P44290-2R40-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of the WSM35G grade and Tiger·tec Gold coating for stable cutting-edge performance in demanding materials; reliable chip control reduces downtime and supports consistent productivity. Order the insert directly via Metav Werkzeuge or consult the specialists for application-specific guidance. P44290-2R40-D57 WSM35G — Indexable milling insert, Tiger·tec Gold, Walter Tools The P44290-2R40-D57 WSM35G is a robust indexable milling insert engineered for heavy-duty machining tasks, particularly in rostfreier Stahl and heat-resistant superalloys where thermal and mechanical loads are high Tiger·tec Gold coating for extended tool life WSM35G grade for heavy-duty machining Optimised chip control with 2R40-D57 chipbreaker Suitable for rostfreier Stahl and superalloys Reliable performance in high-demand materials The insert, specified as an indexable milling insert, delivers predictable results when faced with materials that challenge cutting edges. Built on the WSM35G grade and using the Tiger·tec Gold coating technology, the geometry and substrate are chosen to resist edge wear and minimise build-up. In practice, this means fewer tool changes and steadier component quality when machining rostfreier Stahl or high-temperature alloys; the enhanced heat resistance of the grade supports stable cutting at elevated temperatures, reducing the risk of premature flank wear and helping to keep cycle times consistent. Stable chip formation and process security The integrated 2R40-D57 chipbreaker promotes controlled chip formation and evacuation, which is essential for uninterrupted milling operations. By pairing the specific chipbreaker with the coated grade, the insert provides improved surface finishes and reduced risk of built-up edge that commonly occurs with tough materials. This combination increases process reliability and can contribute to a lower overall machining cost per component through longer tool life and fewer rejects, offering a clear rational advantage for production environments prioritising repeatability and uptime. Practical benefits for workshop and production planning Adopting this insert supports a pragmatic workflow: its compatibility with both rostfreier Stahl and superalloys reduces the need for multiple tool families, simplifying inventory and tool management. The insert's design focuses on consistent edge stability and predictable wear progression, enabling planners to schedule tool changes and maintenance with greater confidence. For operations seeking to optimise throughput without sacrificing component quality, the insert offers a technical foundation for improving machining stability and operational efficiency. Contact Metav Werkzeuge for application-specific recommendations on using the P44290-2R40-D57 WSM35G insert in production, or to request tailored cutting data and batch availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P44290-2R40-D57-WSM35G-WALTER Label: Fräswendeschneidplatte P44290-2R40-D57 WSM35G Walter Tools Product type: Fräswendeschneidplatte Core Data Grade: WSM35G Series: Tiger·tec Gold Chipbreaker: 2R40-D57 Material group suitability: S / M Special features Coating technology: Tiger·tec Gold (coated carbide) Application focus: rostfreier Stahl and heat-resistant superalloys / titanium Benefit: Optimised chip control and stable cutting edge FAQ What materials is this insert designed for? The P44290-2R40-D57 WSM35G insert is intended for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), providing the necessary heat resistance and edge stability for these materials. How does the 2R40-D57 chipbreaker improve machining? The 2R40-D57 chipbreaker on this Walter Tools insert promotes controlled chip formation and evacuation, which enhances surface finish and reduces interruptions during milling. Is the WSM35G grade suitable for high-speed cutting? WSM35G, in combination with Tiger·tec Gold coating, offers enhanced wear resistance and thermal stability that supports demanding cutting conditions, improving tool life under elevated cutting loads. Can this insert reduce overall tooling change frequency? Yes, the design and coating of the insert aim to extend edge life and provide predictable wear, which helps to reduce the frequency of tool changes and supports consistent production scheduling. The Walter AG (brand appearance: Walter Tools) is one of the leading international manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanation purposes only and do not indicate any affiliation. The offered article is an original, brand‑new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4460-2R04-G88 WNN15 Wendeplatten - Walter Tools
Robust chip control and a coated carbide grade result in predictable performance and extended tool life; the 2R04‑G88 chipbreaker supports stable evacuation during drilling and counterboring. Benefit from consistent process reliability and straightforward procurement — order directly via Metav Werkzeuge or consult our specialists for application matching. P4460-2R04-G88 WNN15 – drill/counterbore indexable cutting insert (2R04‑G88 chipbreaker) by Walter Tools The P4460-2R04-G88 WNN15 is an indexable insert developed for drilling and counterboring operations, offering a coated carbide grade for wear resistance and a defined chipbreaker geometry for controlled chip formation Coated carbide grade WNN15 2R04‑G88 chipbreaker for stable chips For drilling and counterboring applications Walter open series for versatile insertion Improved process reliability thanks to coated carbide and geometry The combination of a coated carbide cutting grade and a dedicated chipbreaker provides a measurable improvement in tool life and reproducibility under comparable cutting conditions. The WNN15 grade denotes a coated hardmetal class that is optimised for general turning and drilling tasks; its layered surface treatment reduces abrasive wear and supports a stable cutting edge. Because the precise workpiece suitability depends on the product matrix, material compatibility should be verified prior to series use, preserving efficiency and avoiding unexpected downtime. Predictable chip control reduces rework and machine stops A precisely shaped 2R04‑G88 chipbreaker promotes short, controllable chips during drilling and counterboring, lowering the risk of entanglement and enabling uninterrupted production cycles. Controlled chips contribute directly to improved surface quality and reduced secondary operations, which in turn supports a leaner workflow and lower per-part labour input. The insert’s geometry also aids consistent coolant access and stable cutting temperatures, reinforcing process reliability across repetitive batches. Easy integration into modular cutter systems and application planning Designed for compatibility with standard indexable toolholders, the insert supports rapid seating and indexation, helping to maintain cycle-time efficiency during tool changes. Application planning is simplified by the clear designation and series information; the open Walter grade series allows flexible selection across similar operations. For precise feed and speed values and to confirm material suitability, consult the product matrix or contact Metav Werkzeuge for tailored recommendations to match the machining task. Contact Metav Werkzeuge for application advice or order details at info@metav-werkzeuge.com or call +49 2822 7131930 — specialists will assist in matching the insert to specific machining requirements. Technical data Article number: P4460-2R04-G88-WNN15-WALTER Designation: P4460-2R04-G88 WNN15 Product type: Drill/counterbore indexable cutting insert Brand: Walter Tools Facts No numerical data supplied Special features Grade: WNN15 (coated carbide) Chipbreaker: 2R04‑G88 Series: Walter Schneidstoffsorte - Serie offen Material information: catalogue-dependent FAQ What materials is this insert suitable for? Material suitability depends on the product matrix; the P4460-2R04-G88 WNN15 is a coated carbide grade intended for general drilling/counterboring tasks, so consult the technical matrix to confirm compatibility. Can the insert be used in any standard indexable holder? The insert is designed for modular cutter systems; compatibility should be checked against the holder geometry and clamping specifications before installation. How does the 2R04‑G88 chipbreaker affect machining? The 2R04‑G88 geometry promotes short, consistent chips for cleaner evacuation, which supports improved surface quality and lowers the likelihood of machine interruptions when using the insert. Is the WNN15 grade suitable for high-speed operations? WNN15 is a coated hardmetal grade offering wear resistance; confirmation of high-speed suitability requires reference to the product matrix and cutting-parameter guidance for the insert. How is tool life optimised with this insert? Optimised tool life is achieved through the coated carbide grade and the chipbreaker design, which together reduce abrasive wear and stabilise cutting forces during repetitive drilling and counterboring tasks. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
P4460-2R08-G88 WK10 Wendeplatten - Walter Tools
Take advantage of the combination of WK10 uncoated carbide, the 2R08-G88 chipbreaker and Walter’s open series for consistent chip formation and predictable machining results. The insert supports efficient drilling and reaming processes while material suitability should be confirmed via the manufacturer’s product matrix. For application advice or availability contact Metav Werkzeuge. P4460-2R08-G88 WK10 — Boring/Drilling indexable insert with 2R08-G88 chipbreaker by Walter Tools P4460-2R08-G88 WK10 is an indexable insert for drilling and reaming, designed to deliver stable chips and economical tool life in general machining environments WK10 uncoated carbide grade 2R08-G88 chipbreaker for stable chips Walter open series for broad application Reliable edge life for consistent machining Precise chip control for uninterrupted production The insert combines the 2R08-G88 chipbreaker with the WK10 uncoated carbide grade to improve chip segmentation and evacuation during drilling and reaming. A clearly defined chip geometry reduces the risk of chip clogging in through-hole and blind-hole operations, which in turn lowers machine downtime and increases effective spindle utilisation. The chipbreaker’s contour is engineered to guide chips away from the cutting zone, promoting safer tool behaviour under varying feed and speed conditions. For best results the product matrix should be consulted to confirm material compatibility and cutting data. Predictable performance and machining economy Built from an uncoated carbide class in Walter’s open series, the insert prioritises reproducible edge quality and affordable operation. The choice of WK10 offers a balance between toughness and hardness suitable for many standard metallurgical groups; this supports longer intervals between index changes and steady component quality. Predictable tool life simplifies production planning and cost calculation: fewer unexpected tool changes mean more continuous runs and improved labour efficiency. Walter’s series designation signals a standardised approach to grade selection, helping procurement and process engineers align tooling choices with production targets. Practical integration and application notes As an indexable insert for drilling and reaming, the item is compatible with holders designed for P4460-style inserts and follows common mounting practices for secure clamping and repeatable positioning. The insert is catalogue-dependent regarding specific substrate composition; detailed material specifications and recommended cutting data are available in the manufacturer’s documentation. Operators are advised to verify the insert’s suitability against the actual workpiece material by consulting the Walter product matrix, ensuring optimal feeds, speeds and coolant strategies are selected. When integrated correctly, the system supports consistent surface finish and dimensional stability across batches. Contact Metav Werkzeuge for tailored technical advice on Walter Tools inserts and to confirm availability of the P4460-2R08-G88 WK10 — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: P4460-2R08-G88-WK10-WALTER Product label: Bohr-/Aufbohrwendeschneidplatte P4460-2R08-G88 WK10 Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Grade: WK10 Chipbreaker: 2R08-G88 Series: Walter Schneidstoffsorte - Serie offen Material (catalogue dependent): Katalogabhängig ISO designation: P4460-2R08-G88 WK10 Facts No explicit numerical cutting data supplied in the product feed Special features Uncoated carbide grade (unbeschichtetes Hartmetall) Chip control geometry: 2R08-G88 Series designation: open series for broad application Intended applications: drilling and reaming (bohr/aufbohr) Suitability recommendation: check manufacturer product matrix for specific materials FAQ What materials is the P4460-2R08-G88 WK10 insert suited for? The P4460-2R08-G88 WK10 insert is supplied in a Walter uncoated carbide grade; material suitability should be verified against the Walter product matrix for precise recommendations. How does the 2R08-G88 chipbreaker improve drilling performance? The 2R08-G88 chipbreaker shapes and segments chips to aid evacuation during drilling and reaming, reducing clogging and stabilising cutting forces for more consistent machining. Is the insert compatible with standard P4460 holders? Yes, the insert follows the P4460 designation and is intended for holders designed for that style of indexable insert, ensuring repeatable clamping and position accuracy. Does WK10 indicate a coated or uncoated grade? WK10 refers to an uncoated carbide (unbeschichtetes Hartmetall) grade in Walter’s open series, chosen for a balance of toughness and wear resistance in general machining tasks. How can users obtain recommended cutting data for this insert? Recommended cutting data and detailed substrate information are available from the manufacturer’s documentation; the product matrix gives the best guidance for feeds, speeds and coolant strategy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand: Walter Tools) is among the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names serves explanatory purposes only and does not indicate any affiliation. The offered article is an original, factory-new product of the stated manufacturer.
