P26335R25 WSM35G WSM35G Wendeplatten - Walter Tools
The Tiger·tec Gold coating and the WSM35G grade deliver high thermal and edge stability for reliable performance on stainless steels and heat‑resistant alloys; combined with the proven insert geometry this reduces tool changes and increases uptime — order directly via Metav Werkzeuge or consult our team for application support. P26335R25 WSM35G — milling indexable insert, Tiger·tec Gold coated, Walter Tools The P26335R25 WSM35G is a coated indexable insert engineered for productive machining of stainless steels and heat‑resistant superalloys, offering enhanced wear resistance and consistently stable cutting edges. Tiger·tec Gold coated carbide grade WSM35G Optimised for stainless and superalloys Stable cutting edge and reliable chip control High wear resistance for productive machining Higher throughput on demanding materials The Tiger·tec Gold coating combined with the WSM35G grade provides superior thermal resistance and improved edge life when machining materials that generate heat and strain the cutting edge. This insert is a coated cemented carbide solution aimed at keeping cutting forces predictable and reducing unscheduled tool changes. By promoting controlled chip formation and resisting accelerated flank wear, the result is a measurable improvement in process efficiency and reduced downtime. Benefits include fewer interruptions for tool replacement and a more consistent cycle time across batches. Predictable surface quality and process security When a process requires repeatable surface finish and tight tolerances, edge stability is decisive. The insert’s coating and grade are developed to counter built‑up edge and crater wear, which stabilises the cutting action in stainless steels (ISO group M) and in heat‑resistant superalloys and titanium (ISO group S). Depending on the chosen insert geometry, the combination of grade and coating supports reliable chip control and helps maintain component quality over longer tool life. In practical terms this translates to fewer rework cycles and a steadier output quality for critical parts. Practical integration and economical operation Selecting a toolgrade that matches material demands minimises process variability and lowers overall machining cost. The Tiger·tec Gold series is aimed at providing robustness for hard‑to‑machine alloys while keeping stock removal rates productive. Adopting this insert can reduce the frequency of tool change‑overs and simplify tooling setups, contributing to a leaner production flow. For shops evaluating cycle time and cost‑per‑part, the predictable wear behaviour of this grade supports confident machining parameter planning and easier process validation. Contact Metav Werkzeuge for tailored cutting data, application recommendations and availability for Walter Tools inserts such as the P26335R25 WSM35G — Metav Werkzeuge provides direct advice and fast technical response. Technical data SKU: P26335R25-WSM35G-WALTER Label: Fräswendeschneidplatte P26335R25 WSM35G Walter Tools Product type: milling indexable insert Series: Tiger·tec Gold Grade: WSM35G Data Material groups: S / M ISO designation: P26335R25 WSM35G UID: P26335R25-WSM35G-WALTER Special features Coated cemented carbide Suited for stainless steels (ISO group M) Suited for heat‑resistant superalloys and titanium (ISO group S) Designed for stable cutting edge and reliable chip control FAQ What materials is this insert suitable for? The P26335R25 WSM35G insert is formulated for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), offering thermal stability and wear resistance for these demanding materials. How does the Tiger·tec Gold coating help in production? The Tiger·tec Gold coating on the WSM35G grade increases heat resistance and reduces edge breakdown, which supports longer tool life and more consistent component quality in high‑temperature applications. Can the same insert be used for stainless steel and superalloys? Yes — the WSM35G grade is optimised for both ISO groups M and S; geometry selection and cutting parameters should be adapted to the specific alloy and machining strategy. Is this insert compatible with standard milling toolholders? The P26335R25 WSM35G is an indexable insert designed for conventional milling toolholders that accept the P26335R25 ISO designation; check the holder specification for seat and clamping compatibility. What performance improvements can be expected versus standard grades? Using the WSM35G grade with Tiger·tec Gold technology typically yields improved edge life and process stability on difficult‑to‑machine alloys, which reduces tool change frequency and supports higher net productivity. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (trading as Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names remain the property of their respective owners; brand names are used here solely for clarification.
P26335R25 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a robust carbide grade to extend tool life and secure stable chip formation in demanding milling tasks; order directly via Metav Werkzeuge or contact their consultants for tailored tool selection. P26335R25 WSP45G milling insert — Tiger·tec Gold, coated carbide by Walter Tools P26335R25 WSP45G is a coated carbide milling insert designed for demanding milling applications in Stahl, rostfreier Stahl and heat-resistant alloys Tiger·tec Gold PVD coating for long tool life Versatile for Stahl, rostfreier Stahl and superalloys Coated carbide grade WSP45G for milling stability Stable cutting edge for productive machining High-performance coating for longer production runs The Tiger·tec Gold technology delivers a PVD-coated surface that increases resistance to abrasive and adhesive wear while preserving edge integrity. This results in longer tool life and more predictable change intervals, which directly reduces unplanned downtime. The coating is optimised for the thermal and mechanical stresses typical of milling operations in Stahl, rostfreier Stahl and heat-resistant superalloys, supporting consistent surface finishes and fewer rejects. Predictable chip control and reliable cutting behaviour The grade WSP45G is engineered as a tough, versatile PVD-coated carbide, offering improved support against chipping under intermittent cuts and interrupted milling. The combination of substrate and coating leads to stable chip formation and controlled built-up edge characteristics when machining sticky or heat-sensitive workpiece groups. For shops pursuing repeatable cycle times, this insert helps to maintain throughput by reducing the variability of tool wear and keeping machining parameters more stable. Practical selection and application advice for milling tasks When choosing the insert grade for an application, consider the workpiece group and cutting conditions: the designation indicates suitability for P (Stahl), M (rostfreier Stahl) and S (superalloys/titanium) according to industry standards. The robust cutting edge geometry of this grade supports productive feeds and depths of cut while the coating lowers friction and heat transfer to the cutting edge. For best results, pair the insert with appropriate cutter bodies and follow the supplier’s recommended speeds and feeds to balance material removal rate and tool life. Discuss milling tool selection with Metav Werkzeuge — for detailed recommendations on using the Walter Tools Tiger·tec Gold range and to request machining parameters tailored to specific applications, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: P26335R25-WSP45G-WALTER Article: Fräswendeschneidplatte P26335R25 WSP45G Walter Tools Manufacturer: Walter Tools Facts Series: Tiger-tec Gold Grade: WSP45G Designation: P26335R25 WSP45G Special features Coating: Tiger·tec Gold (PVD-coated carbide) Material designation: P / M / S Suitable for: Stahl, rostfreier Stahl, superalloys and titanium Product type: Fräswendeschneidplatte (milling insert) FAQ What materials can this milling insert machine effectively? The P26335R25 WSP45G insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys/titanium, as specified by its P/M/S designation. What is the main benefit of the Tiger·tec Gold coating on this insert? Tiger·tec Gold provides improved wear resistance and thermal stability for the WSP45G grade, extending tool life and delivering more consistent machining results. Is this insert appropriate for interrupted cuts and heavy milling? Yes, the WSP45G grade combines toughness with a stable cutting edge to resist chipping during interrupted cutting and higher load conditions. How does this insert affect surface finish and process reliability? The coated carbide and optimised edge geometry of this milling insert promote controlled chip formation and reduced built-up edge, contributing to consistent surface finishes and higher process reliability. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation purposes only. There is no affiliation between our company and the mentioned brands. The offered item is original, factory-new merchandise of the manufacturer Walter Tools. Manufacturer: Walter Tools; part of Walter AG, member of the Sandvik Group
P26337R10 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold PVD coating, durable carbide substrate and broad material applicability for reliable, productive milling. Order directly via Metav Werkzeuge or consult our team for tailored recommendations. P26337R10 WSP45G milling insert (PVD-coated carbide, Tiger‑tec Gold) – Walter Tools The P26337R10 WSP45G is a PVD-coated milling insert engineered for versatile face and slot milling in steel, stainless steel and heat‑resistant alloys. Tiger‑tec Gold PVD-coated carbide grade WSP45G Versatile for steel, stainless steel and superalloys Stable cutting edge and improved chip control Designed for productive milling processes Consistent tool life for high-volume milling The Tiger‑tec Gold grade combines a PVD-coated surface with a robust carbide substrate to deliver stable edge behaviour under continuous milling. This composition reduces flank wear and improves resistance to thermal and mechanical loading, which in turn extends tool life and lowers tool change frequency. By favouring a consistent cutting edge, the insert supports predictable process windows and helps maintain component tolerances during longer production cycles. The correlation between coating technology and substrate hardness is the key to achieving repeatable productivity gains. Broad material capability reduces setup changes Engineered for the ISO groups P, M and S, the grade is specified for machining unalloyed and alloyed steel, stainless steel and superalloys. This versatility reduces the need for separate inserts when switching between workpieces, simplifying inventory and setup. The microstructure and coating chemistry support secure chip formation in materials that typically cause adhesion or high cutting temperatures; in practice this means fewer interrupted cuts and more stable surface finishes when moving across different materials within the same production batch. Conformance with ISO material grouping provides a straightforward basis for process selection. Reliable process performance and economical machining As an indexable milling solution, the insert delivers the benefits of repeatable geometry and fast reconditioning: broken or worn corners are replaced quickly without scrapping an entire tool. The grade’s attention to chip control and edge stability helps maintain cycle times and reduces the risk of built‑up edge in tougher alloys. For operations focused on throughput, this translates into measurable improvements in productivity and reduced downtime. Integration into standard milling holders is straightforward, enabling a smooth transition from trial to series production while keeping process parameters comparable and manageable. Contact Metav Werkzeuge for tailored recommendations on toolholder compatibility and batch availability or for advice on optimising cutting conditions with the Tiger‑tec Gold range Technical data SKU: P26337R10-WSP45G-WALTER ISO designation: P26337R10 WSP45G Product type: milling insert Series: Tiger‑tec Gold Grade: WSP45G Applicable material groups: P / M / S Core data Applicable standards reference: ISO material groups P, M, S Material system: PVD-coated carbide Manufacturer SKU: P26337R10-WSP45G-WALTER Special features PVD-coated carbide for enhanced wear resistance Optimised for steel, stainless steel and heat‑resistant alloys Stable cutting edge for improved process security Good chip formation and control Indexable insert suitable for common milling holders FAQ What materials can this insert machine effectively? The P26337R10 WSP45G by Walter Tools is designed for ISO groups P, M and S, meaning it is suitable for machining steel, stainless steel and heat‑resistant alloys. Is the grade suitable for finishing operations? Yes, the Tiger‑tec Gold grade offers a balance of edge stability and wear resistance that supports consistent surface quality in many finishing scenarios. Can the insert withstand high cutting temperatures? The PVD coating and carbide substrate improve thermal resistance; the grade is developed to handle the increased thermal load typical of stainless steels and superalloys. How does the insert support production efficiency? By combining a durable coating with a stable cutting edge, the insert reduces tool changes and supports predictable process windows, which helps maintain cycle times and overall throughput. Is this an indexable solution compatible with standard milling holders? Yes, the design is an indexable milling insert meant for integration into common milling tool systems; verify the exact seat and clamping specifications with Metav Werkzeuge for holder compatibility. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26337R14 WKP35G Wendeplatten - Walter Tools
Reliable productivity and extended tool life result from the combination of Tiger·tec Gold coating and a coated carbide grade optimised for machining steel and cast iron; order the insert directly via Metav Werkzeuge or consult our specialists for application support. P26337R14 WKP35G indexable milling insert — coated carbide, for steel & cast iron — Walter Tools P26337R14 WKP35G is a coated carbide indexable milling insert designed for efficient machining of steel and cast iron in industrial milling applications Tiger·tec Gold coated carbide Optimised for steel and cast iron Stable cutting edge and wear resistance Productive, wide material coverage Consistent performance from advanced coating technology The Tiger·tec Gold technology provides a robust, coated carbide surface that reduces friction and increases resistance to abrasive wear. This results in more consistent tool life under varying cutting conditions and supports higher process stability during series production. The insert is engineered for the typical heat generation and chip behaviour encountered when machining steel and cast iron, which helps maintain a reliable machining cycle and reduces unplanned tool changes. By choosing this insert, shops benefit from predictable tool consumption and lower overall process interruptions. Stable cutting geometry for predictable productivity A stable cutting edge and well-controlled geometry mean fewer surprises at the machine. The insert’s design focuses on maintaining a sharp, durable edge that copes with both continuous and interrupted cuts commonly found in milling operations. The resulting wear resistance and consistent chip control help to sustain machining parameters for longer periods, improving overall productivity. For engineers and production planners, this translates into fewer set-up adjustments, reduced inspection intervals and smoother workflow across batches. Practical guidance for selection and application Classified for application groups P (steel) and K (cast iron) under ISO 513, the insert is suited to a broad range of components where robustness and repeatability are required. When integrating the insert into a process, match cutter geometry and toolholder rigidity to the intended operation to fully exploit the cutting edge stability and coating benefits. If parameter fine-tuning is required for specific alloys or part geometries, technical consultation is available; this helps to ensure optimal tool life and surface finish with the chosen grade. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Gold inserts and fast delivery: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: P26337R14-WKP35G-WALTER Designation: P26337R14 WKP35G Product type: Indexable milling insert (milling insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Facts Material group: P / K Application standard: ISO 513 compatibility SKU: P26337R14-WKP35G-WALTER Special features Coating technology: Tiger·tec Gold (coated carbide) Sort: WKP35G Main applications: Steel, cast iron UID: P26337R14-WKP35G-WALTER FAQ What materials is this insert intended for? The P26337R14 WKP35G insert is intended primarily for machining steel and cast iron, aligned with ISO 513 application groups P and K. How does the Tiger·tec Gold coating benefit production runs? The Tiger·tec Gold coating improves wear resistance and reduces friction, which helps to extend tool life and maintain consistent performance over longer production runs. Is this insert suitable for interrupted cuts? Yes, the insert’s stable cutting geometry and robust coated carbide grade provide reliable performance in both continuous and interrupted milling operations. Can this insert be used across a range of steels and cast irons? The WKP35G grade offers broad material coverage for many common unalloyed and alloyed steels as well as typical cast iron types, supporting versatile workshop use. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools (Walter AG) is a globally recognised manufacturer of precision cutting tools and is part of the broader Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, new product from the manufacturer.
