P4841P-3R-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP25S grade for consistent tool life and reliable chip control in high‑volume drilling and boring. The insert’s 3R‑A57 chipbreaker and compatible geometry ensure stable machining of steel and cast iron; order directly via Metav Werkzeuge or consult the technical team for application advice. P4841P-3R-A57 WKP25S — Drilling/boring indexable insert for steel & cast iron by Walter Tools P4841P-3R-A57 WKP25S is a coated carbide indexable insert from the Tiger·tec Silver family, designed for drilling and boring operations where consistent chip formation and long tool life are essential in steel and cast iron applications. Tiger·tec Silver coated carbide WKP25S Optimised chip control for steel and cast iron Robust edge for stable high-productivity cuts Compatible with P4841P-3R-A57 tool geometries Extended tool life through modern coating technology The Tiger·tec Silver coating combined with the WKP25S grade provides a balance of wear resistance and toughness that translates into longer tool life under typical drilling and boring loads. Coated carbide is engineered to withstand the thermal and abrasive stresses common when machining ISO P (steel) and ISO K (cast iron) workpiece groups, reducing frequency of insert changes and improving process uptime. The result is a measurable improvement in productivity in batch and continuous production environments. Predictable chip formation and surface finish The 3R‑A57 chipbreaker geometry is engineered for controlled chip segmentation and evacuation when cutting steels and cast irons. Consistent chip control reduces clogging and the risk of secondary damage, which helps maintain a stable cutting edge and reduces rework. This geometry supports reliable surface quality and repeatable hole accuracy in drilling and boring cycles, leading to fewer interruptions and a smoother machining process overall. Practical compatibility and production readiness Designed for use in standard drilling and boring toolholders that accept the P4841P geometry, this indexable insert integrates easily into existing toolsets and replacement cycles. The coated carbide construction suits a broad range of steels and cast irons, making it a versatile choice for general-purpose and demanding applications alike. For precise tool selection or adaptation to specific machine parameters, technical documentation is available and Metav Werkzeuge’s consultants can provide targeted guidance. For tailored machining recommendations with the Tiger·tec Silver WKP25S grade and availability of the P4841P-3R-A57 WKP25S insert, contact Metav Werkzeuge for immediate support and procurement options. Technical data Article number: P4841P-3R-A57-WKP25S-WALTER SKU: P4841P-3R-A57-WKP25S-WALTER Manufacturer: Walter Tools Product type: Drilling/boring indexable insert Series / grade: Tiger·tec Silver, WKP25S Geometry / chipbreaker: 3R-A57 Facts Material group: P / K (steel, cast iron) Coating: Tiger·tec Silver Substrate: coated carbide ISO designation: P4841P-3R-A57 WKP25S Special features Coated carbide grade for balanced wear and toughness Optimised chipbreaker for controlled chip formation Intended application: drilling and boring operations Broad applicability across steel and cast iron workpieces FAQ What materials is this insert suitable for? The P4841P-3R-A57 WKP25S insert from Walter Tools is formulated for ISO P (steel) and ISO K (cast iron) applications, reflecting its coating and substrate design for those material groups. How does the 3R‑A57 chipbreaker improve machining? The 3R‑A57 chipbreaker delivers controlled chip segmentation and evacuation, which enhances surface finish and reduces the risk of chip-related interruptions when machining steel and cast iron with the WKP25S grade. Can this insert be used in existing P4841P toolholders? Yes, the insert follows the P4841P geometry and is compatible with toolholders designed for that insert family, allowing straightforward replacement in drilling and boring assemblies. Is the WKP25S grade part of a larger product family? WKP25S belongs to the Tiger·tec Silver family; its coating and substrate combination are tuned for production reliability and broad material coverage in common machining tasks. Is this an original Walter Tools product and what is the SKU? This is an original factory-new Walter Tools indexable insert, sold under the SKU P4841P-3R-A57-WKP25S-WALTER; trademarks and brand names are the property of their respective owners and are used here for identification purposes only. Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P4841P-3R-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of the Tiger·tec Silver coating and the WKP35S grade for consistent chip control and long tool life; benefit from an insert designed specifically for drilling and reaming in Stahl and cast iron. Order the insert via Metav Werkzeuge or consult their technical team for cutting data and stock information. P4841P-3R-A57 WKP35S — Drill/Reamer Indexable Insert, Tiger·tec Silver, Walter Tools A robust P4841P-3R-A57 WKP35S indexable insert engineered for drilling and boring operations in industrial machining, optimised for Stahl and cast iron applications. Tiger·tec Silver coated carbide Suitable for Stahl and cast iron Optimised chipbreaker 3R-A57 Consistent wear resistance and life High-performance coating for predictable production The combination of the Tiger·tec Silver coating and the WKP35S carbide grade delivers a balance of thermal resistance and friction control that improves process stability in serial machining. The coating reduces adhesion and flank wear, which leads to more predictable tool life and fewer unplanned tool changes. For shops working across mixed batches, this translates into steadier surface quality and reduced downtime while machining Stahl and cast iron. Geometry and chip control that support drilling and reaming The P4841P-3R-A57 geometry with its 3R-A57 chipbreaker is designed to manage the typical chips produced when drilling and reaming in ferrous materials. The insert’s positive geometry promotes controlled chip formation and evacuation, lowering the risk of edge entanglement and bore surface defects. In practical terms, this results in increased process reliability for plunge drilling and enlargement operations and supports consistent bore accuracy during high-volume runs. Productivity through repeatable performance and application support Built for integration into standard drilling and reaming toolholders, the indexable design offers quick replacement and minimal spindle downtime, supporting lean production workflows. The coated, graded construction aids in maintaining a stable cutting edge under varying cutting speeds and feeds, which helps to sustain productivity across shift operations. For supplementary cutting data or to confirm suitability for specific workpiece alloys, technical enquiries are welcome — contact information for Metav Werkzeuge is available for tailored support and cutting-parameter recommendations. Contact Metav Werkzeuge for availability, cutting data and tailored technical advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: P4841P-3R-A57-WKP35S-WALTER SKU: P4841P-3R-A57-WKP35S-WALTER Designation: P4841P-3R-A57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte (drill/reamer indexable insert) Manufacturer: Walter Tools Data Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 3R-A57 Special features Coating: Tiger·tec Silver Material designation: P / K Main applications: Stahl, cast iron Insert geometry: P4841P-3R-A57 FAQ What materials is this insert suitable for? The P4841P-3R-A57 WKP35S insert is suitable for machining Stahl and cast iron according to the WKP35S grade characteristics and the Tiger·tec Silver coating. Does the WKP35S grade require specific cutting speeds? Cutting speeds depend on application and machine capabilities; the WKP35S grade with Tiger·tec Silver is optimised for typical industrial speeds used on Stahl and cast iron and benefits from process-specific parameter selection. How does the 3R-A57 chipbreaker improve drilling results? The 3R-A57 chipbreaker on the insert promotes controlled chip formation and evacuation, reducing the risk of chip build-up and improving bore surface consistency during drilling and reaming. Is this insert compatible with standard drill/reamer holders? The indexable design is intended for use in compatible drill and reamer toolholders that accept the P4841P-3R-A57 geometry; verify holder compatibility with the insert designation. Where can one obtain cutting data for this insert? Cutting data and application recommendations for the P4841P-3R-A57 WKP35S are available from Metav Werkzeuge or directly from Walter Tools technical documentation. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Die Walter AG (Markenauftritt: Walter Tools) mit Hauptsitz in Tübingen gehört zu den weltweit führenden Herstellern von Präzisionswerkzeugen für die Metallbearbeitung und ist Teil des schwedischen Sandvik-Konzerns. Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4841P-3R-A57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for reliable cutting performance in steel, stainless steel and heat‑resistant alloys; order the insert directly via Metav Werkzeuge or request advice from the consultants for optimal tool setup. P4841P-3R-A57 WSP45G drill/boring indexable insert – Tiger·tec Gold, Walter Tools The P4841P-3R-A57 WSP45G is a drill/boring indexable insert engineered for demanding machining of steel, rostfreier Stahl and heat‑resistant superalloys, providing stable cutting edges for consistent hole quality. Tiger·tec Gold coated carbide Versatile for P, M and S materials Stable cutting edge for extended life Increased process reliability under high loads The insert joins the Tiger·tec Gold family and is manufactured as a WSP45G PVD‑coated carbide grade, which delivers a balance of toughness and wear resistance. This combination reduces the risk of premature chipping when machining challenging materials and supports stable chip formation, which is essential for repeatable hole geometry. Where thermal load and adhesion threaten tool life, the coating's thermal barrier properties help to preserve the cutting edge and sustain cycle times. Consistent hole quality and extended tool intervals Thanks to the chipbreaker specification 3R‑A57 and the insert geometry, the component promotes controlled chip evacuation and a predictable cutting force pattern. That results in improved surface finish and tighter dimensional tolerances when enlarging or finishing bores. The grade is optimised for common workshop steels, rostfreier Stahl and high‑temperature alloys, enabling longer intervals between indexings and fewer tool changes—directly contributing to higher productivity and lower process variability. Practical choice for mixed‑material production This indexable insert is particularly useful where varied batch work requires a single grade to handle multiple alloys. The coated carbide construction supports a broad material range (P, M, S) so one toolholder setup can cover different workpieces without frequent grade swaps. For manufacturing environments seeking both flexibility and consistent output, the combination of geometry and coating offers an economical route to stable machining and fewer setups. Contact Metav Werkzeuge for tailored recommendations on Walter Tools Tiger·tec Gold inserts and secure dependable machining performance for your operations Technical Data Article number: P4841P-3R-A57-WSP45G-WALTER Description: Bohr-/Aufbohrwendeschneidplatte P4841P-3R-A57 WSP45G Walter Tools Manufacturer: Walter Tools Facts Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 3R-A57 ISO designation: P4841P-3R-A57 WSP45G Applicable material groups: P / M / S Special features Coating: PVD Tiger·tec Gold Material: Coated carbide (hartmetall) Suitable for: Steel, rostfreier Stahl, heat‑resistant superalloys and titanium Insert type: Drill/boring indexable insert FAQ What materials is this insert designed for? The WSP45G grade is formulated for machining steel, rostfreier Stahl and heat‑resistant superalloys (group P, M and S) and is specified for stable chip formation under these conditions. How does the Tiger·tec Gold coating benefit tool life? The Tiger·tec Gold coating on the WSP45G grade reduces wear and improves thermal stability, which helps maintain a stable cutting edge and extends the interval between indexings. Is this insert suitable for finishing bore operations? Yes; the chipbreaker 3R‑A57 and the insert geometry support controlled chips and a consistent cutting force, making it suitable for finishing and achieving improved surface quality. Can the same insert be used across mixed batches? The combination of coated carbide and the WSP45G grade allows one insert to handle a range of materials (P, M, S), making it a practical choice for mixed‑material production runs. Which series does this insert belong to and what does that imply? The insert is part of the Tiger·tec Gold series, indicating a PVD‑coated solution optimised for toughness and wear resistance in versatile milling and drilling/boring applications. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Protected trademarks and trade names belong to their respective owners. Brand names are used for identification and explanation only; there is no affiliation between Metav Werkzeuge and the trademark owners. The item offered is original, factory‑new Walter Tools equipment.
