P26315R25 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold PVD coating, wide material compatibility and reliable edge life to increase milling productivity; order the P26315R25 WSP45G directly via Metav Werkzeuge or ask our consultants if needed. P26315R25 WSP45G indexable milling insert – Tiger‑tec Gold (Walter Tools) A P26315R25 WSP45G indexable milling insert engineered for versatile milling in steel, rostfreier Stahl and heat‑resistant superalloys Tiger‑tec Gold PVD coating for stable edges Suitable for steel, rostfreier Stahl and superalloys Versatile insert geometry for milling applications Consistent edge life and process security Productivity through proven coating and substrate The insert combines a PVD‑coated carbide substrate from the Tiger‑tec Gold series with a geometry optimised for milling. The PVD layer increases edge life and supports higher cutting speeds, which in turn improves throughput in batch production. For process planners, the clear result is fewer tool changes and a lower frequency of unplanned stoppages, delivering measurable gains in machining efficiency. The technical pairing of substrate and coating enables secure cutting in demanding operations while maintaining repeatable performance. Predictable chip control and better surface quality A stable cutting edge promotes repeatable chip formation and a high‑quality surface finish, essential for downstream processes. The insert’s design reduces the tendency for build‑up on the edge under typical milling conditions for steels and rostfreiem Stahl, which helps to maintain dimensional accuracy over longer runs. This behaviour supports tighter tolerances and reduces rework, making the component suitable for both prototype and production environments where consistency matters. Broad material range explained simply Marked for the ISO groups P / M / S, the grade addresses the most common machining needs: P for unalloyed and alloyed steel, M for rostfreier Stahl (stainless applications) and S for heat‑resistant superalloys and titanium. This classification means the insert is a practical choice when workshops require a single grade that covers multiple workpiece materials, reducing inventory complexity. The coating and substrate combination is tuned to cope with typical heat generation and wear mechanisms found across these material groups. Operational advantages for the shopfloor As an indexable insert, handling and replacement are straightforward, shortening downtime and simplifying tool logistics. The product’s compatibility with standard milling holders supports quick integration into existing toolsets. The overall effect is improved machine utilisation and a more predictable maintenance cadence, which benefits planning and cost control. For production managers seeking robust, repeatable milling performance, the design offers a balance of process security and economical operation. For application advice or to discuss suitability for specific machining tasks with Metav Werkzeuge, please contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a recommendation tailored to production needs Technical Data Article number: P26315R25-WSP45G-WALTER Designation: P26315R25 WSP45G Type: Fräswendeschneidplatte Series: Tiger‑tec Gold Grade: WSP45G Material designation: P / M / S Manufacturer: Walter Tools UID: P26315R25-WSP45G-WALTER Facts Designation code: P26315R25 SKU: P26315R25-WSP45G-WALTER Grade code: WSP45G Special features Coating: Tiger‑tec Gold (PVD) Substrate: coated carbide Material suitability: P / M / S (steel, rostfreier Stahl, superalloys/titanium) Application: milling / Fräsanwendungen Brand: Walter Tools FAQ What materials can this insert machine effectively? The P26315R25 WSP45G insert is specified for ISO groups P / M / S, meaning it is suitable for steel, rostfreier Stahl and heat‑resistant superalloys including titanium. How does the Tiger‑tec Gold coating improve machining? Tiger‑tec Gold’s PVD coating increases wear resistance and edge stability on the P26315R25 WSP45G, allowing higher cutting speeds and longer tool life in demanding milling operations. Is this insert suitable for high‑temperature alloys? Yes — the S classification indicates suitability for heat‑resistant superalloys and titanium; the coated carbide substrate supports thermal and mechanical loads encountered in such materials. Will the insert integrate with standard milling holders? The indexable format of the P26315R25 WSP45G is designed for compatibility with common milling toolholders, enabling straightforward replacement and reduced machine downtime. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen; The Walter AG (brand: Walter Tools) is part of the global toolmaking community and its products are mentioned for explanation only. Protected trademarks and trade names are the property of their respective owners. There is no connection between our company and the mentioned brands. The offered article is original, brand‑new goods from the manufacturer.
P26315R31 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and WKP25S grade for high process stability when machining steel and cast iron; order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. P26315R31 WKP25S milling insert (Tiger‑tec Silver) for steel and cast iron – Walter Tools A P26315R31 WKP25S milling insert engineered as a coated carbide solution for productive milling of steel and cast iron components. Tiger‑tec Silver coated carbide WKP25S grade for stable performance Suited to steel and cast iron machining Designed for productive milling Delivering consistent machining performance and longer tool life The combination of the Tiger‑tec Silver coating with the WKP25S formulation provides a balance of wear resistance and toughness that supports continuous milling cycles. As a coated carbide indexable insert, this solution is designed to withstand the thermal and mechanical loads typical of steel and cast‑iron cutting, reducing unplanned tool changes and keeping cycle times predictable. The specification P/K indicates suitability for both steel and cast iron, which simplifies tooling choices across mixed‑material production runs and helps to sustain a steady throughput on the shop floor. Better chip formation and steadier surface quality This grade is optimised for controlled chip behaviour in the P and K material classes, which in practice means fewer interrupted cuts and more stable chip evacuation. Improved chip control reduces the risk of built‑up edge and vibration, contributing to a more consistent surface quality and longer edge life per insert. For production environments where repeatability matters, the result is fewer workpiece rejects and a measurable rise in productivity through reduced secondary operations and rework. Easy specification and integration into standard machining processes Selection is straightforward thanks to the ISO classification and the clear material codes: ISO 513 groups P for steel and K for cast iron. The combination of a well‑documented series and grade enables quick matching with existing cutters and clamping systems; the insert is intended for conventional milling operations and fits common toolholders specified for this geometry. When geometry‑specific advice is required, Metav Werkzeuge or a technical consultant can recommend the correct cutter body and cutting parameters to exploit the insert grade fully, ensuring stable feeds and speeds without over‑stressing the cutting edge. Contact Metav Werkzeuge for tailored selection and delivery of Walter Tools Tiger‑tec Silver inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: P26315R31-WKP25S-WALTER SKU: P26315R31-WKP25S-WALTER Item: Fräswendeschneidplatte (milling insert) Brand: Walter Tools Core data Designation: P26315R31 WKP25S Grade: WKP25S Series: Tiger‑tec Silver Numerical machining parameters: not provided Special features Coating: Tiger‑tec Silver (coated carbide) Material code: P / K Suitable for: Steel (P) Suitable for: Cast iron (K) FAQ What materials is this insert suitable for? The P26315R31 WKP25S milling insert by Walter Tools is specified for steel (P) and cast iron (K) applications according to ISO classifications. How does the Tiger‑tec Silver coating improve performance? The Tiger‑tec Silver coating on the WKP25S grade increases wear resistance and thermal stability, helping the insert maintain its cutting edge longer under typical milling loads. Can this insert be used in finish milling? Yes, the coated carbide design and the WKP25S formulation support stable cutting and good surface results; selection of cutter geometry and parameters will determine the achievable finish. Is the insert compatible with standard cutter bodies? The insert designation P26315R31 WKP25S corresponds to a common indexable geometry; compatibility depends on the cutter body pocket and clamping system used. What should be expected regarding chip control? WKP25S is formulated to handle the chip formation characteristics of both steel and cast iron, offering improved chip control and reduced risk of disruptive built‑up edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory‑new product from Walter Tools.
P26315R31 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver coating and the WKP35S carbide grade for improved wear resistance and reliable machining of Stahl and Gusseisen; order directly via Metav Werkzeuge or request advice from our specialists. P26315R31 WKP35S – Milling indexable insert, Tiger‑tec Silver coating, for Stahl and Gusseisen | Walter Tools The P26315R31 WKP35S is a precision milling indexable insert designed for productive metalcutting in general milling applications on Stahl and Gusseisen. Tiger‑tec Silver coating for enhanced wear resistance Optimised for Stahl and Gusseisen machining Coated carbide grade WKP35S for stable edge life Reliable chip control for consistent productivity Extended tool life through advanced coating The combination of a Tiger‑tec Silver coating and a coated carbide substrate delivers measurable improvements in wear resistance and cutting-edge stability. The coating reduces abrasive wear and friction at the cutting edge, which allows for optimised cutting parameters and longer intervals between indexings. For industrial milling applications this means fewer tool changes and a more continuous production flow, supporting higher throughput without compromising component quality. Reliable performance across Stahl and Gusseisen Designed for the P and K ISO groups as defined in ISO 513, this insert is suited to typical heat and chip formation characteristics encountered when machining Stahl (unalloyed and alloyed) and Gusseisen. The WKP35S grade is a coated cemented carbide that balances toughness and hardness to resist both abrasion from cast materials and thermal loads from steel cutting. This targeted material coverage ensures predictable performance across mixed-production batches where both material types appear. Process stability and predictable chip control The insert geometry and coating synergy support consistent chip control and a stable cutting edge, resulting in reproducible surface finish and dimensional consistency. In series production, these attributes reduce scrap rates and contribute to a reliable machining cycle time. The product is engineered for process security and repeatable results, making it suitable for workshops and production lines seeking steady productivity and fewer unplanned interruptions. Contact Metav Werkzeuge today for tailored technical advice and prompt availability of Walter Tools P26315R31 WKP35S milling inserts Technical data Article number: P26315R31-WKP35S-WALTER SKU: P26315R31-WKP35S-WALTER Product: Milling indexable insert Brand: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Designation: P26315R31 WKP35S Core data ISO suitability: ISO 513 (P, K) Material classification: P / K Special features Coated cemented carbide Suitable for Stahl machining Suitable for Gusseisen machining Series-specific coating technology: Tiger‑tec Silver Indexable insert for milling applications FAQ Which materials can this insert machine effectively? The P26315R31 WKP35S insert from Walter Tools is specified for machining Stahl and Gusseisen, corresponding to the P and K groups under ISO 513. What coating is applied to the insert and what does it provide? The insert uses the Tiger‑tec Silver coating, which enhances wear resistance, lowers friction at the cutting zone and supports higher cutting speeds with stable tool life. How does the WKP35S grade benefit production runs? WKP35S is a coated carbide grade engineered for a balance of toughness and abrasion resistance, offering stable edge life and predictable performance across batch production. Is the insert suitable for rostfreier Stahl or hardened steels? No specific suitability for rostfreier Stahl or hardened steels is indicated for this grade; the product data document suitability for Stahl and Gusseisen only. Can this insert improve process security in mixed-material operations? Yes, the combination of coating and grade is intended to provide consistent chip control and repeatable results when alternating between Stahl and Gusseisen workpieces. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the named brands. The offered article is an original, brand-new product of the manufacturer.
