RCGT0602M0-MN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of reliable chip control, a versatile round geometry and the cost-efficiency of an uncoated carbide grade for steady turning performance; order the insert directly via Metav Werkzeuge or consult the team for material-specific advice. RCGT0602M0-MN2 WN10 – Walter Tools indexable turning insert, MN2 chipbreaker, 7° clearance The RCGT0602M0-MN2 WN10 is an indexable turning insert designed for general turning operations where consistent chip formation and versatile tool geometry are required. MN2 chipbreaker for controlled chips Uncoated carbide WN10 for broad use Round shape for versatile turning radii Better machining through controlled chips The insert delivers consistent chip control thanks to the MN2 chipbreaker, which promotes predictable fragmenting and evacuation. This reduces interruptions for chip clearing and helps maintain cycle times on batch and single-part production. The uncoated carbide grade provides robust cutting performance for a wide range of tasks where coated grades are not required; the uncoated substrate offers stable cutting-edge behaviour and straightforward post-process handling. In practice, the chipbreaker geometry converts cutting forces into repeatable chip shapes, simplifying disposal and reducing toolholder fouling. Flexible geometry for adaptable turning strategies The round geometry combined with a 7° clearance gives access to a variety of turning profiles and allows safe entry angles for profiling and light roughing. With an insert size of 06 and a plate thickness of 02, the component is compatible with toolholders that accept the RCGT0602 form and enables small-radius contouring without sacrificing stability. The tolerance class G supports reliable seating and exchangeability in indexed tool systems. For precise material suitability, the product matrix should be consulted to verify workpiece compatibility before selecting cutting parameters. Practical stock and process considerations for production Supply-side clarity is assisted by the open-series designation Walter Schneidstoffsorte - Serie offen, which describes the uncoated carbide family used here. The execution marked as T and the compact round format make inventory management straightforward for workshops needing a small, versatile insert across multiple machines. Where machining programmes must be optimised, the insert’s features help reduce tool-change frequency and support predictable wear behaviour, contributing to lower process variability and improved overall equipment effectiveness. For bespoke process tuning, Metav Werkzeuge can advise on speeds and feeds for the intended application. For ordering, material queries or technical matching regarding Walter Tools grade WN10 inserts, please contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: RCGT0602M0-MN2-WN10-WALTER Designation: RCGT0602M0-MN2 WN10 Product type: Indexable turning insert Manufacturer: Walter Tools Facts Clearance angle: 7° Insert size: 06 Thickness: 02 Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Shape: Round Series: Walter Schneidstoffsorte - Serie offen Execution: T FAQ What does the MN2 chipbreaker do? The MN2 chipbreaker shapes and fractures chips to improve evacuation; the MN2 design on the RCGT0602M0-MN2 WN10 insert is aimed at predictable chip control during continuous turning. Is the WN10 grade coated? No, WN10 is an uncoated carbide grade; this provides stable cutting behaviour where coating benefits are not essential and simplifies post-process handling. Which toolholders fit this insert? Holders that accept RCGT0602-style round inserts and secure thin plates (thickness 02) are suitable; the round form allows use in toolholders designed for radiused cutting edges. What does tolerance class G indicate? Tolerance class G denotes a manufacturing tolerance band that ensures consistent seating and interchangeability across a production run, supporting reliable indexing and repeatable positioning. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanation. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer Walter Tools.
RCGT0602M0-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a WNN10 coated carbide grade, the MN2 chipbreaker and a round geometry with a 7° clearance to achieve stable chip control and predictable tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application matching. RCGT0602M0-MN2 WNN10 turning indexable insert — round geometry, 7° clearance (Walter Tools) The RCGT0602M0-MN2 WNN10 is a coated carbide turning indexable insert engineered for reliable chip formation and consistent performance in a wide range of general turning operations High-performance WNN10 coated carbide MN2 chipbreaker for stable chips Round geometry, 7° clearance angle Size 06, thickness 02 for precise profiling Improved process stability through optimised chip control The combination of the WNN10 coated carbide grade and the MN2 chipbreaker provides focused advantages for machining: a coating that enhances edge endurance and a chipbreaker geometry that produces compact, controllable chips. This results in fewer interruptions at the toolholder, reduced risk of built-up edge and a steadier cutting force curve, which directly supports higher machine uptime and repeatable part quality. The term “chipbreaker” refers to the insert topography that promotes predictable chip segmentation for safer evacuation. Geometry tuned for versatile turning and form work A round geometry with a 7° clearance angle offers a robust cutting edge for interrupted cuts and profile turning while delivering good radial strength. The insert’s size 06 and thickness 02 classification make it suitable for fine form work where repeatability and edge stability matter. The modest clearance angle helps maintain contact stability under load; the round form spreads cutting forces over a larger edge radius, reducing the risk of edge chipping during heavy engagement. For material-specific recommendations, consult the product matrix to match cutting data and coatings. Clear identification and easy integration into production Marked as part of the Walter Schneidstoffsorte — open series and specified under tolerance class G, this insert simplifies inventory and tool planning. The designation facilitates quick recognition of the coated carbide nature and intended function at the tool station. Where the base material is listed as catalogue-dependent, application selection should follow the supplier’s matrix; collaborating with Metav Werkzeuge ensures the correct grade and geometry are chosen for the intended machining task. Consistent identification supports batch-to-batch repeatability in serial production. Contact Metav Werkzeuge today to verify the suitability of the Walter Tools RCGT0602M0-MN2 WNN10 insert for the intended application and to check current availability Technical Data SKU: RCGT0602M0-MN2-WNN10-WALTER Article designation: RCGT0602M0-MN2 WNN10 Product type: Turning indexable insert Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WNN10 Chipbreaker: MN2 Geometry: Round Free angle: 7° Plate size: 06 Plate thickness: 02 Tolerance class: G Material: Katalogabhängig Facts Free angle: 7° Plate size: 06 Plate thickness: 02 Tolerance class: G Special features Coated carbide grade MN2 chipbreaker for controlled chip formation Robust round insert for interrupted and profiling cuts Series and grade identification for easy inventory management Material suitability: check product matrix FAQ Which machining applications suit this insert best? The RCGT0602M0-MN2 WNN10 insert is designed for general turning and profiling tasks where a round geometry and reliable chip control are required; check the Walter Tools application matrix for material-specific cutting data. What does the MN2 chipbreaker do? The MN2 chipbreaker on the insert promotes compact, predictable chip formation, improving evacuation and reducing the likelihood of chip entanglement during continuous turning. Is the cutting material a coated carbide? Yes, the WNN10 designation refers to a coated carbide grade as specified in the Walter Schneidstoffsorte series, offering enhanced edge life under appropriate cutting conditions. How is the insert identified within an inventory system? Identification is via the article designation RCGT0602M0-MN2 WNN10 and the SKU RCGT0602M0-MN2-WNN10-WALTER, which includes the geometry, chipbreaker and grade for straightforward stock control. What tolerance and class information is relevant for ordering? This item is specified with tolerance class G, which should be considered when matching inserts to holders and when high repeatability is required. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Mark names and registered trademarks are mentioned solely for explanation and identification of compatibility. There is no affiliation between Metav Werkzeuge and the named manufacturers; the offered article is an original, factory-new product of the respective manufacturer.
RCGT0803M0-MN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of stable chip control, cost-efficient uncoated carbide and compact geometry for consistent turning performance; order the RCGT0803M0-MN2 WN10 directly via Metav Werkzeuge or consult our specialists for application advice. RCGT0803M0-MN2 WN10 — Round turning insert, MN2 chipbreaker, 7° clearance (Walter Tools) The RCGT0803M0-MN2 WN10 is a round indexable turning insert engineered for reliable chip control and predictable tool life in general turning tasks. MN2 chipbreaker for controlled chip formation 7° clearance angle for robust cutting geometry Round insert, size 08 and thickness 03 Tolerance class G for consistent fit Productivity gains from a robust, uncoated carbide grade The insert is supplied in the WN10 grade, an uncoated carbide variety designed for broad applicability. This material choice supports stable chip formation and a predictable wear pattern, which reduces unexpected downtime and increases throughput. In practical terms, fewer insert changes and consistent cutting behaviour translate into measurable productivity advantages on repetitive turning operations, especially when paired with stable clamping and correct cutting data. Geometry that protects the edge and improves surface finish The combination of the MN2 chipbreaker and the 7° clearance creates a balanced cutting geometry: the chipformer directs chips away from the cutting zone while the clearance reduces rubbing behind the edge. This results in improved surface quality and reduced built-up edge tendencies. For customers handling variable feed rates, the geometry offers a compromise between chip control and edge strength that is suitable for a wide range of medium finishing and profiling tasks. Compact format and repeatable positioning for tool systems Delivered as a round insert in size 08 with thickness 03, the component matches common round-holder systems and provides straightforward indexability. The tolerance class G ensures consistent seat fit and repeatable tool setting, which simplifies tool change procedures and minimises setup variation. Material information is catalogue-dependent; confirm the specific substrate in the product matrix for exact holder and application matching. Application guidance and selection advice for reliable results The insert’s open series designation emphasises a general-purpose approach—verify the full product matrix to confirm suitability for the workpiece material. When machining mixed batches or unknown alloys, favour conservative cutting parameters initially and monitor chip form; the insert’s design supports controlled chips and predictable wear progression. For tailored recommendations based on machining strategy, spindle speed and feed, Metav Werkzeuge can provide application-focused advice and selection support. For tailored tooling recommendations or to secure Walter Tools RCGT0803M0-MN2 WN10 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: RCGT0803M0-MN2-WN10-WALTER Designation: RCGT0803M0-MN2 WN10 Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Material: Katalogabhängig Core measurements Free angle: 7° Plate size: 08 Plate thickness: 03 Tolerance class: G Features & compatibility Shape: Round Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Execution: T Base designation: RCGT0803M0-MN2 FAQ Which materials is this insert suited for? The RCGT0803M0-MN2 WN10 is supplied in an uncoated carbide grade; users should consult the product matrix to confirm suitability for specific materials and machining conditions. What benefit does the MN2 chipbreaker offer? The MN2 chipbreaker promotes controlled chip formation, reducing the risk of long, tangled chips and helping to maintain a stable cutting process and consistent surface quality. How does a 7° clearance angle affect performance? A 7° clearance reduces flank contact behind the cutting edge, lowering friction and heat build-up while maintaining sufficient edge support for medium-duty turning operations. How are size and thickness encoded in the designation? In this insert family, the code reflects geometry: size 08 indicates the insert diameter class and 03 denotes the plate thickness; these dimensions determine holder compatibility and indexability. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, brand-new goods from the manufacturer.