P26337R14 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP35S grade for reliable performance in machining steel and cast iron, ensuring stable chip formation and productive milling results; order or request advice via Metav Werkzeuge for quick technical support. P26337R14 WKP35S indexable milling insert – Tiger·tec Silver, for steel and cast iron (Walter Tools) A P26337R14 WKP35S indexable milling insert designed for productive, process-safe machining of steel (ISO P) and cast iron (ISO K) Tiger·tec Silver coating for longer life Designed for steel (P) and cast iron (K) Coated carbide grade WKP35S Suitable for productive milling operations Built for consistent milling in steel and cast iron The insert combines the Tiger·tec Silver coating with the WKP35S carbide grade to balance wear resistance and toughness for mixed-production environments. The coating reduces flank wear and supports a stable cutting edge, while the substrate maintains toughness under interrupted cuts. Suitable for the ISO material groups P (steel) and K (cast iron), the geometry and grade are optimised for common shop-floor conditions, giving predictable tool life and consistent surface finish even when material batches vary. Maximising process security and productivity Designed to support process security in milling operations, the insert promotes controlled chip control and repeatable cutting behaviour. The combination of coated carbide and a geometry adapted for milling reduces the risk of unexpected edge failure, which in turn lowers downtime and increases productivity. For operations prioritising cycle time and part quality, this insert offers a robust compromise between durability and edge stability, enabling higher feed rates and reliable performance across a range of steels and cast irons. Practical selection and handling guidance for best results As an indexable milling insert, correct seat, clamping and cutter selection are decisive for performance: use the specified seat dimensions and ensure clean, undamaged pockets to preserve the coated cutting edge. For finishing and semi-finishing passes, exploit the coating’s wear resistance with moderate cutting speeds and consistent coolant application where compatible. For roughing, the toughness of the substrate helps absorb intermittent loads. For cutting data or geometry-specific recommendations, consult the supplier data sheets or contact Metav Werkzeuge for tailored parameters. Contact Metav Werkzeuge for cutting data, availability and application advice for Walter Tools inserts: info@metav-werkzeuge.com, +49 2822 7131930 Technical data SKU: P26337R14-WKP35S-WALTER Article designation: P26337R14 WKP35S Product type: indexable milling insert Brand: Walter Tools Series: Tiger·tec Silver Facts No numerical dimensions or speeds provided in the dataset No weight or size specifications available Price information not included here Special features Coating: Tiger·tec Silver (coated carbide) Grade: WKP35S Material suitability: Steel (P) and Cast iron (K) Product family: Fräswendeschneidplatte / indexable milling insert FAQ What materials is this insert suitable for? The P26337R14 WKP35S insert is designed for machining steel (ISO P) and cast iron (ISO K), reflecting the WKP35S grade and Tiger·tec Silver coating. Is this a coated or uncoated insert? This is a coated carbide insert: the Tiger·tec Silver coating enhances wear resistance while the substrate provides toughness. Can this insert be used for roughing and finishing? Yes; the substrate toughness supports roughing under intermittent cuts, and the coating helps maintain edge life during semi-finish and finish applications with appropriate cutting data. Where can one obtain recommended cutting parameters? Cutting data and geometry-specific recommendations for the P26337R14 WKP35S are available from Metav Werkzeuge or the Walter Tools technical documentation. Does the insert require special pocket preparation? For best performance, ensure the tool holder pocket is clean and undamaged; correct clamping is essential to protect the coated cutting edge and achieve the intended tool life. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names mentioned are the property of their respective owners and are used for informational purposes only. No connection exists between our company and the trademark owners. The offered item is an original, factory-new product of the specified manufacturer.
P26337R14 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating, the robust WPP35G coated‑carbide grade and steel suitability for reliable, productive milling — order the insert directly via Metav Werkzeuge or consult our specialists for grade selection and application advice. P26337R14 WPP35G milling insert for steel, Tiger‑tec Gold — Walter Tools P26337R14 WPP35G is a coated carbide milling insert engineered for efficient steel machining in demandÂing production environments Tiger‑tec Gold coating for improved tool life Coated carbide grade WPP35G for steel machining Consistent chip control and stable cutting edge Suitable for productive, high‑precision milling High, consistent performance for steel machining The insert is built on a coated carbide substrate and the Tiger‑tec Gold technology to address the heat and chip formation typical of steel machining. This configuration delivers consistent chip control and a stable cutting edge, which reduces unplanned rework and keeps cycle times predictable. The design supports robust cutting parameters without compromising surface finish, so process planners can favour higher metal removal rates while maintaining component quality. Why the WPP35G grade benefits production The WPP35G grade is a coated carbide class tailored to the requirements of steel (ISO group P). Its balanced combination of wear resistance and toughness addresses the threefold demand profile often seen in mixed‑batch production: tenacity where needed, universality for varied steels, and wear resistance for longer runs. In practical terms this means fewer insert changes, lower tool‑handling time and improved overall equipment effectiveness — measurable gains in throughput and operability. Practical advantages on the shop floor Incorporating this insert into milling operations simplifies tooling logistics: the coated carbide chemistry and the Tiger‑tec Gold coating give a predictable wear pattern that aids tool‑life planning and inventory control. For operators, the result is easier parameter optimisation and reduced scrap rates. For managers, there is a clear contribution to operational efficiency through stable cutting behaviour and reliable dimensional repeatability on standard steel grades. Integrating the insert into process chains The insert is suitable for a wide range of steel applications and is particularly effective where a balance of durability and toughness is required. When paired with appropriate cutter bodies and cutting data calculated for steel, the insert supports higher productivity and consistent surface quality. For users unfamiliar with the grade, technical advice can be provided to align machining parameters with production goals and to clarify how coating technology influences recommended cutting speeds and feeds. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Gold inserts and receive tailored recommendations for steel milling applications Technical data SKU: P26337R14-WPP35G-WALTER Type: milling insert Brand: Walter Tools Grade: WPP35G Series: Tiger‑tec Gold Facts Designation: P26337R14 WPP35G Material suitability: P (steel) Coating: coated carbide (as specified by grade) Special features Coating technology: Tiger‑tec Gold Carbide class: coated carbide Application focus: steel machining (ISO P) Balanced wear resistance and toughness FAQ What steels is the insert suitable for? The insert is designed for ISO group P materials; the WPP35G grade is optimised for unalloyed and alloyed steels and addresses the typical heat and chip formation encountered when machining steel. How does the Tiger‑tec Gold coating improve performance? Tiger‑tec Gold enhances wear resistance and temperature stability; combined with the WPP35G grade the coating provides a predictable wear pattern and longer usable life for milling operations. Can this insert be used for finishing and roughing? The grade’s balance of toughness and wear resistance makes it versatile for both medium finishing and productive roughing in steel, depending on cutter geometry and cutting data. Is the insert supplied as single items or in packs? Packaging and supply options depend on the distributor; for ordering details and available pack sizes contact Metav Werkzeuge or the local Walter Tools representative. How should cutting data be adapted for different steel grades? Cutting speeds and feeds should be adjusted to the specific steel’s machinability and hardness; the WPP35G grade tolerates elevated parameters but final settings should be validated under process conditions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any connection or partnership with Metav Werkzeuge. The offered article is an original, factory‑new product from the listed manufacturer.