P26315R31 WPP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the WPP35G grade for longer tool life and more stable chip control; the result is improved process reliability and productive machining of Stahl. Order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific recommendations. Fräswendeschneidplatte P26315R31 WPP35G – coated carbide insert for Stahl machining (Walter Tools) A Fräswendeschneidplatte engineered for secure, repeatable metal removal in the machining of Stahl, featuring the Tiger·tec Gold coating and the WPP35G grade for high wear resistance. Tiger·tec Gold coated carbide grade WPP35G Optimised chip control for Stahl machining High wear resistance and edge stability Designed for universal and tougher Stahl applications Reliable machining performance for Stahl operations The combination of the Tiger·tec Gold coating and the WPP35G grade yields a coated carbide composition tailored to the thermal and mechanical demands of Stahl cutting. The coating reduces friction at the cutting edge and enhances resistance to abrasive wear; the substrate provides the toughness required for intermittent and continuous cuts. This balance results in longer edge life and fewer insert changes, contributing to higher uptime in milling operations. For production environments requiring steady cycle times, the insert supports process stability and consistent surface quality. Predictable chip formation and process stability Optimised geometry and the material characteristics of the grade promote controlled chip formation, which simplifies chip evacuation and reduces the risk of re-cutting. Stable chip behaviour lowers tool-related interruptions and helps maintain cutting forces within predictable ranges, improving spindle and fixture load management. For manufacturers processing batches of unalloyed or alloyed Stahl, this predictability supports more efficient parameter selection and reduces the need for frequent trial cuts. Practical benefits for shop-floor productivity By combining wear resistance and toughness, the insert offers a pragmatic productivity advantage: fewer indexings and less downtime for insert replacement. The WPP35G grade is versatile across a wide range of Stahl conditions, classified for applications where a compromise between wear resistance and toughness is required. Machine shops benefit from reduced tool consumption and improved repeatability, which in turn supports tighter scheduling, lower tooling logistics overhead and steadier component quality. Selection guidance and application notes When specifying this type of insert, consider the workpiece condition and machining strategy: the grade is optimised for typical Stahl heat and chip patterns and suits both roughing and semi-finishing operations where a robust cutting edge is advantageous. Although specific cutting data depend on machine rigidity and clamping, the insert’s Tiger·tec Gold coating allows slightly more aggressive cutting parameters compared with uncoated carbide of similar geometry, while maintaining surface finish and tool life targets. For tailored feed and speed recommendations, consult process engineering or the product advisors at Metav Werkzeuge. Contact Metav Werkzeuge for tailored milling recommendations and to discuss how Walter Tools inserts can improve cycle times and tool costs Technical data Article number: P26315R31-WPP35G-WALTER Designation: P26315R31 WPP35G Product type: Indexable milling insert (Fräswendeschneidplatte) Manufacturer: Walter Tools Core specifications No numerical specifications provided in the data set Special features Series: Tiger·tec Gold Grade: WPP35G Material class: P (Stahl) Coating type: coated cemented carbide Typical application: machining of Stahl FAQ What workpiece materials is this insert designed for? This insert is specified for the P workpiece group; the P26315R31 WPP35G insert from Walter Tools is intended primarily for machining Stahl such as unalloyed and alloyed steels. What advantages does the Tiger·tec Gold technology provide? Tiger·tec Gold provides reduced friction at the cutting edge and improved wear resistance; the technology used on the P26315R31 WPP35G insert helps extend tool life and supports more consistent cutting conditions. Can the insert be used for stainless materials? Stainless processing is not indicated in the provided data; the P26315R31 WPP35G grade is optimised for Stahl and suitability for rostfreier Stahl would require confirmation from technical data sheets or an application test. How does the WPP35G grade balance wear resistance and toughness? WPP35G is formulated as a coated cemented carbide grade that balances abrasive wear resistance with sufficient toughness for productive machining, making it suitable for both robust roughing and controlled semi-finishing cuts in Stahl. Is there guidance for cutting parameters? Specific cutting values depend on machine and clamping conditions; the combination of the Tiger·tec Gold coating and the WPP35G grade typically allows for conservative increases in cutting speed and feed compared with older uncoated grades—Metav Werkzeuge can advise on optimised parameters. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of Walter Deutschland GmbH. Protected trademarks and trade names remain the property of their respective owners. Brand names are used solely for descriptive purposes and imply no affiliation between our company and the trademark holders.
P26315R31 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile P / M / S machinability and a stable, heat-resistant cutting edge for efficient, predictable milling results; order the insert directly via Metav Werkzeuge or consult our application specialists for process support. P26315R31 WSP45G Fräswendeschneidplatte – Tiger·tec Gold PVD, P / M / S machining (Walter Tools) The P26315R31 WSP45G is a coated carbide milling insert designed for versatile milling of Stahl, rostfreier Stahl and heat-resistant alloys in demanding production environments. Tiger·tec Gold PVD coating Suitable for P / M / S applications Heat-resistant, stable cutting edge Consistent chip control and surface finish Reliable performance across steel, stainless steel and superalloys The combination of a PVD-coated substrate and the WSP45G grade provides a balance of toughness and wear resistance tailored for milling. This indexable insert supports machining of unalloyed and alloyed Stahl, difficult-to-machine rostfreier Stahl and temperature-sensitive superalloys, by maintaining a stable cutting edge under thermal stress. The result is reduced risk of chipping and improved process reliability, which translates into fewer tool changes and more consistent component quality. Higher productivity through controlled chip formation The insert’s substrate and coating chemistry are optimised for predictable chip control during interrupted and continuous milling. Controlled chips reduce downtime from chip entanglement and aid coolant flow, enhancing removal rates on high-volume runs. As a result, cycle times can be shortened without sacrificing surface finish. The design supports productive milling strategies that focus on throughput and reproducible part tolerances, making the insert a practical choice for job shops and series production alike. Process security and surface quality for critical components By combining wear resistance with edge stability, the insert helps to achieve consistent surface finishes and dimensional accuracy. The engineered grade resists edge rounding even under elevated temperatures, enabling tighter tolerances and reducing finishing operations. For applications where component integrity matters—such as aerospace or energy sectors—this leads to fewer rejected parts and a more predictable production flow. The performance of the cutting grade supports repeatable results across batches. Application guidance and integration into machining routines The insert is compatible with standard milling toolholders and adapts well to established cutting data ranges for P / M / S groups. When integrating into a process, attention to appropriate speeds and feeds and the use of suitable coolant strategies will exploit the Tiger·tec Gold benefits fully. For customers seeking process optimisation, targeted trial cuts and parameter tuning often reveal immediate efficiency gains; such steps typically pay off in longer tool life and fewer process interruptions. Contact Metav Werkzeuge for tailored application advice on Walter Tools' Tiger·tec Gold inserts — call +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitable grades and clamping solutions Technical data SKU: P26315R31-WSP45G-WALTER Article designation: P26315R31 WSP45G Product type: Fräswendeschneidplatte Facts Series: Tiger·tec Gold Grade: WSP45G Material/coating: coated carbide (PVD) ISO designation: P26315R31 WSP45G Special features Material applicability: P (Stahl), M (rostfreier Stahl), S (superalloys /Titan) Design: indexable milling insert for versatile milling applications Performance traits: wear-resistant coating, tough substrate, stable cutting edge Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P26315R31 WSP45G Fräswendeschneidplatte (Walter Tools) is specified for machining P, M and S groups — meaning Stahl, rostfreier Stahl and heat-resistant superalloys. How does the Tiger·tec Gold coating benefit milling operations? The Tiger·tec Gold coating on this cutting grade improves wear resistance and thermal stability, enabling longer tool life and more consistent surface finishes in milling applications. Can this insert be used in standard milling toolholders? Yes. The design of this insert is compatible with conventional milling holders for indexable inserts; correct clamping and recommended cutting data ensure stable performance. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26325R31 WKP25S WKP25S Wendeplatten - Walter Tools
Taking advantage of the Tiger·tec Silver technology and the WKP25S coated carbide grade delivers a balanced combination of high process reliability and extended wear resistance for steel and cast iron machining; order directly via Metav Werkzeuge or request detailed advice from the consultants. P26325R31 WKP25S milling indexable insert – Tiger·tec Silver coating, for steel and cast iron (Walter Tools) A P26325R31 WKP25S milling indexable insert engineered for productive face and peripheral milling of steel and cast iron, optimised for consistent chip control and long tool life Tiger·tec Silver coating for robust performance Coated carbide grade WKP25S optimised for P and K Suitable for steel and cast iron machining Designed for stable chip formation and wear resistance Dependable performance where material variability is a challenge The Tiger·tec Silver series combines a wear-resistant coating with a carefully tuned substrate to maintain cutting-edge integrity under varied conditions. For operations that switch between finishing and semi-finishing, the WKP25S grade offers wear resistance and thermal stability that reduce unexpected tool changes. This results in fewer process interruptions and a more predictable production flow, contributing directly to higher uptime and consistent component quality. Coating and grade explained for improved process security The designation indicates a coated carbide insert: the surface treatment from the Tiger·tec Silver family protects the cutting edge against abrasive wear and heat, while the substrate sustains mechanical strength. Coating systems like this are engineered to delay flank and crater wear, which in turn preserves dimensional accuracy on machined parts. For shops seeking repeatable results when machining steel (ISO group P) and cast iron (ISO group K), this technical combination increases the window of optimal cutting parameters. Operational benefits: productivity through chip control and stability Stable chip formation is essential for safe, automated milling. The insert’s micro-geometry and the WKP25S grade promote favourable chip behaviour when machining both ductile steels and more brittle cast iron, reducing the risk of long, entangling swarf or unpredictable fractures. The resulting improvements in chip control and edge life support higher average metal removal rates and lower rework — a direct contribution to shop-floor productivity and efficiency. Practical selection guidance for integration into tool systems The ISO designation P26325R31 WKP25S identifies the insert geometry and grade for matching toolholders and cutter bodies. When selecting an insert for an application, match the grade and geometry to the cutter’s clamping system and the intended machining strategy; consider whether the operation emphasises surface finish or material removal rate. For mixed-production environments, choosing a grade tailored to both P and K groups simplifies inventory and reduces set-up complexity while maintaining reliable cutting performance. For reliable, productive machining with Walter Tools' Tiger·tec Silver grade, contact Metav Werkzeuge for technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P26325R31-WKP25S-WALTER Designation: P26325R31 WKP25S Type: milling indexable insert Series: Tiger·tec Silver Grade: WKP25S Applicable material groups: P (steel), K (cast iron) Manufacturer: Walter Tools Facts ISO designation: P26325R31 WKP25S SKU: P26325R31-WKP25S-WALTER Special features Coating: Tiger·tec Silver Material/grade: coated carbide WKP25S Application: machining of steel and cast iron Benefits: stable chip formation, extended wear resistance, high process reliability Series characteristics: designed for productive milling FAQ What materials is this insert suitable for? The P26325R31 WKP25S milling indexable insert from Walter Tools is suitable for ISO material groups P and K, meaning it is intended for machining steel and cast iron. What advantages does the Tiger·tec Silver coating provide? Tiger·tec Silver offers improved thermal and abrasive wear resistance and supports a longer edge life compared with uncoated grades, helping to maintain part accuracy and reduce changeover frequency. Which cutter holders are compatible with this insert? Compatibility depends on the cutter body and the insert pocket geometry; the P26325R31 form factor requires milling cutters designed to accept that ISO-style insert dimension and clamping method. How does the WKP25S grade differ from other carbide grades? WKP25S is a coated carbide grade optimised for a balance between wear resistance and toughness, aimed at reliable performance across both steel and cast iron applications within the Tiger·tec Silver family. Is this insert suitable for high-performance or automated machining? The combination of coated surface and robust substrate makes the insert appropriate for demanding production tasks; suitability for a specific high-speed or automated application depends on machine capability and cutting strategy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and brand names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any affiliation between our company and the named brands. The offered article is original, factory-new goods of the manufacturer.
