P3204-D32 WSM36G WSM36G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold thermal stability and the WSM36G grade’s reliable chip formation to maintain consistent, productive milling of rostfreier Stahl and high-temperature alloys; the insert’s D32 chipbreaker supports controlled swarf evacuation and long edge life. Order the P3204-D32 WSM36G milling insert directly via Metav Werkzeuge or ask our consultants if needed. P3204-D32 WSM36G milling indexable insert – Tiger·tec Gold for rostfreier Stahl (Walter Tools) The P3204-D32 WSM36G is a coated carbide milling indexable insert designed for high-stress machining of rostfreier Stahl and heat-resistant alloys, offering stable cutting edges and predictable chip behaviour Tiger·tec Gold coating for enhanced heat resistance Robust WSM36G grade for rostfreie Stähle and superalloys Optimised chip control with D32 chipbreaker geometry Suitable for productive high-stress milling applications High thermal stability for continuous metal removal The combination of the Tiger·tec Gold coating and a coated carbide substrate gives the insert a markedly increased resistance to thermal softening during demanding operations. This leads to consistent cutting-edge integrity and fewer unexpected tool changes, which supports uninterrupted production routines. The engineered surface finish of the coating helps reduce built-up edge formation when machining rostfreier Stahl, so forces remain stable and component quality is predictable. Controlled swarf evacuation and reduced rework The D32 chipbreaker geometry delivers defined chip segmentation and evacuation, improving surface consistency and reducing the risk of recutting chips. Enhanced chip control lowers the probability of edge damage when removing material from tough alloys, including superalloys and titanium grades identified under ISO 513 group S. This targeted geometry therefore reduces secondary operations and contributes to measurable time savings per component, especially in repeated milling cycles. Built for productivity with repeatable performance As a member of the Tiger·tec Gold series, the WSM36G grade balances wear resistance and edge toughness to extend tool life under mixed cutting conditions. The insert supports higher process stability when alternating between interrupted cuts and long engagement passes, helping to keep cycle times low and quality high. Where process reliability is critical, the Walter Tools design promotes predictable results and fewer scrapped parts, delivering tangible benefits across batch and job-size variations. Contact Metav Werkzeuge to specify a Walter Tools P3204-D32 WSM36G insert for rostfreier Stahl machining, discuss application limits or request tailored cutting-parameter guidance; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical Data SKU: P3204-D32-WSM36G-WALTER Article designation: P3204-D32 WSM36G Product type: milling indexable insert Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSM36G Facts Chipbreaker designation: D32 Applicable material groups: M, S Material group designation: S / M Designation without grade: P3204-D32 Special features Coating: Tiger·tec Gold Carbide type: coated carbide Suitable for rostfreier Stahl Suitable for high-temperature alloys and titanium Brand: Walter Tools FAQ What materials is this insert designed for? The P3204-D32 WSM36G insert is intended for rostfreier Stahl and heat-resistant superalloys (ISO groups M and S), offering stable chip formation and edge life in these materials. How does the Tiger·tec Gold coating benefit milling? The Tiger·tec Gold coating on the WSM36G grade increases thermal resistance and reduces built-up edge, improving consistency and extending the insert’s service life during continuous milling. What role does the D32 chipbreaker play? The D32 chipbreaker geometry provides controlled chip segmentation and evacuation, enhancing surface finish and lowering the risk of recutting chips in demanding milling operations. Is the WSM36G grade suitable for interrupted cuts? Yes. The WSM36G grade combines toughness with wear resistance, making it suitable for intermittent engagement and variable load conditions commonly encountered in roughing and semi-finishing. Can this insert improve overall process reliability? When integrated with appropriate parameters, the P3204-D32 WSM36G insert contributes to predictable cutting forces, fewer edge failures and improved process stability for rostfreier Stahl and superalloys. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
P3204-D32 WSP46G WSP46G Wendeplatten - Walter Tools
Combine durable Tiger‑tec Gold coating with the WSP46G grade for extended tool life and reliable chip control; benefit from the D32 chipbreaker for stable milling of Stahl, rostfreier Stahl and high‑temperature alloys. Order directly via Metav Werkzeuge or consult our specialists for application advice. P3204-D32 WSP46G milling indexable insert – Tiger‑tec Gold, D32 chipbreaker (Walter Tools) A P3204-D32 WSP46G milling insert designed for robust milling operations across a wide range of materials, offering durable coated‑carbide performance for general and demanding milling tasks. Tiger‑tec Gold PVD coating WSP46G tough, versatile grade D32 chipbreaker for stable chip control Suitable for Stahl, rostfreier Stahl and superalloys Longer tool life through advanced coating and grade The combination of Tiger‑tec Gold and the WSP46G grade delivers a PVD‑reinforced surface that improves wear resistance and extends tool life under cyclic thermal and mechanical loads. As a coated carbide solution, this insert maintains a consistent cutting edge where uncoated grades tend to wear faster; the coating reduces adhesion and thermal impact, which translates into fewer indexings and more productive milling cycles. The result is predictable performance and lower intervention frequency in serial production. Reliable machining across demanding material groups Designed for the P/M/S spectrum, the insert supports machining of Stahl, rostfreier Stahl and superalloys including titanium components. Each material group imposes different challenges — from tough chip formation in Stahl to the heat sensitivity of rostfreier Stahl and the poor thermal conductivity of high‑temperature alloys. The chosen grade focuses on heat resistance and a stable cutting edge, making it possible to maintain cutting integrity where temperature and adhesion would otherwise shorten tool life. Stable process and reduced downtime with the right geometry The D32 geometry offers controlled chip breaking and evacuation, lowering the risk of built‑up edge and tool overload during interrupted cuts. As an indexable insert, handling and replacement are straightforward, supporting quick changeovers and consistent seating in the cutter body. Backed by Walter Tools production standards, this format helps to secure process reliability and repeatable surface quality, which is particularly beneficial in high‑mix and batch production environments. Contact Metav Werkzeuge today to discuss how Walter Tools Tiger‑tec Gold inserts can improve milling throughput and process stability – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: P3204-D32-WSP46G-WALTER Label: Fräswendeschneidplatte P3204-D32 WSP46G Walter Tools Manufacturer: Walter Tools Product type: milling indexable insert Grade: WSP46G Series: Tiger‑tec Gold Chipbreaker: D32 Materials: P / M / S ISO designation: P3204-D32 WSP46G UID: P3204-D32-WSP46G-WALTER Facts No additional numerical data provided Special features Coating: Tiger‑tec Gold (PVD) Material: coated carbide (beschichtetes Hartmetall) Grade intended for versatile milling applications Suitable for machining Stahl, rostfreier Stahl and superalloys FAQ What materials is this insert suited for? The P3204‑D32 WSP46G insert is formulated for machining Stahl, rostfreier Stahl and selected superalloys and titanium‑based materials, matching the P/M/S classification. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold provides a PVD protective layer that improves wear resistance, reduces adhesion and supports stable cutting edges during high thermal loads when using the WSP46G grade. What advantage does the D32 chipbreaker bring? The D32 geometry produces short, controllable chips and improves evacuation, which reduces rework and the likelihood of built‑up edge in milling operations. Is this insert compatible with standard milling cutter bodies? The P3204‑D32 WSP46G follows common indexable insert formats for milling; compatibility depends on the cutter body pocket and clamping arrangement used in the machine tool. Can the insert be used for high‑speed finishing? The coated WSP46G grade is balanced between toughness and wear resistance; finishing at higher speeds is possible depending on workpiece material, machine rigidity and cutting parameters. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Trademarks and trade names mentioned are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer. Walter Tools is part of the Walter AG organisation and is recognised for its precision tool solutions within the Sandvik group.
P40519-M10 P40519-M10 M10 Wendeplatten - Walter Tools
P40519-M10 combines proven thread geometry and reliable performance for stable turning processes; ideal where consistent M10 thread quality and predictable tool life are priorities. Order through Metav Werkzeuge or consult their advisors for application-specific recommendations. P40519-M10 Threading Insert, M10 Thread — Walter Tools P40519-M10 is a dedicated threading insert engineered for turning operations that produce M10 metric threads, delivering consistent thread form and repeatable process behaviour. Precision M10 thread geometry Stable chip control for consistent cuts Designed for Walter Tools toolholders Fast, repeatable M10 threading for production turning The P40519-M10 threading insert delivers a focused solution for series and single-part turning operations where repeatability matters. Its defined thread geometry supports consistent flank angles and root form, which reduces rework and shortens cycle time per part. Specified for M10 metric threads, the component is a purpose-made element for turning tool assemblies and fits standard threading setups, enabling predictable results across batches while supporting higher process throughput. Optimised cutting geometry for controlled chip formation A primary benefit of this insert is its emphasis on chip control and cutting-edge stability. The insert geometry guides chips away from the cutting zone, reducing the risk of recutting and surface damage. Improved chip flow contributes directly to surface finish and helps maintain tool-life. For operations with variable feed or interrupted cuts, the geometry supports stable behaviour and lowers the likelihood of chip-related interruptions, thus improving overall process security. Predictable tool life and low-maintenance handling Designed to support steady productivity, the insert offers a balance between cutting performance and service intervals. Clear edge preparation and material-appropriate design reduce wear rates and enable easier monitoring of tool condition. In production settings this predictability facilitates planning for insert changes and minimises unscheduled stops, which in turn supports cost-effective machining and steady capacity utilisation. Integration into standard turning systems and application guidance The insert is intended for integration in common threading toolholders compatible with Walter Tools inserts; the ISO designation aligns with industry toolset conventions to ease replacement and inventory management. For specific materials, coatings or machining parameters, consult Metav Werkzeuge's technical literature or request tailored setup advice to match cutting speeds and feeds with the chosen workpiece material and machine capability. Contact Metav Werkzeuge today for tailored machining recommendations on Walter Tools threading inserts like the P40519-M10 and to ensure optimal process parameters for consistent M10 threads Technical data Article number: P40519-M10--WALTER Label: Gewindeschneidplatte P40519-M10 Walter Tools Product type: Threading insert Facts Thread size: M10 Series: Not applicable Special features Walter Tools brand ISO designation: P40519-M10 WPL designation without grade: P40519-M10 FAQ What thread size is this insert designed for? The P40519-M10 insert is designed specifically for producing M10 metric threads. What is the ISO designation of the insert? The ISO designation is P40519-M10, which appears on the product documentation and packaging. Is this an original Walter Tools product? This item is an original Walter Tools threading insert supplied under the stated SKU P40519-M10--WALTER. How does the insert control chips during threading? The insert's geometry is optimised for chip formation and evacuation, improving chip flow and protecting the thread flank from recutting. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany All trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no affiliation between our company and the named brands. The offered article is an original, factory-new product of Walter Tools.