P4460-2R08-G88 WNN15 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide cutting grade, an optimised chipbreaker, and the established Walter engineering for consistent holemaking performance; this insert supports productive drilling and bore-enlarging operations while material suitability should be verified against the product matrix. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. P4460-2R08-G88 WNN15 – Drill / reaming indexable insert by Walter Tools, coated carbide with 2R08-G88 chipbreaker The P4460-2R08-G88 WNN15 is a coated carbide indexable insert designed for drilling and bore-enlarging tasks where reliable chip control and repeatable tool life are required; suitability for specific workpiece materials must be confirmed with the product matrix Coated carbide grade WNN15 Optimised 2R08-G88 chipbreaker For drilling and bore enlargement Walter open-series cutting grade Consistent holemaking through a robust cutting grade The core advantage of this insert is its WNN15 cutting grade, a coated carbide class engineered for general-purpose performance within Walter's open series. The coating and substrate combination prioritises wear resistance and stable edge geometry, which together reduce the frequency of index changes and support predictable tool life. As a result, machining cycles benefit from fewer interruptions and improved process repeatability. For integrators and production engineers this means a more reliable cutting tool package that fits into established drilling and reaming toolholders. Precise chip control and reduced rework The 2R08-G88 chipbreaker is specifically shaped to control swarf formation during drilling and bore enlargement, improving evacuation from the cutting zone and lowering the risk of built-up edge. Effective chip control helps maintain hole quality and surface finish while reducing the likelihood of tool-induced damage to the workpiece. In practical terms, this leads to fewer secondary operations and higher first-pass yields, supporting a more economical manufacturing flow without sacrificing component tolerances. Practical selection and application guidance Selection must be guided by the product matrix: the WNN15 grade is a coated carbide class intended for a variety of applications, but exact material suitability depends on the specific workpiece and cutting parameters. The insert is supplied under Walter’s open series philosophy, enabling flexible application across different tool systems. When assessing the insert for a job, note the chipbreaker geometry and intended cutting data; these determine achievable feeds and speeds as well as the optimal coolant strategy. For questions about compatibility with a particular toolholder or workpiece material, consult the technical documentation or the product matrix. For application advice or to secure supply of this Walter Tools P4460-2R08-G88 WNN15 indexable insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and ordering assistance Technical data SKU: P4460-2R08-G88-WNN15-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4460-2R08-G88 WNN15 Walter Tools Product type: Drill / reaming indexable insert Cutting grade: WNN15 Chipbreaker: 2R08-G88 Series: Walter cutting grade - open series Facts No numerical specifications provided in the source data Special features Cutting class: coated carbide Material information: catalogue-dependent Application note: check material suitability with product matrix WPL designation: P4460-2R08-G88 WNN15 Manufacturer: Walter Tools FAQ What materials can this insert machine effectively? The suitability of the P4460-2R08-G88 WNN15 insert for specific materials is determined by the product matrix; the grade WNN15 is a coated carbide class, and compatibility should be checked against the matrix for the intended workpiece. How does the 2R08-G88 chipbreaker influence performance? The 2R08-G88 chipbreaker improves chip control during drilling and bore enlargement, which supports consistent hole quality and reduces the risk of swarf-related interruptions. Can this insert be used in existing Walter toolholders? The P4460-2R08-G88 WNN15 is part of Walter’s open series and is intended for compatible toolholder systems; confirm mechanical fit and clamping specifications with the holder documentation. Is there guidance for selecting cutting data with this insert? Recommended feeds and speeds depend on workpiece material and machining conditions; use the product matrix and Walter technical resources to determine initial cutting data for the WNN15 grade. How does the coated carbide grade affect tool life? The coated carbide construction enhances wear resistance and edge stability, contributing to repeatable tool life and fewer index changes under appropriate cutting conditions. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the brands cited. The offered article is original, brand-new goods from the manufacturer.
P45420-G67 WHH15X WHH15X Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide WHH15X and the G67 chipbreaker for predictable chip control and consistent milling performance; choose this insert for efficient indexable milling operations and contact Metav Werkzeuge for application advice or ordering. P45420-G67 WHH15X Fräswendeschneidplatte – coated carbide, chipbreaker G67 (Walter Tools) P45420-G67 WHH15X is a coated indexable milling insert engineered for controlled chip formation and stable cutting performance in milling applications Coated carbide grade WHH15X Chipbreaker G67 for controlled chips For indexable milling applications Consistent chip control for improved production stability The integrated chipbreaker G67 is designed to produce predictable chip shapes during milling, which reduces the risk of chip entanglement and tool damage. Predictable chips contribute directly to process stability and fewer interruptions on the shop floor, translating into higher machine uptime. For operators and process planners, the clear benefit is more consistent cycle times and reduced secondary operations for chip management. Material suitability should be verified in the product matrix to match the insert’s performance to specific workpiece materials. Wear resistance and reliable cutting performance from the coated carbide grade The WHH15X designation denotes a coated carbide grade formulated for general-purpose milling where a balance of wear resistance and toughness is required. The coating enhances surface hardness and thermal resistance, which helps to maintain the cutting edge at elevated temperatures and extend tool life under standard industrial cutting conditions. Coated carbide here refers to a carbide substrate with a thin, engineered coating that improves abrasion resistance; this is a common method to increase the longevity of indexable inserts without altering basic cutting geometry. Practical integration and application guidance for machining setups The insert is intended for use in standard indexable milling toolholders; its ISO-style designation facilitates identification and replacement in existing tool inventories. For optimal results, select cutting parameters and holder geometry that complement the WHH15X grade and the G67 chip control. If clarification is required on suitability for a particular workpiece material or machining strategy, Metav Werkzeuge offers technical consultation to align the insert selection with production goals. Reliable supply of genuine Walter Tools inserts supports consistent procurement and process repeatability. Contact Metav Werkzeuge for tailored application advice on Walter Tools inserts and to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P45420-G67-WHH15X-WALTER Label: Fräswendeschneidplatte P45420-G67 WHH15X Walter Tools Product type: Fräswendeschneidplatte Brand: Walter Tools Core data Grade: WHH15X Chipbreaker: G67 ISO designation: P45420-G67 WHH15X Special features Coated carbide (beschichtetes Hartmetall) Series: Walter Schneidstoffsorte - Serie offen Sorteneinsatz: Verify material suitability in product matrix Wendeplatte identification: P45420-G67 FAQ What materials can this insert machine? The P45420-G67 WHH15X insert is a coated carbide grade; material compatibility depends on the specific application matrix, so suitability should be checked against the product matrix prior to use. How does the G67 chipbreaker affect milling? The G67 chipbreaker is engineered to produce controlled chips, improving chip evacuation and reducing the likelihood of chip-related interruptions during milling operations with the Walter Tools insert. Is the WHH15X grade suitable for high-speed machining? WHH15X is a coated carbide grade designed to balance wear resistance and toughness; assessment for high-speed applications should reference the product matrix and machining parameters to confirm compatibility. Can the insert be used in standard indexable milling holders? The ISO-style designation P45420-G67 WHH15X indicates standardised identification; the insert is intended for indexable milling holders compatible with that ISO form factor. How to verify the best cutting parameters for this insert? Selection of cutting speed and feed should be based on the workpiece material and toolholder rigidity; consult the product matrix and Metav Werkzeuge’s technical team for parameter recommendations. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of Walter Tools.
P45420-G67 WPM15G WPM15G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WPM15G grade for consistent edge stability and controlled chip formation; order directly via Metav Werkzeuge or consult our technical advisors for suitability in specific applications. P45420-G67 WPM15G milling indexable insert — Tiger·tec Gold, G67 chipbreaker — Walter Tools A P45420-G67 WPM15G milling insert engineered for productive milling applications, combining a coated carbide grade with an optimised chipbreaker for stable, repeatable machining. Tiger·tec Gold coating for extended tool life WPM15G coated carbide grade for consistent performance G67 chipbreaker for controlled chip formation Increase throughput with reliable edge performance The coated carbide formulation in the Tiger·tec Gold family delivers improved wear resistance and thermal stability, which translates into longer tool life and fewer interruptions for insert changes. The WPM15G grade is designed to offer a balanced performance between wear resistance and toughness; this balance helps to maintain a stable cutting edge under typical milling stresses. For production environments aiming to reduce machining cycles and maximise spindle utilisation, the controlled wear behaviour of this insert supports predictable regrind or replacement intervals and thus contributes to a more efficient manufacturing rhythm. Achieve consistent chip control and process stability The G67 chipbreaker is engineered for dependable chip separation and evacuation during milling. Effective chip control reduces the risk of recutting, improves surface finish consistency and lowers the potential for toolholder or workpiece damage. In practice, this means less scrap and fewer quality-related disruptions on the shop floor. For operators and process planners, the clear link between chip geometry and cycle reliability makes this insert a pragmatic choice where repeatability and predictable tool behaviour are priorities. Practical implementation and application guidance Selection of the correct insert grade and geometry should follow the manufacturer's product matrix to match the workpiece material and machining strategy. The P45420-G67 WPM15G is a coated indexable insert within Walter Tools’ Tiger·tec Gold range; its actual suitability for specific materials must be confirmed against the product matrix and cutting data. For further technical clarifications, recommended cutting parameters or to discuss integration into existing tool systems, Metav Werkzeuge provides application advice and additional data to support process planning and implementation. Contact Metav Werkzeuge for tailored application advice on the Walter Tools P45420‑G67 WPM15G and to arrange stock checks or technical consultation — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data SKU: P45420-G67-WPM15G-WALTER Article designation: P45420-G67 WPM15G Product type: Milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WPM15G Chipbreaker: G67 Material: Catalogue-dependent Measurable data No numerical specifications provided Special features Coated carbide (Tiger·tec Gold) Optimised chip control via G67 Walter Tools quality standard Product matrix reference: check manufacturer's data FAQ What is the main benefit of this insert? The combination of the Tiger·tec Gold coating and the WPM15G grade offers improved wear resistance and consistent edge behaviour for milling operations, reducing tool changes and supporting stable process outputs. How does the G67 chipbreaker affect machining? The G67 geometry promotes controlled chip breakage and reliable evacuation, which enhances surface finish consistency and lowers the risk of recutting or toolholder interference when using the P45420‑G67 WPM15G insert. Is this insert suitable for all materials? Material suitability must be verified in the manufacturer's product matrix; the P45420‑G67 WPM15G is a coated carbide insert in the Tiger·tec Gold series and may be recommended for a range of workpiece materials depending on the selected cutting data. How can the insert be identified on delivery? Identification is via the marking and SKU: P45420‑G67 WPM15G (SKU P45420‑G67‑WPM15G‑WALTER), which corresponds to Walter Tools’ Tiger·tec Gold family. Where to get cutting data or optimisation advice? Cutting data and process recommendations are available from the supplier; refer to the product matrix for the P45420‑G67 WPM15G or consult Metav Werkzeuge for application-specific guidance. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation and identification only; there is no affiliation between our company and the mentioned brands. The described article is an original, factory‑new product of Walter Tools.
