P4160-2R08-E47 WSM20S WSM20S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WSM20S carbide grade and an optimised chipbreaker for consistent machining of demanding alloys; order directly via Metav Werkzeuge or contact our consultants for application advice. P4160-2R08-E47 WSM20S Bohr-/Aufbohrwendeschneidplatte — Tiger·tec Silver, for rostfreier Stahl and superalloys (Walter Tools) P4160-2R08-E47 WSM20S is an indexable drill/boring insert engineered for heavy machining of heat‑resistant alloys and rostfreier Stahl, offering thermal stability and controlled chip formation. Tiger·tec Silver coating for thermal stability Optimised chipbreaker 2R08-E47 for secure chip flow Suited to rostfreier Stahl and superalloys Coated carbide grade WSM20S for long tool life Proven thermal resistance for difficult-to-machine materials The combination of the Tiger·tec Silver coating and the WSM20S cutting grade provides enhanced heat resistance and improved wear behaviour when machining materials that retain heat. Materials in group S (heat‑resistant superalloys and titanium) and group M (rostfreier Stahl) challenge the cutting edge through poor thermal conductivity and adhesive wear; the coated carbide substrate offers a protective layer that reduces edge degradation and supports stable cutting performance under elevated temperatures. This stability translates into more predictable component quality and fewer unplanned tool changes, supporting continuous production workflows. Secure chip control and consistent surface quality The 2R08‑E47 chipbreaker geometry is designed to shape chips reliably across a range of feed rates, reducing risk of entanglement and improving surface consistency. Controlled chip formation helps maintain a steady cutting force, leading to repeatable surface finishes and reduced cycle-time variation. For job shops and production lines where reproducibility matters, this results in higher first-pass yields and lower downstream rework. The geometric optimisation also aids chip evacuation in deep or interrupted cuts, minimising the likelihood of built-up edge and prolonging the usable life of the cutting edge. Productivity and integration benefits for the workshop As an indexable insert, this solution supports cost-effective tool management: simple replacement of the insert restores cutting performance without regrinding the entire tool body. The coated carbide construction promotes longer tool life and consistent edge geometry over multiple indexings, which contributes to lower tooling costs per finished part. The insert is applicable where process security and surface integrity are priorities—typical sectors include aerospace, power generation and specialised stainless fabrication—offering machine shops a balance of productivity and machining reliability. For adaptation to specific machines or operations, consult machining parameters aligned with the coating and chipbreaker characteristics to maximise performance. Contact Metav Werkzeuge for precise cutting data, grade selection and application recommendations for Walter Tools Tiger·tec Silver inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P4160-2R08-E47-WSM20S-WALTER Designation: P4160-2R08-E47 WSM20S Product type: Bohr-/Aufbohrwendeschneidplatte Series: Tiger·tec Silver Grade: WSM20S Manufacturer: Walter Tools Facts Chipbreaker: 2R08-E47 Material code: S / M Suitable for: rostfreier Stahl (M), heat‑resistant superalloys and titanium (S) Coating: Tiger·tec Silver Special features Coated carbide cutting grade Optimised chip formation and evacuation High temperature resistance and edge stability Designed for demanding machining applications FAQ Which materials are best suited to this insert? The insert is designed for demanding materials; the WSM20S grade with Tiger·tec Silver coating is optimised for rostfreier Stahl and heat‑resistant superalloys (group S and M). What does the chipbreaker 2R08‑E47 deliver in practice? The 2R08‑E47 chipbreaker provides controlled chip shaping and reliable evacuation, improving surface finish consistency and reducing the risk of built‑up edge. Is this insert suitable for high‑temperature cutting conditions? Yes. The Tiger·tec Silver coating and coated carbide substrate offer enhanced thermal resistance and wear protection for elevated cutting temperatures. How does the insert contribute to process stability? Stable edge geometry and predictable chip behaviour minimise tool‑related variation, supporting consistent cycle times and repeatable part quality in serial production. What identification should be used when ordering replacements? Use the designation P4160‑2R08‑E47 WSM20S (SKU P4160‑2R08‑E47‑WSM20S‑WALTER) to ensure the correct grade, chipbreaker and series are supplied. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanation only. There is no affiliation between our company and the named brands. The offered item is an original, brand‑new product of the manufacturer.
P4406-1 WKP35S WKP35S Wendeplatten - Walter Tools
The combination of the Tiger·tec Silver coating and the WKP35S grade delivers high process reliability and extended tool life for demanding milling tasks; the insert is optimised for steel and cast iron applications and supports efficient chip control. Order the insert directly via Metav Werkzeuge or contact our technical consultants for application advice. P4406-1 WKP35S Walter Tools – Indexable milling insert with Tiger·tec Silver coating for steel and cast iron A P4406-1 WKP35S indexable milling insert designed for productive, reliable machining of steel (ISO P) and cast iron (ISO K) components Tiger·tec Silver coating for long tool life Optimised chipformer for stable chip control Suitable for steel and cast iron machining Coated carbide for reliable cutting performance Maximise machining productivity with optimised coating and grade The Tiger·tec Silver coating combined with the WKP35S grade provides a balanced solution between wear resistance and edge stability, leading to consistent cutting performance in interrupted and continuous milling. The coated carbide substrate reduces flank wear and helps maintain dimensional accuracy over longer tool life, which directly supports higher cutting speeds and fewer tool changes. For production environments looking to increase throughput, this combination reduces downtime and contributes to predictable cycle times. Precise chip control and geometry for safer, faster milling An optimised chipformer ensures reliable chip evacuation and reduces the risk of built-up edge during the machining of both steel and cast iron, which are the targeted material groups for this insert. The chip control geometry supports stable chip breakage even under variable cutting conditions, improving surface finish and protecting the tool seat and holder from excessive loads. Explaining briefly: a chipformer shapes the chip as it forms so that it breaks into manageable segments, preventing long, entangling swarf and lowering the chance of workpiece damage. Application guidance and compatibility for broad workshop use This insert is intended for general milling applications where a coated carbide grade is preferred and where the typical temperature and wear mechanisms of steel and cast iron must be managed. The ISO designation indicates suitability for ISO P (steel) and ISO K (cast iron) material groups; selecting appropriate cutting data for these groups will exploit the high process stability and the coating’s thermal and chemical resistance. For converters from standard grades, consider a modest increase in cutting speed to benefit from the Tiger·tec Silver coating, while monitoring wear to establish the optimal parameters for specific workpiece alloys. For highest process reliability with the Tiger·tec Silver coating, contact Metav Werkzeuge for technical advice or to purchase the Walter Tools P4406-1 WKP35S; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P4406-1-WKP35S-WALTER Name: Fräswendeschneidplatte P4406-1 WKP35S Walter Tools Grade: WKP35S Series: Tiger-tec Silver Material groups: P / K ISO designation: P4406-1 WKP35S Manufacturer: Walter Tools Facts Chipbreaker: 1 Special features Coating technology: Tiger·tec Silver Substrate type: coated carbide Target materials: steel (ISO P), cast iron (ISO K) Optimised chipformer for stable chip control Product category: indexable milling insert FAQ What materials is this insert designed to machine? The Walter Tools P4406-1 WKP35S insert is designed primarily for steel (ISO P) and cast iron (ISO K) applications, taking advantage of the Tiger·tec Silver coating for improved wear resistance. How does the Tiger·tec Silver coating benefit machining operations? The Tiger·tec Silver coating on the WKP35S grade reduces abrasive and thermal wear, enhancing tool life and allowing more consistent cutting performance across longer production runs. Is this insert suitable for interrupted cuts or heavy-duty milling? Yes, the coated carbide substrate and the insert’s chip control geometry make the P4406-1 WKP35S well suited to applications with intermittent cutting and variable loads, offering stable edge behaviour. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4406-2 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of a wear‑resistant, coated cemented carbide grade and a proven chipbreaker geometry to maintain stable cutting conditions and high productivity. Order the insert directly via Metav Werkzeuge or contact the consultants for application support. P4406-2 WKP35S — Milling insert (Tiger‑tec Silver) for steel and cast iron by Walter Tools P4406-2 WKP35S is a coated milling insert from the Tiger‑tec Silver series, developed for efficient finishing and roughing of steel and cast iron in industrial milling applications. Coated Tiger‑tec Silver grade Optimised for steel and cast iron Stable chipbreaker geometry Faster cycles with a coated grade that extends tool life The Tiger‑tec Silver coating on this insert reduces adhesive wear and improves heat resistance, resulting in longer tool life and fewer interruptions. As a coated cemented carbide solution, the grade is tuned for common industrial steels and the abrasive nature of cast iron, so machining parameters can be pushed for higher material removal rates while keeping edge stability. This directly supports shorter cycle times and more consistent production output. Cleaner chips and more reliable surface finish The dedicated chipbreaker geometry promotes predictable chip formation and evacuation, which reduces the risk of recutting and surface marks. Improved chip control means less downtime for cleaning and higher first‑pass quality on components. For production environments where repeatability and surface integrity matter, the stable cutting behaviour contributes to fewer rework cycles and a steadier production rhythm. Broad material compatibility for fewer tool changes Designed for ISO groups P and K, the insert covers a wide range of unalloyed and alloyed steel and cast iron applications. The combination of substrate and coating balances toughness and wear resistance, making the insert suitable for mixed production runs where quick changeovers and process flexibility are valuable. This versatility reduces tool inventory complexity and supports smoother planning of mixed‑material batches. Easy selection and integration into existing toolsets The P4406‑2 geometry matches standard toolholder pockets for this insert family, allowing straightforward replacement without adapting machine fixtures. When selecting the insert, focus on matching the holder type and the desired balance between surface finish and metal removal rate; the P4406-2 WKP35S grade is optimised for general‑purpose milling where both edge life and productivity are priorities. For customers less familiar with chipbreaker design, the technical data below clarifies the core specifications to aid rapid selection. Discuss integration of the Tiger‑tec Silver grade with Metav Werkzeuge — our specialists advise on process parameters and suitable holders; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: P4406-2-WKP35S-WALTER Designation: P4406-2 WKP35S Product type: Milling insert Series: Tiger‑tec Silver Grade: WKP35S Manufacturer: Walter Tools Facts Chipbreaker: 2 Special features Coating: Tiger‑tec Silver (coated cemented carbide) Material compatibility: P (steel), K (cast iron) Substrate: coated cemented carbide Typical applications: finishing and roughing in steel and cast iron FAQ Which materials is this insert suitable for? The P4406‑2 WKP35S insert is suitable for machining steel and cast iron, corresponding to ISO groups P and K, and is designed to handle the heat and chip forms typical for these materials. What advantages does the Tiger‑tec Silver coating bring? The Tiger‑tec Silver coating on the WKP35S grade improves wear resistance and heat management, which increases tool life and allows higher cutting speeds compared with uncoated substrates. How does chipbreaker 2 influence machining? Chipbreaker 2 provides controlled chip formation and reliable evacuation for common milling conditions, improving surface quality and reducing the likelihood of chip clogging in trochoidal or conventional milling. Is this insert compatible with standard P4406‑2 toolholders? Yes — the insert geometry P4406‑2 is intended for holders that accept this indexable insert format; the designation P4406‑2 indicates the match to corresponding pocket geometries. Is the insert a coated cemented carbide type? Yes, the WKP35S is a coated cemented carbide grade, combining a tough carbide substrate with the Tiger‑tec Silver coating for enhanced wear resistance. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are used for explanatory purposes only and do not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory‑new product from the respective manufacturer.