P40519-M3 P40519-M3 M3 Wendeplatten - Walter Tools
Benefit from the combination of Walter Tools' manufacturing reliability and the M3 chipbreaker design of the P40519-M3 insert to achieve steady chip control and consistent thread geometry in turning operations. Order the insert via Metav Werkzeuge or consult the technical team for application support. P40519-M3 Thread cutting insert — M3 chipbreaker, Walter Tools A P40519-M3 thread cutting insert for professional thread turning applications, designed to support stable chip formation and repeatable thread profiles. M3 chipbreaker for controlled chip formation Engineered for precise thread cutting performance Compatible with common turning toolholders Original Walter Tools manufacturing quality Controlled chip formation for reliable cycle times The M3 chipbreaker specification describes a geometry engineered to break and evacuate chips consistently during threading. Consistent chip control reduces the risk of entanglement and tool disturbance, which in turn stabilises cycle times and lowers scrap rates. By relying on a defined chip-breaking contour, the insert supports predictable machining conditions that are especially valuable in batch production and repetitive turning tasks. Predictable thread geometry and surface quality A thread cutting insert with a stable cutting edge promotes repeatable thread profiles and improved surface finish. The P40519-M3 offers an economy in process control through a robust insert geometry that helps maintain the intended thread form across several workpieces. For engineers and operators, this translates into fewer in-process adjustments and more consistent part acceptance, supporting quality assurance procedures on the shop floor. Seamless integration into established tool setups Designed as a standard thread cutting insert, the P40519-M3 is intended for use in conventional turning toolholders and clamping systems. This compatibility means minimal changeover effort when replacing worn inserts and straightforward integration into existing machining sequences. The result is reduced downtime during maintenance intervals and a smoother production flow when exchanging inserts in multistation turning cells. Manufacturer reputation and production support Walter Tools is known for supplying precision cutting tools that aim to deliver reproducible performance and secure handling under industrial conditions. Choosing an original Walter Tools insert ensures traceability and access to manufacturer data, which supports process documentation and tool management. The product designation P40519-M3 assists in clear ordering and inventory control when coordinating supplies across production sites. For technical advice or to order genuine Walter Tools P40519-M3 inserts, contact Metav Werkzeuge for application guidance and supply coordination via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P40519-M3--WALTER Label: Gewindeschneidplatte P40519-M3 Walter Tools Product type: Gewindeschneidplatte Designation: P40519-M3 Chipbreaker: M3 Manufacturer: Walter Tools Facts Series: Not applicable Special features Original Walter Tools product Intended for thread cutting in turning applications Standard insert geometry for compatibility with common holders FAQ What applications is the P40519-M3 suitable for? The P40519-M3 thread cutting insert is suitable for professional thread turning applications where controlled chip formation and repeatable thread geometry are required. How does the M3 chipbreaker affect machining? The M3 chipbreaker on the P40519-M3 promotes consistent chip control and evacuation, helping to reduce interruptions and improve process stability during threading. Is the P40519-M3 compatible with common toolholders? Yes, the insert is designed for standard turning toolholder systems and intended for straightforward integration in usual workshop setups. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners. Mention of brand names is for explanation only; there is no affiliation between our company and the named brands. The offered article is an original, factory-new product of the manufacturer.
P40519-M4 P40519-M4 M4 Wendeplatten - Walter Tools
Benefit from precise metric thread machining with a focus on repeatable M4 performance and the reliability of an established tool brand; the compact ISO designation simplifies tool selection and stock keeping. Order directly via Metav Werkzeuge or consult our specialists for integration into production. P40519-M4 threading insert (M4) by Walter Tools — metric thread profile for industrial use A P40519-M4 threading insert intended for precision metric M4 threads in industrial threading and turning applications Metric M4 thread profile Original Walter Tools quality Suitable for industrial threading Precision and process advantage for metric thread production The threading insert is identified by the ISO designation P40519-M4, which enables fast recognition in tool inventories and clear matching to machining plans. The M4 thread profile is a standard metric size commonly used in mechanical assemblies; using a dedicated insert with a defined profile reduces rework and ensures consistent thread form. This leads to measurable process advantages: fewer rejects and steadier cycle times. The ISO code assists purchasing and toolroom staff in maintaining traceability and simplifies replacement logistics. Practical selection and economic operation in production Standardised labelling such as P40519-M4 supports efficient tool management in both batch production and maintenance operations. A compact insert with an explicit thread sort minimises search times and streamlines holder configuration when replacements are required. The specification encourages predictable tool life and scheduling, which improves utilisation rates on lathes and threading units. For operations seeking cost-effectiveness, the combination of simple identification and brand consistency contributes to lower total cost of ownership through reduced stoppages and faster changeovers. Integration into machining workflows and brand assurance Adopting a recognised Walter Tools threading solution supports process stability across repeat jobs and mixed production runs. The insert’s clear designation and compatibility with common threading workflows mean planning engineers can integrate it without lengthy qualification cycles. In addition to the technical fit, the association with a reputable manufacturer provides a degree of operational confidence; documented manufacturing and quality procedures from established toolmakers typically reinforce predictable performance and consistent batch quality, which is valuable for series production and critical assemblies. For detailed advice on integrating the Walter Tools P40519-M4 threading insert into existing tooling systems, contact Metav Werkzeuge by e-mail or phone; our consultants will assist with selection and availability. Technical data Article number: P40519-M4--WALTER Manufacturer: Walter Tools Product type: Threading insert Facts ISO designation: P40519-M4 Thread sort: M4 Series: Not applicable Special features Label: Threading insert P40519-M4 Walter Tools UID: P40519-M4--WALTER FAQ What thread size does this insert produce? The P40519-M4 threading insert produces a metric M4 thread profile and is labelled with the ISO code P40519-M4 for easy identification. How does the ISO designation help in tooling decisions? The ISO designation P40519-M4 simplifies matching to holders and tooling lists, allowing engineers and procurement teams to select the correct insert with confidence. Is this an original Walter Tools component? Yes, the product is an original Walter Tools threading insert; the SKU P40519-M4--WALTER identifies factory-new items. For which applications is this insert suitable? The insert is designed for industrial threading operations where a standard metric M4 profile is required, including series production and maintenance tasks. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P40519-M5 P40519-M5 M5 Wendeplatten - Walter Tools
Take advantage of precise metric thread cutting and reliable chip control provided by the M5 chipbreaker for stable production runs; the design supports consistent thread form and reduces downtime through predictable chip behaviour. Order or request advice directly via Metav Werkzeuge for selection support and availability. P40519-M5 Threading Insert – M5 Chipbreaker, Walter Tools P40519-M5 is a threading insert intended for metric thread cutting in turning applications, offering a focused chipbreaking geometry for repeatable thread profiles. Threading insert P40519-M5 by Walter Tools Chipbreaker M5 for consistent chip control Suitable for metric thread turning Original factory-new insert, reliable edge Precise thread form for repeatable results The P40519-M5 is engineered as a dedicated threading insert to deliver a consistent thread profile cycle after cycle. The integrated chipbreaker M5 promotes uniform chip separation, which reduces the risk of built-up edge and interrupted cuts. For production environments requiring predictable outcomes, the geometry helps maintain the correct pitch and flank form; this translates to fewer rejects and less time spent on rework. The term chipbreaker refers to the insert’s built-in feature that controls how metal is segmented and evacuated during machining, an important factor when cutting metric threads. Efficient machining with controlled chips and less downtime A stable chipflow from the chipbreaker M5 improves process security and contributes to smoother turning operations. Controlled chips mean less manual cleaning of the work area and reduced risk of chip entanglement with the toolholder or workpiece, which in turn supports higher machine uptime. The insert’s design focuses on efficiency: predictable chip shapes aid coolant access and surface finish, while consistent chip evacuation lowers the probability of tool damage. These advantages combine to support a leaner workflow and enhanced productivity on the shop floor. Compatibility guidance and practical selection notes The insert is supplied in the ISO designation P40519-M5, with series information listed as not applicable in the current catalogue data; selection should therefore match the toolholder geometry and pitch requirements of the intended threading operation. When specifying an insert, ensure toolholder compatibility and match the thread form requirements of the component drawing. For customers unfamiliar with threading insert selection, basic checks include thread standard (metric), desired pitch, and holder seat type—matching these factors ensures the insert provides the intended consistent thread quality. For tailored advice on integrating the Walter Tools P40519-M5 threading insert into production workflows, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for technical guidance and availability Technical Data Article number: P40519-M5--WALTER Designation: P40519-M5 Product type: Threading insert Manufacturer: Walter Tools Facts Chipbreaker: M5 Special features Series: Not applicable ISO designation: P40519-M5 Note: No additional catalogue details provided FAQ What is the primary application of this insert? The P40519-M5 threading insert is intended for metric thread cutting in turning applications and is optimised for controlled chip formation using the M5 chipbreaker. Which materials is the insert suitable for? Catalogue data does not specify material ranges; selection should be matched to toolholder and machining conditions, with Walter Tools threading inserts typically used across common engineering steels and allied materials when appropriate grades are chosen. How does the M5 chipbreaker affect production? The chipbreaker M5 creates predictable chip shapes that improve evacuation and reduce built-up edge, supporting stable machining and consistent thread quality with fewer interruptions. Is this an original product from Walter Tools? Yes, this is offered as an original factory-new insert from Walter Tools, supplied under the designation P40519-M5. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
P40519-M6 P40519-M6 M6 Wendeplatten - Walter Tools
Optimise thread production with a dedicated M6 profile and Walter Tools consistency: dependable thread geometry reduces rework and supports steady cycle times. Order genuine inserts or consult Metav Werkzeuge for application advice and supply options. P40519-M6 thread-cutting insert, M6 profile — Walter Tools P40519-M6 is a specialised thread-cutting insert for the production of standard M6 metric threads in industrial turning and threading applications Walter Tools precision geometry Suited for M6 metric threads Optimised for stable cutting performance Consistent thread geometry for fewer rejects The insert delivers a defined thread profile that supports repeatable accuracy across series production. With a geometry tailored to the M6 specification, wear patterns remain predictable, which helps to reduce scrap rates and the need for secondary rework. This results in a more stable process and clearer quality control data for batch manufacturing. Increased throughput through reliable performance A stable cutting edge and predictable behaviour under load contribute directly to higher productivity on the shop floor. Reduced interruptions for insert changes and fewer quality-related stoppages mean machines run longer between tool interventions. The focus on reliable cycle performance supports leaner setup routines and improved overall equipment effectiveness. Clear application scope and handling notes This insert is intended for standard metric thread manufacture of size M6, compatible with typical thread-cutting toolholder systems. The specification emphasises functionality for routine industrial applications where a consistent thread form is required. For optimal results, match the insert to the correct holder type and follow recommended cutting parameters provided by the tooling system manufacturer. Practical guidance and compatibility considerations While material-specific data is not included in the basic product listing, the insert is a practical choice for standard machining tasks that require efficient thread generation. When machining specialised alloys or non-standard workpiece materials, refer to holder guidelines and cutting-parameter tables to maintain surface quality and tool life. Supplementary machining data can be obtained from the tooling supplier to ensure process alignment. For tailored machining advice or to secure genuine Walter Tools P40519-M6 thread-cutting inserts, contact Metav Werkzeuge for application support and availability — Metav Werkzeuge, info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: P40519-M6--WALTER Name: Gewindeschneidplatte P40519-M6 Product type: Gewindeschneidplatte SKU: P40519-M6--WALTER Manufacturer: Walter Tools Facts Thread size: M6 Special features ISO designation: P40519-M6 Series information: Not applicable Sort/grade identifier: M6 FAQ What thread size is the insert designed for? The P40519-M6 thread-cutting insert by Walter Tools is specified for the production of M6 metric threads. Is coating information provided for this insert? The supplied product data does not list a coating for the P40519-M6 insert; further details should be checked with the manufacturer or authorised distributor. Can the insert be used for a variety of materials? No explicit material-application data is included in the basic listing for the P40519-M6; suitability depends on the workpiece material and the chosen cutting parameters. How does this insert affect production stability? The defined profile and consistent geometry of the insert support repeatable thread quality, which contributes to steadier production runs and fewer rejects. Is the P40519-M6 compatible with standard thread-holders? The design is intended for use in common thread-cutting assemblies; compatibility should be confirmed against the specific toolholder catalogue. Walter Tools: Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners and are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is original, factory-new goods of the manufacturer.
