and fewer process variances, translating into lower unit costs and improved production planning. Practical handling and application guidance for workshop use Designed for ease of integration into existing toolholders, the insert supports straightforward changeovers and predictable seating in standard threading toolholders. Clear ISO designation and consistent geometry simplify tool selection and inventory management. For users less familiar with chipbreaker terminology: the chipbreaker is a small groove or form on the cutting edge that shapes and breaks chips into manageable pieces, preventing long, stringy swarf and protecting both the workpiece and the machine. This tangible benefit reduces manual intervention and improves overall shop safety. For specialised advice on integrating the Walter Tools UN2 threading insert into current machining processes, contact Metav Werkzeuge for tailored technical guidance and availability. Technical Data SKU: P265676-UN2--WALTER Label: Gewindeschneidplatte P265676-UN2 Walter Tools Product type: Threading insert Brand: Walter Tools ISO designation: P265676-UN2 Facts Chipbreaker: UN2 Series: Not applicable SKU/UID: P265676-UN2--WALTER Special features Designed for thread turning applications Optimised chip control geometry Suitable for productive machining cycles No specific material or coating data provided FAQ What materials is this threading insert suited for? The P265676-UN2 UN2 threading insert is specified for general thread-turning applications; no specific material suitability is listed in the available data, so tool selection should follow the workshop’s standard recommendations for the intended workpiece material. How does the UN2 chipbreaker improve machining? The UN2 chipbreaker shapes and fragments chips during cutting, which improves evacuation, reduces the risk of chip re-cutting, and contributes to more consistent thread quality with fewer interruptions. Can the insert be used in standard threading holders? The insert is described as a threading insert with an ISO designation; it is intended for use in compatible threading toolholders that accept the stated ISO geometry. Is there a detailed coating or grade specification available? No coating or grade data is provided in the supplied information. For exact grade or coating details, consult Metav Werkzeuge before ordering. How should tool life expectations be managed when using this insert? Tool life depends on application parameters, workpiece material and machining conditions. The UN2 chip control contributes to process stability, which typically supports longer effective tool life under steady operating conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are used solely for explanatory purposes. There is no connection between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer.
P2840S-1N-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP25S grade and the optimised 1N‑A57 chipformer for consistent, productive machining of steel and cast iron; order directly via Metav Werkzeuge or consult the technical team for cutting data and toolholder compatibility. P2840S-1N-A57 WKP25S drilling/boring indexable insert, Tiger·tec Silver coating — Walter Tools P2840S-1N-A57 WKP25S is a coated indexable insert designed for drilling and boring operations in steel and cast iron, delivering stable cutting performance in demanding production environments Tiger·tec Silver coating for extended tool life Optimised chipformer 1N‑A57 for reliable chips Application: steel and cast iron (ISO groups P, K) Walter Tools grade WKP25S with stable cutting edge High productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP25S carbide grade delivers a measurable increase in tool life and process stability during medium to high cutting loads. The coating technology reduces adhesive and abrasive wear, while the grade balances toughness and hardness to resist chipping on interrupted cuts. For production planners this means fewer index changes and more uptime, with consistent surface quality on both steel and cast iron workpieces. Reliable chip control for safer machining The insert’s 1N‑A57 chipformer is engineered to produce short, controllable chips in typical P and K materials, reducing the risk of entanglement and machine downtime. Improved chip control also supports stable coolant flow and more predictable tool forces, which helps maintain bore accuracy and repeatability during serial operations. The result is both improved cycle times and lower scrap rates in routine drilling and boring tasks. Compatibility and process guidance for shop floors This indexable insert is intended for use in standard drilling and boring toolholders compatible with the P2840S geometry. Its design supports reliable seating and clamping, ensuring a consistent cutting edge position that assists in maintaining dimensional tolerances. When paired with appropriate feeds and speeds for the material group, the insert enables efficient machining strategies for small to medium batch sizes, with benefits in both setup frequency and overall throughput. Practical benefits for operators and process engineers Beyond the raw cutting performance, the insert’s balanced carbide formulation and coating reduce the need for frequent inspections and regrinds, contributing to predictable tool budgets and less process variation. The product suits workshops aiming to standardise tooling across steel and cast iron applications, offering a straightforward route to improved productivity without complex parameter modifications. Contact Metav Werkzeuge today for tailored cutting data, toolholder checks and immediate availability via Metav Werkzeuge GmbH Technical data Article number: P2840S-1N-A57-WKP25S-WALTER SKU: P2840S-1N-A57-WKP25S-WALTER Product type: Drilling/boring indexable insert Grade: WKP25S Chipformer: 1N‑A57 Series: Tiger·tec Silver Facts Suitable for steel (P): yes Suitable for cast iron (K): yes Coated carbide: yes Manufacturer: Walter Tools UID: P2840S-1N-A57-WKP25S-WALTER Special features Tiger·tec Silver coating Optimised chipformer for short chips Coated hardmetal grade WKP25S Designed for drilling and boring operations