P26337R14 WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a tough, versatile carbide grade for reliable milling performance across Stahl, rostfreier Stahl and heat-resistant alloys; secure consistent component quality and efficient cycle times with Walter Tools inserts. Order directly via Metav Werkzeuge or request application advice from the Metav team. P26337R14 WSP45G milling indexable insert — Tiger·tec Gold, coated carbide by Walter Tools The P26337R14 WSP45G is a coated carbide milling insert from Walter Tools, engineered for versatile face and shoulder milling of Stahl, rostfreier Stahl and heat-resistant superalloys, offering stable cutting edges and reliable chip control. Tiger·tec Gold PVD coating for long tool life Designed for milling of Stahl and rostfreier Stahl Stable cutting edge for high process security Suitable for heat-resistant superalloys and titanium Increase productivity with a versatile, process-safe grade The Tiger·tec Gold WSP45G grade combines a tough, PVD-coated carbide to deliver consistent cutting edge stability during interrupted cuts and mixed-production runs. Designed for milling applications where varied materials appear in the same batch, the grade supports reliable chip formation and reduces the frequency of insert changes. The result is measurable cycle-time improvement and fewer machine idle periods, benefiting production schedules and operational throughput. Coating technology that extends tool life and reduces costs The Tiger·tec Gold coating provides thermal and wear resistance, translating into longer edge life under the typical heat loads of milling Stahl and rostfreier Stahl. Because the coating is engineered for typical chip formation patterns in these material groups, insert wear is slowed and regrinding intervals are reduced. For production planning this means lower tooling consumption and improved cost-efficiency without compromising surface quality or dimensional stability. Practical advantages for machining and surface finish The insert’s combination of substrate toughness and PVD coating promotes controlled chip breakage and stable cutting behaviour, which supports superior surface condition on finished parts. In applications where burr formation and built-up edge are concerns—particularly with rostfreier Stahl—the chosen grade helps maintain a sharp cutting line and consistent geometry. This leads to fewer downstream corrections and a smoother workflow from roughing to finishing. Application scope and selection guidance The material designation P / M / S signals the intended application range: P for Stahl, M for rostfreier Stahl and S for heat-resistant superalloys and titanium. Use this insert where mixed-material batches or demanding interrupted milling are expected. For optimal results match feed and speed to the workpiece material and machining strategy: the insert excels when cutting parameters exploit its thermal stability and edge robustness, enabling higher metal removal rates while maintaining process security. Contact Metav Werkzeuge for tailored application support and material-specific parameter recommendations for Walter Tools Tiger·tec Gold inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P26337R14-WSP45G-WALTER Article designation: P26337R14 WSP45G Internal code: P26337R14 Brand: Walter Tools Facts Material groups: P / M / S Suitable for: Stahl; rostfreier Stahl Series: Tiger·tec Gold Special features Coating technology: Tiger·tec Gold (PVD) Carbide type: coated hardmetal (beschichtetes Hartmetall) Grade characteristics: tough, versatile, good edge stability Typical application: milling, interrupted cuts, mixed-material batches FAQ Which materials can be machined with this insert? The insert is specified for machining Stahl, rostfreier Stahl and heat-resistant superalloys/titanium according to the P / M / S designation; the Walter Tools Tiger·tec Gold grade supports these groups with optimised thermal and wear resistance. What are the main benefits of the Tiger·tec Gold coating? Tiger·tec Gold provides enhanced thermal resistance and improved wear behaviour, so the WSP45G insert achieves longer tool life and more consistent surface quality under conventional and demanding milling conditions. Is this insert suitable for interrupted cuts? Yes, the carbide substrate and coating combination is engineered for stable cutting edges during interrupted milling, offering reliable chip control and reduced risk of catastrophic edge failure. How does the insert affect surface finish? Thanks to controlled chip formation and edge stability, the insert helps maintain dimensional accuracy and a good surface condition on milled components, particularly when parameters are adapted to the specific material group. How to choose the right grade for mixed-production runs? Select the WSP45G when production includes Stahl and rostfreier Stahl or when occasional superalloy work appears; the grade’s balanced toughness and coating performance deliver process security across varied materials. Hersteller: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26337R25 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the WKP25S grade and Tiger‑tec Silver coating to achieve long tool life and reliable chip control when machining steel and cast iron; the coated carbide construction provides stable cutting edges and repeatable surface quality. Order replacement inserts or request detailed cutting data via Metav Werkzeuge for a smooth production run. P26337R25 WKP25S indexable milling insert – Tiger‑tec Silver for steel and cast iron | Walter Tools The P26337R25 WKP25S is an indexable milling insert designed for productive machining of steel and cast iron, combining a coated‑carbide substrate with Walter Tools’ Tiger‑tec Silver technology for enhanced wear resistance. Tiger‑tec Silver coating for extended tool life Suited to steel and cast iron machining Coated carbide WKP25S for edge stability Consistent surface finish and chip control Greater process reliability through advanced coating and grade The Tiger‑tec Silver coating and the WKP25S grade form a combination engineered to resist flank and crater wear under the thermal and mechanical loads typical of steel and cast iron machining. As a coated carbide solution, the insert reduces the frequency of tool changes, which supports higher uptime and fewer interruptions in the machining cycle. The coating technology gives improved oxidation resistance and adhesion under elevated cutting temperatures, so the cutting edge remains sharper for longer and contributes directly to predictable component tolerances and consistent cycle times. Better chip control and improved surface results Optimised rake and edge geometry translate the insert’s material and coating properties into tangible benefits: controlled chip formation, fewer built‑up edges and improved surface finish on workpieces. The plate is matched to the ISO groups P and K, meaning the geometry and grade address the heat generation in steel and the abrasive, breaking chips of cast iron. The result is fewer secondary operations for deburring or reworking, and a stable machining process that supports tighter process windows and reproducible outcomes on serial production runs. Practical application and efficiency in production Using a recognised grade from a leading brand reduces process risk: the insert provides stable cutting behaviour across common steel and cast iron alloys and is suitable for a range of milling strategies where productivity and tool life are priorities. The design supports standard clamping systems for indexable inserts and integrates into existing toolholders without additional setup complexity. For manufacturers seeking to optimise cost per component, the reduced tool wear and reliable edge retention contribute to lower overall tooling costs and higher effective utilisation of machine time. Contact Metav Werkzeuge for tailored cutting parameters, sample availability or to discuss how the Walter Tools Tiger‑tec Silver inserts can be integrated into existing machining processes. Technical data Article number: P26337R25-WKP25S-WALTER SKU: P26337R25-WKP25S-WALTER Product type: Indexable milling insert (Fräswendeschneidplatte) Series: Tiger‑tec Silver Grade: WKP25S Manufacturer: Walter Tools Core data Material suitability: P / K Steel (ISO P): yes Cast iron (ISO K): yes Designation: P26337R25 WKP25S UID: P26337R25-WKP25S-WALTER Special features Coated carbide construction Tiger‑tec Silver coating technology Optimised for chip control and surface quality Consistent edge stability for productive milling operations FAQ Which materials are suitable for this insert? The P26337R25 WKP25S insert from Walter Tools is specified for steel (ISO P) and cast iron (ISO K) applications and is engineered to handle the typical heat and chip characteristics of those groups. What does the Tiger‑tec Silver coating deliver? The Tiger‑tec Silver coating on this insert enhances wear resistance and oxidation stability, which extends tool life and helps maintain consistent cutting performance during high‑temperature milling. Is this an indexable milling insert compatible with standard holders? Yes, the P26337R25 WKP25S is an indexable milling insert designed to fit standard toolholders for inserts of its designation; verify holder compatibility with the article designation before mounting. How does the WKP25S grade affect productivity? The WKP25S grade is a coated‑carbide solution focused on stable edge retention and broad applicability, supporting longer service intervals and fewer tool changes in productive milling operations. Can this insert improve surface finish on serial production parts? When used with appropriate cutting data and a suitable holder, the insert’s geometry and coating support controlled chip formation and reduced built‑up edge, contributing to improved surface finish across serial production. Manufacturer: Walter AG; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26337R25 WKP35G WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of robust Tiger·tec Gold coating and versatile P/K material compatibility for reliable, high-productivity milling. Order the insert directly via Metav Werkzeuge or consult our specialists for geometry-specific recommendations. P26337R25 WKP35G milling insert (coated carbide) for steel & cast iron — Walter Tools The P26337R25 WKP35G is a coated carbide milling insert from Walter Tools, engineered for efficient machining of steel and cast iron in production environments. Tiger·tec Gold coating for long tool life Coated carbide for reliable wear resistance Optimised for steel and cast iron machining Precise geometry for consistent surface quality Increased productivity through advanced coating technology The Tiger·tec Gold coating combines surface engineering and a high-performance cemented carbide substrate to deliver enhanced wear resistance and extended service life. By reducing flank and crater wear, the coating supports higher cutting parameters and longer tool cycles, which contributes directly to improved process economics. In practical terms, operators can expect fewer tool changes and more stable machining conditions during series production, especially when switching between typical steel grades and cast components. Reliable performance for steel and cast iron applications Designed for the ISO material groups P and K, the insert addresses the different demands of steel and cast iron machining. The grade WKP35G is tuned to handle the heat and chip formation characteristics of steels while simultaneously resisting the abrasive tendencies of cast materials. This balanced performance results in stable chip control and predictable wear behaviour, making the insert suitable for a broad range of milling tasks where reproducible results and surface quality are required. Consistent surface finish and process security With its engineered geometry and coated cemented carbide composition, the insert supports repeatable part quality and a stable cutting edge over extended runs. The main application can be catalogue- and geometry-dependent, so the combination of the insert's coating and grade enables adaptable use across different toolholders and machining strategies. For production managers, the advantage is clear: more consistent finishes and fewer interruptions, translating into higher throughput and reduced rework. For tailored advice on integrating the Tiger·tec Gold WKP35G grade into a specific setup, contact Metav Werkzeuge for availability and geometry matching: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P26337R25-WKP35G-WALTER Designation: P26337R25 WKP35G Product type: milling insert Series: Tiger·tec Gold Grade/sort: WKP35G Material group: P / K Manufacturer: Walter Tools UID: P26337R25-WKP35G-WALTER Core data Suitable for steel (P): yes Suitable for cast iron (K): yes Coated: yes (Tiger·tec Gold) Carbide base: cemented carbide Application dependency: catalogue / geometry specific Special features Coating technology: Tiger·tec Gold Grade properties: wear-resistant, broad material coverage Main benefits: extended tool life, stable chip formation Typical use: productive milling of steels and cast irons FAQ What materials is this insert suitable for? The P26337R25 WKP35G insert is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron in a variety of production tasks. What coating does the insert use and why does it matter? This grade features the Tiger·tec Gold coating, which improves wear resistance and enables higher cutting parameters, supporting longer tool life and greater process stability. How does the WKP35G grade affect chip formation? WKP35G is formulated to manage the typical chip behaviour of steels and the often-fragile chips of cast iron, promoting stable chip control and reducing the risk of irregular wear. Is the insert suitable for all milling geometries? The main application is catalogue- and geometry-dependent; the P26337R25 WKP35G performs best when matched to the recommended toolholder and insert geometry specified in technical documentation. Can this insert help reduce downtime in series production? Yes. The combination of the coated cemented carbide and the WKP35G grade supports extended cutting intervals and consistent edge performance, which together reduce tool changes and unplanned interruptions. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer.