P4841P-3R-E57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S cemented carbide grade for reliable chip control and extended tool life; order the insert via Metav Werkzeuge or consult our specialists for machining recommendations. P4841P-3R-E57 WKP25S Drill/reamer indexable insert, Tiger·tec Silver — Walter Tools The P4841P-3R-E57 WKP25S is an indexable insert designed for drilling and boring operations, optimised for machining steel and cast iron in industrial production environments. Tiger·tec Silver coating technology WKP25S coated cemented carbide grade Optimised for steel and cast iron machining Stable chip formation and high productivity Increase throughput with a high-performance coating The Tiger·tec Silver surface treatment and the WKP25S grade deliver a measurable improvement in process stability and tool life. As a coated cemented carbide solution, the insert resists abrasive wear and maintains a sharp cutting edge for longer, which reduces the frequency of tool changes and supports continuous production. The result is higher part throughput with fewer interruptions and more consistent dimensional results during drilling and reaming tasks. Consistent chip control for dependable results Equipped with the chipbreaker 3R-E57, the geometry promotes controlled chip formation and evacuation, reducing the risk of built-up edge and improving surface finish. The insert is engineered for material groups P / K, which corresponds to steel and cast iron machining under ISO 513. For operations where repeatable chip shape and reliable evacuation are essential, this insert helps maintain cycle times and lowers the probability of part rejects. Broad material coverage reduces tooling complexity The WKP25S grade is a versatile, coated carbide formulated to cover a wide material range typical in general machining shops. Its balanced combination of hardness and toughness makes it suitable for unalloyed and alloyed steels as well as many cast irons, allowing fewer grade swaps across mixed production batches. For customers with variable batch mixes, this reduces inventory complexity and streamlines tool management without compromising performance. Practical integration and selection guidance for production The insert’s geometry and grade make it suitable for standard drilling and boring tool bodies that accept exchangeable indexable inserts, facilitating straightforward retrofitting. The cutting data recommended for P / K groups will achieve consistent results when combined with appropriate feeds and speeds for the workpiece and machine rigidity. For tailored cutting parameters and matching toolholders, Metav Werkzeuge’s consultants can provide specific recommendations to integrate the insert into an existing process. Contact Metav Werkzeuge today for tailored recommendations on Walter Tools inserts and rapid delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: P4841P-3R-E57-WKP25S-WALTER Designation: P4841P-3R-E57 WKP25S Type: Drill/reamer indexable insert Brand: Walter Tools Facts Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: 3R-E57 Applicable material groups: P / K (steel / cast iron) Special features Coated cemented carbide cutting material Balanced wear resistance and toughness Designed for stable chip formation and high productivity FAQ Which materials can be machined with this insert? The insert is suitable for steel and cast iron applications (material groups P and K), matching the intended use of the Tiger·tec Silver WKP25S grade. What advantage does the Tiger·tec Silver treatment provide? Tiger·tec Silver improves wear resistance and reduces friction at the cutting edge, which supports longer tool life and more consistent machining performance. How does the 3R-E57 chipbreaker affect production? The 3R-E57 chipbreaker shapes chips to improve evacuation and prevent clogging, leading to steadier surface quality and fewer process interruptions. Is the insert compatible with general drilling and boring tool bodies? Yes, the insert is designed for standard indexable tooling systems for drill and reamer applications and can be integrated into holders that accept the specified insert geometry. Walter Tools is a registered trademark of its respective owner. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered article is an original, factory-new product of the stated manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841P-3R-E57 WKP35S Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Silver coating and the WKP35S coated carbide grade for extended edge life and reliable chip control; this results in steady machining performance for steel and cast iron. Order the insert via Metav Werkzeuge or consult the team for application advice and optimisation. P4841P-3R-E57 WKP35S – Drilling/boring indexable insert, Tiger·tec Silver, Walter Tools P4841P-3R-E57 WKP35S is a purpose-built insert for drilling and bore-enlarging operations, designed to deliver consistent results in steel and cast iron machining applications Tiger·tec Silver coating for long tool life Optimised chipformer 3R‑E57 for reliable chips Suited for steel and cast iron machining Coated carbide grade WKP35S for stable edges Maximise process reliability for steel and cast iron The Tiger·tec Silver technology and the WKP35S grade combine to offer a coated carbide solution that is tailored to the thermal and abrasive demands of ISO groups P and K. This geometry and substrate pairing reduces edge wear and stabilises cutting forces, which contributes to predictable tool life and fewer unexpected tool changes. For workshops aiming to maintain cycle-time consistency, the result is improved uptime and a more controllable production rhythm. Controlled chip formation reduces interruptions The 3R‑E57 chipformer is engineered for dependable chip breaking during deep-hole drilling and bore enlargement, ensuring chips evacuate cleanly and steadily. Reliable chip control lowers the risk of recutting and tool clogging, which in turn supports higher feed rates and more efficient material removal. Process planners will appreciate the direct effect on throughput: stable chips mean fewer stoppages and more continuous machining. Durable coating and stable cutting edge for cost efficiency A coated carbide substrate with the Tiger·tec Silver finish provides enhanced resistance to abrasive wear and thermal softening. The result is a stable cutting edge that maintains form under typical drilling stresses, extending insert life and reducing tooling consumption. This performance translates into lower running costs per hole and a clearer return on tooling investment, especially in medium- to high-volume production of steel and cast iron components. Discuss Walter Tools Tiger·tec Silver inserts with Metav Werkzeuge for tailored recommendations and order options: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: P4841P-3R-E57-WKP35S-WALTER Name / designation: P4841P-3R-E57 WKP35S Manufacturer: Walter Tools Product type: Drilling/boring indexable insert Series: Tiger·tec Silver Facts Grade: WKP35S Chipformer: 3R‑E57 Applicable material groups: P (steel), K (cast iron) Material substrate: Coated carbide Special features Designed for drilling and bore-enlarging operations Coating technology: Tiger·tec Silver Optimised for stable chip control and edge life Suitable for unalloyed and alloyed steels and for cast iron FAQ What materials is this insert intended for? The insert is designed for machining steel (ISO group P) and cast iron (ISO group K) as indicated by the WKP35S grade and Tiger·tec Silver coating. How does the 3R‑E57 geometry affect production? The 3R‑E57 chipformer promotes consistent chip breaking and evacuation, reducing interruptions and enabling more continuous drilling or boring operations. Is the P4841P-3R-E57 WKP35S suitable for high-speed applications? The Tiger·tec Silver coating increases thermal resistance and wear performance, making the insert appropriate for demanding production speeds within recommended cutting parameter ranges. Which benefits does the WKP35S grade provide? WKP35S offers a balanced combination of wear resistance and edge stability, which supports predictable tool life and consistent surface results when working with steels and cast irons. What distinguishes this Walter Tools insert from standard grades? The combination of Tiger·tec Silver coating and the WKP35S substrate delivers enhanced process security and controlled chip formation compared with uncoated or conventional grades Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned exclusively for explanatory purposes. There is no connection between our company and the named brands. The offered article is original, brand-new merchandise of the manufacturer.
P4841P-3R-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the proven combination of Tiger·tec Gold coating and the WSP45G grade for stable cutting edges and consistent chip control in demanding drilling and boring operations; order the insert directly via Metav Werkzeuge or consult our specialists for cutting data and application advice. P4841P-3R-E57 WSP45G — Indexable drilling/boring insert with Tiger·tec Gold PVD, Walter Tools A P4841P-3R-E57 WSP45G is an indexable insert engineered for drilling and boring tasks in steel, stainless steel and heat-resistant superalloys, offering robust edge stability and reliable chip formation for productive machining. Tiger·tec Gold PVD coating Suitable for steel, stainless and superalloys Stable cutting edge and chip control Designed for productive drilling/boring Consistent chip control and extended tool life The combination of the Tiger·tec Gold coating and the WSP45G grade establishes a balance between hardness and toughness that contributes directly to longer tool life. The PVD-coated carbide substrate reduces flank wear under typical drilling loads while the geometry is tailored to support regular chipbreak and evacuation. This means fewer interruptions for insert changes and a more predictable production rhythm, which is particularly beneficial in high-volume or repeat-part environments where consistency reduces overall machining costs. Reliable performance across demanding materials The insert is specified for material groups P / M / S, signifying suitability for unalloyed and alloyed steel, stainless steel and heat-resistant superalloys such as titanium-based materials. Each group presents different challenges—both higher temperatures and tougher chip-forming behaviour—and the grade has been developed to handle these by favouring stable cutting edges and resistance to thermal loads. For workshops transitioning between mixed batches, this versatility minimises tool inventory while maintaining surface quality and dimensional reliability. Productivity gains through optimised chipbreaking The chipbreaker 3R-E57 is tuned for controlled chip fragmentation during drilling and boring, improving chip evacuation and reducing the risk of re-cutting. Practically, this translates into steadier feeds, fewer stalled cycles, and less manual intervention for chip clearing. The practical result is improved throughput and a lower per-part machining cost without compromising finish quality. Emphasising efficiency and repeatability, the insert supports process stability on both conventional and CNC machining centres. Easy integration and predictable inventory management Marked as P4841P-3R-E57, the insert follows common indexable insert conventions, simplifying integration into existing toolholders and tool management systems. The standardised designation assists purchasing and stock control; the grade and chipbreaker coding allow straightforward selection of suitable cutting parameters from existing cutting data guides. For production planners, the combination of a universal geometry and the Tiger·tec Gold coating means fewer tool variants are necessary, aiding lean inventory strategies and quicker setup routines. Contact Metav Werkzeuge for personalised application recommendations for the Tiger·tec Gold WSP45G insert; technical data and cutting parameters are available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: P4841P-3R-E57-WSP45G-WALTER Article designation: P4841P-3R-E57 WSP45G Product type: Indexable drilling/boring insert Manufacturer: Walter Tools Facts Material suitability: P / M / S Grade: WSP45G Coating technology: Tiger·tec Gold (PVD) Chipbreaker: 3R-E57 Special features PVD-coated carbide grade Optimised for stable cutting edge and chip control Versatile for steel, stainless steel and superalloys Series: Tiger·tec Gold FAQ What materials can this insert machine effectively? The insert is suitable for the ISO groups P / M / S, so it machines steel, stainless steel and heat-resistant superalloys effectively when the correct cutting data is applied. How does the Tiger·tec Gold coating affect performance? The Tiger·tec Gold PVD coating increases edge resistance to wear and thermal softening, which enhances tool life and helps maintain consistent dimensional accuracy throughout runs. What is the role of the 3R-E57 chipbreaker? The 3R-E57 chipbreaker promotes controlled chip formation and evacuation during drilling and boring, reducing recutting and improving process stability. Is this insert suitable for mixed-production environments? Yes, the combination of the WSP45G grade and its P/M/S suitability makes the insert versatile for shops producing components from different material groups, reducing the need for multiple specialised inserts. How should cutting data be established for this insert? Start with manufacturer recommendations for the P4841P-3R-E57 WSP45G grade and adjust speeds and feeds to match machine rigidity and workpiece clamping; modest increases in feed often yield productivity gains when chip control is stable. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is part of a global group of precision tooling companies. Protected trademarks and brand names remain the property of their respective owners and are mentioned solely for descriptive purposes. Products offered are original, factory-new items from the manufacturer.