P26325R31 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, coated carbide technology and suitability for both steel and cast iron to maintain stable, productive milling cycles; order the insert directly via Metav Werkzeuge or consult the specialists for application-specific recommendations. P26325R31 WKP35S — Indexable milling insert, Tiger·tec Silver, for steel & cast iron — Walter Tools The P26325R31 WKP35S is an indexable milling insert engineered for high-productivity finishing and roughing operations on steel and cast iron, featuring the Tiger·tec Silver coating technology for reliable cutting performance Tiger·tec Silver coated carbide grade WKP35S Optimised for steel (P) and cast iron (K) High wear resistance and reliable edge life Consistent performance for productive milling Stable results when machining steel and cast iron The insert’s Tiger·tec Silver coating and coated carbide substrate provide a balance between hardness and toughness that is particularly suited to the thermal and mechanical demands of machining steel (ISO group P) and cast iron (ISO group K). This combination enables predictable chip formation and reduces flank wear under variable cutting conditions. As a result, the component surface quality is more consistent and tool-change intervals can be planned rather than forced by premature edge breakdown. The design supports both roughing inserts and finishing passes where process stability and repeatability are decisive. Fewer interruptions thanks to extended edge life and chip control With a focus on process efficiency, the grade delivers measurable improvements in wear resistance and edge life, reducing downtime for re-grinding or replacement. The coating technology enhances heat resistance and helps maintain a sharp cutting geometry for longer, which in turn supports improved chip control and lowers the risk of built-up edge. For production environments aiming to raise throughput without sacrificing component tolerances, these characteristics translate into fewer unplanned stops and a steadier production output. Practical integration for productive toolrooms As an indexable insert compatible with standard milling bodies, the P26325R31 WKP35S fits directly into common cutter systems and is straightforward to replace and re-index. The combination of the Tiger·tec Silver series and the WKP35S grade gives shops a versatile option for mixed batches where both steel and cast iron workpieces are present. Specifying this insert in tool lists supports predictable tool procurement and helps streamline stocking policies in maintenance and production. For applications requiring tailored cutting data, the insert’s geometry and coating characteristics allow straightforward optimisation of speeds and feeds to balance tool life and cycle times. For reliable, high-productivity milling with Walter Tools’ Tiger·tec Silver grade, consult Metav Werkzeuge for tailored recommendations and fast order processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P26325R31-WKP35S-WALTER Designation: P26325R31 WKP35S Manufacturer: Walter Tools Series: Tiger·tec Silver Core data ISO material groups: P (steel), K (cast iron) Material classification: P / K Coating: coated carbide Special features Grade: WKP35S Optimised for heat and chip behaviour in steel and cast iron Balanced hardness and toughness for versatile milling Suitable for high-productivity machining operations FAQ Which materials is this insert suitable for? The P26325R31 WKP35S insert is optimised for steel (ISO group P) and cast iron (ISO group K), reflecting the intended application spectrum of the Tiger·tec Silver grade. What makes the Tiger·tec Silver technology beneficial? Tiger·tec Silver provides an improved balance of thermal resistance and toughness so that the coated carbide insert sustains a sharper edge for longer under the higher temperatures typical of steel machining. Can the insert be used for finishing and roughing? Yes, the combination of geometry and the WKP35S grade supports both productive roughing passes and controlled finishing, offering flexibility for mixed production runs. How does the insert improve process stability? Enhanced wear resistance and consistent chip formation reduce the incidence of unexpected edge failure, contributing to steadier cycle times and more predictable maintenance intervals. Is the P26325R31 WKP35S compatible with standard milling cutters? The insert is an indexable milling insert designed to fit into common cutter bodies; cutter compatibility depends on the specific pocket and clamping system, so matching the insert designation with the cutter specification is recommended. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new merchandise of the manufacturer.
P26325R31 WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Gold coating and the WPP35G coated‑carbide grade to achieve consistent, productive milling of steel components; the insert’s design supports stable chip formation and reliable edge life, helping to maintain steady cycle times. Order the insert directly via Metav Werkzeuge or consult their specialists for application guidance. P26325R31 WPP35G Fräswendeschneidplatte (milling insert) – Tiger‑tec Gold for steel, Walter Tools P26325R31 WPP35G is a coated‑carbide milling insert developed for efficient machining of steel under the ISO P classification, offering a balance of wear resistance and toughness for industrial milling applications Tiger‑tec Gold coating Coated carbide grade WPP35G Optimised for steel machining Consistent chip formation Higher throughput when machining steel with a coated carbide grade The combination of Tiger‑tec Gold coating and a WPP35G grade provides a durable cutting edge engineered for the thermal and chip‑forming conditions typical of steel machining. Coated carbide means a hard substrate with a thin, engineered coating that reduces flank wear and improves resistance to abrasive and adhesive wear. The result is fewer insert changes, more predictable tool life and reduced unscheduled downtime — advantages that translate directly into improved throughput and lower process variation for production environments. More stable chip control and process security Designed for the ISO P material group, this insert supports stable chip formation in a wide range of steel alloys. Stable chips reduce the risk of tool damage and machine stoppages, while promoting consistent surface finish and dimensional repeatability. For operations that demand repeatable results, the insert’s coating technology helps maintain a protected cutting edge at elevated temperatures, so machining parameters can be exploited more aggressively while keeping process security high. Practical compatibility and economical handling As an indexable milling insert, the geometry and grade selection aim to simplify tooling logistics: replacement of worn inserts is faster than regrinding monolithic cutters, and consistent grades such as WPP35G make grade allocation straightforward across typical steel machining tasks. The insert’s suitability for a broad range of steel types supports flexible production planning and reduces the need for multiple, dedicated tooling stocks. For machining centres and toolrooms seeking reliable performance with straightforward inventory handling, this insert offers a technically clear and economical option. For robust, predictable steel milling choose the Walter Tools Tiger‑tec Gold insert — contact Metav Werkzeuge for availability and tailored application advice via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number / SKU: P26325R31-WPP35G-WALTER Product type: Fräswendeschneidplatte (milling insert) ISO designation: P26325R31 WPP35G Brand: Walter Tools Facts Material group: ISO P (steel) Grade family: WPP35G Series: Tiger‑tec Gold Substrate: coated carbide Sorteneinsatz numbers: 10 / 20 / 30/35 Special features Coating technology: Tiger‑tec Gold Grade: WPP35G (coated carbide) Intended application: machining of steel (ISO P) Focus: wear resistance and toughness balance for productive milling FAQ Which materials is this insert designed for? The P26325R31 WPP35G milling insert from Walter Tools is specified for the ISO P material group and is therefore intended primarily for machining steel. What coating and substrate are used on this insert? This indexable insert uses the Tiger‑tec Gold coating applied to a coated‑carbide substrate; the grade is WPP35G, optimised for the thermal and chip‑forming behaviour encountered in steel milling. Is the insert suitable for stainless steel or other alloys? The documented designation indicates suitability for steel under ISO P; there is no explicit data provided for stainless steel or other specialised alloys in the supplied information. How does the WPP35G grade affect tool life and performance? The WPP35G grade provides a compromise of wear resistance and toughness appropriate for many steel applications, helping to extend edge life while maintaining process stability in milling operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade designations are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer Walter Tools.
P26325R31 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Gold coating and the WSP45G grade for robust, versatile milling of steel, stainless steel and heat‑resistant alloys; this results in stable chip formation and longer tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for process-specific advice. P26325R31 WSP45G Fräswendeschneidplatte — Tiger·tec Gold, versatile P/M/S grade (Walter Tools) P26325R31 WSP45G is a coated carbide milling insert designed for demanding milling applications across several material groups Tiger·tec Gold coating for extended tool life WSP45G grade for P / M / S applications Coated cemented carbide for stable cutting edge Suitable for steel, stainless steel and superalloys Increased productivity through advanced coating technology The Tiger·tec Gold system combines a robust PVD coating with a wear‑resistant substrate to deliver consistent performance in milling operations. This coating reduces flank and crater wear, which translates directly into longer tool life and fewer insert changes — a clear efficiency gain for batch and continuous production. Coated cemented carbide inserts are optimised to withstand the thermal loads typical of steel machining, so operators benefit from stable chip formation and reliable surface finishes even under variable cutting conditions. Secure machining of demanding material groups The WSP45G grade is formulated for the ISO groups P, M and S, meaning it covers unalloyed/alloyed steel, rostfreier Stahl and heat‑resistant superalloys including titanium. For materials that tend to work‑harden or generate high temperatures at the cutting zone, the grade’s balance of toughness and wear resistance helps prevent edge chipping and built‑up edge formation. In practice, this yields fewer rejects and a more predictable tool life, supporting process stability and repeatable part quality. Practical benefits for shop‑floor integration As a milling insert from a proven series, the P26325R31 WSP45G supports a wide range of finishing and roughing strategies by offering a dependable cutting edge and consistent geometry. The result is reduced downtime for tool changes and more predictable programming windows for CAM setups. If further process advice is required, Metav Werkzeuge provides application support and can help select the correct insert geometry and cutting data to match the specific holder and machine dynamics, ensuring optimal performance and surface integrity. For precision milling with Walter Tools' Tiger·tec Gold grade, contact Metav Werkzeuge for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P26325R31-WSP45G-WALTER SKU: P26325R31-WSP45G-WALTER Manufacturer: Walter Tools Product type: Fräswendeschneidplatte Grade designation: WSP45G Series: Tiger‑tec Gold Material groups: P / M / S UID: P26325R31-WSP45G-WALTER Facts Coating type: PVD (Tiger·tec Gold) Substrate: coated cemented carbide Applicable materials: steel, rostfreier Stahl, superalloys / titanium Suitable machining types: milling Special features Balanced toughness and wear resistance Designed for stable chip formation Optimised for varied milling strategies Supports improved process reliability FAQ What materials is this insert suitable for? The P26325R31 WSP45G is suitable for machining steel, rostfreier Stahl and heat‑resistant superalloys (ISO groups P, M and S) thanks to its WSP45G grade and Tiger·tec Gold coating. How does the Tiger·tec Gold coating improve performance? The Tiger·tec Gold PVD coating on the insert reduces wear and helps maintain a stable cutting edge under thermal stress, which extends insert life and improves consistency in milling operations. Can this insert be used for both finishing and roughing? Yes, the coated cemented carbide composition and balanced toughness of this grade allow it to be applied across finishing and roughing milling strategies, depending on cutting data and toolholder setup. Where can technical support for process selection be obtained? Metav Werkzeuge offers application advice for optimising cutting data and insert selection; contact info@metav-werkzeuge.com or call +49 2822 7131930 for guidance. Manufacturer: Walter AG (brand: Walter Tools); Head office: Tübingen, Germany; Part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand‑new merchandise from the manufacturer.