P40519-M8 P40519-M8 Nicht zutreffend Wendeplatten - Walter Tools
Take advantage of precise chip control and a clear ISO designation for reliable thread production; the combination of a dedicated M8 chipbreaker and standardised marking simplifies inventory and ordering. Order this item via Metav Werkzeuge or request specialist advice if required. P40519-M8 Threading Insert with M8 Chipbreaker — Walter Tools A compact P40519-M8 threading insert intended for controlled chip formation during metric M8 thread turning operations Threading insert P40519-M8 by Walter Tools M8 chipbreaker for consistent chip control ISO-designated insert for standardised mounting Consistent chip control for safer turning processes The incorporated M8 chipbreaker is designed to influence chip shape and breakage during metric thread turning. By shaping how material is removed, a dedicated chipbreaker reduces the risk of long, stringy chips and supports a predictable cutting pattern. This results in more stable cutting conditions and helps to protect the toolpath and machine. The term chipbreaker denotes a small relief or groove in the insert geometry that directs and fractures chips, which is particularly useful for repetitive thread-production cycles. Faster set-ups through standardised designation and clear marking An ISO-style designation such as P40519-M8 gives shop-floor personnel a concise reference for ordering and identification. Standardised markings reduce set-up time and minimise the risk of fitting an incorrect insert into a holder. In practical terms, clearer labelling supports consistent stocking and quicker tool changes, improving process throughput. The designation also assists in traceability during production planning and maintenance checks, contributing to a more efficient workflow. Easy identification and inventory management for production teams A plainly marked insert designation provides benefits beyond the cutting operation: it aids stock rotation, reordering and quality control. The threading insert designation and chipbreaker code make it straightforward to match spare inserts to the required turning operation without additional decoding. Where catalogue descriptions are brief, the clearly visible SKU and designation act as the primary reference for purchasing and replacement, reducing administrative overhead and downtime between operations. Application guidance and compatibility considerations Thread cutting performance depends on the holder geometry, machine rigidity and process parameters rather than on the insert alone. The threading insert geometry primarily governs chip formation and basic thread profile, but final results require appropriate clamping and the correct toolholder setup. For best outcomes, combine the insert’s chip control features with suitable cutting conditions and verify the holder’s compatibility with the ISO-style insert seating; this ensures repeatable thread quality and predictable production cycles. Contact Metav Werkzeuge for tailored application advice and to secure Walter Tools parts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: P40519-M8--WALTER Designation: P40519-M8 Product type: Threading insert Facts Chipbreaker designation: M8 ISO-style designation: P40519-M8 Special features Series: Not applicable Sort/series description: Not specified in available catalogues Manufacturer: Walter Tools FAQ What is the function of an M8 chipbreaker? The M8 chipbreaker refers to the insert’s chip-control geometry; it guides and fractures chips during metric M8 thread turning to promote safer chip evacuation and more predictable cutting behaviour. How is the P40519-M8 identified in stock and documentation? Identification uses the ISO-style designation P40519-M8 together with the article number P40519-M8--WALTER, which simplifies ordering and ensures the correct threading insert is selected. For which machining task is this insert intended? This insert is intended for thread turning operations where a dedicated chip-control geometry for M8 threads is required; suitability for a given task depends on the holder and process parameters. What does the ISO-style designation indicate? The designation combines a model identifier with the chipbreaker code; it provides a compact reference to the insert geometry and intended chip-control function, aiding selection and inventory management. Is there a detailed series description available? For this sort, catalogue information does not provide a clear series description; available documentation lists the series as not applicable and lacks further specification. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected designations are mentioned for explanation only. There is no connection between our company and the mentioned brands. The offered item is original, factory-new goods from the manufacturer Walter Tools.
P40569-M12 P40569-M12 Nicht zutreffend Wendeplatten - Walter Tools
Take advantage of a compact solution that pairs precise M12 thread form with the reliability of a recognised toolmaker; the indexable format ensures quick indexing and consistent thread quality. Order the P40569-M12 threading insert directly via Metav Werkzeuge or consult the team for selection advice. P40569-M12 Threading Insert – M12 Thread Profile by Walter Tools A P40569-M12 threading insert designed for industrial thread cutting operations, optimised for producing M12 metric threads in machining environments. Precision M12 thread geometry Indexable insert for stable clamping Walter Tools manufacturing quality Consistent M12 thread quality for production runs The P40569-M12 is a compact threading insert engineered to deliver repeatable results when producing metric M12 threads. The indexed format supports consistent thread form across multiple indexing cycles, reducing the risk of variation between parts. For machining planners, the predictable geometry of the insert helps maintain process stability and lowers scrap rates, which directly contributes to improved throughput and less rework. Faster changeovers with indexable format An indexable design shortens tool-handling time because a worn edge can be rotated or replaced without changing the entire holder. This reduces machine downtime and simplifies inventory management compared with single-use threading tools. The insert format is particularly suitable for workshops and production lines where quick index changes improve overall equipment effectiveness while keeping handling straightforward for operators. Application scope and material considerations The insert is intended for standard threading tasks at the M12 size. Its geometry supports conventional threading cycles and is compatible with common workshop threading practices. When integrating the insert into a machining process, consider feeds and speeds appropriate for the workpiece material and the chosen thread-cutting cycle to achieve the required surface finish and dimensional accuracy. For application guidance or to order Walter Tools threading inserts, contact Metav Werkzeuge for tailored advice and availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P40569-M12--WALTER Product type: Threading insert Brand: Walter Tools Facts Thread size: M12 Format: Indexable insert SKU: P40569-M12--WALTER Special features Designed for metric thread cutting Compact indexable design Manufacturer brand: Walter Tools FAQ What thread size does this insert produce? The insert produces an M12 metric thread; the P40569-M12 threading insert from Walter Tools is specified for that thread form. Is the insert indexable or single-use? This is an indexable insert; spent cutting edges can be rotated to a fresh position to extend tool life. Which machining tasks suit this insert? The insert is intended for standard industrial thread cutting operations where M12 threads are required. How does the insert affect downtime? The indexable format reduces downtime compared with non-indexable tools because edges can be indexed or changed rapidly, supporting efficient production workflows. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
P4130-4R12-E47 WKK10S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coated carbide and the WKK10S grade delivers robust wear resistance and stable edge life for demanding cast iron operations, while the 4R12-E47 chipformer ensures consistent chip control and fewer interruptions. Benefit from predictable performance and productive cutting when machining grey and nodular cast irons. Order the P4130-4R12-E47 WKK10S drilling/reaming indexable insert directly via Metav Werkzeuge or ask our consultants if needed. Drilling/Reaming Indexable Insert P4130-4R12-E47 WKK10S — Tiger·tec Silver for cast iron, Walter Tools P4130-4R12-E47 WKK10S is an indexable insert designed for drilling and bore-enlarging operations in cast iron, offering a coated carbide grade optimised for abrasive, breakable chips. Tiger·tec Silver coating for extended tool life Optimised for cast iron machining 4R12-E47 chipformer for reliable chip control Walter Tools quality and stable edge performance Increased productivity through hardened coating technology The Tiger·tec Silver coating combined with the WKK10S carbide microstructure delivers a measurable advantage in abrasive conditions typical of cast iron machining. This coated carbide formulation resists abrasive wear and reduces flank and crater wear, which leads to longer tool life and fewer indexings during multi-hole or serial drilling sequences. For production environments seeking predictable tool-change intervals, the result is a higher net machining time and reduced machine idle periods. Consistent chip formation and fewer interruptions The 4R12-E47 chipformer is engineered to produce short, controllable chips when machining grey and nodular cast irons. Controlled chip morphology reduces the risk of chip entanglement in deep bores and improves coolant penetration, supporting stable cutting conditions and safer automatic operation. With improved chip evacuation, there is also a direct benefit to surface finish and dimensional repeatability during reaming or bore-enlarging steps. Application-focused design for cast iron components Developed specifically for material group K (cast iron) according to ISO 513, the insert’s geometry and grade prioritise performance where chips tend to fracture and abrasive wear dominates. The result is efficient material removal on brake discs, pump housings or engine components where cast iron is prevalent. The insert’s composition and geometry make it particularly suitable for batch production and workshop environments that require reliable, repeatable performance rather than frequent tool adjustment. Reliable process security and measured economy Built under the Walter Tools quality standards, this insert supports process stability across repeated cycles. Stable edge retention reduces scrap risk and rework, while the coated grade contributes to predictable tool life, enhancing the cost-in-use equation. For manufacturing operations aiming to balance throughput and component quality, the insert supports consistent surface integrity and lowers the operational variability commonly associated with cast iron machining. Contact Metav Werkzeuge for application recommendations and to source Walter Tools P4130-4R12-E47 WKK10S inserts tailored to cast iron production. Technical data Article number: P4130-4R12-E47-WKK10S-WALTER Designation: P4130-4R12-E47 WKK10S Series: Tiger·tec Silver Core characteristics Grade: WKK10S Material group: K (cast iron) Chipformer: 4R12-E47 Special features and applicability Coating: Tiger·tec Silver (coated carbide) Optimised for: cast iron machining Application type: drilling and bore-enlarging indexable insert Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The P4130-4R12-E47 WKK10S insert is optimised for cast iron (material group K) and is designed to handle the abrasive and fragmenting chip behaviour typical of these materials. Is the cutting grade coated and what benefits does that bring? Yes, the WKK10S grade uses the Tiger·tec Silver coating technology; this improves wear resistance and contributes to a longer, more predictable tool life under abrasive conditions. What role does the 4R12-E47 chipformer play? The 4R12-E47 chipformer shapes chips into short, controllable fragments, enhancing chip evacuation in bores and reducing the likelihood of entanglement during drilling or reaming operations. Can this insert be used for production series? The insert’s combination of coated carbide grade and controlled chip formation makes it suitable for serial production where stable cutting conditions and repeatability are required. How does the insert affect surface finish and dimensional accuracy? Consistent chip control and wear-resistant grade contribute to improved surface integrity and dimensional stability during bore-enlarging and finishing passes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used solely for explanation and reference. There is no affiliation or partnership implied between our company and the named manufacturers. The offered item is an original, brand-new product from Walter Tools.