P4841P-3R-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of consistent edge stability, reliable chip control, and versatile material suitability to maintain uninterrupted drilling and boring operations. Order the inserts directly via Metav Werkzeuge or consult the team for application advice. P4841P-3R-F57 WKP35S — Drilling/Boring indexable insert by Walter Tools P4841P-3R-F57 WKP35S is a purpose-designed indexable insert for drilling and boring applications, optimised for productive machining of steel and cast iron. Tiger‑tec Silver coating for long life WKP35S grade for stable cutting edge Chipbreaker 3R‑F57 for controlled swarf Suitable for steel and cast iron machining High productivity through advanced substrate and coating The combination of a coated carbide substrate and the Tiger‑tec Silver technology provides a clear performance advantage in drilling and boring tasks. The coated microstructure increases wear resistance and reduces flank wear during extended cycles, which directly contributes to a longer service interval and fewer tool changes. This results in a measurable uplift in process efficiency and predictable tool life, especially in serial production where repeatability matters. Consistent chip formation and fewer interruptions The 3R‑F57 chipbreaker geometry is designed to produce short, controllable chips when machining steel and cast iron, reducing the risk of chip entanglement and workpiece damage. Stable chip flow lowers cycle times by minimising manual intervention and clearing times. For machines and setups where uptime is critical, this geometry improves operational reliability and helps maintain consistent surface quality across a batch. Application-focused design for drilling and boring operations As an indexable insert developed for drilling/boring operations, the geometry and edge preparation target the thermal and mechanical demands typical of these processes. The WKP35S grade balances toughness and hardness to resist chipping under intermittent cuts while still delivering low wear rates in continuous cutting. The result is a tool component that supports higher cutting parameters without compromising dimensional control of the bore. Predictable performance for process stability Walter Tools’ development focus on repeatable manufacturing outcomes is reflected in the composition and finish of this insert. The controlled coating application and grade selection promote a stable cutting edge, which contributes to consistent bore tolerances and surface finishes. For production environments that prioritise process security and repeatable part quality, the insert offers a dependable solution that aligns with modern machining requirements. Contact Metav Werkzeuge for application recommendations or to request cutting data and availability — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: P4841P-3R-F57-WKP35S-WALTER Label: Bohr-/Aufbohrwendeschneidplatte P4841P-3R-F57 WKP35S Walter Tools Series: Tiger‑tec Silver Grade: WKP35S Chipbreaker: 3R‑F57 Material designation: P / K Product type: Bohr-/Aufbohrwendeschneidplatte Manufacturer: Walter Tools ISO designation: P4841P-3R-F57 WKP35S UID: P4841P-3R-F57-WKP35S-WALTER Core specifications Coating technology: Tiger‑tec Silver Substrate: coated carbide Target material groups: steel, cast iron Geometry: 3R‑F57 chipbreaker Application: drilling and boring indexable insert Special features and versions Optimised for stable chip control High wear resistance for prolonged tool life Balanced grade for toughness and hardness Designed for industrial drilling/boring operations Walter Tools quality and production standards FAQ What materials is this insert suited for? The insert is designed for machining steel and cast iron; the WKP35S grade and geometry specifically address the wear and chip characteristics of these groups. How does the Tiger‑tec Silver coating benefit the process? The Tiger‑tec Silver coating increases wear resistance and reduces heat-related wear, resulting in extended tool life and more consistent bore quality when using the insert. What advantage does the 3R‑F57 chipbreaker provide during drilling? The 3R‑F57 chipbreaker promotes short, controllable chips, reducing the need for manual chip handling and lowering the risk of chip-related interruptions in drilling and boring cycles. Is this insert suitable for heavy interrupted cuts? The WKP35S grade offers a compromise of toughness and hardness that helps resist chipping under intermittent loads while maintaining wear resistance for continuous operations. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and product names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation and identification. There is no connection between Metav Werkzeuge and the named manufacturers; the listed article is an original, factory-new product from the manufacturer.
P4841P-3R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade combined with the 3R‑F57 chipbreaker for stable chip control and prolonged edge life; order directly via Metav Werkzeuge or consult the technical team for application-specific advice. P4841P-3R-F57 WSP45G Drill/Boring Indexable Insert — Walter Tools The P4841P-3R-F57 WSP45G is a robust indexable insert optimised for drilling and boring tasks in demanding materials, offering reliable chip control and long tool life under high thermal and mechanical loads. Tiger·tec Gold PVD-coated carbide grade WSP45G Optimised 3R‑F57 chipbreaker for stable chip flow Suitable for Stahl, rostfreier Stahl and superalloys Designed for drilling and boring operations Stable chip control for shorter cycle times The combination of the 3R‑F57 chipbreaker and the insert geometry provides consistent chip control, reducing interruptions and the need for manual intervention. Controlled chip formation lowers the risk of edge build-up and protects the tool seat and spindle from irregular loading. For drilling and boring operations this translates into fewer tool changes and more reliable cycle times, supporting higher machine utilisation and predictable process planning. Broad material capability reduces tooling variants Manufactured for use in the ISO groups P / M / S, the grade is tuned for common workshop and production alloys: Stahl (unalloyed and alloyed steels), rostfreier Stahl (stainless steels) and heat‑resistant superalloys including titanium. The material classification clarifies the intended application range and helps to select one insert for different workpiece families, reducing inventory complexity and simplifying machining strategies. Tiger·tec Gold coating for thermal stability and edge protection The Tiger·tec Gold PVD technology, represented here by the WSP45G grade, provides a wear‑resistant, thermally stable surface that supports secure cutting edges under intermittent and continuous cutting conditions. The coating improves adhesion resistance and reduces flank and crater wear, which together extend the useful life of the insert. In practice, this means more consistent surface finishes and longer intervals between indexings or replacements. Practical benefits for drilling and boring operations As a drill/boring insert, this design emphasises repeatable positioning and reliable seating in standard toolholders. The geometry and coating combine to deliver a balance between edge stability and fracture resistance, particularly important when machining deeper holes or interrupted cuts. The result is improved process security and predictable component quality, which supports production planning and reduces scrap rates. Contact Metav Werkzeuge to discuss the P4841P-3R-F57 WSP45G insert for specific drilling applications or to request tailored machining recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: P4841P-3R-F57-WSP45G-WALTER Article designation: P4841P-3R-F57 WSP45G Product type: Bohr-/Aufbohrwendeschneidplatte (drill/boring indexable insert) Manufacturer: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Facts Chipbreaker: 3R‑F57 Compatible ISO groups: P / M / S Material group: P / M / S Special features Coating: Tiger·tec Gold (PVD) Substrate: coated carbide Application: drilling and boring Benefits: improved chip control, extended edge life, broad material coverage FAQ What materials are suitable for this insert? The P4841P-3R-F57 WSP45G is suitable for Stahl, rostfreier Stahl and a range of superalloys (ISO groups P / M / S), making it versatile for mixed‑material production environments. How does the 3R‑F57 chipbreaker affect machining? The 3R‑F57 chipbreaker promotes short, controllable chips during drilling and boring, improving process reliability and reducing the likelihood of chip entanglement in deep holes. What advantages does the Tiger·tec Gold coating bring? The Tiger·tec Gold PVD coating on the WSP45G grade enhances thermal resistance and wear protection, resulting in longer edge life and more consistent surface quality across runs. Is this insert compatible with standard drill/boring holders? Yes; the insert geometry is designed for conventional drill and boring toolholders, enabling straightforward integration into existing tool systems where this insert designation is supported. Can the same grade be used for milling and drilling? While WSP45G is optimised for a variety of cutting tasks, its properties make it especially effective for drilling and boring; suitability for milling depends on the specific holder and cutting parameters but the grade is designed for versatile PVD‑coated carbide applications. Manufacturer: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4841P-4R-A57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for extended tool life and stable chip formation in steel and cast iron machining; the optimised 4R‑A57 chipformer increases process reliability while reducing rework. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored recommendations. P4841P-4R-A57 WKP25S drilling/boring indexable insert – Tiger·tec Silver (steel, cast iron) by Walter Tools The P4841P-4R-A57 WKP25S is a coated carbide insert designed for drilling and boring applications, delivering consistent chip control and durable cutting performance in steel and cast iron. Tiger·tec Silver coating for extended tool life WKP25S grade for robust wear resistance Optimised 4R‑A57 chipformer for stable chips Designed for steel (P) and cast iron (K) Greater productivity through predictable performance The combination of Tiger·tec Silver surface technology and the WKP25S grade provides a clear productivity advantage: longer edge life and consistent cutting behaviour reduce tool changes and downtime. The result is improved component throughput and fewer interruptions in series production. For operations where reproducible results matter, the insert’s measured balance of wear resistance and toughness supports repeatable hole quality and reduced scrap rates. Reliable chip control for safer, faster machining The 4R‑A57 chipformer is engineered to shape and evacuate chips reliably during drilling and boring, which lowers the risk of clogging and tool damage. Stable chip formation contributes directly to enhanced process stability and better surface finishes, particularly in interrupted-cuts typical of cast components. In practice, the optimised chip geometry shortens cycle times by maintaining cutting efficiency over longer operating periods. Material-focused design for steel and cast iron This insert is intended for the ISO material groups P (steel) and K (cast iron), making it suitable for a wide range of unalloyed and alloyed steels as well as abrasive cast materials. The coated cemented carbide substrate withstands the thermal and mechanical demands of these groups, giving a dependable balance between wear resistance and toughness. For workshops facing mixed production runs, the grade reduces tool complexity by covering both principal material types with one insert solution. Practical benefits for workshop integration Compatibility with standard drilling and boring tool holders means the insert can be integrated into existing toolsets without major retrofitting. The stable cutting edge reduces the need for frequent inspections, while the predictable wear behaviour simplifies tooling inventory planning. For engineering teams seeking measurable process improvements, the insert supports a rational approach to cost-per-hole and lifecycle management. For high-productivity drilling and boring in steel and cast iron with Walter Tools Tiger·tec Silver inserts, contact Metav Werkzeuge for expert advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P4841P-4R-A57-WKP25S-WALTER Name: Bohr-/Aufbohrwendeschneidplatte P4841P-4R-A57 WKP25S Walter Tools Type: Bohr-/Aufbohrwendeschneidplatte (drilling/boring indexable insert) Grade: WKP25S Series: Tiger·tec Silver Manufacturer: Walter Tools ISO designation: P4841P-4R-A57 WKP25S Facts Material groups: P / K Main applications: Steel, Cast iron Chipformer: 4R-A57 Geometry designation: P4841P-4R-A57 Special features Coated cemented carbide grade (beschichtetes Hartmetall) Optimised chipformer for stable chips High process stability for drilling/boring Broad material coverage for steel and cast iron FAQ Which materials is this insert suitable for? The P4841P-4R-A57 WKP25S insert from Walter Tools is suitable for ISO groups P (steel) and K (cast iron), covering unalloyed and alloyed steels as well as abrasive cast materials. What is the advantage of the Tiger·tec Silver coating? Tiger·tec Silver on the WKP25S grade improves edge stability and wear resistance, which extends service life and reduces the frequency of insert changes in demanding drilling operations. How does the 4R‑A57 chipformer affect machining? The 4R‑A57 chipformer promotes controlled chip breakage and evacuation, enhancing process stability and reducing the risk of chip-related interruptions during drilling or boring. Can this insert be used in existing tool holders? The insert is designed for common drilling and boring applications and is compatible with standard indexable insert holders intended for the corresponding ISO geometry. Manufacturer: Walter Tools; Headquarters: Tübingen, Germany
P4841P-4R-A57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life, consistent chip control and reliable process security to keep machining cycles efficient and predictable. Order the insert directly via Metav Werkzeuge or consult the team for application-specific selection. P4841P-4R-A57 WKP35S Drilling/Reaming Indexable Insert for Stahl and Cast Iron - Walter Tools The P4841P-4R-A57 WKP35S is a coated carbide indexable insert from the Tiger‑tec Silver series, engineered for drilling and reaming tasks in Stahl and cast iron applications. Tiger‑tec Silver coating for high wear resistance Optimised 4R‑A57 chipbreaker for stable chips Suitable for Stahl (P) and cast iron (K) Coated carbide grade WKP35S for long tool life Delivering long tool life and consistent throughput The Tiger‑tec Silver technology combined with the WKP35S grade provides high wear resistance and a stable cutting edge, which reduces downtime for tool changes and regrinds. As a coated carbide solution, this insert balances toughness and hardness to resist abrasive wear from cast materials while maintaining edge integrity in interrupted cuts. The result is more predictable tool life and reduced process variability, supporting higher machine utilisation and lower unit costs per part. Better chip control for safer, faster machining The integrated 4R‑A57 chipbreaker is optimised for the typical chip forms encountered when machining Stahl and cast iron. By producing short, controllable chips, the geometry minimises the risk of chip entanglement and reduces the need for secondary chip management. This improvement in chip behaviour contributes directly to surface quality and reduces rework, so production runs complete more smoothly and finishing steps are more consistent. Practical application: where this insert adds value Designed as a drilling/reaming indexable solution, the insert supports a range of catalogue-dependent geometries and is suitable where robust, repeatable performance is required. The combination of the Tiger‑tec Silver coating and the WKP35S cutting material makes the grade particularly effective for mixed-series production where both Stahl and cast iron must be addressed without frequent tool changes. The insert’s design enables straightforward mounting in compatible holders and offers an economical alternative to solid tools for high-volume or variable-batch manufacturing. Contact Metav Werkzeuge today for help selecting the right Walter Tools P4841P-4R-A57 WKP35S insert for specific applications and to check availability and delivery options. Technical data SKU: P4841P-4R-A57-WKP35S-WALTER Designation: P4841P-4R-A57 WKP35S Product type: Bohr-/Aufbohrwendeschneidplatte Brand: Walter Tools Facts Series: Tiger‑tec Silver Grade: WKP35S Chipbreaker: 4R‑A57 Material code: P / K Special features Coating technology: Tiger‑tec Silver Substrate: coated carbide Intended materials: Stahl (P), cast iron (K) Geometry: drilling/reaming indexable insert Benefits: wear resistance, stable chip formation, productive machining FAQ Which workpiece materials are suitable for this insert? The insert is intended for machining Stahl (ISO group P) and cast iron (ISO group K); the WKP35S grade and Tiger‑tec Silver coating balance abrasive wear resistance and edge stability for these materials. What does the 4R‑A57 chipbreaker provide? The 4R‑A57 chipbreaker ensures controlled, short chips during drilling and reaming, improving chip evacuation and reducing the likelihood of chip-related interruptions. Is this insert appropriate for interrupted cuts or heavy machining? The coated carbide construction and Tiger‑tec Silver technology give the insert enhanced toughness and wear resistance, making it suitable for many interrupted-cut and moderately heavy-machining scenarios within its intended material groups. How is the insert identified in catalogues and ordering systems? This product is listed under the designation P4841P-4R-A57 WKP35S and the SKU P4841P-4R-A57-WKP35S-WALTER; Walter Tools documentation provides matching holder and geometry information. Can the same grade be used across mixed-series production? Yes, the WKP35S grade is designed to offer versatile performance across Stahl and cast iron, reducing the need for frequent grade changes when batches include both material types. Manufacturer: Walter AG (Walter Tools); Tübingen, Germany. The Walter AG (brand: Walter Tools) is part of the global Sandvik group. Protected trademarks and trade names remain the property of their respective owners. Brand names are used for clarification only and do not imply any connection between Metav Werkzeuge and the listed manufacturers.