P26337R25 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating technology, a WKP35S grade optimised for steel and cast iron, and reliable coated carbide wear performance to maintain stable, productive machining cycles; order directly via Metav Werkzeuge or consult the team for specification advice. P26337R25 WKP35S Fräswendeschneidplatte – coated carbide milling insert for steel & cast iron by Walter Tools The P26337R25 WKP35S is a coated carbide milling insert from Walter Tools, designed for high productivity in the machining of steel and cast iron across a wide range of geometries and cutting conditions. Tiger·tec Silver coating technology Optimised for steel and cast iron machining Coated carbide for improved wear resistance Higher throughput for steel and cast-iron operations The insert is engineered to deliver consistent cutting performance where repeatability matters. With the WKP35S grade in the Tiger·tec Silver series, the cutting edge combines a robust substrate and a tailored coating to resist abrasive wear typical of cast materials and the thermal loads of steel machining. This results in fewer tool changes and longer effective tool life, which in turn reduces downtime and increases net production time. The design supports stable chip formation during continuous or interrupted cuts, helping to maintain component tolerances and surface finish during extended runs. Coating and substrate explained for process reliability A coated carbide construction pairs a wear-resistant substrate with a specialised multi-layer surface finish. The Tiger·tec Silver coating reduces friction at the tool–workpiece interface and improves thermal resistance, which lowers the tendency for crater wear under elevated cutting temperatures. For operations that demand predictable tool behaviour, that combination is particularly valuable: the coating mitigates adhesive and abrasive wear mechanisms, while the carbide core provides the mechanical strength needed for interrupted cuts and variable feed conditions. The technical benefit is measurable in reduced scrap rates and more consistent part quality. Practical advantages in the workshop and production line Selecting this insert supports pragmatic production goals: enhanced process stability, straightforward tool management and compatibility with established milling toolholders. The designation follows ISO grouping for material suitability (P = steel, K = cast iron), so tool selection and process planning are simplified. Because the insert is part of a standard series, it integrates into existing tooling kits without special adaptations, allowing faster setup and predictable cycle times. For job shops and serial production alike, the outcome is improved machining efficiency and a clearer cost-per-part picture. Application guidance and recommended use cases This insert is especially suited to conventional and climb milling of unalloyed and alloyed steels and many cast-iron grades. It offers advantages in semi-finish and finishing passes where surface quality and dimensional control are required, and in roughing when stability is prioritised. To exploit the WKP35S grade fully, pair it with appropriate cutting parameters for the workpiece material and ensure the holder and spindle rigidity match the intended feeds and depths. When optimised, the insert contributes to fewer interventions and a steadier production flow. For specification checks, availability or to reserve items for upcoming production runs, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss the P26337R25 WKP35S and compatible tool solutions. Technical Data SKU: P26337R25-WKP35S-WALTER Product: Fräswendeschneidplatte (milling indexable insert) Series: Tiger·tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts ISO designation: P26337R25 WKP35S Material groups: P (steel), K (cast iron) Material: coated carbide (Hartmetall, beschichtet) Special features Coating: Tiger·tec Silver Main applications: machining steel and cast iron Substrate: P / K suitability Suitable for typical steel heat and chip formation patterns FAQ What materials is this insert suitable for? The P26337R25 WKP35S insert is formulated for machining steel (ISO group P) and cast iron (ISO group K), matching the thermal and abrasive demands of those materials. What does Tiger·tec Silver offer in practice? Tiger·tec Silver provides reduced friction and improved thermal resistance; in the P26337R25 WKP35S this leads to better wear behaviour and longer effective tool life under steel and cast-iron conditions. Is this insert compatible with standard milling holders? Yes, the insert follows common ISO-style indexing formats and integrates with standard milling toolholders designed for indexable inserts, enabling straightforward replacement and set-up. Which machining tasks benefit most from this grade? The WKP35S grade is effective in semi-finish and finish passes where surface quality and dimensional stability are important, and it also performs well in stable roughing when process reliability is required. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. No affiliation between Metav Werkzeuge and the mentioned brands is implied. The offered item is an original, factory-new product.
P26337R25 WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the robust WPP35G carbide grade and a geometry optimised for steel machining to achieve consistent performance and extended tool life. Order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. P26337R25 WPP35G — milling indexable insert, Tiger·tec Gold coating | Walter Tools P26337R25 WPP35G is a milling indexable insert engineered for efficient steel removal in industrial machining applications. Tiger·tec Gold coating for wear resistance Optimised for steel machining (ISO P) Coated carbide for extended tool life Consistent chip control and stable cutting Durable performance for demanding steel operations The Tiger·tec Gold coating on this coated carbide grade provides a strong barrier against abrasive and adhesive wear commonly encountered when machining steel, enabling longer intervals between index changes. The WPP35G grade combines a balanced hardness and toughness, which results in reliable tool life under mixed cutting conditions. For production environments where process stability is critical, the insert’s engineered surface layers help maintain cutting-edge integrity and reduce the frequency of unplanned stops. Predictable chip behaviour and secure cutting results Machining steel typically produces long, heat-prone chips; the grade and geometry used here are selected to encourage controlled chip formation and effective evacuation. The cutting edge design supports stable chip breaking and reduces the risk of built-up edge, which in turn secures dimensional accuracy and surface finish. Even for operators less familiar with coating technology, this insert offers an intuitive performance profile: the coating minimises friction while the substrate absorbs transient loads, delivering consistent chip control and fewer tool-related process deviations. Practical workshop benefits and application range The WPP35G grade is intended for ISO P applications and covers a spectrum from wear-resistant to tougher steels, making it suitable for universal production as well as more demanding components. Integration into standard milling toolholders is straightforward, allowing quick index changes and predictable inventory management. By reducing downtime and increasing the interval between tool changes, the insert contributes directly to productive machining and improved per-part economics. Walter Tools’ series focus ensures familiar cutting data and stable repeatability across batches. For specific cutting data, toolholder compatibility or application advice on the P26337R25 WPP35G Tiger·tec Gold insert, contact Metav Werkzeuge – technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: P26337R25-WPP35G-WALTER Article: milling indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Material group: P (steel) Facts ISO material group: P Suitable for steel machining Coated carbide grade Special features Tiger·tec Gold coating technology Coated carbide for enhanced wear resistance Optimised for ISO P steels (unalloyed and alloyed steel) Designed for consistent chip control and stable cutting FAQ Which materials can be machined with this insert? The P26337R25 WPP35G insert is designed primarily for steel (ISO P) including unalloyed and alloyed steels, offering versatility across universal to tougher steel grades. Is the cutting grade coated and what is the benefit? Yes, WPP35G is a coated carbide grade within the Tiger·tec Gold series; the coating reduces friction and wear, improving tool life and process stability in steel machining. How does the insert affect chip control? The combination of geometry and WPP35G grade promotes predictable chip formation and efficient evacuation, which supports consistent surface finish and dimensional accuracy. Can the insert be used in standard milling holders? The indexable format is compatible with common milling toolholders; the insert enables quick indexing and straightforward integration into existing tool setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
P26337R25 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated Tiger·tec Gold grade that combines reliable edge stability with broad material versatility for efficient milling. The insert’s WSP45G grade ensures consistent chip control in demanding operations on Stahl, rostfreier Stahl and heat-resistant alloys; order through Metav Werkzeuge or consult our specialists for application support. P26337R25 WSP45G indexable milling insert — Tiger·tec Gold, Walter Tools P26337R25 WSP45G is an indexable milling insert designed for versatile milling across a wide range of materials, optimised for high productivity and stable cutting performance Tiger·tec Gold PVD coating Robust coated carbide grade WSP45G Suited for Stahl and rostfreier Stahl Stable edge for high-productivity milling High-process reliability and consistent cutting performance The Tiger·tec Gold coating technology on this insert delivers a balanced combination of wear resistance and edge toughness, resulting in predictable tool life under varying cutting conditions. Designed as a coated carbide grade, the geometry and coating interact to improve chip formation and reduce built-up edge when machining Stahl and rostfreier Stahl. The engineered surface minimises friction and enhances heat resistance, which translates to fewer tool changes and smoother production runs. Broad material capability with fewer tool changes This grade supports a wide ISO range (P/M/S), making it suitable for unalloyed and alloyed Stahl, rostfreier Stahl and tougher superalloys or Titanium components. The result is a single, adaptable solution for shops handling mixed production batches: one insert type reduces tooling complexity while maintaining cut quality. Clear differentiation between substrate and coating ensures the insert keeps a stable cutting edge even under intermittent engagement and variable feed rates. Practical benefits for workshop productivity The combination of a reliable substrate and PVD-coated surface leads to improved chip control and surface finish, reducing rework and inspection time. Operators will notice improved predictability in tool life, which simplifies process planning and inventory management. For production environments focused on cycle-time reduction, the insert’s geometry supports efficient material removal rates without compromising part tolerances. Selection and application guidance When selecting parameters, prioritise feeds and depths that match machine rigidity and workpiece clamping; the insert’s toughness favours slightly more conservative speeds on heat-resistant alloys and higher feeds on Stahl for increased throughput. If machining rostfreier Stahl, anticipate elevated temperatures and favour parameters that promote stable chip evacuation. For specific cutting data and parameter windows, Metav Werkzeuge can provide tailored recommendations based on component geometry and machine capability. For reliable, high-productivity milling with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for specification advice or to secure the correct inserts and cutting data for the application. Technical data SKU: P26337R25-WSP45G-WALTER Article designation: P26337R25 WSP45G Product type: Indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Material group: P / M / S Key figures Coating type: Tiger·tec Gold (PVD) Substrate: Coated carbide Application groups: P, M, S Special features Versatile PVD-coated grade for mixed production Enhanced heat resistance and edge stability Improved chip formation for machining stainless and alloyed steels Designed for milling operations with stable clamping and rigidity FAQ What materials can this insert machine effectively? This insert, the P26337R25 WSP45G from Walter Tools, is formulated for ISO groups P, M and S, making it suitable for Stahl, rostfreier Stahl and heat-resistant superalloys including Titanium Is Tiger·tec Gold suitable for high-speed milling? Yes, the Tiger·tec Gold PVD coating improves heat resistance and wear behaviour, supporting higher cutting speeds where machine and clamping stability allow How does the WSP45G grade improve chip control? The WSP45G grade combines coated carbide substrate and tailored edge geometry to promote predictable chip breakage and evacuation, reducing the risk of built-up edge during milling Can this insert reduce tooling complexity in mixed production? The broad application range of this grade allows consolidation of tooling for mixed batches, decreasing inventory variety while maintaining consistent surface quality Where to obtain cutting data for challenging alloys? Metav Werkzeuge can supply recommended cutting parameters for specific alloys and component geometries when using the P26337R25 WSP45G insert Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned for explanation only. There is no affiliation between our company and the trademark owners. The offered item is an original, brand-new product from the manufacturer.