P4130-4R12-E47 WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK20S coated-carbide grade for reliable machining of cast iron components; the optimised 4R12-E47 chipbreaker ensures stable chip formation and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific advice. P4130-4R12-E47 WKK20S drill/boring indexable insert — coated carbide for cast iron | Walter Tools A P4130-4R12-E47 WKK20S drill/boring indexable insert engineered to provide robust performance and controlled chip formation when machining cast iron materials. Tiger·tec Silver coating for long tool life Optimised chipbreaker 4R12-E47 for cast iron Coated carbide grade WKK20S for abrasive wear Steady production through advanced coating and grade selection The insert combines Tiger·tec Silver coating with the WKK20S grade, a coated carbide formulation tuned for abrasive cast iron applications. This combination increases tool life and reduces the frequency of index changes, which translates directly into lower process interruptions and more predictable production cycles. The substrate and coating technology are focused on withstanding the high abrasive wear typical of grey and ductile cast iron, so the cutting edge remains sharp for longer and delivers a consistent surface finish throughout batch runs. Reliable chip control for secure machining processes Equipped with the chipbreaker 4R12-E47, the insert promotes stable chip formation and effective evacuation during drilling and boring tasks. Short, controllable chips minimise the risk of snaring and reduce the need for manual chip handling, improving operator safety and machine uptime. In practical terms, the optimised chip geometry contributes to process security by lowering the incidence of unexpected tool stops and enhancing repeatability across successive holes and bores. Practical integration and measurable productivity benefits Designed as an indexable insert for drilling and boring operations, the designation supports straightforward replacement in standard toolholders and modular tool systems. The combination of high wear resistance and predictable edge behaviour reduces tool management overheads and helps maintain throughput in series production. The result is improved productivity and a more economic machining routine when working with cast iron components in workshop or production environments. Contact Metav Werkzeuge for tailored recommendations on the P4130-4R12-E47 WKK20S insert and to discuss toolholder compatibility or batch-sizing strategies; technical consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: P4130-4R12-E47-WKK20S-WALTER Designation: P4130-4R12-E47 WKK20S Product type: drill/boring indexable insert Grade: WKK20S Series: Tiger·tec Silver Chipbreaker: 4R12-E47 Material group: K (cast iron) Manufacturer: Walter Tools Core data Material group code: K Application focus: cast iron machining Coating technology: Tiger·tec Silver Insert designation: P4130-4R12-E47 Special features Coated carbide (beschichtetes Hartmetall) Optimised for abrasive wear typical of cast iron Stable chip formation for drilling and boring Suited to serial production environments FAQ What materials is this insert intended for? The P4130-4R12-E47 WKK20S insert is specified for cast iron applications, reflecting the material group K and the WKK20S grade’s adaptation to abrasive, short-chip conditions. How does the Tiger·tec Silver coating benefit tool life? The Tiger·tec Silver coating on the WKK20S grade reduces abrasive wear and helps maintain edge integrity, which extends the service life of the Walter Tools drill/boring insert in repetitive cast iron operations. What role does the 4R12-E47 chipbreaker play? The chipbreaker 4R12-E47 shapes chips into shorter, more manageable forms, improving evacuation during drilling and boring and supporting consistent cycle times with fewer interruptions. Is the insert compatible with standard toolholders? The P4130-4R12-E47 is an indexable insert for drilling/boring tool systems; compatibility depends on the tool holder design, and Metav Werkzeuge can advise on specific holder models and mounting requirements. How does this insert affect production reliability? By combining a wear-resistant grade with controlled chip formation, the insert contributes to process security and repeatable results, reducing unplanned downtimes in serial machining of cast iron parts. Manufacturer: Walter AG; Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, brand-new product from the manufacturer.
P4130-4R12-E47 WKP30S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating, the WKP30S grade and stable chip formation for consistently productive machining; order the insert via Metav Werkzeuge or consult the technical team for application-specific advice. P4130-4R12-E47 WKP30S drilling/boring indexable insert by Walter Tools — Tiger·tec Silver, for Stahl and Gusseisen The P4130-4R12-E47 WKP30S is a drilling/boring indexable insert designed for high-performance material removal in tough production environments, optimised for machining Stahl and Gusseisen. Tiger·tec Silver coated carbide grade Optimised for Stahl and Gusseisen Stable chip formation for constant results High process security and edge stability Reliable removal and reduced downtime through advanced grade technology The insert’s WKP30S grade, paired with the Tiger·tec Silver coating, delivers a balanced combination of wear resistance and toughness that supports longer tool life and fewer index changes. For industrial workshops seeking steady throughput, the coated carbide substrate provides resistance to abrasive wear common when machining Gusseisen while maintaining edge integrity during interrupted cuts in Stahl. The geometry code 4R12‑E47 indicates a chipbreaker form tuned to controlled chip separation, which reduces the risk of built-up edge and contributes to predictable tool life. Consistent chip control for improved surface quality and process reliability Controlled chip formation is central to repeatable results; the insert’s chipbreaker design promotes short, manageable chips that clear reliably from the bore. This translates into a more consistent surface finish and reduced cycle interruptions. In practice, the chip control reduces thermal load at the cutting edge and minimises vibration, which benefits dimensional stability on parts where bore tolerance and surface integrity matter. The coated surface also assists in friction reduction, supporting cleaner shear and improved finish on both Stahl and Gusseisen components. Practical benefits for production planning and toolset standardisation Adopting this insert in a toolholder system brings measurable benefits: fewer tool changes, predictable regrinding intervals and simplified inventory through a robust grade suitable across common materials. The insert’s compatibility with standard drilling and boring toolholders simplifies retrofitting into existing tool sets. For process engineers, this means easier optimisation of cutting parameters and a clearer cost-per-part calculation owing to consistent wear behaviour. The combination of robust edge stability and optimised chip control helps maintain throughput and reduces scrap rates in serial production. Contact Metav Werkzeuge for matching toolholder recommendations and to secure Walter Tools’ Tiger·tec Silver performance for demanding drilling and boring tasks Technical Data SKU: P4130-4R12-E47-WKP30S-WALTER Article: Bohr-/Aufbohrwendeschneidplatte P4130-4R12-E47 ISO designation: P4130-4R12-E47 WKP30S Grade: WKP30S Series: Tiger·tec Silver Manufacturer: Walter Tools Facts Geometry: 4R12-E47 Material group: P / K Suitable for: Stahl, Gusseisen Special features Coated carbide substrate Chipbreaker: 4R12-E47 Optimised for drilling/boring applications High edge stability and process security FAQ What materials is this insert best suited for? The insert is optimised for machining Stahl and Gusseisen and its WKP30S grade performs across these ISO material groups. Is the WKP30S grade suitable for interrupted cuts? Yes, the WKP30S grade and the insert geometry provide toughness and edge stability appropriate for interrupted drilling and boring operations. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating improves wear resistance and reduces friction at the cutting interface, resulting in longer life and better surface quality on both Stahl and Gusseisen. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4130-4R12-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of a robust Tiger·tec Gold grade and a chipbreaker engineered for consistent swarf management to keep machining cycles stable and productive; order directly via Metav Werkzeuge or consult the team for application advice. P4130-4R12-E47 WPP20G drilling/reaming indexable insert (for steel) — Walter Tools, Tiger·tec Gold P4130-4R12-E47 WPP20G is a drilling and reaming indexable insert optimised for steel machining, delivering repeatable performance in high-volume and precision applications. Drilling/reaming insert P4130-4R12-E47 WPP20G Tiger·tec Gold coating for stable cutting Coated carbide grade optimised for steel Reliable chip control for long tool life Increased throughput through a high-performance grade The P4130-4R12-E47 WPP20G combines a Tiger·tec Gold coating with a wear-resistant, coated carbide substrate to enable higher cutting speeds and longer index intervals. This translates into fewer tool changes and more productive machine hours, a decisive advantage for batch production and continuous machining. The engineered balance between toughness and hardness supports stable edge integrity when machining unalloyed and alloyed steel, reducing scrap risk and ensuring consistent part quality. Predictable chip formation for safer processes Equipped with the 4R12-E47 chipbreaker, the insert delivers controlled swarf formation that simplifies evacuation and reduces the likelihood of re-cutting chips. Predictable chip behaviour benefits process stability and surface finish, while also lowering the load on clamping and coolant systems. The combination of chip control and the coated substrate helps maintain a consistent cutting regime, improving overall process reliability in demanding drilling and reaming operations. Long-term economy through repeatability and durability The coated grade WPP20G emphasises a long tool life and repeatable performance across shifts. Durable geometry and the thermal resilience of the coating reduce flank wear and enable longer intervals between indexings, which in turn lowers per-part tooling cost and machine downtime. For production environments that prioritise steady cycle times, the insert offers a measurable contribution to throughput and operational efficiency. Compatibility, handling and application notes for steel machining Designed for ISO group P materials, the insert is suitable for typical steel machining tasks where heat generation and chip formation require a robust solution. Correct seat orientation and secure clamping in a compatible drilling/reaming holder are essential for achieving the rated performance; appropriate coolant application supports the coating’s thermal management. For specific holder recommendations and machining parameters, consult technical documentation or contact Metav Werkzeuge for tailored guidance on application and feed/speed optimisation. Contact Metav Werkzeuge for application-specific advice on the P4130-4R12-E47 WPP20G insert and to arrange assured supply from stock Technical Data Article number: P4130-4R12-E47-WPP20G-WALTER Product type: drilling/reaming indexable insert Designation: P4130-4R12-E47 WPP20G Manufacturer: Walter Tools Facts Series: Tiger·tec Gold Grade: WPP20G Chipbreaker: 4R12-E47 Material group: P (steel) Special features Coated carbide substrate Optimised for machining steel according to ISO 513 Stable cutting edge for repeatable performance Engineered for productivity and reliable chip control FAQ What materials is this insert suitable for? The P4130-4R12-E47 WPP20G is designed for ISO group P materials, meaning it is optimised for machining unalloyed and alloyed steel. What benefits does the Tiger·tec Gold coating provide? Tiger·tec Gold increases thermal stability and wear resistance on the WPP20G grade, extending index life and supporting higher cutting speeds under continuous operation. Which chipbreaker is fitted and why does it matter? The insert uses the 4R12-E47 chipbreaker, which enables consistent chip formation and safer evacuation during drilling and reaming cycles. Is this an original Walter Tools product and what is the SKU? Yes — this item is an original Walter Tools drilling/reaming indexable insert, SKU P4130-4R12-E47-WPP20G-WALTER. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanation only and do not imply any connection between our company and the named brands. The offered article is an original, factory-new product of the manufacturer (Walter Tools).