P4406-3 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of high process reliability and broad material coverage offered by the Tiger·tec Silver grade; the WKP35S coating and coated carbide substrate deliver long tool life and steady performance in steel and cast iron milling. Order the insert directly via Metav Werkzeuge or contact their consultants for application-specific recommendations. P4406-3 WKP35S P4406-3 WKP35S Tiger‑tec Silver milling indexable insert by Walter Tools A P4406-3 WKP35S milling insert engineered for productive face and shoulder milling of steel and cast iron with a Tiger·tec Silver coated carbide grade. Tiger·tec Silver coating for long life Coated carbide grade WKP35S Optimised chip control with chipbreaker 3 Suitable for steel and cast iron machining Longer tool life and consistent productivity with advanced coating The combination of the Tiger·tec Silver technology and a coated carbide substrate provides a balance between thermal resistance and wear protection, which directly translates into improved productivity and fewer tool changes. In practical terms, this means longer intervals between indexings and a more predictable process window in series production. The plate’s composition reduces flank and crater wear under cyclic thermal loads, making it well suited for demanding milling cycles where repeatability matters most. Predictable chip formation and better surface quality Equipped with chipbreaker 3, the insert controls chip flow to avoid unfavourable entanglement and minimise interruptions. Stable chip evacuation reduces machine downtime and improves operator safety while also contributing to a more consistent surface finish. The designation for steel (ISO P) and cast iron (ISO K) signals that the geometry and micro‑grain carbide are optimised for the typical heat and abrasive wear behaviours of these materials, so finishing steps require less rework and downstream effort. Broad applicability and economical machining in production environments As a robust milling solution from Walter Tools, this insert supports a wide range of milling strategies, from general roughing to more demanding semi‑finishing operations. The WKP35S grade is designed to be a versatile choice where process reliability and part quality are priorities; fewer unexpected tool failures increase overall equipment efficiency. If there are questions about integrating the insert into existing toolholders or selecting cutting data, Metav Werkzeuge provides technical support and application advice via e‑mail or phone for straightforward implementation. Contact Metav Werkzeuge for tailored application advice on the Walter Tools P4406-3 WKP35S and arrange fast supply or machining recommendations Technical Data Article number: P4406-3-WKP35S-WALTER Label: Fräswendeschneidplatte P4406-3 WKP35S Walter Tools Manufacturer: Walter Tools Type: Fräswendeschneidplatte Series: Tiger-tec Silver Facts Chipbreaker: 3 Grade/sort: WKP35S Special features Coating: Tiger·tec Silver (coated carbide) Application: steel (ISO P), cast iron (ISO K) Material designation: P / K FAQ What materials is this insert suitable for? The P4406-3 WKP35S insert is intended for steel (ISO P) and cast iron (ISO K), the WKP35S grade being tuned to the wear and chip characteristics of these groups. What benefit does the Tiger·tec Silver finish provide? The Tiger·tec Silver coating reduces thermal and abrasive wear on the coated carbide substrate, extending the service life of the insert and stabilising cutting conditions. How does chipbreaker 3 influence machining? The chipbreaker 3 geometry promotes controlled chip formation and evacuation, lowering the risk of chip re‑cutting and improving surface quality during milling. Is this insert suitable for both roughing and finishing passes? Yes, the insert’s grade and geometry make it versatile for both productive roughing and reliable semi‑finishing in appropriate machining setups. Can this insert improve overall process reliability? Using the WKP35S grade and optimised chip control can reduce unexpected tool changes and contribute to more consistent cycle times and part quality. Walter Tools; Tübingen; Germany; www.walter-tools.com Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only; there is no connection between our company and the named brands. The offered item is original, brand‑new merchandise of the manufacturer. The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group.
P4406-4 WAK15 WAK15 Wendeplatten - Walter Tools
Take advantage of a purpose‑built solution that combines precise chip control, high productivity for non‑ferrous materials and robust compatibility with standard milling cutters; order directly via Metav Werkzeuge or consult our specialists for application advice. P4406-4 WAK15 milling indexable insert – for aluminium and non‑ferrous metals | Walter Tools A P4406-4 WAK15 milling indexable insert designed for efficient machining of aluminium and other non‑ferrous metals in the Walter N‑series system Walter N‑series for aluminium machining Uncoated carbide grade WAK15 Chipbreaker 4 for stable chip control For non‑ferrous metals, sharp cutting edge Faster, cleaner aluminium machining through optimised chip control The insert combines a very sharp cutting edge with an engineered chipbreaker 4 to reduce built‑up edge and prevent material adhesion when working with aluminium and similar alloys. The chipbreaker geometry breaks swarf into short, controllable segments, which improves evacuation and reduces recutting of chips. For users migrating from general‑purpose grades, this results in fewer interruptions for swarf clearing and a more consistent surface finish, especially on light alloys where sticking and smearing are common. Proven grade and geometry for non‑ferrous performance Built on an uncoated carbide substrate in the Walter N‑series, the insert is optimised for soft, ductile materials classified as N (non‑ferrous). The WAK15 grade offers a balance of edge sharpness and wear resistance appropriate for higher feeds and medium cutting speeds typical in aluminium milling. For teams less familiar with material classifications: “N” denotes a geometry and grade tailored to minimise friction and adhesion, improving tool life and part quality without relying on coatings that can blunt very fine edges. Practical integration, predictable results in production The insert is delivered in the ISO designation P4406‑4 WAK15, simplifying replacement and tool setup across compatible milling bodies. Its specification supports process standardisation: repeatable chip formation, reduced cycle time through fewer stoppages, and predictable tool change intervals. For engineering managers and production planners, this means easier tool inventory management and reliable performance in jobs that prioritise surface integrity and throughput for non‑ferrous components. Contact Metav Werkzeuge for personalised cutting data, tool pairing recommendations and to order the Walter Tools P4406-4 WAK15 insert for aluminium applications Technical Data SKU: P4406-4-WAK15-WALTER Label: Fräswendeschneidplatte P4406-4 WAK15 Walter Tools Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Chipbreaker: 4 Special features Series: Walter N‑Sortensystem Grade: WAK15 (uncoated carbide) ISO designation: P4406-4 WAK15 Application: Aluminium and non‑ferrous metals FAQ What materials is this insert suitable for? The P4406-4 WAK15 insert is intended for aluminium and other non‑ferrous metals (material group N) and is specified for clean chip formation in those materials. Is the cutting grade coated or uncoated? The WAK15 grade used in this insert is uncoated carbide, optimised to keep a very sharp edge for non‑ferrous machining without a coating that might blunt the geometry. How does the chipbreaker 4 improve the process? Chipbreaker 4 is designed to split and curl swarf into short segments, improving chip control and evacuation, which reduces recutting and improves surface finish on soft alloys. Can the insert be used in standard milling bodies? The ISO designation P4406‑4 WAK15 identifies the insert shape and size so it fits milling cutters designed for P4406‑4 inserts; check cutter seat compatibility before installation. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
P4406-4 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP35S grade for stable chip formation and extended tool life; the result is efficient, productive milling of Stahl and cast iron. Order the insert directly via Metav Werkzeuge or consult the team for grade selection and process optimisation. P4406-4 WKP35S indexable milling insert — Tiger·tec Silver coating, chipbreaker 4 (Walter Tools) P4406-4 WKP35S is a coated indexable insert engineered for productive face and shoulder milling in demanding environments, especially when machining Stahl and cast iron. Tiger·tec Silver coated carbide Suitable for Stahl and cast iron Chipbreaker 4 for stable chip control Robust performance for productive milling Superior wear resistance for longer tool life The combination of the Tiger·tec Silver coating and a coated carbide substrate provides pronounced resistance to abrasive and adhesive wear, which translates into longer effective tool life under cyclic loads. The coating reduces friction at the cutting edge and slows flank wear, so changeovers are needed less frequently. For operations where repeatable dimensional results matter, this grade supports consistent performance across a batch, reducing unplanned stoppages and improving overall process reliability. Controlled chip formation reduces machine downtime A dedicated chipbreaker 4 geometry ensures predictable, short chip formation when machining both steels and cast irons. Stable chips minimise the risk of entanglement and protect workpiece surfaces, which helps maintain cycle times and reduces secondary finishing. The insert’s geometry is optimised for regular chip evacuation and stable cutting forces, aiding in vibration dampening and enabling consistent surface quality in roughing and semi-finishing applications. Versatile grade for a broad material range The WKP35S grade is designed for universal application across the ISO groups P and K, making it suitable for a wide mix of components and workpieces. The grade’s balance between toughness and hardness supports interrupted cuts and variable feed conditions frequently encountered in production milling. As a Walter Tools solution, the insert supports streamlined tooling management: fewer grades required, fewer tool changes, and predictable life expectancy when matched with appropriate cutting parameters. For tailored advice on Walter Tools inserts and to ensure optimal grade selection for Stahl and cast iron, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930; our consultants will recommend the right specifications for the application. Technical data SKU: P4406-4-WKP35S-WALTER Article designation: P4406-4 WKP35S Product type: indexable milling insert Brand: Walter Tools Series: Tiger·tec Silver Core specifications Chipbreaker: 4 Grade: WKP35S Material groups: P, K Applicable for Stahl: yes Applicable for cast iron: yes Special features Coating: Tiger·tec Silver Substrate: coated carbide Main applications: milling of Stahl and cast iron Stable chip formation Designed for productive machining FAQ What materials is this insert intended for? The P4406-4 WKP35S insert is specified for machining Stahl and cast iron, operating across ISO groups P and K. How does the Tiger·tec Silver coating benefit production runs? The Tiger·tec Silver coating on this Walter Tools insert reduces friction and wear, leading to longer tool life and more consistent part quality over extended production runs. Which chipbreaker should be chosen for stable chip control? The chipbreaker 4 geometry integrated in this insert delivers controlled short chips, particularly beneficial when machining cast iron and many steel grades. Is this insert suitable for interrupted cuts? Yes, the WKP35S grade combines toughness and wear resistance to tolerate interrupted cuts commonly encountered in milling operations. Kennametal: Hersteller: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com ISCAR: Manufacturer/Responsible: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Sandvik: Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com MetavCUT: Manufacturer/Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers Walter Tools.