P4841P-4R-A57 WSP45G WSP45G Wendeplatten - Walter Tools
Take advantage of the Tiger·tec Gold coating and the WSP45G grade for a combination of edge stability and broad material capability; the result is reliable performance across steel, stainless steel and heat‑resistant alloys and lower process variability. Order directly via Metav Werkzeuge or request tailored advice from the consultants for an optimised tooling solution. P4841P-4R-A57 WSP45G – Drilling and boring indexable insert, Tiger·tec Gold, Walter Tools The P4841P-4R-A57 WSP45G is a drilling and boring indexable insert engineered for stable cutting and consistent chip control when machining steel, stainless steel and heat‑resistant alloys Tiger·tec Gold PVD coating Suitable for steel, stainless and alloys Stable cutting edge for process security Optimised chip control for smooth machining Reliable edge life for continuous production The combination of Tiger·tec Gold technology and the WSP45G grade yields a PVD‑coated carbide that emphasises stable cutting edge behaviour under the thermal and mechanical loads typical of holemaking operations. This stability translates into longer tool life and fewer indexings, which reduces cycle interruptions and supports higher throughput. The robust grade formulation also minimises flank wear and helps maintain dimensional consistency during extended runs, contributing directly to improved overall equipment effectiveness. Predictable chip control that lowers rework rates The insert’s 4R‑A57 geometry is designed to promote controlled chip formation and evacuation, reducing the risk of built‑up edge and surface damage. Enhanced chip control improves swarf removal from the bore and reduces the likelihood of recut marks, which in turn lowers secondary operations and rework. For materials such as stainless steel and heat‑resistant alloys, reliable chip handling is particularly valuable because it mitigates heat concentration and supports a better surface finish, even under challenging cutting conditions. Versatility for mixed‑material production environments As a compact indexable insert with broad applicability to the P / M / S groups, this grade is well suited to mixed production where quick tool changeovers are needed. The insert integrates with standard holders for drilling and boring operations, allowing straightforward adoption without extensive fixture changes. The result is balanced performance across a range of workpieces, enabling high productivity and consistent process outcomes while simplifying inventory through a single, multipurpose grade from Walter Tools. Contact Metav Werkzeuge to discuss the P4841P-4R-A57 WSP45G insert and secure the optimal Tiger·tec Gold solution for specific machining tasks — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: P4841P-4R-A57-WSP45G-WALTER Product designation: P4841P-4R-A57 WSP45G Product type: Bohr-/Aufbohrwendeschneidplatte Core specifications Grade: WSP45G Series: Tiger·tec Gold Geometry / chipformer: 4R‑A57 Applicable material groups: P / M / S Special features Coating technology: PVD (Tiger·tec Gold) Suitable for: steel, stainless steel, heat‑resistant alloys Manufacturer: Walter Tools FAQ What materials can be machined with this insert? The P4841P-4R-A57 WSP45G insert is suitable for steel, stainless steel and heat‑resistant alloys, matching the P / M / S material groups indicated for the WSP45G grade. How does the Tiger·tec Gold coating benefit holemaking? The Tiger·tec Gold coating on the WSP45G grade improves heat resistance and wear behaviour, which helps maintain cutting edge stability during drilling and boring operations. Which chip behaviour can be expected with the 4R‑A57 geometry? The 4R‑A57 chipformer promotes controlled chip formation and evacuation, reducing swarf accumulation in the bore and supporting a consistent surface finish. Is the insert compatible with standard holders for drilling and boring? The insert’s designation P4841P‑4R‑A57 corresponds to common geometries for drilling and boring indexable systems and is intended for use with compatible standard holders. Why choose this grade for mixed production? WSP45G is a versatile PVD‑coated carbide grade that balances toughness and wear resistance, offering dependable performance across a variety of materials and helping to simplify tooling choices in mixed batches. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
P4841P-4R-E57 WKP25S Wendeplatten - Walter Tools
Benefit from the combination of the Tiger‑tec Silver grade WKP25S for extended tool life and the 4R‑E57 chipbreaker for controlled chip formation in demanding drilling and boring operations; the insert is optimised for steel and cast iron, ensuring consistent productivity. Order the P4841P-4R-E57 WKP25S insert directly via Metav Werkzeuge or ask our consultants if needed. P4841P-4R-E57 WKP25S drilling/boring indexable insert, Tiger‑tec Silver – for steel & cast iron | Walter Tools A P4841P-4R-E57 WKP25S insert engineered for high process stability in drilling and boring, combining a proven chipbreaker geometry with Tiger‑tec Silver coating technology for reliable performance in ISO P and K materials. Tiger‑tec Silver coated carbide grade WKP25S Optimised 4R‑E57 chipbreaker for stable chips Suited for steel (P) and cast iron (K) High process reliability for drilling/boring Delivering consistent chip control for reliable drilling The combination of the 4R‑E57 chipbreaker geometry with the WKP25S cutting grade provides predictable chip control during drilling and boring operations in ISO P and K materials. This inserts’ geometry reduces irregular chip formation and minimises the risk of jamming, which helps to sustain steady feed rates and reduces unplanned interruptions. The design supports stable cutting forces and improved heat management, which together contribute to longer tool life and fewer tool changes in continuous production runs. Coating and grade technology that extend tool life and uptime Built on coated carbide technology within the Tiger‑tec Silver series, the insert is optimised for combined wear resistance and edge robustness. The coating strategy reduces abrasive wear when machining cast iron and mitigates flank wear during steel machining, delivering measurable improvements in wear resistance and process reliability. For operations that prioritise productivity, this results in fewer indexings and maintenance cycles, enhancing overall production efficiency without sacrificing surface quality. Integration into machining processes and practical benefits As an indexable insert for drilling and boring tool systems, the item is compatible with standard Walter Tools toolholders designed for insert geometry P4841P‑type. The plate’s balanced geometry supports stable cutting edges that lower vibration and help maintain hole quality over time. For optimal results, match the plate to appropriate feeds and speeds recommended for ISO P and K groups and ensure secure clamping in the chosen holder; this approach yields repeatable results and supports consistent part tolerances across batches. Choose the Walter Tools Tiger‑tec Silver WKP25S grade for dependable chip control and sustained productivity — contact Metav Werkzeuge to discuss application matching and availability at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: P4841P-4R-E57-WKP25S-WALTER Designation: P4841P-4R-E57 WKP25S Product type: drilling/boring indexable insert Manufacturer: Walter Tools Series: Tiger‑tec Silver Grade: WKP25S Chipbreaker: 4R‑E57 Material application groups: P / K Core technical data Suitable for ISO groups: P (steel), K (cast iron) Cutting material: coated carbide Application: drilling and boring operations Series classification: Tiger‑tec Silver Special features and functions Coating technology: Tiger‑tec Silver Optimised for stable chip formation Designed for high process reliability Broad material coverage for steel and cast iron FAQ What materials can this insert machine effectively? The P4841P-4R-E57 WKP25S insert is formulated for ISO groups P (steel) and K (cast iron), making it suitable for a wide range of unalloyed and alloyed steels as well as common cast iron grades. How does the 4R‑E57 chipbreaker improve machining? The 4R‑E57 chipbreaker controls chip shape and evacuation, reducing hanging chips and ensuring smoother cutting conditions during drilling and boring, which improves process stability and tool life. Is the Tiger‑tec Silver coating beneficial for productivity? Yes, the Tiger‑tec Silver coating on the WKP25S grade enhances wear resistance and thermal stability, which supports longer intervals between tool indexings and contributes to higher overall productivity. Can the insert be used in existing Walter toolholders? The P4841P‑type geometry is compatible with matching Walter Tools toolholders designed for this insert designation; correct holder selection ensures secure clamping and optimal cutting performance. Does this insert suit roughing and finishing operations? The WKP25S grade and the 4R‑E57 geometry are optimised for stable chip control and robust edge life, making the insert appropriate for a range of drilling and boring tasks where consistent material removal and reliable hole quality are required. Manufacturer: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841P-4R-E57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of long tool life and stable chip control delivered by the Tiger·tec Silver grade; the robust design reduces downtime and supports consistent production quality. Order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. P4841P-4R-E57 WKP35S — drilling/reaming indexable insert (Tiger·tec Silver) by Walter Tools P4841P-4R-E57 WKP35S is a coated carbide indexable insert designed for productive machining of steels and cast irons in industrial drilling and reaming operations. *Tiger·tec Silver coating for process security *WKP35S coated carbide grade for long life *Chipbreaker 4R-E57 for stable chip control *Designed for steel (P) and cast iron (K) Greater uptime through a wear-resistant grade The use of Tiger·tec Silver technology in the WKP35S grade results in a coated carbide insert that is engineered to resist abrasive wear and maintain a stable cutting edge over extended cycles. This stability reduces the frequency of tool changes, which directly lowers machine idle time and supports higher overall equipment effectiveness. The coating system also contributes to consistent edge integrity in interrupted cuts, which is especially valuable when machining cast components or mixed batches. Improved chip control for safer, faster cycles The 4R-E57 chipbreaker geometry is tailored to produce compact, predictable chips when working with both steel and cast iron. Controlled chip formation reduces the risk of entanglement, supports consistent coolant flow, and enables higher feed rates where machine and workpiece rigidity permit. For production environments the result is fewer interruptions and a smoother material flow through the manufacturing process. Reliable surface quality and repeatable results A combination of the grade and geometry delivers reproducible surface finishes and dimensional stability part-to-part. The hardened coating and substrate pairing minimise edge degradation, which preserves cutting performance over many components. This repeatability supports quality control targets and lowers scrap rates, delivering a measurable process advantage in series production and small-batch runs alike. Practical compatibility and application notes The insert designation P4841P-4R-E57 WKP35S corresponds to a drilling/reaming insert format that is compatible with cutter systems designed for indexable plates of this type. The grade is optimised for ISO material groups P (steel) and K (cast iron), addressing the typical heat and chip characteristics of those materials. Selection of speeds and feeds should follow machine capability and rigidity guidelines; the insert is intended for productive machining rather than fine finishing. Contact Metav Werkzeuge for tailored application support and ordering of Walter Tools Tiger·tec Silver inserts; reach the Metav team at info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and availability Technical Data SKU: P4841P-4R-E57-WKP35S-WALTER Designation: P4841P-4R-E57 WKP35S Manufacturer: Walter Tools Facts Series: Tiger·tec Silver Grade: WKP35S Material code: P / K Special features Coated carbide Chipbreaker: 4R-E57 Application: Steel (P), Cast iron (K) Product type: drilling/reaming indexable insert Supplier series: Tiger·tec Silver FAQ Which materials are best suited to this insert? The P4841P-4R-E57 WKP35S insert is optimised for steel (P) and cast iron (K) applications following ISO material groupings, making it suitable for a wide range of unalloyed and alloyed steels as well as grey and nodular cast irons. What does the WKP35S grade provide? The WKP35S grade, part of the Tiger·tec Silver family from Walter Tools, is a coated carbide formulation designed for enhanced wear resistance and extended tool life in demanding drilling and reaming operations. How does the 4R-E57 chipbreaker affect machining? The 4R-E57 chipbreaker promotes compact, controlled chips for safer evacuation and reduced risk of clogging, improving cycle stability and enabling higher productive feeds where machine rigidity permits. Is this insert compatible with indexable drill holders of the same designation? Yes, the insert follows the P4841P-4R-E57 designation and is intended for cutter bodies and holders that accept this indexable plate format; compatibility should be confirmed with the cutter system documentation. What operational benefits can be expected in series production? Using the WKP35S insert yields longer edge retention and predictable chip behaviour, which together reduce tool changes, improve uptime and support consistent part quality across production batches. Manufacturer: Walter Tools; Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and product names are the property of their respective owners. Reference to brand names is for explanation only; there is no affiliation between our company and the mentioned brands. The offered article is original, factory-new merchandise of the manufacturer.