P26335R10 WKP35G WKP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and coated cemented carbide substrate for extended tool life and reliable chip control when machining Stahl and Gusseisen; order genuine Walter Tools inserts via Metav Werkzeuge or request application advice from their specialists. P26335R10 WKP35G milling indexable insert – Tiger·tec Gold, for Stahl and Gusseisen (Walter Tools) P26335R10 WKP35G is a Tiger·tec Gold-coated milling indexable insert designed for productive roughing and finishing in mixed-production environments, particularly where Stahl and Gusseisen are processed Tiger·tec Gold coated for long tool life Optimised for milling Stahl and Gusseisen Coated cemented carbide for wear resistance Consistent cutting-edge stability High productivity through coating and substrate synergy The Tiger·tec Gold series combines a coated cemented carbide substrate with an optimised surface treatment to deliver consistent wear resistance and thermal stability. This results in fewer insert changes and longer uninterrupted machining cycles. For industrial production, this means higher machine utilisation and a measurable reduction in process downtime. The coating technology improves resistance to abrasive wear typical for Gusseisen while also helping to manage the heat and built-up edge formation encountered when cutting Stahl. Predictable chip behaviour and process reliability Built for the ISO P/K application classes, the geometry and material pairing promote controlled chip formation during milling operations. The insert’s substrate and coating work together to reduce catastrophic edge failure and produce short, manageable chips in Gusseisen and stable chips when machining Stahl. This predictability reduces unexpected rejects and supports stable cycle times — a decisive advantage for batch production and mixed-material machining. Efficient integration into existing tool systems The insert designation and format match common milling toolholders and clamping systems used in metalworking shops, enabling quick replacement without major setup changes. The standardised ISO-type naming simplifies ordering and inventory management, while the coated carbide construction requires no special handling beyond normal toolcare. As a result, toolroom logistics remain straightforward and the transition to Tiger·tec Gold inserts can be implemented with minimal disruption to established workflows. Benefits for surface finish and tool life The combination of substrate hardness and coating adhesion yields a good compromise between edge strength and toughness, which supports improved surface quality on a range of component geometries. For finishing passes on Stahl, the coating helps maintain a sharp cutting edge longer; for interrupted or abrasive cuts in Gusseisen, the same technology increases resistance to chipping. The outcome is fewer reworks and a more consistent final surface finish across production batches. For applications demanding steady high productivity and reliable edge life, specify Walter Tools Tiger·tec Gold inserts via Metav Werkzeuge and consult their application specialists for optimal cut data and toolholder pairing. Technical data Article number: P26335R10-WKP35G-WALTER Name: Fräswendeschneidplatte P26335R10 WKP35G Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WKP35G Material group: P / K SKU/UID: P26335R10-WKP35G-WALTER Facts ISO designation: P26335R10 WKP35G UID: P26335R10-WKP35G-WALTER Series name: Tiger·tec Gold Special features Coated cemented carbide substrate Designed for machining Stahl Suitable for machining Gusseisen Optimised for controlled chip formation FAQ What materials is this insert suitable for? The P26335R10 WKP35G insert is designed primarily for machining Stahl and Gusseisen under ISO P/K classifications. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold enhances wear resistance and thermal management on the coated cemented carbide substrate, which helps extend tool life and maintain cutting-edge stability in both Stahl and Gusseisen applications. Is the insert compatible with standard milling holders? The insert’s ISO-style designation matches common milling indexable insert systems, allowing straightforward integration into existing holders and clamping devices. Will this insert improve surface finish on finishing passes? Yes; the combination of a robust substrate and a high-performance coating supports a sharper, more durable edge that contributes to a consistent surface finish on Stahl components. Can the insert handle intermittent cuts in abrasive materials? The coated carbide grade WKP35G is formulated to resist chipping and abrasive wear, making it suitable for interrupted cuts, particularly in Gusseisen. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26335R10 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, a wear-resistant coated carbide grade and robust chip control for consistent productivity; order directly via Metav Werkzeuge or consult the technical team for application advice. P26335R10 WKP35S milling insert — Walter Tools, Tiger·tec Silver, for steel and cast iron P26335R10 WKP35S is a coated carbide milling insert designed for productive machining of steel (ISO group P) and grey or nodular cast iron (ISO group K). Tiger·tec Silver coating for improved wear resistance Optimised for steel and cast iron machining Coated carbide grade WKP35S for long tool life Stable chip formation and high process reliability Reliable performance where high material removal and surface quality meet The Tiger·tec Silver coating combined with a coated carbide substrate delivers a balance of wear resistance and thermal stability, which translates into high process safety and longer intervals between tool changes. For machining workpieces in the ISO P (steel) and K (cast iron) groups, this insert supports stable operations under the heat and abrasion typical of these materials. The result is a measurable improvement in productivity and a reduction in unplanned downtime, because tool life is extended and cutting-edge stability is preserved. Clear advantages in chip control and surface finish Thanks to its grade and geometry, the insert promotes stable chip formation, which reduces the risk of built-up edge and inconsistent surface results. Stable chips lower the need for manual intervention and protect the workpiece from thermal and mechanical damage, improving repeatability across batches. For users less familiar with metalcutting terms: a coating like Tiger·tec Silver is a multi-layer surface treatment that reduces friction and wear, while a coated carbide base provides toughness to resist fracture — together these elements help achieve a consistent surface finish with fewer rejects. Practical application and selection guidance for process planners The WKP35S grade is targeted at general-purpose milling in steels and cast irons, offering a good compromise between wear resistance and edge robustness. When integrated into a machining cell, this insert supports industrial workflows that prioritise throughput and component quality. Process planners can expect improved life under typical cutting conditions for P and K materials; the insert’s behaviour under load makes it suitable for operations where thermal loads and abrasive wear must be controlled. For customers requiring confirmation of suitability for a specific geometry or work material, process trials are recommended to validate cutting parameters and fixture interaction. Contact Metav Werkzeuge for tailored cutting data and to order Walter Tools Tiger·tec Silver inserts with confidence Technical data SKU: P26335R10-WKP35S-WALTER Article designation: P26335R10 WKP35S Manufacturer: Walter Tools Product type: Milling insert (indexable) Series: Tiger·tec Silver Grade: WKP35S Materials: Steel (P) / Cast iron (K) Core specifications ISO material groups: P, K Coating: Tiger·tec Silver Substrate: Coated carbide Intended application: Milling for general steel and cast iron machining Features and application Wear-resistant coating technology Robust cutting edge for productive machining Optimised for stable chip formation Broad coverage of steel and cast iron applications Designed for consistent tool life and process reliability FAQ What materials is this insert suitable for? The P26335R10 WKP35S milling insert from Walter Tools is suited for ISO P (steel) and K (cast iron) applications and is designed to handle the thermal and abrasive demands of these material groups. What is the benefit of the Tiger·tec Silver coating? The Tiger·tec Silver coating on the WKP35S grade reduces friction and improves wear resistance, which enhances tool life and contributes to consistent machining performance with the Walter Tools milling insert SKU P26335R10-WKP35S-WALTER. How does the insert support chip control? The grade and cutting geometry promote stable chip formation, reducing the risk of broken chips and built-up edge; this leads to safer, more predictable milling cycles with fewer interruptions. Is this insert suitable for high-volume production? Yes. The wear-resistant coated carbide composition and optimised grade make the insert appropriate for productive, repeatable machining in series production where tool life and surface quality are priorities. Can the insert be used for finishing passes? While primarily optimised for productive roughing and semi-finishing in P and K materials, the stable cutting edge and coating characteristics can support finishing operations when cutting parameters are adapted accordingly. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is part of a group of precision tool manufacturers with a strong reputation for process reliability and consistent results. Protected trademarks and product names are the property of their respective owners. Where brand names such as Walter Tools are mentioned, it is for explanation only; there is no affiliation implied. The offered article is an original, factory-new product of the manufacturer.
P26335R10 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP35G coated-carbide grade for reliable steel machining and stable chip control; the result is increased process security and longer tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice and availability. P26335R10 WPP35G milling insert – Tiger·tec Gold coated carbide for steel | Walter Tools The P26335R10 WPP35G is a coated carbide milling insert engineered for efficient and dependable machining of steel, combining the Tiger·tec Gold coating technology with a grade optimised for universal and wear-resistant applications. Tiger·tec Gold coating for high process security Coated carbide grade WPP35G for durable edges Optimised for steel machining according to ISO P Reliable performance across universal applications Higher productivity through optimised coating and edge stability The combination of the Tiger·tec Gold coating and the coated carbide substrate reduces flank wear and extends cutting life, which delivers measurable gains in productivity. The coating is formulated for improved heat resistance and adhesion, so the insert maintains a stable cutting edge under the thermal loads typical of steel machining. For production environments this means fewer tool changes and more consistent cycle times, supporting cost-effective machining without compromising surface quality. Predictable behaviour in steel applications for consistent results Designed with the ISO P designation in mind, the grade is tailored for unalloyed and alloyed steel where typical chip formation and heat patterns occur. The insert provides stable chip control and predictable wear progression, which facilitates process planning and reduces variability in part quality. For operators less familiar with coating technologies, Tiger·tec Gold can be understood as a protective layer that helps the insert resist abrasive and adhesive wear, translating into repeatable component tolerances and improved first-pass yield. Practical integration and benefits for production workflows The insert’s geometry and grade balance toughness and wear resistance to suit a broad range of steel operations, from general-purpose milling to more demanding cuts where increased tool life matters. This balance supports higher material removal rates where appropriate, or a shift to longer tool life strategies to lower tooling costs per part. Technical documentation and specification support are available for machine- and process-specific optimisation, enabling straightforward incorporation into existing toolholders and tool management systems while preserving cycle-time targets. For reliable Tiger·tec Gold performance and tailored application advice, contact Metav Werkzeuge for availability and technical recommendations: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: P26335R10-WPP35G-WALTER Article: P26335R10 WPP35G Type: milling insert Manufacturer: Walter Tools Core specifications Material code: P Grade: WPP35G Series: Tiger·tec Gold Application group: ISO P (steel) Special features Coated carbide (coating technology Tiger·tec Gold) Optimised for steel machining Balanced wear resistance and toughness Designed for stable chip formation and process security FAQ What materials is this insert suitable for? The P26335R10 WPP35G milling insert is specified for steel applications (ISO P), covering both unalloyed and alloyed steels. How does the Tiger·tec Gold coating improve performance? Tiger·tec Gold on the WPP35G grade enhances heat resistance and coating adhesion, resulting in reduced wear and more consistent cutting-edge stability during steel machining. Is this grade suitable for roughing or finishing operations? The WPP35G grade is balanced for universal use and provides a compromise between toughness and wear resistance, making it suitable for a range of operations from general roughing to finishing in steel. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is original, brand-new merchandise from the manufacturer.