P4406-5 WKP35S WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of proven Tiger·tec Silver coating, robust coated-carbide grade and dependable chip control for productive milling of steel and cast iron. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. P4406-5 / P4406-5 WKP35S milling insert (Tiger·tec Silver) for steel and cast iron — Walter Tools The P4406-5 WKP35S is a coated milling insert designed for high-productivity face and peripheral milling operations in steel and cast iron, delivering stable cutting performance under demanding shopfloor conditions. Tiger·tec Silver coated carbide grade Optimised chip control, chipbreaker no. 5 High wear resistance for productive milling Suited for machining steel and cast iron Faster, more consistent machining of steel and cast iron The Tiger·tec Silver series delivers a balance of thermal stability and wear resistance that supports higher cutting parameters on ferrous materials. Thanks to the coated carbide grade and engineered surface finish, the insert maintains edge geometry under elevated temperatures typical for ISO group P (steel) and K (cast iron) machining. This results in fewer tool changes, more consistent component quality and measurable gains in process throughput for shops aiming to reduce cycle time without compromising surface integrity. Coating and grade engineered for extended tool life The Tiger·tec Silver coating improves resistance to abrasive wear and adhesion, offering a reliable barrier against flank and crater wear during continuous and interrupted milling. The underlying coated carbide substrate provides the toughness required for pocket milling and shoulder operations, while the coating supports sustained cutting speeds. For production environments, this combination means longer service intervals and improved predictability of tool life, which simplifies planning and reduces unplanned stoppages. Controlled chip formation to reduce machine downtime The insert’s chipbreaker (no. 5) is designed for dependable chip segmentation in a range of cutting depths and feeds. Effective chip control prevents snarling and tool damage, especially when machining short, brittle chips from cast iron or continuous chips from steels. By promoting uniform chip evacuation, the geometry helps protect inserts and toolholders from heat concentration and mechanical shock, contributing to smoother cycles and reduced scrap rates in repetitive milling operations. Integration into the production process and benefits As a standard-format milling insert from Walter Tools, the insert is compatible with established toolholders and clamping systems used in face and shoulder milling. Its specification supports straightforward parameter selection for common materials, enabling quick process set-up and repeatable results across batches. The result is a robust tool solution that supports stable part quality, lower overall tooling cost per component and predictable machining performance for small-batch and larger production runs alike. If further application data or cutting-parameter recommendations are required, technical consultation is available to align the cutting strategy with the specific machine and workpiece configuration. For tailored application advice and rapid supply of this Walter Tools P4406-5 WKP35S milling insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with process integration and delivery options Technical data Article number: P4406-5-WKP35S-WALTER Label: Fräswendeschneidplatte P4406-5 WKP35S Walter Tools Manufacturer: Walter Tools Product type: Fräswendeschneidplatte (milling insert) Grade / sort: WKP35S Series: Tiger-tec Silver Facts Chipbreaker: 5 Special features Coating: Tiger·tec Silver Material / compatibility: P / K (steel and cast iron) Grade type: coated carbide FAQ What materials is this insert designed for? The P4406-5 WKP35S insert is formulated for machining steel (ISO P) and cast iron (ISO K), offering robust performance across both material groups. How does the Tiger·tec Silver coating benefit machining? The Tiger·tec Silver coating increases thermal and abrasive wear resistance, which extends tool life and enables higher cutting speeds for more productive milling cycles. What does chipbreaker no. 5 mean in practice? Chipbreaker no. 5 indicates an insert geometry optimised for controlled chip segmentation under a range of feeds and depths, improving evacuation and reducing the risk of chip-related interruptions. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and marks are used here for explanation only and do not imply any connection between Metav Werkzeuge and the manufacturers. The offered article is an original, factory-new product of the manufacturer.
P44280-1R08-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the proven Tiger·tec Gold technology combined with the WSM35G grade for secure chip control and extended tool life; order directly via Metav Werkzeuge or request application advice from our consultants. P44280-1R08-D57 WSM35G milling insert — Tiger·tec Gold, Walter Tools The P44280-1R08-D57 WSM35G is a coated carbide milling insert engineered for demanding machining of rostfreier Stahl and heat‑resistant superalloys, delivering stable cutting edges and reliable chip formation with the 1R08‑D57 chipbreaker Tiger·tec Gold coated carbide grade WSM35G Designed for rostfreier Stahl and superalloys Stable cutting edge for productive milling Consistent performance on difficult materials with Tiger·tec Gold The combination of the Tiger·tec Gold coating and the WSM35G grade gives the insert high thermal stability and improved wear resistance, which together reduce unplanned tool changes and machining interruptions. The coating technology forms a protective layer that limits adhesion and built‑up edge on reactive alloys; the result is a more predictable tool life and consistent component quality. The integrated 1R08‑D57 chipbreaker promotes controllable chip formation in demanding cuts, supporting higher metal removal rates without sacrificing surface integrity. Process security and productivity through a stable cutting geometry A stable cutting edge ensures repeatable results across batches. The insert’s geometry and grade support secure engagement in heavy feeds and interrupted cuts, increasing process security and enabling more productive milling cycles. Coated carbide delivers the rigidity and fracture resistance required for milling operations, while the coating helps maintain a sharp edge for longer. These factors combine to lower overall machining costs by extending tool life and reducing rework. Application guidance and material compatibility Specified for ISO material groups S and M, the insert is suitable for machining rostfreier Stahl (M) and heat‑resistant superalloys or titanium alloys (S). Depending on the chosen cutter body and machining strategy, the insert can be deployed for roughing and semi‑finishing where stable chip control and edge durability are priorities. For complex applications or specific workpiece alloys, consult technical documentation or Metav Werkzeuge’s advisors to align insert geometry and cutting parameters with production goals. Contact Metav Werkzeuge to discuss suitability for specific rostfreiem Stahl grades or superalloys and to arrange technical support or purchasing options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P44280-1R08-D57-WSM35G-WALTER Label: Fräswendeschneidplatte P44280-1R08-D57 WSM35G Walter Tools Series: Tiger-tec Gold Facts Grade: WSM35G Chipbreaker: 1R08-D57 Material suitability: S / M Special features Coating: Tiger·tec Gold coated carbide ISO designation: P44280-1R08-D57 WSM35G Suitable for: rostfreier Stahl (M), superalloys and titanium (S) Manufacturer: Walter Tools FAQ What materials is this insert intended for? The insert is intended for rostfreier Stahl (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S); the WSM35G grade is optimised for these applications. How does the Tiger·tec Gold coating benefit machining? The Tiger·tec Gold coating on the WSM35G grade increases thermal resistance and reduces adhesion, which improves wear resistance and maintains a stable cutting edge during continuous milling. Which chipbreaker is integrated and what does it deliver? The insert uses the 1R08‑D57 chipbreaker, designed to produce controllable chips and stable chip flow during heavy or interrupted milling, supporting higher metal removal rates. Can this insert be used for finishing operations? Depending on cutter geometry and cutting parameters, the insert can be used for semi‑finishing; its main strengths lie in secure chip formation and edge stability for tougher roughing tasks. Who supplies technical advice or purchasing support for this insert? Metav Werkzeuge provides application advice and purchasing support for Walter Tools inserts; contact info@metav-werkzeuge.com or +49 2822 7131930 for assistance. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P44280-1R10-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSM35G grade for durable, heat-resistant cutting in stainless steels and superalloys; the combination of a specialised chipbreaker and coated carbide ensures reliable chip control and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. P44280-1R10-D57 WSM35G milling indexable insert – Tiger·tec Gold for stainless steels and superalloys – Walter Tools A P44280-1R10-D57 WSM35G milling indexable insert designed to deliver stable cutting edges and secure chip formation when machining stainless steels and heat-resistant superalloys in demanding production environments Tiger·tec Gold coating for extended tool life WSM35G grade for stainless and superalloys Stable chip formation for consistent machining Coated carbide with high thermal resistance Longer tool life through advanced coating technology The Tiger·tec Gold multi-layer coating combines thermal resistance and wear protection to extend tool life in arduous milling operations. By reducing flank wear and improving heat management, the coating lowers the frequency of index changes and contributes to predictable process windows. For shops aiming to increase uptime and reduce overall tooling costs, this results in fewer interruptions and a steadier production flow. The coated carbide substrate supports high cutting temperatures, so consistent performance can be achieved even in sustained heavy cuts. Designed for stainless steels and heat-resistant alloys The WSM35G grade was formulated for materials classified as M and S under ISO 513, namely stainless steels and heat-resistant superalloys (including certain titanium applications). These materials typically generate high temperatures and tend to work-harden; the grade’s balance of toughness and wear resistance reduces the risk of edge chipping and built-up edge formation. The insert’s specification and geometry promote controlled cutting conditions that improve surface finish and dimensional consistency when facing the most challenging workpiece alloys. Precision chip control for reliable production Equipped with the 1R10-D57 chipbreaker, the insert ensures secure chip formation across a range of feeds and depths of cut. Stable chips reduce machining interruptions and protect the tool edge, supporting longer intervals between index rotations. The combination of chip control and the insert’s edge stability helps maintain consistent part quality, which is particularly valuable in batch production or when tight tolerances are required. Process planners will appreciate the reduced variability and the easier integration into automated machining cycles. Practical benefits and process integration Integration into existing toolholders and tool families is straightforward thanks to the insert’s industry-standard designation and geometry, simplifying inventory and tool management. The grade’s versatility across different stainless steel alloys and superalloys makes it a suitable choice for workshops that handle mixed production lots. For optimal results, pair the insert with cutting parameters tuned for heat management and incremental chip evacuation; doing so leverages the thermal resistance and stable cutting edge properties to their full advantage. Discuss application requirements with Metav Werkzeuge to specify the optimal Tiger·tec Gold WSM35G insert for production needs; email info@metav-werkzeuge.com or call +49 2822 7131930 to request technical guidance and availability Technical Data Article number: P44280-1R10-D57-WSM35G-WALTER Label: Fräswendeschneidplatte P44280-1R10-D57 WSM35G Walter Tools Product type: Milling indexable insert Facts Grade: WSM35G Series: Tiger·tec Gold Chipbreaker: 1R10-D57 Material groups: S / M Special features Coated carbide grade Tiger·tec Gold Suitable for stainless steels and superalloys ISO designation: P44280-1R10-D57 WSM35G Manufacturer: Walter Tools FAQ What materials is this insert suitable for? The WSM35G grade insert is suitable for stainless steels and heat-resistant superalloys; the specification supports machining of M and S material groups. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold coating improves thermal resistance and wear protection, which extends tool life and stabilises cutting performance under elevated temperatures. What is the function of the 1R10-D57 chipbreaker? The 1R10-D57 chipbreaker promotes controlled chip formation and helps prevent long, tangled chips, supporting uninterrupted machining and a stable cutting edge. Can this insert be used for finishing as well as roughing? Depending on the chosen geometry and cutting parameters, the insert can be applied to both roughing and finishing operations where the material demands heat-resistant performance. Is the insert compatible with standard milling holders? Yes, the ISO designation P44280-1R10-D57 WSM35G corresponds to industry-standard geometries and can be used in compatible toolholder systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenbezeichnungen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P44280-1R125-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Gold coating and the WSM35G grade for stable chip formation and extended tool life; ideal for machining stainless steel and heat‑resistant superalloys. Order the P44280‑1R125‑D57 WSM35G insert via Metav Werkzeuge or consult our advisors for application-specific recommendations. P44280-1R125-D57 WSM35G indexable milling insert — Tiger‑tec Gold grade for stainless steel and superalloys, Walter Tools The P44280‑1R125‑D57 WSM35G is an indexable milling insert engineered for heavy machining of stainless steel and other hard‑to‑cut materials, offering robust edge stability and predictable chip control. Tiger‑tec Gold coating for enhanced wear resistance WSM35G grade optimised for stainless steel and superalloys Stable carbide substrate for secure chip formation Compatible with standard P44280‑style tool holders Reliable performance for demanding materials The combination of the Tiger‑tec Gold technology and the WSM35G coated carbide microstructure provides a reliable solution when machining stainless steel and heat‑resistant alloys. This grade is formulated to resist the thermal and mechanical stresses typical of such materials, supporting a stable cutting edge and reduced flank wear. For workshop planning, this means fewer unscheduled tool changes and more consistent cycle times. The coating system improves wear resistance, which translates into longer effective tool life under intermittent high loads and elevated temperatures. Predictable chip formation for fewer disruptions Optimised geometry and the specified chipbreaker (1R125‑D57) ensure controlled chip flow and secure chip formation during milling operations. The chevron‑style chipbreaker and cutting edge design reduce the tendency for built‑up edge on stainless steel, improving surface integrity and decreasing the need for secondary finishing. For operators with varying cutter diameters, the insert’s design contributes to consistent chip behaviour across feeds, lowering the risk of tool damage and machine interruptions and helping to maintain process reliability. Practical integration into production workflows The insert fits P44280‑type toolholders and is straightforward to store and replace in industrial settings, supporting efficient tooling logistics. Its coated carbide base and robust grade make it suitable for central workshops and subcontractors who require repeatable performance across batches. Selection of this insert supports a rational approach to tooling: a single grade covers a broad spectrum of difficult materials, reducing the number of different inserts required and simplifying inventory management. The result is improved throughput and clearer process documentation for quality assurance. Contact Metav Werkzeuge to discuss Walter Tools Tiger‑tec Gold inserts and identify the optimal WSM35G configuration for stainless steel applications — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: P44280-1R125-D57-WSM35G-WALTER Description: Fräswendeschneidplatte P44280-1R125-D57 WSM35G Walter Tools Type: Fräswendeschneidplatte Grade: WSM35G Series: Tiger‑tec Gold Chipbreaker: 1R125-D57 Measurable data Material group: S / M Suitable for stainless steel: yes Special features Tiger‑tec Gold coated carbide grade Optimised for stainless steel and heat‑resistant alloys Stable chip formation and secure cutting edge FAQ Which materials is this insert intended for? The P44280‑1R125‑D57 WSM35G insert is intended primarily for stainless steel and heat‑resistant superalloys, with the WSM35G grade supporting secure chip formation and thermal stability. What does the WSM35G grade offer compared with standard grades? WSM35G, as used in the Walter Tools Tiger‑tec Gold series, provides enhanced wear resistance and improved edge stability for difficult‑to‑cut materials, extending useful tool life under challenging conditions. How does the 1R125‑D57 chipbreaker influence machining? The 1R125‑D57 chipbreaker promotes controlled chip segmentation and guided evacuation, reducing the risk of built‑up edge and improving surface finish when machining stainless steel and similar alloys. Is this insert compatible with standard P44280 holders? Yes — the geometry is designed for compatibility with P44280‑style toolholders, enabling straightforward integration into existing milling setups. Can this insert be used for roughing and finishing operations? The WSM35G grade and Tiger‑tec Gold coating are optimised for heavy machining and demanding cuts; depending on the chosen cutter geometry and feeds, the insert can perform well in robust roughing cycles and maintain acceptable surface quality for semi‑finishing. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand: Walter Tools) is part of a global group specialising in precision tools for metalworking and is recognised for high process reliability and consistent tool performance. Protected trademarks and trade names remain the property of their respective owners. Brand names are cited for explanation; there is no commercial connection between Metav Werkzeuge and the mentioned brands. The offered item is an original, factory‑new product from the manufacturer.