P45424-1-G67 WAK15 Wendeplatten - Walter Tools
Combining productive machining, compatibility with aluminium and non‑ferrous metals, and the proven Walter N‑Sortensystem, this insert delivers stable chip formation and consistent surface quality. Benefit from an uncoated carbide WAK15 grade designed for sharp cutting edges and low adhesion; order the P45424-1-G67 WAK15 directly via Metav Werkzeuge or ask our consultants if needed. P45424-1-G67 WAK15 – milling indexable insert for aluminium and non‑ferrous metals, Walter Tools P45424-1-G67 WAK15 is an indexable milling insert engineered for high‑efficiency machining of aluminium and other non‑ferrous materials within the Walter N‑Sortensystem. Uncoated carbide WAK15 grade Optimised for aluminium machining Walter N‑Sortensystem compatible Chipbreaker 1‑G67 for reliable chips Engineered for efficient aluminium machining The insert is based on an uncoated carbide formulation identified as WAK15, developed specifically for N‑class applications. This composition delivers a very sharp cutting edge and low friction against soft materials, which reduces the tendency for material adhesion and built‑up edge. As a result, the insert supports higher feed rates and more consistent component surfaces when working with aluminium and alloys. The design focus is on predictable performance rather than decorative coatings, emphasising reliable metal removal and long interval times between index changes. Stable chip formation and improved process reliability A main advantage of the included 1‑G67 chipbreaker geometry is controlled chip formation tailored to light, ductile materials. The geometry reduces long, stringy chips and promotes short, manageable fragments that enhance machine safety and reduce manual intervention. Within the Walter N‑Sortensystem, this translates into repeatable chip control, improved process stability and fewer interruptions on the shop floor. For operations where cycle consistency matters, the insert’s geometry contributes directly to measurable productivity gains. System compatibility that reduces downtime The insert format and designation integrate seamlessly into modular tool bodies of the Walter N‑Sortensystem, enabling rapid replacement and straightforward tool management. Using standardised insert shapes and clamping interfaces shortens changeover times and helps maintain cutting parameters across batches. The consequence is a more efficient workflow and reduced non‑productive time, which supports higher throughput without compromising surface quality or dimensional consistency. Practical application and selection guidance Choose this insert for operations that primarily involve aluminium or other N‑classified non‑ferrous metals where a sharp, uncoated cutting edge is preferable. Its uncoated nature simplifies reconditioning via mechanical methods where applicable and avoids issues linked to coating delamination on soft, adhesive materials. While specific cutting data depend on machine and workpiece details, the combination of WAK15 grade and the 1‑G67 chipbreaker is particularly suited to high‑feed finishing and semi‑finishing passes that require both good surface appearance and secure chip evacuation. Contact Metav Werkzeuge for tailored advice on integrating Walter Tools inserts like the P45424-1-G67 WAK15 into existing tooling systems; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P45424-1-G67-WAK15-WALTER Product type: Milling indexable insert Designation: P45424-1-G67 WAK15 Grade: WAK15 (uncoated carbide) Series: Walter N‑Sortensystem Chipbreaker: 1‑G67 Material group: N (non‑ferrous metals) Application: Aluminium and non‑ferrous metals Core specifications SKU: P45424-1-G67-WAK15-WALTER Series designation: Walter N‑Sortensystem Sort: WAK15 Chipbreaker code: 1‑G67 Special features Sharp cutting edge geometry for reduced adhesion Uncoated carbide composition Optimised for aluminium machining Compatible with Walter N‑Sortensystem tool bodies FAQ What materials is this insert suitable for? The P45424-1-G67 WAK15 milling indexable insert from Walter Tools is designed primarily for aluminium and other N‑classified non‑ferrous metals, offering sharp edges and low adhesion for these materials. Is the grade coated or uncoated? The WAK15 grade used in the P45424-1-G67 insert is an uncoated carbide formulation, chosen to provide a very sharp cutting edge and to avoid coating issues when machining soft metals. How does the 1‑G67 chipbreaker affect machining? The 1‑G67 chipbreaker promotes short, controllable chips when machining ductile materials, improving chip evacuation and process stability with the Walter N‑Sortensystem. Can this insert be used in standard Walter tool holders? Yes, the insert is compatible with holders and tool bodies designed for the Walter N‑Sortensystem, allowing straightforward integration and fast index changes. What are the typical application areas for this insert? Typical uses include finishing and semi‑finishing operations on aluminium components where surface quality and reliable chip control are required; the P45424-1-G67 WAK15 insert supports productive machining in these scenarios. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand presentation: Walter Tools), headquartered in Tübingen, is one of the world's leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation implied between our company and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer.
P45424-1-G67 WHH15X WHH15X Wendeplatten - Walter Tools
Combining the WHH15X coated carbide grade with the 1‑G67 chipbreaker yields reliable chip control and consistently productive milling results; order the insert via Metav Werkzeuge or consult our specialists for application matching. P45424-1-G67 WHH15X — Milling indexable insert with 1‑G67 chipbreaker by Walter Tools P45424-1-G67 WHH15X is a versatile indexable insert developed for general milling tasks where controlled chips and stable cutting performance are required Coated carbide grade WHH15X Chipbreaker 1‑G67 for chip control Designed for productive milling Open-series Walter grade WHH15X Improved process efficiency through stable grade technology The WHH15X grade is a coated carbide formulation engineered for stable cutting performance across a broad range of applications. By combining a wear-resistant coating with a precisely formed substrate, the insert delivers productive milling and consistent dimensional results. For production environments where repeatability matters, the controlled interaction of coating and substrate reduces flank wear, which in turn helps maintain cycle times and lowers tool-change frequency. The technical classification as a coated cemented carbide indicates a material engineered for wear protection; customers are advised to verify material suitability against the product matrix before release into series production. Better chip control and extended tool life with 1‑G67 geometry The integrated chipbreaker 1‑G67 offers targeted chip formation and evacuation, which reduces re-cutting and heat concentration at the cutting edge. Improved chip control benefits both finishing and semi‑roughing passes by preventing long, stringy chips and by promoting stable cutting forces. As a result, the insert helps extend tool life and supports process security on automated milling centres. For operators unfamiliar with chipbreaker nomenclature, 1‑G67 denotes a geometry optimised for controlled fracturing of chips on common workpiece materials—check the product matrix for precise performance data on specific alloys. Practical integration and selection guidance for milling operations As an indexable insert, the item fits standard milling cutter pockets that accept the P45424 series designation; compatibility depends on the cutter body and clamping system. Material information is catalogue‑dependent, so selection should be paired with the cutter manufacturer’s clamping data and the production planner’s material list. Walter Tools’ open‑series approach to this grade offers flexibility across multiple workpiece types, but confirming application limits—especially for hardened or exotic materials—ensures process reliability. For bespoke recommendations or to match the insert to a particular machine setup, the Metav Werkzeuge team can provide practical, application‑oriented advice. For technical selection assistance or to order the P45424‑1‑G67 WHH15X insert from Walter Tools, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P45424-1-G67-WHH15X-WALTER Article designation: P45424-1-G67 Product type: Milling indexable insert Brand: Walter Tools Facts Grade: WHH15X Chipbreaker: 1‑G67 Series: Walter Schneidstoffsorte - Serie offen Cutting material class: coated carbide Special features Catalogue‑dependent material information Check product matrix for workpiece suitability Designed for productive milling operations Open‑series grade for broad process coverage FAQ What materials is this insert intended for? The insert in grade WHH15X is a coated carbide type; specific workpiece suitability should be checked in the product matrix for the P45424‑1‑G67 WHH15X insert to ensure optimal results. How does the 1‑G67 chipbreaker affect machining? The 1‑G67 chipbreaker promotes controlled chip formation and evacuation, improving chip control and reducing heat concentration, which contributes to longer tool life and more stable cutting forces. Can the insert be used in any milling cutter body? The P45424‑1‑G67 designation identifies the insert geometry and seating; compatibility depends on the cutter body and clamping system. Verify seat type and clamping specifications before assembly. Where can application support be obtained for this insert? Application and selection support for the P45424‑1‑G67 WHH15X milling indexable insert is available through Metav Werkzeuge’s technical consultancy to match the insert with the intended machine and workpiece material. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for clarification only. There is no affiliation between our company and the named brands. The offered article is original factory‑new goods of the manufacturer.
P45424-2-G67 WAK15 Wendeplatten - Walter Tools
Take advantage of a dedicated solution for aluminium and other non‑ferrous machining: the combination of a sharp, uncoated carbide grade and an optimised 2‑G67 chipbreaker delivers clean cuts, stable chip formation and reliable productivity. Order the insert directly via Metav Werkzeuge or request technical advice from the consultants. P45424-2-G67 WAK15 – Indexable milling insert for aluminium (Walter Tools) A P45424-2-G67 WAK15 indexable milling insert engineered for high‑performance machining of aluminium and other non‑ferrous metals Walter N-series, WAK15 grade for non-ferrous metals Optimised 2-G67 chipbreaker for reliable chip control Uncoated carbide for sharp edges and low adhesion Suitable for aluminium and other NE metals Faster, cleaner aluminium machining through sharper cutting geometry The insert uses an uncoated carbide grade developed in the Walter N-series to provide sharp cutting edges that minimise material adhesion and reduce built‑up edge when machining aluminium. The combination of a precise edge preparation and a low‑friction cutting geometry leads to improved surface finish and fewer secondary operations. For production environments where cycle time and part quality are decisive, the insert’s geometry supports higher feed rates with predictable results, translating into measurable gains in throughput and part consistency. Predictable chip control for continuous productivity Equipped with the 2‑G67 chipbreaker, the tool promotes consistent chip control across common non‑ferrous alloys. The chipbreaker geometry is designed to break long, stringy chips typical of soft metals and produce short, controllable chips that evacuate cleanly from the cutting zone. This stability helps to extend tool life and maintain process reliability, reducing interruptions and improving overall productivity. The design is particularly effective for face milling and light slotting operations where controlled chip flow prevents rework and tool damage. Easy integration into milling applications and production lines As an indexable milling insert, the item fits standard toolholders and enables quick indexing to a fresh cutting edge, shortening machine downtime and simplifying inventory management. The insert’s focus on non‑ferrous machining makes it suitable for a range of applications from prototype work to volume production where consistent part quality is required. Its compatibility with the Walter N‑system grades ensures straightforward grade selection for similar machining tasks across different aluminium alloys and NE metals, supporting efficient process planning and repeatable results. For application advice, availability or to source Walter Tools P45424-2-G67 WAK15 directly, contact Metav Werkzeuge for tailored recommendations and ordering via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: P45424-2-G67-WAK15-WALTER SKU: P45424-2-G67-WAK15-WALTER Product type: Fräswendeschneidplatte / indexable milling insert Grade: WAK15 Series: Walter N‑Sortensystem Chipbreaker: 2‑G67 Facts Material group: N (non‑ferrous metals) Suitable materials: Aluminium, other NE metals Coating: uncoated Designation: P45424-2-G67 WAK15 Special features Optimised for aluminium and non‑ferrous metals Sharp edge geometry for reduced adhesion Stable chip formation and controlled chips Compatible with Walter N‑series tooling FAQ Which materials is this insert best suited for? The P45424-2-G67 WAK15 insert is designed primarily for aluminium and other non‑ferrous metals, leveraging its WAK15 carbide grade and geometry to avoid material build‑up. Is the insert coated or uncoated? This insert uses an uncoated carbide grade (WAK15) to provide exceptionally sharp edges and minimise adhesion when machining soft, gummy alloys. How does the 2‑G67 chipbreaker improve machining? The 2‑G67 chipbreaker produces short, controlled chips in non‑ferrous materials, improving evacuation, reducing reprocessing and promoting longer tool life with consistent cutting conditions. Can this insert be used for both face milling and slotting? Yes; the geometry and chipbreaker combination make the insert suitable for light slotting and face milling operations in aluminium and similar alloys. How is the insert indexed and maintained in production? The insert is an indexable milling insert compatible with standard holders, allowing quick edge changes to restore cutting performance and reduce machine downtime. Manufacturer: Walter Tools (Walter AG, part of the Sandvik Group); AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com Protected trademarks and trade names remain the property of their respective owners. Brand names and registered trademarks are used solely for explanation and reference. There is no affiliation between Metav Werkzeuge and the trademark owners; the offered article is original and factory‑new.