RCGT0803M0-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of coated cemented carbide and a controlled MN2 chipbreaker for reliable chip formation and consistent finishing results; order or request advice via Metav Werkzeuge for availability and application support. RCGT0803M0-MN2 WNN10 indexable insert (round, 7° clearance) – Walter Tools A RCGT0803M0-MN2 WNN10 indexable turning insert designed for precision external turning and finishing applications in industrial machining. Walter WNN10 coated cemented carbide Round insert form for stable engagement MN2 chipbreaker for controlled chip formation 7° clearance for precise finishing Reliable wear resistance for consistent productivity The coated WNN10 grade is a coated cemented carbide designed to deliver stable wear behaviour and predictable component quality in serial production. The insert combines a robust coating with the base carbide to enhance tool life under moderate to demanding cutting conditions; this reduces downtime for tool changes and supports steady productivity. For customers evaluating process economics, the reliable wear pattern enables a clearer replacement interval and easier planning of tool inventories. Material suitability should be verified against the supplier’s product matrix to match the grade to the workpiece alloy and machining parameters. Geometry and chip control that improve surface finish The round insert geometry together with the MN2 chipbreaker ensures controlled chip formation and safe evacuation in turning operations. The design, paired with a 7° clearance, supports close tolerances and a consistent surface finish on external profiles. The insert’s code-based dimensions (size code 08, thickness code 03) provide a compact cutting edge for finishing passes while maintaining sufficient edge strength. For operators accustomed to metric tool codes, these identifiers make it straightforward to select matching toolholders and set up machines for minimal vibration and accurate cutting engagement. Process security and practical application guidance Supplied as part of the Walter open-series carbide range, this insert focuses on process security and repeatable results across batches. The series description highlights coated cemented carbide technology; however, the final choice of grade and cutting data should be confirmed against the workpiece material. Where uncertainty exists about compatibility or cutting parameters, it is recommended to consult the manufacturer’s product matrix or technical documentation. For production teams seeking to integrate the insert into an existing tool system, the round form and MN2 chip control simplify orientation and reduce the need for additional orientation adapters. For reliable finishing with Walter Tools inserts, contact Metav Werkzeuge for tailored application advice and current availability — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data Article number: RCGT0803M0-MN2-WNN10-WALTER Label: Drehwendeschneidplatte RCGT0803M0-MN2 WNN10 Walter Tools Product type: Drehwendeschneidplatte Brand: Walter Tools ISO designation: RCGT0803M0-MN2 WNN10 Facts Clearance angle: 7° Insert size code: 08 Thickness code: 03 Tolerance class: G Special features Coating / grade: WNN10 (coated cemented carbide) Chipbreaker: MN2 Form: Round Series: Walter Schneidstoffsorte - Serie offen Material availability: Katalogabhängig FAQ What materials is this insert suitable for? Material suitability for the RCGT0803M0-MN2 WNN10 insert depends on the workpiece; the grade WNN10 is a coated cemented carbide and its suitability should be checked against the manufacturer’s product matrix before selection. What benefit does the MN2 chipbreaker provide? The MN2 chipbreaker promotes controlled chip formation and reliable evacuation, improving both surface finish and process safety during external turning. How does the round form affect machining? The round insert form increases edge strength and delivers stable engagement, which helps maintain consistent cutting conditions and reduces the risk of vibration in finishing cuts. What does the 7° clearance mean in practice? A 7° clearance reduces rubbing on the flank face, enabling more accurate finishing passes and contributing to a better surface quality on the machined component. Which identifiers help with toolholder selection? The ISO designation and the size/thickness codes (size code 08, thickness code 03) support straightforward matching to compatible toolholders and clamping systems. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are used for explanation only. The offered item is original, factory-new merchandise from the manufacturer. Ersetzungen (Hinweis): "Stainless Steel" → "rostfreier Stahl", "Steel" → "Stahl", "Brass" → "Messing", "Wood and Plastic" → "Holz und Plastik", "Stainless" → "rostfrei"
RCGT10T3M0-MN2 WN10 Wendeplatten - Walter Tools
Combining precise chip control and robust uncoated carbide construction, this insert delivers consistent turning cycles with reduced machining interruptions. Benefit from the MN2 chipbreaker and the compact 7° relief for reliable performance; order directly via Metav Werkzeuge or consult our specialists for optimal tool selection. RCGT10T3M0-MN2 WN10 — Round indexable turning insert, MN2 chipbreaker | Walter Tools The RCGT10T3M0-MN2 WN10 is an uncoated carbide round indexable turning insert designed for general turning and profiling operations where predictable chip formation is required. Uncoated carbide grade WN10 MN2 chipbreaker for reliable chips Round insert, size 10 mm 3 mm thickness with 7° relief Greater process stability through controlled chip formation The combination of an uncoated carbide substrate and the engineered MN2 chipbreaker produces a stable, repeatable chip flow that reduces the likelihood of interruptions and rework. This geometry supports steady cutting conditions even on varied component geometries, which helps to maintain cycle times and minimise tool-related downtime. The focus on reliable chip control translates directly into fewer operator interventions and a smoother production rhythm. Compact geometry for access and predictable cutting behaviour The round geometry and compact profile provide superior approachability for radiused contours and internal profiling. With a 3 mm thickness, 10 mm size and a 7° relief angle, the insert reduces cutting edge interference while maintaining rigidity. The ISO designation RCGT10T3M0-MN2 WN10 identifies the insert form and seat, simplifying selection of matching toolholders and clamping systems. This balance of clearance and stiffness aids in achieving consistent surface finishes and dimensional stability. Practical selection and application guidance for production use Selection of the correct grade and chipbreaker should follow the product-specific application matrix to ensure suitability for the intended materials and cutting parameters. The WN10 grade is supplied as uncoated carbide and is intended for applications where an uncoated substrate is appropriate; verify the machining matrix for specific workpiece materials and cutting data. For assistance with tooling layouts, compatible holders or batch requirements, Metav Werkzeuge offers technical consultation and practical advice tailored to production needs. For application support or to arrange supply of Walter Tools WN10 inserts, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert guidance and ordering assistance Technical Data Article number: RCGT10T3M0-MN2-WN10-WALTER Designation: Drehwendeschneidplatte RCGT10T3M0-MN2 WN10 Manufacturer: Walter Tools Facts Relief angle: 7° Insert size: 10 mm Thickness: 3 mm Tolerance class: G Special features Chipbreaker: MN2 Grade: WN10 (uncoated carbide) Geometry: Round ISO designation: RCGT10T3M0-MN2 WN10 Series: Walter Schneidstoffsorte - Serie offen Material: catalogue dependent FAQ Which materials is this insert suitable for? Workpiece suitability depends on the machining matrix; the insert grade WN10 is an uncoated carbide option and should be matched to the specific material and cutting data in the product matrix. Is the insert coated? The insert is supplied as an uncoated carbide grade WN10; the chip form is managed by the built-in MN2 breaker. Which toolholder fits this insert? Compatibility is determined by the ISO designation RCGT10T3M0-MN2; holders designed for RCGT round negative inserts and the corresponding seat will accept this insert. How does the MN2 chipbreaker affect machining? The MN2 breaker promotes controlled chip segmentation and evacuation, reducing the risk of long, entangling chips and supporting stable cutting forces for predictable tool life. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking. Protected trademarks and trade names remain the property of their respective owners and are mentioned solely for explanatory purposes. There is no affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the stated manufacturer.
RCGT10T3M0-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the WNN10 coated-carbide specification together with the MN2 chipbreaker and round geometry to achieve consistent chip control and reliable tool life; order via Metav Werkzeuge or consult the technical team for detailed suitability information. RCGT10T3M0-MN2 WNN10 turning insert — round form, MN2 chipbreaker, WNN10 grade (Walter Tools) The RCGT10T3M0-MN2 WNN10 is a round turning insert designed for general turning applications where a balanced cutting geometry and defined chip control are required. Coated carbide grade WNN10 MN2 chipbreaker for predictable chip control Round shape RCGT10 for versatile turning 7° clearance with T3 thickness Improved process reliability through grade and chip management The combination of the WNN10 coated-carbide grade and the MN2 chipbreaker is engineered to support consistent cutting performance. The coating reduces flank wear and enhances edge stability under a range of conditions, while the chipbreaker promotes controlled chip formation, lowering the risk of interruption and rework. This focus on measurable process benefits is intended to increase uptime and repeatability in production environments. Flexible geometry for a wide range of turning tasks The round geometry and the specified 7° clearance angle deliver versatility for mixed turning operations. The compact T3 thickness offers stable clamping and is suitable for applications where a compact insert profile is advantageous. Because the design emphasises adaptability, the insert can be deployed in various tool holders and set-ups, enabling a streamlined tooling inventory while maintaining machining performance. Practical guidance for application and material selection The insert is a coated carbide type; material suitability should be verified against the product matrix before application. For many standard turning tasks, the coated-carbide composition brings improved wear resistance and surface quality. The MN2 chip control is particularly effective where predictable chip segmentation supports safer swarf removal and consistent surface finish. When in doubt, refer to the technical matrix or seek brief application advice to align cutting parameters with the chosen workpiece material. Quality markers and handling considerations Manufactured to a tolerance class G, the insert meets defined dimensional expectations for reliable interchangeability. The ISO designation is RCGT10T3M0-MN2 WNN10, and the series is listed under Walter’s open series of grades. Proper handling, insertion and torque settings are essential to exploit the design benefits; once correctly mounted, the insert supports stable performance and repeatable results across batches. For availability and tailored technical advice on Walter Tools turning inserts such as the RCGT10T3M0-MN2 WNN10, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical data Article number: RCGT10T3M0-MN2-WNN10-WALTER Product type: Turning insert Facts Size: 10 Thickness: T3 Clearance angle: 7° Tolerance class: G Special features Coated carbide grade WNN10 Chipbreaker MN2 Round plate form Series: Walter Schneidstoffsorte - Serie offen ISO designation: RCGT10T3M0-MN2 WNN10 Material: Katalogabhängig FAQ What materials is this insert suitable for? The RCGT10T3M0-MN2 WNN10 is a coated-carbide insert; suitability for specific workpiece materials should be checked in the product matrix provided by Walter Tools. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on the insert promotes predictable chip formation and improved swarf control, which supports consistent surface finish and safer removal in turning operations. What does the T3 designation mean for the insert? T3 indicates the insert thickness profile; the compact thickness contributes to stable clamping and is compatible with holders designed for this profile. Is the insert interchangeable with other round RCGT inserts? The ISO designation RCGT10T3M0-MN2 WNN10 specifies the geometry and grade; interchangeability depends on the holder, clamping method and required clearance, which should be confirmed before replacement. Where can detailed cutting data be obtained? Cutting data and material-specific recommendations are available in the Walter Tools documentation and the product matrix; consult these resources to align speeds and feeds with the WNN10 grade. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only and do not indicate any affiliation with or endorsement by the trademark owners. The offered item is an original, brand-new product from the manufacturer.
RCGT120400-MN2 WNN10 WNN10 Wendeplatten - Walter Tools
Combining the WNN10 coated carbide grade with an MN2 chipbreaker and a compact 7° relief angle delivers predictable cutting and controlled chip formation for stable turning operations. Order the insert directly via Metav Werkzeuge or consult our application specialists for machining advice. RCGT120400-MN2 WNN10 turning indexable insert, 7° relief — Walter Tools The RCGT120400-MN2 WNN10 is a round turning insert engineered for precision external turning and consistent chip control in production environments. Coated carbide grade WNN10 7° relief angle for stable cutting Round insert RCGT120400-MN2 MN2 chipbreaker for controlled chips Reliable chip control for predictable cycle times The insert is designed around a purposeful MN2 chipbreaker combined with a coated carbide grade, which together promote stable chip formation and reduce unexpected interruptions. This configuration supports repeatable machining by managing chip flow and minimising rework. The modest 7° relief angle lowers cutting forces during engagement, which helps to protect the tool edge and maintain consistent dimensional results when used within its application matrix. Consistent part quality with simple geometry A round insert with a zero nose radius and a compact size simplifies set-up and contributes to uniform surface finish on turned external profiles. The geometry suits operations where small radii and contouring are frequent, while the insert’s construction supports steady cutting performance across batch runs. Operators should consult the supplied product matrix to confirm material suitability and cutting parameters before first use to achieve the best balance between tool life and workpiece quality. Process reliability and integration into existing toolholders The insert follows ISO designation standards and integrates easily into standard turning toolholders, enabling quick changeover and predictable tool behaviour in production cells. The use of a recognised Walter Tools grade from an open series offers wide availability and consistent manufacturing tolerances, supporting efficient stock rotation in toolrooms. For applications requiring traceable performance, the coated carbide composition and chipbreaker design provide measurable improvements in machining stability. For tailored advice on employing Walter Tools’ WNN10 grade in production, contact Metav Werkzeuge for application recommendations and order support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: RCGT120400-MN2-WNN10-WALTER Article designation: RCGT120400-MN2 WNN10 Product type: Turning indexable insert Brand: Walter Tools Execution: T Facts Relief angle: 7° Size: 12 Thickness: 04 Nose radius: 0 Tolerance class: G Special features Coating: coated carbide (WNN10) Chipbreaker: MN2 Shape: round Series: Walter Schneidstoffsorte - Serie offen ISO designation: RCGT120400-MN2 WNN10 FAQ What materials is this insert suitable for? The insert is specified with the WNN10 coated carbide grade; please check the product’s material compatibility matrix to confirm suitability for specific materials. Which chip control behaviour can be expected from this geometry? The MN2 chipbreaker is intended to produce controlled, short-to-medium chips that enhance process stability in external turning. How does the 7° relief angle affect cutting performance? A 7° relief angle reduces radial cutting forces and helps maintain edge stability, especially during continuous turning operations. Can this insert be used in standard toolholders? Yes, the ISO designation and round form permit integration into standard turning toolholders that accept the RCGT family. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned only for explanatory purposes. There is no affiliation between our company and the named brands. The offered article is original, factory-new goods from the manufacturer.