P44280-1R15-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WSM35G grade for extended tool life and consistent chip control; ideal where reliable machining of stainless steels and heat-resistant alloys is required. Order directly via Metav Werkzeuge or contact the technical consultants for application advice. P44280-1R15-D57 WSM35G indexable milling insert — Tiger·tec Gold, for stainless steel and superalloys — Walter Tools The P44280-1R15-D57 WSM35G is an indexable milling insert engineered for productive machining of stainless steel and heat-resistant superalloys in demanding industrial applications. *Tiger·tec Gold coating for enhanced wear resistance *Optimised for stainless steel and heat-resistant alloys *Stable cutting edge for productive milling Longer tool life through advanced coating and grade selection The combination of the Tiger·tec Gold coating and the WSM35G coated carbide grade delivers a marked improvement in wear resistance compared with uncoated grades. This technology reduces flank wear and preserves the cutting geometry for longer intervals between index changes, which translates into fewer tool changes and increased machine uptime. The coating supports heat resistance and adhesion control during heavy milling, helping to maintain dimensional repeatability on serial components. Reliable performance in difficult-to-machine materials Designed for the ISO material groups M and S, the insert is suited to stainless steel and heat-resistant superalloys or titanium alloys that tend to generate high cutting temperatures and work-hardening. The chipbreaker geometry 1R15-D57 promotes controlled chip formation, reducing the risk of built-up edge and enabling stable material removal rates. This stability supports predictable cycle times and helps to safeguard surface integrity on critical parts. Improved process efficiency and surface quality The insert’s geometry and grade are selected to combine effective chip control with a robust cutting edge, which benefits both throughput and final finish. By stabilising chip flow and reducing edge wear, the insert contributes to consistent surface roughness and fewer rework cycles. For production environments where component conformity and batch consistency matter, this yields a tangible reduction in scrap and improved overall equipment effectiveness. Compatibility and practical application guidance The indexable design fits typical milling toolholders specified for the ISO designation provided and is compatible with standard indexable tool clamping systems. The coated carbide construction enables higher cutting parameters compared with general-purpose grades when the machining strategy accounts for appropriate speeds, feeds and coolant practice. For users transitioning from general-purpose inserts, adjusting cutting data to exploit the WSM35G performance will quickly reveal efficiency gains. Contact Metav Werkzeuge today for tailored application advice and secure supply of Tiger·tec Gold WSM35G inserts via Metav Werkzeuge — request machining recommendations by phone or email Technical data Article number: P44280-1R15-D57-WSM35G-WALTER Designation: P44280-1R15-D57 WSM35G Brand: Walter Tools Series: Tiger·tec Gold Facts Geometry: 1R15-D57 Grade: WSM35G Material groups: M / S Product type: Indexable milling insert Special features Coating: Tiger·tec Gold Schneidstoffklasse: coated carbide Application: stainless steel, heat-resistant superalloys (M, S) Stable cutting edge and optimised chip formation FAQ What materials is this insert suitable for? The insert is intended for stainless steel and heat-resistant superalloys; the WSM35G grade is optimised for these ISO material groups. How does the Tiger·tec Gold coating benefit production? The Tiger·tec Gold coating increases wear resistance and thermal stability, leading to longer edge life and fewer index changes during milling. Is this geometry suitable for heavy milling operations? Yes. The 1R15-D57 chipbreaker geometry supports controlled chip formation and a stable cutting edge under higher material removal rates. Can this insert be used in standard indexable milling cutters? The insert follows common indexable milling insert conventions and is compatible with toolholders designed for its ISO designation. Where can application data or cutting parameters be obtained? Application recommendations for the P44280-1R15-D57 WSM35G can be provided by Metav Werkzeuge; they offer guidance on optimising speeds, feeds and coolant strategy. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Registered trademarks and trade names are the property of their respective owners. Brand names and registered product names are mentioned for explanatory purposes only. There is no affiliation between our company and the brands named. The offered item is an original, factory-new product from the manufacturer.
P44280-1R20-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the 1R20‑D57 chipbreaker geometry to secure stable chip formation and prolonged cutting edge life in heavy milling operations; order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. P44280-1R20-D57 WSM35G Fräswendeschneidplatte – Tiger·tec Gold coated carbide for rostfreier Stahl and superalloys | Walter Tools The P44280-1R20-D57 WSM35G is a milling indexable insert engineered for heavy‑duty roughing and medium finishing of rostfreier Stahl and heat‑resistant superalloys, combining a wear‑resistant coated carbide grade with a controlled chipbreaker for consistent chip control Tiger·tec Gold coated carbide Designed for rostfreier Stahl and superalloys Stable cutting edge for heavy machining Geometry 1R20‑D57 for controlled chip formation Improved machining stability and predictable tool life The combination of a coated carbide grade and the Tiger·tec Gold technology delivers enhanced thermal resistance and abrasive wear protection, which is crucial when machining materials that generate heat and strain the cutting edge. The insert’s 1R20‑D57 chipbreaker is designed to promote controlled chip formation, reducing the risk of built‑up edge and unplanned downtime. In practice, this means fewer tool changes, more consistent surface quality and a measurable improvement in process reliability during prolonged cycles. Optimised for rostfreier Stahl and high‑temperature alloys According to ISO group designations, the insert covers the needs of M‑group materials (rostfreier Stahl) and S‑group materials (heat‑resistant superalloys and titanium). These workpieces typically require tools that withstand high temperatures and resist edge degradation; the material and coating combination used here is formulated to meet those demands. By supporting secure chip evacuation and a stable cutting edge, the insert reduces the common problems of built‑up edge and rapid wear, making it suitable for demanding assemblies and aerospace or energy sector components. Practical application benefits and economic impact In milling centres and machining cells where reproducibility and throughput are priorities, this insert offers a balance between productivity and tool life. The robust grade minimises edge chipping in heavy cuts while the specialised chipbreaker aids coolant and chip flow. For procurement and process engineers, the result is a predictable tool consumption rate and fewer interruptions for regrinding or replacement. Technical advisors are available to advise on cutting data windows and suitable holder combinations to match specific machine and workpiece conditions. Contact Metav Werkzeuge for tailored recommendations on the Tiger·tec Gold WSM35G insert and to obtain parts optimised for rostfreier Stahl machining Technical Data Article number: P44280-1R20-D57-WSM35G-WALTER Designation: P44280-1R20-D57 WSM35G Type: Fräswendeschneidplatte (milling indexable insert) Series: Tiger-tec Gold Grade: WSM35G Manufacturer: Walter Tools Facts Geometry: 1R20‑D57 Material groups: S / M ISO application groups: M, S Special features Tiger·tec Gold coating technology Coated carbide grade (wear and heat resistant) Suitable for rostfreier Stahl and heat‑resistant superalloys Stable chip formation and controlled chipbreaker 1R20‑D57 Designed for heavy machining and improved process reliability FAQ Which materials are best machined with this insert? The insert is intended for rostfreier Stahl (ISO group M) and heat‑resistant superalloys (ISO group S); the WSM35G grade and Tiger·tec Gold coating provide thermal and wear resistance suited to these materials. What does the 1R20‑D57 geometry provide? The 1R20‑D57 chipbreaker is configured for controlled chip formation and reliable evacuation during heavy cuts, supporting consistent surface finish and reduced risk of built‑up edge. How does the WSM35G grade affect tool life? WSM35G is a coated carbide grade optimised to resist abrasive wear and thermal loading; in practice, this leads to a more stable cutting edge and extended usable life when machining challenging alloys. Is this insert suitable for finish as well as roughing? Depending on the toolholder and cutting parameters, the insert can be used for heavy roughing and medium finishing operations where the balance of edge stability and chip control is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter Tools is a brand of a global manufacturer of precision cutting tools. Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
P44280-2R25-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of coated carbide durability, reliable chip control and productive milling performance; this ensures a consistent process flow and fewer tool changes. Order the P44280-2R25-D57 WKP25S indexable insert directly via Metav Werkzeuge or consult our advisers for tailored machining guidance. P44280-2R25-D57 WKP25S indexable milling insert — Tiger·tec Silver for steel and cast iron — Walter Tools The P44280-2R25-D57 WKP25S is an indexable milling insert from the Tiger·tec Silver series, engineered for productive machining of steel and cast iron with a chipbreaker geometry optimised for controlled swarf evacuation. Coated carbide Tiger·tec Silver grade WKP25S Optimised for steel and cast iron machining Stable chip control and high process security Suitable for productive milling operations Faster, more consistent machining through advanced grade technology The Tiger·tec Silver coating combined with the WKP25S cutting grade offers enhanced wear resistance and thermal stability, resulting in extended service intervals and repeatable results. Designed for the ISO groups P (steel) and K (cast iron), the grade balances toughness and hardness so that the insert maintains cutting edge integrity during demanding milling. This technical balance reduces unexpected tool changes and supports predictable cycle times on CNC milling machines. Reliable swarf control and process security for higher uptime The 2R25-D57 chipbreaker geometry delivers stable chip control, which minimises entanglement and simplifies chip evacuation in continuous production runs. Fewer stoppages for clearing swarf translate into improved net throughput and a steadier surface quality. The coated indexable insert is therefore especially suitable where uninterrupted operation and consistent finish are priorities, helping to lower overall production costs through reduced machine idle time. Practical integration and application benefits in everyday machining The insert is compatible with standard indexable milling cutter systems and is intended for productive roughing and finishing tasks in workshops and production environments that process unalloyed and alloyed steel as well as cast iron. The combination of coating and substrate provides balanced performance across a broad materials spectrum, enabling simplified tooling inventories. For bespoke parameter recommendations or to match the insert to specific cutter bodies, Metav Werkzeuge’s technical team offers practical support and cutting data. Contact Metav Werkzeuge for application-specific recommendations and to source the Walter Tools P44280-2R25-D57 WKP25S insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: P44280-2R25-D57-WKP25S-WALTER Article label: Fräswendeschneidplatte P44280-2R25-D57 WKP25S Walter Tools Product type: Indexable milling insert Series: Tiger·tec Silver Grade: WKP25S Core technical data Coating technology: Tiger·tec Silver Substrate / material: Coated carbide Material groups: P / K Geometry / chipbreaker: 2R25-D57 Special features Optimised for steel and cast iron machining Stable chip control for continuous milling Designed for productive milling operations Brand: Walter Tools ISO designation: P44280-2R25-D57 WKP25S FAQ What materials is this insert designed for? The P44280-2R25-D57 WKP25S is designed primarily for steel (ISO group P) and cast iron (ISO group K) applications. How does the Tiger·tec Silver coating affect performance? The Tiger·tec Silver coating improves wear resistance and thermal management, extending the insert’s life and maintaining cutting performance under continuous milling loads. Is the insert suitable for high-volume production? Yes, the grade and 2R25-D57 chipbreaker are intended to provide stable chip control and process security in high-throughput milling operations. Can this insert be used in standard indexable cutter bodies? The insert is compatible with common indexable milling cutter systems; matching the insert to the correct cutter body is recommended for optimal results. Where can cutting data and parameter recommendations be obtained? Cutting data and application-specific advice are available from Metav Werkzeuge; their technical team can recommend speeds, feeds and clamping arrangements. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names belong to their respective owners. The referenced brand names and trademarks are used for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the manufacturer.