P4841P-4R-E57 WSP45G WSP45G Wendeplatten - Walter Tools
Benefit from the combination of Tiger·tec Gold coating and the tough WSP45G grade for reliable chip control and consistent edge security; order directly via Metav Werkzeuge or contact our consultants for tailored application advice. P4841P-4R-E57 WSP45G Drilling/Boring indexable insert — Tiger·tec Gold PVD, Walter Tools P4841P-4R-E57 WSP45G is a PVD-coated drilling and boring indexable insert developed for demanding machining of steel, stainless steel and heat-resistant alloys. Tiger·tec Gold PVD coating Versatile for Steel, stainless steel, titanium Stable chip formation and edge security Chipbreaker 4R-E57 for controlled evacuation Enhanced performance for demanding materials The combination of Tiger·tec Gold technology and the WSP45G grade delivers a robust, PVD-based cutting solution that balances toughness and thermal resistance. Designed to cope with the typical heat generation and chip behaviour of steel and the higher strain of stainless steel, the grade also supports machining of heat‑resistant superalloys and titanium where tool stress and temperature are critical. The material-adapted cutting geometry helps reduce edge degradation and supports longer tool life, making the insert a sound choice where consistent part quality is required. Predictable chip control and stable process reliability The integrated chipbreaker 4R-E57 is engineered for dependable chip control, promoting smooth evacuation in through-hole and peripheral cutting operations. This stability reduces interruptions caused by chip packing and minimises rework, increasing overall productivity. As a result, cycle times become more predictable and tool-change frequency can be reduced, supporting uninterrupted production runs and better utilisation of machine capacity. Versatility across drilling, boring and milling tasks Although optimised for drilling and boring applications, the grade offers versatility that is advantageous where operations combine drilling with peripheral milling or light roughing. The indexable insert format allows quick replacement and adaptation to varied toolholders, which supports flexible production layouts and fast setup changes. For workshops seeking a single insert family to cover several operations, this solution reduces inventory complexity while maintaining machining quality. Practical selection and integration guidance Selection of the correct insert geometry and cutting data is essential to exploit the WSP45G advantages fully; choose toolholders and feed rates that support the chipbreaker function for reliable behaviour. If guidance on parameter windows or compatible toolholders is needed, Metav Werkzeuge provides application-oriented support and can advise on integration into existing tool systems. For specific component materials or unconventional setups, a short consultation will help determine the best configuration for consistent results. Discuss machining requirements with Metav Werkzeuge for optimal application of Walter Tools Tiger·tec Gold inserts — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: P4841P-4R-E57-WSP45G-WALTER Designation: P4841P-4R-E57 WSP45G Product type: Drilling/Boring indexable insert Grade: WSP45G Series: Tiger·tec Gold Chipbreaker: 4R-E57 Material suitability: P / M / S Core specifications ISO designation: P4841P-4R-E57 WSP45G SKU: P4841P-4R-E57-WSP45G-WALTER Features & applications PVD-coated carbide grade for versatile milling and drilling use Suited for Steel, stainless steel and heat‑resistant alloys Designed for stable chip formation and edge security Applicable in combined drilling and light milling operations FAQ What materials can this insert machine effectively? The insert is designed for machining steel, stainless steel and heat‑resistant superalloys (P / M / S) and performs reliably under the thermal and mechanical demands of these groups. How does the 4R-E57 chipbreaker improve performance? The 4R‑E57 chipbreaker stabilises chip formation and evacuation, reducing chip re-cutting and improving surface consistency during drilling and peripheral cuts. Is the grade suitable for titanium and hard alloys? Yes; the WSP45G grade is intended to handle tougher, heat‑retaining materials such as titanium and certain superalloys while maintaining edge security. Can this insert be used for combined drilling and milling operations? The geometry and grade allow use in mixed operation sequences; the insert format supports rapid index changes to adapt between drilling and light milling tasks. Die Walter AG (brand presentation: Walter Tools) is part of the Sandvik Group and is a leading manufacturer of precision tools for metalworking. Protected trademarks and product names belong to their respective owners. Brand names and protected product designations are used for explanation only; there is no connection between Metav Werkzeuge and the mentioned brands. The offered article is an original, factory‑new product of the manufacturer. Walter Tools: Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen
P4841P-4R-F57 WKP35S Wendeplatten - Walter Tools
Take advantage of the combination of productive machining, stable chip control and broad material compatibility for efficient series production; the Tiger·tec Silver grade delivers extended tool life while the 4R‑F57 chipformer ensures reliable swarf evacuation. Order the insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. P4841P-4R-F57 WKP35S – drilling/boring indexable insert, Tiger·tec Silver, Walter Tools The P4841P-4R-F57 WKP35S is an indexable insert engineered for drilling and boring operations, optimised for high productivity in steel and cast iron applications. Tiger·tec Silver coating for extended life Optimised 4R‑F57 chipformer for stable chips Suitable for steel (P) and cast iron (K) Consistent performance from Walter Tools Stable chip control for uninterrupted production The insert’s 4R‑F57 chipformer is designed to generate predictable, compact chips during drilling and bore‑widening, reducing the risk of chip jams and tool breakage. By promoting controlled fragmentation and evacuation, the geometry supports higher feed rates and stable cutting conditions, which in turn shortens cycle times and minimises machine idle periods. The combination of a precisely profiled chipformer and an engineered cutting edge contributes to a consistent workpiece finish and fewer interruptions in serial production. Versatile material coverage to simplify tooling Rated for ISO groups P (steel) and K (cast iron), this insert reduces the need for multiple specialised grades in mixed‑material production environments. The WKP35S grade balances toughness and wear resistance, making it suitable for unalloyed and alloyed steels as well as abrasive cast iron. For shops machining diverse batches, this versatility lowers tool inventory and changeover complexity, while maintaining process reliability across typical workshop and light industrial applications. Robust substrate and coating for predictable service life Belonging to the Tiger·tec Silver series, the insert features a coated carbide substrate engineered for productive machining. The coating technology improves thermal stability and surface hardness at the cutting edge, while the substrate provides the toughness required for intermittent drilling and bore contact. These material characteristics translate into extended tool life and repeatable edge behaviour, enabling operators to plan tool changes and set reliable process windows for reproducible components. For tailored tool recommendations or availability of the Walter Tools P4841P‑4R‑F57 WKP35S insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and fast supply Technical Data SKU: P4841P-4R-F57-WKP35S-WALTER Article: P4841P-4R-F57 Designation: P4841P-4R-F57 WKP35S Manufacturer: Walter Tools Product type: Drilling/boring indexable insert Facts Material groups: P / K Series: Tiger·tec Silver Grade: WKP35S Chipformer: 4R‑F57 Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Application: steel and cast iron (ISO P / K) Geometry: optimised for drilling and bore enlargement Brand: Walter Tools FAQ Which materials can be machined with this insert? The P4841P‑4R‑F57 WKP35S insert is specified for ISO groups P (steel) and K (cast iron) and is intended for standard steel grades and a range of cast iron types. What is the primary benefit of the 4R‑F57 chipformer? The 4R‑F57 chipformer promotes compact, easily evacuable chips during drilling and boring, improving process stability and reducing the likelihood of chip‑related interruptions. How does the Tiger·tec Silver series affect tool life? The Tiger·tec Silver coating increases thermal resistance and wear protection at the cutting edge, which extends the insert’s service life under productive cutting conditions. Is this insert suitable for high‑speed drilling? The grade and geometry are optimised for productive feed rates and stable cutting; machining parameters should be selected according to workpiece material, machine rigidity and coolant strategy. What identification should be quoted when enquiring about this item? Please reference the designation P4841P‑4R‑F57 WKP35S or SKU P4841P-4R-F57-WKP35S-WALTER when requesting availability or cutting data. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named brands. The described article is original, factory‑new merchandise from the manufacturer.