P26335R10 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold thermal stability and a coated carbide design for consistently productive milling in demanding materials; order the insert directly via Metav Werkzeuge or consult our specialists for process optimisation. P26335R10 WSM35G milling indexable insert — Tiger·tec Gold coating, for rostfreier Stahl and superalloys (Walter Tools) The P26335R10 WSM35G is a coated milling indexable insert designed for heavy-duty and heat-intensive machining tasks, primarily suited to rostfreier Stahl and heat-resistant superalloys. Tiger·tec Gold coating for thermal stability Suited for rostfreier Stahl and superalloys Coated carbide for a stable cutting edge Optimised for heavy-duty milling Boosted productivity through heat-resistant coating The combination of a Tiger·tec Gold coating with a coated carbide substrate delivers a clear production advantage: improved thermal resistance reduces flank wear under elevated cutting temperatures, which translates into longer tool life and more consistent component tolerances. Where high heat and adhesion threaten tool life, this insert maintains a stable cutting edge, enabling longer uninterrupted cycles. For process planners, the direct consequence is a reduction in tool changes and rework, which supports higher machine utilisation and lowers unit cost per part. The insert’s construction focuses on measurable outcomes — predictable wear behaviour and repeatable performance under demanding milling loads. Reliable machining of rostfreier Stahl and heat-resistant alloys This grade is explicitly developed for the ISO 513 material groups M and S, meaning suitability for rostfreier Stahl as well as heat-resistant superalloys and certain titanium applications. Those workpiece families tend to generate high temperatures and difficult chip forms; the chosen carbide and coating combination promotes secure chip formation and improved edge stability. By favouring a geometry that supports reliable chip flow and limiting edge build-up, the insert helps maintain surface integrity and dimensional accuracy in each pass. In practice, this results in fewer interruptions for manual cleaning or premature tool replacement and supports consistent cycle times in series production. Planning benefits for workshop and production managers Standardised designation and clear material assignment make inventory management and process documentation straightforward. The insert’s WSM35G grade and series alignment with Tiger·tec Gold provide transparency for cutter selection and allow straightforward comparisons between grades when optimising cutting data. For purchasing and maintenance teams, the predictable performance reduces variability in procurement and spare-part stocking. In addition, the association with a recognised brand supports confidence in batch quality and traceability, contributing to a dependable production chain and lower overall process risk. For tailored process guidance on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for application advice or to discuss integration into existing tool systems via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P26335R10-WSM35G-WALTER Type: Milling indexable insert Designation: P26335R10 WSM35G Series: Tiger·tec Gold Manufacturer: Walter Tools Core data Grade: WSM35G Substrate/coating: Coated carbide; Tiger·tec Gold Applicable ISO material groups: M, S Special features Coating: Tiger·tec Gold Suited for: rostfreier Stahl Also suitable for: heat-resistant superalloys and titanium (depending on geometry) Designed for heavy-duty milling and secure chip formation FAQ What materials is this insert intended for? The P26335R10 WSM35G milling insert (Walter Tools, SKU P26335R10-WSM35G-WALTER) is intended primarily for rostfreier Stahl and heat-resistant superalloys, corresponding to ISO 513 groups M and S. What advantage does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating offers enhanced thermal resistance and wear protection, which helps maintain a stable cutting edge under high temperatures and improves overall tool life for coated carbide inserts. Can this insert be used for finishing as well as roughing? Depending on the chosen insert geometry and cutting parameters, the grade supports both heavy-duty roughing and certain finishing passes; geometry selection should match the required surface quality and cycle time targets. How does the WSM35G grade affect chip formation? WSM35G is tailored to support secure chip formation in sticky or high-temperature materials; this reduces the risk of built-up edge and helps preserve surface integrity over extended cycles. Is the insert compatible with standard milling cutter systems? Yes — the insert follows common indexable insert designations and can be used in compatible cutter bodies that accept the P26335R10 designation; verify seat and clamping geometry before assembly. Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision metalworking tools and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners; brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
P26335R10 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold PVD coating and a robust carbide substrate for reliable, productive milling of steel, stainless steel and heat‑resistant alloys. The insert ensures stable cutting edges and extended tool life for continuous production. Order through Metav Werkzeuge or request application advice from our consultants. P26335R10 WSP45G indexable milling insert — Tiger·tec Gold PVD coating, for steel/stainless/superalloys (Walter Tools) The P26335R10 WSP45G is a PVD‑coated indexable milling insert designed for versatile milling applications across steels, stainless steels and heat‑resistant superalloys, offering a balance of edge stability and wear resistance for productive machining. Tiger·tec Gold PVD coating for edge stability Versatile for steel, stainless and superalloys High wear resistance for productive milling Consistent performance across demanding materials Increased process reliability through advanced coating and grade The combination of Tiger·tec Gold coating and a coated carbide substrate delivers measurable benefits for daily production: improved cutting edge stability, reduced flank wear and predictable tool life. The PVD‑coated surface reduces chemical wear at elevated temperatures, which is particularly important when machining tough or sticky materials. For manufacturing engineers this means more consistent component tolerances and fewer unplanned tool changes, helping to keep cycle times stable and throughput high. Reduced downtime and better economics per component By focusing on processes rather than individual tool changes, the grade helps to lower overall machining costs. The WSP45G composition is formulated for a balance of toughness and hardness, allowing for secure chip control and resistance to chipping under interrupted cuts. This results in fewer scrap parts and longer intervals between index changes. Practical advantages include less operator intervention, improved repeatability and a clearer return‑on‑effort in high‑mix or continuous milling operations. Clear guidance on applications and material compatibility The insert is intended for machining according to ISO material groups P / M / S: P (steels), M (stainless steels) and S (heat‑resistant superalloys and titanium). That classification signals how the grade addresses thermal loads, adhesion tendency and hard cutting edges. In practice, select stable clamping, appropriate coolant or dry strategies per machine capability, and the recommended insert geometry for your milling cutter to exploit the coating and substrate properties. For specific cutting data or to tailor the insert to a particular operation, technical advice is available. For productive, reliable milling with Walter Tools’ Tiger·tec Gold inserts, contact Metav Werkzeuge for ordering and cutting‑data consultation Technical Data Article number / SKU: P26335R10-WSP45G-WALTER Designation: P26335R10 WSP45G Product type: indexable milling insert Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WSP45G Applicable material groups (ISO): P / M / S Special features Coating: Tiger·tec Gold (PVD) Base material: coated carbide Suitable for: steel, stainless steel, heat‑resistant superalloys and titanium Application: milling FAQ What materials is this insert suitable for? The P26335R10 WSP45G insert is suitable for ISO groups P, M and S — that is, steels, stainless steels and heat‑resistant superalloys/titanium — benefiting from the Tiger·tec Gold PVD coating for improved edge life. How does the Tiger·tec Gold coating improve machining? The Tiger·tec Gold PVD coating on the WSP45G grade reduces chemical wear at elevated temperatures and improves cutting edge stability, which supports longer tool life and steadier machining of demanding materials. Is this insert intended for roughing or finishing? The WSP45G grade offers a balance of toughness and wear resistance suitable for a wide range of milling operations; selection for roughing or finishing depends on cutter geometry and cutting parameters rather than the insert grade alone. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
P26335R14 WKP25S WKP25S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger·tec Silver coating and the WKP25S grade for productive, reliable milling of steel and cast iron. Choose this insert for stable chip formation, extended tool life and consistent surface quality — available through Metav Werkzeuge or on request from their technical consultants. P26335R14 WKP25S milling indexable insert — Tiger·tec Silver coated grade by Walter Tools A P26335R14 WKP25S milling insert engineered for high-productivity milling of steels and cast iron across general and finishing applications Tiger·tec Silver coated grade WKP25S Optimised for steel and cast iron Stable chip formation and long life Productive milling performance Increased productivity through coating and grade optimisation The combination of the Tiger·tec Silver coating and the WKP25S carbide grade is designed to deliver consistently high cutting performance when machining steel and cast iron. The coating reduces friction at the cutting edge, lowering cutting temperatures and allowing higher cutting speeds without compromising tool life. For production-focused environments this means fewer tool changes and a smoother process flow. Technical terms such as coating and grade indicate a multi-layer surface treatment and a specific carbide substrate chosen to balance wear resistance with toughness. Predictable chip control and extended tool life cut downtime Stable chip formation is a key advantage of this grade: the geometry and substrate combination promote short, controllable chips when machining typical P and K materials. That translates into reduced risk of workpiece damage, easier chip evacuation and longer service intervals for the toolholder. The insert’s design supports repeatable surface quality and dimensional stability, which helps maintain cycle-time targets and reduces rework — a clear economic benefit in high-throughput operations. Versatile integration for common milling setups The insert fits standard milling toolholders that accept this designation and is suitable for a wide range of milling strategies, from roughing to light finishing, depending on the chosen cutter geometry. Its suitability for both steel and cast iron makes it a versatile option for mixed-production shops and jobbing environments. When tool selection is critical, the grade’s balance of wear resistance and edge robustness simplifies inventory and reduces the number of specialised inserts required for varied batches. Contact Metav Werkzeuge for application-specific recommendations and to request delivery or further technical data on this Walter Tools milling insert P26335R14 WKP25S Technical data Article number: P26335R14-WKP25S-WALTER Designation: P26335R14 WKP25S Manufacturer: Walter Tools Data ISO groups: P, K Grade: WKP25S Series: Tiger·tec Silver Special features Material compatibility: P / K (steel and cast iron) Coating: Tiger·tec Silver Product type: milling indexable insert WPL designation: P26335R14 FAQ Which materials is this insert suited for? The P26335R14 WKP25S insert is suited for steel (ISO group P) and cast iron (ISO group K), reflecting the WKP25S grade characteristics and the Tiger·tec Silver coating. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating on this insert reduces friction and heat at the cutting edge, enabling higher cutting speeds and improved wear resistance when machining steels and cast irons. Can this insert be used for finishing passes? Yes, depending on cutter geometry and machining parameters, the insert supports both productive roughing and controlled finishing operations for good surface quality. Is the grade suitable for mixed-production environments? The WKP25S grade was developed to offer a balance of toughness and wear resistance, making it appropriate for shops that handle both steel and cast-iron workpieces. What designation should appear on the toolholder for compatibility? Toolholders accepting the designation P26335R14 WKP25S or the corresponding geometry for Walter Tools milling inserts will be compatible with this insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for product identification and technical clarity. There is no affiliation between our company and the listed manufacturers. The offered item is an original, factory-new product of the manufacturer.