P45424-2-G67 WHH15X Wendeplatten - Walter Tools
Benefit from the combination of Walter Tools' WHH15X coated carbide for productive milling and the 2‑G67 chipbreaker for controlled chip formation. The result is consistent cutting performance and straightforward tool selection — order the P45424-2-G67 WHH15X insert directly via Metav Werkzeuge or ask our consultants if needed. P45424-2-G67 WHH15X milling indexable insert – coated carbide, chipbreaker 2‑G67 (Walter Tools) P45424-2-G67 WHH15X is an indexable milling insert designed to deliver stable chip control and reliable coated-carbide performance in general milling applications Coated carbide grade WHH15X Chipbreaker 2‑G67 for stable chips Open series for broad application Walter Tools quality and consistency Consistent chip control improves machining reliability The primary advantage of the design is its focus on chip control. The integrated 2‑G67 chipbreaker promotes predictable chip formation, which reduces the risk of recutting and helps to maintain a stable cutting process. In practice, this means fewer interruptions for manual chip management and a smoother workflow during medium- to high-volume milling operations. The insert geometry supports even chip evacuation across the cutting edge, contributing to repeatable surface finish and process stability. Coated carbide grade for versatile cutting tasks The insert is manufactured in the WHH15X coated carbide grade, a coated tool material intended for broad applicability. The coating improves wear resistance and helps to preserve the cutting edge under typical milling loads. Combined with the insert’s geometry, this results in reliable performance across a range of component geometries and machining strategies. Material suitability should be verified against the product matrix, as the grade is described as coated carbide and catalogue-dependent for specific applications. Practical guidance for selection and integration Selection remains straightforward: match the insert designation to the tool body and confirm the chipbreaker preference for the intended milling strategy. Since material compatibility and cutting parameters depend on the application, consult the technical matrix when planning operations. Operationally, the insert supports stable, productive milling cycles when used with appropriate feed and speed settings; the Walter Tools engineering background ensures consistent manufacturing quality and repeatable geometry across batches. For additional technical data or clarification, Metav Werkzeuge can provide the necessary specifications. Contact Metav Werkzeuge to request technical details or to discuss the P45424-2-G67 WHH15X milling insert and its suitability for specific machining tasks Technical data SKU: P45424-2-G67-WHH15X-WALTER Article: P45424-2-G67 WHH15X Type: Milling indexable insert Brand: Walter Tools Facts Chipbreaker designation: 2‑G67 Grade/series: WHH15X / Walter Schneidstoffsorte - Serie offen Material note: Catalogue-dependent Special features Coated carbide grade (WHH15X) Designed for stable chip formation Open series for broad application FAQ What chipbreaker does this insert use? The insert uses the 2‑G67 chipbreaker designed for controlled chip formation during milling. Is the WHH15X grade coated carbide? Yes, WHH15X is specified as a coated carbide grade; check the product matrix for exact coating details. Can this insert be used for all workpiece materials? Material suitability is catalogue-dependent; consult the technical matrix to confirm compatibility for specific materials and applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original factory-new goods of the manufacturer.
P4840C-1R-E67 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process stability, broad material capability and consistent edge life for efficient drilling and boring operations; order directly via Metav Werkzeuge or contact the technical team for detailed application advice. Bohr-/Aufbohrwendeschneidplatte P4840C-1R-E67 WKP35S – Tiger‑tec Silver coated drill/boring indexable insert by Walter Tools Bohr-/Aufbohrwendeschneidplatte P4840C-1R-E67 WKP35S is a coated indexable insert developed for drilling and boring applications in steel and cast iron, offering a reliable cutting edge and predictable tool life Tiger‑tec Silver coated carbide Optimised for steel and cast iron ISO designation P4840C-1R-E67 Suitable for drilling and boring Consistent cutting performance for mixed production The insert delivers repeatable machining results in serial and batch production thanks to the WKP35S grade, a coated carbide developed for the thermal and abrasive demands of steel and cast iron. The combination of a robust substrate and the Tiger‑tec Silver technology provides improved heat management and reduced flank wear, which translates into longer intervals between indexings and more predictable maintenance cycles. This reliability supports production planning and reduces unscheduled downtime in machining centres. Efficient machining through optimised chip control The 1R‑E67 chipbreaker geometry is designed to promote controlled chip formation during drilling and boring operations. For operations in accordance with ISO 513 material groups P (steel) and K (cast iron), the geometry encourages short, consistent chips, reducing the risk of chip entanglement and improving surface finish. The insert’s behaviour under load helps maintain feed and speed parameters, enabling higher metal removal rates while preserving component quality — a rational advantage for productivity-focused shops. Broad applicability and process security Belonging to the Tiger‑tec Silver series, the insert is suited to a wide range of steels and cast irons encountered in general engineering and component manufacture. The coated grade supports both roughing and semi‑finishing operations where edge stability and wear resistance are decisive. By combining a modern coating system with a reliable substrate, the design addresses common machining challenges such as thermal softening and abrasive wear, offering a balance between cutting performance and tool life that benefits cost‑effective production. Contact Metav Werkzeuge today for application-specific recommendations or to request the matching toolholders and optimisation data for the P4840C-1R-E67 WKP35S insert Technical Data Article number: P4840C-1R-E67-WKP35S-WALTER ISO designation: P4840C-1R-E67 WKP35S Brand: Walter Tools Series: Tiger‑tec Silver Geometry: 1R‑E67 Facts Material group suitability: Steel (P) Material group suitability: Cast iron (K) Coating technology: Tiger‑tec Silver Grade: WKP35S Special features Coated carbide construction Designed for drilling and boring applications Optimised chipbreaker for short chips Stable edge life and wear resistance FAQ What materials is this insert suitable for? The P4840C-1R-E67 WKP35S insert is specified for machining steel (ISO group P) and cast iron (ISO group K), utilising the Tiger‑tec Silver coating for improved wear resistance. Which operations match the geometry 1R‑E67? The 1R‑E67 geometry is tailored for drilling and boring operations where controlled chip formation and consistent feeds are required; it supports both roughing and semi‑finishing passes with the WKP35S grade. How does Tiger‑tec Silver benefit machining performance? Tiger‑tec Silver provides enhanced heat control and a durable coating layer that reduces flank wear, giving the WKP35S grade a longer useful life and more predictable tool changes. Is this insert compatible with standard toolholders for indexable drill systems? The insert follows the ISO designation P4840C-1R-E67 and can be used in compatible indexable drill and boring tool systems designed for that insert form and size. What is the expected advantage in production environments? Using the WKP35S Tiger‑tec Silver insert typically improves process stability and reduces unplanned tool interventions, supporting continuous production and consistent part quality. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4840C-1R-E67 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and a dedicated 1R‑E67 chipbreaker to ensure stable cutting edges and reliable chip control in demanding drilling and reaming operations; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. P4840C-1R-E67 WSP45G — drilling/reaming indexable insert by Walter Tools A versatile drilling and reaming indexable insert, P4840C-1R-E67 WSP45G, designed for high process security in steel, stainless steel and heat-resistant alloys; ideal for demanding metalcutting applications Tiger·tec Gold PVD coating for extended tool life Suitable for ISO groups P, M and S Chipbreaker 1R‑E67 for consistent chip control Designed for drilling and reaming operations Longer tool life and consistent cutting behaviour for fewer tool changes The combination of the Tiger·tec Gold coating and the WSP45G grade delivers a PVD-coated carbide surface that reduces flank wear and preserves the stable cutting edge under thermal and mechanical stress. This results in reliably longer tool life and fewer unexpected tool changes during a production shift, which supports higher machine availability and lower per-part costs. The insert’s engineered coating and substrate chemistry are tuned to maintain edge integrity when machining typical construction and high-strength steels. Predictable chip control and reduced rework in mixed-material batches The 1R‑E67 chipbreaker geometry provides controlled chip formation across a range of feed rates and hole depths, improving swarf evacuation and minimising the risk of built-up edge. The grade is specified for ISO 513 groups P / M / S, meaning it is suitable for unalloyed and alloyed steel, rostfreier Stahl and heat-resistant superalloys or titanium-based materials. Explaining ISO group use: P indicates steels, M indicates stainless steels and S covers superalloys and titanium—this insert’s geometry and coating help manage the distinct thermal and mechanical challenges each group presents. Improved surface finish and process security in drilling and reaming Designed specifically for drilling and reaming operations, the insert’s cutting geometry supports reproducible hole quality and dimensional stability. The combination of drilling/reaming-optimised rake and the WSP45G grade reduces vibration sensitivity and helps achieve consistent bore roundness and surface finish. For production environments where repeatability is critical, this leads to less downstream polishing or rework and supports tighter tolerance holding in serial machining. Practical advantages for the workshop: integration and economy The insert integrates seamlessly into standard indexable-drill and boring tool bodies and benefits from Walter Tools’ manufacturing consistency. Fewer tool changes and reduced scrap rates translate into measurable productivity gains on the shop floor. The WSP45G grade is a good compromise between toughness and wear resistance, making it versatile for mixed-production runs. For technical specification matching and toolholder compatibility, Metav Werkzeuge can provide concrete guidance and ensure the insert is used to its full potential. For tailored application advice on the Walter Tools P4840C-1R-E67 WSP45G drilling/reaming insert and to check toolholder compatibility, contact Metav Werkzeuge for personalised recommendations at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: P4840C-1R-E67-WSP45G-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4840C-1R-E67 WSP45G Walter Tools Product type: Bohr-/Aufbohrwendeschneidplatte Series: Tiger-tec Gold Grade: WSP45G Key figures Applicable material groups: P, M, S (ISO 513) Chipbreaker designation: 1R-E67 Material designation: P / M / S UID: P4840C-1R-E67-WSP45G-WALTER Special features PVD-coated carbide cutting grade Designed for drilling and reaming applications Suited for steel and rostfreier Stahl and superalloys/titanium Stable cutting edge and reliable chip control Manufacturer: Walter Tools FAQ What materials can this insert machine effectively? The P4840C-1R-E67 WSP45G insert is specified for ISO 513 groups P, M and S, meaning it is suitable for machining steel, rostfreier Stahl (stainless steel) and heat-resistant superalloys or titanium alloys. How does the Tiger·tec Gold coating benefit cutting performance? The Tiger·tec Gold coating on the WSP45G grade reduces abrasive wear and improves thermal stability, which extends tool life and maintains cutting-edge integrity during continuous drilling and reaming cycles. What role does the 1R‑E67 chipbreaker play in holemaking? The 1R‑E67 chipbreaker promotes consistent chip formation and evacuation, reducing the risk of swarf-related damage and helping to secure a stable machining process during both drilling and reaming. Is this insert compatible with standard indexable drill holders? The insert is designed for common indexable drilling and boring tool systems; Metav Werkzeuge can confirm specific toolholder compatibility for the P4840C-1R-E67 WSP45G SKU. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the manufacturers named. The offered article is an original, factory-new product of Walter Tools.