P4841P-4R-F57 WSP45G Wendeplatten - Walter Tools
Take advantage of Tiger·tec Gold performance and the WSP45G grade for longer cutting life and dependable chip control; the result is fewer tool changes and more stable production. Order the insert directly via Metav Werkzeuge or ask the consultants for application advice. P4841P-4R-F57 WSP45G – Drill/reaming indexable insert, Tiger·tec Gold (Walter Tools) The P4841P-4R-F57 WSP45G is an indexable insert designed for drilling and boring operations, optimised for machining steel, stainless steel and heat‑resistant alloys. Tiger·tec Gold PVD coating Versatile application for P / M / S Optimised chip control 4R‑F57 Stable, wear‑resistant cutting edge Longer tool life through advanced coating and substrate The combination of the Tiger·tec Gold coating with a high‑performance coated carbide substrate provides increased wear resistance and sustained edge integrity under cyclic loads. This results in fewer interruptions for insert changes and predictable component tolerances in serial production. The coated surface reduces crater wear and protects the cutting edge against thermal and mechanical stresses common in deep drilling and boring, so machining windows remain stable and cycle times are maintained. Improved process stability with targeted chip control The 4R‑F57 chipbreaker geometry is designed to produce consistent chip shapes during holemaking, reducing the risk of tangling and improving evacuation through the flute. Better chip control lowers the likelihood of vibration and deflection, which in turn improves surface finish and hole accuracy. For shops aiming to increase throughput, the dedicated chipformer reduces rework rates and supports longer uninterrupted runs on automated drilling centres. Broad material range reduces tool variants and downtime The WSP45G grade is tailored for the material groups P, M and S — covering unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys or titanium. This versatility allows consolidation of the tool pool and simplifies tool selection across mixed‑material production. The grade’s toughness and PVD characteristics balance wear resistance and edge stability, delivering consistent results where heat generation and built‑up edge would otherwise shorten cutter life. For tailored application support and stock information on Walter Tools Tiger·tec Gold inserts, contact Metav Werkzeuge for specific machining recommendations and availability Technical data Article number: P4841P-4R-F57-WSP45G-WALTER Designation: P4841P-4R-F57 WSP45G Product type: Drill/reaming indexable insert Brand: Walter Tools Series: Tiger·tec Gold Grade: WSP45G Facts Material groups: P / M / S Chipbreaker: 4R‑F57 SKU: P4841P-4R-F57-WSP45G-WALTER Internal ID: P4841P-4R-F57-WSP45G-WALTER Special features PVD coated carbide grade Tailored for steel, stainless steel and superalloys Designed for stable cutting edge and wear resistance Suitable for drilling and boring indexable tool systems FAQ What materials can be machined with this insert? The P4841P-4R-F57 WSP45G is suitable for steel, stainless steel and heat‑resistant alloys (ISO groups P, M, S), offering broad applicability across mixed production. How does the 4R‑F57 chipbreaker affect machining? The 4R‑F57 chipbreaker promotes controlled chip formation and evacuation, reducing vibration and improving hole quality when using the insert in drilling and boring operations. Is the WSP45G grade a coated or uncoated carbide? WSP45G is a PVD coated carbide grade from the Tiger·tec Gold family, combining toughness with a wear‑resistant surface layer for longer service life. Can this insert reduce the number of tool variants required? Yes. The WSP45G grade’s versatility across P / M / S groups enables consolidation of tooling for multiple materials, which simplifies inventory and reduces setup changes. Is this indexable insert suitable for automated drilling centres? The insert’s stable cutting edge and optimised chip control make it well suited to automated drilling and boring centres where consistent performance and long runs are required. Manufacturer: Walter Tools; Tübingen, Germany. The Walter AG (brand: Walter Tools) with headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and trade names belong to their respective owners and are mentioned for explanatory purposes only; there is no affiliation between our company and the listed brands.
P4841P-5R-A57 WKP25S Wendeplatten - Walter Tools
High-performance Tiger·tec Silver grade and the 5R-A57 chipbreaker combine to deliver controlled chip formation and extended tool life in demanding drilling and boring operations. Take advantage of the insert’s suitability for steel and cast iron to increase productivity and consistency. Order directly via Metav Werkzeuge or consult our specialists for application-specific parameters. P4841P-5R-A57 WKP25S – Drilling/boring indexable insert, Tiger·tec Silver (Walter Tools) P4841P-5R-A57 WKP25S is a coated carbide drilling/boring indexable insert optimised for productive machining of steel and cast iron, offering stable cutting and reliable chip control. Tiger·tec Silver coating for extended tool life WKP25S grade for dependable performance 5R-A57 chipbreaker for controlled chips Coated carbide for high wear resistance Reliable results in steel and cast-iron machining The combination of WKP25S grade and Tiger·tec Silver technology provides a robust cutting edge tailored to the thermal and mechanical demands of ISO P and K materials. The insert’s coated carbide substrate balances toughness and wear resistance, which helps to maintain dimensional stability in drilling and boring cycles. This reliability reduces the frequency of tool changes and contributes directly to higher process uptime and repeatable part quality. Better chip control and process stability The chipbreaker 5R-A57 is engineered to form predictable, manageable chips during axial cutting, improving evacuation from the tool zone and lowering the risk of re-cutting. Controlled chip formation supports consistent surface finish and reduces secondary operations. For production environments where cycle time and scrap reduction are priorities, this geometry promotes safer, more productive runs while preserving the integrity of the cutting edge. Practical handling and grade choice for varied tasks The coated carbide construction and the WKP25S specification make this insert versatile across a range of steels and grey or nodular cast irons. The grade’s coating enhances thermal resistance and reduces abrasive wear, extending cutting life in continuous and semi-continuous operations. Selection of feeds and speeds will depend on machine rigidity and hole geometry; however, the design intent is clear—productive material removal with predictable tool performance and improved surface consistency. Contact Metav Werkzeuge for tailored cutting data and to source Walter Tools P4841P-5R-A57 WKP25S inserts for demanding steel and cast-iron applications Technical Data Article number: P4841P-5R-A57-WKP25S-WALTER Designation: P4841P-5R-A57 WKP25S Type: Drilling/boring indexable insert Brand: Walter Tools Core specifications Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: 5R-A57 Applicable material groups: P / K (steel / cast iron) Special features Coated carbide (beschichtetes Hartmetall) Optimised for stable chip formation and wear resistance Intended for productive drilling and boring operations FAQ Which materials can be machined with this insert? The P4841P-5R-A57 WKP25S insert is formulated for ISO P and K groups, that is steel and cast iron, and performs best where those substrate characteristics are present. What does the WKP25S grade offer? WKP25S is a Walter Tools grade offering a coated-carbide combination that emphasises wear resistance and edge stability for reliable performance in steel and cast-iron applications. What advantages does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating increases thermal and abrasive wear resistance, which extends tool life and supports consistent cutting behaviour in demanding cycles. How does the 5R-A57 chipbreaker influence machining? The 5R-A57 geometry promotes controlled chip formation and evacuation, improving process stability and reducing the chance of re-cutting or chip-related interruptions. Is this insert suitable for both finishing and heavy material removal? The insert is designed for productive machining across a range of severities; actual suitability for finishing or heavy removal depends on tool geometry and cutting parameters. Manufacturer: Walter AG (Walter Tools); Tübingen, Germany Protected trademarks and trade names are the property of their respective owners. Brand names and protected trade names are mentioned for explanatory purposes only. There is no connection between our company and the named brands. The offered item is an original, factory-new product of the manufacturer.
P4841P-5R-A57 WKP35S Wendeplatten - Walter Tools
The combination of Tiger·tec Silver coating and the WKP35S grade ensures stable chip formation and long tool life for demanding drilling and boring operations; benefit from reliable performance and consistent productivity on steel and cast iron. Order via Metav Werkzeuge or consult the Metav Werkzeuge team for application advice and compatibility information. P4841P-5R-A57 WKP35S indexable insert for drilling/boring, suitable for steel and cast iron — Walter Tools The P4841P-5R-A57 WKP35S is an indexable insert engineered for drilling and boring tasks, optimised to deliver consistent chip control and wear resistance when machining steel and cast iron. Tiger·tec Silver coating for durability Coated carbide grade WKP35S Chipbreaker 5R-A57 for stable chips Optimised for steel (P) and cast iron (K) Maximise throughput with a durable coated grade The Tiger·tec Silver series combines a modern coating technology with a hard-wearing substrate to deliver sustained cutting performance under typical steel and cast iron conditions. The WKP35S grade is a coated carbide specifically tuned to resist abrasive wear and maintain a sharp cutting edge over prolonged cycles. For manufacturing environments where cycle time and tool-change frequency are critical, this insert supports a measurable increase in uptime and reduces unscheduled interruptions, leading to a more economical machining process. Reliable chip control for safer, cleaner operations The integrated 5R-A57 chipbreaker geometry steers chip formation toward short, controllable fragments when machining both unalloyed and alloyed steel as well as cast iron. Stable chips minimise the risk of workpiece and tool damage and facilitate unattended or batch machining. Explaining the geometry briefly: the chipbreaker guides coolant and shear flow at the cutting edge, reducing the formation of long, stringy chips and improving surface finish without compromising material removal rate. Clear advantages in process security and surface quality By combining a tailored grade and proven coating, the insert improves process security—fewer edge failures, predictable wear patterns and a consistent surface result across runs. The coated surface reduces built-up edge and adhesion on the insert flank, which translates into more consistent part quality and fewer rework cycles. For production planners, that predictability is an operational asset: cycle times remain stable and inspection throughput improves. Application guidance and material compatibility Designed for the ISO material groups P (steel) and K (cast iron), the insert is suitable for a broad spectrum of turning and boring operations where robust wear resistance and reliable chip breakage are required. When selecting machining parameters, consider the grade's strengths: moderate to high cutting speeds and feeds that match the workpiece hardness and machine rigidity will yield the best compromise between tool life and productivity. For specialised materials or unorthodox setups, a cutting test under representative conditions is recommended to confirm optimal parameters. Contact Metav Werkzeuge for tailored application advice on Walter Tools Tiger·tec Silver inserts or to arrange a cutting test to verify compatibility with specific steels and cast irons Technical data SKU: P4841P-5R-A57-WKP35S-WALTER Designation: P4841P-5R-A57 WKP35S Brand: Walter Tools Core data Series: Tiger·tec Silver Grade: WKP35S Chipbreaker: 5R-A57 Material groups: P / K Special features and applications Coating: Tiger·tec Silver Material: coated carbide Main applications: steel and cast iron machining Product type: indexable insert for drilling/boring FAQ Is this insert suitable for stainless steel applications? No. The P4841P-5R-A57 WKP35S insert is specified for ISO groups P (steel) and K (cast iron) and is not listed for stainless steel machining. Which chipbreaker should be chosen for consistent short chips? The 5R-A57 chipbreaker integrated with this grade is designed to produce short, controllable chips when machining steel and cast iron, improving process safety and surface finish. What benefits does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade enhances wear resistance and reduces built-up edge, extending tool life and supporting more consistent cutting performance on steels and cast irons. Can the insert be used for high-speed machining? The combination of coated carbide and Tiger·tec Silver technology supports elevated cutting speeds compared with uncoated grades; final speed recommendations depend on machine rigidity and the specific steel or cast iron grade. How does WKP35S compare to other grades for cast iron? WKP35S is engineered to tolerate the abrasive nature and breaking-chip behaviour of cast iron, offering improved edge stability and predictable wear compared with general-purpose grades not tailored to cast iron. The Walter AG (brand appearance: Walter Tools) is one of the leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanation. There is no affiliation between our company and the mentioned brands. The offered article is an original, factory-new product of the manufacturer. Manufacturer/Responsible: Walter Deutschland GmbH; Derendinger Straße 53; 72072 Tübingen; Germany
P4841P-5R-A57 WSP45G Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Gold coating, versatile P/M/S material capability and the optimised 5R-A57 chipbreaker for stable cutting and longer tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Drilling/Boring indexable insert P4841P-5R-A57 WSP45G — Tiger·tec Gold by Walter Tools The P4841P-5R-A57 WSP45G is an indexable insert designed for drilling and bore-enlarging operations, engineered for demanding production in steel, stainless steel and heat-resistant alloys Tiger·tec Gold coated carbide WSP45G Suitable for steel, stainless steel and superalloys Stable cutting edge for demanding drilling Optimised chipbreaker 5R-A57 Reliable cutting performance for long production runs The insert combines the Tiger·tec Gold coating with a coated carbide substrate to deliver wear resistance and edge stability over extended cycles. This means fewer tool changes and a more predictable process window in high-volume machining. The PVD technology reduces flank and crater wear, which improves tool life and maintains dimensional stability during progressive tool engagement. As a result, production throughput is more consistent and downtime is reduced. Versatile material capability reduces tool inventory Designed for the ISO groups P, M and S, the grade addresses typical challenges across steel, stainless steel and heat‑resistant superalloys such as titanium. The combination of toughness and heat resistance enables safe chip formation where temperatures and adhesion tendencies vary. This versatility allows consolidation of tool assortments: one insert family covers several workpiece groups, simplifying ordering and lowering inventory complexity while preserving surface quality. Consistent chip control and improved surface quality The chipbreaker 5R-A57 is engineered for controlled chip formation in drilling and boring geometries, aiding evacuation and preventing entanglement in deep or interrupted cuts. Reliable chip control reduces secondary operations and minimises rework, leading to better first-pass yield and consistent surface finish. Where process stability is critical, predictable chip behaviour directly contributes to reduced cycle time and enhanced workplace safety. Practical integration into existing tool systems The designation P4841P-5R-A57 reflects the insert geometry and chipcontrol features that match common drilling and boring toolholders. Compatibility with established tool systems streamlines retrofit and replacement processes, enabling rapid setup without extensive requalification. The robust edge and grade selection focus on process reliability, which supports repeatable machining results and helps maintain production tolerances across shifts. Contact Metav Werkzeuge to discuss Walter Tools Tiger·tec Gold inserts and find the ideal P4841P-5R-A57 WSP45G solution for the specific application and machine setup Technical information Article number: P4841P-5R-A57-WSP45G-WALTER Description: Bohr-/Aufbohrwendeschneidplatte (Drilling/Boring indexable insert) P4841P-5R-A57 WSP45G Manufacturer: Walter Tools SKU: P4841P-5R-A57-WSP45G-WALTER Core data Material group: P / M / S Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: 5R-A57 Special features Coating: PVD layered (Tiger·tec Gold) Substrate: Coated carbide Applications: Steel, stainless steel, heat‑resistant superalloys (ISO P/M/S) Designation: P4841P-5R-A57 (indexable insert geometry) FAQ What materials is this insert suitable for? The P4841P-5R-A57 WSP45G insert from Walter Tools is suitable for ISO groups P, M and S, covering steel, stainless steel and heat‑resistant superalloys. How does the Tiger·tec Gold coating benefit machining? Tiger·tec Gold provides enhanced wear resistance and thermal stability, so the WSP45G grade sustains edge integrity for longer cycles and improves process reliability in drilling and boring operations. What role does the 5R-A57 chipbreaker play? The 5R-A57 chipbreaker optimises chip formation and evacuation, reducing risk of clogging in deep holes and improving surface finish with predictable chip control. Is the insert compatible with standard drilling and boring holders? The P4841P-5R-A57 geometry is designed for common indexable insert tool systems used in drilling and bore-enlarging, enabling straightforward replacement and integration. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (marketed as Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and product names are the property of their respective owners. Brand names are mentioned for explanatory purposes only. There is no affiliation between our company and the named brands. The offered item is an original, factory-new product from the manufacturer.