RCGT1204M0-MN2 WN10 Wendeplatten - Walter Tools
Take advantage of the combination of consistent edge performance, clear specification and simple inventory labelling for dependable turning operations — order via Metav Werkzeuge or request application guidance from the consultants. RCGT1204M0-MN2 WN10 – indexable turning insert with MN2 chipbreaker (Walter Tools) The RCGT1204M0-MN2 WN10 is a round indexable insert designed for precision turning tasks, offering a stable cutting edge and predictable chip formation for industrial metalcutting operations. Uncoated carbide grade WN10 Round insert, size 12 MN2 chipbreaker for consistent chip control 7° clearance angle, tolerance class G Consistent edge life for predictable productivity The round indexable insert delivers stable wear behaviour thanks to the uncoated WN10 cemented carbide grade, which is optimised for general turning tasks where predictable performance matters. The coded thickness and form provide easy replacement and repeatability on compatible toolholders, reducing downtime caused by regrinding or unexpected insert failure. This focus on constancy supports tighter process windows and more reliable batch throughput. Controlled chip formation that aids process security Equipped with the MN2 chipbreaker, the insert is aimed at producing compact, manageable chips under a wide range of cutting parameters. Controlled chip flow reduces the risk of entanglement and improves surface finish consistency, which in turn supports downstream operations such as heat treatment or coating. The chipbreaker geometry also simplifies swarf handling in high-volume environments, contributing to safer and cleaner machining conditions. Clear specifications for fast machine set-up Key specifications are marked and easy to interpret: the circular form and size 12 designation make tool selection straightforward, while the 7° clearance angle and tolerance class G enable precise matching to turning centres and turrets. This clarity in specification shortens set-up time and simplifies inventory management, facilitating faster changeovers and fewer tool mismatches on the shop floor. Material suitability and application guidance The insert is supplied in an uncoated cemented carbide version defined as WN10; suitability for specific workpiece materials should be verified against the manufacturer's product matrix before selection. Where process security and surface quality are critical, matching the insert grade and chipbreaker to the workpiece and cutting conditions is recommended to achieve the intended results without trial-and-error. Handling, indexing and toolholder compatibility The circular geometry with code RCGT1204M0-MN2 allows multi-index usage where permitted by the toolholder design. Correct clamping and orientation are essential to achieve the specified tolerance behaviour and repeatable performance. The insert's form and codes support efficient stock rotation and traceability in production systems, improving quality control and part conformity. Practical benefits for production planning By standardising on clearly coded inserts with defined chip control and tolerance class, production planners gain improved predictability for tool life and maintenance intervals. The product’s open series designation from the manufacturer provides flexibility in tooling strategies while preserving the option to consult manufacturer tables for optimal cutting data and recommended feeds and speeds. For technical advice on integrating the Walter Tools RCGT1204M0-MN2 WN10 into a process, and for availability and ordering through Metav Werkzeuge, please contact Metav Werkzeuge’s technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number / SKU: RCGT1204M0-MN2-WN10-WALTER Type: Indexable turning insert Designation: RCGT1204M0-MN2 WN10 Series: Walter Schneidstoffsorte - Serie offen Manufacturer: Walter Tools Facts Size: 12 Thickness (code): 04 Clearance angle: 7° Tolerance class: G Special features Grade: WN10 (uncoated cemented carbide) Chipbreaker: MN2 Insert form: Round Execution code: T Material designation: Katalogabhängig Notes: Verify workpiece suitability with the product matrix FAQ What materials is this insert suitable for? Material suitability must be verified using the manufacturer's product matrix; the WN10 grade is an uncoated cemented carbide intended for general turning, and exact recommendations depend on the workpiece material and cut conditions. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker is designed for consistent chip control, producing compact chips that improve handling and surface finish when the correct feeds and speeds are applied to the indexable turning insert. What does the designation RCGT1204M0-MN2 indicate? The designation identifies the insert geometry, thickness code and chipbreaker type; it helps ensure correct toolholder compatibility and repeatable indexing during tool changes. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision cutting tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names belong to their respective owners and are mentioned for explanatory purposes only. There is no affiliation between Metav Werkzeuge and the mentioned brands; the offered article is original factory-new product of the manufacturer.
RCGT1204M0-MN2 WNN10 Wendeplatten - Walter Tools
Take advantage of the combination of a coated carbide WNN10 grade and the MN2 chipbreaker to achieve consistent chip control and long tool life; order directly via Metav Werkzeuge or consult the team for application-specific advice. RCGT1204M0-MN2 WNN10 Turning Insert — MN2 chipbreaker, round 12 mm | Walter Tools The RCGT1204M0-MN2 WNN10 is a round indexable turning insert designed for versatile external turning tasks, offering a 7° clearance angle and a robust MN2 chipbreaker for controlled material removal. Coated carbide grade WNN10 for reliable wear resistance MN2 chipbreaker for predictable chip control Round 12 mm format for versatile turning operations 7° clearance angle for stable cutting performance Stable performance through a proven carbide grade The combination of the WNN10 coated carbide grade and the insert geometry provides a balance between wear resistance and edge strength, which supports stable production cycles. This indexable plate is intended for machining tasks where a consistent cutting edge and repeatable results are required. The coated substrate reduces abrasive wear, while the overall design helps to maintain a predictable tool life under standard turning conditions. For precise material and application mapping, verify suitability with the specified product matrix. Predictable chip control and geometry benefits The MN2 chipbreaker explains the insert’s chip control characteristics: it is engineered to shape chips reliably and reduce interruptions from uncontrolled swarf. The round 12 mm format allows close approach to radiused profiles and provides flexibility in turning operations where varied radii are encountered. The 7° clearance angle reduces rubbing at the flank, supporting lower cutting forces and a steadier surface finish when set up correctly in the toolholder. Practical handling and process advantages With the plate’s designation and tolerance class (G), the insert fits common clamping systems for quick indexing and minimal setup time. The thickness code (04) corresponds to the format range used in compact toolholders, enabling stable seating and repeatable positioning. These attributes contribute to shorter downtime during insert changes and predictable replacement intervals, which supports efficient workshop workflows and production planning. Specification guidance and application planning This indexable insert belongs to the Walter open grade series and is supplied as a coated carbide type; specific workpiece material suitability should be determined from the product matrix. Where hard data on cutting parameters is needed, consult the tooling recommendations to match feed and speed to the WNN10 grade and the MN2 chipbreaker. For users seeking process reliability, combining this insert with an appropriate toolholder and coolant strategy will help to extend tool life and achieve consistent surface quality. Contact Metav Werkzeuge for application advice or to request the matching tooling recommendations for this Walter Tools turning insert — Metav Werkzeuge is ready to support ordering and technical queries via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: RCGT1204M0-MN2-WNN10-WALTER Designation: RCGT1204M0-MN2 WNN10 Product type: Turning insert (indexable) Facts Diameter / format: 12 mm Thickness code: 04 Free angle: 7° Tolerance class: G Special features Grade: WNN10 (coated carbide) Chipbreaker: MN2 Plate form: Round Series: Walter Schneidstoffsorte - Serie offen Execution: T Indexable insert type: RCGT1204M0-MN2 FAQ What materials is this insert suitable for? Suitability must be checked in the product matrix; the RCGT1204M0-MN2 WNN10 is a coated carbide grade and workpiece compatibility depends on the specific application matrix. How does the MN2 chipbreaker affect machining? The MN2 chipbreaker on this Walter Tools insert promotes predictable chip formation and easier chip evacuation, reducing interruptions during turning operations. Can this insert be used for finishing and profiling? The round format and 7° clearance support fine profiling and finishing when the appropriate feeds and speeds are selected for the WNN10 grade. What does the thickness code 04 indicate? The code denotes the insert’s thickness series and helps to select compatible toolholders; check the holder specifications against the RCGT1204M0-MN2 designation. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. The mention of brand names such as Walter Tools is for explanation only and does not imply any affiliation between our company and the named manufacturers. The offered item is an original, factory-new product of the manufacturer.