P44280-2R25-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating, the WSM35G carbide grade and the 2R25-D57 chipbreaker for stable edge life and reliable machining of stainless steels and heat-resistant superalloys; order the insert directly via Metav Werkzeuge or consult the specialists for process adaptation. P44280-2R25-D57 WSM35G indexable milling insert — Tiger·tec Gold, Walter Tools The P44280-2R25-D57 WSM35G is an indexable milling insert developed for heavy-duty machining of stainless steels and heat-resistant superalloys, combining a robust coated carbide grade with a defined chip control geometry. Tiger·tec Gold coated carbide grade WSM35G Stable chip control with 2R25-D57 breaker Engineered for stainless steels and superalloys Confident machining of difficult alloys with reduced risk of build-up The Tiger·tec Gold coating in combination with the WSM35G grade provides enhanced wear resistance and improved thermal stability, which is particularly beneficial when working with stainless steels that tend to work-harden and generate heat. The coating technology supports consistent cutting-edge performance, reducing the risk of built-up edge and maintaining dimensional accuracy over longer tool life. This results in fewer interruptions and more predictable production runs for high-alloy components. Stable chip formation and process reliability The 2R25-D57 chipbreaker is designed to promote controlled chip formation for a wide range of feeds and depths of cut, improving evacuation and reducing the likelihood of entanglement or recutting. Stable chip control lowers the risk of surface damage and tool failure, which in turn supports higher process reliability and repeatable quality in serial production. The insert geometry contributes directly to consistent surface finish and secure chip handling in constrained toolpaths. Robust grade for heat-resistant materials and titanium alloys The grade supports machining of the ISO groups M and S, meaning it is suitable for rostfreie Stähle (stainless steels) and heat-resistant superalloys or titanium, which place high thermal and mechanical loads on the cutting edge. The combination of a coated cemented carbide substrate and the Tiger·tec Gold surface treatment increases oxidation resistance and edge stability, enabling productive cutting parameters where uncoated grades would wear prematurely. Practical integration in tool systems and predictable indexability The insert’s designation and geometry allow straightforward integration into compatible milling cutters that accept P44280-series inserts, ensuring simple indexing and replacement during service. Consistent insert seating and repeatable clamping contribute to process security and reduce set-up variability, which is important for repeatable part quality and efficient workshop routines. Specification-driven selection helps to match the insert with appropriate holder geometries and coolant strategies. For reliable machining of stainless steels and heat-resistant alloys with Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the optimal insert and cutter combination for the application Technical data Article number: P44280-2R25-D57-WSM35G-WALTER Designation: P44280-2R25-D57 WSM35G Manufacturer: Walter Tools Product type: Indexable milling insert Core data Grade: WSM35G Series: Tiger·tec Gold Chipbreaker: 2R25-D57 Applicable ISO material groups: M, S Special features Coated cemented carbide Optimised for stainless steels and superalloys Designed for stable chip formation and edge life Indexable geometry for secure clamping FAQ Is this insert suitable for machining stainless steels? Yes. The P44280-2R25-D57 WSM35G insert from Walter Tools is designed specifically for ISO group M, making it suitable for machining stainless steels where thermal stability and controlled chip formation are required. Can the insert handle superalloys and titanium? The insert is rated for ISO group S and supports machining heat-resistant superalloys and titanium alloys, offering enhanced edge stability thanks to the Tiger·tec Gold coating and the WSM35G grade. What does the chipbreaker 2R25-D57 achieve? The 2R25-D57 chipbreaker promotes controlled chip formation and efficient evacuation, reducing the risk of recutting and improving process reliability when using the Walter Tools insert. Which series and coating technology does this grade belong to? This insert belongs to the Tiger·tec Gold series; the coated carbide grade WSM35G combines surface treatment and substrate properties to extend tool life under high thermal and mechanical stress. How is the insert integrated into milling systems? The P44280-series designation signals compatibility with milling cutters that accept this family of indexable inserts, allowing straightforward indexing, repeatable seating and reliable clamping for Walter Tools applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Walter AG (brand: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names and protected terms are used solely for explanation purposes. There is no affiliation between our company and the mentioned brands. The offered item is an original, factory-new product of the manufacturer.
P44280-2R30-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the WSM35G grade ensures a stable cutting edge and reliable chip control when machining rostfreier Stahl and heat‑resistant alloys; the 2R30‑D57 chipbreaker further promotes predictable swarf removal. Order the P44280‑2R30‑D57 WSM35G directly via Metav Werkzeuge or request application support from our specialists. P44280-2R30-D57 WSM35G — Milling indexable insert, Tiger·tec Gold — Walter Tools P44280-2R30-D57 WSM35G is a milling indexable insert designed for heavy machining of rostfreier Stahl and high‑temperature superalloys, combining a coated carbide grade with a dedicated chipbreaker for enhanced process stability Tiger·tec Gold coating for heat resistance Grade WSM35G for rostfreier Stahl & superalloys Chipbreaker 2R30‑D57 for consistent chip control Robust edge stability for demanding operations Improved performance on difficult‑to‑machine alloys The WSM35G grade is a coated carbide developed within the Tiger·tec Gold family and engineered for applications involving rostfreier Stahl and heat‑resistant alloys. This combination provides enhanced thermal stability and wear resistance compared with uncoated grades, which translates into longer in‑service life and fewer interruptions for tool changes. For milling operations where temperature and built‑up edge are a concern, the insert’s coating supports a more consistent cutting action and helps maintain dimensional accuracy across batches. Predictable chip formation and secure machining The integrated chipbreaker 2R30‑D57 is designed to control swarf geometry and evacuation in heavy cutting conditions. By shaping chips reliably, the chipbreaker reduces the risk of tangled swarf and improves surface finish, particularly when processing tough matrices such as nickel‑based alloys and titanium. The insert’s combination of geometry and coated carbide substrate delivers stable cutting edges, which assists in achieving repeatable results and minimises downtime caused by erratic chip behaviour or premature edge failure. Process benefits and application guidance Using this indexable insert in a suitably rigid toolholder and with appropriate cutting parameters supports higher process security and productivity. The coated grade is optimised to withstand thermal and mechanical loads encountered in roughing and semi‑finishing passes on hard materials; depending on the cutter geometry, the same insert can be effective for precision passes on rostfreier Stahl. When integrating the insert into a machining process, start from conservative speeds and increase gradually while monitoring tool life and surface quality to find the optimal balance between throughput and longevity. Contact Metav Werkzeuge today for tailored machining advice on the P44280-2R30-D57 WSM35G — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability and availability Technical Data Article number: P44280-2R30-D57-WSM35G-WALTER Designation: P44280-2R30-D57 WSM35G Product type: Milling indexable insert Manufacturer: Walter Tools Facts Grade: WSM35G Series: Tiger·tec Gold Chipbreaker: 2R30‑D57 Material compatibility code: S / M Special features Coating: Tiger·tec Gold (coated carbide) Suitable for: rostfreier Stahl, heat‑resistant superalloys, titanium (depending on geometry) Application focus: Heavy machining, secure chip formation Typical benefit: Stable cutting edge and improved process security FAQ What materials is this insert designed to machine? The P44280‑2R30‑D57 WSM35G insert is formulated for machining rostfreier Stahl and heat‑resistant superalloys (S) and, depending on insert geometry, can also be applied to titanium workpieces. How does the 2R30‑D57 chipbreaker affect machining? The 2R30‑D57 chipbreaker on this Walter Tools milling insert shapes chips to promote consistent evacuation and reduce swarf tangling, improving surface finish and process reliability. Is the WSM35G grade coated or uncoated? WSM35G is a coated carbide grade from the Tiger·tec Gold family, offering enhanced thermal and wear resistance for demanding milling tasks. Can the insert be used for both roughing and finishing? This grade and geometry are primarily intended for heavy‑duty and semi‑finishing operations; depending on cutter and machine rigidity, the insert may also be used for precision passes on rostfreier Stahl. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (brand presentation: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik Group. Protected trademarks and trade names remain the property of their respective owners and are mentioned for explanation only. There is no connection between our company and the named brands. The offered item is original, factory‑new goods of the manufacturer.