Recommended for ISO groups P and K FAQ What materials is this insert intended for? The P2840S-1N-A57 WKP25S insert is specified for machining steel and cast iron (ISO groups P and K), utilising the Tiger·tec Silver coating and WKP25S grade for those materials. How does the 1N‑A57 chipformer affect machining? The 1N‑A57 chipformer on this Walter Tools insert produces short, consistent chips suitable for drilling and boring, improving chip evacuation and reducing re-cutting risk. Is the insert suitable for interrupted cuts or harder steels? WKP25S provides a balance of toughness and wear resistance; while optimised for general P and K applications, tool life in interrupted or higher-alloy steels should be validated with adjusted cutting parameters. Can the insert be re-sharpened or reground? This coated carbide insert is designed as an indexable cutting element; typical practice is indexing or replacement rather than regrinding to retain coating benefits. Which series does the insert belong to and what does that imply? Belonging to the Tiger·tec Silver series means the insert benefits from advanced coating technology aimed at reducing adhesive and abrasive wear for more consistent performance in production. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods from Walter Tools.
P2840S-1N-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Silver coating, the WKP35S grade and the 1N‑A57 chipbreaker to secure long tool life, consistent chip control and high productivity in drilling and bore‑enlargement tasks; order genuine inserts through Metav Werkzeuge or consult the technical advisors for application support. P2840S-1N-A57 WKP35S drilling/boring indexable insert — Tiger‑tec Silver, for steel and cast iron — Walter Tools The P2840S-1N-A57 WKP35S is a coated carbide indexable insert engineered for drilling and bore‑enlargement applications, offering enhanced wear resistance and controlled chip formation in steel and cast iron machining. Tiger‑tec Silver coating for enhanced wear resistance WKP35S grade optimised for steel and cast iron machining 1N‑A57 chipbreaker for controlled chip formation Consistent edge stability for productive drilling operations Extended tool life through advanced coating technology The combination of the Tiger‑tec Silver coating and a coated carbide substrate provides measurable benefits in terms of wear resistance and thermal stability. Coating technology reduces flank and crater wear during interrupted cuts and high temperatures common in steel machining, which translates directly into longer insert life and fewer tool changes. For production environments seeking predictable tool consumption, this performance characteristic supports higher machine utilisation and lower process costs without compromising component quality. Reliable chip control and improved process security The integrated 1N‑A57 chipbreaker is designed to produce short, consistent chips when machining ISO group P (steel) and K (cast iron). Controlled chip formation reduces the risk of chip entanglement, aids coolant flow around the cutting zone and improves surface integrity of the bore. As part of the WKP35S grade, the geometry and coating work together to maintain a stable cutting edge, resulting in consistent hole quality and repeatable cycle times — a clear advantage in batch and serial production. Designed for productive drilling and bore‑enlargement cycles The indexable design facilitates quick insert replacement and repeatable positioning, which supports uninterrupted production. The grade’s balance between toughness and hardness enables it to withstand the heat and mechanical stress typical of drilling operations in steel and cast iron, while the coating mitigates abrasive wear. The net effect is improved process reliability: fewer unplanned interruptions, better surface finish of the bore, and a more favourable total cost of ownership through reduced consumable turnover. Practical selection and application guidance The designation P2840S‑1N‑A57 WKP35S identifies the insert geometry, chipbreaker and material grade; matching the insert to the correct drill or boring head is essential for optimal results. When choosing an insert, consider the workpiece material, cutting parameters and machine rigidity — the WKP35S grade is tailored for operations where a balance of wear resistance and edge stability is required. For specialised alloys or atypical cutting conditions, consult technical documentation or Metav Werkzeuge’s advisors to align geometry and parameters with the intended machining task. Contact Metav Werkzeuge for tailored application advice and to secure original Walter Tools P2840S-1N-A57 WKP35S inserts; technical advisors are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: P2840S-1N-A57-WKP35S-WALTER SKU: P2840S-1N-A57-WKP35S-WALTER Product designation: P2840S-1N-A57 WKP35S Product type: drilling/boring indexable insert Brand: Walter Tools Facts Applicable material groups: P / K Grade series: Tiger‑tec Silver Chipbreaker: 1N‑A57 Special features Coating: Tiger‑tec Silver Material: coated carbide Suitable for: steel machining Suitable for: cast iron machining Series: Tiger‑tec Silver Grade: WKP35S FAQ What materials is this insert suitable for? The P2840S-1N-A57 WKP35S is optimised for ISO group P (steel) and K (cast iron), reflecting the grade’s focus on typical heat and chip behaviour in these materials. What does the WKP35S grade offer compared with standard grades? WKP35S, part of the Tiger‑tec Silver family, delivers a combination of enhanced wear resistance and edge stability that improves life and consistency under typical drilling and boring conditions. How does the 1N‑A57 chipbreaker affect performance? The 1N‑A57 chipbreaker produces short, controllable chips in P and K materials, which aids coolant access, reduces chip management issues and contributes to stable surface quality. Is this an original Walter Tools product? Yes, the insert is an original factory‑new product of Walter Tools and supplied under the manufacturer’s specifications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer. The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group.