RCGX060600E WIS30 WIS30 Wendeplatten - Walter Tools
RCGX060600E WIS30 Drehwendeschneidplatte von Walter Tools Die RCGX060600E WIS30 Drehwendeschneidplatte bietet eine auf Hochgeschwindigkeitsbearbeitung ausgelegte SiAlON-Schneidkeramik für produktive Zerspanung im metallverarbeitenden Betrieb. SiAlON-Schneidkeramik für hohe Schnittgeschwindigkeit Freiwinkel 7° für stabile Spanbildung Rundform 06 mit Plattendicke 06 Toleranzklasse G für reproduzierbare Einsetzbarkeit Hohe Schnittgeschwindigkeit steigert Durchsatz Die SiAlON-Schneidkeramik wurde speziell für hohe Schnittgeschwindigkeiten und temperaturbeständige Einsätze entwickelt. Das Material ermöglicht kürzere Bearbeitungszeiten und damit eine gesteigerte Produktivität bei Serienfertigung. Für Anwender bedeutet das geringere Stückkosten durch schnellere Taktzeiten, vorausgesetzt die Schnittbedingungen und Werkstoffgruppe sind mit der vorhandenen Maschinenkonfiguration abgestimmt. Geometrie sorgt für Prozessstabilität und Oberflächengüte Der geringe Freiwinkel 7° in Kombination mit der Rundform und dem Eckenradius 0 sorgt für eine definierte Spanbildung und konstante Schneidkantenkontur. Diese Merkmalskombination unterstützt eine gleichbleibende Oberflächengüte und reduzierte Vibrationen bei Hochgeschwindigkeitsdrehungen. Die Eigenschaften machen das Werkzeug besonders geeignet für anspruchsvolle Finish-Operationen auf CNC‑Drehmaschinen. Werkstoffeignung und Anwendungshinweis Die Schneidstoffsorte WIS30 steht für eine SiAlON-Schneidkeramik, die sich bei temperaturbelasteten Bearbeitungen bewährt. Die konkrete Eignung richtet sich nach der ISO‑Werkstoffgruppe; daher ist vor dem Einsatz die Produktauswahl anhand der Hersteller-Materialmatrix zu prüfen. Für Anwender ohne tiefgehende Werkstoffkenntnis: SiAlON ist geeignet, wenn hohe Temperaturfestigkeit und Verschleißresistenz gefragt sind. Für wen sich die Platte lohnt Das Bauteil ist ausgelegt für Produktionsbetriebe und Lohnfertiger, die hohe Spanvolumina bei stabiler Qualität erreichen wollen. Besonders profitabel ist die Anwendung in Serien, wo kurze Zykluszeiten und konstante Wiederholgenauigkeit den Gesamtdurchsatz erhöhen. Die Kombination aus Schneidstoff und Geometrie reduziert Stillstand durch weniger Werkzeugwechsel. Empfehlung: Für produktive Hochgeschwindigkeitsbearbeitung die WIS30‑Ausführung von Walter Tools wählen und bei Fragen Kontakt aufnehmen über info@metav-werkzeuge.com oder Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: RCGX060600E-WIS30-WALTER Marke: Walter Tools Serie: Walter Schneidstoffsorte - Serie offen Produktbezeichnung: RCGX060600E WIS30 Fakten Freiwinkel: 7° Eckenradius: 0 Plattengröße: 06 Plattendicke: 06 Besonderheiten Schneidstoffsorte: WIS30 — SiAlON-Schneidkeramik, hohe Schnittgeschwindigkeit, temperaturbeständig Plattenform: Rund Ausführung: X Toleranzklasse: G Sorteneinsatz: Werkstoffeignung anhand Produktmatrix prüfen FAQ Was zeichnet die Schneidstoffsorte WIS30 aus? WIS30 ist eine SiAlON‑Schneidkeramik mit hoher Temperaturbeständigkeit und ausgelegt für hohe Schnittgeschwindigkeiten; für konkrete Werkstoffe sollte die Walter Tools Produktmatrix konsultiert werden. Für welche Maschinen ist die Platte geeignet? Die RCGX060600E WIS30 Drehwendeschneidplatte eignet sich für CNC‑Drehmaschinen, die Betriebsparameter für Hochgeschwindigkeitsbearbeitung stabil einhalten können. Welchen Vorteil bringt der Freiwinkel 7°? Der Freiwinkel 7° unterstützt eine kontrollierte Spanbildung und reduziert Schnittkräfte, was zu verbesserter Oberflächengüte und längeren Standzeiten führen kann. Ist die Platte für rostfreien Stahl geeignet? Die Eignung hängt von der spezifischen ISO‑Werkstoffgruppe ab; WIS30 bietet gute Chancen bei temperaturbeanspruchten Prozessen, eine Prüfung anhand der Herstellermatrix wird empfohlen. Wie beeinflusst der Eckenradius 0 die Bearbeitung? Ein Eckenradius 0 liefert eine scharfe Schneidkante für feine Schnitte und präzise Konturen, ist jedoch bei hohen Belastungen auf die Schneidkantenstabilität zu achten. Hersteller: Walter Tools Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik‑Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
RCGX060600T01020 WIS10 WIS10 Wendeplatten - Walter Tools
Take advantage of the SiAlON ceramic grade WIS10 and the round 06 geometry with a 7° clearance to boost productivity in high‑speed turning operations; for specific material suitability consult the product matrix or contact Metav Werkzeuge for tailored advice. RCGX060600T01020 WIS10 — Round indexable turning insert, SiAlON ceramic, Walter Tools The RCGX060600T01020 WIS10 is a round indexable turning insert designed for high‑speed and temperature‑resistant turning tasks in challenging machining environments. SiAlON ceramic grade WIS10 7° clearance angle for defined cutting geometry Round insert, size 06, thickness 06 Increased productivity through high‑speed capability The core strength of this insert lies in the SiAlON cutting ceramic grade, developed for high cutting speeds and pronounced temperature resistance. These material properties enable shorter cycle times when matched with suitable cutting parameters, which directly improves throughput. The ceramic chemistry delivers thermal stability and wear resistance compared with conventional carbide grades, making the insert a pragmatic choice where speed and heat tolerance define the operation. Check the ISO material grouping to confirm optimal application. Stable cutting performance from round geometry The round insert geometry provides a uniform cutting edge contour that supports balanced engagement and multiple indexable edges. The specified size 06 and thickness 06 result in a compact profile that integrates easily into standard turning toolholders while offering consistent edge life. The indicated corner radius of 0 allows for precise profile generation and narrow groove work where a defined tool tip is required. This geometry suits applications that prioritise repeatable shape control and steady chip formation. Predictable tool behaviour with defined clearance and tolerances A relief of 7° ensures a reproducible clearance behind the cutting edge, reducing rubbing and improving surface finish under stable conditions. The listed tolerance class G provides a baseline for dimensional consistency and reliable seating in compatible toolblocks. Together these factors support predictable tool behaviour, which is crucial for process planning and quality assurance. For interrupted cuts or unstable setups, pairing the insert with the correct holder geometry helps to maintain edge stability. Practical selection and integration advice The insert is part of the Walter Schneidstoffsorte open series and its WIS10 designation indicates the SiAlON ceramic class; specific workpiece‑to‑grade recommendations should be confirmed in the product matrix or catalogue, as catalogue data determine the exact material match. When integrating into a production cell, consider toolholder rigidity, recommended cutting data for SiAlON ceramics, and the machining strategy to exploit the grade’s high‑speed advantages. Technical consultation is available for parameter selection and compatibility checks at info@metav-werkzeuge.com or +49 2822 7131930. For application‑specific recommendations on the Walter Tools SiAlON grade and to confirm suitability for particular materials, contact Metav Werkzeuge for technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: RCGX060600T01020-WIS10-WALTER Label: Drehwendeschneidplatte RCGX060600T01020 WIS10 Walter Tools Grade: WIS10 Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Plate size: 06 Plate thickness: 06 Corner radius: 0 Tolerance class: G Special features SiAlON cutting ceramic Designed for high cutting speeds and temperature resistance Round insert geometry Catalogue‑dependent material specification FAQ What materials is this insert designed to machine? The WIS10 grade is a SiAlON cutting ceramic intended for applications requiring high cutting speeds and thermal stability; the precise material suitability should be checked in the product matrix for RCGX060600T01020 WIS10. How does the round geometry affect machining? Round geometry offers multiple indexable cutting positions and a uniform cutting contour; for RCGX060600T01020 this supports steady engagement and consistent edge life in repeating turning cycles. What does the corner radius 0 mean for component finish? A corner radius of 0 provides a sharp tool tip for defined profiling and narrow groove work, enabling precise form generation when paired with an appropriate cutting strategy. Is the insert suitable for interrupted cuts? The SiAlON ceramic composition and the round form can perform in certain interrupted conditions, but toolholder rigidity and cutting strategy must be matched; consult the product matrix for confirmed recommendations for RCGX060600T01020 WIS10. How important is the tolerance class G for fitment? Tolerance class G indicates a defined level of dimensional accuracy to ensure consistent seating and repeatable clamping behaviour within compatible toolholders. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification of product compatibility and origin. There is no affiliation between our company and the named brands; the offered item is an original, factory‑new product of the specified manufacturer. Walter Tools is used here to identify the product’s manufacturer.
RCGX060600T01020 WIS30 WIS30 Wendeplatten - Walter Tools
Take advantage of the combination of high-speed SiAlON cutting performance and a round insert geometry with 7° clearance for stable, productive turning; order directly via Metav Werkzeuge or contact the technical consultants for application support. RCGX060600T01020 WIS30 — Round turning indexable insert, SiAlON ceramic, 7° clearance (Walter Tools) The RCGX060600T01020 WIS30 is a round turning indexable insert in a SiAlON ceramic grade, engineered for high-speed, temperature-resistant machining across appropriate ISO material groups. SiAlON ceramic grade WIS30 Round geometry, size 06 7° clearance angle for stable cutting Zero corner radius for true profiling Boosted productivity through high-speed ceramic performance The insert is manufactured in the SiAlON cutting ceramic class WIS30, a material designed for high-speed machining and excellent thermal resistance; this allows longer contact at elevated temperatures with less flank wear compared with conventional grades. The resulting benefit is a noticeable rise in cycle throughput and reduced downtime for tool changes, particularly when processing temperature-sensitive or hard-to-cut alloys. Selection should follow the product's ISO-material matrix to ensure the grade matches the workpiece. Consistent cutting behaviour from round geometry and edge form The round geometry combined with a zero corner radius delivers continuous cutting engagement and predictable chip flow, which helps to level out intermittent loads and to protect the cutting edge during interrupted cuts. The size designation 06 and matching thickness provide a stable seat in compatible toolholders, supporting consistent surface finish and repeatable results. This geometry is especially useful where frequent edge rotation and multiple cutting corners are required for cost-effective tool consumption. Clear specification and measured performance for process reliability With a 7° clearance and a tolerance class G, the insert provides defined relief and repeatable dimensional conformity that supports machining process control. These measurable attributes simplify setup and reduce variability in serial production. Where material suitability is not explicit, the available product matrix should be consulted; the insert’s design intent is to perform under elevated speeds, but the concrete application range depends on the selected ISO workpiece group. Practical support and industrial-grade brand assurance Backed by Walter Tools, the insert benefits from a manufacturer focus on stable cutting edges and consistent productivity in demanding industrial environments. For applications that demand high process reliability and a good surface finish, this insert offers a purpose-built option. If clarification is required on compatibility or cutting data, Metav Werkzeuge’s technical advisors can provide the necessary guidance to integrate the insert into an existing machining process. Contact Metav Werkzeuge for application advice or to request the Walter Tools RCGX060600T01020 WIS30 turning insert and tailored cutting data Technical data Article number: RCGX060600T01020-WIS30-WALTER SKU: RCGX060600T01020-WIS30-WALTER Manufacturer: Walter Tools Product type: Turning indexable insert Grade: WIS30 Series: Walter Schneidstoffsorte - Serie offen Facts Clearance angle: 7° Insert size: 06 Thickness: 06 Corner radius: 0 Tolerance class: G Special features SiAlON cutting ceramic (WIS30) Round insert geometry Designed for high-speed, temperature-resistant machining Series designation: Walter Schneidstoffsorte - Serie offen FAQ What materials is this insert intended for? The WIS30 grade is a SiAlON cutting ceramic formulated for high-temperature stability; suitability depends on the specific ISO workpiece group, so consult the product matrix for confirmed material compatibility with the RCGX060600T01020 WIS30 insert. How does the round geometry affect tool life and surface finish? Round geometry with a zero corner radius gives continuous cutting engagement and improved chip control, which tends to extend usable edge life and supports consistent surface finish when the RCGX060600T01020 is used in suitable turning operations. Is the clearance angle compatible with standard toolholders? The 7° clearance is a common relief specification intended to reduce rubbing and improve cutting action; compatibility should be verified against the toolholder pocket and clamping system before assembly. Hersteller: Walter Tools; Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names are used for clarification purposes only; there is no affiliation between Metav Werkzeuge and the referenced manufacturers. The offered item is original, factory-new goods from the manufacturer.