P44280-2R40-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, the WSM35G grade and a controlled 2R40-D57 chipbreaker for reliable machining of stainless steels and heat-resistant superalloys; order or request advice via Metav Werkzeuge for seamless integration into production. P44280-2R40-D57 WSM35G milling indexable insert – Tiger·tec Gold, 2R40-D57 | Walter Tools The P44280-2R40-D57 WSM35G is a milling indexable insert designed for demanding applications in stainless steels and heat-resistant superalloys, offering a combination of edge stability and controlled chip formation. Tiger·tec Gold coating for high temperature stability WSM35G grade for stainless and superalloys 2R40-D57 chipbreaker for reliable chip control High edge stability for productive machining Stable machining of stainless steels and superalloys The WSM35G cutting grade is a coated carbide developed for challenging materials. As a result, the insert provides stable cutting edges and consistent performance when machining stainless steels and superalloys, which are prone to work-hardening and high thermal loads. The combination of a coated substrate and a geometry engineered for heat resistance reduces the tendency for built-up edge and supports repeatable component quality, making it suitable for serial production where process security is essential. Coating and chip control for improved process security The Tiger·tec Gold technology enhances thermal and wear resistance, so the insert sustains abrasive and adhesive wear longer under heavy cutting conditions. The integrated 2R40-D57 chipbreaker shapes and divides chips reliably, improving evacuation and reducing recutting. This results in better surface finishes and fewer interruptions for chip clearing. For workshops seeking predictable cycle times, these features translate into fewer rejects and reduced operator intervention during running shifts. Productivity gains through longer tool life and consistent results Using a grade that balances toughness and wear resistance supports productive machining by extending tool life and maintaining stable cutting forces. The insert’s design reduces downtime for tool changes and keeps machine utilisation high. For process planners, the clear specification of grade and chipbreaker simplifies selection: the coated carbide grade is the technical basis for choosing cutting parameters that aim for efficiency and reproducibility. Where geometry choices are critical, pairing this insert with the correct cutter body ensures optimal chip flow and repeatable surface quality. Contact Metav Werkzeuge for tailored selection and immediate availability of Walter Tools Tiger·tec Gold inserts; the Metav technical team provides application advice by phone or email to help integrate the insert into existing tooling systems Technical Data Article number: P44280-2R40-D57-WSM35G-WALTER Item label: Fräswendeschneidplatte P44280-2R40-D57 WSM35G Walter Tools Manufacturer: Walter Tools ISO designation: P44280-2R40-D57 WSM35G Facts Grade: WSM35G Series: Tiger-tec Gold Chipbreaker: 2R40-D57 Material group: S / M Special features Coating technology: Tiger·tec Gold (coated carbide) Intended application: machining of stainless steels and heat‑resistant superalloys Product type: milling indexable insert SKU / UID: P44280-2R40-D57-WSM35G-WALTER FAQ Which materials is this insert suitable for? The P44280-2R40-D57 WSM35G insert is specified for stainless steels and heat‑resistant superalloys (ISO groups S and M) and is engineered to support secure chip formation in these demanding materials. How does the 2R40-D57 chipbreaker affect machining? The 2R40-D57 chipbreaker on this Walter Tools insert shapes chips to improve evacuation and reduce recutting, which leads to more consistent surface finish and fewer process interruptions. What advantages does the WSM35G grade offer over standard grades? WSM35G, part of the Tiger·tec Gold family, combines a coated carbide substrate with enhanced thermal resistance and edge stability, offering longer tool life and improved process reliability in difficult-to-machine materials. Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Mentioned brand names, including Walter Tools, are used for product identification and explanatory purposes only. There is no affiliation or partnership implied between our company and the brand owners. The offered article is original, factory-new merchandise of the respective manufacturer.
P44290-1R08-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the durable Tiger‑tec Silver coating and the WKP25S carbide grade to ensure consistent chip control and prolonged tool life in mixed production of steel and cast iron; order directly via Metav Werkzeuge or consult their technical team for application-specific recommendations and cutting data. P44290-1R08-D57 WKP25S – milling insert, Tiger‑tec Silver, Walter Tools The P44290-1R08-D57 WKP25S is a coated milling insert designed for efficient machining of steel and cast iron in industrial production. Tiger‑tec Silver coating technology Coated carbide grade WKP25S Optimised for steel and cast iron machining Stable cutting edge for extended tool life Increased productivity through reliable coating and grade The combination of the Tiger‑tec Silver coating and the WKP25S carbide grade delivers predictable performance when machining ISO groups P (steel) and K (cast iron). The coated carbide layer enhances wear resistance and reduces flank wear under typical cutting temperatures, which translates into longer tool life and fewer index changes on toolholders. For production environments where consistent surface finish and low downtime are priorities, this insert provides a stable cutting edge and improved process reliability. Better chip control and reduced secondary operations Optimised chip formation is a core advantage of the insert’s geometry and chipbreaker specification 1R08-D57. The geometry helps to break and evacuate chips effectively in both long-chipping steels and the more brittle chips from cast components, reducing the risk of workpiece damage and machine interruptions. Clear chip control supports smoother feed rates and can lower the need for manual chip management, contributing to a more continuous and cost-effective machining workflow. Practical benefits for workshop and production planners Selecting an insert from a proven series like Tiger‑tec Silver means easier tool selection and consistent results across batches. The grade is engineered for a wide material coverage—primarily steel and cast iron—so fewer tool changes are required when switching between these materials. The reputable brand backing ensures adherence to industrial standards and repeatable performance in high-volume milling tasks, supporting predictable planning and reduced scrap rates. For tailored recommendations on cutter selection, compatible toolholders and cutting data, contact Metav Werkzeuge – they provide practical advice and can supply the P44290-1R08-D57 WKP25S insert directly; eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number/SKU: P44290-1R08-D57-WKP25S-WALTER Designation: P44290-1R08-D57 WKP25S Product type: Milling insert (indexable insert) Grade/Sort: WKP25S Series: Tiger‑tec Silver Chipbreaker: 1R08-D57 Material compatibility: P / K Data ISO material groups: P (steel), K (cast iron) Coating: Tiger‑tec Silver (coated carbide) Sort description: coated carbide grade for steel and cast iron Special features Stable cutting edge geometry for continuous milling Broad workpiece material coverage (steel and cast iron) Manufacturer: Walter Tools Label: Fräswendeschneidplatte P44290-1R08-D57 WKP25S Walter Tools FAQ Which materials are best machined with this insert? The P44290-1R08-D57 WKP25S insert is designed primarily for steel (ISO group P) and cast iron (ISO group K), providing optimised wear resistance and chip control for these material families. Is the insert suitable for roughing and finishing operations? The WKP25S grade and the Tiger‑tec Silver coating allow the insert to be used across a range of milling tasks; geometry and cutting parameters will determine whether it is best applied to roughing or finishing in a specific setup. What does the chipbreaker code 1R08-D57 indicate? The chipbreaker designation 1R08-D57 describes the insert’s flute and edge geometry designed to control chip shape and evacuation under typical milling conditions for steel and cast iron when using the P44290-1R08-D57 WKP25S insert. Can this insert be used interchangeably with other Tiger‑tec Silver grades? WKP25S is optimised for general steel and cast iron applications; alternate Tiger‑tec Silver grades may be selected for specialised tasks—compare grade characteristics for the best match to the machining requirements. How does the Tiger‑tec Silver coating benefit production runs? The Tiger‑tec Silver coating improves thermal and abrasive wear resistance, which helps maintain edge integrity during extended cuts and supports consistent surface quality over longer runs. Trademarks and trade names are the property of their respective owners. Brand names and protected trade marks are mentioned solely for explanatory purposes. There is no connection between our company and the mentioned brands. The offered item is an original, factory-new product from the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P44290-1R08-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high process security, durable cutting performance and optimised chip control for efficient milling of challenging alloys; order directly via Metav Werkzeuge or consult the technical team for application advice. P44290-1R08-D57 WSM35G — Fräswendeschneidplatte, Tiger-tec Gold, for rostfreier Stahl & superalloys (Walter Tools) The P44290-1R08-D57 WSM35G is an indexable milling insert designed for productive machining of rostfreier Stahl and heat‑resistant superalloys, offering a coated carbide grade optimised for thermal stability. Tiger‑tec Gold coating for extended tool life WSM35G grade for tough, heat‑resistant materials 1R08‑D57 chipformer for secure chip control Robust cutting edge for consistent performance Constant performance when machining tough alloys The combination of a Tiger‑tec Gold coating and the WSM35G grade provides thermal and wear resistance for machining rostfreier Stahl and high‑temperature superalloys. This engineered coating reduces flank wear and supports a stable cutting edge under elevated temperatures, which translates into longer tool life and fewer interruptions in production. The technical design prioritises predictable performance over long runs, enabling consistent component quality and reduced tool changes. Efficient chip formation that boosts throughput The 1R08‑D57 chipbreaker geometry is crafted to ensure controlled chip formation when cutting ductile and work‑hardening materials. Optimised chip control reduces recutting and minimises the risk of built‑up edge, improving surface finish and dimensional stability. By stabilising the chip flow, the geometry supports higher metal removal rates and lowers cycle times, which contributes to improved shopfloor efficiency and a better cost‑per‑part ratio. Broad applicability and easy integration into existing processes Suited for applications classed under ISO groups M and S, the insert supports machining tasks involving rostfreier Stahl, heat‑resistant superalloys and titanium alloys where thermal resistance and edge stability are critical. The coated carbide construction enables reliable performance in interrupted cuts and demanding contours. Integration into standard milling toolholders is straightforward, and predictable wear behaviour simplifies process planning and inventory management. Contact Metav Werkzeuge today for tailored recommendations on using Walter Tools Tiger‑tec Gold inserts in specific rostfreier Stahl or superalloy applications and for assistance with cutter and insert selection Technical Data Article number: P44290-1R08-D57-WSM35G-WALTER Product type: Fräswendeschneidplatte Manufacturer: Walter Tools Facts Series: Tiger‑tec Gold Grade: WSM35G Chipformer: 1R08‑D57 Material suitability: S / M Special features Coated carbide grade with Tiger·tec Gold technology Designed for rostfreier Stahl and heat‑resistant superalloys Stable cutting edge and optimised chip control FAQ What materials is this insert suitable for? The P44290-1R08-D57 WSM35G is intended for machining rostfreier Stahl and heat‑resistant superalloys, with the grade and coating optimised for thermal stability and secure chip formation. How does the Tiger‑tec Gold coating benefit machining? Tiger‑tec Gold enhances wear resistance and thermal protection on the coated carbide substrate, which helps the insert maintain a stable cutting edge and consistent performance in demanding operations. What role does the 1R08‑D57 chipformer play? The 1R08‑D57 geometry controls chip shape and evacuation, reducing the risk of built‑up edge and improving surface finish while supporting higher metal removal rates. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P44290-1R10-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Silver coating and the WKP25S grade for extended tool life and consistent chip control with the 1R10‑D57 geometry; the result is reliable, productive milling of steel and cast iron. Order the insert directly via Metav Werkzeuge or request application advice from our consultants. P44290-1R10-D57 WKP25S milling insert — Tiger·tec Silver, for steel & cast iron (Walter Tools) The P44290-1R10-D57 WKP25S is a coated carbide milling insert designed for productive machining of steel and cast iron with a dedicated chipbreaker for stable chip formation Tiger·tec Silver coated carbide for long life Optimised for steel and cast iron machining 1R10‑D57 chipbreaker for stable chip control WKP25S grade for reliable wear resistance Boosted tool life through advanced coating and grade The combination of the Tiger·tec Silver coating with the WKP25S grade improves resistance to abrasive and adhesive wear, extending service intervals and reducing downtime. Coated carbide provides a thermal barrier and lowers friction at the cutting edge, which in practice means longer uninterrupted machining cycles and fewer tool changes. For operations where repeatability matters, this results in a more predictable component quality and reduced secondary operations. Safer, more efficient milling thanks to targeted chip control The insert’s 1R10‑D57 chipbreaker geometry produces short, controllable chips when machining both steel and cast iron, reducing the risk of entanglement and tool damage. Stable chip formation also supports higher uninterrupted cutting parameters and smoother evacuation in pockets or slots. Describing chipbreaker function simply: it directs and breaks the chips to manageable segments, helping to protect the workpiece surface and the cutting edge while increasing throughput. Broad machining scope with process security and ease of use Designed for ISO groups P and K, this indexable tool suits a wide range of unalloyed and alloyed steel grades as well as various cast iron materials. The insert’s balanced geometry supports consistent cutting forces and reliable surface finish, making it appropriate for general milling tasks in job shops and production environments alike. Compatibility with standard Walter toolholders ensures straightforward integration into existing toolsets and keeps set-up time minimal. For tailored tooling recommendations and swift supply of Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for application support and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: P44290-1R10-D57-WKP25S-WALTER Article: P44290-1R10-D57 WKP25S Label: Fräswendeschneidplatte P44290-1R10-D57 WKP25S Walter Tools Brand: Walter Tools Facts Designation: P44290-1R10-D57 Chipbreaker: 1R10‑D57 Grade: WKP25S Series: Tiger·tec Silver UID: P44290-1R10-D57-WKP25S-WALTER Materials & features Coating: Tiger·tec Silver Suitable for: P (steel), K (cast iron) Material composition: coated carbide Product type: milling indexable insert FAQ What materials can be machined with this insert? The insert is suitable for ISO group P (steel) and K (cast iron); the WKP25S grade and Tiger·tec Silver coating are optimised for these material families. How does the 1R10‑D57 chipbreaker improve milling performance? The 1R10‑D57 geometry produces short, controlled chips that improve evacuation and reduce edge stress, supporting higher productive cutting parameters with consistent surface results. Is this insert compatible with standard Walter milling holders? Yes, the insert matches common Walter toolholder interfaces for milling applications and integrates easily into existing tooling systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no connection between our company and the brands named. The offered item is an original, brand‑new product from the manufacturer.