P4840C-1R-E67 WXP40 Wendeplatten - Walter Tools
Take advantage of the combination of WXP40 uncoated carbide and the 1R‑E67 chipbreaker for reliable chip control and consistent cycle times; order the P4840C-1R-E67 WXP40 directly via Metav Werkzeuge or consult our application specialists for process-aligned selection P4840C-1R-E67 WXP40 drill/boring indexable insert by Walter Tools The P4840C-1R-E67 WXP40 is an indexable insert designed for drilling and bore-enlargement operations, offering stable cutting performance in a range of machining setups Uncoated carbide grade WXP40 1R‑E67 chipbreaker for consistent chip control Suitable for drilling and boring operations Walter Tools series with production-oriented design Improved chip control for uninterrupted production The 1R‑E67 chipbreaker is engineered to guide and break chips reliably during drilling and bore-enlargement operations, reducing the risk of clogging and tool pull-out. By achieving consistent chip control the insert helps stabilise feed rates and maintain cycle time, which in turn raises effective productivity on the shop floor. The geometry supports controlled evacuation in through-tool and conventional coolant scenarios, allowing machine setups to run longer between stoppages while maintaining surface quality. Explanation of the chipbreaker function is provided in simple terms: a chipbreaker alters the chip flow to create short, manageable fragments that are easier to evacuate and less likely to entangle. Grade and material behaviour explained to aid selection The WXP40 designation denotes an uncoated carbide grade specified by Walter Tools within the open series. Uncoated grades often deliver predictable cutting behaviour and are suited where coating adhesion is not required or where chip formation benefits from a bare substrate. The exact workpiece suitability should be checked against the manufacturer’s material matrix to confirm compatibility with specific materials and cutting parameters. For customers seeking a balance of cost-efficiency and consistent edge performance, WXP40 provides a straightforward, economical choice for general machining tasks where coated grades are unnecessary. Easy integration and consistent repeatability in CNC environments As an indexable insert, the P4840C-1R-E67 WXP40 fits established toolholders and indexable drilling systems, simplifying tool management and reducing changeover time. The insert’s design emphasises repeatability and a stable cutting edge to support series production and predictable tool life. Integrating the insert into standard holders ensures quick index changes and straightforward inventory handling, while the series design philosophy from Walter Tools targets practical workshop use and availability. For process planners, this translates into less setup complexity and lower variance between shifts, contributing to steady manufacturing output. For application-specific advice or to procure Walter Tools P4840C-1R-E67 WXP40 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert, production-oriented guidance Technical Data SKU: P4840C-1R-E67-WXP40-WALTER Article designation: P4840C-1R-E67 WXP40 Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools Facts Chipbreaker: 1R‑E67 Grade: WXP40 (uncoated carbide) Series: Walter Schneidstoffsorte - Serie offen UID: P4840C-1R-E67-WXP40-WALTER Special features Material information: Katalogabhängig Application focus: drilling and bore enlargement ISO designation: P4840C-1R-E67 WXP40 Design intent: production-oriented, stable chip formation FAQ What chip control benefits does the 1R‑E67 chipbreaker provide? The 1R‑E67 chipbreaker on the P4840C-1R-E67 WXP40 promotes short, consistent chips which reduce clogging and improve evacuation during drilling and boring, helping to maintain cycle time and surface finish. Is the WXP40 grade coated or uncoated? WXP40 is specified as an uncoated carbide grade in the Walter Tools open series; its behaviour is predictable and suitable where coating is not required. Can this insert be used for both drilling and bore enlargement? Yes, the insert is intended for drilling and bore-enlargement operations and is designed to fit compatible indexable holders for those applications. How should material suitability be verified? Material compatibility should be confirmed against the manufacturer’s material matrix; the product notes advise checking the specific material matrix to ensure optimal selection for the intended workpiece. What system benefits come from using an indexable insert like this one? Indexable inserts such as the P4840C-1R-E67 WXP40 enable fast indexing, consistent repeatability and simplified inventory management, all of which support steady production performance. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4840C-1R-E77 WN15 Wendeplatten - Walter Tools
Benefit from the combination of a dedicated chipformer, a robust uncoated carbide grade and a purpose-designed geometry to support stable machining in drilling and reaming operations; order the insert directly via Metav Werkzeuge or consult the technical team for application guidance. P4840C-1R-E77 WN15 drilling/reaming indexable insert, 1R‑E77 chipbreaker — Walter Tools The P4840C-1R-E77 WN15 is an indexable insert for drilling and reaming applications, equipped with a 1R‑E77 chipbreaker and supplied in the Walter open-series carbide grade. Uncoated carbide grade WN15 1R‑E77 chipbreaker for chip control For drilling and reaming operations Consistent chip control for productive machining The combination of the WN15 uncoated carbide grade and the 1R‑E77 chipbreaker offers a technical basis for stable chip formation during holemaking. Uncoated carbide means the cutting edge is produced from cemented carbide without additional PVD/CVD layers, which can provide a direct, predictable wear pattern and straightforward regrinding options where applicable. The defined chip geometry reduces the risk of long, stringy chips and supports continuous metal removal, contributing to fewer interruptions and a more predictable machining cycle. Adaptable performance and process reliability Designed as part of an open series, this insert provides flexibility across a range of toolbody systems and applications while maintaining repeatable cutting behaviour. The open-series classification indicates that the grade and geometry are positioned for generality rather than niche optimisation; therefore, compatibility with specific workpiece materials and cutting parameters should be verified against the manufacturer’s product matrix. This approach helps maintain process reliability and supports planning for tool-life expectations and tool-change intervals. Selection guidance and application considerations When assessing suitability, refer to the product matrix to confirm material compatibility and recommended cutting data, since the grade is specified as catalogue-dependent for some dimensions. For holemaking where chip evacuation and consistent surface integrity matter, the 1R‑E77 chipbreaker is engineered to aid controlled chip segmentation. For bespoke advice on feeds, speeds and holder matching, technical support from Metav Werkzeuge is available to ensure the insert is applied in a way that balances productivity and component quality. For tailored application advice on Walter Tools inserts such as the P4840C-1R-E77 WN15, contact Metav Werkzeuge for precise recommendations and support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P4840C-1R-E77-WN15-WALTER Manufacturer: Walter Tools Product type: drilling/reaming indexable insert Facts No numeric specifications provided in the available data Special features Grade: WN15 (uncoated carbide) Chipbreaker: 1R‑E77 Series: Walter Schneidstoffsorte - Serie offen Designation: P4840C-1R-E77 WN15 Material specification: catalogue dependent FAQ What materials is this insert suitable for? The insert is supplied in the WN15 uncoated carbide grade; suitability for specific materials must be checked against the Walter Tools product matrix for the P4840C-1R-E77 WN15 insert. Is the P4840C-1R-E77 WN15 coated or uncoated? The P4840C-1R-E77 WN15 is an uncoated carbide insert, which produces a predictable wear pattern and allows clear assessment of cutting-edge condition. How does the 1R‑E77 chipbreaker affect machining? The 1R‑E77 chipbreaker is designed to promote chip segmentation and controlled evacuation during drilling and reaming, supporting more stable machining cycles with fewer interruptions. Can Metav Werkzeuge provide cutting-data recommendations? Yes, Metav Werkzeuge can advise on cutting parameters and holder compatibility to align the P4840C-1R-E77 WN15 insert with specific applications and process goals. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanatory purposes. There is no commercial relationship implied between Metav Werkzeuge and the trademark holders. The offered article is original, factory-new production from the manufacturer.
P4840C-1R-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for durable, cost-efficient machining of steel and cast iron; the proven chipbreaker geometry ensures stable chip formation and fewer interruptions. Order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and process support. P4840C-1R-F57 WKP35S – Drilling/boring indexable insert for steel and cast iron, Walter Tools The P4840C-1R-F57 WKP35S is a drilling/boring indexable insert engineered for high-productivity holemaking and bore enlargement in steel and cast iron, combining a Tiger·tec Silver coating with a dedicated chipbreaker geometry. Tiger·tec Silver coated carbide grade Optimised for steel and cast iron machining Stable chip formation with 1R-F57 geometry Reliable cutting edge for series production Higher productivity through advanced coating and grade The combination of the Tiger·tec Silver coating and the WKP35S coated carbide grade provides measurable gains in cutting performance when machining steels (ISO group P) and cast irons (ISO group K). The coating reduces abrasive wear and improves thermal resistance, which permits higher cutting speeds and longer tool life compared with conventional grades. For production environments, this translates into fewer tool changes and a more consistent manufacturing rhythm, contributing directly to improved throughput and lower unit costs per hole. Consistent chip control and improved surface quality The 1R-F57 chipbreaker geometry is designed for controlled chip formation during drilling and bore finishing operations. Stable chips reduce the risk of entanglement and machine stoppages, while consistent shear action helps achieve a better surface finish and dimensional repeatability. In practical terms, the geometry supports reliable chip evacuation in through-hole and partial-depth applications, so operators benefit from reduced rework and a more predictable process window. Designed for process reliability and easy implementation As an insert for drilling and bore enlargement, the design supports quick indexing and replacement, keeping machine uptime high. The grade’s balance of toughness and wear resistance delivers robust edge stability under the thermal and mechanical loads typical of holemaking in steel and cast iron. Integrating this insert into a production line provides a dependable solution for serial drilling tasks, where repeatable results and minimal adjustment time are priorities. For application-specific cutting data or toolholder compatibility, consultation with Metav Werkzeuge can clarify speeds, feeds and coolant strategy. Contact Metav Werkzeuge for tailored cutting data and order support for the Walter Tools P4840C-1R-F57 WKP35S insert — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: P4840C-1R-F57-WKP35S-WALTER Article designation: P4840C-1R-F57 WKP35S Product type: Drilling/boring indexable insert Brand: Walter Tools Numbers / Core technical data Chipbreaker: 1R-F57 Grade/Sort: WKP35S Series: Tiger·tec Silver Material groups: P (steel), K (cast iron) Designs / Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Main application: holemaking, bore enlargement Stable chip formation and reliable cutting edge FAQ What materials is this insert designed for? The P4840C-1R-F57 WKP35S insert is specified for ISO groups P and K, meaning it is optimised for steel and cast iron machining. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating enhances wear resistance and thermal stability, allowing higher cutting speeds and extended edge life for the WKP35S grade. What benefits does the 1R-F57 chipbreaker provide in drilling applications? The 1R-F57 geometry delivers controlled chip formation and improved evacuation during drilling and bore enlargement, reducing stoppages and improving surface finish. Is this insert suitable for serial production? Yes, the combination of grade, coating and chipbreaker geometry is aimed at process reliability and repeatable performance in series holemaking operations. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names remain the property of their respective owners. Brand names and protected product names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
P4840C-1R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