P26335R14 WKP35G WKP35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Gold wear resistance and precise chip control to maintain stable productivity in mixed steel and cast‑iron milling. The coated cemented‑carbide grade offers long tool life and consistent results; order the insert directly via Metav Werkzeuge or request application advice from their consultants. P26335R14 WKP35G milling indexable insert, Tiger‑tec Gold — for Steel and Cast Iron | Walter Tools A P26335R14 WKP35G milling indexable insert engineered for productive face and shoulder milling in steel and cast iron, utilising the Tiger‑tec Gold technology for improved wear resistance and process reliability. Tiger‑tec Gold coating for extended tool life Optimised for steel and cast iron machining Robust cutting edge stability under load Consistent chip control and surface finish Longer tool life through high‑performance coating The Tiger‑tec Gold technology combines a refined coating system with a coated cemented carbide substrate to reduce abrasive wear and thermal damage during interrupted cuts. This cutting grade is designed to provide a stable cutting edge, which translates into fewer index changes and reduced process interruptions. As a result, production runs benefit from improved uptime and predictable tool life, helping to plan tool consumption and minimise unforeseen tool changes. Predictable chip behaviour for steel and cast iron Developed for the ISO groups P (steel) and K (cast iron), the grade addresses the contrasting chip formation characteristics of both families. For steel, the geometry and grade support controlled heat management and continuous chips; for cast iron, the material composition favours resistance to abrasive wear and handles the typically short, brittle chips. The result is reliable chip control and improved surface finish on workpieces, which aids downstream processes and reduces rework. Seamless process integration and consistent performance As an indexable milling solution, the insert fits standard toolholders and cutter systems used in industrial machining, facilitating quick replacement and consistent cutting data across shifts. The WKP35G grade provides reproducible cutting behaviour, enhancing process stability and making parameter selection more straightforward in series production. Combined with the reputation of Walter Tools for precision tooling, the insert supports efficient machining cycles and contributes to cost‑effective component manufacturing. Contact Metav Werkzeuge for application advice and to secure the P26335R14 WKP35G Tiger‑tec Gold insert; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P26335R14-WKP35G-WALTER SKU: P26335R14-WKP35G-WALTER Product designation: P26335R14 WKP35G Series: Tiger‑tec Gold Grade: WKP35G Applicable groups: P / K Manufacturer: Walter Tools Core data Price (net): 18.36 (currency as provided) Special features Coated cemented carbide grade Suitable for steel machining Suitable for cast iron machining Optimised for chip control and wear resistance Indexable milling insert type FAQ What materials is the insert suitable for? The P26335R14 WKP35G insert is specified for ISO groups P and K, meaning suitability for steel and cast iron machining. What advantage does Tiger‑tec Gold provide? Tiger‑tec Gold coating on the wkP35G grade enhances wear resistance and cutting‑edge stability, which supports longer tool life and consistent machining results. How does the grade handle chip formation differences? The grade is tuned to the thermal and mechanical behaviour of both material groups: optimised heat management for steel and resistance to abrasive wear for cast iron, delivering predictable chip control. Is the insert compatible with standard milling toolholders? As an indexable milling insert, the design allows use in common milling cutter bodies that accept this ISO designation, enabling quick indexing and repeatable positioning. Which production benefits can be expected from using this insert? Using this grade improves process stability, reduces unscheduled tool changes and contributes to consistent component quality thanks to its wear‑resistant coating and stable cutting edge. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P26335R14 WKP35S WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating and a grade tuned for steel and cast iron, giving durable edge life and consistent chip control; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. P26335R14 WKP35S – Fräswendeschneidplatte (milling indexable insert) by Walter Tools, Tiger‑tec Silver for steel and cast iron A P26335R14 WKP35S indexable insert engineered for high‑productivity milling of P (steel) and K (cast iron) workpiece groups, combining a coated carbide substrate with the Tiger‑tec Silver coating technology. Tiger‑tec Silver coated carbide Designed for steel and cast iron Stable cutting edge, broad material range Suitable for industrial milling applications Durable coating for consistent edge life and throughput The Tiger‑tec Silver technology delivers a coated carbide solution that balances thermal stability and wear resistance for continuous milling tasks. The applied coating reduces adhesive and abrasive wear typical when machining steel and cast iron, which helps to maintain a sharp cutting geometry over longer tool life. For production environments this results in fewer index changes, more predictable component tolerances and improved tool‑set efficiency. The grade is optimised for typical chip formation in group P and group K materials, so the machining process becomes more repeatable and less susceptible to corner breakage or premature flank wear. Optimised for conventional milling operations and process security Designed as a milling indexable plate, the geometry and substrate combination focus on process reliability and stable cutting edges. The selection of a coated hardmetal grade enables higher cutting parameters while preserving surface quality and dimensional consistency. This insert supports manufacturers aiming to increase throughput without sacrificing surface finish: the stable cutting edge reduces vibration susceptibility and contributes to better control of chip flow. Where tighter cycle times are required, the plate’s characteristics permit more aggressive feeds and speeds within the toolholder and machine system limits, supporting an efficient production rhythm. Clear application guidance and practical handling benefits The plate is assigned to ISO groups P and K, indicating suitability for unalloyed and alloyed steel as well as cast iron; this classification simplifies tool selection in mixed‑material production shops. Handling and inventory become easier with a well‑defined grade and series, and the coated substrate reduces the frequency of regrinds or replacements. For shops seeking to standardise tooling, the Tiger‑tec Silver family offers a coherent performance profile across related insert geometries. For additional technical data or material‑specific recommendations, contact the technical consultants at Metav Werkzeuge by email or phone for dimension and clamping compatibility checks. Request tailored machining advice from Metav Werkzeuge regarding the Walter Tools Tiger‑tec Silver grade and ensure the correct insert geometry for the application – contact Metav Werkzeuge for consultancy and order support Technical data SKU: P26335R14-WKP35S-WALTER Item: Fräswendeschneidplatte P26335R14 WKP35S Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Material family: Coated carbide Core data ISO designation: P26335R14 WKP35S UID: P26335R14-WKP35S-WALTER Special features Coating technology: Tiger·tec Silver Workpiece groups: Steel (P), Cast iron (K) Product type: Milling indexable insert Suitable for industrial milling applications Stable cutting edge and broad material coverage FAQ What materials is this insert suitable for? The P26335R14 WKP35S insert is specified for ISO groups P and K, meaning it is suitable for machining steel (P) and cast iron (K) workpieces. What benefit does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP35S grade enhances thermal and wear resistance, leading to longer edge life and improved surface quality when milling steel and cast iron. Is this insert compatible with high cutting speeds? The coated carbide grade and optimised geometry allow for elevated cutting parameters compared with uncoated alternatives, supporting higher productivity while maintaining process security. How does the plate support chip control in cast iron? The grade and geometry are tuned to the typically short, breaking chips of cast iron, offering stable chip formation and reduced risk of chip jamming during interrupted cuts. Where to get application‑specific recommendations? For cutting data, clamping compatibility and geometry selection, Metav Werkzeuge’s consultants can provide tailored guidance for the P26335R14 WKP35S insert. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only; there is no connection between our company and the mentioned brands. The offered article is original, brand‑new merchandise of the manufacturer.
P26335R14 WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WPP35G grade and proven suitability for steel machining to increase tool life and process stability; order directly via Metav Werkzeuge or contact our consultants for cutting data and application support P26335R14 WPP35G milling indexable insert — Tiger·tec Gold coating, grade WPP35G (Walter Tools) The P26335R14 WPP35G is a coated carbide milling insert designed for productive steel machining and consistent edge performance Tiger·tec Gold coating for extended tool life Optimised for ISO P steel machining Stable cutting edge under high load Coated carbide grade WPP35G for consistent results High productivity for demanding steel operations The combination of the Tiger·tec Gold coating and the WPP35G grade provides a balance between wear resistance and toughness, which supports higher material removal rates in steel. The insert’s coated hardmetal substrate is engineered to withstand the heat and chip formation typical of ISO P applications; this leads to longer tool life and fewer tool changes. For production lines where uptime and cycle time are critical, this solution helps maintain steady output and reduces unplanned stoppages. The technical design focuses on consistent chip behaviour and predictable flank wear, enabling controlled tool life planning. Reduced downtime through reliable edge stability Reliable flank and rake-edge behaviour means fewer unexpected regrinds and improved dimensional repeatability across batches. The coating technology contributes to stable cutting edges, which results in reduced microchipping and higher surface quality on workpieces. In practice, this means less inspection rework and a clearer plan for insert replacement intervals. When paired with appropriate holders and correct setup, the system delivers measurable gains in productivity and process reliability — advantages that are particularly beneficial in high-volume steel production environments. Practical selection and application guidance for workshop use The insert belongs to the Tiger·tec Gold series and is classified under grade WPP35G, intended primarily for steel (ISO P). Its performance profile sits between wear-resistant and tougher grades, making it a versatile choice for a range of steel alloys where a compromise between life and robustness is required. Selection should consider workpiece alloy, depth of cut and cutting speed; tooling partners such as Metav Werkzeuge can provide recommended cutting data and application notes to match machine capacity and coolant strategy. For operations moving from general-purpose grades to a coated Tiger·tec Gold insert, expect improved surface finish and more consistent tool performance. Contact Metav Werkzeuge for tailored cutting data, application advice and to secure Tiger·tec Gold inserts optimised for steel machining Technical data SKU: P26335R14-WPP35G-WALTER Designation: P26335R14 WPP35G Type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPP35G Material group: P (steel) Core data Application group: ISO P (steel) Coating: Tiger·tec Gold Substrate: coated hardmetal Special features Coated carbide grade for combined wear resistance and toughness Optimised chip behaviour for steel machining per ISO 513 Designed for consistent edge stability and process reliability FAQ What materials is this insert suitable for? The P26335R14 WPP35G insert from Walter Tools is designed for machining steel and is classified for the ISO P material group, making it suitable for unalloyed and alloyed steels. What advantages does the Tiger·tec Gold coating provide? Tiger·tec Gold on the WPP35G grade improves wear resistance and thermal stability, leading to longer insert life and steadier cutting-edge behaviour under typical steel cutting temperatures. Is this insert suitable for high-speed machining? The coated carbide composition of the WPP35G grade supports elevated cutting speeds in steel applications; optimal parameters depend on machine rigidity, toolholder and coolant strategy — consult Metav Werkzeuge for specific cutting data. How should one choose between WPP35G and other grades? WPP35G offers a balance of wear resistance and toughness; choose it when both tool life and edge robustness are required. For very abrasive steels, select a higher wear-resistant grade; for interrupted cuts, favour tougher variants. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only and do not indicate any association between our company and the trademark holders. The offered article is an original, factory-new product of the manufacturer.