P26339R10 WKP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, coated carbide construction and proven suitability for steel and cast iron to secure stable tool life and consistent component quality. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. P26339R10 WKP35G milling indexable insert — Tiger·tec Gold, for steel and cast iron | Walter Tools The P26339R10 WKP35G is an indexable milling insert engineered for productive machining of unalloyed and alloyed steel and cast iron, offering a coated carbide grade designed to improve wear behaviour and process reliability. Tiger·tec Gold coated grade WKP35G Coated carbide for steel and cast iron High wear resistance and edge stability Designed for productive milling applications Improved tool life through optimised coating and substrate The combination of Tiger·tec Gold coating and a coated carbide substrate provides a balance of thermal resistance and toughness that reduces abrasive and adhesive wear. This means longer intervals between indexing or replacement, improving overall uptime. The insert’s construction supports controlled wear progression so that tool changes remain predictable, which in turn enhances production planning and reduces unexpected downtime. Reliable performance when machining steel and cast iron Designed specifically for ISO groups P and K, the grade responds to the typical heat generation and chip formation encountered when machining steel and cast iron. The geometry and coating technology promote stable cutting edges and help maintain consistent dimensional results even under mixed production conditions. For shops machining a range of alloyed steels and cast components, the insert offers a versatile solution that minimises the need for multiple specialised grades. Productivity gains and process security for milling operations The insert’s wear-resistant surface and edge stability translate directly into process security: fewer interruptions for tool maintenance, more consistent surface finish and repeatable cycle times. These benefits support higher throughput and reduced total machining cost per part. In operations where repeatability and component quality are critical, a stable insert grade contributes to overall process control and predictable output. Practical integration and selection advice for production use This indexable insert fits standard milling tool systems compatible with the specified ISO designation and should be selected according to the cutter body and intended milling strategy. Because geometry and cutter setup influence the final result, users are advised to match the grade to the toolholder and cut parameters. For specific applications and geometry-dependent recommendations, consult technical specialists to ensure the grade meets both the material and productivity targets. Contact Metav Werkzeuge to confirm suitability of the Walter Tools P26339R10 WKP35G for the intended machining task and to arrange supply or technical guidance from the Metav team Technical Data Article number: P26339R10-WKP35G-WALTER SKU: P26339R10-WKP35G-WALTER Product name: Fräswendeschneidplatte P26339R10 WKP35G Brand: Walter Tools Series: Tiger-tec Gold Material group: P / K Core data Coating: Tiger·tec Gold (coated) Grade: WKP35G Material base: Coated carbide Suitable for: Steel (P) Suitable for: Cast iron (K) Special features Coated carbide construction Optimised for heat and chip control on P and K materials Engineered for stable edge life and productive machining Catalogue/geometrie-dependent primary applications FAQ What materials is this insert intended for? The P26339R10 WKP35G insert is intended for ISO material groups P (steel) and K (cast iron), offering machining reliability on both unalloyed and alloyed steels as well as cast components. How does the Tiger·tec Gold technology benefit milling operations? Tiger·tec Gold coating enhances thermal and abrasive resistance of the coated carbide, delivering improved wear behaviour, edge stability and longer service intervals for the P26339R10 WKP35G. Is this insert suitable for high-volume production runs? Yes. The wear resistance and stable edge life of the WKP35G grade support high-volume production by reducing unplanned tool changes and maintaining repeatable component quality. Does the insert require specific cutter bodies or geometries? Selection should consider cutter body compatibility and cutting geometry; the P26339R10 WKP35G performs best when matched to the appropriate toolholder and milling strategy, with final recommendations depending on the exact cutter geometry. Can this insert handle mixed batches of steel and cast iron components? The coated carbide grade is formulated to handle both steel and cast iron; it offers versatility for mixed production, though optimal parameters may differ between the two material groups. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Mark names and protected product designations are included for explanatory purposes only and do not imply any affiliation with our company. The listed article is an original, factory-new product of the manufacturer.
P26339R10 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of a high-performance, coated carbide grade that combines consistent tool life and reliable chip behaviour for productive milling of steel and cast iron. For ordering or detailed application advice, contact Metav Werkzeuge or request support from our consultants. P26339R10 WKP35S milling insert – Tiger·tec Silver coating for steel and cast iron | Walter Tools The P26339R10 WKP35S is a coated carbide milling insert optimised for medium- to high-productivity milling operations on steel and cast iron, utilising Walter Tools' Tiger·tec Silver technology to enhance wear resistance and process stability. Tiger·tec Silver coating for extended life Coated carbide grade WKP35S for ISO P and K Stable edge for productive milling Faster, more consistent metal removal on steel and cast iron The combination of a coated carbide substrate and the Tiger·tec Silver treatment supports stable cutting under the typical heat and chip conditions of ISO group P (steel) and K (cast iron) materials. This results in consistent metal removal rates and fewer unscheduled tool changes. The insert’s composition is focused on predictable wear behaviour, which means shops can expect a reduced variability in component quality and longer intervals between tool replacements. The design is suited to continuous and mixed-batch production environments where maintaining throughput with minimal intervention is a priority. Improved surface finish and controlled chip formation A key advantage of the Tiger·tec Silver technology is better chip control during severe milling cuts, which contributes directly to an improved surface quality of machined components. The coated grade minimises edge breakdown and supports the formation of short, manageable chips when machining cast iron, while also coping with the more ductile chips from steel. That stability translates into fewer rework cycles and a steadier downstream process, supporting higher first-pass yield in production lines that process a range of ferrous materials. Robust grade engineered for process security and tool life WKP35S is a coated carbide grade engineered to balance wear resistance and toughness for a broad material spectrum within the ferrous category. The grade is particularly effective where abrasive wear from cast materials competes with the thermal and mechanical stresses encountered when machining steels. The result is improved process security, meaning operators can plan toolpaths and feeds with greater confidence that the insert will perform repeatably across shifts and batches, supporting predictable maintenance planning and cost calculations. Practical application guidance for efficient integration The insert is suitable for conventional and climb milling operations in a wide range of machine setups. When paired with appropriate toolholders and cutting parameters aligned to the workpiece material and machining strategy, the grade supports productive roughing and finishing passes. For best results, correlate feed and speed settings to the workpiece ISO group (P or K) and monitor tool wear trends during initial production runs. For tailored parameter recommendations and holder compatibility, Metav Werkzeuge can provide application-specific guidance. For tailored recommendations on Walter Tools’ Tiger·tec Silver inserts such as the P26339R10 WKP35S and to discuss suitability for specific production scenarios, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert application support and ordering advice Technical data SKU: P26339R10-WKP35S-WALTER Designation: P26339R10 WKP35S Series: Tiger·tec Silver Manufacturer: Walter Tools Core data UID: P26339R10-WKP35S-WALTER Material code: P / K Product type: milling insert Special features Coated carbide (beschichtetes Hartmetall) Suitable for steel (ISO P) Suitable for cast iron (ISO K) Grade: WKP35S Optimised for stable chip formation and process security FAQ Which materials are recommended for this insert? The P26339R10 WKP35S is recommended for machining steel (ISO P) and cast iron (ISO K); the WKP35S grade is formulated to cope with the typical heat and chip conditions of these material groups. What does the Tiger·tec Silver series provide? Tiger·tec Silver is a coating technology from Walter Tools that enhances wear resistance and cutting-edge stability, which improves tool life and process reliability for the P26339R10 WKP35S. Is the insert suitable for both roughing and finishing? Yes. The coated carbide composition of the WKP35S grade supports both productive roughing and controlled finishing when cutting parameters and toolholder selection are matched to the workpiece material. How does the insert affect chip control and surface quality? The Tiger·tec Silver-treated grade promotes stable chip formation, reducing the occurrence of long, uncontrolled chips and supporting a more consistent surface finish on both steel and cast iron. Where can technical parameter recommendations be obtained? Parameter recommendations and holder compatibility for the P26339R10 WKP35S can be provided by Metav Werkzeuge, which offers application support tailored to specific machines and production requirements. The Walter AG (brand name: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners. Brand names and protected product names are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original factory-new product of the manufacturer.
P26339R10 WPP35G Wendeplatten - Walter Tools
Take advantage of the WPP35G coating and Tiger·tec Gold technology to achieve longer tool life and consistent chip formation for efficient machining of Stahl; order directly via Metav Werkzeuge or request tailored advice from our consultants. P26339R10 WPP35G milling insert – coated carbide, Tiger·tec Gold, for Stahl by Walter Tools P26339R10 WPP35G is a coated carbide milling insert designed for general steel machining, combining wear resistance and toughness for reliable production performance Tiger·tec Gold coating for prolonged tool life High performance specifically for Stahl applications Coated carbide grade WPP35G for broad versatility Stable cutting edge for consistent surface finish Higher productivity through advanced coating and grade The P26339R10 WPP35G insert employs the Tiger·tec Gold coating on a coated carbide substrate to deliver a clear machining advantage on Stahl. The multilayer surface treatment reduces adhesive wear and improves resistance to thermal and mechanical loads, which translates into longer in‑service life and fewer tool changes. For operations where consistency and uptime matter, this combination helps to keep cycle times stable and tool management simplified. Consistent surface quality and edge reliability A key benefit of the grade is its stable cutting edge, which supports repeatable component finish across batches. The engineered coating and substrate balance minimises crater wear and flank deterioration, resulting in a more uniform surface finish and reduced rework. For production environments that value predictable results, the insert’s behaviour under continuous cutting forces helps maintain quality standards and reduces scrap rates. Versatile application range with economical machining Designed for the ISO group P (Stahl), the WPP35G grade addresses a spectrum of cutting demands by balancing wear resistance and toughness (noted in its 10/20/30/35 performance positioning). This makes it suitable for varied machining strategies—from more aggressive cuts to finishes where edge life and stability are required. The result is an economical solution that supports process reliability and efficient material removal, helping to lower total machining costs through fewer interventions and steady productivity. Contact Metav Werkzeuge for personalised application advice and reliable supply of Walter Tools Tiger·tec Gold inserts Technical data SKU: P26339R10-WPP35G-WALTER Product designation: P26339R10 WPP35G Product type: milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Material group: P (coated carbide) Facts Grade: WPP35G Applicable material group: P (Stahl) ISO designation: P26339R10 WPP35G Special features Coating: Tiger·tec Gold Substrate: coated carbide (beschichtetes Hartmetall) Designed for machining Stahl Balanced wear resistance and toughness (10 / 20 / 30 / 35 categories) FAQ Which materials is this insert intended for? The P26339R10 WPP35G insert is specified for the ISO group P, meaning it is intended primarily for the machining of Stahl. What makes the WPP35G grade different from other grades? WPP35G, part of the Tiger·tec Gold family by Walter Tools, combines a wear‑resistant coating with a tough substrate to provide a compromise between tool life and edge robustness for varied cutting conditions. How does the Tiger·tec Gold coating benefit machining performance? The Tiger·tec Gold coating reduces adhesive and abrasive wear, improves thermal stability and supports consistent chip formation when using the P26339R10 WPP35G insert in Stahl applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany; Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the mentioned brands; products offered are original factory‑new items of the respective manufacturer.