P4160-2L08-E47 WKK20S WKK20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKK20S grade for abrasive cast-iron machining; the insert offers extended tool life and reliable chip control for stable production. Order directly via Metav Werkzeuge or ask the consultants for application advice. P4160-2L08-E47 WKK20S drilling/reaming indexable insert — Tiger·tec Silver for cast iron (Walter Tools) The P4160-2L08-E47 WKK20S is an indexable insert designed for drill and reaming applications, optimised for machining cast iron in serial production environments. Tiger·tec Silver coating for wear resistance WKK20S grade optimised for cast iron Stable chip formation with 2L08-E47 breaker Coated carbide for reliable tool life Extended component life through targeted coating technology The combination of Tiger·tec Silver and the WKK20S grade delivers measurable benefits when working with cast iron: the coating reduces abrasive wear and helps maintain a stable cutting edge, which directly extends tool life and reduces downtime. For operations that face frequent edge wear due to hard inclusions or abrasive graphite, this coating-grade pairing minimises the frequency of index changes and supports continuous cycles, increasing overall throughput while keeping maintenance predictable. Reliable chip control for fewer process interruptions Equipped with the 2L08-E47 chipbreaker, the insert produces short, controlled chips that prevent accumulation in the bore and reduce the risk of tool jamming. Improved chip control translates into fewer interruptions and less manual clearing during longer drilling or reaming passes, which enhances process security and results in more consistent part quality. The chip geometry is tuned for brittle, breaking-chip materials typical of the ISO K group, aiding stable machining even in interrupted cuts. Practical production benefits and inventory simplicity As a coated carbide insert tailored to the ISO K category, the component simplifies tool selection for cast-iron workpieces and supports predictable cycle times in batch production. The universality of the WKK20S grade for cast-iron applications reduces the need for multiple special-purpose grades, improving inventory management and ensuring fast tool changeovers. The design promotes reproducible surface finish and dimensional consistency, making it suitable for workshops focused on reliable, efficient machining rather than frequent process optimisation. Contact Metav Werkzeuge for tailored application advice and to secure Tiger·tec Silver inserts for cast-iron machining with Walter Tools P4160-2L08-E47 WKK20S Technical data Article number: P4160-2L08-E47-WKK20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4160-2L08-E47 WKK20S Walter Tools Product type: drilling/reaming indexable insert Manufacturer: Walter Tools Facts Material code: K (cast iron) Grade: WKK20S Series: Tiger·tec Silver Chipbreaker: 2L08-E47 Special features Coating: Tiger·tec Silver Substrate: coated carbide Application: optimised for cast iron (ISO K) Stable chip formation for broken-chip materials FAQ What materials is this insert designed for? The insert is designed for cast iron machining; the WKK20S grade and Tiger·tec Silver coating are optimised for the abrasive and short-chip properties of ISO K materials. How does the 2L08-E47 chipbreaker improve performance? The 2L08-E47 chipbreaker produces controlled, short chips that reduce bore clogging and lower the likelihood of tool stoppages during drilling and reaming. Is this insert suitable for interrupted cuts in cast iron? Yes, the combination of coated carbide and the WKK20S grade provides resilience against the mechanical shocks common in interrupted cuts on cast iron. Will this insert improve surface finish on cast-iron components? The coating and stable cutting geometry help deliver consistent surface results by maintaining edge integrity, which contributes to improved finish over long runs. Can the insert be used across different sizes of drills and holders? The insert is an indexable component intended for compatible drilling/reaming systems; confirm holder compatibility and seat dimensions before selection. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for clarification only and do not indicate any affiliation between our company and the named brands. The offered article is an original, factory-new product of Walter Tools.
P4160-2L08-E47 WKP30S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, stable chip control and broad material coverage for efficient, predictable drilling operations; order directly via Metav Werkzeuge or request further technical advice from our consultants. P4160-2L08-E47 WKP30S – Drilling / Reaming Indexable Insert, Tiger‑tec Silver, for Steel & Cast Iron | Walter Tools The P4160-2L08-E47 WKP30S is an indexable insert designed for drilling and reaming operations, optimised for machining steel and cast iron and suitable for batch and production environments Tiger‑tec Silver coating for extended tool life Optimised for steel (P) and cast iron (K) machining Precision 2L08‑E47 chipbreaker for stable chip control Original Walter Tools quality and repeatability High‑performance coating and grade for longer productive runs The insert benefits from the Tiger‑tec Silver technology and the WKP30S grade, a coated carbide solution engineered to withstand the thermal and abrasive demands of drilling into carbon and alloyed steels as well as grey and nodular cast iron. The advanced coating reduces flank and crater wear, which translates into extended tool life and fewer interruptions for indexable insert changes. For production planners and shop floor managers, this means lower tooling costs per component and more consistent cycle times, supporting smoother workflow and predictable output. Consistent chip formation and process stability for safer cycles A dedicated 2L08‑E47 chipbreaker geometry provides controlled chip shaping and evacuation during turning and reaming operations, reducing the risk of built‑up edge or chip re-cutting. The tailored groove design facilitates predictable fracture of steel and cast iron swarf, improving chip control and coolant access. Stable chip behaviour reduces load peaks on the toolholder and machine spindle, which enhances surface finish and minimises rework — a direct contribution to higher overall equipment effectiveness and improved part quality. Versatile application scope for mixed‑material production The insert is specified for ISO material groups P (steel) and K (cast iron), making it a practical choice for shops that process mixed batches or changeovers between ferrous materials. The coated carbide grade addresses the heat and wear patterns typical for these families of materials and is suitable where repeatability and process reliability are required. As an indexable insert for drilling and reaming, it supports rapid insert replacability, straightforward stockkeeping and simple integration into existing tool systems, offering operational ease without compromising on performance. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger‑tec Silver inserts or to discuss kit supply and technical compatibility for specific drilling operations. Technical data Article number: P4160-2L08-E47-WKP30S-WALTER Manufacturer: Walter Tools Product type: Drilling/reaming indexable insert Designation: P4160-2L08-E47 WKP30S Core data Grade/series: Tiger‑tec Silver Grade: WKP30S Chipbreaker: 2L08‑E47 Material suitability: Steel (P); Cast iron (K) Special features Coating: Tiger‑tec Silver (coated carbide) Intended application: Drilling and reaming Original Walter Tools insert; SKU: P4160-2L08-E47-WKP30S-WALTER FAQ What materials is this insert suitable for? The P4160-2L08-E47 WKP30S insert is specified for ISO groups P and K, meaning it is suitable for machining steel (P) and cast iron (K) applications. What benefit does the Tiger‑tec Silver coating provide? The Tiger‑tec Silver coating on the WKP30S grade increases wear resistance and thermal stability, resulting in longer tool life and more consistent performance during prolonged drilling or reaming cycles. How does the 2L08‑E47 chipbreaker affect machining? The 2L08‑E47 chipbreaker promotes controlled chip formation and evacuation, improving chip control and reducing the likelihood of recutting or built‑up edge during operations in steel and cast iron. Is this insert compatible with standard drill holders? As an indexable drilling/reaming insert from Walter Tools, the design is intended for use in compatible drill heads and holders that accept the P4160 family geometry; toolholder compatibility should be verified against holder specifications and the insert designation. What advantage does choosing the WKP30S grade offer for production runs? The WKP30S grade offers a combination of wear resistance and predictable fracture behaviour suitable for mixed production, reducing tool change frequency and supporting steady cycle times and surface quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are used exclusively for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory‑new product of the manufacturer.
P4160-2L08-E47 WPP20G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WPP20G coated‑carbide grade and the 2L08‑E47 chipbreaker for consistent, productive steel machining. Order the P4160-2L08-E47 WPP20G directly via Metav Werkzeuge or consult our specialists if application advice is required. P4160-2L08-E47 WPP20G drilling/reaming indexable insert (Tiger·tec Gold, 2L08‑E47) — Walter Tools P4160-2L08-E47 WPP20G is a coated carbide indexable insert designed for drilling and reaming operations in steel, delivering stable chip formation and reliable cutting‑edge performance for productive machining. Tiger·tec Gold coating performance Optimised for steel machining 2L08‑E47 chipbreaker for stable chips WPP20G coated carbide for long life Higher process reliability through coating and grade The combination of the Tiger·tec Gold coating and the WPP20G grade provides improved wear resistance and thermal stability under drilling and reaming loads. The coating reduces flank and crater wear during continuous cutting, which lengthens the service life of the insert and contributes to lower tool change frequency. For production environments, this means fewer interruptions and a more predictable maintenance cycle, supporting steady throughput when machining unalloyed and alloyed steel according to ISO P groupings. Consistent chip formation for safe, efficient drilling The chipbreaker 2L08‑E47 is engineered to control chip shape and evacuation in drilling and reaming applications, reducing the risk of chip packing and re‑cutting. Stable chip control lowers the chance of tool overload and improves hole quality by preventing built‑up edge and irregular chip flow. When paired with a correctly adjusted feed and speed, the indexed insert achieves uniform material removal and helps maintain bore geometry over extended runs, so cycle times remain consistent and process variability is reduced. Practical integration and selection guidance The P4160-2L08-E47 WPP20G insert is suitable for integration into standard indexable drilling modules that accept the P4160 designation. Selection should focus on matching the insert geometry and chipbreaker to the machine’s rigidity and the specific steel grade being machined; tougher, less wear‑resistant steels may require different cutting data. Because the insert is a coated carbide type, it is particularly effective in operations where a balance between wear resistance and toughness is required, offering a reliable compromise for many steel machining tasks. Discuss machining parameters and tool selection with Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise recommendations on Walter Tools inserts Technical Data SKU: P4160-2L08-E47-WPP20G-WALTER Designation: P4160-2L08-E47 WPP20G Product type: Drilling/reaming indexable insert Manufacturer: Walter Tools Core data Grade: WPP20G Series: Tiger·tec Gold Material group: P (steel) Chipbreaker: 2L08‑E47 Special features Coated carbide (Tiger·tec Gold) Optimised for steel machining Stable chip formation Insert designation: P4160-2L08-E47 FAQ Which materials is this insert suited for? The P4160-2L08-E47 WPP20G insert (Walter Tools) is formulated primarily for machining steel (ISO group P), covering both unalloyed and alloyed steels where standard heat and chip formation are expected. What advantages does the Tiger·tec Gold coating provide? The Tiger·tec Gold coating enhances wear resistance and thermal stability, reducing flank and crater wear during drilling and reaming and thereby extending the useful life of the insert under production conditions. How does the 2L08‑E47 chipbreaker affect machining? The 2L08‑E47 chipbreaker is designed to produce short, controllable chips in drilling operations, improving evacuation, preventing chip packing and supporting consistent hole quality over longer tool life. Is the insert suitable for stainless or hardened steels? The insert is specified for steel in general (ISO P). Suitability for stainless steel or pre‑hardened materials is not detailed for this grade; for such applications alternative grades or coatings should be considered. How is the insert identified and replaced? Identification is by the designation P4160‑2L08‑E47 and the grade WPP20G; replacement should follow the machine maker’s instructions for indexable insert exchange and the chosen drilling module’s compatibility. Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names remain the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered article is original, factory‑new goods of Walter Tools.