P26335R14 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold heat resistance, a coated carbide substrate and proven edge stability to increase productivity when machining stainless steels and superalloys; order via Metav Werkzeuge or consult our specialists for process integration. P26335R14 WSM35G Tiger‑tec Gold milling indexable insert – optimised for stainless steel and superalloys | Walter Tools A P26335R14 WSM35G milling insert designed for heavy‑duty applications, offering a coated‑carbide grade aimed at secure chip control and stable cutting edges in machining stainless steels and heat‑resistant superalloys Tiger·tec Gold coating for high heat resistance Optimised for stainless steels and superalloys Coated cemented carbide for robust cutting edges Walter Tools quality for consistent performance Durable performance for demanding materials The insert is engineered to handle materials that generate heat and stress at the cutting zone. The combination of a Tiger·tec Gold coating and a coated carbide substrate provides enhanced thermal resistance and wear control, which leads to more consistent tool life and fewer unplanned tool changes. For machining stainless steels (ISO group M) and heat‑resistant alloys or titanium (ISO group S), this specification supports secure chip formation and reduced risk of build‑up at the cutting edge. The technical design therefore focuses on predictable performance under elevated cutting temperatures, translating into measurable gains in cycle stability and reduced downtime. Reliable edge integrity and productivity gains The coated cemented carbide formulation delivers a stable cutting edge that sustains sharpness under intermittent or continuous heavy loads. In practice, this means longer stretches between regrinds or insert changes and a higher net output per toolset. The grade is particularly suited to operations where repeatability and surface finish matter; the coating enhances abrasion and heat resistance, while the substrate maintains structural support at the cutting lip. Such characteristics favour higher cutting speeds and sustained feed rates where compatible with the machine and workholding setup, enabling a clear cost‑benefit in medium to large production runs. Application guidance and selection criteria Selection of the correct insert geometry and clamping or cutter body remains essential: the grade performs best when paired with an appropriate insert geometry for the chosen operation (roughing, semi‑finishing or finishing) and a cutter that provides rigid support. For users less familiar with coating terminology, coated carbide denotes a hard tungsten‑based substrate with engineered surface layers that improve heat and wear resistance; this combination reduces edge breakdown and promotes chip control. Where stainless steels and superalloys are present in the component mix, choosing a grade targeted at ISO groups M and S—such as this—offers improved process security and consistent surface quality. Arrange a technical consultation with Metav Werkzeuge to evaluate the P26335R14 WSM35G Tiger·tec Gold milling insert for stainless steel and superalloy applications — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P26335R14-WSM35G-WALTER Item designation: Fräswendeschneidplatte P26335R14 WSM35G Walter Tools Series: Tiger‑tec Gold Grade: WSM35G Manufacturer: Walter Tools Facts ISO groups: S, M Material group designation: S / M Insert designation: P26335R14 WSM35G Applicable material: rostfreier Stahl Special features Coated cemented carbide Tiger·tec Gold coating technology Designed for stable chip formation Optimised for heavy‑duty machining and heat resistance FAQ What materials is this insert intended for? The P26335R14 WSM35G milling insert is intended primarily for stainless steels (ISO group M) and heat‑resistant superalloys and titanium (ISO group S), as specified by the Tiger·tec Gold grade. How does the Tiger·tec Gold coating improve machining? The Tiger·tec Gold coating on this Walter Tools insert increases heat and wear resistance, supporting consistent cutting‑edge integrity and improved chip control during demanding cuts. Can this insert be used for finishing passes? Yes, depending on the insert geometry chosen, the grade supports both semi‑finishing and finishing operations while maintaining surface quality in compatible steels and superalloys. Is this grade suitable for high cutting speeds? The coated carbide construction and Tiger·tec Gold technology favour higher cutting speeds where machine rigidity and process parameters allow, delivering productivity benefits and longer tool life. What identification should be ordered when specifying this insert? Order using the SKU P26335R14-WSM35G-WALTER or the ISO designation P26335R14 WSM35G to ensure the correct Walter Tools grade and series are supplied. Manufacturer: Walter Tools; The Walter AG (brand: Walter Tools), headquartered in Tübingen, Germany. Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original factory‑new goods of the manufacturer.
P26335R14 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold combination of durable PVD-coated carbide and a tough grade to secure consistent machining results across a wide range of materials; order directly via Metav Werkzeuge or ask the consultants for application support. P26335R14 WSP45G — Indexable milling insert, Tiger·tec Gold, Walter Tools The P26335R14 WSP45G is an indexable milling insert designed for robust milling across Stahl, rostfreier Stahl and heat-resistant alloys, offering a balance of edge stability and versatility for production and job-shop environments. Tiger·tec Gold PVD coating for long life Versatile for Stahl, rostfreier Stahl and superalloys Tough grade optimised for milling operations Stable cutting edge with reliable chip control Increased process reliability through Tiger·tec Gold technology The insert from the Tiger·tec Gold series combines a PVD-coated carbide substrate with a tough, versatile grade to deliver extended tool life under milling stresses. The WSP45G grade is formulated for applications that generate heat and variable chip forms, reducing premature flank wear and edge breakdown. For production planning, this translates into fewer tool changes and more predictable cycle times. The coating supports stable cutting edges, which helps maintain consistent surface finish and dimensional accuracy on workpieces made from Stahl and other demanding alloys. Broad material compatibility for flexible production schedules This indexable insert is intended for machining in the ISO groups P, M and S: P for general Stahl (including unalloyed and alloyed steels), M for rostfreier Stahl with its tendency to work-harden and form built-up edge, and S for heat-resistant superalloys and Titan where thermal load and edge strength are critical. The result is an all-rounder that reduces the need for multiple dedicated grades when machining mixed batches, enabling smoother changeovers and improved tool inventory utilisation. The design emphasises controlled chip formation and repeatable performance in a range of cutting conditions. Practical advantages at the machine and in process planning Choosing this insert supports efficient milling strategies: the combination of a tough substrate and advanced coating reduces the risk of edge chipping during interrupted cuts and contributes to steady wear progression in continuous cuts. For end-users, that means more reliable surface quality and fewer scrapped parts. The insert is compatible with standard indexable milling holders; selection of the correct seat and clamping torque is recommended to exploit the full potential of the WSP45G grade. For guidance on parameter windows and holder recommendations, Metav Werkzeuge provides technical consultation tailored to the machining task. Contact Metav Werkzeuge for a tailored application consultation and specification of the Walter Tools Tiger·tec Gold WSP45G insert — expert advice and order handling available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P26335R14-WSP45G-WALTER Product type: Indexable milling insert Designation: P26335R14 WSP45G Series: Tiger·tec Gold Grade: WSP45G Facts Substrate/coating: PVD-coated carbide Applicable material groups: P / M / S Material base: coated hard metal (carbide) Typical application: Milling operations Special features Tough, versatile PVD grade for milling Stable cutting edge and good wear resistance Designed for Stahl, rostfreier Stahl and superalloys Optimised for consistent chip control FAQ What materials can this insert machine effectively? The P26335R14 WSP45G insert by Walter Tools is suitable for machining materials in ISO groups P, M and S — notably Stahl, rostfreier Stahl and heat-resistant superalloys including Titan. What is the coating and why does it matter? The insert uses a PVD-coated carbide marketed under the Tiger·tec Gold series; this coating improves wear resistance and edge stability, extending life in demanding milling applications. Is this insert suitable for interrupted milling and pocketing? Yes — the WSP45G grade is designed to offer toughness and edge security, making it appropriate for interrupted cuts common in pocketing and roughing operations. How does the insert affect surface finish and tool life? By combining a robust substrate with advanced PVD technology, the insert supports steady wear progression and improved chip control, which together contribute to consistent surface finish and longer usable life compared with uncoated or less tough grades. Which holders or clamping considerations are recommended? Standard indexable milling holders with correct seat geometry and secure clamping are recommended; optimised clamping torque and holder stiffness enhance the performance of the WSP45G grade. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand presentation: Walter Tools) is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are mentioned for explanation and identification only; there is no affiliation or partnership implied. The offered item is an original, factory-new product from the stated manufacturer.
P26335R25 WKP25S WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for consistent, productive machining of steel and cast iron; the robust, coated carbide design reduces wear and supports predictable tool life. Order directly via Metav Werkzeuge or contact their consultants for application advice. P26335R25 WKP25S milling insert, coated carbide for steel and cast iron – Walter Tools A P26335R25 WKP25S milling insert engineered for productive machining of steel and cast iron in industrial milling applications. Tiger·tec Silver coating for long tool life Optimised for steel and cast iron machining Coated carbide grade WKP25S for stable cutting Compatible with standard milling toolholders Extended service life through advanced coating technology The Tiger·tec Silver series combines a wear-resistant surface with a precisely tuned carbide substrate to deliver extended tool life and consistent performance in demanding operations. The combination of coating and substrate reduces abrasive wear and heat-related degradation, meaning fewer insert changes and less unplanned downtime. The P26335R25 geometry supports repeatable cutting conditions, while the coated carbide construction offers high hardness and thermal stability without sacrificing toughness. This results in reduced production interruptions and better process economy for medium- to high-volume milling tasks. Predictable machining for steel and cast iron applications Designed for the ISO material groups P (steel) and K (cast iron), this grade addresses the typical thermal loads and chip behaviour of these workpiece families. For steel, the insert’s tuned coating controls adhesion and softening at elevated temperatures; for cast iron, the formulation counters abrasive wear and the tendency for short, breaking chips. The WKP25S grade offers a reliable balance between wear resistance and edge stability, supporting consistent surface quality and dimensional accuracy. Understanding these material groups helps in selecting cutting parameters that exploit the insert’s strengths and reduce the need for corrective machining. Integration benefits and reliable process behaviour The insert’s form factor and edge preparation are suited to integration with common milling toolholders, enabling straightforward tool assembly and compatibility across machine platforms. Stable chip formation and consistent edge retention contribute to predictable cycle times and improved overall equipment effectiveness. The Walter Tools manufacturing standard ensures batch-to-batch repeatability, which is particularly valuable in series production where interchangeability and process stability matter. For machining strategies that prioritise throughput and reproducible results, this insert provides a technically sound foundation. For application-specific recommendations or to check stock and delivery options for Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for detailed advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: P26335R25-WKP25S-WALTER Item name: Fräswendeschneidplatte P26335R25 WKP25S Manufacturer: Walter Tools Product type: Milling insert Grade/Sort: WKP25S Series: Tiger·tec Silver Facts Material groups: P (steel), K (cast iron) Material designation of insert: P / K UID: P26335R25-WKP25S-WALTER Special features Coated carbide (coating technology: Tiger·tec Silver) Optimised for stable cutting and wear resistance Suitable for steel and cast iron machining Designed for compatibility with standard milling toolholders FAQ What materials is this insert suitable for? The insert is designed for machining steel and cast iron (ISO groups P and K); the WKP25S grade targets the typical wear and chip characteristics of these materials. What does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating improves wear resistance and thermal stability, extending tool life and supporting consistent edge behaviour under elevated cutting temperatures. Is the insert compatible with standard milling holders? Yes, the geometry of the milling insert is intended for integration with common milling toolholders, enabling straightforward replacement and interchangeability in many tool systems. How does the WKP25S grade affect machining performance? The WKP25S grade balances hardness and edge stability to deliver predictable cutting behaviour, particularly useful in production environments requiring repeatable surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names are used for explanatory purposes only and do not imply any affiliation between our company and the manufacturers mentioned. The offered item is an original, brand-new product from the specified manufacturer.