P26339R10 WSM35G WSM35G Wendeplatten - Walter Tools
Combining Tiger‑tec Gold coating and a coated carbide body, this insert offers improved wear resistance and a stable cutting edge for machining stainless steels and heat‑resistant superalloys; order the P26339R10 WSM35G insert directly via Metav Werkzeuge or ask our consultants if needed. P26339R10 WSM35G milling insert, Tiger‑tec Gold coated – Walter Tools A P26339R10 WSM35G milling indexable insert designed for secure chip formation and robust performance when machining stainless steels and high‑temperature alloys. Tiger‑tec Gold coated carbide Suited for stainless steels and superalloys Stable cutting edge for heavy operations Compatible with ISO 513 material groups Improved cutting stability for difficult materials The Tiger‑tec Gold coating on a coated carbide substrate provides enhanced resistance to abrasive and adhesive wear, which is particularly important when working with stainless steels and heat‑resistant alloys. The microstructure and multilayer coating technology support a stable cutting edge, reducing the risk of built‑up edge and edge degradation that commonly occur with tough, ductile materials. For production environments this means more consistent component quality and fewer interrupted tool changes, improving machining reliability. Greater process security and predictable tool life Designed for materials in ISO 513 groups M and S, the grade WSM35G targets applications where heat generation and poor thermal conductivity place heavy demands on the tool. The combination of substrate and coating increases process security by supporting predictable wear patterns and maintaining cutting geometry over longer cycles. This results in extended tool life and more reproducible finishing – an advantage for batch production and finishing operations where stability of the machining process is a priority. Integration into existing milling systems and selection advice The insert is intended for standard indexable milling toolholders that accept the P26339R10 style designation and is compatible with a range of geometries depending on the cutter body used. When pairing with cutting tool systems, attention to recommended feeds, speeds and depth of cut for stainless steels and superalloys ensures optimal performance. For complex workpieces or mixed material batches, choosing the correct geometry and seat in the cutter body helps to exploit the insert’s stable cutting edge and coating advantages while preserving surface integrity and dimensional repeatability. For robust, high‑temperature machining tasks, contact Metav Werkzeuge to specify Walter Tools Tiger‑tec Gold inserts and receive tailored application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: P26339R10-WSM35G-WALTER Name: Fräswendeschneidplatte P26339R10 WSM35G Walter Tools Type: Fräswendeschneidplatte (milling insert) Grade: WSM35G Series: Tiger‑tec Gold Manufacturer: Walter Tools Facts Suitable ISO material groups: M, S Applicable material types: stainless steels, superalloys Material substrate: coated carbide Special features Coating technology: Tiger‑tec Gold Sort description: coated cemented carbide grade for heat resistance Main applications: machining of rostfreier Stahl and heat‑resistant superalloys Proven for stable chip formation and reliable edge behaviour FAQ What materials is this insert suitable for? The P26339R10 WSM35G is suitable for stainless steels (ISO group M) and heat‑resistant superalloys/titanium (ISO group S), as indicated by its design and coating. How does the Tiger‑tec Gold coating help in demanding operations? The Tiger‑tec Gold coating on the insert enhances wear resistance and protects the cutting edge against high temperatures, which supports longer tool life and consistent machining results. Can this insert be used in standard milling cutters? Yes; the insert follows the P26339R10 designation and is compatible with milling toolholders designed for that style of indexable insert, subject to verification of seat geometry and clamping method. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany; Walter Tools is a brand of Walter AG Protected trademarks and trade names belong to their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods from the manufacturer.
P26339R10 WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold PVD coating, broad material compatibility for P/M/S applications, and a robust carbide substrate for consistent milling performance; order directly via Metav Werkzeuge or consult our specialists for process-matched recommendations. P26339R10 WSP45G milling insert – Tiger·tec Gold coated milling insert by Walter Tools The P26339R10 WSP45G is a coated carbide milling insert designed for versatile milling of steel, stainless steel and heat-resistant alloys in industrial milling operations. Tiger·tec Gold PVD coating Versatile for steel, stainless and superalloys Robust, long-lasting cutting edge High productivity through coating and substrate technology The combination of the Tiger·tec Gold PVD coating and a coated carbide substrate provides a balance of wear resistance and edge stability that supports productive milling cycles. The coating reduces adhesive wear and improves heat resistance, while the carbide base offers the mechanical strength required for interrupted cuts and high metal removal rates. This technical pairing translates into fewer tool changes and more consistent surface finishes in production environments. Reliable performance across P, M and S material groups Specified for machining under ISO 513 groups P, M and S, the insert is suitable for unalloyed and alloyed steel, stainless steel and heat-resistant superalloys or titanium alloys. The grade is tuned for the thermal and mechanical demands of each group, promoting stable chip formation and reduced built-up edge when used in the correct cutting data window. For manufacturers seeking process stability, this broad applicability simplifies tooling decisions across mixed-production shops. Practical benefits for toolroom integration and process planning The indexable design enables quick replacement and repeatable positioning in compatible milling cutters, reducing machine downtime. With its robust cutting edge, the insert supports consistent dimensional results and surface quality over longer tool life, which benefits batch production and series manufacturing. Integration into existing toolholders is straightforward, and performance optimisation is achieved by selecting appropriate feeds, speeds and coolant strategies for the material in question. For precision milling with Walter Tools' Tiger·tec Gold technology, contact Metav Werkzeuge for tailored application advice and order support Technical data Article number: P26339R10-WSP45G-WALTER Designation: P26339R10 WSP45G Series: Tiger·tec Gold Grade: WSP45G Core data Applicable material groups: P, M, S Suitable for: Steel; Stainless steel; Superalloys / Titanium Insert type: Milling insert Special features Coating: PVD (Tiger·tec Gold) Substrate: Coated carbide Manufacturer: Walter Tools Typical application: Milling operations FAQ What materials can this insert machine? The insert is specified for ISO groups P, M and S, so it is suitable for steel, stainless steel and heat-resistant superalloys or titanium in milling applications. Is the coating suitable for high-temperature cutting? Yes, the Tiger·tec Gold PVD coating on the P26339R10 WSP45G enhances heat resistance and wear performance in elevated cutting temperatures. Can this insert be used in interrupted cuts and heavy milling? The coated carbide substrate and robust edge design support interrupted cuts and demanding milling operations when used with appropriate cutter bodies and cutting data. How is the insert identified when ordering? Order using the article number or SKU P26339R10-WSP45G-WALTER to ensure the correct Tiger·tec Gold grade and geometry. Which manufacturer provides this insert and what is its provenance? Walter Tools is the manufacturer; the insert is an original factory-new product supplied under the Walter brand and Tiger·tec Gold series. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered item is original, factory-new merchandise of the manufacturer, Walter Tools.
P26339R14 WKP35G Wendeplatten - Walter Tools
P26339R14 WKP35G Fräswendeschneidplatte von Walter Tools P26339R14 WKP35G ist eine beschichtete Fräswendeschneidplatte zur produktiven Bearbeitung von Stahl und Gusseisen im industriellen Fräsprozess. Beschichtetes Hartmetall Tiger·tec Gold Geeignet für Stahl und Gusseisen Optimierte Spanbildung und Prozesssicherheit Lange Standzeit und reproduzierbare Leistung Produktivität steigern durch stabile Schneideeigenschaften Die WKP35G Schneidstoffsorte innerhalb der Tiger·tec Gold Serie bietet eine Kombination aus verschleißfestem beschichtetem Hartmetall und optimierter Oberflächenstruktur, die die Produktivität erhöht. Durch die abgestimmte Beschichtung reduziert sich der Verschleiß bei typischen Fräsbedingungen, sodass Rüstzyklen seltener und Stillstandzeiten kürzer ausfallen. Das Ergebnis ist eine wirtschaftlichere Fertigung bei gleichbleibender Maßhaltigkeit. Materialkompetenz und passende Einsatzgebiete Die Wendeschneidplatte ist für die Bearbeitung von Stahl (Werkstoffgruppe P) und Gusseisen (Werkstoffgruppe K) ausgelegt. P steht für unlegierte und legierte Stähle, K für abrasive Gusswerkstoffe mit brockenden Spänen. Diese klare Werkstoffzuordnung erleichtert die Auswahl der richtigen Platte für spezifische Fertigungsaufgaben und minimiert das Risiko ungeeigneter Anwendung durch Anwender mit unterschiedlichem Erfahrungsgrad. Dauerhaftigkeit und Prozesssicherheit als Kostenvorteil Die Geometrie und der Schneidstoff der Wendeschneidplatte sind auf stabile Spanbildung und reproduzierbare Schnittbedingungen ausgelegt, was zu einer verlängerten Standzeit und gleichbleibender Oberflächengüte führt. Anwender profitieren von planbaren Laufzeiten und reduzierten Nachbearbeitungen, wodurch die Gesamtkosten pro Bauteil sinken. Für Fertigungsbetriebe bedeutet das: höhere Auslastung der Maschine und bessere Kalkulationssicherheit. Empfehlung: Die WKP35G Wendeschneidplatte von Walter Tools über Metav Werkzeuge anfragen für eine wirtschaftliche und prozesssichere Zerspanung; Technische Beratung per eMail info@metav-werkzeuge.com oder Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: P26339R14-WKP35G-WALTER Bezeichnung: P26339R14 WKP35G Marke: Walter Tools Baureihe: Tiger-tec Gold Daten Besonderheiten Material: beschichtetem Hartmetall Werkstoffgruppe P: Stahlbearbeitung Werkstoffgruppe K: Gusseisenbearbeitung Anwendung: Fräsen Sortenbeschreibung: WKP35G ist eine Walter-Schneidstoffsorte Optimierte Spanbildung Prozesssicherheit FAQ Was bedeutet die Kennzeichnung P und K für die Anwendung? P steht für die Bearbeitung von Stählen, darunter unlegierte und legierte Stähle; K steht für Gusseisen mit abrasiver Verschleißcharakteristik. Die P26339R14 WKP35G Fräswendeschneidplatte ist für beide Werkstoffgruppen ausgelegt. Ist die Platte für rostfreien Stahl geeignet? Für rostfreien Stahl liegen keine Angaben vor; die P26339R14 WKP35G Wendeschneidplatte ist primär für Stahl und Gusseisen spezifiziert. Welche Vorteile bringt die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung verbessert die Verschleißfestigkeit und Stabilität der Schneidkante, was zu längeren Standzeiten und konstanteren Bearbeitungsergebnissen führt. Wird die Platte in speziellen Fräsaufnahmen montiert? Die Wendeplatte ist als Fräswendeschneidplatte für übliche Fräswerkzeugaufnahmen vorgesehen; die passende Haltergeometrie richtet sich nach Werkzeughersteller und Applikation. Wie unterstützt die Sorte WKP35G die Oberflächengüte? Durch stabile Spanbildung und verschleißarme Beschichtung trägt die WKP35G Sorte zu gleichmäßigen Schnittbedingungen bei, wodurch sich die Oberflächengüte von Bauteilen verbessert. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26339R14 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the proven Tiger‑tec Silver coating combined with the WKP35S grade for efficient, repeatable milling of steel and cast iron; order original inserts via Metav Werkzeuge or consult our technical advisors for process optimisation. P26339R14 WKP35S milling indexable insert – Tiger‑tec Silver, for steel and cast iron | Walter Tools A P26339R14 WKP35S milling indexable insert engineered for high‑productivity machining of steel (ISO group P) and cast iron (ISO group K). Tiger‑tec Silver coated carbide Designed for steel and cast iron Stable chip control and long tool life Consistent productivity through optimised grade and coating The Tiger‑tec Silver coating and the WKP35S grade combine to deliver wear resistance and thermal stability that support continuous milling cycles. Because the grade is a coated carbide, it is designed to tolerate the heat and abrasive action common when machining steel and cast iron, which helps to reduce flank wear and preserve the cutting edge. The result is fewer insert changes and higher machine uptime, directly improving process efficiency and lowering unit cost per component. Predictable surface finish and reliable chip behaviour Thanks to its engineered cutting geometry and coating interplay, this indexable plate promotes stable chip control, which reduces the risk of workpiece damage and improves surface quality. For operations where predictable chip breakage matters—such as semi‑roughing interrupted cuts or continuous finishing passes—the coated carbide composition supports repeatable results. The combination of thermal robustness and consistent edge condition contributes to reduced rework and a steadier production flow. Practical application and integration into existing toolsets The insert is suitable for a wide range of milling applications on steel and cast iron and integrates into standard tool holders that accept this ISO designation. Selection of cutting parameters should follow the toolholder and machine capabilities, with adjustments for part rigidity and coolant strategy. For workshops aiming to scale throughput while maintaining quality, this grade offers a straightforward upgrade path: improved tool life and less process variation with minimal change to existing setups. Contact Metav Werkzeuge today for original Walter Tools Tiger‑tec Silver inserts and receive tailored application advice by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: P26339R14-WKP35S-WALTER Core specifications ISO designation: P26339R14 WKP35S Series: Tiger‑tec Silver Grade family: coated carbide Special features Material application: Steel (P) Material application: Cast iron (K) Product type: milling indexable insert Manufacturer: Walter Tools FAQ Is this insert suitable for both steel and cast iron? The P26339R14 WKP35S insert is specifically designed for ISO groups P (steel) and K (cast iron), providing tailored wear resistance and chip behaviour for those materials. What benefits does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating enhances thermal stability and reduces abrasive wear, helping the insert to maintain cutting performance and prolong tool life in demanding milling tasks. Can the insert be used for roughing and finishing? Yes; depending on the tool geometry and machine setup, the grade supports both semi‑roughing and finishing operations while maintaining consistent surface quality. How does chip control improve machining reliability? Stable chip control minimises interruptions from tangled chips and reduces the risk of surface defects, resulting in fewer stoppages and more predictable cycle times when using this indexable plate. Is the insert compatible with standard milling toolholders? The P26339R14 WKP35S follows the ISO designation and is compatible with holders that accept this insert type; confirm holder compatibility before mounting. Walter Tools / Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Mention of brand names and trademarks is for explanatory purposes only and does not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product from the manufacturer.