P4160-2L08-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of Tiger·tec Silver coating and the WSM20S grade for stable chip formation and long tool life; order the insert directly via Metav Werkzeuge or consult our advisors for process optimisation. P4160-2L08-E47 WSM20S drill/reaming indexable insert – Tiger·tec Silver, for rostfreier Stahl & superalloys (Walter Tools) The P4160-2L08-E47 WSM20S is a drill/reaming indexable insert developed for demanding CNC operations, offering reliable chip control and cutting-edge coating technology for machining rostfreier Stahl and heat‑resistant superalloys. Tiger·tec Silver coating for enhanced wear resistance WSM20S grade for rostfreie and superalloy machining Stable chip formation and robust cutting edge Designed for productive drilling and reaming cycles Consistent chip control for demanding materials The combination of the 2L08-E47 chipbreaker geometry and the WSM20S carbide grade delivers controlled chip breaking and reduced tendency for built‑up edge when machining rostfreier Stahl and similar tough alloys. This results in a predictable cutting process and fewer interruptions for chip clearance. The insert’s geometry is tuned to support continuous drilling and reaming cycles, which translates into improved cycle times and higher process reliability without requiring complex parameter adjustments. Coating and grade engineered for extended tool life The application of Tiger·tec Silver provides a thermally stable coating that reduces flank and crater wear under elevated cutting temperatures common with superalloys and stainless materials. As a coated carbide grade, WSM20S balances hardness and toughness to protect the cutting edge against abrasion while maintaining edge stability. The net effect is longer intervals between index changes and a measurable reduction in tooling-related downtime, supporting a more economical production flow. Integration into productive machining systems As a drill/reaming indexable insert, the component is compatible with standard toolholders and fixtures used in high‑volume CNC centres. Its design supports predictable tool life and consistent hole quality, contributing to productive machining and improved first‑pass accuracy. Specifying this insert for operations in which thermal loading and material toughness challenge conventional grades enhances process security and helps maintain surface integrity in finished components. Contact Metav Werkzeuge for tailored recommendations on integrating this Walter Tools Tiger·tec Silver insert into production or to request application‑specific cutting data: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 Technical data Article number: P4160-2L08-E47-WSM20S-WALTER Name: Bohr-/Aufbohrwendeschneidplatte P4160-2L08-E47 WSM20S Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM20S Chipbreaker: 2L08-E47 Material designation: S / M Key specifications Insert designation: P4160-2L08-E47 WSM20S Suitable material groups: M (rostfreie Stähle), S (superlegierungen, Titan) Product type: drill/reaming indexable insert Special features Coating: Tiger·tec Silver Carbide: coated carbide grade WSM20S Application: rostfreier Stahl; heat‑resistant superalloys and titanium depending on geometry Behaviour: stable chip formation, robust cutting edge, designed for productive machining FAQ Which materials can be machined with this insert? The P4160-2L08-E47 WSM20S insert from Walter Tools is optimised for rostfreier Stahl (material group M) and heat‑resistant superalloys and titanium (material group S), offering secure chip formation in those ISO‑defined groups. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal stability and reduces wear at elevated cutting temperatures, which helps the insert maintain edge integrity and extend service life during continuous drilling and reaming operations. What is the role of the 2L08‑E47 chipbreaker? The 2L08‑E47 chipbreaker geometry is engineered for controlled chip segmentation and evacuation in deep or interrupted drilling cycles, improving process consistency and reducing the risk of built‑up edge. Is the grade WSM20S a solid carbide or coated grade? WSM20S is a coated carbide grade within the Tiger·tec Silver family, combining a protective coating with a carbide substrate to balance wear resistance and toughness. How does this insert contribute to machining productivity? By enhancing chip control and offering a thermally resilient coating, the insert reduces index changes and tooling downtime, supporting longer uninterrupted runs and more consistent hole quality. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes. There is no affiliation between Metav Werkzeuge and the named manufacturers; the offered item is original, factory‑new goods of the listed brand.
P4160-2R04-E47 WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger‑tec Silver coating and the WKK20S grade to achieve stable, productive machining of cast iron; the 2R04‑E47 chipbreaker ensures reliable chip control and low downtime. Order directly via Metav Werkzeuge or consult the team for application-specific guidance. Drill/Boring indexable insert P4160-2R04-E47 WKK20S — Tiger‑tec Silver coated carbide for cast iron (Walter Tools) The P4160-2R04-E47 WKK20S is a drill/boring indexable insert engineered for efficient machining of cast iron, combining Tiger‑tec Silver coating with a purpose-designed chipbreaker to maintain process stability in abrasive materials Tiger‑tec Silver coated carbide grade WKK20S Optimised for abrasive cast iron machining Stable chip formation for consistent productivity Compatible with P4160-2R04-E47 insert geometry Improved process reliability through a high‑performance coating The combination of the Tiger‑tec Silver coating and the WKK20S carbide grade provides a measured increase in wear resistance for abrasive cast iron applications. Coated cemented carbide minimises flank and crater wear under typical interrupted-cut conditions, which translates into longer tool life and fewer index changes on the shop floor. Because the grade is designed for the ISO K group, the insert copes well with the short, brittle chips and abrasive particle content commonly found in cast iron, giving predictable service intervals and helping to reduce unplanned production stops. These material and coating choices together support a more consistent surface finish and repeatable cycle times. Predictable chip control reduces downtime and improves throughput The integrated 2R04‑E47 chipbreaker is tuned to produce small, manageable chips during drilling and boring in cast iron, which reduces the risk of chip entanglement and machine stoppages. Stable chip formation directly affects spindle load and coolant flow, leading to smoother machining and reduced cleaning or manual intervention between cycles. For production environments where uptime and repeatability are paramount, the combination of chip geometry and coated carbide enables higher effective productivity without complex process changes. The result is a measurable reduction in machine idle time and a more reliable production flow. Tailored for cast iron: clearer results with less rework Designed for ISO group K materials, this insert addresses the specific challenges of abrasive cast iron cutting—namely rapid abrasive wear and fragmented chips. By matching coating technology and grade to the workpiece, the insert reduces the frequency of edge failure and contributes to improved surface quality on bores and countersinks. The technical design helps to avoid secondary operations caused by poor surface integrity, which is particularly important in assemblies where bore tolerance and finish matter. In short, the tool supports fewer corrective steps and steadier output quality. Smooth integration into existing drilling and boring set-ups The insert geometry and designation are compatible with standard P4160‑style toolholders, allowing for simple replacement and minimal set‑up changes. Because the component follows established insert standards, tool change routines and inventory management remain straightforward. The carbide backing and coated face allow secure clamping and consistent seating, which assists in maintaining tool runout and repeatability across successive inserts. For workshops seeking an efficient upgrade for cast iron operations, this insert delivers an immediate performance uplift with limited process adaptation. Contact Metav Werkzeuge for application advice on Walter Tools Tiger‑tec Silver inserts or to arrange supply of the P4160-2R04-E47 WKK20S for cast iron machining. Technical data Article number: P4160-2R04-E47-WKK20S-WALTER Name: Drill/boring indexable insert P4160-2R04-E47 WKK20S Brand: Walter Tools Series: Tiger‑tec Silver Core data Material group: K (cast iron) Grade: WKK20S Chipbreaker: 2R04‑E47 Special features Coating: Tiger‑tec Silver Substrate: Coated cemented carbide Application: Cast iron machining Product type: Drill/boring indexable insert FAQ What materials is this insert designed for? The P4160-2R04-E47 WKK20S from Walter Tools is engineered for ISO group K, making it suitable primarily for cast iron machining. How does the 2R04‑E47 chipbreaker affect performance? The 2R04‑E47 chipbreaker on the Walter Tools insert promotes controlled, short chips in cast iron, reducing downtime and improving throughput. Is the WKK20S grade coated or uncoated? The WKK20S grade is a coated carbide grade within the Tiger‑tec Silver system, providing enhanced wear resistance for abrasive cast iron work. Can this insert be used in standard P4160 toolholders? Yes. The P4160‑style designation indicates compatibility with corresponding drill/boring indexable toolholders for straightforward integration. What production benefits can be expected from switching to this insert? Using the Walter Tools P4160-2R04-E47 WKK20S typically leads to improved tool life, steadier surface quality and fewer process interruptions when machining cast iron. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Trademarks and trade names used in this description are the property of their respective owners. There is no affiliation between our company and the named brands beyond the sale of authentic, factory‑new products. The offered article is an original, brand‑new item from Walter Tools.