P4840C-1R-F57 WSP45G Bohr-/Aufbohrwendeschneidplatte von Walter Tools Die P4840C-1R-F57 WSP45G bietet robuste Zerspanungslösungen für Fräsanwendungen und vielseitige Werkstoffbearbeitung Hohe Prozesssicherheit durch Tiger·tec Gold Technologie Vielseitig einsetzbar für Stahl, rostfreien Stahl und hitzebeständige Legierungen Stabile Spanbildung dank 1R-F57 Spanbrecher Beschichtetes Hartmetall für verbesserte Standzeit Präzise Beschichtung für lange Standzeit und Prozesssicherheit Die WSP45G-Sorte basiert auf beschichtetem Hartmetall und nutzt die Tiger·tec Gold-Technologie, die speziell für zähe und vielseitige Einsätze entwickelt wurde. Diese PVD-Beschichtung erhöht die Verschleißfestigkeit und reduziert thermische Beanspruchung an der Schneidkante. Für Anwender bedeutet das weniger Stillstandzeiten und konstante Ergebnisse bei Serienläufen. Effiziente Spanbildung und zuverlässige Schneidkante Der 1R-F57 Spanbrecher ist auf kontrollierte Spanformung ausgelegt und sorgt für gleichmäßige Spanabfuhr auch bei anspruchsvollen Werkstoffen. Dadurch wird die Werkzeugbelastung reduziert und die Maschine kann mit stabileren Schnittwerten betrieben werden. Anwender profitieren von höherer Produktivität und reproduzierbarer Oberflächengüte. Breite Werkstoffabdeckung für flexible Fertigungsprozesse Entwickelt für die Bearbeitung der ISO-Gruppen P, M und S, eignet sich dieses Wendeschneidplattensystem für unlegierte und legierte Stähle, rostfreien Stahl und hitzebeständige Superlegierungen sowie Titan. Die Auswahl dieser Sorte ermöglicht eine einheitliche Werkzeugbestückung in Mischfertigungen und vereinfacht Lagerhaltung sowie Prozessplanung. Wirtschaftlichkeit durch längere Einsatzintervalle Dank der Kombination aus robuster Beschichtung und optimierter Spanform reduziert sich der Werkzeugverschleiß; das zahlt sich in geringeren Werkzeugkosten pro Werkstück aus. Insbesondere in Serienfertigungen zeigt sich die wirtschaftliche Wirkung durch selteneren Plattenwechsel und höhere Maschinenverfügbarkeit. Empfehlung: Für produktive Fräs- und Bohranwendungen die P4840C-1R-F57 WSP45G von Walter Tools wählen und bei Detailfragen die technische Beratung kontaktieren, E‑Mail: info@metav-werkzeuge.com – Telefon: +49 2822 7131930 Herstellerangaben Produktmerkmale Artikelnummer: P4840C-1R-F57-WSP45G-WALTER Marke: Walter Tools Serie: Tiger-tec Gold Produktart: Bohr-/Aufbohrwendeschneidplatte Fakten Besonderheiten Sorte: WSP45G Spanbrecher: 1R-F57 Materialangabe: P / M / S Beschaffenheit: beschichtetes Hartmetall (PVD) Einsatzgebiet: Fräsanwendungen Bearbeitbare Werkstoffe: Stahl Bearbeitbare Werkstoffe: rostfreier Stahl Bearbeitbare Werkstoffe: hitzebeständige Superlegierungen / Titan Storytrigger: Wendeplatten FAQ Welche Werkstoffe lassen sich mit dieser Wendeschneidplatte bearbeiten? Die P4840C-1R-F57 WSP45G von Walter Tools eignet sich für Stahl, rostfreien Stahl und hitzebeständige Legierungen wie Titan und Superlegierungen entsprechend ISO 513. Welche Besonderheit hat die Tiger·tec Gold Beschichtung? Die Tiger·tec Gold Beschichtung der WSP45G-Sorte ist eine PVD-Beschichtung, die Verschleißfestigkeit und Wärmebeständigkeit verbessert und damit die Standzeit der Wendeschneidplatte erhöht. Wie unterstützt der 1R-F57 Spanbrecher die Zerspanung? Der 1R-F57 Spanbrecher formt Späne kontrolliert und sorgt für saubere Spanabfuhr, was zu stabileren Schnittbedingungen und besserer Oberflächengüte bei der Bearbeitung führt. Ist diese Wendeschneidplatte für Serienfertigung geeignet? Ja, die P4840C-1R-F57 WSP45G Wendeschneidplatte von Walter Tools wurde für produktive Einsätze konzipiert und reduziert Werkzeugwechsel durch höhere Standzeit. Hersteller: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4840C-1R-F57 WXP40 Wendeplatten - Walter Tools
Benefit from the combination of stable chip formation, uncoated carbide performance (WXP40) and a dedicated 1R‑F57 chipbreaker to keep drilling and boring cycles consistent and productive; order directly via Metav Werkzeuge or consult our technical advisors for application matching. P4840C-1R-F57 WXP40 – Drilling/boring indexable insert by Walter Tools, 1R‑F57 chipbreaker P4840C-1R-F57 WXP40 is an indexable insert engineered for drilling and bore‑enlargement tasks in industrial production, offering a balance of tool life and chip control for demanding machining operations. Uncoated carbide grade WXP40 1R‑F57 chipbreaker for controlled chips Designed for drilling and boring operations Walter Tools series with stable cutting edge Precision and material suitability for consistent machining The insert is produced in the WXP40 grade, an uncoated carbide variant intended for versatile use across a range of workpiece materials; the specific suitability must be verified against the product matrix to match the application precisely. Thanks to the geometry coded in P4840C‑1R‑F57, the component is optimised for bore turning and drilling operations where predictable cutting behaviour is required. The combination of grade and geometry provides a reliable compromise between tool life and cutting performance, reducing unscheduled tool changes and contributing to overall process efficiency. Controlled chips and productivity gains from the chipbreaker The 1R‑F57 chipbreaker is designed to break and evacuate chips reliably during drilling and reaming operations, improving surface finish and reducing the risk of tool or workpiece damage from long, entangling swarf. In production terms this leads to fewer interruptions, more stable cycle times and a measurable improvement in throughput. The insert’s geometry promotes stable chip formation, which in turn supports repeatable surface integrity and dimensional control — key factors in machining chains that demand consistent part quality. Practical integration, handling and purchasing guidance The insert fits into standard drilling and boring tool systems compatible with the P4840C family designation; compatibility should be confirmed with the holder manufacturer and the product matrix. As the grade is catalogue‑dependent, customers are advised to request application data for the intended workpiece and cutting parameters. For further specification checks or recommendations on toolholders and cutting data, please contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. This advisory route ensures the chosen insert provides the anticipated process security and surface quality in the target application. Contact Metav Werkzeuge today for application advice and to request a tailored quotation for the Walter Tools P4840C-1R-F57 WXP40 drilling/boring indexable insert, including delivery options and technical support Technical data SKU: P4840C-1R-F57-WXP40-WALTER Designation: P4840C-1R-F57 WXP40 Product type: Drill/boring indexable insert Core specifications Grade: WXP40 Chipbreaker: 1R‑F57 Coating: uncoated carbide Features & materials Series: Walter Schneidstoffsorte - Serie offen Material information: Katalogabhängig Application note: Verify workpiece suitability against product matrix FAQ What materials is this insert suitable for? The P4840C‑1R‑F57 WXP40 is specified as an uncoated carbide insert; suitability for particular materials must be checked against the product matrix provided by Walter Tools to ensure the correct match for the intended workpiece. Is the P4840C‑1R‑F57 WXP40 coated? No, the Walter Tools grade WXP40 is offered as uncoated carbide in this designation, which can be advantageous for certain cutting conditions and chip formation behaviours. What benefit does the 1R‑F57 chipbreaker provide? The 1R‑F57 chipbreaker promotes controlled chip segmentation and evacuation during drilling and boring, improving surface finish, tool life and process stability in continuous machining operations. Can this insert be used with standard toolholders? The insert follows the P4840C family geometry; compatibility with toolholders should be confirmed with the holder manufacturer and by consulting the Walter Tools mounting and clamping specifications to guarantee secure fit and correct cutting angles. What production benefits can be expected from this insert? When applied correctly, the P4840C‑1R‑F57 WXP40 supports stable cutting, predictable chip control and improved throughput, contributing to reduced downtime and consistent part quality in serial drilling and bore enlargement tasks. The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group.
P4840C-2R-E67 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP35S grade and the optimised 2R‑E67 chipbreaker for reliable, high‑productivity drilling and boring of steel and cast iron; order directly via Metav Werkzeuge or request application advice from our consultants. P4840C-2R-E67 WKP35S drilling and boring indexable insert — Tiger·tec Silver grade for steel and cast iron, Walter Tools The P4840C-2R-E67 WKP35S is a drilling and boring indexable insert designed to deliver consistent chip control and long tool life in the machining of steel and cast iron, combining a coated carbide grade with a dedicated chipbreaker geometry for stable performance in production environments. Tiger·tec Silver coating for high productivity Optimised 2R‑E67 chipbreaker geometry Grade WKP35S for steel and cast iron Walter Tools quality and stable cutting edge Maximised productivity through advanced coating and grade selection The combination of the Tiger·tec Silver coating with the WKP35S coated‑carbide grade results in a durable cutting edge that sustains higher cutting speeds and longer intervals between indexings. This yields a measurable improvement in cost per part by reducing downtime for insert changes and by extending effective tool life. For operations where cycle time and repeatability matter, the enhanced wear resistance contributes to more predictable machining windows and fewer process interruptions, supporting a steady production flow and faster throughput. Engineered chip control for safer, cleaner holemaking The 2R‑E67 chipbreaker is engineered to manage the typical chip forms produced when machining ISO group P (steel) and K (cast iron). By promoting controlled chip formation and reliable evacuation, this geometry reduces the risk of chip re-cutting and built‑up edge, which in turn improves surface finish and dimensional stability. For users with mixed production runs, consistent chip control with this insert simplifies machine tool housekeeping and decreases the likelihood of secondary damage to the workpiece or tool holder. Clear material scope and application guidance Designed for the machining of steel and cast iron, the insert aligns with the ISO groups P and K and is optimised for the thermal and abrasive conditions typical of those materials. The grade and coating combination is particularly effective where moderate to high cutting speeds are required and where abrasive wear from cast components is a concern. For processes outside these groups—such as austenitic or martensitic stainless steels—selection should be reviewed against material specifics to ensure the most suitable grade is chosen. Practical handling and integration into tool systems As an indexable insert, the component offers multiple cutting edges that can be rotated to restore fresh geometry, reducing tooling costs per edge. The insert is compatible with standard toolholders designed for the P4840C geometry; correct seating and clamping are essential for optimal thermal transfer and repeatable results. Technical consultation is available for process integration and grade selection to match feed, speed and depth‑of‑cut requirements, helping to align the insert’s strengths with the machining task at hand. For tailored advice on implementing the Tiger·tec Silver WKP35S solution in a production setting, contact Metav Werkzeuge for application support and order coordination: info@metav-werkzeuge.com — +49 2822 7131930 Technical Data Article number: P4840C-2R-E67-WKP35S-WALTER Type: drilling/boring indexable insert ISO designation: P4840C-2R-E67 WKP35S Grade: WKP35S Series: Tiger·tec Silver Facts ISO material groups: P (steel), K (cast iron) Chipbreaker: 2R‑E67 Material family of insert: coated carbide Special features Coating: Tiger·tec Silver Geometry: optimised chip control for holemaking Typical applications: drilling and boring in steel and cast iron Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The insert is intended for machining steel and cast iron (ISO groups P and K) and the WKP35S grade is optimised for the thermal and wear characteristics of those materials. How does the 2R‑E67 chipbreaker improve machining? The 2R‑E67 chipbreaker promotes controlled chip formation and evacuation, reducing built‑up edge and supporting improved surface finish and dimensional stability during drilling and boring. Is the Tiger·tec Silver coating beneficial for high cutting speeds? Yes, the Tiger·tec Silver coating enhances wear resistance and edge stability, allowing for increased cutting speeds and longer intervals between insert changes when machining steel and cast iron. Can this insert be indexed to use multiple edges? Yes, the insert is designed for indexing; rotating to a fresh cutting edge restores geometry and extends usable tool life, reducing tooling costs per part. Which supplier should be contacted for application support or orders? Metav Werkzeuge can provide application guidance and order handling for the Walter Tools insert; contact details are provided for consultation and selection. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered marks are mentioned solely for clarification of compatibility and application; there is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