P26339R14 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger‑tec Gold coating and a coated cemented carbide body for consistent wear resistance and reliable milling performance; order directly via Metav Werkzeuge or request application advice from their consultants. P26339R14 WPP35G — Milling indexable insert, Tiger‑tec Gold coated carbide for steel | Walter Tools The P26339R14 WPP35G milling insert is designed for efficient steel machining, offering a coated cemented carbide construction and the Tiger‑tec Gold coating for improved process stability. Tiger‑tec Gold coating for high process security Coated carbide for extended tool life Optimised for steel machining (ISO group P) Reliable cutting‑edge stability under load Consistent performance from a Tiger‑tec Gold grade The insert belongs to the Tiger‑tec Gold series and uses a coated cemented carbide grade designed for the thermal and mechanical demands of steel machining. This combination improves wear resistance and maintains a stable cutting edge during interrupted cuts or heavy milling passes. For production environments where predictable tool life and low variation between inserts are crucial, this grade reduces unplanned tool changes and helps keep cycle times consistent. Predictable chip formation and material suitability Engineered specifically for the ISO P group, the geometry and grade selection support the chip formation typical for a wide range of steels, from unalloyed to alloyed variants. The WPP35G grade balances wear resistance and toughness, offering a broad application window across finishing and roughing operations. The result is improved surface finish with fewer passes and reduced risk of built‑up edge under moderate cutting speeds. Practical advantages for milling operations As an indexable milling insert, the design facilitates rapid replacement and reduced downtime compared with brazed or solid tools. The coated carbide body and Tiger‑tec Gold technology contribute to longer intervals between regrinds and replacements, which translates into lower tooling logistics and processing costs over time. The insert format also allows integration into standard milling cutter bodies for flexible tooling set‑ups. Application guidance and compatibility The grade WPP35G is primarily intended for steel applications and delivers a mix of durability and versatility suitable for many workshop and production tasks. Selection of cutting parameters should consider workpiece material, rigidity of the set‑up and type of milling operation; the insert’s coating supports thermal stability, allowing reliable results across a range of feeds and depths of cut. For exact cutter compatibility and parameter recommendations, refer to toolholder specifications and machining data. Contact Metav Werkzeuge for tailored grade selection and application advice; Metav Werkzeuge can assist with cutter compatibility, parameter recommendations and supply logistics Technical Data SKU: P26339R14-WPP35G-WALTER Name: Milling indexable insert P26339R14 WPP35G Manufacturer: Walter Tools Series: Tiger‑tec Gold Facts Material class: P (suitable for steel) Grade: WPP35G Coating: Tiger‑tec Gold Special features Coated cemented carbide grade Suitable for steel machining (ISO P) Balanced wear resistance and toughness (10 / 20 / 30‑35 classification) Stable cutting edge for milling applications FAQ What materials is this insert intended for? The P26339R14 WPP35G insert is intended for machining steel and is specified for the ISO P material group. Which series and coating does the insert use? This indexable insert belongs to the Tiger‑tec Gold series and features a Tiger‑tec Gold coating on a coated cemented carbide substrate. Can the insert be used for both roughing and finishing? The WPP35G grade offers a balance between wear resistance and toughness, making it suitable across a range of roughing and finishing operations in steel. How does this insert affect tool life and process reliability? Thanks to the coated carbide construction and Tiger‑tec Gold technology, the insert provides improved wear resistance and cutting‑edge stability, supporting predictable tool life and higher process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
P26339R14 WSM35G WSM35G Wendeplatten - Walter Tools
Choose the Tiger·tec Gold grade WSM35G insert for consistent performance when machining rostfreier Stahl and heat‑resistant superalloys; the coated carbide construction offers thermal resistance and stable cutting edges for productive milling. Order the P26339R14 WSM35G directly via Metav Werkzeuge or consult our specialists for application support. P26339R14 WSM35G milling indexable insert — Tiger·tec Gold coating, for rostfreier Stahl and superalloys (Walter Tools) P26339R14 WSM35G is a coated carbide milling insert engineered for demanding milling tasks in rostfreier Stahl and high‑temperature alloys, providing robust edge integrity and reliable chip formation in heavy‑duty operations Tiger·tec Gold coating for thermal resistance Optimised cutting‑edge stability for heavy cuts Suitable for rostfreier Stahl and superalloys Coated carbide for extended tool life Reliable grade for challenging materials and higher productivity The insert is part of the Tiger·tec Gold series and uses the WSM35G grade, a coated carbide designed specifically for materials that generate heat and stress at the cutting edge. Classified for ISO 513 groups M and S, it is suitable for rostfreier Stahl (M) and heat‑resistant superalloys and titanium (S). The coating acts as a thermal barrier and improves wear resistance, which in turn supports a stable cutting edge and more predictable tool life during extended cycles. These attributes combine to reduce unscheduled tool changes and support continuous, productive milling operations. Improved process security through stable chip formation and heat management The coating technology reduces adhesion at the cutting zone and supports consistent chip formation under adverse thermal conditions. As a result, the risk of built‑up edge is lowered and surface finish consistency improves, even when machining tough alloys. The stable edge behaviour of this insert promotes fewer reworks and a steadier production flow, translating into measurable gains in throughput and machine uptime. Where thermal load and edge strength are decisive, the Tiger·tec Gold technology provides a reliable compromise between wear resistance and toughness. Practical application guidance and selection benefits Selection should focus on matching insert geometry to the operation: roughing, semi‑finishing or finishing strategies call for appropriate chip load and entry angles. The P26339R14 WSM35G demonstrates particular strengths when secure chip evacuation and heat resistance are priorities, making it suitable for medium to heavy milling of rostfreier Stahl and difficult‑to‑cut superalloys. For complex or specialised setups, Metav Werkzeuge provides application advice and can recommend compatible tool holders and cutting parameters to maximise lifetime and process stability. Contact Metav Werkzeuge to discuss the suitability of the Tiger·tec Gold WSM35G insert for specific rostfreier Stahl applications and receive tailored tooling recommendations from our technical consultants Technical Data Article number: P26339R14-WSM35G-WALTER Designation: P26339R14 WSM35G Product type: Milling indexable insert Manufacturer: Walter Tools Core data Grade: WSM35G (coated carbide) Series: Tiger·tec Gold Applicable ISO groups: M, S Material group: S / M Special features Thermal resistant Tiger·tec Gold coating Optimised cutting‑edge stability Suitable for rostfreier Stahl and superalloys Designed for productive milling and reliable chip formation FAQ What materials is this insert intended for? The P26339R14 WSM35G insert is intended primarily for rostfreier Stahl (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), reflecting the grade’s emphasis on thermal stability and edge integrity. What substrate and coating does the insert use? This milling indexable insert uses a coated carbide substrate with the Tiger·tec Gold coating, combining wear resistance with toughness for demanding milling operations. Is the insert suitable for finishing operations? Depending on the chosen insert geometry and machine parameters, the WSM35G grade can be used in finishing where thermal stability and a stable cutting edge are required; selection of the correct geometry is essential for optimal results. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names are mentioned for clarification only and do not imply any affiliation between our company and those brands. The offered article is original, brand‑new goods of the manufacturer Walter Tools.