P4841P-5R-E57 WKP25S Wendeplatten - Walter Tools
Take advantage of the combination of Tiger·tec Silver coating and the WKP25S grade for reliable productivity and consistent wear resistance; the engineered 5R‑E57 chipbreaker ensures controlled swarf evacuation for fewer interruptions. Order directly via Metav Werkzeuge or consult their specialists for machining advice. P4841P-5R-E57 WKP25S drilling/reaming indexable insert — Tiger·tec Silver, for Stahl and cast iron (Walter Tools) A P4841P-5R-E57 WKP25S indexable insert engineered for efficient drilling and bore-enlargement operations in demanding workshop and production environments. Tiger·tec Silver coating for extended tool life WKP25S grade optimised for Stahl and cast iron 5R‑E57 chipbreaker for reliable chip control Suitable for drilling and bore enlargement applications Extended wear resistance through Tiger·tec Silver technology The Tiger·tec Silver line combines a modern coating stack with a robust carbide substrate to deliver consistent wear resistance and predictable tool life. The WKP25S grade is a coated carbide formulation tuned for the thermal and mechanical demands encountered when machining Stahl and cast iron; it balances toughness and hardness to resist flank wear and maintain a stable cutting edge. For shop floors where reproducible results and fewer tool changes matter, this insert provides a dependable baseline for process planning and reduces the frequency of regrinding or replacement. Stable chip control and process security with 5R‑E57 geometry The dedicated 5R‑E57 chipbreaker geometry promotes short, repeatable chips and controlled evacuation during drilling and bore-enlargement cycles, lowering the risk of clogging and tool breakage. Improved chip management directly supports higher process stability and reduces unexpected downtime on production lines. The insert’s geometry and coating work together to moderate cutting forces and thermal load so that the machining operation runs smoothly even under varying feed conditions, translating into fewer interruptions and higher first-pass yields. Practical productivity gains and economical machining Adopting this insert helps to streamline tool logistics and machining strategies: longer intervals between tool changes, stable surface finishes and predictable wear curves all contribute to lower unit costs. The combination of coated carbide technology and an optimised chipbreaker means less manual rework and more consistent cycle times. For production engineers and workshop managers seeking to improve throughput without complex setup changes, this solution supports faster ramp-up, higher availability of machines and improved overall equipment effectiveness (OEE). Contact Metav Werkzeuge today to discuss how Walter Tools Tiger·tec Silver inserts can be integrated into existing setups and to request availability or technical recommendations from Metav Werkzeuge specialists. Technical data Article number: P4841P-5R-E57-WKP25S-WALTER Designation: P4841P-5R-E57 WKP25S Type: drilling/reaming indexable insert Manufacturer: Walter Tools Series: Tiger·tec Silver Grade: WKP25S Chipbreaker: 5R-E57 Material class: P / K Facts SKU: P4841P-5R-E57-WKP25S-WALTER ISO designation: P4841P-5R-E57 WKP25S UID: P4841P-5R-E57-WKP25S-WALTER Special features Coating technology: Tiger·tec Silver Substrate: coated carbide Material application: Stahl (P), cast iron (K) Main use: drilling and bore enlargement Optimised for reproducible chip control and long tool life FAQ What materials is the insert designed for? The insert is specified for machining Stahl (P) and cast iron (K); the WKP25S grade and Tiger·tec Silver coating are tuned for these material groups. How does the 5R‑E57 chipbreaker improve performance? The 5R‑E57 chipbreaker produces short, controlled chips and prevents clogging during drilling and bore-enlargement, improving process security and reducing downtime for the P4841P-5R-E57 WKP25S insert. Is this insert suitable for high-volume production? Yes; the combination of coated carbide and an optimised chipbreaker makes the insert well suited to repetitive drilling applications where consistent tool life and minimal interruptions are required. Which product family and brand does this insert belong to? This insert is part of Walter Tools’ Tiger·tec Silver series and is supplied under the designation P4841P-5R-E57 WKP25S. Manufacturer / Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and registered trademarks are mentioned solely for explanatory purposes and do not imply any affiliation between our company and the named brands. The offered item is an original, brand-new product of the manufacturer (Walter Tools).
P4841P-5R-E57 WKP35S Wendeplatten - Walter Tools
Combining the Tiger‑tec Silver coating with the WKP35S grade and a dedicated 5R‑E57 chipbreaker delivers extended tool life and dependable chip control for drilling and boring operations; order the insert directly via Metav Werkzeuge or consult our technical advisors for application-specific recommendations. P4841P-5R-E57 WKP35S — Drilling/Boring indexable insert with Tiger‑tec Silver, 5R‑E57 — Walter Tools The P4841P-5R-E57 WKP35S is an indexable insert designed for drilling and boring tasks, optimised for production use on steel and cast iron components. Tiger‑tec Silver coating for extended tool life WKP35S grade tailored to steel and cast iron 5R‑E57 chipbreaker for consistent chip control Indexable insert for drilling and boring operations Longer tool life through advanced coating and substrate The combination of Tiger‑tec Silver surface technology and a coated carbide substrate reduces flank and crater wear under typical drilling conditions. Such coating technology lowers friction and improves heat resistance, which translates into a measurable increase in service life and fewer tool changes during production. For operations where downtime is costly, the insert’s wear resistance supports a steadier production rhythm and predictable tool-change intervals. Predictable chip formation and safer bore quality With the chipbreaker 5R‑E57, the geometry is tuned to produce stable, controlled chips during both drilling and boring cycles. Controlled chip formation reduces the risk of chip clogging and re-cutting, which in turn improves surface finish and dimensional consistency of bores. This targeted chip control supports higher feed rates and safer machine operation, especially in automated or long-run applications. Optimised for steel and cast iron according to ISO groups The WKP35S grade is specified for ISO groups P (steel) and K (cast iron), meaning the substrate and coating are selected to handle the heat and the abrasive wear typical of these materials. For mixed production lines that switch between unalloyed or alloyed steel and grey or ductile cast iron, a single insert grade offering broad material compatibility reduces tooling complexity and inventory while maintaining machining stability. Seamless integration into production tooling systems The insert designation aligns with standard indexable systems, making the component straightforward to fit into existing drilling and boring toolholders. The geometry of the insert supports reliable seating and repeatable positioning, which preserves bore tolerances across insert changes. Backed by Walter Tools engineering, this insert is suitable for machinists seeking to combine process reliability with simplified tool logistics. For process-secure drilling and boring, request a tailored recommendation for the Walter Tools P4841P-5R-E57 WKP35S through Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: P4841P-5R-E57-WKP35S-WALTER Designation: P4841P-5R-E57 WKP35S Grade: WKP35S Series: Tiger‑tec Silver Chipbreaker: 5R‑E57 Material groups: P / K Product type: Bohr-/Aufbohrwendeschneidplatte Facts Suitable materials: Steel (P) Suitable materials: Cast iron (K) Coating technology: Tiger‑tec Silver Coated carbide grade Special features Optimised for drilling and boring applications Stable chip formation with 5R‑E57 geometry Broad material coverage for mixed production Designed for reliable seating and repeatability FAQ What materials can this insert machine reliably? The P4841P-5R-E57 WKP35S insert from Walter Tools is specified for ISO groups P and K, meaning it is suitable for machining steel and cast iron. How does the Tiger‑tec Silver series benefit machining performance? The Tiger‑tec Silver series on the P4841P-5R-E57 WKP35S improves heat resistance and reduces friction, which helps to extend tool life and maintain consistent cutting performance during longer cycles. Is the chipbreaker suitable for automated drilling processes? Yes, the 5R‑E57 chipbreaker supports stable chip formation and evacuation, making the insert appropriate for automated drilling and boring where consistent chip control is required. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) with its headquarters in Tübingen is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik Group. Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for clarification only. There is no affiliation between our company and the mentioned brands. The item offered is an original, factory-new product of the manufacturer.