P2840S-1N-A57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of durable PVD coating and a specialised chipbreaker to maintain stable production and reduced tool changes; order the insert through Metav Werkzeuge or consult our team for application advice. P2840S-1N-A57 WSP45G drilling/reaming indexable insert — Tiger‑tec Gold, Walter Tools The P2840S-1N-A57 WSP45G is a coated indexable insert designed for high-demand drilling and reaming tasks, combining a wear-resistant Tiger‑tec Gold grade with a chipbreaker tailored for secure chip control in a wide range of materials. Tiger‑tec Gold PVD for extended life Versatile for Stahl and rostfreier Stahl 1N‑A57 chipbreaker for reliable chips Coated carbide WSP45G for milling toughness Prolonged tool life through advanced coating technology The Tiger‑tec Gold series offers a high-performance PVD-coated carbide grade that is engineered to resist thermal and abrasive wear in interrupted and continuous cutting. The WSP45G grade balances toughness and hardness to delay flank and crater wear, which translates directly into longer intervals between indexings and fewer tool changes. For production environments where component quality and uptime are critical, this coating technology reduces the total cost of machining by maintaining cutting-edge integrity under elevated temperatures and varied cutting conditions. Stable chip formation and secure edge performance The integrated 1N‑A57 chipbreaker is developed to provide consistent chip segmentation and evacuation during drilling and reaming operations. Stable chip control minimises the risk of built-up edge and reduces re-cutting of material, improving surface finish and dimensional stability. An insert with this chipbreaker supports predictable force patterns in the toolholder, which contributes to repeatable hole quality and lowers the chance of tool- or workpiece-related interruptions on the shop floor. Broad applicability across demanding workpiece groups This cutting grade is qualified for the ISO groups P / M / S, which correspond to common engineering steels, rostfreier Stahl and high-temperature alloys including titanium and nickel-based superalloys. The combination of a tough substrate and a wear-resistant coating enables safe machining where chips are hard to break and heat generation is significant. For manufacturers working across component families, a single grade that reliably covers Stahl, rostfreier Stahl and superalloys reduces tool inventory complexity and simplifies process planning. Practical benefits for workshop integration and productivity As a drilling/reaming indexable insert, the product is compatible with standard toolholder systems and is intended to shorten set-up and maintenance time. The P2840S-1N-A57 WSP45G insert supports stable cutting conditions in milling-related environments and can be used where progressive wear resistance and reproducible edge life are required. By choosing a grade optimised for toughness and coated for heat resistance, shops achieve a balance of economy and performance that keeps cycle times consistent and helps maintain surface quality across serial production runs. Discuss specific application suitability and current availability for Walter Tools Tiger‑tec Gold inserts with Metav Werkzeuge via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: P2840S-1N-A57-WSP45G-WALTER Designation: P2840S-1N-A57 WSP45G Product type: Drilling/reaming indexable insert Brand: Walter Tools SKU: P2840S-1N-A57-WSP45G-WALTER Key specifications Material groups: P / M / S Chipbreaker: 1N‑A57 Grade: WSP45G Series: Tiger‑tec Gold Special features Coated carbide grade with PVD technology Suitable for Stahl, rostfreier Stahl and superalloys/titanium Optimised for secure chip formation and edge stability Designed for reproducible performance in milling-related applications FAQ Which workpiece materials are suitable for this insert? The P2840S-1N-A57 WSP45G insert from Walter Tools is specified for ISO groups P / M / S, meaning it is suitable for machining Stahl, rostfreier Stahl and heat‑resistant superalloys including titanium. How does the Tiger‑tec Gold coating affect tool life? The Tiger‑tec Gold coating on the WSP45G grade increases thermal and abrasive resistance, which extends flank and crater wear life and helps maintain consistent cutting performance under elevated temperatures. What benefit does the 1N‑A57 chipbreaker provide? The 1N‑A57 chipbreaker promotes controlled chip segmentation and evacuation during drilling and reaming, improving surface finish and reducing the likelihood of built-up edge and toolholder disturbances. Can this insert be used for both drilling and reaming operations? Yes, the insert is designed as a drilling/reaming indexable insert and is compatible with appropriate toolholder geometries for these operations, offering a balance of toughness and wear resistance for through‑hole processing. Is this a factory-new original tool from the manufacturer? The P2840S-1N-A57 WSP45G is offered as an original factory-new insert by Walter Tools and is supplied in the manufacturer’s specified grade and series. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is among the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is original factory-new goods of the manufacturer.