P26339R14 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of a PVD-coated, tough carbide grade that combines stable chip control and durable cutting edges for efficient milling. The insert’s versatility across Stahl, rostfreier Stahl and heat-resistant alloys supports consistent cycle times and reduced tool changes—order via Metav Werkzeuge or consult our specialists for process optimisation. P26339R14 WSP45G milling indexable insert (Tiger·tec Gold) by Walter Tools P26339R14 WSP45G is a PVD-coated milling insert designed for versatile milling tasks in steels, stainless steels and heat-resistant alloys Tiger·tec Gold PVD-coated grade WSP45G Tough PVD-coated carbide for milling Good chip control in Stahl and rostfreier Stahl Reliable cutting-edge stability for high feeds Increased productivity through stable cutting performance The Tiger·tec Gold grade WSP45G offers a combination of toughness and thermal resistance that translates into fewer tool changes and longer uninterrupted runs. Designed as a PVD-coated carbide insert, it supports stable chip formation and reduces edge build-up during high-material-removal-rate milling. For production environments where cycle time matters, the enhanced wear resistance helps maintain dimensional accuracy over longer lifetimes, contributing to a lower cost per part and steadier output quality. Broad material applicability with clear technical advantages Built for the ISO groups P / M / S, this insert is suitable for machining Stahl, rostfreier Stahl and heat-resistant superalloys including Titan. The chemistry and coating combination prioritises thermal stability and edge robustness, which is particularly beneficial when dealing with the poor heat conduction of superalloys. The grade supports reliable chip control and reduced adhesion, so operators inexperienced with advanced alloys can still achieve consistent surface finish and dimensional results. Process security and application recommendations for milling operations The geometry and coating technology of this insert focus on repeatable performance under demanding conditions. The result is predictable flank wear and a lower risk of sudden tool failure, improving overall process security. For face and shoulder milling at medium to high feeds, the grade delivers an effective balance between toughness and hardness. For specific cutting-data recommendations and optimisation of cutter body choice, Metav Werkzeuge’s technical consultants can provide tailored advice to align the insert’s capabilities with production goals. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and application support, or request a cutting-parameter consultation to integrate this grade into existing milling operations Technical Data Article number: P26339R14-WSP45G-WALTER SKU: P26339R14-WSP45G-WALTER Designation: P26339R14 WSP45G Product type: milling indexable insert Series: Tiger·tec Gold Facts Grade / Sort: WSP45G Material groups: P / M / S Suitable for Stahl machining: yes Suitable for rostfreier Stahl machining: yes Suitable for superalloys / Titan machining: yes Special features PVD-coated carbide technology Tough, versatile grade for milling applications Optimised for stable chip formation and edge life Designed for productive, repeatable machining FAQ What materials is this insert suitable for? The P26339R14 WSP45G insert from Walter Tools is designed for machining Stahl, rostfreier Stahl and heat-resistant superalloys including Titan, covering ISO groups P, M and S. How does Tiger·tec Gold WSP45G improve tool life? The Tiger·tec Gold coating and carbide substrate of the WSP45G grade provide thermal stability and wear resistance, which together reduce edge degradation and extend usable tool life in milling. Can this insert be used for high-feed milling? Yes; the design and coating of the P26339R14 WSP45G support high-feed and medium to heavy milling, offering cutting-edge stability and reliable chip control. Is the insert suitable for finishing and roughing operations? The Walter Tools WSP45G grade is versatile: it balances toughness and hardness so it can be used for both productive roughing and stable finishing in many applications. How to obtain cutting parameters for this grade? Metav Werkzeuge can supply recommended cutting data for the P26339R14 WSP45G insert tailored to the chosen cutter body and workpiece material to ensure optimal performance. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Walter Tools: Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns.
P26339R25 WKP35G WKP35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WKP35G grade for reliable milling of steel and cast iron; this insert delivers stable chip control, consistent edge life and the material coverage required for productive machining. Order the insert directly via Metav Werkzeuge or request advice from our consultants for process-matched recommendations. P26339R25 WKP35G indexable milling insert (Tiger·tec Gold) for steel and cast iron — Walter Tools The P26339R25 WKP35G is an indexable milling insert from the Tiger·tec Gold series, engineered to deliver productive cutting performance and dependable chip behaviour when machining steel and cast iron. Tiger·tec Gold coated carbide grade WKP35G Optimised for steel and cast iron (ISO P, K) Stable chip control and consistent edge life Suitable for productive milling operations Increased productivity through a coated carbide grade built for steel and cast iron The Tiger·tec Gold technology combines a wear-resistant coating with a hard substrate to produce an insert that balances tool life and cutting performance. The WKP35G grade is designed specifically for the thermal and mechanical demands of machining steel (ISO P) and cast iron (ISO K), which means fewer unplanned tool changes and steadier cycle times. In practical terms, this results in higher uptime on milling cutters and a more predictable process window for shops aiming to scale throughput without sacrificing surface integrity. Coating benefits explained: why surface protection matters A coated carbide insert acts as a thermal and chemical barrier at the cutting edge. The Tiger·tec Gold coating reduces abrasive and adhesive wear, leading to more consistent cutting edges over multiple passes. For operations that require repeatable finishes, this coating reduces flank wear growth and helps maintain dimensional accuracy. The combination of coating and substrate also improves resistance to the short, brittle chips typical of cast iron, so the insert preserves edge condition under interrupted cuts and varying feed rates. Stable chip control for fewer stoppages and improved cycle times Effective chip formation and evacuation are central to reliable milling. The geometry and grade work together to promote stable chip control, which reduces the risk of chip re-cutting and tool damage. This stability lowers the likelihood of machine stoppages and contributes directly to improved throughput. For production environments, the result is faster, more consistent component output and a reduction in scrap caused by irregular chip behaviour. Wide application range that simplifies tooling decisions The insert targets the two most common machining groups in metalworking: steel and cast iron, aligning with ISO 513 classifications P and K. That means one grade can cover multiple components and process steps, simplifying inventory and tool management. The insert’s specification makes it suitable for both semi-finishing and many finishing tasks, depending on cutter geometry and machining parameters, enabling flexible implementation across varied milling applications. Economic advantages through predictable cutting performance Predictability in tool life and process behaviour translates into economic benefits: fewer emergency tool changes, reduced scrap rates and better utilisation of machine time. The coated grade's resistance to wear supports longer tool life per edge, which in turn lowers tooling cost per part. Shops focused on lean production will find this grade contributes to stable output and easier scheduling, especially where mixed batches of steel and cast iron must be processed reliably. Practical guidance for selection and integration When integrating this indexable milling insert into existing tool setups, match insert geometry and cutter body to the intended operation and verify recommended feeds and speeds for the material class. For specification clarifications or process matching—such as setting optimal depths of cut or feeds for specific steel grades—consult Metav Werkzeuge; their technical advisors can provide application-oriented recommendations and supply the correct cutter–insert combinations for efficient implementation. Contact Metav Werkzeuge for tailored recommendations and fast supply of Walter Tools Tiger·tec Gold inserts to optimise machining of steel and cast iron Technical Data SKU: P26339R25-WKP35G-WALTER Product designation: P26339R25 WKP35G Product type: indexable milling insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Facts No core numerical characteristics provided in the source data Special features Material group designation: P / K Applicable materials: Steel (P), Cast iron (K) Coating / substrate: coated carbide (Tiger·tec Gold) Grade description: WKP35G is a Walter Tools coated carbide grade FAQ What materials is this insert suitable for? The P26339R25 WKP35G insert is specified for steel (ISO P) and cast iron (ISO K), covering the common alloy and grey/ductile cast iron families typically encountered in milling. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating enhances wear resistance and thermal stability, improving tool life and maintaining edge sharpness for longer periods under the thermal loads typical of steel and cast-iron machining. Is the grade suitable for finishing passes? Depending on cutter geometry and cutting parameters, the WKP35G grade can be used for semi-finishing and many finishing operations; process testing is recommended to confirm surface finish requirements with the chosen setup. How does chip control improve process reliability? The combined geometry and grade promote stable chip control, reducing instances of chip entanglement and re-cutting, which in turn lowers downtime and contributes to consistent cycle times. How can the insert be identified for reordering? Reorder using the designation P26339R25 WKP35G and reference the SKU P26339R25-WKP35G-WALTER to ensure the correct Tiger·tec Gold grade and geometry are supplied. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Walter Tools is a global brand of the Walter Group. Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanation only. There is no affiliation between our company and the mentioned brands. The offered article is an original, brand-new product from the manufacturer Walter Tools.
P26339R25 WKP35S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the WKP35S grade for extended edge life and reliable performance across steel and cast iron; order or request tailored application advice via Metav Werkzeuge to keep production running smoothly. P26339R25 WKP35S milling insert — Tiger‑tec Silver grade for steel & cast iron | Walter Tools The P26339R25 WKP35S is a coated carbide milling insert from the Tiger‑tec Silver series, engineered for productive milling of steel and cast iron with consistent edge stability and predictable wear behaviour. Tiger‑tec Silver coating for long tool life Optimised for steel and cast iron machining Coated carbide grade WKP35S Stable cutting edge for consistent results Increase machining throughput with a resilient coated grade The Tiger‑tec Silver WKP35S grade is a coated carbide solution developed to deliver extended tool life and reduced changeover frequency when milling unfavourable or mixed steels and cast irons. Its coating system improves wear resistance under the heat and friction typical for group P (steel) applications while offering abrasion control for group K (cast iron). For production environments this translates into fewer interruptions, lower tooling consumption and a more predictable process window. The description of the grade reflects a focus on practical machining benefits rather than abstract specification points. Reliable chip control and surface quality for mixed-material jobs Designed for the ISO groups P and K, this indexable milling plate manages the differing chip formation characteristics of steel and cast iron by balancing edge geometry with a protective coating. In steel, the grade copes with continuous chips and thermal loads; in cast iron it resists abrasive wear and handles short, brittle chips. The result is improved chip control and a reproducible surface finish with stable cutting forces. For engineers less familiar with cutting grades: the letter codes P and K indicate the intended workpiece families, not the insert material. Practical integration: selection, parameters and expected benefits As a standard indexable insert for milling cutters, the plate suits applications where productivity and repeatability are priorities. The coated design supports higher cutting speeds and longer intervals between regrinds, contributing to lower unit cost in series production. When specifying feeds and speeds, prioritise stable clamping and machine rigidity to exploit the edge stability of the grade; modest increases in cutting speed often yield the best balance of metal removal rate and insert life. For trial runs, document results to build reliable internal reference data for ongoing production. For tailored machining recommendations for the Walter Tools P26339R25 WKP35S and fast availability, contact Metav Werkzeuge GmbH for expert process advice and support Technical data Article number: P26339R25-WKP35S-WALTER Product type: Fräswendeschneidplatte ISO designation: P26339R25 WKP35S Grade: WKP35S Series: Tiger‑tec Silver Manufacturer: Walter Tools Core data Applicable ISO groups: P, K Material suitability: steel; cast iron Special features Coating technology: Tiger‑tec Silver Cutting material: coated carbide Optimised for typical steel heat and chip formation Stable cutting edge and broad material coverage FAQ What materials is this insert suitable for? The P26339R25 WKP35S insert is specified for ISO groups P and K, making it suitable for machining steel and cast iron. What does the Tiger‑tec Silver designation mean for performance? Tiger‑tec Silver indicates a multi-layer coating and substrate combination that enhances wear resistance and helps extend tool life for the WKP35S cutting grade. Is this insert compatible with standard milling cutters? The P26339R25 WKP35S is an indexable milling plate designed for use in conventional milling cutter bodies that accept this ISO designation; verify seat geometry before mounting. How does the WKP35S grade behave when switching between steel and cast iron? WKP35S balances thermal resistance for steel with abrasion tolerance for cast iron, providing predictable performance and reliable chip control across mixed-material production. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only and there is no affiliation between Metav Werkzeuge and the trademark holders. The offered article is original, factory-new goods of the manufacturer Walter Tools.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com