P26335R25 WKP35G WKP35G Wendeplatten - Walter Tools
Benefit from the combination of high productivity and proven wear resistance offered by the Tiger‑tec Gold WKP35G grade for demanding milling applications; optimised for steel and cast iron machining. Order the P26335R25 WKP35G milling insert directly via Metav Werkzeuge or consult our specialists for application recommendations. P26335R25 WKP35G – milling insert (Tiger‑tec Gold) by Walter Tools, for steel & cast iron A P26335R25 WKP35G milling insert designed for productive roughing and finishing operations in steel and cast iron, combining a coated‑carbide substrate with a high‑performance coating for extended tool life Tiger‑tec Gold coating for long tool life Optimised for steel and cast iron machining Consistent edge stability and wear resistance Precision geometry for productive material removal More throughput with predictable tool life The P26335R25 WKP35G arrives as part of the Tiger‑tec Gold family, applying a hard, wear‑resistant coating to a robust coated carbide substrate to reduce abrasive wear and resist thermal degradation. This combination translates into longer intervals between indexings and fewer tool changes, directly increasing machine uptime. By enabling higher cutting speeds and steadier process behaviour, the insert supports systematic cycle‑time reductions while maintaining component quality. Reliable performance across steel and cast iron Developed for the ISO groups P and K, the grade is tuned to handle the thermal loads and continuous chips typical of steel as well as the abrasive, often short, breaking chips of cast iron. The coating technology improves resistance to flank and crater wear, while the carbide base maintains a solid cutting edge under varying cutting forces. For shops processing mixed batches, this versatility reduces tool inventory and simplifies tool selection without compromising surface finish or dimensional repeatability. Seamless integration and stable cutting results A balanced cutting geometry and dependable edge preparation provide edge stability and consistent chip formation, which supports predictable tool life and helps maintain surface integrity. The insert’s configuration is suitable for productive milling strategies and straightforward to adapt into existing toolholders and processes. With fewer unexpected tool failures and reproducible performance, production planning becomes more reliable and running costs are reduced through improved efficiency. Secure the P26335R25 WKP35G from Metav Werkzeuge for improved cycle times or request application support from our specialists at Metav Werkzeuge – info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: P26335R25-WKP35G-WALTER Article designation: P26335R25 WKP35G Manufacturer: Walter Tools Product type: milling insert Series: Tiger‑tec Gold Grade: WKP35G Material group: P / K Facts ISO groups: P / K Suitable for: Steel Suitable for: Cast iron Special features Coating: Tiger‑tec Gold Substrate: coated carbide Main application: milling operations Designed for wear resistance and edge stability FAQ What materials can this insert machine effectively? The P26335R25 WKP35G milling insert is suitable for ISO groups P and K, meaning it machines steel and cast iron effectively thanks to its Tiger‑tec Gold coating and coated‑carbide substrate. What does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating on this Walter Tools milling insert improves wear resistance, reduces flank and crater wear, and enables higher cutting speeds with consistent surface quality. Is this insert suitable for mixed production runs? Yes. The grade WKP35G provides reliable performance across both steel and cast iron, making it a practical choice for mixed‑material production and reducing the need for multiple dedicated grades. How does the insert influence process reliability? With a stable cutting edge and optimised geometry, the insert supports consistent chip control and predictable tool life, helping to lower downtime and improve repeatability in machining operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory‑new product from the manufacturer.
P26335R25 WKP35S WKP35S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WKP35S cutting grade delivers durable edge stability and broad material capability for continuous milling operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. P26335R25 WKP35S milling indexable insert for Steel & Cast iron — Tiger·tec Silver by Walter Tools The P26335R25 WKP35S is a coated carbide milling insert from the Tiger·tec Silver series, engineered for productive face and peripheral milling of steel and cast iron components. Tiger·tec Silver coating for enhanced wear resistance Optimised for steel and cast iron machining Consistent edge stability for reliable performance ISO designation P26335R25 WKP35S for simple identification High wear resistance and thermal stability for long runs The Tiger·tec Silver technology combines a robust substrate with a coating system designed to improve wear resistance and thermal stability during milling. This results in a coated carbide solution that maintains cutting-edge integrity under typical heat and abrasion conditions encountered when machining steel and cast iron. The improved heat management reduces flank and crater wear, supporting longer tool life and fewer index changes in production environments. Reliable machining across ISO P and K material groups Selected for applications classified under ISO P (steel) and ISO K (cast iron), this insert is tuned to handle both the ductile chips of steels and the more brittle, abrasive chips of cast irons. The WKP35S grade offers a balance between toughness and hardness, so the insert copes with the heat from continuous milling while providing stable chip formation. The main application may vary depending on insert geometry and catalogue recommendations, which ensures that cutting data and edge form are matched to the workpiece for optimal productivity. Identification, handling and process benefits for workshops The standardised ISO designation and clear grade marking support straightforward inventory management and fast replacement in multi-shift operations. As a milling indexable insert, P26335R25 WKP35S fits common toolholders and allows quick indexing to a fresh cutting edge, reducing machine downtime. Consistent edge behaviour enhances process security and contributes to repeatable surface finish quality, helping maintain parts tolerance and throughput in series production. For tailored technical advice on the Walter Tools Tiger·tec Silver P26335R25 WKP35S insert and fast supply from Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P26335R25-WKP35S-WALTER Article number: P26335R25 Product type: Milling indexable insert Grade: WKP35S Series: Tiger·tec Silver Brand: Walter Tools Facts Material groups: ISO P (steel), ISO K (cast iron) Material designation: P / K Application focus: Milling operations ISO designation: P26335R25 WKP35S Special features Coated carbide grade Designed for stable chip formation Suitable for production milling Marked for quick identification FAQ What materials can be machined with this insert? The insert is designed for steel (ISO P) and cast iron (ISO K) machining, matching the intended applications of the Tiger·tec Silver WKP35S grade. Is the P26335R25 WKP35S suitable for high-speed milling? The coated carbide construction of the Tiger·tec Silver grade provides enhanced thermal resistance and wear control, supporting productive milling speeds typical for steel and cast iron, subject to machine and process parameters. How does the WKP35S grade affect surface finish? The balanced toughness and coating behaviour of the WKP35S grade promotes consistent cutting edges and chip control, which helps achieve repeatable surface finishes in series production. How to identify the correct replacement insert? Use the ISO designation P26335R25 WKP35S and the Walter Tools marking to ensure compatibility with existing toolholders and the intended machining application. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names mentioned are the property of their respective owners. Brand names and protected trademarks are cited for explanatory purposes only; there is no affiliation between our company and the named brands. The item offered is an original, factory-new product from the manufacturer, Walter Tools.
P26335R25 WPP35G WPP35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, consistent chip control and straightforward integration into standard milling tool holders for a dependable production process. Order the insert direct via Metav Werkzeuge or consult the team for matching cutter bodies and process recommendations. P26335R25 WPP35G indexable milling insert by Walter Tools — Tiger·tec Gold coating for steel machining P26335R25 WPP35G is a coated carbide indexable insert designed for productive milling of steel, offering robust wear resistance and consistent chip formation for industrial machining. Tiger·tec Gold coating for extended tool life Coated carbide grade WPP35G Optimised for ISO P (steel) machining Consistent chip control and surface finish Increase throughput with a coating engineered for endurance The Tiger·tec Gold coating on this insert delivers a measurable improvement in tool life and thermal resistance compared with uncoated grades. By combining a wear-resistant top layer with a tough substrate, the insert maintains cutting edge integrity under the higher temperatures that arise when machining steel, reducing the need for frequent index changes. This stability translates into fewer interruptions on the shop floor and a more predictable production rhythm, supporting higher overall productivity. Predictable chips and reliable surface quality Designed for the ISO P material group, the insert’s geometry and grade promote controlled chip formation and consistent cutting behaviour. The result is a reliable surface finish and reduced secondary operations. The coated carbide construction balances toughness and hardness, so the component handles typical steel workpiece conditions—from continuous cuts to interrupted milling—while maintaining dimensional consistency and reducing the risk of built-up edge or chipping. Seamless integration into tool systems and process flexibility The insert fits standard indexable milling holders, enabling quick replacement and minimal setup time. Its design supports common feed and speed strategies used in steel milling, allowing machining centres to exploit higher cutting parameters where appropriate. With straightforward assembly and repeatable positioning, the insert contributes to stable production cycles and simplified tool inventory management—advantages that suit small-batch production and larger-volume runs alike. Practical notes for process selection and tool care When adopting this insert, consider matching cutter body and clamping torque to the recommended values for secure seating and repeatable runout. Cooling strategy influences performance: a controlled application of coolant or high-pressure coolant can extend life in heavy-duty operations, while air or minimal lubrication may be adequate for lighter duty cuts. Monitoring tool condition at regular intervals helps maintain consistent part quality and maximises the benefits of the Tiger·tec Gold technology. Contact Metav Werkzeuge for tailored tooling advice and to secure Walter Tools inserts like the P26335R25 WPP35G for demanding steel applications — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data Article number: P26335R25-WPP35G-WALTER SKU: P26335R25-WPP35G-WALTER Designation: P26335R25 WPP35G Product type: Indexable milling insert Series: Tiger·tec Gold Material: Coated carbide (grade P) Key figures SKU: P26335R25-WPP35G-WALTER UID: P26335R25-WPP35G-WALTER Special features Tiger·tec Gold coating Grade: WPP35G (coated carbide) Application: Steel (ISO P) Manufacturer: Walter Tools Robust wear resistance and consistent chip control FAQ What materials is this insert intended for? The P26335R25 WPP35G insert is optimised for machining steel (ISO P), with a grade and geometry tuned for typical steel cutting conditions. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating on this Walter Tools insert increases wear resistance and thermal stability, which helps extend tool life and reduce interruptions in production. Can this insert be used in standard milling holders? Yes, the insert is compatible with standard indexable milling bodies designed for P26335R25-style inserts and allows quick replacement for minimal downtime. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names belong to their respective owners. Brand names and protected designations are used here solely for explanation. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer. The Walter Tools brand is mentioned where applicable.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com