P44290-1R125-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, the WKP25S grade and proven chip control for more productive milling of steel and cast iron; order directly via Metav Werkzeuge or contact our consultants for application advice. P44290-1R125-D57 WKP25S milling indexable insert – high‑performance grade for steel and cast iron by Walter Tools P44290-1R125-D57 WKP25S is a coated milling insert designed for efficient material removal in steel and cast iron applications Tiger·tec Silver coated grade WKP25S Coated carbide for high wear resistance Optimised chipbreaker 1R125-D57 for reliable chips Suited for steel and cast iron machining Faster, more reliable machining for steels and cast irons The WKP25S grade, part of the Tiger·tec Silver family, is a coated carbide solution engineered for the thermal and abrasive challenges of machining steel and cast iron. The coating improves heat resistance and reduces flank wear, which translates into longer tool life and fewer tool changes in series production. In practice, this means more consistent cycle times and a higher overall throughput in light to heavy milling operations. The insert’s metallurgy and coating behaviour also help to maintain a steady cutting edge under the typical temperatures encountered when cutting unalloyed and alloyed steel, delivering predictable performance across varying feed rates. Controlled chip formation and surface quality with defined geometry The integrated chipbreaker 1R125-D57 geometry enhances chip control and reduces the risk of built-up edge, particularly when machining short to medium chips in cast iron and tougher steels. Better chip management lowers the chance of re-cutting and machine interruption, which supports stable process windows and improved part finish. The insert geometry has been developed to balance cutting forces and surface interaction, helping to produce consistent component tolerances and a reliable surface finish even on longer runs. Clear chip evacuation also assists coolant access and reduces thermal spikes on the cutting edge, which benefits both tool life and component integrity. Easy integration into production and measurable productivity gains Designed for use in standard milling cutter bodies, this insert offers straightforward replacement and reproducible results, which simplifies tool management in the workshop. The combination of Tiger·tec Silver technology and the WKP25S grade provides a cost‑effective solution where longevity and process security are priorities. For production environments aiming to reduce downtime and increase parts per hour, the grade delivers a quantifiable advantage: fewer tool changes and steadier performance under fluctuating cutting conditions. Process engineers will find the insert particularly useful when looking to standardise on a single grade for mixed batches of steel and cast iron components. For application advice or to discuss cutter compatibility, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our team will help select the optimal grade and geometry for the task. Technical data Article number: P44290-1R125-D57-WKP25S-WALTER Label: Fräswendeschneidplatte P44290-1R125-D57 WKP25S Walter Tools UID: P44290-1R125-D57-WKP25S-WALTER Manufacturer: Walter Tools Facts Designation: P44290-1R125-D57 Chipbreaker: 1R125-D57 Grade: WKP25S Series: Tiger·tec Silver Special features Coating: Tiger·tec Silver Base material: coated carbide Suitable for: steel (P) and cast iron (K) according to ISO 513 Product type: milling indexable insert FAQ Which materials can this insert machine reliably? The P44290-1R125-D57 WKP25S insert from Walter Tools is specified for steel and cast iron applications and is optimised for the typical heat and chip formation of these materials. What benefit does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal resistance and wear performance on the WKP25S grade, extending cutting edge life and stabilising machining results. How does the 1R125-D57 chipbreaker affect production? The 1R125-D57 chipbreaker improves chip control and evacuation, reducing interruptions and supporting consistent surface quality during long runs. Is this insert suitable for high‑feed or roughing operations? The combination of the WKP25S grade and robust chipbreaker makes the insert well suited to productive roughing and general milling tasks in steel and cast iron where tool life and process security are required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; Protected trademarks and product names are the property of their respective owners. Mention of brand names is for explanation only and does not imply any affiliation between our company and the listed brands. The offered item is original, factory‑new goods of the manufacturer.
P44290-1R20-D57 WKP25S Wendeplatten - Walter Tools
High productivity from the WKP25S grade and the Tiger‑tec Silver coating combines with optimised chip control for consistent results; order the P44290-1R20-D57 WKP25S directly via Metav Werkzeuge or ask our consultants if needed. P44290-1R20-D57 WKP25S – Milling indexable insert, Tiger‑tec Silver coated, for steel and cast iron | Walter Tools A robust milling indexable insert designed for medium to heavy machining of steel and cast iron, the P44290-1R20-D57 WKP25S delivers consistent cutting performance and predictable tool life. Tiger‑tec Silver coated grade WKP25S Optimised chipbreaker 1R20‑D57 Suitable for steel and cast iron Reliable productivity through material‑specific grade design The WKP25S grade is a coated carbide developed to balance wear resistance and edge stability when machining steel and cast iron. Its coating technology, Tiger‑tec Silver, reduces friction at the cutting zone, which helps maintain cutting speeds and extend tool life. For shops aiming to increase throughput, this results in fewer insert changes and steadier process windows. The term "coated carbide" refers to a hardmetal substrate with a thin, engineered surface layer that improves adhesion and thermal resistance compared with uncoated grades. Improved process security with optimised chip control The 1R20‑D57 chipbreaker geometry is engineered for reliable chip formation across common steel and cast‑iron grades. Controlled chips reduce the risk of rework and machine downtime by preventing long, stringy chips and promoting easy evacuation. In practice, this means more predictable surface finish and consistent dimensional results during serial production. For operations without specialised chip handling, the combination of grade and chipbreaker significantly simplifies daily machining routines. Practical benefits for workshop efficiency and quality Using a dedicated indexable insert tailored to the workpiece groups P (steel) and K (cast iron) improves both economy and component quality. The insert’s design supports stable cutting edges and consistent tool life, which contributes to lower cycle times and reduced scrap rates. For engineers evaluating tool choices, this insert offers a convincing compromise between cost per cutting edge and overall machining reliability—factors that directly affect delivery capability and customer satisfaction. For personalised advice on integrating the Tiger‑tec Silver WKP25S into a production process or to arrange supply via Metav Werkzeuge, please contact Metav Werkzeuge for expert guidance and prompt handling. Technical data Article number: P44290-1R20-D57-WKP25S-WALTER Part designation: P44290-1R20-D57 Product type: Milling indexable insert Manufacturer: Walter Tools Facts Grade: WKP25S Series: Tiger‑tec Silver Chipbreaker: 1R20‑D57 Material groups: P / K Special features Coating: Tiger‑tec Silver (coated carbide) Application: Steel, Cast iron Optimised for stable chip formation Designed for productive serial machining FAQ What materials is this insert suitable for? The P44290-1R20-D57 WKP25S insert is suitable for machining steel (P) and cast iron (K) in accordance with its grade and geometry. How does the Tiger‑tec Silver coating help performance? The Tiger‑tec Silver coating on the WKP25S improves thermal resistance and reduces friction, which in turn supports longer tool life and consistent cutting conditions. What does the chipbreaker designation 1R20‑D57 indicate? The 1R20‑D57 designation describes the insert’s chip control geometry; it is tuned to produce short, controllable chips for the intended material groups. Can this insert be used for finishing operations? Yes, the grade and chipbreaker combination provide a balance between wear resistance and edge stability that can deliver good surface finishes in many finishing and semi‑finishing applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The item offered is an original, factory‑new product of the manufacturer Walter Tools.