P4840C-2R-E67 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating and the WSP45G grade for robust chip control and edge stability in drilling and boring operations; the insert’s versatility across steel, stainless steel and heat-resistant alloys supports higher uptime and fewer tool changes. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. P4840C-2R-E67 WSP45G drilling/boring indexable insert by Walter Tools — Tiger·tec Gold PVD coated, 2R‑E67 chipbreaker The P4840C-2R-E67 WSP45G is a coated cemented‑carbide indexable insert engineered for demanding drilling and boring tasks, offering predictable chip formation and consistent cutting-edge performance across a wide range of materials. *Tiger·tec Gold PVD coating *Versatile for Steel, Stainless and Superalloys *Stable cutting edge for demanding operations *Coated cemented carbide for long tool life Reliable edge stability for uninterrupted production The combination of the Tiger·tec Gold coating and a coated cemented‑carbide substrate delivers edge stability that preserves dimensional accuracy under thermal and mechanical stress. This stability reduces the frequency of regrinds and adjustments, which translates directly into improved process reliability and fewer interruptions on the shop floor. The metallurgical design of the grade promotes a stable cutting edge even in operations that generate elevated temperatures, supporting consistent hole quality and repeatable results. Predictable chip control for safer machining Equipped with the 2R‑E67 chipbreaker, the insert provides controlled chip formation that eases evacuation during drilling and boring. Predictable chip behaviour lowers the risk of chip jamming and reduces surface damage, improving both operator safety and workpiece finish. The chipbreaker geometry is optimised to guide chips away from the cutting zone, which helps maintain a constant cutting load and extends the insert’s effective life in production environments. Broad material capability to cut tool changes The insert is specified for ISO groups P, M, S, making it suitable for a broad spectrum of materials: unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. This material flexibility minimises tool changes across mixed‑material production runs, streamlining tooling logistics and lowering machine downtime. For job shops and production lines that handle diverse alloys, the grade’s versatility supports faster throughput and more consistent cycle times. Practical productivity gains and process security Designed with workshop productivity in mind, the insert’s WSP45G grade emphasises toughness and wear resistance to withstand intermittent and continuous cutting forces. The result is fewer unplanned tool changes and enhanced process security for high‑volume or serial drilling and boring tasks. Combined with Walter Tools’ manufacturing tolerances, the insert contributes to reproducible machining outcomes and predictable maintenance intervals, which are essential for efficient production planning. Contact Metav Werkzeuge for availability and application advice on Walter Tools Tiger·tec Gold inserts — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss the best setup for specific materials and machining conditions Technical data Article number: P4840C-2R-E67-WSP45G-WALTER SKU: P4840C-2R-E67-WSP45G-WALTER Product type: drilling/boring indexable insert Grade: WSP45G Series: Tiger·tec Gold Facts No numerical specifications provided in the dataset Special features Coating technology: Tiger·tec Gold (PVD) Chipbreaker: 2R‑E67 Substrate: coated cemented carbide Material groups: P (steel), M (stainless steel), S (superalloys / titanium) Suitable for demanding drilling and boring applications Manufacturer: Walter Tools FAQ What materials can be machined with this insert? The P4840C‑2R‑E67 WSP45G insert is suitable for steel, stainless steel and heat‑resistant superalloys/titanium (ISO groups P, M, S), offering broad applicability across mixed‑material production. How does the 2R‑E67 chipbreaker improve performance? The 2R‑E67 chipbreaker produces predictable, compact chips that evacuate reliably during drilling and boring, reducing chip congestion and improving surface finish and tool life with Walter Tools inserts. Is WSP45G a wear‑resistant grade? Yes, WSP45G is a PVD‑coated cemented‑carbide grade optimised for toughness and wear resistance, helping to maintain cutting‑edge integrity in demanding operations. Can the insert be used for high‑temperature alloys like titanium? The insert’s specification for ISO group S indicates suitability for heat‑resistant superalloys and titanium, where its coating and substrate combine to resist thermal and mechanical stress. What production advantages does Tiger·tec Gold provide? The Tiger·tec Gold coating provides enhanced thermal stability and wear resistance, which supports longer tool life and more consistent machining results in serial drilling and boring tasks. Manufacturer/Responsible: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is original, factory‑new goods of the manufacturer.
P4840C-2R-E67 WXP40 Wendeplatten - Walter Tools
Take advantage of the proven combination of a WXP40 uncoated carbide grade and the 2R-E67 chipbreaker for consistent chip control and reliable drilling performance; order directly via Metav Werkzeuge or consult our specialists for application matching. P4840C-2R-E67 WXP40 — drill/boring indexable insert by Walter Tools P4840C-2R-E67 WXP40 is a drill/boring indexable insert designed for precision chip control and economical machining in a wide range of general workshop applications Uncoated carbide grade WXP40 2R-E67 chipbreaker geometry Walter toolholder compatibility Stable chip formation across materials Productivity through controlled chip formation The insert’s defining feature is the 2R-E67 chipbreaker, a geometry engineered to produce short, controllable chips during drilling and boring operations. Controlled chips reduce interruption, ease chip evacuation and lower the risk of tool or workpiece damage, which directly improves process stability and uptime. For production environments that prioritise throughput, this geometry helps maintain consistent cycle times and reduces secondary operations caused by poor chip control. Robust uncoated carbide for flexible use Built in the WXP40 grade, the cutting material is an uncoated carbide (hardmetal) optimised within Walter’s open series. Uncoated carbides offer predictable edge behaviour and are often preferred where coating interactively affects cutting temperatures or adhesion. Material suitability should be verified against the product matrix; when matched correctly, this grade provides a cost-efficient balance between wear resistance and fracture toughness for many common machining tasks. Practical fit and workshop advantages As an insert intended for drilling and boring applications, the design permits quick index changes and repeatable seating in compatible toolholders, supporting lean tool management and reduced setup times. The designation without grade (P4840C-2R-E67) and the ISO-style marking facilitate inventory control and traceability. Where replacement speed and reliable seating are important, choosing an insert with a standardised geometry and grade simplifies logistics and supports continuous production. For selection advice on Walter Tools inserts such as the WXP40 grade and for confirmation of suitability in specific machining tasks, contact Metav Werkzeuge GmbH by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our consultants will assist with application matching and toolholder compatibility. Technical Data SKU: P4840C-2R-E67-WXP40-WALTER Designation: P4840C-2R-E67 WXP40 ISO designation: P4840C-2R-E67 WXP40 Product type: drill/boring indexable insert Manufacturer: Walter Tools Grade: WXP40 Chipbreaker: 2R-E67 Material information: Katalogabhängig Facts No numerical specifications provided in the source data Special features Uncoated carbide (WXP40) according to series description Series: Walter Schneidstoffsorte - Serie offen Application note: check product matrix for material suitability Designation without grade: P4840C-2R-E67 Wendeplatte ISO designation included: P4840C-2R-E67 WXP40 FAQ What materials is this insert intended for? The P4840C-2R-E67 WXP40 insert is an uncoated carbide grade intended for a broad material range; suitability must be checked against the product matrix and machining parameters for the specific workpiece material. Is the WXP40 grade coated? No — WXP40 is described as an uncoated carbide grade in the series description, offering predictable edge behaviour in many drilling and boring tasks. What does the 2R-E67 designation indicate? The 2R-E67 reference denotes the chipbreaker geometry and specific insert form; this geometry is optimised for short, controlled chips and stable evacuation during drilling operations. Will this insert fit standard Walter toolholders? The insert is presented by Walter Tools and is intended for use with compatible Walter drill and boring systems; confirm seat and clamping compatibility with the toolholder specification prior to use. Can this insert be used for high-speed machining? High-speed suitability depends on application parameters and machine capability; refer to Walter Tools’ recommendations and the product matrix for guidance on cutting speeds and feeds with the WXP40 grade. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Walter Tools is mentioned for explanatory purposes; the item offered is an original, factory-new product of the manufacturer. There is no affiliation between our company and the named brands.
P4840C-2R-E77 WN15 Wendeplatten - Walter Tools
Take advantage of a combination of precise chip control and robust uncoated carbide performance for reliable drilling and boring operations; the controlled-chip geometry reduces interruption time and supports consistent cycle output. Order the insert directly via Metav Werkzeuge or consult the specialists if further application data is required. P4840C-2R-E77 WN15 — Drill/Boring Indexable Insert with 2R‑E77 Chipbreaker, Walter Tools P4840C-2R-E77 WN15 is a purpose-built indexable insert for drilling and boring tasks, offering a dedicated chipbreaker and an uncoated cemented carbide grade for general cutting applications. Uncoated cemented carbide WN15 grade 2R‑E77 chipbreaker for controlled chips Designed for drilling and boring operations Catalogue-dependent material specification Stable chip control for fewer interruptions The insert’s 2R‑E77 chipbreaker is engineered to create short, controllable chips that reduce the risk of clogging during through-hole and blind-hole operations. This geometric feature improves process stability and minimises unplanned stoppages, leading to more predictable cycle times. As a result, tool change frequency and secondary handling are reduced, which supports a smoother production flow and higher machine utilisation. Proven cutting material with broad applicability Equipped in the WN15 grade – an uncoated cemented carbide – the cutting edge provides a balance between wear resistance and toughness suitable for many general machining tasks. The uncoated carbide offers predictable wear behaviour and can perform well in stable cutting conditions. Material compatibility must be confirmed against the supplier’s product matrix, since cutting potential depends on workpiece material and cutting parameters; this ensures the chosen grade meets the required service life and surface finish expectations. Practical integration into machining routines The insert geometry and designation make it straightforward to plan tooling for drilling and boring operations: the format aligns with common clamping and indexable systems, facilitating inventory management and quick replacement. With a clear designation and chipbreaker type, process engineers can match cutting data to the insert’s characteristics and validate feeds and speeds experimentally. The product specification notes that the material specification is catalogue-dependent, so selection should be verified for the intended application to achieve consistent results. For targeted application advice or to secure the P4840C-2R-E77 WN15 inserts from Walter Tools, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P4840C-2R-E77-WN15-WALTER Designation: P4840C-2R-E77 WN15 Product type: Drill/boring indexable insert Manufacturer: Walter Tools Material specification: Catalogue-dependent Chipbreaker: 2R‑E77 Measured values SKU: P4840C-2R-E77-WN15-WALTER Grade: WN15 (uncoated cemented carbide) Series: Walter Schneidstoffsorte - Serie offen Application note: Check product matrix for material suitability Special features Uncoated cemented carbide grade WN15 2R‑E77 chipbreaker for controlled chip formation Intended for drilling and boring operations Suitability: verify against product matrix for specific materials Format suited to standard indexable insert systems FAQ What materials is this insert suitable for? Material suitability depends on the specific application matrix; the P4840C-2R-E77 WN15 insert is delivered in the uncoated WN15 carbide grade and requires verification against the supplier’s matrix to confirm suitability for a given workpiece material. How does the 2R‑E77 chipbreaker improve drilling performance? The 2R‑E77 chipbreaker produces controlled, short chips that reduce clogging risk and interruptions during drilling and boring, resulting in more stable cycles and fewer tool-related stoppages for the P4840C-2R-E77 WN15 cutting insert. Is the carbide grade coated or uncoated? The WN15 grade used in this insert is an uncoated cemented carbide, offering consistent wear behaviour appropriate for general cutting tasks when matched with correct cutting parameters. Can this insert be used for both drilling and reaming operations? The insert is specified for drilling and boring operations; suitability for reaming should be assessed based on the machining strategy and the product matrix for the WN15 grade. How should material compatibility be checked before use? Compatibility should be confirmed by consulting the technical product matrix provided by the manufacturer and by conducting validation cuts under the intended machining conditions for the P4840C-2R-E77 WN15 insert. Hersteller: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand Walter Tools) is part of a global group. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for clarification. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
P4840C-2R-E77 WNN15 Wendeplatten - Walter Tools