P2840S-1N-E67 WK40 Wendeplatten - Walter Tools
Benefit from the combination of cost-effective uncoated carbide, precise 1N‑E67 chip control, and the proven stability of the Walter open-grade series for reliable machining results; order directly via Metav Werkzeuge or consult the team for application guidance. P2840S-1N-E67 WK40 Bohr-/Aufbohrwendeschneidplatte, uncoated carbide, 1N‑E67 chipbreaker — Walter Tools The P2840S-1N-E67 WK40 is an indexable drilling and bore-enlarging insert intended for productive metalcutting tasks where an economical, uncoated carbide grade and controlled chip formation are required. Uncoated carbide for broad workpiece range 1N‑E67 chipbreaker for stable chip control Economical Walter grade WK40 for daily use Compatible with standard drilling toolholders Predictable chip formation for smoother production The combination of the 1N‑E67 chipbreaker and the WK40 uncoated carbide class delivers stable chip behaviour, which reduces interruptions and enables a steadier production flow. The chip geometry is designed to break and evacuate reliably under typical drilling and boring conditions, aiding process stability. As a result, cycle times become more consistent and the likelihood of tool-related rejects is reduced, supporting predictable shop-floor performance. Robust material properties and grade guidance The insert is manufactured from an uncoated cemented carbide grade from the Walter open series, offering a balance between wear resistance and economy. Uncoated carbide provides direct substrate toughness without surface coatings, which can be advantageous for certain cutting conditions and tool regrinding. Material suitability should be determined against the specific product matrix for the WK40 grade to ensure optimal selection for the intended workpiece materials. Practical integration and operational advantages As an indexable insert designed for drilling and bore enlargement, the P2840S geometry allows simple replacement and inventory handling, reducing downtime for tool changes. The insert integrates with standard drilling-holder systems and supports consistent repeatability across assemblies. Choosing a Walter open-grade insert like this one assists in stock rationalisation and cost control while maintaining reliable cutting performance for everyday workshop requirements. For tailored advice on applying Walter Tools WK40 inserts and availability, contact Metav Werkzeuge for expert guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: P2840S-1N-E67-WK40-WALTER Article designation: P2840S-1N-E67 WK40 Product type: Indexable drilling / bore-enlarging insert Manufacturer: Walter Tools Grade series: Walter Schneidstoffsorte - Serie offen Grade: WK40 Chipbreaker: 1N‑E67 Facts Coating: uncoated Material: cemented carbide (catalogue dependent) Series designation: open series Walter Schneidstoffsorte SKU label: Bohr-/Aufbohrwendeschneidplatte P2840S-1N-E67 WK40 Walter Tools Special features Designed for stable chip formation Economical grade for daily machining Suitable for standard drilling toolholders Sorteneinsatz: check product matrix for material suitability FAQ What cutting tasks is this insert designed for? The P2840S-1N-E67 WK40 insert is intended for drilling and bore-enlarging operations where an uncoated, economical carbide grade and controlled chip breaking are required. Is the WK40 grade coated or uncoated? WK40 is supplied as an uncoated cemented carbide grade in the Walter open series, offering toughness without surface coatings. How does the 1N‑E67 chipbreaker benefit machining? The 1N‑E67 chipbreaker on the Walter insert promotes stable chip control, which reduces interruptions and improves process reliability during drilling and boring. Can this insert be reground or recycled? As an uncoated cemented carbide insert, the P2840S geometry typically allows for reconditioning depending on wear; consult the product matrix or Metav Werkzeuge for regrinding recommendations. Where to check if the insert suits a specific workpiece material? Material applicability for the WK40 grade should be verified in the product matrix; Metav Werkzeuge can assist with selection based on the intended workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com