RCGX090700E WIS10 WIS10 Wendeplatten - Walter Tools
Take advantage of the combination of SiAlON cutting ceramic for high-speed machining, a 7° relief angle for controlled chip flow and the precision of a round geometry for versatile turning tasks; order directly via Metav Werkzeuge or request application advice from the technical team. RCGX090700E WIS10 round turning indexable insert – Walter Tools, SiAlON cutting ceramic, 7° relief RCGX090700E WIS10 is a round indexable turning insert designed for high-speed and temperature-stable turning applications in appropriate ISO material groups SiAlON cutting ceramic grade WIS10 Round geometry, size 09, thickness 07 7° relief angle for stable cutting Tolerance class G High-speed performance and thermal stability for productive turning The combination of SiAlON ceramic and an open Walter grade series delivers a cutting material engineered for high cutting speeds and temperature resistance, making it suitable for demanding finishing and semi-finishing operations where heat buildup is critical. The ceramic substrate helps maintain cutting-edge integrity under thermal stress, which reduces the frequency of indexable insert changes and supports a more continuous production rhythm. Check the product application matrix for concrete ISO material group suitability before process integration. Geometry and dimensions that support consistent chip control A round insert form with a 0 corner radius and a 7° relief provides symmetrical support around the cutting edge, improving load distribution and enabling predictable chip formation in interrupted or steady cuts. The item is specified as size 09 with thickness 07, and the tolerance class G defines the dimensional consistency that assists in repeatable set-ups and predictable tool life. These geometric attributes are particularly useful when a stable cutting edge and rotational balance are required on toolholders designed for round inserts. Practical selection advice and process benefits When selecting an indexable insert from the Walter Tools WIS10 series, consider the interaction between workpiece material and the SiAlON grade: ceramics excel at high-speed removal in hard or heat-sensitive materials but require rigid setups and appropriate cutting parameters. The product designation and series description recommend verifying the specific ISO groups in the product matrix; this ensures the chosen insert matches the part geometry and machining strategy. For further guidance on feeds, speeds and clamping solutions, Metav Werkzeuge offers technical consultation to support a smooth process integration. Contact Metav Werkzeuge for tailored application support on Walter Tools SiAlON turning inserts and fast, practice-oriented delivery via Metav Werkzeuge. Technical Data Article number: RCGX090700E-WIS10-WALTER Designation: RCGX090700E WIS10 Manufacturer: Walter Tools Facts Grade: WIS10 Series: Walter Schneidstoffsorte - Serie offen Relief angle: 7° Corner radius: 0 Shape: Round Size: 09 Thickness: 07 Tolerance class: G Special features SiAlON cutting ceramic (cutting material class) Suitable for high cutting speeds and temperature-stable cutting Sort and series description: check ISO material group matrix for suitability FAQ Is this insert suitable for machining stainless steels? The suitability for stainless steels depends on the ISO material group and cutting conditions; the Walter Tools WIS10 SiAlON grade is optimised for high-speed, temperature-stable operations, so verify the product matrix to confirm applicability. What are the main advantages of a round insert with 0 corner radius? A round insert with a 0 corner radius offers consistent support around the edge and good balance for interrupted cuts; the geometry suits finishing passes where a defined edge and predictable chip formation are required. How does the WIS10 grade behave at elevated cutting speeds? The WIS10 SiAlON ceramic is formulated for high cutting speeds and thermal stability, maintaining edge integrity under heat; suitable machining parameters and rigid clamping remain essential for optimal tool life. Which dimensions identify this insert for toolholder compatibility? Toolholder compatibility is determined by the insert designation RCGX090700E WIS10, along with the size 09 and thickness 07 values; use these identifiers when matching holders and clamps. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected product designations are mentioned solely for explanatory purposes. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer (Walter Tools).
RCGX090700E WIS30 WIS30 Wendeplatten - Walter Tools
Take advantage of a high-speed SiAlON cutting grade and the compact round insert geometry for efficient, temperature-resistant turning operations; order directly via Metav Werkzeuge or consult the team for application matching. RCGX090700E WIS30 — round indexable insert, SiAlON ceramic, 7° clearance (Walter Tools) The RCGX090700E WIS30 is a round indexable turning insert designed for high-speed and temperature-resistant metalcutting applications across suitable ISO material groups SiAlON ceramic grade WIS30 Round insert geometry, size 09 7° clearance angle for robust engagement Zero corner radius for form turning High-speed capability for productive turning The insert is built on a SiAlON cutting-ceramic grade, specifically WIS30, which is engineered for high cutting speeds and temperature-stable operation. This material class offers distinct advantages where conventional carbide reaches thermal limits: increased metal removal rates and longer periods between indexings. For production environments seeking a measurable boost in cycle time, the ceramic composition enables aggressive feeds without losing edge integrity, provided the workpiece material falls within the appropriate ISO groups. The round geometry also permits flexible entry angles, helping to maintain consistent chip formation. Stable edge performance and predictable wear A combination of the 7° clearance and the insert’s geometry promotes controlled contact with the workpiece, improving edge stability and surface consistency. The listed zero corner radius supports form turning and finishing where a defined profile is required, while the insert’s dimensioning (size code 09, thickness code 07) ensures compatibility with toolholders designed for compact round inserts. Because the cutting ceramic operates differently to carbide, tool life is governed more by thermal shock and chip evacuation than by abrasion; checking the operation matrix for the intended material helps to predict service intervals and avoid premature wear. Practical selection guidance and application fit Selection of this insert should be guided by the intended workpiece material and the machining strategy: WIS30 excels in high-speed roughing and semi-finishing of appropriate steels and heat-resistant alloys but requires coolant and machine stability suitable for ceramic tooling. The product’s series designation indicates an open-grade range—consult the product matrix to confirm suitability for alloys, hardened steels or temperature-sensitive tasks. For shops transitioning to ceramic inserts, engaging Metav Werkzeuge for specification support reduces the risk of mismatched cutting parameters and helps integrate the insert into existing tool cycles. For specification support or to confirm material compatibility for the Walter Tools RCGX090700E WIS30, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to arrange a tailored recommendation and procurement options Technical data Article number: RCGX090700E-WIS30-WALTER SKU: RCGX090700E-WIS30-WALTER Product type: Indexable turning insert Facts Grade: WIS30 (SiAlON cutting ceramic) Clearance angle: 7° Corner radius: 0 Insert shape: Round Size code: 09 Thickness code: 07 Tolerance class: G Materials & special features Series: Walter Schneidstoffsorte - Serie offen Material reference: Katalogabhängig Application note: Suitable for high-speed, temperature-resistant machining; check ISO material matrix for exact suitability FAQ What materials is this insert suitable for? The RCGX090700E WIS30 uses a SiAlON ceramic grade and is intended for high-speed, temperature-resistant machining; suitability depends on the ISO workpiece group, so consult the product matrix for exact material matches. How does the WIS30 grade differ from carbide options? WIS30 is a SiAlON cutting ceramic focused on higher cutting speeds and thermal stability, offering faster metal removal where carbide is thermally limited; the RCGX090700E WIS30 therefore suits aggressive cutting strategies with appropriate setup. What does the round insert shape provide in practice? The round geometry of the insert allows varied approach angles and smooth engagement, improving chip control and offering flexibility for form turning and interrupted cuts. Is coolant required with this ceramic insert? Coolant strategy depends on the machining scenario; WIS30 performs under elevated temperatures, but appropriate cooling and chip evacuation enhance tool life and process reliability. How to confirm the insert fits a toolholder? Verify the insert size and thickness codes (09 / 07) against the toolholder specifications and tolerance class G; Metav Werkzeuge can assist with compatibility checks and recommendations. Manufacturer / Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen Protected trademarks and trade names remain the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only. There is no connection between our company and the brands named. The offered item is an original, brand-new product of the manufacturer (Walter Tools).
RCGX090700T01020 WIS10 WIS10 Wendeplatten - Walter Tools
Take advantage of the combination of a SiAlON cutting ceramic grade and a 7° clearance angle for high-speed, temperature-resistant turning; the round geometry and standard 09 size provide versatile engagement across workpiece profiles — order the RCGX090700T01020 WIS10 insert directly via Metav Werkzeuge or consult our technical advisers for application-specific guidance. RCGX090700T01020 WIS10 Walter Tools — SiAlON ceramic round indexable turning insert, 7° clearance RCGX090700T01020 WIS10 is an indexable turning insert designed for high-speed applications and temperature-resistant machining in the appropriate ISO workpiece groups SiAlON cutting ceramic for high speeds 7° clearance angle for secure engagement Round geometry for versatile turning Check ISO workpiece group for suitability Reliable high-speed performance for productivity gains The SiAlON-based cutting grade delivers high cutting speeds and excellent thermal stability, which reduces tool wear in elevated-temperature machining. As a SiAlON cutting ceramic, the grade is engineered to maintain a sharp cutting edge where carbide tools may soften, enabling shorter cycle times and more consistent component tolerances. This translates directly into improved throughput in series production and reduced tool change frequency. Geometry and relief that enhance process security The round insert form, combined with a 7° clearance angle, promotes stable contact and predictable chip formation under variable cutting conditions. With a nominal size of 09 and thickness code 07, the insert supports flexible depth-of-cut strategies while the corner radius 0 allows close profiling and accurate finishing passes. The geometry contributes to repeatable surface quality and lower risk of vibration-related defects. Application guidance and material suitability The cutting grade belongs to a Walter open series and is intended for use according to the matching ISO workpiece groups; users should consult the product matrix for exact material recommendations. Where the workpiece and process call for ceramic performance — particularly in dry or high-temperature cutting of cast irons, hardened steels or heat-resistant alloys — the grade can offer distinct advantages in wear resistance and edge stability. A tolerance class of G supports consistent insert interchangeability in multi-tool setups. Contact Metav Werkzeuge for tailored application advice on Walter Tools SiAlON inserts and to determine if the RCGX090700T01020 WIS10 is the optimal choice for the intended machining task; technical consultants are available by e-mail or phone. Technical Data Article number / SKU: RCGX090700T01020-WIS10-WALTER Item designation: RCGX090700T01020 WIS10 Product type: Indexable turning insert Facts Clearance angle: 7° Insert size code: 09 Thickness code: 07 Corner radius: 0 Tolerance class: G Special features Grade: WIS10 (SiAlON cutting ceramic) Series: Walter cutting grade — open series Form: Round insert Application note: Check ISO workpiece group in product matrix for suitability FAQ What materials is this insert suited for? The answer depends on the ISO workpiece group; the RCGX090700T01020 WIS10 insert uses a SiAlON cutting ceramic intended for temperature-resistant, high-speed applications and is suitable for workpieces indicated in the manufacturer’s matrix. How does the round geometry benefit turning operations? A round insert provides multi-directional cutting engagement, smoother transitions on contours and flexible cutting direction, enhancing process stability during interrupted cuts. Is the 7° clearance angle important for tool life? Yes. The 7° clearance helps to reduce rubbing on the flank face, improving cutting efficiency and contributing to more stable tool life under high-temperature conditions. Can this insert be used for finishing passes? With a corner radius of 0 and the inherent edge stability of the SiAlON grade, the insert can be applied for close profiling and certain finishing operations where the material and cutting parameters are compatible. What should be checked before selecting this grade? Confirm the ISO workpiece group and required cutting speed range in the Walter product matrix to ensure that the WIS10 grade matches the material and process demands. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; there is no affiliation between Metav Werkzeuge and the trademark owners. The offered item is an original, factory-new product of the stated manufacturer.