P4160-2R04-E47 WKP30S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger‑tec Silver coating, the WKP30S grade and the optimised 2R04‑E47 chip control geometry to achieve consistent productivity and extended tool life; order via Metav Werkzeuge or consult the technical team for application-specific advice. P4160-2R04-E47 WKP30S Drill/Boring indexable insert — Tiger‑tec Silver, Walter Tools The P4160-2R04-E47 WKP30S is a drill/boring indexable insert designed for productive machining of steel and cast iron. Tiger‑tec Silver surface technology Grade WKP30S for P and K materials Optimised 2R04‑E47 chip control geometry High-performance machining for steel and cast iron The combination of Tiger‑tec Silver coating and the WKP30S grade delivers a balance of toughness and wear resistance tailored for machining steel and cast iron. The coating reduces friction and thermal loading at the cutting edge, which in turn improves tool life and allows sustained cutting parameters under industrial conditions. For production environments this translates into fewer insert changes and more stable process windows, supporting higher throughput and predictable component quality. Reliable chip formation and reduced rework The 2R04‑E47 chip control geometry is engineered to shape and evacuate chips reliably during drilling and boring cycles. A well‑designed chip breaker prevents long, stringy chips and promotes short, controllable fragments, reducing the risk of tool jamming and surface damage. This insert’s geometry therefore contributes directly to a cleaner machining environment and improved surface finish, lowering the probability of secondary operations and rework. Practical benefits on the shop floor Designed as a drilling/boring indexable insert, the component integrates into conventional toolholders and cutters used in metalworking shops. Its suitability for workpiece groups P and K means it's a pragmatic choice when facing mixed production of unalloyed/alloyed steels and various cast irons. The net effect is easier tool inventory management and predictable change intervals, which support consistent cycle times and reduced setup variability across batches. Contact Metav Werkzeuge for application support, tooling recommendations and to source the P4160-2R04-E47 WKP30S insert directly via Metav Werkzeuge using eMail: info@metav-werkzeuge.com or Telephone: +49 2822 7131930 Technical data Article number: P4160-2R04-E47-WKP30S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4160-2R04-E47 WKP30S Walter Tools Manufacturer: Walter Tools Facts Grade: WKP30S Chip breaker: 2R04‑E47 Series: Tiger‑tec Silver Suitable for materials: P (steel), K (cast iron) Special features Coating: Tiger‑tec Silver Material specification: P / K Product type: Drill/Boring indexable insert ISO designation: P4160-2R04-E47 WKP30S UID/SKU: P4160-2R04-E47-WKP30S-WALTER FAQ What materials is the P4160-2R04-E47 WKP30S designed to machine? The P4160-2R04-E47 WKP30S insert from Walter Tools is specified for machining workpiece groups P (steel) and K (cast iron) according to ISO classifications. Is the insert suitable for stainless steel applications? Stainless steel is not listed among the specified material groups for this insert; the P4160-2R04-E47 WKP30S is optimised for steel and cast iron, so selection for stainless applications should be confirmed with process trials or technical consultation. How does the Tiger‑tec Silver coating benefit production runs? The Tiger‑tec Silver coating reduces friction and thermal stress, improving wear resistance and enabling more stable cutting parameters, which helps maintain productivity across extended production runs. What function does the 2R04‑E47 chip breaker serve? The 2R04‑E47 geometry controls chip formation to produce short, manageable chips during drilling and boring, lowering the risk of chip entanglement and contributing to improved surface quality. Can this insert be used in standard drill/boring holders? The insert is manufactured as a drill/boring indexable insert and is intended for integration into compatible holders; compatibility should be checked against holder specifications and clamping systems. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com
P4160-2R04-E47 WPP20G WPP20G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and a dedicated chipformer for stable chip control when machining steel; the result is predictable tool life and reduced downtime. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. P4160-2R04-E47 WPP20G drill/boring indexable insert – Tiger·tec Gold, for steel, Walter Tools P4160-2R04-E47 WPP20G is a drill/boring indexable insert designed for reliable machining of steel in production and repair environments, delivering consistent chip control and wear resistance. Tiger·tec Gold coated carbide grade WPP20G Optimised chipformer for stable chip control Designed for machining steel (ISO P) Reliable wear resistance and long tool life High-performance cutting for steel with reduced cycle times The P4160-2R04-E47 WPP20G insert combines a Tiger·tec Gold coating with a coated carbide substrate to provide enhanced resistance against abrasive and adhesive wear during continuous drilling and boring operations. The WPP20G grade is specified for steel (ISO P), which means the insert has been engineered to handle the typical heat generation and chip formation associated with unalloyed and alloyed steels. The coated carbide substrate enables higher cutting parameters than uncoated grades, so cycle times can be reduced while maintaining dimensional stability. In practice, this translates into fewer tool changes and more predictable production scheduling for job shops and manufacturing lines. Stable chip control and process security for repeatable results A key benefit of the insert is its 2R04-E47 chipformer, which is optimised to produce short, controllable chips when machining ISO P materials. Controlled chip formation reduces the risk of chip entanglement and improves surface finish, so the machining process becomes safer and more efficient. The robust edge preparation and coating work together to protect the cutting edge against thermal and mechanical stresses, promoting wear resistance and consistent part quality. This technical reliability supports higher process security and reduces scrap rates, an advantage for operations that require repeatable accuracy and tight tolerances. Clear application guidance and compatibility for workshop use The insert is presented in the ISO designation P4160-2R04-E47 WPP20G and is intended for drilling and boring applications where steel is the primary workpiece material. The Tiger·tec Gold coating provides a balance between toughness and hardness, making the grade suitable for a broad range of steel types encountered in everyday machining. As an indexable insert, it is compatible with toolholders and drill bodies designed for this ISO geometry; selection of the correct holder and clamping system is essential to fully exploit the insert’s tool life and cutting performance. For operators unfamiliar with the grade, specifying the ISO P classification helps ensure correct process integration and avoids misapplication. For reliable, high-productivity steel machining with Walter Tools’ Tiger·tec Gold grade, contact Metav Werkzeuge for technical advice and tailored recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P4160-2R04-E47-WPP20G-WALTER SKU: P4160-2R04-E47-WPP20G-WALTER Manufacturer: Walter Tools Core data ISO designation: P4160-2R04-E47 WPP20G Grade / series: Tiger·tec Gold (WPP20G) Chipformer: 2R04-E47 Materials & Features Suitable for: Steel (ISO P) Substrate: Coated carbide Application: Drilling / boring indexable insert Brand: Walter Tools FAQ What materials is this insert suitable for? The insert is specified for steel (ISO P); the WPP20G grade is optimised for the heat and chip formation typical of unalloyed and alloyed steels. What does the chipformer 2R04-E47 do? The 2R04-E47 chipformer controls chip shape and evacuation for drilling/boring in ISO P materials, improving surface finish and process security. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on this insert increases wear resistance and thermal stability, which helps to extend tool life under higher cutting parameters. Is this insert compatible with standard drill bodies and holders? The insert follows the ISO designation P4160-2R04-E47 and is intended for compatible drill and boring tool systems; correct holder selection is required for optimum performance. Who supplies technical support for this product? Technical advice and application support can be provided by Metav Werkzeuge; the insert is offered under the Walter Tools brand as an indexable drilling/boring insert. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany
P4160-2R04-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of a coated‑carbide grade that combines Tiger·tec Silver wear resistance and a chipbreaker engineered for stable chip formation, ensuring consistent cutting‑edge behaviour in demanding stainless and heat‑resistant alloy applications; order or request advice via Metav Werkzeuge for tailored process support. P4160-2R04-E47 WSM20S Drill/Boring Indexable Insert – Tiger·tec Silver for stainless steels and superalloys | Walter Tools The P4160-2R04-E47 WSM20S is a coated carbide indexable insert designed for drilling and boring operations, optimised for machining stainless steels and heat‑resistant superalloys. Tiger·tec Silver coated grade WSM20S Engineered for stainless steels and superalloys Stable chip formation under heavy cuts Consistent cutting‑edge stability Higher throughput through predictable cutting performance The Tiger·tec Silver technology in this grade provides a balanced combination of wear resistance and thermal stability, which translates into longer effective tool life and fewer interruptions for insert changes. The coated carbide composition of the WSM20S grade is formulated to resist the thermal and adhesive wear common when machining tough, work‑hardening materials. As a result, production cycles become more predictable and setup times are reduced, supporting higher throughput in serial and batch machining. Secure machining of stainless steels and heat‑resistant alloys Designed specifically for the ISO material groups S and M, the cutting material supports reliable chip control when cutting stainless steels and superalloys. These workpieces typically generate high temperatures and tend to form built‑up edge; the WSM20S grade emphasises heat resistance and a stable cutting edge to counter these effects. The integrated chip geometry improves evacuation under interrupted cuts, reducing the risk of surface damage and improving the repeatability of each bore or hole. Improved process stability with optimised chip control The insert is supplied with the 2R04‑E47 chipbreaker, which aids in controlled segmentation of swarf and smooth evacuation even under elevated feed or depth‑of‑cut conditions. Better chip management reduces vibration and helps maintain cutting‑edge stability, which in turn supports consistent surface finishes and dimensional accuracy. Where tool changes are costly in terms of downtime, this insert offers a pragmatic way to maintain component quality across extended tool cycles. Practical advantages for workshop integration As an indexable insert from a reputable tool family, the component is compatible with common clamping systems used in drilling and boring heads, allowing straightforward retrofitting into existing tool assemblies. The combination of a robust coated grade and purposeful chipbreaker geometry reduces the need for frequent process interventions. For production planners, the outcome is a component that contributes to a stable machining process and fewer unexpected stoppages. For application advice, availability or to obtain the Walter Tools P4160-2R04-E47 WSM20S insert for immediate integration, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and fast support Technical data Article number: P4160-2R04-E47-WSM20S-WALTER Product: Drill/boring indexable insert Manufacturer: Walter Tools Grade/Sort: WSM20S Series: Tiger·tec Silver Chipbreaker: 2R04‑E47 Facts SKU / UID: P4160-2R04-E47-WSM20S-WALTER Material group code: S / M Coating technology: Tiger·tec Silver Material type: coated carbide Special features Suitable for stainless steels and heat‑resistant superalloys Optimised for stable chip formation and cutting‑edge stability Designed for demanding drilling and boring operations Belongs to the Tiger·tec Silver family for enhanced wear resistance FAQ What materials is this insert suited for? The P4160-2R04-E47 WSM20S insert is intended for stainless steels and heat‑resistant superalloys (ISO groups S and M), offering heat resistance and chip control for these demanding materials. How does the Tiger·tec Silver technology benefit machining? Tiger·tec Silver provides a combination of coating and substrate properties that increase wear resistance and thermal stability in the WSM20S grade, extending effective tool life and improving process predictability. What role does the 2R04‑E47 chipbreaker play? The 2R04‑E47 chipbreaker promotes controlled chip segmentation and reliable evacuation during drilling and boring, supporting consistent surface quality and reducing the risk of workpiece damage. Can the insert be used for interrupted cuts or heavy depths of cut? Yes, the grade and chipbreaker are designed to enhance cutting‑edge stability under challenging conditions such as interrupted machining and heavier engagement, improving overall process stability. How can the correct insert be identified? Identification is by the designation P4160‑2R04‑E47 WSM20S and the Walter Tools packaging; the code reflects geometry, chipbreaker and grade for straightforward matching to the intended application. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered article is original, brand‑new goods from the manufacturer.