Benefit from the combination of the WNN15 coated carbide grade and the 2R‑E77 chipbreaker for reliable chip control and longer tool life; order the inserts directly via Metav Werkzeuge or consult our technical team for application advice. P4840C-2R-E77 WNN15 indexable insert for drilling and boring – Walter Tools The P4840C-2R-E77 WNN15 is an indexable insert engineered for drilling and boring operations, providing controlled chip formation and suited to applications defined in the product matrix Coated carbide grade WNN15 Chipbreaker 2R‑E77 for chip control Designed for drilling and boring operations Walter Tools quality and consistency Consistent chip control for uninterrupted production The insert features the 2R‑E77 chipbreaker, a geometry developed to promote predictable chip control during drilling and bore enlargement. This design reduces the risk of chip packing and cutting interruptions so that cycle times remain stable. Built on a coated carbide substrate, the grade delivers a balance between wear resistance and fracture toughness; as a consequence, machining is more reliable and downtimes are reduced. For correct material matching, the product matrix should be consulted to confirm the most economical and technically suitable cutting data. Higher productivity through proven coating and grade performance With the WNN15 coating and substrate combination, the insert aims to extend tool life and improve surface integrity on machined bores. The coating assists in thermal protection and wear resistance, which in turn sustains cutting conditions over longer runs. When used with appropriate feed and speed settings, the result is a consistent surface finish and fewer tool changes per shift. Process planners will appreciate the predictable performance that supports higher throughput and lower unit costs, with the insert geometry enabling secure seating and repeatable indexing. Easy integration and clear application guidance The indexable design simplifies handling and replacement within standard drilling tool holders; the insert is compatible with systems specified for this geometry and size. While the insert is engineered for general drilling and boring duties, suitability for particular workpiece materials must be verified against the technical data matrix included with the product. Technical specification and clamping guidance are provided to ensure process reliability and repeatable results, and the component is intended for integration into productive machining cells where predictable chip formation and tool life are priorities. For tailored application advice or to obtain genuine Walter Tools inserts, contact Metav Werkzeuge for detailed recommendations and rapid availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number / SKU: P4840C-2R-E77-WNN15-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4840C-2R-E77 WNN15 Walter Tools Product type: Indexable insert for drilling and boring Facts Grade designation: WNN15 Chipbreaker: 2R‑E77 Series: Walter Schneidstoffsorte - Serie offen Special features Coated carbide grade WNN15 Chip control geometry Designed for drilling and boring operations Material information: Katalogabhängig FAQ Which materials is this insert suitable for? The insert's WNN15 coated carbide grade is designed for a broad range of applications; specific workpiece suitability must be checked in the product matrix for the P4840C-2R-E77 WNN15 insert. What is the purpose of the 2R‑E77 chipbreaker? The 2R‑E77 chipbreaker promotes predictable chip formation during drilling and boring, reducing the likelihood of chip entanglement and supporting continuous machining. Can this insert be used for both drilling and bore enlargement? Yes, the geometry and designation indicate suitability for drilling and boring operations when mounted in compatible holders and used with recommended cutting data. How does the coating affect tool life and performance? The coated carbide composition of WNN15 improves wear resistance and thermal stability, which helps maintain cutting performance and extend tool life under appropriate machining conditions. How is the insert designated for ordering and identification? The full designation appears as P4840C‑2R‑E77 WNN15 (SKU P4840C-2R-E77-WNN15-WALTER) to ensure correct selection of grade, chipbreaker and series. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is an original, brand-new product from the manufacturer Walter Tools.
P4840C-2R-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the proven Tiger·tec Silver coating and the WKP35S grade for consistent wear resistance and controlled chip formation; order the insert through Metav Werkzeuge or contact the sales team for tailored machining advice. P4840C-2R-F57 WKP35S drilling/bore-enlargement indexable insert by Walter Tools — Tiger·tec Silver, for steel and cast iron The P4840C-2R-F57 WKP35S is an indexable insert designed for drilling and bore-enlargement operations, optimised for machining steel and cast iron with stable cutting behaviour Tiger·tec Silver coating for extended tool life WKP35S grade for steel and cast iron machining 2R‑F57 chipbreaker for reliable chip control Precision designation P4840C‑2R‑F57 for consistent geometry Higher productivity through optimised coating and grade The combination of the Tiger·tec Silver coating and the WKP35S grade delivers measurable gains in wear resistance and process stability when machining steels and cast irons. The advanced coating reduces flank wear and helps maintain cutting-edge integrity over longer tool life, which translates into fewer index changes and less machine downtime. For operations where repeatability and predictable tool change intervals are essential, this insert supports a more economical cycle time and improved tool utilisation. Predictable chip behaviour and surface quality Equipped with the 2R‑F57 chipbreaker, the insert is engineered to produce short, controllable chips that improve evacuation and reduce the risk of built-up edge. Effective chip control minimises interruptions during through-hole and enlarging passes and contributes to a consistent surface finish on mating bores. For those less familiar with chipbreaker geometry: the designation describes the rake and groove form tailored to break and guide chips away from the cutting zone, reducing thermal concentration and preserving dimensional stability. Practical selection and workshop guidance for better results Selection of the correct insert grade and geometry is decisive for a productive process. The P4840C‑2R‑F57 design is suited to the machining conditions typical for unalloyed and alloyed steel (ISO group P) and abrasive cast iron (ISO group K), offering broad applicability across mixed-series production. Technical advice and practical feed/speed recommendations are available from Metav Werkzeuge to align insert choice with machine capability and workpiece requirements, ensuring efficient implementation without trial-and-error. For machining steel and cast iron with enhanced tool life and controlled chips, request the P4840C-2R-F57 WKP35S from Metav Werkzeuge — benefit from Tiger·tec Silver performance; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for precise technical guidance Technical data Article number: P4840C-2R-F57-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4840C-2R-F57 WKP35S Walter Tools Manufacturer: Walter Tools Core data Grade: WKP35S Material groups: P / K (steel / cast iron) Series: Tiger·tec Silver Chipbreaker: 2R‑F57 Designation: P4840C-2R-F57 Special features Coating technology: Tiger·tec Silver Coated carbide grade WKP35S Optimised for steel and cast iron machining Stable chip formation and predictable wear behaviour Application: drilling and bore enlargement indexable insert FAQ What materials is this insert best suited for? The P4840C-2R-F57 WKP35S insert from Walter Tools is intended primarily for steel (ISO group P) and cast iron (ISO group K) applications, reflecting the WKP35S grade’s balanced performance for both material groups. How does the Tiger·tec Silver coating improve performance? Tiger·tec Silver reduces adhesive and abrasive wear on the cutting edge of the P4840C-2R-F57 WKP35S, extending effective tool life and helping to maintain dimensional stability during extended runs. What advantage does the 2R‑F57 chipbreaker provide? The 2R‑F57 chipbreaker is designed to create short, manageable chips during drilling and bore enlargement, improving evacuation and reducing the likelihood of chip-related interruptions or damage to the workpiece. Can this insert be used for mixed-series production? Yes, the WKP35S grade and the insert geometry of the P4840C-2R-F57 are suitable for mixed-series production involving various steels and cast irons, delivering consistent results across different batches. How is the insert identified in stock and on drawings? Identification is via the ISO-style designation and SKU: P4840C-2R-F57 WKP35S (SKU P4840C-2R-F57-WKP35S-WALTER), which matches catalogue entries and technical drawings for straightforward ordering. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer.
P4840C-2R-F57 WSP45G Wendeplatten - Walter Tools
Benefit from a combination of durable Tiger·tec Gold PVD coating and versatile material compatibility for reliable drilling and boring across steel, stainless steel and superalloys. The robust 2R-F57 chipbreaker ensures controlled chip formation and consistent cutting-edge stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. P4840C-2R-F57 WSP45G — Indexable drill/reaming insert, Tiger·tec Gold PVD, Walter Tools A P4840C-2R-F57 WSP45G indexable insert engineered for drilling and boring operations in mixed materials, offering high wear resistance and stable chip control for productive machining Tiger·tec Gold PVD coating for extended tool life Suited for steel, stainless steel and superalloys 2R-F57 chipbreaker for controlled chip formation Walter Tools quality with stable cutting edge Reliable performance across mixed materials This indexable insert is tailored for demanding drilling and reaming tasks where material diversity requires adaptable tool behaviour. The WSP45G grade is a PVD-coated carbide specifically formulated for balanced toughness and wear resistance, which translates into longer service intervals and predictable tool life when machining steel, stainless steel and superalloys. By combining coating hardness with substrate toughness, the design reduces flank wear and supports stable process windows, allowing planners to maintain steady feeds and speeds without frequent interruptions. Controlled chip formation for safer machining The integrated 2R-F57 chipbreaker promotes efficient chip segmentation and evacuation during holemaking, reducing the risk of chip-related tool damage and workpiece surface defects. Improved chip control lowers the likelihood of recutting and leads to more consistent hole quality, which is particularly valuable in automated setups and multi-pass operations. The practical effect is fewer stoppages for chip clearing and a more reliable production rhythm, supporting higher uptime and predictable output. Coating technology that boosts productivity The Tiger·tec Gold coating system enhances thermal resistance and wear protection under the heat loads typical of drilling and boring. This PVD layer minimises adhesion and abrasive wear at the cutting edge, allowing for productive cutting parameters and extended edge life. For engineers focused on cost-efficiency, the result is a better tool-life-to-cost ratio and reduced tooling changes, which can pay off across medium to long production runs. Easy integration and repeatable results As an indexable cutting solution, this insert integrates with standard drill and boring holders, offering repeatable indexation and quick replacement of cutting edges. The combination of a stable cutting geometry and a reliable grade ensures consistent surface finish and dimensional accuracy over multiple tool changes. Process planners will value the workpiece-to-workpiece repeatability that supports tight tolerances and lowers scrap rates. For demanding drilling and boring tasks, choose the Walter Tools Tiger·tec Gold grade and contact Metav Werkzeuge for tailored application advice or to secure supply through our distribution network Technical data SKU: P4840C-2R-F57-WSP45G-WALTER Article label: Bohr-/Aufbohrwendeschneidplatte P4840C-2R-F57 WSP45G Walter Tools Product type: Indexable drill/reaming insert Grade: WSP45G Facts ISO designation: P4840C-2R-F57 WSP45G Material groups: P / M / S Chipbreaker: 2R-F57 Special features Coating: Tiger·tec Gold (PVD) Substrate: coated carbide Intended application: drilling and boring in steel, stainless steel and heat-resistant alloys Series: Tiger·tec Gold Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P4840C-2R-F57 WSP45G insert is suitable for machining steel, stainless steel and superalloys (material groups P, M and S) as indicated by its WSP45G grade and Tiger·tec Gold coating. How does the 2R-F57 chipbreaker benefit holemaking? The 2R-F57 chipbreaker promotes controlled chip segmentation and evacuation, improving process stability and reducing the risk of chip-related damage during drilling and reaming. Is the coating corrosion resistant? The Tiger·tec Gold PVD coating increases thermal and wear resistance at the cutting edge; its primary role is to reduce adhesive and abrasive wear rather than to serve as a corrosion protection layer. Can the insert be used in automated cell production? Yes, the indexable insert design and repeatable indexation make it suitable for automated machining environments where consistent tool performance and quick edge changes are required. What performance improvements can be expected compared with uncoated grades? Compared with uncoated carbide, the WSP45G PVD coating typically yields longer edge life and more stable cutting behaviour, enabling more aggressive cutting parameters and reduced tool-change frequency. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com