RCGX090700T01020 WWS20 WWS20 Wendeplatten - Walter Tools
Combine high cutting-speed capability with a stable cutting edge and precise tolerance for efficient turning operations; order the RCGX090700T01020 WWS20 directly via Metav Werkzeuge or request technical advice from the consultants. RCGX090700T01020 WWS20 indexable turning insert, ceramic grade, Walter Tools The RCGX090700T01020 WWS20 is a round indexable insert for high-speed turning, designed for temperature-resistant machining and suited to metalcutting applications when matched to the product matrix Ceramic grade WWS20 for high cutting speeds 7° clearance angle for reliable chip formation Round insert, size 09, thickness 07 Tolerance class G for consistent interchangeability Maximise throughput with a ceramic cutting grade The WWS20 cutting ceramic is formulated for high cutting speeds, offering thermal stability that supports sustained performance in demanding turning operations. As a ceramic grade, it tolerates elevated temperatures better than conventional carbides, which can lead to shorter cycle times for suitable tasks. The consequence is improved machining efficiency where the workpiece material and machining strategy align with the grade’s capabilities. Check the manufacturer's product matrix to confirm the correct ISO workpiece groups for a given application. Stable geometry for reproducible surface quality A 7° clearance angle combined with a round insert geometry and tolerance class G ensures predictable engagement and reproducible results across index changes. The 0 nose radius reduces chatter in finishing passes where light cuts and stable contact conditions are required. This geometry supports steady chip flow and contributes to consistent surface finishes, helping to maintain part quality while reducing rework and inspection effort. Application guidance and material suitability The insert’s cutting ceramic composition is particularly suited to operations where temperature resistance and wear behaviour at high speed matter. Suitability for specific materials must be verified against the product matrix; the series: Walter Schneidstoffsorte - Serie offen indicates an open series where the exact material match is catalogue-dependent. For mixed-material runs or alloys outside the standard matrix, a trial cut or consultation will clarify whether the grade delivers the desired tool life and surface integrity. Practical handling and process benefits Designed as an indexable turning insert, the component facilitates quick index changes and predictable toolsetting, reducing downtime during production swaps. The insert designation and dimensional coding support straightforward inventory and quality control processes. Where process reliability and repeatability are priorities, the combination of ceramic grade performance and tolerance class G helps to reduce variance between assemblies and to maintain stable production output. Contact Metav Werkzeuge to confirm whether the Walter Tools RCGX090700T01020 WWS20 insert fits the intended material and machining strategy, or to request a technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: RCGX090700T01020-WWS20-WALTER Designation: RCGX090700T01020 WWS20 Product type: indexable turning insert Brand: Walter Tools Facts Clearance angle: 7° Nose radius: 0 Size: 09 Thickness: 07 Tolerance class: G Special features Grade: WWS20 (cutting ceramic) Series: Walter Schneidstoffsorte - Serie offen Execution: X Plate form: round Material specification: catalogue-dependent ISO designation: RCGX090700T01020 WWS20 FAQ What workpiece materials are suitable for the RCGX090700T01020 WWS20 insert? Suitability depends on the specific ISO workpiece group; the RCGX090700T01020 WWS20 (Walter Tools indexable turning insert) is a cutting ceramic grade optimised for high-speed applications—consult the product matrix to determine compatibility with particular materials. How does the 7° clearance angle affect machining performance? A 7° clearance angle reduces rubbing at the flank face and supports consistent chip formation, which in turn helps to maintain surface finish and extend the effective cutting window of the insert. Is the insert supplied with a coating or specific substrate? The grade is specified as WWS20 (cutting ceramic); further substrate or coating details are catalogue-dependent and should be verified in the product documentation or with Metav Werkzeuge. Can this insert be used for finishing passes? Yes—the round insert geometry with a 0 nose radius can be used for finishing where light depths of cut and stable conditions are present; process parameters should be adapted to the workpiece and machine rigidity. What does tolerance class G indicate for inspections and replacements? Tolerance class G denotes controlled manufacturing tolerances that facilitate reproducible positioning and interchangeability during index changes, simplifying quality control and replacement procedures. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Walter Tools is part of a global tool network and the Walter AG brand represents a leading provider of precision tooling. Protected trademarks and product names remain the property of their respective owners. Marked brand names are used for explanation only and denote original factory-new goods from the manufacturer.
RCGX120700E WIS10 WIS10 Wendeplatten - Walter Tools
Take advantage of the high-speed capabilities of the WIS10 SiAlON ceramic together with the precise fit and consistent tolerance to sustain productive turning cycles; order the insert via Metav Werkzeuge or consult the Metav team for application-specific advice. RCGX120700E WIS10 indexable turning insert — Walter Tools The RCGX120700E WIS10 is a round indexable turning insert designed for high-speed, temperature‑resistant turning in demanding production environments SiAlON ceramic for high cutting speeds Round insert, size 12 with thickness 07 7° free angle for light radial engagement Tolerance class G for consistent seating High-speed ceramic performance for productive turning The SiAlON cutting ceramic of the WIS10 grade is engineered for high cutting speeds and thermal stability, which allows greater spindle throughput on many turning operations. As an indexable insert, it converts the material properties of the ceramic into a practical productivity advantage: reduced cycle times at elevated surface speeds and improved wear resistance under temperature stress. The combination of a thermally stable cutting material and the insert’s geometry supports efficient chip removal and consistent cutting behaviour when the correct ISO material group is selected. Geometry and fit that support repeatability With a round form and a 0.00 mm corner radius, the insert promotes stable contact and predictable cutting forces for turning tasks requiring smooth contours. The specified 7° free angle reduces rubbing while still providing adequate strength at the cutting edge. The tolerance class G assures a uniform seat in toolholders designed for this insert series, which contributes to repeatable tool indexing and faster changeovers. These geometric attributes translate into measurable benefits in process stability and part-to-part consistency. Practical guidance on application and material selection The insert belongs to the Walter open series and its WIS10 designation indicates a SiAlON‑based ceramic suited to specific ISO groups; therefore, a check of the product matrix is recommended before final selection. For castings, steels or heat‑sensitive alloyed materials the ceramic’s resistance to high temperatures and abrasive wear can be advantageous, but optimal results depend on matching the cutting data and coolant strategy to the workpiece material. Where light engagement and fine surface finishes are required, the size 12 insert with thickness 07 offers a balance between edge strength and accessibility in confined geometries. For application advice, compatibility checks or availability of Walter Tools inserts including the RCGX120700E WIS10, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical guidance and ordering support Technical data Article number: RCGX120700E-WIS10-WALTER SKU: RCGX120700E-WIS10-WALTER Product type: indexable turning insert Designation: RCGX120700E WIS10 Manufacturer: Walter Tools Facts Insert size: 12 Thickness: 07 Free angle: 7° Corner radius: 0 Tolerance class: G Special features SiAlON cutting ceramic (WIS10) Series: Walter Schneidstoffsorte - Serie offen Round insert geometry Suitable for high cutting speeds; check ISO material group in product matrix FAQ Is this insert suitable for high-speed turning? The RCGX120700E WIS10 insert uses a SiAlON ceramic designed for high cutting speeds, making it appropriate where thermal stability and wear resistance are required. Which workpiece materials match the WIS10 grade? The WIS10 designation indicates a SiAlON cutting ceramic; suitability depends on the ISO material group and should be confirmed in the product matrix for each workpiece material. What does the tolerance class G mean for toolholders? Tolerance class G denotes a consistent seating precision, which helps ensure the indexable insert locates repeatably in toolholders designed for this series. Can the round form help with interrupted cuts? The round geometry provides a robust cutting edge and stable contact conditions; for interrupted cuts the RCGX120700E WIS10 benefits from ceramic wear resistance, though application specifics should be verified. Where can further technical data be obtained? Detailed application parameters and the complete product matrix are available from Metav Werkzeuge and the technical documentation for the RCGX120700E WIS10 insert Manufacturer/Responsible: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden, support.coromant@sandvik.com Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory‑new product of the manufacturer Walter Tools.
RCGX120700E WIS30 X Wendeplatten - Walter Tools
Take advantage of the combination of SiAlON cutting ceramic, a 7° relief angle and the compact round 12 format for reliable high‑speed turning and consistent tool life; order genuine inserts directly via Metav Werkzeuge or consult the technical team for application matching. RCGX120700E WIS30 indexable turning insert, SiAlON ceramic, 7° relief — Walter Tools RCGX120700E WIS30 is an indexable turning insert designed for high‑speed, temperature‑resistant machining in demanding production environments. SiAlON ceramic for high cutting speeds 7° clearance angle for secure cutting Round 12 insert for stable turning Walter Tools grade WIS30, series open Faster cycles through heat‑resistant SiAlON technology The insert’s core advantage is the SiAlON cutting‑ceramic grade, which delivers thermal stability and maintains cutting edge integrity at elevated speeds. This characteristic enables shorter cycle times where conventional carbides would lose edge life, so production throughput can be increased without compromising surface quality. The ceramic substrate is particularly effective when processes demand temperature resistance rather than ductile‑metal deformation control, and the WIS30 designation signals Walter Tools’ formulation tuned for such conditions. Predictable engagement and repeatable turning performance The round insert geometry combined with a 7° relief ensures a consistent cutting engagement and simplified approach to depth‑of‑cut selection. A zero corner radius supports precise small‑step turning and limits uncontrolled material bulging at the cutting edge. Together with the specified tolerance class G, this geometry provides stable, repeatable performance and straightforward tool path planning when integrating the insert into established turning cycles. Broad process orientation with application guidance This insert belongs to an open series from Walter Tools and is intended for operations where high cutting speeds and temperature resistance are required; material suitability must be verified against the manufacturer’s product matrix. The grade is optimised for processes that place a premium on edge retention under heat rather than chip compression, which makes it a good candidate where thermal resistance outperforms plasticity in determining tool life. For precise selection, refer to the product matrix and ISO material groups to match the grade to the workpiece material. Integration benefits and shop‑floor reliability As a standard indexable component, the insert allows fast replacement, reduced downtime and straightforward stock management compared with brazed or solid carbide alternatives. The execution marked as X and the compact 12/07 form factor permit compatibility with many tool holders designed for round inserts, simplifying inventory and setup. For first‑time integration, technical advisers can confirm holder seating and clamping parameters to ensure correct mounting and the intended chip control during operation. Contact Metav Werkzeuge for tailored application advice, tooling compatibility checks and to secure genuine Walter Tools WIS30 indexable turning inserts via Metav Werkzeuge; consultants are available by email or phone Technical Data SKU: RCGX120700E-WIS30-WALTER Product type: Indexable turning insert Model (without grade): RCGX120700E Core data Relief angle: 7° Corner radius: 0 Insert size: 12 Thickness designation: 07 Tolerance class: G Special features Series: Walter Schneidstoffsorte - Serie offen Grade: WIS30 Cutting material: SiAlON cutting ceramic (high temperature resistant) Execution: X ISO designation: RCGX120700E WIS30 Note: Check product matrix for material suitability FAQ What materials is this insert suited for? The Walter Tools insert RCGX120700E WIS30 uses a SiAlON ceramic substrate optimised for temperature‑resistant machining; suitability for specific workpiece materials should be checked against the manufacturer’s product matrix. How does the 7° relief angle affect machining? A 7° relief provides secure clearance behind the cutting edge while maintaining strength at the cutting face; in the case of the RCGX120700E WIS30, this contributes to stable engagement during turning cycles. Can the round 12 form be used for interrupted cuts? The round geometry of this indexable turning insert offers uniform engagement and can handle interrupted cuts better than many sharp‑corner inserts, provided the cutting parameters are adjusted for ceramic grades. Is this insert compatible with standard round insert tool holders? The RCGX120700E WIS30 is supplied in a common round format and can be mounted in tool holders designed for round inserts, but clamping and seating should be verified for execution X to ensure correct fit. How should chip control be assessed for ceramic grades? Chip behaviour with SiAlON ceramics differs from carbide; the WIS30 grade focuses on thermal resistance and edge life, so chip control should be validated in trial cuts and, where necessary, optimised by adapting feed and depth‑of‑cut. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names are the property of their respective owners. Brand names and registered product designations are mentioned solely for identification and explanation. There is no affiliation between our company and the cited brands. The offered item is original, factory‑new merchandise from the manufacturer.