P44290-2R25-D57 WKP25S Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Silver coating and the WKP25S grade for reliable wear resistance and consistent chip control in steel and cast iron machining; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. P44290-2R25-D57 WKP25S milling insert – Tiger·tec Silver coated, for steel & cast iron (Walter Tools) A P44290-2R25-D57 WKP25S indexable milling insert engineered for productive machining of steels and cast iron, combining a coated carbide grade with a chipbreaker geometry tailored to stable chip formation and process reliability. Tiger·tec Silver coated carbide Optimised for steel machining Suitable for cast iron components Chipbreaker 2R25-D57 for stable chips Maximise throughput on steel and cast iron The combination of the Tiger·tec Silver coating with the WKP25S carbide grade provides a balance of wear resistance and toughness that is particularly suited to the thermal and mechanical demands of machining steel (ISO group P) and cast iron (ISO group K). The coating reduces abrasive wear and helps maintain cutting-edge integrity under the high temperatures commonly encountered in production runs. For production environments where uptime and repeatable part quality matter, this specification supports longer tool life and fewer index changes, which contributes directly to lower overall machining costs per component. Consistent edge life and process security Coated cemented carbide in the WKP25S class was developed to offer predictable performance across a range of common steels and cast irons. The material and coating combination improves edge life and reduces the frequency of unplanned interruptions due to wear-related edge failure. This leads to greater process security, with more predictable tool-change intervals and stable dimensional results. The insert’s design aims to ensure economical performance over series production, helping to maintain surface quality and part tolerances without excessive tooling overhead. Controlled chip formation for stable productivity The chipbreaker 2R25-D57 is engineered to influence chip geometry and evacuation in interrupted and continuous cuts. By promoting short, controllable chips, the geometry reduces the risk of chip entanglement and improves safety at higher cutting speeds. Effective chip control also assists in preserving surface finish and in maintaining consistent cutting forces, which benefits machine tool spindle life and fixture stability. For operators less familiar with chipbreaker nomenclature: this designation identifies the insert’s groove and facet geometry, optimised for a balance of shear and compression suited to P and K materials. Practical application and compatibility overview This indexable milling insert is supplied as a standard plate designed for versatile incorporation into common milling tool bodies where the specific seat and clamping system accept the P44290-series geometry. The main application is catalogue- and geometry-dependent, meaning the cutting performance will be governed by the chosen tool holder, entry conditions and machine rigidity. For unfamiliar set-ups, matching the WKP25S grade and Tiger·tec Silver coating to the machining strategy offers a reliable starting point for achieving repeatable productivity and stable surface integrity. For tailored advice on inserting the P44290-2R25-D57 WKP25S into an existing tool system or to discuss recommended cutting parameters for specific steel or cast iron grades, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: P44290-2R25-D57-WKP25S-WALTER Product designation: Fräswendeschneidplatte (milling insert) Grade: WKP25S Series: Tiger·tec Silver Chipbreaker: 2R25-D57 Material indication: P / K (steel / cast iron) Core data Applicable material groups: P (steel), K (cast iron) Coating technology: Tiger·tec Silver (coated carbide) Brand: Walter Tools Special features Coated cemented carbide for wear resistance Optimised for abrasive wear and short, breaking chips Designed for stable process behaviour in production environments FAQ What materials is this insert intended for? The P44290-2R25-D57 WKP25S insert is intended primarily for steel (ISO P) and cast iron (ISO K) machining, reflecting the grade and coating combination. What advantages does Tiger·tec Silver provide? Tiger·tec Silver is a coating technology applied to cemented carbide that enhances abrasive-wear resistance and thermal stability, improving edge life and consistent performance in the relevant material groups. What is the function of the 2R25-D57 chipbreaker? The 2R25-D57 chipbreaker shapes chip flow to produce short, controllable chips and to assist in evacuation from the cutting zone, supporting surface quality and reducing the risk of chip-related interruptions. Is this insert suitable for finishing operations? Finishing suitability depends on the specific tool geometry and the depth of cut; the WKP25S grade can be used in a range of operations, but the final surface finish will be influenced by the chosen holder and cutting parameters. Can the insert be re-sharpened or reconditioned? Indexable inserts of this type are typically not re-sharpened; performance is achieved through replacing with a new insert of the same grade and geometry to maintain process reliability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany; www.walter-tools.com Trademarks and trade names are the property of their respective owners. Brand names are used for explanation only and imply no affiliation between Metav Werkzeuge and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
P44290-2R30-D57 WKP25S Wendeplatten - Walter Tools
Benefit from the Tiger‑tec Silver coating and the WKP25S grade for extended tool life and reliable chip control in steel and cast iron machining; the result is fewer changeovers and steadier productivity. Order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. P44290-2R30-D57 WKP25S milling indexable insert for steel and cast iron – Walter Tools The P44290-2R30-D57 WKP25S is a high-performance milling insert engineered for precision finishing and roughing of steel and cast iron components. Tiger‑tec Silver coating for extended tool life WKP25S grade optimised for steel and cast iron Stable chip formation and abrasive wear resistance Compatible with standard milling toolholders Increased throughput through predictable chip control The combination of the Tiger‑tec Silver technology and the WKP25S grade produces consistent chip control, which directly reduces interruptions caused by poor swarf evacuation. Designed for the ISO material groups P (steel) and K (cast iron), this indexable insert handles the typical heat and chip characteristics of both families. Stable chip formation means fewer tool changes and lower machine idle time, delivering measurable gains in process efficiency. For production environments, this translates into a more predictable machining cycle and improved overall equipment effectiveness. Longer service intervals thanks to abrasion resistance Coated on a robust carbide substrate, WKP25S offers high resistance to abrasive wear, especially useful when machining cast iron with its hard inclusions. The coating reduces flank and crater wear, so the cutting edge remains sharper for longer and surface finishes stay within tolerance across longer batches. As a result, tooling costs per part fall and maintenance intervals extend, making the solution economically attractive for medium- to high-volume milling tasks. Easy integration and application clarity The 2R30‑D57 chipbreaker geometry is tuned for controlled swarf and versatile cutting conditions; it suits a range of feed rates and depths of cut typical in face and shoulder milling. The insert sits in standard milling toolholders and readily replaces comparable indexable inserts, simplifying logistics. Cutting data should be selected according to workpiece material and machine rigidity; starting parameters for steel and cast iron are available from Walter Tools documentation and Metav Werkzeuge can advise on optimal feeds and speeds to match machine power and clamping conditions. Discuss the suitability of the Tiger‑tec Silver WKP25S grade with Metav Werkzeuge's specialists or request detailed application guidance via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical Data SKU: P44290-2R30-D57-WKP25S-WALTER Article designation: P44290-2R30-D57 WKP25S Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: 2R30‑D57 Material groups: P / K Facts ISO designation: P44290-2R30-D57 WKP25S Applicable materials: Steel (P), Cast iron (K) Coating technology: Tiger·tec Silver Special features Coated carbide grade WKP25S Optimised for stable chip formation Abrasion-resistant for cast iron Suitable for standard milling toolholders Brand: Walter Tools FAQ What materials is this insert designed for? The P44290-2R30-D57 WKP25S insert is specified for ISO groups P (steel) and K (cast iron), making it suitable for unalloyed and alloyed steels as well as a wide range of cast irons. What advantages does the WKP25S grade provide? WKP25S is a coated carbide grade from Walter Tools that offers enhanced wear resistance and reliable edge stability under typical steel and cast iron cutting conditions, improving tool life and surface consistency. How does the 2R30‑D57 chipbreaker affect machining? The 2R30‑D57 geometry promotes controlled swarf formation and evacuation, which reduces the risk of chip entanglement and supports stable cutting forces during both finishing and semi‑finishing operations. Can this insert be used in existing milling cutters? The insert is compatible with common indexable milling toolholders, but correct seat geometry and clamping torque must be confirmed before mounting to ensure repeatable performance. Is the coating suitable for high cutting speeds? The Tiger‑tec Silver coating enhances thermal and wear resistance, allowing flexible cutting parameters; recommended speeds depend on workpiece material and machine capability. Manufacturer: Walter AG; Headquarters: Tübingen, Germany The Walter AG (brand: Walter Tools), headquartered in Tübingen, is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned solely for explanation; there is no affiliation between our company and the named brands. The offered article is an original, factory‑new product of the manufacturer.
P44290-2R30-D57 WSM35G WSM35G Wendeplatten - Walter Tools
Take advantage of the combination of high wear resistance, secure chip control and broad material coverage for a reliable milling process; order the insert directly via Metav Werkzeuge or contact our consultants for application support. P44290-2R30-D57 WSM35G indexable milling insert by Walter Tools — Tiger·tec Gold coating, for stainless steels and superalloys The P44290-2R30-D57 WSM35G is an indexable milling insert designed for heavy-duty machining of corrosion-resistant steels and heat-resistant superalloys, offering stable cutting edges and reliable chip formation in demanding conditions. Tiger·tec Gold coated grade WSM35G Chipbreaker 2R30-D57 for secure chip control Optimised for stainless steels and superalloys High wear resistance for demanding materials The Tiger·tec Gold coating combined with the WSM35G grade provides improved wear resistance and edge stability when machining difficult materials. Coated carbide ensures a thermal barrier and reduces adhesion at the cutting edge, which in turn prolongs tool life and maintains component tolerances. For production environments where consistent performance matters, this insert supports longer tool cycles and reduced index changes, contributing to lower manufacturing downtime and predictable process windows. Reliable chip control for better surface quality The integrated chipbreaker 2R30-D57 is engineered to produce secure chip formation under high temperature and low thermal conductivity conditions typical of stainless steels and superalloys. Controlled chip shapes reduce the risk of built-up edge and re-cutting, improving surface finish and minimising secondary operations. In practical terms, the geometry helps to keep chips out of the cut and supports repeatable part quality across batch runs. Process efficiency and repeatable results Using a coated grade developed for tough alloys brings measurable benefits in productivity: stable cutting edges mean fewer interruptions for insert changes, and predictable wear behaviour eases process planning. The combination of coating technology and grade selection delivers an economic advantage through longer tool cycles and consistent tolerances, making this insert suitable for component runs where reproducibility and uptime are priorities. Practical application and mounting considerations The insert is suitable for use in indexable milling cutters where robust clamping and correct seat geometry are ensured. The P44290-2R30-D57 design performs best with appropriate cutter bodies and cutting parameters adjusted for stainless steels and heat-resistant superalloys; feed and speed must be matched to material and machine rigidity. For integration into existing tool setups, refer to cutter manufacturer guidance and consider coolant strategy to support chip evacuation and temperature control. Contact Metav Werkzeuge for tailored application advice and procurement of the Walter Tools P44290-2R30-D57 WSM35G insert — our team can confirm suitability for specific workpieces and machining centres Technical Data Article number / SKU: P44290-2R30-D57-WSM35G-WALTER Designation: P44290-2R30-D57 WSM35G Brand: Walter Tools Series: Tiger·tec Gold Grade: WSM35G Chipbreaker: 2R30-D57 Core Data ISO material groups: M, S Material designation: S / M Suitable for: stainless steels, heat-resistant superalloys Special features Coating technology: Tiger·tec Gold Coated carbide grade: WSM35G Application: heavy-duty milling, secure chip formation Focus: stable cutting edge, wear resistance, broad material coverage FAQ What materials is this insert suited for? The P44290-2R30-D57 WSM35G insert is developed for stainless steels (ISO group M) and heat-resistant superalloys/titanium alloys (ISO group S), offering thermal and edge stability for these challenging materials. What does the Tiger·tec Gold coating provide? Tiger·tec Gold coating on the WSM35G grade improves wear resistance and reduces adhesion at the cutting edge, which extends insert life and supports stable machining of demanding alloys. How does the 2R30-D57 chipbreaker affect machining? The 2R30-D57 chipbreaker is designed for controlled chip formation, lowering the risk of built-up edge and improving surface finish when machining materials with poor thermal conductivity. Can this insert be used for general steel machining? This insert is optimised for ISO groups M and S; it is not specified for general unalloyed steels. For steel-specific applications, choose an insert and grade intended for that material group. Which SKU should be quoted when ordering? Please reference SKU P44290-2R30-D57-WSM35G-WALTER when enquiring or ordering to ensure the correct Tiger·tec Gold grade and chipbreaker are supplied. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. The brand name Walter Tools is mentioned for explanatory purposes; there is no affiliation between our company and the trademark owners. The offered item is an original, factory-new product of the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com