P4160-2R08-E47 WKK20S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKK20S carbide grade for durable, efficient cast iron machining; the precise 2R08‑E47 chipbreaker reduces vibration and secures consistent chip control. Order the insert through Metav Werkzeuge or consult their team for process optimisation. P4160-2R08-E47 WKK20S Drilling/Reaming Indexable Insert — Tiger·tec Silver for cast iron (Walter Tools) P4160-2R08-E47 WKK20S is a drilling/reaming indexable insert designed for efficient machining of cast iron components in industrial production. Tiger·tec Silver coating for wear resistance WKK20S grade optimised for cast iron Chipbreaker 2R08‑E47 ensures controlled chips Faster, more secure cast iron cycles with Tiger·tec Silver The combination of the Tiger·tec Silver coating and the WKK20S carbide grade is engineered for abrasive cast iron work. The coating reduces flank and crater wear, extending tool life and lowering downtime. For production environments this means fewer insert changes and more consistent batch quality. The wear-resistant surface also supports higher cutting parameters while maintaining process stability, helping to increase overall throughput without sacrificing component integrity. How the chipbreaker and geometry improve results The integrated chipbreaker 2R08‑E47 is tailored to the brittle and often short‑breaking chips typical of cast iron. By shaping chip formation and evacuation, this geometry reduces the risk of built-up edge and vibration during drilling and reaming. The result is improved hole quality and repeatability. Explained simply, a chipbreaker creates predictable chip segments so coolant and suction can remove debris effectively, which benefits cycle reliability and reduces rework. Practical advantages on the shop floor As an indexable insert, this design permits fast replacement and consistent clamping repeatability, supporting lean production principles. The WKK20S grade is positioned as a universal, tougher option for abrasive materials — it balances durability with edge toughness to withstand interrupted cuts common in cast iron components. This balance leads to measurable improvements in component finish and a reduction in scrap rates, contributing to predictable manufacturing costs and improved lineside efficiency. Suitable applications and process notes This insert is primarily intended for machining cast iron in drilling and reaming operations where chip control and wear resistance are decisive. The coated carbide composition and chip geometry make the insert suitable for both continuous and slightly interrupted cuts. When integrating into existing toolholders, ensure correct seat and clamping torque according to the holder manufacturer to maintain repeatable results and extend insert life. For reliable cast iron machining with Tiger·tec Silver, contact Metav Werkzeuge for application advice and coordinated delivery: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: P4160-2R08-E47-WKK20S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4160-2R08-E47 WKK20S Walter Tools Numbers / Core technical characteristics Chipbreaker designation: 2R08-E47 Grade designation: WKK20S Series: Tiger·tec Silver Designs / Special features Product type: Drilling/reaming indexable insert Material suitability: cast iron Coating technology: Tiger·tec Silver Carbide class: coated carbide Manufacturer: Walter Tools FAQ What materials is this insert designed for? The insert is designed primarily for machining cast iron; the WKK20S grade and Tiger·tec Silver coating are matched to the abrasive nature and chip behaviour of cast iron. How does the 2R08‑E47 chipbreaker help holemaking? The 2R08‑E47 chipbreaker shapes chips into short, controllable segments, improving evacuation and reducing vibration during drilling and reaming with the P4160‑2R08‑E47 WKK20S insert. Can the insert handle interrupted cuts? Yes, the WKK20S grade offers tougher resistance compared with very hard but brittle grades, making it suitable for mild interruptions commonly encountered in cast iron operations. Is the coating effective at higher cutting speeds? The Tiger·tec Silver coating improves thermal stability and wear resistance, allowing for elevated cutting parameters while maintaining edge life in many cast iron applications. How is tool repeatability achieved with this insert? Repeatability derives from the indexable design and consistent geometry; correct clamping in a compatible holder ensures identical seating, which yields consistent hole quality across multiple indexings. Manufacturer: Walter Tools; Walter AG, Tübingen, Germany; www.walter-tools.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4160-2R08-E47 WKP30S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP30S grade to extend tool life and maintain stable chip formation in drilling and bore-enlarging operations; order the insert directly via Metav Werkzeuge or ask the consultants for tailored machining parameters. P4160-2R08-E47 WKP30S — Indexable insert for drilling and bore enlargement, Tiger·tec Silver, for steel and cast iron | Walter Tools P4160-2R08-E47 WKP30S is an indexable insert designed for high-productivity drilling and bore-enlarging applications in conventional steels and cast irons Tiger·tec Silver coating for enhanced wear resistance WKP30S grade optimised for steel and cast iron Stable chip formation and reliable machining Chipbreaker 2R08-E47 for consistent chip control Maximise cutting performance with advanced coating and grade The P4160-2R08-E47 WKP30S insert combines the Tiger·tec Silver coating with a coated carbide substrate to resist abrasive wear and reduce flank degradation during continuous drilling. This technical pairing improves tool life and maintains consistent cutting edges under thermal load, which in practice reduces machine downtime and tooling costs. The insert is specified for ISO material groups P (steel) and K (cast iron), so the cutting geometry and coating behaviour are matched to the typical heat generation and chip characteristics of these materials. Improve process reliability and surface quality through stable chip control The dedicated chipbreaker 2R08-E47 promotes short, predictable chips that evacuate reliably from the bore, lowering the risk of chatter and tool damage. With clear chip control, feed rates can be stabilised and surface finish is more consistent, delivering tangible productivity gains per shift. The WKP30S grade offers balanced toughness and wear resistance, making it suitable where abrasive cast iron and tougher steels are encountered. Explanation: a coated carbide insert uses a hard substrate with a thin engineered coating to delay abrasive and adhesive wear mechanisms. Reduce production interruptions with robust geometry and application focus Its insert geometry aligns with standard P4160 drilling systems, ensuring repeatable seating and secure clamping in the toolholder. The predictable flank behaviour and the robust coating enable longer intervals between indexings and replacements, supporting leaner tool inventories and fewer machine stoppages. Operators benefit from simpler process setup and less rework, while planners gain improved process stability across batches. The product suits workshop and production environments where consistent, repeatable hole-making in steel and cast iron is required. Contact Metav Werkzeuge for specific application recommendations for the Walter Tools Tiger·tec Silver P4160-2R08-E47 WKP30S insert and receive guidance on optimal cutting data for steel and cast iron machining Technical data SKU: P4160-2R08-E47-WKP30S-WALTER Article designation: P4160-2R08-E47 WKP30S Product type: Indexable insert for drilling/boring Manufacturer: Walter Tools Core data ISO material groups: P (steel), K (cast iron) Grade: WKP30S Chipbreaker: 2R08-E47 Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Series: Tiger-tec Silver Main applications: drilling and bore enlargement in steel and cast iron FAQ What materials is this insert suitable for? The insert is specified for steel and cast iron according to ISO groups P and K; the WKP30S grade is tuned to these materials. What does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the insert increases resistance to abrasive wear and improves thermal stability, extending tool life under demanding drilling conditions. Which chipbreaker is used and why does it matter? The chipbreaker 2R08-E47 produces short, controlled chips that evacuate reliably from bores, reducing the risk of chip-related stoppages and improving surface finish. Is this insert suitable for stainless steel or hardened materials? No specific suitability for stainless steel or hardened steels is indicated; the insert is designed for ISO groups P (steel) and K (cast iron) as provided. How does the insert help reduce production costs? Longer tool life, stable chip control and reduced downtime from fewer indexings contribute to lower tooling and machine costs over production cycles. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new merchandise from Walter Tools.
P4160-2R08-E47 WPP20G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WPP20G grade for consistently productive drilling and reaming in steels; the optimised 2R08-E47 chipformer improves chip control and reduces downtime. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. P4160-2R08-E47 WPP20G drilling/reaming indexable insert for steel – Walter Tools The P4160-2R08-E47 WPP20G is a coated carbide indexable insert designed for drilling and reaming applications in ISO P steels, combining robust wear resistance with reliable chip control. Tiger·tec Gold coated carbide WPP20G Optimised chipformer 2R08-E47 for steel Stable edge life for productive machining Suitable for ISO P steels, universal application High-performance grade for reliable steel machining The insert uses the Tiger·tec Gold technology in the WPP20G grade, a coated carbide solution engineered for the thermal and mechanical demands of steel machining. This grade balances hardness and toughness to deliver a stable edge life under continuous operation, which reduces the frequency of tool changes and supports higher process throughput. The designation aligns with ISO P specifications, meaning the cutting geometry and coating are optimised for unalloyed and alloyed steels, where heat generation and chip formation require tailored material behaviour. Controlled chips and consistent surface finish The built-in chipformer 2R08-E47 is tuned to produce predictable chip shapes during drilling and reaming, improving evacuation and reducing the risk of recutting or surface damage. Improved chip control leads to fewer interruptions for clearing and contributes to a more consistent bore quality. In production environments where cycle time and reproducible surface finish matter, the combination of geometry and coating helps maintain process stability and lowers scrap rates. Designed for productivity and repeatable results As an indexable insert, the item is intended to be mounted in compatible tool bodies to deliver repeatable cutting performance across multiple edges. The WPP20G composition provides a broad material window within the steel group, enabling productive machining across various part families without constant tool requalification. The result is better machine utilisation and a measurable reduction in setup and maintenance overheads, which supports leaner workflow and predictable output. Practical application notes and shop-floor integration The insert is suitable for a range of drilling and reaming tasks in ISO P steels, including both unalloyed and alloyed grades typically encountered in general engineering. While cutting data depends on machine rigidity and coolant strategy, the combination of coated carbide and the 2R08-E47 chipformer is intended to perform well under standard peck-drilling and continuous reaming cycles. For application-specific cutting parameters, material lists or tooling recommendations, Metav Werkzeuge provides technical consultation; contact details are available for tailored support and availability checks. Contact Metav Werkzeuge for expert application advice and availability of the Walter Tools P4160-2R08-E47 WPP20G insert. Technical data SKU: P4160-2R08-E47-WPP20G-WALTER Article: drilling/reaming indexable insert Designation: P4160-2R08-E47 WPP20G Grade: WPP20G Series: Tiger·tec Gold Chipformer: 2R08-E47 Manufacturer: Walter Tools Facts Material code: P Suitable for: ISO P steels (steel) Special features Coated carbide grade Tiger·tec Gold Optimised chipformer 2R08-E47 Intended for drilling and reaming operations Stable edge life and broad steel coverage Applicable to unalloyed and alloyed steels FAQ What materials is this insert suited for? The P4160-2R08-E47 WPP20G insert is intended for ISO P materials, which covers unalloyed and alloyed steels. Which operations is the insert designed for? This item is a drilling and reaming indexable insert, optimised for bore-making and reaming tasks where chip control and surface consistency are required. What distinguishes the WPP20G grade? WPP20G, part of the Tiger·tec Gold family, is a coated carbide grade offering a balance of wear resistance and toughness suitable for productive steel machining. How does the 2R08-E47 chipformer help in practice? The 2R08-E47 chipformer shapes chips to improve evacuation and reduce recutting, which supports consistent finishes and fewer process interruptions with this insert. Is the insert compatible with different tool bodies? The P4160-2R08-E47 designation defines the insert geometry; compatibility with a tool holder depends on the holder design and clamping system. Check the holder’s insert interface before mounting. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names mentioned are the property of their respective owners and are used here for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned manufacturers beyond the sale of original new goods.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com