RCGX120700T01020 WIS10 X Wendeplatten - Walter Tools
Take advantage of the combination of SiAlON ceramic performance, a 7° relief angle and the round geometry for fast, temperature-resistant turning and consistent surface quality; order the insert directly via Metav Werkzeuge or consult our advisors for process matching. RCGX120700T01020 WIS10 Drehwendeschneidplatte – SiAlON ceramic, 7° relief (Walter Tools) The RCGX120700T01020 WIS10 is a round turning insert engineered for high-speed, temperature-resistant machining applications, offering a Walter SiAlON ceramic grade suited to ISO-specified material groups. SiAlON ceramic grade for high-speed cutting 7° relief angle for stable cutting performance Round insert, size 12 with 0 corner radius Walter open-series grade WIS10 for wide material range Faster cycle times through high-speed ceramic cutting The use of SiAlON cutting ceramic in this insert enables substantially higher cutting speeds where process parameters allow, translating directly into shorter cycle times and improved throughput. The material’s temperature resistance reduces thermal wear at the cutting edge, which supports longer productive intervals between tool changes. For machining operations that demand elevated spindle speeds and thermal stability, this grade offers a measurable productivity advantage while maintaining consistent dimensional results. Stable cutting and improved surface consistency The 7° relief angle combined with the round geometry ensures a stable cutting engagement and helps to dampen vibrations during continuous cuts. A 0 corner radius supports fine finishing passes where minimal nose radius is required, contributing to predictable surface quality. Tolerance class G indicates adherence to strict manufacturing tolerances, which benefits reproducible seating in the toolholder and reliable repeatability across production lots. Broad applicability when matched to the ISO matrix The open Walter series WIS10 is a SiAlON-based ceramic intended for temperature-resistant applications; suitability across specific workpiece categories should be confirmed against the product’s ISO material matrix. When applied within its recommended material groups, the insert provides consistent wear behaviour and effective edge performance. The series flexibility supports a range of turning tasks, from semi-finishing to finishing, provided cutting parameters and machine rigidity are appropriate. Seamless fit into productive turning setups With the format and dimensions indicated, the insert integrates into standard turning toolholders designed for round inserts and supports easy indexing of fresh cutting edges for extended tool life. The series designation and execution facilitate selection from Walter’s range and simplify stock management. For best results, pair the insert with a rigid toolholder and stable clamping to exploit the ceramic’s strengths in high-speed applications while ensuring chip control and component quality. For technical matching or to secure compatible tooling, contact Metav Werkzeuge now—our specialists will advise on process parameters and availability and can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: RCGX120700T01020-WIS10-WALTER Label: Drehwendeschneidplatte RCGX120700T01020 WIS10 Walter Tools Product type: Drehwendeschneidplatte Manufacturer: Walter Tools Series: Walter Schneidstoffsorte - Serie offen Grade: WIS10 ISO designation: RCGX120700T01020 WIS10 Facts Relief angle: 7° Corner radius: 0 Plate form: Round Plate size: 12 Plate thickness: 07 Tolerance class: G Special features SiAlON cutting ceramic (WIS10) Temperature-resistant machining capability Series open Walter grade Execution: X Material information: Katalogabhängig FAQ What materials is this SiAlON insert suitable for? Suitability depends on the ISO material matrix; the WIS10 grade in this insert is designed for temperature-resistant, high-speed applications—check the product matrix for specific ISO groups before use. Is the insert ready for high-speed turning operations? Yes, the SiAlON composition and the 7° relief angle of the RCGX120700T01020 WIS10 are engineered to perform at elevated cutting speeds when used in appropriate, rigid setups. How does the round shape affect tool life and indexing? The round geometry provides uniform edge strength and allows multiple indexings for extended cutting life while maintaining consistent engagement and surface finish. Does the product require special clamping or toolholders? Standard toolholders for round turning inserts are suitable; however, a rigid clamping arrangement is recommended to exploit the ceramic’s high-speed and temperature-resistant properties. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
RCGX120700T01020 WIS30 X Wendeplatten - Walter Tools
Take advantage of the SiAlON cutting-ceramic grade and the 7° clearance angle together with the round 12 mm plate form for stable chip control and consistent high-speed performance; order via Metav Werkzeuge or consult the specialists for application-specific advice. RCGX120700T01020 WIS30 – Indexable Turning Insert, SiAlON Ceramic, Walter Tools The RCGX120700T01020 WIS30 is a round indexable insert intended for high-speed turning applications where temperature resistance and predictable wear behaviour are required SiAlON ceramic grade WIS30 for high cutting speeds 7° clearance angle for reduced cutting forces Round 12 mm plate form for stable chip control Zero corner radius for fine finishing and tight tolerances Optimised for high-speed machining with SiAlON technology The insert is manufactured in the WIS30 SiAlON cutting-ceramic, a material class designed for high-speed machining and excellent thermal stability. Ceramic grades such as this maintain cutting-edge integrity at elevated temperatures, which reduces flank wear during continuous high-speed turning. The result is a more consistent surface finish and extended productive tool life compared with conventional grades when applied under the correct cutting parameters. The chemistry and microstructure of SiAlON enable rapid metal removal rates while preserving dimensional reliability in temperature-sensitive operations. Geometry designed to reduce forces and control chips A modest 7° clearance angle combined with the round 12 mm plate geometry promotes low cutting forces and predictable chip flow. The insert’s geometry, including the zero corner radius, is optimised for finishing passes and for applications demanding tight tolerances. Reduced radial force translates into lower vibration and improved tool stability, which benefits both workpiece surface quality and machine spindle loads. The thickness code 07 and tolerance class G ensure a repeatable fit and seating in compatible toolholders, supporting process consistency in series production. Application guidance and integration into machining processes Selection of the correct cutting data must consider the ISO material group of the workpiece; the WIS30 grade is particularly suited where high-speed, temperature-resistant machining is required, but the exact applicability depends on the product matrix for specific ISO groups. The insert is supplied in a round form that aids chip formation under the right cutting conditions; when combined with suitable toolholder geometry and coolant strategy, the system delivers reliable performance. For integration into existing setups, check seating compatibility with the toolholder series and verify the recommended speed and feed ranges from the cutting data sheet supplied by the manufacturer. Walter Tools supports data sheets and matrices that clarify workpiece-group recommendations and process windows. For application advice or to specify the RCGX120700T01020 WIS30 from Walter Tools in a production setup, contact Metav Werkzeuge for tailored recommendations and rapid product availability. Technical Data Article number: RCGX120700T01020-WIS30-WALTER SKU: RCGX120700T01020-WIS30-WALTER Brand: Walter Tools Product type: Indexable turning insert Series: Walter Schneidstoffsorte - Serie offen Grade: WIS30 Dimensions & Angles Clearance angle: 7° Plate form: Round Plate size: 12 Plate thickness: 07 Corner radius: 0 Tolerance class: G Materials & Special Features SiAlON cutting-ceramic (WIS30) Designed for high-speed machining and temperature resistance Series description available in product matrix for ISO workpiece-group suitability Execution: X FAQ What materials is the insert suited to machine? The insert in grade WIS30 is a SiAlON cutting-ceramic intended for high-speed, temperature-resistant machining; suitability for specific materials should be checked against the Walter Tools product matrix for ISO workpiece groups. Is the RCGX120700T01020 WIS30 suitable for finishing operations? Yes, the round plate form with a zero corner radius is designed to support fine finishing and tight tolerances when used with appropriate feeds and speeds. How does the 7° clearance angle affect performance? The 7° clearance angle reduces cutting forces and helps maintain tool stability, which supports improved surface finish and lower vibration during turning. Where can cutting data and workpiece recommendations be obtained? Cutting data and the detailed ISO workpiece recommendations for the WIS30 grade are available in the Walter Tools product documentation and technical matrices. Is this insert compatible with standard toolholders? The insert follows common indexable insert dimensions and tolerance class G; verify seating compatibility with the chosen toolholder series before application. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarked names and product designations are the property of their respective owners. Brand names and registered trademarks are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered article is original, factory-new merchandise of the manufacturer.
RCMT0602M0-FM4 WMP20G WMP20G Wendeplatten - Walter Tools
Benefit from a combination of long tool life, secure chip formation and consistent performance that enhances production reliability; order the RCMT0602M0-FM4 WMP20G directly via Metav Werkzeuge or consult our specialists for application advice. RCMT0602M0-FM4 WMP20G turning insert — Tiger‑tec Gold coated, for stainless steels, Walter Tools A RCMT0602M0-FM4 WMP20G turning insert crafted for machining stainless steels under medium to robust conditions, offering a balance of wear resistance and predictable chip control. Tiger‑tec Gold coating for extended tool life Optimised FM4 chipbreaker for secure chip control Round RCMT form for versatile turning operations Suitable for machining stainless steels under load Improved productivity when machining stainless steels The Tiger‑tec Gold grade and the WMP20G composition deliver a wear‑resistant, coated carbide substrate that stabilises the cutting edge during tough stainless steel tasks. This results in stable chip formation and lower risk of build‑up on the cutting edge, which directly reduces downtime for regrinding or rework. As a round RCMT‑form insert with a modest relief angle, the geometry supports consistent contact with the workpiece and predictable tool life under varying feeds and depths. Precision geometry that simplifies chip control and surface quality The combination of the FM4 chipbreaker and the RCMT shape produces controllable chip segmentation, improving process reliability and surface finish in finishing or semi‑finishing passes. The coated surface lowers friction and heat transfer at the cutting zone, which helps to maintain dimensional accuracy and repeatability. This geometrical and material pairing supports a lower incidence of edge build‑up and promotes a smoother machining cycle, particularly when turning tougher austenitic stainless grades. Practical benefits for workshop efficiency and tool handling The insert’s standard RCMT form and the uniform thickness allow straightforward seating in common toolholders, enabling rapid indexation and fast replacement in production environments. Thanks to the Tiger‑tec Gold coating, the insert sustains wear resistance over a longer period, translating into fewer tool changes and improved uptime. The design is optimised for reliable performance rather than speciality micro‑finishing, making it a pragmatic choice for general turning operations where robustness and repeatable results are priorities. For reliable stainless steel turning with Walter Tools’ Tiger‑tec Gold grade, contact Metav Werkzeuge for availability and tailored application recommendations Technical data Article number: RCMT0602M0-FM4-WMP20G-WALTER Designation: RCMT0602M0-FM4 WMP20G Manufacturer: Walter Tools Facts Relief angle: 7° Insert size: 06 Thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Gold Grade: WMP20G Chipbreaker: FM4 Insert form: Round (RCMT) Execution: T Material group: Coated carbide Suitable for: stainless steels FAQ Is this insert suitable for austenitic stainless steels? Yes. The RCMT0602M0-FM4 WMP20G turning insert by Walter Tools is designed for stainless steels, offering controlled chip formation and enhanced wear resistance for austenitic grades. What advantage does the Tiger‑tec Gold coating provide? The Tiger‑tec Gold coating improves surface hardness and reduces friction at the cutting edge, which extends tool life and supports stable performance when machining stainless steels with the RCMT geometry. Which chipbreaker and form are used on this insert? This insert features the FM4 chipbreaker in a round RCMT form, optimised to produce short, controllable chips for a wide range of turning operations. Can the insert be used for finishing operations? The insert is appropriate for finishing and semi‑finishing passes where reliable edge condition and consistent surface quality are required; adjust feeds and speeds to match the specific stainless steel grade and machine capability. How does this product support workshop productivity? By combining a coated carbide grade with a robust chipbreaker, the RCMT0602M0-FM4 WMP20G reduces the frequency of tool changes and stabilises process results, helping to maintain continuous production. Manufacturer: AB Sandvik Coromant, Mossvägen 10, 811 34 Sandviken, Sweden; support.coromant@sandvik.com