P4841P-5R-E57 WSP45G WSP45G Wendeplatten - Walter Tools
High productivity and stable chip control result from the Tiger·tec Gold coating and the WSP45G carbide grade, delivering consistent edge life in demanding drilling and boring operations. Order the P4841P-5R-E57 WSP45G via Metav Werkzeuge or consult our advisors for application guidance. P4841P-5R-E57 WSP45G drilling/boring indexable insert – Tiger·tec Gold (Walter Tools) P4841P-5R-E57 WSP45G is a drilling and boring indexable insert from Walter Tools, engineered to provide reliable cutting performance in machining steel, stainless steel and heat‑resistant superalloys. Tiger·tec Gold PVD-coated carbide grade Optimised chip control with 5R‑E57 geometry Suitable for steel, stainless steel and superalloys Robust edge life for high productivity Improved process stability through advanced coating and grade The Tiger·tec Gold coating paired with the WSP45G carbide composition provides enhanced wear resistance and thermal stability, which directly benefits cycle time and tool life. In practical terms, this means fewer insert changes and more uninterrupted machining, leading to measurable productivity gains. The design focuses on controlled friction and reduced built‑up edge, so the insert maintains a stable cutting edge under the higher temperatures typical for mixed steel and stainless steel operations. Broad material capability reduces tool inventory Designed for the ISO material groups P / M / S, the insert covers unalloyed and alloyed steel, stainless steel and heat‑resistant superalloys and titanium. A single insert type able to handle diverse materials simplifies tool planning and reduces the need for multiple specialised grades. The geometry and PVD coating promote secure chip formation in both ductile and tough materials, supporting consistent surface finish and repeatable machining results across a range of component types. Geometry engineered for reliable chip control and productivity The 5R‑E57 chipbreaker geometry ensures predictable chip flow during drilling and boring operations, which reduces the risk of stringing and rework. Controlled chip formation also helps protect the toolholder and machine spindle from shock loads, enabling higher material removal rates where process parameters allow. The insert construction supports fast indexability and stable seating, translating into shorter downtime during replacements and a more efficient production rhythm. Contact Metav Werkzeuge today for tailored application advice and to secure the P4841P-5R-E57 WSP45G from Walter Tools; technical consultants are available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: P4841P-5R-E57-WSP45G-WALTER Designation: P4841P-5R-E57 WSP45G Product type: drilling/boring indexable insert Series / grade: Tiger·tec Gold / WSP45G Material groups: P / M / S Facts Geometry / chipbreaker: 5R‑E57 Coating type: PVD (Tiger·tec Gold) Material code: P / M / S SKU: P4841P-5R-E57-WSP45G-WALTER Special features Coating technology: Tiger·tec Gold Carbide type: coated carbide (PVD) Application: drilling and boring operations Suitable for: steel, stainless steel, heat‑resistant superalloys Manufacturer: Walter Tools UID: P4841P-5R-E57-WSP45G-WALTER FAQ What materials is this insert designed for? The P4841P-5R-E57 WSP45G from Walter Tools is designed for machining steel, stainless steel and heat‑resistant superalloys (ISO groups P / M / S), offering stable chip formation and good edge stability in each group. Which series and coating does the insert use? The insert is supplied in the Tiger·tec Gold series with the WSP45G PVD‑coated carbide grade, a combination aimed at improved wear resistance and thermal performance. For which operations is the 5R‑E57 geometry optimised? The 5R‑E57 geometry is optimised for drilling and boring tasks, providing controlled chip breaking and consistent evacuation to support productive machining cycles. Can this insert contribute to reduced tooling costs? By covering multiple material groups with a single grade and offering extended edge life through the Tiger·tec Gold coating, the P4841P-5R-E57 WSP45G supports lower tool consumption and fewer index changes, which can reduce overall tooling costs. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen Protected trademarks and trade names are the property of their respective owners. Brand names and protected designations are mentioned for explanatory purposes only. There is no connection between our company and the brands named. The offered item is an original, factory‑new product from the manufacturer.
P4841P-5R-F57 WKP35S Wendeplatten - Walter Tools
Combine high wear resistance and consistent chip control from the Tiger·tec Silver series with the WKP35S coated carbide grade for reliable drilling and boring of steel and cast iron. Optimised geometry and a robust coating reduce tool changes and support steady production. Order through Metav Werkzeuge or consult our technical team for application matching. Bohr-/Aufbohrwendeschneidplatte P4841P-5R-F57 WKP35S — Tiger·tec Silver, for steel and cast iron (Walter Tools) A high-performance drilling and boring indexable insert, P4841P-5R-F57 WKP35S is designed for industrial machining of steel (ISO P) and cast iron (ISO K), featuring a coated-carbide grade and a chipbreaker-optimised geometry for consistent results Tiger·tec Silver coating for improved wear resistance WKP35S coated carbide grade for steel and cast iron 5R‑F57 geometry for consistent chip control Suitable for drilling and boring operations High productivity through durable coating and grade The combination of the Tiger·tec Silver coating and the WKP35S carbide grade delivers enhanced wear resistance and extended tool life in demanding drilling and boring tasks. The coating reduces abrasive and thermal wear on the cutting edge, which lowers downtime for tool changes and contributes to predictable machining cycles. For industrial workshops machining unalloyed, alloyed and quenched steels, this insert provides a balance between edge stability and economical running, improving throughput without compromising surface quality. Reliable chip control and geometry that stabilises processes The 5R‑F57 geometry incorporates an engineered chipbreaker that promotes short, controllable chips during through-hole and boring operations. Stable chip formation reduces the risk of re-cutting and tool damage, while facilitating safer chip evacuation in automated or manual setups. For production environments where cycle time and operator safety matter, consistent chip behaviour translates into fewer process interruptions and easier handling at higher cutting speeds. Application guidance and economical operation for series production Marked for ISO groups P and K, the insert is suitable for machining steel and cast iron, making it versatile for mixed-production environments. Coated carbide inserts like this one perform best with appropriate feeds and speeds matched to material and hole depth: higher cutting speeds exploit the coating’s heat resistance, while moderate feeds ensure stable edge life. For specific process windows or to verify compatibility with existing toolholders, Metav Werkzeuge’s technical consultants can advise on cutting data and insertion strategies to maximise cost-efficiency. Contact Metav Werkzeuge today for tailored cutting parameters, application checks or to order genuine Walter Tools indexable inserts — technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: P4841P-5R-F57-WKP35S-WALTER Article designation: P4841P-5R-F57 WKP35S Product type: Drilling/boring indexable insert Brand: Walter Tools Series: Tiger·tec Silver Facts Geometry: 5R‑F57 Grade: WKP35S Material code: P / K Applications: Steel (P), Cast iron (K) Special features Coating: Tiger·tec Silver Substrate: coated carbide Main benefits: wear resistance, stable chip formation, process reliability Typical use: industrial drilling and boring operations FAQ What materials is this insert suitable for? This indexable insert is specified for ISO groups P and K — suitable for machining steel and cast iron; the WKP35S grade and Tiger·tec Silver coating are tuned for these materials. What advantage does the Tiger·tec Silver coating provide? The Tiger·tec Silver coating on the WKP35S grade enhances heat and abrasive wear resistance, extending edge life and supporting higher cutting speeds in drilling and boring tasks. How does the 5R‑F57 geometry affect chip formation? The 5R‑F57 geometry includes a chipbreaker shape that promotes short, consistent chips, improving evacuation and reducing the risk of re-cutting in production environments. Is this insert compatible with standard drill/boring holders? The insert designation P4841P-5R-F57 WKP35S indicates the geometry and seat form; compatibility depends on the holder type — verify seat form and clamping system before mounting. Can this insert be used in automated production lines? Yes. The coated-carbide grade and chip-controlling geometry make the insert suitable for automated drilling and boring processes, where predictable tool life and chip behaviour are essential. Manufacturer/Responsible: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen The Walter AG (brand appearance: Walter Tools) is one of the world’s leading manufacturers of precision tools for metalworking and is part of the Sandvik group. Protected trademarks and product names are the property of their respective owners. Brand names and trademarks are mentioned for explanatory purposes only; there is no affiliation between our company and the named manufacturers. The offered item is an original, brand-new product from the manufacturer.
P4841P-5R-F57 WSP45G WSP45G Wendeplatten - Walter Tools
Efficient holemaking with a Tiger·tec Gold PVD-coated WSP45G grade delivers extended edge life and predictable chip control; the 5R-F57 chipbreaker stabilises swarf for repeatable results. Combine productive cutting, wide material capability (P / M / S) and consistent wear behaviour for reliable series production. Order via Metav Werkzeuge or consult the technical team for material-specific cutting data. P4841P-5R-F57 WSP45G Drill/Boring Indexable Insert — Tiger·tec Gold (Walter Tools) A P4841P-5R-F57 WSP45G drill/boring indexable insert optimised for high-productivity holemaking in steel, stainless steel and heat-resistant alloys Tiger·tec Gold coating for longer life Grade WSP45G for versatility Suitable for Steel, Stainless and Superalloys Chipbreaker geometry 5R-F57 for stable chips Greater productivity through proven grade technology The combination of Tiger·tec Gold coating with the WSP45G coated carbide grade provides a balance of wear resistance and toughness that supports longer tool life in interrupted and continuous drilling operations. Designed for groups P / M / S, the insert copes with typical heat loads and varying chip forms encountered when machining unalloyed and alloyed steel, rostfreier Stahl and heat-resistant superalloys or titanium. This technical pairing reduces unscheduled tool changes and increases uptime, which translates into a measurable productivity gain on the shop floor. Stable chip control for consistent surface quality The engineered chipbreaker 5R-F57 and the insert geometry promote controlled swarf formation and evacuation during boring cycles. Stable chips reduce the risk of built-up edge and help to maintain a consistent contact zone, improving surface finish and reducing rework. For mixed-production environments where material mixes can change between batches, the insert’s geometry supports repeatable performance, lowering process variability and strengthening process reliability under higher feeds and moderate cutting speeds. Simplified tooling strategy for mixed materials For workshops handling a range of component alloys, the WSP45G grade offers a pragmatic compromise between resistance to flank wear and sufficient edge stability for tougher materials. The insert’s adaptability to steel, rostfreier Stahl and superalloys makes it suitable as a standard stocking item, simplifying inventory management while keeping selection decisions straightforward. Where application data is required for specific workpiece alloys or cycle parameters, the Walter Tools grade recommendation helps to select cutting values that balance tool life and component integrity. For demanding drilling and boring operations, specify Walter Tools Tiger·tec Gold inserts such as the P4841P-5R-F57 WSP45G and contact Metav Werkzeuge for availability and tailored cutting data — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: P4841P-5R-F57-WSP45G-WALTER Designation: P4841P-5R-F57 WSP45G Product type: Drill/boring indexable insert Series: Tiger·tec Gold Grade: WSP45G Chipbreaker: 5R-F57 Material groups: P / M / S Manufacturer: Walter Tools Core data UID: P4841P-5R-F57-WSP45G-WALTER Special features PVD-coated carbide grade Balanced wear resistance and toughness Suitable for steel, rostfreier Stahl and heat-resistant superalloys/titanium Chip control geometry 5R-F57 Optimised for productive holemaking and stable edge life FAQ Which materials can this insert machine? The P4841P-5R-F57 WSP45G insert is formulated for machining steel (P), rostfreier Stahl (M) and heat-resistant superalloys/titanium (S), providing good edge stability across these groups. What benefits does the Tiger·tec Gold technology bring? Tiger·tec Gold coating on the WSP45G grade increases wear resistance while retaining toughness, allowing the insert to withstand the thermal and mechanical stresses of holemaking for longer tool life. How does the 5R-F57 chipbreaker affect machining? The 5R-F57 chipbreaker produces controlled chips and improves evacuation, which helps to reduce built-up edge and supports consistent surface quality in drilling and boring cycles. Is this insert suitable for mixed-production shops? Yes, the WSP45G grade is intentionally versatile; it simplifies tooling choices by performing reliably across common steels, rostfreier Stahl and select high-temperature alloys. Can the insert improve process stability? By combining a robust grade with a tailored chipbreaker, the insert enhances process security and repeatability, reducing variability and unplanned tool changes in serial machining. Walter Tools: Walter Deutschland GmbH, Derendinger Straße 53, 72072 Tübingen, Germany Protected trademarks and trade names belong to their respective owners. Brand names are mentioned for explanation only; there is no affiliation between our company and the named brands. The offered item is original, brand-new material from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com