RCMT0602M0-FM4 WSM10S WSM10S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating, a dedicated WSM10S grade and the FM4 chipbreaker for secure chip formation and extended tool life; order the insert via Metav Werkzeuge or consult their specialists for application-specific advice. RCMT0602M0-FM4 WSM10S turning insert — round insert with FM4 chipbreaker by Walter Tools The RCMT0602M0-FM4 WSM10S is a round indexable turning insert engineered for heavy-duty machining of hard-to-machine materials and, depending on the cutting geometry, for rostfreier Stahl. Tiger·tec Silver coated carbide grade WSM10S Suitable for rostfreier Stahl and superalloys FM4 chipbreaker for stable chip control Round 06 form with 7° clearance Reliable grade for demanding alloys and rostfreier Stahl The combination of the WSM10S grade and the Tiger·tec Silver technology delivers a coated carbide system optimised for materials that generate heat and resist cutting, such as rostfreier Stahl and heat‑resistant superalloys. This engineered coating enhances thermal stability and wear resistance, reducing flank wear during sustained operation. For production environments where repeatable performance and longer edge life matter, this grade supports consistent component quality and fewer insert changes, which improves overall machining efficiency. Consistent chip control and cutting geometry benefits Thanks to the FM4 chipbreaker and the round insert geometry, the design promotes predictable chip formation and evacuation even under interrupted cuts. The specified 7° clearance angle is engineered to balance cutting engagement and edge strength, helping to maintain a stable cutting edge during light to medium finishing passes. The insert’s tolerance class M and execution code T indicate manufacturing accuracy suited for precision turning tasks where dimensional consistency and surface quality are required. Practical shop-floor advantages and handling This round indexable insert in size 06 with thickness code 02 (RCMT0602M0-FM4) is simple to index and rotate, offering multiple cutting edges for economical use. The coated carbide construction minimises abrasive wear, while the robust grade supports secure chip formation, lowering the risk of built-up edge on rostfreier Stahl. For operations seeking a balance of productivity and tool life, the insert’s attributes translate into fewer tool changes, improved cycle times and reliable process stability. For secure and productive machining of rostfreier Stahl and high-temperature alloys, choose the Walter Tools RCMT0602M0-FM4 WSM10S turning insert — contact Metav Werkzeuge for ordering and application advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: RCMT0602M0-FM4-WSM10S-WALTER Product name: RCMT0602M0-FM4 WSM10S turning insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WSM10S Facts Form: Round Size: 06 Thickness code: 02 Clearance angle: 7° Chipbreaker: FM4 Tolerance class: M Execution: T Materials & special features Coated carbide Suitable for rostfreier Stahl and heat‑resistant superalloys (S / M) Designed for stable chip formation and improved edge life Round insert for strength and interrupted-cut capability FAQ What materials is this insert suitable for? The RCMT0602M0-FM4 WSM10S by Walter Tools is specified for rostfreier Stahl and heat‑resistant superalloys (S / M), offering a coated carbide grade optimised for these material groups. How does the FM4 chipbreaker affect performance? The FM4 chipbreaker on this turning insert supports controlled chip formation and evacuation, which contributes to stable cutting conditions and reduced likelihood of built‑up edge during turning. Is this insert appropriate for finishing rostfreier Stahl? Yes, the combination of the WSM10S grade and the 7° clearance supports finishing applications on rostfreier Stahl when matched with suitable cutting parameters and tool geometry. What does the tolerance class M indicate? Tolerance class M denotes the manufacturing accuracy of the insert; for the RCMT0602M0-FM4 WSM10S this means consistent edge positions and repeatable seating in toolholders for precision turning operations. Can the round form be used for interrupted cuts? The round shape provides a robust cutting edge that is well suited to interrupted cuts; the RCMT0602M0-FM4 design combines strength with chip control for such applications. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected trademarks (including Walter Tools) are mentioned for explanatory purposes only. There is no connection between our company and the mentioned brands. The offered item is original, factory‑new goods from the manufacturer.
RCMT0602M0-FM4 WSM20S WSM20S Wendeplatten - Walter Tools
Benefit from the combination of Tiger‑tec Silver coating, the FM4 chipbreaker and a 7° clearance for secure machining of stainless steel and heat‑resistant alloys; order the RCMT0602M0‑FM4 WSM20S directly via Metav Werkzeuge or consult our experts for application advice. RCMT0602M0‑FM4 WSM20S — Turning insert, Tiger‑tec Silver, 7° clearance | Walter Tools RCMT0602M0‑FM4 WSM20S is a round turning insert engineered for reliable finishing and semi‑finishing of stainless steel and demanding superalloys Tiger‑tec Silver coated carbide grade WSM20S FM4 chipbreaker for controlled chip formation 7° clearance angle for stable cutting action Round insert for smooth profile turning Stable cutting edges for difficult‑to‑machine materials The combination of the Tiger‑tec Silver coating and the WSM20S grade gives a predictable cutting edge that reduces edge build‑up when machining stainless steel and heat‑resistant alloys. Coated cemented carbide provides a thermal barrier and wear resistance; this improves tool life and supports continuous production runs. The insert’s design promotes consistent chip formation under the high temperatures and adhesive tendencies typical of these material groups, translating into fewer unplanned tool changes and better process reliability. Geometry and chip control that improve surface quality A round insert form paired with the FM4 chipbreaker ensures chip control across a range of depths of cut and feeds, while the 7° clearance minimises rubbing and reduces cutting forces. The specific chip‑forming geometry helps evacuate chips reliably in interrupted and continuous cuts, which supports smoother surface finishes and reduces the risk of built‑up edge. For practical workshop use, this means more consistent parts per shift and less rework due to poor surface integrity. Process security and broad application scope Tolerance class M reflects a consistent production tolerance that eases tool holder setup and repeatability. The coated carbide composition and series technology support machining in both ISO group M (stainless steel) and S (superalloys, titanium) applications as indicated by the grade characteristics. Backed by the Walter Tools portfolio, the insert offers a combination of thermal resistance and edge robustness designed for productive turning operations where material adhesion and heat are significant factors. Contact Metav Werkzeuge to discuss the RCMT0602M0‑FM4 WSM20S for specific stainless steel or superalloy applications; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and supply options Technical data SKU: RCMT0602M0-FM4-WSM20S-WALTER Article designation: RCMT0602M0-FM4 WSM20S Product type: Turning insert Manufacturer: Walter Tools Core data Clearance angle: 7° Plate size: 06 Plate thickness: 02 Tolerance class: M Special features Series: Tiger‑tec Silver Grade: WSM20S (coated cemented carbide) Chipbreaker: FM4 Shape: Round Applicable material groups: stainless steel (ISO M); superalloys / titanium (ISO S) FAQ What materials is this insert designed for? The RCMT0602M0‑FM4 WSM20S is engineered primarily for stainless steel (ISO group M) and for heat‑resistant superalloys and titanium (ISO group S), reflecting the grade’s focus on thermal resistance and stable chip formation. Which chipbreaker does the insert use and what is the benefit? The insert features the FM4 chipbreaker; this geometry supports controlled chip formation and evacuation, improving surface finish consistency and reducing the risk of built‑up edge when machining sticky materials. What coating and grade are specified for this insert? The insert uses the Tiger‑tec Silver series and the coated carbide grade WSM20S, combining coating technology with a carbide substrate to enhance wear resistance and thermal stability. What are the key geometric specifications to note? Key data for the insert include a round form, a 7° clearance angle, plate size 06 and plate thickness 02, with a tolerance class of M for consistent mounting and repeatability. Will this insert fit standard toolholders for RCMT inserts? Yes; the RCMT designation conforms to common indexable insert geometries, so the RCMT0602M0‑FM4 WSM20S is intended for toolholders that accept RCMT‑type inserts. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany The Walter AG (brand appearance: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Swedish Sandvik group. Protected trademarks and trade names are the property of their respective owners. Brand names are mentioned solely for explanatory purposes; no connection between our company and the mentioned brands is implied. The offered article is an original, factory‑new product of the manufacturer.
RCMT0602M0-FP4 WPP10G Wendeplatten - Walter Tools
Combining the Tiger·tec Gold coating with the FP4 chipbreaker delivers high wear resistance and controlled chip formation for consistent steel machining; the round RCMT form and 7° relief support stable cutting performance. Order the RCMT0602M0-FP4 WPP10G turning insert directly via Metav Werkzeuge or ask our consultants if needed. RCMT0602M0-FP4 WPP10G – Turning insert, Tiger·tec Gold, for steel | Walter Tools The RCMT0602M0-FP4 WPP10G is a round indexable turning insert with an FP4 chipbreaker, optimised for ISO P steel machining. Tiger·tec Gold coating for high wear resistance Optimised FP4 chipbreaker for stable chip control Suitable for steel machining (ISO P) Round RCMT 06 form with 7° relief Maximise tool life with advanced coating technology The combination of Tiger·tec Gold technology and a coated carbide substrate ensures notably improved wear resistance during continuous turning operations. The WPP10G grade is engineered to balance hardness and toughness—providing stable cutting edge integrity under the thermal and mechanical loads typical for steel turning (ISO P). This balance reduces tool changes and supports longer uninterrupted cycles, which contributes directly to process efficiency and lower overall tooling costs. The result is a robust insert that maintains form and performance through extended run times. Controlled chip formation for safer, more productive turning The FP4 chipbreaker has been developed to produce predictable chip shapes and lengths across common feed ranges. In combination with the round RCMT form and the 7° relief, the insert moderates chip flow and reduces the risk of entanglement or tool damage, particularly in medium to heavy roughing passes. By stabilising chip behaviour, the system helps prevent workpiece and tool surface damage and enables higher feed rates where process reliability is required. For users seeking consistent chip control, this geometry delivers tangible improvements in machining uptime. Seamless integration and dependable process reproducibility Designed as an indexable turning insert in the RCMT 06 format with a plate thickness of 02 and tolerance class M, this grade fits established toolholder systems and supports reproducible set-ups. The WPP10G cutting material is intended for a broad range of steel applications, combining wear resistance and sufficient toughness to handle typical turning tasks without frequent regrinds. If uncertainty remains about optimisation for a specific workpiece or cycle, technical advice and cutting data are available—please refer to the contact details below for tailored recommendations and feed/speed suggestions. For steel turning tasks where wear resistance and stable chip control are decisive, contact Metav Werkzeuge for specific cutting data, availability and application guidance for the RCMT0602M0-FP4 WPP10G insert. Technical Data SKU: RCMT0602M0-FP4-WPP10G-WALTER Label: Drehwendeschneidplatte RCMT0602M0-FP4 WPP10G Walter Tools Product type: Drehwendeschneidplatte (turning insert) Manufacturer: Walter Tools Series: Tiger-tec Gold Grade: WPP10G Base designation: RCMT0602M0-FP4 Core specifications Relief angle: 7° Plate form: Round Plate size: 06 Plate thickness: 02 Chipbreaker: FP4 Tolerance class: M Material group: P (steel) Features & applications Tiger·tec Gold coating technology Coated carbide cutting material FP4 chipbreaker for controlled chip formation Round RCMT geometry for multi-index use Suited for machining steel (ISO P) FAQ What materials is this insert designed for? The RCMT0602M0-FP4 WPP10G turning insert from Walter Tools is formulated for ISO P steels, offering a balance of wear resistance and toughness for common unalloyed and alloyed steel grades. How does the FP4 chipbreaker benefit machining? The FP4 chipbreaker delivers predictable chip forms and safer evacuation, improving stability in turning operations and reducing the likelihood of chip-related interruptions. What are the key dimensions and parameters? Relevant specifications include the RCMT 06 form, plate thickness 02, a 7° relief angle and tolerance class M, which together define fit and performance in compatible toolholders. Is this insert compatible with standard RCMT toolholders? The designation indicates compatibility with toolholders designed for RCMT 06 round indexable inserts; ensure holder geometry matches the insert form and clamping method. What does tolerance class M imply for setup? Tolerance class M denotes a medium tolerance level that supports reliable positioning and repeatability in common turning tool systems. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com